1 Technical notes on version 2.5
9 Multiple command/console per runscript
10 console command in runscript
13 State file updated on job term
16 Duplicate Job directives
17 - Allow Duplicate Jobs
18 - Allow Higher Duplicates
19 - Cancel Queued Duplicates
20 - Cancel Running Duplicates
21 Ensure they work with RerunFailedLevels
25 Improved status commands for Bat
26 Spooling/despooling status
27 Implement ftruncate for NFS devices
28 Add long term statistics job table
34 kes Changes to get read storage correct for Virtual Backup.
36 kes Remove old code from label.c
37 kes Split display_display_info() out of write_bsr_file()
38 kes do_vbackup_init() working -- i.e. bootstrap file built.
39 kes Change Bacula trademark owner from John Walker to Kern Sibbald
40 kes First non-working cut of vbackup
41 kes Correct FD heartbeat code to use volatile variable accessed by
43 kes Zero thread id with memset if on Win32 in case it is a struct.
44 kes If cannot create JobMedia record, continue to try to write eof
45 and clean up in block.c
47 kes Add code to interface OpenSSL to new Win32 pthreads code which
48 used a structure for thread_t.
50 ebl tweak bat for win32 compilation
52 ebl Remove tokyo cabinet from the source
53 ebl Update configure/autoconf to support berkeley DB
54 ebl Add a sort to db_get_file_list() to improve bsr construction time.
56 kes Add a mtx-changer.conf file that is not overwritten during
57 an upgrade. It fully configures the mtx-changer script.
58 kes Clear in-use bit on vol when unused while swapping.
60 kes Remove sleep at end of ./bacula
61 kes Clear hash packet for hardlinked files correctly. This corrects
62 a long standing bug where hardlinked files selected individually
63 would occasionally not be restored.
65 kes Apply Eric's patch to ensure that autoprune does not return
66 a Volume not in the autochanger unless requested to do so.
67 kes Correct bat restore display of multiple drives. This fixes
69 kes Do find_a_volume() each time an unload is done. This
70 fixes the failure of maxvol2-test.
72 kes Add some SD debug code.
73 kes Do find_a_volume() each time an unload is done.
74 kes Apply Joao's DBI patch that adds easier configuration of DBI drivers,
75 and adds --with-db-port to ./configure.
76 kes Use Qmsg() in job.c watchdog callback.
78 kes Release main control rwlock if ABORTing.
79 kes Make watchdog connect timeout queue messages rather than sending
80 directly to avoid lock conflicts with the real thread.
81 kes Add const char in dbd.c to avoid compiler warnings.
82 kes Fix python compiler string warning. Note, IMO the GNU C++
83 compiler guys have made a *very* bad change to their compiler.
84 They now force all strings to be 'const' unless you explicitly
85 cast them, which is extremely ugly and ruins nice code as well
86 as creates a lot of useless work.
88 kes Fix mtx-changer to detect both versions of Ubuntu (Debian)
89 mt. This fixes bug #1116.
90 kes Add const in python files to reduce compiler warnings.
91 This may have to be backed out because of later compiler
93 kes Fix failure of 2drive-concurrent-test. Always read label;
94 clear_unload() only after drive is defined in acquire_for_read().
96 kes Generally clean up the manual tape loading code. The main
97 conceptual change is that when a volume is marked to be unloaded,
98 its volume name is retained, and it is only marked as unloaded
99 when either the autoloader says it is unloaded or another tape
100 is read on that drive.
102 kes Add debug code and refactor subroutine in stored/mount.c
103 kes Fix format problem in bscan output reported in bug #1105.
104 ebl Fix get_next_volume_for_append logic with autochanger
105 - use pruned volumes if found
106 - don't reset the inchanger flag after getting a recycled volume
108 Fix recycle_oldest_purged_volume to take InChanger flag in account
110 ebl Add mmap/unmmap implementation for tokyodbm under win32
112 kes Make first step toward eliminating globals from config
113 scanning. Also should be a workaround for FORTIFY_SOURCE
114 GNU C bug -- fixes bug #1042.
116 kes Apply duplicate job tests to restarted jobs.
117 kes Copy more data when restarting a job so that run
118 overrides are kept. This should fix bug #1094.
120 kes More word alignment cleanup.
121 kes Fix bug where SD did not ask operator if the device could not
122 be opened. Reported by Eric.
124 kes Add dbuser to DIR conf file (replaces user).
125 kes Add --with-db-password to ./configure
126 kes Fix regress to handle db_password.
127 ebl Add new "status storage slots" that list autochanger
129 ebl Update vtape driver to compile only under Linux.
130 ebl Fix a bug when restoring with a wrong mediatype.
132 kes Eliminate ints from conf files and structures to avoid
133 word alignment problems
135 kes Fix bug reported by Scott Barninger where the bacula script
136 refers to scripts in the wrong directory. Needed to meet the
137 requirements of recent FHS location changes.
138 ebl Disable vtape for FreeBSD.
140 ebl Modify disk-changer to check if slot contains something before
143 ebl Fix vtape on win32 and debian.
144 ebl Fix autoselect patch (cause segfault).
146 ebl Fix autoselect option broken for a while. Fix #1089. Need some
147 work with StorageId to be able to use a particular drive in a
150 ebl Rename vtape to vtape.
151 ebl Update vtape driver.
153 ebl Modify vtape driver to avoid sparse file.
154 kes Add make clean of qt-source directory during ./configure
155 kes Store last block number written to tape in DEVICE and
156 use it for testing for correct last block on EOT.
158 Release Version 2.4.0:
162 kes Make sure to clear JS_WaitMedia when operator mounts a Volume.
163 This fixes bug #1095.
165 kes Add create_postgresql_database.sql to Win32 installer. Should
166 fix problem reported by Juilio Monteiro.
167 kes Get correct slot when auto unloading a device. This fixes bug
170 kes Fix multiple media restore.
171 kes Make DEVICE Slot private and access it via a method.
172 Allows better control over when it is set and cleared.
173 kes Fix possible seg fault if SQL error.
175 kes Add Martin's fixes to argument scanning for the estimate
176 command. This fixes bug #1093.
177 kes Add debug code to SD.
178 kes Fix renaming a Volume, which used the wrong Volume name.
180 kes If operator has rewind tape, print warning, release tape and
181 try once more. If tape is positioned somewhere, something went
182 wrong, so mark the tape in error and try once more. Previously
183 this error was fatal, now it produces an error message.
184 kes Ensure correct volume name displayed during restore
185 kes Ensure that Volume is mounted for restore.
187 kes Fix a few more Coverity reported problems.
189 kes Apply Allan Black's status dir job count patch.
190 ebl Add information about IMPORT/EXPORT slots in mtx-script.
191 kes Enhance a couple of SD debug messages.
192 kes Tweak unload flag setting and ensure it is set during swap.
194 ebl Fix #1091 about bad output in estimate command.
196 kes Modify autochanger locking to attempt to avoid race
198 kes Make sure device not busy before doing label command.
199 kes Display open() errors except when polling. Previously too
200 many were suppressed. This should fix bug #1070.
201 kes Fix Win32 reparse points. Bacula will not recurse into any
202 reparse point directory, including mount points, unless the
203 directory is explicitly mentioned at the top level (same as
204 with Unix). A file that is linked to another file will be
205 backed up -- much as Unix does for hardlinked files.
206 This fixes bug #1041.
208 kes Remove double quotes from ChangeLog and ReleaseNotes
209 kes Remove StorageId test when pruning and recycling (Eric's changes).
210 kes Remove old form of locking when getting volumes -- causes deadlock.
211 kes Change bat dirstat layoutWidget to dirstatlayoutWidget to make
212 the name unique and to eliminate compile time error.
213 kes Add accurate.o to Win32 FD Makefile
215 kes Fix cats dll build on Win32 after db_update_job_end_record
216 calling sequence change.
217 ebl Switch to tokyo dbm instead of htable in accurate code
218 ebl Include tokyo dbm to bacula source tree
220 kes Fix buffer overruns detected by Coverity.
222 kes Tweak joblog display.
224 kes Implement --without-qwt
225 kes Fix layout of restore tree dialog
226 kes Add configure bat QWT libraries, so that bat can be built
227 with or without the QWT libaries.
229 ebl Add dummy tape driver for regression tests.
230 kes Make sure we unload the right slot when swapping.
232 kes Add debug times, reduce size of two-pool-changer test
234 ebl Tweak autoconf scripts for vtape
236 kes Improve SD reserve debug code.
237 kes Testing an improvement to free up volumes no longer in use.
239 kes Rework SD acquire for read to handle autochanger Volume
241 kes Implement regression that explicitly tests swapping a Volume
242 from one drive to another.
243 kes Enhance disk-changer to detect most error conditions.
244 kes Fix SD code so that it properly swaps a Volume between drives.
245 This fixes bug #1083.
247 kes Apply libdbi patch from Joao Freitas for regress and for
248 Bacula trunk. Regress now works with libdbi. Nice.
249 kes Apply .nobackup patch from bug #1077 submitted by
251 kes Apply Bastian Friedrich's patch that adds %p to edit the pool
252 name into jobs cloned via the run directive.
254 kes Prevent a Volume that is being swapped from being freed from
255 the volume list. This will most likely fix, at least partially,
257 kes Fix strippath so that it does not get a buffer overrun and crash FD.
258 This fixes bug #1078.
259 kes Remove 50 millisec wait in SD that broke debugger.
260 ebl Add MaxRunSchedTime option that specifies the maximum allowed time
261 that a job may run, counted from when the job was scheduled.
262 ebl Fix MaxWaitTime option that specifies the maximum allowed time that
263 a job may block waiting for a resource, counted from when the job starts
264 ebl Rename (add) Max(Incr|Diff|Full)WaitTime to Max(Incr|Diff|Full)RunTime
265 kes Apply patch from bug #1076 by Tullio Andreatta <t.andreatta@troppoavanti.it>
266 that implements multiple commands per line in the console when using
267 readline. Modify the default to use a semicolon as the command separator.
269 ebl Fix SQL query in migration code.
270 ebl Make accurate mode with hash disk pass regression tests
272 ebl Implement first cut of accurate backup with hash disk.
274 kes Force unload of volume when wrong volume mounted in SD.
276 kes Fix bat seg fault at termination.
277 kes Add Bacula generated version to bat about box.
280 kes Experiment with allowing multiple read jobs.
281 kes Move final volume swapping code to DCR method and
282 call it from acquire_for_read().
283 kes When wrong volume is mounted during read, unload_autochanger.
285 kes Integrate the libdbi changes from Joao Henrique Freitas
287 kes Stop searching for Volumes in SD askdir if DIR returns the
288 same volume name twice in a row.
289 kes Close bat console windows first to eliminate error message
292 kes Tweak the swap Volume from one drive to another code so that
293 it now seems to work.
294 kes Resolve several problems with recycling that broke the new
295 code (these problems are in 2.2.9 as well).
296 kes Remove the volume lock when calling the sysop code.
297 kes Don't mark a reserved volume with no writers as unused otherwise
300 kes Rework class structures for VOLRES, DCR, and DEVICE to make
301 the method names a bit more logical, and for more logically
302 handling the responsibilities.
304 kes Remove redundant code in terminating the scheduler that just
305 causes a seg fault in many cases.
306 kes Cleanup releasing a volume and make it a DCR method.
307 kes Improve algorithm for detecting pre-reserved volume and
310 kes Tweak volume swapping code so it works.
311 kes Correct name overloading in mount.c
312 kes Replace released flag in VOLRES with reserved and add access
313 methods for the VOLRES class.
314 kes Prevent volume from being released while being swapped.
315 kes Apply Bastian Friedrich's edit codes patch for the bpipe-fd
317 kes Apply Bastial Friedrich's edit pool=%p patch for run clone
319 kes Refactor parts of stored/mount.c
321 ebl Add sanity checks for VolWriteTime and VolReadTime
322 ebl Take care of bad clock changes while computing VolWriteTime
323 and VolReadTime. This should fix or limit #1066
324 kes Correct error string numbers in dird/catreq.c
325 kes Restructure reserving, acquiring, and mounting volumes. Calls to
326 autochanger are deferred for mount.c -- simplifes the code.
328 kes Do not prune any running job. It just fails the job.
329 kes Lock the volumes when changing dev->reserved_device and marking
330 the volume unused otherwise the device can get reserved by
331 another job before the volume is released, thus blocking it.
333 kes Correctly detect Ubuntu systems, and add ubuntu platform directory.
334 kes Fix bug #1063, reuse of freed ptr in list nextvol.
335 kes Release regex compile buffer in filed/job.c
336 kes Add proper type of const char in sql_create.c
337 kes Turn off debug in daemon termination routines
338 kes Move free_volume_list() before devices are freed in stored.c
339 kes Fix reference to uninitalized stack variables in bregex.c.
340 This should correct bug #1067.
342 kes Fix possible seg fault in SD when freeing a volume entry.
344 kes Implement unload_dev() before swap device.
345 ebl Add statistics prunning with option and menu
346 kes Separate unload_dev() from unload_other_device() in autochanger.c
348 kes Apply patch from bug #1069 that corrects spurious error messages
349 when ACLs enabled on SGI but no ACL exists.
350 ebl Fix small segfault in bacula-sd when debug level is 500
351 kes Modify run_program() and run_program_full_output() to use
352 call by reference for the results string. This corrects a long
353 standing problem where the address of the string may be changed
354 in the subroutine but not in the calling program.
356 kes Re-enable code to remember last volume mounted on a non-tape
358 kes Add patch supplied in bug #1068 that fixes a SD crash when using
359 a Virtual autochanger.
360 kes Generate correct JobMedia records during spooling/despooling when
361 running concurrent jobs. Thanks to Tom Ivar Helbekkmo
362 <tih@hamartun.priv.no> for excellent analysis and testing.
364 kes Tweak hash algorithm for htable using Martin Simmons idea
365 for doing a circular shift.
366 kes Remember what volume is in VTLs (previously turned off for
368 kes Analysis of JobMedia records by Tom Ivar Helbekkmo <tih@hamartun.priv.no>
369 pointed out some problems in creating JobMedia records during
370 spooling with concurrent jobs. Fix the problem by updating the
371 start file position before despooling and generate a jobmedia
372 record at the end of despooling.
374 kes Fix handling of JobMedia records during spooling and when a
375 Volume is changed without actually writing data to the Volume.
377 kes Rework certain SD locking based on gdb tracebacks of deadlocks
378 sent by Eric. This code now uses only the volume_lock() rather
379 than the reservations lock when at EOM and acquiring a new
381 kes Ensure only one exit point in several subroutines.
383 kes Implement bsock code to permit locking. Use the new code in Verify
384 in the FD to prevent the heartbeat thread from disrupting the Verify
385 data sent to the Dir.
386 kes Modify SD locking to eliminate locking the reservations system from
387 outside the system. Use the volume lock when getting media data
388 and reserving a new volume at end of media.
389 kes Add Eric's volume_unused() fix to stored.c so that Volumes found
390 when SD starts are not locked into place.
392 kes Fix error compiling runscript code on 64 bit machines.
393 kes Tweak Win32 mount point code.
394 kes Fix a couple of bugs in the accurate code (bad sscanf, buffer not
395 cleared giving bad file estimate).
396 kes Implement BIG_MALLOC in htable code. Runs 2.5 times faster for
399 kes Keep Schedule run lists in order as suggested by
402 kes Implement autostart scripts for Debian.
403 ebl Implement upgrade catalog scripts.
405 ebl Apply jobstat patch for long term statistics. Have to implement
406 purge stats command and upgrade scripts.
407 kes Fix mtx-changer.in for broken Debian mt program.
409 kes Fix large number of JobMedia records reported by Eric Bollengier.
411 kes Apply doc fix from bug #1062.
412 kes Resolve crash and improper restore wx-console Win32 restore
413 GUI. Fixes bug #1065.
414 kes Update Win32 wxWidgets to latest version.
415 kes Attempt to do correct handling of Win32 mount points. Should
417 kes Fix Win32 FD backup/restore memory leak due to improper termination
418 of BackupRead/Write. This fixes bug# 1038.
420 ebl Reduce memory usage for accurate backup, working only with ctime
421 and mtime. (not all Lstat field)
422 About 40MB for my Linux system (400.000 files)
424 kes Add dcr->reserved_volume flag that allows us to release a volume
425 even if it is not vol->released. This allows maxvol2 to work when
426 Volumes expire and we are already writing to the device (i.e. a
427 volume is pulled out from under us by another job terminating after
428 we reserve the drive).
430 ebl Permit multiple command/console per runscript definition.
431 RunScript { command = /bin/true ; command = /bin/false ... }
432 ebl Add RunsWhen = AfterVSS to runscript. You can execute a command
433 (restart an application) just after the VSS snapshot on windows.
434 kes Don't zap dcr values during release_volume() as they might
435 have the next Volume to be mounted.
436 kes Fix AIX prototype.
438 kes Second cut of drive switching during backup.
441 kes Update Win32 version of wxWidgets to most recent version.
442 kes Tweak Copy job details.
443 kes Rework dir_find_next_appendable_volume to make a bit more effort
444 to find a suitable volume before giving up.
446 kes Make ask_sysop_to_create... to return if waken from wait.
447 This helps get out of blocked conditions.
448 kes Experimental implementation of switch_device in reservations.
449 kes Implement FD version to allow easier protocol changes.
450 kes Add Plugin Options string -- not yet passed to FD.
451 kes Implement PluginOptions ACL.
453 kes Attempt to correct problems with restores with autochangers and
454 use counts going negative
455 kes Rework SD status command and implement API for bat. Implements
456 header, runing waitreservation, devices, volumes, spooling,
457 and terminated status keywords.
458 .status storage=xxx <keyword>
459 kes Clarify TLS error message by adding double quotes around name.
460 kes Simplify SD/FD status code by putting api flag in STATUS_PKT
461 kes Pass jcr to tls routines so debug messages can be handled better.
462 kes Rework jobq resource allocation code, and possibly fix a bug
463 that caused reference counts to get out of sync.
465 kes Rename fd/dir plugin to use Bacula standard underscore.
466 kes Plugin work -- bring dir up to fd level.
467 kes Start implementation of VTL code
468 kes Fix Win32 build after adding new cats subroutine.
470 kes First cut at Duplicate Job implementation.
472 kes Fix bugs in MaxFullInterval and Implement MaxDiffInterval.
473 kes Start PluginOptions string, and refactor a bit of ua_run.c
474 ebl Apply Allan patch that permit to reset recyclepool.
476 kes Test patch -- possible fix or improvement for bug #1053
477 kes Refactor FD and SD status commands to permit new API code in
478 SD, and to fix Win32 build.
479 kes Win32 build is now working.
481 kes Implement 'MaxFullInterval' and start 'MaxDiffInterval' based on
482 some ideas in patch from Scott Bailey.
483 kes Begin implementation of duplicate Job control.
484 kes Fix some of Win32 build after recent additions.
485 kes Apply patch from Frank Kardel that implements 'honor no dump flag',
486 which causes the FD to detect whether or not the OS has the
487 honor no dump bit (*BSD systems), and if so, to skip backing up
488 any file with this bit set. The feature is enabled by setting
489 'honor no dump flag = yes' in the Options section of a FileSet.
491 kes Correct po warning message with datarootdir
492 kes Implement more code in dird.c to put configuration parsing in
493 a class rather than use globals.
494 kes Restructure SD status command for implementation of bat API
497 kes Suppress incorrect 'Will not descend from x into y' messages.
498 kes Eliminate FORTIFY_CODE=2 bug, and make first cut at removing
499 daemon globals used by parser.
500 kes Apply Joao's patch to separate DB_TYPE and DB_PROG in configure.
502 kes Fix free of plugin_list when none exists.
504 ebl Apply accurate project patch.
506 ebl Fix a segfault when using strip_path option. (Use of pm_strcpy
507 on non-mempool object)
508 kes First cut of converting FD .status to work with bat API.
510 .status client=XXX header
511 .status client=XXX running
512 .status client=XXX terminated
513 kes Implement first cut of Copy Job.
514 kes Implement Catalog in Pool resource. It overrides catalog specified
515 in the Client resource.
517 kes Apply patch (with some difficulties) from Joao Henrique Freitas
518 <joaohf@gmail.com>, which adds support for libdbi as a Bacula
520 kes Add patch from Martin Schmid scm@apsag.com that checks to see if
521 ftruncate() actually works. In the case of some (cheap) NAS devices,
522 it does not, and so recycling NAS Volumes does not work. The code
523 simply unlink()s the file, then recreates it. This fixes bug #1011.
525 kes First incomplete cut of big malloc blocks for htable.
526 kes Tweak plugin code.
528 kes Plugin debug code + tweak a couple bat dialog layouts
530 kes Fix creating first JobMedia record during Migration to include
531 proper index. This caused slow restores of migrated jobs.
532 kes Temp fix to plugin name file_index.
533 kes Bacula backed up and restored a MySQL database.
535 kes Implement plugin restore.
536 kes Implement parsing of db_driver to give db_type index.
538 kes First cut of plugin restore code.
539 kes Fix bug #1047, which had a heap overrun when stripping certain paths,
540 and do not strip paths on symbolic links.
541 kes Set catalog backup database and user name from values specified on
542 the ./configure line.
543 ebl Fix #1031 about wrong pool source information in job report.
546 kes Remove a redundant jcr argument to find_files, match_files, and
548 kes Implement '.status dir header|scheduled|running|terminated' that
549 prints the requested status section. With the exception of the
550 header, the other reports have fields separated by tabs (\t).
552 kes Apply patch from Peter Much <pmc@citylink.dinoex.sub.org> that fixes
553 a resource embedded run command to find a since time if no explicit
554 since time was supplied on the command line.
555 kes Apply state-file.patch sent by Allan Black <Allan.Black@btconnect.com>
556 that updates the state file at job termination time in addition to
557 when the daemon terminates.
559 kes First version where a plugin did a backup.
560 bpipe-fd.so created a backup file, wrote a test
561 string to it, and Bacua could restore this fabricated file.
563 kes Implement DB Driver = string for the DBI driver.
564 kes Remove all old bdb_xxx.c code. Add dummy routines to bdb.c
565 kes First cut of code for loading Win32 plugin dlls. Implement
566 dlopen, dlsym, dlclose, and dlerror in src/win32/compat/compat.cpp
567 and implement a dlfcn.h file based on opengroup's definitions of
570 kes First cut plugin directives.
572 kes Apply patch from bug #1049 to prevent stripping the path on a
574 kes Attempt to fix bug #1047 where stripping a path corrupts the
575 heap. Waiting for feedback.
576 kes Correct the Mount message not to suggest labeling a new tape
577 when doing a restore. Submitted by email by John Stoffel.
578 kes Attempt to work around gcc FORTIFY_SOURCE bug that crashes the
579 FD by using casting. Reported in bug #1042.
581 kes A bit of crypto cleanup. More later.
583 Release Version 2.2.8
585 kes Apply patch from Martin to correct bug #1040, bscan sets existing
587 kes Fixed important spelling error in doc -- bug #1045.
589 ebl Fix bextract to be able to extract non-portable Win32 data to
591 kes Move initialization of read/write res lock earlier in the code.
592 This fixes the crash with a null conf file. This fixes bug
594 kes Redefine CURES in lib/parse_conf to be URES and move it all
595 into lib/parse_conf.c -- this responds to bug #1042, but does
596 not fix it. The fix is not to compile with FORTIFY_SOURCE.
597 kes Backport to 2.2.8 fix de-referencing a NULL pointer in the scanner from
598 the trunk SVN. I don't think this was reported as a bug.
600 ebl Fix a bug during tape initialization with MTSETDRVBUFFER.
602 kes Fix Win32 build with new .def files and DLL_IMP_EXP ...
604 kes Add DataDespooling and DataCommitting status (committing is
605 the last despooling).
606 kes Finish implementation of new reservations code noted below.
608 kes Fix bsnprintf for float point numbers. I broke recently when
609 parameterizing some variables. This fixes bug #1036.
610 kes Undo recent reservations changes ... will apply them later
611 when they work better.
613 ebl Fixes #1034 which cause mysql to hang the connection after 8h
614 ebl Change default statistics target of filename.name and path.path
615 fields for PostgreSQL. This speeds lookup by indexes. Thanks
617 kes A few more tweaks to new reservation code. Make sure to clear
618 vol released flag when retaking volume. When reading label and
619 label is bad mark volume unused. When recycling, mark volume
620 unused so it can be renamed.
622 kes Fix reserve_volume() so it doesn't release a volume in use
623 (i.e. a volume entry not marked released). This should be
624 the last part needed to fix bug #1018.
626 kes Move Heartbeat documentation from Job to Director resource.
627 This fixes bug #1033.
629 kes Fix existing switch drive SD code to call autochanger to release
630 any old volume. This must be done to keep the autochanger from
631 releasing subsequently newly reserved volumes in doing a close().
632 This should fix bug #1018.
633 kes Fail if attempting to get console input in batch mode. This
634 should help fail RunScript console commands that are incomplete.
635 kes First cut implementing switch_drive() in SD (not actually called).
637 kes Implement first cut running console commands in a RunScript.
639 ebl Fixes bug #1028 where 'Selection Type' option was not usable
641 ebl Fixes bug #897 and bug #1005 where bacula doesn't display runscript
644 Release Version 2.2.7
646 kes Add new free_tls() entry point so that Win32 builds.
647 kes Fix compile warning in src/lib/util.c
648 kes Fix entry point for edit_job_codes() so that Win32 builds.
649 kes Fix seg fault Frank Sweetser reports in regression testing
650 on his systems. The problem was that the original author of
651 bsnprintf.c did not take into account the side effects of
652 using ++x in the argument to a #define.
653 kes Make SD protocol backward compatible with version 2.2.x.
655 ebl Fixes bug #1015 where bacula failed to restore acl to a socket
656 because Bacula no longer restores sockets.
657 ebl Always use ignorecase fileset option on win32 FD.
659 kes Apply patch from Michael Stapelberg <michael@stapelberg.de>
660 that implements double quoting include names in conf files,
661 and also allows piping input by having the first character
662 be a vertical bar (|).
663 kes Apply patch from Bastian Friedrich <bastian.friedrich@collax.com>
664 that implement %f in RunScripts to pass the FileSet name.
665 kes Skip leading | when lex input comes from a pipe as suggested
666 by Michael Stapelberg <michael@stapelberg.de>.
668 kes Apply patch for bsmtp Win32 daylight savings time fix supplied by
669 Nerijus Baliunas <nerijus@users.sourceforge.net>
671 kes Implement Plugin Directory and plugin events.
673 kes Implement a security enhancement: TLS authentication but no
674 encryption. Enabled by setting 'TLS Authentication = yes'.
675 Note when this is on, TLS encryption is turned OFF!
677 kes This patch corrects a problem where the maximum concurrent storage
678 jobs counter gets out of sync during restore jobs causing jobs to
679 'wait on max Storage jobs'. This patch fixes bug #1009.
681 kes This patch fixes bcopy so that it produces correct Volumes.
683 kes This patch eliminates spurious output to the console during a VerifyVolume
684 job that contains encrypted data. It fixes bug #1024.
686 kes This patch prevents the 'status dir' command from trying to use a scratch
687 volume and possibly moving it from one pool to another. This patch fixes
690 kes Add new include to postgresql.c suggested by Marc Cousins so
691 that it compiles correctly with pgre version 8.3.
693 kes Fix --archivedir addition to configure. Replace it with
694 --with-archivedir in configure.in This fixes the regression
696 kes This patch fixes bug #1012 where the job is canceled because
697 of Max Run Time exceeded when the job has not yet started.
699 ebl Apply Richard Mortimer patch that fixes #1016 when there are more than
700 one 'part' to write. Instead of each part being stored on disk,
701 written to DVD, then deleted from disk, all parts are written to disk,
702 and only the last is written and deleted from disk.
703 kes This patch fixes the status command to include the formating string for
704 JS_AttrInsterting. It fixes bug #1021.
705 kes This patch should fix the Mac OS X build problem on the latest
706 Darwin, where sys/types.h was not included correctly (apparently
707 due to a change in the Mac headers). The solution was to explicitly
708 ensure that it is defined for the ./configure.
709 This patch also has a rebuild of configure that includes the Debian
710 qt4 patch to check for qmake-qt4. This patch fixes bug #1020.
711 kes This patch should ensure that queued messages to the console are
712 displayed as soon as possible. It should fix bug 1007, but has been
713 reported not to work.
715 kes This patch fixes the infinite loop when trying to increase the
716 maximum number of volumes in a Pool during the add command.
717 This patch fixes bug #1008.
719 Release Version 2.2.6
721 db Remove extra data on estimate command in joblist for bat.
723 kes Cleanup of code in SD that sets the LastWritten date. This doesn't
724 really change anything, but is the beginning of doing it *right*.
725 To do it completely right the LastWritten date must be passed to
726 the SD, but it is not yet done.
727 kes Minor tweaks to some bat restore SQL.
728 kes This patch fixes bug #1003 where putting the message output from
729 a Verify job into the catalog results in a recursive loop. The problem
730 seems to show up only with postgresql (to be verified).
731 kes Correct %x to %p in postgresql debug statement.
733 kes Fix bug #942 where lots of emails where generated when the heartbeat
734 interval was low and Bacula wanted a different tape from the one in
737 ebl Add new SD despooling attributes and Dir inserting attributes
738 job status codes in the catalog (Status table).
740 ebl Use qmake-qt4 instead of qmake when available (debian system).
742 kes Add a security warning to src/cats/make_catalog_backup.in indicating
743 that passing the password via the command line (arg 3) is insecure.
744 This responds to bug #990 (it doesn't fix it).
746 kes Set default debug_level to zero. This corrects bugs #991 and #993.
747 kes Fix a crash in bat when it cannot connect to the Director for example
748 if the Director is not running.
749 kes Remove redundant INDEX (JobId) from File table in the trunk.
751 kes Make explicit exception to GPL in LICENSE to permit linking
752 the Win32 FD with Microsoft VSS code.
753 kes Apply the Solaris package patch from
754 Masopust, Christian <christian.masopust@siemens.com>
755 kes Apply the patch to optionally add a timestamp in the debug output
756 submitted by Mariusz Czulada <manieq@wp.eu>.
758 ebl Use PQerrorMessage instead of PQresultErrorMessage in postgresql
759 backend (sql_strerror). Fixes bug #989
761 kes Apply Michael Short's <mdshort@gmail.com> Win32 regress patch.
762 It applied with no problems.
763 kes Add PATH command to SunOS part of mtx-changer.in so that sed and
765 kes Redirect stderror to stdin on mt status command in mtx-changer.in
766 since the status is returned on stderr on Solaris.
767 kes Activate Close button on tray-monitor window. This fixes
769 kes Check for NULL item in parse_conf.c before calling it. In the
770 case of Device, there is no item and this caused a seg fault when
771 Device appears in the conf file.
772 kes Add a #define __CONFIG_H when including config.h in bacula.h. This
773 avoids pulling in config.h multiple times in some new code.
775 kes Fix spurious warning message printed when creating a volume with
776 a LabelFormat. This fixes bug #976.
778 Release Version 2.2.5
780 kes Add JobId in place of Job name in all the Jmsg() output.
781 kes Correct the APP_DESC for the Win32 storage service (remove an e).
783 kes Make maxvol-test and new more strict maxvol2-test work.
784 kes Print JobId in all Jmsg() job output.
786 kes Add new SD despooling attributes and Dir inserting attributes
787 job status codes. This fixes bug 961.
788 kes Fix Win32 drive display in bat version browser. Fixes bug #962.
790 kes Fix doc issue. This fixes bug #963.
791 kes Fix listing performance problems in bat. Pointed out by
793 kes Remove old debug code.
794 kes Fix bat code that tests for Win32. This should fix bug #968
795 kes Query 5 list wrong Vol after migration. This fixes bug #960
797 ebl Fix #969 where user can't change Replace option in restore menu.
799 kes Save jcr in thread specific data (tsd) for each thread.
800 kes Make Dmsg() print JobId as -%u.
801 kes Make Jmsg, Emsg, and others automatically pickup the jobid
802 for the thread if it exists.
803 kes Remove old reservation debug jid code.
804 kes Remove get_jcr_from_tid() from OpenSSL and tls code.
805 ebl Add an option that permit to specify spool size in job
806 definition. (Applying patches/testing/spoolsize_per_job.patch).
807 You must upgrade SD and DIR at the same time.
808 dvl Add new configuration item --archivedir
809 dvl Adjust regression tests to use tmp not /tmp. This will allow
810 multiple concurrent runs of the regression tests.
812 kes Fix race condition that drops final block written to volume.
813 This happens in rare cases with multiple simultaneous jobs
814 when the Volume fills. This fixes bug #964. May be related
815 to bug #935 and possibly #903.
816 kes Eliminate more strerror() and replace with bstrerror().
817 kes Remove BSD getopt and replace with unrestricted IBM version.
818 kes Fix Win32 build for changed calling sequences.
819 kes More tweaks to the mount volume routines to get everything
820 right. Changed variable name from find to have_vol, which is
821 much easier to understand.
822 kes Enhance btimer debug code.
824 kes Fix FD->SD authorization failure, which was due to spurious
825 wakeups from a pthread_cond_timedwait(). Simply check the
826 predicate before continuing. This fixes bug #953.
827 kes Add const char where needed (more to do). Remove temp debug code.
829 kes Setup SQLite busy handler before doing queries. Fixes bug #967.
830 kes Don't overwrite error message in check_tables_version.
832 kes Unlock batch insert tables with same calls used elsewhere.
833 kes Allow starting 59 jobs a second.
834 kes Make SD session key more random.
835 kes Add retry for SQLite opening db if it fails. Probably helps
837 kes Suppress extra error messages during batch insert failure.
839 kes Add jcr to timer packets so if killed message can be sent to job.
840 kes Add JobId to all Dmsg() output.
841 kes Put some FD auth code on dbglvl rather than fixed.
842 kes Return insert attributes error message in db msg buffer to avoid
843 false error messages. Helps fix bug #966.
844 kes Separate batch init error messages. Probably helps fix bug #966.
845 kes Make SD code that contructs attribute insert check string lengths
847 kes If Dir gets an error during inserting attributes, cancel SD.
848 This reduces unnecessary error messages.
850 kes Correct search boolean for getting Volume info
851 ebl Cleanup batch insert code. Probably fixes bug #965.
852 kes Back out one small change to the reservation system (reserving a volume).
853 kes Rework how a Volume is mounted. It is now much more intelligent and
854 will always attempt to use any mounted volume if possible and reduces
855 calls to the Director asking about volumes.
857 kes Turn off some code when batch insert not enabled.
858 kes Edit FD name in connect error messages.
859 kes Rework the reservation system to take into account that the Director
860 might give us a Volume that is different from the current one being
861 used, and to ensure that we don't exceed Maximum Volume Jobs.
862 This fixes (mostly) bug #947 ' Maximum Volume Jobs = 1 produces
863 fatal error with multiple jobs running'
864 kes Add more debug code in reservation system.
865 kes Implement maxvol-test to check bug #947.
867 kes Add code to handle tray monitor separated from Win32 FD.
868 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
870 kes Add missed return in fixing verify bug -- trunk only.
871 ebl Fix a command parser issue causing a director segfault.
872 kes Fix ANSI tape labeling. Fix restoring ANSI labeled Volumes.
874 kes Increase the max block size to 4MB fixes bug #957.
875 kes ERABT if user sets min block size > max block size. Fixes bug #956.
876 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
877 is not properly mounted (recognized) during a poll.
878 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
879 Job that has differences reports Verify OK.
880 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
882 ebl Add an option to operate on all pools with update vol parameters.
883 This complete the project 20. Patch from Nigel Stepp.
884 ebl Add history support to bconsole when using readline.
885 Using Ctrl-D to exit doesn't update .bconsole_history
886 kes Modify new volume algorithm to use max MediaId for generating next
887 volume number rather than the count of Volumes. This should essentially
888 eliminate the failure rate if some volumes were deleted. Bug #921.
889 kes Begin implemention of Optimize Job Scheduling.
890 kes Implement restore callback that Dirk and I agreed on for bat
891 restore. This fixes bug #928. Restore of backup of zero files fails.
892 kes Fix SQL Catalog logging which broke with new db_escape_string
895 Release Version 2.2.4
897 kes Fix bacula_cats.def for new db_escape_string().
898 kes Increase size of name string when FD making connection to SD.
899 May fix bug #953. FD->SD connection failure.
901 kes Add code to help Dan debug 2drive-incremental-2disk test.
902 kes Add code to try to fix bug #908.
903 kes Add waits to multiple exit detection code to try to force pid
904 file to always be deleted.
905 kes Restore good dev.tar.gz to rescue set appropriate binary property.
907 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
908 trying to switch drives by checking for blocking before unblocking.
910 kes Cancel storage daemon in all cases where FD reports error. This
911 should fix virtually all cases of bug #920.
912 kes Fix db_escape_string() for MySQL which did not compile.
914 kes Fix error message that was clobbered when Dir tells SD it does not
915 have write permission on Volume. This should fix a minor point
916 in bug #942, but not the main problem.
917 kes Add code to cancel job in SD if FD connection fails. This should
919 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
920 dvl Pass jcr and db into db_escape_string() to enable better escaping
922 kes Fix migration code to get correct Volume name with multiple volumes
923 by skipping |. Fixes bug #936.
924 kes Implement patch supplied by Landon to fix bug #944 where using
925 TLS with bconsole uses 99+% of the CPU.
926 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
928 kes Move patches into patches directory.
930 ebl Fix bug #946 about 'bacula-dir -t' which doesn't works
933 ebl Using 'm' in bconsole will show messages like before,
934 and not memory usage.
935 kes Fix bug #935, and probably also bug #903 where files were not
936 restored. MediaId was not properly set in JobMedia record after
939 kes Suppress chown and chmod error messages if the FD is not running
942 kes Apply Martin Simmons' patch that should turn off the new API usage
943 when batch insert is turned off allowing building on older
945 kes Add ./configure search in qwt-qt4 for qwt package
947 kes Bacula is now free of 3rd party GPL copyrighted code!
949 kes Add guid_to_name.c/h which replace idcache.
950 kes Remove enh_fnmatch.c. Make code that references it use fnmatch.c
952 ebl Detect if new PosgreSQL batch insert API is present.
953 kes Correct incorrect mempool call causing Director crash. Occurs on
954 systems without va_copy().
955 sb Update spec files for 2.2.1 release
957 kes Fix memory pool call in ua_output.c. bug #934.
958 kes Replace fnmatch.c and fnmatch.h by modified BSD versions.
959 Add test program to fnmatch.c
961 kes Integrate patch to README.vc8 from
962 Hederer Jean-Sébastien <hedererjs@asperience.fr, had to manually
963 edit it to get it into Unix patch format.
964 kes Implement mkpath.c to replace old FSF makepath.c
966 kes Implement savecwd.h and savecwd.c. Remove FSF versions.
968 Release Version 2.2.1
970 kes Update POTFILES.in
971 kes Cleanup a few underquoted AC_DEFUNs in configure
972 kes Apply patch from Martin Simmons that adds a test for va_copy to
975 kes Fix bug #921 by increasing the number of tries to create a new volume
977 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
978 can be called multiple times. Implement a version for machines
979 without va_copy() that gets a big buffer.
981 kes Integrate more portable zone offset code into bsmtp.c
982 Submitted by Attila Fülöp.
984 kes Fix bad SD->FD return status reported by
985 (James Harper) <james.harper@bendigoit.com.au>
986 ebl Fix a bug in read_close_session which return random status
987 thanks to James Harper
989 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
990 and directory names during restore of single file/directories.
991 kes Add sanity checks to .sql command when string is empty. Hopefully
992 that will resolve Dirks Director crash.
994 kes Apply patch submitted by Martin Simmons that corrects a seg fault
995 in the bsmtp chat subroutine when debug is >= 10.
997 kes Fix Director crash when running bat SQL queries.
998 kes Add David's notes on Item 8: Copy pools.
1000 kes Rework projects file to be current and ready for a vote.
1001 kes Enhance lex scanner error message.
1003 kes Tweak LICENSE file to mention BSD code.
1004 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
1005 if specified on the ./configure.
1006 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
1007 This class is intended to allow us to open a second bsock to the
1008 Director while in the restore subdialog.
1010 kes Fix configure to create bat Makefile before creating dependencies.
1011 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
1012 kes Add a tooltip to the tray monitor.
1013 dvl Set the Director's PID file before dropping privs. This fixes
1016 kes Update AUTHORs file
1017 kes Increase the default max concurrent jobs to 20 in FD and SD to
1018 correspond with the default .conf files.
1019 kes Rewrite the Win32 service routines. This eliminates the 3 copies
1020 some different, of the same file created by RN when porting the
1022 kes Rearrange some of the Win32 directories and the placement of the files
1024 kes Set DEVELOPER flag in version.h
1026 ========================================================================
1027 Release Version 2.2.0
1029 kes Apply a second doc patch from Marc.
1030 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
1031 improves the tips section that discusses how to setup multiple
1034 kes Update bat README file.
1035 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
1036 corrects a typo in the Recycle status check in db_find_next_volume().
1037 This will probably fix a number of annoying problems with multiple
1039 kes Modify most of dird/msgchan.c to use bsock class calls rather than
1040 bnet calls -- no functionality change.
1042 kes Modify the Verify output to specify if files are missing on
1043 the Volume(s) or disk. Fixes confusion in bug #916.
1044 kes When more than one Volume is read in a migration job, the last
1045 Volume bytes reported are from the last read volume rather than
1046 the last written volume. Fixed. This fixes bug #910.
1047 kes Fix display of Recycle flag after update volume=foo recycle=yes.
1048 It previously printed New Recyle flag is: no. This fixes bug
1051 kes Correct seg fault when switching tape drives during restore.
1052 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
1053 be used until after 2.2.0 release.
1055 kes Remove fnmatch() in SD that permitted wild card specifications.
1056 This fixes bug #914.
1058 kes Fix %g in filename returned by SQL for browse tree reported by
1060 kes Fix configure so that it puts config.out in the cwd rather than
1062 kes Attempt to fix the locking problem reported by Eric in bug #906.
1063 kes Make berrno class to leave errno unchanged after constructor call.
1064 kes Make bnet_server use the heap rather than the stack to allocate
1065 its socket fd pointers to avoid a crash at termination. Problem
1066 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
1068 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
1069 and putting it in depkgs-qt along with Qt4.3.
1071 kes Rework code in acquire.c that switches drives for reading when
1072 the Media Type does not match. This should fix bug #906
1074 ebl Fix a director segfault during job setup #907
1075 kes Correct seg fault in postgresql when first operation returns no
1076 rows. Fixes Dirks File browser problem seg fault with bat.
1078 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
1079 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
1082 kes Implement PopUp YES/NO dialog for bat.
1084 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
1086 kes Correct RunScript to terminate job in FD on failure.
1087 kes Change abort_on_error and AbortJobOnError to fail_on_error
1088 and FailJobOnError in RunScripts.
1089 kes Minor tweaks of code formating in RunScripts, principally to
1090 avoid depassing 80 columns.
1092 kes Eliminate one #ifdef Win32 in bsmtp
1093 kes Implement grow tool to grow a file for testing very large databases.
1094 kes Add big-vol-test to test Bacula seeking with > 5GB.
1097 kes Modify find_next_volume() to return all values in Media record.
1098 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
1102 kes Update Release notes
1104 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
1105 Warning, in previous beta version, all media get from scratch keep their
1108 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
1109 This should fix bug #842. Made a note to look at removing the temp
1110 files at the end of the install.
1111 kes Add ability to mount and unmount a file device providing it is
1112 marked as being removable and has the appropriate mount and unmount
1113 commands defined in the Device resource. This fixes bug #830.
1114 kes When applying a storage override, release all previous storage
1115 definitions rather than just prepending the new storage.
1116 This should prevent a good deal of confusion.
1118 kes Implement ./configure search for qwt libraries.
1120 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
1121 Win32 FD. This should fix bug #893.
1122 kes Remove an unnecessary beep in Win32 init code.
1123 kes Update copyright dates in Win32 executable about boxes.
1124 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
1125 code with a BSD getopt.c and getopt.h.
1126 kes Remove sched.h from the Win32 compat directory -- not used.
1127 kes Remove the Exit menu item from the Win32 tray monitor. If you really
1128 need to shut it down, do it through the services panel or the command
1130 kes Remove some inappropriate Bacula FSFE copyrights.
1131 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
1132 kes Fix regress config non-portable test as pointed out by
1133 Florian Heigl <florian.heigl@gmail.com>
1134 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
1135 as pointed out by Florian Heigl <florian.heigl@gmail.com>
1137 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
1138 Reported by Frank Sweetser.
1142 kes Fix client-only build.
1143 kes Integrate client-only fixes for bsys (initgroups) and conio from
1144 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
1145 kes Make arguments to get_scratch_volume() in same order as other
1147 kes Rework the prune_volumes() subroutine so that after purging and
1148 no volume found in desired pool, it will check for a scratch
1149 volume. This prevents recycling the whole scratch pool.
1150 kes Add code to status storage to print boffset_t (largefile support).
1152 kes Move qwt (Graphics libarary for Qt4) to depkgs.
1153 kes You now need a --with-qwt=<dir> to be able to build bat.
1154 kes Update src/win32/cats/bacula_cats.def to include the new
1155 db_get_query_dbids() call on Win32.
1157 kes Correct a problem when selecting a scratch volume and moving
1158 it to another pool that lost some columns.
1159 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
1160 kes Enhance Autochanger error messages to include Volume and device name.
1161 kes Rework prune_volumes() code to take account of InChanger flag,
1162 and to handle recycling volumes going to the Scratch pool and
1163 current pool because the RecyclePool directive.
1164 kes Implement a better and more efficient db_get_query_dbids() to
1165 handle creating and passing back a list of DBIds.
1169 kes Start work on new more efficient DBId subroutine. First use
1170 will be for recycling volume to Scratch inchanger.
1171 kes Increase number of JobIds in pruning from 1000 to 10000.
1172 This to be replaced by above routine.
1173 kes Begin implementation of building Qt4 on Win32.
1174 kes Correct typo in fix I added for bad TLS shutdown.
1175 kes Pull 2.0.3 patches into patches directory.
1176 kes Update Release notes. Include qt-console in line count.
1177 kes Update Projects file.
1179 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
1180 bug in migration code where a job that spanned two volumes
1183 kes Implement new BST_DESPOOLING blocked state. Change from locking
1184 during despooling in SD to blocking. This means that other threads
1185 can work with the device structure, in particular the reservations
1186 system while despooling.
1188 kes Fix return in reservation message queue that missed clearing
1189 the jcr lock (implemented 26Jun07 below).
1190 kes Rename a number of dev methods to make locking function names
1192 kes Document locking in lock.c. Move lock structures to new file
1195 kes Move reservations message lock to lock jcr only this
1197 kes Move main SD locking code into lock.c (new file).
1198 kes Update Win32 build to include lock.c
1202 kes Dirk committed the qwt library code for drawing graphs in bat.
1203 kes Tweak install of qwt so that it is integrated with ./configure.
1205 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
1206 out by Eric (my typo).
1207 ebl Fix configure.in to get batch mode enable
1208 kes Return correct string from authenticate.cpp in bat when connecting
1210 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
1211 spurious line drops when using TLS.
1212 kes Do not file reparse points when restoring a file that already
1215 kes Implement Windows reparse points -- similar to directories, but
1216 we do not descend into it. This is a first cut. They seem to
1217 be backed up, but restore is not yet tested.
1218 kes Remove restore_blocking in tls code when shutting a socket to leave
1219 it in blocking mode. Hopefully this will fix the encryption bug
1220 reported by Frank Sweetser.
1221 kes When opening a file for backup, tell the OS that we are going to
1222 read it sequentially -- optimization.
1223 kes Change variable names in authenticate_director() to not conflict
1224 with member names in bat. Caused great confusion with compiler,
1227 kes Queue openssl error messages in case of comm problem.
1228 kes Do shutdown() call if socket terminated.
1229 kes Remove some duplicated code in tls.c
1230 kes Move more of the bsock member variables into private and access
1232 kes Add Frank Sweetser's tls-test to the regression suite.
1234 kes Add Swedish sv.po file
1236 kes Don't print clock skew message in FD if less than 3 seconds diff.
1237 kes Add a bit of VSS info to status client.
1238 kes Implement a first cut of Vista VSS, using Win2003 code.
1240 Release: 2.1.20 beta
1242 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
1243 loaded tape but uses first drive).
1244 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
1245 This was indeed a Win32 issue.
1247 kes Simplify search of autochanger for in-use Volume.
1248 kes Fix exit condition of check for in-use volume. kes Remove
1249 inappropriate my_postgresql_free_result() in db_close()
1251 kes Fix bad return in FD when encryption signature not found.
1252 Probably caused a crash.
1253 kes Inhibit missing encryption signature error messages for
1254 file types where no signature computed.
1255 kes Correct inverted check on autochanger in reservation system.
1256 kes Tweak debug code in autochanger reservation.
1258 kes Add some additional locking in the cats directory in subroutines
1259 that modify packet variables called from batch insert.
1260 kes Rework how dcrs are allocated. new_dcr() can now be called
1261 with an existing pointer, and it will simply clean it up.
1262 This allows the reservation system to test various different
1263 devices, and will permit easy device changes.
1264 kes A bunch of changes all over to handle new new_dcr() calling
1266 kes Work more on the Volume management in the SD. Remember Volumes
1267 for tape drives and for autochangers (even virtual disk changers).
1268 kes When looking at the Volume list to reserve a drive, handle
1269 autochanger names correctly by interating through the changer
1270 devices. Also call the Director to see if a Volume is suitable
1271 for the current job.
1272 kes Fix some bugs in bscan. Make sure all media records are written.
1273 Make sure that valid JobMedia records are written for disk files.
1274 Previously they were completely wrong.
1275 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
1276 that the URLs don't change and so that the developers will all
1277 work off the same copy. Rebuild from scrach.
1278 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
1280 Release: 2.1.18 beta
1282 kes Fix seg fault in FD from incorrect digest size.
1283 kes Fix argument to non-OpenSSL crypto.c subroutine.
1285 Release: 2.1.16 beta
1287 kes Remove a few malloc()s from the encryption code.
1288 kes Use the class calls to bsock in filed/backup.c and restore.c in
1289 place of the old bnet_xxx code.
1290 kes Implement code that does an on the fly calculation of the
1291 signing digest during restore of encrypted files. It makes
1292 a best guess at the algorithm, and if it is not correct, will
1293 then revert to the old code which reads the file after it is
1295 kes Implement at least one missing crypto stream in stream_to_ascii()
1296 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
1297 #877 where a reload with bad syntax causes Dir to exit.
1299 Cut: 2.1.14 beta (not released)
1301 kes Do not free a volume on a tape drive until another volume is
1302 mounted and read, or the autochanger unloads the volume.
1303 This should help the SD re-use volumes that are already mounted,
1304 and should fix bug #886.
1305 kes Apply patch from user brettedgar that allows gnome2-console include
1306 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
1307 kes Apply patch from Lucien Weller that fixes day of week calculation
1308 because of DST flag problem. Fixes bug #887.
1310 kes Move find_next_appendable_volume() to after acquiring a valid device
1311 in reserve.c. This fixes bug #864 -- confirmed by reporter.
1313 kes Unable to reproduce bug 872. However added additional testing for
1315 kes Bug #874 resolved by documenting SQLite limitations.
1316 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
1317 kes Bug #881 resolved by removing typo in mtx-changer script.
1318 kes Made Frank Sweetser's wiki the official Bacula wiki with his
1319 approval. Added a link to the wiki on the web page, and implemented
1320 a backup from http://paramount.ind.wpi.edu
1322 kes Fix update allfrompool to pass pool name.
1324 kes Convert to pure GPL v2 license.
1325 kes Fix sscanf problems reported by Peter Buschman that caused
1326 a bus error on Solaris.
1327 kes Rework (simplify) the select prompt in bat.
1328 kes Move get_jobid_from_tid() into lib and create a
1330 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
1331 should definitely fix the problem of lost error messages in the
1333 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
1334 kes Eliminate tcpd.h from the project. Enclose the #include from the
1335 library with extern C ...
1336 kes Add print of signal name when a signal is trapped.
1338 Release: 2.1.12 beta
1340 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
1342 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
1343 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
1344 makes SQLit3 run 30 times faster, though a bit less safe.
1345 kes Implement --with-batch-insert in configure and detection of thread
1346 safe libraries. It is on by default, but turned off if no thread
1347 safe library (e.g. SQLite 2) is available.
1349 kes Fix Bacula PostgreSQL buffer overruns.
1350 kes Do better checking for NULL results returned from PostgreSQL;
1351 implement retry for failed queries; clear results buffer after
1352 failed query. Hopefully this will correct the PostgreSQL failures.
1354 kes Implement algorithm to handle only one appendable volume with
1355 Prefer Mounted Volumes = no.
1356 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
1357 returned from a query.
1358 kes Make volume lock recursive.
1359 kes Implement an additional volume reservation algorithm that
1360 starts by considering all reserved volumes then uses the
1361 old brute force algorithm of searching the resources to
1362 find a suitable device.
1363 kes Add new reservations debug code and refine the old code.
1364 kes Update the win32/dll/bacula.defs file.
1366 kes Tweak reservations algorithm to permit a few more cases, i.e.
1367 volume reserved, but on different drive, ...
1368 kes Enhance SD status to include Pool and Media Type for drive in a
1369 more readable format (a bit longer).
1370 kes Fix PostgreSQL double free.
1372 kes Minor refactoring of restore decryption code.
1373 kes Add code to smartall.c to detect double free of a buffer.
1375 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
1376 so that bsmtp will create a correct email address (mailbox only).
1377 kes Modify 'memory' command so that the buffers are listed as 'In use'
1378 to avoid confusion with Orphaned buffers.
1379 kes I reworked the OpenSSL include/lib flags to be handled in
1380 the standard Bacula way, which should fix bug #863 concerning
1381 non-standard OpenSSL libraries.
1383 kes Implement Help Browser window for bat.
1384 kes Fix reload bug that reset StorageId to zero.
1386 kes Fix TLS #ifdefing when TLS turned off.
1387 kes Ensure that when labelling a tape with Slot=0 that InChanger
1389 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
1391 kes Add StartTime to final uar_sel_jobid_temp query so that we can
1392 add DISTINCT (required by PostgreSQL).
1393 kes Implement BSOCK authenticate_director() method. Eventually will
1394 authenicate all daemons.
1395 kes Move several more functions into the BSOCK class.
1397 kes Add code to tell the OS that we no longer need a cached
1398 file that we were reading. In findlib/bfile.c. Also,
1399 only cache files that we are reading. Thanks to
1400 Tobias Oetiker <tobi@oetiker.ch> for the idea.
1401 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
1402 kes Implement script to automatically generate cats and dll .def
1403 files for Win32 dll.
1404 kes Update README.mingw32 to include new .def file generation.
1405 kes Correct typo in UTF-8 error message as reported by:
1406 jhernandez <julianhernandez@gmail.com>
1407 kes Add additional sm_check() code on debug level 1.
1408 kes Set default debug level to 1.
1409 kes Trap SIGABRT in attempt to get traceback.
1411 kes Reduce bat connect timeout from 30 to 15 seconds.
1412 kes More restructuring and implementing BSOCK class in place of
1414 kes Remove a few unnecessary malloc() tests in crypto code.
1415 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
1416 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
1417 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
1419 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
1421 kes Fix Verify InitCatalog. The attributes were not pointing to the
1422 correct saved location.
1423 kes Implement message callback so that GUI is sure to get all
1424 daemon messages. Currently displayed in a dialog in bat.
1425 kes Ignore SIGUSR2 (Bacula timer) in bat.
1426 kes Apply regress patch from bug #859 to allow regress to work
1427 with Solaris compiler.
1429 kes Begin adding TLS support to bat.
1430 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
1431 clean up lex.c and make it more readable.
1433 kes Move more bnet functions into the BSOCK class.
1434 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
1435 kes Complete change of berrno strerror() method to bstrerror()
1437 Release: 2.1.10 beta
1439 kes Cleanup incorrect email addresses in bsmtp.
1440 kes Make bat display initial messages rather than discard them.
1442 kes First cut of adding .mod to the run command.
1443 kes Implement auto display of messages in bat.
1444 kes Enhanced preferences to allow all Bacula output to be
1447 kes Try to make bsmtp date routines more generic.
1448 kes Fixed bug #856 autochanger documentation.
1449 kes Rework bsmtp date editing for Win32. This fixes bug #854.
1450 kes Add new cats entry point so Win32 builds.
1452 kes Attempt to fix bsmtp date editing on OSes without %z editing.
1454 kes Do better checking for the MySQL 64 bit libraries looking for both
1455 .a and .so libraries.
1456 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
1457 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
1458 kes Require the thread safe version of MySQL during configure. Thanks
1459 to Andre Noll for pointing this out.
1460 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
1461 continuing in migration code.
1462 kes Apply implementation of tray-monitor font derived from gnome-console
1463 submitted by Andreas Piesk <a.piesk@gmx.net>
1465 kes Eliminate important memory loss in SQLite
1466 kes Fixed the batch insert MySQL thread specific data that was not
1467 being freed. See cats/mysql.c:db_thread_cleanup().
1468 kes Fix restore before command.
1469 kes Convert old hdr.name to name() in a few places.
1470 kes Implement update jobid command.
1471 kes Return all time_t dates in db_get_job_record()
1472 kes Stop watchdog in SD earlier.
1473 kes Put Pool just after Storage in please mount message.
1474 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
1477 kes Update the po files.
1478 kes Fix Verify InitCatalog by making it cache attributes.
1480 kes Change name bacula-bat to bat for man 1 page to correspond to
1482 kes Check for client and store NULL pointers in status command. This
1484 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
1485 kes Fix sign extended editing of %p.
1486 kes Clean out a little old #ifdefing in cats/mysql.c
1488 kes If time diff between DIR and FD is more than 600 seconds convert
1489 INFO message to WARNING.
1490 kes Implement heap size display in status for all daemons.
1491 kes Attempt to fix MySQL db open memory loss (not successfull).
1492 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
1493 kes Eliminate memory loss in MySQL (possibly other SQLs) during
1494 Query. This looks like a MySQL but but by doing extra releases,
1495 the memory goes away. This should fix bug #847.
1497 kes When backup fails, cancel SD before waiting for sd termination.
1498 kes If SD is waiting for FD to connect during cancel, wake up the
1500 kes Fix fsf code so that errno is correctly reported.
1501 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
1503 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
1504 so that Bacula doesn't later stumble into a seg fault.
1505 kes Use the term Restore Client in the restore Job report.
1506 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
1507 the original job's FileSetId.
1508 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
1509 spooling in migration jobs. Not yet tested.
1510 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
1511 reading conf file from a pipe. However, do it with open_bpipe()
1512 rather than popen. Not yet tested.
1514 kes Fix an ugly bug where the VolCatBytes were getting updated
1516 kes Implement bconsole memory command that prints current memory
1517 usage, plus smartalloc dump.
1518 kes Clarify some error messages in backup, admin, and migrate.
1519 kes Shrink label dialog to smaller size.
1520 kes Invert Cancel OK buttons on restore to be OK Cancel.
1521 kes More strerror() to bstrerror() conversions.
1523 kes Start implementing bstrerror() in place of strerror().
1524 kes Stripping path -- seems to work.
1526 kes Prevent door and port files from being restored (mostly
1528 kes Free an unreleased buffer in compat code.
1529 kes Change console Job name from *Console* to -Console- to eliminate
1530 Win32 filename problems. Put Win32 path separator when creating
1531 Console file. This fixes bug #846.
1532 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
1534 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
1536 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
1537 to force Win32 error message.
1539 kes First cut strip path. The data should be passed to the FD,
1540 but nothing is done with it yet.
1541 kes Enhance the digest and signature routines in the crypto
1542 library to accept a JCR and to use it to print error messages
1543 so that they will go in the Job report rather than the daemon's
1545 kes Simplify some of the verify signature code.
1546 kes Simplify a few of the alternative returns in the signature
1549 ebl Use only POSIX regex instead of GNU regex in breg.c for
1550 File relocation. It fix broken freebsd compilation.
1551 kes Convert all other Dir files to use new ua class message
1553 kes Tentative fix for missing digest signature in bug 807.
1554 kes Correct handle problem in new win32_ftruncate routine.
1555 kes Convert ua_purge.c and ua_update.c to use new ua class
1556 message routines for bat.
1558 kes Correct incorrect installation of LICENSE in Win32 installer.
1559 kes Display LICENSE at the beginning of the Win32 install.
1560 kes Attempt to correct the need for the png files to be installed
1562 kes Reapply my bat.conf install script in qt-console. I think I
1563 editted bat.pro instead of bat.pro.in and it was lost.
1564 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
1565 the /var/lock/subsys for subsysdir. Also corrects typos in the
1568 kes First cut update job.
1569 kes Correct configure to include qmake of src/qt-console directory.
1571 kes Make restore job yes/mod/no print in one command so GUI works.
1572 kes First cut implementing backup and restore client.
1573 kes Correct editing in Verify output that caused a seg fault.
1575 kes Insure that bat.conf is not overwritten during installation.
1576 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
1577 while I was implementing migration in March 2006 !
1579 ebl Cleanup file relocation, using char *RegexWhere instead of
1580 char *where + bool where_use_regexp
1581 kes Update some manpages and add bat manpage.
1582 kes Make a first cut at converting bacula.spec.in for bwx-console
1584 kes Apply patch from John Goerzen to add hostname as fourth argument
1585 to make_catalog_backup script.
1586 kes Fix typos I introduced into bsmtp.c
1587 kes Make pm_strxxx() routines handle input of NULL pointer. This
1588 is to protect from NULL pointers returned from SQL databases.
1589 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
1590 kes Add more debug to FIFO code -- fix fifo regression test.
1592 kes Implement posix_fadvise in FD, and for reading spool files in SD.
1593 kes Add thread timer to bnet_connect() to break from OS if wait time
1596 kes Update Win32 build to include new files, new symbols, and
1598 kes Implement socket level heartbeat (tcp_keepidle)
1599 ebl Commit File relocation patch
1600 kes Make bat have 'make install' target.
1601 kes Warn during install if old gnome-console binary found.
1602 kes Warn during install if old wx-console binary found.
1603 kes Add -8 option to bsmtp command line to add content type utf-8.
1604 Fixes bug #809. (Character coding problem in bsmtp).
1605 kes If < is found in target (from, to, cc) then do not enclose the
1606 target in < > in bsmtp. Fixes bug #772 (malformed address).
1607 kes When printing certain items in dbcheck, stop after 300000.
1608 Fixes bug #822. (dbcheck loops).
1609 kes Incorrect status in Dir after waiting for mount with poll set.
1612 kes Extend idea of Prefer Mounted Volumes to mean a volume about
1614 kes Print waiting to reserve a device every 5 mins.
1616 kes Don't call close_part in label.c if tape and relabel.
1617 kes Don't free volume if busy in close() -- should help with
1619 ebl Fix #824 RunScript bug (After script could be execute twice)
1620 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
1621 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
1622 Add a regression script to test RunScript
1624 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
1627 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
1628 deprecated. No additional bugs will be fixed, and they will be dropped
1629 in a future release (probably 2.4.0).
1630 kes Change name of wx-console to bwx-console to make it more Bacula
1632 kes Change the name of gnome-console to bgnome-console to make it
1635 kes Some time in March, a Feature Request with patch from Jorj Bauer
1636 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
1638 The ability for the director to validate a Client (FD) CN against
1639 an arbitrary set of patterns rather than the hostname, with
1640 A new 'TLS Allowed CN' set of directives which are implemented
1641 in the Client resource. Then pattern matching is used in place
1642 of hostname matching against the Certificate's CN. As an example, we
1643 have certificates which (a) use a local CA, and (b) have a CN of the
1645 kes Add new/changed entry points to Win32 build
1646 kes Create unaccepted-projects for projects that are not accepted.
1647 kes Simplify locking in the reservations system.
1648 kes Add more debug code in reservations.
1649 kes Make sure error condition on reserving a volume is handled correctly.
1650 kes Correct handling of volume_in_use.
1651 kes Correct handling of initializing a device.
1652 kes Move handling of broadcasting releasing a device into release_device().
1653 kes Correct attaching dcr to dev so that it is only done if device
1654 is properly initiated.
1656 kes Locking debug level tweaks in SD.
1657 kes Tweak new Volume code.
1659 kes Add exec external-command [wait-seconds] to bconsole. This
1660 executes the external-command. Note! normally external-command
1661 should be enclosed in double quotes.
1662 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
1663 it should normally be off in a production system.
1665 kes Implement die command for SD so that we can force it to dump.
1666 kes Implement SD lock debug code.
1667 kes Implement new algorithm for keeping Volume list in SD. It
1668 is now owned by the device.
1670 kes Implement new code for freeing in use volumes that should
1671 resolve if not all, some of the problems of multiple drive
1672 tape conflicts described in bug 801.
1674 kes Fix gui/bacula-web/images files in svn.
1675 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
1677 ebl Fix a bug in batch mode (in string escape)
1678 kes Correct migration prune SQL typo that crept in in a
1679 recent 2.1.x change.
1681 kes Move bnet_despool() into class in bsock.c
1682 kes Modify job report to include director name and Build OS.
1683 kes Move drop root privilege and check_catalog() before fork.
1684 kes Add update database scripts (version 9 to 10) to updatedb directory.
1686 ebl Check size and age of each file after its backup to see if
1687 it has changed during backup, if 'checkfilechanges' is set.
1688 The FD will do an extra check (stat(2)) after
1689 each file backup. mtime, ctime and size are compared with
1690 'before backup' information. If time or size mismatch, an
1691 error message will be generated. You must upgrade FD to use it.
1693 kes Make database name and user configurable
1694 --with-db-name=xxx --with-db-user=xxx
1695 kes Add back database type to message.c for debugging.
1697 kes Implement dir_sql() which issues an SQL query.
1698 kes Modify bat medialist to use dir_sql() and do some minor C++
1699 formatting as well as eliminating a number of pointers, simplifing
1702 kes Fix some of the mtx-changer grep commands for tape label readers.
1703 kes Convert a number of bsendmsg into the appropriate send/warning/error
1704 message class calls.
1705 kes Suppress the using database message in the .sql command.
1706 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
1708 kes Add context menu for floating a window.
1709 kes Some minor cleanup and name changes in qt-console
1710 kes Add doing mt setblk 0 in Win32 mtx-changer.
1711 kes Apply Martin's bug fix to move definition of ENODATA for
1713 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
1714 sqlite2 and sqlite3.
1716 kes More pruning cleanup.
1717 kes Turn on wait_for_drive by default in mtx-changer.
1718 kes Turn on Batch insert code by default as it now passes regression.
1719 kes Add ./configure --enable-bat to enable building of Bat.
1720 No install yet though.
1722 kes Implement a new .sql command for bat.
1723 kes Implement code to turn off pruning in obtaining the next volume.
1724 Pruning is turned off for the status dir command, but turned on
1725 for SD requests and for the list nextvolume command.
1727 kes Correct Qmsg() that was not updated correctly when committing a
1728 previous change (probably the recent TLS patch).
1730 kes Write new subroutine is_volume_purged() that explicitly checks
1731 if the Volume is purged, and if so marks it as such. This should
1732 resolve problems reported about needing to mount twice to recycle
1734 kes Rewrite pruning algorithm to do more work in the SQL engine, and
1735 to pass a list of JobIds to be deleted to SQL. Also, minimize the
1736 amount of duplicated code.
1737 kes Do volume pruning only for the Media Type desired (reduces pruning time
1738 if multiple Media Types are in the same pool).
1739 kes Implement more detailed info in the Job report for the Bacula version
1741 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
1743 ebl Add bbatch tool to bench database and insert mode.
1744 Fix sql quote stuff in batch mode
1745 Fix sql stuff for mysql
1747 kes Correct problems with am/pm scheduling. Fixes bug #808.
1748 kes Implement new prunning code that prunes up to 1000 jobs at
1749 the same time. The same technique can be applied to a number
1750 of other prune/purge subroutines.
1751 kes Add an insanity check when starting a new tape job to ensure
1752 that the tape position has not been changed. If so fail the
1754 kes Fix Win32 build for dlls to add the folllowing:
1755 src/lib/bsock.c -- new file with new entry points
1756 src/lib/dlist.c -- new entry points
1757 src/cats/sql_create.c -- new entry point
1758 src/cats/sql_cmds.c -- new DATA item exported
1760 ebl batch mode cleanup bscan-test is ok now.
1761 kes Implement SD code to check length of disk volume before appending.
1763 kes Correct return status on db_batch... routines.
1764 kes Add call to db_write_batch_file_records() to migration code.
1765 ebl Fix AfterJob timing
1766 kes Move the checking of the database in initializion of the Director
1767 to after we drop privileges. This avoids the need for both root
1768 and bacula access to the DB.
1769 kes Correct a misplaced variable definition in src/filed/backup.c
1770 kes Correct how the new batch insert db_create_attributes_record()
1771 uses the arguments. Caused a seg fault in bscan.
1772 kes Implement lock() and unlock() methods in DEVICE class.
1773 Implement block() and set_block(xx) methods in DEVICE class.
1774 kes Modify bnet_connect() so that it uses time() to check for the
1775 wait time expiring (on some OSes, some system calls may not
1776 return immediately).
1777 kes Modify Verify to obtain the previous JobId when it is actually
1778 running rather than at schedule time (as it was in 1.38.x).
1779 kes Fix src/job.c to handle MaxWaitTime correctly. This should
1781 kes When checking pid in pid file, continue running if the pid is
1782 the same as ours. This occurs on IRIX after a system crash.
1785 kes Extend new GUI API.
1786 kes Make the ua structure a class, and implement send_msg(),
1787 error_msg(), warning_msg(), and info_msg().
1789 kes Apply fix from for building wx-console on the Mac from
1791 kes Implement new select mechanism for GUI programs.
1792 kes Reorganize initialization of stackedWidgets in bat.
1794 kes Add updated nagios plugin supplied by Christian Masopust.
1796 kes More bat implementation.
1797 kes File migrate bug with Pool Occupancy using mediaid instead
1798 of jobids. Fixes bug #795.
1799 kes Fix orphaned buffers in filed backup and verify due to
1800 crypto buffers not freed during errors. Fixes bug #789.
1801 kes Extend new GUI api code to tree commands.
1802 kes Ensure that tree and dot commands check console ACLs.
1803 kes Permit marking directory with trailing slash.
1804 kes Allow 20 console connections (instead of only 10).
1806 kes Add smartctl call to bacula-sd.conf as an example of getting
1809 kes Modify jobq.c to let simultaneous restore jobs run. This may
1810 cause them to fail if they cannot get a drive.
1811 kes Add Client Connect Wait to Storage daemon to permit users to
1812 modify the time the SD waits for a FD connection.
1814 kes Correct virtual changer check which was backwards. This caused
1815 volumes to be unloaded into slots already occupied.
1817 kes Apply Command ACL filter to JobId list in restore command.
1818 kes Correct typeo in var.c patch.
1820 kes Don't let Bacula prune File or Job records for the current Job.
1821 kes Fix variable substitution pad + inc bug reported (with patch)
1824 kes Correct SQLite log table index as reported by Luca Berra.
1826 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
1828 kes Begin implementing new comm signals for API.
1829 kes Fix a few places in lib/message.c where the open fd may
1831 kes Continue implementing lib/bsock.c (real class). Make jcr,
1832 who, host, and port private. There are new methods to access
1833 them for non-class use. This required touching a number of files.
1835 kes Add LANG=C to autoconf/randpass so it works with languages other
1836 than English. Fixes bug #788.
1838 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
1840 You will not be able to generate Include/Exclude list any more.
1841 It will be fixed soon.
1842 If you want to use this, you can apply
1843 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
1845 kes Restore of sockets created false error messages because Bacula
1846 no longer restores sockets, but the code was still trying to
1847 set the attributes on a non-existent file. Reported by a user.
1848 ebl finish RecyclePool feature
1849 Media will takes Pool.RecyclePool
1850 when moving from Scratch to a Pool or when user will do
1851 update volume=xxx frompool
1852 To use it, add RecyclePool = aPool to your Pool resource
1855 RecyclePool = Scratch
1859 kes Expand new BSOCK class adding signal() and new BNET signals.
1860 kes Begin enhancing the dot commands adding a new API function
1861 that returns more information and will make it easier
1862 to interface to the Director from a program.
1864 kes Make DEVICE fd private. Its new name is m_fd, and can be
1865 obtained with dev->fd() outside the class. This is the
1866 first of many DEVICE members to be made private.
1867 kes Implement Michael Renner's idea on having a virtual disk
1868 changer. I made some minor modifications (e.g. I did not
1869 implement the Virtual Changer directive, but simply set
1870 the Changer Command to an empty string.
1872 kes Implement a BSOCK send() method that writes the whole record
1873 in a single write() request rather than in two.
1874 ebl add update volume=xxx recyclepool=yyyy
1875 volume takes recyclepool from pool when using update volume=xxx from pool
1877 kes Fix encryption deblocking bug, which caused some restored files
1878 to be truncated. This fixes bug #763.
1879 kes Add FD event sequence order prepared by Eric -- for RunScripts.
1880 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
1882 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
1883 ebl Use btime_t instead of uint64_t in media patch.
1885 kes Optimize the use of the database a bit in the Status dir command.
1886 Only open it when needed, ensure that if any previous database
1887 was opened, it is closed.
1889 kes Correct VolCatBytes bug from media patch.
1890 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
1891 in the case of orphaned records.
1892 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
1893 and File records in 300K chunks to be more efficient. This
1894 idea came from Juan Luis Frances (if I remember right).
1895 kes Apply Eric's scratch patch that moves a purged Volume to
1896 the RecyclePool. Question: how is RecyclePool set? what
1897 happens to the ScratchPool?
1898 kes Apply Eric's media patch that collects read/write media
1899 times as well as byte counts. This patch requires a
1900 simultaneous upgrade of the DIR and SD. Note, there
1901 should be some way to turn off timing. I'm not sure
1902 times are in Bacula units.
1903 kes Apply Eric's batch-insert patch.
1905 kes Update projects list.
1907 kes Implement Include/Exclude file lists in FD as dlists using
1908 the new dlistString class. This permits efficiently having
1909 large include/exclude lists and completes project Item 25.
1910 kes Fix dird/ua_cmds.c so that a cancel command checks if the
1911 console is authorized to cancel the job. This fixes bug
1913 kes Modify SD so that the VolCatJobs medium record is updated
1914 at the beginning of a Job rather than the end. This
1915 fixes bug #775 where exceeding MaxVolJobs caused jobs
1917 kes Added a mutex around getting and setting Volume information
1918 so that multiple simultaneous jobs will single thread.
1920 Switch to using Subversion
1921 kes Remove src/pygtk-console/ from configure
1923 kes Delete src/lib/btree.c from win32 build, then add rblist.c
1924 plus the entrypoints.
1925 kes Apply patch supplied that corrects debug print
1926 in canceling jobs for max run time. Supplied as
1927 part of bug #621, which was previously fixed.
1929 kes Test on job_canceled() and sd_msg_thread_done inside
1930 loop starting the message thread to avoid a race condition.
1932 kes Remove rl_catch_signal from console.c as it conflicted
1933 with the header definition. Fixes bug #765.
1934 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
1936 kes Clarify some stored/acquire messages to indicate if the
1937 problem is with read or append.
1939 kes Fix memory leak with storage ids in cats/sql_get.c
1940 kes Terminate watchdog earlier to avoid reference to released
1941 memory -- reported by Jason Austin.
1942 kes Move closing the database from jobq.c to the director daemon
1943 termination routine. This fixes memory leaks for shadow jobs
1944 (i.e. migration jobs).
1945 kes Free up the unique jobid chain items in migrate.c. This fixes
1946 a memory leak problem.
1947 kes Convert some ugly looking for statements to use foreach_alist
1948 in findlib/find.c. This will facilitate converting the structures
1949 to use dlist (for large include/exclude lists).
1950 kes Fix a bug in the btree.c and btree.h routines, then rename them
1951 rblist and add them to be built in src/lib. Include some new
1952 methods written by Rudolf Cejka that make the code more readable
1953 (hides some of the ugly casting).
1954 kes Add set_next() and set_prev() methods which make the code much more
1955 readable. Also add a new dlistString class that facilitates storing
1956 strings in dlists. To be used in the large include/exclude lists.
1957 kes Make some trivial modifications to lib/tree.h that use rblist
1958 rather than dlist for storing the tree links. This was suggested
1959 by Rudolf Cejka. The result of this is that the restore tree now
1960 uses red-black binary trees rather than simple linked lists. This
1961 should give rather dramatic speed improvements for directories
1962 contining large numbers of directories/files (more than 10000).
1964 kes Fix maxruntime bug #621.
1966 ebl Implement the include JobID in spool file name project.
1967 kes Reorder projects file in order determined by Jan 2007 vote.
1968 kes Implement item #12 on project list -- quick release of FD by
1970 kes Fix open of SQLite3 db where user does not have write permission
1971 so that DIR does not crash. Fixes bug #761.
1973 kes Add back missing @ in Win32 Makefile.
1974 kes Change 'Device not configured to autolabel' from INFO
1976 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
1977 which should restart an indefinite # of times.
1978 kes Fix configure --help to print --with-mysql[=DIR]. Same for
1979 other DIR specifications.
1981 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
1982 Fix path quoting in SQLite scripts.
1983 Fix problems with SHGetFolderPath.
1985 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
1987 kes Fix Job restart on error bug that promotes an Inc to a Full
1988 backup. This should fix bug #755.
1989 kes Add qt-console and first cut of code.
1993 kes Fix Bacula->Documentation link on Win32 to point to index.html
1994 instead of bacula.html. Fixed bug #750.
1995 kes Return JobId in db_get_job_record() when JobId==0. This should
1997 kes Do not release source pointers when restarting a failed job.
1999 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
2000 This *should* fix bug #747.
2001 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
2004 kes Modify USTORE constructor to set an empty store_source string,
2005 and don't copy the store_source string in a cancel. Hopefully
2006 this will fix Arno's seg fault, bug #744.
2007 kes Add back code to disable conio in configure. Fixes bug #743.
2008 kes Correct the Options scanner in the FD to correctly handle
2009 SHA1 option, which was eating the next option. Reported by
2011 kes Add code to indicate when the SD is spooling, spool wait, and
2012 despooling as requested by Alan Brown.
2014 Version 2.0.0 released: 4 January 2007
projects / bacula / bacula / blob