1 Technical notes on version 2.5
6 command separator in console (!$%&'()*+,-/:;<>?[]^`{|}~)
7 examples/database/dbcheck.sql
10 dbdriver in bacula-dir.conf
12 enhancement to wait command: wait mount ...
16 filepattern (restore with regex in bsr)
18 remove reader/writer in FOPTS????
22 kes Ensure that job report is always printed even if job is failed
24 kes Don't print job report twice for failed VBackup jobs.
26 kes Fix editing of retention time difference to use 64 bit
27 int instead of 64 bit unsigned. This should permit very
28 long retention periods.
29 kes Implement code to prohibit a write job from appending to a
30 Volume that will be used for a read operation. This is
31 new code and could possibly cause some conflicts.
33 kes Integrate James Harper's Exchange Win32 plugin patch.
34 kes Apply patch from Marco van Wieringen that implements the new
35 Solaris libsec interface for ACLs so that Bacula can save and
36 restore both the new ACLs and old ACLs.
37 kes Marco's patch also corrects the file dependency generation code
38 so that it works properly both with shared libraries and static
40 kes Marco's patch also includes a small cleanup of the cats Makefile
41 to remove some references to non-existent files.
43 kes Modify win32 Makefiles to use full paths in most cases.
44 In particular add MAINDIR environment variable that points
45 to the main Bacula source directory.
47 kes Add read volume list code to SD -- not yet used.
48 kes Add James' binutils patch
49 kes Split volume management code out of src/stored/reserve.c into
51 kes Modify configure to do an automatic make clean. This ensures
52 that any changes to ./configure options are handled correctly.
54 Beta version 2.5.16 release:
56 ebl Rename JobStat table to JobHistory
57 kes Ensure that only normally terminated jobs are migrated.
59 kes Add Makefile dependency when using LIBTOOL_LINK so that any
60 change in ./configure options will be accounted for.
62 kes Fix typo in the ACL patch that I overlooked.
63 kes Apply Marco's libtool include patch.
65 kes Apply Bastian Friedrich's ACL patch to eliminate ACL
66 errors during restore.
67 kes Minor cleanup of create_restore_volume_list() code.
68 kes Fix typo in console Makefile.in
70 ebl Fix #1110 about RunScript that can't execute a script with
71 Unicode caracters in the path.
73 kes Apply tray-monitor patch from Bastian Friedrich to make it
76 kes Apply cleanup patch from Marco
77 kes Apply patch from Marco van Wieringen <mvw@planets.elm.net>
78 that implements libtool to create shared objects out of
80 kes Fix tray-monitor so it will speak to new FD.
81 ebl Fix bug with ansi label when volume name length < 6
82 ebl Fix segfault in debug level > 50 with btape.
83 ebl Remove warning message in btape when command is empty.
84 kes Fix Win32 build to pull in new BACULA define.
86 kes Change IncludeDir to Exclude Dir Containing.
87 kes Implement code to prohibit ExcludeDirContaining in an
88 Exclude section (same for Plugin and Options). A bit
89 of a kludge with RES_ITEM2 ...
90 ebl Add field to command list to restrict Runscript console
92 ebl Use a separate JCR when running Console command with Runscript.
93 ebl Permit to mark version as Beta in some ouputs
95 kes Add plugin types in jcr.h to reduce need to cast.
96 kes Do better checking of plugin return values.
97 kes Free plugin context after calling pluginFree() as
99 kes Allow plugin to call JobMessage with NULL context.
100 kes Do not add plugin to global list if loadPlugin returns error.
101 kes Rework plugin.h a bit to reduce dependence on Bacula.
103 kes Move generation of bsr file for Virtual Backup to run section
104 so that it is generated just before actually running.
105 Suggested by Graham Keeling.
107 kes Add malloc and free Bacula entry points for plugins. Increment
108 FD plugin interface version. Create a bacula plugin context
109 structure to keep track of whether or not the plugin is disabled.
110 kes Apply FileIndex fix for plugin name stream suggested by James.
111 kes List plugins in FD status report when debug > 0.
113 ebl Add a new VerId variable that is printed in version command.
114 kes Fix migration SQL not to migrate a job that has not terminated.
115 This is a partial fix to bug #1164.
116 kes Sort JobIds returned from db_accurate_get_jobids() to fix Virtual
117 backup start time bug reported by Graham Keeling.
119 ebl Fix possible bug in cancel_job() with job that are not
122 kes Fix bat build for Win32.
124 kes Copy plugin link field into ffpkt.
126 kes Integrate patch from Kjetil Torgrim Homme <kjetilho@linpro.no>
127 It provides FileRegex in bsr files and code to collect regex
128 from the user during restore, an Allow Mixed Priorities feature,
129 and documentation for the above.
130 ebl Remove db berkeley from configure process
131 kes Do dirty check on hostname (Linux only) and if not resolvable
132 use localhost as default.
133 kes Increase vtape max block to 20GB.
135 kes Refactor restore code to create a close_previous_stream(). This
136 This may destabilize the source.
137 kes Implement planned startRestoreFile() plugin call.
138 ebl Remove missing Loaded information from status slots storage command.
139 ebl Fix Console command problem that cancels the job
140 kes Add more plugin restore debug code.
142 kes Fix plugin_bwrite - plugin-blseek mixup pointed out by James.
143 kes Rewrite plugin restore interface a bit to correspond to how Bacula
144 creates and writes to the restored file.
145 kes Add some DebugMessage() calls to the bpipe-fd.c program.
147 kes Apply Marco van Wieringen's set of patches, cleans up Migration/Copy
148 Implement 'Pool Uncopied Jobs', allow Solaris Compiler to build
149 Bat; allow add and delete in place of mark and unmark.
150 kes Another attempt to fix the endRestoreFile plugin bug noted below.
152 kes Apply dbi driver patch from Joao.
153 kes Correct a bug in passing the context to the endRestoreFile() plugin command.
154 Bastien Friedrich reported the bug.
155 kes Create plugin instance only when FD job starts.
156 kes Add new FD plugin event: bEventCancelCommand when
157 a cancel command is issued to the FD.
159 kes Add cmd_plugin flag to jcr so we can globally know if a
160 command plugin is running.
161 kes If command plugin running, do not attempt (for the moment)
162 to get Win32 extended attributes.
163 kes Ensure that proper Win32 flags are set in bfile packet
164 if plugin_bopen() works on Win32.
165 kes Remove generated src/plugins/fd/Makefile
167 kes Implement build and install of bpipe-fd.so plugin.
168 kes Rework the interface that passes packets to the plugin
169 so that the packet is started and ended by the packet size.
170 This allows the driver to do a sanity check.
172 kes Rework the pluginIO Bacula internal code to enable
173 proper handling of Win32 error codes from GetLastError.
174 kes Apply Joao's patch to regress startover_libdbi.
176 ebl Add -B option to dbcheck to get catalog information
177 kes Fix Win32 build to include new library function.
178 kes Remove some old reader/writer code.
179 kes Implement ./configure --with-plugindir=xxx
180 ebl Fix the mysql bug in the new accurate code
181 kes Improve plugin debug. Create plugin test.
182 kes Set main thread specific data to INVALID because it
183 has no jcr. This allows debug output to work correctly.
184 kes Add src/plugins/fd/Makefile to ./configure process.
185 kes Make first cut attempt to correct SQL that computes the current
186 Pool usage. This is to fix bug #1159.
187 kes Do a bunch of plugin cleanups for Win32 and more careful checking
188 of PluginDirectory and whether or not a plugin was found.
190 kes This code should fix the race condition that leads to a Director
191 crash at job end time when the job list is updated. This was reported
193 kes Add more plugin documentation and fix include of config.h for
194 Win32 build (I hope).
196 ebl Revert to htable instead of rblist
197 ebl Cleanup accurate code (remove tcdbm parts) and use red/black
198 tree instead of htable.
199 ebl Use a dedicate DB link to compute and send the accurate list
202 kes Fix compile errors in filed/fd_plugin.c.
204 kes Remove all double quotes from SQLite creating script and
205 replace by single quotes as suggested by John Huttley.
207 kes Apply dbcheck patch from Yuri Timofeev <tim4dev@gmail.com>.
208 It significantly improves the performance of dbcheck for
210 kes Fix bad debug code call in src/filed/accurate.c
212 kes Change two Jmsgs in accurate to Dmsg to reduce unnecessary
213 output. Perhaps we really need to implement M_SAVED.
215 kes Fix bug #1156 FD crash during processing of Accurate data.
216 kes Tweaks to htable code to improved debugging and make names
217 a bit more meaningful.
219 ebl Remove time_t from update_stats()
221 kes Modify the license of the example plugin program to allow
222 it to be used by anyone for making a Bacula plugin.
223 kes Make apply_rp_codes() in bpipe-fd.c be static.
225 kes Remove Encryption and Accurate lines in vbackup output -- not used.
226 kes Fix subtle bug in vbackup by not changing DEV_RECORD packet.
227 kes Add host name to items printed during dump.
228 kes Make Check File Changes default on.
230 kes Set the default FD timeout to 3 minutes (previously 30).
231 kes Apply Bastian Friedrich's weird spelling correction patch.
233 kes Always print Verify hash differences. Rename variable to make the
234 code slightly more readable.
236 kes Correct tests for MaxFullInterval as reported by
237 Ulrich Leodolter <ulrich.leodolter@obvsg.at>..
238 kes Fix MaxDiffInterval code as well.
239 kes Enable Win32 plugin load code in lib.
240 kes Make Verify code that computes disk checksums use the same
241 algorithm as backup when dealing with sparse files.
242 kes Attempt to run VSS on any systems newer than Vista -- should
243 make it work on Windows Server 2008.
244 ebl Change the new statistic implementation. Remove the UseStatistic
245 directive and add a 'update stats [days=...]' command. You can
246 now decide when copy job records from Job table to JobStat.
247 Statistics are much more accurate with this.
249 kes Fix SQL case problem that may cause the failure of DiskToCatalog
251 kes First cut adding SD plugins.
253 kes Add Slot if it is non-zero to writing bsr file after a
255 kes Change a number of bnet_fsend() into class method calls.
256 kes Begin audit of diff of 2.4 branch to trunk code.
258 ebl Fix the mysql creation script that double-created an
259 index of the same field on the Media table.
260 Add an index to on VolumeName to the Media table for mysql.
262 kes Another try at fixing Vbackup. It looks much better this time.
263 Disable file index sanity check in FD with value stored in
264 attributes record because with Vbackup the File Index gets
265 changed, but not the attributes record.
266 Enhance some debug code.
267 Fix handling of re-indexing records that are copied in Vbackup.
269 kes Made level_to_str() know about Virtual backup.
270 kes Set correct Virtual backup write pool.
271 kes Fix compile warning in new dbcheck port code.
272 kes Fix migration code broken by previous virtual backup fix.
274 kes Fix problem of Virtual backup not writing a sequential FileIndex.
275 kes Reset Virtual backup time/date to the value from the last backup.
276 kes Ensure that storage name is passed to SD on read.
277 kes Correct a problem with Level and Virtual backup, rework how
278 bsrs are printed in debug to use standard routine.
279 kes Apply patch from Chris in bug #1133 that provides alternate db port
281 ebl Remove catalog dependency from bcopy tool.
282 ebl Modify catalog scripts to have an easier packaging integration,
283 using default variables.
284 Make difference between SQLite3 and SQLite in db_get_type()
286 kes Apply most of changes in a patch from:
287 Michael Stapelberg <michael+bacula@stapelberg.de>
288 that allow the Bacula FD to compile on IRIX 6.5.
290 kes Apply patch from Bastian Friedrich that accepts a yes on a
291 delete volume command line.
292 kes Attempt to fix bug #1128 InChanger flag cleared during Migration
293 job when reading from one autochanger and writing to another.
294 kes Minor tweaks (copyright dates convert to use method instead of bnet).
296 kes Fix NULL Volume error when reading (or Migration or VBackup) must switch
297 drives when no tape is mounted.
299 kes Add additional info to some SD messages.
300 kes Add fix supplied by Martin Simmons for turning off EOL character
301 in new console multi-command code.
303 kes Fix a Verify InitCatalog problem where in certain cases
304 a garbage filename may be entered in the verification database. This
307 kes Add VSS 64 bit dll entry point in src/win32/filed/vss_generic.cpp
308 sent in by Riyas Yoosuf.
310 kes Fix seg fault in Dir during estimate command with no level value
311 given. This fixes bug #1140.
313 kes Add message to migration job when the target job is already migrated.
314 This closes bug #1129.
317 kes Raise some restore debug levels.
318 kes Replace off_t by boffset_t where ever I found it.
320 kes Define a machine dependent ioctl request type for use with
323 kes When a migration job actually runs, re-check the Job record
324 and skip if the job is already migrated. This should
325 significantly reduce the problems with bug #1129.
327 kes Set MALLOC_CHECK_=0 in environment before starting Bacula to
328 turn off glibc checks that prevent getting good dumps.
329 kes Implement console 'wait mount' command. Doesn't yet work.
330 kes Implement timeout=nn on console 'wait mount timeout=nn' command.
331 kes Break the do_swapping into do_unload, do_swapping, and
332 do_load. It is much more logical that way.
333 kes Implement a set_dcr_from_vol subroutine in acquire.c for
334 reading volumes. This allows the dcr to be refreshed after being
335 zapped when the wrong volume is mounted.
336 This should fix bug #1126 -- During multiple tape restore, bacula
337 does not ask for physical tape change, but rereads same tape
339 kes Apply patch submitted for bug #1107 with a small modification.
340 This fixes a bug where bcopy copied too many records.
341 kes Make some tweaks to bsmtp based on patch submitted in bug #1124.
342 This fixes bug #1124.
343 kes Make the default bat restore Pool be Any. This fixes bug #1118.
345 kes Remove debug statement that crashes the SD at the end of
346 a tape during restore. Fixes bug #1125.
348 kes Implement Win32 bat changes made to Branch-2.4
350 kes Tweak separator command in console to start disabled and
351 allow defining no separator character. Also make code a
352 bit more fault tolerant.
353 kes Make btraceback write the traceback to the working directory
354 before attempting to mail it.
355 kes Add a RFC to Projects.
357 kes Attempt to implement a kludge to make Qt work with bat
359 kes Setup rstorage correctly. Virtual backups are working.
361 kes Move setting JobLevel and JobType into a method, which should
362 allow completing Virtual Backups.
363 kes Fix verify jobs to work again.
365 kes Virtual Backup tweaks -- it is close to working.
367 kes Ensure that SD tried to mount a volume not in an autochanger
368 at least once before asking for operator intervention.
369 kes Make SD aware of Virtual Backup jobs.
370 kes Add VirtualFull for bat.
371 kes Changes to get read storage correct for Virtual Backup.
373 kes Remove old code from label.c
374 kes Split display_display_info() out of write_bsr_file()
375 kes do_vbackup_init() working -- i.e. bootstrap file built.
376 kes Change Bacula trademark owner from John Walker to Kern Sibbald
377 kes First non-working cut of vbackup
378 kes Correct FD heartbeat code to use volatile variable accessed by
380 kes Zero thread id with memset if on Win32 in case it is a struct.
381 kes If cannot create JobMedia record, continue to try to write eof
382 and clean up in block.c
384 kes Add code to interface OpenSSL to new Win32 pthreads code which
385 used a structure for thread_t.
387 ebl tweak bat for win32 compilation
389 ebl Remove tokyo cabinet from the source
390 ebl Update configure/autoconf to support berkeley DB
391 ebl Add a sort to db_get_file_list() to improve bsr construction time.
393 kes Add a mtx-changer.conf file that is not overwritten during
394 an upgrade. It fully configures the mtx-changer script.
395 kes Clear in-use bit on vol when unused while swapping.
397 kes Remove sleep at end of ./bacula
398 kes Clear hash packet for hardlinked files correctly. This corrects
399 a long standing bug where hardlinked files selected individually
400 would occasionally not be restored.
402 kes Apply Eric's patch to ensure that autoprune does not return
403 a Volume not in the autochanger unless requested to do so.
404 kes Correct bat restore display of multiple drives. This fixes
406 kes Do find_a_volume() each time an unload is done. This
407 fixes the failure of maxvol2-test.
409 kes Add some SD debug code.
410 kes Do find_a_volume() each time an unload is done.
411 kes Apply Joao's DBI patch that adds easier configuration of DBI drivers,
412 and adds --with-db-port to ./configure.
413 kes Use Qmsg() in job.c watchdog callback.
415 kes Release main control rwlock if ABORTing.
416 kes Make watchdog connect timeout queue messages rather than sending
417 directly to avoid lock conflicts with the real thread.
418 kes Add const char in dbd.c to avoid compiler warnings.
419 kes Fix python compiler string warning. Note, IMO the GNU C++
420 compiler guys have made a *very* bad change to their compiler.
421 They now force all strings to be 'const' unless you explicitly
422 cast them, which is extremely ugly and ruins nice code as well
423 as creates a lot of useless work.
425 kes Fix mtx-changer to detect both versions of Ubuntu (Debian)
426 mt. This fixes bug #1116.
427 kes Add const in python files to reduce compiler warnings.
428 This may have to be backed out because of later compiler
430 kes Fix failure of 2drive-concurrent-test. Always read label;
431 clear_unload() only after drive is defined in acquire_for_read().
433 kes Generally clean up the manual tape loading code. The main
434 conceptual change is that when a volume is marked to be unloaded,
435 its volume name is retained, and it is only marked as unloaded
436 when either the autoloader says it is unloaded or another tape
437 is read on that drive.
439 kes Add debug code and refactor subroutine in stored/mount.c
440 kes Fix format problem in bscan output reported in bug #1105.
441 ebl Fix get_next_volume_for_append logic with autochanger
442 - use pruned volumes if found
443 - don't reset the inchanger flag after getting a recycled volume
445 Fix recycle_oldest_purged_volume to take InChanger flag in account
447 ebl Add mmap/unmmap implementation for tokyodbm under win32
449 kes Make first step toward eliminating globals from config
450 scanning. Also should be a workaround for FORTIFY_SOURCE
451 GNU C bug -- fixes bug #1042.
453 kes Apply duplicate job tests to restarted jobs.
454 kes Copy more data when restarting a job so that run
455 overrides are kept. This should fix bug #1094.
457 kes More word alignment cleanup.
458 kes Fix bug where SD did not ask operator if the device could not
459 be opened. Reported by Eric.
461 kes Add dbuser to DIR conf file (replaces user).
462 kes Add --with-db-password to ./configure
463 kes Fix regress to handle db_password.
464 ebl Add new 'status storage slots' that list autochanger
466 ebl Update vtape driver to compile only under Linux.
467 ebl Fix a bug when restoring with a wrong mediatype.
469 kes Eliminate ints from conf files and structures to avoid
470 word alignment problems
472 kes Fix bug reported by Scott Barninger where the bacula script
473 refers to scripts in the wrong directory. Needed to meet the
474 requirements of recent FHS location changes.
475 ebl Disable vtape for FreeBSD.
477 ebl Modify disk-changer to check if slot contains something before
480 ebl Fix vtape on win32 and debian.
481 ebl Fix autoselect patch (cause segfault).
483 ebl Fix autoselect option broken for a while. Fix #1089. Need some
484 work with StorageId to be able to use a particular drive in a
487 ebl Rename vtape to vtape.
488 ebl Update vtape driver.
490 ebl Modify vtape driver to avoid sparse file.
491 kes Add make clean of qt-source directory during ./configure
492 kes Store last block number written to tape in DEVICE and
493 use it for testing for correct last block on EOT.
495 Release Version 2.4.0:
499 kes Make sure to clear JS_WaitMedia when operator mounts a Volume.
500 This fixes bug #1095.
502 kes Add create_postgresql_database.sql to Win32 installer. Should
503 fix problem reported by Juilio Monteiro.
504 kes Get correct slot when auto unloading a device. This fixes bug
507 kes Fix multiple media restore.
508 kes Make DEVICE Slot private and access it via a method.
509 Allows better control over when it is set and cleared.
510 kes Fix possible seg fault if SQL error.
512 kes Add Martin's fixes to argument scanning for the estimate
513 command. This fixes bug #1093.
514 kes Add debug code to SD.
515 kes Fix renaming a Volume, which used the wrong Volume name.
517 kes If operator has rewind tape, print warning, release tape and
518 try once more. If tape is positioned somewhere, something went
519 wrong, so mark the tape in error and try once more. Previously
520 this error was fatal, now it produces an error message.
521 kes Ensure correct volume name displayed during restore
522 kes Ensure that Volume is mounted for restore.
524 kes Fix a few more Coverity reported problems.
526 kes Apply Allan Black's status dir job count patch.
527 ebl Add information about IMPORT/EXPORT slots in mtx-script.
528 kes Enhance a couple of SD debug messages.
529 kes Tweak unload flag setting and ensure it is set during swap.
531 ebl Fix #1091 about bad output in estimate command.
533 kes Modify autochanger locking to attempt to avoid race
535 kes Make sure device not busy before doing label command.
536 kes Display open() errors except when polling. Previously too
537 many were suppressed. This should fix bug #1070.
538 kes Fix Win32 reparse points. Bacula will not recurse into any
539 reparse point directory, including mount points, unless the
540 directory is explicitly mentioned at the top level (same as
541 with Unix). A file that is linked to another file will be
542 backed up -- much as Unix does for hardlinked files.
543 This fixes bug #1041.
545 kes Remove double quotes from ChangeLog and ReleaseNotes
546 kes Remove StorageId test when pruning and recycling (Eric's changes).
547 kes Remove old form of locking when getting volumes -- causes deadlock.
548 kes Change bat dirstat layoutWidget to dirstatlayoutWidget to make
549 the name unique and to eliminate compile time error.
550 kes Add accurate.o to Win32 FD Makefile
552 kes Fix cats dll build on Win32 after db_update_job_end_record
553 calling sequence change.
554 ebl Switch to tokyo dbm instead of htable in accurate code
555 ebl Include tokyo dbm to bacula source tree
557 kes Fix buffer overruns detected by Coverity.
559 kes Tweak joblog display.
561 kes Implement --without-qwt
562 kes Fix layout of restore tree dialog
563 kes Add configure bat QWT libraries, so that bat can be built
564 with or without the QWT libaries.
566 ebl Add dummy tape driver for regression tests.
567 kes Make sure we unload the right slot when swapping.
569 kes Add debug times, reduce size of two-pool-changer test
571 ebl Tweak autoconf scripts for vtape
573 kes Improve SD reserve debug code.
574 kes Testing an improvement to free up volumes no longer in use.
576 kes Rework SD acquire for read to handle autochanger Volume
578 kes Implement regression that explicitly tests swapping a Volume
579 from one drive to another.
580 kes Enhance disk-changer to detect most error conditions.
581 kes Fix SD code so that it properly swaps a Volume between drives.
582 This fixes bug #1083.
584 kes Apply libdbi patch from Joao Freitas for regress and for
585 Bacula trunk. Regress now works with libdbi. Nice.
586 kes Apply .nobackup patch from bug #1077 submitted by
588 kes Apply Bastian Friedrich's patch that adds %p to edit the pool
589 name into jobs cloned via the run directive.
591 kes Prevent a Volume that is being swapped from being freed from
592 the volume list. This will most likely fix, at least partially,
594 kes Fix strippath so that it does not get a buffer overrun and crash FD.
595 This fixes bug #1078.
596 kes Remove 50 millisec wait in SD that broke debugger.
597 ebl Add MaxRunSchedTime option that specifies the maximum allowed time
598 that a job may run, counted from when the job was scheduled.
599 ebl Fix MaxWaitTime option that specifies the maximum allowed time that
600 a job may block waiting for a resource, counted from when the job starts
601 ebl Rename (add) Max(Incr|Diff|Full)WaitTime to Max(Incr|Diff|Full)RunTime
602 kes Apply patch from bug #1076 by Tullio Andreatta <t.andreatta@troppoavanti.it>
603 that implements multiple commands per line in the console when using
604 readline. Modify the default to use a semicolon as the command separator.
606 ebl Fix SQL query in migration code.
607 ebl Make accurate mode with hash disk pass regression tests
609 ebl Implement first cut of accurate backup with hash disk.
611 kes Force unload of volume when wrong volume mounted in SD.
613 kes Fix bat seg fault at termination.
614 kes Add Bacula generated version to bat about box.
617 kes Experiment with allowing multiple read jobs.
618 kes Move final volume swapping code to DCR method and
619 call it from acquire_for_read().
620 kes When wrong volume is mounted during read, unload_autochanger.
622 kes Integrate the libdbi changes from Joao Henrique Freitas
624 kes Stop searching for Volumes in SD askdir if DIR returns the
625 same volume name twice in a row.
626 kes Close bat console windows first to eliminate error message
629 kes Tweak the swap Volume from one drive to another code so that
630 it now seems to work.
631 kes Resolve several problems with recycling that broke the new
632 code (these problems are in 2.2.9 as well).
633 kes Remove the volume lock when calling the sysop code.
634 kes Don't mark a reserved volume with no writers as unused otherwise
637 kes Rework class structures for VOLRES, DCR, and DEVICE to make
638 the method names a bit more logical, and for more logically
639 handling the responsibilities.
641 kes Remove redundant code in terminating the scheduler that just
642 causes a seg fault in many cases.
643 kes Cleanup releasing a volume and make it a DCR method.
644 kes Improve algorithm for detecting pre-reserved volume and
647 kes Tweak volume swapping code so it works.
648 kes Correct name overloading in mount.c
649 kes Replace released flag in VOLRES with reserved and add access
650 methods for the VOLRES class.
651 kes Prevent volume from being released while being swapped.
652 kes Apply Bastian Friedrich's edit codes patch for the bpipe-fd
653 plugin that add %w (where) and %r (replace flag) editing to
655 kes Apply Bastial Friedrich's edit pool=%p patch for run clone
657 kes Refactor parts of stored/mount.c
659 ebl Add sanity checks for VolWriteTime and VolReadTime
660 ebl Take care of bad clock changes while computing VolWriteTime
661 and VolReadTime. This should fix or limit #1066
662 kes Correct error string numbers in dird/catreq.c
663 kes Restructure reserving, acquiring, and mounting volumes. Calls to
664 autochanger are deferred for mount.c -- simplifes the code.
666 kes Do not prune any running job. It just fails the job.
667 kes Lock the volumes when changing dev->reserved_device and marking
668 the volume unused otherwise the device can get reserved by
669 another job before the volume is released, thus blocking it.
671 kes Correctly detect Ubuntu systems, and add ubuntu platform directory.
672 kes Fix bug #1063, reuse of freed ptr in list nextvol.
673 kes Release regex compile buffer in filed/job.c
674 kes Add proper type of const char in sql_create.c
675 kes Turn off debug in daemon termination routines
676 kes Move free_volume_list() before devices are freed in stored.c
677 kes Fix reference to uninitalized stack variables in bregex.c.
678 This should correct bug #1067.
680 kes Fix possible seg fault in SD when freeing a volume entry.
682 kes Implement unload_dev() before swap device.
683 ebl Add statistics prunning with option and menu
684 kes Separate unload_dev() from unload_other_device() in autochanger.c
686 kes Apply patch from bug #1069 that corrects spurious error messages
687 when ACLs enabled on SGI but no ACL exists.
688 ebl Fix small segfault in bacula-sd when debug level is 500
689 kes Modify run_program() and run_program_full_output() to use
690 call by reference for the results string. This corrects a long
691 standing problem where the address of the string may be changed
692 in the subroutine but not in the calling program.
694 kes Re-enable code to remember last volume mounted on a non-tape
696 kes Add patch supplied in bug #1068 that fixes a SD crash when using
697 a Virtual autochanger.
698 kes Generate correct JobMedia records during spooling/despooling when
699 running concurrent jobs. Thanks to Tom Ivar Helbekkmo
700 <tih@hamartun.priv.no> for excellent analysis and testing.
702 kes Tweak hash algorithm for htable using Martin Simmons idea
703 for doing a circular shift.
704 kes Remember what volume is in VTLs (previously turned off for
706 kes Analysis of JobMedia records by Tom Ivar Helbekkmo <tih@hamartun.priv.no>
707 pointed out some problems in creating JobMedia records during
708 spooling with concurrent jobs. Fix the problem by updating the
709 start file position before despooling and generate a jobmedia
710 record at the end of despooling.
712 kes Fix handling of JobMedia records during spooling and when a
713 Volume is changed without actually writing data to the Volume.
715 kes Rework certain SD locking based on gdb tracebacks of deadlocks
716 sent by Eric. This code now uses only the volume_lock() rather
717 than the reservations lock when at EOM and acquiring a new
719 kes Ensure only one exit point in several subroutines.
721 kes Implement bsock code to permit locking. Use the new code in Verify
722 in the FD to prevent the heartbeat thread from disrupting the Verify
723 data sent to the Dir.
724 kes Modify SD locking to eliminate locking the reservations system from
725 outside the system. Use the volume lock when getting media data
726 and reserving a new volume at end of media.
727 kes Add Eric's volume_unused() fix to stored.c so that Volumes found
728 when SD starts are not locked into place.
730 kes Fix error compiling runscript code on 64 bit machines.
731 kes Tweak Win32 mount point code.
732 kes Fix a couple of bugs in the accurate code (bad sscanf, buffer not
733 cleared giving bad file estimate).
734 kes Implement BIG_MALLOC in htable code. Runs 2.5 times faster for
737 kes Keep Schedule run lists in order as suggested by
740 kes Implement autostart scripts for Debian.
741 ebl Implement upgrade catalog scripts.
743 ebl Apply jobstat patch for long term statistics. Have to implement
744 purge stats command and upgrade scripts.
745 kes Fix mtx-changer.in for broken Debian mt program.
747 kes Fix large number of JobMedia records reported by Eric Bollengier.
749 kes Apply doc fix from bug #1062.
750 kes Resolve crash and improper restore wx-console Win32 restore
751 GUI. Fixes bug #1065.
752 kes Update Win32 wxWidgets to latest version.
753 kes Attempt to do correct handling of Win32 mount points. Should
755 kes Fix Win32 FD backup/restore memory leak due to improper termination
756 of BackupRead/Write. This fixes bug# 1038.
758 ebl Reduce memory usage for accurate backup, working only with ctime
759 and mtime. (not all Lstat field)
760 About 40MB for my Linux system (400.000 files)
762 kes Add dcr->reserved_volume flag that allows us to release a volume
763 even if it is not vol->released. This allows maxvol2 to work when
764 Volumes expire and we are already writing to the device (i.e. a
765 volume is pulled out from under us by another job terminating after
766 we reserve the drive).
768 ebl Permit multiple command/console per runscript definition.
769 RunScript { command = /bin/true ; command = /bin/false ... }
770 ebl Add RunsWhen = AfterVSS to runscript. You can execute a command
771 (restart an application) just after the VSS snapshot on windows.
772 kes Don't zap dcr values during release_volume() as they might
773 have the next Volume to be mounted.
774 kes Fix AIX prototype.
776 kes Second cut of drive switching during backup.
779 kes Update Win32 version of wxWidgets to most recent version.
780 kes Tweak Copy job details.
781 kes Rework dir_find_next_appendable_volume to make a bit more effort
782 to find a suitable volume before giving up.
784 kes Make ask_sysop_to_create... to return if waken from wait.
785 This helps get out of blocked conditions.
786 kes Experimental implementation of switch_device in reservations.
787 kes Implement FD version to allow easier protocol changes.
788 kes Add Plugin Options string -- not yet passed to FD.
789 kes Implement PluginOptions ACL.
791 kes Attempt to correct problems with restores with autochangers and
792 use counts going negative
793 kes Rework SD status command and implement API for bat. Implements
794 header, runing waitreservation, devices, volumes, spooling,
795 and terminated status keywords.
796 .status storage=xxx <keyword>
797 kes Clarify TLS error message by adding double quotes around name.
798 kes Simplify SD/FD status code by putting api flag in STATUS_PKT
799 kes Pass jcr to tls routines so debug messages can be handled better.
800 kes Rework jobq resource allocation code, and possibly fix a bug
801 that caused reference counts to get out of sync.
803 kes Rename fd/dir plugin to use Bacula standard underscore.
804 kes Plugin work -- bring dir up to fd level.
805 kes Start implementation of VTL code
806 kes Fix Win32 build after adding new cats subroutine.
808 kes First cut at Duplicate Job implementation.
810 kes Fix bugs in MaxFullInterval and Implement MaxDiffInterval.
811 kes Start PluginOptions string, and refactor a bit of ua_run.c
812 ebl Apply Allan patch that permit to reset recyclepool.
814 kes Test patch -- possible fix or improvement for bug #1053
815 kes Refactor FD and SD status commands to permit new API code in
816 SD, and to fix Win32 build.
817 kes Win32 build is now working.
819 kes Implement 'MaxFullInterval' and start 'MaxDiffInterval' based on
820 some ideas in patch from Scott Bailey.
821 kes Begin implementation of duplicate Job control.
822 kes Fix some of Win32 build after recent additions.
823 kes Apply patch from Frank Kardel that implements 'honor no dump flag',
824 which causes the FD to detect whether or not the OS has the
825 honor no dump bit (*BSD systems), and if so, to skip backing up
826 any file with this bit set. The feature is enabled by setting
827 'honor no dump flag = yes' in the Options section of a FileSet.
829 kes Correct po warning message with datarootdir
830 kes Implement more code in dird.c to put configuration parsing in
831 a class rather than use globals.
832 kes Restructure SD status command for implementation of bat API
835 kes Suppress incorrect 'Will not descend from x into y' messages.
836 kes Eliminate FORTIFY_CODE=2 bug, and make first cut at removing
837 daemon globals used by parser.
838 kes Apply Joao's patch to separate DB_TYPE and DB_PROG in configure.
840 kes Fix free of plugin_list when none exists.
842 ebl Apply accurate project patch.
844 ebl Fix a segfault when using strip_path option. (Use of pm_strcpy
845 on non-mempool object)
846 kes First cut of converting FD .status to work with bat API.
848 .status client=XXX header
849 .status client=XXX running
850 .status client=XXX terminated
851 kes Implement first cut of Copy Job.
852 kes Implement Catalog in Pool resource. It overrides catalog specified
853 in the Client resource.
855 kes Apply patch (with some difficulties) from Joao Henrique Freitas
856 <joaohf@gmail.com>, which adds support for libdbi as a Bacula
858 kes Add patch from Martin Schmid scm@apsag.com that checks to see if
859 ftruncate() actually works. In the case of some (cheap) NAS devices,
860 it does not, and so recycling NAS Volumes does not work. The code
861 simply unlink()s the file, then recreates it. This fixes bug #1011.
863 kes First incomplete cut of big malloc blocks for htable.
864 kes Tweak plugin code.
866 kes Plugin debug code + tweak a couple bat dialog layouts
868 kes Fix creating first JobMedia record during Migration to include
869 proper index. This caused slow restores of migrated jobs.
870 kes Temp fix to plugin name file_index.
871 kes Bacula backed up and restored a MySQL database.
873 kes Implement plugin restore.
874 kes Implement parsing of db_driver to give db_type index.
876 kes First cut of plugin restore code.
877 kes Fix bug #1047, which had a heap overrun when stripping certain paths,
878 and do not strip paths on symbolic links.
879 kes Set catalog backup database and user name from values specified on
880 the ./configure line.
881 ebl Fix #1031 about wrong pool source information in job report.
884 kes Remove a redundant jcr argument to find_files, match_files, and
886 kes Implement '.status dir header|scheduled|running|terminated' that
887 prints the requested status section. With the exception of the
888 header, the other reports have fields separated by tabs (\t).
890 kes Apply patch from Peter Much <pmc@citylink.dinoex.sub.org> that fixes
891 a resource embedded run command to find a since time if no explicit
892 since time was supplied on the command line.
893 kes Apply state-file.patch sent by Allan Black <Allan.Black@btconnect.com>
894 that updates the state file at job termination time in addition to
895 when the daemon terminates.
897 kes First version where a plugin did a backup.
898 bpipe-fd.so created a backup file, wrote a test
899 string to it, and Bacua could restore this fabricated file.
901 kes Implement DB Driver = string for the DBI driver.
902 kes Remove all old bdb_xxx.c code. Add dummy routines to bdb.c
903 kes First cut of code for loading Win32 plugin dlls. Implement
904 dlopen, dlsym, dlclose, and dlerror in src/win32/compat/compat.cpp
905 and implement a dlfcn.h file based on opengroup's definitions of
908 kes First cut plugin directives.
910 kes Apply patch from bug #1049 to prevent stripping the path on a
912 kes Attempt to fix bug #1047 where stripping a path corrupts the
913 heap. Waiting for feedback.
914 kes Correct the Mount message not to suggest labeling a new tape
915 when doing a restore. Submitted by email by John Stoffel.
916 kes Attempt to work around gcc FORTIFY_SOURCE bug that crashes the
917 FD by using casting. Reported in bug #1042.
919 kes A bit of crypto cleanup. More later.
921 Release Version 2.2.8
923 kes Apply patch from Martin to correct bug #1040, bscan sets existing
925 kes Fixed important spelling error in doc -- bug #1045.
927 ebl Fix bextract to be able to extract non-portable Win32 data to
929 kes Move initialization of read/write res lock earlier in the code.
930 This fixes the crash with a null conf file. This fixes bug
932 kes Redefine CURES in lib/parse_conf to be URES and move it all
933 into lib/parse_conf.c -- this responds to bug #1042, but does
934 not fix it. The fix is not to compile with FORTIFY_SOURCE.
935 kes Backport to 2.2.8 fix de-referencing a NULL pointer in the scanner from
936 the trunk SVN. I don't think this was reported as a bug.
938 ebl Fix a bug during tape initialization with MTSETDRVBUFFER.
940 kes Fix Win32 build with new .def files and DLL_IMP_EXP ...
942 kes Add DataDespooling and DataCommitting status (committing is
943 the last despooling).
944 kes Finish implementation of new reservations code noted below.
946 kes Fix bsnprintf for float point numbers. I broke recently when
947 parameterizing some variables. This fixes bug #1036.
948 kes Undo recent reservations changes ... will apply them later
949 when they work better.
951 ebl Fixes #1034 which cause mysql to hang the connection after 8h
952 ebl Change default statistics target of filename.name and path.path
953 fields for PostgreSQL. This speeds lookup by indexes. Thanks
955 kes A few more tweaks to new reservation code. Make sure to clear
956 vol released flag when retaking volume. When reading label and
957 label is bad mark volume unused. When recycling, mark volume
958 unused so it can be renamed.
960 kes Fix reserve_volume() so it doesn't release a volume in use
961 (i.e. a volume entry not marked released). This should be
962 the last part needed to fix bug #1018.
964 kes Move Heartbeat documentation from Job to Director resource.
965 This fixes bug #1033.
967 kes Fix existing switch drive SD code to call autochanger to release
968 any old volume. This must be done to keep the autochanger from
969 releasing subsequently newly reserved volumes in doing a close().
970 This should fix bug #1018.
971 kes Fail if attempting to get console input in batch mode. This
972 should help fail RunScript console commands that are incomplete.
973 kes First cut implementing switch_drive() in SD (not actually called).
975 kes Implement first cut running console commands in a RunScript.
977 ebl Fixes bug #1028 where 'Selection Type' option was not usable
979 ebl Fixes bug #897 and bug #1005 where bacula doesn't display runscript
982 Release Version 2.2.7
984 kes Add new free_tls() entry point so that Win32 builds.
985 kes Fix compile warning in src/lib/util.c
986 kes Fix entry point for edit_job_codes() so that Win32 builds.
987 kes Fix seg fault Frank Sweetser reports in regression testing
988 on his systems. The problem was that the original author of
989 bsnprintf.c did not take into account the side effects of
990 using ++x in the argument to a #define.
991 kes Make SD protocol backward compatible with version 2.2.x.
993 ebl Fixes bug #1015 where bacula failed to restore acl to a socket
994 because Bacula no longer restores sockets.
995 ebl Always use ignorecase fileset option on win32 FD.
997 kes Apply patch from Michael Stapelberg <michael@stapelberg.de>
998 that implements double quoting include names in conf files,
999 and also allows piping input by having the first character
1000 be a vertical bar (|).
1001 kes Apply patch from Bastian Friedrich <bastian.friedrich@collax.com>
1002 that implement %f in RunScripts to pass the FileSet name.
1003 kes Skip leading | when lex input comes from a pipe as suggested
1004 by Michael Stapelberg <michael@stapelberg.de>.
1006 kes Apply patch for bsmtp Win32 daylight savings time fix supplied by
1007 Nerijus Baliunas <nerijus@users.sourceforge.net>
1009 kes Implement Plugin Directory and plugin events.
1011 kes Implement a security enhancement: TLS authentication but no
1012 encryption. Enabled by setting 'TLS Authentication = yes'.
1013 Note when this is on, TLS encryption is turned OFF!
1015 kes This patch corrects a problem where the maximum concurrent storage
1016 jobs counter gets out of sync during restore jobs causing jobs to
1017 'wait on max Storage jobs'. This patch fixes bug #1009.
1019 kes This patch fixes bcopy so that it produces correct Volumes.
1021 kes This patch eliminates spurious output to the console during a VerifyVolume
1022 job that contains encrypted data. It fixes bug #1024.
1024 kes This patch prevents the 'status dir' command from trying to use a scratch
1025 volume and possibly moving it from one pool to another. This patch fixes
1028 kes Add new include to postgresql.c suggested by Marc Cousins so
1029 that it compiles correctly with pgre version 8.3.
1031 kes Fix --archivedir addition to configure. Replace it with
1032 --with-archivedir in configure.in This fixes the regression
1034 kes This patch fixes bug #1012 where the job is canceled because
1035 of Max Run Time exceeded when the job has not yet started.
1037 ebl Apply Richard Mortimer patch that fixes #1016 when there are more than
1038 one 'part' to write. Instead of each part being stored on disk,
1039 written to DVD, then deleted from disk, all parts are written to disk,
1040 and only the last is written and deleted from disk.
1041 kes This patch fixes the status command to include the formating string for
1042 JS_AttrInsterting. It fixes bug #1021.
1043 kes This patch should fix the Mac OS X build problem on the latest
1044 Darwin, where sys/types.h was not included correctly (apparently
1045 due to a change in the Mac headers). The solution was to explicitly
1046 ensure that it is defined for the ./configure.
1047 This patch also has a rebuild of configure that includes the Debian
1048 qt4 patch to check for qmake-qt4. This patch fixes bug #1020.
1049 kes This patch should ensure that queued messages to the console are
1050 displayed as soon as possible. It should fix bug 1007, but has been
1051 reported not to work.
1053 kes This patch fixes the infinite loop when trying to increase the
1054 maximum number of volumes in a Pool during the add command.
1055 This patch fixes bug #1008.
1057 Release Version 2.2.6
1059 db Remove extra data on estimate command in joblist for bat.
1061 kes Cleanup of code in SD that sets the LastWritten date. This doesn't
1062 really change anything, but is the beginning of doing it *right*.
1063 To do it completely right the LastWritten date must be passed to
1064 the SD, but it is not yet done.
1065 kes Minor tweaks to some bat restore SQL.
1066 kes This patch fixes bug #1003 where putting the message output from
1067 a Verify job into the catalog results in a recursive loop. The problem
1068 seems to show up only with postgresql (to be verified).
1069 kes Correct %x to %p in postgresql debug statement.
1071 kes Fix bug #942 where lots of emails where generated when the heartbeat
1072 interval was low and Bacula wanted a different tape from the one in
1075 ebl Add new SD despooling attributes and Dir inserting attributes
1076 job status codes in the catalog (Status table).
1078 ebl Use qmake-qt4 instead of qmake when available (debian system).
1080 kes Add a security warning to src/cats/make_catalog_backup.in indicating
1081 that passing the password via the command line (arg 3) is insecure.
1082 This responds to bug #990 (it doesn't fix it).
1084 kes Set default debug_level to zero. This corrects bugs #991 and #993.
1085 kes Fix a crash in bat when it cannot connect to the Director for example
1086 if the Director is not running.
1087 kes Remove redundant INDEX (JobId) from File table in the trunk.
1088 This fixes bug #992.
1089 kes Make explicit exception to GPL in LICENSE to permit linking
1090 the Win32 FD with Microsoft VSS code.
1091 kes Apply the Solaris package patch from
1092 Masopust, Christian <christian.masopust@siemens.com>
1093 kes Apply the patch to optionally add a timestamp in the debug output
1094 submitted by Mariusz Czulada <manieq@wp.eu>.
1096 ebl Use PQerrorMessage instead of PQresultErrorMessage in postgresql
1097 backend (sql_strerror). Fixes bug #989
1099 kes Apply Michael Short's <mdshort@gmail.com> Win32 regress patch.
1100 It applied with no problems.
1101 kes Add PATH command to SunOS part of mtx-changer.in so that sed and
1102 awk are on the path.
1103 kes Redirect stderror to stdin on mt status command in mtx-changer.in
1104 since the status is returned on stderr on Solaris.
1105 kes Activate Close button on tray-monitor window. This fixes
1107 kes Check for NULL item in parse_conf.c before calling it. In the
1108 case of Device, there is no item and this caused a seg fault when
1109 Device appears in the conf file.
1110 kes Add a #define __CONFIG_H when including config.h in bacula.h. This
1111 avoids pulling in config.h multiple times in some new code.
1113 kes Fix spurious warning message printed when creating a volume with
1114 a LabelFormat. This fixes bug #976.
1116 Release Version 2.2.5
1118 kes Add JobId in place of Job name in all the Jmsg() output.
1119 kes Correct the APP_DESC for the Win32 storage service (remove an e).
1121 kes Make maxvol-test and new more strict maxvol2-test work.
1122 kes Print JobId in all Jmsg() job output.
1124 kes Add new SD despooling attributes and Dir inserting attributes
1125 job status codes. This fixes bug 961.
1126 kes Fix Win32 drive display in bat version browser. Fixes bug #962.
1128 kes Fix doc issue. This fixes bug #963.
1129 kes Fix listing performance problems in bat. Pointed out by
1131 kes Remove old debug code.
1132 kes Fix bat code that tests for Win32. This should fix bug #968
1133 kes Query 5 list wrong Vol after migration. This fixes bug #960
1135 ebl Fix #969 where user can't change Replace option in restore menu.
1137 kes Save jcr in thread specific data (tsd) for each thread.
1138 kes Make Dmsg() print JobId as -%u.
1139 kes Make Jmsg, Emsg, and others automatically pickup the jobid
1140 for the thread if it exists.
1141 kes Remove old reservation debug jid code.
1142 kes Remove get_jcr_from_tid() from OpenSSL and tls code.
1143 ebl Add an option that permit to specify spool size in job
1144 definition. (Applying patches/testing/spoolsize_per_job.patch).
1145 You must upgrade SD and DIR at the same time.
1146 dvl Add new configuration item --archivedir
1147 dvl Adjust regression tests to use tmp not /tmp. This will allow
1148 multiple concurrent runs of the regression tests.
1150 kes Fix race condition that drops final block written to volume.
1151 This happens in rare cases with multiple simultaneous jobs
1152 when the Volume fills. This fixes bug #964. May be related
1153 to bug #935 and possibly #903.
1154 kes Eliminate more strerror() and replace with bstrerror().
1155 kes Remove BSD getopt and replace with unrestricted IBM version.
1156 kes Fix Win32 build for changed calling sequences.
1157 kes More tweaks to the mount volume routines to get everything
1158 right. Changed variable name from find to have_vol, which is
1159 much easier to understand.
1160 kes Enhance btimer debug code.
1162 kes Fix FD->SD authorization failure, which was due to spurious
1163 wakeups from a pthread_cond_timedwait(). Simply check the
1164 predicate before continuing. This fixes bug #953.
1165 kes Add const char where needed (more to do). Remove temp debug code.
1167 kes Setup SQLite busy handler before doing queries. Fixes bug #967.
1168 kes Don't overwrite error message in check_tables_version.
1170 kes Unlock batch insert tables with same calls used elsewhere.
1171 kes Allow starting 59 jobs a second.
1172 kes Make SD session key more random.
1173 kes Add retry for SQLite opening db if it fails. Probably helps
1175 kes Suppress extra error messages during batch insert failure.
1177 kes Add jcr to timer packets so if killed message can be sent to job.
1178 kes Add JobId to all Dmsg() output.
1179 kes Put some FD auth code on dbglvl rather than fixed.
1180 kes Return insert attributes error message in db msg buffer to avoid
1181 false error messages. Helps fix bug #966.
1182 kes Separate batch init error messages. Probably helps fix bug #966.
1183 kes Make SD code that contructs attribute insert check string lengths
1185 kes If Dir gets an error during inserting attributes, cancel SD.
1186 This reduces unnecessary error messages.
1188 kes Correct search boolean for getting Volume info
1189 ebl Cleanup batch insert code. Probably fixes bug #965.
1190 kes Back out one small change to the reservation system (reserving a volume).
1191 kes Rework how a Volume is mounted. It is now much more intelligent and
1192 will always attempt to use any mounted volume if possible and reduces
1193 calls to the Director asking about volumes.
1195 kes Turn off some code when batch insert not enabled.
1196 kes Edit FD name in connect error messages.
1197 kes Rework the reservation system to take into account that the Director
1198 might give us a Volume that is different from the current one being
1199 used, and to ensure that we don't exceed Maximum Volume Jobs.
1200 This fixes (mostly) bug #947 ' Maximum Volume Jobs = 1 produces
1201 fatal error with multiple jobs running'
1202 kes Add more debug code in reservation system.
1203 kes Implement maxvol-test to check bug #947.
1205 kes Add code to handle tray monitor separated from Win32 FD.
1206 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
1208 kes Add missed return in fixing verify bug -- trunk only.
1209 ebl Fix a command parser issue causing a director segfault.
1210 kes Fix ANSI tape labeling. Fix restoring ANSI labeled Volumes.
1211 This fixes bug #954.
1212 kes Increase the max block size to 4MB fixes bug #957.
1213 kes ERABT if user sets min block size > max block size. Fixes bug #956.
1214 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
1215 is not properly mounted (recognized) during a poll.
1216 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
1217 Job that has differences reports Verify OK.
1218 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
1220 ebl Add an option to operate on all pools with update vol parameters.
1221 This complete the project 20. Patch from Nigel Stepp.
1222 ebl Add history support to bconsole when using readline.
1223 Using Ctrl-D to exit doesn't update .bconsole_history
1224 kes Modify new volume algorithm to use max MediaId for generating next
1225 volume number rather than the count of Volumes. This should essentially
1226 eliminate the failure rate if some volumes were deleted. Bug #921.
1227 kes Begin implemention of Optimize Job Scheduling.
1228 kes Implement restore callback that Dirk and I agreed on for bat
1229 restore. This fixes bug #928. Restore of backup of zero files fails.
1230 kes Fix SQL Catalog logging which broke with new db_escape_string
1233 Release Version 2.2.4
1235 kes Fix bacula_cats.def for new db_escape_string().
1236 kes Increase size of name string when FD making connection to SD.
1237 May fix bug #953. FD->SD connection failure.
1239 kes Add code to help Dan debug 2drive-incremental-2disk test.
1240 kes Add code to try to fix bug #908.
1241 kes Add waits to multiple exit detection code to try to force pid
1242 file to always be deleted.
1243 kes Restore good dev.tar.gz to rescue set appropriate binary property.
1244 This fixes bug #950.
1245 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
1246 trying to switch drives by checking for blocking before unblocking.
1248 kes Cancel storage daemon in all cases where FD reports error. This
1249 should fix virtually all cases of bug #920.
1250 kes Fix db_escape_string() for MySQL which did not compile.
1252 kes Fix error message that was clobbered when Dir tells SD it does not
1253 have write permission on Volume. This should fix a minor point
1254 in bug #942, but not the main problem.
1255 kes Add code to cancel job in SD if FD connection fails. This should
1257 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
1258 dvl Pass jcr and db into db_escape_string() to enable better escaping
1260 kes Fix migration code to get correct Volume name with multiple volumes
1261 by skipping |. Fixes bug #936.
1262 kes Implement patch supplied by Landon to fix bug #944 where using
1263 TLS with bconsole uses 99+% of the CPU.
1264 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
1266 kes Move patches into patches directory.
1268 ebl Fix bug #946 about 'bacula-dir -t' which doesn't works
1271 ebl Using 'm' in bconsole will show messages like before,
1272 and not memory usage.
1273 kes Fix bug #935, and probably also bug #903 where files were not
1274 restored. MediaId was not properly set in JobMedia record after
1277 kes Suppress chown and chmod error messages if the FD is not running
1280 kes Apply Martin Simmons' patch that should turn off the new API usage
1281 when batch insert is turned off allowing building on older
1283 kes Add ./configure search in qwt-qt4 for qwt package
1285 kes Bacula is now free of 3rd party GPL copyrighted code!
1286 kes Remove idcache.c
1287 kes Add guid_to_name.c/h which replace idcache.
1288 kes Remove enh_fnmatch.c. Make code that references it use fnmatch.c
1290 ebl Detect if new PosgreSQL batch insert API is present.
1291 kes Correct incorrect mempool call causing Director crash. Occurs on
1292 systems without va_copy().
1293 sb Update spec files for 2.2.1 release
1295 kes Fix memory pool call in ua_output.c. bug #934.
1296 kes Replace fnmatch.c and fnmatch.h by modified BSD versions.
1297 Add test program to fnmatch.c
1299 kes Integrate patch to README.vc8 from
1300 Hederer Jean-Sébastien <hedererjs@asperience.fr, had to manually
1301 edit it to get it into Unix patch format.
1302 kes Implement mkpath.c to replace old FSF makepath.c
1304 kes Implement savecwd.h and savecwd.c. Remove FSF versions.
1306 Release Version 2.2.1
1308 kes Update POTFILES.in
1309 kes Cleanup a few underquoted AC_DEFUNs in configure
1310 kes Apply patch from Martin Simmons that adds a test for va_copy to
1313 kes Fix bug #921 by increasing the number of tries to create a new volume
1315 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
1316 can be called multiple times. Implement a version for machines
1317 without va_copy() that gets a big buffer.
1319 kes Integrate more portable zone offset code into bsmtp.c
1320 Submitted by Attila Fülöp.
1322 kes Fix bad SD->FD return status reported by
1323 (James Harper) <james.harper@bendigoit.com.au>
1324 ebl Fix a bug in read_close_session which return random status
1325 thanks to James Harper
1327 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
1328 and directory names during restore of single file/directories.
1329 kes Add sanity checks to .sql command when string is empty. Hopefully
1330 that will resolve Dirks Director crash.
1332 kes Apply patch submitted by Martin Simmons that corrects a seg fault
1333 in the bsmtp chat subroutine when debug is >= 10.
1335 kes Fix Director crash when running bat SQL queries.
1336 kes Add David's notes on Item 8: Copy pools.
1338 kes Rework projects file to be current and ready for a vote.
1339 kes Enhance lex scanner error message.
1341 kes Tweak LICENSE file to mention BSD code.
1342 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
1343 if specified on the ./configure.
1344 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
1345 This class is intended to allow us to open a second bsock to the
1346 Director while in the restore subdialog.
1348 kes Fix configure to create bat Makefile before creating dependencies.
1349 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
1350 kes Add a tooltip to the tray monitor.
1351 dvl Set the Director's PID file before dropping privs. This fixes
1354 kes Update AUTHORs file
1355 kes Increase the default max concurrent jobs to 20 in FD and SD to
1356 correspond with the default .conf files.
1357 kes Rewrite the Win32 service routines. This eliminates the 3 copies
1358 some different, of the same file created by RN when porting the
1360 kes Rearrange some of the Win32 directories and the placement of the files
1362 kes Set DEVELOPER flag in version.h
1364 ========================================================================
1365 Release Version 2.2.0
1367 kes Apply a second doc patch from Marc.
1368 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
1369 improves the tips section that discusses how to setup multiple
1372 kes Update bat README file.
1373 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
1374 corrects a typo in the Recycle status check in db_find_next_volume().
1375 This will probably fix a number of annoying problems with multiple
1377 kes Modify most of dird/msgchan.c to use bsock class calls rather than
1378 bnet calls -- no functionality change.
1380 kes Modify the Verify output to specify if files are missing on
1381 the Volume(s) or disk. Fixes confusion in bug #916.
1382 kes When more than one Volume is read in a migration job, the last
1383 Volume bytes reported are from the last read volume rather than
1384 the last written volume. Fixed. This fixes bug #910.
1385 kes Fix display of Recycle flag after update volume=foo recycle=yes.
1386 It previously printed New Recyle flag is: no. This fixes bug
1389 kes Correct seg fault when switching tape drives during restore.
1390 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
1391 be used until after 2.2.0 release.
1393 kes Remove fnmatch() in SD that permitted wild card specifications.
1394 This fixes bug #914.
1396 kes Fix %g in filename returned by SQL for browse tree reported by
1398 kes Fix configure so that it puts config.out in the cwd rather than
1400 kes Attempt to fix the locking problem reported by Eric in bug #906.
1401 kes Make berrno class to leave errno unchanged after constructor call.
1402 kes Make bnet_server use the heap rather than the stack to allocate
1403 its socket fd pointers to avoid a crash at termination. Problem
1404 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
1406 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
1407 and putting it in depkgs-qt along with Qt4.3.
1409 kes Rework code in acquire.c that switches drives for reading when
1410 the Media Type does not match. This should fix bug #906
1412 ebl Fix a director segfault during job setup #907
1413 kes Correct seg fault in postgresql when first operation returns no
1414 rows. Fixes Dirks File browser problem seg fault with bat.
1416 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
1417 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
1420 kes Implement PopUp YES/NO dialog for bat.
1422 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
1424 kes Correct RunScript to terminate job in FD on failure.
1425 kes Change abort_on_error and AbortJobOnError to fail_on_error
1426 and FailJobOnError in RunScripts.
1427 kes Minor tweaks of code formating in RunScripts, principally to
1428 avoid depassing 80 columns.
1430 kes Eliminate one #ifdef Win32 in bsmtp
1431 kes Implement grow tool to grow a file for testing very large databases.
1432 kes Add big-vol-test to test Bacula seeking with > 5GB.
1435 kes Modify find_next_volume() to return all values in Media record.
1436 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
1440 kes Update Release notes
1442 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
1443 Warning, in previous beta version, all media get from scratch keep their
1446 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
1447 This should fix bug #842. Made a note to look at removing the temp
1448 files at the end of the install.
1449 kes Add ability to mount and unmount a file device providing it is
1450 marked as being removable and has the appropriate mount and unmount
1451 commands defined in the Device resource. This fixes bug #830.
1452 kes When applying a storage override, release all previous storage
1453 definitions rather than just prepending the new storage.
1454 This should prevent a good deal of confusion.
1456 kes Implement ./configure search for qwt libraries.
1458 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
1459 Win32 FD. This should fix bug #893.
1460 kes Remove an unnecessary beep in Win32 init code.
1461 kes Update copyright dates in Win32 executable about boxes.
1462 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
1463 code with a BSD getopt.c and getopt.h.
1464 kes Remove sched.h from the Win32 compat directory -- not used.
1465 kes Remove the Exit menu item from the Win32 tray monitor. If you really
1466 need to shut it down, do it through the services panel or the command
1468 kes Remove some inappropriate Bacula FSFE copyrights.
1469 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
1470 kes Fix regress config non-portable test as pointed out by
1471 Florian Heigl <florian.heigl@gmail.com>
1472 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
1473 as pointed out by Florian Heigl <florian.heigl@gmail.com>
1475 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
1476 Reported by Frank Sweetser.
1480 kes Fix client-only build.
1481 kes Integrate client-only fixes for bsys (initgroups) and conio from
1482 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
1483 kes Make arguments to get_scratch_volume() in same order as other
1485 kes Rework the prune_volumes() subroutine so that after purging and
1486 no volume found in desired pool, it will check for a scratch
1487 volume. This prevents recycling the whole scratch pool.
1488 kes Add code to status storage to print boffset_t (largefile support).
1490 kes Move qwt (Graphics libarary for Qt4) to depkgs.
1491 kes You now need a --with-qwt=<dir> to be able to build bat.
1492 kes Update src/win32/cats/bacula_cats.def to include the new
1493 db_get_query_dbids() call on Win32.
1495 kes Correct a problem when selecting a scratch volume and moving
1496 it to another pool that lost some columns.
1497 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
1498 kes Enhance Autochanger error messages to include Volume and device name.
1499 kes Rework prune_volumes() code to take account of InChanger flag,
1500 and to handle recycling volumes going to the Scratch pool and
1501 current pool because the RecyclePool directive.
1502 kes Implement a better and more efficient db_get_query_dbids() to
1503 handle creating and passing back a list of DBIds.
1507 kes Start work on new more efficient DBId subroutine. First use
1508 will be for recycling volume to Scratch inchanger.
1509 kes Increase number of JobIds in pruning from 1000 to 10000.
1510 This to be replaced by above routine.
1511 kes Begin implementation of building Qt4 on Win32.
1512 kes Correct typo in fix I added for bad TLS shutdown.
1513 kes Pull 2.0.3 patches into patches directory.
1514 kes Update Release notes. Include qt-console in line count.
1515 kes Update Projects file.
1517 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
1518 bug in migration code where a job that spanned two volumes
1521 kes Implement new BST_DESPOOLING blocked state. Change from locking
1522 during despooling in SD to blocking. This means that other threads
1523 can work with the device structure, in particular the reservations
1524 system while despooling.
1526 kes Fix return in reservation message queue that missed clearing
1527 the jcr lock (implemented 26Jun07 below).
1528 kes Rename a number of dev methods to make locking function names
1530 kes Document locking in lock.c. Move lock structures to new file
1533 kes Move reservations message lock to lock jcr only this
1535 kes Move main SD locking code into lock.c (new file).
1536 kes Update Win32 build to include lock.c
1540 kes Dirk committed the qwt library code for drawing graphs in bat.
1541 kes Tweak install of qwt so that it is integrated with ./configure.
1543 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
1544 out by Eric (my typo).
1545 ebl Fix configure.in to get batch mode enable
1546 kes Return correct string from authenticate.cpp in bat when connecting
1548 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
1549 spurious line drops when using TLS.
1550 kes Do not file reparse points when restoring a file that already
1553 kes Implement Windows reparse points -- similar to directories, but
1554 we do not descend into it. This is a first cut. They seem to
1555 be backed up, but restore is not yet tested.
1556 kes Remove restore_blocking in tls code when shutting a socket to leave
1557 it in blocking mode. Hopefully this will fix the encryption bug
1558 reported by Frank Sweetser.
1559 kes When opening a file for backup, tell the OS that we are going to
1560 read it sequentially -- optimization.
1561 kes Change variable names in authenticate_director() to not conflict
1562 with member names in bat. Caused great confusion with compiler,
1565 kes Queue openssl error messages in case of comm problem.
1566 kes Do shutdown() call if socket terminated.
1567 kes Remove some duplicated code in tls.c
1568 kes Move more of the bsock member variables into private and access
1570 kes Add Frank Sweetser's tls-test to the regression suite.
1572 kes Add Swedish sv.po file
1574 kes Don't print clock skew message in FD if less than 3 seconds diff.
1575 kes Add a bit of VSS info to status client.
1576 kes Implement a first cut of Vista VSS, using Win2003 code.
1578 Release: 2.1.20 beta
1580 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
1581 loaded tape but uses first drive).
1582 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
1583 This was indeed a Win32 issue.
1585 kes Simplify search of autochanger for in-use Volume.
1586 kes Fix exit condition of check for in-use volume. kes Remove
1587 inappropriate my_postgresql_free_result() in db_close()
1589 kes Fix bad return in FD when encryption signature not found.
1590 Probably caused a crash.
1591 kes Inhibit missing encryption signature error messages for
1592 file types where no signature computed.
1593 kes Correct inverted check on autochanger in reservation system.
1594 kes Tweak debug code in autochanger reservation.
1596 kes Add some additional locking in the cats directory in subroutines
1597 that modify packet variables called from batch insert.
1598 kes Rework how dcrs are allocated. new_dcr() can now be called
1599 with an existing pointer, and it will simply clean it up.
1600 This allows the reservation system to test various different
1601 devices, and will permit easy device changes.
1602 kes A bunch of changes all over to handle new new_dcr() calling
1604 kes Work more on the Volume management in the SD. Remember Volumes
1605 for tape drives and for autochangers (even virtual disk changers).
1606 kes When looking at the Volume list to reserve a drive, handle
1607 autochanger names correctly by interating through the changer
1608 devices. Also call the Director to see if a Volume is suitable
1609 for the current job.
1610 kes Fix some bugs in bscan. Make sure all media records are written.
1611 Make sure that valid JobMedia records are written for disk files.
1612 Previously they were completely wrong.
1613 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
1614 that the URLs don't change and so that the developers will all
1615 work off the same copy. Rebuild from scrach.
1616 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
1618 Release: 2.1.18 beta
1620 kes Fix seg fault in FD from incorrect digest size.
1621 kes Fix argument to non-OpenSSL crypto.c subroutine.
1623 Release: 2.1.16 beta
1625 kes Remove a few malloc()s from the encryption code.
1626 kes Use the class calls to bsock in filed/backup.c and restore.c in
1627 place of the old bnet_xxx code.
1628 kes Implement code that does an on the fly calculation of the
1629 signing digest during restore of encrypted files. It makes
1630 a best guess at the algorithm, and if it is not correct, will
1631 then revert to the old code which reads the file after it is
1633 kes Implement at least one missing crypto stream in stream_to_ascii()
1634 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
1635 #877 where a reload with bad syntax causes Dir to exit.
1637 Cut: 2.1.14 beta (not released)
1639 kes Do not free a volume on a tape drive until another volume is
1640 mounted and read, or the autochanger unloads the volume.
1641 This should help the SD re-use volumes that are already mounted,
1642 and should fix bug #886.
1643 kes Apply patch from user brettedgar that allows gnome2-console include
1644 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
1645 kes Apply patch from Lucien Weller that fixes day of week calculation
1646 because of DST flag problem. Fixes bug #887.
1648 kes Move find_next_appendable_volume() to after acquiring a valid device
1649 in reserve.c. This fixes bug #864 -- confirmed by reporter.
1651 kes Unable to reproduce bug 872. However added additional testing for
1653 kes Bug #874 resolved by documenting SQLite limitations.
1654 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
1655 kes Bug #881 resolved by removing typo in mtx-changer script.
1656 kes Made Frank Sweetser's wiki the official Bacula wiki with his
1657 approval. Added a link to the wiki on the web page, and implemented
1658 a backup from http://paramount.ind.wpi.edu
1660 kes Fix update allfrompool to pass pool name.
1662 kes Convert to pure GPL v2 license.
1663 kes Fix sscanf problems reported by Peter Buschman that caused
1664 a bus error on Solaris.
1665 kes Rework (simplify) the select prompt in bat.
1666 kes Move get_jobid_from_tid() into lib and create a
1668 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
1669 should definitely fix the problem of lost error messages in the
1671 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
1672 kes Eliminate tcpd.h from the project. Enclose the #include from the
1673 library with extern C ...
1674 kes Add print of signal name when a signal is trapped.
1676 Release: 2.1.12 beta
1678 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
1680 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
1681 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
1682 makes SQLit3 run 30 times faster, though a bit less safe.
1683 kes Implement --with-batch-insert in configure and detection of thread
1684 safe libraries. It is on by default, but turned off if no thread
1685 safe library (e.g. SQLite 2) is available.
1687 kes Fix Bacula PostgreSQL buffer overruns.
1688 kes Do better checking for NULL results returned from PostgreSQL;
1689 implement retry for failed queries; clear results buffer after
1690 failed query. Hopefully this will correct the PostgreSQL failures.
1692 kes Implement algorithm to handle only one appendable volume with
1693 Prefer Mounted Volumes = no.
1694 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
1695 returned from a query.
1696 kes Make volume lock recursive.
1697 kes Implement an additional volume reservation algorithm that
1698 starts by considering all reserved volumes then uses the
1699 old brute force algorithm of searching the resources to
1700 find a suitable device.
1701 kes Add new reservations debug code and refine the old code.
1702 kes Update the win32/dll/bacula.defs file.
1704 kes Tweak reservations algorithm to permit a few more cases, i.e.
1705 volume reserved, but on different drive, ...
1706 kes Enhance SD status to include Pool and Media Type for drive in a
1707 more readable format (a bit longer).
1708 kes Fix PostgreSQL double free.
1710 kes Minor refactoring of restore decryption code.
1711 kes Add code to smartall.c to detect double free of a buffer.
1713 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
1714 so that bsmtp will create a correct email address (mailbox only).
1715 kes Modify 'memory' command so that the buffers are listed as 'In use'
1716 to avoid confusion with Orphaned buffers.
1717 kes I reworked the OpenSSL include/lib flags to be handled in
1718 the standard Bacula way, which should fix bug #863 concerning
1719 non-standard OpenSSL libraries.
1721 kes Implement Help Browser window for bat.
1722 kes Fix reload bug that reset StorageId to zero.
1724 kes Fix TLS #ifdefing when TLS turned off.
1725 kes Ensure that when labelling a tape with Slot=0 that InChanger
1727 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
1729 kes Add StartTime to final uar_sel_jobid_temp query so that we can
1730 add DISTINCT (required by PostgreSQL).
1731 kes Implement BSOCK authenticate_director() method. Eventually will
1732 authenicate all daemons.
1733 kes Move several more functions into the BSOCK class.
1735 kes Add code to tell the OS that we no longer need a cached
1736 file that we were reading. In findlib/bfile.c. Also,
1737 only cache files that we are reading. Thanks to
1738 Tobias Oetiker <tobi@oetiker.ch> for the idea.
1739 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
1740 kes Implement script to automatically generate cats and dll .def
1741 files for Win32 dll.
1742 kes Update README.mingw32 to include new .def file generation.
1743 kes Correct typo in UTF-8 error message as reported by:
1744 jhernandez <julianhernandez@gmail.com>
1745 kes Add additional sm_check() code on debug level 1.
1746 kes Set default debug level to 1.
1747 kes Trap SIGABRT in attempt to get traceback.
1749 kes Reduce bat connect timeout from 30 to 15 seconds.
1750 kes More restructuring and implementing BSOCK class in place of
1752 kes Remove a few unnecessary malloc() tests in crypto code.
1753 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
1754 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
1755 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
1757 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
1759 kes Fix Verify InitCatalog. The attributes were not pointing to the
1760 correct saved location.
1761 kes Implement message callback so that GUI is sure to get all
1762 daemon messages. Currently displayed in a dialog in bat.
1763 kes Ignore SIGUSR2 (Bacula timer) in bat.
1764 kes Apply regress patch from bug #859 to allow regress to work
1765 with Solaris compiler.
1767 kes Begin adding TLS support to bat.
1768 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
1769 clean up lex.c and make it more readable.
1771 kes Move more bnet functions into the BSOCK class.
1772 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
1773 kes Complete change of berrno strerror() method to bstrerror()
1775 Release: 2.1.10 beta
1777 kes Cleanup incorrect email addresses in bsmtp.
1778 kes Make bat display initial messages rather than discard them.
1780 kes First cut of adding .mod to the run command.
1781 kes Implement auto display of messages in bat.
1782 kes Enhanced preferences to allow all Bacula output to be
1785 kes Try to make bsmtp date routines more generic.
1786 kes Fixed bug #856 autochanger documentation.
1787 kes Rework bsmtp date editing for Win32. This fixes bug #854.
1788 kes Add new cats entry point so Win32 builds.
1790 kes Attempt to fix bsmtp date editing on OSes without %z editing.
1792 kes Do better checking for the MySQL 64 bit libraries looking for both
1793 .a and .so libraries.
1794 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
1795 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
1796 kes Require the thread safe version of MySQL during configure. Thanks
1797 to Andre Noll for pointing this out.
1798 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
1799 continuing in migration code.
1800 kes Apply implementation of tray-monitor font derived from gnome-console
1801 submitted by Andreas Piesk <a.piesk@gmx.net>
1803 kes Eliminate important memory loss in SQLite
1804 kes Fixed the batch insert MySQL thread specific data that was not
1805 being freed. See cats/mysql.c:db_thread_cleanup().
1806 kes Fix restore before command.
1807 kes Convert old hdr.name to name() in a few places.
1808 kes Implement update jobid command.
1809 kes Return all time_t dates in db_get_job_record()
1810 kes Stop watchdog in SD earlier.
1811 kes Put Pool just after Storage in please mount message.
1812 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
1815 kes Update the po files.
1816 kes Fix Verify InitCatalog by making it cache attributes.
1818 kes Change name bacula-bat to bat for man 1 page to correspond to
1820 kes Check for client and store NULL pointers in status command. This
1822 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
1823 kes Fix sign extended editing of %p.
1824 kes Clean out a little old #ifdefing in cats/mysql.c
1826 kes If time diff between DIR and FD is more than 600 seconds convert
1827 INFO message to WARNING.
1828 kes Implement heap size display in status for all daemons.
1829 kes Attempt to fix MySQL db open memory loss (not successfull).
1830 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
1831 kes Eliminate memory loss in MySQL (possibly other SQLs) during
1832 Query. This looks like a MySQL but but by doing extra releases,
1833 the memory goes away. This should fix bug #847.
1835 kes When backup fails, cancel SD before waiting for sd termination.
1836 kes If SD is waiting for FD to connect during cancel, wake up the
1838 kes Fix fsf code so that errno is correctly reported.
1839 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
1841 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
1842 so that Bacula doesn't later stumble into a seg fault.
1843 kes Use the term Restore Client in the restore Job report.
1844 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
1845 the original job's FileSetId.
1846 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
1847 spooling in migration jobs. Not yet tested.
1848 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
1849 reading conf file from a pipe. However, do it with open_bpipe()
1850 rather than popen. Not yet tested.
1852 kes Fix an ugly bug where the VolCatBytes were getting updated
1854 kes Implement bconsole memory command that prints current memory
1855 usage, plus smartalloc dump.
1856 kes Clarify some error messages in backup, admin, and migrate.
1857 kes Shrink label dialog to smaller size.
1858 kes Invert Cancel OK buttons on restore to be OK Cancel.
1859 kes More strerror() to bstrerror() conversions.
1861 kes Start implementing bstrerror() in place of strerror().
1862 kes Stripping path -- seems to work.
1864 kes Prevent door and port files from being restored (mostly
1866 kes Free an unreleased buffer in compat code.
1867 kes Change console Job name from *Console* to -Console- to eliminate
1868 Win32 filename problems. Put Win32 path separator when creating
1869 Console file. This fixes bug #846.
1870 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
1872 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
1874 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
1875 to force Win32 error message.
1877 kes First cut strip path. The data should be passed to the FD,
1878 but nothing is done with it yet.
1879 kes Enhance the digest and signature routines in the crypto
1880 library to accept a JCR and to use it to print error messages
1881 so that they will go in the Job report rather than the daemon's
1883 kes Simplify some of the verify signature code.
1884 kes Simplify a few of the alternative returns in the signature
1887 ebl Use only POSIX regex instead of GNU regex in breg.c for
1888 File relocation. It fix broken freebsd compilation.
1889 kes Convert all other Dir files to use new ua class message
1891 kes Tentative fix for missing digest signature in bug 807.
1892 kes Correct handle problem in new win32_ftruncate routine.
1893 kes Convert ua_purge.c and ua_update.c to use new ua class
1894 message routines for bat.
1896 kes Correct incorrect installation of LICENSE in Win32 installer.
1897 kes Display LICENSE at the beginning of the Win32 install.
1898 kes Attempt to correct the need for the png files to be installed
1900 kes Reapply my bat.conf install script in qt-console. I think I
1901 editted bat.pro instead of bat.pro.in and it was lost.
1902 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
1903 the /var/lock/subsys for subsysdir. Also corrects typos in the
1906 kes First cut update job.
1907 kes Correct configure to include qmake of src/qt-console directory.
1909 kes Make restore job yes/mod/no print in one command so GUI works.
1910 kes First cut implementing backup and restore client.
1911 kes Correct editing in Verify output that caused a seg fault.
1913 kes Insure that bat.conf is not overwritten during installation.
1914 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
1915 while I was implementing migration in March 2006 !
1917 ebl Cleanup file relocation, using char *RegexWhere instead of
1918 char *where + bool where_use_regexp
1919 kes Update some manpages and add bat manpage.
1920 kes Make a first cut at converting bacula.spec.in for bwx-console
1922 kes Apply patch from John Goerzen to add hostname as fourth argument
1923 to make_catalog_backup script.
1924 kes Fix typos I introduced into bsmtp.c
1925 kes Make pm_strxxx() routines handle input of NULL pointer. This
1926 is to protect from NULL pointers returned from SQL databases.
1927 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
1928 kes Add more debug to FIFO code -- fix fifo regression test.
1930 kes Implement posix_fadvise in FD, and for reading spool files in SD.
1931 kes Add thread timer to bnet_connect() to break from OS if wait time
1934 kes Update Win32 build to include new files, new symbols, and
1936 kes Implement socket level heartbeat (tcp_keepidle)
1937 ebl Commit File relocation patch
1938 kes Make bat have 'make install' target.
1939 kes Warn during install if old gnome-console binary found.
1940 kes Warn during install if old wx-console binary found.
1941 kes Add -8 option to bsmtp command line to add content type utf-8.
1942 Fixes bug #809. (Character coding problem in bsmtp).
1943 kes If < is found in target (from, to, cc) then do not enclose the
1944 target in < > in bsmtp. Fixes bug #772 (malformed address).
1945 kes When printing certain items in dbcheck, stop after 300000.
1946 Fixes bug #822. (dbcheck loops).
1947 kes Incorrect status in Dir after waiting for mount with poll set.
1950 kes Extend idea of Prefer Mounted Volumes to mean a volume about
1952 kes Print waiting to reserve a device every 5 mins.
1954 kes Don't call close_part in label.c if tape and relabel.
1955 kes Don't free volume if busy in close() -- should help with
1957 ebl Fix #824 RunScript bug (After script could be execute twice)
1958 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
1959 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
1960 Add a regression script to test RunScript
1962 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
1965 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
1966 deprecated. No additional bugs will be fixed, and they will be dropped
1967 in a future release (probably 2.4.0).
1968 kes Change name of wx-console to bwx-console to make it more Bacula
1970 kes Change the name of gnome-console to bgnome-console to make it
1973 kes Some time in March, a Feature Request with patch from Jorj Bauer
1974 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
1976 The ability for the director to validate a Client (FD) CN against
1977 an arbitrary set of patterns rather than the hostname, with
1978 A new 'TLS Allowed CN' set of directives which are implemented
1979 in the Client resource. Then pattern matching is used in place
1980 of hostname matching against the Certificate's CN. As an example, we
1981 have certificates which (a) use a local CA, and (b) have a CN of the
1983 kes Add new/changed entry points to Win32 build
1984 kes Create unaccepted-projects for projects that are not accepted.
1985 kes Simplify locking in the reservations system.
1986 kes Add more debug code in reservations.
1987 kes Make sure error condition on reserving a volume is handled correctly.
1988 kes Correct handling of volume_in_use.
1989 kes Correct handling of initializing a device.
1990 kes Move handling of broadcasting releasing a device into release_device().
1991 kes Correct attaching dcr to dev so that it is only done if device
1992 is properly initiated.
1994 kes Locking debug level tweaks in SD.
1995 kes Tweak new Volume code.
1997 kes Add exec external-command [wait-seconds] to bconsole. This
1998 executes the external-command. Note! normally external-command
1999 should be enclosed in double quotes.
2000 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
2001 it should normally be off in a production system.
2003 kes Implement die command for SD so that we can force it to dump.
2004 kes Implement SD lock debug code.
2005 kes Implement new algorithm for keeping Volume list in SD. It
2006 is now owned by the device.
2008 kes Implement new code for freeing in use volumes that should
2009 resolve if not all, some of the problems of multiple drive
2010 tape conflicts described in bug 801.
2012 kes Fix gui/bacula-web/images files in svn.
2013 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
2015 ebl Fix a bug in batch mode (in string escape)
2016 kes Correct migration prune SQL typo that crept in in a
2017 recent 2.1.x change.
2019 kes Move bnet_despool() into class in bsock.c
2020 kes Modify job report to include director name and Build OS.
2021 kes Move drop root privilege and check_catalog() before fork.
2022 kes Add update database scripts (version 9 to 10) to updatedb directory.
2024 ebl Check size and age of each file after its backup to see if
2025 it has changed during backup, if 'checkfilechanges' is set.
2026 The FD will do an extra check (stat(2)) after
2027 each file backup. mtime, ctime and size are compared with
2028 'before backup' information. If time or size mismatch, an
2029 error message will be generated. You must upgrade FD to use it.
2031 kes Make database name and user configurable
2032 --with-db-name=xxx --with-db-user=xxx
2033 kes Add back database type to message.c for debugging.
2035 kes Implement dir_sql() which issues an SQL query.
2036 kes Modify bat medialist to use dir_sql() and do some minor C++
2037 formatting as well as eliminating a number of pointers, simplifing
2040 kes Fix some of the mtx-changer grep commands for tape label readers.
2041 kes Convert a number of bsendmsg into the appropriate send/warning/error
2042 message class calls.
2043 kes Suppress the using database message in the .sql command.
2044 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
2046 kes Add context menu for floating a window.
2047 kes Some minor cleanup and name changes in qt-console
2048 kes Add doing mt setblk 0 in Win32 mtx-changer.
2049 kes Apply Martin's bug fix to move definition of ENODATA for
2051 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
2052 sqlite2 and sqlite3.
2054 kes More pruning cleanup.
2055 kes Turn on wait_for_drive by default in mtx-changer.
2056 kes Turn on Batch insert code by default as it now passes regression.
2057 kes Add ./configure --enable-bat to enable building of Bat.
2058 No install yet though.
2060 kes Implement a new .sql command for bat.
2061 kes Implement code to turn off pruning in obtaining the next volume.
2062 Pruning is turned off for the status dir command, but turned on
2063 for SD requests and for the list nextvolume command.
2065 kes Correct Qmsg() that was not updated correctly when committing a
2066 previous change (probably the recent TLS patch).
2068 kes Write new subroutine is_volume_purged() that explicitly checks
2069 if the Volume is purged, and if so marks it as such. This should
2070 resolve problems reported about needing to mount twice to recycle
2072 kes Rewrite pruning algorithm to do more work in the SQL engine, and
2073 to pass a list of JobIds to be deleted to SQL. Also, minimize the
2074 amount of duplicated code.
2075 kes Do volume pruning only for the Media Type desired (reduces pruning time
2076 if multiple Media Types are in the same pool).
2077 kes Implement more detailed info in the Job report for the Bacula version
2079 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
2081 ebl Add bbatch tool to bench database and insert mode.
2082 Fix sql quote stuff in batch mode
2083 Fix sql stuff for mysql
2085 kes Correct problems with am/pm scheduling. Fixes bug #808.
2086 kes Implement new prunning code that prunes up to 1000 jobs at
2087 the same time. The same technique can be applied to a number
2088 of other prune/purge subroutines.
2089 kes Add an insanity check when starting a new tape job to ensure
2090 that the tape position has not been changed. If so fail the
2092 kes Fix Win32 build for dlls to add the folllowing:
2093 src/lib/bsock.c -- new file with new entry points
2094 src/lib/dlist.c -- new entry points
2095 src/cats/sql_create.c -- new entry point
2096 src/cats/sql_cmds.c -- new DATA item exported
2098 ebl batch mode cleanup bscan-test is ok now.
2099 kes Implement SD code to check length of disk volume before appending.
2101 kes Correct return status on db_batch... routines.
2102 kes Add call to db_write_batch_file_records() to migration code.
2103 ebl Fix AfterJob timing
2104 kes Move the checking of the database in initializion of the Director
2105 to after we drop privileges. This avoids the need for both root
2106 and bacula access to the DB.
2107 kes Correct a misplaced variable definition in src/filed/backup.c
2108 kes Correct how the new batch insert db_create_attributes_record()
2109 uses the arguments. Caused a seg fault in bscan.
2110 kes Implement lock() and unlock() methods in DEVICE class.
2111 Implement block() and set_block(xx) methods in DEVICE class.
2112 kes Modify bnet_connect() so that it uses time() to check for the
2113 wait time expiring (on some OSes, some system calls may not
2114 return immediately).
2115 kes Modify Verify to obtain the previous JobId when it is actually
2116 running rather than at schedule time (as it was in 1.38.x).
2117 kes Fix src/job.c to handle MaxWaitTime correctly. This should
2119 kes When checking pid in pid file, continue running if the pid is
2120 the same as ours. This occurs on IRIX after a system crash.
2123 kes Extend new GUI API.
2124 kes Make the ua structure a class, and implement send_msg(),
2125 error_msg(), warning_msg(), and info_msg().
2127 kes Apply fix from for building wx-console on the Mac from
2129 kes Implement new select mechanism for GUI programs.
2130 kes Reorganize initialization of stackedWidgets in bat.
2132 kes Add updated nagios plugin supplied by Christian Masopust.
2134 kes More bat implementation.
2135 kes File migrate bug with Pool Occupancy using mediaid instead
2136 of jobids. Fixes bug #795.
2137 kes Fix orphaned buffers in filed backup and verify due to
2138 crypto buffers not freed during errors. Fixes bug #789.
2139 kes Extend new GUI api code to tree commands.
2140 kes Ensure that tree and dot commands check console ACLs.
2141 kes Permit marking directory with trailing slash.
2142 kes Allow 20 console connections (instead of only 10).
2144 kes Add smartctl call to bacula-sd.conf as an example of getting
2147 kes Modify jobq.c to let simultaneous restore jobs run. This may
2148 cause them to fail if they cannot get a drive.
2149 kes Add Client Connect Wait to Storage daemon to permit users to
2150 modify the time the SD waits for a FD connection.
2152 kes Correct virtual changer check which was backwards. This caused
2153 volumes to be unloaded into slots already occupied.
2155 kes Apply Command ACL filter to JobId list in restore command.
2156 kes Correct typeo in var.c patch.
2158 kes Don't let Bacula prune File or Job records for the current Job.
2159 kes Fix variable substitution pad + inc bug reported (with patch)
2162 kes Correct SQLite log table index as reported by Luca Berra.
2164 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
2166 kes Begin implementing new comm signals for API.
2167 kes Fix a few places in lib/message.c where the open fd may
2169 kes Continue implementing lib/bsock.c (real class). Make jcr,
2170 who, host, and port private. There are new methods to access
2171 them for non-class use. This required touching a number of files.
2173 kes Add LANG=C to autoconf/randpass so it works with languages other
2174 than English. Fixes bug #788.
2176 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
2178 You will not be able to generate Include/Exclude list any more.
2179 It will be fixed soon.
2180 If you want to use this, you can apply
2181 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
2183 kes Restore of sockets created false error messages because Bacula
2184 no longer restores sockets, but the code was still trying to
2185 set the attributes on a non-existent file. Reported by a user.
2186 ebl finish RecyclePool feature
2187 Media will takes Pool.RecyclePool
2188 when moving from Scratch to a Pool or when user will do
2189 update volume=xxx frompool
2190 To use it, add RecyclePool = aPool to your Pool resource
2193 RecyclePool = Scratch
2197 kes Expand new BSOCK class adding signal() and new BNET signals.
2198 kes Begin enhancing the dot commands adding a new API function
2199 that returns more information and will make it easier
2200 to interface to the Director from a program.
2202 kes Make DEVICE fd private. Its new name is m_fd, and can be
2203 obtained with dev->fd() outside the class. This is the
2204 first of many DEVICE members to be made private.
2205 kes Implement Michael Renner's idea on having a virtual disk
2206 changer. I made some minor modifications (e.g. I did not
2207 implement the Virtual Changer directive, but simply set
2208 the Changer Command to an empty string.
2210 kes Implement a BSOCK send() method that writes the whole record
2211 in a single write() request rather than in two.
2212 ebl add update volume=xxx recyclepool=yyyy
2213 volume takes recyclepool from pool when using update volume=xxx from pool
2215 kes Fix encryption deblocking bug, which caused some restored files
2216 to be truncated. This fixes bug #763.
2217 kes Add FD event sequence order prepared by Eric -- for RunScripts.
2218 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
2220 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
2221 ebl Use btime_t instead of uint64_t in media patch.
2223 kes Optimize the use of the database a bit in the Status dir command.
2224 Only open it when needed, ensure that if any previous database
2225 was opened, it is closed.
2227 kes Correct VolCatBytes bug from media patch.
2228 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
2229 in the case of orphaned records.
2230 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
2231 and File records in 300K chunks to be more efficient. This
2232 idea came from Juan Luis Frances (if I remember right).
2233 kes Apply Eric's scratch patch that moves a purged Volume to
2234 the RecyclePool. Question: how is RecyclePool set? what
2235 happens to the ScratchPool?
2236 kes Apply Eric's media patch that collects read/write media
2237 times as well as byte counts. This patch requires a
2238 simultaneous upgrade of the DIR and SD. Note, there
2239 should be some way to turn off timing. I'm not sure
2240 times are in Bacula units.
2241 kes Apply Eric's batch-insert patch.
2243 kes Update projects list.
2245 kes Implement Include/Exclude file lists in FD as dlists using
2246 the new dlistString class. This permits efficiently having
2247 large include/exclude lists and completes project Item 25.
2248 kes Fix dird/ua_cmds.c so that a cancel command checks if the
2249 console is authorized to cancel the job. This fixes bug
2251 kes Modify SD so that the VolCatJobs medium record is updated
2252 at the beginning of a Job rather than the end. This
2253 fixes bug #775 where exceeding MaxVolJobs caused jobs
2255 kes Added a mutex around getting and setting Volume information
2256 so that multiple simultaneous jobs will single thread.
2258 Switch to using Subversion
2259 kes Remove src/pygtk-console/ from configure
2261 kes Delete src/lib/btree.c from win32 build, then add rblist.c
2262 plus the entrypoints.
2263 kes Apply patch supplied that corrects debug print
2264 in canceling jobs for max run time. Supplied as
2265 part of bug #621, which was previously fixed.
2267 kes Test on job_canceled() and sd_msg_thread_done inside
2268 loop starting the message thread to avoid a race condition.
2270 kes Remove rl_catch_signal from console.c as it conflicted
2271 with the header definition. Fixes bug #765.
2272 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
2274 kes Clarify some stored/acquire messages to indicate if the
2275 problem is with read or append.
2277 kes Fix memory leak with storage ids in cats/sql_get.c
2278 kes Terminate watchdog earlier to avoid reference to released
2279 memory -- reported by Jason Austin.
2280 kes Move closing the database from jobq.c to the director daemon
2281 termination routine. This fixes memory leaks for shadow jobs
2282 (i.e. migration jobs).
2283 kes Free up the unique jobid chain items in migrate.c. This fixes
2284 a memory leak problem.
2285 kes Convert some ugly looking for statements to use foreach_alist
2286 in findlib/find.c. This will facilitate converting the structures
2287 to use dlist (for large include/exclude lists).
2288 kes Fix a bug in the btree.c and btree.h routines, then rename them
2289 rblist and add them to be built in src/lib. Include some new
2290 methods written by Rudolf Cejka that make the code more readable
2291 (hides some of the ugly casting).
2292 kes Add set_next() and set_prev() methods which make the code much more
2293 readable. Also add a new dlistString class that facilitates storing
2294 strings in dlists. To be used in the large include/exclude lists.
2295 kes Make some trivial modifications to lib/tree.h that use rblist
2296 rather than dlist for storing the tree links. This was suggested
2297 by Rudolf Cejka. The result of this is that the restore tree now
2298 uses red-black binary trees rather than simple linked lists. This
2299 should give rather dramatic speed improvements for directories
2300 contining large numbers of directories/files (more than 10000).
2302 kes Fix maxruntime bug #621.
2304 ebl Implement the include JobID in spool file name project.
2305 kes Reorder projects file in order determined by Jan 2007 vote.
2306 kes Implement item #12 on project list -- quick release of FD by
2308 kes Fix open of SQLite3 db where user does not have write permission
2309 so that DIR does not crash. Fixes bug #761.
2311 kes Add back missing @ in Win32 Makefile.
2312 kes Change 'Device not configured to autolabel' from INFO
2314 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
2315 which should restart an indefinite # of times.
2316 kes Fix configure --help to print --with-mysql[=DIR]. Same for
2317 other DIR specifications.
2319 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
2320 Fix path quoting in SQLite scripts.
2321 Fix problems with SHGetFolderPath.
2323 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
2325 kes Fix Job restart on error bug that promotes an Inc to a Full
2326 backup. This should fix bug #755.
2327 kes Add qt-console and first cut of code.
2331 kes Fix Bacula->Documentation link on Win32 to point to index.html
2332 instead of bacula.html. Fixed bug #750.
2333 kes Return JobId in db_get_job_record() when JobId==0. This should
2335 kes Do not release source pointers when restarting a failed job.
2337 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
2338 This *should* fix bug #747.
2339 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
2342 kes Modify USTORE constructor to set an empty store_source string,
2343 and don't copy the store_source string in a cancel. Hopefully
2344 this will fix Arno's seg fault, bug #744.
2345 kes Add back code to disable conio in configure. Fixes bug #743.
2346 kes Correct the Options scanner in the FD to correctly handle
2347 SHA1 option, which was eating the next option. Reported by
2349 kes Add code to indicate when the SD is spooling, spool wait, and
2350 despooling as requested by Alan Brown.
2352 Version 2.0.0 released: 4 January 2007
projects / bacula / bacula / blob