1 Technical notes on version 2.5
9 Multiple command/console per runscript
10 console command in runscript
13 State file updated on job term
16 Duplicate Job directives
17 - Allow Duplicate Jobs
18 - Allow Higher Duplicates
19 - Cancel Queued Duplicates
20 - Cancel Running Duplicates
21 Ensure they work with RerunFailedLevels
25 Improved status commands for Bat
26 Spooling/despooling status
27 Implement ftruncate for NFS devices
28 Add long term statistics job table
34 ebl Add a sort to db_get_file_list() to improve bsr construction time.
36 kes Add a mtx-changer.conf file that is not overwritten during
37 an upgrade. It fully configures the mtx-changer script.
38 kes Clear in-use bit on vol when unused while swapping.
40 kes Remove sleep at end of ./bacula
41 kes Clear hash packet for hardlinked files correctly. This corrects
42 a long standing bug where hardlinked files selected individually
43 would occasionally not be restored.
45 kes Apply Eric's patch to ensure that autoprune does not return
46 a Volume not in the autochanger unless requested to do so.
47 kes Correct bat restore display of multiple drives. This fixes
49 kes Do find_a_volume() each time an unload is done. This
50 fixes the failure of maxvol2-test.
52 kes Add some SD debug code.
53 kes Do find_a_volume() each time an unload is done.
54 kes Apply Joao's DBI patch that adds easier configuration of DBI drivers,
55 and adds --with-db-port to ./configure.
56 kes Use Qmsg() in job.c watchdog callback.
58 kes Release main control rwlock if ABORTing.
59 kes Make watchdog connect timeout queue messages rather than sending
60 directly to avoid lock conflicts with the real thread.
61 kes Add const char in dbd.c to avoid compiler warnings.
62 kes Fix python compiler string warning. Note, IMO the GNU C++
63 compiler guys have made a *very* bad change to their compiler.
64 They now force all strings to be 'const' unless you explicitly
65 cast them, which is extremely ugly and ruins nice code as well
66 as creates a lot of useless work.
68 kes Fix mtx-changer to detect both versions of Ubuntu (Debian)
69 mt. This fixes bug #1116.
70 kes Add const in python files to reduce compiler warnings.
71 This may have to be backed out because of later compiler
73 kes Fix failure of 2drive-concurrent-test. Always read label;
74 clear_unload() only after drive is defined in acquire_for_read().
76 kes Generally clean up the manual tape loading code. The main
77 conceptual change is that when a volume is marked to be unloaded,
78 its volume name is retained, and it is only marked as unloaded
79 when either the autoloader says it is unloaded or another tape
80 is read on that drive.
82 kes Add debug code and refactor subroutine in stored/mount.c
83 kes Fix format problem in bscan output reported in bug #1105.
84 ebl Fix get_next_volume_for_append logic with autochanger
85 - use pruned volumes if found
86 - don't reset the inchanger flag after getting a recycled volume
88 Fix recycle_oldest_purged_volume to take InChanger flag in account
90 ebl Add mmap/unmmap implementation for tokyodbm under win32
92 kes Make first step toward eliminating globals from config
93 scanning. Also should be a workaround for FORTIFY_SOURCE
94 GNU C bug -- fixes bug #1042.
96 kes Apply duplicate job tests to restarted jobs.
97 kes Copy more data when restarting a job so that run
98 overrides are kept. This should fix bug #1094.
100 kes More word alignment cleanup.
101 kes Fix bug where SD did not ask operator if the device could not
102 be opened. Reported by Eric.
104 kes Add dbuser to DIR conf file (replaces user).
105 kes Add --with-db-password to ./configure
106 kes Fix regress to handle db_password.
107 ebl Add new "status storage slots" that list autochanger
109 ebl Update vtape driver to compile only under Linux.
110 ebl Fix a bug when restoring with a wrong mediatype.
112 kes Eliminate ints from conf files and structures to avoid
113 word alignment problems
115 kes Fix bug reported by Scott Barninger where the bacula script
116 refers to scripts in the wrong directory. Needed to meet the
117 requirements of recent FHS location changes.
118 ebl Disable vtape for FreeBSD.
120 ebl Modify disk-changer to check if slot contains something before
123 ebl Fix vtape on win32 and debian.
124 ebl Fix autoselect patch (cause segfault).
126 ebl Fix autoselect option broken for a while. Fix #1089. Need some
127 work with StorageId to be able to use a particular drive in a
130 ebl Rename vtape to vtape.
131 ebl Update vtape driver.
133 ebl Modify vtape driver to avoid sparse file.
134 kes Add make clean of qt-source directory during ./configure
135 kes Store last block number written to tape in DEVICE and
136 use it for testing for correct last block on EOT.
138 Release Version 2.4.0:
142 kes Make sure to clear JS_WaitMedia when operator mounts a Volume.
143 This fixes bug #1095.
145 kes Add create_postgresql_database.sql to Win32 installer. Should
146 fix problem reported by Juilio Monteiro.
147 kes Get correct slot when auto unloading a device. This fixes bug
150 kes Fix multiple media restore.
151 kes Make DEVICE Slot private and access it via a method.
152 Allows better control over when it is set and cleared.
153 kes Fix possible seg fault if SQL error.
155 kes Add Martin's fixes to argument scanning for the estimate
156 command. This fixes bug #1093.
157 kes Add debug code to SD.
158 kes Fix renaming a Volume, which used the wrong Volume name.
160 kes If operator has rewind tape, print warning, release tape and
161 try once more. If tape is positioned somewhere, something went
162 wrong, so mark the tape in error and try once more. Previously
163 this error was fatal, now it produces an error message.
164 kes Ensure correct volume name displayed during restore
165 kes Ensure that Volume is mounted for restore.
167 kes Fix a few more Coverity reported problems.
169 kes Apply Allan Black's status dir job count patch.
170 ebl Add information about IMPORT/EXPORT slots in mtx-script.
171 kes Enhance a couple of SD debug messages.
172 kes Tweak unload flag setting and ensure it is set during swap.
174 ebl Fix #1091 about bad output in estimate command.
176 kes Modify autochanger locking to attempt to avoid race
178 kes Make sure device not busy before doing label command.
179 kes Display open() errors except when polling. Previously too
180 many were suppressed. This should fix bug #1070.
181 kes Fix Win32 reparse points. Bacula will not recurse into any
182 reparse point directory, including mount points, unless the
183 directory is explicitly mentioned at the top level (same as
184 with Unix). A file that is linked to another file will be
185 backed up -- much as Unix does for hardlinked files.
186 This fixes bug #1041.
188 kes Remove double quotes from ChangeLog and ReleaseNotes
189 kes Remove StorageId test when pruning and recycling (Eric's changes).
190 kes Remove old form of locking when getting volumes -- causes deadlock.
191 kes Change bat dirstat layoutWidget to dirstatlayoutWidget to make
192 the name unique and to eliminate compile time error.
193 kes Add accurate.o to Win32 FD Makefile
195 kes Fix cats dll build on Win32 after db_update_job_end_record
196 calling sequence change.
197 ebl Switch to tokyo dbm instead of htable in accurate code
198 ebl Include tokyo dbm to bacula source tree
200 kes Fix buffer overruns detected by Coverity.
202 kes Tweak joblog display.
204 kes Implement --without-qwt
205 kes Fix layout of restore tree dialog
206 kes Add configure bat QWT libraries, so that bat can be built
207 with or without the QWT libaries.
209 ebl Add dummy tape driver for regression tests.
210 kes Make sure we unload the right slot when swapping.
212 kes Add debug times, reduce size of two-pool-changer test
214 ebl Tweak autoconf scripts for vtape
216 kes Improve SD reserve debug code.
217 kes Testing an improvement to free up volumes no longer in use.
219 kes Rework SD acquire for read to handle autochanger Volume
221 kes Implement regression that explicitly tests swapping a Volume
222 from one drive to another.
223 kes Enhance disk-changer to detect most error conditions.
224 kes Fix SD code so that it properly swaps a Volume between drives.
225 This fixes bug #1083.
227 kes Apply libdbi patch from Joao Freitas for regress and for
228 Bacula trunk. Regress now works with libdbi. Nice.
229 kes Apply .nobackup patch from bug #1077 submitted by
231 kes Apply Bastian Friedrich's patch that adds %p to edit the pool
232 name into jobs cloned via the run directive.
234 kes Prevent a Volume that is being swapped from being freed from
235 the volume list. This will most likely fix, at least partially,
237 kes Fix strippath so that it does not get a buffer overrun and crash FD.
238 This fixes bug #1078.
239 kes Remove 50 millisec wait in SD that broke debugger.
240 ebl Add MaxRunSchedTime option that specifies the maximum allowed time
241 that a job may run, counted from when the job was scheduled.
242 ebl Fix MaxWaitTime option that specifies the maximum allowed time that
243 a job may block waiting for a resource, counted from when the job starts
244 ebl Rename (add) Max(Incr|Diff|Full)WaitTime to Max(Incr|Diff|Full)RunTime
245 kes Apply patch from bug #1076 by Tullio Andreatta <t.andreatta@troppoavanti.it>
246 that implements multiple commands per line in the console when using
247 readline. Modify the default to use a semicolon as the command separator.
249 ebl Fix SQL query in migration code.
250 ebl Make accurate mode with hash disk pass regression tests
252 ebl Implement first cut of accurate backup with hash disk.
254 kes Force unload of volume when wrong volume mounted in SD.
256 kes Fix bat seg fault at termination.
257 kes Add Bacula generated version to bat about box.
260 kes Experiment with allowing multiple read jobs.
261 kes Move final volume swapping code to DCR method and
262 call it from acquire_for_read().
263 kes When wrong volume is mounted during read, unload_autochanger.
265 kes Integrate the libdbi changes from Joao Henrique Freitas
267 kes Stop searching for Volumes in SD askdir if DIR returns the
268 same volume name twice in a row.
269 kes Close bat console windows first to eliminate error message
272 kes Tweak the swap Volume from one drive to another code so that
273 it now seems to work.
274 kes Resolve several problems with recycling that broke the new
275 code (these problems are in 2.2.9 as well).
276 kes Remove the volume lock when calling the sysop code.
277 kes Don't mark a reserved volume with no writers as unused otherwise
280 kes Rework class structures for VOLRES, DCR, and DEVICE to make
281 the method names a bit more logical, and for more logically
282 handling the responsibilities.
284 kes Remove redundant code in terminating the scheduler that just
285 causes a seg fault in many cases.
286 kes Cleanup releasing a volume and make it a DCR method.
287 kes Improve algorithm for detecting pre-reserved volume and
290 kes Tweak volume swapping code so it works.
291 kes Correct name overloading in mount.c
292 kes Replace released flag in VOLRES with reserved and add access
293 methods for the VOLRES class.
294 kes Prevent volume from being released while being swapped.
295 kes Apply Bastian Friedrich's edit codes patch for the bpipe-fd
297 kes Apply Bastial Friedrich's edit pool=%p patch for run clone
299 kes Refactor parts of stored/mount.c
301 ebl Add sanity checks for VolWriteTime and VolReadTime
302 ebl Take care of bad clock changes while computing VolWriteTime
303 and VolReadTime. This should fix or limit #1066
304 kes Correct error string numbers in dird/catreq.c
305 kes Restructure reserving, acquiring, and mounting volumes. Calls to
306 autochanger are deferred for mount.c -- simplifes the code.
308 kes Do not prune any running job. It just fails the job.
309 kes Lock the volumes when changing dev->reserved_device and marking
310 the volume unused otherwise the device can get reserved by
311 another job before the volume is released, thus blocking it.
313 kes Correctly detect Ubuntu systems, and add ubuntu platform directory.
314 kes Fix bug #1063, reuse of freed ptr in list nextvol.
315 kes Release regex compile buffer in filed/job.c
316 kes Add proper type of const char in sql_create.c
317 kes Turn off debug in daemon termination routines
318 kes Move free_volume_list() before devices are freed in stored.c
319 kes Fix reference to uninitalized stack variables in bregex.c.
320 This should correct bug #1067.
322 kes Fix possible seg fault in SD when freeing a volume entry.
324 kes Implement unload_dev() before swap device.
325 ebl Add statistics prunning with option and menu
326 kes Separate unload_dev() from unload_other_device() in autochanger.c
328 kes Apply patch from bug #1069 that corrects spurious error messages
329 when ACLs enabled on SGI but no ACL exists.
330 ebl Fix small segfault in bacula-sd when debug level is 500
331 kes Modify run_program() and run_program_full_output() to use
332 call by reference for the results string. This corrects a long
333 standing problem where the address of the string may be changed
334 in the subroutine but not in the calling program.
336 kes Re-enable code to remember last volume mounted on a non-tape
338 kes Add patch supplied in bug #1068 that fixes a SD crash when using
339 a Virtual autochanger.
340 kes Generate correct JobMedia records during spooling/despooling when
341 running concurrent jobs. Thanks to Tom Ivar Helbekkmo
342 <tih@hamartun.priv.no> for excellent analysis and testing.
344 kes Tweak hash algorithm for htable using Martin Simmons idea
345 for doing a circular shift.
346 kes Remember what volume is in VTLs (previously turned off for
348 kes Analysis of JobMedia records by Tom Ivar Helbekkmo <tih@hamartun.priv.no>
349 pointed out some problems in creating JobMedia records during
350 spooling with concurrent jobs. Fix the problem by updating the
351 start file position before despooling and generate a jobmedia
352 record at the end of despooling.
354 kes Fix handling of JobMedia records during spooling and when a
355 Volume is changed without actually writing data to the Volume.
357 kes Rework certain SD locking based on gdb tracebacks of deadlocks
358 sent by Eric. This code now uses only the volume_lock() rather
359 than the reservations lock when at EOM and acquiring a new
361 kes Ensure only one exit point in several subroutines.
363 kes Implement bsock code to permit locking. Use the new code in Verify
364 in the FD to prevent the heartbeat thread from disrupting the Verify
365 data sent to the Dir.
366 kes Modify SD locking to eliminate locking the reservations system from
367 outside the system. Use the volume lock when getting media data
368 and reserving a new volume at end of media.
369 kes Add Eric's volume_unused() fix to stored.c so that Volumes found
370 when SD starts are not locked into place.
372 kes Fix error compiling runscript code on 64 bit machines.
373 kes Tweak Win32 mount point code.
374 kes Fix a couple of bugs in the accurate code (bad sscanf, buffer not
375 cleared giving bad file estimate).
376 kes Implement BIG_MALLOC in htable code. Runs 2.5 times faster for
379 kes Keep Schedule run lists in order as suggested by
382 kes Implement autostart scripts for Debian.
383 ebl Implement upgrade catalog scripts.
385 ebl Apply jobstat patch for long term statistics. Have to implement
386 purge stats command and upgrade scripts.
387 kes Fix mtx-changer.in for broken Debian mt program.
389 kes Fix large number of JobMedia records reported by Eric Bollengier.
391 kes Apply doc fix from bug #1062.
392 kes Resolve crash and improper restore wx-console Win32 restore
393 GUI. Fixes bug #1065.
394 kes Update Win32 wxWidgets to latest version.
395 kes Attempt to do correct handling of Win32 mount points. Should
397 kes Fix Win32 FD backup/restore memory leak due to improper termination
398 of BackupRead/Write. This fixes bug# 1038.
400 ebl Reduce memory usage for accurate backup, working only with ctime
401 and mtime. (not all Lstat field)
402 About 40MB for my Linux system (400.000 files)
404 kes Add dcr->reserved_volume flag that allows us to release a volume
405 even if it is not vol->released. This allows maxvol2 to work when
406 Volumes expire and we are already writing to the device (i.e. a
407 volume is pulled out from under us by another job terminating after
408 we reserve the drive).
410 ebl Permit multiple command/console per runscript definition.
411 RunScript { command = /bin/true ; command = /bin/false ... }
412 ebl Add RunsWhen = AfterVSS to runscript. You can execute a command
413 (restart an application) just after the VSS snapshot on windows.
414 kes Don't zap dcr values during release_volume() as they might
415 have the next Volume to be mounted.
416 kes Fix AIX prototype.
418 kes Second cut of drive switching during backup.
421 kes Update Win32 version of wxWidgets to most recent version.
422 kes Tweak Copy job details.
423 kes Rework dir_find_next_appendable_volume to make a bit more effort
424 to find a suitable volume before giving up.
426 kes Make ask_sysop_to_create... to return if waken from wait.
427 This helps get out of blocked conditions.
428 kes Experimental implementation of switch_device in reservations.
429 kes Implement FD version to allow easier protocol changes.
430 kes Add Plugin Options string -- not yet passed to FD.
431 kes Implement PluginOptions ACL.
433 kes Attempt to correct problems with restores with autochangers and
434 use counts going negative
435 kes Rework SD status command and implement API for bat. Implements
436 header, runing waitreservation, devices, volumes, spooling,
437 and terminated status keywords.
438 .status storage=xxx <keyword>
439 kes Clarify TLS error message by adding double quotes around name.
440 kes Simplify SD/FD status code by putting api flag in STATUS_PKT
441 kes Pass jcr to tls routines so debug messages can be handled better.
442 kes Rework jobq resource allocation code, and possibly fix a bug
443 that caused reference counts to get out of sync.
445 kes Rename fd/dir plugin to use Bacula standard underscore.
446 kes Plugin work -- bring dir up to fd level.
447 kes Start implementation of VTL code
448 kes Fix Win32 build after adding new cats subroutine.
450 kes First cut at Duplicate Job implementation.
452 kes Fix bugs in MaxFullInterval and Implement MaxDiffInterval.
453 kes Start PluginOptions string, and refactor a bit of ua_run.c
454 ebl Apply Allan patch that permit to reset recyclepool.
456 kes Test patch -- possible fix or improvement for bug #1053
457 kes Refactor FD and SD status commands to permit new API code in
458 SD, and to fix Win32 build.
459 kes Win32 build is now working.
461 kes Implement 'MaxFullInterval' and start 'MaxDiffInterval' based on
462 some ideas in patch from Scott Bailey.
463 kes Begin implementation of duplicate Job control.
464 kes Fix some of Win32 build after recent additions.
465 kes Apply patch from Frank Kardel that implements 'honor no dump flag',
466 which causes the FD to detect whether or not the OS has the
467 honor no dump bit (*BSD systems), and if so, to skip backing up
468 any file with this bit set. The feature is enabled by setting
469 'honor no dump flag = yes' in the Options section of a FileSet.
471 kes Correct po warning message with datarootdir
472 kes Implement more code in dird.c to put configuration parsing in
473 a class rather than use globals.
474 kes Restructure SD status command for implementation of bat API
477 kes Suppress incorrect 'Will not descend from x into y' messages.
478 kes Eliminate FORTIFY_CODE=2 bug, and make first cut at removing
479 daemon globals used by parser.
480 kes Apply Joao's patch to separate DB_TYPE and DB_PROG in configure.
482 kes Fix free of plugin_list when none exists.
484 ebl Apply accurate project patch.
486 ebl Fix a segfault when using strip_path option. (Use of pm_strcpy
487 on non-mempool object)
488 kes First cut of converting FD .status to work with bat API.
490 .status client=XXX header
491 .status client=XXX running
492 .status client=XXX terminated
493 kes Implement first cut of Copy Job.
494 kes Implement Catalog in Pool resource. It overrides catalog specified
495 in the Client resource.
497 kes Apply patch (with some difficulties) from Joao Henrique Freitas
498 <joaohf@gmail.com>, which adds support for libdbi as a Bacula
500 kes Add patch from Martin Schmid scm@apsag.com that checks to see if
501 ftruncate() actually works. In the case of some (cheap) NAS devices,
502 it does not, and so recycling NAS Volumes does not work. The code
503 simply unlink()s the file, then recreates it. This fixes bug #1011.
505 kes First incomplete cut of big malloc blocks for htable.
506 kes Tweak plugin code.
508 kes Plugin debug code + tweak a couple bat dialog layouts
510 kes Fix creating first JobMedia record during Migration to include
511 proper index. This caused slow restores of migrated jobs.
512 kes Temp fix to plugin name file_index.
513 kes Bacula backed up and restored a MySQL database.
515 kes Implement plugin restore.
516 kes Implement parsing of db_driver to give db_type index.
518 kes First cut of plugin restore code.
519 kes Fix bug #1047, which had a heap overrun when stripping certain paths,
520 and do not strip paths on symbolic links.
521 kes Set catalog backup database and user name from values specified on
522 the ./configure line.
523 ebl Fix #1031 about wrong pool source information in job report.
526 kes Remove a redundant jcr argument to find_files, match_files, and
528 kes Implement '.status dir header|scheduled|running|terminated' that
529 prints the requested status section. With the exception of the
530 header, the other reports have fields separated by tabs (\t).
532 kes Apply patch from Peter Much <pmc@citylink.dinoex.sub.org> that fixes
533 a resource embedded run command to find a since time if no explicit
534 since time was supplied on the command line.
535 kes Apply state-file.patch sent by Allan Black <Allan.Black@btconnect.com>
536 that updates the state file at job termination time in addition to
537 when the daemon terminates.
539 kes First version where a plugin did a backup.
540 bpipe-fd.so created a backup file, wrote a test
541 string to it, and Bacua could restore this fabricated file.
543 kes Implement DB Driver = string for the DBI driver.
544 kes Remove all old bdb_xxx.c code. Add dummy routines to bdb.c
545 kes First cut of code for loading Win32 plugin dlls. Implement
546 dlopen, dlsym, dlclose, and dlerror in src/win32/compat/compat.cpp
547 and implement a dlfcn.h file based on opengroup's definitions of
550 kes First cut plugin directives.
552 kes Apply patch from bug #1049 to prevent stripping the path on a
554 kes Attempt to fix bug #1047 where stripping a path corrupts the
555 heap. Waiting for feedback.
556 kes Correct the Mount message not to suggest labeling a new tape
557 when doing a restore. Submitted by email by John Stoffel.
558 kes Attempt to work around gcc FORTIFY_SOURCE bug that crashes the
559 FD by using casting. Reported in bug #1042.
561 kes A bit of crypto cleanup. More later.
563 Release Version 2.2.8
565 kes Apply patch from Martin to correct bug #1040, bscan sets existing
567 kes Fixed important spelling error in doc -- bug #1045.
569 ebl Fix bextract to be able to extract non-portable Win32 data to
571 kes Move initialization of read/write res lock earlier in the code.
572 This fixes the crash with a null conf file. This fixes bug
574 kes Redefine CURES in lib/parse_conf to be URES and move it all
575 into lib/parse_conf.c -- this responds to bug #1042, but does
576 not fix it. The fix is not to compile with FORTIFY_SOURCE.
577 kes Backport to 2.2.8 fix de-referencing a NULL pointer in the scanner from
578 the trunk SVN. I don't think this was reported as a bug.
580 ebl Fix a bug during tape initialization with MTSETDRVBUFFER.
582 kes Fix Win32 build with new .def files and DLL_IMP_EXP ...
584 kes Add DataDespooling and DataCommitting status (committing is
585 the last despooling).
586 kes Finish implementation of new reservations code noted below.
588 kes Fix bsnprintf for float point numbers. I broke recently when
589 parameterizing some variables. This fixes bug #1036.
590 kes Undo recent reservations changes ... will apply them later
591 when they work better.
593 ebl Fixes #1034 which cause mysql to hang the connection after 8h
594 ebl Change default statistics target of filename.name and path.path
595 fields for PostgreSQL. This speeds lookup by indexes. Thanks
597 kes A few more tweaks to new reservation code. Make sure to clear
598 vol released flag when retaking volume. When reading label and
599 label is bad mark volume unused. When recycling, mark volume
600 unused so it can be renamed.
602 kes Fix reserve_volume() so it doesn't release a volume in use
603 (i.e. a volume entry not marked released). This should be
604 the last part needed to fix bug #1018.
606 kes Move Heartbeat documentation from Job to Director resource.
607 This fixes bug #1033.
609 kes Fix existing switch drive SD code to call autochanger to release
610 any old volume. This must be done to keep the autochanger from
611 releasing subsequently newly reserved volumes in doing a close().
612 This should fix bug #1018.
613 kes Fail if attempting to get console input in batch mode. This
614 should help fail RunScript console commands that are incomplete.
615 kes First cut implementing switch_drive() in SD (not actually called).
617 kes Implement first cut running console commands in a RunScript.
619 ebl Fixes bug #1028 where 'Selection Type' option was not usable
621 ebl Fixes bug #897 and bug #1005 where bacula doesn't display runscript
624 Release Version 2.2.7
626 kes Add new free_tls() entry point so that Win32 builds.
627 kes Fix compile warning in src/lib/util.c
628 kes Fix entry point for edit_job_codes() so that Win32 builds.
629 kes Fix seg fault Frank Sweetser reports in regression testing
630 on his systems. The problem was that the original author of
631 bsnprintf.c did not take into account the side effects of
632 using ++x in the argument to a #define.
633 kes Make SD protocol backward compatible with version 2.2.x.
635 ebl Fixes bug #1015 where bacula failed to restore acl to a socket
636 because Bacula no longer restores sockets.
637 ebl Always use ignorecase fileset option on win32 FD.
639 kes Apply patch from Michael Stapelberg <michael@stapelberg.de>
640 that implements double quoting include names in conf files,
641 and also allows piping input by having the first character
642 be a vertical bar (|).
643 kes Apply patch from Bastian Friedrich <bastian.friedrich@collax.com>
644 that implement %f in RunScripts to pass the FileSet name.
645 kes Skip leading | when lex input comes from a pipe as suggested
646 by Michael Stapelberg <michael@stapelberg.de>.
648 kes Apply patch for bsmtp Win32 daylight savings time fix supplied by
649 Nerijus Baliunas <nerijus@users.sourceforge.net>
651 kes Implement Plugin Directory and plugin events.
653 kes Implement a security enhancement: TLS authentication but no
654 encryption. Enabled by setting 'TLS Authentication = yes'.
655 Note when this is on, TLS encryption is turned OFF!
657 kes This patch corrects a problem where the maximum concurrent storage
658 jobs counter gets out of sync during restore jobs causing jobs to
659 'wait on max Storage jobs'. This patch fixes bug #1009.
661 kes This patch fixes bcopy so that it produces correct Volumes.
663 kes This patch eliminates spurious output to the console during a VerifyVolume
664 job that contains encrypted data. It fixes bug #1024.
666 kes This patch prevents the 'status dir' command from trying to use a scratch
667 volume and possibly moving it from one pool to another. This patch fixes
670 kes Add new include to postgresql.c suggested by Marc Cousins so
671 that it compiles correctly with pgre version 8.3.
673 kes Fix --archivedir addition to configure. Replace it with
674 --with-archivedir in configure.in This fixes the regression
676 kes This patch fixes bug #1012 where the job is canceled because
677 of Max Run Time exceeded when the job has not yet started.
679 ebl Apply Richard Mortimer patch that fixes #1016 when there are more than
680 one 'part' to write. Instead of each part being stored on disk,
681 written to DVD, then deleted from disk, all parts are written to disk,
682 and only the last is written and deleted from disk.
683 kes This patch fixes the status command to include the formating string for
684 JS_AttrInsterting. It fixes bug #1021.
685 kes This patch should fix the Mac OS X build problem on the latest
686 Darwin, where sys/types.h was not included correctly (apparently
687 due to a change in the Mac headers). The solution was to explicitly
688 ensure that it is defined for the ./configure.
689 This patch also has a rebuild of configure that includes the Debian
690 qt4 patch to check for qmake-qt4. This patch fixes bug #1020.
691 kes This patch should ensure that queued messages to the console are
692 displayed as soon as possible. It should fix bug 1007, but has been
693 reported not to work.
695 kes This patch fixes the infinite loop when trying to increase the
696 maximum number of volumes in a Pool during the add command.
697 This patch fixes bug #1008.
699 Release Version 2.2.6
701 db Remove extra data on estimate command in joblist for bat.
703 kes Cleanup of code in SD that sets the LastWritten date. This doesn't
704 really change anything, but is the beginning of doing it *right*.
705 To do it completely right the LastWritten date must be passed to
706 the SD, but it is not yet done.
707 kes Minor tweaks to some bat restore SQL.
708 kes This patch fixes bug #1003 where putting the message output from
709 a Verify job into the catalog results in a recursive loop. The problem
710 seems to show up only with postgresql (to be verified).
711 kes Correct %x to %p in postgresql debug statement.
713 kes Fix bug #942 where lots of emails where generated when the heartbeat
714 interval was low and Bacula wanted a different tape from the one in
717 ebl Add new SD despooling attributes and Dir inserting attributes
718 job status codes in the catalog (Status table).
720 ebl Use qmake-qt4 instead of qmake when available (debian system).
722 kes Add a security warning to src/cats/make_catalog_backup.in indicating
723 that passing the password via the command line (arg 3) is insecure.
724 This responds to bug #990 (it doesn't fix it).
726 kes Set default debug_level to zero. This corrects bugs #991 and #993.
727 kes Fix a crash in bat when it cannot connect to the Director for example
728 if the Director is not running.
729 kes Remove redundant INDEX (JobId) from File table in the trunk.
731 kes Make explicit exception to GPL in LICENSE to permit linking
732 the Win32 FD with Microsoft VSS code.
733 kes Apply the Solaris package patch from
734 Masopust, Christian <christian.masopust@siemens.com>
735 kes Apply the patch to optionally add a timestamp in the debug output
736 submitted by Mariusz Czulada <manieq@wp.eu>.
738 ebl Use PQerrorMessage instead of PQresultErrorMessage in postgresql
739 backend (sql_strerror). Fixes bug #989
741 kes Apply Michael Short's <mdshort@gmail.com> Win32 regress patch.
742 It applied with no problems.
743 kes Add PATH command to SunOS part of mtx-changer.in so that sed and
745 kes Redirect stderror to stdin on mt status command in mtx-changer.in
746 since the status is returned on stderr on Solaris.
747 kes Activate Close button on tray-monitor window. This fixes
749 kes Check for NULL item in parse_conf.c before calling it. In the
750 case of Device, there is no item and this caused a seg fault when
751 Device appears in the conf file.
752 kes Add a #define __CONFIG_H when including config.h in bacula.h. This
753 avoids pulling in config.h multiple times in some new code.
755 kes Fix spurious warning message printed when creating a volume with
756 a LabelFormat. This fixes bug #976.
758 Release Version 2.2.5
760 kes Add JobId in place of Job name in all the Jmsg() output.
761 kes Correct the APP_DESC for the Win32 storage service (remove an e).
763 kes Make maxvol-test and new more strict maxvol2-test work.
764 kes Print JobId in all Jmsg() job output.
766 kes Add new SD despooling attributes and Dir inserting attributes
767 job status codes. This fixes bug 961.
768 kes Fix Win32 drive display in bat version browser. Fixes bug #962.
770 kes Fix doc issue. This fixes bug #963.
771 kes Fix listing performance problems in bat. Pointed out by
773 kes Remove old debug code.
774 kes Fix bat code that tests for Win32. This should fix bug #968
775 kes Query 5 list wrong Vol after migration. This fixes bug #960
777 ebl Fix #969 where user can't change Replace option in restore menu.
779 kes Save jcr in thread specific data (tsd) for each thread.
780 kes Make Dmsg() print JobId as -%u.
781 kes Make Jmsg, Emsg, and others automatically pickup the jobid
782 for the thread if it exists.
783 kes Remove old reservation debug jid code.
784 kes Remove get_jcr_from_tid() from OpenSSL and tls code.
785 ebl Add an option that permit to specify spool size in job
786 definition. (Applying patches/testing/spoolsize_per_job.patch).
787 You must upgrade SD and DIR at the same time.
788 dvl Add new configuration item --archivedir
789 dvl Adjust regression tests to use tmp not /tmp. This will allow
790 multiple concurrent runs of the regression tests.
792 kes Fix race condition that drops final block written to volume.
793 This happens in rare cases with multiple simultaneous jobs
794 when the Volume fills. This fixes bug #964. May be related
795 to bug #935 and possibly #903.
796 kes Eliminate more strerror() and replace with bstrerror().
797 kes Remove BSD getopt and replace with unrestricted IBM version.
798 kes Fix Win32 build for changed calling sequences.
799 kes More tweaks to the mount volume routines to get everything
800 right. Changed variable name from find to have_vol, which is
801 much easier to understand.
802 kes Enhance btimer debug code.
804 kes Fix FD->SD authorization failure, which was due to spurious
805 wakeups from a pthread_cond_timedwait(). Simply check the
806 predicate before continuing. This fixes bug #953.
807 kes Add const char where needed (more to do). Remove temp debug code.
809 kes Setup SQLite busy handler before doing queries. Fixes bug #967.
810 kes Don't overwrite error message in check_tables_version.
812 kes Unlock batch insert tables with same calls used elsewhere.
813 kes Allow starting 59 jobs a second.
814 kes Make SD session key more random.
815 kes Add retry for SQLite opening db if it fails. Probably helps
817 kes Suppress extra error messages during batch insert failure.
819 kes Add jcr to timer packets so if killed message can be sent to job.
820 kes Add JobId to all Dmsg() output.
821 kes Put some FD auth code on dbglvl rather than fixed.
822 kes Return insert attributes error message in db msg buffer to avoid
823 false error messages. Helps fix bug #966.
824 kes Separate batch init error messages. Probably helps fix bug #966.
825 kes Make SD code that contructs attribute insert check string lengths
827 kes If Dir gets an error during inserting attributes, cancel SD.
828 This reduces unnecessary error messages.
830 kes Correct search boolean for getting Volume info
831 ebl Cleanup batch insert code. Probably fixes bug #965.
832 kes Back out one small change to the reservation system (reserving a volume).
833 kes Rework how a Volume is mounted. It is now much more intelligent and
834 will always attempt to use any mounted volume if possible and reduces
835 calls to the Director asking about volumes.
837 kes Turn off some code when batch insert not enabled.
838 kes Edit FD name in connect error messages.
839 kes Rework the reservation system to take into account that the Director
840 might give us a Volume that is different from the current one being
841 used, and to ensure that we don't exceed Maximum Volume Jobs.
842 This fixes (mostly) bug #947 ' Maximum Volume Jobs = 1 produces
843 fatal error with multiple jobs running'
844 kes Add more debug code in reservation system.
845 kes Implement maxvol-test to check bug #947.
847 kes Add code to handle tray monitor separated from Win32 FD.
848 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
850 kes Add missed return in fixing verify bug -- trunk only.
851 ebl Fix a command parser issue causing a director segfault.
852 kes Fix ANSI tape labeling. Fix restoring ANSI labeled Volumes.
854 kes Increase the max block size to 4MB fixes bug #957.
855 kes ERABT if user sets min block size > max block size. Fixes bug #956.
856 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
857 is not properly mounted (recognized) during a poll.
858 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
859 Job that has differences reports Verify OK.
860 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
862 ebl Add an option to operate on all pools with update vol parameters.
863 This complete the project 20. Patch from Nigel Stepp.
864 ebl Add history support to bconsole when using readline.
865 Using Ctrl-D to exit doesn't update .bconsole_history
866 kes Modify new volume algorithm to use max MediaId for generating next
867 volume number rather than the count of Volumes. This should essentially
868 eliminate the failure rate if some volumes were deleted. Bug #921.
869 kes Begin implemention of Optimize Job Scheduling.
870 kes Implement restore callback that Dirk and I agreed on for bat
871 restore. This fixes bug #928. Restore of backup of zero files fails.
872 kes Fix SQL Catalog logging which broke with new db_escape_string
875 Release Version 2.2.4
877 kes Fix bacula_cats.def for new db_escape_string().
878 kes Increase size of name string when FD making connection to SD.
879 May fix bug #953. FD->SD connection failure.
881 kes Add code to help Dan debug 2drive-incremental-2disk test.
882 kes Add code to try to fix bug #908.
883 kes Add waits to multiple exit detection code to try to force pid
884 file to always be deleted.
885 kes Restore good dev.tar.gz to rescue set appropriate binary property.
887 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
888 trying to switch drives by checking for blocking before unblocking.
890 kes Cancel storage daemon in all cases where FD reports error. This
891 should fix virtually all cases of bug #920.
892 kes Fix db_escape_string() for MySQL which did not compile.
894 kes Fix error message that was clobbered when Dir tells SD it does not
895 have write permission on Volume. This should fix a minor point
896 in bug #942, but not the main problem.
897 kes Add code to cancel job in SD if FD connection fails. This should
899 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
900 dvl Pass jcr and db into db_escape_string() to enable better escaping
902 kes Fix migration code to get correct Volume name with multiple volumes
903 by skipping |. Fixes bug #936.
904 kes Implement patch supplied by Landon to fix bug #944 where using
905 TLS with bconsole uses 99+% of the CPU.
906 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
908 kes Move patches into patches directory.
910 ebl Fix bug #946 about 'bacula-dir -t' which doesn't works
913 ebl Using 'm' in bconsole will show messages like before,
914 and not memory usage.
915 kes Fix bug #935, and probably also bug #903 where files were not
916 restored. MediaId was not properly set in JobMedia record after
919 kes Suppress chown and chmod error messages if the FD is not running
922 kes Apply Martin Simmons' patch that should turn off the new API usage
923 when batch insert is turned off allowing building on older
925 kes Add ./configure search in qwt-qt4 for qwt package
927 kes Bacula is now free of 3rd party GPL copyrighted code!
929 kes Add guid_to_name.c/h which replace idcache.
930 kes Remove enh_fnmatch.c. Make code that references it use fnmatch.c
932 ebl Detect if new PosgreSQL batch insert API is present.
933 kes Correct incorrect mempool call causing Director crash. Occurs on
934 systems without va_copy().
935 sb Update spec files for 2.2.1 release
937 kes Fix memory pool call in ua_output.c. bug #934.
938 kes Replace fnmatch.c and fnmatch.h by modified BSD versions.
939 Add test program to fnmatch.c
941 kes Integrate patch to README.vc8 from
942 Hederer Jean-Sébastien <hedererjs@asperience.fr, had to manually
943 edit it to get it into Unix patch format.
944 kes Implement mkpath.c to replace old FSF makepath.c
946 kes Implement savecwd.h and savecwd.c. Remove FSF versions.
948 Release Version 2.2.1
950 kes Update POTFILES.in
951 kes Cleanup a few underquoted AC_DEFUNs in configure
952 kes Apply patch from Martin Simmons that adds a test for va_copy to
955 kes Fix bug #921 by increasing the number of tries to create a new volume
957 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
958 can be called multiple times. Implement a version for machines
959 without va_copy() that gets a big buffer.
961 kes Integrate more portable zone offset code into bsmtp.c
962 Submitted by Attila Fülöp.
964 kes Fix bad SD->FD return status reported by
965 (James Harper) <james.harper@bendigoit.com.au>
966 ebl Fix a bug in read_close_session which return random status
967 thanks to James Harper
969 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
970 and directory names during restore of single file/directories.
971 kes Add sanity checks to .sql command when string is empty. Hopefully
972 that will resolve Dirks Director crash.
974 kes Apply patch submitted by Martin Simmons that corrects a seg fault
975 in the bsmtp chat subroutine when debug is >= 10.
977 kes Fix Director crash when running bat SQL queries.
978 kes Add David's notes on Item 8: Copy pools.
980 kes Rework projects file to be current and ready for a vote.
981 kes Enhance lex scanner error message.
983 kes Tweak LICENSE file to mention BSD code.
984 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
985 if specified on the ./configure.
986 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
987 This class is intended to allow us to open a second bsock to the
988 Director while in the restore subdialog.
990 kes Fix configure to create bat Makefile before creating dependencies.
991 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
992 kes Add a tooltip to the tray monitor.
993 dvl Set the Director's PID file before dropping privs. This fixes
996 kes Update AUTHORs file
997 kes Increase the default max concurrent jobs to 20 in FD and SD to
998 correspond with the default .conf files.
999 kes Rewrite the Win32 service routines. This eliminates the 3 copies
1000 some different, of the same file created by RN when porting the
1002 kes Rearrange some of the Win32 directories and the placement of the files
1004 kes Set DEVELOPER flag in version.h
1006 ========================================================================
1007 Release Version 2.2.0
1009 kes Apply a second doc patch from Marc.
1010 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
1011 improves the tips section that discusses how to setup multiple
1014 kes Update bat README file.
1015 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
1016 corrects a typo in the Recycle status check in db_find_next_volume().
1017 This will probably fix a number of annoying problems with multiple
1019 kes Modify most of dird/msgchan.c to use bsock class calls rather than
1020 bnet calls -- no functionality change.
1022 kes Modify the Verify output to specify if files are missing on
1023 the Volume(s) or disk. Fixes confusion in bug #916.
1024 kes When more than one Volume is read in a migration job, the last
1025 Volume bytes reported are from the last read volume rather than
1026 the last written volume. Fixed. This fixes bug #910.
1027 kes Fix display of Recycle flag after update volume=foo recycle=yes.
1028 It previously printed New Recyle flag is: no. This fixes bug
1031 kes Correct seg fault when switching tape drives during restore.
1032 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
1033 be used until after 2.2.0 release.
1035 kes Remove fnmatch() in SD that permitted wild card specifications.
1036 This fixes bug #914.
1038 kes Fix %g in filename returned by SQL for browse tree reported by
1040 kes Fix configure so that it puts config.out in the cwd rather than
1042 kes Attempt to fix the locking problem reported by Eric in bug #906.
1043 kes Make berrno class to leave errno unchanged after constructor call.
1044 kes Make bnet_server use the heap rather than the stack to allocate
1045 its socket fd pointers to avoid a crash at termination. Problem
1046 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
1048 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
1049 and putting it in depkgs-qt along with Qt4.3.
1051 kes Rework code in acquire.c that switches drives for reading when
1052 the Media Type does not match. This should fix bug #906
1054 ebl Fix a director segfault during job setup #907
1055 kes Correct seg fault in postgresql when first operation returns no
1056 rows. Fixes Dirks File browser problem seg fault with bat.
1058 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
1059 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
1062 kes Implement PopUp YES/NO dialog for bat.
1064 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
1066 kes Correct RunScript to terminate job in FD on failure.
1067 kes Change abort_on_error and AbortJobOnError to fail_on_error
1068 and FailJobOnError in RunScripts.
1069 kes Minor tweaks of code formating in RunScripts, principally to
1070 avoid depassing 80 columns.
1072 kes Eliminate one #ifdef Win32 in bsmtp
1073 kes Implement grow tool to grow a file for testing very large databases.
1074 kes Add big-vol-test to test Bacula seeking with > 5GB.
1077 kes Modify find_next_volume() to return all values in Media record.
1078 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
1082 kes Update Release notes
1084 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
1085 Warning, in previous beta version, all media get from scratch keep their
1088 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
1089 This should fix bug #842. Made a note to look at removing the temp
1090 files at the end of the install.
1091 kes Add ability to mount and unmount a file device providing it is
1092 marked as being removable and has the appropriate mount and unmount
1093 commands defined in the Device resource. This fixes bug #830.
1094 kes When applying a storage override, release all previous storage
1095 definitions rather than just prepending the new storage.
1096 This should prevent a good deal of confusion.
1098 kes Implement ./configure search for qwt libraries.
1100 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
1101 Win32 FD. This should fix bug #893.
1102 kes Remove an unnecessary beep in Win32 init code.
1103 kes Update copyright dates in Win32 executable about boxes.
1104 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
1105 code with a BSD getopt.c and getopt.h.
1106 kes Remove sched.h from the Win32 compat directory -- not used.
1107 kes Remove the Exit menu item from the Win32 tray monitor. If you really
1108 need to shut it down, do it through the services panel or the command
1110 kes Remove some inappropriate Bacula FSFE copyrights.
1111 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
1112 kes Fix regress config non-portable test as pointed out by
1113 Florian Heigl <florian.heigl@gmail.com>
1114 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
1115 as pointed out by Florian Heigl <florian.heigl@gmail.com>
1117 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
1118 Reported by Frank Sweetser.
1122 kes Fix client-only build.
1123 kes Integrate client-only fixes for bsys (initgroups) and conio from
1124 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
1125 kes Make arguments to get_scratch_volume() in same order as other
1127 kes Rework the prune_volumes() subroutine so that after purging and
1128 no volume found in desired pool, it will check for a scratch
1129 volume. This prevents recycling the whole scratch pool.
1130 kes Add code to status storage to print boffset_t (largefile support).
1132 kes Move qwt (Graphics libarary for Qt4) to depkgs.
1133 kes You now need a --with-qwt=<dir> to be able to build bat.
1134 kes Update src/win32/cats/bacula_cats.def to include the new
1135 db_get_query_dbids() call on Win32.
1137 kes Correct a problem when selecting a scratch volume and moving
1138 it to another pool that lost some columns.
1139 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
1140 kes Enhance Autochanger error messages to include Volume and device name.
1141 kes Rework prune_volumes() code to take account of InChanger flag,
1142 and to handle recycling volumes going to the Scratch pool and
1143 current pool because the RecyclePool directive.
1144 kes Implement a better and more efficient db_get_query_dbids() to
1145 handle creating and passing back a list of DBIds.
1149 kes Start work on new more efficient DBId subroutine. First use
1150 will be for recycling volume to Scratch inchanger.
1151 kes Increase number of JobIds in pruning from 1000 to 10000.
1152 This to be replaced by above routine.
1153 kes Begin implementation of building Qt4 on Win32.
1154 kes Correct typo in fix I added for bad TLS shutdown.
1155 kes Pull 2.0.3 patches into patches directory.
1156 kes Update Release notes. Include qt-console in line count.
1157 kes Update Projects file.
1159 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
1160 bug in migration code where a job that spanned two volumes
1163 kes Implement new BST_DESPOOLING blocked state. Change from locking
1164 during despooling in SD to blocking. This means that other threads
1165 can work with the device structure, in particular the reservations
1166 system while despooling.
1168 kes Fix return in reservation message queue that missed clearing
1169 the jcr lock (implemented 26Jun07 below).
1170 kes Rename a number of dev methods to make locking function names
1172 kes Document locking in lock.c. Move lock structures to new file
1175 kes Move reservations message lock to lock jcr only this
1177 kes Move main SD locking code into lock.c (new file).
1178 kes Update Win32 build to include lock.c
1182 kes Dirk committed the qwt library code for drawing graphs in bat.
1183 kes Tweak install of qwt so that it is integrated with ./configure.
1185 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
1186 out by Eric (my typo).
1187 ebl Fix configure.in to get batch mode enable
1188 kes Return correct string from authenticate.cpp in bat when connecting
1190 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
1191 spurious line drops when using TLS.
1192 kes Do not file reparse points when restoring a file that already
1195 kes Implement Windows reparse points -- similar to directories, but
1196 we do not descend into it. This is a first cut. They seem to
1197 be backed up, but restore is not yet tested.
1198 kes Remove restore_blocking in tls code when shutting a socket to leave
1199 it in blocking mode. Hopefully this will fix the encryption bug
1200 reported by Frank Sweetser.
1201 kes When opening a file for backup, tell the OS that we are going to
1202 read it sequentially -- optimization.
1203 kes Change variable names in authenticate_director() to not conflict
1204 with member names in bat. Caused great confusion with compiler,
1207 kes Queue openssl error messages in case of comm problem.
1208 kes Do shutdown() call if socket terminated.
1209 kes Remove some duplicated code in tls.c
1210 kes Move more of the bsock member variables into private and access
1212 kes Add Frank Sweetser's tls-test to the regression suite.
1214 kes Add Swedish sv.po file
1216 kes Don't print clock skew message in FD if less than 3 seconds diff.
1217 kes Add a bit of VSS info to status client.
1218 kes Implement a first cut of Vista VSS, using Win2003 code.
1220 Release: 2.1.20 beta
1222 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
1223 loaded tape but uses first drive).
1224 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
1225 This was indeed a Win32 issue.
1227 kes Simplify search of autochanger for in-use Volume.
1228 kes Fix exit condition of check for in-use volume. kes Remove
1229 inappropriate my_postgresql_free_result() in db_close()
1231 kes Fix bad return in FD when encryption signature not found.
1232 Probably caused a crash.
1233 kes Inhibit missing encryption signature error messages for
1234 file types where no signature computed.
1235 kes Correct inverted check on autochanger in reservation system.
1236 kes Tweak debug code in autochanger reservation.
1238 kes Add some additional locking in the cats directory in subroutines
1239 that modify packet variables called from batch insert.
1240 kes Rework how dcrs are allocated. new_dcr() can now be called
1241 with an existing pointer, and it will simply clean it up.
1242 This allows the reservation system to test various different
1243 devices, and will permit easy device changes.
1244 kes A bunch of changes all over to handle new new_dcr() calling
1246 kes Work more on the Volume management in the SD. Remember Volumes
1247 for tape drives and for autochangers (even virtual disk changers).
1248 kes When looking at the Volume list to reserve a drive, handle
1249 autochanger names correctly by interating through the changer
1250 devices. Also call the Director to see if a Volume is suitable
1251 for the current job.
1252 kes Fix some bugs in bscan. Make sure all media records are written.
1253 Make sure that valid JobMedia records are written for disk files.
1254 Previously they were completely wrong.
1255 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
1256 that the URLs don't change and so that the developers will all
1257 work off the same copy. Rebuild from scrach.
1258 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
1260 Release: 2.1.18 beta
1262 kes Fix seg fault in FD from incorrect digest size.
1263 kes Fix argument to non-OpenSSL crypto.c subroutine.
1265 Release: 2.1.16 beta
1267 kes Remove a few malloc()s from the encryption code.
1268 kes Use the class calls to bsock in filed/backup.c and restore.c in
1269 place of the old bnet_xxx code.
1270 kes Implement code that does an on the fly calculation of the
1271 signing digest during restore of encrypted files. It makes
1272 a best guess at the algorithm, and if it is not correct, will
1273 then revert to the old code which reads the file after it is
1275 kes Implement at least one missing crypto stream in stream_to_ascii()
1276 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
1277 #877 where a reload with bad syntax causes Dir to exit.
1279 Cut: 2.1.14 beta (not released)
1281 kes Do not free a volume on a tape drive until another volume is
1282 mounted and read, or the autochanger unloads the volume.
1283 This should help the SD re-use volumes that are already mounted,
1284 and should fix bug #886.
1285 kes Apply patch from user brettedgar that allows gnome2-console include
1286 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
1287 kes Apply patch from Lucien Weller that fixes day of week calculation
1288 because of DST flag problem. Fixes bug #887.
1290 kes Move find_next_appendable_volume() to after acquiring a valid device
1291 in reserve.c. This fixes bug #864 -- confirmed by reporter.
1293 kes Unable to reproduce bug 872. However added additional testing for
1295 kes Bug #874 resolved by documenting SQLite limitations.
1296 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
1297 kes Bug #881 resolved by removing typo in mtx-changer script.
1298 kes Made Frank Sweetser's wiki the official Bacula wiki with his
1299 approval. Added a link to the wiki on the web page, and implemented
1300 a backup from http://paramount.ind.wpi.edu
1302 kes Fix update allfrompool to pass pool name.
1304 kes Convert to pure GPL v2 license.
1305 kes Fix sscanf problems reported by Peter Buschman that caused
1306 a bus error on Solaris.
1307 kes Rework (simplify) the select prompt in bat.
1308 kes Move get_jobid_from_tid() into lib and create a
1310 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
1311 should definitely fix the problem of lost error messages in the
1313 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
1314 kes Eliminate tcpd.h from the project. Enclose the #include from the
1315 library with extern C ...
1316 kes Add print of signal name when a signal is trapped.
1318 Release: 2.1.12 beta
1320 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
1322 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
1323 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
1324 makes SQLit3 run 30 times faster, though a bit less safe.
1325 kes Implement --with-batch-insert in configure and detection of thread
1326 safe libraries. It is on by default, but turned off if no thread
1327 safe library (e.g. SQLite 2) is available.
1329 kes Fix Bacula PostgreSQL buffer overruns.
1330 kes Do better checking for NULL results returned from PostgreSQL;
1331 implement retry for failed queries; clear results buffer after
1332 failed query. Hopefully this will correct the PostgreSQL failures.
1334 kes Implement algorithm to handle only one appendable volume with
1335 Prefer Mounted Volumes = no.
1336 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
1337 returned from a query.
1338 kes Make volume lock recursive.
1339 kes Implement an additional volume reservation algorithm that
1340 starts by considering all reserved volumes then uses the
1341 old brute force algorithm of searching the resources to
1342 find a suitable device.
1343 kes Add new reservations debug code and refine the old code.
1344 kes Update the win32/dll/bacula.defs file.
1346 kes Tweak reservations algorithm to permit a few more cases, i.e.
1347 volume reserved, but on different drive, ...
1348 kes Enhance SD status to include Pool and Media Type for drive in a
1349 more readable format (a bit longer).
1350 kes Fix PostgreSQL double free.
1352 kes Minor refactoring of restore decryption code.
1353 kes Add code to smartall.c to detect double free of a buffer.
1355 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
1356 so that bsmtp will create a correct email address (mailbox only).
1357 kes Modify 'memory' command so that the buffers are listed as 'In use'
1358 to avoid confusion with Orphaned buffers.
1359 kes I reworked the OpenSSL include/lib flags to be handled in
1360 the standard Bacula way, which should fix bug #863 concerning
1361 non-standard OpenSSL libraries.
1363 kes Implement Help Browser window for bat.
1364 kes Fix reload bug that reset StorageId to zero.
1366 kes Fix TLS #ifdefing when TLS turned off.
1367 kes Ensure that when labelling a tape with Slot=0 that InChanger
1369 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
1371 kes Add StartTime to final uar_sel_jobid_temp query so that we can
1372 add DISTINCT (required by PostgreSQL).
1373 kes Implement BSOCK authenticate_director() method. Eventually will
1374 authenicate all daemons.
1375 kes Move several more functions into the BSOCK class.
1377 kes Add code to tell the OS that we no longer need a cached
1378 file that we were reading. In findlib/bfile.c. Also,
1379 only cache files that we are reading. Thanks to
1380 Tobias Oetiker <tobi@oetiker.ch> for the idea.
1381 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
1382 kes Implement script to automatically generate cats and dll .def
1383 files for Win32 dll.
1384 kes Update README.mingw32 to include new .def file generation.
1385 kes Correct typo in UTF-8 error message as reported by:
1386 jhernandez <julianhernandez@gmail.com>
1387 kes Add additional sm_check() code on debug level 1.
1388 kes Set default debug level to 1.
1389 kes Trap SIGABRT in attempt to get traceback.
1391 kes Reduce bat connect timeout from 30 to 15 seconds.
1392 kes More restructuring and implementing BSOCK class in place of
1394 kes Remove a few unnecessary malloc() tests in crypto code.
1395 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
1396 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
1397 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
1399 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
1401 kes Fix Verify InitCatalog. The attributes were not pointing to the
1402 correct saved location.
1403 kes Implement message callback so that GUI is sure to get all
1404 daemon messages. Currently displayed in a dialog in bat.
1405 kes Ignore SIGUSR2 (Bacula timer) in bat.
1406 kes Apply regress patch from bug #859 to allow regress to work
1407 with Solaris compiler.
1409 kes Begin adding TLS support to bat.
1410 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
1411 clean up lex.c and make it more readable.
1413 kes Move more bnet functions into the BSOCK class.
1414 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
1415 kes Complete change of berrno strerror() method to bstrerror()
1417 Release: 2.1.10 beta
1419 kes Cleanup incorrect email addresses in bsmtp.
1420 kes Make bat display initial messages rather than discard them.
1422 kes First cut of adding .mod to the run command.
1423 kes Implement auto display of messages in bat.
1424 kes Enhanced preferences to allow all Bacula output to be
1427 kes Try to make bsmtp date routines more generic.
1428 kes Fixed bug #856 autochanger documentation.
1429 kes Rework bsmtp date editing for Win32. This fixes bug #854.
1430 kes Add new cats entry point so Win32 builds.
1432 kes Attempt to fix bsmtp date editing on OSes without %z editing.
1434 kes Do better checking for the MySQL 64 bit libraries looking for both
1435 .a and .so libraries.
1436 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
1437 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
1438 kes Require the thread safe version of MySQL during configure. Thanks
1439 to Andre Noll for pointing this out.
1440 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
1441 continuing in migration code.
1442 kes Apply implementation of tray-monitor font derived from gnome-console
1443 submitted by Andreas Piesk <a.piesk@gmx.net>
1445 kes Eliminate important memory loss in SQLite
1446 kes Fixed the batch insert MySQL thread specific data that was not
1447 being freed. See cats/mysql.c:db_thread_cleanup().
1448 kes Fix restore before command.
1449 kes Convert old hdr.name to name() in a few places.
1450 kes Implement update jobid command.
1451 kes Return all time_t dates in db_get_job_record()
1452 kes Stop watchdog in SD earlier.
1453 kes Put Pool just after Storage in please mount message.
1454 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
1457 kes Update the po files.
1458 kes Fix Verify InitCatalog by making it cache attributes.
1460 kes Change name bacula-bat to bat for man 1 page to correspond to
1462 kes Check for client and store NULL pointers in status command. This
1464 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
1465 kes Fix sign extended editing of %p.
1466 kes Clean out a little old #ifdefing in cats/mysql.c
1468 kes If time diff between DIR and FD is more than 600 seconds convert
1469 INFO message to WARNING.
1470 kes Implement heap size display in status for all daemons.
1471 kes Attempt to fix MySQL db open memory loss (not successfull).
1472 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
1473 kes Eliminate memory loss in MySQL (possibly other SQLs) during
1474 Query. This looks like a MySQL but but by doing extra releases,
1475 the memory goes away. This should fix bug #847.
1477 kes When backup fails, cancel SD before waiting for sd termination.
1478 kes If SD is waiting for FD to connect during cancel, wake up the
1480 kes Fix fsf code so that errno is correctly reported.
1481 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
1483 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
1484 so that Bacula doesn't later stumble into a seg fault.
1485 kes Use the term Restore Client in the restore Job report.
1486 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
1487 the original job's FileSetId.
1488 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
1489 spooling in migration jobs. Not yet tested.
1490 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
1491 reading conf file from a pipe. However, do it with open_bpipe()
1492 rather than popen. Not yet tested.
1494 kes Fix an ugly bug where the VolCatBytes were getting updated
1496 kes Implement bconsole memory command that prints current memory
1497 usage, plus smartalloc dump.
1498 kes Clarify some error messages in backup, admin, and migrate.
1499 kes Shrink label dialog to smaller size.
1500 kes Invert Cancel OK buttons on restore to be OK Cancel.
1501 kes More strerror() to bstrerror() conversions.
1503 kes Start implementing bstrerror() in place of strerror().
1504 kes Stripping path -- seems to work.
1506 kes Prevent door and port files from being restored (mostly
1508 kes Free an unreleased buffer in compat code.
1509 kes Change console Job name from *Console* to -Console- to eliminate
1510 Win32 filename problems. Put Win32 path separator when creating
1511 Console file. This fixes bug #846.
1512 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
1514 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
1516 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
1517 to force Win32 error message.
1519 kes First cut strip path. The data should be passed to the FD,
1520 but nothing is done with it yet.
1521 kes Enhance the digest and signature routines in the crypto
1522 library to accept a JCR and to use it to print error messages
1523 so that they will go in the Job report rather than the daemon's
1525 kes Simplify some of the verify signature code.
1526 kes Simplify a few of the alternative returns in the signature
1529 ebl Use only POSIX regex instead of GNU regex in breg.c for
1530 File relocation. It fix broken freebsd compilation.
1531 kes Convert all other Dir files to use new ua class message
1533 kes Tentative fix for missing digest signature in bug 807.
1534 kes Correct handle problem in new win32_ftruncate routine.
1535 kes Convert ua_purge.c and ua_update.c to use new ua class
1536 message routines for bat.
1538 kes Correct incorrect installation of LICENSE in Win32 installer.
1539 kes Display LICENSE at the beginning of the Win32 install.
1540 kes Attempt to correct the need for the png files to be installed
1542 kes Reapply my bat.conf install script in qt-console. I think I
1543 editted bat.pro instead of bat.pro.in and it was lost.
1544 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
1545 the /var/lock/subsys for subsysdir. Also corrects typos in the
1548 kes First cut update job.
1549 kes Correct configure to include qmake of src/qt-console directory.
1551 kes Make restore job yes/mod/no print in one command so GUI works.
1552 kes First cut implementing backup and restore client.
1553 kes Correct editing in Verify output that caused a seg fault.
1555 kes Insure that bat.conf is not overwritten during installation.
1556 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
1557 while I was implementing migration in March 2006 !
1559 ebl Cleanup file relocation, using char *RegexWhere instead of
1560 char *where + bool where_use_regexp
1561 kes Update some manpages and add bat manpage.
1562 kes Make a first cut at converting bacula.spec.in for bwx-console
1564 kes Apply patch from John Goerzen to add hostname as fourth argument
1565 to make_catalog_backup script.
1566 kes Fix typos I introduced into bsmtp.c
1567 kes Make pm_strxxx() routines handle input of NULL pointer. This
1568 is to protect from NULL pointers returned from SQL databases.
1569 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
1570 kes Add more debug to FIFO code -- fix fifo regression test.
1572 kes Implement posix_fadvise in FD, and for reading spool files in SD.
1573 kes Add thread timer to bnet_connect() to break from OS if wait time
1576 kes Update Win32 build to include new files, new symbols, and
1578 kes Implement socket level heartbeat (tcp_keepidle)
1579 ebl Commit File relocation patch
1580 kes Make bat have 'make install' target.
1581 kes Warn during install if old gnome-console binary found.
1582 kes Warn during install if old wx-console binary found.
1583 kes Add -8 option to bsmtp command line to add content type utf-8.
1584 Fixes bug #809. (Character coding problem in bsmtp).
1585 kes If < is found in target (from, to, cc) then do not enclose the
1586 target in < > in bsmtp. Fixes bug #772 (malformed address).
1587 kes When printing certain items in dbcheck, stop after 300000.
1588 Fixes bug #822. (dbcheck loops).
1589 kes Incorrect status in Dir after waiting for mount with poll set.
1592 kes Extend idea of Prefer Mounted Volumes to mean a volume about
1594 kes Print waiting to reserve a device every 5 mins.
1596 kes Don't call close_part in label.c if tape and relabel.
1597 kes Don't free volume if busy in close() -- should help with
1599 ebl Fix #824 RunScript bug (After script could be execute twice)
1600 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
1601 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
1602 Add a regression script to test RunScript
1604 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
1607 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
1608 deprecated. No additional bugs will be fixed, and they will be dropped
1609 in a future release (probably 2.4.0).
1610 kes Change name of wx-console to bwx-console to make it more Bacula
1612 kes Change the name of gnome-console to bgnome-console to make it
1615 kes Some time in March, a Feature Request with patch from Jorj Bauer
1616 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
1618 The ability for the director to validate a Client (FD) CN against
1619 an arbitrary set of patterns rather than the hostname, with
1620 A new 'TLS Allowed CN' set of directives which are implemented
1621 in the Client resource. Then pattern matching is used in place
1622 of hostname matching against the Certificate's CN. As an example, we
1623 have certificates which (a) use a local CA, and (b) have a CN of the
1625 kes Add new/changed entry points to Win32 build
1626 kes Create unaccepted-projects for projects that are not accepted.
1627 kes Simplify locking in the reservations system.
1628 kes Add more debug code in reservations.
1629 kes Make sure error condition on reserving a volume is handled correctly.
1630 kes Correct handling of volume_in_use.
1631 kes Correct handling of initializing a device.
1632 kes Move handling of broadcasting releasing a device into release_device().
1633 kes Correct attaching dcr to dev so that it is only done if device
1634 is properly initiated.
1636 kes Locking debug level tweaks in SD.
1637 kes Tweak new Volume code.
1639 kes Add exec external-command [wait-seconds] to bconsole. This
1640 executes the external-command. Note! normally external-command
1641 should be enclosed in double quotes.
1642 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
1643 it should normally be off in a production system.
1645 kes Implement die command for SD so that we can force it to dump.
1646 kes Implement SD lock debug code.
1647 kes Implement new algorithm for keeping Volume list in SD. It
1648 is now owned by the device.
1650 kes Implement new code for freeing in use volumes that should
1651 resolve if not all, some of the problems of multiple drive
1652 tape conflicts described in bug 801.
1654 kes Fix gui/bacula-web/images files in svn.
1655 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
1657 ebl Fix a bug in batch mode (in string escape)
1658 kes Correct migration prune SQL typo that crept in in a
1659 recent 2.1.x change.
1661 kes Move bnet_despool() into class in bsock.c
1662 kes Modify job report to include director name and Build OS.
1663 kes Move drop root privilege and check_catalog() before fork.
1664 kes Add update database scripts (version 9 to 10) to updatedb directory.
1666 ebl Check size and age of each file after its backup to see if
1667 it has changed during backup, if 'checkfilechanges' is set.
1668 The FD will do an extra check (stat(2)) after
1669 each file backup. mtime, ctime and size are compared with
1670 'before backup' information. If time or size mismatch, an
1671 error message will be generated. You must upgrade FD to use it.
1673 kes Make database name and user configurable
1674 --with-db-name=xxx --with-db-user=xxx
1675 kes Add back database type to message.c for debugging.
1677 kes Implement dir_sql() which issues an SQL query.
1678 kes Modify bat medialist to use dir_sql() and do some minor C++
1679 formatting as well as eliminating a number of pointers, simplifing
1682 kes Fix some of the mtx-changer grep commands for tape label readers.
1683 kes Convert a number of bsendmsg into the appropriate send/warning/error
1684 message class calls.
1685 kes Suppress the using database message in the .sql command.
1686 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
1688 kes Add context menu for floating a window.
1689 kes Some minor cleanup and name changes in qt-console
1690 kes Add doing mt setblk 0 in Win32 mtx-changer.
1691 kes Apply Martin's bug fix to move definition of ENODATA for
1693 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
1694 sqlite2 and sqlite3.
1696 kes More pruning cleanup.
1697 kes Turn on wait_for_drive by default in mtx-changer.
1698 kes Turn on Batch insert code by default as it now passes regression.
1699 kes Add ./configure --enable-bat to enable building of Bat.
1700 No install yet though.
1702 kes Implement a new .sql command for bat.
1703 kes Implement code to turn off pruning in obtaining the next volume.
1704 Pruning is turned off for the status dir command, but turned on
1705 for SD requests and for the list nextvolume command.
1707 kes Correct Qmsg() that was not updated correctly when committing a
1708 previous change (probably the recent TLS patch).
1710 kes Write new subroutine is_volume_purged() that explicitly checks
1711 if the Volume is purged, and if so marks it as such. This should
1712 resolve problems reported about needing to mount twice to recycle
1714 kes Rewrite pruning algorithm to do more work in the SQL engine, and
1715 to pass a list of JobIds to be deleted to SQL. Also, minimize the
1716 amount of duplicated code.
1717 kes Do volume pruning only for the Media Type desired (reduces pruning time
1718 if multiple Media Types are in the same pool).
1719 kes Implement more detailed info in the Job report for the Bacula version
1721 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
1723 ebl Add bbatch tool to bench database and insert mode.
1724 Fix sql quote stuff in batch mode
1725 Fix sql stuff for mysql
1727 kes Correct problems with am/pm scheduling. Fixes bug #808.
1728 kes Implement new prunning code that prunes up to 1000 jobs at
1729 the same time. The same technique can be applied to a number
1730 of other prune/purge subroutines.
1731 kes Add an insanity check when starting a new tape job to ensure
1732 that the tape position has not been changed. If so fail the
1734 kes Fix Win32 build for dlls to add the folllowing:
1735 src/lib/bsock.c -- new file with new entry points
1736 src/lib/dlist.c -- new entry points
1737 src/cats/sql_create.c -- new entry point
1738 src/cats/sql_cmds.c -- new DATA item exported
1740 ebl batch mode cleanup bscan-test is ok now.
1741 kes Implement SD code to check length of disk volume before appending.
1743 kes Correct return status on db_batch... routines.
1744 kes Add call to db_write_batch_file_records() to migration code.
1745 ebl Fix AfterJob timing
1746 kes Move the checking of the database in initializion of the Director
1747 to after we drop privileges. This avoids the need for both root
1748 and bacula access to the DB.
1749 kes Correct a misplaced variable definition in src/filed/backup.c
1750 kes Correct how the new batch insert db_create_attributes_record()
1751 uses the arguments. Caused a seg fault in bscan.
1752 kes Implement lock() and unlock() methods in DEVICE class.
1753 Implement block() and set_block(xx) methods in DEVICE class.
1754 kes Modify bnet_connect() so that it uses time() to check for the
1755 wait time expiring (on some OSes, some system calls may not
1756 return immediately).
1757 kes Modify Verify to obtain the previous JobId when it is actually
1758 running rather than at schedule time (as it was in 1.38.x).
1759 kes Fix src/job.c to handle MaxWaitTime correctly. This should
1761 kes When checking pid in pid file, continue running if the pid is
1762 the same as ours. This occurs on IRIX after a system crash.
1765 kes Extend new GUI API.
1766 kes Make the ua structure a class, and implement send_msg(),
1767 error_msg(), warning_msg(), and info_msg().
1769 kes Apply fix from for building wx-console on the Mac from
1771 kes Implement new select mechanism for GUI programs.
1772 kes Reorganize initialization of stackedWidgets in bat.
1774 kes Add updated nagios plugin supplied by Christian Masopust.
1776 kes More bat implementation.
1777 kes File migrate bug with Pool Occupancy using mediaid instead
1778 of jobids. Fixes bug #795.
1779 kes Fix orphaned buffers in filed backup and verify due to
1780 crypto buffers not freed during errors. Fixes bug #789.
1781 kes Extend new GUI api code to tree commands.
1782 kes Ensure that tree and dot commands check console ACLs.
1783 kes Permit marking directory with trailing slash.
1784 kes Allow 20 console connections (instead of only 10).
1786 kes Add smartctl call to bacula-sd.conf as an example of getting
1789 kes Modify jobq.c to let simultaneous restore jobs run. This may
1790 cause them to fail if they cannot get a drive.
1791 kes Add Client Connect Wait to Storage daemon to permit users to
1792 modify the time the SD waits for a FD connection.
1794 kes Correct virtual changer check which was backwards. This caused
1795 volumes to be unloaded into slots already occupied.
1797 kes Apply Command ACL filter to JobId list in restore command.
1798 kes Correct typeo in var.c patch.
1800 kes Don't let Bacula prune File or Job records for the current Job.
1801 kes Fix variable substitution pad + inc bug reported (with patch)
1804 kes Correct SQLite log table index as reported by Luca Berra.
1806 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
1808 kes Begin implementing new comm signals for API.
1809 kes Fix a few places in lib/message.c where the open fd may
1811 kes Continue implementing lib/bsock.c (real class). Make jcr,
1812 who, host, and port private. There are new methods to access
1813 them for non-class use. This required touching a number of files.
1815 kes Add LANG=C to autoconf/randpass so it works with languages other
1816 than English. Fixes bug #788.
1818 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
1820 You will not be able to generate Include/Exclude list any more.
1821 It will be fixed soon.
1822 If you want to use this, you can apply
1823 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
1825 kes Restore of sockets created false error messages because Bacula
1826 no longer restores sockets, but the code was still trying to
1827 set the attributes on a non-existent file. Reported by a user.
1828 ebl finish RecyclePool feature
1829 Media will takes Pool.RecyclePool
1830 when moving from Scratch to a Pool or when user will do
1831 update volume=xxx frompool
1832 To use it, add RecyclePool = aPool to your Pool resource
1835 RecyclePool = Scratch
1839 kes Expand new BSOCK class adding signal() and new BNET signals.
1840 kes Begin enhancing the dot commands adding a new API function
1841 that returns more information and will make it easier
1842 to interface to the Director from a program.
1844 kes Make DEVICE fd private. Its new name is m_fd, and can be
1845 obtained with dev->fd() outside the class. This is the
1846 first of many DEVICE members to be made private.
1847 kes Implement Michael Renner's idea on having a virtual disk
1848 changer. I made some minor modifications (e.g. I did not
1849 implement the Virtual Changer directive, but simply set
1850 the Changer Command to an empty string.
1852 kes Implement a BSOCK send() method that writes the whole record
1853 in a single write() request rather than in two.
1854 ebl add update volume=xxx recyclepool=yyyy
1855 volume takes recyclepool from pool when using update volume=xxx from pool
1857 kes Fix encryption deblocking bug, which caused some restored files
1858 to be truncated. This fixes bug #763.
1859 kes Add FD event sequence order prepared by Eric -- for RunScripts.
1860 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
1862 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
1863 ebl Use btime_t instead of uint64_t in media patch.
1865 kes Optimize the use of the database a bit in the Status dir command.
1866 Only open it when needed, ensure that if any previous database
1867 was opened, it is closed.
1869 kes Correct VolCatBytes bug from media patch.
1870 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
1871 in the case of orphaned records.
1872 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
1873 and File records in 300K chunks to be more efficient. This
1874 idea came from Juan Luis Frances (if I remember right).
1875 kes Apply Eric's scratch patch that moves a purged Volume to
1876 the RecyclePool. Question: how is RecyclePool set? what
1877 happens to the ScratchPool?
1878 kes Apply Eric's media patch that collects read/write media
1879 times as well as byte counts. This patch requires a
1880 simultaneous upgrade of the DIR and SD. Note, there
1881 should be some way to turn off timing. I'm not sure
1882 times are in Bacula units.
1883 kes Apply Eric's batch-insert patch.
1885 kes Update projects list.
1887 kes Implement Include/Exclude file lists in FD as dlists using
1888 the new dlistString class. This permits efficiently having
1889 large include/exclude lists and completes project Item 25.
1890 kes Fix dird/ua_cmds.c so that a cancel command checks if the
1891 console is authorized to cancel the job. This fixes bug
1893 kes Modify SD so that the VolCatJobs medium record is updated
1894 at the beginning of a Job rather than the end. This
1895 fixes bug #775 where exceeding MaxVolJobs caused jobs
1897 kes Added a mutex around getting and setting Volume information
1898 so that multiple simultaneous jobs will single thread.
1900 Switch to using Subversion
1901 kes Remove src/pygtk-console/ from configure
1903 kes Delete src/lib/btree.c from win32 build, then add rblist.c
1904 plus the entrypoints.
1905 kes Apply patch supplied that corrects debug print
1906 in canceling jobs for max run time. Supplied as
1907 part of bug #621, which was previously fixed.
1909 kes Test on job_canceled() and sd_msg_thread_done inside
1910 loop starting the message thread to avoid a race condition.
1912 kes Remove rl_catch_signal from console.c as it conflicted
1913 with the header definition. Fixes bug #765.
1914 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
1916 kes Clarify some stored/acquire messages to indicate if the
1917 problem is with read or append.
1919 kes Fix memory leak with storage ids in cats/sql_get.c
1920 kes Terminate watchdog earlier to avoid reference to released
1921 memory -- reported by Jason Austin.
1922 kes Move closing the database from jobq.c to the director daemon
1923 termination routine. This fixes memory leaks for shadow jobs
1924 (i.e. migration jobs).
1925 kes Free up the unique jobid chain items in migrate.c. This fixes
1926 a memory leak problem.
1927 kes Convert some ugly looking for statements to use foreach_alist
1928 in findlib/find.c. This will facilitate converting the structures
1929 to use dlist (for large include/exclude lists).
1930 kes Fix a bug in the btree.c and btree.h routines, then rename them
1931 rblist and add them to be built in src/lib. Include some new
1932 methods written by Rudolf Cejka that make the code more readable
1933 (hides some of the ugly casting).
1934 kes Add set_next() and set_prev() methods which make the code much more
1935 readable. Also add a new dlistString class that facilitates storing
1936 strings in dlists. To be used in the large include/exclude lists.
1937 kes Make some trivial modifications to lib/tree.h that use rblist
1938 rather than dlist for storing the tree links. This was suggested
1939 by Rudolf Cejka. The result of this is that the restore tree now
1940 uses red-black binary trees rather than simple linked lists. This
1941 should give rather dramatic speed improvements for directories
1942 contining large numbers of directories/files (more than 10000).
1944 kes Fix maxruntime bug #621.
1946 ebl Implement the include JobID in spool file name project.
1947 kes Reorder projects file in order determined by Jan 2007 vote.
1948 kes Implement item #12 on project list -- quick release of FD by
1950 kes Fix open of SQLite3 db where user does not have write permission
1951 so that DIR does not crash. Fixes bug #761.
1953 kes Add back missing @ in Win32 Makefile.
1954 kes Change 'Device not configured to autolabel' from INFO
1956 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
1957 which should restart an indefinite # of times.
1958 kes Fix configure --help to print --with-mysql[=DIR]. Same for
1959 other DIR specifications.
1961 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
1962 Fix path quoting in SQLite scripts.
1963 Fix problems with SHGetFolderPath.
1965 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
1967 kes Fix Job restart on error bug that promotes an Inc to a Full
1968 backup. This should fix bug #755.
1969 kes Add qt-console and first cut of code.
1973 kes Fix Bacula->Documentation link on Win32 to point to index.html
1974 instead of bacula.html. Fixed bug #750.
1975 kes Return JobId in db_get_job_record() when JobId==0. This should
1977 kes Do not release source pointers when restarting a failed job.
1979 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
1980 This *should* fix bug #747.
1981 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
1984 kes Modify USTORE constructor to set an empty store_source string,
1985 and don't copy the store_source string in a cancel. Hopefully
1986 this will fix Arno's seg fault, bug #744.
1987 kes Add back code to disable conio in configure. Fixes bug #743.
1988 kes Correct the Options scanner in the FD to correctly handle
1989 SHA1 option, which was eating the next option. Reported by
1991 kes Add code to indicate when the SD is spooling, spool wait, and
1992 despooling as requested by Alan Brown.
1994 Version 2.0.0 released: 4 January 2007
projects / bacula / bacula / blob