1 Technical notes on version 2.5
9 Multiple command/console per runscript
10 console command in runscript
13 State file updated on job term
16 Duplicate Job directives
17 - Allow Duplicate Jobs
18 - Allow Higher Duplicates
19 - Cancel Queued Duplicates
20 - Cancel Running Duplicates
21 Ensure they work with RerunFailedLevels
25 Improved status commands for Bat
26 Spooling/despooling status
27 Implement ftruncate for NFS devices
28 Add long term statistics job table
31 separator in console (!$%&'()*+,-/:;<>?[]^`{|}~)
36 kes Fix NULL Volume error when reading (or Migration or VBackup) must switch
37 drives when no tape is mounted.
39 kes Add additional info to some SD messages.
40 kes Add fix supplied by Martin Simmons for turning off EOL character
41 in new console multi-command code.
43 kes Fix a Verify InitCatalog problem where in certain cases
44 a garbage filename may be entered in the verification database. This
47 kes Add VSS 64 bit dll entry point in src/win32/filed/vss_generic.cpp
48 sent in by Riyas Yoosuf.
50 kes Fix seg fault in Dir during estimate command with no level value
51 given. This fixes bug #1140.
53 kes Add message to migration job when the target job is already migrated.
54 This closes bug #1129.
57 kes Raise some restore debug levels.
58 kes Replace off_t by boffset_t where ever I found it.
60 kes Define a machine dependent ioctl request type for use with
63 kes When a migration job actually runs, re-check the Job record
64 and skip if the job is already migrated. This should
65 significantly reduce the problems with bug #1129.
67 kes Set MALLOC_CHECK_=0 in environment before starting Bacula to
68 turn off glibc checks that prevent getting good dumps.
69 kes Implement console 'wait mount' command. Doesn't yet work.
70 kes Implement timeout=nn on console 'wait mount timeout=nn' command.
71 kes Break the do_swapping into do_unload, do_swapping, and
72 do_load. It is much more logical that way.
73 kes Implement a set_dcr_from_vol subroutine in acquire.c for
74 reading volumes. This allows the dcr to be refreshed after being
75 zapped when the wrong volume is mounted.
76 This should fix bug #1126 -- During multiple tape restore, bacula
77 does not ask for physical tape change, but rereads same tape
79 kes Apply patch submitted for bug #1107 with a small modification.
80 This fixes a bug where bcopy copied too many records.
81 kes Make some tweaks to bsmtp based on patch submitted in bug #1124.
83 kes Make the default bat restore Pool be Any. This fixes bug #1118.
85 kes Remove debug statement that crashes the SD at the end of
86 a tape during restore. Fixes bug #1125.
88 kes Implement Win32 bat changes made to Branch-2.4
90 kes Tweak separator command in console to start disabled and
91 allow defining no separator character. Also make code a
92 bit more fault tolerant.
93 kes Make btraceback write the traceback to the working directory
94 before attempting to mail it.
95 kes Add a RFC to Projects.
97 kes Attempt to implement a kludge to make Qt work with bat
99 kes Setup rstorage correctly. Virtual backups are working.
101 kes Move setting JobLevel and JobType into a method, which should
102 allow completing Virtual Backups.
103 kes Fix verify jobs to work again.
105 kes Virtual Backup tweaks -- it is close to working.
107 kes Ensure that SD tried to mount a volume not in an autochanger
108 at least once before asking for operator intervention.
109 kes Make SD aware of Virtual Backup jobs.
110 kes Add VirtualFull for bat.
111 kes Changes to get read storage correct for Virtual Backup.
113 kes Remove old code from label.c
114 kes Split display_display_info() out of write_bsr_file()
115 kes do_vbackup_init() working -- i.e. bootstrap file built.
116 kes Change Bacula trademark owner from John Walker to Kern Sibbald
117 kes First non-working cut of vbackup
118 kes Correct FD heartbeat code to use volatile variable accessed by
120 kes Zero thread id with memset if on Win32 in case it is a struct.
121 kes If cannot create JobMedia record, continue to try to write eof
122 and clean up in block.c
124 kes Add code to interface OpenSSL to new Win32 pthreads code which
125 used a structure for thread_t.
127 ebl tweak bat for win32 compilation
129 ebl Remove tokyo cabinet from the source
130 ebl Update configure/autoconf to support berkeley DB
131 ebl Add a sort to db_get_file_list() to improve bsr construction time.
133 kes Add a mtx-changer.conf file that is not overwritten during
134 an upgrade. It fully configures the mtx-changer script.
135 kes Clear in-use bit on vol when unused while swapping.
137 kes Remove sleep at end of ./bacula
138 kes Clear hash packet for hardlinked files correctly. This corrects
139 a long standing bug where hardlinked files selected individually
140 would occasionally not be restored.
142 kes Apply Eric's patch to ensure that autoprune does not return
143 a Volume not in the autochanger unless requested to do so.
144 kes Correct bat restore display of multiple drives. This fixes
146 kes Do find_a_volume() each time an unload is done. This
147 fixes the failure of maxvol2-test.
149 kes Add some SD debug code.
150 kes Do find_a_volume() each time an unload is done.
151 kes Apply Joao's DBI patch that adds easier configuration of DBI drivers,
152 and adds --with-db-port to ./configure.
153 kes Use Qmsg() in job.c watchdog callback.
155 kes Release main control rwlock if ABORTing.
156 kes Make watchdog connect timeout queue messages rather than sending
157 directly to avoid lock conflicts with the real thread.
158 kes Add const char in dbd.c to avoid compiler warnings.
159 kes Fix python compiler string warning. Note, IMO the GNU C++
160 compiler guys have made a *very* bad change to their compiler.
161 They now force all strings to be 'const' unless you explicitly
162 cast them, which is extremely ugly and ruins nice code as well
163 as creates a lot of useless work.
165 kes Fix mtx-changer to detect both versions of Ubuntu (Debian)
166 mt. This fixes bug #1116.
167 kes Add const in python files to reduce compiler warnings.
168 This may have to be backed out because of later compiler
170 kes Fix failure of 2drive-concurrent-test. Always read label;
171 clear_unload() only after drive is defined in acquire_for_read().
173 kes Generally clean up the manual tape loading code. The main
174 conceptual change is that when a volume is marked to be unloaded,
175 its volume name is retained, and it is only marked as unloaded
176 when either the autoloader says it is unloaded or another tape
177 is read on that drive.
179 kes Add debug code and refactor subroutine in stored/mount.c
180 kes Fix format problem in bscan output reported in bug #1105.
181 ebl Fix get_next_volume_for_append logic with autochanger
182 - use pruned volumes if found
183 - don't reset the inchanger flag after getting a recycled volume
185 Fix recycle_oldest_purged_volume to take InChanger flag in account
187 ebl Add mmap/unmmap implementation for tokyodbm under win32
189 kes Make first step toward eliminating globals from config
190 scanning. Also should be a workaround for FORTIFY_SOURCE
191 GNU C bug -- fixes bug #1042.
193 kes Apply duplicate job tests to restarted jobs.
194 kes Copy more data when restarting a job so that run
195 overrides are kept. This should fix bug #1094.
197 kes More word alignment cleanup.
198 kes Fix bug where SD did not ask operator if the device could not
199 be opened. Reported by Eric.
201 kes Add dbuser to DIR conf file (replaces user).
202 kes Add --with-db-password to ./configure
203 kes Fix regress to handle db_password.
204 ebl Add new "status storage slots" that list autochanger
206 ebl Update vtape driver to compile only under Linux.
207 ebl Fix a bug when restoring with a wrong mediatype.
209 kes Eliminate ints from conf files and structures to avoid
210 word alignment problems
212 kes Fix bug reported by Scott Barninger where the bacula script
213 refers to scripts in the wrong directory. Needed to meet the
214 requirements of recent FHS location changes.
215 ebl Disable vtape for FreeBSD.
217 ebl Modify disk-changer to check if slot contains something before
220 ebl Fix vtape on win32 and debian.
221 ebl Fix autoselect patch (cause segfault).
223 ebl Fix autoselect option broken for a while. Fix #1089. Need some
224 work with StorageId to be able to use a particular drive in a
227 ebl Rename vtape to vtape.
228 ebl Update vtape driver.
230 ebl Modify vtape driver to avoid sparse file.
231 kes Add make clean of qt-source directory during ./configure
232 kes Store last block number written to tape in DEVICE and
233 use it for testing for correct last block on EOT.
235 Release Version 2.4.0:
239 kes Make sure to clear JS_WaitMedia when operator mounts a Volume.
240 This fixes bug #1095.
242 kes Add create_postgresql_database.sql to Win32 installer. Should
243 fix problem reported by Juilio Monteiro.
244 kes Get correct slot when auto unloading a device. This fixes bug
247 kes Fix multiple media restore.
248 kes Make DEVICE Slot private and access it via a method.
249 Allows better control over when it is set and cleared.
250 kes Fix possible seg fault if SQL error.
252 kes Add Martin's fixes to argument scanning for the estimate
253 command. This fixes bug #1093.
254 kes Add debug code to SD.
255 kes Fix renaming a Volume, which used the wrong Volume name.
257 kes If operator has rewind tape, print warning, release tape and
258 try once more. If tape is positioned somewhere, something went
259 wrong, so mark the tape in error and try once more. Previously
260 this error was fatal, now it produces an error message.
261 kes Ensure correct volume name displayed during restore
262 kes Ensure that Volume is mounted for restore.
264 kes Fix a few more Coverity reported problems.
266 kes Apply Allan Black's status dir job count patch.
267 ebl Add information about IMPORT/EXPORT slots in mtx-script.
268 kes Enhance a couple of SD debug messages.
269 kes Tweak unload flag setting and ensure it is set during swap.
271 ebl Fix #1091 about bad output in estimate command.
273 kes Modify autochanger locking to attempt to avoid race
275 kes Make sure device not busy before doing label command.
276 kes Display open() errors except when polling. Previously too
277 many were suppressed. This should fix bug #1070.
278 kes Fix Win32 reparse points. Bacula will not recurse into any
279 reparse point directory, including mount points, unless the
280 directory is explicitly mentioned at the top level (same as
281 with Unix). A file that is linked to another file will be
282 backed up -- much as Unix does for hardlinked files.
283 This fixes bug #1041.
285 kes Remove double quotes from ChangeLog and ReleaseNotes
286 kes Remove StorageId test when pruning and recycling (Eric's changes).
287 kes Remove old form of locking when getting volumes -- causes deadlock.
288 kes Change bat dirstat layoutWidget to dirstatlayoutWidget to make
289 the name unique and to eliminate compile time error.
290 kes Add accurate.o to Win32 FD Makefile
292 kes Fix cats dll build on Win32 after db_update_job_end_record
293 calling sequence change.
294 ebl Switch to tokyo dbm instead of htable in accurate code
295 ebl Include tokyo dbm to bacula source tree
297 kes Fix buffer overruns detected by Coverity.
299 kes Tweak joblog display.
301 kes Implement --without-qwt
302 kes Fix layout of restore tree dialog
303 kes Add configure bat QWT libraries, so that bat can be built
304 with or without the QWT libaries.
306 ebl Add dummy tape driver for regression tests.
307 kes Make sure we unload the right slot when swapping.
309 kes Add debug times, reduce size of two-pool-changer test
311 ebl Tweak autoconf scripts for vtape
313 kes Improve SD reserve debug code.
314 kes Testing an improvement to free up volumes no longer in use.
316 kes Rework SD acquire for read to handle autochanger Volume
318 kes Implement regression that explicitly tests swapping a Volume
319 from one drive to another.
320 kes Enhance disk-changer to detect most error conditions.
321 kes Fix SD code so that it properly swaps a Volume between drives.
322 This fixes bug #1083.
324 kes Apply libdbi patch from Joao Freitas for regress and for
325 Bacula trunk. Regress now works with libdbi. Nice.
326 kes Apply .nobackup patch from bug #1077 submitted by
328 kes Apply Bastian Friedrich's patch that adds %p to edit the pool
329 name into jobs cloned via the run directive.
331 kes Prevent a Volume that is being swapped from being freed from
332 the volume list. This will most likely fix, at least partially,
334 kes Fix strippath so that it does not get a buffer overrun and crash FD.
335 This fixes bug #1078.
336 kes Remove 50 millisec wait in SD that broke debugger.
337 ebl Add MaxRunSchedTime option that specifies the maximum allowed time
338 that a job may run, counted from when the job was scheduled.
339 ebl Fix MaxWaitTime option that specifies the maximum allowed time that
340 a job may block waiting for a resource, counted from when the job starts
341 ebl Rename (add) Max(Incr|Diff|Full)WaitTime to Max(Incr|Diff|Full)RunTime
342 kes Apply patch from bug #1076 by Tullio Andreatta <t.andreatta@troppoavanti.it>
343 that implements multiple commands per line in the console when using
344 readline. Modify the default to use a semicolon as the command separator.
346 ebl Fix SQL query in migration code.
347 ebl Make accurate mode with hash disk pass regression tests
349 ebl Implement first cut of accurate backup with hash disk.
351 kes Force unload of volume when wrong volume mounted in SD.
353 kes Fix bat seg fault at termination.
354 kes Add Bacula generated version to bat about box.
357 kes Experiment with allowing multiple read jobs.
358 kes Move final volume swapping code to DCR method and
359 call it from acquire_for_read().
360 kes When wrong volume is mounted during read, unload_autochanger.
362 kes Integrate the libdbi changes from Joao Henrique Freitas
364 kes Stop searching for Volumes in SD askdir if DIR returns the
365 same volume name twice in a row.
366 kes Close bat console windows first to eliminate error message
369 kes Tweak the swap Volume from one drive to another code so that
370 it now seems to work.
371 kes Resolve several problems with recycling that broke the new
372 code (these problems are in 2.2.9 as well).
373 kes Remove the volume lock when calling the sysop code.
374 kes Don't mark a reserved volume with no writers as unused otherwise
377 kes Rework class structures for VOLRES, DCR, and DEVICE to make
378 the method names a bit more logical, and for more logically
379 handling the responsibilities.
381 kes Remove redundant code in terminating the scheduler that just
382 causes a seg fault in many cases.
383 kes Cleanup releasing a volume and make it a DCR method.
384 kes Improve algorithm for detecting pre-reserved volume and
387 kes Tweak volume swapping code so it works.
388 kes Correct name overloading in mount.c
389 kes Replace released flag in VOLRES with reserved and add access
390 methods for the VOLRES class.
391 kes Prevent volume from being released while being swapped.
392 kes Apply Bastian Friedrich's edit codes patch for the bpipe-fd
394 kes Apply Bastial Friedrich's edit pool=%p patch for run clone
396 kes Refactor parts of stored/mount.c
398 ebl Add sanity checks for VolWriteTime and VolReadTime
399 ebl Take care of bad clock changes while computing VolWriteTime
400 and VolReadTime. This should fix or limit #1066
401 kes Correct error string numbers in dird/catreq.c
402 kes Restructure reserving, acquiring, and mounting volumes. Calls to
403 autochanger are deferred for mount.c -- simplifes the code.
405 kes Do not prune any running job. It just fails the job.
406 kes Lock the volumes when changing dev->reserved_device and marking
407 the volume unused otherwise the device can get reserved by
408 another job before the volume is released, thus blocking it.
410 kes Correctly detect Ubuntu systems, and add ubuntu platform directory.
411 kes Fix bug #1063, reuse of freed ptr in list nextvol.
412 kes Release regex compile buffer in filed/job.c
413 kes Add proper type of const char in sql_create.c
414 kes Turn off debug in daemon termination routines
415 kes Move free_volume_list() before devices are freed in stored.c
416 kes Fix reference to uninitalized stack variables in bregex.c.
417 This should correct bug #1067.
419 kes Fix possible seg fault in SD when freeing a volume entry.
421 kes Implement unload_dev() before swap device.
422 ebl Add statistics prunning with option and menu
423 kes Separate unload_dev() from unload_other_device() in autochanger.c
425 kes Apply patch from bug #1069 that corrects spurious error messages
426 when ACLs enabled on SGI but no ACL exists.
427 ebl Fix small segfault in bacula-sd when debug level is 500
428 kes Modify run_program() and run_program_full_output() to use
429 call by reference for the results string. This corrects a long
430 standing problem where the address of the string may be changed
431 in the subroutine but not in the calling program.
433 kes Re-enable code to remember last volume mounted on a non-tape
435 kes Add patch supplied in bug #1068 that fixes a SD crash when using
436 a Virtual autochanger.
437 kes Generate correct JobMedia records during spooling/despooling when
438 running concurrent jobs. Thanks to Tom Ivar Helbekkmo
439 <tih@hamartun.priv.no> for excellent analysis and testing.
441 kes Tweak hash algorithm for htable using Martin Simmons idea
442 for doing a circular shift.
443 kes Remember what volume is in VTLs (previously turned off for
445 kes Analysis of JobMedia records by Tom Ivar Helbekkmo <tih@hamartun.priv.no>
446 pointed out some problems in creating JobMedia records during
447 spooling with concurrent jobs. Fix the problem by updating the
448 start file position before despooling and generate a jobmedia
449 record at the end of despooling.
451 kes Fix handling of JobMedia records during spooling and when a
452 Volume is changed without actually writing data to the Volume.
454 kes Rework certain SD locking based on gdb tracebacks of deadlocks
455 sent by Eric. This code now uses only the volume_lock() rather
456 than the reservations lock when at EOM and acquiring a new
458 kes Ensure only one exit point in several subroutines.
460 kes Implement bsock code to permit locking. Use the new code in Verify
461 in the FD to prevent the heartbeat thread from disrupting the Verify
462 data sent to the Dir.
463 kes Modify SD locking to eliminate locking the reservations system from
464 outside the system. Use the volume lock when getting media data
465 and reserving a new volume at end of media.
466 kes Add Eric's volume_unused() fix to stored.c so that Volumes found
467 when SD starts are not locked into place.
469 kes Fix error compiling runscript code on 64 bit machines.
470 kes Tweak Win32 mount point code.
471 kes Fix a couple of bugs in the accurate code (bad sscanf, buffer not
472 cleared giving bad file estimate).
473 kes Implement BIG_MALLOC in htable code. Runs 2.5 times faster for
476 kes Keep Schedule run lists in order as suggested by
479 kes Implement autostart scripts for Debian.
480 ebl Implement upgrade catalog scripts.
482 ebl Apply jobstat patch for long term statistics. Have to implement
483 purge stats command and upgrade scripts.
484 kes Fix mtx-changer.in for broken Debian mt program.
486 kes Fix large number of JobMedia records reported by Eric Bollengier.
488 kes Apply doc fix from bug #1062.
489 kes Resolve crash and improper restore wx-console Win32 restore
490 GUI. Fixes bug #1065.
491 kes Update Win32 wxWidgets to latest version.
492 kes Attempt to do correct handling of Win32 mount points. Should
494 kes Fix Win32 FD backup/restore memory leak due to improper termination
495 of BackupRead/Write. This fixes bug# 1038.
497 ebl Reduce memory usage for accurate backup, working only with ctime
498 and mtime. (not all Lstat field)
499 About 40MB for my Linux system (400.000 files)
501 kes Add dcr->reserved_volume flag that allows us to release a volume
502 even if it is not vol->released. This allows maxvol2 to work when
503 Volumes expire and we are already writing to the device (i.e. a
504 volume is pulled out from under us by another job terminating after
505 we reserve the drive).
507 ebl Permit multiple command/console per runscript definition.
508 RunScript { command = /bin/true ; command = /bin/false ... }
509 ebl Add RunsWhen = AfterVSS to runscript. You can execute a command
510 (restart an application) just after the VSS snapshot on windows.
511 kes Don't zap dcr values during release_volume() as they might
512 have the next Volume to be mounted.
513 kes Fix AIX prototype.
515 kes Second cut of drive switching during backup.
518 kes Update Win32 version of wxWidgets to most recent version.
519 kes Tweak Copy job details.
520 kes Rework dir_find_next_appendable_volume to make a bit more effort
521 to find a suitable volume before giving up.
523 kes Make ask_sysop_to_create... to return if waken from wait.
524 This helps get out of blocked conditions.
525 kes Experimental implementation of switch_device in reservations.
526 kes Implement FD version to allow easier protocol changes.
527 kes Add Plugin Options string -- not yet passed to FD.
528 kes Implement PluginOptions ACL.
530 kes Attempt to correct problems with restores with autochangers and
531 use counts going negative
532 kes Rework SD status command and implement API for bat. Implements
533 header, runing waitreservation, devices, volumes, spooling,
534 and terminated status keywords.
535 .status storage=xxx <keyword>
536 kes Clarify TLS error message by adding double quotes around name.
537 kes Simplify SD/FD status code by putting api flag in STATUS_PKT
538 kes Pass jcr to tls routines so debug messages can be handled better.
539 kes Rework jobq resource allocation code, and possibly fix a bug
540 that caused reference counts to get out of sync.
542 kes Rename fd/dir plugin to use Bacula standard underscore.
543 kes Plugin work -- bring dir up to fd level.
544 kes Start implementation of VTL code
545 kes Fix Win32 build after adding new cats subroutine.
547 kes First cut at Duplicate Job implementation.
549 kes Fix bugs in MaxFullInterval and Implement MaxDiffInterval.
550 kes Start PluginOptions string, and refactor a bit of ua_run.c
551 ebl Apply Allan patch that permit to reset recyclepool.
553 kes Test patch -- possible fix or improvement for bug #1053
554 kes Refactor FD and SD status commands to permit new API code in
555 SD, and to fix Win32 build.
556 kes Win32 build is now working.
558 kes Implement 'MaxFullInterval' and start 'MaxDiffInterval' based on
559 some ideas in patch from Scott Bailey.
560 kes Begin implementation of duplicate Job control.
561 kes Fix some of Win32 build after recent additions.
562 kes Apply patch from Frank Kardel that implements 'honor no dump flag',
563 which causes the FD to detect whether or not the OS has the
564 honor no dump bit (*BSD systems), and if so, to skip backing up
565 any file with this bit set. The feature is enabled by setting
566 'honor no dump flag = yes' in the Options section of a FileSet.
568 kes Correct po warning message with datarootdir
569 kes Implement more code in dird.c to put configuration parsing in
570 a class rather than use globals.
571 kes Restructure SD status command for implementation of bat API
574 kes Suppress incorrect 'Will not descend from x into y' messages.
575 kes Eliminate FORTIFY_CODE=2 bug, and make first cut at removing
576 daemon globals used by parser.
577 kes Apply Joao's patch to separate DB_TYPE and DB_PROG in configure.
579 kes Fix free of plugin_list when none exists.
581 ebl Apply accurate project patch.
583 ebl Fix a segfault when using strip_path option. (Use of pm_strcpy
584 on non-mempool object)
585 kes First cut of converting FD .status to work with bat API.
587 .status client=XXX header
588 .status client=XXX running
589 .status client=XXX terminated
590 kes Implement first cut of Copy Job.
591 kes Implement Catalog in Pool resource. It overrides catalog specified
592 in the Client resource.
594 kes Apply patch (with some difficulties) from Joao Henrique Freitas
595 <joaohf@gmail.com>, which adds support for libdbi as a Bacula
597 kes Add patch from Martin Schmid scm@apsag.com that checks to see if
598 ftruncate() actually works. In the case of some (cheap) NAS devices,
599 it does not, and so recycling NAS Volumes does not work. The code
600 simply unlink()s the file, then recreates it. This fixes bug #1011.
602 kes First incomplete cut of big malloc blocks for htable.
603 kes Tweak plugin code.
605 kes Plugin debug code + tweak a couple bat dialog layouts
607 kes Fix creating first JobMedia record during Migration to include
608 proper index. This caused slow restores of migrated jobs.
609 kes Temp fix to plugin name file_index.
610 kes Bacula backed up and restored a MySQL database.
612 kes Implement plugin restore.
613 kes Implement parsing of db_driver to give db_type index.
615 kes First cut of plugin restore code.
616 kes Fix bug #1047, which had a heap overrun when stripping certain paths,
617 and do not strip paths on symbolic links.
618 kes Set catalog backup database and user name from values specified on
619 the ./configure line.
620 ebl Fix #1031 about wrong pool source information in job report.
623 kes Remove a redundant jcr argument to find_files, match_files, and
625 kes Implement '.status dir header|scheduled|running|terminated' that
626 prints the requested status section. With the exception of the
627 header, the other reports have fields separated by tabs (\t).
629 kes Apply patch from Peter Much <pmc@citylink.dinoex.sub.org> that fixes
630 a resource embedded run command to find a since time if no explicit
631 since time was supplied on the command line.
632 kes Apply state-file.patch sent by Allan Black <Allan.Black@btconnect.com>
633 that updates the state file at job termination time in addition to
634 when the daemon terminates.
636 kes First version where a plugin did a backup.
637 bpipe-fd.so created a backup file, wrote a test
638 string to it, and Bacua could restore this fabricated file.
640 kes Implement DB Driver = string for the DBI driver.
641 kes Remove all old bdb_xxx.c code. Add dummy routines to bdb.c
642 kes First cut of code for loading Win32 plugin dlls. Implement
643 dlopen, dlsym, dlclose, and dlerror in src/win32/compat/compat.cpp
644 and implement a dlfcn.h file based on opengroup's definitions of
647 kes First cut plugin directives.
649 kes Apply patch from bug #1049 to prevent stripping the path on a
651 kes Attempt to fix bug #1047 where stripping a path corrupts the
652 heap. Waiting for feedback.
653 kes Correct the Mount message not to suggest labeling a new tape
654 when doing a restore. Submitted by email by John Stoffel.
655 kes Attempt to work around gcc FORTIFY_SOURCE bug that crashes the
656 FD by using casting. Reported in bug #1042.
658 kes A bit of crypto cleanup. More later.
660 Release Version 2.2.8
662 kes Apply patch from Martin to correct bug #1040, bscan sets existing
664 kes Fixed important spelling error in doc -- bug #1045.
666 ebl Fix bextract to be able to extract non-portable Win32 data to
668 kes Move initialization of read/write res lock earlier in the code.
669 This fixes the crash with a null conf file. This fixes bug
671 kes Redefine CURES in lib/parse_conf to be URES and move it all
672 into lib/parse_conf.c -- this responds to bug #1042, but does
673 not fix it. The fix is not to compile with FORTIFY_SOURCE.
674 kes Backport to 2.2.8 fix de-referencing a NULL pointer in the scanner from
675 the trunk SVN. I don't think this was reported as a bug.
677 ebl Fix a bug during tape initialization with MTSETDRVBUFFER.
679 kes Fix Win32 build with new .def files and DLL_IMP_EXP ...
681 kes Add DataDespooling and DataCommitting status (committing is
682 the last despooling).
683 kes Finish implementation of new reservations code noted below.
685 kes Fix bsnprintf for float point numbers. I broke recently when
686 parameterizing some variables. This fixes bug #1036.
687 kes Undo recent reservations changes ... will apply them later
688 when they work better.
690 ebl Fixes #1034 which cause mysql to hang the connection after 8h
691 ebl Change default statistics target of filename.name and path.path
692 fields for PostgreSQL. This speeds lookup by indexes. Thanks
694 kes A few more tweaks to new reservation code. Make sure to clear
695 vol released flag when retaking volume. When reading label and
696 label is bad mark volume unused. When recycling, mark volume
697 unused so it can be renamed.
699 kes Fix reserve_volume() so it doesn't release a volume in use
700 (i.e. a volume entry not marked released). This should be
701 the last part needed to fix bug #1018.
703 kes Move Heartbeat documentation from Job to Director resource.
704 This fixes bug #1033.
706 kes Fix existing switch drive SD code to call autochanger to release
707 any old volume. This must be done to keep the autochanger from
708 releasing subsequently newly reserved volumes in doing a close().
709 This should fix bug #1018.
710 kes Fail if attempting to get console input in batch mode. This
711 should help fail RunScript console commands that are incomplete.
712 kes First cut implementing switch_drive() in SD (not actually called).
714 kes Implement first cut running console commands in a RunScript.
716 ebl Fixes bug #1028 where 'Selection Type' option was not usable
718 ebl Fixes bug #897 and bug #1005 where bacula doesn't display runscript
721 Release Version 2.2.7
723 kes Add new free_tls() entry point so that Win32 builds.
724 kes Fix compile warning in src/lib/util.c
725 kes Fix entry point for edit_job_codes() so that Win32 builds.
726 kes Fix seg fault Frank Sweetser reports in regression testing
727 on his systems. The problem was that the original author of
728 bsnprintf.c did not take into account the side effects of
729 using ++x in the argument to a #define.
730 kes Make SD protocol backward compatible with version 2.2.x.
732 ebl Fixes bug #1015 where bacula failed to restore acl to a socket
733 because Bacula no longer restores sockets.
734 ebl Always use ignorecase fileset option on win32 FD.
736 kes Apply patch from Michael Stapelberg <michael@stapelberg.de>
737 that implements double quoting include names in conf files,
738 and also allows piping input by having the first character
739 be a vertical bar (|).
740 kes Apply patch from Bastian Friedrich <bastian.friedrich@collax.com>
741 that implement %f in RunScripts to pass the FileSet name.
742 kes Skip leading | when lex input comes from a pipe as suggested
743 by Michael Stapelberg <michael@stapelberg.de>.
745 kes Apply patch for bsmtp Win32 daylight savings time fix supplied by
746 Nerijus Baliunas <nerijus@users.sourceforge.net>
748 kes Implement Plugin Directory and plugin events.
750 kes Implement a security enhancement: TLS authentication but no
751 encryption. Enabled by setting 'TLS Authentication = yes'.
752 Note when this is on, TLS encryption is turned OFF!
754 kes This patch corrects a problem where the maximum concurrent storage
755 jobs counter gets out of sync during restore jobs causing jobs to
756 'wait on max Storage jobs'. This patch fixes bug #1009.
758 kes This patch fixes bcopy so that it produces correct Volumes.
760 kes This patch eliminates spurious output to the console during a VerifyVolume
761 job that contains encrypted data. It fixes bug #1024.
763 kes This patch prevents the 'status dir' command from trying to use a scratch
764 volume and possibly moving it from one pool to another. This patch fixes
767 kes Add new include to postgresql.c suggested by Marc Cousins so
768 that it compiles correctly with pgre version 8.3.
770 kes Fix --archivedir addition to configure. Replace it with
771 --with-archivedir in configure.in This fixes the regression
773 kes This patch fixes bug #1012 where the job is canceled because
774 of Max Run Time exceeded when the job has not yet started.
776 ebl Apply Richard Mortimer patch that fixes #1016 when there are more than
777 one 'part' to write. Instead of each part being stored on disk,
778 written to DVD, then deleted from disk, all parts are written to disk,
779 and only the last is written and deleted from disk.
780 kes This patch fixes the status command to include the formating string for
781 JS_AttrInsterting. It fixes bug #1021.
782 kes This patch should fix the Mac OS X build problem on the latest
783 Darwin, where sys/types.h was not included correctly (apparently
784 due to a change in the Mac headers). The solution was to explicitly
785 ensure that it is defined for the ./configure.
786 This patch also has a rebuild of configure that includes the Debian
787 qt4 patch to check for qmake-qt4. This patch fixes bug #1020.
788 kes This patch should ensure that queued messages to the console are
789 displayed as soon as possible. It should fix bug 1007, but has been
790 reported not to work.
792 kes This patch fixes the infinite loop when trying to increase the
793 maximum number of volumes in a Pool during the add command.
794 This patch fixes bug #1008.
796 Release Version 2.2.6
798 db Remove extra data on estimate command in joblist for bat.
800 kes Cleanup of code in SD that sets the LastWritten date. This doesn't
801 really change anything, but is the beginning of doing it *right*.
802 To do it completely right the LastWritten date must be passed to
803 the SD, but it is not yet done.
804 kes Minor tweaks to some bat restore SQL.
805 kes This patch fixes bug #1003 where putting the message output from
806 a Verify job into the catalog results in a recursive loop. The problem
807 seems to show up only with postgresql (to be verified).
808 kes Correct %x to %p in postgresql debug statement.
810 kes Fix bug #942 where lots of emails where generated when the heartbeat
811 interval was low and Bacula wanted a different tape from the one in
814 ebl Add new SD despooling attributes and Dir inserting attributes
815 job status codes in the catalog (Status table).
817 ebl Use qmake-qt4 instead of qmake when available (debian system).
819 kes Add a security warning to src/cats/make_catalog_backup.in indicating
820 that passing the password via the command line (arg 3) is insecure.
821 This responds to bug #990 (it doesn't fix it).
823 kes Set default debug_level to zero. This corrects bugs #991 and #993.
824 kes Fix a crash in bat when it cannot connect to the Director for example
825 if the Director is not running.
826 kes Remove redundant INDEX (JobId) from File table in the trunk.
828 kes Make explicit exception to GPL in LICENSE to permit linking
829 the Win32 FD with Microsoft VSS code.
830 kes Apply the Solaris package patch from
831 Masopust, Christian <christian.masopust@siemens.com>
832 kes Apply the patch to optionally add a timestamp in the debug output
833 submitted by Mariusz Czulada <manieq@wp.eu>.
835 ebl Use PQerrorMessage instead of PQresultErrorMessage in postgresql
836 backend (sql_strerror). Fixes bug #989
838 kes Apply Michael Short's <mdshort@gmail.com> Win32 regress patch.
839 It applied with no problems.
840 kes Add PATH command to SunOS part of mtx-changer.in so that sed and
842 kes Redirect stderror to stdin on mt status command in mtx-changer.in
843 since the status is returned on stderr on Solaris.
844 kes Activate Close button on tray-monitor window. This fixes
846 kes Check for NULL item in parse_conf.c before calling it. In the
847 case of Device, there is no item and this caused a seg fault when
848 Device appears in the conf file.
849 kes Add a #define __CONFIG_H when including config.h in bacula.h. This
850 avoids pulling in config.h multiple times in some new code.
852 kes Fix spurious warning message printed when creating a volume with
853 a LabelFormat. This fixes bug #976.
855 Release Version 2.2.5
857 kes Add JobId in place of Job name in all the Jmsg() output.
858 kes Correct the APP_DESC for the Win32 storage service (remove an e).
860 kes Make maxvol-test and new more strict maxvol2-test work.
861 kes Print JobId in all Jmsg() job output.
863 kes Add new SD despooling attributes and Dir inserting attributes
864 job status codes. This fixes bug 961.
865 kes Fix Win32 drive display in bat version browser. Fixes bug #962.
867 kes Fix doc issue. This fixes bug #963.
868 kes Fix listing performance problems in bat. Pointed out by
870 kes Remove old debug code.
871 kes Fix bat code that tests for Win32. This should fix bug #968
872 kes Query 5 list wrong Vol after migration. This fixes bug #960
874 ebl Fix #969 where user can't change Replace option in restore menu.
876 kes Save jcr in thread specific data (tsd) for each thread.
877 kes Make Dmsg() print JobId as -%u.
878 kes Make Jmsg, Emsg, and others automatically pickup the jobid
879 for the thread if it exists.
880 kes Remove old reservation debug jid code.
881 kes Remove get_jcr_from_tid() from OpenSSL and tls code.
882 ebl Add an option that permit to specify spool size in job
883 definition. (Applying patches/testing/spoolsize_per_job.patch).
884 You must upgrade SD and DIR at the same time.
885 dvl Add new configuration item --archivedir
886 dvl Adjust regression tests to use tmp not /tmp. This will allow
887 multiple concurrent runs of the regression tests.
889 kes Fix race condition that drops final block written to volume.
890 This happens in rare cases with multiple simultaneous jobs
891 when the Volume fills. This fixes bug #964. May be related
892 to bug #935 and possibly #903.
893 kes Eliminate more strerror() and replace with bstrerror().
894 kes Remove BSD getopt and replace with unrestricted IBM version.
895 kes Fix Win32 build for changed calling sequences.
896 kes More tweaks to the mount volume routines to get everything
897 right. Changed variable name from find to have_vol, which is
898 much easier to understand.
899 kes Enhance btimer debug code.
901 kes Fix FD->SD authorization failure, which was due to spurious
902 wakeups from a pthread_cond_timedwait(). Simply check the
903 predicate before continuing. This fixes bug #953.
904 kes Add const char where needed (more to do). Remove temp debug code.
906 kes Setup SQLite busy handler before doing queries. Fixes bug #967.
907 kes Don't overwrite error message in check_tables_version.
909 kes Unlock batch insert tables with same calls used elsewhere.
910 kes Allow starting 59 jobs a second.
911 kes Make SD session key more random.
912 kes Add retry for SQLite opening db if it fails. Probably helps
914 kes Suppress extra error messages during batch insert failure.
916 kes Add jcr to timer packets so if killed message can be sent to job.
917 kes Add JobId to all Dmsg() output.
918 kes Put some FD auth code on dbglvl rather than fixed.
919 kes Return insert attributes error message in db msg buffer to avoid
920 false error messages. Helps fix bug #966.
921 kes Separate batch init error messages. Probably helps fix bug #966.
922 kes Make SD code that contructs attribute insert check string lengths
924 kes If Dir gets an error during inserting attributes, cancel SD.
925 This reduces unnecessary error messages.
927 kes Correct search boolean for getting Volume info
928 ebl Cleanup batch insert code. Probably fixes bug #965.
929 kes Back out one small change to the reservation system (reserving a volume).
930 kes Rework how a Volume is mounted. It is now much more intelligent and
931 will always attempt to use any mounted volume if possible and reduces
932 calls to the Director asking about volumes.
934 kes Turn off some code when batch insert not enabled.
935 kes Edit FD name in connect error messages.
936 kes Rework the reservation system to take into account that the Director
937 might give us a Volume that is different from the current one being
938 used, and to ensure that we don't exceed Maximum Volume Jobs.
939 This fixes (mostly) bug #947 ' Maximum Volume Jobs = 1 produces
940 fatal error with multiple jobs running'
941 kes Add more debug code in reservation system.
942 kes Implement maxvol-test to check bug #947.
944 kes Add code to handle tray monitor separated from Win32 FD.
945 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
947 kes Add missed return in fixing verify bug -- trunk only.
948 ebl Fix a command parser issue causing a director segfault.
949 kes Fix ANSI tape labeling. Fix restoring ANSI labeled Volumes.
951 kes Increase the max block size to 4MB fixes bug #957.
952 kes ERABT if user sets min block size > max block size. Fixes bug #956.
953 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
954 is not properly mounted (recognized) during a poll.
955 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
956 Job that has differences reports Verify OK.
957 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
959 ebl Add an option to operate on all pools with update vol parameters.
960 This complete the project 20. Patch from Nigel Stepp.
961 ebl Add history support to bconsole when using readline.
962 Using Ctrl-D to exit doesn't update .bconsole_history
963 kes Modify new volume algorithm to use max MediaId for generating next
964 volume number rather than the count of Volumes. This should essentially
965 eliminate the failure rate if some volumes were deleted. Bug #921.
966 kes Begin implemention of Optimize Job Scheduling.
967 kes Implement restore callback that Dirk and I agreed on for bat
968 restore. This fixes bug #928. Restore of backup of zero files fails.
969 kes Fix SQL Catalog logging which broke with new db_escape_string
972 Release Version 2.2.4
974 kes Fix bacula_cats.def for new db_escape_string().
975 kes Increase size of name string when FD making connection to SD.
976 May fix bug #953. FD->SD connection failure.
978 kes Add code to help Dan debug 2drive-incremental-2disk test.
979 kes Add code to try to fix bug #908.
980 kes Add waits to multiple exit detection code to try to force pid
981 file to always be deleted.
982 kes Restore good dev.tar.gz to rescue set appropriate binary property.
984 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
985 trying to switch drives by checking for blocking before unblocking.
987 kes Cancel storage daemon in all cases where FD reports error. This
988 should fix virtually all cases of bug #920.
989 kes Fix db_escape_string() for MySQL which did not compile.
991 kes Fix error message that was clobbered when Dir tells SD it does not
992 have write permission on Volume. This should fix a minor point
993 in bug #942, but not the main problem.
994 kes Add code to cancel job in SD if FD connection fails. This should
996 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
997 dvl Pass jcr and db into db_escape_string() to enable better escaping
999 kes Fix migration code to get correct Volume name with multiple volumes
1000 by skipping |. Fixes bug #936.
1001 kes Implement patch supplied by Landon to fix bug #944 where using
1002 TLS with bconsole uses 99+% of the CPU.
1003 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
1005 kes Move patches into patches directory.
1007 ebl Fix bug #946 about 'bacula-dir -t' which doesn't works
1010 ebl Using 'm' in bconsole will show messages like before,
1011 and not memory usage.
1012 kes Fix bug #935, and probably also bug #903 where files were not
1013 restored. MediaId was not properly set in JobMedia record after
1016 kes Suppress chown and chmod error messages if the FD is not running
1019 kes Apply Martin Simmons' patch that should turn off the new API usage
1020 when batch insert is turned off allowing building on older
1022 kes Add ./configure search in qwt-qt4 for qwt package
1024 kes Bacula is now free of 3rd party GPL copyrighted code!
1025 kes Remove idcache.c
1026 kes Add guid_to_name.c/h which replace idcache.
1027 kes Remove enh_fnmatch.c. Make code that references it use fnmatch.c
1029 ebl Detect if new PosgreSQL batch insert API is present.
1030 kes Correct incorrect mempool call causing Director crash. Occurs on
1031 systems without va_copy().
1032 sb Update spec files for 2.2.1 release
1034 kes Fix memory pool call in ua_output.c. bug #934.
1035 kes Replace fnmatch.c and fnmatch.h by modified BSD versions.
1036 Add test program to fnmatch.c
1038 kes Integrate patch to README.vc8 from
1039 Hederer Jean-Sébastien <hedererjs@asperience.fr, had to manually
1040 edit it to get it into Unix patch format.
1041 kes Implement mkpath.c to replace old FSF makepath.c
1043 kes Implement savecwd.h and savecwd.c. Remove FSF versions.
1045 Release Version 2.2.1
1047 kes Update POTFILES.in
1048 kes Cleanup a few underquoted AC_DEFUNs in configure
1049 kes Apply patch from Martin Simmons that adds a test for va_copy to
1052 kes Fix bug #921 by increasing the number of tries to create a new volume
1054 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
1055 can be called multiple times. Implement a version for machines
1056 without va_copy() that gets a big buffer.
1058 kes Integrate more portable zone offset code into bsmtp.c
1059 Submitted by Attila Fülöp.
1061 kes Fix bad SD->FD return status reported by
1062 (James Harper) <james.harper@bendigoit.com.au>
1063 ebl Fix a bug in read_close_session which return random status
1064 thanks to James Harper
1066 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
1067 and directory names during restore of single file/directories.
1068 kes Add sanity checks to .sql command when string is empty. Hopefully
1069 that will resolve Dirks Director crash.
1071 kes Apply patch submitted by Martin Simmons that corrects a seg fault
1072 in the bsmtp chat subroutine when debug is >= 10.
1074 kes Fix Director crash when running bat SQL queries.
1075 kes Add David's notes on Item 8: Copy pools.
1077 kes Rework projects file to be current and ready for a vote.
1078 kes Enhance lex scanner error message.
1080 kes Tweak LICENSE file to mention BSD code.
1081 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
1082 if specified on the ./configure.
1083 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
1084 This class is intended to allow us to open a second bsock to the
1085 Director while in the restore subdialog.
1087 kes Fix configure to create bat Makefile before creating dependencies.
1088 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
1089 kes Add a tooltip to the tray monitor.
1090 dvl Set the Director's PID file before dropping privs. This fixes
1093 kes Update AUTHORs file
1094 kes Increase the default max concurrent jobs to 20 in FD and SD to
1095 correspond with the default .conf files.
1096 kes Rewrite the Win32 service routines. This eliminates the 3 copies
1097 some different, of the same file created by RN when porting the
1099 kes Rearrange some of the Win32 directories and the placement of the files
1101 kes Set DEVELOPER flag in version.h
1103 ========================================================================
1104 Release Version 2.2.0
1106 kes Apply a second doc patch from Marc.
1107 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
1108 improves the tips section that discusses how to setup multiple
1111 kes Update bat README file.
1112 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
1113 corrects a typo in the Recycle status check in db_find_next_volume().
1114 This will probably fix a number of annoying problems with multiple
1116 kes Modify most of dird/msgchan.c to use bsock class calls rather than
1117 bnet calls -- no functionality change.
1119 kes Modify the Verify output to specify if files are missing on
1120 the Volume(s) or disk. Fixes confusion in bug #916.
1121 kes When more than one Volume is read in a migration job, the last
1122 Volume bytes reported are from the last read volume rather than
1123 the last written volume. Fixed. This fixes bug #910.
1124 kes Fix display of Recycle flag after update volume=foo recycle=yes.
1125 It previously printed New Recyle flag is: no. This fixes bug
1128 kes Correct seg fault when switching tape drives during restore.
1129 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
1130 be used until after 2.2.0 release.
1132 kes Remove fnmatch() in SD that permitted wild card specifications.
1133 This fixes bug #914.
1135 kes Fix %g in filename returned by SQL for browse tree reported by
1137 kes Fix configure so that it puts config.out in the cwd rather than
1139 kes Attempt to fix the locking problem reported by Eric in bug #906.
1140 kes Make berrno class to leave errno unchanged after constructor call.
1141 kes Make bnet_server use the heap rather than the stack to allocate
1142 its socket fd pointers to avoid a crash at termination. Problem
1143 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
1145 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
1146 and putting it in depkgs-qt along with Qt4.3.
1148 kes Rework code in acquire.c that switches drives for reading when
1149 the Media Type does not match. This should fix bug #906
1151 ebl Fix a director segfault during job setup #907
1152 kes Correct seg fault in postgresql when first operation returns no
1153 rows. Fixes Dirks File browser problem seg fault with bat.
1155 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
1156 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
1159 kes Implement PopUp YES/NO dialog for bat.
1161 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
1163 kes Correct RunScript to terminate job in FD on failure.
1164 kes Change abort_on_error and AbortJobOnError to fail_on_error
1165 and FailJobOnError in RunScripts.
1166 kes Minor tweaks of code formating in RunScripts, principally to
1167 avoid depassing 80 columns.
1169 kes Eliminate one #ifdef Win32 in bsmtp
1170 kes Implement grow tool to grow a file for testing very large databases.
1171 kes Add big-vol-test to test Bacula seeking with > 5GB.
1174 kes Modify find_next_volume() to return all values in Media record.
1175 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
1179 kes Update Release notes
1181 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
1182 Warning, in previous beta version, all media get from scratch keep their
1185 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
1186 This should fix bug #842. Made a note to look at removing the temp
1187 files at the end of the install.
1188 kes Add ability to mount and unmount a file device providing it is
1189 marked as being removable and has the appropriate mount and unmount
1190 commands defined in the Device resource. This fixes bug #830.
1191 kes When applying a storage override, release all previous storage
1192 definitions rather than just prepending the new storage.
1193 This should prevent a good deal of confusion.
1195 kes Implement ./configure search for qwt libraries.
1197 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
1198 Win32 FD. This should fix bug #893.
1199 kes Remove an unnecessary beep in Win32 init code.
1200 kes Update copyright dates in Win32 executable about boxes.
1201 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
1202 code with a BSD getopt.c and getopt.h.
1203 kes Remove sched.h from the Win32 compat directory -- not used.
1204 kes Remove the Exit menu item from the Win32 tray monitor. If you really
1205 need to shut it down, do it through the services panel or the command
1207 kes Remove some inappropriate Bacula FSFE copyrights.
1208 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
1209 kes Fix regress config non-portable test as pointed out by
1210 Florian Heigl <florian.heigl@gmail.com>
1211 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
1212 as pointed out by Florian Heigl <florian.heigl@gmail.com>
1214 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
1215 Reported by Frank Sweetser.
1219 kes Fix client-only build.
1220 kes Integrate client-only fixes for bsys (initgroups) and conio from
1221 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
1222 kes Make arguments to get_scratch_volume() in same order as other
1224 kes Rework the prune_volumes() subroutine so that after purging and
1225 no volume found in desired pool, it will check for a scratch
1226 volume. This prevents recycling the whole scratch pool.
1227 kes Add code to status storage to print boffset_t (largefile support).
1229 kes Move qwt (Graphics libarary for Qt4) to depkgs.
1230 kes You now need a --with-qwt=<dir> to be able to build bat.
1231 kes Update src/win32/cats/bacula_cats.def to include the new
1232 db_get_query_dbids() call on Win32.
1234 kes Correct a problem when selecting a scratch volume and moving
1235 it to another pool that lost some columns.
1236 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
1237 kes Enhance Autochanger error messages to include Volume and device name.
1238 kes Rework prune_volumes() code to take account of InChanger flag,
1239 and to handle recycling volumes going to the Scratch pool and
1240 current pool because the RecyclePool directive.
1241 kes Implement a better and more efficient db_get_query_dbids() to
1242 handle creating and passing back a list of DBIds.
1246 kes Start work on new more efficient DBId subroutine. First use
1247 will be for recycling volume to Scratch inchanger.
1248 kes Increase number of JobIds in pruning from 1000 to 10000.
1249 This to be replaced by above routine.
1250 kes Begin implementation of building Qt4 on Win32.
1251 kes Correct typo in fix I added for bad TLS shutdown.
1252 kes Pull 2.0.3 patches into patches directory.
1253 kes Update Release notes. Include qt-console in line count.
1254 kes Update Projects file.
1256 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
1257 bug in migration code where a job that spanned two volumes
1260 kes Implement new BST_DESPOOLING blocked state. Change from locking
1261 during despooling in SD to blocking. This means that other threads
1262 can work with the device structure, in particular the reservations
1263 system while despooling.
1265 kes Fix return in reservation message queue that missed clearing
1266 the jcr lock (implemented 26Jun07 below).
1267 kes Rename a number of dev methods to make locking function names
1269 kes Document locking in lock.c. Move lock structures to new file
1272 kes Move reservations message lock to lock jcr only this
1274 kes Move main SD locking code into lock.c (new file).
1275 kes Update Win32 build to include lock.c
1279 kes Dirk committed the qwt library code for drawing graphs in bat.
1280 kes Tweak install of qwt so that it is integrated with ./configure.
1282 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
1283 out by Eric (my typo).
1284 ebl Fix configure.in to get batch mode enable
1285 kes Return correct string from authenticate.cpp in bat when connecting
1287 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
1288 spurious line drops when using TLS.
1289 kes Do not file reparse points when restoring a file that already
1292 kes Implement Windows reparse points -- similar to directories, but
1293 we do not descend into it. This is a first cut. They seem to
1294 be backed up, but restore is not yet tested.
1295 kes Remove restore_blocking in tls code when shutting a socket to leave
1296 it in blocking mode. Hopefully this will fix the encryption bug
1297 reported by Frank Sweetser.
1298 kes When opening a file for backup, tell the OS that we are going to
1299 read it sequentially -- optimization.
1300 kes Change variable names in authenticate_director() to not conflict
1301 with member names in bat. Caused great confusion with compiler,
1304 kes Queue openssl error messages in case of comm problem.
1305 kes Do shutdown() call if socket terminated.
1306 kes Remove some duplicated code in tls.c
1307 kes Move more of the bsock member variables into private and access
1309 kes Add Frank Sweetser's tls-test to the regression suite.
1311 kes Add Swedish sv.po file
1313 kes Don't print clock skew message in FD if less than 3 seconds diff.
1314 kes Add a bit of VSS info to status client.
1315 kes Implement a first cut of Vista VSS, using Win2003 code.
1317 Release: 2.1.20 beta
1319 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
1320 loaded tape but uses first drive).
1321 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
1322 This was indeed a Win32 issue.
1324 kes Simplify search of autochanger for in-use Volume.
1325 kes Fix exit condition of check for in-use volume. kes Remove
1326 inappropriate my_postgresql_free_result() in db_close()
1328 kes Fix bad return in FD when encryption signature not found.
1329 Probably caused a crash.
1330 kes Inhibit missing encryption signature error messages for
1331 file types where no signature computed.
1332 kes Correct inverted check on autochanger in reservation system.
1333 kes Tweak debug code in autochanger reservation.
1335 kes Add some additional locking in the cats directory in subroutines
1336 that modify packet variables called from batch insert.
1337 kes Rework how dcrs are allocated. new_dcr() can now be called
1338 with an existing pointer, and it will simply clean it up.
1339 This allows the reservation system to test various different
1340 devices, and will permit easy device changes.
1341 kes A bunch of changes all over to handle new new_dcr() calling
1343 kes Work more on the Volume management in the SD. Remember Volumes
1344 for tape drives and for autochangers (even virtual disk changers).
1345 kes When looking at the Volume list to reserve a drive, handle
1346 autochanger names correctly by interating through the changer
1347 devices. Also call the Director to see if a Volume is suitable
1348 for the current job.
1349 kes Fix some bugs in bscan. Make sure all media records are written.
1350 Make sure that valid JobMedia records are written for disk files.
1351 Previously they were completely wrong.
1352 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
1353 that the URLs don't change and so that the developers will all
1354 work off the same copy. Rebuild from scrach.
1355 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
1357 Release: 2.1.18 beta
1359 kes Fix seg fault in FD from incorrect digest size.
1360 kes Fix argument to non-OpenSSL crypto.c subroutine.
1362 Release: 2.1.16 beta
1364 kes Remove a few malloc()s from the encryption code.
1365 kes Use the class calls to bsock in filed/backup.c and restore.c in
1366 place of the old bnet_xxx code.
1367 kes Implement code that does an on the fly calculation of the
1368 signing digest during restore of encrypted files. It makes
1369 a best guess at the algorithm, and if it is not correct, will
1370 then revert to the old code which reads the file after it is
1372 kes Implement at least one missing crypto stream in stream_to_ascii()
1373 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
1374 #877 where a reload with bad syntax causes Dir to exit.
1376 Cut: 2.1.14 beta (not released)
1378 kes Do not free a volume on a tape drive until another volume is
1379 mounted and read, or the autochanger unloads the volume.
1380 This should help the SD re-use volumes that are already mounted,
1381 and should fix bug #886.
1382 kes Apply patch from user brettedgar that allows gnome2-console include
1383 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
1384 kes Apply patch from Lucien Weller that fixes day of week calculation
1385 because of DST flag problem. Fixes bug #887.
1387 kes Move find_next_appendable_volume() to after acquiring a valid device
1388 in reserve.c. This fixes bug #864 -- confirmed by reporter.
1390 kes Unable to reproduce bug 872. However added additional testing for
1392 kes Bug #874 resolved by documenting SQLite limitations.
1393 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
1394 kes Bug #881 resolved by removing typo in mtx-changer script.
1395 kes Made Frank Sweetser's wiki the official Bacula wiki with his
1396 approval. Added a link to the wiki on the web page, and implemented
1397 a backup from http://paramount.ind.wpi.edu
1399 kes Fix update allfrompool to pass pool name.
1401 kes Convert to pure GPL v2 license.
1402 kes Fix sscanf problems reported by Peter Buschman that caused
1403 a bus error on Solaris.
1404 kes Rework (simplify) the select prompt in bat.
1405 kes Move get_jobid_from_tid() into lib and create a
1407 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
1408 should definitely fix the problem of lost error messages in the
1410 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
1411 kes Eliminate tcpd.h from the project. Enclose the #include from the
1412 library with extern C ...
1413 kes Add print of signal name when a signal is trapped.
1415 Release: 2.1.12 beta
1417 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
1419 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
1420 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
1421 makes SQLit3 run 30 times faster, though a bit less safe.
1422 kes Implement --with-batch-insert in configure and detection of thread
1423 safe libraries. It is on by default, but turned off if no thread
1424 safe library (e.g. SQLite 2) is available.
1426 kes Fix Bacula PostgreSQL buffer overruns.
1427 kes Do better checking for NULL results returned from PostgreSQL;
1428 implement retry for failed queries; clear results buffer after
1429 failed query. Hopefully this will correct the PostgreSQL failures.
1431 kes Implement algorithm to handle only one appendable volume with
1432 Prefer Mounted Volumes = no.
1433 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
1434 returned from a query.
1435 kes Make volume lock recursive.
1436 kes Implement an additional volume reservation algorithm that
1437 starts by considering all reserved volumes then uses the
1438 old brute force algorithm of searching the resources to
1439 find a suitable device.
1440 kes Add new reservations debug code and refine the old code.
1441 kes Update the win32/dll/bacula.defs file.
1443 kes Tweak reservations algorithm to permit a few more cases, i.e.
1444 volume reserved, but on different drive, ...
1445 kes Enhance SD status to include Pool and Media Type for drive in a
1446 more readable format (a bit longer).
1447 kes Fix PostgreSQL double free.
1449 kes Minor refactoring of restore decryption code.
1450 kes Add code to smartall.c to detect double free of a buffer.
1452 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
1453 so that bsmtp will create a correct email address (mailbox only).
1454 kes Modify 'memory' command so that the buffers are listed as 'In use'
1455 to avoid confusion with Orphaned buffers.
1456 kes I reworked the OpenSSL include/lib flags to be handled in
1457 the standard Bacula way, which should fix bug #863 concerning
1458 non-standard OpenSSL libraries.
1460 kes Implement Help Browser window for bat.
1461 kes Fix reload bug that reset StorageId to zero.
1463 kes Fix TLS #ifdefing when TLS turned off.
1464 kes Ensure that when labelling a tape with Slot=0 that InChanger
1466 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
1468 kes Add StartTime to final uar_sel_jobid_temp query so that we can
1469 add DISTINCT (required by PostgreSQL).
1470 kes Implement BSOCK authenticate_director() method. Eventually will
1471 authenicate all daemons.
1472 kes Move several more functions into the BSOCK class.
1474 kes Add code to tell the OS that we no longer need a cached
1475 file that we were reading. In findlib/bfile.c. Also,
1476 only cache files that we are reading. Thanks to
1477 Tobias Oetiker <tobi@oetiker.ch> for the idea.
1478 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
1479 kes Implement script to automatically generate cats and dll .def
1480 files for Win32 dll.
1481 kes Update README.mingw32 to include new .def file generation.
1482 kes Correct typo in UTF-8 error message as reported by:
1483 jhernandez <julianhernandez@gmail.com>
1484 kes Add additional sm_check() code on debug level 1.
1485 kes Set default debug level to 1.
1486 kes Trap SIGABRT in attempt to get traceback.
1488 kes Reduce bat connect timeout from 30 to 15 seconds.
1489 kes More restructuring and implementing BSOCK class in place of
1491 kes Remove a few unnecessary malloc() tests in crypto code.
1492 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
1493 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
1494 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
1496 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
1498 kes Fix Verify InitCatalog. The attributes were not pointing to the
1499 correct saved location.
1500 kes Implement message callback so that GUI is sure to get all
1501 daemon messages. Currently displayed in a dialog in bat.
1502 kes Ignore SIGUSR2 (Bacula timer) in bat.
1503 kes Apply regress patch from bug #859 to allow regress to work
1504 with Solaris compiler.
1506 kes Begin adding TLS support to bat.
1507 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
1508 clean up lex.c and make it more readable.
1510 kes Move more bnet functions into the BSOCK class.
1511 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
1512 kes Complete change of berrno strerror() method to bstrerror()
1514 Release: 2.1.10 beta
1516 kes Cleanup incorrect email addresses in bsmtp.
1517 kes Make bat display initial messages rather than discard them.
1519 kes First cut of adding .mod to the run command.
1520 kes Implement auto display of messages in bat.
1521 kes Enhanced preferences to allow all Bacula output to be
1524 kes Try to make bsmtp date routines more generic.
1525 kes Fixed bug #856 autochanger documentation.
1526 kes Rework bsmtp date editing for Win32. This fixes bug #854.
1527 kes Add new cats entry point so Win32 builds.
1529 kes Attempt to fix bsmtp date editing on OSes without %z editing.
1531 kes Do better checking for the MySQL 64 bit libraries looking for both
1532 .a and .so libraries.
1533 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
1534 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
1535 kes Require the thread safe version of MySQL during configure. Thanks
1536 to Andre Noll for pointing this out.
1537 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
1538 continuing in migration code.
1539 kes Apply implementation of tray-monitor font derived from gnome-console
1540 submitted by Andreas Piesk <a.piesk@gmx.net>
1542 kes Eliminate important memory loss in SQLite
1543 kes Fixed the batch insert MySQL thread specific data that was not
1544 being freed. See cats/mysql.c:db_thread_cleanup().
1545 kes Fix restore before command.
1546 kes Convert old hdr.name to name() in a few places.
1547 kes Implement update jobid command.
1548 kes Return all time_t dates in db_get_job_record()
1549 kes Stop watchdog in SD earlier.
1550 kes Put Pool just after Storage in please mount message.
1551 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
1554 kes Update the po files.
1555 kes Fix Verify InitCatalog by making it cache attributes.
1557 kes Change name bacula-bat to bat for man 1 page to correspond to
1559 kes Check for client and store NULL pointers in status command. This
1561 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
1562 kes Fix sign extended editing of %p.
1563 kes Clean out a little old #ifdefing in cats/mysql.c
1565 kes If time diff between DIR and FD is more than 600 seconds convert
1566 INFO message to WARNING.
1567 kes Implement heap size display in status for all daemons.
1568 kes Attempt to fix MySQL db open memory loss (not successfull).
1569 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
1570 kes Eliminate memory loss in MySQL (possibly other SQLs) during
1571 Query. This looks like a MySQL but but by doing extra releases,
1572 the memory goes away. This should fix bug #847.
1574 kes When backup fails, cancel SD before waiting for sd termination.
1575 kes If SD is waiting for FD to connect during cancel, wake up the
1577 kes Fix fsf code so that errno is correctly reported.
1578 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
1580 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
1581 so that Bacula doesn't later stumble into a seg fault.
1582 kes Use the term Restore Client in the restore Job report.
1583 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
1584 the original job's FileSetId.
1585 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
1586 spooling in migration jobs. Not yet tested.
1587 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
1588 reading conf file from a pipe. However, do it with open_bpipe()
1589 rather than popen. Not yet tested.
1591 kes Fix an ugly bug where the VolCatBytes were getting updated
1593 kes Implement bconsole memory command that prints current memory
1594 usage, plus smartalloc dump.
1595 kes Clarify some error messages in backup, admin, and migrate.
1596 kes Shrink label dialog to smaller size.
1597 kes Invert Cancel OK buttons on restore to be OK Cancel.
1598 kes More strerror() to bstrerror() conversions.
1600 kes Start implementing bstrerror() in place of strerror().
1601 kes Stripping path -- seems to work.
1603 kes Prevent door and port files from being restored (mostly
1605 kes Free an unreleased buffer in compat code.
1606 kes Change console Job name from *Console* to -Console- to eliminate
1607 Win32 filename problems. Put Win32 path separator when creating
1608 Console file. This fixes bug #846.
1609 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
1611 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
1613 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
1614 to force Win32 error message.
1616 kes First cut strip path. The data should be passed to the FD,
1617 but nothing is done with it yet.
1618 kes Enhance the digest and signature routines in the crypto
1619 library to accept a JCR and to use it to print error messages
1620 so that they will go in the Job report rather than the daemon's
1622 kes Simplify some of the verify signature code.
1623 kes Simplify a few of the alternative returns in the signature
1626 ebl Use only POSIX regex instead of GNU regex in breg.c for
1627 File relocation. It fix broken freebsd compilation.
1628 kes Convert all other Dir files to use new ua class message
1630 kes Tentative fix for missing digest signature in bug 807.
1631 kes Correct handle problem in new win32_ftruncate routine.
1632 kes Convert ua_purge.c and ua_update.c to use new ua class
1633 message routines for bat.
1635 kes Correct incorrect installation of LICENSE in Win32 installer.
1636 kes Display LICENSE at the beginning of the Win32 install.
1637 kes Attempt to correct the need for the png files to be installed
1639 kes Reapply my bat.conf install script in qt-console. I think I
1640 editted bat.pro instead of bat.pro.in and it was lost.
1641 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
1642 the /var/lock/subsys for subsysdir. Also corrects typos in the
1645 kes First cut update job.
1646 kes Correct configure to include qmake of src/qt-console directory.
1648 kes Make restore job yes/mod/no print in one command so GUI works.
1649 kes First cut implementing backup and restore client.
1650 kes Correct editing in Verify output that caused a seg fault.
1652 kes Insure that bat.conf is not overwritten during installation.
1653 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
1654 while I was implementing migration in March 2006 !
1656 ebl Cleanup file relocation, using char *RegexWhere instead of
1657 char *where + bool where_use_regexp
1658 kes Update some manpages and add bat manpage.
1659 kes Make a first cut at converting bacula.spec.in for bwx-console
1661 kes Apply patch from John Goerzen to add hostname as fourth argument
1662 to make_catalog_backup script.
1663 kes Fix typos I introduced into bsmtp.c
1664 kes Make pm_strxxx() routines handle input of NULL pointer. This
1665 is to protect from NULL pointers returned from SQL databases.
1666 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
1667 kes Add more debug to FIFO code -- fix fifo regression test.
1669 kes Implement posix_fadvise in FD, and for reading spool files in SD.
1670 kes Add thread timer to bnet_connect() to break from OS if wait time
1673 kes Update Win32 build to include new files, new symbols, and
1675 kes Implement socket level heartbeat (tcp_keepidle)
1676 ebl Commit File relocation patch
1677 kes Make bat have 'make install' target.
1678 kes Warn during install if old gnome-console binary found.
1679 kes Warn during install if old wx-console binary found.
1680 kes Add -8 option to bsmtp command line to add content type utf-8.
1681 Fixes bug #809. (Character coding problem in bsmtp).
1682 kes If < is found in target (from, to, cc) then do not enclose the
1683 target in < > in bsmtp. Fixes bug #772 (malformed address).
1684 kes When printing certain items in dbcheck, stop after 300000.
1685 Fixes bug #822. (dbcheck loops).
1686 kes Incorrect status in Dir after waiting for mount with poll set.
1689 kes Extend idea of Prefer Mounted Volumes to mean a volume about
1691 kes Print waiting to reserve a device every 5 mins.
1693 kes Don't call close_part in label.c if tape and relabel.
1694 kes Don't free volume if busy in close() -- should help with
1696 ebl Fix #824 RunScript bug (After script could be execute twice)
1697 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
1698 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
1699 Add a regression script to test RunScript
1701 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
1704 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
1705 deprecated. No additional bugs will be fixed, and they will be dropped
1706 in a future release (probably 2.4.0).
1707 kes Change name of wx-console to bwx-console to make it more Bacula
1709 kes Change the name of gnome-console to bgnome-console to make it
1712 kes Some time in March, a Feature Request with patch from Jorj Bauer
1713 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
1715 The ability for the director to validate a Client (FD) CN against
1716 an arbitrary set of patterns rather than the hostname, with
1717 A new 'TLS Allowed CN' set of directives which are implemented
1718 in the Client resource. Then pattern matching is used in place
1719 of hostname matching against the Certificate's CN. As an example, we
1720 have certificates which (a) use a local CA, and (b) have a CN of the
1722 kes Add new/changed entry points to Win32 build
1723 kes Create unaccepted-projects for projects that are not accepted.
1724 kes Simplify locking in the reservations system.
1725 kes Add more debug code in reservations.
1726 kes Make sure error condition on reserving a volume is handled correctly.
1727 kes Correct handling of volume_in_use.
1728 kes Correct handling of initializing a device.
1729 kes Move handling of broadcasting releasing a device into release_device().
1730 kes Correct attaching dcr to dev so that it is only done if device
1731 is properly initiated.
1733 kes Locking debug level tweaks in SD.
1734 kes Tweak new Volume code.
1736 kes Add exec external-command [wait-seconds] to bconsole. This
1737 executes the external-command. Note! normally external-command
1738 should be enclosed in double quotes.
1739 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
1740 it should normally be off in a production system.
1742 kes Implement die command for SD so that we can force it to dump.
1743 kes Implement SD lock debug code.
1744 kes Implement new algorithm for keeping Volume list in SD. It
1745 is now owned by the device.
1747 kes Implement new code for freeing in use volumes that should
1748 resolve if not all, some of the problems of multiple drive
1749 tape conflicts described in bug 801.
1751 kes Fix gui/bacula-web/images files in svn.
1752 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
1754 ebl Fix a bug in batch mode (in string escape)
1755 kes Correct migration prune SQL typo that crept in in a
1756 recent 2.1.x change.
1758 kes Move bnet_despool() into class in bsock.c
1759 kes Modify job report to include director name and Build OS.
1760 kes Move drop root privilege and check_catalog() before fork.
1761 kes Add update database scripts (version 9 to 10) to updatedb directory.
1763 ebl Check size and age of each file after its backup to see if
1764 it has changed during backup, if 'checkfilechanges' is set.
1765 The FD will do an extra check (stat(2)) after
1766 each file backup. mtime, ctime and size are compared with
1767 'before backup' information. If time or size mismatch, an
1768 error message will be generated. You must upgrade FD to use it.
1770 kes Make database name and user configurable
1771 --with-db-name=xxx --with-db-user=xxx
1772 kes Add back database type to message.c for debugging.
1774 kes Implement dir_sql() which issues an SQL query.
1775 kes Modify bat medialist to use dir_sql() and do some minor C++
1776 formatting as well as eliminating a number of pointers, simplifing
1779 kes Fix some of the mtx-changer grep commands for tape label readers.
1780 kes Convert a number of bsendmsg into the appropriate send/warning/error
1781 message class calls.
1782 kes Suppress the using database message in the .sql command.
1783 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
1785 kes Add context menu for floating a window.
1786 kes Some minor cleanup and name changes in qt-console
1787 kes Add doing mt setblk 0 in Win32 mtx-changer.
1788 kes Apply Martin's bug fix to move definition of ENODATA for
1790 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
1791 sqlite2 and sqlite3.
1793 kes More pruning cleanup.
1794 kes Turn on wait_for_drive by default in mtx-changer.
1795 kes Turn on Batch insert code by default as it now passes regression.
1796 kes Add ./configure --enable-bat to enable building of Bat.
1797 No install yet though.
1799 kes Implement a new .sql command for bat.
1800 kes Implement code to turn off pruning in obtaining the next volume.
1801 Pruning is turned off for the status dir command, but turned on
1802 for SD requests and for the list nextvolume command.
1804 kes Correct Qmsg() that was not updated correctly when committing a
1805 previous change (probably the recent TLS patch).
1807 kes Write new subroutine is_volume_purged() that explicitly checks
1808 if the Volume is purged, and if so marks it as such. This should
1809 resolve problems reported about needing to mount twice to recycle
1811 kes Rewrite pruning algorithm to do more work in the SQL engine, and
1812 to pass a list of JobIds to be deleted to SQL. Also, minimize the
1813 amount of duplicated code.
1814 kes Do volume pruning only for the Media Type desired (reduces pruning time
1815 if multiple Media Types are in the same pool).
1816 kes Implement more detailed info in the Job report for the Bacula version
1818 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
1820 ebl Add bbatch tool to bench database and insert mode.
1821 Fix sql quote stuff in batch mode
1822 Fix sql stuff for mysql
1824 kes Correct problems with am/pm scheduling. Fixes bug #808.
1825 kes Implement new prunning code that prunes up to 1000 jobs at
1826 the same time. The same technique can be applied to a number
1827 of other prune/purge subroutines.
1828 kes Add an insanity check when starting a new tape job to ensure
1829 that the tape position has not been changed. If so fail the
1831 kes Fix Win32 build for dlls to add the folllowing:
1832 src/lib/bsock.c -- new file with new entry points
1833 src/lib/dlist.c -- new entry points
1834 src/cats/sql_create.c -- new entry point
1835 src/cats/sql_cmds.c -- new DATA item exported
1837 ebl batch mode cleanup bscan-test is ok now.
1838 kes Implement SD code to check length of disk volume before appending.
1840 kes Correct return status on db_batch... routines.
1841 kes Add call to db_write_batch_file_records() to migration code.
1842 ebl Fix AfterJob timing
1843 kes Move the checking of the database in initializion of the Director
1844 to after we drop privileges. This avoids the need for both root
1845 and bacula access to the DB.
1846 kes Correct a misplaced variable definition in src/filed/backup.c
1847 kes Correct how the new batch insert db_create_attributes_record()
1848 uses the arguments. Caused a seg fault in bscan.
1849 kes Implement lock() and unlock() methods in DEVICE class.
1850 Implement block() and set_block(xx) methods in DEVICE class.
1851 kes Modify bnet_connect() so that it uses time() to check for the
1852 wait time expiring (on some OSes, some system calls may not
1853 return immediately).
1854 kes Modify Verify to obtain the previous JobId when it is actually
1855 running rather than at schedule time (as it was in 1.38.x).
1856 kes Fix src/job.c to handle MaxWaitTime correctly. This should
1858 kes When checking pid in pid file, continue running if the pid is
1859 the same as ours. This occurs on IRIX after a system crash.
1862 kes Extend new GUI API.
1863 kes Make the ua structure a class, and implement send_msg(),
1864 error_msg(), warning_msg(), and info_msg().
1866 kes Apply fix from for building wx-console on the Mac from
1868 kes Implement new select mechanism for GUI programs.
1869 kes Reorganize initialization of stackedWidgets in bat.
1871 kes Add updated nagios plugin supplied by Christian Masopust.
1873 kes More bat implementation.
1874 kes File migrate bug with Pool Occupancy using mediaid instead
1875 of jobids. Fixes bug #795.
1876 kes Fix orphaned buffers in filed backup and verify due to
1877 crypto buffers not freed during errors. Fixes bug #789.
1878 kes Extend new GUI api code to tree commands.
1879 kes Ensure that tree and dot commands check console ACLs.
1880 kes Permit marking directory with trailing slash.
1881 kes Allow 20 console connections (instead of only 10).
1883 kes Add smartctl call to bacula-sd.conf as an example of getting
1886 kes Modify jobq.c to let simultaneous restore jobs run. This may
1887 cause them to fail if they cannot get a drive.
1888 kes Add Client Connect Wait to Storage daemon to permit users to
1889 modify the time the SD waits for a FD connection.
1891 kes Correct virtual changer check which was backwards. This caused
1892 volumes to be unloaded into slots already occupied.
1894 kes Apply Command ACL filter to JobId list in restore command.
1895 kes Correct typeo in var.c patch.
1897 kes Don't let Bacula prune File or Job records for the current Job.
1898 kes Fix variable substitution pad + inc bug reported (with patch)
1901 kes Correct SQLite log table index as reported by Luca Berra.
1903 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
1905 kes Begin implementing new comm signals for API.
1906 kes Fix a few places in lib/message.c where the open fd may
1908 kes Continue implementing lib/bsock.c (real class). Make jcr,
1909 who, host, and port private. There are new methods to access
1910 them for non-class use. This required touching a number of files.
1912 kes Add LANG=C to autoconf/randpass so it works with languages other
1913 than English. Fixes bug #788.
1915 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
1917 You will not be able to generate Include/Exclude list any more.
1918 It will be fixed soon.
1919 If you want to use this, you can apply
1920 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
1922 kes Restore of sockets created false error messages because Bacula
1923 no longer restores sockets, but the code was still trying to
1924 set the attributes on a non-existent file. Reported by a user.
1925 ebl finish RecyclePool feature
1926 Media will takes Pool.RecyclePool
1927 when moving from Scratch to a Pool or when user will do
1928 update volume=xxx frompool
1929 To use it, add RecyclePool = aPool to your Pool resource
1932 RecyclePool = Scratch
1936 kes Expand new BSOCK class adding signal() and new BNET signals.
1937 kes Begin enhancing the dot commands adding a new API function
1938 that returns more information and will make it easier
1939 to interface to the Director from a program.
1941 kes Make DEVICE fd private. Its new name is m_fd, and can be
1942 obtained with dev->fd() outside the class. This is the
1943 first of many DEVICE members to be made private.
1944 kes Implement Michael Renner's idea on having a virtual disk
1945 changer. I made some minor modifications (e.g. I did not
1946 implement the Virtual Changer directive, but simply set
1947 the Changer Command to an empty string.
1949 kes Implement a BSOCK send() method that writes the whole record
1950 in a single write() request rather than in two.
1951 ebl add update volume=xxx recyclepool=yyyy
1952 volume takes recyclepool from pool when using update volume=xxx from pool
1954 kes Fix encryption deblocking bug, which caused some restored files
1955 to be truncated. This fixes bug #763.
1956 kes Add FD event sequence order prepared by Eric -- for RunScripts.
1957 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
1959 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
1960 ebl Use btime_t instead of uint64_t in media patch.
1962 kes Optimize the use of the database a bit in the Status dir command.
1963 Only open it when needed, ensure that if any previous database
1964 was opened, it is closed.
1966 kes Correct VolCatBytes bug from media patch.
1967 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
1968 in the case of orphaned records.
1969 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
1970 and File records in 300K chunks to be more efficient. This
1971 idea came from Juan Luis Frances (if I remember right).
1972 kes Apply Eric's scratch patch that moves a purged Volume to
1973 the RecyclePool. Question: how is RecyclePool set? what
1974 happens to the ScratchPool?
1975 kes Apply Eric's media patch that collects read/write media
1976 times as well as byte counts. This patch requires a
1977 simultaneous upgrade of the DIR and SD. Note, there
1978 should be some way to turn off timing. I'm not sure
1979 times are in Bacula units.
1980 kes Apply Eric's batch-insert patch.
1982 kes Update projects list.
1984 kes Implement Include/Exclude file lists in FD as dlists using
1985 the new dlistString class. This permits efficiently having
1986 large include/exclude lists and completes project Item 25.
1987 kes Fix dird/ua_cmds.c so that a cancel command checks if the
1988 console is authorized to cancel the job. This fixes bug
1990 kes Modify SD so that the VolCatJobs medium record is updated
1991 at the beginning of a Job rather than the end. This
1992 fixes bug #775 where exceeding MaxVolJobs caused jobs
1994 kes Added a mutex around getting and setting Volume information
1995 so that multiple simultaneous jobs will single thread.
1997 Switch to using Subversion
1998 kes Remove src/pygtk-console/ from configure
2000 kes Delete src/lib/btree.c from win32 build, then add rblist.c
2001 plus the entrypoints.
2002 kes Apply patch supplied that corrects debug print
2003 in canceling jobs for max run time. Supplied as
2004 part of bug #621, which was previously fixed.
2006 kes Test on job_canceled() and sd_msg_thread_done inside
2007 loop starting the message thread to avoid a race condition.
2009 kes Remove rl_catch_signal from console.c as it conflicted
2010 with the header definition. Fixes bug #765.
2011 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
2013 kes Clarify some stored/acquire messages to indicate if the
2014 problem is with read or append.
2016 kes Fix memory leak with storage ids in cats/sql_get.c
2017 kes Terminate watchdog earlier to avoid reference to released
2018 memory -- reported by Jason Austin.
2019 kes Move closing the database from jobq.c to the director daemon
2020 termination routine. This fixes memory leaks for shadow jobs
2021 (i.e. migration jobs).
2022 kes Free up the unique jobid chain items in migrate.c. This fixes
2023 a memory leak problem.
2024 kes Convert some ugly looking for statements to use foreach_alist
2025 in findlib/find.c. This will facilitate converting the structures
2026 to use dlist (for large include/exclude lists).
2027 kes Fix a bug in the btree.c and btree.h routines, then rename them
2028 rblist and add them to be built in src/lib. Include some new
2029 methods written by Rudolf Cejka that make the code more readable
2030 (hides some of the ugly casting).
2031 kes Add set_next() and set_prev() methods which make the code much more
2032 readable. Also add a new dlistString class that facilitates storing
2033 strings in dlists. To be used in the large include/exclude lists.
2034 kes Make some trivial modifications to lib/tree.h that use rblist
2035 rather than dlist for storing the tree links. This was suggested
2036 by Rudolf Cejka. The result of this is that the restore tree now
2037 uses red-black binary trees rather than simple linked lists. This
2038 should give rather dramatic speed improvements for directories
2039 contining large numbers of directories/files (more than 10000).
2041 kes Fix maxruntime bug #621.
2043 ebl Implement the include JobID in spool file name project.
2044 kes Reorder projects file in order determined by Jan 2007 vote.
2045 kes Implement item #12 on project list -- quick release of FD by
2047 kes Fix open of SQLite3 db where user does not have write permission
2048 so that DIR does not crash. Fixes bug #761.
2050 kes Add back missing @ in Win32 Makefile.
2051 kes Change 'Device not configured to autolabel' from INFO
2053 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
2054 which should restart an indefinite # of times.
2055 kes Fix configure --help to print --with-mysql[=DIR]. Same for
2056 other DIR specifications.
2058 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
2059 Fix path quoting in SQLite scripts.
2060 Fix problems with SHGetFolderPath.
2062 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
2064 kes Fix Job restart on error bug that promotes an Inc to a Full
2065 backup. This should fix bug #755.
2066 kes Add qt-console and first cut of code.
2070 kes Fix Bacula->Documentation link on Win32 to point to index.html
2071 instead of bacula.html. Fixed bug #750.
2072 kes Return JobId in db_get_job_record() when JobId==0. This should
2074 kes Do not release source pointers when restarting a failed job.
2076 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
2077 This *should* fix bug #747.
2078 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
2081 kes Modify USTORE constructor to set an empty store_source string,
2082 and don't copy the store_source string in a cancel. Hopefully
2083 this will fix Arno's seg fault, bug #744.
2084 kes Add back code to disable conio in configure. Fixes bug #743.
2085 kes Correct the Options scanner in the FD to correctly handle
2086 SHA1 option, which was eating the next option. Reported by
2088 kes Add code to indicate when the SD is spooling, spool wait, and
2089 despooling as requested by Alan Brown.
2091 Version 2.0.0 released: 4 January 2007
projects / bacula / bacula / blob