1 Technical notes on version 2.5
9 Multiple command/console per runscript
10 console command in runscript
13 State file updated on job term
16 Duplicate Job directives
17 - Allow Duplicate Jobs
18 - Allow Higher Duplicates
19 - Cancel Queued Duplicates
20 - Cancel Running Duplicates
21 Ensure they work with RerunFailedLevels
25 Improved status commands for Bat
26 Spooling/despooling status
27 Implement ftruncate for NFS devices
28 Add long term statistics job table
31 separator in console (!$%&'()*+,-/:;<>?[]^`{|}~)
36 kes Implement console 'wait mount' command. Doesn't yet work.
37 kes Implement timeout=nn on console 'wait mount timeout=nn' command.
38 kes Break the do_swapping into do_unload, do_swapping, and
39 do_load. It is much more logical that way.
40 kes Implement a set_dcr_from_vol subroutine in acquire.c for
41 reading volumes. This allows the dcr to be refreshed after being
42 zapped when the wrong volume is mounted.
43 This should fix bug #1126 -- During multiple tape restore, bacula
44 does not ask for physical tape change, but rereads same tape
46 kes Apply patch submitted for bug #1107 with a small modification.
47 This fixes a bug where bcopy copied too many records.
48 kes Make some tweaks to bsmtp based on patch submitted in bug #1124.
50 kes Make the default bat restore Pool be Any. This fixes bug #1118.
52 kes Remove debug statement that crashes the SD at the end of
53 a tape during restore. Fixes bug #1125.
55 kes Implement Win32 bat changes made to Branch-2.4
57 kes Tweak separator command in console to start disabled and
58 allow defining no separator character. Also make code a
59 bit more fault tolerant.
60 kes Make btraceback write the traceback to the working directory
61 before attempting to mail it.
62 kes Add a RFC to Projects.
64 kes Attempt to implement a kludge to make Qt work with bat
66 kes Setup rstorage correctly. Virtual backups are working.
68 kes Move setting JobLevel and JobType into a method, which should
69 allow completing Virtual Backups.
70 kes Fix verify jobs to work again.
72 kes Virtual Backup tweaks -- it is close to working.
74 kes Ensure that SD tried to mount a volume not in an autochanger
75 at least once before asking for operator intervention.
76 kes Make SD aware of Virtual Backup jobs.
77 kes Add VirtualFull for bat.
78 kes Changes to get read storage correct for Virtual Backup.
80 kes Remove old code from label.c
81 kes Split display_display_info() out of write_bsr_file()
82 kes do_vbackup_init() working -- i.e. bootstrap file built.
83 kes Change Bacula trademark owner from John Walker to Kern Sibbald
84 kes First non-working cut of vbackup
85 kes Correct FD heartbeat code to use volatile variable accessed by
87 kes Zero thread id with memset if on Win32 in case it is a struct.
88 kes If cannot create JobMedia record, continue to try to write eof
89 and clean up in block.c
91 kes Add code to interface OpenSSL to new Win32 pthreads code which
92 used a structure for thread_t.
94 ebl tweak bat for win32 compilation
96 ebl Remove tokyo cabinet from the source
97 ebl Update configure/autoconf to support berkeley DB
98 ebl Add a sort to db_get_file_list() to improve bsr construction time.
100 kes Add a mtx-changer.conf file that is not overwritten during
101 an upgrade. It fully configures the mtx-changer script.
102 kes Clear in-use bit on vol when unused while swapping.
104 kes Remove sleep at end of ./bacula
105 kes Clear hash packet for hardlinked files correctly. This corrects
106 a long standing bug where hardlinked files selected individually
107 would occasionally not be restored.
109 kes Apply Eric's patch to ensure that autoprune does not return
110 a Volume not in the autochanger unless requested to do so.
111 kes Correct bat restore display of multiple drives. This fixes
113 kes Do find_a_volume() each time an unload is done. This
114 fixes the failure of maxvol2-test.
116 kes Add some SD debug code.
117 kes Do find_a_volume() each time an unload is done.
118 kes Apply Joao's DBI patch that adds easier configuration of DBI drivers,
119 and adds --with-db-port to ./configure.
120 kes Use Qmsg() in job.c watchdog callback.
122 kes Release main control rwlock if ABORTing.
123 kes Make watchdog connect timeout queue messages rather than sending
124 directly to avoid lock conflicts with the real thread.
125 kes Add const char in dbd.c to avoid compiler warnings.
126 kes Fix python compiler string warning. Note, IMO the GNU C++
127 compiler guys have made a *very* bad change to their compiler.
128 They now force all strings to be 'const' unless you explicitly
129 cast them, which is extremely ugly and ruins nice code as well
130 as creates a lot of useless work.
132 kes Fix mtx-changer to detect both versions of Ubuntu (Debian)
133 mt. This fixes bug #1116.
134 kes Add const in python files to reduce compiler warnings.
135 This may have to be backed out because of later compiler
137 kes Fix failure of 2drive-concurrent-test. Always read label;
138 clear_unload() only after drive is defined in acquire_for_read().
140 kes Generally clean up the manual tape loading code. The main
141 conceptual change is that when a volume is marked to be unloaded,
142 its volume name is retained, and it is only marked as unloaded
143 when either the autoloader says it is unloaded or another tape
144 is read on that drive.
146 kes Add debug code and refactor subroutine in stored/mount.c
147 kes Fix format problem in bscan output reported in bug #1105.
148 ebl Fix get_next_volume_for_append logic with autochanger
149 - use pruned volumes if found
150 - don't reset the inchanger flag after getting a recycled volume
152 Fix recycle_oldest_purged_volume to take InChanger flag in account
154 ebl Add mmap/unmmap implementation for tokyodbm under win32
156 kes Make first step toward eliminating globals from config
157 scanning. Also should be a workaround for FORTIFY_SOURCE
158 GNU C bug -- fixes bug #1042.
160 kes Apply duplicate job tests to restarted jobs.
161 kes Copy more data when restarting a job so that run
162 overrides are kept. This should fix bug #1094.
164 kes More word alignment cleanup.
165 kes Fix bug where SD did not ask operator if the device could not
166 be opened. Reported by Eric.
168 kes Add dbuser to DIR conf file (replaces user).
169 kes Add --with-db-password to ./configure
170 kes Fix regress to handle db_password.
171 ebl Add new "status storage slots" that list autochanger
173 ebl Update vtape driver to compile only under Linux.
174 ebl Fix a bug when restoring with a wrong mediatype.
176 kes Eliminate ints from conf files and structures to avoid
177 word alignment problems
179 kes Fix bug reported by Scott Barninger where the bacula script
180 refers to scripts in the wrong directory. Needed to meet the
181 requirements of recent FHS location changes.
182 ebl Disable vtape for FreeBSD.
184 ebl Modify disk-changer to check if slot contains something before
187 ebl Fix vtape on win32 and debian.
188 ebl Fix autoselect patch (cause segfault).
190 ebl Fix autoselect option broken for a while. Fix #1089. Need some
191 work with StorageId to be able to use a particular drive in a
194 ebl Rename vtape to vtape.
195 ebl Update vtape driver.
197 ebl Modify vtape driver to avoid sparse file.
198 kes Add make clean of qt-source directory during ./configure
199 kes Store last block number written to tape in DEVICE and
200 use it for testing for correct last block on EOT.
202 Release Version 2.4.0:
206 kes Make sure to clear JS_WaitMedia when operator mounts a Volume.
207 This fixes bug #1095.
209 kes Add create_postgresql_database.sql to Win32 installer. Should
210 fix problem reported by Juilio Monteiro.
211 kes Get correct slot when auto unloading a device. This fixes bug
214 kes Fix multiple media restore.
215 kes Make DEVICE Slot private and access it via a method.
216 Allows better control over when it is set and cleared.
217 kes Fix possible seg fault if SQL error.
219 kes Add Martin's fixes to argument scanning for the estimate
220 command. This fixes bug #1093.
221 kes Add debug code to SD.
222 kes Fix renaming a Volume, which used the wrong Volume name.
224 kes If operator has rewind tape, print warning, release tape and
225 try once more. If tape is positioned somewhere, something went
226 wrong, so mark the tape in error and try once more. Previously
227 this error was fatal, now it produces an error message.
228 kes Ensure correct volume name displayed during restore
229 kes Ensure that Volume is mounted for restore.
231 kes Fix a few more Coverity reported problems.
233 kes Apply Allan Black's status dir job count patch.
234 ebl Add information about IMPORT/EXPORT slots in mtx-script.
235 kes Enhance a couple of SD debug messages.
236 kes Tweak unload flag setting and ensure it is set during swap.
238 ebl Fix #1091 about bad output in estimate command.
240 kes Modify autochanger locking to attempt to avoid race
242 kes Make sure device not busy before doing label command.
243 kes Display open() errors except when polling. Previously too
244 many were suppressed. This should fix bug #1070.
245 kes Fix Win32 reparse points. Bacula will not recurse into any
246 reparse point directory, including mount points, unless the
247 directory is explicitly mentioned at the top level (same as
248 with Unix). A file that is linked to another file will be
249 backed up -- much as Unix does for hardlinked files.
250 This fixes bug #1041.
252 kes Remove double quotes from ChangeLog and ReleaseNotes
253 kes Remove StorageId test when pruning and recycling (Eric's changes).
254 kes Remove old form of locking when getting volumes -- causes deadlock.
255 kes Change bat dirstat layoutWidget to dirstatlayoutWidget to make
256 the name unique and to eliminate compile time error.
257 kes Add accurate.o to Win32 FD Makefile
259 kes Fix cats dll build on Win32 after db_update_job_end_record
260 calling sequence change.
261 ebl Switch to tokyo dbm instead of htable in accurate code
262 ebl Include tokyo dbm to bacula source tree
264 kes Fix buffer overruns detected by Coverity.
266 kes Tweak joblog display.
268 kes Implement --without-qwt
269 kes Fix layout of restore tree dialog
270 kes Add configure bat QWT libraries, so that bat can be built
271 with or without the QWT libaries.
273 ebl Add dummy tape driver for regression tests.
274 kes Make sure we unload the right slot when swapping.
276 kes Add debug times, reduce size of two-pool-changer test
278 ebl Tweak autoconf scripts for vtape
280 kes Improve SD reserve debug code.
281 kes Testing an improvement to free up volumes no longer in use.
283 kes Rework SD acquire for read to handle autochanger Volume
285 kes Implement regression that explicitly tests swapping a Volume
286 from one drive to another.
287 kes Enhance disk-changer to detect most error conditions.
288 kes Fix SD code so that it properly swaps a Volume between drives.
289 This fixes bug #1083.
291 kes Apply libdbi patch from Joao Freitas for regress and for
292 Bacula trunk. Regress now works with libdbi. Nice.
293 kes Apply .nobackup patch from bug #1077 submitted by
295 kes Apply Bastian Friedrich's patch that adds %p to edit the pool
296 name into jobs cloned via the run directive.
298 kes Prevent a Volume that is being swapped from being freed from
299 the volume list. This will most likely fix, at least partially,
301 kes Fix strippath so that it does not get a buffer overrun and crash FD.
302 This fixes bug #1078.
303 kes Remove 50 millisec wait in SD that broke debugger.
304 ebl Add MaxRunSchedTime option that specifies the maximum allowed time
305 that a job may run, counted from when the job was scheduled.
306 ebl Fix MaxWaitTime option that specifies the maximum allowed time that
307 a job may block waiting for a resource, counted from when the job starts
308 ebl Rename (add) Max(Incr|Diff|Full)WaitTime to Max(Incr|Diff|Full)RunTime
309 kes Apply patch from bug #1076 by Tullio Andreatta <t.andreatta@troppoavanti.it>
310 that implements multiple commands per line in the console when using
311 readline. Modify the default to use a semicolon as the command separator.
313 ebl Fix SQL query in migration code.
314 ebl Make accurate mode with hash disk pass regression tests
316 ebl Implement first cut of accurate backup with hash disk.
318 kes Force unload of volume when wrong volume mounted in SD.
320 kes Fix bat seg fault at termination.
321 kes Add Bacula generated version to bat about box.
324 kes Experiment with allowing multiple read jobs.
325 kes Move final volume swapping code to DCR method and
326 call it from acquire_for_read().
327 kes When wrong volume is mounted during read, unload_autochanger.
329 kes Integrate the libdbi changes from Joao Henrique Freitas
331 kes Stop searching for Volumes in SD askdir if DIR returns the
332 same volume name twice in a row.
333 kes Close bat console windows first to eliminate error message
336 kes Tweak the swap Volume from one drive to another code so that
337 it now seems to work.
338 kes Resolve several problems with recycling that broke the new
339 code (these problems are in 2.2.9 as well).
340 kes Remove the volume lock when calling the sysop code.
341 kes Don't mark a reserved volume with no writers as unused otherwise
344 kes Rework class structures for VOLRES, DCR, and DEVICE to make
345 the method names a bit more logical, and for more logically
346 handling the responsibilities.
348 kes Remove redundant code in terminating the scheduler that just
349 causes a seg fault in many cases.
350 kes Cleanup releasing a volume and make it a DCR method.
351 kes Improve algorithm for detecting pre-reserved volume and
354 kes Tweak volume swapping code so it works.
355 kes Correct name overloading in mount.c
356 kes Replace released flag in VOLRES with reserved and add access
357 methods for the VOLRES class.
358 kes Prevent volume from being released while being swapped.
359 kes Apply Bastian Friedrich's edit codes patch for the bpipe-fd
361 kes Apply Bastial Friedrich's edit pool=%p patch for run clone
363 kes Refactor parts of stored/mount.c
365 ebl Add sanity checks for VolWriteTime and VolReadTime
366 ebl Take care of bad clock changes while computing VolWriteTime
367 and VolReadTime. This should fix or limit #1066
368 kes Correct error string numbers in dird/catreq.c
369 kes Restructure reserving, acquiring, and mounting volumes. Calls to
370 autochanger are deferred for mount.c -- simplifes the code.
372 kes Do not prune any running job. It just fails the job.
373 kes Lock the volumes when changing dev->reserved_device and marking
374 the volume unused otherwise the device can get reserved by
375 another job before the volume is released, thus blocking it.
377 kes Correctly detect Ubuntu systems, and add ubuntu platform directory.
378 kes Fix bug #1063, reuse of freed ptr in list nextvol.
379 kes Release regex compile buffer in filed/job.c
380 kes Add proper type of const char in sql_create.c
381 kes Turn off debug in daemon termination routines
382 kes Move free_volume_list() before devices are freed in stored.c
383 kes Fix reference to uninitalized stack variables in bregex.c.
384 This should correct bug #1067.
386 kes Fix possible seg fault in SD when freeing a volume entry.
388 kes Implement unload_dev() before swap device.
389 ebl Add statistics prunning with option and menu
390 kes Separate unload_dev() from unload_other_device() in autochanger.c
392 kes Apply patch from bug #1069 that corrects spurious error messages
393 when ACLs enabled on SGI but no ACL exists.
394 ebl Fix small segfault in bacula-sd when debug level is 500
395 kes Modify run_program() and run_program_full_output() to use
396 call by reference for the results string. This corrects a long
397 standing problem where the address of the string may be changed
398 in the subroutine but not in the calling program.
400 kes Re-enable code to remember last volume mounted on a non-tape
402 kes Add patch supplied in bug #1068 that fixes a SD crash when using
403 a Virtual autochanger.
404 kes Generate correct JobMedia records during spooling/despooling when
405 running concurrent jobs. Thanks to Tom Ivar Helbekkmo
406 <tih@hamartun.priv.no> for excellent analysis and testing.
408 kes Tweak hash algorithm for htable using Martin Simmons idea
409 for doing a circular shift.
410 kes Remember what volume is in VTLs (previously turned off for
412 kes Analysis of JobMedia records by Tom Ivar Helbekkmo <tih@hamartun.priv.no>
413 pointed out some problems in creating JobMedia records during
414 spooling with concurrent jobs. Fix the problem by updating the
415 start file position before despooling and generate a jobmedia
416 record at the end of despooling.
418 kes Fix handling of JobMedia records during spooling and when a
419 Volume is changed without actually writing data to the Volume.
421 kes Rework certain SD locking based on gdb tracebacks of deadlocks
422 sent by Eric. This code now uses only the volume_lock() rather
423 than the reservations lock when at EOM and acquiring a new
425 kes Ensure only one exit point in several subroutines.
427 kes Implement bsock code to permit locking. Use the new code in Verify
428 in the FD to prevent the heartbeat thread from disrupting the Verify
429 data sent to the Dir.
430 kes Modify SD locking to eliminate locking the reservations system from
431 outside the system. Use the volume lock when getting media data
432 and reserving a new volume at end of media.
433 kes Add Eric's volume_unused() fix to stored.c so that Volumes found
434 when SD starts are not locked into place.
436 kes Fix error compiling runscript code on 64 bit machines.
437 kes Tweak Win32 mount point code.
438 kes Fix a couple of bugs in the accurate code (bad sscanf, buffer not
439 cleared giving bad file estimate).
440 kes Implement BIG_MALLOC in htable code. Runs 2.5 times faster for
443 kes Keep Schedule run lists in order as suggested by
446 kes Implement autostart scripts for Debian.
447 ebl Implement upgrade catalog scripts.
449 ebl Apply jobstat patch for long term statistics. Have to implement
450 purge stats command and upgrade scripts.
451 kes Fix mtx-changer.in for broken Debian mt program.
453 kes Fix large number of JobMedia records reported by Eric Bollengier.
455 kes Apply doc fix from bug #1062.
456 kes Resolve crash and improper restore wx-console Win32 restore
457 GUI. Fixes bug #1065.
458 kes Update Win32 wxWidgets to latest version.
459 kes Attempt to do correct handling of Win32 mount points. Should
461 kes Fix Win32 FD backup/restore memory leak due to improper termination
462 of BackupRead/Write. This fixes bug# 1038.
464 ebl Reduce memory usage for accurate backup, working only with ctime
465 and mtime. (not all Lstat field)
466 About 40MB for my Linux system (400.000 files)
468 kes Add dcr->reserved_volume flag that allows us to release a volume
469 even if it is not vol->released. This allows maxvol2 to work when
470 Volumes expire and we are already writing to the device (i.e. a
471 volume is pulled out from under us by another job terminating after
472 we reserve the drive).
474 ebl Permit multiple command/console per runscript definition.
475 RunScript { command = /bin/true ; command = /bin/false ... }
476 ebl Add RunsWhen = AfterVSS to runscript. You can execute a command
477 (restart an application) just after the VSS snapshot on windows.
478 kes Don't zap dcr values during release_volume() as they might
479 have the next Volume to be mounted.
480 kes Fix AIX prototype.
482 kes Second cut of drive switching during backup.
485 kes Update Win32 version of wxWidgets to most recent version.
486 kes Tweak Copy job details.
487 kes Rework dir_find_next_appendable_volume to make a bit more effort
488 to find a suitable volume before giving up.
490 kes Make ask_sysop_to_create... to return if waken from wait.
491 This helps get out of blocked conditions.
492 kes Experimental implementation of switch_device in reservations.
493 kes Implement FD version to allow easier protocol changes.
494 kes Add Plugin Options string -- not yet passed to FD.
495 kes Implement PluginOptions ACL.
497 kes Attempt to correct problems with restores with autochangers and
498 use counts going negative
499 kes Rework SD status command and implement API for bat. Implements
500 header, runing waitreservation, devices, volumes, spooling,
501 and terminated status keywords.
502 .status storage=xxx <keyword>
503 kes Clarify TLS error message by adding double quotes around name.
504 kes Simplify SD/FD status code by putting api flag in STATUS_PKT
505 kes Pass jcr to tls routines so debug messages can be handled better.
506 kes Rework jobq resource allocation code, and possibly fix a bug
507 that caused reference counts to get out of sync.
509 kes Rename fd/dir plugin to use Bacula standard underscore.
510 kes Plugin work -- bring dir up to fd level.
511 kes Start implementation of VTL code
512 kes Fix Win32 build after adding new cats subroutine.
514 kes First cut at Duplicate Job implementation.
516 kes Fix bugs in MaxFullInterval and Implement MaxDiffInterval.
517 kes Start PluginOptions string, and refactor a bit of ua_run.c
518 ebl Apply Allan patch that permit to reset recyclepool.
520 kes Test patch -- possible fix or improvement for bug #1053
521 kes Refactor FD and SD status commands to permit new API code in
522 SD, and to fix Win32 build.
523 kes Win32 build is now working.
525 kes Implement 'MaxFullInterval' and start 'MaxDiffInterval' based on
526 some ideas in patch from Scott Bailey.
527 kes Begin implementation of duplicate Job control.
528 kes Fix some of Win32 build after recent additions.
529 kes Apply patch from Frank Kardel that implements 'honor no dump flag',
530 which causes the FD to detect whether or not the OS has the
531 honor no dump bit (*BSD systems), and if so, to skip backing up
532 any file with this bit set. The feature is enabled by setting
533 'honor no dump flag = yes' in the Options section of a FileSet.
535 kes Correct po warning message with datarootdir
536 kes Implement more code in dird.c to put configuration parsing in
537 a class rather than use globals.
538 kes Restructure SD status command for implementation of bat API
541 kes Suppress incorrect 'Will not descend from x into y' messages.
542 kes Eliminate FORTIFY_CODE=2 bug, and make first cut at removing
543 daemon globals used by parser.
544 kes Apply Joao's patch to separate DB_TYPE and DB_PROG in configure.
546 kes Fix free of plugin_list when none exists.
548 ebl Apply accurate project patch.
550 ebl Fix a segfault when using strip_path option. (Use of pm_strcpy
551 on non-mempool object)
552 kes First cut of converting FD .status to work with bat API.
554 .status client=XXX header
555 .status client=XXX running
556 .status client=XXX terminated
557 kes Implement first cut of Copy Job.
558 kes Implement Catalog in Pool resource. It overrides catalog specified
559 in the Client resource.
561 kes Apply patch (with some difficulties) from Joao Henrique Freitas
562 <joaohf@gmail.com>, which adds support for libdbi as a Bacula
564 kes Add patch from Martin Schmid scm@apsag.com that checks to see if
565 ftruncate() actually works. In the case of some (cheap) NAS devices,
566 it does not, and so recycling NAS Volumes does not work. The code
567 simply unlink()s the file, then recreates it. This fixes bug #1011.
569 kes First incomplete cut of big malloc blocks for htable.
570 kes Tweak plugin code.
572 kes Plugin debug code + tweak a couple bat dialog layouts
574 kes Fix creating first JobMedia record during Migration to include
575 proper index. This caused slow restores of migrated jobs.
576 kes Temp fix to plugin name file_index.
577 kes Bacula backed up and restored a MySQL database.
579 kes Implement plugin restore.
580 kes Implement parsing of db_driver to give db_type index.
582 kes First cut of plugin restore code.
583 kes Fix bug #1047, which had a heap overrun when stripping certain paths,
584 and do not strip paths on symbolic links.
585 kes Set catalog backup database and user name from values specified on
586 the ./configure line.
587 ebl Fix #1031 about wrong pool source information in job report.
590 kes Remove a redundant jcr argument to find_files, match_files, and
592 kes Implement '.status dir header|scheduled|running|terminated' that
593 prints the requested status section. With the exception of the
594 header, the other reports have fields separated by tabs (\t).
596 kes Apply patch from Peter Much <pmc@citylink.dinoex.sub.org> that fixes
597 a resource embedded run command to find a since time if no explicit
598 since time was supplied on the command line.
599 kes Apply state-file.patch sent by Allan Black <Allan.Black@btconnect.com>
600 that updates the state file at job termination time in addition to
601 when the daemon terminates.
603 kes First version where a plugin did a backup.
604 bpipe-fd.so created a backup file, wrote a test
605 string to it, and Bacua could restore this fabricated file.
607 kes Implement DB Driver = string for the DBI driver.
608 kes Remove all old bdb_xxx.c code. Add dummy routines to bdb.c
609 kes First cut of code for loading Win32 plugin dlls. Implement
610 dlopen, dlsym, dlclose, and dlerror in src/win32/compat/compat.cpp
611 and implement a dlfcn.h file based on opengroup's definitions of
614 kes First cut plugin directives.
616 kes Apply patch from bug #1049 to prevent stripping the path on a
618 kes Attempt to fix bug #1047 where stripping a path corrupts the
619 heap. Waiting for feedback.
620 kes Correct the Mount message not to suggest labeling a new tape
621 when doing a restore. Submitted by email by John Stoffel.
622 kes Attempt to work around gcc FORTIFY_SOURCE bug that crashes the
623 FD by using casting. Reported in bug #1042.
625 kes A bit of crypto cleanup. More later.
627 Release Version 2.2.8
629 kes Apply patch from Martin to correct bug #1040, bscan sets existing
631 kes Fixed important spelling error in doc -- bug #1045.
633 ebl Fix bextract to be able to extract non-portable Win32 data to
635 kes Move initialization of read/write res lock earlier in the code.
636 This fixes the crash with a null conf file. This fixes bug
638 kes Redefine CURES in lib/parse_conf to be URES and move it all
639 into lib/parse_conf.c -- this responds to bug #1042, but does
640 not fix it. The fix is not to compile with FORTIFY_SOURCE.
641 kes Backport to 2.2.8 fix de-referencing a NULL pointer in the scanner from
642 the trunk SVN. I don't think this was reported as a bug.
644 ebl Fix a bug during tape initialization with MTSETDRVBUFFER.
646 kes Fix Win32 build with new .def files and DLL_IMP_EXP ...
648 kes Add DataDespooling and DataCommitting status (committing is
649 the last despooling).
650 kes Finish implementation of new reservations code noted below.
652 kes Fix bsnprintf for float point numbers. I broke recently when
653 parameterizing some variables. This fixes bug #1036.
654 kes Undo recent reservations changes ... will apply them later
655 when they work better.
657 ebl Fixes #1034 which cause mysql to hang the connection after 8h
658 ebl Change default statistics target of filename.name and path.path
659 fields for PostgreSQL. This speeds lookup by indexes. Thanks
661 kes A few more tweaks to new reservation code. Make sure to clear
662 vol released flag when retaking volume. When reading label and
663 label is bad mark volume unused. When recycling, mark volume
664 unused so it can be renamed.
666 kes Fix reserve_volume() so it doesn't release a volume in use
667 (i.e. a volume entry not marked released). This should be
668 the last part needed to fix bug #1018.
670 kes Move Heartbeat documentation from Job to Director resource.
671 This fixes bug #1033.
673 kes Fix existing switch drive SD code to call autochanger to release
674 any old volume. This must be done to keep the autochanger from
675 releasing subsequently newly reserved volumes in doing a close().
676 This should fix bug #1018.
677 kes Fail if attempting to get console input in batch mode. This
678 should help fail RunScript console commands that are incomplete.
679 kes First cut implementing switch_drive() in SD (not actually called).
681 kes Implement first cut running console commands in a RunScript.
683 ebl Fixes bug #1028 where 'Selection Type' option was not usable
685 ebl Fixes bug #897 and bug #1005 where bacula doesn't display runscript
688 Release Version 2.2.7
690 kes Add new free_tls() entry point so that Win32 builds.
691 kes Fix compile warning in src/lib/util.c
692 kes Fix entry point for edit_job_codes() so that Win32 builds.
693 kes Fix seg fault Frank Sweetser reports in regression testing
694 on his systems. The problem was that the original author of
695 bsnprintf.c did not take into account the side effects of
696 using ++x in the argument to a #define.
697 kes Make SD protocol backward compatible with version 2.2.x.
699 ebl Fixes bug #1015 where bacula failed to restore acl to a socket
700 because Bacula no longer restores sockets.
701 ebl Always use ignorecase fileset option on win32 FD.
703 kes Apply patch from Michael Stapelberg <michael@stapelberg.de>
704 that implements double quoting include names in conf files,
705 and also allows piping input by having the first character
706 be a vertical bar (|).
707 kes Apply patch from Bastian Friedrich <bastian.friedrich@collax.com>
708 that implement %f in RunScripts to pass the FileSet name.
709 kes Skip leading | when lex input comes from a pipe as suggested
710 by Michael Stapelberg <michael@stapelberg.de>.
712 kes Apply patch for bsmtp Win32 daylight savings time fix supplied by
713 Nerijus Baliunas <nerijus@users.sourceforge.net>
715 kes Implement Plugin Directory and plugin events.
717 kes Implement a security enhancement: TLS authentication but no
718 encryption. Enabled by setting 'TLS Authentication = yes'.
719 Note when this is on, TLS encryption is turned OFF!
721 kes This patch corrects a problem where the maximum concurrent storage
722 jobs counter gets out of sync during restore jobs causing jobs to
723 'wait on max Storage jobs'. This patch fixes bug #1009.
725 kes This patch fixes bcopy so that it produces correct Volumes.
727 kes This patch eliminates spurious output to the console during a VerifyVolume
728 job that contains encrypted data. It fixes bug #1024.
730 kes This patch prevents the 'status dir' command from trying to use a scratch
731 volume and possibly moving it from one pool to another. This patch fixes
734 kes Add new include to postgresql.c suggested by Marc Cousins so
735 that it compiles correctly with pgre version 8.3.
737 kes Fix --archivedir addition to configure. Replace it with
738 --with-archivedir in configure.in This fixes the regression
740 kes This patch fixes bug #1012 where the job is canceled because
741 of Max Run Time exceeded when the job has not yet started.
743 ebl Apply Richard Mortimer patch that fixes #1016 when there are more than
744 one 'part' to write. Instead of each part being stored on disk,
745 written to DVD, then deleted from disk, all parts are written to disk,
746 and only the last is written and deleted from disk.
747 kes This patch fixes the status command to include the formating string for
748 JS_AttrInsterting. It fixes bug #1021.
749 kes This patch should fix the Mac OS X build problem on the latest
750 Darwin, where sys/types.h was not included correctly (apparently
751 due to a change in the Mac headers). The solution was to explicitly
752 ensure that it is defined for the ./configure.
753 This patch also has a rebuild of configure that includes the Debian
754 qt4 patch to check for qmake-qt4. This patch fixes bug #1020.
755 kes This patch should ensure that queued messages to the console are
756 displayed as soon as possible. It should fix bug 1007, but has been
757 reported not to work.
759 kes This patch fixes the infinite loop when trying to increase the
760 maximum number of volumes in a Pool during the add command.
761 This patch fixes bug #1008.
763 Release Version 2.2.6
765 db Remove extra data on estimate command in joblist for bat.
767 kes Cleanup of code in SD that sets the LastWritten date. This doesn't
768 really change anything, but is the beginning of doing it *right*.
769 To do it completely right the LastWritten date must be passed to
770 the SD, but it is not yet done.
771 kes Minor tweaks to some bat restore SQL.
772 kes This patch fixes bug #1003 where putting the message output from
773 a Verify job into the catalog results in a recursive loop. The problem
774 seems to show up only with postgresql (to be verified).
775 kes Correct %x to %p in postgresql debug statement.
777 kes Fix bug #942 where lots of emails where generated when the heartbeat
778 interval was low and Bacula wanted a different tape from the one in
781 ebl Add new SD despooling attributes and Dir inserting attributes
782 job status codes in the catalog (Status table).
784 ebl Use qmake-qt4 instead of qmake when available (debian system).
786 kes Add a security warning to src/cats/make_catalog_backup.in indicating
787 that passing the password via the command line (arg 3) is insecure.
788 This responds to bug #990 (it doesn't fix it).
790 kes Set default debug_level to zero. This corrects bugs #991 and #993.
791 kes Fix a crash in bat when it cannot connect to the Director for example
792 if the Director is not running.
793 kes Remove redundant INDEX (JobId) from File table in the trunk.
795 kes Make explicit exception to GPL in LICENSE to permit linking
796 the Win32 FD with Microsoft VSS code.
797 kes Apply the Solaris package patch from
798 Masopust, Christian <christian.masopust@siemens.com>
799 kes Apply the patch to optionally add a timestamp in the debug output
800 submitted by Mariusz Czulada <manieq@wp.eu>.
802 ebl Use PQerrorMessage instead of PQresultErrorMessage in postgresql
803 backend (sql_strerror). Fixes bug #989
805 kes Apply Michael Short's <mdshort@gmail.com> Win32 regress patch.
806 It applied with no problems.
807 kes Add PATH command to SunOS part of mtx-changer.in so that sed and
809 kes Redirect stderror to stdin on mt status command in mtx-changer.in
810 since the status is returned on stderr on Solaris.
811 kes Activate Close button on tray-monitor window. This fixes
813 kes Check for NULL item in parse_conf.c before calling it. In the
814 case of Device, there is no item and this caused a seg fault when
815 Device appears in the conf file.
816 kes Add a #define __CONFIG_H when including config.h in bacula.h. This
817 avoids pulling in config.h multiple times in some new code.
819 kes Fix spurious warning message printed when creating a volume with
820 a LabelFormat. This fixes bug #976.
822 Release Version 2.2.5
824 kes Add JobId in place of Job name in all the Jmsg() output.
825 kes Correct the APP_DESC for the Win32 storage service (remove an e).
827 kes Make maxvol-test and new more strict maxvol2-test work.
828 kes Print JobId in all Jmsg() job output.
830 kes Add new SD despooling attributes and Dir inserting attributes
831 job status codes. This fixes bug 961.
832 kes Fix Win32 drive display in bat version browser. Fixes bug #962.
834 kes Fix doc issue. This fixes bug #963.
835 kes Fix listing performance problems in bat. Pointed out by
837 kes Remove old debug code.
838 kes Fix bat code that tests for Win32. This should fix bug #968
839 kes Query 5 list wrong Vol after migration. This fixes bug #960
841 ebl Fix #969 where user can't change Replace option in restore menu.
843 kes Save jcr in thread specific data (tsd) for each thread.
844 kes Make Dmsg() print JobId as -%u.
845 kes Make Jmsg, Emsg, and others automatically pickup the jobid
846 for the thread if it exists.
847 kes Remove old reservation debug jid code.
848 kes Remove get_jcr_from_tid() from OpenSSL and tls code.
849 ebl Add an option that permit to specify spool size in job
850 definition. (Applying patches/testing/spoolsize_per_job.patch).
851 You must upgrade SD and DIR at the same time.
852 dvl Add new configuration item --archivedir
853 dvl Adjust regression tests to use tmp not /tmp. This will allow
854 multiple concurrent runs of the regression tests.
856 kes Fix race condition that drops final block written to volume.
857 This happens in rare cases with multiple simultaneous jobs
858 when the Volume fills. This fixes bug #964. May be related
859 to bug #935 and possibly #903.
860 kes Eliminate more strerror() and replace with bstrerror().
861 kes Remove BSD getopt and replace with unrestricted IBM version.
862 kes Fix Win32 build for changed calling sequences.
863 kes More tweaks to the mount volume routines to get everything
864 right. Changed variable name from find to have_vol, which is
865 much easier to understand.
866 kes Enhance btimer debug code.
868 kes Fix FD->SD authorization failure, which was due to spurious
869 wakeups from a pthread_cond_timedwait(). Simply check the
870 predicate before continuing. This fixes bug #953.
871 kes Add const char where needed (more to do). Remove temp debug code.
873 kes Setup SQLite busy handler before doing queries. Fixes bug #967.
874 kes Don't overwrite error message in check_tables_version.
876 kes Unlock batch insert tables with same calls used elsewhere.
877 kes Allow starting 59 jobs a second.
878 kes Make SD session key more random.
879 kes Add retry for SQLite opening db if it fails. Probably helps
881 kes Suppress extra error messages during batch insert failure.
883 kes Add jcr to timer packets so if killed message can be sent to job.
884 kes Add JobId to all Dmsg() output.
885 kes Put some FD auth code on dbglvl rather than fixed.
886 kes Return insert attributes error message in db msg buffer to avoid
887 false error messages. Helps fix bug #966.
888 kes Separate batch init error messages. Probably helps fix bug #966.
889 kes Make SD code that contructs attribute insert check string lengths
891 kes If Dir gets an error during inserting attributes, cancel SD.
892 This reduces unnecessary error messages.
894 kes Correct search boolean for getting Volume info
895 ebl Cleanup batch insert code. Probably fixes bug #965.
896 kes Back out one small change to the reservation system (reserving a volume).
897 kes Rework how a Volume is mounted. It is now much more intelligent and
898 will always attempt to use any mounted volume if possible and reduces
899 calls to the Director asking about volumes.
901 kes Turn off some code when batch insert not enabled.
902 kes Edit FD name in connect error messages.
903 kes Rework the reservation system to take into account that the Director
904 might give us a Volume that is different from the current one being
905 used, and to ensure that we don't exceed Maximum Volume Jobs.
906 This fixes (mostly) bug #947 ' Maximum Volume Jobs = 1 produces
907 fatal error with multiple jobs running'
908 kes Add more debug code in reservation system.
909 kes Implement maxvol-test to check bug #947.
911 kes Add code to handle tray monitor separated from Win32 FD.
912 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
914 kes Add missed return in fixing verify bug -- trunk only.
915 ebl Fix a command parser issue causing a director segfault.
916 kes Fix ANSI tape labeling. Fix restoring ANSI labeled Volumes.
918 kes Increase the max block size to 4MB fixes bug #957.
919 kes ERABT if user sets min block size > max block size. Fixes bug #956.
920 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
921 is not properly mounted (recognized) during a poll.
922 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
923 Job that has differences reports Verify OK.
924 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
926 ebl Add an option to operate on all pools with update vol parameters.
927 This complete the project 20. Patch from Nigel Stepp.
928 ebl Add history support to bconsole when using readline.
929 Using Ctrl-D to exit doesn't update .bconsole_history
930 kes Modify new volume algorithm to use max MediaId for generating next
931 volume number rather than the count of Volumes. This should essentially
932 eliminate the failure rate if some volumes were deleted. Bug #921.
933 kes Begin implemention of Optimize Job Scheduling.
934 kes Implement restore callback that Dirk and I agreed on for bat
935 restore. This fixes bug #928. Restore of backup of zero files fails.
936 kes Fix SQL Catalog logging which broke with new db_escape_string
939 Release Version 2.2.4
941 kes Fix bacula_cats.def for new db_escape_string().
942 kes Increase size of name string when FD making connection to SD.
943 May fix bug #953. FD->SD connection failure.
945 kes Add code to help Dan debug 2drive-incremental-2disk test.
946 kes Add code to try to fix bug #908.
947 kes Add waits to multiple exit detection code to try to force pid
948 file to always be deleted.
949 kes Restore good dev.tar.gz to rescue set appropriate binary property.
951 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
952 trying to switch drives by checking for blocking before unblocking.
954 kes Cancel storage daemon in all cases where FD reports error. This
955 should fix virtually all cases of bug #920.
956 kes Fix db_escape_string() for MySQL which did not compile.
958 kes Fix error message that was clobbered when Dir tells SD it does not
959 have write permission on Volume. This should fix a minor point
960 in bug #942, but not the main problem.
961 kes Add code to cancel job in SD if FD connection fails. This should
963 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
964 dvl Pass jcr and db into db_escape_string() to enable better escaping
966 kes Fix migration code to get correct Volume name with multiple volumes
967 by skipping |. Fixes bug #936.
968 kes Implement patch supplied by Landon to fix bug #944 where using
969 TLS with bconsole uses 99+% of the CPU.
970 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
972 kes Move patches into patches directory.
974 ebl Fix bug #946 about 'bacula-dir -t' which doesn't works
977 ebl Using 'm' in bconsole will show messages like before,
978 and not memory usage.
979 kes Fix bug #935, and probably also bug #903 where files were not
980 restored. MediaId was not properly set in JobMedia record after
983 kes Suppress chown and chmod error messages if the FD is not running
986 kes Apply Martin Simmons' patch that should turn off the new API usage
987 when batch insert is turned off allowing building on older
989 kes Add ./configure search in qwt-qt4 for qwt package
991 kes Bacula is now free of 3rd party GPL copyrighted code!
993 kes Add guid_to_name.c/h which replace idcache.
994 kes Remove enh_fnmatch.c. Make code that references it use fnmatch.c
996 ebl Detect if new PosgreSQL batch insert API is present.
997 kes Correct incorrect mempool call causing Director crash. Occurs on
998 systems without va_copy().
999 sb Update spec files for 2.2.1 release
1001 kes Fix memory pool call in ua_output.c. bug #934.
1002 kes Replace fnmatch.c and fnmatch.h by modified BSD versions.
1003 Add test program to fnmatch.c
1005 kes Integrate patch to README.vc8 from
1006 Hederer Jean-Sébastien <hedererjs@asperience.fr, had to manually
1007 edit it to get it into Unix patch format.
1008 kes Implement mkpath.c to replace old FSF makepath.c
1010 kes Implement savecwd.h and savecwd.c. Remove FSF versions.
1012 Release Version 2.2.1
1014 kes Update POTFILES.in
1015 kes Cleanup a few underquoted AC_DEFUNs in configure
1016 kes Apply patch from Martin Simmons that adds a test for va_copy to
1019 kes Fix bug #921 by increasing the number of tries to create a new volume
1021 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
1022 can be called multiple times. Implement a version for machines
1023 without va_copy() that gets a big buffer.
1025 kes Integrate more portable zone offset code into bsmtp.c
1026 Submitted by Attila Fülöp.
1028 kes Fix bad SD->FD return status reported by
1029 (James Harper) <james.harper@bendigoit.com.au>
1030 ebl Fix a bug in read_close_session which return random status
1031 thanks to James Harper
1033 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
1034 and directory names during restore of single file/directories.
1035 kes Add sanity checks to .sql command when string is empty. Hopefully
1036 that will resolve Dirks Director crash.
1038 kes Apply patch submitted by Martin Simmons that corrects a seg fault
1039 in the bsmtp chat subroutine when debug is >= 10.
1041 kes Fix Director crash when running bat SQL queries.
1042 kes Add David's notes on Item 8: Copy pools.
1044 kes Rework projects file to be current and ready for a vote.
1045 kes Enhance lex scanner error message.
1047 kes Tweak LICENSE file to mention BSD code.
1048 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
1049 if specified on the ./configure.
1050 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
1051 This class is intended to allow us to open a second bsock to the
1052 Director while in the restore subdialog.
1054 kes Fix configure to create bat Makefile before creating dependencies.
1055 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
1056 kes Add a tooltip to the tray monitor.
1057 dvl Set the Director's PID file before dropping privs. This fixes
1060 kes Update AUTHORs file
1061 kes Increase the default max concurrent jobs to 20 in FD and SD to
1062 correspond with the default .conf files.
1063 kes Rewrite the Win32 service routines. This eliminates the 3 copies
1064 some different, of the same file created by RN when porting the
1066 kes Rearrange some of the Win32 directories and the placement of the files
1068 kes Set DEVELOPER flag in version.h
1070 ========================================================================
1071 Release Version 2.2.0
1073 kes Apply a second doc patch from Marc.
1074 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
1075 improves the tips section that discusses how to setup multiple
1078 kes Update bat README file.
1079 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
1080 corrects a typo in the Recycle status check in db_find_next_volume().
1081 This will probably fix a number of annoying problems with multiple
1083 kes Modify most of dird/msgchan.c to use bsock class calls rather than
1084 bnet calls -- no functionality change.
1086 kes Modify the Verify output to specify if files are missing on
1087 the Volume(s) or disk. Fixes confusion in bug #916.
1088 kes When more than one Volume is read in a migration job, the last
1089 Volume bytes reported are from the last read volume rather than
1090 the last written volume. Fixed. This fixes bug #910.
1091 kes Fix display of Recycle flag after update volume=foo recycle=yes.
1092 It previously printed New Recyle flag is: no. This fixes bug
1095 kes Correct seg fault when switching tape drives during restore.
1096 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
1097 be used until after 2.2.0 release.
1099 kes Remove fnmatch() in SD that permitted wild card specifications.
1100 This fixes bug #914.
1102 kes Fix %g in filename returned by SQL for browse tree reported by
1104 kes Fix configure so that it puts config.out in the cwd rather than
1106 kes Attempt to fix the locking problem reported by Eric in bug #906.
1107 kes Make berrno class to leave errno unchanged after constructor call.
1108 kes Make bnet_server use the heap rather than the stack to allocate
1109 its socket fd pointers to avoid a crash at termination. Problem
1110 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
1112 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
1113 and putting it in depkgs-qt along with Qt4.3.
1115 kes Rework code in acquire.c that switches drives for reading when
1116 the Media Type does not match. This should fix bug #906
1118 ebl Fix a director segfault during job setup #907
1119 kes Correct seg fault in postgresql when first operation returns no
1120 rows. Fixes Dirks File browser problem seg fault with bat.
1122 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
1123 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
1126 kes Implement PopUp YES/NO dialog for bat.
1128 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
1130 kes Correct RunScript to terminate job in FD on failure.
1131 kes Change abort_on_error and AbortJobOnError to fail_on_error
1132 and FailJobOnError in RunScripts.
1133 kes Minor tweaks of code formating in RunScripts, principally to
1134 avoid depassing 80 columns.
1136 kes Eliminate one #ifdef Win32 in bsmtp
1137 kes Implement grow tool to grow a file for testing very large databases.
1138 kes Add big-vol-test to test Bacula seeking with > 5GB.
1141 kes Modify find_next_volume() to return all values in Media record.
1142 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
1146 kes Update Release notes
1148 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
1149 Warning, in previous beta version, all media get from scratch keep their
1152 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
1153 This should fix bug #842. Made a note to look at removing the temp
1154 files at the end of the install.
1155 kes Add ability to mount and unmount a file device providing it is
1156 marked as being removable and has the appropriate mount and unmount
1157 commands defined in the Device resource. This fixes bug #830.
1158 kes When applying a storage override, release all previous storage
1159 definitions rather than just prepending the new storage.
1160 This should prevent a good deal of confusion.
1162 kes Implement ./configure search for qwt libraries.
1164 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
1165 Win32 FD. This should fix bug #893.
1166 kes Remove an unnecessary beep in Win32 init code.
1167 kes Update copyright dates in Win32 executable about boxes.
1168 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
1169 code with a BSD getopt.c and getopt.h.
1170 kes Remove sched.h from the Win32 compat directory -- not used.
1171 kes Remove the Exit menu item from the Win32 tray monitor. If you really
1172 need to shut it down, do it through the services panel or the command
1174 kes Remove some inappropriate Bacula FSFE copyrights.
1175 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
1176 kes Fix regress config non-portable test as pointed out by
1177 Florian Heigl <florian.heigl@gmail.com>
1178 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
1179 as pointed out by Florian Heigl <florian.heigl@gmail.com>
1181 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
1182 Reported by Frank Sweetser.
1186 kes Fix client-only build.
1187 kes Integrate client-only fixes for bsys (initgroups) and conio from
1188 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
1189 kes Make arguments to get_scratch_volume() in same order as other
1191 kes Rework the prune_volumes() subroutine so that after purging and
1192 no volume found in desired pool, it will check for a scratch
1193 volume. This prevents recycling the whole scratch pool.
1194 kes Add code to status storage to print boffset_t (largefile support).
1196 kes Move qwt (Graphics libarary for Qt4) to depkgs.
1197 kes You now need a --with-qwt=<dir> to be able to build bat.
1198 kes Update src/win32/cats/bacula_cats.def to include the new
1199 db_get_query_dbids() call on Win32.
1201 kes Correct a problem when selecting a scratch volume and moving
1202 it to another pool that lost some columns.
1203 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
1204 kes Enhance Autochanger error messages to include Volume and device name.
1205 kes Rework prune_volumes() code to take account of InChanger flag,
1206 and to handle recycling volumes going to the Scratch pool and
1207 current pool because the RecyclePool directive.
1208 kes Implement a better and more efficient db_get_query_dbids() to
1209 handle creating and passing back a list of DBIds.
1213 kes Start work on new more efficient DBId subroutine. First use
1214 will be for recycling volume to Scratch inchanger.
1215 kes Increase number of JobIds in pruning from 1000 to 10000.
1216 This to be replaced by above routine.
1217 kes Begin implementation of building Qt4 on Win32.
1218 kes Correct typo in fix I added for bad TLS shutdown.
1219 kes Pull 2.0.3 patches into patches directory.
1220 kes Update Release notes. Include qt-console in line count.
1221 kes Update Projects file.
1223 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
1224 bug in migration code where a job that spanned two volumes
1227 kes Implement new BST_DESPOOLING blocked state. Change from locking
1228 during despooling in SD to blocking. This means that other threads
1229 can work with the device structure, in particular the reservations
1230 system while despooling.
1232 kes Fix return in reservation message queue that missed clearing
1233 the jcr lock (implemented 26Jun07 below).
1234 kes Rename a number of dev methods to make locking function names
1236 kes Document locking in lock.c. Move lock structures to new file
1239 kes Move reservations message lock to lock jcr only this
1241 kes Move main SD locking code into lock.c (new file).
1242 kes Update Win32 build to include lock.c
1246 kes Dirk committed the qwt library code for drawing graphs in bat.
1247 kes Tweak install of qwt so that it is integrated with ./configure.
1249 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
1250 out by Eric (my typo).
1251 ebl Fix configure.in to get batch mode enable
1252 kes Return correct string from authenticate.cpp in bat when connecting
1254 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
1255 spurious line drops when using TLS.
1256 kes Do not file reparse points when restoring a file that already
1259 kes Implement Windows reparse points -- similar to directories, but
1260 we do not descend into it. This is a first cut. They seem to
1261 be backed up, but restore is not yet tested.
1262 kes Remove restore_blocking in tls code when shutting a socket to leave
1263 it in blocking mode. Hopefully this will fix the encryption bug
1264 reported by Frank Sweetser.
1265 kes When opening a file for backup, tell the OS that we are going to
1266 read it sequentially -- optimization.
1267 kes Change variable names in authenticate_director() to not conflict
1268 with member names in bat. Caused great confusion with compiler,
1271 kes Queue openssl error messages in case of comm problem.
1272 kes Do shutdown() call if socket terminated.
1273 kes Remove some duplicated code in tls.c
1274 kes Move more of the bsock member variables into private and access
1276 kes Add Frank Sweetser's tls-test to the regression suite.
1278 kes Add Swedish sv.po file
1280 kes Don't print clock skew message in FD if less than 3 seconds diff.
1281 kes Add a bit of VSS info to status client.
1282 kes Implement a first cut of Vista VSS, using Win2003 code.
1284 Release: 2.1.20 beta
1286 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
1287 loaded tape but uses first drive).
1288 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
1289 This was indeed a Win32 issue.
1291 kes Simplify search of autochanger for in-use Volume.
1292 kes Fix exit condition of check for in-use volume. kes Remove
1293 inappropriate my_postgresql_free_result() in db_close()
1295 kes Fix bad return in FD when encryption signature not found.
1296 Probably caused a crash.
1297 kes Inhibit missing encryption signature error messages for
1298 file types where no signature computed.
1299 kes Correct inverted check on autochanger in reservation system.
1300 kes Tweak debug code in autochanger reservation.
1302 kes Add some additional locking in the cats directory in subroutines
1303 that modify packet variables called from batch insert.
1304 kes Rework how dcrs are allocated. new_dcr() can now be called
1305 with an existing pointer, and it will simply clean it up.
1306 This allows the reservation system to test various different
1307 devices, and will permit easy device changes.
1308 kes A bunch of changes all over to handle new new_dcr() calling
1310 kes Work more on the Volume management in the SD. Remember Volumes
1311 for tape drives and for autochangers (even virtual disk changers).
1312 kes When looking at the Volume list to reserve a drive, handle
1313 autochanger names correctly by interating through the changer
1314 devices. Also call the Director to see if a Volume is suitable
1315 for the current job.
1316 kes Fix some bugs in bscan. Make sure all media records are written.
1317 Make sure that valid JobMedia records are written for disk files.
1318 Previously they were completely wrong.
1319 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
1320 that the URLs don't change and so that the developers will all
1321 work off the same copy. Rebuild from scrach.
1322 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
1324 Release: 2.1.18 beta
1326 kes Fix seg fault in FD from incorrect digest size.
1327 kes Fix argument to non-OpenSSL crypto.c subroutine.
1329 Release: 2.1.16 beta
1331 kes Remove a few malloc()s from the encryption code.
1332 kes Use the class calls to bsock in filed/backup.c and restore.c in
1333 place of the old bnet_xxx code.
1334 kes Implement code that does an on the fly calculation of the
1335 signing digest during restore of encrypted files. It makes
1336 a best guess at the algorithm, and if it is not correct, will
1337 then revert to the old code which reads the file after it is
1339 kes Implement at least one missing crypto stream in stream_to_ascii()
1340 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
1341 #877 where a reload with bad syntax causes Dir to exit.
1343 Cut: 2.1.14 beta (not released)
1345 kes Do not free a volume on a tape drive until another volume is
1346 mounted and read, or the autochanger unloads the volume.
1347 This should help the SD re-use volumes that are already mounted,
1348 and should fix bug #886.
1349 kes Apply patch from user brettedgar that allows gnome2-console include
1350 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
1351 kes Apply patch from Lucien Weller that fixes day of week calculation
1352 because of DST flag problem. Fixes bug #887.
1354 kes Move find_next_appendable_volume() to after acquiring a valid device
1355 in reserve.c. This fixes bug #864 -- confirmed by reporter.
1357 kes Unable to reproduce bug 872. However added additional testing for
1359 kes Bug #874 resolved by documenting SQLite limitations.
1360 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
1361 kes Bug #881 resolved by removing typo in mtx-changer script.
1362 kes Made Frank Sweetser's wiki the official Bacula wiki with his
1363 approval. Added a link to the wiki on the web page, and implemented
1364 a backup from http://paramount.ind.wpi.edu
1366 kes Fix update allfrompool to pass pool name.
1368 kes Convert to pure GPL v2 license.
1369 kes Fix sscanf problems reported by Peter Buschman that caused
1370 a bus error on Solaris.
1371 kes Rework (simplify) the select prompt in bat.
1372 kes Move get_jobid_from_tid() into lib and create a
1374 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
1375 should definitely fix the problem of lost error messages in the
1377 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
1378 kes Eliminate tcpd.h from the project. Enclose the #include from the
1379 library with extern C ...
1380 kes Add print of signal name when a signal is trapped.
1382 Release: 2.1.12 beta
1384 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
1386 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
1387 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
1388 makes SQLit3 run 30 times faster, though a bit less safe.
1389 kes Implement --with-batch-insert in configure and detection of thread
1390 safe libraries. It is on by default, but turned off if no thread
1391 safe library (e.g. SQLite 2) is available.
1393 kes Fix Bacula PostgreSQL buffer overruns.
1394 kes Do better checking for NULL results returned from PostgreSQL;
1395 implement retry for failed queries; clear results buffer after
1396 failed query. Hopefully this will correct the PostgreSQL failures.
1398 kes Implement algorithm to handle only one appendable volume with
1399 Prefer Mounted Volumes = no.
1400 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
1401 returned from a query.
1402 kes Make volume lock recursive.
1403 kes Implement an additional volume reservation algorithm that
1404 starts by considering all reserved volumes then uses the
1405 old brute force algorithm of searching the resources to
1406 find a suitable device.
1407 kes Add new reservations debug code and refine the old code.
1408 kes Update the win32/dll/bacula.defs file.
1410 kes Tweak reservations algorithm to permit a few more cases, i.e.
1411 volume reserved, but on different drive, ...
1412 kes Enhance SD status to include Pool and Media Type for drive in a
1413 more readable format (a bit longer).
1414 kes Fix PostgreSQL double free.
1416 kes Minor refactoring of restore decryption code.
1417 kes Add code to smartall.c to detect double free of a buffer.
1419 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
1420 so that bsmtp will create a correct email address (mailbox only).
1421 kes Modify 'memory' command so that the buffers are listed as 'In use'
1422 to avoid confusion with Orphaned buffers.
1423 kes I reworked the OpenSSL include/lib flags to be handled in
1424 the standard Bacula way, which should fix bug #863 concerning
1425 non-standard OpenSSL libraries.
1427 kes Implement Help Browser window for bat.
1428 kes Fix reload bug that reset StorageId to zero.
1430 kes Fix TLS #ifdefing when TLS turned off.
1431 kes Ensure that when labelling a tape with Slot=0 that InChanger
1433 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
1435 kes Add StartTime to final uar_sel_jobid_temp query so that we can
1436 add DISTINCT (required by PostgreSQL).
1437 kes Implement BSOCK authenticate_director() method. Eventually will
1438 authenicate all daemons.
1439 kes Move several more functions into the BSOCK class.
1441 kes Add code to tell the OS that we no longer need a cached
1442 file that we were reading. In findlib/bfile.c. Also,
1443 only cache files that we are reading. Thanks to
1444 Tobias Oetiker <tobi@oetiker.ch> for the idea.
1445 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
1446 kes Implement script to automatically generate cats and dll .def
1447 files for Win32 dll.
1448 kes Update README.mingw32 to include new .def file generation.
1449 kes Correct typo in UTF-8 error message as reported by:
1450 jhernandez <julianhernandez@gmail.com>
1451 kes Add additional sm_check() code on debug level 1.
1452 kes Set default debug level to 1.
1453 kes Trap SIGABRT in attempt to get traceback.
1455 kes Reduce bat connect timeout from 30 to 15 seconds.
1456 kes More restructuring and implementing BSOCK class in place of
1458 kes Remove a few unnecessary malloc() tests in crypto code.
1459 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
1460 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
1461 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
1463 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
1465 kes Fix Verify InitCatalog. The attributes were not pointing to the
1466 correct saved location.
1467 kes Implement message callback so that GUI is sure to get all
1468 daemon messages. Currently displayed in a dialog in bat.
1469 kes Ignore SIGUSR2 (Bacula timer) in bat.
1470 kes Apply regress patch from bug #859 to allow regress to work
1471 with Solaris compiler.
1473 kes Begin adding TLS support to bat.
1474 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
1475 clean up lex.c and make it more readable.
1477 kes Move more bnet functions into the BSOCK class.
1478 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
1479 kes Complete change of berrno strerror() method to bstrerror()
1481 Release: 2.1.10 beta
1483 kes Cleanup incorrect email addresses in bsmtp.
1484 kes Make bat display initial messages rather than discard them.
1486 kes First cut of adding .mod to the run command.
1487 kes Implement auto display of messages in bat.
1488 kes Enhanced preferences to allow all Bacula output to be
1491 kes Try to make bsmtp date routines more generic.
1492 kes Fixed bug #856 autochanger documentation.
1493 kes Rework bsmtp date editing for Win32. This fixes bug #854.
1494 kes Add new cats entry point so Win32 builds.
1496 kes Attempt to fix bsmtp date editing on OSes without %z editing.
1498 kes Do better checking for the MySQL 64 bit libraries looking for both
1499 .a and .so libraries.
1500 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
1501 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
1502 kes Require the thread safe version of MySQL during configure. Thanks
1503 to Andre Noll for pointing this out.
1504 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
1505 continuing in migration code.
1506 kes Apply implementation of tray-monitor font derived from gnome-console
1507 submitted by Andreas Piesk <a.piesk@gmx.net>
1509 kes Eliminate important memory loss in SQLite
1510 kes Fixed the batch insert MySQL thread specific data that was not
1511 being freed. See cats/mysql.c:db_thread_cleanup().
1512 kes Fix restore before command.
1513 kes Convert old hdr.name to name() in a few places.
1514 kes Implement update jobid command.
1515 kes Return all time_t dates in db_get_job_record()
1516 kes Stop watchdog in SD earlier.
1517 kes Put Pool just after Storage in please mount message.
1518 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
1521 kes Update the po files.
1522 kes Fix Verify InitCatalog by making it cache attributes.
1524 kes Change name bacula-bat to bat for man 1 page to correspond to
1526 kes Check for client and store NULL pointers in status command. This
1528 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
1529 kes Fix sign extended editing of %p.
1530 kes Clean out a little old #ifdefing in cats/mysql.c
1532 kes If time diff between DIR and FD is more than 600 seconds convert
1533 INFO message to WARNING.
1534 kes Implement heap size display in status for all daemons.
1535 kes Attempt to fix MySQL db open memory loss (not successfull).
1536 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
1537 kes Eliminate memory loss in MySQL (possibly other SQLs) during
1538 Query. This looks like a MySQL but but by doing extra releases,
1539 the memory goes away. This should fix bug #847.
1541 kes When backup fails, cancel SD before waiting for sd termination.
1542 kes If SD is waiting for FD to connect during cancel, wake up the
1544 kes Fix fsf code so that errno is correctly reported.
1545 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
1547 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
1548 so that Bacula doesn't later stumble into a seg fault.
1549 kes Use the term Restore Client in the restore Job report.
1550 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
1551 the original job's FileSetId.
1552 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
1553 spooling in migration jobs. Not yet tested.
1554 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
1555 reading conf file from a pipe. However, do it with open_bpipe()
1556 rather than popen. Not yet tested.
1558 kes Fix an ugly bug where the VolCatBytes were getting updated
1560 kes Implement bconsole memory command that prints current memory
1561 usage, plus smartalloc dump.
1562 kes Clarify some error messages in backup, admin, and migrate.
1563 kes Shrink label dialog to smaller size.
1564 kes Invert Cancel OK buttons on restore to be OK Cancel.
1565 kes More strerror() to bstrerror() conversions.
1567 kes Start implementing bstrerror() in place of strerror().
1568 kes Stripping path -- seems to work.
1570 kes Prevent door and port files from being restored (mostly
1572 kes Free an unreleased buffer in compat code.
1573 kes Change console Job name from *Console* to -Console- to eliminate
1574 Win32 filename problems. Put Win32 path separator when creating
1575 Console file. This fixes bug #846.
1576 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
1578 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
1580 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
1581 to force Win32 error message.
1583 kes First cut strip path. The data should be passed to the FD,
1584 but nothing is done with it yet.
1585 kes Enhance the digest and signature routines in the crypto
1586 library to accept a JCR and to use it to print error messages
1587 so that they will go in the Job report rather than the daemon's
1589 kes Simplify some of the verify signature code.
1590 kes Simplify a few of the alternative returns in the signature
1593 ebl Use only POSIX regex instead of GNU regex in breg.c for
1594 File relocation. It fix broken freebsd compilation.
1595 kes Convert all other Dir files to use new ua class message
1597 kes Tentative fix for missing digest signature in bug 807.
1598 kes Correct handle problem in new win32_ftruncate routine.
1599 kes Convert ua_purge.c and ua_update.c to use new ua class
1600 message routines for bat.
1602 kes Correct incorrect installation of LICENSE in Win32 installer.
1603 kes Display LICENSE at the beginning of the Win32 install.
1604 kes Attempt to correct the need for the png files to be installed
1606 kes Reapply my bat.conf install script in qt-console. I think I
1607 editted bat.pro instead of bat.pro.in and it was lost.
1608 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
1609 the /var/lock/subsys for subsysdir. Also corrects typos in the
1612 kes First cut update job.
1613 kes Correct configure to include qmake of src/qt-console directory.
1615 kes Make restore job yes/mod/no print in one command so GUI works.
1616 kes First cut implementing backup and restore client.
1617 kes Correct editing in Verify output that caused a seg fault.
1619 kes Insure that bat.conf is not overwritten during installation.
1620 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
1621 while I was implementing migration in March 2006 !
1623 ebl Cleanup file relocation, using char *RegexWhere instead of
1624 char *where + bool where_use_regexp
1625 kes Update some manpages and add bat manpage.
1626 kes Make a first cut at converting bacula.spec.in for bwx-console
1628 kes Apply patch from John Goerzen to add hostname as fourth argument
1629 to make_catalog_backup script.
1630 kes Fix typos I introduced into bsmtp.c
1631 kes Make pm_strxxx() routines handle input of NULL pointer. This
1632 is to protect from NULL pointers returned from SQL databases.
1633 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
1634 kes Add more debug to FIFO code -- fix fifo regression test.
1636 kes Implement posix_fadvise in FD, and for reading spool files in SD.
1637 kes Add thread timer to bnet_connect() to break from OS if wait time
1640 kes Update Win32 build to include new files, new symbols, and
1642 kes Implement socket level heartbeat (tcp_keepidle)
1643 ebl Commit File relocation patch
1644 kes Make bat have 'make install' target.
1645 kes Warn during install if old gnome-console binary found.
1646 kes Warn during install if old wx-console binary found.
1647 kes Add -8 option to bsmtp command line to add content type utf-8.
1648 Fixes bug #809. (Character coding problem in bsmtp).
1649 kes If < is found in target (from, to, cc) then do not enclose the
1650 target in < > in bsmtp. Fixes bug #772 (malformed address).
1651 kes When printing certain items in dbcheck, stop after 300000.
1652 Fixes bug #822. (dbcheck loops).
1653 kes Incorrect status in Dir after waiting for mount with poll set.
1656 kes Extend idea of Prefer Mounted Volumes to mean a volume about
1658 kes Print waiting to reserve a device every 5 mins.
1660 kes Don't call close_part in label.c if tape and relabel.
1661 kes Don't free volume if busy in close() -- should help with
1663 ebl Fix #824 RunScript bug (After script could be execute twice)
1664 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
1665 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
1666 Add a regression script to test RunScript
1668 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
1671 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
1672 deprecated. No additional bugs will be fixed, and they will be dropped
1673 in a future release (probably 2.4.0).
1674 kes Change name of wx-console to bwx-console to make it more Bacula
1676 kes Change the name of gnome-console to bgnome-console to make it
1679 kes Some time in March, a Feature Request with patch from Jorj Bauer
1680 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
1682 The ability for the director to validate a Client (FD) CN against
1683 an arbitrary set of patterns rather than the hostname, with
1684 A new 'TLS Allowed CN' set of directives which are implemented
1685 in the Client resource. Then pattern matching is used in place
1686 of hostname matching against the Certificate's CN. As an example, we
1687 have certificates which (a) use a local CA, and (b) have a CN of the
1689 kes Add new/changed entry points to Win32 build
1690 kes Create unaccepted-projects for projects that are not accepted.
1691 kes Simplify locking in the reservations system.
1692 kes Add more debug code in reservations.
1693 kes Make sure error condition on reserving a volume is handled correctly.
1694 kes Correct handling of volume_in_use.
1695 kes Correct handling of initializing a device.
1696 kes Move handling of broadcasting releasing a device into release_device().
1697 kes Correct attaching dcr to dev so that it is only done if device
1698 is properly initiated.
1700 kes Locking debug level tweaks in SD.
1701 kes Tweak new Volume code.
1703 kes Add exec external-command [wait-seconds] to bconsole. This
1704 executes the external-command. Note! normally external-command
1705 should be enclosed in double quotes.
1706 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
1707 it should normally be off in a production system.
1709 kes Implement die command for SD so that we can force it to dump.
1710 kes Implement SD lock debug code.
1711 kes Implement new algorithm for keeping Volume list in SD. It
1712 is now owned by the device.
1714 kes Implement new code for freeing in use volumes that should
1715 resolve if not all, some of the problems of multiple drive
1716 tape conflicts described in bug 801.
1718 kes Fix gui/bacula-web/images files in svn.
1719 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
1721 ebl Fix a bug in batch mode (in string escape)
1722 kes Correct migration prune SQL typo that crept in in a
1723 recent 2.1.x change.
1725 kes Move bnet_despool() into class in bsock.c
1726 kes Modify job report to include director name and Build OS.
1727 kes Move drop root privilege and check_catalog() before fork.
1728 kes Add update database scripts (version 9 to 10) to updatedb directory.
1730 ebl Check size and age of each file after its backup to see if
1731 it has changed during backup, if 'checkfilechanges' is set.
1732 The FD will do an extra check (stat(2)) after
1733 each file backup. mtime, ctime and size are compared with
1734 'before backup' information. If time or size mismatch, an
1735 error message will be generated. You must upgrade FD to use it.
1737 kes Make database name and user configurable
1738 --with-db-name=xxx --with-db-user=xxx
1739 kes Add back database type to message.c for debugging.
1741 kes Implement dir_sql() which issues an SQL query.
1742 kes Modify bat medialist to use dir_sql() and do some minor C++
1743 formatting as well as eliminating a number of pointers, simplifing
1746 kes Fix some of the mtx-changer grep commands for tape label readers.
1747 kes Convert a number of bsendmsg into the appropriate send/warning/error
1748 message class calls.
1749 kes Suppress the using database message in the .sql command.
1750 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
1752 kes Add context menu for floating a window.
1753 kes Some minor cleanup and name changes in qt-console
1754 kes Add doing mt setblk 0 in Win32 mtx-changer.
1755 kes Apply Martin's bug fix to move definition of ENODATA for
1757 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
1758 sqlite2 and sqlite3.
1760 kes More pruning cleanup.
1761 kes Turn on wait_for_drive by default in mtx-changer.
1762 kes Turn on Batch insert code by default as it now passes regression.
1763 kes Add ./configure --enable-bat to enable building of Bat.
1764 No install yet though.
1766 kes Implement a new .sql command for bat.
1767 kes Implement code to turn off pruning in obtaining the next volume.
1768 Pruning is turned off for the status dir command, but turned on
1769 for SD requests and for the list nextvolume command.
1771 kes Correct Qmsg() that was not updated correctly when committing a
1772 previous change (probably the recent TLS patch).
1774 kes Write new subroutine is_volume_purged() that explicitly checks
1775 if the Volume is purged, and if so marks it as such. This should
1776 resolve problems reported about needing to mount twice to recycle
1778 kes Rewrite pruning algorithm to do more work in the SQL engine, and
1779 to pass a list of JobIds to be deleted to SQL. Also, minimize the
1780 amount of duplicated code.
1781 kes Do volume pruning only for the Media Type desired (reduces pruning time
1782 if multiple Media Types are in the same pool).
1783 kes Implement more detailed info in the Job report for the Bacula version
1785 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
1787 ebl Add bbatch tool to bench database and insert mode.
1788 Fix sql quote stuff in batch mode
1789 Fix sql stuff for mysql
1791 kes Correct problems with am/pm scheduling. Fixes bug #808.
1792 kes Implement new prunning code that prunes up to 1000 jobs at
1793 the same time. The same technique can be applied to a number
1794 of other prune/purge subroutines.
1795 kes Add an insanity check when starting a new tape job to ensure
1796 that the tape position has not been changed. If so fail the
1798 kes Fix Win32 build for dlls to add the folllowing:
1799 src/lib/bsock.c -- new file with new entry points
1800 src/lib/dlist.c -- new entry points
1801 src/cats/sql_create.c -- new entry point
1802 src/cats/sql_cmds.c -- new DATA item exported
1804 ebl batch mode cleanup bscan-test is ok now.
1805 kes Implement SD code to check length of disk volume before appending.
1807 kes Correct return status on db_batch... routines.
1808 kes Add call to db_write_batch_file_records() to migration code.
1809 ebl Fix AfterJob timing
1810 kes Move the checking of the database in initializion of the Director
1811 to after we drop privileges. This avoids the need for both root
1812 and bacula access to the DB.
1813 kes Correct a misplaced variable definition in src/filed/backup.c
1814 kes Correct how the new batch insert db_create_attributes_record()
1815 uses the arguments. Caused a seg fault in bscan.
1816 kes Implement lock() and unlock() methods in DEVICE class.
1817 Implement block() and set_block(xx) methods in DEVICE class.
1818 kes Modify bnet_connect() so that it uses time() to check for the
1819 wait time expiring (on some OSes, some system calls may not
1820 return immediately).
1821 kes Modify Verify to obtain the previous JobId when it is actually
1822 running rather than at schedule time (as it was in 1.38.x).
1823 kes Fix src/job.c to handle MaxWaitTime correctly. This should
1825 kes When checking pid in pid file, continue running if the pid is
1826 the same as ours. This occurs on IRIX after a system crash.
1829 kes Extend new GUI API.
1830 kes Make the ua structure a class, and implement send_msg(),
1831 error_msg(), warning_msg(), and info_msg().
1833 kes Apply fix from for building wx-console on the Mac from
1835 kes Implement new select mechanism for GUI programs.
1836 kes Reorganize initialization of stackedWidgets in bat.
1838 kes Add updated nagios plugin supplied by Christian Masopust.
1840 kes More bat implementation.
1841 kes File migrate bug with Pool Occupancy using mediaid instead
1842 of jobids. Fixes bug #795.
1843 kes Fix orphaned buffers in filed backup and verify due to
1844 crypto buffers not freed during errors. Fixes bug #789.
1845 kes Extend new GUI api code to tree commands.
1846 kes Ensure that tree and dot commands check console ACLs.
1847 kes Permit marking directory with trailing slash.
1848 kes Allow 20 console connections (instead of only 10).
1850 kes Add smartctl call to bacula-sd.conf as an example of getting
1853 kes Modify jobq.c to let simultaneous restore jobs run. This may
1854 cause them to fail if they cannot get a drive.
1855 kes Add Client Connect Wait to Storage daemon to permit users to
1856 modify the time the SD waits for a FD connection.
1858 kes Correct virtual changer check which was backwards. This caused
1859 volumes to be unloaded into slots already occupied.
1861 kes Apply Command ACL filter to JobId list in restore command.
1862 kes Correct typeo in var.c patch.
1864 kes Don't let Bacula prune File or Job records for the current Job.
1865 kes Fix variable substitution pad + inc bug reported (with patch)
1868 kes Correct SQLite log table index as reported by Luca Berra.
1870 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
1872 kes Begin implementing new comm signals for API.
1873 kes Fix a few places in lib/message.c where the open fd may
1875 kes Continue implementing lib/bsock.c (real class). Make jcr,
1876 who, host, and port private. There are new methods to access
1877 them for non-class use. This required touching a number of files.
1879 kes Add LANG=C to autoconf/randpass so it works with languages other
1880 than English. Fixes bug #788.
1882 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
1884 You will not be able to generate Include/Exclude list any more.
1885 It will be fixed soon.
1886 If you want to use this, you can apply
1887 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
1889 kes Restore of sockets created false error messages because Bacula
1890 no longer restores sockets, but the code was still trying to
1891 set the attributes on a non-existent file. Reported by a user.
1892 ebl finish RecyclePool feature
1893 Media will takes Pool.RecyclePool
1894 when moving from Scratch to a Pool or when user will do
1895 update volume=xxx frompool
1896 To use it, add RecyclePool = aPool to your Pool resource
1899 RecyclePool = Scratch
1903 kes Expand new BSOCK class adding signal() and new BNET signals.
1904 kes Begin enhancing the dot commands adding a new API function
1905 that returns more information and will make it easier
1906 to interface to the Director from a program.
1908 kes Make DEVICE fd private. Its new name is m_fd, and can be
1909 obtained with dev->fd() outside the class. This is the
1910 first of many DEVICE members to be made private.
1911 kes Implement Michael Renner's idea on having a virtual disk
1912 changer. I made some minor modifications (e.g. I did not
1913 implement the Virtual Changer directive, but simply set
1914 the Changer Command to an empty string.
1916 kes Implement a BSOCK send() method that writes the whole record
1917 in a single write() request rather than in two.
1918 ebl add update volume=xxx recyclepool=yyyy
1919 volume takes recyclepool from pool when using update volume=xxx from pool
1921 kes Fix encryption deblocking bug, which caused some restored files
1922 to be truncated. This fixes bug #763.
1923 kes Add FD event sequence order prepared by Eric -- for RunScripts.
1924 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
1926 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
1927 ebl Use btime_t instead of uint64_t in media patch.
1929 kes Optimize the use of the database a bit in the Status dir command.
1930 Only open it when needed, ensure that if any previous database
1931 was opened, it is closed.
1933 kes Correct VolCatBytes bug from media patch.
1934 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
1935 in the case of orphaned records.
1936 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
1937 and File records in 300K chunks to be more efficient. This
1938 idea came from Juan Luis Frances (if I remember right).
1939 kes Apply Eric's scratch patch that moves a purged Volume to
1940 the RecyclePool. Question: how is RecyclePool set? what
1941 happens to the ScratchPool?
1942 kes Apply Eric's media patch that collects read/write media
1943 times as well as byte counts. This patch requires a
1944 simultaneous upgrade of the DIR and SD. Note, there
1945 should be some way to turn off timing. I'm not sure
1946 times are in Bacula units.
1947 kes Apply Eric's batch-insert patch.
1949 kes Update projects list.
1951 kes Implement Include/Exclude file lists in FD as dlists using
1952 the new dlistString class. This permits efficiently having
1953 large include/exclude lists and completes project Item 25.
1954 kes Fix dird/ua_cmds.c so that a cancel command checks if the
1955 console is authorized to cancel the job. This fixes bug
1957 kes Modify SD so that the VolCatJobs medium record is updated
1958 at the beginning of a Job rather than the end. This
1959 fixes bug #775 where exceeding MaxVolJobs caused jobs
1961 kes Added a mutex around getting and setting Volume information
1962 so that multiple simultaneous jobs will single thread.
1964 Switch to using Subversion
1965 kes Remove src/pygtk-console/ from configure
1967 kes Delete src/lib/btree.c from win32 build, then add rblist.c
1968 plus the entrypoints.
1969 kes Apply patch supplied that corrects debug print
1970 in canceling jobs for max run time. Supplied as
1971 part of bug #621, which was previously fixed.
1973 kes Test on job_canceled() and sd_msg_thread_done inside
1974 loop starting the message thread to avoid a race condition.
1976 kes Remove rl_catch_signal from console.c as it conflicted
1977 with the header definition. Fixes bug #765.
1978 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
1980 kes Clarify some stored/acquire messages to indicate if the
1981 problem is with read or append.
1983 kes Fix memory leak with storage ids in cats/sql_get.c
1984 kes Terminate watchdog earlier to avoid reference to released
1985 memory -- reported by Jason Austin.
1986 kes Move closing the database from jobq.c to the director daemon
1987 termination routine. This fixes memory leaks for shadow jobs
1988 (i.e. migration jobs).
1989 kes Free up the unique jobid chain items in migrate.c. This fixes
1990 a memory leak problem.
1991 kes Convert some ugly looking for statements to use foreach_alist
1992 in findlib/find.c. This will facilitate converting the structures
1993 to use dlist (for large include/exclude lists).
1994 kes Fix a bug in the btree.c and btree.h routines, then rename them
1995 rblist and add them to be built in src/lib. Include some new
1996 methods written by Rudolf Cejka that make the code more readable
1997 (hides some of the ugly casting).
1998 kes Add set_next() and set_prev() methods which make the code much more
1999 readable. Also add a new dlistString class that facilitates storing
2000 strings in dlists. To be used in the large include/exclude lists.
2001 kes Make some trivial modifications to lib/tree.h that use rblist
2002 rather than dlist for storing the tree links. This was suggested
2003 by Rudolf Cejka. The result of this is that the restore tree now
2004 uses red-black binary trees rather than simple linked lists. This
2005 should give rather dramatic speed improvements for directories
2006 contining large numbers of directories/files (more than 10000).
2008 kes Fix maxruntime bug #621.
2010 ebl Implement the include JobID in spool file name project.
2011 kes Reorder projects file in order determined by Jan 2007 vote.
2012 kes Implement item #12 on project list -- quick release of FD by
2014 kes Fix open of SQLite3 db where user does not have write permission
2015 so that DIR does not crash. Fixes bug #761.
2017 kes Add back missing @ in Win32 Makefile.
2018 kes Change 'Device not configured to autolabel' from INFO
2020 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
2021 which should restart an indefinite # of times.
2022 kes Fix configure --help to print --with-mysql[=DIR]. Same for
2023 other DIR specifications.
2025 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
2026 Fix path quoting in SQLite scripts.
2027 Fix problems with SHGetFolderPath.
2029 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
2031 kes Fix Job restart on error bug that promotes an Inc to a Full
2032 backup. This should fix bug #755.
2033 kes Add qt-console and first cut of code.
2037 kes Fix Bacula->Documentation link on Win32 to point to index.html
2038 instead of bacula.html. Fixed bug #750.
2039 kes Return JobId in db_get_job_record() when JobId==0. This should
2041 kes Do not release source pointers when restarting a failed job.
2043 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
2044 This *should* fix bug #747.
2045 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
2048 kes Modify USTORE constructor to set an empty store_source string,
2049 and don't copy the store_source string in a cancel. Hopefully
2050 this will fix Arno's seg fault, bug #744.
2051 kes Add back code to disable conio in configure. Fixes bug #743.
2052 kes Correct the Options scanner in the FD to correctly handle
2053 SHA1 option, which was eating the next option. Reported by
2055 kes Add code to indicate when the SD is spooling, spool wait, and
2056 despooling as requested by Alan Brown.
2058 Version 2.0.0 released: 4 January 2007
projects / bacula / bacula / blob