1 Technical notes on version 2.5
9 Multiple command/console per runscript
10 console command in runscript
13 State file updated on job term
16 Duplicate Job directives
17 - Allow Duplicate Jobs
18 - Allow Higher Duplicates
19 - Cancel Queued Duplicates
20 - Cancel Running Duplicates
21 Ensure they work with RerunFailedLevels
25 Improved status commands for Bat
26 Spooling/despooling status
27 Implement ftruncate for NFS devices
28 Add long term statistics job table
31 separator in console (!$%&'()*+,-/:;<>?[]^`{|}~)
36 kes Add additional info to some SD messages.
37 kes Add fix supplied by Martin Simmons for turning off EOL character
38 in new console multi-command code.
40 kes Fix a Verify InitCatalog problem where in certain cases
41 a garbage filename may be entered in the verification database. This
44 kes Add VSS 64 bit dll entry point in src/win32/filed/vss_generic.cpp
45 sent in by Riyas Yoosuf.
47 kes Fix seg fault in Dir during estimate command with no level value
48 given. This fixes bug #1140.
50 kes Add message to migration job when the target job is already migrated.
51 This closes bug #1129.
54 kes Raise some restore debug levels.
55 kes Replace off_t by boffset_t where ever I found it.
57 kes Define a machine dependent ioctl request type for use with
60 kes When a migration job actually runs, re-check the Job record
61 and skip if the job is already migrated. This should
62 significantly reduce the problems with bug #1129.
64 kes Set MALLOC_CHECK_=0 in environment before starting Bacula to
65 turn off glibc checks that prevent getting good dumps.
66 kes Implement console 'wait mount' command. Doesn't yet work.
67 kes Implement timeout=nn on console 'wait mount timeout=nn' command.
68 kes Break the do_swapping into do_unload, do_swapping, and
69 do_load. It is much more logical that way.
70 kes Implement a set_dcr_from_vol subroutine in acquire.c for
71 reading volumes. This allows the dcr to be refreshed after being
72 zapped when the wrong volume is mounted.
73 This should fix bug #1126 -- During multiple tape restore, bacula
74 does not ask for physical tape change, but rereads same tape
76 kes Apply patch submitted for bug #1107 with a small modification.
77 This fixes a bug where bcopy copied too many records.
78 kes Make some tweaks to bsmtp based on patch submitted in bug #1124.
80 kes Make the default bat restore Pool be Any. This fixes bug #1118.
82 kes Remove debug statement that crashes the SD at the end of
83 a tape during restore. Fixes bug #1125.
85 kes Implement Win32 bat changes made to Branch-2.4
87 kes Tweak separator command in console to start disabled and
88 allow defining no separator character. Also make code a
89 bit more fault tolerant.
90 kes Make btraceback write the traceback to the working directory
91 before attempting to mail it.
92 kes Add a RFC to Projects.
94 kes Attempt to implement a kludge to make Qt work with bat
96 kes Setup rstorage correctly. Virtual backups are working.
98 kes Move setting JobLevel and JobType into a method, which should
99 allow completing Virtual Backups.
100 kes Fix verify jobs to work again.
102 kes Virtual Backup tweaks -- it is close to working.
104 kes Ensure that SD tried to mount a volume not in an autochanger
105 at least once before asking for operator intervention.
106 kes Make SD aware of Virtual Backup jobs.
107 kes Add VirtualFull for bat.
108 kes Changes to get read storage correct for Virtual Backup.
110 kes Remove old code from label.c
111 kes Split display_display_info() out of write_bsr_file()
112 kes do_vbackup_init() working -- i.e. bootstrap file built.
113 kes Change Bacula trademark owner from John Walker to Kern Sibbald
114 kes First non-working cut of vbackup
115 kes Correct FD heartbeat code to use volatile variable accessed by
117 kes Zero thread id with memset if on Win32 in case it is a struct.
118 kes If cannot create JobMedia record, continue to try to write eof
119 and clean up in block.c
121 kes Add code to interface OpenSSL to new Win32 pthreads code which
122 used a structure for thread_t.
124 ebl tweak bat for win32 compilation
126 ebl Remove tokyo cabinet from the source
127 ebl Update configure/autoconf to support berkeley DB
128 ebl Add a sort to db_get_file_list() to improve bsr construction time.
130 kes Add a mtx-changer.conf file that is not overwritten during
131 an upgrade. It fully configures the mtx-changer script.
132 kes Clear in-use bit on vol when unused while swapping.
134 kes Remove sleep at end of ./bacula
135 kes Clear hash packet for hardlinked files correctly. This corrects
136 a long standing bug where hardlinked files selected individually
137 would occasionally not be restored.
139 kes Apply Eric's patch to ensure that autoprune does not return
140 a Volume not in the autochanger unless requested to do so.
141 kes Correct bat restore display of multiple drives. This fixes
143 kes Do find_a_volume() each time an unload is done. This
144 fixes the failure of maxvol2-test.
146 kes Add some SD debug code.
147 kes Do find_a_volume() each time an unload is done.
148 kes Apply Joao's DBI patch that adds easier configuration of DBI drivers,
149 and adds --with-db-port to ./configure.
150 kes Use Qmsg() in job.c watchdog callback.
152 kes Release main control rwlock if ABORTing.
153 kes Make watchdog connect timeout queue messages rather than sending
154 directly to avoid lock conflicts with the real thread.
155 kes Add const char in dbd.c to avoid compiler warnings.
156 kes Fix python compiler string warning. Note, IMO the GNU C++
157 compiler guys have made a *very* bad change to their compiler.
158 They now force all strings to be 'const' unless you explicitly
159 cast them, which is extremely ugly and ruins nice code as well
160 as creates a lot of useless work.
162 kes Fix mtx-changer to detect both versions of Ubuntu (Debian)
163 mt. This fixes bug #1116.
164 kes Add const in python files to reduce compiler warnings.
165 This may have to be backed out because of later compiler
167 kes Fix failure of 2drive-concurrent-test. Always read label;
168 clear_unload() only after drive is defined in acquire_for_read().
170 kes Generally clean up the manual tape loading code. The main
171 conceptual change is that when a volume is marked to be unloaded,
172 its volume name is retained, and it is only marked as unloaded
173 when either the autoloader says it is unloaded or another tape
174 is read on that drive.
176 kes Add debug code and refactor subroutine in stored/mount.c
177 kes Fix format problem in bscan output reported in bug #1105.
178 ebl Fix get_next_volume_for_append logic with autochanger
179 - use pruned volumes if found
180 - don't reset the inchanger flag after getting a recycled volume
182 Fix recycle_oldest_purged_volume to take InChanger flag in account
184 ebl Add mmap/unmmap implementation for tokyodbm under win32
186 kes Make first step toward eliminating globals from config
187 scanning. Also should be a workaround for FORTIFY_SOURCE
188 GNU C bug -- fixes bug #1042.
190 kes Apply duplicate job tests to restarted jobs.
191 kes Copy more data when restarting a job so that run
192 overrides are kept. This should fix bug #1094.
194 kes More word alignment cleanup.
195 kes Fix bug where SD did not ask operator if the device could not
196 be opened. Reported by Eric.
198 kes Add dbuser to DIR conf file (replaces user).
199 kes Add --with-db-password to ./configure
200 kes Fix regress to handle db_password.
201 ebl Add new "status storage slots" that list autochanger
203 ebl Update vtape driver to compile only under Linux.
204 ebl Fix a bug when restoring with a wrong mediatype.
206 kes Eliminate ints from conf files and structures to avoid
207 word alignment problems
209 kes Fix bug reported by Scott Barninger where the bacula script
210 refers to scripts in the wrong directory. Needed to meet the
211 requirements of recent FHS location changes.
212 ebl Disable vtape for FreeBSD.
214 ebl Modify disk-changer to check if slot contains something before
217 ebl Fix vtape on win32 and debian.
218 ebl Fix autoselect patch (cause segfault).
220 ebl Fix autoselect option broken for a while. Fix #1089. Need some
221 work with StorageId to be able to use a particular drive in a
224 ebl Rename vtape to vtape.
225 ebl Update vtape driver.
227 ebl Modify vtape driver to avoid sparse file.
228 kes Add make clean of qt-source directory during ./configure
229 kes Store last block number written to tape in DEVICE and
230 use it for testing for correct last block on EOT.
232 Release Version 2.4.0:
236 kes Make sure to clear JS_WaitMedia when operator mounts a Volume.
237 This fixes bug #1095.
239 kes Add create_postgresql_database.sql to Win32 installer. Should
240 fix problem reported by Juilio Monteiro.
241 kes Get correct slot when auto unloading a device. This fixes bug
244 kes Fix multiple media restore.
245 kes Make DEVICE Slot private and access it via a method.
246 Allows better control over when it is set and cleared.
247 kes Fix possible seg fault if SQL error.
249 kes Add Martin's fixes to argument scanning for the estimate
250 command. This fixes bug #1093.
251 kes Add debug code to SD.
252 kes Fix renaming a Volume, which used the wrong Volume name.
254 kes If operator has rewind tape, print warning, release tape and
255 try once more. If tape is positioned somewhere, something went
256 wrong, so mark the tape in error and try once more. Previously
257 this error was fatal, now it produces an error message.
258 kes Ensure correct volume name displayed during restore
259 kes Ensure that Volume is mounted for restore.
261 kes Fix a few more Coverity reported problems.
263 kes Apply Allan Black's status dir job count patch.
264 ebl Add information about IMPORT/EXPORT slots in mtx-script.
265 kes Enhance a couple of SD debug messages.
266 kes Tweak unload flag setting and ensure it is set during swap.
268 ebl Fix #1091 about bad output in estimate command.
270 kes Modify autochanger locking to attempt to avoid race
272 kes Make sure device not busy before doing label command.
273 kes Display open() errors except when polling. Previously too
274 many were suppressed. This should fix bug #1070.
275 kes Fix Win32 reparse points. Bacula will not recurse into any
276 reparse point directory, including mount points, unless the
277 directory is explicitly mentioned at the top level (same as
278 with Unix). A file that is linked to another file will be
279 backed up -- much as Unix does for hardlinked files.
280 This fixes bug #1041.
282 kes Remove double quotes from ChangeLog and ReleaseNotes
283 kes Remove StorageId test when pruning and recycling (Eric's changes).
284 kes Remove old form of locking when getting volumes -- causes deadlock.
285 kes Change bat dirstat layoutWidget to dirstatlayoutWidget to make
286 the name unique and to eliminate compile time error.
287 kes Add accurate.o to Win32 FD Makefile
289 kes Fix cats dll build on Win32 after db_update_job_end_record
290 calling sequence change.
291 ebl Switch to tokyo dbm instead of htable in accurate code
292 ebl Include tokyo dbm to bacula source tree
294 kes Fix buffer overruns detected by Coverity.
296 kes Tweak joblog display.
298 kes Implement --without-qwt
299 kes Fix layout of restore tree dialog
300 kes Add configure bat QWT libraries, so that bat can be built
301 with or without the QWT libaries.
303 ebl Add dummy tape driver for regression tests.
304 kes Make sure we unload the right slot when swapping.
306 kes Add debug times, reduce size of two-pool-changer test
308 ebl Tweak autoconf scripts for vtape
310 kes Improve SD reserve debug code.
311 kes Testing an improvement to free up volumes no longer in use.
313 kes Rework SD acquire for read to handle autochanger Volume
315 kes Implement regression that explicitly tests swapping a Volume
316 from one drive to another.
317 kes Enhance disk-changer to detect most error conditions.
318 kes Fix SD code so that it properly swaps a Volume between drives.
319 This fixes bug #1083.
321 kes Apply libdbi patch from Joao Freitas for regress and for
322 Bacula trunk. Regress now works with libdbi. Nice.
323 kes Apply .nobackup patch from bug #1077 submitted by
325 kes Apply Bastian Friedrich's patch that adds %p to edit the pool
326 name into jobs cloned via the run directive.
328 kes Prevent a Volume that is being swapped from being freed from
329 the volume list. This will most likely fix, at least partially,
331 kes Fix strippath so that it does not get a buffer overrun and crash FD.
332 This fixes bug #1078.
333 kes Remove 50 millisec wait in SD that broke debugger.
334 ebl Add MaxRunSchedTime option that specifies the maximum allowed time
335 that a job may run, counted from when the job was scheduled.
336 ebl Fix MaxWaitTime option that specifies the maximum allowed time that
337 a job may block waiting for a resource, counted from when the job starts
338 ebl Rename (add) Max(Incr|Diff|Full)WaitTime to Max(Incr|Diff|Full)RunTime
339 kes Apply patch from bug #1076 by Tullio Andreatta <t.andreatta@troppoavanti.it>
340 that implements multiple commands per line in the console when using
341 readline. Modify the default to use a semicolon as the command separator.
343 ebl Fix SQL query in migration code.
344 ebl Make accurate mode with hash disk pass regression tests
346 ebl Implement first cut of accurate backup with hash disk.
348 kes Force unload of volume when wrong volume mounted in SD.
350 kes Fix bat seg fault at termination.
351 kes Add Bacula generated version to bat about box.
354 kes Experiment with allowing multiple read jobs.
355 kes Move final volume swapping code to DCR method and
356 call it from acquire_for_read().
357 kes When wrong volume is mounted during read, unload_autochanger.
359 kes Integrate the libdbi changes from Joao Henrique Freitas
361 kes Stop searching for Volumes in SD askdir if DIR returns the
362 same volume name twice in a row.
363 kes Close bat console windows first to eliminate error message
366 kes Tweak the swap Volume from one drive to another code so that
367 it now seems to work.
368 kes Resolve several problems with recycling that broke the new
369 code (these problems are in 2.2.9 as well).
370 kes Remove the volume lock when calling the sysop code.
371 kes Don't mark a reserved volume with no writers as unused otherwise
374 kes Rework class structures for VOLRES, DCR, and DEVICE to make
375 the method names a bit more logical, and for more logically
376 handling the responsibilities.
378 kes Remove redundant code in terminating the scheduler that just
379 causes a seg fault in many cases.
380 kes Cleanup releasing a volume and make it a DCR method.
381 kes Improve algorithm for detecting pre-reserved volume and
384 kes Tweak volume swapping code so it works.
385 kes Correct name overloading in mount.c
386 kes Replace released flag in VOLRES with reserved and add access
387 methods for the VOLRES class.
388 kes Prevent volume from being released while being swapped.
389 kes Apply Bastian Friedrich's edit codes patch for the bpipe-fd
391 kes Apply Bastial Friedrich's edit pool=%p patch for run clone
393 kes Refactor parts of stored/mount.c
395 ebl Add sanity checks for VolWriteTime and VolReadTime
396 ebl Take care of bad clock changes while computing VolWriteTime
397 and VolReadTime. This should fix or limit #1066
398 kes Correct error string numbers in dird/catreq.c
399 kes Restructure reserving, acquiring, and mounting volumes. Calls to
400 autochanger are deferred for mount.c -- simplifes the code.
402 kes Do not prune any running job. It just fails the job.
403 kes Lock the volumes when changing dev->reserved_device and marking
404 the volume unused otherwise the device can get reserved by
405 another job before the volume is released, thus blocking it.
407 kes Correctly detect Ubuntu systems, and add ubuntu platform directory.
408 kes Fix bug #1063, reuse of freed ptr in list nextvol.
409 kes Release regex compile buffer in filed/job.c
410 kes Add proper type of const char in sql_create.c
411 kes Turn off debug in daemon termination routines
412 kes Move free_volume_list() before devices are freed in stored.c
413 kes Fix reference to uninitalized stack variables in bregex.c.
414 This should correct bug #1067.
416 kes Fix possible seg fault in SD when freeing a volume entry.
418 kes Implement unload_dev() before swap device.
419 ebl Add statistics prunning with option and menu
420 kes Separate unload_dev() from unload_other_device() in autochanger.c
422 kes Apply patch from bug #1069 that corrects spurious error messages
423 when ACLs enabled on SGI but no ACL exists.
424 ebl Fix small segfault in bacula-sd when debug level is 500
425 kes Modify run_program() and run_program_full_output() to use
426 call by reference for the results string. This corrects a long
427 standing problem where the address of the string may be changed
428 in the subroutine but not in the calling program.
430 kes Re-enable code to remember last volume mounted on a non-tape
432 kes Add patch supplied in bug #1068 that fixes a SD crash when using
433 a Virtual autochanger.
434 kes Generate correct JobMedia records during spooling/despooling when
435 running concurrent jobs. Thanks to Tom Ivar Helbekkmo
436 <tih@hamartun.priv.no> for excellent analysis and testing.
438 kes Tweak hash algorithm for htable using Martin Simmons idea
439 for doing a circular shift.
440 kes Remember what volume is in VTLs (previously turned off for
442 kes Analysis of JobMedia records by Tom Ivar Helbekkmo <tih@hamartun.priv.no>
443 pointed out some problems in creating JobMedia records during
444 spooling with concurrent jobs. Fix the problem by updating the
445 start file position before despooling and generate a jobmedia
446 record at the end of despooling.
448 kes Fix handling of JobMedia records during spooling and when a
449 Volume is changed without actually writing data to the Volume.
451 kes Rework certain SD locking based on gdb tracebacks of deadlocks
452 sent by Eric. This code now uses only the volume_lock() rather
453 than the reservations lock when at EOM and acquiring a new
455 kes Ensure only one exit point in several subroutines.
457 kes Implement bsock code to permit locking. Use the new code in Verify
458 in the FD to prevent the heartbeat thread from disrupting the Verify
459 data sent to the Dir.
460 kes Modify SD locking to eliminate locking the reservations system from
461 outside the system. Use the volume lock when getting media data
462 and reserving a new volume at end of media.
463 kes Add Eric's volume_unused() fix to stored.c so that Volumes found
464 when SD starts are not locked into place.
466 kes Fix error compiling runscript code on 64 bit machines.
467 kes Tweak Win32 mount point code.
468 kes Fix a couple of bugs in the accurate code (bad sscanf, buffer not
469 cleared giving bad file estimate).
470 kes Implement BIG_MALLOC in htable code. Runs 2.5 times faster for
473 kes Keep Schedule run lists in order as suggested by
476 kes Implement autostart scripts for Debian.
477 ebl Implement upgrade catalog scripts.
479 ebl Apply jobstat patch for long term statistics. Have to implement
480 purge stats command and upgrade scripts.
481 kes Fix mtx-changer.in for broken Debian mt program.
483 kes Fix large number of JobMedia records reported by Eric Bollengier.
485 kes Apply doc fix from bug #1062.
486 kes Resolve crash and improper restore wx-console Win32 restore
487 GUI. Fixes bug #1065.
488 kes Update Win32 wxWidgets to latest version.
489 kes Attempt to do correct handling of Win32 mount points. Should
491 kes Fix Win32 FD backup/restore memory leak due to improper termination
492 of BackupRead/Write. This fixes bug# 1038.
494 ebl Reduce memory usage for accurate backup, working only with ctime
495 and mtime. (not all Lstat field)
496 About 40MB for my Linux system (400.000 files)
498 kes Add dcr->reserved_volume flag that allows us to release a volume
499 even if it is not vol->released. This allows maxvol2 to work when
500 Volumes expire and we are already writing to the device (i.e. a
501 volume is pulled out from under us by another job terminating after
502 we reserve the drive).
504 ebl Permit multiple command/console per runscript definition.
505 RunScript { command = /bin/true ; command = /bin/false ... }
506 ebl Add RunsWhen = AfterVSS to runscript. You can execute a command
507 (restart an application) just after the VSS snapshot on windows.
508 kes Don't zap dcr values during release_volume() as they might
509 have the next Volume to be mounted.
510 kes Fix AIX prototype.
512 kes Second cut of drive switching during backup.
515 kes Update Win32 version of wxWidgets to most recent version.
516 kes Tweak Copy job details.
517 kes Rework dir_find_next_appendable_volume to make a bit more effort
518 to find a suitable volume before giving up.
520 kes Make ask_sysop_to_create... to return if waken from wait.
521 This helps get out of blocked conditions.
522 kes Experimental implementation of switch_device in reservations.
523 kes Implement FD version to allow easier protocol changes.
524 kes Add Plugin Options string -- not yet passed to FD.
525 kes Implement PluginOptions ACL.
527 kes Attempt to correct problems with restores with autochangers and
528 use counts going negative
529 kes Rework SD status command and implement API for bat. Implements
530 header, runing waitreservation, devices, volumes, spooling,
531 and terminated status keywords.
532 .status storage=xxx <keyword>
533 kes Clarify TLS error message by adding double quotes around name.
534 kes Simplify SD/FD status code by putting api flag in STATUS_PKT
535 kes Pass jcr to tls routines so debug messages can be handled better.
536 kes Rework jobq resource allocation code, and possibly fix a bug
537 that caused reference counts to get out of sync.
539 kes Rename fd/dir plugin to use Bacula standard underscore.
540 kes Plugin work -- bring dir up to fd level.
541 kes Start implementation of VTL code
542 kes Fix Win32 build after adding new cats subroutine.
544 kes First cut at Duplicate Job implementation.
546 kes Fix bugs in MaxFullInterval and Implement MaxDiffInterval.
547 kes Start PluginOptions string, and refactor a bit of ua_run.c
548 ebl Apply Allan patch that permit to reset recyclepool.
550 kes Test patch -- possible fix or improvement for bug #1053
551 kes Refactor FD and SD status commands to permit new API code in
552 SD, and to fix Win32 build.
553 kes Win32 build is now working.
555 kes Implement 'MaxFullInterval' and start 'MaxDiffInterval' based on
556 some ideas in patch from Scott Bailey.
557 kes Begin implementation of duplicate Job control.
558 kes Fix some of Win32 build after recent additions.
559 kes Apply patch from Frank Kardel that implements 'honor no dump flag',
560 which causes the FD to detect whether or not the OS has the
561 honor no dump bit (*BSD systems), and if so, to skip backing up
562 any file with this bit set. The feature is enabled by setting
563 'honor no dump flag = yes' in the Options section of a FileSet.
565 kes Correct po warning message with datarootdir
566 kes Implement more code in dird.c to put configuration parsing in
567 a class rather than use globals.
568 kes Restructure SD status command for implementation of bat API
571 kes Suppress incorrect 'Will not descend from x into y' messages.
572 kes Eliminate FORTIFY_CODE=2 bug, and make first cut at removing
573 daemon globals used by parser.
574 kes Apply Joao's patch to separate DB_TYPE and DB_PROG in configure.
576 kes Fix free of plugin_list when none exists.
578 ebl Apply accurate project patch.
580 ebl Fix a segfault when using strip_path option. (Use of pm_strcpy
581 on non-mempool object)
582 kes First cut of converting FD .status to work with bat API.
584 .status client=XXX header
585 .status client=XXX running
586 .status client=XXX terminated
587 kes Implement first cut of Copy Job.
588 kes Implement Catalog in Pool resource. It overrides catalog specified
589 in the Client resource.
591 kes Apply patch (with some difficulties) from Joao Henrique Freitas
592 <joaohf@gmail.com>, which adds support for libdbi as a Bacula
594 kes Add patch from Martin Schmid scm@apsag.com that checks to see if
595 ftruncate() actually works. In the case of some (cheap) NAS devices,
596 it does not, and so recycling NAS Volumes does not work. The code
597 simply unlink()s the file, then recreates it. This fixes bug #1011.
599 kes First incomplete cut of big malloc blocks for htable.
600 kes Tweak plugin code.
602 kes Plugin debug code + tweak a couple bat dialog layouts
604 kes Fix creating first JobMedia record during Migration to include
605 proper index. This caused slow restores of migrated jobs.
606 kes Temp fix to plugin name file_index.
607 kes Bacula backed up and restored a MySQL database.
609 kes Implement plugin restore.
610 kes Implement parsing of db_driver to give db_type index.
612 kes First cut of plugin restore code.
613 kes Fix bug #1047, which had a heap overrun when stripping certain paths,
614 and do not strip paths on symbolic links.
615 kes Set catalog backup database and user name from values specified on
616 the ./configure line.
617 ebl Fix #1031 about wrong pool source information in job report.
620 kes Remove a redundant jcr argument to find_files, match_files, and
622 kes Implement '.status dir header|scheduled|running|terminated' that
623 prints the requested status section. With the exception of the
624 header, the other reports have fields separated by tabs (\t).
626 kes Apply patch from Peter Much <pmc@citylink.dinoex.sub.org> that fixes
627 a resource embedded run command to find a since time if no explicit
628 since time was supplied on the command line.
629 kes Apply state-file.patch sent by Allan Black <Allan.Black@btconnect.com>
630 that updates the state file at job termination time in addition to
631 when the daemon terminates.
633 kes First version where a plugin did a backup.
634 bpipe-fd.so created a backup file, wrote a test
635 string to it, and Bacua could restore this fabricated file.
637 kes Implement DB Driver = string for the DBI driver.
638 kes Remove all old bdb_xxx.c code. Add dummy routines to bdb.c
639 kes First cut of code for loading Win32 plugin dlls. Implement
640 dlopen, dlsym, dlclose, and dlerror in src/win32/compat/compat.cpp
641 and implement a dlfcn.h file based on opengroup's definitions of
644 kes First cut plugin directives.
646 kes Apply patch from bug #1049 to prevent stripping the path on a
648 kes Attempt to fix bug #1047 where stripping a path corrupts the
649 heap. Waiting for feedback.
650 kes Correct the Mount message not to suggest labeling a new tape
651 when doing a restore. Submitted by email by John Stoffel.
652 kes Attempt to work around gcc FORTIFY_SOURCE bug that crashes the
653 FD by using casting. Reported in bug #1042.
655 kes A bit of crypto cleanup. More later.
657 Release Version 2.2.8
659 kes Apply patch from Martin to correct bug #1040, bscan sets existing
661 kes Fixed important spelling error in doc -- bug #1045.
663 ebl Fix bextract to be able to extract non-portable Win32 data to
665 kes Move initialization of read/write res lock earlier in the code.
666 This fixes the crash with a null conf file. This fixes bug
668 kes Redefine CURES in lib/parse_conf to be URES and move it all
669 into lib/parse_conf.c -- this responds to bug #1042, but does
670 not fix it. The fix is not to compile with FORTIFY_SOURCE.
671 kes Backport to 2.2.8 fix de-referencing a NULL pointer in the scanner from
672 the trunk SVN. I don't think this was reported as a bug.
674 ebl Fix a bug during tape initialization with MTSETDRVBUFFER.
676 kes Fix Win32 build with new .def files and DLL_IMP_EXP ...
678 kes Add DataDespooling and DataCommitting status (committing is
679 the last despooling).
680 kes Finish implementation of new reservations code noted below.
682 kes Fix bsnprintf for float point numbers. I broke recently when
683 parameterizing some variables. This fixes bug #1036.
684 kes Undo recent reservations changes ... will apply them later
685 when they work better.
687 ebl Fixes #1034 which cause mysql to hang the connection after 8h
688 ebl Change default statistics target of filename.name and path.path
689 fields for PostgreSQL. This speeds lookup by indexes. Thanks
691 kes A few more tweaks to new reservation code. Make sure to clear
692 vol released flag when retaking volume. When reading label and
693 label is bad mark volume unused. When recycling, mark volume
694 unused so it can be renamed.
696 kes Fix reserve_volume() so it doesn't release a volume in use
697 (i.e. a volume entry not marked released). This should be
698 the last part needed to fix bug #1018.
700 kes Move Heartbeat documentation from Job to Director resource.
701 This fixes bug #1033.
703 kes Fix existing switch drive SD code to call autochanger to release
704 any old volume. This must be done to keep the autochanger from
705 releasing subsequently newly reserved volumes in doing a close().
706 This should fix bug #1018.
707 kes Fail if attempting to get console input in batch mode. This
708 should help fail RunScript console commands that are incomplete.
709 kes First cut implementing switch_drive() in SD (not actually called).
711 kes Implement first cut running console commands in a RunScript.
713 ebl Fixes bug #1028 where 'Selection Type' option was not usable
715 ebl Fixes bug #897 and bug #1005 where bacula doesn't display runscript
718 Release Version 2.2.7
720 kes Add new free_tls() entry point so that Win32 builds.
721 kes Fix compile warning in src/lib/util.c
722 kes Fix entry point for edit_job_codes() so that Win32 builds.
723 kes Fix seg fault Frank Sweetser reports in regression testing
724 on his systems. The problem was that the original author of
725 bsnprintf.c did not take into account the side effects of
726 using ++x in the argument to a #define.
727 kes Make SD protocol backward compatible with version 2.2.x.
729 ebl Fixes bug #1015 where bacula failed to restore acl to a socket
730 because Bacula no longer restores sockets.
731 ebl Always use ignorecase fileset option on win32 FD.
733 kes Apply patch from Michael Stapelberg <michael@stapelberg.de>
734 that implements double quoting include names in conf files,
735 and also allows piping input by having the first character
736 be a vertical bar (|).
737 kes Apply patch from Bastian Friedrich <bastian.friedrich@collax.com>
738 that implement %f in RunScripts to pass the FileSet name.
739 kes Skip leading | when lex input comes from a pipe as suggested
740 by Michael Stapelberg <michael@stapelberg.de>.
742 kes Apply patch for bsmtp Win32 daylight savings time fix supplied by
743 Nerijus Baliunas <nerijus@users.sourceforge.net>
745 kes Implement Plugin Directory and plugin events.
747 kes Implement a security enhancement: TLS authentication but no
748 encryption. Enabled by setting 'TLS Authentication = yes'.
749 Note when this is on, TLS encryption is turned OFF!
751 kes This patch corrects a problem where the maximum concurrent storage
752 jobs counter gets out of sync during restore jobs causing jobs to
753 'wait on max Storage jobs'. This patch fixes bug #1009.
755 kes This patch fixes bcopy so that it produces correct Volumes.
757 kes This patch eliminates spurious output to the console during a VerifyVolume
758 job that contains encrypted data. It fixes bug #1024.
760 kes This patch prevents the 'status dir' command from trying to use a scratch
761 volume and possibly moving it from one pool to another. This patch fixes
764 kes Add new include to postgresql.c suggested by Marc Cousins so
765 that it compiles correctly with pgre version 8.3.
767 kes Fix --archivedir addition to configure. Replace it with
768 --with-archivedir in configure.in This fixes the regression
770 kes This patch fixes bug #1012 where the job is canceled because
771 of Max Run Time exceeded when the job has not yet started.
773 ebl Apply Richard Mortimer patch that fixes #1016 when there are more than
774 one 'part' to write. Instead of each part being stored on disk,
775 written to DVD, then deleted from disk, all parts are written to disk,
776 and only the last is written and deleted from disk.
777 kes This patch fixes the status command to include the formating string for
778 JS_AttrInsterting. It fixes bug #1021.
779 kes This patch should fix the Mac OS X build problem on the latest
780 Darwin, where sys/types.h was not included correctly (apparently
781 due to a change in the Mac headers). The solution was to explicitly
782 ensure that it is defined for the ./configure.
783 This patch also has a rebuild of configure that includes the Debian
784 qt4 patch to check for qmake-qt4. This patch fixes bug #1020.
785 kes This patch should ensure that queued messages to the console are
786 displayed as soon as possible. It should fix bug 1007, but has been
787 reported not to work.
789 kes This patch fixes the infinite loop when trying to increase the
790 maximum number of volumes in a Pool during the add command.
791 This patch fixes bug #1008.
793 Release Version 2.2.6
795 db Remove extra data on estimate command in joblist for bat.
797 kes Cleanup of code in SD that sets the LastWritten date. This doesn't
798 really change anything, but is the beginning of doing it *right*.
799 To do it completely right the LastWritten date must be passed to
800 the SD, but it is not yet done.
801 kes Minor tweaks to some bat restore SQL.
802 kes This patch fixes bug #1003 where putting the message output from
803 a Verify job into the catalog results in a recursive loop. The problem
804 seems to show up only with postgresql (to be verified).
805 kes Correct %x to %p in postgresql debug statement.
807 kes Fix bug #942 where lots of emails where generated when the heartbeat
808 interval was low and Bacula wanted a different tape from the one in
811 ebl Add new SD despooling attributes and Dir inserting attributes
812 job status codes in the catalog (Status table).
814 ebl Use qmake-qt4 instead of qmake when available (debian system).
816 kes Add a security warning to src/cats/make_catalog_backup.in indicating
817 that passing the password via the command line (arg 3) is insecure.
818 This responds to bug #990 (it doesn't fix it).
820 kes Set default debug_level to zero. This corrects bugs #991 and #993.
821 kes Fix a crash in bat when it cannot connect to the Director for example
822 if the Director is not running.
823 kes Remove redundant INDEX (JobId) from File table in the trunk.
825 kes Make explicit exception to GPL in LICENSE to permit linking
826 the Win32 FD with Microsoft VSS code.
827 kes Apply the Solaris package patch from
828 Masopust, Christian <christian.masopust@siemens.com>
829 kes Apply the patch to optionally add a timestamp in the debug output
830 submitted by Mariusz Czulada <manieq@wp.eu>.
832 ebl Use PQerrorMessage instead of PQresultErrorMessage in postgresql
833 backend (sql_strerror). Fixes bug #989
835 kes Apply Michael Short's <mdshort@gmail.com> Win32 regress patch.
836 It applied with no problems.
837 kes Add PATH command to SunOS part of mtx-changer.in so that sed and
839 kes Redirect stderror to stdin on mt status command in mtx-changer.in
840 since the status is returned on stderr on Solaris.
841 kes Activate Close button on tray-monitor window. This fixes
843 kes Check for NULL item in parse_conf.c before calling it. In the
844 case of Device, there is no item and this caused a seg fault when
845 Device appears in the conf file.
846 kes Add a #define __CONFIG_H when including config.h in bacula.h. This
847 avoids pulling in config.h multiple times in some new code.
849 kes Fix spurious warning message printed when creating a volume with
850 a LabelFormat. This fixes bug #976.
852 Release Version 2.2.5
854 kes Add JobId in place of Job name in all the Jmsg() output.
855 kes Correct the APP_DESC for the Win32 storage service (remove an e).
857 kes Make maxvol-test and new more strict maxvol2-test work.
858 kes Print JobId in all Jmsg() job output.
860 kes Add new SD despooling attributes and Dir inserting attributes
861 job status codes. This fixes bug 961.
862 kes Fix Win32 drive display in bat version browser. Fixes bug #962.
864 kes Fix doc issue. This fixes bug #963.
865 kes Fix listing performance problems in bat. Pointed out by
867 kes Remove old debug code.
868 kes Fix bat code that tests for Win32. This should fix bug #968
869 kes Query 5 list wrong Vol after migration. This fixes bug #960
871 ebl Fix #969 where user can't change Replace option in restore menu.
873 kes Save jcr in thread specific data (tsd) for each thread.
874 kes Make Dmsg() print JobId as -%u.
875 kes Make Jmsg, Emsg, and others automatically pickup the jobid
876 for the thread if it exists.
877 kes Remove old reservation debug jid code.
878 kes Remove get_jcr_from_tid() from OpenSSL and tls code.
879 ebl Add an option that permit to specify spool size in job
880 definition. (Applying patches/testing/spoolsize_per_job.patch).
881 You must upgrade SD and DIR at the same time.
882 dvl Add new configuration item --archivedir
883 dvl Adjust regression tests to use tmp not /tmp. This will allow
884 multiple concurrent runs of the regression tests.
886 kes Fix race condition that drops final block written to volume.
887 This happens in rare cases with multiple simultaneous jobs
888 when the Volume fills. This fixes bug #964. May be related
889 to bug #935 and possibly #903.
890 kes Eliminate more strerror() and replace with bstrerror().
891 kes Remove BSD getopt and replace with unrestricted IBM version.
892 kes Fix Win32 build for changed calling sequences.
893 kes More tweaks to the mount volume routines to get everything
894 right. Changed variable name from find to have_vol, which is
895 much easier to understand.
896 kes Enhance btimer debug code.
898 kes Fix FD->SD authorization failure, which was due to spurious
899 wakeups from a pthread_cond_timedwait(). Simply check the
900 predicate before continuing. This fixes bug #953.
901 kes Add const char where needed (more to do). Remove temp debug code.
903 kes Setup SQLite busy handler before doing queries. Fixes bug #967.
904 kes Don't overwrite error message in check_tables_version.
906 kes Unlock batch insert tables with same calls used elsewhere.
907 kes Allow starting 59 jobs a second.
908 kes Make SD session key more random.
909 kes Add retry for SQLite opening db if it fails. Probably helps
911 kes Suppress extra error messages during batch insert failure.
913 kes Add jcr to timer packets so if killed message can be sent to job.
914 kes Add JobId to all Dmsg() output.
915 kes Put some FD auth code on dbglvl rather than fixed.
916 kes Return insert attributes error message in db msg buffer to avoid
917 false error messages. Helps fix bug #966.
918 kes Separate batch init error messages. Probably helps fix bug #966.
919 kes Make SD code that contructs attribute insert check string lengths
921 kes If Dir gets an error during inserting attributes, cancel SD.
922 This reduces unnecessary error messages.
924 kes Correct search boolean for getting Volume info
925 ebl Cleanup batch insert code. Probably fixes bug #965.
926 kes Back out one small change to the reservation system (reserving a volume).
927 kes Rework how a Volume is mounted. It is now much more intelligent and
928 will always attempt to use any mounted volume if possible and reduces
929 calls to the Director asking about volumes.
931 kes Turn off some code when batch insert not enabled.
932 kes Edit FD name in connect error messages.
933 kes Rework the reservation system to take into account that the Director
934 might give us a Volume that is different from the current one being
935 used, and to ensure that we don't exceed Maximum Volume Jobs.
936 This fixes (mostly) bug #947 ' Maximum Volume Jobs = 1 produces
937 fatal error with multiple jobs running'
938 kes Add more debug code in reservation system.
939 kes Implement maxvol-test to check bug #947.
941 kes Add code to handle tray monitor separated from Win32 FD.
942 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
944 kes Add missed return in fixing verify bug -- trunk only.
945 ebl Fix a command parser issue causing a director segfault.
946 kes Fix ANSI tape labeling. Fix restoring ANSI labeled Volumes.
948 kes Increase the max block size to 4MB fixes bug #957.
949 kes ERABT if user sets min block size > max block size. Fixes bug #956.
950 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
951 is not properly mounted (recognized) during a poll.
952 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
953 Job that has differences reports Verify OK.
954 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
956 ebl Add an option to operate on all pools with update vol parameters.
957 This complete the project 20. Patch from Nigel Stepp.
958 ebl Add history support to bconsole when using readline.
959 Using Ctrl-D to exit doesn't update .bconsole_history
960 kes Modify new volume algorithm to use max MediaId for generating next
961 volume number rather than the count of Volumes. This should essentially
962 eliminate the failure rate if some volumes were deleted. Bug #921.
963 kes Begin implemention of Optimize Job Scheduling.
964 kes Implement restore callback that Dirk and I agreed on for bat
965 restore. This fixes bug #928. Restore of backup of zero files fails.
966 kes Fix SQL Catalog logging which broke with new db_escape_string
969 Release Version 2.2.4
971 kes Fix bacula_cats.def for new db_escape_string().
972 kes Increase size of name string when FD making connection to SD.
973 May fix bug #953. FD->SD connection failure.
975 kes Add code to help Dan debug 2drive-incremental-2disk test.
976 kes Add code to try to fix bug #908.
977 kes Add waits to multiple exit detection code to try to force pid
978 file to always be deleted.
979 kes Restore good dev.tar.gz to rescue set appropriate binary property.
981 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
982 trying to switch drives by checking for blocking before unblocking.
984 kes Cancel storage daemon in all cases where FD reports error. This
985 should fix virtually all cases of bug #920.
986 kes Fix db_escape_string() for MySQL which did not compile.
988 kes Fix error message that was clobbered when Dir tells SD it does not
989 have write permission on Volume. This should fix a minor point
990 in bug #942, but not the main problem.
991 kes Add code to cancel job in SD if FD connection fails. This should
993 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
994 dvl Pass jcr and db into db_escape_string() to enable better escaping
996 kes Fix migration code to get correct Volume name with multiple volumes
997 by skipping |. Fixes bug #936.
998 kes Implement patch supplied by Landon to fix bug #944 where using
999 TLS with bconsole uses 99+% of the CPU.
1000 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
1002 kes Move patches into patches directory.
1004 ebl Fix bug #946 about 'bacula-dir -t' which doesn't works
1007 ebl Using 'm' in bconsole will show messages like before,
1008 and not memory usage.
1009 kes Fix bug #935, and probably also bug #903 where files were not
1010 restored. MediaId was not properly set in JobMedia record after
1013 kes Suppress chown and chmod error messages if the FD is not running
1016 kes Apply Martin Simmons' patch that should turn off the new API usage
1017 when batch insert is turned off allowing building on older
1019 kes Add ./configure search in qwt-qt4 for qwt package
1021 kes Bacula is now free of 3rd party GPL copyrighted code!
1022 kes Remove idcache.c
1023 kes Add guid_to_name.c/h which replace idcache.
1024 kes Remove enh_fnmatch.c. Make code that references it use fnmatch.c
1026 ebl Detect if new PosgreSQL batch insert API is present.
1027 kes Correct incorrect mempool call causing Director crash. Occurs on
1028 systems without va_copy().
1029 sb Update spec files for 2.2.1 release
1031 kes Fix memory pool call in ua_output.c. bug #934.
1032 kes Replace fnmatch.c and fnmatch.h by modified BSD versions.
1033 Add test program to fnmatch.c
1035 kes Integrate patch to README.vc8 from
1036 Hederer Jean-Sébastien <hedererjs@asperience.fr, had to manually
1037 edit it to get it into Unix patch format.
1038 kes Implement mkpath.c to replace old FSF makepath.c
1040 kes Implement savecwd.h and savecwd.c. Remove FSF versions.
1042 Release Version 2.2.1
1044 kes Update POTFILES.in
1045 kes Cleanup a few underquoted AC_DEFUNs in configure
1046 kes Apply patch from Martin Simmons that adds a test for va_copy to
1049 kes Fix bug #921 by increasing the number of tries to create a new volume
1051 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
1052 can be called multiple times. Implement a version for machines
1053 without va_copy() that gets a big buffer.
1055 kes Integrate more portable zone offset code into bsmtp.c
1056 Submitted by Attila Fülöp.
1058 kes Fix bad SD->FD return status reported by
1059 (James Harper) <james.harper@bendigoit.com.au>
1060 ebl Fix a bug in read_close_session which return random status
1061 thanks to James Harper
1063 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
1064 and directory names during restore of single file/directories.
1065 kes Add sanity checks to .sql command when string is empty. Hopefully
1066 that will resolve Dirks Director crash.
1068 kes Apply patch submitted by Martin Simmons that corrects a seg fault
1069 in the bsmtp chat subroutine when debug is >= 10.
1071 kes Fix Director crash when running bat SQL queries.
1072 kes Add David's notes on Item 8: Copy pools.
1074 kes Rework projects file to be current and ready for a vote.
1075 kes Enhance lex scanner error message.
1077 kes Tweak LICENSE file to mention BSD code.
1078 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
1079 if specified on the ./configure.
1080 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
1081 This class is intended to allow us to open a second bsock to the
1082 Director while in the restore subdialog.
1084 kes Fix configure to create bat Makefile before creating dependencies.
1085 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
1086 kes Add a tooltip to the tray monitor.
1087 dvl Set the Director's PID file before dropping privs. This fixes
1090 kes Update AUTHORs file
1091 kes Increase the default max concurrent jobs to 20 in FD and SD to
1092 correspond with the default .conf files.
1093 kes Rewrite the Win32 service routines. This eliminates the 3 copies
1094 some different, of the same file created by RN when porting the
1096 kes Rearrange some of the Win32 directories and the placement of the files
1098 kes Set DEVELOPER flag in version.h
1100 ========================================================================
1101 Release Version 2.2.0
1103 kes Apply a second doc patch from Marc.
1104 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
1105 improves the tips section that discusses how to setup multiple
1108 kes Update bat README file.
1109 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
1110 corrects a typo in the Recycle status check in db_find_next_volume().
1111 This will probably fix a number of annoying problems with multiple
1113 kes Modify most of dird/msgchan.c to use bsock class calls rather than
1114 bnet calls -- no functionality change.
1116 kes Modify the Verify output to specify if files are missing on
1117 the Volume(s) or disk. Fixes confusion in bug #916.
1118 kes When more than one Volume is read in a migration job, the last
1119 Volume bytes reported are from the last read volume rather than
1120 the last written volume. Fixed. This fixes bug #910.
1121 kes Fix display of Recycle flag after update volume=foo recycle=yes.
1122 It previously printed New Recyle flag is: no. This fixes bug
1125 kes Correct seg fault when switching tape drives during restore.
1126 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
1127 be used until after 2.2.0 release.
1129 kes Remove fnmatch() in SD that permitted wild card specifications.
1130 This fixes bug #914.
1132 kes Fix %g in filename returned by SQL for browse tree reported by
1134 kes Fix configure so that it puts config.out in the cwd rather than
1136 kes Attempt to fix the locking problem reported by Eric in bug #906.
1137 kes Make berrno class to leave errno unchanged after constructor call.
1138 kes Make bnet_server use the heap rather than the stack to allocate
1139 its socket fd pointers to avoid a crash at termination. Problem
1140 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
1142 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
1143 and putting it in depkgs-qt along with Qt4.3.
1145 kes Rework code in acquire.c that switches drives for reading when
1146 the Media Type does not match. This should fix bug #906
1148 ebl Fix a director segfault during job setup #907
1149 kes Correct seg fault in postgresql when first operation returns no
1150 rows. Fixes Dirks File browser problem seg fault with bat.
1152 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
1153 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
1156 kes Implement PopUp YES/NO dialog for bat.
1158 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
1160 kes Correct RunScript to terminate job in FD on failure.
1161 kes Change abort_on_error and AbortJobOnError to fail_on_error
1162 and FailJobOnError in RunScripts.
1163 kes Minor tweaks of code formating in RunScripts, principally to
1164 avoid depassing 80 columns.
1166 kes Eliminate one #ifdef Win32 in bsmtp
1167 kes Implement grow tool to grow a file for testing very large databases.
1168 kes Add big-vol-test to test Bacula seeking with > 5GB.
1171 kes Modify find_next_volume() to return all values in Media record.
1172 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
1176 kes Update Release notes
1178 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
1179 Warning, in previous beta version, all media get from scratch keep their
1182 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
1183 This should fix bug #842. Made a note to look at removing the temp
1184 files at the end of the install.
1185 kes Add ability to mount and unmount a file device providing it is
1186 marked as being removable and has the appropriate mount and unmount
1187 commands defined in the Device resource. This fixes bug #830.
1188 kes When applying a storage override, release all previous storage
1189 definitions rather than just prepending the new storage.
1190 This should prevent a good deal of confusion.
1192 kes Implement ./configure search for qwt libraries.
1194 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
1195 Win32 FD. This should fix bug #893.
1196 kes Remove an unnecessary beep in Win32 init code.
1197 kes Update copyright dates in Win32 executable about boxes.
1198 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
1199 code with a BSD getopt.c and getopt.h.
1200 kes Remove sched.h from the Win32 compat directory -- not used.
1201 kes Remove the Exit menu item from the Win32 tray monitor. If you really
1202 need to shut it down, do it through the services panel or the command
1204 kes Remove some inappropriate Bacula FSFE copyrights.
1205 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
1206 kes Fix regress config non-portable test as pointed out by
1207 Florian Heigl <florian.heigl@gmail.com>
1208 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
1209 as pointed out by Florian Heigl <florian.heigl@gmail.com>
1211 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
1212 Reported by Frank Sweetser.
1216 kes Fix client-only build.
1217 kes Integrate client-only fixes for bsys (initgroups) and conio from
1218 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
1219 kes Make arguments to get_scratch_volume() in same order as other
1221 kes Rework the prune_volumes() subroutine so that after purging and
1222 no volume found in desired pool, it will check for a scratch
1223 volume. This prevents recycling the whole scratch pool.
1224 kes Add code to status storage to print boffset_t (largefile support).
1226 kes Move qwt (Graphics libarary for Qt4) to depkgs.
1227 kes You now need a --with-qwt=<dir> to be able to build bat.
1228 kes Update src/win32/cats/bacula_cats.def to include the new
1229 db_get_query_dbids() call on Win32.
1231 kes Correct a problem when selecting a scratch volume and moving
1232 it to another pool that lost some columns.
1233 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
1234 kes Enhance Autochanger error messages to include Volume and device name.
1235 kes Rework prune_volumes() code to take account of InChanger flag,
1236 and to handle recycling volumes going to the Scratch pool and
1237 current pool because the RecyclePool directive.
1238 kes Implement a better and more efficient db_get_query_dbids() to
1239 handle creating and passing back a list of DBIds.
1243 kes Start work on new more efficient DBId subroutine. First use
1244 will be for recycling volume to Scratch inchanger.
1245 kes Increase number of JobIds in pruning from 1000 to 10000.
1246 This to be replaced by above routine.
1247 kes Begin implementation of building Qt4 on Win32.
1248 kes Correct typo in fix I added for bad TLS shutdown.
1249 kes Pull 2.0.3 patches into patches directory.
1250 kes Update Release notes. Include qt-console in line count.
1251 kes Update Projects file.
1253 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
1254 bug in migration code where a job that spanned two volumes
1257 kes Implement new BST_DESPOOLING blocked state. Change from locking
1258 during despooling in SD to blocking. This means that other threads
1259 can work with the device structure, in particular the reservations
1260 system while despooling.
1262 kes Fix return in reservation message queue that missed clearing
1263 the jcr lock (implemented 26Jun07 below).
1264 kes Rename a number of dev methods to make locking function names
1266 kes Document locking in lock.c. Move lock structures to new file
1269 kes Move reservations message lock to lock jcr only this
1271 kes Move main SD locking code into lock.c (new file).
1272 kes Update Win32 build to include lock.c
1276 kes Dirk committed the qwt library code for drawing graphs in bat.
1277 kes Tweak install of qwt so that it is integrated with ./configure.
1279 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
1280 out by Eric (my typo).
1281 ebl Fix configure.in to get batch mode enable
1282 kes Return correct string from authenticate.cpp in bat when connecting
1284 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
1285 spurious line drops when using TLS.
1286 kes Do not file reparse points when restoring a file that already
1289 kes Implement Windows reparse points -- similar to directories, but
1290 we do not descend into it. This is a first cut. They seem to
1291 be backed up, but restore is not yet tested.
1292 kes Remove restore_blocking in tls code when shutting a socket to leave
1293 it in blocking mode. Hopefully this will fix the encryption bug
1294 reported by Frank Sweetser.
1295 kes When opening a file for backup, tell the OS that we are going to
1296 read it sequentially -- optimization.
1297 kes Change variable names in authenticate_director() to not conflict
1298 with member names in bat. Caused great confusion with compiler,
1301 kes Queue openssl error messages in case of comm problem.
1302 kes Do shutdown() call if socket terminated.
1303 kes Remove some duplicated code in tls.c
1304 kes Move more of the bsock member variables into private and access
1306 kes Add Frank Sweetser's tls-test to the regression suite.
1308 kes Add Swedish sv.po file
1310 kes Don't print clock skew message in FD if less than 3 seconds diff.
1311 kes Add a bit of VSS info to status client.
1312 kes Implement a first cut of Vista VSS, using Win2003 code.
1314 Release: 2.1.20 beta
1316 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
1317 loaded tape but uses first drive).
1318 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
1319 This was indeed a Win32 issue.
1321 kes Simplify search of autochanger for in-use Volume.
1322 kes Fix exit condition of check for in-use volume. kes Remove
1323 inappropriate my_postgresql_free_result() in db_close()
1325 kes Fix bad return in FD when encryption signature not found.
1326 Probably caused a crash.
1327 kes Inhibit missing encryption signature error messages for
1328 file types where no signature computed.
1329 kes Correct inverted check on autochanger in reservation system.
1330 kes Tweak debug code in autochanger reservation.
1332 kes Add some additional locking in the cats directory in subroutines
1333 that modify packet variables called from batch insert.
1334 kes Rework how dcrs are allocated. new_dcr() can now be called
1335 with an existing pointer, and it will simply clean it up.
1336 This allows the reservation system to test various different
1337 devices, and will permit easy device changes.
1338 kes A bunch of changes all over to handle new new_dcr() calling
1340 kes Work more on the Volume management in the SD. Remember Volumes
1341 for tape drives and for autochangers (even virtual disk changers).
1342 kes When looking at the Volume list to reserve a drive, handle
1343 autochanger names correctly by interating through the changer
1344 devices. Also call the Director to see if a Volume is suitable
1345 for the current job.
1346 kes Fix some bugs in bscan. Make sure all media records are written.
1347 Make sure that valid JobMedia records are written for disk files.
1348 Previously they were completely wrong.
1349 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
1350 that the URLs don't change and so that the developers will all
1351 work off the same copy. Rebuild from scrach.
1352 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
1354 Release: 2.1.18 beta
1356 kes Fix seg fault in FD from incorrect digest size.
1357 kes Fix argument to non-OpenSSL crypto.c subroutine.
1359 Release: 2.1.16 beta
1361 kes Remove a few malloc()s from the encryption code.
1362 kes Use the class calls to bsock in filed/backup.c and restore.c in
1363 place of the old bnet_xxx code.
1364 kes Implement code that does an on the fly calculation of the
1365 signing digest during restore of encrypted files. It makes
1366 a best guess at the algorithm, and if it is not correct, will
1367 then revert to the old code which reads the file after it is
1369 kes Implement at least one missing crypto stream in stream_to_ascii()
1370 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
1371 #877 where a reload with bad syntax causes Dir to exit.
1373 Cut: 2.1.14 beta (not released)
1375 kes Do not free a volume on a tape drive until another volume is
1376 mounted and read, or the autochanger unloads the volume.
1377 This should help the SD re-use volumes that are already mounted,
1378 and should fix bug #886.
1379 kes Apply patch from user brettedgar that allows gnome2-console include
1380 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
1381 kes Apply patch from Lucien Weller that fixes day of week calculation
1382 because of DST flag problem. Fixes bug #887.
1384 kes Move find_next_appendable_volume() to after acquiring a valid device
1385 in reserve.c. This fixes bug #864 -- confirmed by reporter.
1387 kes Unable to reproduce bug 872. However added additional testing for
1389 kes Bug #874 resolved by documenting SQLite limitations.
1390 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
1391 kes Bug #881 resolved by removing typo in mtx-changer script.
1392 kes Made Frank Sweetser's wiki the official Bacula wiki with his
1393 approval. Added a link to the wiki on the web page, and implemented
1394 a backup from http://paramount.ind.wpi.edu
1396 kes Fix update allfrompool to pass pool name.
1398 kes Convert to pure GPL v2 license.
1399 kes Fix sscanf problems reported by Peter Buschman that caused
1400 a bus error on Solaris.
1401 kes Rework (simplify) the select prompt in bat.
1402 kes Move get_jobid_from_tid() into lib and create a
1404 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
1405 should definitely fix the problem of lost error messages in the
1407 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
1408 kes Eliminate tcpd.h from the project. Enclose the #include from the
1409 library with extern C ...
1410 kes Add print of signal name when a signal is trapped.
1412 Release: 2.1.12 beta
1414 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
1416 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
1417 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
1418 makes SQLit3 run 30 times faster, though a bit less safe.
1419 kes Implement --with-batch-insert in configure and detection of thread
1420 safe libraries. It is on by default, but turned off if no thread
1421 safe library (e.g. SQLite 2) is available.
1423 kes Fix Bacula PostgreSQL buffer overruns.
1424 kes Do better checking for NULL results returned from PostgreSQL;
1425 implement retry for failed queries; clear results buffer after
1426 failed query. Hopefully this will correct the PostgreSQL failures.
1428 kes Implement algorithm to handle only one appendable volume with
1429 Prefer Mounted Volumes = no.
1430 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
1431 returned from a query.
1432 kes Make volume lock recursive.
1433 kes Implement an additional volume reservation algorithm that
1434 starts by considering all reserved volumes then uses the
1435 old brute force algorithm of searching the resources to
1436 find a suitable device.
1437 kes Add new reservations debug code and refine the old code.
1438 kes Update the win32/dll/bacula.defs file.
1440 kes Tweak reservations algorithm to permit a few more cases, i.e.
1441 volume reserved, but on different drive, ...
1442 kes Enhance SD status to include Pool and Media Type for drive in a
1443 more readable format (a bit longer).
1444 kes Fix PostgreSQL double free.
1446 kes Minor refactoring of restore decryption code.
1447 kes Add code to smartall.c to detect double free of a buffer.
1449 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
1450 so that bsmtp will create a correct email address (mailbox only).
1451 kes Modify 'memory' command so that the buffers are listed as 'In use'
1452 to avoid confusion with Orphaned buffers.
1453 kes I reworked the OpenSSL include/lib flags to be handled in
1454 the standard Bacula way, which should fix bug #863 concerning
1455 non-standard OpenSSL libraries.
1457 kes Implement Help Browser window for bat.
1458 kes Fix reload bug that reset StorageId to zero.
1460 kes Fix TLS #ifdefing when TLS turned off.
1461 kes Ensure that when labelling a tape with Slot=0 that InChanger
1463 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
1465 kes Add StartTime to final uar_sel_jobid_temp query so that we can
1466 add DISTINCT (required by PostgreSQL).
1467 kes Implement BSOCK authenticate_director() method. Eventually will
1468 authenicate all daemons.
1469 kes Move several more functions into the BSOCK class.
1471 kes Add code to tell the OS that we no longer need a cached
1472 file that we were reading. In findlib/bfile.c. Also,
1473 only cache files that we are reading. Thanks to
1474 Tobias Oetiker <tobi@oetiker.ch> for the idea.
1475 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
1476 kes Implement script to automatically generate cats and dll .def
1477 files for Win32 dll.
1478 kes Update README.mingw32 to include new .def file generation.
1479 kes Correct typo in UTF-8 error message as reported by:
1480 jhernandez <julianhernandez@gmail.com>
1481 kes Add additional sm_check() code on debug level 1.
1482 kes Set default debug level to 1.
1483 kes Trap SIGABRT in attempt to get traceback.
1485 kes Reduce bat connect timeout from 30 to 15 seconds.
1486 kes More restructuring and implementing BSOCK class in place of
1488 kes Remove a few unnecessary malloc() tests in crypto code.
1489 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
1490 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
1491 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
1493 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
1495 kes Fix Verify InitCatalog. The attributes were not pointing to the
1496 correct saved location.
1497 kes Implement message callback so that GUI is sure to get all
1498 daemon messages. Currently displayed in a dialog in bat.
1499 kes Ignore SIGUSR2 (Bacula timer) in bat.
1500 kes Apply regress patch from bug #859 to allow regress to work
1501 with Solaris compiler.
1503 kes Begin adding TLS support to bat.
1504 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
1505 clean up lex.c and make it more readable.
1507 kes Move more bnet functions into the BSOCK class.
1508 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
1509 kes Complete change of berrno strerror() method to bstrerror()
1511 Release: 2.1.10 beta
1513 kes Cleanup incorrect email addresses in bsmtp.
1514 kes Make bat display initial messages rather than discard them.
1516 kes First cut of adding .mod to the run command.
1517 kes Implement auto display of messages in bat.
1518 kes Enhanced preferences to allow all Bacula output to be
1521 kes Try to make bsmtp date routines more generic.
1522 kes Fixed bug #856 autochanger documentation.
1523 kes Rework bsmtp date editing for Win32. This fixes bug #854.
1524 kes Add new cats entry point so Win32 builds.
1526 kes Attempt to fix bsmtp date editing on OSes without %z editing.
1528 kes Do better checking for the MySQL 64 bit libraries looking for both
1529 .a and .so libraries.
1530 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
1531 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
1532 kes Require the thread safe version of MySQL during configure. Thanks
1533 to Andre Noll for pointing this out.
1534 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
1535 continuing in migration code.
1536 kes Apply implementation of tray-monitor font derived from gnome-console
1537 submitted by Andreas Piesk <a.piesk@gmx.net>
1539 kes Eliminate important memory loss in SQLite
1540 kes Fixed the batch insert MySQL thread specific data that was not
1541 being freed. See cats/mysql.c:db_thread_cleanup().
1542 kes Fix restore before command.
1543 kes Convert old hdr.name to name() in a few places.
1544 kes Implement update jobid command.
1545 kes Return all time_t dates in db_get_job_record()
1546 kes Stop watchdog in SD earlier.
1547 kes Put Pool just after Storage in please mount message.
1548 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
1551 kes Update the po files.
1552 kes Fix Verify InitCatalog by making it cache attributes.
1554 kes Change name bacula-bat to bat for man 1 page to correspond to
1556 kes Check for client and store NULL pointers in status command. This
1558 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
1559 kes Fix sign extended editing of %p.
1560 kes Clean out a little old #ifdefing in cats/mysql.c
1562 kes If time diff between DIR and FD is more than 600 seconds convert
1563 INFO message to WARNING.
1564 kes Implement heap size display in status for all daemons.
1565 kes Attempt to fix MySQL db open memory loss (not successfull).
1566 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
1567 kes Eliminate memory loss in MySQL (possibly other SQLs) during
1568 Query. This looks like a MySQL but but by doing extra releases,
1569 the memory goes away. This should fix bug #847.
1571 kes When backup fails, cancel SD before waiting for sd termination.
1572 kes If SD is waiting for FD to connect during cancel, wake up the
1574 kes Fix fsf code so that errno is correctly reported.
1575 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
1577 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
1578 so that Bacula doesn't later stumble into a seg fault.
1579 kes Use the term Restore Client in the restore Job report.
1580 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
1581 the original job's FileSetId.
1582 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
1583 spooling in migration jobs. Not yet tested.
1584 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
1585 reading conf file from a pipe. However, do it with open_bpipe()
1586 rather than popen. Not yet tested.
1588 kes Fix an ugly bug where the VolCatBytes were getting updated
1590 kes Implement bconsole memory command that prints current memory
1591 usage, plus smartalloc dump.
1592 kes Clarify some error messages in backup, admin, and migrate.
1593 kes Shrink label dialog to smaller size.
1594 kes Invert Cancel OK buttons on restore to be OK Cancel.
1595 kes More strerror() to bstrerror() conversions.
1597 kes Start implementing bstrerror() in place of strerror().
1598 kes Stripping path -- seems to work.
1600 kes Prevent door and port files from being restored (mostly
1602 kes Free an unreleased buffer in compat code.
1603 kes Change console Job name from *Console* to -Console- to eliminate
1604 Win32 filename problems. Put Win32 path separator when creating
1605 Console file. This fixes bug #846.
1606 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
1608 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
1610 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
1611 to force Win32 error message.
1613 kes First cut strip path. The data should be passed to the FD,
1614 but nothing is done with it yet.
1615 kes Enhance the digest and signature routines in the crypto
1616 library to accept a JCR and to use it to print error messages
1617 so that they will go in the Job report rather than the daemon's
1619 kes Simplify some of the verify signature code.
1620 kes Simplify a few of the alternative returns in the signature
1623 ebl Use only POSIX regex instead of GNU regex in breg.c for
1624 File relocation. It fix broken freebsd compilation.
1625 kes Convert all other Dir files to use new ua class message
1627 kes Tentative fix for missing digest signature in bug 807.
1628 kes Correct handle problem in new win32_ftruncate routine.
1629 kes Convert ua_purge.c and ua_update.c to use new ua class
1630 message routines for bat.
1632 kes Correct incorrect installation of LICENSE in Win32 installer.
1633 kes Display LICENSE at the beginning of the Win32 install.
1634 kes Attempt to correct the need for the png files to be installed
1636 kes Reapply my bat.conf install script in qt-console. I think I
1637 editted bat.pro instead of bat.pro.in and it was lost.
1638 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
1639 the /var/lock/subsys for subsysdir. Also corrects typos in the
1642 kes First cut update job.
1643 kes Correct configure to include qmake of src/qt-console directory.
1645 kes Make restore job yes/mod/no print in one command so GUI works.
1646 kes First cut implementing backup and restore client.
1647 kes Correct editing in Verify output that caused a seg fault.
1649 kes Insure that bat.conf is not overwritten during installation.
1650 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
1651 while I was implementing migration in March 2006 !
1653 ebl Cleanup file relocation, using char *RegexWhere instead of
1654 char *where + bool where_use_regexp
1655 kes Update some manpages and add bat manpage.
1656 kes Make a first cut at converting bacula.spec.in for bwx-console
1658 kes Apply patch from John Goerzen to add hostname as fourth argument
1659 to make_catalog_backup script.
1660 kes Fix typos I introduced into bsmtp.c
1661 kes Make pm_strxxx() routines handle input of NULL pointer. This
1662 is to protect from NULL pointers returned from SQL databases.
1663 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
1664 kes Add more debug to FIFO code -- fix fifo regression test.
1666 kes Implement posix_fadvise in FD, and for reading spool files in SD.
1667 kes Add thread timer to bnet_connect() to break from OS if wait time
1670 kes Update Win32 build to include new files, new symbols, and
1672 kes Implement socket level heartbeat (tcp_keepidle)
1673 ebl Commit File relocation patch
1674 kes Make bat have 'make install' target.
1675 kes Warn during install if old gnome-console binary found.
1676 kes Warn during install if old wx-console binary found.
1677 kes Add -8 option to bsmtp command line to add content type utf-8.
1678 Fixes bug #809. (Character coding problem in bsmtp).
1679 kes If < is found in target (from, to, cc) then do not enclose the
1680 target in < > in bsmtp. Fixes bug #772 (malformed address).
1681 kes When printing certain items in dbcheck, stop after 300000.
1682 Fixes bug #822. (dbcheck loops).
1683 kes Incorrect status in Dir after waiting for mount with poll set.
1686 kes Extend idea of Prefer Mounted Volumes to mean a volume about
1688 kes Print waiting to reserve a device every 5 mins.
1690 kes Don't call close_part in label.c if tape and relabel.
1691 kes Don't free volume if busy in close() -- should help with
1693 ebl Fix #824 RunScript bug (After script could be execute twice)
1694 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
1695 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
1696 Add a regression script to test RunScript
1698 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
1701 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
1702 deprecated. No additional bugs will be fixed, and they will be dropped
1703 in a future release (probably 2.4.0).
1704 kes Change name of wx-console to bwx-console to make it more Bacula
1706 kes Change the name of gnome-console to bgnome-console to make it
1709 kes Some time in March, a Feature Request with patch from Jorj Bauer
1710 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
1712 The ability for the director to validate a Client (FD) CN against
1713 an arbitrary set of patterns rather than the hostname, with
1714 A new 'TLS Allowed CN' set of directives which are implemented
1715 in the Client resource. Then pattern matching is used in place
1716 of hostname matching against the Certificate's CN. As an example, we
1717 have certificates which (a) use a local CA, and (b) have a CN of the
1719 kes Add new/changed entry points to Win32 build
1720 kes Create unaccepted-projects for projects that are not accepted.
1721 kes Simplify locking in the reservations system.
1722 kes Add more debug code in reservations.
1723 kes Make sure error condition on reserving a volume is handled correctly.
1724 kes Correct handling of volume_in_use.
1725 kes Correct handling of initializing a device.
1726 kes Move handling of broadcasting releasing a device into release_device().
1727 kes Correct attaching dcr to dev so that it is only done if device
1728 is properly initiated.
1730 kes Locking debug level tweaks in SD.
1731 kes Tweak new Volume code.
1733 kes Add exec external-command [wait-seconds] to bconsole. This
1734 executes the external-command. Note! normally external-command
1735 should be enclosed in double quotes.
1736 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
1737 it should normally be off in a production system.
1739 kes Implement die command for SD so that we can force it to dump.
1740 kes Implement SD lock debug code.
1741 kes Implement new algorithm for keeping Volume list in SD. It
1742 is now owned by the device.
1744 kes Implement new code for freeing in use volumes that should
1745 resolve if not all, some of the problems of multiple drive
1746 tape conflicts described in bug 801.
1748 kes Fix gui/bacula-web/images files in svn.
1749 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
1751 ebl Fix a bug in batch mode (in string escape)
1752 kes Correct migration prune SQL typo that crept in in a
1753 recent 2.1.x change.
1755 kes Move bnet_despool() into class in bsock.c
1756 kes Modify job report to include director name and Build OS.
1757 kes Move drop root privilege and check_catalog() before fork.
1758 kes Add update database scripts (version 9 to 10) to updatedb directory.
1760 ebl Check size and age of each file after its backup to see if
1761 it has changed during backup, if 'checkfilechanges' is set.
1762 The FD will do an extra check (stat(2)) after
1763 each file backup. mtime, ctime and size are compared with
1764 'before backup' information. If time or size mismatch, an
1765 error message will be generated. You must upgrade FD to use it.
1767 kes Make database name and user configurable
1768 --with-db-name=xxx --with-db-user=xxx
1769 kes Add back database type to message.c for debugging.
1771 kes Implement dir_sql() which issues an SQL query.
1772 kes Modify bat medialist to use dir_sql() and do some minor C++
1773 formatting as well as eliminating a number of pointers, simplifing
1776 kes Fix some of the mtx-changer grep commands for tape label readers.
1777 kes Convert a number of bsendmsg into the appropriate send/warning/error
1778 message class calls.
1779 kes Suppress the using database message in the .sql command.
1780 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
1782 kes Add context menu for floating a window.
1783 kes Some minor cleanup and name changes in qt-console
1784 kes Add doing mt setblk 0 in Win32 mtx-changer.
1785 kes Apply Martin's bug fix to move definition of ENODATA for
1787 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
1788 sqlite2 and sqlite3.
1790 kes More pruning cleanup.
1791 kes Turn on wait_for_drive by default in mtx-changer.
1792 kes Turn on Batch insert code by default as it now passes regression.
1793 kes Add ./configure --enable-bat to enable building of Bat.
1794 No install yet though.
1796 kes Implement a new .sql command for bat.
1797 kes Implement code to turn off pruning in obtaining the next volume.
1798 Pruning is turned off for the status dir command, but turned on
1799 for SD requests and for the list nextvolume command.
1801 kes Correct Qmsg() that was not updated correctly when committing a
1802 previous change (probably the recent TLS patch).
1804 kes Write new subroutine is_volume_purged() that explicitly checks
1805 if the Volume is purged, and if so marks it as such. This should
1806 resolve problems reported about needing to mount twice to recycle
1808 kes Rewrite pruning algorithm to do more work in the SQL engine, and
1809 to pass a list of JobIds to be deleted to SQL. Also, minimize the
1810 amount of duplicated code.
1811 kes Do volume pruning only for the Media Type desired (reduces pruning time
1812 if multiple Media Types are in the same pool).
1813 kes Implement more detailed info in the Job report for the Bacula version
1815 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
1817 ebl Add bbatch tool to bench database and insert mode.
1818 Fix sql quote stuff in batch mode
1819 Fix sql stuff for mysql
1821 kes Correct problems with am/pm scheduling. Fixes bug #808.
1822 kes Implement new prunning code that prunes up to 1000 jobs at
1823 the same time. The same technique can be applied to a number
1824 of other prune/purge subroutines.
1825 kes Add an insanity check when starting a new tape job to ensure
1826 that the tape position has not been changed. If so fail the
1828 kes Fix Win32 build for dlls to add the folllowing:
1829 src/lib/bsock.c -- new file with new entry points
1830 src/lib/dlist.c -- new entry points
1831 src/cats/sql_create.c -- new entry point
1832 src/cats/sql_cmds.c -- new DATA item exported
1834 ebl batch mode cleanup bscan-test is ok now.
1835 kes Implement SD code to check length of disk volume before appending.
1837 kes Correct return status on db_batch... routines.
1838 kes Add call to db_write_batch_file_records() to migration code.
1839 ebl Fix AfterJob timing
1840 kes Move the checking of the database in initializion of the Director
1841 to after we drop privileges. This avoids the need for both root
1842 and bacula access to the DB.
1843 kes Correct a misplaced variable definition in src/filed/backup.c
1844 kes Correct how the new batch insert db_create_attributes_record()
1845 uses the arguments. Caused a seg fault in bscan.
1846 kes Implement lock() and unlock() methods in DEVICE class.
1847 Implement block() and set_block(xx) methods in DEVICE class.
1848 kes Modify bnet_connect() so that it uses time() to check for the
1849 wait time expiring (on some OSes, some system calls may not
1850 return immediately).
1851 kes Modify Verify to obtain the previous JobId when it is actually
1852 running rather than at schedule time (as it was in 1.38.x).
1853 kes Fix src/job.c to handle MaxWaitTime correctly. This should
1855 kes When checking pid in pid file, continue running if the pid is
1856 the same as ours. This occurs on IRIX after a system crash.
1859 kes Extend new GUI API.
1860 kes Make the ua structure a class, and implement send_msg(),
1861 error_msg(), warning_msg(), and info_msg().
1863 kes Apply fix from for building wx-console on the Mac from
1865 kes Implement new select mechanism for GUI programs.
1866 kes Reorganize initialization of stackedWidgets in bat.
1868 kes Add updated nagios plugin supplied by Christian Masopust.
1870 kes More bat implementation.
1871 kes File migrate bug with Pool Occupancy using mediaid instead
1872 of jobids. Fixes bug #795.
1873 kes Fix orphaned buffers in filed backup and verify due to
1874 crypto buffers not freed during errors. Fixes bug #789.
1875 kes Extend new GUI api code to tree commands.
1876 kes Ensure that tree and dot commands check console ACLs.
1877 kes Permit marking directory with trailing slash.
1878 kes Allow 20 console connections (instead of only 10).
1880 kes Add smartctl call to bacula-sd.conf as an example of getting
1883 kes Modify jobq.c to let simultaneous restore jobs run. This may
1884 cause them to fail if they cannot get a drive.
1885 kes Add Client Connect Wait to Storage daemon to permit users to
1886 modify the time the SD waits for a FD connection.
1888 kes Correct virtual changer check which was backwards. This caused
1889 volumes to be unloaded into slots already occupied.
1891 kes Apply Command ACL filter to JobId list in restore command.
1892 kes Correct typeo in var.c patch.
1894 kes Don't let Bacula prune File or Job records for the current Job.
1895 kes Fix variable substitution pad + inc bug reported (with patch)
1898 kes Correct SQLite log table index as reported by Luca Berra.
1900 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
1902 kes Begin implementing new comm signals for API.
1903 kes Fix a few places in lib/message.c where the open fd may
1905 kes Continue implementing lib/bsock.c (real class). Make jcr,
1906 who, host, and port private. There are new methods to access
1907 them for non-class use. This required touching a number of files.
1909 kes Add LANG=C to autoconf/randpass so it works with languages other
1910 than English. Fixes bug #788.
1912 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
1914 You will not be able to generate Include/Exclude list any more.
1915 It will be fixed soon.
1916 If you want to use this, you can apply
1917 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
1919 kes Restore of sockets created false error messages because Bacula
1920 no longer restores sockets, but the code was still trying to
1921 set the attributes on a non-existent file. Reported by a user.
1922 ebl finish RecyclePool feature
1923 Media will takes Pool.RecyclePool
1924 when moving from Scratch to a Pool or when user will do
1925 update volume=xxx frompool
1926 To use it, add RecyclePool = aPool to your Pool resource
1929 RecyclePool = Scratch
1933 kes Expand new BSOCK class adding signal() and new BNET signals.
1934 kes Begin enhancing the dot commands adding a new API function
1935 that returns more information and will make it easier
1936 to interface to the Director from a program.
1938 kes Make DEVICE fd private. Its new name is m_fd, and can be
1939 obtained with dev->fd() outside the class. This is the
1940 first of many DEVICE members to be made private.
1941 kes Implement Michael Renner's idea on having a virtual disk
1942 changer. I made some minor modifications (e.g. I did not
1943 implement the Virtual Changer directive, but simply set
1944 the Changer Command to an empty string.
1946 kes Implement a BSOCK send() method that writes the whole record
1947 in a single write() request rather than in two.
1948 ebl add update volume=xxx recyclepool=yyyy
1949 volume takes recyclepool from pool when using update volume=xxx from pool
1951 kes Fix encryption deblocking bug, which caused some restored files
1952 to be truncated. This fixes bug #763.
1953 kes Add FD event sequence order prepared by Eric -- for RunScripts.
1954 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
1956 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
1957 ebl Use btime_t instead of uint64_t in media patch.
1959 kes Optimize the use of the database a bit in the Status dir command.
1960 Only open it when needed, ensure that if any previous database
1961 was opened, it is closed.
1963 kes Correct VolCatBytes bug from media patch.
1964 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
1965 in the case of orphaned records.
1966 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
1967 and File records in 300K chunks to be more efficient. This
1968 idea came from Juan Luis Frances (if I remember right).
1969 kes Apply Eric's scratch patch that moves a purged Volume to
1970 the RecyclePool. Question: how is RecyclePool set? what
1971 happens to the ScratchPool?
1972 kes Apply Eric's media patch that collects read/write media
1973 times as well as byte counts. This patch requires a
1974 simultaneous upgrade of the DIR and SD. Note, there
1975 should be some way to turn off timing. I'm not sure
1976 times are in Bacula units.
1977 kes Apply Eric's batch-insert patch.
1979 kes Update projects list.
1981 kes Implement Include/Exclude file lists in FD as dlists using
1982 the new dlistString class. This permits efficiently having
1983 large include/exclude lists and completes project Item 25.
1984 kes Fix dird/ua_cmds.c so that a cancel command checks if the
1985 console is authorized to cancel the job. This fixes bug
1987 kes Modify SD so that the VolCatJobs medium record is updated
1988 at the beginning of a Job rather than the end. This
1989 fixes bug #775 where exceeding MaxVolJobs caused jobs
1991 kes Added a mutex around getting and setting Volume information
1992 so that multiple simultaneous jobs will single thread.
1994 Switch to using Subversion
1995 kes Remove src/pygtk-console/ from configure
1997 kes Delete src/lib/btree.c from win32 build, then add rblist.c
1998 plus the entrypoints.
1999 kes Apply patch supplied that corrects debug print
2000 in canceling jobs for max run time. Supplied as
2001 part of bug #621, which was previously fixed.
2003 kes Test on job_canceled() and sd_msg_thread_done inside
2004 loop starting the message thread to avoid a race condition.
2006 kes Remove rl_catch_signal from console.c as it conflicted
2007 with the header definition. Fixes bug #765.
2008 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
2010 kes Clarify some stored/acquire messages to indicate if the
2011 problem is with read or append.
2013 kes Fix memory leak with storage ids in cats/sql_get.c
2014 kes Terminate watchdog earlier to avoid reference to released
2015 memory -- reported by Jason Austin.
2016 kes Move closing the database from jobq.c to the director daemon
2017 termination routine. This fixes memory leaks for shadow jobs
2018 (i.e. migration jobs).
2019 kes Free up the unique jobid chain items in migrate.c. This fixes
2020 a memory leak problem.
2021 kes Convert some ugly looking for statements to use foreach_alist
2022 in findlib/find.c. This will facilitate converting the structures
2023 to use dlist (for large include/exclude lists).
2024 kes Fix a bug in the btree.c and btree.h routines, then rename them
2025 rblist and add them to be built in src/lib. Include some new
2026 methods written by Rudolf Cejka that make the code more readable
2027 (hides some of the ugly casting).
2028 kes Add set_next() and set_prev() methods which make the code much more
2029 readable. Also add a new dlistString class that facilitates storing
2030 strings in dlists. To be used in the large include/exclude lists.
2031 kes Make some trivial modifications to lib/tree.h that use rblist
2032 rather than dlist for storing the tree links. This was suggested
2033 by Rudolf Cejka. The result of this is that the restore tree now
2034 uses red-black binary trees rather than simple linked lists. This
2035 should give rather dramatic speed improvements for directories
2036 contining large numbers of directories/files (more than 10000).
2038 kes Fix maxruntime bug #621.
2040 ebl Implement the include JobID in spool file name project.
2041 kes Reorder projects file in order determined by Jan 2007 vote.
2042 kes Implement item #12 on project list -- quick release of FD by
2044 kes Fix open of SQLite3 db where user does not have write permission
2045 so that DIR does not crash. Fixes bug #761.
2047 kes Add back missing @ in Win32 Makefile.
2048 kes Change 'Device not configured to autolabel' from INFO
2050 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
2051 which should restart an indefinite # of times.
2052 kes Fix configure --help to print --with-mysql[=DIR]. Same for
2053 other DIR specifications.
2055 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
2056 Fix path quoting in SQLite scripts.
2057 Fix problems with SHGetFolderPath.
2059 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
2061 kes Fix Job restart on error bug that promotes an Inc to a Full
2062 backup. This should fix bug #755.
2063 kes Add qt-console and first cut of code.
2067 kes Fix Bacula->Documentation link on Win32 to point to index.html
2068 instead of bacula.html. Fixed bug #750.
2069 kes Return JobId in db_get_job_record() when JobId==0. This should
2071 kes Do not release source pointers when restarting a failed job.
2073 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
2074 This *should* fix bug #747.
2075 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
2078 kes Modify USTORE constructor to set an empty store_source string,
2079 and don't copy the store_source string in a cancel. Hopefully
2080 this will fix Arno's seg fault, bug #744.
2081 kes Add back code to disable conio in configure. Fixes bug #743.
2082 kes Correct the Options scanner in the FD to correctly handle
2083 SHA1 option, which was eating the next option. Reported by
2085 kes Add code to indicate when the SD is spooling, spool wait, and
2086 despooling as requested by Alan Brown.
2088 Version 2.0.0 released: 4 January 2007