1 Technical notes on version 2.5
5 command separator in console (!$%&'()*+,-/:;<>?[]^`{|}~)
6 examples/database/dbcheck.sql
7 enhancement to wait command: wait mount ...
9 filepattern (restore with regex in bsr)
14 kes Fix orphaned jobs (possible deadlock) while pruning.
15 kes Use jcr stored in bsock rather than searching in getmsg.c.
16 This results in about a 5% speed improvement with four
18 kes Implement win32_chmod that uses wide characters, if possible,
19 to get and set the file attributes.
21 kes Apply pane freezing during updates patch from Riccardo Ghetta.
22 kes Rework next_vol and autoprune a bit due to failure in
23 recycle-test. prune_volumes() now returns no status,
24 but should prune at least one Volume, if possible.
25 kes Modify check_if_volume_valid_or_recyclable to reject a
26 volume with Recycle set off.
27 kes Modify prune_volumes() to continue if volume Recycle is off
28 or if the volume has expired. Add more debug.
30 kes Fix bug #1046 VolumeToCatalog incorrectly reports mounted
31 filesystems as missing on the Volume.
32 kes Rewrite the set_jcr_job_status() code to include job status
33 priorities so that more important status changes occur but
34 lower priority status changes will not overwrite something
35 more serious. This could possibly cause reporting incorrect status
36 reporting in some cases. More testing is needed to ensure
37 I have the right priorities. This vastly simplifies the previous
39 Verify Diff status should now be correctly reported, whereas it
41 kes Reduce some debug output.
42 kes Apply Joao's patch to SQLite tables to make chars work.
44 ebl Fix #1175 About update slots that don't reset InChanger flag when
46 ebl Fix #1173 where prune_volume() returns a volume from the scratch.
48 kes Remove jobq.c constraint that read and write SD must be
49 different. This may lead to more deadlocks in the SD,
50 but they should be resolved there.
51 kes Ensure that job report is always printed even if job is failed
53 kes Don't print job report twice for failed VBackup jobs.
55 kes Fix editing of retention time difference to use 64 bit
56 int instead of 64 bit unsigned. This should permit very
57 long retention periods.
58 kes Implement code to prohibit a write job from appending to a
59 Volume that will be used for a read operation. This is
60 new code and could possibly cause some conflicts.
62 kes Integrate James Harper's Exchange Win32 plugin patch.
63 kes Apply patch from Marco van Wieringen that implements the new
64 Solaris libsec interface for ACLs so that Bacula can save and
65 restore both the new ACLs and old ACLs.
66 kes Marco's patch also corrects the file dependency generation code
67 so that it works properly both with shared libraries and static
69 kes Marco's patch also includes a small cleanup of the cats Makefile
70 to remove some references to non-existent files.
72 kes Modify win32 Makefiles to use full paths in most cases.
73 In particular add MAINDIR environment variable that points
74 to the main Bacula source directory.
76 kes Add read volume list code to SD -- not yet used.
77 kes Add James' binutils patch
78 kes Split volume management code out of src/stored/reserve.c into
80 kes Modify configure to do an automatic make clean. This ensures
81 that any changes to ./configure options are handled correctly.
83 Beta version 2.5.16 release:
85 ebl Rename JobStat table to JobHistory
86 kes Ensure that only normally terminated jobs are migrated.
88 kes Add Makefile dependency when using LIBTOOL_LINK so that any
89 change in ./configure options will be accounted for.
91 kes Fix typo in the ACL patch that I overlooked.
92 kes Apply Marco's libtool include patch.
94 kes Apply Bastian Friedrich's ACL patch to eliminate ACL
95 errors during restore.
96 kes Minor cleanup of create_restore_volume_list() code.
97 kes Fix typo in console Makefile.in
99 ebl Fix #1110 about RunScript that can't execute a script with
100 Unicode characters in the path.
102 kes Apply tray-monitor patch from Bastian Friedrich to make it
103 work with the new FD.
105 kes Apply cleanup patch from Marco
106 kes Apply patch from Marco van Wieringen <mvw@planets.elm.net>
107 that implements libtool to create shared objects out of
108 the Bacula libraries.
109 kes Fix tray-monitor so it will speak to new FD.
110 ebl Fix bug with ANSI label when volume name length < 6
111 ebl Fix segfault in debug level > 50 with btape.
112 ebl Remove warning message in btape when command is empty.
113 kes Fix Win32 build to pull in new BACULA define.
115 kes Change IncludeDir to Exclude Dir Containing.
116 kes Implement code to prohibit ExcludeDirContaining in an
117 Exclude section (same for Plugin and Options). A bit
118 of a kludge with RES_ITEM2 ...
119 ebl Add field to command list to restrict Runscript console
121 ebl Use a separate JCR when running Console command with Runscript.
122 ebl Permit to mark version as Beta in some outputs
124 kes Add plugin types in jcr.h to reduce need to cast.
125 kes Do better checking of plugin return values.
126 kes Free plugin context after calling pluginFree() as
128 kes Allow plugin to call JobMessage with NULL context.
129 kes Do not add plugin to global list if loadPlugin returns error.
130 kes Rework plugin.h a bit to reduce dependence on Bacula.
132 kes Move generation of bsr file for Virtual Backup to run section
133 so that it is generated just before actually running.
134 Suggested by Graham Keeling.
136 kes Add malloc and free Bacula entry points for plugins. Increment
137 FD plugin interface version. Create a Bacula plugin context
138 structure to keep track of whether or not the plugin is disabled.
139 kes Apply FileIndex fix for plugin name stream suggested by James.
140 kes List plugins in FD status report when debug > 0.
142 ebl Add a new VerId variable that is printed in version command.
143 kes Fix migration SQL not to migrate a job that has not terminated.
144 This is a partial fix to bug #1164.
145 kes Sort JobIds returned from db_accurate_get_jobids() to fix Virtual
146 backup start time bug reported by Graham Keeling.
148 ebl Fix possible bug in cancel_job() with job that are not
151 kes Fix bat build for Win32.
153 kes Copy plugin link field into ffpkt.
155 kes Integrate patch from Kjetil Torgrim Homme <kjetilho@linpro.no>
156 It provides FileRegex in bsr files and code to collect regex
157 from the user during restore, an Allow Mixed Priorities feature,
158 and documentation for the above.
159 ebl Remove db Berkeley from configure process
160 kes Do dirty check on hostname (Linux only) and if not resolvable
161 use localhost as default.
162 kes Increase vtape max block to 20GB.
164 kes Refactor restore code to create a close_previous_stream(). This
165 This may destabilize the source.
166 kes Implement planned startRestoreFile() plugin call.
167 ebl Remove missing Loaded information from status slots storage command.
168 ebl Fix Console command problem that cancels the job
169 kes Add more plugin restore debug code.
171 kes Fix plugin_bwrite - plugin-blseek mixup pointed out by James.
172 kes Rewrite plugin restore interface a bit to correspond to how Bacula
173 creates and writes to the restored file.
174 kes Add some DebugMessage() calls to the bpipe-fd.c program.
176 kes Apply Marco van Wieringen's set of patches, cleans up Migration/Copy
177 Implement 'Pool Uncopied Jobs', allow Solaris Compiler to build
178 Bat; allow add and delete in place of mark and unmark.
179 kes Another attempt to fix the endRestoreFile plugin bug noted below.
181 kes Apply dbi driver patch from Joao.
182 kes Correct a bug in passing the context to the endRestoreFile() plugin command.
183 Bastien Friedrich reported the bug.
184 kes Create plugin instance only when FD job starts.
185 kes Add new FD plugin event: bEventCancelCommand when
186 a cancel command is issued to the FD.
188 kes Add cmd_plugin flag to jcr so we can globally know if a
189 command plugin is running.
190 kes If command plugin running, do not attempt (for the moment)
191 to get Win32 extended attributes.
192 kes Ensure that proper Win32 flags are set in bfile packet
193 if plugin_bopen() works on Win32.
194 kes Remove generated src/plugins/fd/Makefile
196 kes Implement build and install of bpipe-fd.so plugin.
197 kes Rework the interface that passes packets to the plugin
198 so that the packet is started and ended by the packet size.
199 This allows the driver to do a sanity check.
201 kes Rework the pluginIO Bacula internal code to enable
202 proper handling of Win32 error codes from GetLastError.
203 kes Apply Joao's patch to regress startover_libdbi.
205 ebl Add -B option to dbcheck to get catalog information
206 kes Fix Win32 build to include new library function.
207 kes Remove some old reader/writer code.
208 kes Implement ./configure --with-plugindir=xxx
209 ebl Fix the mysql bug in the new accurate code
210 kes Improve plugin debug. Create plugin test.
211 kes Set main thread specific data to INVALID because it
212 has no jcr. This allows debug output to work correctly.
213 kes Add src/plugins/fd/Makefile to ./configure process.
214 kes Make first cut attempt to correct SQL that computes the current
215 Pool usage. This is to fix bug #1159.
216 kes Do a bunch of plugin cleanups for Win32 and more careful checking
217 of PluginDirectory and whether or not a plugin was found.
219 kes This code should fix the race condition that leads to a Director
220 crash at job end time when the job list is updated. This was reported
222 kes Add more plugin documentation and fix include of config.h for
223 Win32 build (I hope).
225 ebl Revert to htable instead of rblist
226 ebl Cleanup accurate code (remove tcdbm parts) and use red/black
227 tree instead of htable.
228 ebl Use a dedicate DB link to compute and send the accurate list
231 kes Fix compile errors in filed/fd_plugin.c.
233 kes Remove all double quotes from SQLite creating script and
234 replace by single quotes as suggested by John Huttley.
236 kes Apply dbcheck patch from Yuri Timofeev <tim4dev@gmail.com>.
237 It significantly improves the performance of dbcheck for
239 kes Fix bad debug code call in src/filed/accurate.c
241 kes Change two Jmsgs in accurate to Dmsg to reduce unnecessary
242 output. Perhaps we really need to implement M_SAVED.
244 kes Fix bug #1156 FD crash during processing of Accurate data.
245 kes Tweaks to htable code to improved debugging and make names
246 a bit more meaningful.
248 ebl Remove time_t from update_stats()
250 kes Modify the license of the example plugin program to allow
251 it to be used by anyone for making a Bacula plugin.
252 kes Make apply_rp_codes() in bpipe-fd.c be static.
254 kes Remove Encryption and Accurate lines in vbackup output -- not used.
255 kes Fix subtle bug in vbackup by not changing DEV_RECORD packet.
256 kes Add host name to items printed during dump.
257 kes Make Check File Changes default on.
259 kes Set the default FD timeout to 3 minutes (previously 30).
260 kes Apply Bastian Friedrich's weird spelling correction patch.
262 kes Always print Verify hash differences. Rename variable to make the
263 code slightly more readable.
265 kes Correct tests for MaxFullInterval as reported by
266 Ulrich Leodolter <ulrich.leodolter@obvsg.at>..
267 kes Fix MaxDiffInterval code as well.
268 kes Enable Win32 plugin load code in lib.
269 kes Make Verify code that computes disk checksums use the same
270 algorithm as backup when dealing with sparse files.
271 kes Attempt to run VSS on any systems newer than Vista -- should
272 make it work on Windows Server 2008.
273 ebl Change the new statistic implementation. Remove the UseStatistic
274 directive and add a 'update stats [days=...]' command. You can
275 now decide when copy job records from Job table to JobStat.
276 Statistics are much more accurate with this.
278 kes Fix SQL case problem that may cause the failure of DiskToCatalog
280 kes First cut adding SD plugins.
282 kes Add Slot if it is non-zero to writing bsr file after a
284 kes Change a number of bnet_fsend() into class method calls.
285 kes Begin audit of diff of 2.4 branch to trunk code.
287 ebl Fix the mysql creation script that double-created an
288 index of the same field on the Media table.
289 Add an index to on VolumeName to the Media table for mysql.
291 kes Another try at fixing Vbackup. It looks much better this time.
292 Disable file index sanity check in FD with value stored in
293 attributes record because with Vbackup the File Index gets
294 changed, but not the attributes record.
295 Enhance some debug code.
296 Fix handling of re-indexing records that are copied in Vbackup.
298 kes Made level_to_str() know about Virtual backup.
299 kes Set correct Virtual backup write pool.
300 kes Fix compile warning in new dbcheck port code.
301 kes Fix migration code broken by previous virtual backup fix.
303 kes Fix problem of Virtual backup not writing a sequential FileIndex.
304 kes Reset Virtual backup time/date to the value from the last backup.
305 kes Ensure that storage name is passed to SD on read.
306 kes Correct a problem with Level and Virtual backup, rework how
307 bsrs are printed in debug to use standard routine.
308 kes Apply patch from Chris in bug #1133 that provides alternate db port
310 ebl Remove catalog dependency from bcopy tool.
311 ebl Modify catalog scripts to have an easier packaging integration,
312 using default variables.
313 Make difference between SQLite3 and SQLite in db_get_type()
315 kes Apply most of changes in a patch from:
316 Michael Stapelberg <michael+bacula@stapelberg.de>
317 that allow the Bacula FD to compile on IRIX 6.5.
319 kes Apply patch from Bastian Friedrich that accepts a yes on a
320 delete volume command line.
321 kes Attempt to fix bug #1128 InChanger flag cleared during Migration
322 job when reading from one autochanger and writing to another.
323 kes Minor tweaks (copyright dates convert to use method instead of bnet).
325 kes Fix NULL Volume error when reading (or Migration or VBackup) must switch
326 drives when no tape is mounted.
328 kes Add additional info to some SD messages.
329 kes Add fix supplied by Martin Simmons for turning off EOL character
330 in new console multi-command code.
332 kes Fix a Verify InitCatalog problem where in certain cases
333 a garbage filename may be entered in the verification database. This
336 kes Add VSS 64 bit dll entry point in src/win32/filed/vss_generic.cpp
337 sent in by Riyas Yoosuf.
339 kes Fix seg fault in Dir during estimate command with no level value
340 given. This fixes bug #1140.
342 kes Add message to migration job when the target job is already migrated.
343 This closes bug #1129.
346 kes Raise some restore debug levels.
347 kes Replace off_t by boffset_t where ever I found it.
349 kes Define a machine dependent ioctl request type for use with
352 kes When a migration job actually runs, re-check the Job record
353 and skip if the job is already migrated. This should
354 significantly reduce the problems with bug #1129.
356 kes Set MALLOC_CHECK_=0 in environment before starting Bacula to
357 turn off glibc checks that prevent getting good dumps.
358 kes Implement console 'wait mount' command. Doesn't yet work.
359 kes Implement timeout=nn on console 'wait mount timeout=nn' command.
360 kes Break the do_swapping into do_unload, do_swapping, and
361 do_load. It is much more logical that way.
362 kes Implement a set_dcr_from_vol subroutine in acquire.c for
363 reading volumes. This allows the dcr to be refreshed after being
364 zapped when the wrong volume is mounted.
365 This should fix bug #1126 -- During multiple tape restore, bacula
366 does not ask for physical tape change, but rereads same tape
368 kes Apply patch submitted for bug #1107 with a small modification.
369 This fixes a bug where bcopy copied too many records.
370 kes Make some tweaks to bsmtp based on patch submitted in bug #1124.
371 This fixes bug #1124.
372 kes Make the default bat restore Pool be Any. This fixes bug #1118.
374 kes Remove debug statement that crashes the SD at the end of
375 a tape during restore. Fixes bug #1125.
377 kes Implement Win32 bat changes made to Branch-2.4
379 kes Tweak separator command in console to start disabled and
380 allow defining no separator character. Also make code a
381 bit more fault tolerant.
382 kes Make btraceback write the traceback to the working directory
383 before attempting to mail it.
384 kes Add a RFC to Projects.
386 kes Attempt to implement a kludge to make Qt work with bat
388 kes Setup rstorage correctly. Virtual backups are working.
390 kes Move setting JobLevel and JobType into a method, which should
391 allow completing Virtual Backups.
392 kes Fix verify jobs to work again.
394 kes Virtual Backup tweaks -- it is close to working.
396 kes Ensure that SD tried to mount a volume not in an autochanger
397 at least once before asking for operator intervention.
398 kes Make SD aware of Virtual Backup jobs.
399 kes Add VirtualFull for bat.
400 kes Changes to get read storage correct for Virtual Backup.
402 kes Remove old code from label.c
403 kes Split display_display_info() out of write_bsr_file()
404 kes do_vbackup_init() working -- i.e. bootstrap file built.
405 kes Change Bacula trademark owner from John Walker to Kern Sibbald
406 kes First non-working cut of vbackup
407 kes Correct FD heartbeat code to use volatile variable accessed by
409 kes Zero thread id with memset if on Win32 in case it is a struct.
410 kes If cannot create JobMedia record, continue to try to write eof
411 and clean up in block.c
413 kes Add code to interface OpenSSL to new Win32 pthreads code which
414 used a structure for thread_t.
416 ebl tweak bat for win32 compilation
418 ebl Remove tokyo cabinet from the source
419 ebl Update configure/autoconf to support berkeley DB
420 ebl Add a sort to db_get_file_list() to improve bsr construction time.
422 kes Add a mtx-changer.conf file that is not overwritten during
423 an upgrade. It fully configures the mtx-changer script.
424 kes Clear in-use bit on vol when unused while swapping.
426 kes Remove sleep at end of ./bacula
427 kes Clear hash packet for hardlinked files correctly. This corrects
428 a long standing bug where hardlinked files selected individually
429 would occasionally not be restored.
431 kes Apply Eric's patch to ensure that autoprune does not return
432 a Volume not in the autochanger unless requested to do so.
433 kes Correct bat restore display of multiple drives. This fixes
435 kes Do find_a_volume() each time an unload is done. This
436 fixes the failure of maxvol2-test.
438 kes Add some SD debug code.
439 kes Do find_a_volume() each time an unload is done.
440 kes Apply Joao's DBI patch that adds easier configuration of DBI drivers,
441 and adds --with-db-port to ./configure.
442 kes Use Qmsg() in job.c watchdog callback.
444 kes Release main control rwlock if ABORTing.
445 kes Make watchdog connect timeout queue messages rather than sending
446 directly to avoid lock conflicts with the real thread.
447 kes Add const char in dbd.c to avoid compiler warnings.
448 kes Fix python compiler string warning. Note, IMO the GNU C++
449 compiler guys have made a *very* bad change to their compiler.
450 They now force all strings to be 'const' unless you explicitly
451 cast them, which is extremely ugly and ruins nice code as well
452 as creates a lot of useless work.
454 kes Fix mtx-changer to detect both versions of Ubuntu (Debian)
455 mt. This fixes bug #1116.
456 kes Add const in python files to reduce compiler warnings.
457 This may have to be backed out because of later compiler
459 kes Fix failure of 2drive-concurrent-test. Always read label;
460 clear_unload() only after drive is defined in acquire_for_read().
462 kes Generally clean up the manual tape loading code. The main
463 conceptual change is that when a volume is marked to be unloaded,
464 its volume name is retained, and it is only marked as unloaded
465 when either the autoloader says it is unloaded or another tape
466 is read on that drive.
468 kes Add debug code and refactor subroutine in stored/mount.c
469 kes Fix format problem in bscan output reported in bug #1105.
470 ebl Fix get_next_volume_for_append logic with autochanger
471 - use pruned volumes if found
472 - don't reset the inchanger flag after getting a recycled volume
474 Fix recycle_oldest_purged_volume to take InChanger flag in account
476 ebl Add mmap/unmmap implementation for tokyodbm under win32
478 kes Make first step toward eliminating globals from config
479 scanning. Also should be a workaround for FORTIFY_SOURCE
480 GNU C bug -- fixes bug #1042.
482 kes Apply duplicate job tests to restarted jobs.
483 kes Copy more data when restarting a job so that run
484 overrides are kept. This should fix bug #1094.
486 kes More word alignment cleanup.
487 kes Fix bug where SD did not ask operator if the device could not
488 be opened. Reported by Eric.
490 kes Add dbuser to DIR conf file (replaces user).
491 kes Add --with-db-password to ./configure
492 kes Fix regress to handle db_password.
493 ebl Add new 'status storage slots' that list autochanger
495 ebl Update vtape driver to compile only under Linux.
496 ebl Fix a bug when restoring with a wrong mediatype.
498 kes Eliminate ints from conf files and structures to avoid
499 word alignment problems
501 kes Fix bug reported by Scott Barninger where the bacula script
502 refers to scripts in the wrong directory. Needed to meet the
503 requirements of recent FHS location changes.
504 ebl Disable vtape for FreeBSD.
506 ebl Modify disk-changer to check if slot contains something before
509 ebl Fix vtape on win32 and debian.
510 ebl Fix autoselect patch (cause segfault).
512 ebl Fix autoselect option broken for a while. Fix #1089. Need some
513 work with StorageId to be able to use a particular drive in a
516 ebl Rename vtape to vtape.
517 ebl Update vtape driver.
519 ebl Modify vtape driver to avoid sparse file.
520 kes Add make clean of qt-source directory during ./configure
521 kes Store last block number written to tape in DEVICE and
522 use it for testing for correct last block on EOT.
524 Release Version 2.4.0:
528 kes Make sure to clear JS_WaitMedia when operator mounts a Volume.
529 This fixes bug #1095.
531 kes Add create_postgresql_database.sql to Win32 installer. Should
532 fix problem reported by Juilio Monteiro.
533 kes Get correct slot when auto unloading a device. This fixes bug
536 kes Fix multiple media restore.
537 kes Make DEVICE Slot private and access it via a method.
538 Allows better control over when it is set and cleared.
539 kes Fix possible seg fault if SQL error.
541 kes Add Martin's fixes to argument scanning for the estimate
542 command. This fixes bug #1093.
543 kes Add debug code to SD.
544 kes Fix renaming a Volume, which used the wrong Volume name.
546 kes If operator has rewind tape, print warning, release tape and
547 try once more. If tape is positioned somewhere, something went
548 wrong, so mark the tape in error and try once more. Previously
549 this error was fatal, now it produces an error message.
550 kes Ensure correct volume name displayed during restore
551 kes Ensure that Volume is mounted for restore.
553 kes Fix a few more Coverity reported problems.
555 kes Apply Allan Black's status dir job count patch.
556 ebl Add information about IMPORT/EXPORT slots in mtx-script.
557 kes Enhance a couple of SD debug messages.
558 kes Tweak unload flag setting and ensure it is set during swap.
560 ebl Fix #1091 about bad output in estimate command.
562 kes Modify autochanger locking to attempt to avoid race
564 kes Make sure device not busy before doing label command.
565 kes Display open() errors except when polling. Previously too
566 many were suppressed. This should fix bug #1070.
567 kes Fix Win32 reparse points. Bacula will not recurse into any
568 reparse point directory, including mount points, unless the
569 directory is explicitly mentioned at the top level (same as
570 with Unix). A file that is linked to another file will be
571 backed up -- much as Unix does for hardlinked files.
572 This fixes bug #1041.
574 kes Remove double quotes from ChangeLog and ReleaseNotes
575 kes Remove StorageId test when pruning and recycling (Eric's changes).
576 kes Remove old form of locking when getting volumes -- causes deadlock.
577 kes Change bat dirstat layoutWidget to dirstatlayoutWidget to make
578 the name unique and to eliminate compile time error.
579 kes Add accurate.o to Win32 FD Makefile
581 kes Fix cats dll build on Win32 after db_update_job_end_record
582 calling sequence change.
583 ebl Switch to tokyo dbm instead of htable in accurate code
584 ebl Include tokyo dbm to bacula source tree
586 kes Fix buffer overruns detected by Coverity.
588 kes Tweak joblog display.
590 kes Implement --without-qwt
591 kes Fix layout of restore tree dialog
592 kes Add configure bat QWT libraries, so that bat can be built
593 with or without the QWT libaries.
595 ebl Add dummy tape driver for regression tests.
596 kes Make sure we unload the right slot when swapping.
598 kes Add debug times, reduce size of two-pool-changer test
600 ebl Tweak autoconf scripts for vtape
602 kes Improve SD reserve debug code.
603 kes Testing an improvement to free up volumes no longer in use.
605 kes Rework SD acquire for read to handle autochanger Volume
607 kes Implement regression that explicitly tests swapping a Volume
608 from one drive to another.
609 kes Enhance disk-changer to detect most error conditions.
610 kes Fix SD code so that it properly swaps a Volume between drives.
611 This fixes bug #1083.
613 kes Apply libdbi patch from Joao Freitas for regress and for
614 Bacula trunk. Regress now works with libdbi. Nice.
615 kes Apply .nobackup patch from bug #1077 submitted by
617 kes Apply Bastian Friedrich's patch that adds %p to edit the pool
618 name into jobs cloned via the run directive.
620 kes Prevent a Volume that is being swapped from being freed from
621 the volume list. This will most likely fix, at least partially,
623 kes Fix strippath so that it does not get a buffer overrun and crash FD.
624 This fixes bug #1078.
625 kes Remove 50 millisec wait in SD that broke debugger.
626 ebl Add MaxRunSchedTime option that specifies the maximum allowed time
627 that a job may run, counted from when the job was scheduled.
628 ebl Fix MaxWaitTime option that specifies the maximum allowed time that
629 a job may block waiting for a resource, counted from when the job starts
630 ebl Rename (add) Max(Incr|Diff|Full)WaitTime to Max(Incr|Diff|Full)RunTime
631 kes Apply patch from bug #1076 by Tullio Andreatta <t.andreatta@troppoavanti.it>
632 that implements multiple commands per line in the console when using
633 readline. Modify the default to use a semicolon as the command separator.
635 ebl Fix SQL query in migration code.
636 ebl Make accurate mode with hash disk pass regression tests
638 ebl Implement first cut of accurate backup with hash disk.
640 kes Force unload of volume when wrong volume mounted in SD.
642 kes Fix bat seg fault at termination.
643 kes Add Bacula generated version to bat about box.
646 kes Experiment with allowing multiple read jobs.
647 kes Move final volume swapping code to DCR method and
648 call it from acquire_for_read().
649 kes When wrong volume is mounted during read, unload_autochanger.
651 kes Integrate the libdbi changes from Joao Henrique Freitas
653 kes Stop searching for Volumes in SD askdir if DIR returns the
654 same volume name twice in a row.
655 kes Close bat console windows first to eliminate error message
658 kes Tweak the swap Volume from one drive to another code so that
659 it now seems to work.
660 kes Resolve several problems with recycling that broke the new
661 code (these problems are in 2.2.9 as well).
662 kes Remove the volume lock when calling the sysop code.
663 kes Don't mark a reserved volume with no writers as unused otherwise
666 kes Rework class structures for VOLRES, DCR, and DEVICE to make
667 the method names a bit more logical, and for more logically
668 handling the responsibilities.
670 kes Remove redundant code in terminating the scheduler that just
671 causes a seg fault in many cases.
672 kes Cleanup releasing a volume and make it a DCR method.
673 kes Improve algorithm for detecting pre-reserved volume and
676 kes Tweak volume swapping code so it works.
677 kes Correct name overloading in mount.c
678 kes Replace released flag in VOLRES with reserved and add access
679 methods for the VOLRES class.
680 kes Prevent volume from being released while being swapped.
681 kes Apply Bastian Friedrich's edit codes patch for the bpipe-fd
682 plugin that add %w (where) and %r (replace flag) editing to
684 kes Apply Bastial Friedrich's edit pool=%p patch for run clone
686 kes Refactor parts of stored/mount.c
688 ebl Add sanity checks for VolWriteTime and VolReadTime
689 ebl Take care of bad clock changes while computing VolWriteTime
690 and VolReadTime. This should fix or limit #1066
691 kes Correct error string numbers in dird/catreq.c
692 kes Restructure reserving, acquiring, and mounting volumes. Calls to
693 autochanger are deferred for mount.c -- simplifes the code.
695 kes Do not prune any running job. It just fails the job.
696 kes Lock the volumes when changing dev->reserved_device and marking
697 the volume unused otherwise the device can get reserved by
698 another job before the volume is released, thus blocking it.
700 kes Correctly detect Ubuntu systems, and add ubuntu platform directory.
701 kes Fix bug #1063, reuse of freed ptr in list nextvol.
702 kes Release regex compile buffer in filed/job.c
703 kes Add proper type of const char in sql_create.c
704 kes Turn off debug in daemon termination routines
705 kes Move free_volume_list() before devices are freed in stored.c
706 kes Fix reference to uninitalized stack variables in bregex.c.
707 This should correct bug #1067.
709 kes Fix possible seg fault in SD when freeing a volume entry.
711 kes Implement unload_dev() before swap device.
712 ebl Add statistics prunning with option and menu
713 kes Separate unload_dev() from unload_other_device() in autochanger.c
715 kes Apply patch from bug #1069 that corrects spurious error messages
716 when ACLs enabled on SGI but no ACL exists.
717 ebl Fix small segfault in bacula-sd when debug level is 500
718 kes Modify run_program() and run_program_full_output() to use
719 call by reference for the results string. This corrects a long
720 standing problem where the address of the string may be changed
721 in the subroutine but not in the calling program.
723 kes Re-enable code to remember last volume mounted on a non-tape
725 kes Add patch supplied in bug #1068 that fixes a SD crash when using
726 a Virtual autochanger.
727 kes Generate correct JobMedia records during spooling/despooling when
728 running concurrent jobs. Thanks to Tom Ivar Helbekkmo
729 <tih@hamartun.priv.no> for excellent analysis and testing.
731 kes Tweak hash algorithm for htable using Martin Simmons idea
732 for doing a circular shift.
733 kes Remember what volume is in VTLs (previously turned off for
735 kes Analysis of JobMedia records by Tom Ivar Helbekkmo <tih@hamartun.priv.no>
736 pointed out some problems in creating JobMedia records during
737 spooling with concurrent jobs. Fix the problem by updating the
738 start file position before despooling and generate a jobmedia
739 record at the end of despooling.
741 kes Fix handling of JobMedia records during spooling and when a
742 Volume is changed without actually writing data to the Volume.
744 kes Rework certain SD locking based on gdb tracebacks of deadlocks
745 sent by Eric. This code now uses only the volume_lock() rather
746 than the reservations lock when at EOM and acquiring a new
748 kes Ensure only one exit point in several subroutines.
750 kes Implement bsock code to permit locking. Use the new code in Verify
751 in the FD to prevent the heartbeat thread from disrupting the Verify
752 data sent to the Dir.
753 kes Modify SD locking to eliminate locking the reservations system from
754 outside the system. Use the volume lock when getting media data
755 and reserving a new volume at end of media.
756 kes Add Eric's volume_unused() fix to stored.c so that Volumes found
757 when SD starts are not locked into place.
759 kes Fix error compiling runscript code on 64 bit machines.
760 kes Tweak Win32 mount point code.
761 kes Fix a couple of bugs in the accurate code (bad sscanf, buffer not
762 cleared giving bad file estimate).
763 kes Implement BIG_MALLOC in htable code. Runs 2.5 times faster for
766 kes Keep Schedule run lists in order as suggested by
769 kes Implement autostart scripts for Debian.
770 ebl Implement upgrade catalog scripts.
772 ebl Apply jobstat patch for long term statistics. Have to implement
773 purge stats command and upgrade scripts.
774 kes Fix mtx-changer.in for broken Debian mt program.
776 kes Fix large number of JobMedia records reported by Eric Bollengier.
778 kes Apply doc fix from bug #1062.
779 kes Resolve crash and improper restore wx-console Win32 restore
780 GUI. Fixes bug #1065.
781 kes Update Win32 wxWidgets to latest version.
782 kes Attempt to do correct handling of Win32 mount points. Should
784 kes Fix Win32 FD backup/restore memory leak due to improper termination
785 of BackupRead/Write. This fixes bug# 1038.
787 ebl Reduce memory usage for accurate backup, working only with ctime
788 and mtime. (not all Lstat field)
789 About 40MB for my Linux system (400.000 files)
791 kes Add dcr->reserved_volume flag that allows us to release a volume
792 even if it is not vol->released. This allows maxvol2 to work when
793 Volumes expire and we are already writing to the device (i.e. a
794 volume is pulled out from under us by another job terminating after
795 we reserve the drive).
797 ebl Permit multiple command/console per runscript definition.
798 RunScript { command = /bin/true ; command = /bin/false ... }
799 ebl Add RunsWhen = AfterVSS to runscript. You can execute a command
800 (restart an application) just after the VSS snapshot on windows.
801 kes Don't zap dcr values during release_volume() as they might
802 have the next Volume to be mounted.
803 kes Fix AIX prototype.
805 kes Second cut of drive switching during backup.
808 kes Update Win32 version of wxWidgets to most recent version.
809 kes Tweak Copy job details.
810 kes Rework dir_find_next_appendable_volume to make a bit more effort
811 to find a suitable volume before giving up.
813 kes Make ask_sysop_to_create... to return if waken from wait.
814 This helps get out of blocked conditions.
815 kes Experimental implementation of switch_device in reservations.
816 kes Implement FD version to allow easier protocol changes.
817 kes Add Plugin Options string -- not yet passed to FD.
818 kes Implement PluginOptions ACL.
820 kes Attempt to correct problems with restores with autochangers and
821 use counts going negative
822 kes Rework SD status command and implement API for bat. Implements
823 header, runing waitreservation, devices, volumes, spooling,
824 and terminated status keywords.
825 .status storage=xxx <keyword>
826 kes Clarify TLS error message by adding double quotes around name.
827 kes Simplify SD/FD status code by putting api flag in STATUS_PKT
828 kes Pass jcr to tls routines so debug messages can be handled better.
829 kes Rework jobq resource allocation code, and possibly fix a bug
830 that caused reference counts to get out of sync.
832 kes Rename fd/dir plugin to use Bacula standard underscore.
833 kes Plugin work -- bring dir up to fd level.
834 kes Start implementation of VTL code
835 kes Fix Win32 build after adding new cats subroutine.
837 kes First cut at Duplicate Job implementation.
839 kes Fix bugs in MaxFullInterval and Implement MaxDiffInterval.
840 kes Start PluginOptions string, and refactor a bit of ua_run.c
841 ebl Apply Allan patch that permit to reset recyclepool.
843 kes Test patch -- possible fix or improvement for bug #1053
844 kes Refactor FD and SD status commands to permit new API code in
845 SD, and to fix Win32 build.
846 kes Win32 build is now working.
848 kes Implement 'MaxFullInterval' and start 'MaxDiffInterval' based on
849 some ideas in patch from Scott Bailey.
850 kes Begin implementation of duplicate Job control.
851 kes Fix some of Win32 build after recent additions.
852 kes Apply patch from Frank Kardel that implements 'honor no dump flag',
853 which causes the FD to detect whether or not the OS has the
854 honor no dump bit (*BSD systems), and if so, to skip backing up
855 any file with this bit set. The feature is enabled by setting
856 'honor no dump flag = yes' in the Options section of a FileSet.
858 kes Correct po warning message with datarootdir
859 kes Implement more code in dird.c to put configuration parsing in
860 a class rather than use globals.
861 kes Restructure SD status command for implementation of bat API
864 kes Suppress incorrect 'Will not descend from x into y' messages.
865 kes Eliminate FORTIFY_CODE=2 bug, and make first cut at removing
866 daemon globals used by parser.
867 kes Apply Joao's patch to separate DB_TYPE and DB_PROG in configure.
869 kes Fix free of plugin_list when none exists.
871 ebl Apply accurate project patch.
873 ebl Fix a segfault when using strip_path option. (Use of pm_strcpy
874 on non-mempool object)
875 kes First cut of converting FD .status to work with bat API.
877 .status client=XXX header
878 .status client=XXX running
879 .status client=XXX terminated
880 kes Implement first cut of Copy Job.
881 kes Implement Catalog in Pool resource. It overrides catalog specified
882 in the Client resource.
884 kes Apply patch (with some difficulties) from Joao Henrique Freitas
885 <joaohf@gmail.com>, which adds support for libdbi as a Bacula
887 kes Add patch from Martin Schmid scm@apsag.com that checks to see if
888 ftruncate() actually works. In the case of some (cheap) NAS devices,
889 it does not, and so recycling NAS Volumes does not work. The code
890 simply unlink()s the file, then recreates it. This fixes bug #1011.
892 kes First incomplete cut of big malloc blocks for htable.
893 kes Tweak plugin code.
895 kes Plugin debug code + tweak a couple bat dialog layouts
897 kes Fix creating first JobMedia record during Migration to include
898 proper index. This caused slow restores of migrated jobs.
899 kes Temp fix to plugin name file_index.
900 kes Bacula backed up and restored a MySQL database.
902 kes Implement plugin restore.
903 kes Implement parsing of db_driver to give db_type index.
905 kes First cut of plugin restore code.
906 kes Fix bug #1047, which had a heap overrun when stripping certain paths,
907 and do not strip paths on symbolic links.
908 kes Set catalog backup database and user name from values specified on
909 the ./configure line.
910 ebl Fix #1031 about wrong pool source information in job report.
913 kes Remove a redundant jcr argument to find_files, match_files, and
915 kes Implement '.status dir header|scheduled|running|terminated' that
916 prints the requested status section. With the exception of the
917 header, the other reports have fields separated by tabs (\t).
919 kes Apply patch from Peter Much <pmc@citylink.dinoex.sub.org> that fixes
920 a resource embedded run command to find a since time if no explicit
921 since time was supplied on the command line.
922 kes Apply state-file.patch sent by Allan Black <Allan.Black@btconnect.com>
923 that updates the state file at job termination time in addition to
924 when the daemon terminates.
926 kes First version where a plugin did a backup.
927 bpipe-fd.so created a backup file, wrote a test
928 string to it, and Bacua could restore this fabricated file.
930 kes Implement DB Driver = string for the DBI driver.
931 kes Remove all old bdb_xxx.c code. Add dummy routines to bdb.c
932 kes First cut of code for loading Win32 plugin dlls. Implement
933 dlopen, dlsym, dlclose, and dlerror in src/win32/compat/compat.cpp
934 and implement a dlfcn.h file based on opengroup's definitions of
937 kes First cut plugin directives.
939 kes Apply patch from bug #1049 to prevent stripping the path on a
941 kes Attempt to fix bug #1047 where stripping a path corrupts the
942 heap. Waiting for feedback.
943 kes Correct the Mount message not to suggest labeling a new tape
944 when doing a restore. Submitted by email by John Stoffel.
945 kes Attempt to work around gcc FORTIFY_SOURCE bug that crashes the
946 FD by using casting. Reported in bug #1042.
948 kes A bit of crypto cleanup. More later.
950 Release Version 2.2.8
952 kes Apply patch from Martin to correct bug #1040, bscan sets existing
954 kes Fixed important spelling error in doc -- bug #1045.
956 ebl Fix bextract to be able to extract non-portable Win32 data to
958 kes Move initialization of read/write res lock earlier in the code.
959 This fixes the crash with a null conf file. This fixes bug
961 kes Redefine CURES in lib/parse_conf to be URES and move it all
962 into lib/parse_conf.c -- this responds to bug #1042, but does
963 not fix it. The fix is not to compile with FORTIFY_SOURCE.
964 kes Backport to 2.2.8 fix de-referencing a NULL pointer in the scanner from
965 the trunk SVN. I don't think this was reported as a bug.
967 ebl Fix a bug during tape initialization with MTSETDRVBUFFER.
969 kes Fix Win32 build with new .def files and DLL_IMP_EXP ...
971 kes Add DataDespooling and DataCommitting status (committing is
972 the last despooling).
973 kes Finish implementation of new reservations code noted below.
975 kes Fix bsnprintf for float point numbers. I broke recently when
976 parameterizing some variables. This fixes bug #1036.
977 kes Undo recent reservations changes ... will apply them later
978 when they work better.
980 ebl Fixes #1034 which cause mysql to hang the connection after 8h
981 ebl Change default statistics target of filename.name and path.path
982 fields for PostgreSQL. This speeds lookup by indexes. Thanks
984 kes A few more tweaks to new reservation code. Make sure to clear
985 vol released flag when retaking volume. When reading label and
986 label is bad mark volume unused. When recycling, mark volume
987 unused so it can be renamed.
989 kes Fix reserve_volume() so it doesn't release a volume in use
990 (i.e. a volume entry not marked released). This should be
991 the last part needed to fix bug #1018.
993 kes Move Heartbeat documentation from Job to Director resource.
994 This fixes bug #1033.
996 kes Fix existing switch drive SD code to call autochanger to release
997 any old volume. This must be done to keep the autochanger from
998 releasing subsequently newly reserved volumes in doing a close().
999 This should fix bug #1018.
1000 kes Fail if attempting to get console input in batch mode. This
1001 should help fail RunScript console commands that are incomplete.
1002 kes First cut implementing switch_drive() in SD (not actually called).
1004 kes Implement first cut running console commands in a RunScript.
1006 ebl Fixes bug #1028 where 'Selection Type' option was not usable
1008 ebl Fixes bug #897 and bug #1005 where bacula doesn't display runscript
1011 Release Version 2.2.7
1013 kes Add new free_tls() entry point so that Win32 builds.
1014 kes Fix compile warning in src/lib/util.c
1015 kes Fix entry point for edit_job_codes() so that Win32 builds.
1016 kes Fix seg fault Frank Sweetser reports in regression testing
1017 on his systems. The problem was that the original author of
1018 bsnprintf.c did not take into account the side effects of
1019 using ++x in the argument to a #define.
1020 kes Make SD protocol backward compatible with version 2.2.x.
1022 ebl Fixes bug #1015 where bacula failed to restore acl to a socket
1023 because Bacula no longer restores sockets.
1024 ebl Always use ignorecase fileset option on win32 FD.
1026 kes Apply patch from Michael Stapelberg <michael@stapelberg.de>
1027 that implements double quoting include names in conf files,
1028 and also allows piping input by having the first character
1029 be a vertical bar (|).
1030 kes Apply patch from Bastian Friedrich <bastian.friedrich@collax.com>
1031 that implement %f in RunScripts to pass the FileSet name.
1032 kes Skip leading | when lex input comes from a pipe as suggested
1033 by Michael Stapelberg <michael@stapelberg.de>.
1035 kes Apply patch for bsmtp Win32 daylight savings time fix supplied by
1036 Nerijus Baliunas <nerijus@users.sourceforge.net>
1038 kes Implement Plugin Directory and plugin events.
1040 kes Implement a security enhancement: TLS authentication but no
1041 encryption. Enabled by setting 'TLS Authentication = yes'.
1042 Note when this is on, TLS encryption is turned OFF!
1044 kes This patch corrects a problem where the maximum concurrent storage
1045 jobs counter gets out of sync during restore jobs causing jobs to
1046 'wait on max Storage jobs'. This patch fixes bug #1009.
1048 kes This patch fixes bcopy so that it produces correct Volumes.
1050 kes This patch eliminates spurious output to the console during a VerifyVolume
1051 job that contains encrypted data. It fixes bug #1024.
1053 kes This patch prevents the 'status dir' command from trying to use a scratch
1054 volume and possibly moving it from one pool to another. This patch fixes
1057 kes Add new include to postgresql.c suggested by Marc Cousins so
1058 that it compiles correctly with pgre version 8.3.
1060 kes Fix --archivedir addition to configure. Replace it with
1061 --with-archivedir in configure.in This fixes the regression
1063 kes This patch fixes bug #1012 where the job is canceled because
1064 of Max Run Time exceeded when the job has not yet started.
1066 ebl Apply Richard Mortimer patch that fixes #1016 when there are more than
1067 one 'part' to write. Instead of each part being stored on disk,
1068 written to DVD, then deleted from disk, all parts are written to disk,
1069 and only the last is written and deleted from disk.
1070 kes This patch fixes the status command to include the formating string for
1071 JS_AttrInsterting. It fixes bug #1021.
1072 kes This patch should fix the Mac OS X build problem on the latest
1073 Darwin, where sys/types.h was not included correctly (apparently
1074 due to a change in the Mac headers). The solution was to explicitly
1075 ensure that it is defined for the ./configure.
1076 This patch also has a rebuild of configure that includes the Debian
1077 qt4 patch to check for qmake-qt4. This patch fixes bug #1020.
1078 kes This patch should ensure that queued messages to the console are
1079 displayed as soon as possible. It should fix bug 1007, but has been
1080 reported not to work.
1082 kes This patch fixes the infinite loop when trying to increase the
1083 maximum number of volumes in a Pool during the add command.
1084 This patch fixes bug #1008.
1086 Release Version 2.2.6
1088 db Remove extra data on estimate command in joblist for bat.
1090 kes Cleanup of code in SD that sets the LastWritten date. This doesn't
1091 really change anything, but is the beginning of doing it *right*.
1092 To do it completely right the LastWritten date must be passed to
1093 the SD, but it is not yet done.
1094 kes Minor tweaks to some bat restore SQL.
1095 kes This patch fixes bug #1003 where putting the message output from
1096 a Verify job into the catalog results in a recursive loop. The problem
1097 seems to show up only with postgresql (to be verified).
1098 kes Correct %x to %p in postgresql debug statement.
1100 kes Fix bug #942 where lots of emails where generated when the heartbeat
1101 interval was low and Bacula wanted a different tape from the one in
1104 ebl Add new SD despooling attributes and Dir inserting attributes
1105 job status codes in the catalog (Status table).
1107 ebl Use qmake-qt4 instead of qmake when available (debian system).
1109 kes Add a security warning to src/cats/make_catalog_backup.in indicating
1110 that passing the password via the command line (arg 3) is insecure.
1111 This responds to bug #990 (it doesn't fix it).
1113 kes Set default debug_level to zero. This corrects bugs #991 and #993.
1114 kes Fix a crash in bat when it cannot connect to the Director for example
1115 if the Director is not running.
1116 kes Remove redundant INDEX (JobId) from File table in the trunk.
1117 This fixes bug #992.
1118 kes Make explicit exception to GPL in LICENSE to permit linking
1119 the Win32 FD with Microsoft VSS code.
1120 kes Apply the Solaris package patch from
1121 Masopust, Christian <christian.masopust@siemens.com>
1122 kes Apply the patch to optionally add a timestamp in the debug output
1123 submitted by Mariusz Czulada <manieq@wp.eu>.
1125 ebl Use PQerrorMessage instead of PQresultErrorMessage in postgresql
1126 backend (sql_strerror). Fixes bug #989
1128 kes Apply Michael Short's <mdshort@gmail.com> Win32 regress patch.
1129 It applied with no problems.
1130 kes Add PATH command to SunOS part of mtx-changer.in so that sed and
1131 awk are on the path.
1132 kes Redirect stderror to stdin on mt status command in mtx-changer.in
1133 since the status is returned on stderr on Solaris.
1134 kes Activate Close button on tray-monitor window. This fixes
1136 kes Check for NULL item in parse_conf.c before calling it. In the
1137 case of Device, there is no item and this caused a seg fault when
1138 Device appears in the conf file.
1139 kes Add a #define __CONFIG_H when including config.h in bacula.h. This
1140 avoids pulling in config.h multiple times in some new code.
1142 kes Fix spurious warning message printed when creating a volume with
1143 a LabelFormat. This fixes bug #976.
1145 Release Version 2.2.5
1147 kes Add JobId in place of Job name in all the Jmsg() output.
1148 kes Correct the APP_DESC for the Win32 storage service (remove an e).
1150 kes Make maxvol-test and new more strict maxvol2-test work.
1151 kes Print JobId in all Jmsg() job output.
1153 kes Add new SD despooling attributes and Dir inserting attributes
1154 job status codes. This fixes bug 961.
1155 kes Fix Win32 drive display in bat version browser. Fixes bug #962.
1157 kes Fix doc issue. This fixes bug #963.
1158 kes Fix listing performance problems in bat. Pointed out by
1160 kes Remove old debug code.
1161 kes Fix bat code that tests for Win32. This should fix bug #968
1162 kes Query 5 list wrong Vol after migration. This fixes bug #960
1164 ebl Fix #969 where user can't change Replace option in restore menu.
1166 kes Save jcr in thread specific data (tsd) for each thread.
1167 kes Make Dmsg() print JobId as -%u.
1168 kes Make Jmsg, Emsg, and others automatically pickup the jobid
1169 for the thread if it exists.
1170 kes Remove old reservation debug jid code.
1171 kes Remove get_jcr_from_tid() from OpenSSL and tls code.
1172 ebl Add an option that permit to specify spool size in job
1173 definition. (Applying patches/testing/spoolsize_per_job.patch).
1174 You must upgrade SD and DIR at the same time.
1175 dvl Add new configuration item --archivedir
1176 dvl Adjust regression tests to use tmp not /tmp. This will allow
1177 multiple concurrent runs of the regression tests.
1179 kes Fix race condition that drops final block written to volume.
1180 This happens in rare cases with multiple simultaneous jobs
1181 when the Volume fills. This fixes bug #964. May be related
1182 to bug #935 and possibly #903.
1183 kes Eliminate more strerror() and replace with bstrerror().
1184 kes Remove BSD getopt and replace with unrestricted IBM version.
1185 kes Fix Win32 build for changed calling sequences.
1186 kes More tweaks to the mount volume routines to get everything
1187 right. Changed variable name from find to have_vol, which is
1188 much easier to understand.
1189 kes Enhance btimer debug code.
1191 kes Fix FD->SD authorization failure, which was due to spurious
1192 wakeups from a pthread_cond_timedwait(). Simply check the
1193 predicate before continuing. This fixes bug #953.
1194 kes Add const char where needed (more to do). Remove temp debug code.
1196 kes Setup SQLite busy handler before doing queries. Fixes bug #967.
1197 kes Don't overwrite error message in check_tables_version.
1199 kes Unlock batch insert tables with same calls used elsewhere.
1200 kes Allow starting 59 jobs a second.
1201 kes Make SD session key more random.
1202 kes Add retry for SQLite opening db if it fails. Probably helps
1204 kes Suppress extra error messages during batch insert failure.
1206 kes Add jcr to timer packets so if killed message can be sent to job.
1207 kes Add JobId to all Dmsg() output.
1208 kes Put some FD auth code on dbglvl rather than fixed.
1209 kes Return insert attributes error message in db msg buffer to avoid
1210 false error messages. Helps fix bug #966.
1211 kes Separate batch init error messages. Probably helps fix bug #966.
1212 kes Make SD code that contructs attribute insert check string lengths
1214 kes If Dir gets an error during inserting attributes, cancel SD.
1215 This reduces unnecessary error messages.
1217 kes Correct search boolean for getting Volume info
1218 ebl Cleanup batch insert code. Probably fixes bug #965.
1219 kes Back out one small change to the reservation system (reserving a volume).
1220 kes Rework how a Volume is mounted. It is now much more intelligent and
1221 will always attempt to use any mounted volume if possible and reduces
1222 calls to the Director asking about volumes.
1224 kes Turn off some code when batch insert not enabled.
1225 kes Edit FD name in connect error messages.
1226 kes Rework the reservation system to take into account that the Director
1227 might give us a Volume that is different from the current one being
1228 used, and to ensure that we don't exceed Maximum Volume Jobs.
1229 This fixes (mostly) bug #947 ' Maximum Volume Jobs = 1 produces
1230 fatal error with multiple jobs running'
1231 kes Add more debug code in reservation system.
1232 kes Implement maxvol-test to check bug #947.
1234 kes Add code to handle tray monitor separated from Win32 FD.
1235 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
1237 kes Add missed return in fixing verify bug -- trunk only.
1238 ebl Fix a command parser issue causing a director segfault.
1239 kes Fix ANSI tape labeling. Fix restoring ANSI labeled Volumes.
1240 This fixes bug #954.
1241 kes Increase the max block size to 4MB fixes bug #957.
1242 kes ERABT if user sets min block size > max block size. Fixes bug #956.
1243 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
1244 is not properly mounted (recognized) during a poll.
1245 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
1246 Job that has differences reports Verify OK.
1247 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
1249 ebl Add an option to operate on all pools with update vol parameters.
1250 This complete the project 20. Patch from Nigel Stepp.
1251 ebl Add history support to bconsole when using readline.
1252 Using Ctrl-D to exit doesn't update .bconsole_history
1253 kes Modify new volume algorithm to use max MediaId for generating next
1254 volume number rather than the count of Volumes. This should essentially
1255 eliminate the failure rate if some volumes were deleted. Bug #921.
1256 kes Begin implemention of Optimize Job Scheduling.
1257 kes Implement restore callback that Dirk and I agreed on for bat
1258 restore. This fixes bug #928. Restore of backup of zero files fails.
1259 kes Fix SQL Catalog logging which broke with new db_escape_string
1262 Release Version 2.2.4
1264 kes Fix bacula_cats.def for new db_escape_string().
1265 kes Increase size of name string when FD making connection to SD.
1266 May fix bug #953. FD->SD connection failure.
1268 kes Add code to help Dan debug 2drive-incremental-2disk test.
1269 kes Add code to try to fix bug #908.
1270 kes Add waits to multiple exit detection code to try to force pid
1271 file to always be deleted.
1272 kes Restore good dev.tar.gz to rescue set appropriate binary property.
1273 This fixes bug #950.
1274 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
1275 trying to switch drives by checking for blocking before unblocking.
1277 kes Cancel storage daemon in all cases where FD reports error. This
1278 should fix virtually all cases of bug #920.
1279 kes Fix db_escape_string() for MySQL which did not compile.
1281 kes Fix error message that was clobbered when Dir tells SD it does not
1282 have write permission on Volume. This should fix a minor point
1283 in bug #942, but not the main problem.
1284 kes Add code to cancel job in SD if FD connection fails. This should
1286 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
1287 dvl Pass jcr and db into db_escape_string() to enable better escaping
1289 kes Fix migration code to get correct Volume name with multiple volumes
1290 by skipping |. Fixes bug #936.
1291 kes Implement patch supplied by Landon to fix bug #944 where using
1292 TLS with bconsole uses 99+% of the CPU.
1293 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
1295 kes Move patches into patches directory.
1297 ebl Fix bug #946 about 'bacula-dir -t' which doesn't works
1300 ebl Using 'm' in bconsole will show messages like before,
1301 and not memory usage.
1302 kes Fix bug #935, and probably also bug #903 where files were not
1303 restored. MediaId was not properly set in JobMedia record after
1306 kes Suppress chown and chmod error messages if the FD is not running
1309 kes Apply Martin Simmons' patch that should turn off the new API usage
1310 when batch insert is turned off allowing building on older
1312 kes Add ./configure search in qwt-qt4 for qwt package
1314 kes Bacula is now free of 3rd party GPL copyrighted code!
1315 kes Remove idcache.c
1316 kes Add guid_to_name.c/h which replace idcache.
1317 kes Remove enh_fnmatch.c. Make code that references it use fnmatch.c
1319 ebl Detect if new PosgreSQL batch insert API is present.
1320 kes Correct incorrect mempool call causing Director crash. Occurs on
1321 systems without va_copy().
1322 sb Update spec files for 2.2.1 release
1324 kes Fix memory pool call in ua_output.c. bug #934.
1325 kes Replace fnmatch.c and fnmatch.h by modified BSD versions.
1326 Add test program to fnmatch.c
1328 kes Integrate patch to README.vc8 from
1329 Hederer Jean-Sébastien <hedererjs@asperience.fr, had to manually
1330 edit it to get it into Unix patch format.
1331 kes Implement mkpath.c to replace old FSF makepath.c
1333 kes Implement savecwd.h and savecwd.c. Remove FSF versions.
1335 Release Version 2.2.1
1337 kes Update POTFILES.in
1338 kes Cleanup a few underquoted AC_DEFUNs in configure
1339 kes Apply patch from Martin Simmons that adds a test for va_copy to
1342 kes Fix bug #921 by increasing the number of tries to create a new volume
1344 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
1345 can be called multiple times. Implement a version for machines
1346 without va_copy() that gets a big buffer.
1348 kes Integrate more portable zone offset code into bsmtp.c
1349 Submitted by Attila Fülöp.
1351 kes Fix bad SD->FD return status reported by
1352 (James Harper) <james.harper@bendigoit.com.au>
1353 ebl Fix a bug in read_close_session which return random status
1354 thanks to James Harper
1356 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
1357 and directory names during restore of single file/directories.
1358 kes Add sanity checks to .sql command when string is empty. Hopefully
1359 that will resolve Dirks Director crash.
1361 kes Apply patch submitted by Martin Simmons that corrects a seg fault
1362 in the bsmtp chat subroutine when debug is >= 10.
1364 kes Fix Director crash when running bat SQL queries.
1365 kes Add David's notes on Item 8: Copy pools.
1367 kes Rework projects file to be current and ready for a vote.
1368 kes Enhance lex scanner error message.
1370 kes Tweak LICENSE file to mention BSD code.
1371 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
1372 if specified on the ./configure.
1373 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
1374 This class is intended to allow us to open a second bsock to the
1375 Director while in the restore subdialog.
1377 kes Fix configure to create bat Makefile before creating dependencies.
1378 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
1379 kes Add a tooltip to the tray monitor.
1380 dvl Set the Director's PID file before dropping privs. This fixes
1383 kes Update AUTHORs file
1384 kes Increase the default max concurrent jobs to 20 in FD and SD to
1385 correspond with the default .conf files.
1386 kes Rewrite the Win32 service routines. This eliminates the 3 copies
1387 some different, of the same file created by RN when porting the
1389 kes Rearrange some of the Win32 directories and the placement of the files
1391 kes Set DEVELOPER flag in version.h
1393 ========================================================================
1394 Release Version 2.2.0
1396 kes Apply a second doc patch from Marc.
1397 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
1398 improves the tips section that discusses how to setup multiple
1401 kes Update bat README file.
1402 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
1403 corrects a typo in the Recycle status check in db_find_next_volume().
1404 This will probably fix a number of annoying problems with multiple
1406 kes Modify most of dird/msgchan.c to use bsock class calls rather than
1407 bnet calls -- no functionality change.
1409 kes Modify the Verify output to specify if files are missing on
1410 the Volume(s) or disk. Fixes confusion in bug #916.
1411 kes When more than one Volume is read in a migration job, the last
1412 Volume bytes reported are from the last read volume rather than
1413 the last written volume. Fixed. This fixes bug #910.
1414 kes Fix display of Recycle flag after update volume=foo recycle=yes.
1415 It previously printed New Recyle flag is: no. This fixes bug
1418 kes Correct seg fault when switching tape drives during restore.
1419 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
1420 be used until after 2.2.0 release.
1422 kes Remove fnmatch() in SD that permitted wild card specifications.
1423 This fixes bug #914.
1425 kes Fix %g in filename returned by SQL for browse tree reported by
1427 kes Fix configure so that it puts config.out in the cwd rather than
1429 kes Attempt to fix the locking problem reported by Eric in bug #906.
1430 kes Make berrno class to leave errno unchanged after constructor call.
1431 kes Make bnet_server use the heap rather than the stack to allocate
1432 its socket fd pointers to avoid a crash at termination. Problem
1433 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
1435 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
1436 and putting it in depkgs-qt along with Qt4.3.
1438 kes Rework code in acquire.c that switches drives for reading when
1439 the Media Type does not match. This should fix bug #906
1441 ebl Fix a director segfault during job setup #907
1442 kes Correct seg fault in postgresql when first operation returns no
1443 rows. Fixes Dirks File browser problem seg fault with bat.
1445 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
1446 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
1449 kes Implement PopUp YES/NO dialog for bat.
1451 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
1453 kes Correct RunScript to terminate job in FD on failure.
1454 kes Change abort_on_error and AbortJobOnError to fail_on_error
1455 and FailJobOnError in RunScripts.
1456 kes Minor tweaks of code formating in RunScripts, principally to
1457 avoid depassing 80 columns.
1459 kes Eliminate one #ifdef Win32 in bsmtp
1460 kes Implement grow tool to grow a file for testing very large databases.
1461 kes Add big-vol-test to test Bacula seeking with > 5GB.
1464 kes Modify find_next_volume() to return all values in Media record.
1465 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
1469 kes Update Release notes
1471 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
1472 Warning, in previous beta version, all media get from scratch keep their
1475 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
1476 This should fix bug #842. Made a note to look at removing the temp
1477 files at the end of the install.
1478 kes Add ability to mount and unmount a file device providing it is
1479 marked as being removable and has the appropriate mount and unmount
1480 commands defined in the Device resource. This fixes bug #830.
1481 kes When applying a storage override, release all previous storage
1482 definitions rather than just prepending the new storage.
1483 This should prevent a good deal of confusion.
1485 kes Implement ./configure search for qwt libraries.
1487 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
1488 Win32 FD. This should fix bug #893.
1489 kes Remove an unnecessary beep in Win32 init code.
1490 kes Update copyright dates in Win32 executable about boxes.
1491 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
1492 code with a BSD getopt.c and getopt.h.
1493 kes Remove sched.h from the Win32 compat directory -- not used.
1494 kes Remove the Exit menu item from the Win32 tray monitor. If you really
1495 need to shut it down, do it through the services panel or the command
1497 kes Remove some inappropriate Bacula FSFE copyrights.
1498 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
1499 kes Fix regress config non-portable test as pointed out by
1500 Florian Heigl <florian.heigl@gmail.com>
1501 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
1502 as pointed out by Florian Heigl <florian.heigl@gmail.com>
1504 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
1505 Reported by Frank Sweetser.
1509 kes Fix client-only build.
1510 kes Integrate client-only fixes for bsys (initgroups) and conio from
1511 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
1512 kes Make arguments to get_scratch_volume() in same order as other
1514 kes Rework the prune_volumes() subroutine so that after purging and
1515 no volume found in desired pool, it will check for a scratch
1516 volume. This prevents recycling the whole scratch pool.
1517 kes Add code to status storage to print boffset_t (largefile support).
1519 kes Move qwt (Graphics libarary for Qt4) to depkgs.
1520 kes You now need a --with-qwt=<dir> to be able to build bat.
1521 kes Update src/win32/cats/bacula_cats.def to include the new
1522 db_get_query_dbids() call on Win32.
1524 kes Correct a problem when selecting a scratch volume and moving
1525 it to another pool that lost some columns.
1526 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
1527 kes Enhance Autochanger error messages to include Volume and device name.
1528 kes Rework prune_volumes() code to take account of InChanger flag,
1529 and to handle recycling volumes going to the Scratch pool and
1530 current pool because the RecyclePool directive.
1531 kes Implement a better and more efficient db_get_query_dbids() to
1532 handle creating and passing back a list of DBIds.
1536 kes Start work on new more efficient DBId subroutine. First use
1537 will be for recycling volume to Scratch inchanger.
1538 kes Increase number of JobIds in pruning from 1000 to 10000.
1539 This to be replaced by above routine.
1540 kes Begin implementation of building Qt4 on Win32.
1541 kes Correct typo in fix I added for bad TLS shutdown.
1542 kes Pull 2.0.3 patches into patches directory.
1543 kes Update Release notes. Include qt-console in line count.
1544 kes Update Projects file.
1546 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
1547 bug in migration code where a job that spanned two volumes
1550 kes Implement new BST_DESPOOLING blocked state. Change from locking
1551 during despooling in SD to blocking. This means that other threads
1552 can work with the device structure, in particular the reservations
1553 system while despooling.
1555 kes Fix return in reservation message queue that missed clearing
1556 the jcr lock (implemented 26Jun07 below).
1557 kes Rename a number of dev methods to make locking function names
1559 kes Document locking in lock.c. Move lock structures to new file
1562 kes Move reservations message lock to lock jcr only this
1564 kes Move main SD locking code into lock.c (new file).
1565 kes Update Win32 build to include lock.c
1569 kes Dirk committed the qwt library code for drawing graphs in bat.
1570 kes Tweak install of qwt so that it is integrated with ./configure.
1572 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
1573 out by Eric (my typo).
1574 ebl Fix configure.in to get batch mode enable
1575 kes Return correct string from authenticate.cpp in bat when connecting
1577 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
1578 spurious line drops when using TLS.
1579 kes Do not file reparse points when restoring a file that already
1582 kes Implement Windows reparse points -- similar to directories, but
1583 we do not descend into it. This is a first cut. They seem to
1584 be backed up, but restore is not yet tested.
1585 kes Remove restore_blocking in tls code when shutting a socket to leave
1586 it in blocking mode. Hopefully this will fix the encryption bug
1587 reported by Frank Sweetser.
1588 kes When opening a file for backup, tell the OS that we are going to
1589 read it sequentially -- optimization.
1590 kes Change variable names in authenticate_director() to not conflict
1591 with member names in bat. Caused great confusion with compiler,
1594 kes Queue openssl error messages in case of comm problem.
1595 kes Do shutdown() call if socket terminated.
1596 kes Remove some duplicated code in tls.c
1597 kes Move more of the bsock member variables into private and access
1599 kes Add Frank Sweetser's tls-test to the regression suite.
1601 kes Add Swedish sv.po file
1603 kes Don't print clock skew message in FD if less than 3 seconds diff.
1604 kes Add a bit of VSS info to status client.
1605 kes Implement a first cut of Vista VSS, using Win2003 code.
1607 Release: 2.1.20 beta
1609 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
1610 loaded tape but uses first drive).
1611 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
1612 This was indeed a Win32 issue.
1614 kes Simplify search of autochanger for in-use Volume.
1615 kes Fix exit condition of check for in-use volume. kes Remove
1616 inappropriate my_postgresql_free_result() in db_close()
1618 kes Fix bad return in FD when encryption signature not found.
1619 Probably caused a crash.
1620 kes Inhibit missing encryption signature error messages for
1621 file types where no signature computed.
1622 kes Correct inverted check on autochanger in reservation system.
1623 kes Tweak debug code in autochanger reservation.
1625 kes Add some additional locking in the cats directory in subroutines
1626 that modify packet variables called from batch insert.
1627 kes Rework how dcrs are allocated. new_dcr() can now be called
1628 with an existing pointer, and it will simply clean it up.
1629 This allows the reservation system to test various different
1630 devices, and will permit easy device changes.
1631 kes A bunch of changes all over to handle new new_dcr() calling
1633 kes Work more on the Volume management in the SD. Remember Volumes
1634 for tape drives and for autochangers (even virtual disk changers).
1635 kes When looking at the Volume list to reserve a drive, handle
1636 autochanger names correctly by interating through the changer
1637 devices. Also call the Director to see if a Volume is suitable
1638 for the current job.
1639 kes Fix some bugs in bscan. Make sure all media records are written.
1640 Make sure that valid JobMedia records are written for disk files.
1641 Previously they were completely wrong.
1642 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
1643 that the URLs don't change and so that the developers will all
1644 work off the same copy. Rebuild from scrach.
1645 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
1647 Release: 2.1.18 beta
1649 kes Fix seg fault in FD from incorrect digest size.
1650 kes Fix argument to non-OpenSSL crypto.c subroutine.
1652 Release: 2.1.16 beta
1654 kes Remove a few malloc()s from the encryption code.
1655 kes Use the class calls to bsock in filed/backup.c and restore.c in
1656 place of the old bnet_xxx code.
1657 kes Implement code that does an on the fly calculation of the
1658 signing digest during restore of encrypted files. It makes
1659 a best guess at the algorithm, and if it is not correct, will
1660 then revert to the old code which reads the file after it is
1662 kes Implement at least one missing crypto stream in stream_to_ascii()
1663 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
1664 #877 where a reload with bad syntax causes Dir to exit.
1666 Cut: 2.1.14 beta (not released)
1668 kes Do not free a volume on a tape drive until another volume is
1669 mounted and read, or the autochanger unloads the volume.
1670 This should help the SD re-use volumes that are already mounted,
1671 and should fix bug #886.
1672 kes Apply patch from user brettedgar that allows gnome2-console include
1673 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
1674 kes Apply patch from Lucien Weller that fixes day of week calculation
1675 because of DST flag problem. Fixes bug #887.
1677 kes Move find_next_appendable_volume() to after acquiring a valid device
1678 in reserve.c. This fixes bug #864 -- confirmed by reporter.
1680 kes Unable to reproduce bug 872. However added additional testing for
1682 kes Bug #874 resolved by documenting SQLite limitations.
1683 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
1684 kes Bug #881 resolved by removing typo in mtx-changer script.
1685 kes Made Frank Sweetser's wiki the official Bacula wiki with his
1686 approval. Added a link to the wiki on the web page, and implemented
1687 a backup from http://paramount.ind.wpi.edu
1689 kes Fix update allfrompool to pass pool name.
1691 kes Convert to pure GPL v2 license.
1692 kes Fix sscanf problems reported by Peter Buschman that caused
1693 a bus error on Solaris.
1694 kes Rework (simplify) the select prompt in bat.
1695 kes Move get_jobid_from_tid() into lib and create a
1697 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
1698 should definitely fix the problem of lost error messages in the
1700 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
1701 kes Eliminate tcpd.h from the project. Enclose the #include from the
1702 library with extern C ...
1703 kes Add print of signal name when a signal is trapped.
1705 Release: 2.1.12 beta
1707 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
1709 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
1710 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
1711 makes SQLit3 run 30 times faster, though a bit less safe.
1712 kes Implement --with-batch-insert in configure and detection of thread
1713 safe libraries. It is on by default, but turned off if no thread
1714 safe library (e.g. SQLite 2) is available.
1716 kes Fix Bacula PostgreSQL buffer overruns.
1717 kes Do better checking for NULL results returned from PostgreSQL;
1718 implement retry for failed queries; clear results buffer after
1719 failed query. Hopefully this will correct the PostgreSQL failures.
1721 kes Implement algorithm to handle only one appendable volume with
1722 Prefer Mounted Volumes = no.
1723 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
1724 returned from a query.
1725 kes Make volume lock recursive.
1726 kes Implement an additional volume reservation algorithm that
1727 starts by considering all reserved volumes then uses the
1728 old brute force algorithm of searching the resources to
1729 find a suitable device.
1730 kes Add new reservations debug code and refine the old code.
1731 kes Update the win32/dll/bacula.defs file.
1733 kes Tweak reservations algorithm to permit a few more cases, i.e.
1734 volume reserved, but on different drive, ...
1735 kes Enhance SD status to include Pool and Media Type for drive in a
1736 more readable format (a bit longer).
1737 kes Fix PostgreSQL double free.
1739 kes Minor refactoring of restore decryption code.
1740 kes Add code to smartall.c to detect double free of a buffer.
1742 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
1743 so that bsmtp will create a correct email address (mailbox only).
1744 kes Modify 'memory' command so that the buffers are listed as 'In use'
1745 to avoid confusion with Orphaned buffers.
1746 kes I reworked the OpenSSL include/lib flags to be handled in
1747 the standard Bacula way, which should fix bug #863 concerning
1748 non-standard OpenSSL libraries.
1750 kes Implement Help Browser window for bat.
1751 kes Fix reload bug that reset StorageId to zero.
1753 kes Fix TLS #ifdefing when TLS turned off.
1754 kes Ensure that when labelling a tape with Slot=0 that InChanger
1756 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
1758 kes Add StartTime to final uar_sel_jobid_temp query so that we can
1759 add DISTINCT (required by PostgreSQL).
1760 kes Implement BSOCK authenticate_director() method. Eventually will
1761 authenicate all daemons.
1762 kes Move several more functions into the BSOCK class.
1764 kes Add code to tell the OS that we no longer need a cached
1765 file that we were reading. In findlib/bfile.c. Also,
1766 only cache files that we are reading. Thanks to
1767 Tobias Oetiker <tobi@oetiker.ch> for the idea.
1768 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
1769 kes Implement script to automatically generate cats and dll .def
1770 files for Win32 dll.
1771 kes Update README.mingw32 to include new .def file generation.
1772 kes Correct typo in UTF-8 error message as reported by:
1773 jhernandez <julianhernandez@gmail.com>
1774 kes Add additional sm_check() code on debug level 1.
1775 kes Set default debug level to 1.
1776 kes Trap SIGABRT in attempt to get traceback.
1778 kes Reduce bat connect timeout from 30 to 15 seconds.
1779 kes More restructuring and implementing BSOCK class in place of
1781 kes Remove a few unnecessary malloc() tests in crypto code.
1782 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
1783 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
1784 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
1786 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
1788 kes Fix Verify InitCatalog. The attributes were not pointing to the
1789 correct saved location.
1790 kes Implement message callback so that GUI is sure to get all
1791 daemon messages. Currently displayed in a dialog in bat.
1792 kes Ignore SIGUSR2 (Bacula timer) in bat.
1793 kes Apply regress patch from bug #859 to allow regress to work
1794 with Solaris compiler.
1796 kes Begin adding TLS support to bat.
1797 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
1798 clean up lex.c and make it more readable.
1800 kes Move more bnet functions into the BSOCK class.
1801 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
1802 kes Complete change of berrno strerror() method to bstrerror()
1804 Release: 2.1.10 beta
1806 kes Cleanup incorrect email addresses in bsmtp.
1807 kes Make bat display initial messages rather than discard them.
1809 kes First cut of adding .mod to the run command.
1810 kes Implement auto display of messages in bat.
1811 kes Enhanced preferences to allow all Bacula output to be
1814 kes Try to make bsmtp date routines more generic.
1815 kes Fixed bug #856 autochanger documentation.
1816 kes Rework bsmtp date editing for Win32. This fixes bug #854.
1817 kes Add new cats entry point so Win32 builds.
1819 kes Attempt to fix bsmtp date editing on OSes without %z editing.
1821 kes Do better checking for the MySQL 64 bit libraries looking for both
1822 .a and .so libraries.
1823 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
1824 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
1825 kes Require the thread safe version of MySQL during configure. Thanks
1826 to Andre Noll for pointing this out.
1827 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
1828 continuing in migration code.
1829 kes Apply implementation of tray-monitor font derived from gnome-console
1830 submitted by Andreas Piesk <a.piesk@gmx.net>
1832 kes Eliminate important memory loss in SQLite
1833 kes Fixed the batch insert MySQL thread specific data that was not
1834 being freed. See cats/mysql.c:db_thread_cleanup().
1835 kes Fix restore before command.
1836 kes Convert old hdr.name to name() in a few places.
1837 kes Implement update jobid command.
1838 kes Return all time_t dates in db_get_job_record()
1839 kes Stop watchdog in SD earlier.
1840 kes Put Pool just after Storage in please mount message.
1841 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
1844 kes Update the po files.
1845 kes Fix Verify InitCatalog by making it cache attributes.
1847 kes Change name bacula-bat to bat for man 1 page to correspond to
1849 kes Check for client and store NULL pointers in status command. This
1851 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
1852 kes Fix sign extended editing of %p.
1853 kes Clean out a little old #ifdefing in cats/mysql.c
1855 kes If time diff between DIR and FD is more than 600 seconds convert
1856 INFO message to WARNING.
1857 kes Implement heap size display in status for all daemons.
1858 kes Attempt to fix MySQL db open memory loss (not successfull).
1859 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
1860 kes Eliminate memory loss in MySQL (possibly other SQLs) during
1861 Query. This looks like a MySQL but but by doing extra releases,
1862 the memory goes away. This should fix bug #847.
1864 kes When backup fails, cancel SD before waiting for sd termination.
1865 kes If SD is waiting for FD to connect during cancel, wake up the
1867 kes Fix fsf code so that errno is correctly reported.
1868 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
1870 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
1871 so that Bacula doesn't later stumble into a seg fault.
1872 kes Use the term Restore Client in the restore Job report.
1873 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
1874 the original job's FileSetId.
1875 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
1876 spooling in migration jobs. Not yet tested.
1877 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
1878 reading conf file from a pipe. However, do it with open_bpipe()
1879 rather than popen. Not yet tested.
1881 kes Fix an ugly bug where the VolCatBytes were getting updated
1883 kes Implement bconsole memory command that prints current memory
1884 usage, plus smartalloc dump.
1885 kes Clarify some error messages in backup, admin, and migrate.
1886 kes Shrink label dialog to smaller size.
1887 kes Invert Cancel OK buttons on restore to be OK Cancel.
1888 kes More strerror() to bstrerror() conversions.
1890 kes Start implementing bstrerror() in place of strerror().
1891 kes Stripping path -- seems to work.
1893 kes Prevent door and port files from being restored (mostly
1895 kes Free an unreleased buffer in compat code.
1896 kes Change console Job name from *Console* to -Console- to eliminate
1897 Win32 filename problems. Put Win32 path separator when creating
1898 Console file. This fixes bug #846.
1899 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
1901 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
1903 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
1904 to force Win32 error message.
1906 kes First cut strip path. The data should be passed to the FD,
1907 but nothing is done with it yet.
1908 kes Enhance the digest and signature routines in the crypto
1909 library to accept a JCR and to use it to print error messages
1910 so that they will go in the Job report rather than the daemon's
1912 kes Simplify some of the verify signature code.
1913 kes Simplify a few of the alternative returns in the signature
1916 ebl Use only POSIX regex instead of GNU regex in breg.c for
1917 File relocation. It fix broken freebsd compilation.
1918 kes Convert all other Dir files to use new ua class message
1920 kes Tentative fix for missing digest signature in bug 807.
1921 kes Correct handle problem in new win32_ftruncate routine.
1922 kes Convert ua_purge.c and ua_update.c to use new ua class
1923 message routines for bat.
1925 kes Correct incorrect installation of LICENSE in Win32 installer.
1926 kes Display LICENSE at the beginning of the Win32 install.
1927 kes Attempt to correct the need for the png files to be installed
1929 kes Reapply my bat.conf install script in qt-console. I think I
1930 editted bat.pro instead of bat.pro.in and it was lost.
1931 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
1932 the /var/lock/subsys for subsysdir. Also corrects typos in the
1935 kes First cut update job.
1936 kes Correct configure to include qmake of src/qt-console directory.
1938 kes Make restore job yes/mod/no print in one command so GUI works.
1939 kes First cut implementing backup and restore client.
1940 kes Correct editing in Verify output that caused a seg fault.
1942 kes Insure that bat.conf is not overwritten during installation.
1943 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
1944 while I was implementing migration in March 2006 !
1946 ebl Cleanup file relocation, using char *RegexWhere instead of
1947 char *where + bool where_use_regexp
1948 kes Update some manpages and add bat manpage.
1949 kes Make a first cut at converting bacula.spec.in for bwx-console
1951 kes Apply patch from John Goerzen to add hostname as fourth argument
1952 to make_catalog_backup script.
1953 kes Fix typos I introduced into bsmtp.c
1954 kes Make pm_strxxx() routines handle input of NULL pointer. This
1955 is to protect from NULL pointers returned from SQL databases.
1956 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
1957 kes Add more debug to FIFO code -- fix fifo regression test.
1959 kes Implement posix_fadvise in FD, and for reading spool files in SD.
1960 kes Add thread timer to bnet_connect() to break from OS if wait time
1963 kes Update Win32 build to include new files, new symbols, and
1965 kes Implement socket level heartbeat (tcp_keepidle)
1966 ebl Commit File relocation patch
1967 kes Make bat have 'make install' target.
1968 kes Warn during install if old gnome-console binary found.
1969 kes Warn during install if old wx-console binary found.
1970 kes Add -8 option to bsmtp command line to add content type utf-8.
1971 Fixes bug #809. (Character coding problem in bsmtp).
1972 kes If < is found in target (from, to, cc) then do not enclose the
1973 target in < > in bsmtp. Fixes bug #772 (malformed address).
1974 kes When printing certain items in dbcheck, stop after 300000.
1975 Fixes bug #822. (dbcheck loops).
1976 kes Incorrect status in Dir after waiting for mount with poll set.
1979 kes Extend idea of Prefer Mounted Volumes to mean a volume about
1981 kes Print waiting to reserve a device every 5 mins.
1983 kes Don't call close_part in label.c if tape and relabel.
1984 kes Don't free volume if busy in close() -- should help with
1986 ebl Fix #824 RunScript bug (After script could be execute twice)
1987 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
1988 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
1989 Add a regression script to test RunScript
1991 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
1994 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
1995 deprecated. No additional bugs will be fixed, and they will be dropped
1996 in a future release (probably 2.4.0).
1997 kes Change name of wx-console to bwx-console to make it more Bacula
1999 kes Change the name of gnome-console to bgnome-console to make it
2002 kes Some time in March, a Feature Request with patch from Jorj Bauer
2003 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
2005 The ability for the director to validate a Client (FD) CN against
2006 an arbitrary set of patterns rather than the hostname, with
2007 A new 'TLS Allowed CN' set of directives which are implemented
2008 in the Client resource. Then pattern matching is used in place
2009 of hostname matching against the Certificate's CN. As an example, we
2010 have certificates which (a) use a local CA, and (b) have a CN of the
2012 kes Add new/changed entry points to Win32 build
2013 kes Create unaccepted-projects for projects that are not accepted.
2014 kes Simplify locking in the reservations system.
2015 kes Add more debug code in reservations.
2016 kes Make sure error condition on reserving a volume is handled correctly.
2017 kes Correct handling of volume_in_use.
2018 kes Correct handling of initializing a device.
2019 kes Move handling of broadcasting releasing a device into release_device().
2020 kes Correct attaching dcr to dev so that it is only done if device
2021 is properly initiated.
2023 kes Locking debug level tweaks in SD.
2024 kes Tweak new Volume code.
2026 kes Add exec external-command [wait-seconds] to bconsole. This
2027 executes the external-command. Note! normally external-command
2028 should be enclosed in double quotes.
2029 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
2030 it should normally be off in a production system.
2032 kes Implement die command for SD so that we can force it to dump.
2033 kes Implement SD lock debug code.
2034 kes Implement new algorithm for keeping Volume list in SD. It
2035 is now owned by the device.
2037 kes Implement new code for freeing in use volumes that should
2038 resolve if not all, some of the problems of multiple drive
2039 tape conflicts described in bug 801.
2041 kes Fix gui/bacula-web/images files in svn.
2042 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
2044 ebl Fix a bug in batch mode (in string escape)
2045 kes Correct migration prune SQL typo that crept in in a
2046 recent 2.1.x change.
2048 kes Move bnet_despool() into class in bsock.c
2049 kes Modify job report to include director name and Build OS.
2050 kes Move drop root privilege and check_catalog() before fork.
2051 kes Add update database scripts (version 9 to 10) to updatedb directory.
2053 ebl Check size and age of each file after its backup to see if
2054 it has changed during backup, if 'checkfilechanges' is set.
2055 The FD will do an extra check (stat(2)) after
2056 each file backup. mtime, ctime and size are compared with
2057 'before backup' information. If time or size mismatch, an
2058 error message will be generated. You must upgrade FD to use it.
2060 kes Make database name and user configurable
2061 --with-db-name=xxx --with-db-user=xxx
2062 kes Add back database type to message.c for debugging.
2064 kes Implement dir_sql() which issues an SQL query.
2065 kes Modify bat medialist to use dir_sql() and do some minor C++
2066 formatting as well as eliminating a number of pointers, simplifing
2069 kes Fix some of the mtx-changer grep commands for tape label readers.
2070 kes Convert a number of bsendmsg into the appropriate send/warning/error
2071 message class calls.
2072 kes Suppress the using database message in the .sql command.
2073 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
2075 kes Add context menu for floating a window.
2076 kes Some minor cleanup and name changes in qt-console
2077 kes Add doing mt setblk 0 in Win32 mtx-changer.
2078 kes Apply Martin's bug fix to move definition of ENODATA for
2080 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
2081 sqlite2 and sqlite3.
2083 kes More pruning cleanup.
2084 kes Turn on wait_for_drive by default in mtx-changer.
2085 kes Turn on Batch insert code by default as it now passes regression.
2086 kes Add ./configure --enable-bat to enable building of Bat.
2087 No install yet though.
2089 kes Implement a new .sql command for bat.
2090 kes Implement code to turn off pruning in obtaining the next volume.
2091 Pruning is turned off for the status dir command, but turned on
2092 for SD requests and for the list nextvolume command.
2094 kes Correct Qmsg() that was not updated correctly when committing a
2095 previous change (probably the recent TLS patch).
2097 kes Write new subroutine is_volume_purged() that explicitly checks
2098 if the Volume is purged, and if so marks it as such. This should
2099 resolve problems reported about needing to mount twice to recycle
2101 kes Rewrite pruning algorithm to do more work in the SQL engine, and
2102 to pass a list of JobIds to be deleted to SQL. Also, minimize the
2103 amount of duplicated code.
2104 kes Do volume pruning only for the Media Type desired (reduces pruning time
2105 if multiple Media Types are in the same pool).
2106 kes Implement more detailed info in the Job report for the Bacula version
2108 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
2110 ebl Add bbatch tool to bench database and insert mode.
2111 Fix sql quote stuff in batch mode
2112 Fix sql stuff for mysql
2114 kes Correct problems with am/pm scheduling. Fixes bug #808.
2115 kes Implement new prunning code that prunes up to 1000 jobs at
2116 the same time. The same technique can be applied to a number
2117 of other prune/purge subroutines.
2118 kes Add an insanity check when starting a new tape job to ensure
2119 that the tape position has not been changed. If so fail the
2121 kes Fix Win32 build for dlls to add the folllowing:
2122 src/lib/bsock.c -- new file with new entry points
2123 src/lib/dlist.c -- new entry points
2124 src/cats/sql_create.c -- new entry point
2125 src/cats/sql_cmds.c -- new DATA item exported
2127 ebl batch mode cleanup bscan-test is ok now.
2128 kes Implement SD code to check length of disk volume before appending.
2130 kes Correct return status on db_batch... routines.
2131 kes Add call to db_write_batch_file_records() to migration code.
2132 ebl Fix AfterJob timing
2133 kes Move the checking of the database in initializion of the Director
2134 to after we drop privileges. This avoids the need for both root
2135 and bacula access to the DB.
2136 kes Correct a misplaced variable definition in src/filed/backup.c
2137 kes Correct how the new batch insert db_create_attributes_record()
2138 uses the arguments. Caused a seg fault in bscan.
2139 kes Implement lock() and unlock() methods in DEVICE class.
2140 Implement block() and set_block(xx) methods in DEVICE class.
2141 kes Modify bnet_connect() so that it uses time() to check for the
2142 wait time expiring (on some OSes, some system calls may not
2143 return immediately).
2144 kes Modify Verify to obtain the previous JobId when it is actually
2145 running rather than at schedule time (as it was in 1.38.x).
2146 kes Fix src/job.c to handle MaxWaitTime correctly. This should
2148 kes When checking pid in pid file, continue running if the pid is
2149 the same as ours. This occurs on IRIX after a system crash.
2152 kes Extend new GUI API.
2153 kes Make the ua structure a class, and implement send_msg(),
2154 error_msg(), warning_msg(), and info_msg().
2156 kes Apply fix from for building wx-console on the Mac from
2158 kes Implement new select mechanism for GUI programs.
2159 kes Reorganize initialization of stackedWidgets in bat.
2161 kes Add updated nagios plugin supplied by Christian Masopust.
2163 kes More bat implementation.
2164 kes File migrate bug with Pool Occupancy using mediaid instead
2165 of jobids. Fixes bug #795.
2166 kes Fix orphaned buffers in filed backup and verify due to
2167 crypto buffers not freed during errors. Fixes bug #789.
2168 kes Extend new GUI api code to tree commands.
2169 kes Ensure that tree and dot commands check console ACLs.
2170 kes Permit marking directory with trailing slash.
2171 kes Allow 20 console connections (instead of only 10).
2173 kes Add smartctl call to bacula-sd.conf as an example of getting
2176 kes Modify jobq.c to let simultaneous restore jobs run. This may
2177 cause them to fail if they cannot get a drive.
2178 kes Add Client Connect Wait to Storage daemon to permit users to
2179 modify the time the SD waits for a FD connection.
2181 kes Correct virtual changer check which was backwards. This caused
2182 volumes to be unloaded into slots already occupied.
2184 kes Apply Command ACL filter to JobId list in restore command.
2185 kes Correct typeo in var.c patch.
2187 kes Don't let Bacula prune File or Job records for the current Job.
2188 kes Fix variable substitution pad + inc bug reported (with patch)
2191 kes Correct SQLite log table index as reported by Luca Berra.
2193 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
2195 kes Begin implementing new comm signals for API.
2196 kes Fix a few places in lib/message.c where the open fd may
2198 kes Continue implementing lib/bsock.c (real class). Make jcr,
2199 who, host, and port private. There are new methods to access
2200 them for non-class use. This required touching a number of files.
2202 kes Add LANG=C to autoconf/randpass so it works with languages other
2203 than English. Fixes bug #788.
2205 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
2207 You will not be able to generate Include/Exclude list any more.
2208 It will be fixed soon.
2209 If you want to use this, you can apply
2210 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
2212 kes Restore of sockets created false error messages because Bacula
2213 no longer restores sockets, but the code was still trying to
2214 set the attributes on a non-existent file. Reported by a user.
2215 ebl finish RecyclePool feature
2216 Media will takes Pool.RecyclePool
2217 when moving from Scratch to a Pool or when user will do
2218 update volume=xxx frompool
2219 To use it, add RecyclePool = aPool to your Pool resource
2222 RecyclePool = Scratch
2226 kes Expand new BSOCK class adding signal() and new BNET signals.
2227 kes Begin enhancing the dot commands adding a new API function
2228 that returns more information and will make it easier
2229 to interface to the Director from a program.
2231 kes Make DEVICE fd private. Its new name is m_fd, and can be
2232 obtained with dev->fd() outside the class. This is the
2233 first of many DEVICE members to be made private.
2234 kes Implement Michael Renner's idea on having a virtual disk
2235 changer. I made some minor modifications (e.g. I did not
2236 implement the Virtual Changer directive, but simply set
2237 the Changer Command to an empty string.
2239 kes Implement a BSOCK send() method that writes the whole record
2240 in a single write() request rather than in two.
2241 ebl add update volume=xxx recyclepool=yyyy
2242 volume takes recyclepool from pool when using update volume=xxx from pool
2244 kes Fix encryption deblocking bug, which caused some restored files
2245 to be truncated. This fixes bug #763.
2246 kes Add FD event sequence order prepared by Eric -- for RunScripts.
2247 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
2249 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
2250 ebl Use btime_t instead of uint64_t in media patch.
2252 kes Optimize the use of the database a bit in the Status dir command.
2253 Only open it when needed, ensure that if any previous database
2254 was opened, it is closed.
2256 kes Correct VolCatBytes bug from media patch.
2257 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
2258 in the case of orphaned records.
2259 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
2260 and File records in 300K chunks to be more efficient. This
2261 idea came from Juan Luis Frances (if I remember right).
2262 kes Apply Eric's scratch patch that moves a purged Volume to
2263 the RecyclePool. Question: how is RecyclePool set? what
2264 happens to the ScratchPool?
2265 kes Apply Eric's media patch that collects read/write media
2266 times as well as byte counts. This patch requires a
2267 simultaneous upgrade of the DIR and SD. Note, there
2268 should be some way to turn off timing. I'm not sure
2269 times are in Bacula units.
2270 kes Apply Eric's batch-insert patch.
2272 kes Update projects list.
2274 kes Implement Include/Exclude file lists in FD as dlists using
2275 the new dlistString class. This permits efficiently having
2276 large include/exclude lists and completes project Item 25.
2277 kes Fix dird/ua_cmds.c so that a cancel command checks if the
2278 console is authorized to cancel the job. This fixes bug
2280 kes Modify SD so that the VolCatJobs medium record is updated
2281 at the beginning of a Job rather than the end. This
2282 fixes bug #775 where exceeding MaxVolJobs caused jobs
2284 kes Added a mutex around getting and setting Volume information
2285 so that multiple simultaneous jobs will single thread.
2287 Switch to using Subversion
2288 kes Remove src/pygtk-console/ from configure
2290 kes Delete src/lib/btree.c from win32 build, then add rblist.c
2291 plus the entrypoints.
2292 kes Apply patch supplied that corrects debug print
2293 in canceling jobs for max run time. Supplied as
2294 part of bug #621, which was previously fixed.
2296 kes Test on job_canceled() and sd_msg_thread_done inside
2297 loop starting the message thread to avoid a race condition.
2299 kes Remove rl_catch_signal from console.c as it conflicted
2300 with the header definition. Fixes bug #765.
2301 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
2303 kes Clarify some stored/acquire messages to indicate if the
2304 problem is with read or append.
2306 kes Fix memory leak with storage ids in cats/sql_get.c
2307 kes Terminate watchdog earlier to avoid reference to released
2308 memory -- reported by Jason Austin.
2309 kes Move closing the database from jobq.c to the director daemon
2310 termination routine. This fixes memory leaks for shadow jobs
2311 (i.e. migration jobs).
2312 kes Free up the unique jobid chain items in migrate.c. This fixes
2313 a memory leak problem.
2314 kes Convert some ugly looking for statements to use foreach_alist
2315 in findlib/find.c. This will facilitate converting the structures
2316 to use dlist (for large include/exclude lists).
2317 kes Fix a bug in the btree.c and btree.h routines, then rename them
2318 rblist and add them to be built in src/lib. Include some new
2319 methods written by Rudolf Cejka that make the code more readable
2320 (hides some of the ugly casting).
2321 kes Add set_next() and set_prev() methods which make the code much more
2322 readable. Also add a new dlistString class that facilitates storing
2323 strings in dlists. To be used in the large include/exclude lists.
2324 kes Make some trivial modifications to lib/tree.h that use rblist
2325 rather than dlist for storing the tree links. This was suggested
2326 by Rudolf Cejka. The result of this is that the restore tree now
2327 uses red-black binary trees rather than simple linked lists. This
2328 should give rather dramatic speed improvements for directories
2329 contining large numbers of directories/files (more than 10000).
2331 kes Fix maxruntime bug #621.
2333 ebl Implement the include JobID in spool file name project.
2334 kes Reorder projects file in order determined by Jan 2007 vote.
2335 kes Implement item #12 on project list -- quick release of FD by
2337 kes Fix open of SQLite3 db where user does not have write permission
2338 so that DIR does not crash. Fixes bug #761.
2340 kes Add back missing @ in Win32 Makefile.
2341 kes Change 'Device not configured to autolabel' from INFO
2343 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
2344 which should restart an indefinite # of times.
2345 kes Fix configure --help to print --with-mysql[=DIR]. Same for
2346 other DIR specifications.
2348 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
2349 Fix path quoting in SQLite scripts.
2350 Fix problems with SHGetFolderPath.
2352 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
2354 kes Fix Job restart on error bug that promotes an Inc to a Full
2355 backup. This should fix bug #755.
2356 kes Add qt-console and first cut of code.
2360 kes Fix Bacula->Documentation link on Win32 to point to index.html
2361 instead of bacula.html. Fixed bug #750.
2362 kes Return JobId in db_get_job_record() when JobId==0. This should
2364 kes Do not release source pointers when restarting a failed job.
2366 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
2367 This *should* fix bug #747.
2368 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
2371 kes Modify USTORE constructor to set an empty store_source string,
2372 and don't copy the store_source string in a cancel. Hopefully
2373 this will fix Arno's seg fault, bug #744.
2374 kes Add back code to disable conio in configure. Fixes bug #743.
2375 kes Correct the Options scanner in the FD to correctly handle
2376 SHA1 option, which was eating the next option. Reported by
2378 kes Add code to indicate when the SD is spooling, spool wait, and
2379 despooling as requested by Alan Brown.
2381 Version 2.0.0 released: 4 January 2007