1 Technical notes on version 2.5
9 Multiple command/console per runscript
10 console command in runscript
13 State file updated on job term
16 Duplicate Job directives
17 - Allow Duplicate Jobs
18 - Allow Higher Duplicates
19 - Cancel Queued Duplicates
20 - Cancel Running Duplicates
21 Ensure they work with RerunFailedLevels
25 Improved status commands for Bat
26 Spooling/despooling status
27 Implement ftruncate for NFS devices
28 Add long term statistics job table
34 kes Add code to interface OpenSSL to new Win32 pthreads code which
35 used a structure for thread_t.
37 ebl tweak bat for win32 compilation
39 ebl Remove tokyo cabinet from the source
40 ebl Update configure/autoconf to support berkeley DB
41 ebl Add a sort to db_get_file_list() to improve bsr construction time.
43 kes Add a mtx-changer.conf file that is not overwritten during
44 an upgrade. It fully configures the mtx-changer script.
45 kes Clear in-use bit on vol when unused while swapping.
47 kes Remove sleep at end of ./bacula
48 kes Clear hash packet for hardlinked files correctly. This corrects
49 a long standing bug where hardlinked files selected individually
50 would occasionally not be restored.
52 kes Apply Eric's patch to ensure that autoprune does not return
53 a Volume not in the autochanger unless requested to do so.
54 kes Correct bat restore display of multiple drives. This fixes
56 kes Do find_a_volume() each time an unload is done. This
57 fixes the failure of maxvol2-test.
59 kes Add some SD debug code.
60 kes Do find_a_volume() each time an unload is done.
61 kes Apply Joao's DBI patch that adds easier configuration of DBI drivers,
62 and adds --with-db-port to ./configure.
63 kes Use Qmsg() in job.c watchdog callback.
65 kes Release main control rwlock if ABORTing.
66 kes Make watchdog connect timeout queue messages rather than sending
67 directly to avoid lock conflicts with the real thread.
68 kes Add const char in dbd.c to avoid compiler warnings.
69 kes Fix python compiler string warning. Note, IMO the GNU C++
70 compiler guys have made a *very* bad change to their compiler.
71 They now force all strings to be 'const' unless you explicitly
72 cast them, which is extremely ugly and ruins nice code as well
73 as creates a lot of useless work.
75 kes Fix mtx-changer to detect both versions of Ubuntu (Debian)
76 mt. This fixes bug #1116.
77 kes Add const in python files to reduce compiler warnings.
78 This may have to be backed out because of later compiler
80 kes Fix failure of 2drive-concurrent-test. Always read label;
81 clear_unload() only after drive is defined in acquire_for_read().
83 kes Generally clean up the manual tape loading code. The main
84 conceptual change is that when a volume is marked to be unloaded,
85 its volume name is retained, and it is only marked as unloaded
86 when either the autoloader says it is unloaded or another tape
87 is read on that drive.
89 kes Add debug code and refactor subroutine in stored/mount.c
90 kes Fix format problem in bscan output reported in bug #1105.
91 ebl Fix get_next_volume_for_append logic with autochanger
92 - use pruned volumes if found
93 - don't reset the inchanger flag after getting a recycled volume
95 Fix recycle_oldest_purged_volume to take InChanger flag in account
97 ebl Add mmap/unmmap implementation for tokyodbm under win32
99 kes Make first step toward eliminating globals from config
100 scanning. Also should be a workaround for FORTIFY_SOURCE
101 GNU C bug -- fixes bug #1042.
103 kes Apply duplicate job tests to restarted jobs.
104 kes Copy more data when restarting a job so that run
105 overrides are kept. This should fix bug #1094.
107 kes More word alignment cleanup.
108 kes Fix bug where SD did not ask operator if the device could not
109 be opened. Reported by Eric.
111 kes Add dbuser to DIR conf file (replaces user).
112 kes Add --with-db-password to ./configure
113 kes Fix regress to handle db_password.
114 ebl Add new "status storage slots" that list autochanger
116 ebl Update vtape driver to compile only under Linux.
117 ebl Fix a bug when restoring with a wrong mediatype.
119 kes Eliminate ints from conf files and structures to avoid
120 word alignment problems
122 kes Fix bug reported by Scott Barninger where the bacula script
123 refers to scripts in the wrong directory. Needed to meet the
124 requirements of recent FHS location changes.
125 ebl Disable vtape for FreeBSD.
127 ebl Modify disk-changer to check if slot contains something before
130 ebl Fix vtape on win32 and debian.
131 ebl Fix autoselect patch (cause segfault).
133 ebl Fix autoselect option broken for a while. Fix #1089. Need some
134 work with StorageId to be able to use a particular drive in a
137 ebl Rename vtape to vtape.
138 ebl Update vtape driver.
140 ebl Modify vtape driver to avoid sparse file.
141 kes Add make clean of qt-source directory during ./configure
142 kes Store last block number written to tape in DEVICE and
143 use it for testing for correct last block on EOT.
145 Release Version 2.4.0:
149 kes Make sure to clear JS_WaitMedia when operator mounts a Volume.
150 This fixes bug #1095.
152 kes Add create_postgresql_database.sql to Win32 installer. Should
153 fix problem reported by Juilio Monteiro.
154 kes Get correct slot when auto unloading a device. This fixes bug
157 kes Fix multiple media restore.
158 kes Make DEVICE Slot private and access it via a method.
159 Allows better control over when it is set and cleared.
160 kes Fix possible seg fault if SQL error.
162 kes Add Martin's fixes to argument scanning for the estimate
163 command. This fixes bug #1093.
164 kes Add debug code to SD.
165 kes Fix renaming a Volume, which used the wrong Volume name.
167 kes If operator has rewind tape, print warning, release tape and
168 try once more. If tape is positioned somewhere, something went
169 wrong, so mark the tape in error and try once more. Previously
170 this error was fatal, now it produces an error message.
171 kes Ensure correct volume name displayed during restore
172 kes Ensure that Volume is mounted for restore.
174 kes Fix a few more Coverity reported problems.
176 kes Apply Allan Black's status dir job count patch.
177 ebl Add information about IMPORT/EXPORT slots in mtx-script.
178 kes Enhance a couple of SD debug messages.
179 kes Tweak unload flag setting and ensure it is set during swap.
181 ebl Fix #1091 about bad output in estimate command.
183 kes Modify autochanger locking to attempt to avoid race
185 kes Make sure device not busy before doing label command.
186 kes Display open() errors except when polling. Previously too
187 many were suppressed. This should fix bug #1070.
188 kes Fix Win32 reparse points. Bacula will not recurse into any
189 reparse point directory, including mount points, unless the
190 directory is explicitly mentioned at the top level (same as
191 with Unix). A file that is linked to another file will be
192 backed up -- much as Unix does for hardlinked files.
193 This fixes bug #1041.
195 kes Remove double quotes from ChangeLog and ReleaseNotes
196 kes Remove StorageId test when pruning and recycling (Eric's changes).
197 kes Remove old form of locking when getting volumes -- causes deadlock.
198 kes Change bat dirstat layoutWidget to dirstatlayoutWidget to make
199 the name unique and to eliminate compile time error.
200 kes Add accurate.o to Win32 FD Makefile
202 kes Fix cats dll build on Win32 after db_update_job_end_record
203 calling sequence change.
204 ebl Switch to tokyo dbm instead of htable in accurate code
205 ebl Include tokyo dbm to bacula source tree
207 kes Fix buffer overruns detected by Coverity.
209 kes Tweak joblog display.
211 kes Implement --without-qwt
212 kes Fix layout of restore tree dialog
213 kes Add configure bat QWT libraries, so that bat can be built
214 with or without the QWT libaries.
216 ebl Add dummy tape driver for regression tests.
217 kes Make sure we unload the right slot when swapping.
219 kes Add debug times, reduce size of two-pool-changer test
221 ebl Tweak autoconf scripts for vtape
223 kes Improve SD reserve debug code.
224 kes Testing an improvement to free up volumes no longer in use.
226 kes Rework SD acquire for read to handle autochanger Volume
228 kes Implement regression that explicitly tests swapping a Volume
229 from one drive to another.
230 kes Enhance disk-changer to detect most error conditions.
231 kes Fix SD code so that it properly swaps a Volume between drives.
232 This fixes bug #1083.
234 kes Apply libdbi patch from Joao Freitas for regress and for
235 Bacula trunk. Regress now works with libdbi. Nice.
236 kes Apply .nobackup patch from bug #1077 submitted by
238 kes Apply Bastian Friedrich's patch that adds %p to edit the pool
239 name into jobs cloned via the run directive.
241 kes Prevent a Volume that is being swapped from being freed from
242 the volume list. This will most likely fix, at least partially,
244 kes Fix strippath so that it does not get a buffer overrun and crash FD.
245 This fixes bug #1078.
246 kes Remove 50 millisec wait in SD that broke debugger.
247 ebl Add MaxRunSchedTime option that specifies the maximum allowed time
248 that a job may run, counted from when the job was scheduled.
249 ebl Fix MaxWaitTime option that specifies the maximum allowed time that
250 a job may block waiting for a resource, counted from when the job starts
251 ebl Rename (add) Max(Incr|Diff|Full)WaitTime to Max(Incr|Diff|Full)RunTime
252 kes Apply patch from bug #1076 by Tullio Andreatta <t.andreatta@troppoavanti.it>
253 that implements multiple commands per line in the console when using
254 readline. Modify the default to use a semicolon as the command separator.
256 ebl Fix SQL query in migration code.
257 ebl Make accurate mode with hash disk pass regression tests
259 ebl Implement first cut of accurate backup with hash disk.
261 kes Force unload of volume when wrong volume mounted in SD.
263 kes Fix bat seg fault at termination.
264 kes Add Bacula generated version to bat about box.
267 kes Experiment with allowing multiple read jobs.
268 kes Move final volume swapping code to DCR method and
269 call it from acquire_for_read().
270 kes When wrong volume is mounted during read, unload_autochanger.
272 kes Integrate the libdbi changes from Joao Henrique Freitas
274 kes Stop searching for Volumes in SD askdir if DIR returns the
275 same volume name twice in a row.
276 kes Close bat console windows first to eliminate error message
279 kes Tweak the swap Volume from one drive to another code so that
280 it now seems to work.
281 kes Resolve several problems with recycling that broke the new
282 code (these problems are in 2.2.9 as well).
283 kes Remove the volume lock when calling the sysop code.
284 kes Don't mark a reserved volume with no writers as unused otherwise
287 kes Rework class structures for VOLRES, DCR, and DEVICE to make
288 the method names a bit more logical, and for more logically
289 handling the responsibilities.
291 kes Remove redundant code in terminating the scheduler that just
292 causes a seg fault in many cases.
293 kes Cleanup releasing a volume and make it a DCR method.
294 kes Improve algorithm for detecting pre-reserved volume and
297 kes Tweak volume swapping code so it works.
298 kes Correct name overloading in mount.c
299 kes Replace released flag in VOLRES with reserved and add access
300 methods for the VOLRES class.
301 kes Prevent volume from being released while being swapped.
302 kes Apply Bastian Friedrich's edit codes patch for the bpipe-fd
304 kes Apply Bastial Friedrich's edit pool=%p patch for run clone
306 kes Refactor parts of stored/mount.c
308 ebl Add sanity checks for VolWriteTime and VolReadTime
309 ebl Take care of bad clock changes while computing VolWriteTime
310 and VolReadTime. This should fix or limit #1066
311 kes Correct error string numbers in dird/catreq.c
312 kes Restructure reserving, acquiring, and mounting volumes. Calls to
313 autochanger are deferred for mount.c -- simplifes the code.
315 kes Do not prune any running job. It just fails the job.
316 kes Lock the volumes when changing dev->reserved_device and marking
317 the volume unused otherwise the device can get reserved by
318 another job before the volume is released, thus blocking it.
320 kes Correctly detect Ubuntu systems, and add ubuntu platform directory.
321 kes Fix bug #1063, reuse of freed ptr in list nextvol.
322 kes Release regex compile buffer in filed/job.c
323 kes Add proper type of const char in sql_create.c
324 kes Turn off debug in daemon termination routines
325 kes Move free_volume_list() before devices are freed in stored.c
326 kes Fix reference to uninitalized stack variables in bregex.c.
327 This should correct bug #1067.
329 kes Fix possible seg fault in SD when freeing a volume entry.
331 kes Implement unload_dev() before swap device.
332 ebl Add statistics prunning with option and menu
333 kes Separate unload_dev() from unload_other_device() in autochanger.c
335 kes Apply patch from bug #1069 that corrects spurious error messages
336 when ACLs enabled on SGI but no ACL exists.
337 ebl Fix small segfault in bacula-sd when debug level is 500
338 kes Modify run_program() and run_program_full_output() to use
339 call by reference for the results string. This corrects a long
340 standing problem where the address of the string may be changed
341 in the subroutine but not in the calling program.
343 kes Re-enable code to remember last volume mounted on a non-tape
345 kes Add patch supplied in bug #1068 that fixes a SD crash when using
346 a Virtual autochanger.
347 kes Generate correct JobMedia records during spooling/despooling when
348 running concurrent jobs. Thanks to Tom Ivar Helbekkmo
349 <tih@hamartun.priv.no> for excellent analysis and testing.
351 kes Tweak hash algorithm for htable using Martin Simmons idea
352 for doing a circular shift.
353 kes Remember what volume is in VTLs (previously turned off for
355 kes Analysis of JobMedia records by Tom Ivar Helbekkmo <tih@hamartun.priv.no>
356 pointed out some problems in creating JobMedia records during
357 spooling with concurrent jobs. Fix the problem by updating the
358 start file position before despooling and generate a jobmedia
359 record at the end of despooling.
361 kes Fix handling of JobMedia records during spooling and when a
362 Volume is changed without actually writing data to the Volume.
364 kes Rework certain SD locking based on gdb tracebacks of deadlocks
365 sent by Eric. This code now uses only the volume_lock() rather
366 than the reservations lock when at EOM and acquiring a new
368 kes Ensure only one exit point in several subroutines.
370 kes Implement bsock code to permit locking. Use the new code in Verify
371 in the FD to prevent the heartbeat thread from disrupting the Verify
372 data sent to the Dir.
373 kes Modify SD locking to eliminate locking the reservations system from
374 outside the system. Use the volume lock when getting media data
375 and reserving a new volume at end of media.
376 kes Add Eric's volume_unused() fix to stored.c so that Volumes found
377 when SD starts are not locked into place.
379 kes Fix error compiling runscript code on 64 bit machines.
380 kes Tweak Win32 mount point code.
381 kes Fix a couple of bugs in the accurate code (bad sscanf, buffer not
382 cleared giving bad file estimate).
383 kes Implement BIG_MALLOC in htable code. Runs 2.5 times faster for
386 kes Keep Schedule run lists in order as suggested by
389 kes Implement autostart scripts for Debian.
390 ebl Implement upgrade catalog scripts.
392 ebl Apply jobstat patch for long term statistics. Have to implement
393 purge stats command and upgrade scripts.
394 kes Fix mtx-changer.in for broken Debian mt program.
396 kes Fix large number of JobMedia records reported by Eric Bollengier.
398 kes Apply doc fix from bug #1062.
399 kes Resolve crash and improper restore wx-console Win32 restore
400 GUI. Fixes bug #1065.
401 kes Update Win32 wxWidgets to latest version.
402 kes Attempt to do correct handling of Win32 mount points. Should
404 kes Fix Win32 FD backup/restore memory leak due to improper termination
405 of BackupRead/Write. This fixes bug# 1038.
407 ebl Reduce memory usage for accurate backup, working only with ctime
408 and mtime. (not all Lstat field)
409 About 40MB for my Linux system (400.000 files)
411 kes Add dcr->reserved_volume flag that allows us to release a volume
412 even if it is not vol->released. This allows maxvol2 to work when
413 Volumes expire and we are already writing to the device (i.e. a
414 volume is pulled out from under us by another job terminating after
415 we reserve the drive).
417 ebl Permit multiple command/console per runscript definition.
418 RunScript { command = /bin/true ; command = /bin/false ... }
419 ebl Add RunsWhen = AfterVSS to runscript. You can execute a command
420 (restart an application) just after the VSS snapshot on windows.
421 kes Don't zap dcr values during release_volume() as they might
422 have the next Volume to be mounted.
423 kes Fix AIX prototype.
425 kes Second cut of drive switching during backup.
428 kes Update Win32 version of wxWidgets to most recent version.
429 kes Tweak Copy job details.
430 kes Rework dir_find_next_appendable_volume to make a bit more effort
431 to find a suitable volume before giving up.
433 kes Make ask_sysop_to_create... to return if waken from wait.
434 This helps get out of blocked conditions.
435 kes Experimental implementation of switch_device in reservations.
436 kes Implement FD version to allow easier protocol changes.
437 kes Add Plugin Options string -- not yet passed to FD.
438 kes Implement PluginOptions ACL.
440 kes Attempt to correct problems with restores with autochangers and
441 use counts going negative
442 kes Rework SD status command and implement API for bat. Implements
443 header, runing waitreservation, devices, volumes, spooling,
444 and terminated status keywords.
445 .status storage=xxx <keyword>
446 kes Clarify TLS error message by adding double quotes around name.
447 kes Simplify SD/FD status code by putting api flag in STATUS_PKT
448 kes Pass jcr to tls routines so debug messages can be handled better.
449 kes Rework jobq resource allocation code, and possibly fix a bug
450 that caused reference counts to get out of sync.
452 kes Rename fd/dir plugin to use Bacula standard underscore.
453 kes Plugin work -- bring dir up to fd level.
454 kes Start implementation of VTL code
455 kes Fix Win32 build after adding new cats subroutine.
457 kes First cut at Duplicate Job implementation.
459 kes Fix bugs in MaxFullInterval and Implement MaxDiffInterval.
460 kes Start PluginOptions string, and refactor a bit of ua_run.c
461 ebl Apply Allan patch that permit to reset recyclepool.
463 kes Test patch -- possible fix or improvement for bug #1053
464 kes Refactor FD and SD status commands to permit new API code in
465 SD, and to fix Win32 build.
466 kes Win32 build is now working.
468 kes Implement 'MaxFullInterval' and start 'MaxDiffInterval' based on
469 some ideas in patch from Scott Bailey.
470 kes Begin implementation of duplicate Job control.
471 kes Fix some of Win32 build after recent additions.
472 kes Apply patch from Frank Kardel that implements 'honor no dump flag',
473 which causes the FD to detect whether or not the OS has the
474 honor no dump bit (*BSD systems), and if so, to skip backing up
475 any file with this bit set. The feature is enabled by setting
476 'honor no dump flag = yes' in the Options section of a FileSet.
478 kes Correct po warning message with datarootdir
479 kes Implement more code in dird.c to put configuration parsing in
480 a class rather than use globals.
481 kes Restructure SD status command for implementation of bat API
484 kes Suppress incorrect 'Will not descend from x into y' messages.
485 kes Eliminate FORTIFY_CODE=2 bug, and make first cut at removing
486 daemon globals used by parser.
487 kes Apply Joao's patch to separate DB_TYPE and DB_PROG in configure.
489 kes Fix free of plugin_list when none exists.
491 ebl Apply accurate project patch.
493 ebl Fix a segfault when using strip_path option. (Use of pm_strcpy
494 on non-mempool object)
495 kes First cut of converting FD .status to work with bat API.
497 .status client=XXX header
498 .status client=XXX running
499 .status client=XXX terminated
500 kes Implement first cut of Copy Job.
501 kes Implement Catalog in Pool resource. It overrides catalog specified
502 in the Client resource.
504 kes Apply patch (with some difficulties) from Joao Henrique Freitas
505 <joaohf@gmail.com>, which adds support for libdbi as a Bacula
507 kes Add patch from Martin Schmid scm@apsag.com that checks to see if
508 ftruncate() actually works. In the case of some (cheap) NAS devices,
509 it does not, and so recycling NAS Volumes does not work. The code
510 simply unlink()s the file, then recreates it. This fixes bug #1011.
512 kes First incomplete cut of big malloc blocks for htable.
513 kes Tweak plugin code.
515 kes Plugin debug code + tweak a couple bat dialog layouts
517 kes Fix creating first JobMedia record during Migration to include
518 proper index. This caused slow restores of migrated jobs.
519 kes Temp fix to plugin name file_index.
520 kes Bacula backed up and restored a MySQL database.
522 kes Implement plugin restore.
523 kes Implement parsing of db_driver to give db_type index.
525 kes First cut of plugin restore code.
526 kes Fix bug #1047, which had a heap overrun when stripping certain paths,
527 and do not strip paths on symbolic links.
528 kes Set catalog backup database and user name from values specified on
529 the ./configure line.
530 ebl Fix #1031 about wrong pool source information in job report.
533 kes Remove a redundant jcr argument to find_files, match_files, and
535 kes Implement '.status dir header|scheduled|running|terminated' that
536 prints the requested status section. With the exception of the
537 header, the other reports have fields separated by tabs (\t).
539 kes Apply patch from Peter Much <pmc@citylink.dinoex.sub.org> that fixes
540 a resource embedded run command to find a since time if no explicit
541 since time was supplied on the command line.
542 kes Apply state-file.patch sent by Allan Black <Allan.Black@btconnect.com>
543 that updates the state file at job termination time in addition to
544 when the daemon terminates.
546 kes First version where a plugin did a backup.
547 bpipe-fd.so created a backup file, wrote a test
548 string to it, and Bacua could restore this fabricated file.
550 kes Implement DB Driver = string for the DBI driver.
551 kes Remove all old bdb_xxx.c code. Add dummy routines to bdb.c
552 kes First cut of code for loading Win32 plugin dlls. Implement
553 dlopen, dlsym, dlclose, and dlerror in src/win32/compat/compat.cpp
554 and implement a dlfcn.h file based on opengroup's definitions of
557 kes First cut plugin directives.
559 kes Apply patch from bug #1049 to prevent stripping the path on a
561 kes Attempt to fix bug #1047 where stripping a path corrupts the
562 heap. Waiting for feedback.
563 kes Correct the Mount message not to suggest labeling a new tape
564 when doing a restore. Submitted by email by John Stoffel.
565 kes Attempt to work around gcc FORTIFY_SOURCE bug that crashes the
566 FD by using casting. Reported in bug #1042.
568 kes A bit of crypto cleanup. More later.
570 Release Version 2.2.8
572 kes Apply patch from Martin to correct bug #1040, bscan sets existing
574 kes Fixed important spelling error in doc -- bug #1045.
576 ebl Fix bextract to be able to extract non-portable Win32 data to
578 kes Move initialization of read/write res lock earlier in the code.
579 This fixes the crash with a null conf file. This fixes bug
581 kes Redefine CURES in lib/parse_conf to be URES and move it all
582 into lib/parse_conf.c -- this responds to bug #1042, but does
583 not fix it. The fix is not to compile with FORTIFY_SOURCE.
584 kes Backport to 2.2.8 fix de-referencing a NULL pointer in the scanner from
585 the trunk SVN. I don't think this was reported as a bug.
587 ebl Fix a bug during tape initialization with MTSETDRVBUFFER.
589 kes Fix Win32 build with new .def files and DLL_IMP_EXP ...
591 kes Add DataDespooling and DataCommitting status (committing is
592 the last despooling).
593 kes Finish implementation of new reservations code noted below.
595 kes Fix bsnprintf for float point numbers. I broke recently when
596 parameterizing some variables. This fixes bug #1036.
597 kes Undo recent reservations changes ... will apply them later
598 when they work better.
600 ebl Fixes #1034 which cause mysql to hang the connection after 8h
601 ebl Change default statistics target of filename.name and path.path
602 fields for PostgreSQL. This speeds lookup by indexes. Thanks
604 kes A few more tweaks to new reservation code. Make sure to clear
605 vol released flag when retaking volume. When reading label and
606 label is bad mark volume unused. When recycling, mark volume
607 unused so it can be renamed.
609 kes Fix reserve_volume() so it doesn't release a volume in use
610 (i.e. a volume entry not marked released). This should be
611 the last part needed to fix bug #1018.
613 kes Move Heartbeat documentation from Job to Director resource.
614 This fixes bug #1033.
616 kes Fix existing switch drive SD code to call autochanger to release
617 any old volume. This must be done to keep the autochanger from
618 releasing subsequently newly reserved volumes in doing a close().
619 This should fix bug #1018.
620 kes Fail if attempting to get console input in batch mode. This
621 should help fail RunScript console commands that are incomplete.
622 kes First cut implementing switch_drive() in SD (not actually called).
624 kes Implement first cut running console commands in a RunScript.
626 ebl Fixes bug #1028 where 'Selection Type' option was not usable
628 ebl Fixes bug #897 and bug #1005 where bacula doesn't display runscript
631 Release Version 2.2.7
633 kes Add new free_tls() entry point so that Win32 builds.
634 kes Fix compile warning in src/lib/util.c
635 kes Fix entry point for edit_job_codes() so that Win32 builds.
636 kes Fix seg fault Frank Sweetser reports in regression testing
637 on his systems. The problem was that the original author of
638 bsnprintf.c did not take into account the side effects of
639 using ++x in the argument to a #define.
640 kes Make SD protocol backward compatible with version 2.2.x.
642 ebl Fixes bug #1015 where bacula failed to restore acl to a socket
643 because Bacula no longer restores sockets.
644 ebl Always use ignorecase fileset option on win32 FD.
646 kes Apply patch from Michael Stapelberg <michael@stapelberg.de>
647 that implements double quoting include names in conf files,
648 and also allows piping input by having the first character
649 be a vertical bar (|).
650 kes Apply patch from Bastian Friedrich <bastian.friedrich@collax.com>
651 that implement %f in RunScripts to pass the FileSet name.
652 kes Skip leading | when lex input comes from a pipe as suggested
653 by Michael Stapelberg <michael@stapelberg.de>.
655 kes Apply patch for bsmtp Win32 daylight savings time fix supplied by
656 Nerijus Baliunas <nerijus@users.sourceforge.net>
658 kes Implement Plugin Directory and plugin events.
660 kes Implement a security enhancement: TLS authentication but no
661 encryption. Enabled by setting 'TLS Authentication = yes'.
662 Note when this is on, TLS encryption is turned OFF!
664 kes This patch corrects a problem where the maximum concurrent storage
665 jobs counter gets out of sync during restore jobs causing jobs to
666 'wait on max Storage jobs'. This patch fixes bug #1009.
668 kes This patch fixes bcopy so that it produces correct Volumes.
670 kes This patch eliminates spurious output to the console during a VerifyVolume
671 job that contains encrypted data. It fixes bug #1024.
673 kes This patch prevents the 'status dir' command from trying to use a scratch
674 volume and possibly moving it from one pool to another. This patch fixes
677 kes Add new include to postgresql.c suggested by Marc Cousins so
678 that it compiles correctly with pgre version 8.3.
680 kes Fix --archivedir addition to configure. Replace it with
681 --with-archivedir in configure.in This fixes the regression
683 kes This patch fixes bug #1012 where the job is canceled because
684 of Max Run Time exceeded when the job has not yet started.
686 ebl Apply Richard Mortimer patch that fixes #1016 when there are more than
687 one 'part' to write. Instead of each part being stored on disk,
688 written to DVD, then deleted from disk, all parts are written to disk,
689 and only the last is written and deleted from disk.
690 kes This patch fixes the status command to include the formating string for
691 JS_AttrInsterting. It fixes bug #1021.
692 kes This patch should fix the Mac OS X build problem on the latest
693 Darwin, where sys/types.h was not included correctly (apparently
694 due to a change in the Mac headers). The solution was to explicitly
695 ensure that it is defined for the ./configure.
696 This patch also has a rebuild of configure that includes the Debian
697 qt4 patch to check for qmake-qt4. This patch fixes bug #1020.
698 kes This patch should ensure that queued messages to the console are
699 displayed as soon as possible. It should fix bug 1007, but has been
700 reported not to work.
702 kes This patch fixes the infinite loop when trying to increase the
703 maximum number of volumes in a Pool during the add command.
704 This patch fixes bug #1008.
706 Release Version 2.2.6
708 db Remove extra data on estimate command in joblist for bat.
710 kes Cleanup of code in SD that sets the LastWritten date. This doesn't
711 really change anything, but is the beginning of doing it *right*.
712 To do it completely right the LastWritten date must be passed to
713 the SD, but it is not yet done.
714 kes Minor tweaks to some bat restore SQL.
715 kes This patch fixes bug #1003 where putting the message output from
716 a Verify job into the catalog results in a recursive loop. The problem
717 seems to show up only with postgresql (to be verified).
718 kes Correct %x to %p in postgresql debug statement.
720 kes Fix bug #942 where lots of emails where generated when the heartbeat
721 interval was low and Bacula wanted a different tape from the one in
724 ebl Add new SD despooling attributes and Dir inserting attributes
725 job status codes in the catalog (Status table).
727 ebl Use qmake-qt4 instead of qmake when available (debian system).
729 kes Add a security warning to src/cats/make_catalog_backup.in indicating
730 that passing the password via the command line (arg 3) is insecure.
731 This responds to bug #990 (it doesn't fix it).
733 kes Set default debug_level to zero. This corrects bugs #991 and #993.
734 kes Fix a crash in bat when it cannot connect to the Director for example
735 if the Director is not running.
736 kes Remove redundant INDEX (JobId) from File table in the trunk.
738 kes Make explicit exception to GPL in LICENSE to permit linking
739 the Win32 FD with Microsoft VSS code.
740 kes Apply the Solaris package patch from
741 Masopust, Christian <christian.masopust@siemens.com>
742 kes Apply the patch to optionally add a timestamp in the debug output
743 submitted by Mariusz Czulada <manieq@wp.eu>.
745 ebl Use PQerrorMessage instead of PQresultErrorMessage in postgresql
746 backend (sql_strerror). Fixes bug #989
748 kes Apply Michael Short's <mdshort@gmail.com> Win32 regress patch.
749 It applied with no problems.
750 kes Add PATH command to SunOS part of mtx-changer.in so that sed and
752 kes Redirect stderror to stdin on mt status command in mtx-changer.in
753 since the status is returned on stderr on Solaris.
754 kes Activate Close button on tray-monitor window. This fixes
756 kes Check for NULL item in parse_conf.c before calling it. In the
757 case of Device, there is no item and this caused a seg fault when
758 Device appears in the conf file.
759 kes Add a #define __CONFIG_H when including config.h in bacula.h. This
760 avoids pulling in config.h multiple times in some new code.
762 kes Fix spurious warning message printed when creating a volume with
763 a LabelFormat. This fixes bug #976.
765 Release Version 2.2.5
767 kes Add JobId in place of Job name in all the Jmsg() output.
768 kes Correct the APP_DESC for the Win32 storage service (remove an e).
770 kes Make maxvol-test and new more strict maxvol2-test work.
771 kes Print JobId in all Jmsg() job output.
773 kes Add new SD despooling attributes and Dir inserting attributes
774 job status codes. This fixes bug 961.
775 kes Fix Win32 drive display in bat version browser. Fixes bug #962.
777 kes Fix doc issue. This fixes bug #963.
778 kes Fix listing performance problems in bat. Pointed out by
780 kes Remove old debug code.
781 kes Fix bat code that tests for Win32. This should fix bug #968
782 kes Query 5 list wrong Vol after migration. This fixes bug #960
784 ebl Fix #969 where user can't change Replace option in restore menu.
786 kes Save jcr in thread specific data (tsd) for each thread.
787 kes Make Dmsg() print JobId as -%u.
788 kes Make Jmsg, Emsg, and others automatically pickup the jobid
789 for the thread if it exists.
790 kes Remove old reservation debug jid code.
791 kes Remove get_jcr_from_tid() from OpenSSL and tls code.
792 ebl Add an option that permit to specify spool size in job
793 definition. (Applying patches/testing/spoolsize_per_job.patch).
794 You must upgrade SD and DIR at the same time.
795 dvl Add new configuration item --archivedir
796 dvl Adjust regression tests to use tmp not /tmp. This will allow
797 multiple concurrent runs of the regression tests.
799 kes Fix race condition that drops final block written to volume.
800 This happens in rare cases with multiple simultaneous jobs
801 when the Volume fills. This fixes bug #964. May be related
802 to bug #935 and possibly #903.
803 kes Eliminate more strerror() and replace with bstrerror().
804 kes Remove BSD getopt and replace with unrestricted IBM version.
805 kes Fix Win32 build for changed calling sequences.
806 kes More tweaks to the mount volume routines to get everything
807 right. Changed variable name from find to have_vol, which is
808 much easier to understand.
809 kes Enhance btimer debug code.
811 kes Fix FD->SD authorization failure, which was due to spurious
812 wakeups from a pthread_cond_timedwait(). Simply check the
813 predicate before continuing. This fixes bug #953.
814 kes Add const char where needed (more to do). Remove temp debug code.
816 kes Setup SQLite busy handler before doing queries. Fixes bug #967.
817 kes Don't overwrite error message in check_tables_version.
819 kes Unlock batch insert tables with same calls used elsewhere.
820 kes Allow starting 59 jobs a second.
821 kes Make SD session key more random.
822 kes Add retry for SQLite opening db if it fails. Probably helps
824 kes Suppress extra error messages during batch insert failure.
826 kes Add jcr to timer packets so if killed message can be sent to job.
827 kes Add JobId to all Dmsg() output.
828 kes Put some FD auth code on dbglvl rather than fixed.
829 kes Return insert attributes error message in db msg buffer to avoid
830 false error messages. Helps fix bug #966.
831 kes Separate batch init error messages. Probably helps fix bug #966.
832 kes Make SD code that contructs attribute insert check string lengths
834 kes If Dir gets an error during inserting attributes, cancel SD.
835 This reduces unnecessary error messages.
837 kes Correct search boolean for getting Volume info
838 ebl Cleanup batch insert code. Probably fixes bug #965.
839 kes Back out one small change to the reservation system (reserving a volume).
840 kes Rework how a Volume is mounted. It is now much more intelligent and
841 will always attempt to use any mounted volume if possible and reduces
842 calls to the Director asking about volumes.
844 kes Turn off some code when batch insert not enabled.
845 kes Edit FD name in connect error messages.
846 kes Rework the reservation system to take into account that the Director
847 might give us a Volume that is different from the current one being
848 used, and to ensure that we don't exceed Maximum Volume Jobs.
849 This fixes (mostly) bug #947 ' Maximum Volume Jobs = 1 produces
850 fatal error with multiple jobs running'
851 kes Add more debug code in reservation system.
852 kes Implement maxvol-test to check bug #947.
854 kes Add code to handle tray monitor separated from Win32 FD.
855 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
857 kes Add missed return in fixing verify bug -- trunk only.
858 ebl Fix a command parser issue causing a director segfault.
859 kes Fix ANSI tape labeling. Fix restoring ANSI labeled Volumes.
861 kes Increase the max block size to 4MB fixes bug #957.
862 kes ERABT if user sets min block size > max block size. Fixes bug #956.
863 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
864 is not properly mounted (recognized) during a poll.
865 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
866 Job that has differences reports Verify OK.
867 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
869 ebl Add an option to operate on all pools with update vol parameters.
870 This complete the project 20. Patch from Nigel Stepp.
871 ebl Add history support to bconsole when using readline.
872 Using Ctrl-D to exit doesn't update .bconsole_history
873 kes Modify new volume algorithm to use max MediaId for generating next
874 volume number rather than the count of Volumes. This should essentially
875 eliminate the failure rate if some volumes were deleted. Bug #921.
876 kes Begin implemention of Optimize Job Scheduling.
877 kes Implement restore callback that Dirk and I agreed on for bat
878 restore. This fixes bug #928. Restore of backup of zero files fails.
879 kes Fix SQL Catalog logging which broke with new db_escape_string
882 Release Version 2.2.4
884 kes Fix bacula_cats.def for new db_escape_string().
885 kes Increase size of name string when FD making connection to SD.
886 May fix bug #953. FD->SD connection failure.
888 kes Add code to help Dan debug 2drive-incremental-2disk test.
889 kes Add code to try to fix bug #908.
890 kes Add waits to multiple exit detection code to try to force pid
891 file to always be deleted.
892 kes Restore good dev.tar.gz to rescue set appropriate binary property.
894 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
895 trying to switch drives by checking for blocking before unblocking.
897 kes Cancel storage daemon in all cases where FD reports error. This
898 should fix virtually all cases of bug #920.
899 kes Fix db_escape_string() for MySQL which did not compile.
901 kes Fix error message that was clobbered when Dir tells SD it does not
902 have write permission on Volume. This should fix a minor point
903 in bug #942, but not the main problem.
904 kes Add code to cancel job in SD if FD connection fails. This should
906 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
907 dvl Pass jcr and db into db_escape_string() to enable better escaping
909 kes Fix migration code to get correct Volume name with multiple volumes
910 by skipping |. Fixes bug #936.
911 kes Implement patch supplied by Landon to fix bug #944 where using
912 TLS with bconsole uses 99+% of the CPU.
913 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
915 kes Move patches into patches directory.
917 ebl Fix bug #946 about 'bacula-dir -t' which doesn't works
920 ebl Using 'm' in bconsole will show messages like before,
921 and not memory usage.
922 kes Fix bug #935, and probably also bug #903 where files were not
923 restored. MediaId was not properly set in JobMedia record after
926 kes Suppress chown and chmod error messages if the FD is not running
929 kes Apply Martin Simmons' patch that should turn off the new API usage
930 when batch insert is turned off allowing building on older
932 kes Add ./configure search in qwt-qt4 for qwt package
934 kes Bacula is now free of 3rd party GPL copyrighted code!
936 kes Add guid_to_name.c/h which replace idcache.
937 kes Remove enh_fnmatch.c. Make code that references it use fnmatch.c
939 ebl Detect if new PosgreSQL batch insert API is present.
940 kes Correct incorrect mempool call causing Director crash. Occurs on
941 systems without va_copy().
942 sb Update spec files for 2.2.1 release
944 kes Fix memory pool call in ua_output.c. bug #934.
945 kes Replace fnmatch.c and fnmatch.h by modified BSD versions.
946 Add test program to fnmatch.c
948 kes Integrate patch to README.vc8 from
949 Hederer Jean-Sébastien <hedererjs@asperience.fr, had to manually
950 edit it to get it into Unix patch format.
951 kes Implement mkpath.c to replace old FSF makepath.c
953 kes Implement savecwd.h and savecwd.c. Remove FSF versions.
955 Release Version 2.2.1
957 kes Update POTFILES.in
958 kes Cleanup a few underquoted AC_DEFUNs in configure
959 kes Apply patch from Martin Simmons that adds a test for va_copy to
962 kes Fix bug #921 by increasing the number of tries to create a new volume
964 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
965 can be called multiple times. Implement a version for machines
966 without va_copy() that gets a big buffer.
968 kes Integrate more portable zone offset code into bsmtp.c
969 Submitted by Attila Fülöp.
971 kes Fix bad SD->FD return status reported by
972 (James Harper) <james.harper@bendigoit.com.au>
973 ebl Fix a bug in read_close_session which return random status
974 thanks to James Harper
976 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
977 and directory names during restore of single file/directories.
978 kes Add sanity checks to .sql command when string is empty. Hopefully
979 that will resolve Dirks Director crash.
981 kes Apply patch submitted by Martin Simmons that corrects a seg fault
982 in the bsmtp chat subroutine when debug is >= 10.
984 kes Fix Director crash when running bat SQL queries.
985 kes Add David's notes on Item 8: Copy pools.
987 kes Rework projects file to be current and ready for a vote.
988 kes Enhance lex scanner error message.
990 kes Tweak LICENSE file to mention BSD code.
991 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
992 if specified on the ./configure.
993 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
994 This class is intended to allow us to open a second bsock to the
995 Director while in the restore subdialog.
997 kes Fix configure to create bat Makefile before creating dependencies.
998 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
999 kes Add a tooltip to the tray monitor.
1000 dvl Set the Director's PID file before dropping privs. This fixes
1003 kes Update AUTHORs file
1004 kes Increase the default max concurrent jobs to 20 in FD and SD to
1005 correspond with the default .conf files.
1006 kes Rewrite the Win32 service routines. This eliminates the 3 copies
1007 some different, of the same file created by RN when porting the
1009 kes Rearrange some of the Win32 directories and the placement of the files
1011 kes Set DEVELOPER flag in version.h
1013 ========================================================================
1014 Release Version 2.2.0
1016 kes Apply a second doc patch from Marc.
1017 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
1018 improves the tips section that discusses how to setup multiple
1021 kes Update bat README file.
1022 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
1023 corrects a typo in the Recycle status check in db_find_next_volume().
1024 This will probably fix a number of annoying problems with multiple
1026 kes Modify most of dird/msgchan.c to use bsock class calls rather than
1027 bnet calls -- no functionality change.
1029 kes Modify the Verify output to specify if files are missing on
1030 the Volume(s) or disk. Fixes confusion in bug #916.
1031 kes When more than one Volume is read in a migration job, the last
1032 Volume bytes reported are from the last read volume rather than
1033 the last written volume. Fixed. This fixes bug #910.
1034 kes Fix display of Recycle flag after update volume=foo recycle=yes.
1035 It previously printed New Recyle flag is: no. This fixes bug
1038 kes Correct seg fault when switching tape drives during restore.
1039 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
1040 be used until after 2.2.0 release.
1042 kes Remove fnmatch() in SD that permitted wild card specifications.
1043 This fixes bug #914.
1045 kes Fix %g in filename returned by SQL for browse tree reported by
1047 kes Fix configure so that it puts config.out in the cwd rather than
1049 kes Attempt to fix the locking problem reported by Eric in bug #906.
1050 kes Make berrno class to leave errno unchanged after constructor call.
1051 kes Make bnet_server use the heap rather than the stack to allocate
1052 its socket fd pointers to avoid a crash at termination. Problem
1053 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
1055 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
1056 and putting it in depkgs-qt along with Qt4.3.
1058 kes Rework code in acquire.c that switches drives for reading when
1059 the Media Type does not match. This should fix bug #906
1061 ebl Fix a director segfault during job setup #907
1062 kes Correct seg fault in postgresql when first operation returns no
1063 rows. Fixes Dirks File browser problem seg fault with bat.
1065 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
1066 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
1069 kes Implement PopUp YES/NO dialog for bat.
1071 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
1073 kes Correct RunScript to terminate job in FD on failure.
1074 kes Change abort_on_error and AbortJobOnError to fail_on_error
1075 and FailJobOnError in RunScripts.
1076 kes Minor tweaks of code formating in RunScripts, principally to
1077 avoid depassing 80 columns.
1079 kes Eliminate one #ifdef Win32 in bsmtp
1080 kes Implement grow tool to grow a file for testing very large databases.
1081 kes Add big-vol-test to test Bacula seeking with > 5GB.
1084 kes Modify find_next_volume() to return all values in Media record.
1085 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
1089 kes Update Release notes
1091 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
1092 Warning, in previous beta version, all media get from scratch keep their
1095 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
1096 This should fix bug #842. Made a note to look at removing the temp
1097 files at the end of the install.
1098 kes Add ability to mount and unmount a file device providing it is
1099 marked as being removable and has the appropriate mount and unmount
1100 commands defined in the Device resource. This fixes bug #830.
1101 kes When applying a storage override, release all previous storage
1102 definitions rather than just prepending the new storage.
1103 This should prevent a good deal of confusion.
1105 kes Implement ./configure search for qwt libraries.
1107 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
1108 Win32 FD. This should fix bug #893.
1109 kes Remove an unnecessary beep in Win32 init code.
1110 kes Update copyright dates in Win32 executable about boxes.
1111 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
1112 code with a BSD getopt.c and getopt.h.
1113 kes Remove sched.h from the Win32 compat directory -- not used.
1114 kes Remove the Exit menu item from the Win32 tray monitor. If you really
1115 need to shut it down, do it through the services panel or the command
1117 kes Remove some inappropriate Bacula FSFE copyrights.
1118 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
1119 kes Fix regress config non-portable test as pointed out by
1120 Florian Heigl <florian.heigl@gmail.com>
1121 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
1122 as pointed out by Florian Heigl <florian.heigl@gmail.com>
1124 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
1125 Reported by Frank Sweetser.
1129 kes Fix client-only build.
1130 kes Integrate client-only fixes for bsys (initgroups) and conio from
1131 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
1132 kes Make arguments to get_scratch_volume() in same order as other
1134 kes Rework the prune_volumes() subroutine so that after purging and
1135 no volume found in desired pool, it will check for a scratch
1136 volume. This prevents recycling the whole scratch pool.
1137 kes Add code to status storage to print boffset_t (largefile support).
1139 kes Move qwt (Graphics libarary for Qt4) to depkgs.
1140 kes You now need a --with-qwt=<dir> to be able to build bat.
1141 kes Update src/win32/cats/bacula_cats.def to include the new
1142 db_get_query_dbids() call on Win32.
1144 kes Correct a problem when selecting a scratch volume and moving
1145 it to another pool that lost some columns.
1146 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
1147 kes Enhance Autochanger error messages to include Volume and device name.
1148 kes Rework prune_volumes() code to take account of InChanger flag,
1149 and to handle recycling volumes going to the Scratch pool and
1150 current pool because the RecyclePool directive.
1151 kes Implement a better and more efficient db_get_query_dbids() to
1152 handle creating and passing back a list of DBIds.
1156 kes Start work on new more efficient DBId subroutine. First use
1157 will be for recycling volume to Scratch inchanger.
1158 kes Increase number of JobIds in pruning from 1000 to 10000.
1159 This to be replaced by above routine.
1160 kes Begin implementation of building Qt4 on Win32.
1161 kes Correct typo in fix I added for bad TLS shutdown.
1162 kes Pull 2.0.3 patches into patches directory.
1163 kes Update Release notes. Include qt-console in line count.
1164 kes Update Projects file.
1166 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
1167 bug in migration code where a job that spanned two volumes
1170 kes Implement new BST_DESPOOLING blocked state. Change from locking
1171 during despooling in SD to blocking. This means that other threads
1172 can work with the device structure, in particular the reservations
1173 system while despooling.
1175 kes Fix return in reservation message queue that missed clearing
1176 the jcr lock (implemented 26Jun07 below).
1177 kes Rename a number of dev methods to make locking function names
1179 kes Document locking in lock.c. Move lock structures to new file
1182 kes Move reservations message lock to lock jcr only this
1184 kes Move main SD locking code into lock.c (new file).
1185 kes Update Win32 build to include lock.c
1189 kes Dirk committed the qwt library code for drawing graphs in bat.
1190 kes Tweak install of qwt so that it is integrated with ./configure.
1192 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
1193 out by Eric (my typo).
1194 ebl Fix configure.in to get batch mode enable
1195 kes Return correct string from authenticate.cpp in bat when connecting
1197 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
1198 spurious line drops when using TLS.
1199 kes Do not file reparse points when restoring a file that already
1202 kes Implement Windows reparse points -- similar to directories, but
1203 we do not descend into it. This is a first cut. They seem to
1204 be backed up, but restore is not yet tested.
1205 kes Remove restore_blocking in tls code when shutting a socket to leave
1206 it in blocking mode. Hopefully this will fix the encryption bug
1207 reported by Frank Sweetser.
1208 kes When opening a file for backup, tell the OS that we are going to
1209 read it sequentially -- optimization.
1210 kes Change variable names in authenticate_director() to not conflict
1211 with member names in bat. Caused great confusion with compiler,
1214 kes Queue openssl error messages in case of comm problem.
1215 kes Do shutdown() call if socket terminated.
1216 kes Remove some duplicated code in tls.c
1217 kes Move more of the bsock member variables into private and access
1219 kes Add Frank Sweetser's tls-test to the regression suite.
1221 kes Add Swedish sv.po file
1223 kes Don't print clock skew message in FD if less than 3 seconds diff.
1224 kes Add a bit of VSS info to status client.
1225 kes Implement a first cut of Vista VSS, using Win2003 code.
1227 Release: 2.1.20 beta
1229 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
1230 loaded tape but uses first drive).
1231 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
1232 This was indeed a Win32 issue.
1234 kes Simplify search of autochanger for in-use Volume.
1235 kes Fix exit condition of check for in-use volume. kes Remove
1236 inappropriate my_postgresql_free_result() in db_close()
1238 kes Fix bad return in FD when encryption signature not found.
1239 Probably caused a crash.
1240 kes Inhibit missing encryption signature error messages for
1241 file types where no signature computed.
1242 kes Correct inverted check on autochanger in reservation system.
1243 kes Tweak debug code in autochanger reservation.
1245 kes Add some additional locking in the cats directory in subroutines
1246 that modify packet variables called from batch insert.
1247 kes Rework how dcrs are allocated. new_dcr() can now be called
1248 with an existing pointer, and it will simply clean it up.
1249 This allows the reservation system to test various different
1250 devices, and will permit easy device changes.
1251 kes A bunch of changes all over to handle new new_dcr() calling
1253 kes Work more on the Volume management in the SD. Remember Volumes
1254 for tape drives and for autochangers (even virtual disk changers).
1255 kes When looking at the Volume list to reserve a drive, handle
1256 autochanger names correctly by interating through the changer
1257 devices. Also call the Director to see if a Volume is suitable
1258 for the current job.
1259 kes Fix some bugs in bscan. Make sure all media records are written.
1260 Make sure that valid JobMedia records are written for disk files.
1261 Previously they were completely wrong.
1262 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
1263 that the URLs don't change and so that the developers will all
1264 work off the same copy. Rebuild from scrach.
1265 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
1267 Release: 2.1.18 beta
1269 kes Fix seg fault in FD from incorrect digest size.
1270 kes Fix argument to non-OpenSSL crypto.c subroutine.
1272 Release: 2.1.16 beta
1274 kes Remove a few malloc()s from the encryption code.
1275 kes Use the class calls to bsock in filed/backup.c and restore.c in
1276 place of the old bnet_xxx code.
1277 kes Implement code that does an on the fly calculation of the
1278 signing digest during restore of encrypted files. It makes
1279 a best guess at the algorithm, and if it is not correct, will
1280 then revert to the old code which reads the file after it is
1282 kes Implement at least one missing crypto stream in stream_to_ascii()
1283 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
1284 #877 where a reload with bad syntax causes Dir to exit.
1286 Cut: 2.1.14 beta (not released)
1288 kes Do not free a volume on a tape drive until another volume is
1289 mounted and read, or the autochanger unloads the volume.
1290 This should help the SD re-use volumes that are already mounted,
1291 and should fix bug #886.
1292 kes Apply patch from user brettedgar that allows gnome2-console include
1293 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
1294 kes Apply patch from Lucien Weller that fixes day of week calculation
1295 because of DST flag problem. Fixes bug #887.
1297 kes Move find_next_appendable_volume() to after acquiring a valid device
1298 in reserve.c. This fixes bug #864 -- confirmed by reporter.
1300 kes Unable to reproduce bug 872. However added additional testing for
1302 kes Bug #874 resolved by documenting SQLite limitations.
1303 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
1304 kes Bug #881 resolved by removing typo in mtx-changer script.
1305 kes Made Frank Sweetser's wiki the official Bacula wiki with his
1306 approval. Added a link to the wiki on the web page, and implemented
1307 a backup from http://paramount.ind.wpi.edu
1309 kes Fix update allfrompool to pass pool name.
1311 kes Convert to pure GPL v2 license.
1312 kes Fix sscanf problems reported by Peter Buschman that caused
1313 a bus error on Solaris.
1314 kes Rework (simplify) the select prompt in bat.
1315 kes Move get_jobid_from_tid() into lib and create a
1317 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
1318 should definitely fix the problem of lost error messages in the
1320 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
1321 kes Eliminate tcpd.h from the project. Enclose the #include from the
1322 library with extern C ...
1323 kes Add print of signal name when a signal is trapped.
1325 Release: 2.1.12 beta
1327 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
1329 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
1330 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
1331 makes SQLit3 run 30 times faster, though a bit less safe.
1332 kes Implement --with-batch-insert in configure and detection of thread
1333 safe libraries. It is on by default, but turned off if no thread
1334 safe library (e.g. SQLite 2) is available.
1336 kes Fix Bacula PostgreSQL buffer overruns.
1337 kes Do better checking for NULL results returned from PostgreSQL;
1338 implement retry for failed queries; clear results buffer after
1339 failed query. Hopefully this will correct the PostgreSQL failures.
1341 kes Implement algorithm to handle only one appendable volume with
1342 Prefer Mounted Volumes = no.
1343 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
1344 returned from a query.
1345 kes Make volume lock recursive.
1346 kes Implement an additional volume reservation algorithm that
1347 starts by considering all reserved volumes then uses the
1348 old brute force algorithm of searching the resources to
1349 find a suitable device.
1350 kes Add new reservations debug code and refine the old code.
1351 kes Update the win32/dll/bacula.defs file.
1353 kes Tweak reservations algorithm to permit a few more cases, i.e.
1354 volume reserved, but on different drive, ...
1355 kes Enhance SD status to include Pool and Media Type for drive in a
1356 more readable format (a bit longer).
1357 kes Fix PostgreSQL double free.
1359 kes Minor refactoring of restore decryption code.
1360 kes Add code to smartall.c to detect double free of a buffer.
1362 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
1363 so that bsmtp will create a correct email address (mailbox only).
1364 kes Modify 'memory' command so that the buffers are listed as 'In use'
1365 to avoid confusion with Orphaned buffers.
1366 kes I reworked the OpenSSL include/lib flags to be handled in
1367 the standard Bacula way, which should fix bug #863 concerning
1368 non-standard OpenSSL libraries.
1370 kes Implement Help Browser window for bat.
1371 kes Fix reload bug that reset StorageId to zero.
1373 kes Fix TLS #ifdefing when TLS turned off.
1374 kes Ensure that when labelling a tape with Slot=0 that InChanger
1376 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
1378 kes Add StartTime to final uar_sel_jobid_temp query so that we can
1379 add DISTINCT (required by PostgreSQL).
1380 kes Implement BSOCK authenticate_director() method. Eventually will
1381 authenicate all daemons.
1382 kes Move several more functions into the BSOCK class.
1384 kes Add code to tell the OS that we no longer need a cached
1385 file that we were reading. In findlib/bfile.c. Also,
1386 only cache files that we are reading. Thanks to
1387 Tobias Oetiker <tobi@oetiker.ch> for the idea.
1388 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
1389 kes Implement script to automatically generate cats and dll .def
1390 files for Win32 dll.
1391 kes Update README.mingw32 to include new .def file generation.
1392 kes Correct typo in UTF-8 error message as reported by:
1393 jhernandez <julianhernandez@gmail.com>
1394 kes Add additional sm_check() code on debug level 1.
1395 kes Set default debug level to 1.
1396 kes Trap SIGABRT in attempt to get traceback.
1398 kes Reduce bat connect timeout from 30 to 15 seconds.
1399 kes More restructuring and implementing BSOCK class in place of
1401 kes Remove a few unnecessary malloc() tests in crypto code.
1402 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
1403 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
1404 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
1406 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
1408 kes Fix Verify InitCatalog. The attributes were not pointing to the
1409 correct saved location.
1410 kes Implement message callback so that GUI is sure to get all
1411 daemon messages. Currently displayed in a dialog in bat.
1412 kes Ignore SIGUSR2 (Bacula timer) in bat.
1413 kes Apply regress patch from bug #859 to allow regress to work
1414 with Solaris compiler.
1416 kes Begin adding TLS support to bat.
1417 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
1418 clean up lex.c and make it more readable.
1420 kes Move more bnet functions into the BSOCK class.
1421 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
1422 kes Complete change of berrno strerror() method to bstrerror()
1424 Release: 2.1.10 beta
1426 kes Cleanup incorrect email addresses in bsmtp.
1427 kes Make bat display initial messages rather than discard them.
1429 kes First cut of adding .mod to the run command.
1430 kes Implement auto display of messages in bat.
1431 kes Enhanced preferences to allow all Bacula output to be
1434 kes Try to make bsmtp date routines more generic.
1435 kes Fixed bug #856 autochanger documentation.
1436 kes Rework bsmtp date editing for Win32. This fixes bug #854.
1437 kes Add new cats entry point so Win32 builds.
1439 kes Attempt to fix bsmtp date editing on OSes without %z editing.
1441 kes Do better checking for the MySQL 64 bit libraries looking for both
1442 .a and .so libraries.
1443 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
1444 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
1445 kes Require the thread safe version of MySQL during configure. Thanks
1446 to Andre Noll for pointing this out.
1447 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
1448 continuing in migration code.
1449 kes Apply implementation of tray-monitor font derived from gnome-console
1450 submitted by Andreas Piesk <a.piesk@gmx.net>
1452 kes Eliminate important memory loss in SQLite
1453 kes Fixed the batch insert MySQL thread specific data that was not
1454 being freed. See cats/mysql.c:db_thread_cleanup().
1455 kes Fix restore before command.
1456 kes Convert old hdr.name to name() in a few places.
1457 kes Implement update jobid command.
1458 kes Return all time_t dates in db_get_job_record()
1459 kes Stop watchdog in SD earlier.
1460 kes Put Pool just after Storage in please mount message.
1461 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
1464 kes Update the po files.
1465 kes Fix Verify InitCatalog by making it cache attributes.
1467 kes Change name bacula-bat to bat for man 1 page to correspond to
1469 kes Check for client and store NULL pointers in status command. This
1471 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
1472 kes Fix sign extended editing of %p.
1473 kes Clean out a little old #ifdefing in cats/mysql.c
1475 kes If time diff between DIR and FD is more than 600 seconds convert
1476 INFO message to WARNING.
1477 kes Implement heap size display in status for all daemons.
1478 kes Attempt to fix MySQL db open memory loss (not successfull).
1479 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
1480 kes Eliminate memory loss in MySQL (possibly other SQLs) during
1481 Query. This looks like a MySQL but but by doing extra releases,
1482 the memory goes away. This should fix bug #847.
1484 kes When backup fails, cancel SD before waiting for sd termination.
1485 kes If SD is waiting for FD to connect during cancel, wake up the
1487 kes Fix fsf code so that errno is correctly reported.
1488 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
1490 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
1491 so that Bacula doesn't later stumble into a seg fault.
1492 kes Use the term Restore Client in the restore Job report.
1493 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
1494 the original job's FileSetId.
1495 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
1496 spooling in migration jobs. Not yet tested.
1497 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
1498 reading conf file from a pipe. However, do it with open_bpipe()
1499 rather than popen. Not yet tested.
1501 kes Fix an ugly bug where the VolCatBytes were getting updated
1503 kes Implement bconsole memory command that prints current memory
1504 usage, plus smartalloc dump.
1505 kes Clarify some error messages in backup, admin, and migrate.
1506 kes Shrink label dialog to smaller size.
1507 kes Invert Cancel OK buttons on restore to be OK Cancel.
1508 kes More strerror() to bstrerror() conversions.
1510 kes Start implementing bstrerror() in place of strerror().
1511 kes Stripping path -- seems to work.
1513 kes Prevent door and port files from being restored (mostly
1515 kes Free an unreleased buffer in compat code.
1516 kes Change console Job name from *Console* to -Console- to eliminate
1517 Win32 filename problems. Put Win32 path separator when creating
1518 Console file. This fixes bug #846.
1519 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
1521 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
1523 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
1524 to force Win32 error message.
1526 kes First cut strip path. The data should be passed to the FD,
1527 but nothing is done with it yet.
1528 kes Enhance the digest and signature routines in the crypto
1529 library to accept a JCR and to use it to print error messages
1530 so that they will go in the Job report rather than the daemon's
1532 kes Simplify some of the verify signature code.
1533 kes Simplify a few of the alternative returns in the signature
1536 ebl Use only POSIX regex instead of GNU regex in breg.c for
1537 File relocation. It fix broken freebsd compilation.
1538 kes Convert all other Dir files to use new ua class message
1540 kes Tentative fix for missing digest signature in bug 807.
1541 kes Correct handle problem in new win32_ftruncate routine.
1542 kes Convert ua_purge.c and ua_update.c to use new ua class
1543 message routines for bat.
1545 kes Correct incorrect installation of LICENSE in Win32 installer.
1546 kes Display LICENSE at the beginning of the Win32 install.
1547 kes Attempt to correct the need for the png files to be installed
1549 kes Reapply my bat.conf install script in qt-console. I think I
1550 editted bat.pro instead of bat.pro.in and it was lost.
1551 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
1552 the /var/lock/subsys for subsysdir. Also corrects typos in the
1555 kes First cut update job.
1556 kes Correct configure to include qmake of src/qt-console directory.
1558 kes Make restore job yes/mod/no print in one command so GUI works.
1559 kes First cut implementing backup and restore client.
1560 kes Correct editing in Verify output that caused a seg fault.
1562 kes Insure that bat.conf is not overwritten during installation.
1563 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
1564 while I was implementing migration in March 2006 !
1566 ebl Cleanup file relocation, using char *RegexWhere instead of
1567 char *where + bool where_use_regexp
1568 kes Update some manpages and add bat manpage.
1569 kes Make a first cut at converting bacula.spec.in for bwx-console
1571 kes Apply patch from John Goerzen to add hostname as fourth argument
1572 to make_catalog_backup script.
1573 kes Fix typos I introduced into bsmtp.c
1574 kes Make pm_strxxx() routines handle input of NULL pointer. This
1575 is to protect from NULL pointers returned from SQL databases.
1576 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
1577 kes Add more debug to FIFO code -- fix fifo regression test.
1579 kes Implement posix_fadvise in FD, and for reading spool files in SD.
1580 kes Add thread timer to bnet_connect() to break from OS if wait time
1583 kes Update Win32 build to include new files, new symbols, and
1585 kes Implement socket level heartbeat (tcp_keepidle)
1586 ebl Commit File relocation patch
1587 kes Make bat have 'make install' target.
1588 kes Warn during install if old gnome-console binary found.
1589 kes Warn during install if old wx-console binary found.
1590 kes Add -8 option to bsmtp command line to add content type utf-8.
1591 Fixes bug #809. (Character coding problem in bsmtp).
1592 kes If < is found in target (from, to, cc) then do not enclose the
1593 target in < > in bsmtp. Fixes bug #772 (malformed address).
1594 kes When printing certain items in dbcheck, stop after 300000.
1595 Fixes bug #822. (dbcheck loops).
1596 kes Incorrect status in Dir after waiting for mount with poll set.
1599 kes Extend idea of Prefer Mounted Volumes to mean a volume about
1601 kes Print waiting to reserve a device every 5 mins.
1603 kes Don't call close_part in label.c if tape and relabel.
1604 kes Don't free volume if busy in close() -- should help with
1606 ebl Fix #824 RunScript bug (After script could be execute twice)
1607 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
1608 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
1609 Add a regression script to test RunScript
1611 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
1614 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
1615 deprecated. No additional bugs will be fixed, and they will be dropped
1616 in a future release (probably 2.4.0).
1617 kes Change name of wx-console to bwx-console to make it more Bacula
1619 kes Change the name of gnome-console to bgnome-console to make it
1622 kes Some time in March, a Feature Request with patch from Jorj Bauer
1623 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
1625 The ability for the director to validate a Client (FD) CN against
1626 an arbitrary set of patterns rather than the hostname, with
1627 A new 'TLS Allowed CN' set of directives which are implemented
1628 in the Client resource. Then pattern matching is used in place
1629 of hostname matching against the Certificate's CN. As an example, we
1630 have certificates which (a) use a local CA, and (b) have a CN of the
1632 kes Add new/changed entry points to Win32 build
1633 kes Create unaccepted-projects for projects that are not accepted.
1634 kes Simplify locking in the reservations system.
1635 kes Add more debug code in reservations.
1636 kes Make sure error condition on reserving a volume is handled correctly.
1637 kes Correct handling of volume_in_use.
1638 kes Correct handling of initializing a device.
1639 kes Move handling of broadcasting releasing a device into release_device().
1640 kes Correct attaching dcr to dev so that it is only done if device
1641 is properly initiated.
1643 kes Locking debug level tweaks in SD.
1644 kes Tweak new Volume code.
1646 kes Add exec external-command [wait-seconds] to bconsole. This
1647 executes the external-command. Note! normally external-command
1648 should be enclosed in double quotes.
1649 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
1650 it should normally be off in a production system.
1652 kes Implement die command for SD so that we can force it to dump.
1653 kes Implement SD lock debug code.
1654 kes Implement new algorithm for keeping Volume list in SD. It
1655 is now owned by the device.
1657 kes Implement new code for freeing in use volumes that should
1658 resolve if not all, some of the problems of multiple drive
1659 tape conflicts described in bug 801.
1661 kes Fix gui/bacula-web/images files in svn.
1662 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
1664 ebl Fix a bug in batch mode (in string escape)
1665 kes Correct migration prune SQL typo that crept in in a
1666 recent 2.1.x change.
1668 kes Move bnet_despool() into class in bsock.c
1669 kes Modify job report to include director name and Build OS.
1670 kes Move drop root privilege and check_catalog() before fork.
1671 kes Add update database scripts (version 9 to 10) to updatedb directory.
1673 ebl Check size and age of each file after its backup to see if
1674 it has changed during backup, if 'checkfilechanges' is set.
1675 The FD will do an extra check (stat(2)) after
1676 each file backup. mtime, ctime and size are compared with
1677 'before backup' information. If time or size mismatch, an
1678 error message will be generated. You must upgrade FD to use it.
1680 kes Make database name and user configurable
1681 --with-db-name=xxx --with-db-user=xxx
1682 kes Add back database type to message.c for debugging.
1684 kes Implement dir_sql() which issues an SQL query.
1685 kes Modify bat medialist to use dir_sql() and do some minor C++
1686 formatting as well as eliminating a number of pointers, simplifing
1689 kes Fix some of the mtx-changer grep commands for tape label readers.
1690 kes Convert a number of bsendmsg into the appropriate send/warning/error
1691 message class calls.
1692 kes Suppress the using database message in the .sql command.
1693 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
1695 kes Add context menu for floating a window.
1696 kes Some minor cleanup and name changes in qt-console
1697 kes Add doing mt setblk 0 in Win32 mtx-changer.
1698 kes Apply Martin's bug fix to move definition of ENODATA for
1700 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
1701 sqlite2 and sqlite3.
1703 kes More pruning cleanup.
1704 kes Turn on wait_for_drive by default in mtx-changer.
1705 kes Turn on Batch insert code by default as it now passes regression.
1706 kes Add ./configure --enable-bat to enable building of Bat.
1707 No install yet though.
1709 kes Implement a new .sql command for bat.
1710 kes Implement code to turn off pruning in obtaining the next volume.
1711 Pruning is turned off for the status dir command, but turned on
1712 for SD requests and for the list nextvolume command.
1714 kes Correct Qmsg() that was not updated correctly when committing a
1715 previous change (probably the recent TLS patch).
1717 kes Write new subroutine is_volume_purged() that explicitly checks
1718 if the Volume is purged, and if so marks it as such. This should
1719 resolve problems reported about needing to mount twice to recycle
1721 kes Rewrite pruning algorithm to do more work in the SQL engine, and
1722 to pass a list of JobIds to be deleted to SQL. Also, minimize the
1723 amount of duplicated code.
1724 kes Do volume pruning only for the Media Type desired (reduces pruning time
1725 if multiple Media Types are in the same pool).
1726 kes Implement more detailed info in the Job report for the Bacula version
1728 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
1730 ebl Add bbatch tool to bench database and insert mode.
1731 Fix sql quote stuff in batch mode
1732 Fix sql stuff for mysql
1734 kes Correct problems with am/pm scheduling. Fixes bug #808.
1735 kes Implement new prunning code that prunes up to 1000 jobs at
1736 the same time. The same technique can be applied to a number
1737 of other prune/purge subroutines.
1738 kes Add an insanity check when starting a new tape job to ensure
1739 that the tape position has not been changed. If so fail the
1741 kes Fix Win32 build for dlls to add the folllowing:
1742 src/lib/bsock.c -- new file with new entry points
1743 src/lib/dlist.c -- new entry points
1744 src/cats/sql_create.c -- new entry point
1745 src/cats/sql_cmds.c -- new DATA item exported
1747 ebl batch mode cleanup bscan-test is ok now.
1748 kes Implement SD code to check length of disk volume before appending.
1750 kes Correct return status on db_batch... routines.
1751 kes Add call to db_write_batch_file_records() to migration code.
1752 ebl Fix AfterJob timing
1753 kes Move the checking of the database in initializion of the Director
1754 to after we drop privileges. This avoids the need for both root
1755 and bacula access to the DB.
1756 kes Correct a misplaced variable definition in src/filed/backup.c
1757 kes Correct how the new batch insert db_create_attributes_record()
1758 uses the arguments. Caused a seg fault in bscan.
1759 kes Implement lock() and unlock() methods in DEVICE class.
1760 Implement block() and set_block(xx) methods in DEVICE class.
1761 kes Modify bnet_connect() so that it uses time() to check for the
1762 wait time expiring (on some OSes, some system calls may not
1763 return immediately).
1764 kes Modify Verify to obtain the previous JobId when it is actually
1765 running rather than at schedule time (as it was in 1.38.x).
1766 kes Fix src/job.c to handle MaxWaitTime correctly. This should
1768 kes When checking pid in pid file, continue running if the pid is
1769 the same as ours. This occurs on IRIX after a system crash.
1772 kes Extend new GUI API.
1773 kes Make the ua structure a class, and implement send_msg(),
1774 error_msg(), warning_msg(), and info_msg().
1776 kes Apply fix from for building wx-console on the Mac from
1778 kes Implement new select mechanism for GUI programs.
1779 kes Reorganize initialization of stackedWidgets in bat.
1781 kes Add updated nagios plugin supplied by Christian Masopust.
1783 kes More bat implementation.
1784 kes File migrate bug with Pool Occupancy using mediaid instead
1785 of jobids. Fixes bug #795.
1786 kes Fix orphaned buffers in filed backup and verify due to
1787 crypto buffers not freed during errors. Fixes bug #789.
1788 kes Extend new GUI api code to tree commands.
1789 kes Ensure that tree and dot commands check console ACLs.
1790 kes Permit marking directory with trailing slash.
1791 kes Allow 20 console connections (instead of only 10).
1793 kes Add smartctl call to bacula-sd.conf as an example of getting
1796 kes Modify jobq.c to let simultaneous restore jobs run. This may
1797 cause them to fail if they cannot get a drive.
1798 kes Add Client Connect Wait to Storage daemon to permit users to
1799 modify the time the SD waits for a FD connection.
1801 kes Correct virtual changer check which was backwards. This caused
1802 volumes to be unloaded into slots already occupied.
1804 kes Apply Command ACL filter to JobId list in restore command.
1805 kes Correct typeo in var.c patch.
1807 kes Don't let Bacula prune File or Job records for the current Job.
1808 kes Fix variable substitution pad + inc bug reported (with patch)
1811 kes Correct SQLite log table index as reported by Luca Berra.
1813 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
1815 kes Begin implementing new comm signals for API.
1816 kes Fix a few places in lib/message.c where the open fd may
1818 kes Continue implementing lib/bsock.c (real class). Make jcr,
1819 who, host, and port private. There are new methods to access
1820 them for non-class use. This required touching a number of files.
1822 kes Add LANG=C to autoconf/randpass so it works with languages other
1823 than English. Fixes bug #788.
1825 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
1827 You will not be able to generate Include/Exclude list any more.
1828 It will be fixed soon.
1829 If you want to use this, you can apply
1830 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
1832 kes Restore of sockets created false error messages because Bacula
1833 no longer restores sockets, but the code was still trying to
1834 set the attributes on a non-existent file. Reported by a user.
1835 ebl finish RecyclePool feature
1836 Media will takes Pool.RecyclePool
1837 when moving from Scratch to a Pool or when user will do
1838 update volume=xxx frompool
1839 To use it, add RecyclePool = aPool to your Pool resource
1842 RecyclePool = Scratch
1846 kes Expand new BSOCK class adding signal() and new BNET signals.
1847 kes Begin enhancing the dot commands adding a new API function
1848 that returns more information and will make it easier
1849 to interface to the Director from a program.
1851 kes Make DEVICE fd private. Its new name is m_fd, and can be
1852 obtained with dev->fd() outside the class. This is the
1853 first of many DEVICE members to be made private.
1854 kes Implement Michael Renner's idea on having a virtual disk
1855 changer. I made some minor modifications (e.g. I did not
1856 implement the Virtual Changer directive, but simply set
1857 the Changer Command to an empty string.
1859 kes Implement a BSOCK send() method that writes the whole record
1860 in a single write() request rather than in two.
1861 ebl add update volume=xxx recyclepool=yyyy
1862 volume takes recyclepool from pool when using update volume=xxx from pool
1864 kes Fix encryption deblocking bug, which caused some restored files
1865 to be truncated. This fixes bug #763.
1866 kes Add FD event sequence order prepared by Eric -- for RunScripts.
1867 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
1869 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
1870 ebl Use btime_t instead of uint64_t in media patch.
1872 kes Optimize the use of the database a bit in the Status dir command.
1873 Only open it when needed, ensure that if any previous database
1874 was opened, it is closed.
1876 kes Correct VolCatBytes bug from media patch.
1877 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
1878 in the case of orphaned records.
1879 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
1880 and File records in 300K chunks to be more efficient. This
1881 idea came from Juan Luis Frances (if I remember right).
1882 kes Apply Eric's scratch patch that moves a purged Volume to
1883 the RecyclePool. Question: how is RecyclePool set? what
1884 happens to the ScratchPool?
1885 kes Apply Eric's media patch that collects read/write media
1886 times as well as byte counts. This patch requires a
1887 simultaneous upgrade of the DIR and SD. Note, there
1888 should be some way to turn off timing. I'm not sure
1889 times are in Bacula units.
1890 kes Apply Eric's batch-insert patch.
1892 kes Update projects list.
1894 kes Implement Include/Exclude file lists in FD as dlists using
1895 the new dlistString class. This permits efficiently having
1896 large include/exclude lists and completes project Item 25.
1897 kes Fix dird/ua_cmds.c so that a cancel command checks if the
1898 console is authorized to cancel the job. This fixes bug
1900 kes Modify SD so that the VolCatJobs medium record is updated
1901 at the beginning of a Job rather than the end. This
1902 fixes bug #775 where exceeding MaxVolJobs caused jobs
1904 kes Added a mutex around getting and setting Volume information
1905 so that multiple simultaneous jobs will single thread.
1907 Switch to using Subversion
1908 kes Remove src/pygtk-console/ from configure
1910 kes Delete src/lib/btree.c from win32 build, then add rblist.c
1911 plus the entrypoints.
1912 kes Apply patch supplied that corrects debug print
1913 in canceling jobs for max run time. Supplied as
1914 part of bug #621, which was previously fixed.
1916 kes Test on job_canceled() and sd_msg_thread_done inside
1917 loop starting the message thread to avoid a race condition.
1919 kes Remove rl_catch_signal from console.c as it conflicted
1920 with the header definition. Fixes bug #765.
1921 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
1923 kes Clarify some stored/acquire messages to indicate if the
1924 problem is with read or append.
1926 kes Fix memory leak with storage ids in cats/sql_get.c
1927 kes Terminate watchdog earlier to avoid reference to released
1928 memory -- reported by Jason Austin.
1929 kes Move closing the database from jobq.c to the director daemon
1930 termination routine. This fixes memory leaks for shadow jobs
1931 (i.e. migration jobs).
1932 kes Free up the unique jobid chain items in migrate.c. This fixes
1933 a memory leak problem.
1934 kes Convert some ugly looking for statements to use foreach_alist
1935 in findlib/find.c. This will facilitate converting the structures
1936 to use dlist (for large include/exclude lists).
1937 kes Fix a bug in the btree.c and btree.h routines, then rename them
1938 rblist and add them to be built in src/lib. Include some new
1939 methods written by Rudolf Cejka that make the code more readable
1940 (hides some of the ugly casting).
1941 kes Add set_next() and set_prev() methods which make the code much more
1942 readable. Also add a new dlistString class that facilitates storing
1943 strings in dlists. To be used in the large include/exclude lists.
1944 kes Make some trivial modifications to lib/tree.h that use rblist
1945 rather than dlist for storing the tree links. This was suggested
1946 by Rudolf Cejka. The result of this is that the restore tree now
1947 uses red-black binary trees rather than simple linked lists. This
1948 should give rather dramatic speed improvements for directories
1949 contining large numbers of directories/files (more than 10000).
1951 kes Fix maxruntime bug #621.
1953 ebl Implement the include JobID in spool file name project.
1954 kes Reorder projects file in order determined by Jan 2007 vote.
1955 kes Implement item #12 on project list -- quick release of FD by
1957 kes Fix open of SQLite3 db where user does not have write permission
1958 so that DIR does not crash. Fixes bug #761.
1960 kes Add back missing @ in Win32 Makefile.
1961 kes Change 'Device not configured to autolabel' from INFO
1963 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
1964 which should restart an indefinite # of times.
1965 kes Fix configure --help to print --with-mysql[=DIR]. Same for
1966 other DIR specifications.
1968 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
1969 Fix path quoting in SQLite scripts.
1970 Fix problems with SHGetFolderPath.
1972 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
1974 kes Fix Job restart on error bug that promotes an Inc to a Full
1975 backup. This should fix bug #755.
1976 kes Add qt-console and first cut of code.
1980 kes Fix Bacula->Documentation link on Win32 to point to index.html
1981 instead of bacula.html. Fixed bug #750.
1982 kes Return JobId in db_get_job_record() when JobId==0. This should
1984 kes Do not release source pointers when restarting a failed job.
1986 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
1987 This *should* fix bug #747.
1988 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
1991 kes Modify USTORE constructor to set an empty store_source string,
1992 and don't copy the store_source string in a cancel. Hopefully
1993 this will fix Arno's seg fault, bug #744.
1994 kes Add back code to disable conio in configure. Fixes bug #743.
1995 kes Correct the Options scanner in the FD to correctly handle
1996 SHA1 option, which was eating the next option. Reported by
1998 kes Add code to indicate when the SD is spooling, spool wait, and
1999 despooling as requested by Alan Brown.
2001 Version 2.0.0 released: 4 January 2007