1 Technical notes on version 2.5
9 Multiple command/console per runscript
10 console command in runscript
13 State file updated on job term
16 Duplicate Job directives
17 - Allow Duplicate Jobs
18 - Allow Higher Duplicates
19 - Cancel Queued Duplicates
20 - Cancel Running Duplicates
21 Ensure they work with RerunFailedLevels
25 Improved status commands for Bat
26 Spooling/despooling status
27 Implement ftruncate for NFS devices
28 Add long term statistics job table
34 kes Virtual Backup tweaks -- it is close to working.
36 kes Ensure that SD tried to mount a volume not in an autochanger
37 at least once before asking for operator intervention.
38 kes Make SD aware of Virtual Backup jobs.
39 kes Add VirtualFull for bat.
40 kes Changes to get read storage correct for Virtual Backup.
42 kes Remove old code from label.c
43 kes Split display_display_info() out of write_bsr_file()
44 kes do_vbackup_init() working -- i.e. bootstrap file built.
45 kes Change Bacula trademark owner from John Walker to Kern Sibbald
46 kes First non-working cut of vbackup
47 kes Correct FD heartbeat code to use volatile variable accessed by
49 kes Zero thread id with memset if on Win32 in case it is a struct.
50 kes If cannot create JobMedia record, continue to try to write eof
51 and clean up in block.c
53 kes Add code to interface OpenSSL to new Win32 pthreads code which
54 used a structure for thread_t.
56 ebl tweak bat for win32 compilation
58 ebl Remove tokyo cabinet from the source
59 ebl Update configure/autoconf to support berkeley DB
60 ebl Add a sort to db_get_file_list() to improve bsr construction time.
62 kes Add a mtx-changer.conf file that is not overwritten during
63 an upgrade. It fully configures the mtx-changer script.
64 kes Clear in-use bit on vol when unused while swapping.
66 kes Remove sleep at end of ./bacula
67 kes Clear hash packet for hardlinked files correctly. This corrects
68 a long standing bug where hardlinked files selected individually
69 would occasionally not be restored.
71 kes Apply Eric's patch to ensure that autoprune does not return
72 a Volume not in the autochanger unless requested to do so.
73 kes Correct bat restore display of multiple drives. This fixes
75 kes Do find_a_volume() each time an unload is done. This
76 fixes the failure of maxvol2-test.
78 kes Add some SD debug code.
79 kes Do find_a_volume() each time an unload is done.
80 kes Apply Joao's DBI patch that adds easier configuration of DBI drivers,
81 and adds --with-db-port to ./configure.
82 kes Use Qmsg() in job.c watchdog callback.
84 kes Release main control rwlock if ABORTing.
85 kes Make watchdog connect timeout queue messages rather than sending
86 directly to avoid lock conflicts with the real thread.
87 kes Add const char in dbd.c to avoid compiler warnings.
88 kes Fix python compiler string warning. Note, IMO the GNU C++
89 compiler guys have made a *very* bad change to their compiler.
90 They now force all strings to be 'const' unless you explicitly
91 cast them, which is extremely ugly and ruins nice code as well
92 as creates a lot of useless work.
94 kes Fix mtx-changer to detect both versions of Ubuntu (Debian)
95 mt. This fixes bug #1116.
96 kes Add const in python files to reduce compiler warnings.
97 This may have to be backed out because of later compiler
99 kes Fix failure of 2drive-concurrent-test. Always read label;
100 clear_unload() only after drive is defined in acquire_for_read().
102 kes Generally clean up the manual tape loading code. The main
103 conceptual change is that when a volume is marked to be unloaded,
104 its volume name is retained, and it is only marked as unloaded
105 when either the autoloader says it is unloaded or another tape
106 is read on that drive.
108 kes Add debug code and refactor subroutine in stored/mount.c
109 kes Fix format problem in bscan output reported in bug #1105.
110 ebl Fix get_next_volume_for_append logic with autochanger
111 - use pruned volumes if found
112 - don't reset the inchanger flag after getting a recycled volume
114 Fix recycle_oldest_purged_volume to take InChanger flag in account
116 ebl Add mmap/unmmap implementation for tokyodbm under win32
118 kes Make first step toward eliminating globals from config
119 scanning. Also should be a workaround for FORTIFY_SOURCE
120 GNU C bug -- fixes bug #1042.
122 kes Apply duplicate job tests to restarted jobs.
123 kes Copy more data when restarting a job so that run
124 overrides are kept. This should fix bug #1094.
126 kes More word alignment cleanup.
127 kes Fix bug where SD did not ask operator if the device could not
128 be opened. Reported by Eric.
130 kes Add dbuser to DIR conf file (replaces user).
131 kes Add --with-db-password to ./configure
132 kes Fix regress to handle db_password.
133 ebl Add new "status storage slots" that list autochanger
135 ebl Update vtape driver to compile only under Linux.
136 ebl Fix a bug when restoring with a wrong mediatype.
138 kes Eliminate ints from conf files and structures to avoid
139 word alignment problems
141 kes Fix bug reported by Scott Barninger where the bacula script
142 refers to scripts in the wrong directory. Needed to meet the
143 requirements of recent FHS location changes.
144 ebl Disable vtape for FreeBSD.
146 ebl Modify disk-changer to check if slot contains something before
149 ebl Fix vtape on win32 and debian.
150 ebl Fix autoselect patch (cause segfault).
152 ebl Fix autoselect option broken for a while. Fix #1089. Need some
153 work with StorageId to be able to use a particular drive in a
156 ebl Rename vtape to vtape.
157 ebl Update vtape driver.
159 ebl Modify vtape driver to avoid sparse file.
160 kes Add make clean of qt-source directory during ./configure
161 kes Store last block number written to tape in DEVICE and
162 use it for testing for correct last block on EOT.
164 Release Version 2.4.0:
168 kes Make sure to clear JS_WaitMedia when operator mounts a Volume.
169 This fixes bug #1095.
171 kes Add create_postgresql_database.sql to Win32 installer. Should
172 fix problem reported by Juilio Monteiro.
173 kes Get correct slot when auto unloading a device. This fixes bug
176 kes Fix multiple media restore.
177 kes Make DEVICE Slot private and access it via a method.
178 Allows better control over when it is set and cleared.
179 kes Fix possible seg fault if SQL error.
181 kes Add Martin's fixes to argument scanning for the estimate
182 command. This fixes bug #1093.
183 kes Add debug code to SD.
184 kes Fix renaming a Volume, which used the wrong Volume name.
186 kes If operator has rewind tape, print warning, release tape and
187 try once more. If tape is positioned somewhere, something went
188 wrong, so mark the tape in error and try once more. Previously
189 this error was fatal, now it produces an error message.
190 kes Ensure correct volume name displayed during restore
191 kes Ensure that Volume is mounted for restore.
193 kes Fix a few more Coverity reported problems.
195 kes Apply Allan Black's status dir job count patch.
196 ebl Add information about IMPORT/EXPORT slots in mtx-script.
197 kes Enhance a couple of SD debug messages.
198 kes Tweak unload flag setting and ensure it is set during swap.
200 ebl Fix #1091 about bad output in estimate command.
202 kes Modify autochanger locking to attempt to avoid race
204 kes Make sure device not busy before doing label command.
205 kes Display open() errors except when polling. Previously too
206 many were suppressed. This should fix bug #1070.
207 kes Fix Win32 reparse points. Bacula will not recurse into any
208 reparse point directory, including mount points, unless the
209 directory is explicitly mentioned at the top level (same as
210 with Unix). A file that is linked to another file will be
211 backed up -- much as Unix does for hardlinked files.
212 This fixes bug #1041.
214 kes Remove double quotes from ChangeLog and ReleaseNotes
215 kes Remove StorageId test when pruning and recycling (Eric's changes).
216 kes Remove old form of locking when getting volumes -- causes deadlock.
217 kes Change bat dirstat layoutWidget to dirstatlayoutWidget to make
218 the name unique and to eliminate compile time error.
219 kes Add accurate.o to Win32 FD Makefile
221 kes Fix cats dll build on Win32 after db_update_job_end_record
222 calling sequence change.
223 ebl Switch to tokyo dbm instead of htable in accurate code
224 ebl Include tokyo dbm to bacula source tree
226 kes Fix buffer overruns detected by Coverity.
228 kes Tweak joblog display.
230 kes Implement --without-qwt
231 kes Fix layout of restore tree dialog
232 kes Add configure bat QWT libraries, so that bat can be built
233 with or without the QWT libaries.
235 ebl Add dummy tape driver for regression tests.
236 kes Make sure we unload the right slot when swapping.
238 kes Add debug times, reduce size of two-pool-changer test
240 ebl Tweak autoconf scripts for vtape
242 kes Improve SD reserve debug code.
243 kes Testing an improvement to free up volumes no longer in use.
245 kes Rework SD acquire for read to handle autochanger Volume
247 kes Implement regression that explicitly tests swapping a Volume
248 from one drive to another.
249 kes Enhance disk-changer to detect most error conditions.
250 kes Fix SD code so that it properly swaps a Volume between drives.
251 This fixes bug #1083.
253 kes Apply libdbi patch from Joao Freitas for regress and for
254 Bacula trunk. Regress now works with libdbi. Nice.
255 kes Apply .nobackup patch from bug #1077 submitted by
257 kes Apply Bastian Friedrich's patch that adds %p to edit the pool
258 name into jobs cloned via the run directive.
260 kes Prevent a Volume that is being swapped from being freed from
261 the volume list. This will most likely fix, at least partially,
263 kes Fix strippath so that it does not get a buffer overrun and crash FD.
264 This fixes bug #1078.
265 kes Remove 50 millisec wait in SD that broke debugger.
266 ebl Add MaxRunSchedTime option that specifies the maximum allowed time
267 that a job may run, counted from when the job was scheduled.
268 ebl Fix MaxWaitTime option that specifies the maximum allowed time that
269 a job may block waiting for a resource, counted from when the job starts
270 ebl Rename (add) Max(Incr|Diff|Full)WaitTime to Max(Incr|Diff|Full)RunTime
271 kes Apply patch from bug #1076 by Tullio Andreatta <t.andreatta@troppoavanti.it>
272 that implements multiple commands per line in the console when using
273 readline. Modify the default to use a semicolon as the command separator.
275 ebl Fix SQL query in migration code.
276 ebl Make accurate mode with hash disk pass regression tests
278 ebl Implement first cut of accurate backup with hash disk.
280 kes Force unload of volume when wrong volume mounted in SD.
282 kes Fix bat seg fault at termination.
283 kes Add Bacula generated version to bat about box.
286 kes Experiment with allowing multiple read jobs.
287 kes Move final volume swapping code to DCR method and
288 call it from acquire_for_read().
289 kes When wrong volume is mounted during read, unload_autochanger.
291 kes Integrate the libdbi changes from Joao Henrique Freitas
293 kes Stop searching for Volumes in SD askdir if DIR returns the
294 same volume name twice in a row.
295 kes Close bat console windows first to eliminate error message
298 kes Tweak the swap Volume from one drive to another code so that
299 it now seems to work.
300 kes Resolve several problems with recycling that broke the new
301 code (these problems are in 2.2.9 as well).
302 kes Remove the volume lock when calling the sysop code.
303 kes Don't mark a reserved volume with no writers as unused otherwise
306 kes Rework class structures for VOLRES, DCR, and DEVICE to make
307 the method names a bit more logical, and for more logically
308 handling the responsibilities.
310 kes Remove redundant code in terminating the scheduler that just
311 causes a seg fault in many cases.
312 kes Cleanup releasing a volume and make it a DCR method.
313 kes Improve algorithm for detecting pre-reserved volume and
316 kes Tweak volume swapping code so it works.
317 kes Correct name overloading in mount.c
318 kes Replace released flag in VOLRES with reserved and add access
319 methods for the VOLRES class.
320 kes Prevent volume from being released while being swapped.
321 kes Apply Bastian Friedrich's edit codes patch for the bpipe-fd
323 kes Apply Bastial Friedrich's edit pool=%p patch for run clone
325 kes Refactor parts of stored/mount.c
327 ebl Add sanity checks for VolWriteTime and VolReadTime
328 ebl Take care of bad clock changes while computing VolWriteTime
329 and VolReadTime. This should fix or limit #1066
330 kes Correct error string numbers in dird/catreq.c
331 kes Restructure reserving, acquiring, and mounting volumes. Calls to
332 autochanger are deferred for mount.c -- simplifes the code.
334 kes Do not prune any running job. It just fails the job.
335 kes Lock the volumes when changing dev->reserved_device and marking
336 the volume unused otherwise the device can get reserved by
337 another job before the volume is released, thus blocking it.
339 kes Correctly detect Ubuntu systems, and add ubuntu platform directory.
340 kes Fix bug #1063, reuse of freed ptr in list nextvol.
341 kes Release regex compile buffer in filed/job.c
342 kes Add proper type of const char in sql_create.c
343 kes Turn off debug in daemon termination routines
344 kes Move free_volume_list() before devices are freed in stored.c
345 kes Fix reference to uninitalized stack variables in bregex.c.
346 This should correct bug #1067.
348 kes Fix possible seg fault in SD when freeing a volume entry.
350 kes Implement unload_dev() before swap device.
351 ebl Add statistics prunning with option and menu
352 kes Separate unload_dev() from unload_other_device() in autochanger.c
354 kes Apply patch from bug #1069 that corrects spurious error messages
355 when ACLs enabled on SGI but no ACL exists.
356 ebl Fix small segfault in bacula-sd when debug level is 500
357 kes Modify run_program() and run_program_full_output() to use
358 call by reference for the results string. This corrects a long
359 standing problem where the address of the string may be changed
360 in the subroutine but not in the calling program.
362 kes Re-enable code to remember last volume mounted on a non-tape
364 kes Add patch supplied in bug #1068 that fixes a SD crash when using
365 a Virtual autochanger.
366 kes Generate correct JobMedia records during spooling/despooling when
367 running concurrent jobs. Thanks to Tom Ivar Helbekkmo
368 <tih@hamartun.priv.no> for excellent analysis and testing.
370 kes Tweak hash algorithm for htable using Martin Simmons idea
371 for doing a circular shift.
372 kes Remember what volume is in VTLs (previously turned off for
374 kes Analysis of JobMedia records by Tom Ivar Helbekkmo <tih@hamartun.priv.no>
375 pointed out some problems in creating JobMedia records during
376 spooling with concurrent jobs. Fix the problem by updating the
377 start file position before despooling and generate a jobmedia
378 record at the end of despooling.
380 kes Fix handling of JobMedia records during spooling and when a
381 Volume is changed without actually writing data to the Volume.
383 kes Rework certain SD locking based on gdb tracebacks of deadlocks
384 sent by Eric. This code now uses only the volume_lock() rather
385 than the reservations lock when at EOM and acquiring a new
387 kes Ensure only one exit point in several subroutines.
389 kes Implement bsock code to permit locking. Use the new code in Verify
390 in the FD to prevent the heartbeat thread from disrupting the Verify
391 data sent to the Dir.
392 kes Modify SD locking to eliminate locking the reservations system from
393 outside the system. Use the volume lock when getting media data
394 and reserving a new volume at end of media.
395 kes Add Eric's volume_unused() fix to stored.c so that Volumes found
396 when SD starts are not locked into place.
398 kes Fix error compiling runscript code on 64 bit machines.
399 kes Tweak Win32 mount point code.
400 kes Fix a couple of bugs in the accurate code (bad sscanf, buffer not
401 cleared giving bad file estimate).
402 kes Implement BIG_MALLOC in htable code. Runs 2.5 times faster for
405 kes Keep Schedule run lists in order as suggested by
408 kes Implement autostart scripts for Debian.
409 ebl Implement upgrade catalog scripts.
411 ebl Apply jobstat patch for long term statistics. Have to implement
412 purge stats command and upgrade scripts.
413 kes Fix mtx-changer.in for broken Debian mt program.
415 kes Fix large number of JobMedia records reported by Eric Bollengier.
417 kes Apply doc fix from bug #1062.
418 kes Resolve crash and improper restore wx-console Win32 restore
419 GUI. Fixes bug #1065.
420 kes Update Win32 wxWidgets to latest version.
421 kes Attempt to do correct handling of Win32 mount points. Should
423 kes Fix Win32 FD backup/restore memory leak due to improper termination
424 of BackupRead/Write. This fixes bug# 1038.
426 ebl Reduce memory usage for accurate backup, working only with ctime
427 and mtime. (not all Lstat field)
428 About 40MB for my Linux system (400.000 files)
430 kes Add dcr->reserved_volume flag that allows us to release a volume
431 even if it is not vol->released. This allows maxvol2 to work when
432 Volumes expire and we are already writing to the device (i.e. a
433 volume is pulled out from under us by another job terminating after
434 we reserve the drive).
436 ebl Permit multiple command/console per runscript definition.
437 RunScript { command = /bin/true ; command = /bin/false ... }
438 ebl Add RunsWhen = AfterVSS to runscript. You can execute a command
439 (restart an application) just after the VSS snapshot on windows.
440 kes Don't zap dcr values during release_volume() as they might
441 have the next Volume to be mounted.
442 kes Fix AIX prototype.
444 kes Second cut of drive switching during backup.
447 kes Update Win32 version of wxWidgets to most recent version.
448 kes Tweak Copy job details.
449 kes Rework dir_find_next_appendable_volume to make a bit more effort
450 to find a suitable volume before giving up.
452 kes Make ask_sysop_to_create... to return if waken from wait.
453 This helps get out of blocked conditions.
454 kes Experimental implementation of switch_device in reservations.
455 kes Implement FD version to allow easier protocol changes.
456 kes Add Plugin Options string -- not yet passed to FD.
457 kes Implement PluginOptions ACL.
459 kes Attempt to correct problems with restores with autochangers and
460 use counts going negative
461 kes Rework SD status command and implement API for bat. Implements
462 header, runing waitreservation, devices, volumes, spooling,
463 and terminated status keywords.
464 .status storage=xxx <keyword>
465 kes Clarify TLS error message by adding double quotes around name.
466 kes Simplify SD/FD status code by putting api flag in STATUS_PKT
467 kes Pass jcr to tls routines so debug messages can be handled better.
468 kes Rework jobq resource allocation code, and possibly fix a bug
469 that caused reference counts to get out of sync.
471 kes Rename fd/dir plugin to use Bacula standard underscore.
472 kes Plugin work -- bring dir up to fd level.
473 kes Start implementation of VTL code
474 kes Fix Win32 build after adding new cats subroutine.
476 kes First cut at Duplicate Job implementation.
478 kes Fix bugs in MaxFullInterval and Implement MaxDiffInterval.
479 kes Start PluginOptions string, and refactor a bit of ua_run.c
480 ebl Apply Allan patch that permit to reset recyclepool.
482 kes Test patch -- possible fix or improvement for bug #1053
483 kes Refactor FD and SD status commands to permit new API code in
484 SD, and to fix Win32 build.
485 kes Win32 build is now working.
487 kes Implement 'MaxFullInterval' and start 'MaxDiffInterval' based on
488 some ideas in patch from Scott Bailey.
489 kes Begin implementation of duplicate Job control.
490 kes Fix some of Win32 build after recent additions.
491 kes Apply patch from Frank Kardel that implements 'honor no dump flag',
492 which causes the FD to detect whether or not the OS has the
493 honor no dump bit (*BSD systems), and if so, to skip backing up
494 any file with this bit set. The feature is enabled by setting
495 'honor no dump flag = yes' in the Options section of a FileSet.
497 kes Correct po warning message with datarootdir
498 kes Implement more code in dird.c to put configuration parsing in
499 a class rather than use globals.
500 kes Restructure SD status command for implementation of bat API
503 kes Suppress incorrect 'Will not descend from x into y' messages.
504 kes Eliminate FORTIFY_CODE=2 bug, and make first cut at removing
505 daemon globals used by parser.
506 kes Apply Joao's patch to separate DB_TYPE and DB_PROG in configure.
508 kes Fix free of plugin_list when none exists.
510 ebl Apply accurate project patch.
512 ebl Fix a segfault when using strip_path option. (Use of pm_strcpy
513 on non-mempool object)
514 kes First cut of converting FD .status to work with bat API.
516 .status client=XXX header
517 .status client=XXX running
518 .status client=XXX terminated
519 kes Implement first cut of Copy Job.
520 kes Implement Catalog in Pool resource. It overrides catalog specified
521 in the Client resource.
523 kes Apply patch (with some difficulties) from Joao Henrique Freitas
524 <joaohf@gmail.com>, which adds support for libdbi as a Bacula
526 kes Add patch from Martin Schmid scm@apsag.com that checks to see if
527 ftruncate() actually works. In the case of some (cheap) NAS devices,
528 it does not, and so recycling NAS Volumes does not work. The code
529 simply unlink()s the file, then recreates it. This fixes bug #1011.
531 kes First incomplete cut of big malloc blocks for htable.
532 kes Tweak plugin code.
534 kes Plugin debug code + tweak a couple bat dialog layouts
536 kes Fix creating first JobMedia record during Migration to include
537 proper index. This caused slow restores of migrated jobs.
538 kes Temp fix to plugin name file_index.
539 kes Bacula backed up and restored a MySQL database.
541 kes Implement plugin restore.
542 kes Implement parsing of db_driver to give db_type index.
544 kes First cut of plugin restore code.
545 kes Fix bug #1047, which had a heap overrun when stripping certain paths,
546 and do not strip paths on symbolic links.
547 kes Set catalog backup database and user name from values specified on
548 the ./configure line.
549 ebl Fix #1031 about wrong pool source information in job report.
552 kes Remove a redundant jcr argument to find_files, match_files, and
554 kes Implement '.status dir header|scheduled|running|terminated' that
555 prints the requested status section. With the exception of the
556 header, the other reports have fields separated by tabs (\t).
558 kes Apply patch from Peter Much <pmc@citylink.dinoex.sub.org> that fixes
559 a resource embedded run command to find a since time if no explicit
560 since time was supplied on the command line.
561 kes Apply state-file.patch sent by Allan Black <Allan.Black@btconnect.com>
562 that updates the state file at job termination time in addition to
563 when the daemon terminates.
565 kes First version where a plugin did a backup.
566 bpipe-fd.so created a backup file, wrote a test
567 string to it, and Bacua could restore this fabricated file.
569 kes Implement DB Driver = string for the DBI driver.
570 kes Remove all old bdb_xxx.c code. Add dummy routines to bdb.c
571 kes First cut of code for loading Win32 plugin dlls. Implement
572 dlopen, dlsym, dlclose, and dlerror in src/win32/compat/compat.cpp
573 and implement a dlfcn.h file based on opengroup's definitions of
576 kes First cut plugin directives.
578 kes Apply patch from bug #1049 to prevent stripping the path on a
580 kes Attempt to fix bug #1047 where stripping a path corrupts the
581 heap. Waiting for feedback.
582 kes Correct the Mount message not to suggest labeling a new tape
583 when doing a restore. Submitted by email by John Stoffel.
584 kes Attempt to work around gcc FORTIFY_SOURCE bug that crashes the
585 FD by using casting. Reported in bug #1042.
587 kes A bit of crypto cleanup. More later.
589 Release Version 2.2.8
591 kes Apply patch from Martin to correct bug #1040, bscan sets existing
593 kes Fixed important spelling error in doc -- bug #1045.
595 ebl Fix bextract to be able to extract non-portable Win32 data to
597 kes Move initialization of read/write res lock earlier in the code.
598 This fixes the crash with a null conf file. This fixes bug
600 kes Redefine CURES in lib/parse_conf to be URES and move it all
601 into lib/parse_conf.c -- this responds to bug #1042, but does
602 not fix it. The fix is not to compile with FORTIFY_SOURCE.
603 kes Backport to 2.2.8 fix de-referencing a NULL pointer in the scanner from
604 the trunk SVN. I don't think this was reported as a bug.
606 ebl Fix a bug during tape initialization with MTSETDRVBUFFER.
608 kes Fix Win32 build with new .def files and DLL_IMP_EXP ...
610 kes Add DataDespooling and DataCommitting status (committing is
611 the last despooling).
612 kes Finish implementation of new reservations code noted below.
614 kes Fix bsnprintf for float point numbers. I broke recently when
615 parameterizing some variables. This fixes bug #1036.
616 kes Undo recent reservations changes ... will apply them later
617 when they work better.
619 ebl Fixes #1034 which cause mysql to hang the connection after 8h
620 ebl Change default statistics target of filename.name and path.path
621 fields for PostgreSQL. This speeds lookup by indexes. Thanks
623 kes A few more tweaks to new reservation code. Make sure to clear
624 vol released flag when retaking volume. When reading label and
625 label is bad mark volume unused. When recycling, mark volume
626 unused so it can be renamed.
628 kes Fix reserve_volume() so it doesn't release a volume in use
629 (i.e. a volume entry not marked released). This should be
630 the last part needed to fix bug #1018.
632 kes Move Heartbeat documentation from Job to Director resource.
633 This fixes bug #1033.
635 kes Fix existing switch drive SD code to call autochanger to release
636 any old volume. This must be done to keep the autochanger from
637 releasing subsequently newly reserved volumes in doing a close().
638 This should fix bug #1018.
639 kes Fail if attempting to get console input in batch mode. This
640 should help fail RunScript console commands that are incomplete.
641 kes First cut implementing switch_drive() in SD (not actually called).
643 kes Implement first cut running console commands in a RunScript.
645 ebl Fixes bug #1028 where 'Selection Type' option was not usable
647 ebl Fixes bug #897 and bug #1005 where bacula doesn't display runscript
650 Release Version 2.2.7
652 kes Add new free_tls() entry point so that Win32 builds.
653 kes Fix compile warning in src/lib/util.c
654 kes Fix entry point for edit_job_codes() so that Win32 builds.
655 kes Fix seg fault Frank Sweetser reports in regression testing
656 on his systems. The problem was that the original author of
657 bsnprintf.c did not take into account the side effects of
658 using ++x in the argument to a #define.
659 kes Make SD protocol backward compatible with version 2.2.x.
661 ebl Fixes bug #1015 where bacula failed to restore acl to a socket
662 because Bacula no longer restores sockets.
663 ebl Always use ignorecase fileset option on win32 FD.
665 kes Apply patch from Michael Stapelberg <michael@stapelberg.de>
666 that implements double quoting include names in conf files,
667 and also allows piping input by having the first character
668 be a vertical bar (|).
669 kes Apply patch from Bastian Friedrich <bastian.friedrich@collax.com>
670 that implement %f in RunScripts to pass the FileSet name.
671 kes Skip leading | when lex input comes from a pipe as suggested
672 by Michael Stapelberg <michael@stapelberg.de>.
674 kes Apply patch for bsmtp Win32 daylight savings time fix supplied by
675 Nerijus Baliunas <nerijus@users.sourceforge.net>
677 kes Implement Plugin Directory and plugin events.
679 kes Implement a security enhancement: TLS authentication but no
680 encryption. Enabled by setting 'TLS Authentication = yes'.
681 Note when this is on, TLS encryption is turned OFF!
683 kes This patch corrects a problem where the maximum concurrent storage
684 jobs counter gets out of sync during restore jobs causing jobs to
685 'wait on max Storage jobs'. This patch fixes bug #1009.
687 kes This patch fixes bcopy so that it produces correct Volumes.
689 kes This patch eliminates spurious output to the console during a VerifyVolume
690 job that contains encrypted data. It fixes bug #1024.
692 kes This patch prevents the 'status dir' command from trying to use a scratch
693 volume and possibly moving it from one pool to another. This patch fixes
696 kes Add new include to postgresql.c suggested by Marc Cousins so
697 that it compiles correctly with pgre version 8.3.
699 kes Fix --archivedir addition to configure. Replace it with
700 --with-archivedir in configure.in This fixes the regression
702 kes This patch fixes bug #1012 where the job is canceled because
703 of Max Run Time exceeded when the job has not yet started.
705 ebl Apply Richard Mortimer patch that fixes #1016 when there are more than
706 one 'part' to write. Instead of each part being stored on disk,
707 written to DVD, then deleted from disk, all parts are written to disk,
708 and only the last is written and deleted from disk.
709 kes This patch fixes the status command to include the formating string for
710 JS_AttrInsterting. It fixes bug #1021.
711 kes This patch should fix the Mac OS X build problem on the latest
712 Darwin, where sys/types.h was not included correctly (apparently
713 due to a change in the Mac headers). The solution was to explicitly
714 ensure that it is defined for the ./configure.
715 This patch also has a rebuild of configure that includes the Debian
716 qt4 patch to check for qmake-qt4. This patch fixes bug #1020.
717 kes This patch should ensure that queued messages to the console are
718 displayed as soon as possible. It should fix bug 1007, but has been
719 reported not to work.
721 kes This patch fixes the infinite loop when trying to increase the
722 maximum number of volumes in a Pool during the add command.
723 This patch fixes bug #1008.
725 Release Version 2.2.6
727 db Remove extra data on estimate command in joblist for bat.
729 kes Cleanup of code in SD that sets the LastWritten date. This doesn't
730 really change anything, but is the beginning of doing it *right*.
731 To do it completely right the LastWritten date must be passed to
732 the SD, but it is not yet done.
733 kes Minor tweaks to some bat restore SQL.
734 kes This patch fixes bug #1003 where putting the message output from
735 a Verify job into the catalog results in a recursive loop. The problem
736 seems to show up only with postgresql (to be verified).
737 kes Correct %x to %p in postgresql debug statement.
739 kes Fix bug #942 where lots of emails where generated when the heartbeat
740 interval was low and Bacula wanted a different tape from the one in
743 ebl Add new SD despooling attributes and Dir inserting attributes
744 job status codes in the catalog (Status table).
746 ebl Use qmake-qt4 instead of qmake when available (debian system).
748 kes Add a security warning to src/cats/make_catalog_backup.in indicating
749 that passing the password via the command line (arg 3) is insecure.
750 This responds to bug #990 (it doesn't fix it).
752 kes Set default debug_level to zero. This corrects bugs #991 and #993.
753 kes Fix a crash in bat when it cannot connect to the Director for example
754 if the Director is not running.
755 kes Remove redundant INDEX (JobId) from File table in the trunk.
757 kes Make explicit exception to GPL in LICENSE to permit linking
758 the Win32 FD with Microsoft VSS code.
759 kes Apply the Solaris package patch from
760 Masopust, Christian <christian.masopust@siemens.com>
761 kes Apply the patch to optionally add a timestamp in the debug output
762 submitted by Mariusz Czulada <manieq@wp.eu>.
764 ebl Use PQerrorMessage instead of PQresultErrorMessage in postgresql
765 backend (sql_strerror). Fixes bug #989
767 kes Apply Michael Short's <mdshort@gmail.com> Win32 regress patch.
768 It applied with no problems.
769 kes Add PATH command to SunOS part of mtx-changer.in so that sed and
771 kes Redirect stderror to stdin on mt status command in mtx-changer.in
772 since the status is returned on stderr on Solaris.
773 kes Activate Close button on tray-monitor window. This fixes
775 kes Check for NULL item in parse_conf.c before calling it. In the
776 case of Device, there is no item and this caused a seg fault when
777 Device appears in the conf file.
778 kes Add a #define __CONFIG_H when including config.h in bacula.h. This
779 avoids pulling in config.h multiple times in some new code.
781 kes Fix spurious warning message printed when creating a volume with
782 a LabelFormat. This fixes bug #976.
784 Release Version 2.2.5
786 kes Add JobId in place of Job name in all the Jmsg() output.
787 kes Correct the APP_DESC for the Win32 storage service (remove an e).
789 kes Make maxvol-test and new more strict maxvol2-test work.
790 kes Print JobId in all Jmsg() job output.
792 kes Add new SD despooling attributes and Dir inserting attributes
793 job status codes. This fixes bug 961.
794 kes Fix Win32 drive display in bat version browser. Fixes bug #962.
796 kes Fix doc issue. This fixes bug #963.
797 kes Fix listing performance problems in bat. Pointed out by
799 kes Remove old debug code.
800 kes Fix bat code that tests for Win32. This should fix bug #968
801 kes Query 5 list wrong Vol after migration. This fixes bug #960
803 ebl Fix #969 where user can't change Replace option in restore menu.
805 kes Save jcr in thread specific data (tsd) for each thread.
806 kes Make Dmsg() print JobId as -%u.
807 kes Make Jmsg, Emsg, and others automatically pickup the jobid
808 for the thread if it exists.
809 kes Remove old reservation debug jid code.
810 kes Remove get_jcr_from_tid() from OpenSSL and tls code.
811 ebl Add an option that permit to specify spool size in job
812 definition. (Applying patches/testing/spoolsize_per_job.patch).
813 You must upgrade SD and DIR at the same time.
814 dvl Add new configuration item --archivedir
815 dvl Adjust regression tests to use tmp not /tmp. This will allow
816 multiple concurrent runs of the regression tests.
818 kes Fix race condition that drops final block written to volume.
819 This happens in rare cases with multiple simultaneous jobs
820 when the Volume fills. This fixes bug #964. May be related
821 to bug #935 and possibly #903.
822 kes Eliminate more strerror() and replace with bstrerror().
823 kes Remove BSD getopt and replace with unrestricted IBM version.
824 kes Fix Win32 build for changed calling sequences.
825 kes More tweaks to the mount volume routines to get everything
826 right. Changed variable name from find to have_vol, which is
827 much easier to understand.
828 kes Enhance btimer debug code.
830 kes Fix FD->SD authorization failure, which was due to spurious
831 wakeups from a pthread_cond_timedwait(). Simply check the
832 predicate before continuing. This fixes bug #953.
833 kes Add const char where needed (more to do). Remove temp debug code.
835 kes Setup SQLite busy handler before doing queries. Fixes bug #967.
836 kes Don't overwrite error message in check_tables_version.
838 kes Unlock batch insert tables with same calls used elsewhere.
839 kes Allow starting 59 jobs a second.
840 kes Make SD session key more random.
841 kes Add retry for SQLite opening db if it fails. Probably helps
843 kes Suppress extra error messages during batch insert failure.
845 kes Add jcr to timer packets so if killed message can be sent to job.
846 kes Add JobId to all Dmsg() output.
847 kes Put some FD auth code on dbglvl rather than fixed.
848 kes Return insert attributes error message in db msg buffer to avoid
849 false error messages. Helps fix bug #966.
850 kes Separate batch init error messages. Probably helps fix bug #966.
851 kes Make SD code that contructs attribute insert check string lengths
853 kes If Dir gets an error during inserting attributes, cancel SD.
854 This reduces unnecessary error messages.
856 kes Correct search boolean for getting Volume info
857 ebl Cleanup batch insert code. Probably fixes bug #965.
858 kes Back out one small change to the reservation system (reserving a volume).
859 kes Rework how a Volume is mounted. It is now much more intelligent and
860 will always attempt to use any mounted volume if possible and reduces
861 calls to the Director asking about volumes.
863 kes Turn off some code when batch insert not enabled.
864 kes Edit FD name in connect error messages.
865 kes Rework the reservation system to take into account that the Director
866 might give us a Volume that is different from the current one being
867 used, and to ensure that we don't exceed Maximum Volume Jobs.
868 This fixes (mostly) bug #947 ' Maximum Volume Jobs = 1 produces
869 fatal error with multiple jobs running'
870 kes Add more debug code in reservation system.
871 kes Implement maxvol-test to check bug #947.
873 kes Add code to handle tray monitor separated from Win32 FD.
874 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
876 kes Add missed return in fixing verify bug -- trunk only.
877 ebl Fix a command parser issue causing a director segfault.
878 kes Fix ANSI tape labeling. Fix restoring ANSI labeled Volumes.
880 kes Increase the max block size to 4MB fixes bug #957.
881 kes ERABT if user sets min block size > max block size. Fixes bug #956.
882 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
883 is not properly mounted (recognized) during a poll.
884 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
885 Job that has differences reports Verify OK.
886 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
888 ebl Add an option to operate on all pools with update vol parameters.
889 This complete the project 20. Patch from Nigel Stepp.
890 ebl Add history support to bconsole when using readline.
891 Using Ctrl-D to exit doesn't update .bconsole_history
892 kes Modify new volume algorithm to use max MediaId for generating next
893 volume number rather than the count of Volumes. This should essentially
894 eliminate the failure rate if some volumes were deleted. Bug #921.
895 kes Begin implemention of Optimize Job Scheduling.
896 kes Implement restore callback that Dirk and I agreed on for bat
897 restore. This fixes bug #928. Restore of backup of zero files fails.
898 kes Fix SQL Catalog logging which broke with new db_escape_string
901 Release Version 2.2.4
903 kes Fix bacula_cats.def for new db_escape_string().
904 kes Increase size of name string when FD making connection to SD.
905 May fix bug #953. FD->SD connection failure.
907 kes Add code to help Dan debug 2drive-incremental-2disk test.
908 kes Add code to try to fix bug #908.
909 kes Add waits to multiple exit detection code to try to force pid
910 file to always be deleted.
911 kes Restore good dev.tar.gz to rescue set appropriate binary property.
913 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
914 trying to switch drives by checking for blocking before unblocking.
916 kes Cancel storage daemon in all cases where FD reports error. This
917 should fix virtually all cases of bug #920.
918 kes Fix db_escape_string() for MySQL which did not compile.
920 kes Fix error message that was clobbered when Dir tells SD it does not
921 have write permission on Volume. This should fix a minor point
922 in bug #942, but not the main problem.
923 kes Add code to cancel job in SD if FD connection fails. This should
925 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
926 dvl Pass jcr and db into db_escape_string() to enable better escaping
928 kes Fix migration code to get correct Volume name with multiple volumes
929 by skipping |. Fixes bug #936.
930 kes Implement patch supplied by Landon to fix bug #944 where using
931 TLS with bconsole uses 99+% of the CPU.
932 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
934 kes Move patches into patches directory.
936 ebl Fix bug #946 about 'bacula-dir -t' which doesn't works
939 ebl Using 'm' in bconsole will show messages like before,
940 and not memory usage.
941 kes Fix bug #935, and probably also bug #903 where files were not
942 restored. MediaId was not properly set in JobMedia record after
945 kes Suppress chown and chmod error messages if the FD is not running
948 kes Apply Martin Simmons' patch that should turn off the new API usage
949 when batch insert is turned off allowing building on older
951 kes Add ./configure search in qwt-qt4 for qwt package
953 kes Bacula is now free of 3rd party GPL copyrighted code!
955 kes Add guid_to_name.c/h which replace idcache.
956 kes Remove enh_fnmatch.c. Make code that references it use fnmatch.c
958 ebl Detect if new PosgreSQL batch insert API is present.
959 kes Correct incorrect mempool call causing Director crash. Occurs on
960 systems without va_copy().
961 sb Update spec files for 2.2.1 release
963 kes Fix memory pool call in ua_output.c. bug #934.
964 kes Replace fnmatch.c and fnmatch.h by modified BSD versions.
965 Add test program to fnmatch.c
967 kes Integrate patch to README.vc8 from
968 Hederer Jean-Sébastien <hedererjs@asperience.fr, had to manually
969 edit it to get it into Unix patch format.
970 kes Implement mkpath.c to replace old FSF makepath.c
972 kes Implement savecwd.h and savecwd.c. Remove FSF versions.
974 Release Version 2.2.1
976 kes Update POTFILES.in
977 kes Cleanup a few underquoted AC_DEFUNs in configure
978 kes Apply patch from Martin Simmons that adds a test for va_copy to
981 kes Fix bug #921 by increasing the number of tries to create a new volume
983 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
984 can be called multiple times. Implement a version for machines
985 without va_copy() that gets a big buffer.
987 kes Integrate more portable zone offset code into bsmtp.c
988 Submitted by Attila Fülöp.
990 kes Fix bad SD->FD return status reported by
991 (James Harper) <james.harper@bendigoit.com.au>
992 ebl Fix a bug in read_close_session which return random status
993 thanks to James Harper
995 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
996 and directory names during restore of single file/directories.
997 kes Add sanity checks to .sql command when string is empty. Hopefully
998 that will resolve Dirks Director crash.
1000 kes Apply patch submitted by Martin Simmons that corrects a seg fault
1001 in the bsmtp chat subroutine when debug is >= 10.
1003 kes Fix Director crash when running bat SQL queries.
1004 kes Add David's notes on Item 8: Copy pools.
1006 kes Rework projects file to be current and ready for a vote.
1007 kes Enhance lex scanner error message.
1009 kes Tweak LICENSE file to mention BSD code.
1010 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
1011 if specified on the ./configure.
1012 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
1013 This class is intended to allow us to open a second bsock to the
1014 Director while in the restore subdialog.
1016 kes Fix configure to create bat Makefile before creating dependencies.
1017 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
1018 kes Add a tooltip to the tray monitor.
1019 dvl Set the Director's PID file before dropping privs. This fixes
1022 kes Update AUTHORs file
1023 kes Increase the default max concurrent jobs to 20 in FD and SD to
1024 correspond with the default .conf files.
1025 kes Rewrite the Win32 service routines. This eliminates the 3 copies
1026 some different, of the same file created by RN when porting the
1028 kes Rearrange some of the Win32 directories and the placement of the files
1030 kes Set DEVELOPER flag in version.h
1032 ========================================================================
1033 Release Version 2.2.0
1035 kes Apply a second doc patch from Marc.
1036 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
1037 improves the tips section that discusses how to setup multiple
1040 kes Update bat README file.
1041 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
1042 corrects a typo in the Recycle status check in db_find_next_volume().
1043 This will probably fix a number of annoying problems with multiple
1045 kes Modify most of dird/msgchan.c to use bsock class calls rather than
1046 bnet calls -- no functionality change.
1048 kes Modify the Verify output to specify if files are missing on
1049 the Volume(s) or disk. Fixes confusion in bug #916.
1050 kes When more than one Volume is read in a migration job, the last
1051 Volume bytes reported are from the last read volume rather than
1052 the last written volume. Fixed. This fixes bug #910.
1053 kes Fix display of Recycle flag after update volume=foo recycle=yes.
1054 It previously printed New Recyle flag is: no. This fixes bug
1057 kes Correct seg fault when switching tape drives during restore.
1058 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
1059 be used until after 2.2.0 release.
1061 kes Remove fnmatch() in SD that permitted wild card specifications.
1062 This fixes bug #914.
1064 kes Fix %g in filename returned by SQL for browse tree reported by
1066 kes Fix configure so that it puts config.out in the cwd rather than
1068 kes Attempt to fix the locking problem reported by Eric in bug #906.
1069 kes Make berrno class to leave errno unchanged after constructor call.
1070 kes Make bnet_server use the heap rather than the stack to allocate
1071 its socket fd pointers to avoid a crash at termination. Problem
1072 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
1074 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
1075 and putting it in depkgs-qt along with Qt4.3.
1077 kes Rework code in acquire.c that switches drives for reading when
1078 the Media Type does not match. This should fix bug #906
1080 ebl Fix a director segfault during job setup #907
1081 kes Correct seg fault in postgresql when first operation returns no
1082 rows. Fixes Dirks File browser problem seg fault with bat.
1084 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
1085 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
1088 kes Implement PopUp YES/NO dialog for bat.
1090 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
1092 kes Correct RunScript to terminate job in FD on failure.
1093 kes Change abort_on_error and AbortJobOnError to fail_on_error
1094 and FailJobOnError in RunScripts.
1095 kes Minor tweaks of code formating in RunScripts, principally to
1096 avoid depassing 80 columns.
1098 kes Eliminate one #ifdef Win32 in bsmtp
1099 kes Implement grow tool to grow a file for testing very large databases.
1100 kes Add big-vol-test to test Bacula seeking with > 5GB.
1103 kes Modify find_next_volume() to return all values in Media record.
1104 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
1108 kes Update Release notes
1110 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
1111 Warning, in previous beta version, all media get from scratch keep their
1114 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
1115 This should fix bug #842. Made a note to look at removing the temp
1116 files at the end of the install.
1117 kes Add ability to mount and unmount a file device providing it is
1118 marked as being removable and has the appropriate mount and unmount
1119 commands defined in the Device resource. This fixes bug #830.
1120 kes When applying a storage override, release all previous storage
1121 definitions rather than just prepending the new storage.
1122 This should prevent a good deal of confusion.
1124 kes Implement ./configure search for qwt libraries.
1126 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
1127 Win32 FD. This should fix bug #893.
1128 kes Remove an unnecessary beep in Win32 init code.
1129 kes Update copyright dates in Win32 executable about boxes.
1130 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
1131 code with a BSD getopt.c and getopt.h.
1132 kes Remove sched.h from the Win32 compat directory -- not used.
1133 kes Remove the Exit menu item from the Win32 tray monitor. If you really
1134 need to shut it down, do it through the services panel or the command
1136 kes Remove some inappropriate Bacula FSFE copyrights.
1137 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
1138 kes Fix regress config non-portable test as pointed out by
1139 Florian Heigl <florian.heigl@gmail.com>
1140 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
1141 as pointed out by Florian Heigl <florian.heigl@gmail.com>
1143 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
1144 Reported by Frank Sweetser.
1148 kes Fix client-only build.
1149 kes Integrate client-only fixes for bsys (initgroups) and conio from
1150 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
1151 kes Make arguments to get_scratch_volume() in same order as other
1153 kes Rework the prune_volumes() subroutine so that after purging and
1154 no volume found in desired pool, it will check for a scratch
1155 volume. This prevents recycling the whole scratch pool.
1156 kes Add code to status storage to print boffset_t (largefile support).
1158 kes Move qwt (Graphics libarary for Qt4) to depkgs.
1159 kes You now need a --with-qwt=<dir> to be able to build bat.
1160 kes Update src/win32/cats/bacula_cats.def to include the new
1161 db_get_query_dbids() call on Win32.
1163 kes Correct a problem when selecting a scratch volume and moving
1164 it to another pool that lost some columns.
1165 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
1166 kes Enhance Autochanger error messages to include Volume and device name.
1167 kes Rework prune_volumes() code to take account of InChanger flag,
1168 and to handle recycling volumes going to the Scratch pool and
1169 current pool because the RecyclePool directive.
1170 kes Implement a better and more efficient db_get_query_dbids() to
1171 handle creating and passing back a list of DBIds.
1175 kes Start work on new more efficient DBId subroutine. First use
1176 will be for recycling volume to Scratch inchanger.
1177 kes Increase number of JobIds in pruning from 1000 to 10000.
1178 This to be replaced by above routine.
1179 kes Begin implementation of building Qt4 on Win32.
1180 kes Correct typo in fix I added for bad TLS shutdown.
1181 kes Pull 2.0.3 patches into patches directory.
1182 kes Update Release notes. Include qt-console in line count.
1183 kes Update Projects file.
1185 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
1186 bug in migration code where a job that spanned two volumes
1189 kes Implement new BST_DESPOOLING blocked state. Change from locking
1190 during despooling in SD to blocking. This means that other threads
1191 can work with the device structure, in particular the reservations
1192 system while despooling.
1194 kes Fix return in reservation message queue that missed clearing
1195 the jcr lock (implemented 26Jun07 below).
1196 kes Rename a number of dev methods to make locking function names
1198 kes Document locking in lock.c. Move lock structures to new file
1201 kes Move reservations message lock to lock jcr only this
1203 kes Move main SD locking code into lock.c (new file).
1204 kes Update Win32 build to include lock.c
1208 kes Dirk committed the qwt library code for drawing graphs in bat.
1209 kes Tweak install of qwt so that it is integrated with ./configure.
1211 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
1212 out by Eric (my typo).
1213 ebl Fix configure.in to get batch mode enable
1214 kes Return correct string from authenticate.cpp in bat when connecting
1216 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
1217 spurious line drops when using TLS.
1218 kes Do not file reparse points when restoring a file that already
1221 kes Implement Windows reparse points -- similar to directories, but
1222 we do not descend into it. This is a first cut. They seem to
1223 be backed up, but restore is not yet tested.
1224 kes Remove restore_blocking in tls code when shutting a socket to leave
1225 it in blocking mode. Hopefully this will fix the encryption bug
1226 reported by Frank Sweetser.
1227 kes When opening a file for backup, tell the OS that we are going to
1228 read it sequentially -- optimization.
1229 kes Change variable names in authenticate_director() to not conflict
1230 with member names in bat. Caused great confusion with compiler,
1233 kes Queue openssl error messages in case of comm problem.
1234 kes Do shutdown() call if socket terminated.
1235 kes Remove some duplicated code in tls.c
1236 kes Move more of the bsock member variables into private and access
1238 kes Add Frank Sweetser's tls-test to the regression suite.
1240 kes Add Swedish sv.po file
1242 kes Don't print clock skew message in FD if less than 3 seconds diff.
1243 kes Add a bit of VSS info to status client.
1244 kes Implement a first cut of Vista VSS, using Win2003 code.
1246 Release: 2.1.20 beta
1248 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
1249 loaded tape but uses first drive).
1250 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
1251 This was indeed a Win32 issue.
1253 kes Simplify search of autochanger for in-use Volume.
1254 kes Fix exit condition of check for in-use volume. kes Remove
1255 inappropriate my_postgresql_free_result() in db_close()
1257 kes Fix bad return in FD when encryption signature not found.
1258 Probably caused a crash.
1259 kes Inhibit missing encryption signature error messages for
1260 file types where no signature computed.
1261 kes Correct inverted check on autochanger in reservation system.
1262 kes Tweak debug code in autochanger reservation.
1264 kes Add some additional locking in the cats directory in subroutines
1265 that modify packet variables called from batch insert.
1266 kes Rework how dcrs are allocated. new_dcr() can now be called
1267 with an existing pointer, and it will simply clean it up.
1268 This allows the reservation system to test various different
1269 devices, and will permit easy device changes.
1270 kes A bunch of changes all over to handle new new_dcr() calling
1272 kes Work more on the Volume management in the SD. Remember Volumes
1273 for tape drives and for autochangers (even virtual disk changers).
1274 kes When looking at the Volume list to reserve a drive, handle
1275 autochanger names correctly by interating through the changer
1276 devices. Also call the Director to see if a Volume is suitable
1277 for the current job.
1278 kes Fix some bugs in bscan. Make sure all media records are written.
1279 Make sure that valid JobMedia records are written for disk files.
1280 Previously they were completely wrong.
1281 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
1282 that the URLs don't change and so that the developers will all
1283 work off the same copy. Rebuild from scrach.
1284 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
1286 Release: 2.1.18 beta
1288 kes Fix seg fault in FD from incorrect digest size.
1289 kes Fix argument to non-OpenSSL crypto.c subroutine.
1291 Release: 2.1.16 beta
1293 kes Remove a few malloc()s from the encryption code.
1294 kes Use the class calls to bsock in filed/backup.c and restore.c in
1295 place of the old bnet_xxx code.
1296 kes Implement code that does an on the fly calculation of the
1297 signing digest during restore of encrypted files. It makes
1298 a best guess at the algorithm, and if it is not correct, will
1299 then revert to the old code which reads the file after it is
1301 kes Implement at least one missing crypto stream in stream_to_ascii()
1302 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
1303 #877 where a reload with bad syntax causes Dir to exit.
1305 Cut: 2.1.14 beta (not released)
1307 kes Do not free a volume on a tape drive until another volume is
1308 mounted and read, or the autochanger unloads the volume.
1309 This should help the SD re-use volumes that are already mounted,
1310 and should fix bug #886.
1311 kes Apply patch from user brettedgar that allows gnome2-console include
1312 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
1313 kes Apply patch from Lucien Weller that fixes day of week calculation
1314 because of DST flag problem. Fixes bug #887.
1316 kes Move find_next_appendable_volume() to after acquiring a valid device
1317 in reserve.c. This fixes bug #864 -- confirmed by reporter.
1319 kes Unable to reproduce bug 872. However added additional testing for
1321 kes Bug #874 resolved by documenting SQLite limitations.
1322 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
1323 kes Bug #881 resolved by removing typo in mtx-changer script.
1324 kes Made Frank Sweetser's wiki the official Bacula wiki with his
1325 approval. Added a link to the wiki on the web page, and implemented
1326 a backup from http://paramount.ind.wpi.edu
1328 kes Fix update allfrompool to pass pool name.
1330 kes Convert to pure GPL v2 license.
1331 kes Fix sscanf problems reported by Peter Buschman that caused
1332 a bus error on Solaris.
1333 kes Rework (simplify) the select prompt in bat.
1334 kes Move get_jobid_from_tid() into lib and create a
1336 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
1337 should definitely fix the problem of lost error messages in the
1339 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
1340 kes Eliminate tcpd.h from the project. Enclose the #include from the
1341 library with extern C ...
1342 kes Add print of signal name when a signal is trapped.
1344 Release: 2.1.12 beta
1346 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
1348 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
1349 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
1350 makes SQLit3 run 30 times faster, though a bit less safe.
1351 kes Implement --with-batch-insert in configure and detection of thread
1352 safe libraries. It is on by default, but turned off if no thread
1353 safe library (e.g. SQLite 2) is available.
1355 kes Fix Bacula PostgreSQL buffer overruns.
1356 kes Do better checking for NULL results returned from PostgreSQL;
1357 implement retry for failed queries; clear results buffer after
1358 failed query. Hopefully this will correct the PostgreSQL failures.
1360 kes Implement algorithm to handle only one appendable volume with
1361 Prefer Mounted Volumes = no.
1362 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
1363 returned from a query.
1364 kes Make volume lock recursive.
1365 kes Implement an additional volume reservation algorithm that
1366 starts by considering all reserved volumes then uses the
1367 old brute force algorithm of searching the resources to
1368 find a suitable device.
1369 kes Add new reservations debug code and refine the old code.
1370 kes Update the win32/dll/bacula.defs file.
1372 kes Tweak reservations algorithm to permit a few more cases, i.e.
1373 volume reserved, but on different drive, ...
1374 kes Enhance SD status to include Pool and Media Type for drive in a
1375 more readable format (a bit longer).
1376 kes Fix PostgreSQL double free.
1378 kes Minor refactoring of restore decryption code.
1379 kes Add code to smartall.c to detect double free of a buffer.
1381 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
1382 so that bsmtp will create a correct email address (mailbox only).
1383 kes Modify 'memory' command so that the buffers are listed as 'In use'
1384 to avoid confusion with Orphaned buffers.
1385 kes I reworked the OpenSSL include/lib flags to be handled in
1386 the standard Bacula way, which should fix bug #863 concerning
1387 non-standard OpenSSL libraries.
1389 kes Implement Help Browser window for bat.
1390 kes Fix reload bug that reset StorageId to zero.
1392 kes Fix TLS #ifdefing when TLS turned off.
1393 kes Ensure that when labelling a tape with Slot=0 that InChanger
1395 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
1397 kes Add StartTime to final uar_sel_jobid_temp query so that we can
1398 add DISTINCT (required by PostgreSQL).
1399 kes Implement BSOCK authenticate_director() method. Eventually will
1400 authenicate all daemons.
1401 kes Move several more functions into the BSOCK class.
1403 kes Add code to tell the OS that we no longer need a cached
1404 file that we were reading. In findlib/bfile.c. Also,
1405 only cache files that we are reading. Thanks to
1406 Tobias Oetiker <tobi@oetiker.ch> for the idea.
1407 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
1408 kes Implement script to automatically generate cats and dll .def
1409 files for Win32 dll.
1410 kes Update README.mingw32 to include new .def file generation.
1411 kes Correct typo in UTF-8 error message as reported by:
1412 jhernandez <julianhernandez@gmail.com>
1413 kes Add additional sm_check() code on debug level 1.
1414 kes Set default debug level to 1.
1415 kes Trap SIGABRT in attempt to get traceback.
1417 kes Reduce bat connect timeout from 30 to 15 seconds.
1418 kes More restructuring and implementing BSOCK class in place of
1420 kes Remove a few unnecessary malloc() tests in crypto code.
1421 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
1422 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
1423 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
1425 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
1427 kes Fix Verify InitCatalog. The attributes were not pointing to the
1428 correct saved location.
1429 kes Implement message callback so that GUI is sure to get all
1430 daemon messages. Currently displayed in a dialog in bat.
1431 kes Ignore SIGUSR2 (Bacula timer) in bat.
1432 kes Apply regress patch from bug #859 to allow regress to work
1433 with Solaris compiler.
1435 kes Begin adding TLS support to bat.
1436 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
1437 clean up lex.c and make it more readable.
1439 kes Move more bnet functions into the BSOCK class.
1440 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
1441 kes Complete change of berrno strerror() method to bstrerror()
1443 Release: 2.1.10 beta
1445 kes Cleanup incorrect email addresses in bsmtp.
1446 kes Make bat display initial messages rather than discard them.
1448 kes First cut of adding .mod to the run command.
1449 kes Implement auto display of messages in bat.
1450 kes Enhanced preferences to allow all Bacula output to be
1453 kes Try to make bsmtp date routines more generic.
1454 kes Fixed bug #856 autochanger documentation.
1455 kes Rework bsmtp date editing for Win32. This fixes bug #854.
1456 kes Add new cats entry point so Win32 builds.
1458 kes Attempt to fix bsmtp date editing on OSes without %z editing.
1460 kes Do better checking for the MySQL 64 bit libraries looking for both
1461 .a and .so libraries.
1462 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
1463 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
1464 kes Require the thread safe version of MySQL during configure. Thanks
1465 to Andre Noll for pointing this out.
1466 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
1467 continuing in migration code.
1468 kes Apply implementation of tray-monitor font derived from gnome-console
1469 submitted by Andreas Piesk <a.piesk@gmx.net>
1471 kes Eliminate important memory loss in SQLite
1472 kes Fixed the batch insert MySQL thread specific data that was not
1473 being freed. See cats/mysql.c:db_thread_cleanup().
1474 kes Fix restore before command.
1475 kes Convert old hdr.name to name() in a few places.
1476 kes Implement update jobid command.
1477 kes Return all time_t dates in db_get_job_record()
1478 kes Stop watchdog in SD earlier.
1479 kes Put Pool just after Storage in please mount message.
1480 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
1483 kes Update the po files.
1484 kes Fix Verify InitCatalog by making it cache attributes.
1486 kes Change name bacula-bat to bat for man 1 page to correspond to
1488 kes Check for client and store NULL pointers in status command. This
1490 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
1491 kes Fix sign extended editing of %p.
1492 kes Clean out a little old #ifdefing in cats/mysql.c
1494 kes If time diff between DIR and FD is more than 600 seconds convert
1495 INFO message to WARNING.
1496 kes Implement heap size display in status for all daemons.
1497 kes Attempt to fix MySQL db open memory loss (not successfull).
1498 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
1499 kes Eliminate memory loss in MySQL (possibly other SQLs) during
1500 Query. This looks like a MySQL but but by doing extra releases,
1501 the memory goes away. This should fix bug #847.
1503 kes When backup fails, cancel SD before waiting for sd termination.
1504 kes If SD is waiting for FD to connect during cancel, wake up the
1506 kes Fix fsf code so that errno is correctly reported.
1507 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
1509 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
1510 so that Bacula doesn't later stumble into a seg fault.
1511 kes Use the term Restore Client in the restore Job report.
1512 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
1513 the original job's FileSetId.
1514 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
1515 spooling in migration jobs. Not yet tested.
1516 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
1517 reading conf file from a pipe. However, do it with open_bpipe()
1518 rather than popen. Not yet tested.
1520 kes Fix an ugly bug where the VolCatBytes were getting updated
1522 kes Implement bconsole memory command that prints current memory
1523 usage, plus smartalloc dump.
1524 kes Clarify some error messages in backup, admin, and migrate.
1525 kes Shrink label dialog to smaller size.
1526 kes Invert Cancel OK buttons on restore to be OK Cancel.
1527 kes More strerror() to bstrerror() conversions.
1529 kes Start implementing bstrerror() in place of strerror().
1530 kes Stripping path -- seems to work.
1532 kes Prevent door and port files from being restored (mostly
1534 kes Free an unreleased buffer in compat code.
1535 kes Change console Job name from *Console* to -Console- to eliminate
1536 Win32 filename problems. Put Win32 path separator when creating
1537 Console file. This fixes bug #846.
1538 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
1540 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
1542 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
1543 to force Win32 error message.
1545 kes First cut strip path. The data should be passed to the FD,
1546 but nothing is done with it yet.
1547 kes Enhance the digest and signature routines in the crypto
1548 library to accept a JCR and to use it to print error messages
1549 so that they will go in the Job report rather than the daemon's
1551 kes Simplify some of the verify signature code.
1552 kes Simplify a few of the alternative returns in the signature
1555 ebl Use only POSIX regex instead of GNU regex in breg.c for
1556 File relocation. It fix broken freebsd compilation.
1557 kes Convert all other Dir files to use new ua class message
1559 kes Tentative fix for missing digest signature in bug 807.
1560 kes Correct handle problem in new win32_ftruncate routine.
1561 kes Convert ua_purge.c and ua_update.c to use new ua class
1562 message routines for bat.
1564 kes Correct incorrect installation of LICENSE in Win32 installer.
1565 kes Display LICENSE at the beginning of the Win32 install.
1566 kes Attempt to correct the need for the png files to be installed
1568 kes Reapply my bat.conf install script in qt-console. I think I
1569 editted bat.pro instead of bat.pro.in and it was lost.
1570 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
1571 the /var/lock/subsys for subsysdir. Also corrects typos in the
1574 kes First cut update job.
1575 kes Correct configure to include qmake of src/qt-console directory.
1577 kes Make restore job yes/mod/no print in one command so GUI works.
1578 kes First cut implementing backup and restore client.
1579 kes Correct editing in Verify output that caused a seg fault.
1581 kes Insure that bat.conf is not overwritten during installation.
1582 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
1583 while I was implementing migration in March 2006 !
1585 ebl Cleanup file relocation, using char *RegexWhere instead of
1586 char *where + bool where_use_regexp
1587 kes Update some manpages and add bat manpage.
1588 kes Make a first cut at converting bacula.spec.in for bwx-console
1590 kes Apply patch from John Goerzen to add hostname as fourth argument
1591 to make_catalog_backup script.
1592 kes Fix typos I introduced into bsmtp.c
1593 kes Make pm_strxxx() routines handle input of NULL pointer. This
1594 is to protect from NULL pointers returned from SQL databases.
1595 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
1596 kes Add more debug to FIFO code -- fix fifo regression test.
1598 kes Implement posix_fadvise in FD, and for reading spool files in SD.
1599 kes Add thread timer to bnet_connect() to break from OS if wait time
1602 kes Update Win32 build to include new files, new symbols, and
1604 kes Implement socket level heartbeat (tcp_keepidle)
1605 ebl Commit File relocation patch
1606 kes Make bat have 'make install' target.
1607 kes Warn during install if old gnome-console binary found.
1608 kes Warn during install if old wx-console binary found.
1609 kes Add -8 option to bsmtp command line to add content type utf-8.
1610 Fixes bug #809. (Character coding problem in bsmtp).
1611 kes If < is found in target (from, to, cc) then do not enclose the
1612 target in < > in bsmtp. Fixes bug #772 (malformed address).
1613 kes When printing certain items in dbcheck, stop after 300000.
1614 Fixes bug #822. (dbcheck loops).
1615 kes Incorrect status in Dir after waiting for mount with poll set.
1618 kes Extend idea of Prefer Mounted Volumes to mean a volume about
1620 kes Print waiting to reserve a device every 5 mins.
1622 kes Don't call close_part in label.c if tape and relabel.
1623 kes Don't free volume if busy in close() -- should help with
1625 ebl Fix #824 RunScript bug (After script could be execute twice)
1626 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
1627 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
1628 Add a regression script to test RunScript
1630 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
1633 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
1634 deprecated. No additional bugs will be fixed, and they will be dropped
1635 in a future release (probably 2.4.0).
1636 kes Change name of wx-console to bwx-console to make it more Bacula
1638 kes Change the name of gnome-console to bgnome-console to make it
1641 kes Some time in March, a Feature Request with patch from Jorj Bauer
1642 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
1644 The ability for the director to validate a Client (FD) CN against
1645 an arbitrary set of patterns rather than the hostname, with
1646 A new 'TLS Allowed CN' set of directives which are implemented
1647 in the Client resource. Then pattern matching is used in place
1648 of hostname matching against the Certificate's CN. As an example, we
1649 have certificates which (a) use a local CA, and (b) have a CN of the
1651 kes Add new/changed entry points to Win32 build
1652 kes Create unaccepted-projects for projects that are not accepted.
1653 kes Simplify locking in the reservations system.
1654 kes Add more debug code in reservations.
1655 kes Make sure error condition on reserving a volume is handled correctly.
1656 kes Correct handling of volume_in_use.
1657 kes Correct handling of initializing a device.
1658 kes Move handling of broadcasting releasing a device into release_device().
1659 kes Correct attaching dcr to dev so that it is only done if device
1660 is properly initiated.
1662 kes Locking debug level tweaks in SD.
1663 kes Tweak new Volume code.
1665 kes Add exec external-command [wait-seconds] to bconsole. This
1666 executes the external-command. Note! normally external-command
1667 should be enclosed in double quotes.
1668 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
1669 it should normally be off in a production system.
1671 kes Implement die command for SD so that we can force it to dump.
1672 kes Implement SD lock debug code.
1673 kes Implement new algorithm for keeping Volume list in SD. It
1674 is now owned by the device.
1676 kes Implement new code for freeing in use volumes that should
1677 resolve if not all, some of the problems of multiple drive
1678 tape conflicts described in bug 801.
1680 kes Fix gui/bacula-web/images files in svn.
1681 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
1683 ebl Fix a bug in batch mode (in string escape)
1684 kes Correct migration prune SQL typo that crept in in a
1685 recent 2.1.x change.
1687 kes Move bnet_despool() into class in bsock.c
1688 kes Modify job report to include director name and Build OS.
1689 kes Move drop root privilege and check_catalog() before fork.
1690 kes Add update database scripts (version 9 to 10) to updatedb directory.
1692 ebl Check size and age of each file after its backup to see if
1693 it has changed during backup, if 'checkfilechanges' is set.
1694 The FD will do an extra check (stat(2)) after
1695 each file backup. mtime, ctime and size are compared with
1696 'before backup' information. If time or size mismatch, an
1697 error message will be generated. You must upgrade FD to use it.
1699 kes Make database name and user configurable
1700 --with-db-name=xxx --with-db-user=xxx
1701 kes Add back database type to message.c for debugging.
1703 kes Implement dir_sql() which issues an SQL query.
1704 kes Modify bat medialist to use dir_sql() and do some minor C++
1705 formatting as well as eliminating a number of pointers, simplifing
1708 kes Fix some of the mtx-changer grep commands for tape label readers.
1709 kes Convert a number of bsendmsg into the appropriate send/warning/error
1710 message class calls.
1711 kes Suppress the using database message in the .sql command.
1712 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
1714 kes Add context menu for floating a window.
1715 kes Some minor cleanup and name changes in qt-console
1716 kes Add doing mt setblk 0 in Win32 mtx-changer.
1717 kes Apply Martin's bug fix to move definition of ENODATA for
1719 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
1720 sqlite2 and sqlite3.
1722 kes More pruning cleanup.
1723 kes Turn on wait_for_drive by default in mtx-changer.
1724 kes Turn on Batch insert code by default as it now passes regression.
1725 kes Add ./configure --enable-bat to enable building of Bat.
1726 No install yet though.
1728 kes Implement a new .sql command for bat.
1729 kes Implement code to turn off pruning in obtaining the next volume.
1730 Pruning is turned off for the status dir command, but turned on
1731 for SD requests and for the list nextvolume command.
1733 kes Correct Qmsg() that was not updated correctly when committing a
1734 previous change (probably the recent TLS patch).
1736 kes Write new subroutine is_volume_purged() that explicitly checks
1737 if the Volume is purged, and if so marks it as such. This should
1738 resolve problems reported about needing to mount twice to recycle
1740 kes Rewrite pruning algorithm to do more work in the SQL engine, and
1741 to pass a list of JobIds to be deleted to SQL. Also, minimize the
1742 amount of duplicated code.
1743 kes Do volume pruning only for the Media Type desired (reduces pruning time
1744 if multiple Media Types are in the same pool).
1745 kes Implement more detailed info in the Job report for the Bacula version
1747 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
1749 ebl Add bbatch tool to bench database and insert mode.
1750 Fix sql quote stuff in batch mode
1751 Fix sql stuff for mysql
1753 kes Correct problems with am/pm scheduling. Fixes bug #808.
1754 kes Implement new prunning code that prunes up to 1000 jobs at
1755 the same time. The same technique can be applied to a number
1756 of other prune/purge subroutines.
1757 kes Add an insanity check when starting a new tape job to ensure
1758 that the tape position has not been changed. If so fail the
1760 kes Fix Win32 build for dlls to add the folllowing:
1761 src/lib/bsock.c -- new file with new entry points
1762 src/lib/dlist.c -- new entry points
1763 src/cats/sql_create.c -- new entry point
1764 src/cats/sql_cmds.c -- new DATA item exported
1766 ebl batch mode cleanup bscan-test is ok now.
1767 kes Implement SD code to check length of disk volume before appending.
1769 kes Correct return status on db_batch... routines.
1770 kes Add call to db_write_batch_file_records() to migration code.
1771 ebl Fix AfterJob timing
1772 kes Move the checking of the database in initializion of the Director
1773 to after we drop privileges. This avoids the need for both root
1774 and bacula access to the DB.
1775 kes Correct a misplaced variable definition in src/filed/backup.c
1776 kes Correct how the new batch insert db_create_attributes_record()
1777 uses the arguments. Caused a seg fault in bscan.
1778 kes Implement lock() and unlock() methods in DEVICE class.
1779 Implement block() and set_block(xx) methods in DEVICE class.
1780 kes Modify bnet_connect() so that it uses time() to check for the
1781 wait time expiring (on some OSes, some system calls may not
1782 return immediately).
1783 kes Modify Verify to obtain the previous JobId when it is actually
1784 running rather than at schedule time (as it was in 1.38.x).
1785 kes Fix src/job.c to handle MaxWaitTime correctly. This should
1787 kes When checking pid in pid file, continue running if the pid is
1788 the same as ours. This occurs on IRIX after a system crash.
1791 kes Extend new GUI API.
1792 kes Make the ua structure a class, and implement send_msg(),
1793 error_msg(), warning_msg(), and info_msg().
1795 kes Apply fix from for building wx-console on the Mac from
1797 kes Implement new select mechanism for GUI programs.
1798 kes Reorganize initialization of stackedWidgets in bat.
1800 kes Add updated nagios plugin supplied by Christian Masopust.
1802 kes More bat implementation.
1803 kes File migrate bug with Pool Occupancy using mediaid instead
1804 of jobids. Fixes bug #795.
1805 kes Fix orphaned buffers in filed backup and verify due to
1806 crypto buffers not freed during errors. Fixes bug #789.
1807 kes Extend new GUI api code to tree commands.
1808 kes Ensure that tree and dot commands check console ACLs.
1809 kes Permit marking directory with trailing slash.
1810 kes Allow 20 console connections (instead of only 10).
1812 kes Add smartctl call to bacula-sd.conf as an example of getting
1815 kes Modify jobq.c to let simultaneous restore jobs run. This may
1816 cause them to fail if they cannot get a drive.
1817 kes Add Client Connect Wait to Storage daemon to permit users to
1818 modify the time the SD waits for a FD connection.
1820 kes Correct virtual changer check which was backwards. This caused
1821 volumes to be unloaded into slots already occupied.
1823 kes Apply Command ACL filter to JobId list in restore command.
1824 kes Correct typeo in var.c patch.
1826 kes Don't let Bacula prune File or Job records for the current Job.
1827 kes Fix variable substitution pad + inc bug reported (with patch)
1830 kes Correct SQLite log table index as reported by Luca Berra.
1832 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
1834 kes Begin implementing new comm signals for API.
1835 kes Fix a few places in lib/message.c where the open fd may
1837 kes Continue implementing lib/bsock.c (real class). Make jcr,
1838 who, host, and port private. There are new methods to access
1839 them for non-class use. This required touching a number of files.
1841 kes Add LANG=C to autoconf/randpass so it works with languages other
1842 than English. Fixes bug #788.
1844 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
1846 You will not be able to generate Include/Exclude list any more.
1847 It will be fixed soon.
1848 If you want to use this, you can apply
1849 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
1851 kes Restore of sockets created false error messages because Bacula
1852 no longer restores sockets, but the code was still trying to
1853 set the attributes on a non-existent file. Reported by a user.
1854 ebl finish RecyclePool feature
1855 Media will takes Pool.RecyclePool
1856 when moving from Scratch to a Pool or when user will do
1857 update volume=xxx frompool
1858 To use it, add RecyclePool = aPool to your Pool resource
1861 RecyclePool = Scratch
1865 kes Expand new BSOCK class adding signal() and new BNET signals.
1866 kes Begin enhancing the dot commands adding a new API function
1867 that returns more information and will make it easier
1868 to interface to the Director from a program.
1870 kes Make DEVICE fd private. Its new name is m_fd, and can be
1871 obtained with dev->fd() outside the class. This is the
1872 first of many DEVICE members to be made private.
1873 kes Implement Michael Renner's idea on having a virtual disk
1874 changer. I made some minor modifications (e.g. I did not
1875 implement the Virtual Changer directive, but simply set
1876 the Changer Command to an empty string.
1878 kes Implement a BSOCK send() method that writes the whole record
1879 in a single write() request rather than in two.
1880 ebl add update volume=xxx recyclepool=yyyy
1881 volume takes recyclepool from pool when using update volume=xxx from pool
1883 kes Fix encryption deblocking bug, which caused some restored files
1884 to be truncated. This fixes bug #763.
1885 kes Add FD event sequence order prepared by Eric -- for RunScripts.
1886 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
1888 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
1889 ebl Use btime_t instead of uint64_t in media patch.
1891 kes Optimize the use of the database a bit in the Status dir command.
1892 Only open it when needed, ensure that if any previous database
1893 was opened, it is closed.
1895 kes Correct VolCatBytes bug from media patch.
1896 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
1897 in the case of orphaned records.
1898 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
1899 and File records in 300K chunks to be more efficient. This
1900 idea came from Juan Luis Frances (if I remember right).
1901 kes Apply Eric's scratch patch that moves a purged Volume to
1902 the RecyclePool. Question: how is RecyclePool set? what
1903 happens to the ScratchPool?
1904 kes Apply Eric's media patch that collects read/write media
1905 times as well as byte counts. This patch requires a
1906 simultaneous upgrade of the DIR and SD. Note, there
1907 should be some way to turn off timing. I'm not sure
1908 times are in Bacula units.
1909 kes Apply Eric's batch-insert patch.
1911 kes Update projects list.
1913 kes Implement Include/Exclude file lists in FD as dlists using
1914 the new dlistString class. This permits efficiently having
1915 large include/exclude lists and completes project Item 25.
1916 kes Fix dird/ua_cmds.c so that a cancel command checks if the
1917 console is authorized to cancel the job. This fixes bug
1919 kes Modify SD so that the VolCatJobs medium record is updated
1920 at the beginning of a Job rather than the end. This
1921 fixes bug #775 where exceeding MaxVolJobs caused jobs
1923 kes Added a mutex around getting and setting Volume information
1924 so that multiple simultaneous jobs will single thread.
1926 Switch to using Subversion
1927 kes Remove src/pygtk-console/ from configure
1929 kes Delete src/lib/btree.c from win32 build, then add rblist.c
1930 plus the entrypoints.
1931 kes Apply patch supplied that corrects debug print
1932 in canceling jobs for max run time. Supplied as
1933 part of bug #621, which was previously fixed.
1935 kes Test on job_canceled() and sd_msg_thread_done inside
1936 loop starting the message thread to avoid a race condition.
1938 kes Remove rl_catch_signal from console.c as it conflicted
1939 with the header definition. Fixes bug #765.
1940 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
1942 kes Clarify some stored/acquire messages to indicate if the
1943 problem is with read or append.
1945 kes Fix memory leak with storage ids in cats/sql_get.c
1946 kes Terminate watchdog earlier to avoid reference to released
1947 memory -- reported by Jason Austin.
1948 kes Move closing the database from jobq.c to the director daemon
1949 termination routine. This fixes memory leaks for shadow jobs
1950 (i.e. migration jobs).
1951 kes Free up the unique jobid chain items in migrate.c. This fixes
1952 a memory leak problem.
1953 kes Convert some ugly looking for statements to use foreach_alist
1954 in findlib/find.c. This will facilitate converting the structures
1955 to use dlist (for large include/exclude lists).
1956 kes Fix a bug in the btree.c and btree.h routines, then rename them
1957 rblist and add them to be built in src/lib. Include some new
1958 methods written by Rudolf Cejka that make the code more readable
1959 (hides some of the ugly casting).
1960 kes Add set_next() and set_prev() methods which make the code much more
1961 readable. Also add a new dlistString class that facilitates storing
1962 strings in dlists. To be used in the large include/exclude lists.
1963 kes Make some trivial modifications to lib/tree.h that use rblist
1964 rather than dlist for storing the tree links. This was suggested
1965 by Rudolf Cejka. The result of this is that the restore tree now
1966 uses red-black binary trees rather than simple linked lists. This
1967 should give rather dramatic speed improvements for directories
1968 contining large numbers of directories/files (more than 10000).
1970 kes Fix maxruntime bug #621.
1972 ebl Implement the include JobID in spool file name project.
1973 kes Reorder projects file in order determined by Jan 2007 vote.
1974 kes Implement item #12 on project list -- quick release of FD by
1976 kes Fix open of SQLite3 db where user does not have write permission
1977 so that DIR does not crash. Fixes bug #761.
1979 kes Add back missing @ in Win32 Makefile.
1980 kes Change 'Device not configured to autolabel' from INFO
1982 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
1983 which should restart an indefinite # of times.
1984 kes Fix configure --help to print --with-mysql[=DIR]. Same for
1985 other DIR specifications.
1987 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
1988 Fix path quoting in SQLite scripts.
1989 Fix problems with SHGetFolderPath.
1991 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
1993 kes Fix Job restart on error bug that promotes an Inc to a Full
1994 backup. This should fix bug #755.
1995 kes Add qt-console and first cut of code.
1999 kes Fix Bacula->Documentation link on Win32 to point to index.html
2000 instead of bacula.html. Fixed bug #750.
2001 kes Return JobId in db_get_job_record() when JobId==0. This should
2003 kes Do not release source pointers when restarting a failed job.
2005 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
2006 This *should* fix bug #747.
2007 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
2010 kes Modify USTORE constructor to set an empty store_source string,
2011 and don't copy the store_source string in a cancel. Hopefully
2012 this will fix Arno's seg fault, bug #744.
2013 kes Add back code to disable conio in configure. Fixes bug #743.
2014 kes Correct the Options scanner in the FD to correctly handle
2015 SHA1 option, which was eating the next option. Reported by
2017 kes Add code to indicate when the SD is spooling, spool wait, and
2018 despooling as requested by Alan Brown.
2020 Version 2.0.0 released: 4 January 2007
projects / bacula / bacula / blob