1 Technical notes on version 2.5
6 command separator in console (!$%&'()*+,-/:;<>?[]^`{|}~)
7 examples/database/dbcheck.sql
10 dbdriver in bacula-dir.conf
12 enhancement to wait command: wait mount ...
17 remove reader/writer in FOPTS????
21 ebl Add a new VerId variable that is printed in version command.
22 kes Fix migration SQL not to migrate a job that has not terminated.
23 This is a partial fix to bug #1164.
24 kes Sort JobIds returned from db_accurate_get_jobids() to fix Virtual
25 backup start time bug reported by Graham Keeling.
27 ebl Fix possible bug in cancel_job() with job that are not
30 kes Fix bat build for Win32.
32 kes Copy plugin link field into ffpkt.
34 kes Integrate patch from Kjetil Torgrim Homme <kjetilho@linpro.no>
35 It provides FileRegex in bsr files and code to collect regex
36 from the user during restore, an Allow Mixed Priorities feature,
37 and documentation for the above.
38 ebl Remove db berkeley from configure process
39 kes Do dirty check on hostname (Linux only) and if not resolvable
40 use localhost as default.
41 kes Increase vtape max block to 20GB.
43 kes Refactor restore code to create a close_previous_stream(). This
44 This may destabilize the source.
45 kes Implement planned startRestoreFile() plugin call.
46 ebl Remove missing Loaded information from status slots storage command.
47 ebl Fix Console command problem that cancels the job
48 kes Add more plugin restore debug code.
50 kes Fix plugin_bwrite - plugin-blseek mixup pointed out by James.
51 kes Rewrite plugin restore interface a bit to correspond to how Bacula
52 creates and writes to the restored file.
53 kes Add some DebugMessage() calls to the bpipe-fd.c program.
55 kes Apply Marco van Wieringen's set of patches, cleans up Migration/Copy
56 Implement 'Pool Uncopied Jobs', allow Solaris Compiler to build
57 Bat; allow add and delete in place of mark and unmark.
58 kes Another attempt to fix the endRestoreFile plugin bug noted below.
60 kes Apply dbi driver patch from Joao.
61 kes Correct a bug in passing the context to the endRestoreFile() plugin command.
62 Bastien Friedrich reported the bug.
63 kes Create plugin instance only when FD job starts.
64 kes Add new FD plugin event: bEventCancelCommand when
65 a cancel command is issued to the FD.
67 kes Add cmd_plugin flag to jcr so we can globally know if a
68 command plugin is running.
69 kes If command plugin running, do not attempt (for the moment)
70 to get Win32 extended attributes.
71 kes Ensure that proper Win32 flags are set in bfile packet
72 if plugin_bopen() works on Win32.
73 kes Remove generated src/plugins/fd/Makefile
75 kes Implement build and install of bpipe-fd.so plugin.
76 kes Rework the interface that passes packets to the plugin
77 so that the packet is started and ended by the packet size.
78 This allows the driver to do a sanity check.
80 kes Rework the pluginIO Bacula internal code to enable
81 proper handling of Win32 error codes from GetLastError.
82 kes Apply Joao's patch to regress startover_libdbi.
84 ebl Add -B option to dbcheck to get catalog information
85 kes Fix Win32 build to include new library function.
86 kes Remove some old reader/writer code.
87 kes Implement ./configure --with-plugindir=xxx
88 ebl Fix the mysql bug in the new accurate code
89 kes Improve plugin debug. Create plugin test.
90 kes Set main thread specific data to INVALID because it
91 has no jcr. This allows debug output to work correctly.
92 kes Add src/plugins/fd/Makefile to ./configure process.
93 kes Make first cut attempt to correct SQL that computes the current
94 Pool usage. This is to fix bug #1159.
95 kes Do a bunch of plugin cleanups for Win32 and more careful checking
96 of PluginDirectory and whether or not a plugin was found.
98 kes This code should fix the race condition that leads to a Director
99 crash at job end time when the job list is updated. This was reported
101 kes Add more plugin documentation and fix include of config.h for
102 Win32 build (I hope).
104 ebl Revert to htable instead of rblist
105 ebl Cleanup accurate code (remove tcdbm parts) and use red/black
106 tree instead of htable.
107 ebl Use a dedicate DB link to compute and send the accurate list
110 kes Fix compile errors in filed/fd_plugin.c.
112 kes Remove all double quotes from SQLite creating script and
113 replace by single quotes as suggested by John Huttley.
115 kes Apply dbcheck patch from Yuri Timofeev <tim4dev@gmail.com>.
116 It significantly improves the performance of dbcheck for
118 kes Fix bad debug code call in src/filed/accurate.c
120 kes Change two Jmsgs in accurate to Dmsg to reduce unnecessary
121 output. Perhaps we really need to implement M_SAVED.
123 kes Fix bug #1156 FD crash during processing of Accurate data.
124 kes Tweaks to htable code to improved debugging and make names
125 a bit more meaningful.
127 ebl Remove time_t from update_stats()
129 kes Modify the license of the example plugin program to allow
130 it to be used by anyone for making a Bacula plugin.
131 kes Make apply_rp_codes() in bpipe-fd.c be static.
133 kes Remove Encryption and Accurate lines in vbackup output -- not used.
134 kes Fix subtle bug in vbackup by not changing DEV_RECORD packet.
135 kes Add host name to items printed during dump.
136 kes Make Check File Changes default on.
138 kes Set the default FD timeout to 3 minutes (previously 30).
139 kes Apply Bastian Friedrich's weird spelling correction patch.
141 kes Always print Verify hash differences. Rename variable to make the
142 code slightly more readable.
144 kes Correct tests for MaxFullInterval as reported by
145 Ulrich Leodolter <ulrich.leodolter@obvsg.at>..
146 kes Fix MaxDiffInterval code as well.
147 kes Enable Win32 plugin load code in lib.
148 kes Make Verify code that computes disk checksums use the same
149 algorithm as backup when dealing with sparse files.
150 kes Attempt to run VSS on any systems newer than Vista -- should
151 make it work on Windows Server 2008.
152 ebl Change the new statistic implementation. Remove the UseStatistic
153 directive and add a 'update stats [days=...]' command. You can
154 now decide when copy job records from Job table to JobStat.
155 Statistics are much more accurate with this.
157 kes Fix SQL case problem that may cause the failure of DiskToCatalog
159 kes First cut adding SD plugins.
161 kes Add Slot if it is non-zero to writing bsr file after a
163 kes Change a number of bnet_fsend() into class method calls.
164 kes Begin audit of diff of 2.4 branch to trunk code.
166 ebl Fix the mysql creation script that double-created an
167 index of the same field on the Media table.
168 Add an index to on VolumeName to the Media table for mysql.
170 kes Another try at fixing Vbackup. It looks much better this time.
171 Disable file index sanity check in FD with value stored in
172 attributes record because with Vbackup the File Index gets
173 changed, but not the attributes record.
174 Enhance some debug code.
175 Fix handling of re-indexing records that are copied in Vbackup.
177 kes Made level_to_str() know about Virtual backup.
178 kes Set correct Virtual backup write pool.
179 kes Fix compile warning in new dbcheck port code.
180 kes Fix migration code broken by previous virtual backup fix.
182 kes Fix problem of Virtual backup not writing a sequential FileIndex.
183 kes Reset Virtual backup time/date to the value from the last backup.
184 kes Ensure that storage name is passed to SD on read.
185 kes Correct a problem with Level and Virtual backup, rework how
186 bsrs are printed in debug to use standard routine.
187 kes Apply patch from Chris in bug #1133 that provides alternate db port
189 ebl Remove catalog dependency from bcopy tool.
190 ebl Modify catalog scripts to have an easier packaging integration,
191 using default variables.
192 Make difference between SQLite3 and SQLite in db_get_type()
194 kes Apply most of changes in a patch from:
195 Michael Stapelberg <michael+bacula@stapelberg.de>
196 that allow the Bacula FD to compile on IRIX 6.5.
198 kes Apply patch from Bastian Friedrich that accepts a yes on a
199 delete volume command line.
200 kes Attempt to fix bug #1128 InChanger flag cleared during Migration
201 job when reading from one autochanger and writing to another.
202 kes Minor tweaks (copyright dates convert to use method instead of bnet).
204 kes Fix NULL Volume error when reading (or Migration or VBackup) must switch
205 drives when no tape is mounted.
207 kes Add additional info to some SD messages.
208 kes Add fix supplied by Martin Simmons for turning off EOL character
209 in new console multi-command code.
211 kes Fix a Verify InitCatalog problem where in certain cases
212 a garbage filename may be entered in the verification database. This
215 kes Add VSS 64 bit dll entry point in src/win32/filed/vss_generic.cpp
216 sent in by Riyas Yoosuf.
218 kes Fix seg fault in Dir during estimate command with no level value
219 given. This fixes bug #1140.
221 kes Add message to migration job when the target job is already migrated.
222 This closes bug #1129.
225 kes Raise some restore debug levels.
226 kes Replace off_t by boffset_t where ever I found it.
228 kes Define a machine dependent ioctl request type for use with
231 kes When a migration job actually runs, re-check the Job record
232 and skip if the job is already migrated. This should
233 significantly reduce the problems with bug #1129.
235 kes Set MALLOC_CHECK_=0 in environment before starting Bacula to
236 turn off glibc checks that prevent getting good dumps.
237 kes Implement console 'wait mount' command. Doesn't yet work.
238 kes Implement timeout=nn on console 'wait mount timeout=nn' command.
239 kes Break the do_swapping into do_unload, do_swapping, and
240 do_load. It is much more logical that way.
241 kes Implement a set_dcr_from_vol subroutine in acquire.c for
242 reading volumes. This allows the dcr to be refreshed after being
243 zapped when the wrong volume is mounted.
244 This should fix bug #1126 -- During multiple tape restore, bacula
245 does not ask for physical tape change, but rereads same tape
247 kes Apply patch submitted for bug #1107 with a small modification.
248 This fixes a bug where bcopy copied too many records.
249 kes Make some tweaks to bsmtp based on patch submitted in bug #1124.
250 This fixes bug #1124.
251 kes Make the default bat restore Pool be Any. This fixes bug #1118.
253 kes Remove debug statement that crashes the SD at the end of
254 a tape during restore. Fixes bug #1125.
256 kes Implement Win32 bat changes made to Branch-2.4
258 kes Tweak separator command in console to start disabled and
259 allow defining no separator character. Also make code a
260 bit more fault tolerant.
261 kes Make btraceback write the traceback to the working directory
262 before attempting to mail it.
263 kes Add a RFC to Projects.
265 kes Attempt to implement a kludge to make Qt work with bat
267 kes Setup rstorage correctly. Virtual backups are working.
269 kes Move setting JobLevel and JobType into a method, which should
270 allow completing Virtual Backups.
271 kes Fix verify jobs to work again.
273 kes Virtual Backup tweaks -- it is close to working.
275 kes Ensure that SD tried to mount a volume not in an autochanger
276 at least once before asking for operator intervention.
277 kes Make SD aware of Virtual Backup jobs.
278 kes Add VirtualFull for bat.
279 kes Changes to get read storage correct for Virtual Backup.
281 kes Remove old code from label.c
282 kes Split display_display_info() out of write_bsr_file()
283 kes do_vbackup_init() working -- i.e. bootstrap file built.
284 kes Change Bacula trademark owner from John Walker to Kern Sibbald
285 kes First non-working cut of vbackup
286 kes Correct FD heartbeat code to use volatile variable accessed by
288 kes Zero thread id with memset if on Win32 in case it is a struct.
289 kes If cannot create JobMedia record, continue to try to write eof
290 and clean up in block.c
292 kes Add code to interface OpenSSL to new Win32 pthreads code which
293 used a structure for thread_t.
295 ebl tweak bat for win32 compilation
297 ebl Remove tokyo cabinet from the source
298 ebl Update configure/autoconf to support berkeley DB
299 ebl Add a sort to db_get_file_list() to improve bsr construction time.
301 kes Add a mtx-changer.conf file that is not overwritten during
302 an upgrade. It fully configures the mtx-changer script.
303 kes Clear in-use bit on vol when unused while swapping.
305 kes Remove sleep at end of ./bacula
306 kes Clear hash packet for hardlinked files correctly. This corrects
307 a long standing bug where hardlinked files selected individually
308 would occasionally not be restored.
310 kes Apply Eric's patch to ensure that autoprune does not return
311 a Volume not in the autochanger unless requested to do so.
312 kes Correct bat restore display of multiple drives. This fixes
314 kes Do find_a_volume() each time an unload is done. This
315 fixes the failure of maxvol2-test.
317 kes Add some SD debug code.
318 kes Do find_a_volume() each time an unload is done.
319 kes Apply Joao's DBI patch that adds easier configuration of DBI drivers,
320 and adds --with-db-port to ./configure.
321 kes Use Qmsg() in job.c watchdog callback.
323 kes Release main control rwlock if ABORTing.
324 kes Make watchdog connect timeout queue messages rather than sending
325 directly to avoid lock conflicts with the real thread.
326 kes Add const char in dbd.c to avoid compiler warnings.
327 kes Fix python compiler string warning. Note, IMO the GNU C++
328 compiler guys have made a *very* bad change to their compiler.
329 They now force all strings to be 'const' unless you explicitly
330 cast them, which is extremely ugly and ruins nice code as well
331 as creates a lot of useless work.
333 kes Fix mtx-changer to detect both versions of Ubuntu (Debian)
334 mt. This fixes bug #1116.
335 kes Add const in python files to reduce compiler warnings.
336 This may have to be backed out because of later compiler
338 kes Fix failure of 2drive-concurrent-test. Always read label;
339 clear_unload() only after drive is defined in acquire_for_read().
341 kes Generally clean up the manual tape loading code. The main
342 conceptual change is that when a volume is marked to be unloaded,
343 its volume name is retained, and it is only marked as unloaded
344 when either the autoloader says it is unloaded or another tape
345 is read on that drive.
347 kes Add debug code and refactor subroutine in stored/mount.c
348 kes Fix format problem in bscan output reported in bug #1105.
349 ebl Fix get_next_volume_for_append logic with autochanger
350 - use pruned volumes if found
351 - don't reset the inchanger flag after getting a recycled volume
353 Fix recycle_oldest_purged_volume to take InChanger flag in account
355 ebl Add mmap/unmmap implementation for tokyodbm under win32
357 kes Make first step toward eliminating globals from config
358 scanning. Also should be a workaround for FORTIFY_SOURCE
359 GNU C bug -- fixes bug #1042.
361 kes Apply duplicate job tests to restarted jobs.
362 kes Copy more data when restarting a job so that run
363 overrides are kept. This should fix bug #1094.
365 kes More word alignment cleanup.
366 kes Fix bug where SD did not ask operator if the device could not
367 be opened. Reported by Eric.
369 kes Add dbuser to DIR conf file (replaces user).
370 kes Add --with-db-password to ./configure
371 kes Fix regress to handle db_password.
372 ebl Add new 'status storage slots' that list autochanger
374 ebl Update vtape driver to compile only under Linux.
375 ebl Fix a bug when restoring with a wrong mediatype.
377 kes Eliminate ints from conf files and structures to avoid
378 word alignment problems
380 kes Fix bug reported by Scott Barninger where the bacula script
381 refers to scripts in the wrong directory. Needed to meet the
382 requirements of recent FHS location changes.
383 ebl Disable vtape for FreeBSD.
385 ebl Modify disk-changer to check if slot contains something before
388 ebl Fix vtape on win32 and debian.
389 ebl Fix autoselect patch (cause segfault).
391 ebl Fix autoselect option broken for a while. Fix #1089. Need some
392 work with StorageId to be able to use a particular drive in a
395 ebl Rename vtape to vtape.
396 ebl Update vtape driver.
398 ebl Modify vtape driver to avoid sparse file.
399 kes Add make clean of qt-source directory during ./configure
400 kes Store last block number written to tape in DEVICE and
401 use it for testing for correct last block on EOT.
403 Release Version 2.4.0:
407 kes Make sure to clear JS_WaitMedia when operator mounts a Volume.
408 This fixes bug #1095.
410 kes Add create_postgresql_database.sql to Win32 installer. Should
411 fix problem reported by Juilio Monteiro.
412 kes Get correct slot when auto unloading a device. This fixes bug
415 kes Fix multiple media restore.
416 kes Make DEVICE Slot private and access it via a method.
417 Allows better control over when it is set and cleared.
418 kes Fix possible seg fault if SQL error.
420 kes Add Martin's fixes to argument scanning for the estimate
421 command. This fixes bug #1093.
422 kes Add debug code to SD.
423 kes Fix renaming a Volume, which used the wrong Volume name.
425 kes If operator has rewind tape, print warning, release tape and
426 try once more. If tape is positioned somewhere, something went
427 wrong, so mark the tape in error and try once more. Previously
428 this error was fatal, now it produces an error message.
429 kes Ensure correct volume name displayed during restore
430 kes Ensure that Volume is mounted for restore.
432 kes Fix a few more Coverity reported problems.
434 kes Apply Allan Black's status dir job count patch.
435 ebl Add information about IMPORT/EXPORT slots in mtx-script.
436 kes Enhance a couple of SD debug messages.
437 kes Tweak unload flag setting and ensure it is set during swap.
439 ebl Fix #1091 about bad output in estimate command.
441 kes Modify autochanger locking to attempt to avoid race
443 kes Make sure device not busy before doing label command.
444 kes Display open() errors except when polling. Previously too
445 many were suppressed. This should fix bug #1070.
446 kes Fix Win32 reparse points. Bacula will not recurse into any
447 reparse point directory, including mount points, unless the
448 directory is explicitly mentioned at the top level (same as
449 with Unix). A file that is linked to another file will be
450 backed up -- much as Unix does for hardlinked files.
451 This fixes bug #1041.
453 kes Remove double quotes from ChangeLog and ReleaseNotes
454 kes Remove StorageId test when pruning and recycling (Eric's changes).
455 kes Remove old form of locking when getting volumes -- causes deadlock.
456 kes Change bat dirstat layoutWidget to dirstatlayoutWidget to make
457 the name unique and to eliminate compile time error.
458 kes Add accurate.o to Win32 FD Makefile
460 kes Fix cats dll build on Win32 after db_update_job_end_record
461 calling sequence change.
462 ebl Switch to tokyo dbm instead of htable in accurate code
463 ebl Include tokyo dbm to bacula source tree
465 kes Fix buffer overruns detected by Coverity.
467 kes Tweak joblog display.
469 kes Implement --without-qwt
470 kes Fix layout of restore tree dialog
471 kes Add configure bat QWT libraries, so that bat can be built
472 with or without the QWT libaries.
474 ebl Add dummy tape driver for regression tests.
475 kes Make sure we unload the right slot when swapping.
477 kes Add debug times, reduce size of two-pool-changer test
479 ebl Tweak autoconf scripts for vtape
481 kes Improve SD reserve debug code.
482 kes Testing an improvement to free up volumes no longer in use.
484 kes Rework SD acquire for read to handle autochanger Volume
486 kes Implement regression that explicitly tests swapping a Volume
487 from one drive to another.
488 kes Enhance disk-changer to detect most error conditions.
489 kes Fix SD code so that it properly swaps a Volume between drives.
490 This fixes bug #1083.
492 kes Apply libdbi patch from Joao Freitas for regress and for
493 Bacula trunk. Regress now works with libdbi. Nice.
494 kes Apply .nobackup patch from bug #1077 submitted by
496 kes Apply Bastian Friedrich's patch that adds %p to edit the pool
497 name into jobs cloned via the run directive.
499 kes Prevent a Volume that is being swapped from being freed from
500 the volume list. This will most likely fix, at least partially,
502 kes Fix strippath so that it does not get a buffer overrun and crash FD.
503 This fixes bug #1078.
504 kes Remove 50 millisec wait in SD that broke debugger.
505 ebl Add MaxRunSchedTime option that specifies the maximum allowed time
506 that a job may run, counted from when the job was scheduled.
507 ebl Fix MaxWaitTime option that specifies the maximum allowed time that
508 a job may block waiting for a resource, counted from when the job starts
509 ebl Rename (add) Max(Incr|Diff|Full)WaitTime to Max(Incr|Diff|Full)RunTime
510 kes Apply patch from bug #1076 by Tullio Andreatta <t.andreatta@troppoavanti.it>
511 that implements multiple commands per line in the console when using
512 readline. Modify the default to use a semicolon as the command separator.
514 ebl Fix SQL query in migration code.
515 ebl Make accurate mode with hash disk pass regression tests
517 ebl Implement first cut of accurate backup with hash disk.
519 kes Force unload of volume when wrong volume mounted in SD.
521 kes Fix bat seg fault at termination.
522 kes Add Bacula generated version to bat about box.
525 kes Experiment with allowing multiple read jobs.
526 kes Move final volume swapping code to DCR method and
527 call it from acquire_for_read().
528 kes When wrong volume is mounted during read, unload_autochanger.
530 kes Integrate the libdbi changes from Joao Henrique Freitas
532 kes Stop searching for Volumes in SD askdir if DIR returns the
533 same volume name twice in a row.
534 kes Close bat console windows first to eliminate error message
537 kes Tweak the swap Volume from one drive to another code so that
538 it now seems to work.
539 kes Resolve several problems with recycling that broke the new
540 code (these problems are in 2.2.9 as well).
541 kes Remove the volume lock when calling the sysop code.
542 kes Don't mark a reserved volume with no writers as unused otherwise
545 kes Rework class structures for VOLRES, DCR, and DEVICE to make
546 the method names a bit more logical, and for more logically
547 handling the responsibilities.
549 kes Remove redundant code in terminating the scheduler that just
550 causes a seg fault in many cases.
551 kes Cleanup releasing a volume and make it a DCR method.
552 kes Improve algorithm for detecting pre-reserved volume and
555 kes Tweak volume swapping code so it works.
556 kes Correct name overloading in mount.c
557 kes Replace released flag in VOLRES with reserved and add access
558 methods for the VOLRES class.
559 kes Prevent volume from being released while being swapped.
560 kes Apply Bastian Friedrich's edit codes patch for the bpipe-fd
561 plugin that add %w (where) and %r (replace flag) editing to
563 kes Apply Bastial Friedrich's edit pool=%p patch for run clone
565 kes Refactor parts of stored/mount.c
567 ebl Add sanity checks for VolWriteTime and VolReadTime
568 ebl Take care of bad clock changes while computing VolWriteTime
569 and VolReadTime. This should fix or limit #1066
570 kes Correct error string numbers in dird/catreq.c
571 kes Restructure reserving, acquiring, and mounting volumes. Calls to
572 autochanger are deferred for mount.c -- simplifes the code.
574 kes Do not prune any running job. It just fails the job.
575 kes Lock the volumes when changing dev->reserved_device and marking
576 the volume unused otherwise the device can get reserved by
577 another job before the volume is released, thus blocking it.
579 kes Correctly detect Ubuntu systems, and add ubuntu platform directory.
580 kes Fix bug #1063, reuse of freed ptr in list nextvol.
581 kes Release regex compile buffer in filed/job.c
582 kes Add proper type of const char in sql_create.c
583 kes Turn off debug in daemon termination routines
584 kes Move free_volume_list() before devices are freed in stored.c
585 kes Fix reference to uninitalized stack variables in bregex.c.
586 This should correct bug #1067.
588 kes Fix possible seg fault in SD when freeing a volume entry.
590 kes Implement unload_dev() before swap device.
591 ebl Add statistics prunning with option and menu
592 kes Separate unload_dev() from unload_other_device() in autochanger.c
594 kes Apply patch from bug #1069 that corrects spurious error messages
595 when ACLs enabled on SGI but no ACL exists.
596 ebl Fix small segfault in bacula-sd when debug level is 500
597 kes Modify run_program() and run_program_full_output() to use
598 call by reference for the results string. This corrects a long
599 standing problem where the address of the string may be changed
600 in the subroutine but not in the calling program.
602 kes Re-enable code to remember last volume mounted on a non-tape
604 kes Add patch supplied in bug #1068 that fixes a SD crash when using
605 a Virtual autochanger.
606 kes Generate correct JobMedia records during spooling/despooling when
607 running concurrent jobs. Thanks to Tom Ivar Helbekkmo
608 <tih@hamartun.priv.no> for excellent analysis and testing.
610 kes Tweak hash algorithm for htable using Martin Simmons idea
611 for doing a circular shift.
612 kes Remember what volume is in VTLs (previously turned off for
614 kes Analysis of JobMedia records by Tom Ivar Helbekkmo <tih@hamartun.priv.no>
615 pointed out some problems in creating JobMedia records during
616 spooling with concurrent jobs. Fix the problem by updating the
617 start file position before despooling and generate a jobmedia
618 record at the end of despooling.
620 kes Fix handling of JobMedia records during spooling and when a
621 Volume is changed without actually writing data to the Volume.
623 kes Rework certain SD locking based on gdb tracebacks of deadlocks
624 sent by Eric. This code now uses only the volume_lock() rather
625 than the reservations lock when at EOM and acquiring a new
627 kes Ensure only one exit point in several subroutines.
629 kes Implement bsock code to permit locking. Use the new code in Verify
630 in the FD to prevent the heartbeat thread from disrupting the Verify
631 data sent to the Dir.
632 kes Modify SD locking to eliminate locking the reservations system from
633 outside the system. Use the volume lock when getting media data
634 and reserving a new volume at end of media.
635 kes Add Eric's volume_unused() fix to stored.c so that Volumes found
636 when SD starts are not locked into place.
638 kes Fix error compiling runscript code on 64 bit machines.
639 kes Tweak Win32 mount point code.
640 kes Fix a couple of bugs in the accurate code (bad sscanf, buffer not
641 cleared giving bad file estimate).
642 kes Implement BIG_MALLOC in htable code. Runs 2.5 times faster for
645 kes Keep Schedule run lists in order as suggested by
648 kes Implement autostart scripts for Debian.
649 ebl Implement upgrade catalog scripts.
651 ebl Apply jobstat patch for long term statistics. Have to implement
652 purge stats command and upgrade scripts.
653 kes Fix mtx-changer.in for broken Debian mt program.
655 kes Fix large number of JobMedia records reported by Eric Bollengier.
657 kes Apply doc fix from bug #1062.
658 kes Resolve crash and improper restore wx-console Win32 restore
659 GUI. Fixes bug #1065.
660 kes Update Win32 wxWidgets to latest version.
661 kes Attempt to do correct handling of Win32 mount points. Should
663 kes Fix Win32 FD backup/restore memory leak due to improper termination
664 of BackupRead/Write. This fixes bug# 1038.
666 ebl Reduce memory usage for accurate backup, working only with ctime
667 and mtime. (not all Lstat field)
668 About 40MB for my Linux system (400.000 files)
670 kes Add dcr->reserved_volume flag that allows us to release a volume
671 even if it is not vol->released. This allows maxvol2 to work when
672 Volumes expire and we are already writing to the device (i.e. a
673 volume is pulled out from under us by another job terminating after
674 we reserve the drive).
676 ebl Permit multiple command/console per runscript definition.
677 RunScript { command = /bin/true ; command = /bin/false ... }
678 ebl Add RunsWhen = AfterVSS to runscript. You can execute a command
679 (restart an application) just after the VSS snapshot on windows.
680 kes Don't zap dcr values during release_volume() as they might
681 have the next Volume to be mounted.
682 kes Fix AIX prototype.
684 kes Second cut of drive switching during backup.
687 kes Update Win32 version of wxWidgets to most recent version.
688 kes Tweak Copy job details.
689 kes Rework dir_find_next_appendable_volume to make a bit more effort
690 to find a suitable volume before giving up.
692 kes Make ask_sysop_to_create... to return if waken from wait.
693 This helps get out of blocked conditions.
694 kes Experimental implementation of switch_device in reservations.
695 kes Implement FD version to allow easier protocol changes.
696 kes Add Plugin Options string -- not yet passed to FD.
697 kes Implement PluginOptions ACL.
699 kes Attempt to correct problems with restores with autochangers and
700 use counts going negative
701 kes Rework SD status command and implement API for bat. Implements
702 header, runing waitreservation, devices, volumes, spooling,
703 and terminated status keywords.
704 .status storage=xxx <keyword>
705 kes Clarify TLS error message by adding double quotes around name.
706 kes Simplify SD/FD status code by putting api flag in STATUS_PKT
707 kes Pass jcr to tls routines so debug messages can be handled better.
708 kes Rework jobq resource allocation code, and possibly fix a bug
709 that caused reference counts to get out of sync.
711 kes Rename fd/dir plugin to use Bacula standard underscore.
712 kes Plugin work -- bring dir up to fd level.
713 kes Start implementation of VTL code
714 kes Fix Win32 build after adding new cats subroutine.
716 kes First cut at Duplicate Job implementation.
718 kes Fix bugs in MaxFullInterval and Implement MaxDiffInterval.
719 kes Start PluginOptions string, and refactor a bit of ua_run.c
720 ebl Apply Allan patch that permit to reset recyclepool.
722 kes Test patch -- possible fix or improvement for bug #1053
723 kes Refactor FD and SD status commands to permit new API code in
724 SD, and to fix Win32 build.
725 kes Win32 build is now working.
727 kes Implement 'MaxFullInterval' and start 'MaxDiffInterval' based on
728 some ideas in patch from Scott Bailey.
729 kes Begin implementation of duplicate Job control.
730 kes Fix some of Win32 build after recent additions.
731 kes Apply patch from Frank Kardel that implements 'honor no dump flag',
732 which causes the FD to detect whether or not the OS has the
733 honor no dump bit (*BSD systems), and if so, to skip backing up
734 any file with this bit set. The feature is enabled by setting
735 'honor no dump flag = yes' in the Options section of a FileSet.
737 kes Correct po warning message with datarootdir
738 kes Implement more code in dird.c to put configuration parsing in
739 a class rather than use globals.
740 kes Restructure SD status command for implementation of bat API
743 kes Suppress incorrect 'Will not descend from x into y' messages.
744 kes Eliminate FORTIFY_CODE=2 bug, and make first cut at removing
745 daemon globals used by parser.
746 kes Apply Joao's patch to separate DB_TYPE and DB_PROG in configure.
748 kes Fix free of plugin_list when none exists.
750 ebl Apply accurate project patch.
752 ebl Fix a segfault when using strip_path option. (Use of pm_strcpy
753 on non-mempool object)
754 kes First cut of converting FD .status to work with bat API.
756 .status client=XXX header
757 .status client=XXX running
758 .status client=XXX terminated
759 kes Implement first cut of Copy Job.
760 kes Implement Catalog in Pool resource. It overrides catalog specified
761 in the Client resource.
763 kes Apply patch (with some difficulties) from Joao Henrique Freitas
764 <joaohf@gmail.com>, which adds support for libdbi as a Bacula
766 kes Add patch from Martin Schmid scm@apsag.com that checks to see if
767 ftruncate() actually works. In the case of some (cheap) NAS devices,
768 it does not, and so recycling NAS Volumes does not work. The code
769 simply unlink()s the file, then recreates it. This fixes bug #1011.
771 kes First incomplete cut of big malloc blocks for htable.
772 kes Tweak plugin code.
774 kes Plugin debug code + tweak a couple bat dialog layouts
776 kes Fix creating first JobMedia record during Migration to include
777 proper index. This caused slow restores of migrated jobs.
778 kes Temp fix to plugin name file_index.
779 kes Bacula backed up and restored a MySQL database.
781 kes Implement plugin restore.
782 kes Implement parsing of db_driver to give db_type index.
784 kes First cut of plugin restore code.
785 kes Fix bug #1047, which had a heap overrun when stripping certain paths,
786 and do not strip paths on symbolic links.
787 kes Set catalog backup database and user name from values specified on
788 the ./configure line.
789 ebl Fix #1031 about wrong pool source information in job report.
792 kes Remove a redundant jcr argument to find_files, match_files, and
794 kes Implement '.status dir header|scheduled|running|terminated' that
795 prints the requested status section. With the exception of the
796 header, the other reports have fields separated by tabs (\t).
798 kes Apply patch from Peter Much <pmc@citylink.dinoex.sub.org> that fixes
799 a resource embedded run command to find a since time if no explicit
800 since time was supplied on the command line.
801 kes Apply state-file.patch sent by Allan Black <Allan.Black@btconnect.com>
802 that updates the state file at job termination time in addition to
803 when the daemon terminates.
805 kes First version where a plugin did a backup.
806 bpipe-fd.so created a backup file, wrote a test
807 string to it, and Bacua could restore this fabricated file.
809 kes Implement DB Driver = string for the DBI driver.
810 kes Remove all old bdb_xxx.c code. Add dummy routines to bdb.c
811 kes First cut of code for loading Win32 plugin dlls. Implement
812 dlopen, dlsym, dlclose, and dlerror in src/win32/compat/compat.cpp
813 and implement a dlfcn.h file based on opengroup's definitions of
816 kes First cut plugin directives.
818 kes Apply patch from bug #1049 to prevent stripping the path on a
820 kes Attempt to fix bug #1047 where stripping a path corrupts the
821 heap. Waiting for feedback.
822 kes Correct the Mount message not to suggest labeling a new tape
823 when doing a restore. Submitted by email by John Stoffel.
824 kes Attempt to work around gcc FORTIFY_SOURCE bug that crashes the
825 FD by using casting. Reported in bug #1042.
827 kes A bit of crypto cleanup. More later.
829 Release Version 2.2.8
831 kes Apply patch from Martin to correct bug #1040, bscan sets existing
833 kes Fixed important spelling error in doc -- bug #1045.
835 ebl Fix bextract to be able to extract non-portable Win32 data to
837 kes Move initialization of read/write res lock earlier in the code.
838 This fixes the crash with a null conf file. This fixes bug
840 kes Redefine CURES in lib/parse_conf to be URES and move it all
841 into lib/parse_conf.c -- this responds to bug #1042, but does
842 not fix it. The fix is not to compile with FORTIFY_SOURCE.
843 kes Backport to 2.2.8 fix de-referencing a NULL pointer in the scanner from
844 the trunk SVN. I don't think this was reported as a bug.
846 ebl Fix a bug during tape initialization with MTSETDRVBUFFER.
848 kes Fix Win32 build with new .def files and DLL_IMP_EXP ...
850 kes Add DataDespooling and DataCommitting status (committing is
851 the last despooling).
852 kes Finish implementation of new reservations code noted below.
854 kes Fix bsnprintf for float point numbers. I broke recently when
855 parameterizing some variables. This fixes bug #1036.
856 kes Undo recent reservations changes ... will apply them later
857 when they work better.
859 ebl Fixes #1034 which cause mysql to hang the connection after 8h
860 ebl Change default statistics target of filename.name and path.path
861 fields for PostgreSQL. This speeds lookup by indexes. Thanks
863 kes A few more tweaks to new reservation code. Make sure to clear
864 vol released flag when retaking volume. When reading label and
865 label is bad mark volume unused. When recycling, mark volume
866 unused so it can be renamed.
868 kes Fix reserve_volume() so it doesn't release a volume in use
869 (i.e. a volume entry not marked released). This should be
870 the last part needed to fix bug #1018.
872 kes Move Heartbeat documentation from Job to Director resource.
873 This fixes bug #1033.
875 kes Fix existing switch drive SD code to call autochanger to release
876 any old volume. This must be done to keep the autochanger from
877 releasing subsequently newly reserved volumes in doing a close().
878 This should fix bug #1018.
879 kes Fail if attempting to get console input in batch mode. This
880 should help fail RunScript console commands that are incomplete.
881 kes First cut implementing switch_drive() in SD (not actually called).
883 kes Implement first cut running console commands in a RunScript.
885 ebl Fixes bug #1028 where 'Selection Type' option was not usable
887 ebl Fixes bug #897 and bug #1005 where bacula doesn't display runscript
890 Release Version 2.2.7
892 kes Add new free_tls() entry point so that Win32 builds.
893 kes Fix compile warning in src/lib/util.c
894 kes Fix entry point for edit_job_codes() so that Win32 builds.
895 kes Fix seg fault Frank Sweetser reports in regression testing
896 on his systems. The problem was that the original author of
897 bsnprintf.c did not take into account the side effects of
898 using ++x in the argument to a #define.
899 kes Make SD protocol backward compatible with version 2.2.x.
901 ebl Fixes bug #1015 where bacula failed to restore acl to a socket
902 because Bacula no longer restores sockets.
903 ebl Always use ignorecase fileset option on win32 FD.
905 kes Apply patch from Michael Stapelberg <michael@stapelberg.de>
906 that implements double quoting include names in conf files,
907 and also allows piping input by having the first character
908 be a vertical bar (|).
909 kes Apply patch from Bastian Friedrich <bastian.friedrich@collax.com>
910 that implement %f in RunScripts to pass the FileSet name.
911 kes Skip leading | when lex input comes from a pipe as suggested
912 by Michael Stapelberg <michael@stapelberg.de>.
914 kes Apply patch for bsmtp Win32 daylight savings time fix supplied by
915 Nerijus Baliunas <nerijus@users.sourceforge.net>
917 kes Implement Plugin Directory and plugin events.
919 kes Implement a security enhancement: TLS authentication but no
920 encryption. Enabled by setting 'TLS Authentication = yes'.
921 Note when this is on, TLS encryption is turned OFF!
923 kes This patch corrects a problem where the maximum concurrent storage
924 jobs counter gets out of sync during restore jobs causing jobs to
925 'wait on max Storage jobs'. This patch fixes bug #1009.
927 kes This patch fixes bcopy so that it produces correct Volumes.
929 kes This patch eliminates spurious output to the console during a VerifyVolume
930 job that contains encrypted data. It fixes bug #1024.
932 kes This patch prevents the 'status dir' command from trying to use a scratch
933 volume and possibly moving it from one pool to another. This patch fixes
936 kes Add new include to postgresql.c suggested by Marc Cousins so
937 that it compiles correctly with pgre version 8.3.
939 kes Fix --archivedir addition to configure. Replace it with
940 --with-archivedir in configure.in This fixes the regression
942 kes This patch fixes bug #1012 where the job is canceled because
943 of Max Run Time exceeded when the job has not yet started.
945 ebl Apply Richard Mortimer patch that fixes #1016 when there are more than
946 one 'part' to write. Instead of each part being stored on disk,
947 written to DVD, then deleted from disk, all parts are written to disk,
948 and only the last is written and deleted from disk.
949 kes This patch fixes the status command to include the formating string for
950 JS_AttrInsterting. It fixes bug #1021.
951 kes This patch should fix the Mac OS X build problem on the latest
952 Darwin, where sys/types.h was not included correctly (apparently
953 due to a change in the Mac headers). The solution was to explicitly
954 ensure that it is defined for the ./configure.
955 This patch also has a rebuild of configure that includes the Debian
956 qt4 patch to check for qmake-qt4. This patch fixes bug #1020.
957 kes This patch should ensure that queued messages to the console are
958 displayed as soon as possible. It should fix bug 1007, but has been
959 reported not to work.
961 kes This patch fixes the infinite loop when trying to increase the
962 maximum number of volumes in a Pool during the add command.
963 This patch fixes bug #1008.
965 Release Version 2.2.6
967 db Remove extra data on estimate command in joblist for bat.
969 kes Cleanup of code in SD that sets the LastWritten date. This doesn't
970 really change anything, but is the beginning of doing it *right*.
971 To do it completely right the LastWritten date must be passed to
972 the SD, but it is not yet done.
973 kes Minor tweaks to some bat restore SQL.
974 kes This patch fixes bug #1003 where putting the message output from
975 a Verify job into the catalog results in a recursive loop. The problem
976 seems to show up only with postgresql (to be verified).
977 kes Correct %x to %p in postgresql debug statement.
979 kes Fix bug #942 where lots of emails where generated when the heartbeat
980 interval was low and Bacula wanted a different tape from the one in
983 ebl Add new SD despooling attributes and Dir inserting attributes
984 job status codes in the catalog (Status table).
986 ebl Use qmake-qt4 instead of qmake when available (debian system).
988 kes Add a security warning to src/cats/make_catalog_backup.in indicating
989 that passing the password via the command line (arg 3) is insecure.
990 This responds to bug #990 (it doesn't fix it).
992 kes Set default debug_level to zero. This corrects bugs #991 and #993.
993 kes Fix a crash in bat when it cannot connect to the Director for example
994 if the Director is not running.
995 kes Remove redundant INDEX (JobId) from File table in the trunk.
997 kes Make explicit exception to GPL in LICENSE to permit linking
998 the Win32 FD with Microsoft VSS code.
999 kes Apply the Solaris package patch from
1000 Masopust, Christian <christian.masopust@siemens.com>
1001 kes Apply the patch to optionally add a timestamp in the debug output
1002 submitted by Mariusz Czulada <manieq@wp.eu>.
1004 ebl Use PQerrorMessage instead of PQresultErrorMessage in postgresql
1005 backend (sql_strerror). Fixes bug #989
1007 kes Apply Michael Short's <mdshort@gmail.com> Win32 regress patch.
1008 It applied with no problems.
1009 kes Add PATH command to SunOS part of mtx-changer.in so that sed and
1010 awk are on the path.
1011 kes Redirect stderror to stdin on mt status command in mtx-changer.in
1012 since the status is returned on stderr on Solaris.
1013 kes Activate Close button on tray-monitor window. This fixes
1015 kes Check for NULL item in parse_conf.c before calling it. In the
1016 case of Device, there is no item and this caused a seg fault when
1017 Device appears in the conf file.
1018 kes Add a #define __CONFIG_H when including config.h in bacula.h. This
1019 avoids pulling in config.h multiple times in some new code.
1021 kes Fix spurious warning message printed when creating a volume with
1022 a LabelFormat. This fixes bug #976.
1024 Release Version 2.2.5
1026 kes Add JobId in place of Job name in all the Jmsg() output.
1027 kes Correct the APP_DESC for the Win32 storage service (remove an e).
1029 kes Make maxvol-test and new more strict maxvol2-test work.
1030 kes Print JobId in all Jmsg() job output.
1032 kes Add new SD despooling attributes and Dir inserting attributes
1033 job status codes. This fixes bug 961.
1034 kes Fix Win32 drive display in bat version browser. Fixes bug #962.
1036 kes Fix doc issue. This fixes bug #963.
1037 kes Fix listing performance problems in bat. Pointed out by
1039 kes Remove old debug code.
1040 kes Fix bat code that tests for Win32. This should fix bug #968
1041 kes Query 5 list wrong Vol after migration. This fixes bug #960
1043 ebl Fix #969 where user can't change Replace option in restore menu.
1045 kes Save jcr in thread specific data (tsd) for each thread.
1046 kes Make Dmsg() print JobId as -%u.
1047 kes Make Jmsg, Emsg, and others automatically pickup the jobid
1048 for the thread if it exists.
1049 kes Remove old reservation debug jid code.
1050 kes Remove get_jcr_from_tid() from OpenSSL and tls code.
1051 ebl Add an option that permit to specify spool size in job
1052 definition. (Applying patches/testing/spoolsize_per_job.patch).
1053 You must upgrade SD and DIR at the same time.
1054 dvl Add new configuration item --archivedir
1055 dvl Adjust regression tests to use tmp not /tmp. This will allow
1056 multiple concurrent runs of the regression tests.
1058 kes Fix race condition that drops final block written to volume.
1059 This happens in rare cases with multiple simultaneous jobs
1060 when the Volume fills. This fixes bug #964. May be related
1061 to bug #935 and possibly #903.
1062 kes Eliminate more strerror() and replace with bstrerror().
1063 kes Remove BSD getopt and replace with unrestricted IBM version.
1064 kes Fix Win32 build for changed calling sequences.
1065 kes More tweaks to the mount volume routines to get everything
1066 right. Changed variable name from find to have_vol, which is
1067 much easier to understand.
1068 kes Enhance btimer debug code.
1070 kes Fix FD->SD authorization failure, which was due to spurious
1071 wakeups from a pthread_cond_timedwait(). Simply check the
1072 predicate before continuing. This fixes bug #953.
1073 kes Add const char where needed (more to do). Remove temp debug code.
1075 kes Setup SQLite busy handler before doing queries. Fixes bug #967.
1076 kes Don't overwrite error message in check_tables_version.
1078 kes Unlock batch insert tables with same calls used elsewhere.
1079 kes Allow starting 59 jobs a second.
1080 kes Make SD session key more random.
1081 kes Add retry for SQLite opening db if it fails. Probably helps
1083 kes Suppress extra error messages during batch insert failure.
1085 kes Add jcr to timer packets so if killed message can be sent to job.
1086 kes Add JobId to all Dmsg() output.
1087 kes Put some FD auth code on dbglvl rather than fixed.
1088 kes Return insert attributes error message in db msg buffer to avoid
1089 false error messages. Helps fix bug #966.
1090 kes Separate batch init error messages. Probably helps fix bug #966.
1091 kes Make SD code that contructs attribute insert check string lengths
1093 kes If Dir gets an error during inserting attributes, cancel SD.
1094 This reduces unnecessary error messages.
1096 kes Correct search boolean for getting Volume info
1097 ebl Cleanup batch insert code. Probably fixes bug #965.
1098 kes Back out one small change to the reservation system (reserving a volume).
1099 kes Rework how a Volume is mounted. It is now much more intelligent and
1100 will always attempt to use any mounted volume if possible and reduces
1101 calls to the Director asking about volumes.
1103 kes Turn off some code when batch insert not enabled.
1104 kes Edit FD name in connect error messages.
1105 kes Rework the reservation system to take into account that the Director
1106 might give us a Volume that is different from the current one being
1107 used, and to ensure that we don't exceed Maximum Volume Jobs.
1108 This fixes (mostly) bug #947 ' Maximum Volume Jobs = 1 produces
1109 fatal error with multiple jobs running'
1110 kes Add more debug code in reservation system.
1111 kes Implement maxvol-test to check bug #947.
1113 kes Add code to handle tray monitor separated from Win32 FD.
1114 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
1116 kes Add missed return in fixing verify bug -- trunk only.
1117 ebl Fix a command parser issue causing a director segfault.
1118 kes Fix ANSI tape labeling. Fix restoring ANSI labeled Volumes.
1119 This fixes bug #954.
1120 kes Increase the max block size to 4MB fixes bug #957.
1121 kes ERABT if user sets min block size > max block size. Fixes bug #956.
1122 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
1123 is not properly mounted (recognized) during a poll.
1124 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
1125 Job that has differences reports Verify OK.
1126 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
1128 ebl Add an option to operate on all pools with update vol parameters.
1129 This complete the project 20. Patch from Nigel Stepp.
1130 ebl Add history support to bconsole when using readline.
1131 Using Ctrl-D to exit doesn't update .bconsole_history
1132 kes Modify new volume algorithm to use max MediaId for generating next
1133 volume number rather than the count of Volumes. This should essentially
1134 eliminate the failure rate if some volumes were deleted. Bug #921.
1135 kes Begin implemention of Optimize Job Scheduling.
1136 kes Implement restore callback that Dirk and I agreed on for bat
1137 restore. This fixes bug #928. Restore of backup of zero files fails.
1138 kes Fix SQL Catalog logging which broke with new db_escape_string
1141 Release Version 2.2.4
1143 kes Fix bacula_cats.def for new db_escape_string().
1144 kes Increase size of name string when FD making connection to SD.
1145 May fix bug #953. FD->SD connection failure.
1147 kes Add code to help Dan debug 2drive-incremental-2disk test.
1148 kes Add code to try to fix bug #908.
1149 kes Add waits to multiple exit detection code to try to force pid
1150 file to always be deleted.
1151 kes Restore good dev.tar.gz to rescue set appropriate binary property.
1152 This fixes bug #950.
1153 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
1154 trying to switch drives by checking for blocking before unblocking.
1156 kes Cancel storage daemon in all cases where FD reports error. This
1157 should fix virtually all cases of bug #920.
1158 kes Fix db_escape_string() for MySQL which did not compile.
1160 kes Fix error message that was clobbered when Dir tells SD it does not
1161 have write permission on Volume. This should fix a minor point
1162 in bug #942, but not the main problem.
1163 kes Add code to cancel job in SD if FD connection fails. This should
1165 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
1166 dvl Pass jcr and db into db_escape_string() to enable better escaping
1168 kes Fix migration code to get correct Volume name with multiple volumes
1169 by skipping |. Fixes bug #936.
1170 kes Implement patch supplied by Landon to fix bug #944 where using
1171 TLS with bconsole uses 99+% of the CPU.
1172 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
1174 kes Move patches into patches directory.
1176 ebl Fix bug #946 about 'bacula-dir -t' which doesn't works
1179 ebl Using 'm' in bconsole will show messages like before,
1180 and not memory usage.
1181 kes Fix bug #935, and probably also bug #903 where files were not
1182 restored. MediaId was not properly set in JobMedia record after
1185 kes Suppress chown and chmod error messages if the FD is not running
1188 kes Apply Martin Simmons' patch that should turn off the new API usage
1189 when batch insert is turned off allowing building on older
1191 kes Add ./configure search in qwt-qt4 for qwt package
1193 kes Bacula is now free of 3rd party GPL copyrighted code!
1194 kes Remove idcache.c
1195 kes Add guid_to_name.c/h which replace idcache.
1196 kes Remove enh_fnmatch.c. Make code that references it use fnmatch.c
1198 ebl Detect if new PosgreSQL batch insert API is present.
1199 kes Correct incorrect mempool call causing Director crash. Occurs on
1200 systems without va_copy().
1201 sb Update spec files for 2.2.1 release
1203 kes Fix memory pool call in ua_output.c. bug #934.
1204 kes Replace fnmatch.c and fnmatch.h by modified BSD versions.
1205 Add test program to fnmatch.c
1207 kes Integrate patch to README.vc8 from
1208 Hederer Jean-Sébastien <hedererjs@asperience.fr, had to manually
1209 edit it to get it into Unix patch format.
1210 kes Implement mkpath.c to replace old FSF makepath.c
1212 kes Implement savecwd.h and savecwd.c. Remove FSF versions.
1214 Release Version 2.2.1
1216 kes Update POTFILES.in
1217 kes Cleanup a few underquoted AC_DEFUNs in configure
1218 kes Apply patch from Martin Simmons that adds a test for va_copy to
1221 kes Fix bug #921 by increasing the number of tries to create a new volume
1223 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
1224 can be called multiple times. Implement a version for machines
1225 without va_copy() that gets a big buffer.
1227 kes Integrate more portable zone offset code into bsmtp.c
1228 Submitted by Attila Fülöp.
1230 kes Fix bad SD->FD return status reported by
1231 (James Harper) <james.harper@bendigoit.com.au>
1232 ebl Fix a bug in read_close_session which return random status
1233 thanks to James Harper
1235 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
1236 and directory names during restore of single file/directories.
1237 kes Add sanity checks to .sql command when string is empty. Hopefully
1238 that will resolve Dirks Director crash.
1240 kes Apply patch submitted by Martin Simmons that corrects a seg fault
1241 in the bsmtp chat subroutine when debug is >= 10.
1243 kes Fix Director crash when running bat SQL queries.
1244 kes Add David's notes on Item 8: Copy pools.
1246 kes Rework projects file to be current and ready for a vote.
1247 kes Enhance lex scanner error message.
1249 kes Tweak LICENSE file to mention BSD code.
1250 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
1251 if specified on the ./configure.
1252 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
1253 This class is intended to allow us to open a second bsock to the
1254 Director while in the restore subdialog.
1256 kes Fix configure to create bat Makefile before creating dependencies.
1257 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
1258 kes Add a tooltip to the tray monitor.
1259 dvl Set the Director's PID file before dropping privs. This fixes
1262 kes Update AUTHORs file
1263 kes Increase the default max concurrent jobs to 20 in FD and SD to
1264 correspond with the default .conf files.
1265 kes Rewrite the Win32 service routines. This eliminates the 3 copies
1266 some different, of the same file created by RN when porting the
1268 kes Rearrange some of the Win32 directories and the placement of the files
1270 kes Set DEVELOPER flag in version.h
1272 ========================================================================
1273 Release Version 2.2.0
1275 kes Apply a second doc patch from Marc.
1276 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
1277 improves the tips section that discusses how to setup multiple
1280 kes Update bat README file.
1281 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
1282 corrects a typo in the Recycle status check in db_find_next_volume().
1283 This will probably fix a number of annoying problems with multiple
1285 kes Modify most of dird/msgchan.c to use bsock class calls rather than
1286 bnet calls -- no functionality change.
1288 kes Modify the Verify output to specify if files are missing on
1289 the Volume(s) or disk. Fixes confusion in bug #916.
1290 kes When more than one Volume is read in a migration job, the last
1291 Volume bytes reported are from the last read volume rather than
1292 the last written volume. Fixed. This fixes bug #910.
1293 kes Fix display of Recycle flag after update volume=foo recycle=yes.
1294 It previously printed New Recyle flag is: no. This fixes bug
1297 kes Correct seg fault when switching tape drives during restore.
1298 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
1299 be used until after 2.2.0 release.
1301 kes Remove fnmatch() in SD that permitted wild card specifications.
1302 This fixes bug #914.
1304 kes Fix %g in filename returned by SQL for browse tree reported by
1306 kes Fix configure so that it puts config.out in the cwd rather than
1308 kes Attempt to fix the locking problem reported by Eric in bug #906.
1309 kes Make berrno class to leave errno unchanged after constructor call.
1310 kes Make bnet_server use the heap rather than the stack to allocate
1311 its socket fd pointers to avoid a crash at termination. Problem
1312 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
1314 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
1315 and putting it in depkgs-qt along with Qt4.3.
1317 kes Rework code in acquire.c that switches drives for reading when
1318 the Media Type does not match. This should fix bug #906
1320 ebl Fix a director segfault during job setup #907
1321 kes Correct seg fault in postgresql when first operation returns no
1322 rows. Fixes Dirks File browser problem seg fault with bat.
1324 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
1325 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
1328 kes Implement PopUp YES/NO dialog for bat.
1330 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
1332 kes Correct RunScript to terminate job in FD on failure.
1333 kes Change abort_on_error and AbortJobOnError to fail_on_error
1334 and FailJobOnError in RunScripts.
1335 kes Minor tweaks of code formating in RunScripts, principally to
1336 avoid depassing 80 columns.
1338 kes Eliminate one #ifdef Win32 in bsmtp
1339 kes Implement grow tool to grow a file for testing very large databases.
1340 kes Add big-vol-test to test Bacula seeking with > 5GB.
1343 kes Modify find_next_volume() to return all values in Media record.
1344 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
1348 kes Update Release notes
1350 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
1351 Warning, in previous beta version, all media get from scratch keep their
1354 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
1355 This should fix bug #842. Made a note to look at removing the temp
1356 files at the end of the install.
1357 kes Add ability to mount and unmount a file device providing it is
1358 marked as being removable and has the appropriate mount and unmount
1359 commands defined in the Device resource. This fixes bug #830.
1360 kes When applying a storage override, release all previous storage
1361 definitions rather than just prepending the new storage.
1362 This should prevent a good deal of confusion.
1364 kes Implement ./configure search for qwt libraries.
1366 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
1367 Win32 FD. This should fix bug #893.
1368 kes Remove an unnecessary beep in Win32 init code.
1369 kes Update copyright dates in Win32 executable about boxes.
1370 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
1371 code with a BSD getopt.c and getopt.h.
1372 kes Remove sched.h from the Win32 compat directory -- not used.
1373 kes Remove the Exit menu item from the Win32 tray monitor. If you really
1374 need to shut it down, do it through the services panel or the command
1376 kes Remove some inappropriate Bacula FSFE copyrights.
1377 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
1378 kes Fix regress config non-portable test as pointed out by
1379 Florian Heigl <florian.heigl@gmail.com>
1380 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
1381 as pointed out by Florian Heigl <florian.heigl@gmail.com>
1383 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
1384 Reported by Frank Sweetser.
1388 kes Fix client-only build.
1389 kes Integrate client-only fixes for bsys (initgroups) and conio from
1390 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
1391 kes Make arguments to get_scratch_volume() in same order as other
1393 kes Rework the prune_volumes() subroutine so that after purging and
1394 no volume found in desired pool, it will check for a scratch
1395 volume. This prevents recycling the whole scratch pool.
1396 kes Add code to status storage to print boffset_t (largefile support).
1398 kes Move qwt (Graphics libarary for Qt4) to depkgs.
1399 kes You now need a --with-qwt=<dir> to be able to build bat.
1400 kes Update src/win32/cats/bacula_cats.def to include the new
1401 db_get_query_dbids() call on Win32.
1403 kes Correct a problem when selecting a scratch volume and moving
1404 it to another pool that lost some columns.
1405 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
1406 kes Enhance Autochanger error messages to include Volume and device name.
1407 kes Rework prune_volumes() code to take account of InChanger flag,
1408 and to handle recycling volumes going to the Scratch pool and
1409 current pool because the RecyclePool directive.
1410 kes Implement a better and more efficient db_get_query_dbids() to
1411 handle creating and passing back a list of DBIds.
1415 kes Start work on new more efficient DBId subroutine. First use
1416 will be for recycling volume to Scratch inchanger.
1417 kes Increase number of JobIds in pruning from 1000 to 10000.
1418 This to be replaced by above routine.
1419 kes Begin implementation of building Qt4 on Win32.
1420 kes Correct typo in fix I added for bad TLS shutdown.
1421 kes Pull 2.0.3 patches into patches directory.
1422 kes Update Release notes. Include qt-console in line count.
1423 kes Update Projects file.
1425 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
1426 bug in migration code where a job that spanned two volumes
1429 kes Implement new BST_DESPOOLING blocked state. Change from locking
1430 during despooling in SD to blocking. This means that other threads
1431 can work with the device structure, in particular the reservations
1432 system while despooling.
1434 kes Fix return in reservation message queue that missed clearing
1435 the jcr lock (implemented 26Jun07 below).
1436 kes Rename a number of dev methods to make locking function names
1438 kes Document locking in lock.c. Move lock structures to new file
1441 kes Move reservations message lock to lock jcr only this
1443 kes Move main SD locking code into lock.c (new file).
1444 kes Update Win32 build to include lock.c
1448 kes Dirk committed the qwt library code for drawing graphs in bat.
1449 kes Tweak install of qwt so that it is integrated with ./configure.
1451 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
1452 out by Eric (my typo).
1453 ebl Fix configure.in to get batch mode enable
1454 kes Return correct string from authenticate.cpp in bat when connecting
1456 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
1457 spurious line drops when using TLS.
1458 kes Do not file reparse points when restoring a file that already
1461 kes Implement Windows reparse points -- similar to directories, but
1462 we do not descend into it. This is a first cut. They seem to
1463 be backed up, but restore is not yet tested.
1464 kes Remove restore_blocking in tls code when shutting a socket to leave
1465 it in blocking mode. Hopefully this will fix the encryption bug
1466 reported by Frank Sweetser.
1467 kes When opening a file for backup, tell the OS that we are going to
1468 read it sequentially -- optimization.
1469 kes Change variable names in authenticate_director() to not conflict
1470 with member names in bat. Caused great confusion with compiler,
1473 kes Queue openssl error messages in case of comm problem.
1474 kes Do shutdown() call if socket terminated.
1475 kes Remove some duplicated code in tls.c
1476 kes Move more of the bsock member variables into private and access
1478 kes Add Frank Sweetser's tls-test to the regression suite.
1480 kes Add Swedish sv.po file
1482 kes Don't print clock skew message in FD if less than 3 seconds diff.
1483 kes Add a bit of VSS info to status client.
1484 kes Implement a first cut of Vista VSS, using Win2003 code.
1486 Release: 2.1.20 beta
1488 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
1489 loaded tape but uses first drive).
1490 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
1491 This was indeed a Win32 issue.
1493 kes Simplify search of autochanger for in-use Volume.
1494 kes Fix exit condition of check for in-use volume. kes Remove
1495 inappropriate my_postgresql_free_result() in db_close()
1497 kes Fix bad return in FD when encryption signature not found.
1498 Probably caused a crash.
1499 kes Inhibit missing encryption signature error messages for
1500 file types where no signature computed.
1501 kes Correct inverted check on autochanger in reservation system.
1502 kes Tweak debug code in autochanger reservation.
1504 kes Add some additional locking in the cats directory in subroutines
1505 that modify packet variables called from batch insert.
1506 kes Rework how dcrs are allocated. new_dcr() can now be called
1507 with an existing pointer, and it will simply clean it up.
1508 This allows the reservation system to test various different
1509 devices, and will permit easy device changes.
1510 kes A bunch of changes all over to handle new new_dcr() calling
1512 kes Work more on the Volume management in the SD. Remember Volumes
1513 for tape drives and for autochangers (even virtual disk changers).
1514 kes When looking at the Volume list to reserve a drive, handle
1515 autochanger names correctly by interating through the changer
1516 devices. Also call the Director to see if a Volume is suitable
1517 for the current job.
1518 kes Fix some bugs in bscan. Make sure all media records are written.
1519 Make sure that valid JobMedia records are written for disk files.
1520 Previously they were completely wrong.
1521 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
1522 that the URLs don't change and so that the developers will all
1523 work off the same copy. Rebuild from scrach.
1524 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
1526 Release: 2.1.18 beta
1528 kes Fix seg fault in FD from incorrect digest size.
1529 kes Fix argument to non-OpenSSL crypto.c subroutine.
1531 Release: 2.1.16 beta
1533 kes Remove a few malloc()s from the encryption code.
1534 kes Use the class calls to bsock in filed/backup.c and restore.c in
1535 place of the old bnet_xxx code.
1536 kes Implement code that does an on the fly calculation of the
1537 signing digest during restore of encrypted files. It makes
1538 a best guess at the algorithm, and if it is not correct, will
1539 then revert to the old code which reads the file after it is
1541 kes Implement at least one missing crypto stream in stream_to_ascii()
1542 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
1543 #877 where a reload with bad syntax causes Dir to exit.
1545 Cut: 2.1.14 beta (not released)
1547 kes Do not free a volume on a tape drive until another volume is
1548 mounted and read, or the autochanger unloads the volume.
1549 This should help the SD re-use volumes that are already mounted,
1550 and should fix bug #886.
1551 kes Apply patch from user brettedgar that allows gnome2-console include
1552 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
1553 kes Apply patch from Lucien Weller that fixes day of week calculation
1554 because of DST flag problem. Fixes bug #887.
1556 kes Move find_next_appendable_volume() to after acquiring a valid device
1557 in reserve.c. This fixes bug #864 -- confirmed by reporter.
1559 kes Unable to reproduce bug 872. However added additional testing for
1561 kes Bug #874 resolved by documenting SQLite limitations.
1562 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
1563 kes Bug #881 resolved by removing typo in mtx-changer script.
1564 kes Made Frank Sweetser's wiki the official Bacula wiki with his
1565 approval. Added a link to the wiki on the web page, and implemented
1566 a backup from http://paramount.ind.wpi.edu
1568 kes Fix update allfrompool to pass pool name.
1570 kes Convert to pure GPL v2 license.
1571 kes Fix sscanf problems reported by Peter Buschman that caused
1572 a bus error on Solaris.
1573 kes Rework (simplify) the select prompt in bat.
1574 kes Move get_jobid_from_tid() into lib and create a
1576 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
1577 should definitely fix the problem of lost error messages in the
1579 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
1580 kes Eliminate tcpd.h from the project. Enclose the #include from the
1581 library with extern C ...
1582 kes Add print of signal name when a signal is trapped.
1584 Release: 2.1.12 beta
1586 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
1588 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
1589 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
1590 makes SQLit3 run 30 times faster, though a bit less safe.
1591 kes Implement --with-batch-insert in configure and detection of thread
1592 safe libraries. It is on by default, but turned off if no thread
1593 safe library (e.g. SQLite 2) is available.
1595 kes Fix Bacula PostgreSQL buffer overruns.
1596 kes Do better checking for NULL results returned from PostgreSQL;
1597 implement retry for failed queries; clear results buffer after
1598 failed query. Hopefully this will correct the PostgreSQL failures.
1600 kes Implement algorithm to handle only one appendable volume with
1601 Prefer Mounted Volumes = no.
1602 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
1603 returned from a query.
1604 kes Make volume lock recursive.
1605 kes Implement an additional volume reservation algorithm that
1606 starts by considering all reserved volumes then uses the
1607 old brute force algorithm of searching the resources to
1608 find a suitable device.
1609 kes Add new reservations debug code and refine the old code.
1610 kes Update the win32/dll/bacula.defs file.
1612 kes Tweak reservations algorithm to permit a few more cases, i.e.
1613 volume reserved, but on different drive, ...
1614 kes Enhance SD status to include Pool and Media Type for drive in a
1615 more readable format (a bit longer).
1616 kes Fix PostgreSQL double free.
1618 kes Minor refactoring of restore decryption code.
1619 kes Add code to smartall.c to detect double free of a buffer.
1621 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
1622 so that bsmtp will create a correct email address (mailbox only).
1623 kes Modify 'memory' command so that the buffers are listed as 'In use'
1624 to avoid confusion with Orphaned buffers.
1625 kes I reworked the OpenSSL include/lib flags to be handled in
1626 the standard Bacula way, which should fix bug #863 concerning
1627 non-standard OpenSSL libraries.
1629 kes Implement Help Browser window for bat.
1630 kes Fix reload bug that reset StorageId to zero.
1632 kes Fix TLS #ifdefing when TLS turned off.
1633 kes Ensure that when labelling a tape with Slot=0 that InChanger
1635 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
1637 kes Add StartTime to final uar_sel_jobid_temp query so that we can
1638 add DISTINCT (required by PostgreSQL).
1639 kes Implement BSOCK authenticate_director() method. Eventually will
1640 authenicate all daemons.
1641 kes Move several more functions into the BSOCK class.
1643 kes Add code to tell the OS that we no longer need a cached
1644 file that we were reading. In findlib/bfile.c. Also,
1645 only cache files that we are reading. Thanks to
1646 Tobias Oetiker <tobi@oetiker.ch> for the idea.
1647 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
1648 kes Implement script to automatically generate cats and dll .def
1649 files for Win32 dll.
1650 kes Update README.mingw32 to include new .def file generation.
1651 kes Correct typo in UTF-8 error message as reported by:
1652 jhernandez <julianhernandez@gmail.com>
1653 kes Add additional sm_check() code on debug level 1.
1654 kes Set default debug level to 1.
1655 kes Trap SIGABRT in attempt to get traceback.
1657 kes Reduce bat connect timeout from 30 to 15 seconds.
1658 kes More restructuring and implementing BSOCK class in place of
1660 kes Remove a few unnecessary malloc() tests in crypto code.
1661 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
1662 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
1663 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
1665 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
1667 kes Fix Verify InitCatalog. The attributes were not pointing to the
1668 correct saved location.
1669 kes Implement message callback so that GUI is sure to get all
1670 daemon messages. Currently displayed in a dialog in bat.
1671 kes Ignore SIGUSR2 (Bacula timer) in bat.
1672 kes Apply regress patch from bug #859 to allow regress to work
1673 with Solaris compiler.
1675 kes Begin adding TLS support to bat.
1676 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
1677 clean up lex.c and make it more readable.
1679 kes Move more bnet functions into the BSOCK class.
1680 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
1681 kes Complete change of berrno strerror() method to bstrerror()
1683 Release: 2.1.10 beta
1685 kes Cleanup incorrect email addresses in bsmtp.
1686 kes Make bat display initial messages rather than discard them.
1688 kes First cut of adding .mod to the run command.
1689 kes Implement auto display of messages in bat.
1690 kes Enhanced preferences to allow all Bacula output to be
1693 kes Try to make bsmtp date routines more generic.
1694 kes Fixed bug #856 autochanger documentation.
1695 kes Rework bsmtp date editing for Win32. This fixes bug #854.
1696 kes Add new cats entry point so Win32 builds.
1698 kes Attempt to fix bsmtp date editing on OSes without %z editing.
1700 kes Do better checking for the MySQL 64 bit libraries looking for both
1701 .a and .so libraries.
1702 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
1703 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
1704 kes Require the thread safe version of MySQL during configure. Thanks
1705 to Andre Noll for pointing this out.
1706 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
1707 continuing in migration code.
1708 kes Apply implementation of tray-monitor font derived from gnome-console
1709 submitted by Andreas Piesk <a.piesk@gmx.net>
1711 kes Eliminate important memory loss in SQLite
1712 kes Fixed the batch insert MySQL thread specific data that was not
1713 being freed. See cats/mysql.c:db_thread_cleanup().
1714 kes Fix restore before command.
1715 kes Convert old hdr.name to name() in a few places.
1716 kes Implement update jobid command.
1717 kes Return all time_t dates in db_get_job_record()
1718 kes Stop watchdog in SD earlier.
1719 kes Put Pool just after Storage in please mount message.
1720 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
1723 kes Update the po files.
1724 kes Fix Verify InitCatalog by making it cache attributes.
1726 kes Change name bacula-bat to bat for man 1 page to correspond to
1728 kes Check for client and store NULL pointers in status command. This
1730 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
1731 kes Fix sign extended editing of %p.
1732 kes Clean out a little old #ifdefing in cats/mysql.c
1734 kes If time diff between DIR and FD is more than 600 seconds convert
1735 INFO message to WARNING.
1736 kes Implement heap size display in status for all daemons.
1737 kes Attempt to fix MySQL db open memory loss (not successfull).
1738 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
1739 kes Eliminate memory loss in MySQL (possibly other SQLs) during
1740 Query. This looks like a MySQL but but by doing extra releases,
1741 the memory goes away. This should fix bug #847.
1743 kes When backup fails, cancel SD before waiting for sd termination.
1744 kes If SD is waiting for FD to connect during cancel, wake up the
1746 kes Fix fsf code so that errno is correctly reported.
1747 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
1749 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
1750 so that Bacula doesn't later stumble into a seg fault.
1751 kes Use the term Restore Client in the restore Job report.
1752 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
1753 the original job's FileSetId.
1754 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
1755 spooling in migration jobs. Not yet tested.
1756 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
1757 reading conf file from a pipe. However, do it with open_bpipe()
1758 rather than popen. Not yet tested.
1760 kes Fix an ugly bug where the VolCatBytes were getting updated
1762 kes Implement bconsole memory command that prints current memory
1763 usage, plus smartalloc dump.
1764 kes Clarify some error messages in backup, admin, and migrate.
1765 kes Shrink label dialog to smaller size.
1766 kes Invert Cancel OK buttons on restore to be OK Cancel.
1767 kes More strerror() to bstrerror() conversions.
1769 kes Start implementing bstrerror() in place of strerror().
1770 kes Stripping path -- seems to work.
1772 kes Prevent door and port files from being restored (mostly
1774 kes Free an unreleased buffer in compat code.
1775 kes Change console Job name from *Console* to -Console- to eliminate
1776 Win32 filename problems. Put Win32 path separator when creating
1777 Console file. This fixes bug #846.
1778 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
1780 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
1782 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
1783 to force Win32 error message.
1785 kes First cut strip path. The data should be passed to the FD,
1786 but nothing is done with it yet.
1787 kes Enhance the digest and signature routines in the crypto
1788 library to accept a JCR and to use it to print error messages
1789 so that they will go in the Job report rather than the daemon's
1791 kes Simplify some of the verify signature code.
1792 kes Simplify a few of the alternative returns in the signature
1795 ebl Use only POSIX regex instead of GNU regex in breg.c for
1796 File relocation. It fix broken freebsd compilation.
1797 kes Convert all other Dir files to use new ua class message
1799 kes Tentative fix for missing digest signature in bug 807.
1800 kes Correct handle problem in new win32_ftruncate routine.
1801 kes Convert ua_purge.c and ua_update.c to use new ua class
1802 message routines for bat.
1804 kes Correct incorrect installation of LICENSE in Win32 installer.
1805 kes Display LICENSE at the beginning of the Win32 install.
1806 kes Attempt to correct the need for the png files to be installed
1808 kes Reapply my bat.conf install script in qt-console. I think I
1809 editted bat.pro instead of bat.pro.in and it was lost.
1810 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
1811 the /var/lock/subsys for subsysdir. Also corrects typos in the
1814 kes First cut update job.
1815 kes Correct configure to include qmake of src/qt-console directory.
1817 kes Make restore job yes/mod/no print in one command so GUI works.
1818 kes First cut implementing backup and restore client.
1819 kes Correct editing in Verify output that caused a seg fault.
1821 kes Insure that bat.conf is not overwritten during installation.
1822 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
1823 while I was implementing migration in March 2006 !
1825 ebl Cleanup file relocation, using char *RegexWhere instead of
1826 char *where + bool where_use_regexp
1827 kes Update some manpages and add bat manpage.
1828 kes Make a first cut at converting bacula.spec.in for bwx-console
1830 kes Apply patch from John Goerzen to add hostname as fourth argument
1831 to make_catalog_backup script.
1832 kes Fix typos I introduced into bsmtp.c
1833 kes Make pm_strxxx() routines handle input of NULL pointer. This
1834 is to protect from NULL pointers returned from SQL databases.
1835 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
1836 kes Add more debug to FIFO code -- fix fifo regression test.
1838 kes Implement posix_fadvise in FD, and for reading spool files in SD.
1839 kes Add thread timer to bnet_connect() to break from OS if wait time
1842 kes Update Win32 build to include new files, new symbols, and
1844 kes Implement socket level heartbeat (tcp_keepidle)
1845 ebl Commit File relocation patch
1846 kes Make bat have 'make install' target.
1847 kes Warn during install if old gnome-console binary found.
1848 kes Warn during install if old wx-console binary found.
1849 kes Add -8 option to bsmtp command line to add content type utf-8.
1850 Fixes bug #809. (Character coding problem in bsmtp).
1851 kes If < is found in target (from, to, cc) then do not enclose the
1852 target in < > in bsmtp. Fixes bug #772 (malformed address).
1853 kes When printing certain items in dbcheck, stop after 300000.
1854 Fixes bug #822. (dbcheck loops).
1855 kes Incorrect status in Dir after waiting for mount with poll set.
1858 kes Extend idea of Prefer Mounted Volumes to mean a volume about
1860 kes Print waiting to reserve a device every 5 mins.
1862 kes Don't call close_part in label.c if tape and relabel.
1863 kes Don't free volume if busy in close() -- should help with
1865 ebl Fix #824 RunScript bug (After script could be execute twice)
1866 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
1867 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
1868 Add a regression script to test RunScript
1870 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
1873 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
1874 deprecated. No additional bugs will be fixed, and they will be dropped
1875 in a future release (probably 2.4.0).
1876 kes Change name of wx-console to bwx-console to make it more Bacula
1878 kes Change the name of gnome-console to bgnome-console to make it
1881 kes Some time in March, a Feature Request with patch from Jorj Bauer
1882 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
1884 The ability for the director to validate a Client (FD) CN against
1885 an arbitrary set of patterns rather than the hostname, with
1886 A new 'TLS Allowed CN' set of directives which are implemented
1887 in the Client resource. Then pattern matching is used in place
1888 of hostname matching against the Certificate's CN. As an example, we
1889 have certificates which (a) use a local CA, and (b) have a CN of the
1891 kes Add new/changed entry points to Win32 build
1892 kes Create unaccepted-projects for projects that are not accepted.
1893 kes Simplify locking in the reservations system.
1894 kes Add more debug code in reservations.
1895 kes Make sure error condition on reserving a volume is handled correctly.
1896 kes Correct handling of volume_in_use.
1897 kes Correct handling of initializing a device.
1898 kes Move handling of broadcasting releasing a device into release_device().
1899 kes Correct attaching dcr to dev so that it is only done if device
1900 is properly initiated.
1902 kes Locking debug level tweaks in SD.
1903 kes Tweak new Volume code.
1905 kes Add exec external-command [wait-seconds] to bconsole. This
1906 executes the external-command. Note! normally external-command
1907 should be enclosed in double quotes.
1908 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
1909 it should normally be off in a production system.
1911 kes Implement die command for SD so that we can force it to dump.
1912 kes Implement SD lock debug code.
1913 kes Implement new algorithm for keeping Volume list in SD. It
1914 is now owned by the device.
1916 kes Implement new code for freeing in use volumes that should
1917 resolve if not all, some of the problems of multiple drive
1918 tape conflicts described in bug 801.
1920 kes Fix gui/bacula-web/images files in svn.
1921 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
1923 ebl Fix a bug in batch mode (in string escape)
1924 kes Correct migration prune SQL typo that crept in in a
1925 recent 2.1.x change.
1927 kes Move bnet_despool() into class in bsock.c
1928 kes Modify job report to include director name and Build OS.
1929 kes Move drop root privilege and check_catalog() before fork.
1930 kes Add update database scripts (version 9 to 10) to updatedb directory.
1932 ebl Check size and age of each file after its backup to see if
1933 it has changed during backup, if 'checkfilechanges' is set.
1934 The FD will do an extra check (stat(2)) after
1935 each file backup. mtime, ctime and size are compared with
1936 'before backup' information. If time or size mismatch, an
1937 error message will be generated. You must upgrade FD to use it.
1939 kes Make database name and user configurable
1940 --with-db-name=xxx --with-db-user=xxx
1941 kes Add back database type to message.c for debugging.
1943 kes Implement dir_sql() which issues an SQL query.
1944 kes Modify bat medialist to use dir_sql() and do some minor C++
1945 formatting as well as eliminating a number of pointers, simplifing
1948 kes Fix some of the mtx-changer grep commands for tape label readers.
1949 kes Convert a number of bsendmsg into the appropriate send/warning/error
1950 message class calls.
1951 kes Suppress the using database message in the .sql command.
1952 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
1954 kes Add context menu for floating a window.
1955 kes Some minor cleanup and name changes in qt-console
1956 kes Add doing mt setblk 0 in Win32 mtx-changer.
1957 kes Apply Martin's bug fix to move definition of ENODATA for
1959 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
1960 sqlite2 and sqlite3.
1962 kes More pruning cleanup.
1963 kes Turn on wait_for_drive by default in mtx-changer.
1964 kes Turn on Batch insert code by default as it now passes regression.
1965 kes Add ./configure --enable-bat to enable building of Bat.
1966 No install yet though.
1968 kes Implement a new .sql command for bat.
1969 kes Implement code to turn off pruning in obtaining the next volume.
1970 Pruning is turned off for the status dir command, but turned on
1971 for SD requests and for the list nextvolume command.
1973 kes Correct Qmsg() that was not updated correctly when committing a
1974 previous change (probably the recent TLS patch).
1976 kes Write new subroutine is_volume_purged() that explicitly checks
1977 if the Volume is purged, and if so marks it as such. This should
1978 resolve problems reported about needing to mount twice to recycle
1980 kes Rewrite pruning algorithm to do more work in the SQL engine, and
1981 to pass a list of JobIds to be deleted to SQL. Also, minimize the
1982 amount of duplicated code.
1983 kes Do volume pruning only for the Media Type desired (reduces pruning time
1984 if multiple Media Types are in the same pool).
1985 kes Implement more detailed info in the Job report for the Bacula version
1987 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
1989 ebl Add bbatch tool to bench database and insert mode.
1990 Fix sql quote stuff in batch mode
1991 Fix sql stuff for mysql
1993 kes Correct problems with am/pm scheduling. Fixes bug #808.
1994 kes Implement new prunning code that prunes up to 1000 jobs at
1995 the same time. The same technique can be applied to a number
1996 of other prune/purge subroutines.
1997 kes Add an insanity check when starting a new tape job to ensure
1998 that the tape position has not been changed. If so fail the
2000 kes Fix Win32 build for dlls to add the folllowing:
2001 src/lib/bsock.c -- new file with new entry points
2002 src/lib/dlist.c -- new entry points
2003 src/cats/sql_create.c -- new entry point
2004 src/cats/sql_cmds.c -- new DATA item exported
2006 ebl batch mode cleanup bscan-test is ok now.
2007 kes Implement SD code to check length of disk volume before appending.
2009 kes Correct return status on db_batch... routines.
2010 kes Add call to db_write_batch_file_records() to migration code.
2011 ebl Fix AfterJob timing
2012 kes Move the checking of the database in initializion of the Director
2013 to after we drop privileges. This avoids the need for both root
2014 and bacula access to the DB.
2015 kes Correct a misplaced variable definition in src/filed/backup.c
2016 kes Correct how the new batch insert db_create_attributes_record()
2017 uses the arguments. Caused a seg fault in bscan.
2018 kes Implement lock() and unlock() methods in DEVICE class.
2019 Implement block() and set_block(xx) methods in DEVICE class.
2020 kes Modify bnet_connect() so that it uses time() to check for the
2021 wait time expiring (on some OSes, some system calls may not
2022 return immediately).
2023 kes Modify Verify to obtain the previous JobId when it is actually
2024 running rather than at schedule time (as it was in 1.38.x).
2025 kes Fix src/job.c to handle MaxWaitTime correctly. This should
2027 kes When checking pid in pid file, continue running if the pid is
2028 the same as ours. This occurs on IRIX after a system crash.
2031 kes Extend new GUI API.
2032 kes Make the ua structure a class, and implement send_msg(),
2033 error_msg(), warning_msg(), and info_msg().
2035 kes Apply fix from for building wx-console on the Mac from
2037 kes Implement new select mechanism for GUI programs.
2038 kes Reorganize initialization of stackedWidgets in bat.
2040 kes Add updated nagios plugin supplied by Christian Masopust.
2042 kes More bat implementation.
2043 kes File migrate bug with Pool Occupancy using mediaid instead
2044 of jobids. Fixes bug #795.
2045 kes Fix orphaned buffers in filed backup and verify due to
2046 crypto buffers not freed during errors. Fixes bug #789.
2047 kes Extend new GUI api code to tree commands.
2048 kes Ensure that tree and dot commands check console ACLs.
2049 kes Permit marking directory with trailing slash.
2050 kes Allow 20 console connections (instead of only 10).
2052 kes Add smartctl call to bacula-sd.conf as an example of getting
2055 kes Modify jobq.c to let simultaneous restore jobs run. This may
2056 cause them to fail if they cannot get a drive.
2057 kes Add Client Connect Wait to Storage daemon to permit users to
2058 modify the time the SD waits for a FD connection.
2060 kes Correct virtual changer check which was backwards. This caused
2061 volumes to be unloaded into slots already occupied.
2063 kes Apply Command ACL filter to JobId list in restore command.
2064 kes Correct typeo in var.c patch.
2066 kes Don't let Bacula prune File or Job records for the current Job.
2067 kes Fix variable substitution pad + inc bug reported (with patch)
2070 kes Correct SQLite log table index as reported by Luca Berra.
2072 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
2074 kes Begin implementing new comm signals for API.
2075 kes Fix a few places in lib/message.c where the open fd may
2077 kes Continue implementing lib/bsock.c (real class). Make jcr,
2078 who, host, and port private. There are new methods to access
2079 them for non-class use. This required touching a number of files.
2081 kes Add LANG=C to autoconf/randpass so it works with languages other
2082 than English. Fixes bug #788.
2084 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
2086 You will not be able to generate Include/Exclude list any more.
2087 It will be fixed soon.
2088 If you want to use this, you can apply
2089 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
2091 kes Restore of sockets created false error messages because Bacula
2092 no longer restores sockets, but the code was still trying to
2093 set the attributes on a non-existent file. Reported by a user.
2094 ebl finish RecyclePool feature
2095 Media will takes Pool.RecyclePool
2096 when moving from Scratch to a Pool or when user will do
2097 update volume=xxx frompool
2098 To use it, add RecyclePool = aPool to your Pool resource
2101 RecyclePool = Scratch
2105 kes Expand new BSOCK class adding signal() and new BNET signals.
2106 kes Begin enhancing the dot commands adding a new API function
2107 that returns more information and will make it easier
2108 to interface to the Director from a program.
2110 kes Make DEVICE fd private. Its new name is m_fd, and can be
2111 obtained with dev->fd() outside the class. This is the
2112 first of many DEVICE members to be made private.
2113 kes Implement Michael Renner's idea on having a virtual disk
2114 changer. I made some minor modifications (e.g. I did not
2115 implement the Virtual Changer directive, but simply set
2116 the Changer Command to an empty string.
2118 kes Implement a BSOCK send() method that writes the whole record
2119 in a single write() request rather than in two.
2120 ebl add update volume=xxx recyclepool=yyyy
2121 volume takes recyclepool from pool when using update volume=xxx from pool
2123 kes Fix encryption deblocking bug, which caused some restored files
2124 to be truncated. This fixes bug #763.
2125 kes Add FD event sequence order prepared by Eric -- for RunScripts.
2126 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
2128 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
2129 ebl Use btime_t instead of uint64_t in media patch.
2131 kes Optimize the use of the database a bit in the Status dir command.
2132 Only open it when needed, ensure that if any previous database
2133 was opened, it is closed.
2135 kes Correct VolCatBytes bug from media patch.
2136 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
2137 in the case of orphaned records.
2138 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
2139 and File records in 300K chunks to be more efficient. This
2140 idea came from Juan Luis Frances (if I remember right).
2141 kes Apply Eric's scratch patch that moves a purged Volume to
2142 the RecyclePool. Question: how is RecyclePool set? what
2143 happens to the ScratchPool?
2144 kes Apply Eric's media patch that collects read/write media
2145 times as well as byte counts. This patch requires a
2146 simultaneous upgrade of the DIR and SD. Note, there
2147 should be some way to turn off timing. I'm not sure
2148 times are in Bacula units.
2149 kes Apply Eric's batch-insert patch.
2151 kes Update projects list.
2153 kes Implement Include/Exclude file lists in FD as dlists using
2154 the new dlistString class. This permits efficiently having
2155 large include/exclude lists and completes project Item 25.
2156 kes Fix dird/ua_cmds.c so that a cancel command checks if the
2157 console is authorized to cancel the job. This fixes bug
2159 kes Modify SD so that the VolCatJobs medium record is updated
2160 at the beginning of a Job rather than the end. This
2161 fixes bug #775 where exceeding MaxVolJobs caused jobs
2163 kes Added a mutex around getting and setting Volume information
2164 so that multiple simultaneous jobs will single thread.
2166 Switch to using Subversion
2167 kes Remove src/pygtk-console/ from configure
2169 kes Delete src/lib/btree.c from win32 build, then add rblist.c
2170 plus the entrypoints.
2171 kes Apply patch supplied that corrects debug print
2172 in canceling jobs for max run time. Supplied as
2173 part of bug #621, which was previously fixed.
2175 kes Test on job_canceled() and sd_msg_thread_done inside
2176 loop starting the message thread to avoid a race condition.
2178 kes Remove rl_catch_signal from console.c as it conflicted
2179 with the header definition. Fixes bug #765.
2180 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
2182 kes Clarify some stored/acquire messages to indicate if the
2183 problem is with read or append.
2185 kes Fix memory leak with storage ids in cats/sql_get.c
2186 kes Terminate watchdog earlier to avoid reference to released
2187 memory -- reported by Jason Austin.
2188 kes Move closing the database from jobq.c to the director daemon
2189 termination routine. This fixes memory leaks for shadow jobs
2190 (i.e. migration jobs).
2191 kes Free up the unique jobid chain items in migrate.c. This fixes
2192 a memory leak problem.
2193 kes Convert some ugly looking for statements to use foreach_alist
2194 in findlib/find.c. This will facilitate converting the structures
2195 to use dlist (for large include/exclude lists).
2196 kes Fix a bug in the btree.c and btree.h routines, then rename them
2197 rblist and add them to be built in src/lib. Include some new
2198 methods written by Rudolf Cejka that make the code more readable
2199 (hides some of the ugly casting).
2200 kes Add set_next() and set_prev() methods which make the code much more
2201 readable. Also add a new dlistString class that facilitates storing
2202 strings in dlists. To be used in the large include/exclude lists.
2203 kes Make some trivial modifications to lib/tree.h that use rblist
2204 rather than dlist for storing the tree links. This was suggested
2205 by Rudolf Cejka. The result of this is that the restore tree now
2206 uses red-black binary trees rather than simple linked lists. This
2207 should give rather dramatic speed improvements for directories
2208 contining large numbers of directories/files (more than 10000).
2210 kes Fix maxruntime bug #621.
2212 ebl Implement the include JobID in spool file name project.
2213 kes Reorder projects file in order determined by Jan 2007 vote.
2214 kes Implement item #12 on project list -- quick release of FD by
2216 kes Fix open of SQLite3 db where user does not have write permission
2217 so that DIR does not crash. Fixes bug #761.
2219 kes Add back missing @ in Win32 Makefile.
2220 kes Change 'Device not configured to autolabel' from INFO
2222 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
2223 which should restart an indefinite # of times.
2224 kes Fix configure --help to print --with-mysql[=DIR]. Same for
2225 other DIR specifications.
2227 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
2228 Fix path quoting in SQLite scripts.
2229 Fix problems with SHGetFolderPath.
2231 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
2233 kes Fix Job restart on error bug that promotes an Inc to a Full
2234 backup. This should fix bug #755.
2235 kes Add qt-console and first cut of code.
2239 kes Fix Bacula->Documentation link on Win32 to point to index.html
2240 instead of bacula.html. Fixed bug #750.
2241 kes Return JobId in db_get_job_record() when JobId==0. This should
2243 kes Do not release source pointers when restarting a failed job.
2245 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
2246 This *should* fix bug #747.
2247 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
2250 kes Modify USTORE constructor to set an empty store_source string,
2251 and don't copy the store_source string in a cancel. Hopefully
2252 this will fix Arno's seg fault, bug #744.
2253 kes Add back code to disable conio in configure. Fixes bug #743.
2254 kes Correct the Options scanner in the FD to correctly handle
2255 SHA1 option, which was eating the next option. Reported by
2257 kes Add code to indicate when the SD is spooling, spool wait, and
2258 despooling as requested by Alan Brown.
2260 Version 2.0.0 released: 4 January 2007