1 Technical notes on version 2.5
9 Multiple command/console per runscript
10 console command in runscript
13 State file updated on job term
16 Duplicate Job directives
17 - Allow Duplicate Jobs
18 - Allow Higher Duplicates
19 - Cancel Queued Duplicates
20 - Cancel Running Duplicates
21 Ensure they work with RerunFailedLevels
25 Improved status commands for Bat
26 Spooling/despooling status
27 Implement ftruncate for NFS devices
28 Add long term statistics job table
31 separator in console (!$%&'()*+,-/:;<>?[]^`{|}~)
36 kes Tweak separator command in console to start disabled and
37 allow defining no separator character. Also make code a
38 bit more fault tolerant.
39 kes Make btraceback write the traceback to the working directory
40 before attempting to mail it.
41 kes Add a RFC to Projects.
43 kes Attempt to implement a kludge to make Qt work with bat
45 kes Setup rstorage correctly. Virtual backups are working.
47 kes Move setting JobLevel and JobType into a method, which should
48 allow completing Virtual Backups.
49 kes Fix verify jobs to work again.
51 kes Virtual Backup tweaks -- it is close to working.
53 kes Ensure that SD tried to mount a volume not in an autochanger
54 at least once before asking for operator intervention.
55 kes Make SD aware of Virtual Backup jobs.
56 kes Add VirtualFull for bat.
57 kes Changes to get read storage correct for Virtual Backup.
59 kes Remove old code from label.c
60 kes Split display_display_info() out of write_bsr_file()
61 kes do_vbackup_init() working -- i.e. bootstrap file built.
62 kes Change Bacula trademark owner from John Walker to Kern Sibbald
63 kes First non-working cut of vbackup
64 kes Correct FD heartbeat code to use volatile variable accessed by
66 kes Zero thread id with memset if on Win32 in case it is a struct.
67 kes If cannot create JobMedia record, continue to try to write eof
68 and clean up in block.c
70 kes Add code to interface OpenSSL to new Win32 pthreads code which
71 used a structure for thread_t.
73 ebl tweak bat for win32 compilation
75 ebl Remove tokyo cabinet from the source
76 ebl Update configure/autoconf to support berkeley DB
77 ebl Add a sort to db_get_file_list() to improve bsr construction time.
79 kes Add a mtx-changer.conf file that is not overwritten during
80 an upgrade. It fully configures the mtx-changer script.
81 kes Clear in-use bit on vol when unused while swapping.
83 kes Remove sleep at end of ./bacula
84 kes Clear hash packet for hardlinked files correctly. This corrects
85 a long standing bug where hardlinked files selected individually
86 would occasionally not be restored.
88 kes Apply Eric's patch to ensure that autoprune does not return
89 a Volume not in the autochanger unless requested to do so.
90 kes Correct bat restore display of multiple drives. This fixes
92 kes Do find_a_volume() each time an unload is done. This
93 fixes the failure of maxvol2-test.
95 kes Add some SD debug code.
96 kes Do find_a_volume() each time an unload is done.
97 kes Apply Joao's DBI patch that adds easier configuration of DBI drivers,
98 and adds --with-db-port to ./configure.
99 kes Use Qmsg() in job.c watchdog callback.
101 kes Release main control rwlock if ABORTing.
102 kes Make watchdog connect timeout queue messages rather than sending
103 directly to avoid lock conflicts with the real thread.
104 kes Add const char in dbd.c to avoid compiler warnings.
105 kes Fix python compiler string warning. Note, IMO the GNU C++
106 compiler guys have made a *very* bad change to their compiler.
107 They now force all strings to be 'const' unless you explicitly
108 cast them, which is extremely ugly and ruins nice code as well
109 as creates a lot of useless work.
111 kes Fix mtx-changer to detect both versions of Ubuntu (Debian)
112 mt. This fixes bug #1116.
113 kes Add const in python files to reduce compiler warnings.
114 This may have to be backed out because of later compiler
116 kes Fix failure of 2drive-concurrent-test. Always read label;
117 clear_unload() only after drive is defined in acquire_for_read().
119 kes Generally clean up the manual tape loading code. The main
120 conceptual change is that when a volume is marked to be unloaded,
121 its volume name is retained, and it is only marked as unloaded
122 when either the autoloader says it is unloaded or another tape
123 is read on that drive.
125 kes Add debug code and refactor subroutine in stored/mount.c
126 kes Fix format problem in bscan output reported in bug #1105.
127 ebl Fix get_next_volume_for_append logic with autochanger
128 - use pruned volumes if found
129 - don't reset the inchanger flag after getting a recycled volume
131 Fix recycle_oldest_purged_volume to take InChanger flag in account
133 ebl Add mmap/unmmap implementation for tokyodbm under win32
135 kes Make first step toward eliminating globals from config
136 scanning. Also should be a workaround for FORTIFY_SOURCE
137 GNU C bug -- fixes bug #1042.
139 kes Apply duplicate job tests to restarted jobs.
140 kes Copy more data when restarting a job so that run
141 overrides are kept. This should fix bug #1094.
143 kes More word alignment cleanup.
144 kes Fix bug where SD did not ask operator if the device could not
145 be opened. Reported by Eric.
147 kes Add dbuser to DIR conf file (replaces user).
148 kes Add --with-db-password to ./configure
149 kes Fix regress to handle db_password.
150 ebl Add new "status storage slots" that list autochanger
152 ebl Update vtape driver to compile only under Linux.
153 ebl Fix a bug when restoring with a wrong mediatype.
155 kes Eliminate ints from conf files and structures to avoid
156 word alignment problems
158 kes Fix bug reported by Scott Barninger where the bacula script
159 refers to scripts in the wrong directory. Needed to meet the
160 requirements of recent FHS location changes.
161 ebl Disable vtape for FreeBSD.
163 ebl Modify disk-changer to check if slot contains something before
166 ebl Fix vtape on win32 and debian.
167 ebl Fix autoselect patch (cause segfault).
169 ebl Fix autoselect option broken for a while. Fix #1089. Need some
170 work with StorageId to be able to use a particular drive in a
173 ebl Rename vtape to vtape.
174 ebl Update vtape driver.
176 ebl Modify vtape driver to avoid sparse file.
177 kes Add make clean of qt-source directory during ./configure
178 kes Store last block number written to tape in DEVICE and
179 use it for testing for correct last block on EOT.
181 Release Version 2.4.0:
185 kes Make sure to clear JS_WaitMedia when operator mounts a Volume.
186 This fixes bug #1095.
188 kes Add create_postgresql_database.sql to Win32 installer. Should
189 fix problem reported by Juilio Monteiro.
190 kes Get correct slot when auto unloading a device. This fixes bug
193 kes Fix multiple media restore.
194 kes Make DEVICE Slot private and access it via a method.
195 Allows better control over when it is set and cleared.
196 kes Fix possible seg fault if SQL error.
198 kes Add Martin's fixes to argument scanning for the estimate
199 command. This fixes bug #1093.
200 kes Add debug code to SD.
201 kes Fix renaming a Volume, which used the wrong Volume name.
203 kes If operator has rewind tape, print warning, release tape and
204 try once more. If tape is positioned somewhere, something went
205 wrong, so mark the tape in error and try once more. Previously
206 this error was fatal, now it produces an error message.
207 kes Ensure correct volume name displayed during restore
208 kes Ensure that Volume is mounted for restore.
210 kes Fix a few more Coverity reported problems.
212 kes Apply Allan Black's status dir job count patch.
213 ebl Add information about IMPORT/EXPORT slots in mtx-script.
214 kes Enhance a couple of SD debug messages.
215 kes Tweak unload flag setting and ensure it is set during swap.
217 ebl Fix #1091 about bad output in estimate command.
219 kes Modify autochanger locking to attempt to avoid race
221 kes Make sure device not busy before doing label command.
222 kes Display open() errors except when polling. Previously too
223 many were suppressed. This should fix bug #1070.
224 kes Fix Win32 reparse points. Bacula will not recurse into any
225 reparse point directory, including mount points, unless the
226 directory is explicitly mentioned at the top level (same as
227 with Unix). A file that is linked to another file will be
228 backed up -- much as Unix does for hardlinked files.
229 This fixes bug #1041.
231 kes Remove double quotes from ChangeLog and ReleaseNotes
232 kes Remove StorageId test when pruning and recycling (Eric's changes).
233 kes Remove old form of locking when getting volumes -- causes deadlock.
234 kes Change bat dirstat layoutWidget to dirstatlayoutWidget to make
235 the name unique and to eliminate compile time error.
236 kes Add accurate.o to Win32 FD Makefile
238 kes Fix cats dll build on Win32 after db_update_job_end_record
239 calling sequence change.
240 ebl Switch to tokyo dbm instead of htable in accurate code
241 ebl Include tokyo dbm to bacula source tree
243 kes Fix buffer overruns detected by Coverity.
245 kes Tweak joblog display.
247 kes Implement --without-qwt
248 kes Fix layout of restore tree dialog
249 kes Add configure bat QWT libraries, so that bat can be built
250 with or without the QWT libaries.
252 ebl Add dummy tape driver for regression tests.
253 kes Make sure we unload the right slot when swapping.
255 kes Add debug times, reduce size of two-pool-changer test
257 ebl Tweak autoconf scripts for vtape
259 kes Improve SD reserve debug code.
260 kes Testing an improvement to free up volumes no longer in use.
262 kes Rework SD acquire for read to handle autochanger Volume
264 kes Implement regression that explicitly tests swapping a Volume
265 from one drive to another.
266 kes Enhance disk-changer to detect most error conditions.
267 kes Fix SD code so that it properly swaps a Volume between drives.
268 This fixes bug #1083.
270 kes Apply libdbi patch from Joao Freitas for regress and for
271 Bacula trunk. Regress now works with libdbi. Nice.
272 kes Apply .nobackup patch from bug #1077 submitted by
274 kes Apply Bastian Friedrich's patch that adds %p to edit the pool
275 name into jobs cloned via the run directive.
277 kes Prevent a Volume that is being swapped from being freed from
278 the volume list. This will most likely fix, at least partially,
280 kes Fix strippath so that it does not get a buffer overrun and crash FD.
281 This fixes bug #1078.
282 kes Remove 50 millisec wait in SD that broke debugger.
283 ebl Add MaxRunSchedTime option that specifies the maximum allowed time
284 that a job may run, counted from when the job was scheduled.
285 ebl Fix MaxWaitTime option that specifies the maximum allowed time that
286 a job may block waiting for a resource, counted from when the job starts
287 ebl Rename (add) Max(Incr|Diff|Full)WaitTime to Max(Incr|Diff|Full)RunTime
288 kes Apply patch from bug #1076 by Tullio Andreatta <t.andreatta@troppoavanti.it>
289 that implements multiple commands per line in the console when using
290 readline. Modify the default to use a semicolon as the command separator.
292 ebl Fix SQL query in migration code.
293 ebl Make accurate mode with hash disk pass regression tests
295 ebl Implement first cut of accurate backup with hash disk.
297 kes Force unload of volume when wrong volume mounted in SD.
299 kes Fix bat seg fault at termination.
300 kes Add Bacula generated version to bat about box.
303 kes Experiment with allowing multiple read jobs.
304 kes Move final volume swapping code to DCR method and
305 call it from acquire_for_read().
306 kes When wrong volume is mounted during read, unload_autochanger.
308 kes Integrate the libdbi changes from Joao Henrique Freitas
310 kes Stop searching for Volumes in SD askdir if DIR returns the
311 same volume name twice in a row.
312 kes Close bat console windows first to eliminate error message
315 kes Tweak the swap Volume from one drive to another code so that
316 it now seems to work.
317 kes Resolve several problems with recycling that broke the new
318 code (these problems are in 2.2.9 as well).
319 kes Remove the volume lock when calling the sysop code.
320 kes Don't mark a reserved volume with no writers as unused otherwise
323 kes Rework class structures for VOLRES, DCR, and DEVICE to make
324 the method names a bit more logical, and for more logically
325 handling the responsibilities.
327 kes Remove redundant code in terminating the scheduler that just
328 causes a seg fault in many cases.
329 kes Cleanup releasing a volume and make it a DCR method.
330 kes Improve algorithm for detecting pre-reserved volume and
333 kes Tweak volume swapping code so it works.
334 kes Correct name overloading in mount.c
335 kes Replace released flag in VOLRES with reserved and add access
336 methods for the VOLRES class.
337 kes Prevent volume from being released while being swapped.
338 kes Apply Bastian Friedrich's edit codes patch for the bpipe-fd
340 kes Apply Bastial Friedrich's edit pool=%p patch for run clone
342 kes Refactor parts of stored/mount.c
344 ebl Add sanity checks for VolWriteTime and VolReadTime
345 ebl Take care of bad clock changes while computing VolWriteTime
346 and VolReadTime. This should fix or limit #1066
347 kes Correct error string numbers in dird/catreq.c
348 kes Restructure reserving, acquiring, and mounting volumes. Calls to
349 autochanger are deferred for mount.c -- simplifes the code.
351 kes Do not prune any running job. It just fails the job.
352 kes Lock the volumes when changing dev->reserved_device and marking
353 the volume unused otherwise the device can get reserved by
354 another job before the volume is released, thus blocking it.
356 kes Correctly detect Ubuntu systems, and add ubuntu platform directory.
357 kes Fix bug #1063, reuse of freed ptr in list nextvol.
358 kes Release regex compile buffer in filed/job.c
359 kes Add proper type of const char in sql_create.c
360 kes Turn off debug in daemon termination routines
361 kes Move free_volume_list() before devices are freed in stored.c
362 kes Fix reference to uninitalized stack variables in bregex.c.
363 This should correct bug #1067.
365 kes Fix possible seg fault in SD when freeing a volume entry.
367 kes Implement unload_dev() before swap device.
368 ebl Add statistics prunning with option and menu
369 kes Separate unload_dev() from unload_other_device() in autochanger.c
371 kes Apply patch from bug #1069 that corrects spurious error messages
372 when ACLs enabled on SGI but no ACL exists.
373 ebl Fix small segfault in bacula-sd when debug level is 500
374 kes Modify run_program() and run_program_full_output() to use
375 call by reference for the results string. This corrects a long
376 standing problem where the address of the string may be changed
377 in the subroutine but not in the calling program.
379 kes Re-enable code to remember last volume mounted on a non-tape
381 kes Add patch supplied in bug #1068 that fixes a SD crash when using
382 a Virtual autochanger.
383 kes Generate correct JobMedia records during spooling/despooling when
384 running concurrent jobs. Thanks to Tom Ivar Helbekkmo
385 <tih@hamartun.priv.no> for excellent analysis and testing.
387 kes Tweak hash algorithm for htable using Martin Simmons idea
388 for doing a circular shift.
389 kes Remember what volume is in VTLs (previously turned off for
391 kes Analysis of JobMedia records by Tom Ivar Helbekkmo <tih@hamartun.priv.no>
392 pointed out some problems in creating JobMedia records during
393 spooling with concurrent jobs. Fix the problem by updating the
394 start file position before despooling and generate a jobmedia
395 record at the end of despooling.
397 kes Fix handling of JobMedia records during spooling and when a
398 Volume is changed without actually writing data to the Volume.
400 kes Rework certain SD locking based on gdb tracebacks of deadlocks
401 sent by Eric. This code now uses only the volume_lock() rather
402 than the reservations lock when at EOM and acquiring a new
404 kes Ensure only one exit point in several subroutines.
406 kes Implement bsock code to permit locking. Use the new code in Verify
407 in the FD to prevent the heartbeat thread from disrupting the Verify
408 data sent to the Dir.
409 kes Modify SD locking to eliminate locking the reservations system from
410 outside the system. Use the volume lock when getting media data
411 and reserving a new volume at end of media.
412 kes Add Eric's volume_unused() fix to stored.c so that Volumes found
413 when SD starts are not locked into place.
415 kes Fix error compiling runscript code on 64 bit machines.
416 kes Tweak Win32 mount point code.
417 kes Fix a couple of bugs in the accurate code (bad sscanf, buffer not
418 cleared giving bad file estimate).
419 kes Implement BIG_MALLOC in htable code. Runs 2.5 times faster for
422 kes Keep Schedule run lists in order as suggested by
425 kes Implement autostart scripts for Debian.
426 ebl Implement upgrade catalog scripts.
428 ebl Apply jobstat patch for long term statistics. Have to implement
429 purge stats command and upgrade scripts.
430 kes Fix mtx-changer.in for broken Debian mt program.
432 kes Fix large number of JobMedia records reported by Eric Bollengier.
434 kes Apply doc fix from bug #1062.
435 kes Resolve crash and improper restore wx-console Win32 restore
436 GUI. Fixes bug #1065.
437 kes Update Win32 wxWidgets to latest version.
438 kes Attempt to do correct handling of Win32 mount points. Should
440 kes Fix Win32 FD backup/restore memory leak due to improper termination
441 of BackupRead/Write. This fixes bug# 1038.
443 ebl Reduce memory usage for accurate backup, working only with ctime
444 and mtime. (not all Lstat field)
445 About 40MB for my Linux system (400.000 files)
447 kes Add dcr->reserved_volume flag that allows us to release a volume
448 even if it is not vol->released. This allows maxvol2 to work when
449 Volumes expire and we are already writing to the device (i.e. a
450 volume is pulled out from under us by another job terminating after
451 we reserve the drive).
453 ebl Permit multiple command/console per runscript definition.
454 RunScript { command = /bin/true ; command = /bin/false ... }
455 ebl Add RunsWhen = AfterVSS to runscript. You can execute a command
456 (restart an application) just after the VSS snapshot on windows.
457 kes Don't zap dcr values during release_volume() as they might
458 have the next Volume to be mounted.
459 kes Fix AIX prototype.
461 kes Second cut of drive switching during backup.
464 kes Update Win32 version of wxWidgets to most recent version.
465 kes Tweak Copy job details.
466 kes Rework dir_find_next_appendable_volume to make a bit more effort
467 to find a suitable volume before giving up.
469 kes Make ask_sysop_to_create... to return if waken from wait.
470 This helps get out of blocked conditions.
471 kes Experimental implementation of switch_device in reservations.
472 kes Implement FD version to allow easier protocol changes.
473 kes Add Plugin Options string -- not yet passed to FD.
474 kes Implement PluginOptions ACL.
476 kes Attempt to correct problems with restores with autochangers and
477 use counts going negative
478 kes Rework SD status command and implement API for bat. Implements
479 header, runing waitreservation, devices, volumes, spooling,
480 and terminated status keywords.
481 .status storage=xxx <keyword>
482 kes Clarify TLS error message by adding double quotes around name.
483 kes Simplify SD/FD status code by putting api flag in STATUS_PKT
484 kes Pass jcr to tls routines so debug messages can be handled better.
485 kes Rework jobq resource allocation code, and possibly fix a bug
486 that caused reference counts to get out of sync.
488 kes Rename fd/dir plugin to use Bacula standard underscore.
489 kes Plugin work -- bring dir up to fd level.
490 kes Start implementation of VTL code
491 kes Fix Win32 build after adding new cats subroutine.
493 kes First cut at Duplicate Job implementation.
495 kes Fix bugs in MaxFullInterval and Implement MaxDiffInterval.
496 kes Start PluginOptions string, and refactor a bit of ua_run.c
497 ebl Apply Allan patch that permit to reset recyclepool.
499 kes Test patch -- possible fix or improvement for bug #1053
500 kes Refactor FD and SD status commands to permit new API code in
501 SD, and to fix Win32 build.
502 kes Win32 build is now working.
504 kes Implement 'MaxFullInterval' and start 'MaxDiffInterval' based on
505 some ideas in patch from Scott Bailey.
506 kes Begin implementation of duplicate Job control.
507 kes Fix some of Win32 build after recent additions.
508 kes Apply patch from Frank Kardel that implements 'honor no dump flag',
509 which causes the FD to detect whether or not the OS has the
510 honor no dump bit (*BSD systems), and if so, to skip backing up
511 any file with this bit set. The feature is enabled by setting
512 'honor no dump flag = yes' in the Options section of a FileSet.
514 kes Correct po warning message with datarootdir
515 kes Implement more code in dird.c to put configuration parsing in
516 a class rather than use globals.
517 kes Restructure SD status command for implementation of bat API
520 kes Suppress incorrect 'Will not descend from x into y' messages.
521 kes Eliminate FORTIFY_CODE=2 bug, and make first cut at removing
522 daemon globals used by parser.
523 kes Apply Joao's patch to separate DB_TYPE and DB_PROG in configure.
525 kes Fix free of plugin_list when none exists.
527 ebl Apply accurate project patch.
529 ebl Fix a segfault when using strip_path option. (Use of pm_strcpy
530 on non-mempool object)
531 kes First cut of converting FD .status to work with bat API.
533 .status client=XXX header
534 .status client=XXX running
535 .status client=XXX terminated
536 kes Implement first cut of Copy Job.
537 kes Implement Catalog in Pool resource. It overrides catalog specified
538 in the Client resource.
540 kes Apply patch (with some difficulties) from Joao Henrique Freitas
541 <joaohf@gmail.com>, which adds support for libdbi as a Bacula
543 kes Add patch from Martin Schmid scm@apsag.com that checks to see if
544 ftruncate() actually works. In the case of some (cheap) NAS devices,
545 it does not, and so recycling NAS Volumes does not work. The code
546 simply unlink()s the file, then recreates it. This fixes bug #1011.
548 kes First incomplete cut of big malloc blocks for htable.
549 kes Tweak plugin code.
551 kes Plugin debug code + tweak a couple bat dialog layouts
553 kes Fix creating first JobMedia record during Migration to include
554 proper index. This caused slow restores of migrated jobs.
555 kes Temp fix to plugin name file_index.
556 kes Bacula backed up and restored a MySQL database.
558 kes Implement plugin restore.
559 kes Implement parsing of db_driver to give db_type index.
561 kes First cut of plugin restore code.
562 kes Fix bug #1047, which had a heap overrun when stripping certain paths,
563 and do not strip paths on symbolic links.
564 kes Set catalog backup database and user name from values specified on
565 the ./configure line.
566 ebl Fix #1031 about wrong pool source information in job report.
569 kes Remove a redundant jcr argument to find_files, match_files, and
571 kes Implement '.status dir header|scheduled|running|terminated' that
572 prints the requested status section. With the exception of the
573 header, the other reports have fields separated by tabs (\t).
575 kes Apply patch from Peter Much <pmc@citylink.dinoex.sub.org> that fixes
576 a resource embedded run command to find a since time if no explicit
577 since time was supplied on the command line.
578 kes Apply state-file.patch sent by Allan Black <Allan.Black@btconnect.com>
579 that updates the state file at job termination time in addition to
580 when the daemon terminates.
582 kes First version where a plugin did a backup.
583 bpipe-fd.so created a backup file, wrote a test
584 string to it, and Bacua could restore this fabricated file.
586 kes Implement DB Driver = string for the DBI driver.
587 kes Remove all old bdb_xxx.c code. Add dummy routines to bdb.c
588 kes First cut of code for loading Win32 plugin dlls. Implement
589 dlopen, dlsym, dlclose, and dlerror in src/win32/compat/compat.cpp
590 and implement a dlfcn.h file based on opengroup's definitions of
593 kes First cut plugin directives.
595 kes Apply patch from bug #1049 to prevent stripping the path on a
597 kes Attempt to fix bug #1047 where stripping a path corrupts the
598 heap. Waiting for feedback.
599 kes Correct the Mount message not to suggest labeling a new tape
600 when doing a restore. Submitted by email by John Stoffel.
601 kes Attempt to work around gcc FORTIFY_SOURCE bug that crashes the
602 FD by using casting. Reported in bug #1042.
604 kes A bit of crypto cleanup. More later.
606 Release Version 2.2.8
608 kes Apply patch from Martin to correct bug #1040, bscan sets existing
610 kes Fixed important spelling error in doc -- bug #1045.
612 ebl Fix bextract to be able to extract non-portable Win32 data to
614 kes Move initialization of read/write res lock earlier in the code.
615 This fixes the crash with a null conf file. This fixes bug
617 kes Redefine CURES in lib/parse_conf to be URES and move it all
618 into lib/parse_conf.c -- this responds to bug #1042, but does
619 not fix it. The fix is not to compile with FORTIFY_SOURCE.
620 kes Backport to 2.2.8 fix de-referencing a NULL pointer in the scanner from
621 the trunk SVN. I don't think this was reported as a bug.
623 ebl Fix a bug during tape initialization with MTSETDRVBUFFER.
625 kes Fix Win32 build with new .def files and DLL_IMP_EXP ...
627 kes Add DataDespooling and DataCommitting status (committing is
628 the last despooling).
629 kes Finish implementation of new reservations code noted below.
631 kes Fix bsnprintf for float point numbers. I broke recently when
632 parameterizing some variables. This fixes bug #1036.
633 kes Undo recent reservations changes ... will apply them later
634 when they work better.
636 ebl Fixes #1034 which cause mysql to hang the connection after 8h
637 ebl Change default statistics target of filename.name and path.path
638 fields for PostgreSQL. This speeds lookup by indexes. Thanks
640 kes A few more tweaks to new reservation code. Make sure to clear
641 vol released flag when retaking volume. When reading label and
642 label is bad mark volume unused. When recycling, mark volume
643 unused so it can be renamed.
645 kes Fix reserve_volume() so it doesn't release a volume in use
646 (i.e. a volume entry not marked released). This should be
647 the last part needed to fix bug #1018.
649 kes Move Heartbeat documentation from Job to Director resource.
650 This fixes bug #1033.
652 kes Fix existing switch drive SD code to call autochanger to release
653 any old volume. This must be done to keep the autochanger from
654 releasing subsequently newly reserved volumes in doing a close().
655 This should fix bug #1018.
656 kes Fail if attempting to get console input in batch mode. This
657 should help fail RunScript console commands that are incomplete.
658 kes First cut implementing switch_drive() in SD (not actually called).
660 kes Implement first cut running console commands in a RunScript.
662 ebl Fixes bug #1028 where 'Selection Type' option was not usable
664 ebl Fixes bug #897 and bug #1005 where bacula doesn't display runscript
667 Release Version 2.2.7
669 kes Add new free_tls() entry point so that Win32 builds.
670 kes Fix compile warning in src/lib/util.c
671 kes Fix entry point for edit_job_codes() so that Win32 builds.
672 kes Fix seg fault Frank Sweetser reports in regression testing
673 on his systems. The problem was that the original author of
674 bsnprintf.c did not take into account the side effects of
675 using ++x in the argument to a #define.
676 kes Make SD protocol backward compatible with version 2.2.x.
678 ebl Fixes bug #1015 where bacula failed to restore acl to a socket
679 because Bacula no longer restores sockets.
680 ebl Always use ignorecase fileset option on win32 FD.
682 kes Apply patch from Michael Stapelberg <michael@stapelberg.de>
683 that implements double quoting include names in conf files,
684 and also allows piping input by having the first character
685 be a vertical bar (|).
686 kes Apply patch from Bastian Friedrich <bastian.friedrich@collax.com>
687 that implement %f in RunScripts to pass the FileSet name.
688 kes Skip leading | when lex input comes from a pipe as suggested
689 by Michael Stapelberg <michael@stapelberg.de>.
691 kes Apply patch for bsmtp Win32 daylight savings time fix supplied by
692 Nerijus Baliunas <nerijus@users.sourceforge.net>
694 kes Implement Plugin Directory and plugin events.
696 kes Implement a security enhancement: TLS authentication but no
697 encryption. Enabled by setting 'TLS Authentication = yes'.
698 Note when this is on, TLS encryption is turned OFF!
700 kes This patch corrects a problem where the maximum concurrent storage
701 jobs counter gets out of sync during restore jobs causing jobs to
702 'wait on max Storage jobs'. This patch fixes bug #1009.
704 kes This patch fixes bcopy so that it produces correct Volumes.
706 kes This patch eliminates spurious output to the console during a VerifyVolume
707 job that contains encrypted data. It fixes bug #1024.
709 kes This patch prevents the 'status dir' command from trying to use a scratch
710 volume and possibly moving it from one pool to another. This patch fixes
713 kes Add new include to postgresql.c suggested by Marc Cousins so
714 that it compiles correctly with pgre version 8.3.
716 kes Fix --archivedir addition to configure. Replace it with
717 --with-archivedir in configure.in This fixes the regression
719 kes This patch fixes bug #1012 where the job is canceled because
720 of Max Run Time exceeded when the job has not yet started.
722 ebl Apply Richard Mortimer patch that fixes #1016 when there are more than
723 one 'part' to write. Instead of each part being stored on disk,
724 written to DVD, then deleted from disk, all parts are written to disk,
725 and only the last is written and deleted from disk.
726 kes This patch fixes the status command to include the formating string for
727 JS_AttrInsterting. It fixes bug #1021.
728 kes This patch should fix the Mac OS X build problem on the latest
729 Darwin, where sys/types.h was not included correctly (apparently
730 due to a change in the Mac headers). The solution was to explicitly
731 ensure that it is defined for the ./configure.
732 This patch also has a rebuild of configure that includes the Debian
733 qt4 patch to check for qmake-qt4. This patch fixes bug #1020.
734 kes This patch should ensure that queued messages to the console are
735 displayed as soon as possible. It should fix bug 1007, but has been
736 reported not to work.
738 kes This patch fixes the infinite loop when trying to increase the
739 maximum number of volumes in a Pool during the add command.
740 This patch fixes bug #1008.
742 Release Version 2.2.6
744 db Remove extra data on estimate command in joblist for bat.
746 kes Cleanup of code in SD that sets the LastWritten date. This doesn't
747 really change anything, but is the beginning of doing it *right*.
748 To do it completely right the LastWritten date must be passed to
749 the SD, but it is not yet done.
750 kes Minor tweaks to some bat restore SQL.
751 kes This patch fixes bug #1003 where putting the message output from
752 a Verify job into the catalog results in a recursive loop. The problem
753 seems to show up only with postgresql (to be verified).
754 kes Correct %x to %p in postgresql debug statement.
756 kes Fix bug #942 where lots of emails where generated when the heartbeat
757 interval was low and Bacula wanted a different tape from the one in
760 ebl Add new SD despooling attributes and Dir inserting attributes
761 job status codes in the catalog (Status table).
763 ebl Use qmake-qt4 instead of qmake when available (debian system).
765 kes Add a security warning to src/cats/make_catalog_backup.in indicating
766 that passing the password via the command line (arg 3) is insecure.
767 This responds to bug #990 (it doesn't fix it).
769 kes Set default debug_level to zero. This corrects bugs #991 and #993.
770 kes Fix a crash in bat when it cannot connect to the Director for example
771 if the Director is not running.
772 kes Remove redundant INDEX (JobId) from File table in the trunk.
774 kes Make explicit exception to GPL in LICENSE to permit linking
775 the Win32 FD with Microsoft VSS code.
776 kes Apply the Solaris package patch from
777 Masopust, Christian <christian.masopust@siemens.com>
778 kes Apply the patch to optionally add a timestamp in the debug output
779 submitted by Mariusz Czulada <manieq@wp.eu>.
781 ebl Use PQerrorMessage instead of PQresultErrorMessage in postgresql
782 backend (sql_strerror). Fixes bug #989
784 kes Apply Michael Short's <mdshort@gmail.com> Win32 regress patch.
785 It applied with no problems.
786 kes Add PATH command to SunOS part of mtx-changer.in so that sed and
788 kes Redirect stderror to stdin on mt status command in mtx-changer.in
789 since the status is returned on stderr on Solaris.
790 kes Activate Close button on tray-monitor window. This fixes
792 kes Check for NULL item in parse_conf.c before calling it. In the
793 case of Device, there is no item and this caused a seg fault when
794 Device appears in the conf file.
795 kes Add a #define __CONFIG_H when including config.h in bacula.h. This
796 avoids pulling in config.h multiple times in some new code.
798 kes Fix spurious warning message printed when creating a volume with
799 a LabelFormat. This fixes bug #976.
801 Release Version 2.2.5
803 kes Add JobId in place of Job name in all the Jmsg() output.
804 kes Correct the APP_DESC for the Win32 storage service (remove an e).
806 kes Make maxvol-test and new more strict maxvol2-test work.
807 kes Print JobId in all Jmsg() job output.
809 kes Add new SD despooling attributes and Dir inserting attributes
810 job status codes. This fixes bug 961.
811 kes Fix Win32 drive display in bat version browser. Fixes bug #962.
813 kes Fix doc issue. This fixes bug #963.
814 kes Fix listing performance problems in bat. Pointed out by
816 kes Remove old debug code.
817 kes Fix bat code that tests for Win32. This should fix bug #968
818 kes Query 5 list wrong Vol after migration. This fixes bug #960
820 ebl Fix #969 where user can't change Replace option in restore menu.
822 kes Save jcr in thread specific data (tsd) for each thread.
823 kes Make Dmsg() print JobId as -%u.
824 kes Make Jmsg, Emsg, and others automatically pickup the jobid
825 for the thread if it exists.
826 kes Remove old reservation debug jid code.
827 kes Remove get_jcr_from_tid() from OpenSSL and tls code.
828 ebl Add an option that permit to specify spool size in job
829 definition. (Applying patches/testing/spoolsize_per_job.patch).
830 You must upgrade SD and DIR at the same time.
831 dvl Add new configuration item --archivedir
832 dvl Adjust regression tests to use tmp not /tmp. This will allow
833 multiple concurrent runs of the regression tests.
835 kes Fix race condition that drops final block written to volume.
836 This happens in rare cases with multiple simultaneous jobs
837 when the Volume fills. This fixes bug #964. May be related
838 to bug #935 and possibly #903.
839 kes Eliminate more strerror() and replace with bstrerror().
840 kes Remove BSD getopt and replace with unrestricted IBM version.
841 kes Fix Win32 build for changed calling sequences.
842 kes More tweaks to the mount volume routines to get everything
843 right. Changed variable name from find to have_vol, which is
844 much easier to understand.
845 kes Enhance btimer debug code.
847 kes Fix FD->SD authorization failure, which was due to spurious
848 wakeups from a pthread_cond_timedwait(). Simply check the
849 predicate before continuing. This fixes bug #953.
850 kes Add const char where needed (more to do). Remove temp debug code.
852 kes Setup SQLite busy handler before doing queries. Fixes bug #967.
853 kes Don't overwrite error message in check_tables_version.
855 kes Unlock batch insert tables with same calls used elsewhere.
856 kes Allow starting 59 jobs a second.
857 kes Make SD session key more random.
858 kes Add retry for SQLite opening db if it fails. Probably helps
860 kes Suppress extra error messages during batch insert failure.
862 kes Add jcr to timer packets so if killed message can be sent to job.
863 kes Add JobId to all Dmsg() output.
864 kes Put some FD auth code on dbglvl rather than fixed.
865 kes Return insert attributes error message in db msg buffer to avoid
866 false error messages. Helps fix bug #966.
867 kes Separate batch init error messages. Probably helps fix bug #966.
868 kes Make SD code that contructs attribute insert check string lengths
870 kes If Dir gets an error during inserting attributes, cancel SD.
871 This reduces unnecessary error messages.
873 kes Correct search boolean for getting Volume info
874 ebl Cleanup batch insert code. Probably fixes bug #965.
875 kes Back out one small change to the reservation system (reserving a volume).
876 kes Rework how a Volume is mounted. It is now much more intelligent and
877 will always attempt to use any mounted volume if possible and reduces
878 calls to the Director asking about volumes.
880 kes Turn off some code when batch insert not enabled.
881 kes Edit FD name in connect error messages.
882 kes Rework the reservation system to take into account that the Director
883 might give us a Volume that is different from the current one being
884 used, and to ensure that we don't exceed Maximum Volume Jobs.
885 This fixes (mostly) bug #947 ' Maximum Volume Jobs = 1 produces
886 fatal error with multiple jobs running'
887 kes Add more debug code in reservation system.
888 kes Implement maxvol-test to check bug #947.
890 kes Add code to handle tray monitor separated from Win32 FD.
891 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
893 kes Add missed return in fixing verify bug -- trunk only.
894 ebl Fix a command parser issue causing a director segfault.
895 kes Fix ANSI tape labeling. Fix restoring ANSI labeled Volumes.
897 kes Increase the max block size to 4MB fixes bug #957.
898 kes ERABT if user sets min block size > max block size. Fixes bug #956.
899 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
900 is not properly mounted (recognized) during a poll.
901 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
902 Job that has differences reports Verify OK.
903 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
905 ebl Add an option to operate on all pools with update vol parameters.
906 This complete the project 20. Patch from Nigel Stepp.
907 ebl Add history support to bconsole when using readline.
908 Using Ctrl-D to exit doesn't update .bconsole_history
909 kes Modify new volume algorithm to use max MediaId for generating next
910 volume number rather than the count of Volumes. This should essentially
911 eliminate the failure rate if some volumes were deleted. Bug #921.
912 kes Begin implemention of Optimize Job Scheduling.
913 kes Implement restore callback that Dirk and I agreed on for bat
914 restore. This fixes bug #928. Restore of backup of zero files fails.
915 kes Fix SQL Catalog logging which broke with new db_escape_string
918 Release Version 2.2.4
920 kes Fix bacula_cats.def for new db_escape_string().
921 kes Increase size of name string when FD making connection to SD.
922 May fix bug #953. FD->SD connection failure.
924 kes Add code to help Dan debug 2drive-incremental-2disk test.
925 kes Add code to try to fix bug #908.
926 kes Add waits to multiple exit detection code to try to force pid
927 file to always be deleted.
928 kes Restore good dev.tar.gz to rescue set appropriate binary property.
930 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
931 trying to switch drives by checking for blocking before unblocking.
933 kes Cancel storage daemon in all cases where FD reports error. This
934 should fix virtually all cases of bug #920.
935 kes Fix db_escape_string() for MySQL which did not compile.
937 kes Fix error message that was clobbered when Dir tells SD it does not
938 have write permission on Volume. This should fix a minor point
939 in bug #942, but not the main problem.
940 kes Add code to cancel job in SD if FD connection fails. This should
942 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
943 dvl Pass jcr and db into db_escape_string() to enable better escaping
945 kes Fix migration code to get correct Volume name with multiple volumes
946 by skipping |. Fixes bug #936.
947 kes Implement patch supplied by Landon to fix bug #944 where using
948 TLS with bconsole uses 99+% of the CPU.
949 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
951 kes Move patches into patches directory.
953 ebl Fix bug #946 about 'bacula-dir -t' which doesn't works
956 ebl Using 'm' in bconsole will show messages like before,
957 and not memory usage.
958 kes Fix bug #935, and probably also bug #903 where files were not
959 restored. MediaId was not properly set in JobMedia record after
962 kes Suppress chown and chmod error messages if the FD is not running
965 kes Apply Martin Simmons' patch that should turn off the new API usage
966 when batch insert is turned off allowing building on older
968 kes Add ./configure search in qwt-qt4 for qwt package
970 kes Bacula is now free of 3rd party GPL copyrighted code!
972 kes Add guid_to_name.c/h which replace idcache.
973 kes Remove enh_fnmatch.c. Make code that references it use fnmatch.c
975 ebl Detect if new PosgreSQL batch insert API is present.
976 kes Correct incorrect mempool call causing Director crash. Occurs on
977 systems without va_copy().
978 sb Update spec files for 2.2.1 release
980 kes Fix memory pool call in ua_output.c. bug #934.
981 kes Replace fnmatch.c and fnmatch.h by modified BSD versions.
982 Add test program to fnmatch.c
984 kes Integrate patch to README.vc8 from
985 Hederer Jean-Sébastien <hedererjs@asperience.fr, had to manually
986 edit it to get it into Unix patch format.
987 kes Implement mkpath.c to replace old FSF makepath.c
989 kes Implement savecwd.h and savecwd.c. Remove FSF versions.
991 Release Version 2.2.1
993 kes Update POTFILES.in
994 kes Cleanup a few underquoted AC_DEFUNs in configure
995 kes Apply patch from Martin Simmons that adds a test for va_copy to
998 kes Fix bug #921 by increasing the number of tries to create a new volume
1000 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
1001 can be called multiple times. Implement a version for machines
1002 without va_copy() that gets a big buffer.
1004 kes Integrate more portable zone offset code into bsmtp.c
1005 Submitted by Attila Fülöp.
1007 kes Fix bad SD->FD return status reported by
1008 (James Harper) <james.harper@bendigoit.com.au>
1009 ebl Fix a bug in read_close_session which return random status
1010 thanks to James Harper
1012 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
1013 and directory names during restore of single file/directories.
1014 kes Add sanity checks to .sql command when string is empty. Hopefully
1015 that will resolve Dirks Director crash.
1017 kes Apply patch submitted by Martin Simmons that corrects a seg fault
1018 in the bsmtp chat subroutine when debug is >= 10.
1020 kes Fix Director crash when running bat SQL queries.
1021 kes Add David's notes on Item 8: Copy pools.
1023 kes Rework projects file to be current and ready for a vote.
1024 kes Enhance lex scanner error message.
1026 kes Tweak LICENSE file to mention BSD code.
1027 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
1028 if specified on the ./configure.
1029 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
1030 This class is intended to allow us to open a second bsock to the
1031 Director while in the restore subdialog.
1033 kes Fix configure to create bat Makefile before creating dependencies.
1034 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
1035 kes Add a tooltip to the tray monitor.
1036 dvl Set the Director's PID file before dropping privs. This fixes
1039 kes Update AUTHORs file
1040 kes Increase the default max concurrent jobs to 20 in FD and SD to
1041 correspond with the default .conf files.
1042 kes Rewrite the Win32 service routines. This eliminates the 3 copies
1043 some different, of the same file created by RN when porting the
1045 kes Rearrange some of the Win32 directories and the placement of the files
1047 kes Set DEVELOPER flag in version.h
1049 ========================================================================
1050 Release Version 2.2.0
1052 kes Apply a second doc patch from Marc.
1053 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
1054 improves the tips section that discusses how to setup multiple
1057 kes Update bat README file.
1058 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
1059 corrects a typo in the Recycle status check in db_find_next_volume().
1060 This will probably fix a number of annoying problems with multiple
1062 kes Modify most of dird/msgchan.c to use bsock class calls rather than
1063 bnet calls -- no functionality change.
1065 kes Modify the Verify output to specify if files are missing on
1066 the Volume(s) or disk. Fixes confusion in bug #916.
1067 kes When more than one Volume is read in a migration job, the last
1068 Volume bytes reported are from the last read volume rather than
1069 the last written volume. Fixed. This fixes bug #910.
1070 kes Fix display of Recycle flag after update volume=foo recycle=yes.
1071 It previously printed New Recyle flag is: no. This fixes bug
1074 kes Correct seg fault when switching tape drives during restore.
1075 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
1076 be used until after 2.2.0 release.
1078 kes Remove fnmatch() in SD that permitted wild card specifications.
1079 This fixes bug #914.
1081 kes Fix %g in filename returned by SQL for browse tree reported by
1083 kes Fix configure so that it puts config.out in the cwd rather than
1085 kes Attempt to fix the locking problem reported by Eric in bug #906.
1086 kes Make berrno class to leave errno unchanged after constructor call.
1087 kes Make bnet_server use the heap rather than the stack to allocate
1088 its socket fd pointers to avoid a crash at termination. Problem
1089 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
1091 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
1092 and putting it in depkgs-qt along with Qt4.3.
1094 kes Rework code in acquire.c that switches drives for reading when
1095 the Media Type does not match. This should fix bug #906
1097 ebl Fix a director segfault during job setup #907
1098 kes Correct seg fault in postgresql when first operation returns no
1099 rows. Fixes Dirks File browser problem seg fault with bat.
1101 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
1102 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
1105 kes Implement PopUp YES/NO dialog for bat.
1107 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
1109 kes Correct RunScript to terminate job in FD on failure.
1110 kes Change abort_on_error and AbortJobOnError to fail_on_error
1111 and FailJobOnError in RunScripts.
1112 kes Minor tweaks of code formating in RunScripts, principally to
1113 avoid depassing 80 columns.
1115 kes Eliminate one #ifdef Win32 in bsmtp
1116 kes Implement grow tool to grow a file for testing very large databases.
1117 kes Add big-vol-test to test Bacula seeking with > 5GB.
1120 kes Modify find_next_volume() to return all values in Media record.
1121 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
1125 kes Update Release notes
1127 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
1128 Warning, in previous beta version, all media get from scratch keep their
1131 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
1132 This should fix bug #842. Made a note to look at removing the temp
1133 files at the end of the install.
1134 kes Add ability to mount and unmount a file device providing it is
1135 marked as being removable and has the appropriate mount and unmount
1136 commands defined in the Device resource. This fixes bug #830.
1137 kes When applying a storage override, release all previous storage
1138 definitions rather than just prepending the new storage.
1139 This should prevent a good deal of confusion.
1141 kes Implement ./configure search for qwt libraries.
1143 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
1144 Win32 FD. This should fix bug #893.
1145 kes Remove an unnecessary beep in Win32 init code.
1146 kes Update copyright dates in Win32 executable about boxes.
1147 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
1148 code with a BSD getopt.c and getopt.h.
1149 kes Remove sched.h from the Win32 compat directory -- not used.
1150 kes Remove the Exit menu item from the Win32 tray monitor. If you really
1151 need to shut it down, do it through the services panel or the command
1153 kes Remove some inappropriate Bacula FSFE copyrights.
1154 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
1155 kes Fix regress config non-portable test as pointed out by
1156 Florian Heigl <florian.heigl@gmail.com>
1157 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
1158 as pointed out by Florian Heigl <florian.heigl@gmail.com>
1160 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
1161 Reported by Frank Sweetser.
1165 kes Fix client-only build.
1166 kes Integrate client-only fixes for bsys (initgroups) and conio from
1167 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
1168 kes Make arguments to get_scratch_volume() in same order as other
1170 kes Rework the prune_volumes() subroutine so that after purging and
1171 no volume found in desired pool, it will check for a scratch
1172 volume. This prevents recycling the whole scratch pool.
1173 kes Add code to status storage to print boffset_t (largefile support).
1175 kes Move qwt (Graphics libarary for Qt4) to depkgs.
1176 kes You now need a --with-qwt=<dir> to be able to build bat.
1177 kes Update src/win32/cats/bacula_cats.def to include the new
1178 db_get_query_dbids() call on Win32.
1180 kes Correct a problem when selecting a scratch volume and moving
1181 it to another pool that lost some columns.
1182 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
1183 kes Enhance Autochanger error messages to include Volume and device name.
1184 kes Rework prune_volumes() code to take account of InChanger flag,
1185 and to handle recycling volumes going to the Scratch pool and
1186 current pool because the RecyclePool directive.
1187 kes Implement a better and more efficient db_get_query_dbids() to
1188 handle creating and passing back a list of DBIds.
1192 kes Start work on new more efficient DBId subroutine. First use
1193 will be for recycling volume to Scratch inchanger.
1194 kes Increase number of JobIds in pruning from 1000 to 10000.
1195 This to be replaced by above routine.
1196 kes Begin implementation of building Qt4 on Win32.
1197 kes Correct typo in fix I added for bad TLS shutdown.
1198 kes Pull 2.0.3 patches into patches directory.
1199 kes Update Release notes. Include qt-console in line count.
1200 kes Update Projects file.
1202 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
1203 bug in migration code where a job that spanned two volumes
1206 kes Implement new BST_DESPOOLING blocked state. Change from locking
1207 during despooling in SD to blocking. This means that other threads
1208 can work with the device structure, in particular the reservations
1209 system while despooling.
1211 kes Fix return in reservation message queue that missed clearing
1212 the jcr lock (implemented 26Jun07 below).
1213 kes Rename a number of dev methods to make locking function names
1215 kes Document locking in lock.c. Move lock structures to new file
1218 kes Move reservations message lock to lock jcr only this
1220 kes Move main SD locking code into lock.c (new file).
1221 kes Update Win32 build to include lock.c
1225 kes Dirk committed the qwt library code for drawing graphs in bat.
1226 kes Tweak install of qwt so that it is integrated with ./configure.
1228 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
1229 out by Eric (my typo).
1230 ebl Fix configure.in to get batch mode enable
1231 kes Return correct string from authenticate.cpp in bat when connecting
1233 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
1234 spurious line drops when using TLS.
1235 kes Do not file reparse points when restoring a file that already
1238 kes Implement Windows reparse points -- similar to directories, but
1239 we do not descend into it. This is a first cut. They seem to
1240 be backed up, but restore is not yet tested.
1241 kes Remove restore_blocking in tls code when shutting a socket to leave
1242 it in blocking mode. Hopefully this will fix the encryption bug
1243 reported by Frank Sweetser.
1244 kes When opening a file for backup, tell the OS that we are going to
1245 read it sequentially -- optimization.
1246 kes Change variable names in authenticate_director() to not conflict
1247 with member names in bat. Caused great confusion with compiler,
1250 kes Queue openssl error messages in case of comm problem.
1251 kes Do shutdown() call if socket terminated.
1252 kes Remove some duplicated code in tls.c
1253 kes Move more of the bsock member variables into private and access
1255 kes Add Frank Sweetser's tls-test to the regression suite.
1257 kes Add Swedish sv.po file
1259 kes Don't print clock skew message in FD if less than 3 seconds diff.
1260 kes Add a bit of VSS info to status client.
1261 kes Implement a first cut of Vista VSS, using Win2003 code.
1263 Release: 2.1.20 beta
1265 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
1266 loaded tape but uses first drive).
1267 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
1268 This was indeed a Win32 issue.
1270 kes Simplify search of autochanger for in-use Volume.
1271 kes Fix exit condition of check for in-use volume. kes Remove
1272 inappropriate my_postgresql_free_result() in db_close()
1274 kes Fix bad return in FD when encryption signature not found.
1275 Probably caused a crash.
1276 kes Inhibit missing encryption signature error messages for
1277 file types where no signature computed.
1278 kes Correct inverted check on autochanger in reservation system.
1279 kes Tweak debug code in autochanger reservation.
1281 kes Add some additional locking in the cats directory in subroutines
1282 that modify packet variables called from batch insert.
1283 kes Rework how dcrs are allocated. new_dcr() can now be called
1284 with an existing pointer, and it will simply clean it up.
1285 This allows the reservation system to test various different
1286 devices, and will permit easy device changes.
1287 kes A bunch of changes all over to handle new new_dcr() calling
1289 kes Work more on the Volume management in the SD. Remember Volumes
1290 for tape drives and for autochangers (even virtual disk changers).
1291 kes When looking at the Volume list to reserve a drive, handle
1292 autochanger names correctly by interating through the changer
1293 devices. Also call the Director to see if a Volume is suitable
1294 for the current job.
1295 kes Fix some bugs in bscan. Make sure all media records are written.
1296 Make sure that valid JobMedia records are written for disk files.
1297 Previously they were completely wrong.
1298 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
1299 that the URLs don't change and so that the developers will all
1300 work off the same copy. Rebuild from scrach.
1301 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
1303 Release: 2.1.18 beta
1305 kes Fix seg fault in FD from incorrect digest size.
1306 kes Fix argument to non-OpenSSL crypto.c subroutine.
1308 Release: 2.1.16 beta
1310 kes Remove a few malloc()s from the encryption code.
1311 kes Use the class calls to bsock in filed/backup.c and restore.c in
1312 place of the old bnet_xxx code.
1313 kes Implement code that does an on the fly calculation of the
1314 signing digest during restore of encrypted files. It makes
1315 a best guess at the algorithm, and if it is not correct, will
1316 then revert to the old code which reads the file after it is
1318 kes Implement at least one missing crypto stream in stream_to_ascii()
1319 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
1320 #877 where a reload with bad syntax causes Dir to exit.
1322 Cut: 2.1.14 beta (not released)
1324 kes Do not free a volume on a tape drive until another volume is
1325 mounted and read, or the autochanger unloads the volume.
1326 This should help the SD re-use volumes that are already mounted,
1327 and should fix bug #886.
1328 kes Apply patch from user brettedgar that allows gnome2-console include
1329 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
1330 kes Apply patch from Lucien Weller that fixes day of week calculation
1331 because of DST flag problem. Fixes bug #887.
1333 kes Move find_next_appendable_volume() to after acquiring a valid device
1334 in reserve.c. This fixes bug #864 -- confirmed by reporter.
1336 kes Unable to reproduce bug 872. However added additional testing for
1338 kes Bug #874 resolved by documenting SQLite limitations.
1339 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
1340 kes Bug #881 resolved by removing typo in mtx-changer script.
1341 kes Made Frank Sweetser's wiki the official Bacula wiki with his
1342 approval. Added a link to the wiki on the web page, and implemented
1343 a backup from http://paramount.ind.wpi.edu
1345 kes Fix update allfrompool to pass pool name.
1347 kes Convert to pure GPL v2 license.
1348 kes Fix sscanf problems reported by Peter Buschman that caused
1349 a bus error on Solaris.
1350 kes Rework (simplify) the select prompt in bat.
1351 kes Move get_jobid_from_tid() into lib and create a
1353 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
1354 should definitely fix the problem of lost error messages in the
1356 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
1357 kes Eliminate tcpd.h from the project. Enclose the #include from the
1358 library with extern C ...
1359 kes Add print of signal name when a signal is trapped.
1361 Release: 2.1.12 beta
1363 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
1365 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
1366 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
1367 makes SQLit3 run 30 times faster, though a bit less safe.
1368 kes Implement --with-batch-insert in configure and detection of thread
1369 safe libraries. It is on by default, but turned off if no thread
1370 safe library (e.g. SQLite 2) is available.
1372 kes Fix Bacula PostgreSQL buffer overruns.
1373 kes Do better checking for NULL results returned from PostgreSQL;
1374 implement retry for failed queries; clear results buffer after
1375 failed query. Hopefully this will correct the PostgreSQL failures.
1377 kes Implement algorithm to handle only one appendable volume with
1378 Prefer Mounted Volumes = no.
1379 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
1380 returned from a query.
1381 kes Make volume lock recursive.
1382 kes Implement an additional volume reservation algorithm that
1383 starts by considering all reserved volumes then uses the
1384 old brute force algorithm of searching the resources to
1385 find a suitable device.
1386 kes Add new reservations debug code and refine the old code.
1387 kes Update the win32/dll/bacula.defs file.
1389 kes Tweak reservations algorithm to permit a few more cases, i.e.
1390 volume reserved, but on different drive, ...
1391 kes Enhance SD status to include Pool and Media Type for drive in a
1392 more readable format (a bit longer).
1393 kes Fix PostgreSQL double free.
1395 kes Minor refactoring of restore decryption code.
1396 kes Add code to smartall.c to detect double free of a buffer.
1398 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
1399 so that bsmtp will create a correct email address (mailbox only).
1400 kes Modify 'memory' command so that the buffers are listed as 'In use'
1401 to avoid confusion with Orphaned buffers.
1402 kes I reworked the OpenSSL include/lib flags to be handled in
1403 the standard Bacula way, which should fix bug #863 concerning
1404 non-standard OpenSSL libraries.
1406 kes Implement Help Browser window for bat.
1407 kes Fix reload bug that reset StorageId to zero.
1409 kes Fix TLS #ifdefing when TLS turned off.
1410 kes Ensure that when labelling a tape with Slot=0 that InChanger
1412 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
1414 kes Add StartTime to final uar_sel_jobid_temp query so that we can
1415 add DISTINCT (required by PostgreSQL).
1416 kes Implement BSOCK authenticate_director() method. Eventually will
1417 authenicate all daemons.
1418 kes Move several more functions into the BSOCK class.
1420 kes Add code to tell the OS that we no longer need a cached
1421 file that we were reading. In findlib/bfile.c. Also,
1422 only cache files that we are reading. Thanks to
1423 Tobias Oetiker <tobi@oetiker.ch> for the idea.
1424 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
1425 kes Implement script to automatically generate cats and dll .def
1426 files for Win32 dll.
1427 kes Update README.mingw32 to include new .def file generation.
1428 kes Correct typo in UTF-8 error message as reported by:
1429 jhernandez <julianhernandez@gmail.com>
1430 kes Add additional sm_check() code on debug level 1.
1431 kes Set default debug level to 1.
1432 kes Trap SIGABRT in attempt to get traceback.
1434 kes Reduce bat connect timeout from 30 to 15 seconds.
1435 kes More restructuring and implementing BSOCK class in place of
1437 kes Remove a few unnecessary malloc() tests in crypto code.
1438 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
1439 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
1440 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
1442 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
1444 kes Fix Verify InitCatalog. The attributes were not pointing to the
1445 correct saved location.
1446 kes Implement message callback so that GUI is sure to get all
1447 daemon messages. Currently displayed in a dialog in bat.
1448 kes Ignore SIGUSR2 (Bacula timer) in bat.
1449 kes Apply regress patch from bug #859 to allow regress to work
1450 with Solaris compiler.
1452 kes Begin adding TLS support to bat.
1453 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
1454 clean up lex.c and make it more readable.
1456 kes Move more bnet functions into the BSOCK class.
1457 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
1458 kes Complete change of berrno strerror() method to bstrerror()
1460 Release: 2.1.10 beta
1462 kes Cleanup incorrect email addresses in bsmtp.
1463 kes Make bat display initial messages rather than discard them.
1465 kes First cut of adding .mod to the run command.
1466 kes Implement auto display of messages in bat.
1467 kes Enhanced preferences to allow all Bacula output to be
1470 kes Try to make bsmtp date routines more generic.
1471 kes Fixed bug #856 autochanger documentation.
1472 kes Rework bsmtp date editing for Win32. This fixes bug #854.
1473 kes Add new cats entry point so Win32 builds.
1475 kes Attempt to fix bsmtp date editing on OSes without %z editing.
1477 kes Do better checking for the MySQL 64 bit libraries looking for both
1478 .a and .so libraries.
1479 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
1480 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
1481 kes Require the thread safe version of MySQL during configure. Thanks
1482 to Andre Noll for pointing this out.
1483 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
1484 continuing in migration code.
1485 kes Apply implementation of tray-monitor font derived from gnome-console
1486 submitted by Andreas Piesk <a.piesk@gmx.net>
1488 kes Eliminate important memory loss in SQLite
1489 kes Fixed the batch insert MySQL thread specific data that was not
1490 being freed. See cats/mysql.c:db_thread_cleanup().
1491 kes Fix restore before command.
1492 kes Convert old hdr.name to name() in a few places.
1493 kes Implement update jobid command.
1494 kes Return all time_t dates in db_get_job_record()
1495 kes Stop watchdog in SD earlier.
1496 kes Put Pool just after Storage in please mount message.
1497 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
1500 kes Update the po files.
1501 kes Fix Verify InitCatalog by making it cache attributes.
1503 kes Change name bacula-bat to bat for man 1 page to correspond to
1505 kes Check for client and store NULL pointers in status command. This
1507 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
1508 kes Fix sign extended editing of %p.
1509 kes Clean out a little old #ifdefing in cats/mysql.c
1511 kes If time diff between DIR and FD is more than 600 seconds convert
1512 INFO message to WARNING.
1513 kes Implement heap size display in status for all daemons.
1514 kes Attempt to fix MySQL db open memory loss (not successfull).
1515 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
1516 kes Eliminate memory loss in MySQL (possibly other SQLs) during
1517 Query. This looks like a MySQL but but by doing extra releases,
1518 the memory goes away. This should fix bug #847.
1520 kes When backup fails, cancel SD before waiting for sd termination.
1521 kes If SD is waiting for FD to connect during cancel, wake up the
1523 kes Fix fsf code so that errno is correctly reported.
1524 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
1526 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
1527 so that Bacula doesn't later stumble into a seg fault.
1528 kes Use the term Restore Client in the restore Job report.
1529 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
1530 the original job's FileSetId.
1531 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
1532 spooling in migration jobs. Not yet tested.
1533 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
1534 reading conf file from a pipe. However, do it with open_bpipe()
1535 rather than popen. Not yet tested.
1537 kes Fix an ugly bug where the VolCatBytes were getting updated
1539 kes Implement bconsole memory command that prints current memory
1540 usage, plus smartalloc dump.
1541 kes Clarify some error messages in backup, admin, and migrate.
1542 kes Shrink label dialog to smaller size.
1543 kes Invert Cancel OK buttons on restore to be OK Cancel.
1544 kes More strerror() to bstrerror() conversions.
1546 kes Start implementing bstrerror() in place of strerror().
1547 kes Stripping path -- seems to work.
1549 kes Prevent door and port files from being restored (mostly
1551 kes Free an unreleased buffer in compat code.
1552 kes Change console Job name from *Console* to -Console- to eliminate
1553 Win32 filename problems. Put Win32 path separator when creating
1554 Console file. This fixes bug #846.
1555 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
1557 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
1559 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
1560 to force Win32 error message.
1562 kes First cut strip path. The data should be passed to the FD,
1563 but nothing is done with it yet.
1564 kes Enhance the digest and signature routines in the crypto
1565 library to accept a JCR and to use it to print error messages
1566 so that they will go in the Job report rather than the daemon's
1568 kes Simplify some of the verify signature code.
1569 kes Simplify a few of the alternative returns in the signature
1572 ebl Use only POSIX regex instead of GNU regex in breg.c for
1573 File relocation. It fix broken freebsd compilation.
1574 kes Convert all other Dir files to use new ua class message
1576 kes Tentative fix for missing digest signature in bug 807.
1577 kes Correct handle problem in new win32_ftruncate routine.
1578 kes Convert ua_purge.c and ua_update.c to use new ua class
1579 message routines for bat.
1581 kes Correct incorrect installation of LICENSE in Win32 installer.
1582 kes Display LICENSE at the beginning of the Win32 install.
1583 kes Attempt to correct the need for the png files to be installed
1585 kes Reapply my bat.conf install script in qt-console. I think I
1586 editted bat.pro instead of bat.pro.in and it was lost.
1587 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
1588 the /var/lock/subsys for subsysdir. Also corrects typos in the
1591 kes First cut update job.
1592 kes Correct configure to include qmake of src/qt-console directory.
1594 kes Make restore job yes/mod/no print in one command so GUI works.
1595 kes First cut implementing backup and restore client.
1596 kes Correct editing in Verify output that caused a seg fault.
1598 kes Insure that bat.conf is not overwritten during installation.
1599 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
1600 while I was implementing migration in March 2006 !
1602 ebl Cleanup file relocation, using char *RegexWhere instead of
1603 char *where + bool where_use_regexp
1604 kes Update some manpages and add bat manpage.
1605 kes Make a first cut at converting bacula.spec.in for bwx-console
1607 kes Apply patch from John Goerzen to add hostname as fourth argument
1608 to make_catalog_backup script.
1609 kes Fix typos I introduced into bsmtp.c
1610 kes Make pm_strxxx() routines handle input of NULL pointer. This
1611 is to protect from NULL pointers returned from SQL databases.
1612 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
1613 kes Add more debug to FIFO code -- fix fifo regression test.
1615 kes Implement posix_fadvise in FD, and for reading spool files in SD.
1616 kes Add thread timer to bnet_connect() to break from OS if wait time
1619 kes Update Win32 build to include new files, new symbols, and
1621 kes Implement socket level heartbeat (tcp_keepidle)
1622 ebl Commit File relocation patch
1623 kes Make bat have 'make install' target.
1624 kes Warn during install if old gnome-console binary found.
1625 kes Warn during install if old wx-console binary found.
1626 kes Add -8 option to bsmtp command line to add content type utf-8.
1627 Fixes bug #809. (Character coding problem in bsmtp).
1628 kes If < is found in target (from, to, cc) then do not enclose the
1629 target in < > in bsmtp. Fixes bug #772 (malformed address).
1630 kes When printing certain items in dbcheck, stop after 300000.
1631 Fixes bug #822. (dbcheck loops).
1632 kes Incorrect status in Dir after waiting for mount with poll set.
1635 kes Extend idea of Prefer Mounted Volumes to mean a volume about
1637 kes Print waiting to reserve a device every 5 mins.
1639 kes Don't call close_part in label.c if tape and relabel.
1640 kes Don't free volume if busy in close() -- should help with
1642 ebl Fix #824 RunScript bug (After script could be execute twice)
1643 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
1644 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
1645 Add a regression script to test RunScript
1647 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
1650 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
1651 deprecated. No additional bugs will be fixed, and they will be dropped
1652 in a future release (probably 2.4.0).
1653 kes Change name of wx-console to bwx-console to make it more Bacula
1655 kes Change the name of gnome-console to bgnome-console to make it
1658 kes Some time in March, a Feature Request with patch from Jorj Bauer
1659 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
1661 The ability for the director to validate a Client (FD) CN against
1662 an arbitrary set of patterns rather than the hostname, with
1663 A new 'TLS Allowed CN' set of directives which are implemented
1664 in the Client resource. Then pattern matching is used in place
1665 of hostname matching against the Certificate's CN. As an example, we
1666 have certificates which (a) use a local CA, and (b) have a CN of the
1668 kes Add new/changed entry points to Win32 build
1669 kes Create unaccepted-projects for projects that are not accepted.
1670 kes Simplify locking in the reservations system.
1671 kes Add more debug code in reservations.
1672 kes Make sure error condition on reserving a volume is handled correctly.
1673 kes Correct handling of volume_in_use.
1674 kes Correct handling of initializing a device.
1675 kes Move handling of broadcasting releasing a device into release_device().
1676 kes Correct attaching dcr to dev so that it is only done if device
1677 is properly initiated.
1679 kes Locking debug level tweaks in SD.
1680 kes Tweak new Volume code.
1682 kes Add exec external-command [wait-seconds] to bconsole. This
1683 executes the external-command. Note! normally external-command
1684 should be enclosed in double quotes.
1685 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
1686 it should normally be off in a production system.
1688 kes Implement die command for SD so that we can force it to dump.
1689 kes Implement SD lock debug code.
1690 kes Implement new algorithm for keeping Volume list in SD. It
1691 is now owned by the device.
1693 kes Implement new code for freeing in use volumes that should
1694 resolve if not all, some of the problems of multiple drive
1695 tape conflicts described in bug 801.
1697 kes Fix gui/bacula-web/images files in svn.
1698 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
1700 ebl Fix a bug in batch mode (in string escape)
1701 kes Correct migration prune SQL typo that crept in in a
1702 recent 2.1.x change.
1704 kes Move bnet_despool() into class in bsock.c
1705 kes Modify job report to include director name and Build OS.
1706 kes Move drop root privilege and check_catalog() before fork.
1707 kes Add update database scripts (version 9 to 10) to updatedb directory.
1709 ebl Check size and age of each file after its backup to see if
1710 it has changed during backup, if 'checkfilechanges' is set.
1711 The FD will do an extra check (stat(2)) after
1712 each file backup. mtime, ctime and size are compared with
1713 'before backup' information. If time or size mismatch, an
1714 error message will be generated. You must upgrade FD to use it.
1716 kes Make database name and user configurable
1717 --with-db-name=xxx --with-db-user=xxx
1718 kes Add back database type to message.c for debugging.
1720 kes Implement dir_sql() which issues an SQL query.
1721 kes Modify bat medialist to use dir_sql() and do some minor C++
1722 formatting as well as eliminating a number of pointers, simplifing
1725 kes Fix some of the mtx-changer grep commands for tape label readers.
1726 kes Convert a number of bsendmsg into the appropriate send/warning/error
1727 message class calls.
1728 kes Suppress the using database message in the .sql command.
1729 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
1731 kes Add context menu for floating a window.
1732 kes Some minor cleanup and name changes in qt-console
1733 kes Add doing mt setblk 0 in Win32 mtx-changer.
1734 kes Apply Martin's bug fix to move definition of ENODATA for
1736 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
1737 sqlite2 and sqlite3.
1739 kes More pruning cleanup.
1740 kes Turn on wait_for_drive by default in mtx-changer.
1741 kes Turn on Batch insert code by default as it now passes regression.
1742 kes Add ./configure --enable-bat to enable building of Bat.
1743 No install yet though.
1745 kes Implement a new .sql command for bat.
1746 kes Implement code to turn off pruning in obtaining the next volume.
1747 Pruning is turned off for the status dir command, but turned on
1748 for SD requests and for the list nextvolume command.
1750 kes Correct Qmsg() that was not updated correctly when committing a
1751 previous change (probably the recent TLS patch).
1753 kes Write new subroutine is_volume_purged() that explicitly checks
1754 if the Volume is purged, and if so marks it as such. This should
1755 resolve problems reported about needing to mount twice to recycle
1757 kes Rewrite pruning algorithm to do more work in the SQL engine, and
1758 to pass a list of JobIds to be deleted to SQL. Also, minimize the
1759 amount of duplicated code.
1760 kes Do volume pruning only for the Media Type desired (reduces pruning time
1761 if multiple Media Types are in the same pool).
1762 kes Implement more detailed info in the Job report for the Bacula version
1764 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
1766 ebl Add bbatch tool to bench database and insert mode.
1767 Fix sql quote stuff in batch mode
1768 Fix sql stuff for mysql
1770 kes Correct problems with am/pm scheduling. Fixes bug #808.
1771 kes Implement new prunning code that prunes up to 1000 jobs at
1772 the same time. The same technique can be applied to a number
1773 of other prune/purge subroutines.
1774 kes Add an insanity check when starting a new tape job to ensure
1775 that the tape position has not been changed. If so fail the
1777 kes Fix Win32 build for dlls to add the folllowing:
1778 src/lib/bsock.c -- new file with new entry points
1779 src/lib/dlist.c -- new entry points
1780 src/cats/sql_create.c -- new entry point
1781 src/cats/sql_cmds.c -- new DATA item exported
1783 ebl batch mode cleanup bscan-test is ok now.
1784 kes Implement SD code to check length of disk volume before appending.
1786 kes Correct return status on db_batch... routines.
1787 kes Add call to db_write_batch_file_records() to migration code.
1788 ebl Fix AfterJob timing
1789 kes Move the checking of the database in initializion of the Director
1790 to after we drop privileges. This avoids the need for both root
1791 and bacula access to the DB.
1792 kes Correct a misplaced variable definition in src/filed/backup.c
1793 kes Correct how the new batch insert db_create_attributes_record()
1794 uses the arguments. Caused a seg fault in bscan.
1795 kes Implement lock() and unlock() methods in DEVICE class.
1796 Implement block() and set_block(xx) methods in DEVICE class.
1797 kes Modify bnet_connect() so that it uses time() to check for the
1798 wait time expiring (on some OSes, some system calls may not
1799 return immediately).
1800 kes Modify Verify to obtain the previous JobId when it is actually
1801 running rather than at schedule time (as it was in 1.38.x).
1802 kes Fix src/job.c to handle MaxWaitTime correctly. This should
1804 kes When checking pid in pid file, continue running if the pid is
1805 the same as ours. This occurs on IRIX after a system crash.
1808 kes Extend new GUI API.
1809 kes Make the ua structure a class, and implement send_msg(),
1810 error_msg(), warning_msg(), and info_msg().
1812 kes Apply fix from for building wx-console on the Mac from
1814 kes Implement new select mechanism for GUI programs.
1815 kes Reorganize initialization of stackedWidgets in bat.
1817 kes Add updated nagios plugin supplied by Christian Masopust.
1819 kes More bat implementation.
1820 kes File migrate bug with Pool Occupancy using mediaid instead
1821 of jobids. Fixes bug #795.
1822 kes Fix orphaned buffers in filed backup and verify due to
1823 crypto buffers not freed during errors. Fixes bug #789.
1824 kes Extend new GUI api code to tree commands.
1825 kes Ensure that tree and dot commands check console ACLs.
1826 kes Permit marking directory with trailing slash.
1827 kes Allow 20 console connections (instead of only 10).
1829 kes Add smartctl call to bacula-sd.conf as an example of getting
1832 kes Modify jobq.c to let simultaneous restore jobs run. This may
1833 cause them to fail if they cannot get a drive.
1834 kes Add Client Connect Wait to Storage daemon to permit users to
1835 modify the time the SD waits for a FD connection.
1837 kes Correct virtual changer check which was backwards. This caused
1838 volumes to be unloaded into slots already occupied.
1840 kes Apply Command ACL filter to JobId list in restore command.
1841 kes Correct typeo in var.c patch.
1843 kes Don't let Bacula prune File or Job records for the current Job.
1844 kes Fix variable substitution pad + inc bug reported (with patch)
1847 kes Correct SQLite log table index as reported by Luca Berra.
1849 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
1851 kes Begin implementing new comm signals for API.
1852 kes Fix a few places in lib/message.c where the open fd may
1854 kes Continue implementing lib/bsock.c (real class). Make jcr,
1855 who, host, and port private. There are new methods to access
1856 them for non-class use. This required touching a number of files.
1858 kes Add LANG=C to autoconf/randpass so it works with languages other
1859 than English. Fixes bug #788.
1861 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
1863 You will not be able to generate Include/Exclude list any more.
1864 It will be fixed soon.
1865 If you want to use this, you can apply
1866 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
1868 kes Restore of sockets created false error messages because Bacula
1869 no longer restores sockets, but the code was still trying to
1870 set the attributes on a non-existent file. Reported by a user.
1871 ebl finish RecyclePool feature
1872 Media will takes Pool.RecyclePool
1873 when moving from Scratch to a Pool or when user will do
1874 update volume=xxx frompool
1875 To use it, add RecyclePool = aPool to your Pool resource
1878 RecyclePool = Scratch
1882 kes Expand new BSOCK class adding signal() and new BNET signals.
1883 kes Begin enhancing the dot commands adding a new API function
1884 that returns more information and will make it easier
1885 to interface to the Director from a program.
1887 kes Make DEVICE fd private. Its new name is m_fd, and can be
1888 obtained with dev->fd() outside the class. This is the
1889 first of many DEVICE members to be made private.
1890 kes Implement Michael Renner's idea on having a virtual disk
1891 changer. I made some minor modifications (e.g. I did not
1892 implement the Virtual Changer directive, but simply set
1893 the Changer Command to an empty string.
1895 kes Implement a BSOCK send() method that writes the whole record
1896 in a single write() request rather than in two.
1897 ebl add update volume=xxx recyclepool=yyyy
1898 volume takes recyclepool from pool when using update volume=xxx from pool
1900 kes Fix encryption deblocking bug, which caused some restored files
1901 to be truncated. This fixes bug #763.
1902 kes Add FD event sequence order prepared by Eric -- for RunScripts.
1903 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
1905 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
1906 ebl Use btime_t instead of uint64_t in media patch.
1908 kes Optimize the use of the database a bit in the Status dir command.
1909 Only open it when needed, ensure that if any previous database
1910 was opened, it is closed.
1912 kes Correct VolCatBytes bug from media patch.
1913 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
1914 in the case of orphaned records.
1915 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
1916 and File records in 300K chunks to be more efficient. This
1917 idea came from Juan Luis Frances (if I remember right).
1918 kes Apply Eric's scratch patch that moves a purged Volume to
1919 the RecyclePool. Question: how is RecyclePool set? what
1920 happens to the ScratchPool?
1921 kes Apply Eric's media patch that collects read/write media
1922 times as well as byte counts. This patch requires a
1923 simultaneous upgrade of the DIR and SD. Note, there
1924 should be some way to turn off timing. I'm not sure
1925 times are in Bacula units.
1926 kes Apply Eric's batch-insert patch.
1928 kes Update projects list.
1930 kes Implement Include/Exclude file lists in FD as dlists using
1931 the new dlistString class. This permits efficiently having
1932 large include/exclude lists and completes project Item 25.
1933 kes Fix dird/ua_cmds.c so that a cancel command checks if the
1934 console is authorized to cancel the job. This fixes bug
1936 kes Modify SD so that the VolCatJobs medium record is updated
1937 at the beginning of a Job rather than the end. This
1938 fixes bug #775 where exceeding MaxVolJobs caused jobs
1940 kes Added a mutex around getting and setting Volume information
1941 so that multiple simultaneous jobs will single thread.
1943 Switch to using Subversion
1944 kes Remove src/pygtk-console/ from configure
1946 kes Delete src/lib/btree.c from win32 build, then add rblist.c
1947 plus the entrypoints.
1948 kes Apply patch supplied that corrects debug print
1949 in canceling jobs for max run time. Supplied as
1950 part of bug #621, which was previously fixed.
1952 kes Test on job_canceled() and sd_msg_thread_done inside
1953 loop starting the message thread to avoid a race condition.
1955 kes Remove rl_catch_signal from console.c as it conflicted
1956 with the header definition. Fixes bug #765.
1957 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
1959 kes Clarify some stored/acquire messages to indicate if the
1960 problem is with read or append.
1962 kes Fix memory leak with storage ids in cats/sql_get.c
1963 kes Terminate watchdog earlier to avoid reference to released
1964 memory -- reported by Jason Austin.
1965 kes Move closing the database from jobq.c to the director daemon
1966 termination routine. This fixes memory leaks for shadow jobs
1967 (i.e. migration jobs).
1968 kes Free up the unique jobid chain items in migrate.c. This fixes
1969 a memory leak problem.
1970 kes Convert some ugly looking for statements to use foreach_alist
1971 in findlib/find.c. This will facilitate converting the structures
1972 to use dlist (for large include/exclude lists).
1973 kes Fix a bug in the btree.c and btree.h routines, then rename them
1974 rblist and add them to be built in src/lib. Include some new
1975 methods written by Rudolf Cejka that make the code more readable
1976 (hides some of the ugly casting).
1977 kes Add set_next() and set_prev() methods which make the code much more
1978 readable. Also add a new dlistString class that facilitates storing
1979 strings in dlists. To be used in the large include/exclude lists.
1980 kes Make some trivial modifications to lib/tree.h that use rblist
1981 rather than dlist for storing the tree links. This was suggested
1982 by Rudolf Cejka. The result of this is that the restore tree now
1983 uses red-black binary trees rather than simple linked lists. This
1984 should give rather dramatic speed improvements for directories
1985 contining large numbers of directories/files (more than 10000).
1987 kes Fix maxruntime bug #621.
1989 ebl Implement the include JobID in spool file name project.
1990 kes Reorder projects file in order determined by Jan 2007 vote.
1991 kes Implement item #12 on project list -- quick release of FD by
1993 kes Fix open of SQLite3 db where user does not have write permission
1994 so that DIR does not crash. Fixes bug #761.
1996 kes Add back missing @ in Win32 Makefile.
1997 kes Change 'Device not configured to autolabel' from INFO
1999 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
2000 which should restart an indefinite # of times.
2001 kes Fix configure --help to print --with-mysql[=DIR]. Same for
2002 other DIR specifications.
2004 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
2005 Fix path quoting in SQLite scripts.
2006 Fix problems with SHGetFolderPath.
2008 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
2010 kes Fix Job restart on error bug that promotes an Inc to a Full
2011 backup. This should fix bug #755.
2012 kes Add qt-console and first cut of code.
2016 kes Fix Bacula->Documentation link on Win32 to point to index.html
2017 instead of bacula.html. Fixed bug #750.
2018 kes Return JobId in db_get_job_record() when JobId==0. This should
2020 kes Do not release source pointers when restarting a failed job.
2022 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
2023 This *should* fix bug #747.
2024 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
2027 kes Modify USTORE constructor to set an empty store_source string,
2028 and don't copy the store_source string in a cancel. Hopefully
2029 this will fix Arno's seg fault, bug #744.
2030 kes Add back code to disable conio in configure. Fixes bug #743.
2031 kes Correct the Options scanner in the FD to correctly handle
2032 SHA1 option, which was eating the next option. Reported by
2034 kes Add code to indicate when the SD is spooling, spool wait, and
2035 despooling as requested by Alan Brown.
2037 Version 2.0.0 released: 4 January 2007
projects / bacula / bacula / blob