1 Technical notes on version 2.5
6 command separator in console (!$%&'()*+,-/:;<>?[]^`{|}~)
7 examples/database/dbcheck.sql
10 dbdriver in bacula-dir.conf
12 enhancement to wait command: wait mount ...
17 remove reader/writer in FOPTS????
21 ebl Remove warning message in btape when command is empty.
22 kes Fix Win32 build to pull in new BACULA define.
24 kes Change IncludeDir to Exclude Dir Containing.
25 kes Implement code to prohibit ExcludeDirContaining in an
26 Exclude section (same for Plugin and Options). A bit
27 of a kludge with RES_ITEM2 ...
28 ebl Add field to command list to restrict Runscript console
30 ebl Use a separate JCR when running Console command with Runscript.
31 ebl Permit to mark version as Beta in some ouputs
33 kes Add plugin types in jcr.h to reduce need to cast.
34 kes Do better checking of plugin return values.
35 kes Free plugin context after calling pluginFree() as
37 kes Allow plugin to call JobMessage with NULL context.
38 kes Do not add plugin to global list if loadPlugin returns error.
39 kes Rework plugin.h a bit to reduce dependence on Bacula.
41 kes Move generation of bsr file for Virtual Backup to run section
42 so that it is generated just before actually running.
43 Suggested by Graham Keeling.
45 kes Add malloc and free Bacula entry points for plugins. Increment
46 FD plugin interface version. Create a bacula plugin context
47 structure to keep track of whether or not the plugin is disabled.
48 kes Apply FileIndex fix for plugin name stream suggested by James.
49 kes List plugins in FD status report when debug > 0.
51 ebl Add a new VerId variable that is printed in version command.
52 kes Fix migration SQL not to migrate a job that has not terminated.
53 This is a partial fix to bug #1164.
54 kes Sort JobIds returned from db_accurate_get_jobids() to fix Virtual
55 backup start time bug reported by Graham Keeling.
57 ebl Fix possible bug in cancel_job() with job that are not
60 kes Fix bat build for Win32.
62 kes Copy plugin link field into ffpkt.
64 kes Integrate patch from Kjetil Torgrim Homme <kjetilho@linpro.no>
65 It provides FileRegex in bsr files and code to collect regex
66 from the user during restore, an Allow Mixed Priorities feature,
67 and documentation for the above.
68 ebl Remove db berkeley from configure process
69 kes Do dirty check on hostname (Linux only) and if not resolvable
70 use localhost as default.
71 kes Increase vtape max block to 20GB.
73 kes Refactor restore code to create a close_previous_stream(). This
74 This may destabilize the source.
75 kes Implement planned startRestoreFile() plugin call.
76 ebl Remove missing Loaded information from status slots storage command.
77 ebl Fix Console command problem that cancels the job
78 kes Add more plugin restore debug code.
80 kes Fix plugin_bwrite - plugin-blseek mixup pointed out by James.
81 kes Rewrite plugin restore interface a bit to correspond to how Bacula
82 creates and writes to the restored file.
83 kes Add some DebugMessage() calls to the bpipe-fd.c program.
85 kes Apply Marco van Wieringen's set of patches, cleans up Migration/Copy
86 Implement 'Pool Uncopied Jobs', allow Solaris Compiler to build
87 Bat; allow add and delete in place of mark and unmark.
88 kes Another attempt to fix the endRestoreFile plugin bug noted below.
90 kes Apply dbi driver patch from Joao.
91 kes Correct a bug in passing the context to the endRestoreFile() plugin command.
92 Bastien Friedrich reported the bug.
93 kes Create plugin instance only when FD job starts.
94 kes Add new FD plugin event: bEventCancelCommand when
95 a cancel command is issued to the FD.
97 kes Add cmd_plugin flag to jcr so we can globally know if a
98 command plugin is running.
99 kes If command plugin running, do not attempt (for the moment)
100 to get Win32 extended attributes.
101 kes Ensure that proper Win32 flags are set in bfile packet
102 if plugin_bopen() works on Win32.
103 kes Remove generated src/plugins/fd/Makefile
105 kes Implement build and install of bpipe-fd.so plugin.
106 kes Rework the interface that passes packets to the plugin
107 so that the packet is started and ended by the packet size.
108 This allows the driver to do a sanity check.
110 kes Rework the pluginIO Bacula internal code to enable
111 proper handling of Win32 error codes from GetLastError.
112 kes Apply Joao's patch to regress startover_libdbi.
114 ebl Add -B option to dbcheck to get catalog information
115 kes Fix Win32 build to include new library function.
116 kes Remove some old reader/writer code.
117 kes Implement ./configure --with-plugindir=xxx
118 ebl Fix the mysql bug in the new accurate code
119 kes Improve plugin debug. Create plugin test.
120 kes Set main thread specific data to INVALID because it
121 has no jcr. This allows debug output to work correctly.
122 kes Add src/plugins/fd/Makefile to ./configure process.
123 kes Make first cut attempt to correct SQL that computes the current
124 Pool usage. This is to fix bug #1159.
125 kes Do a bunch of plugin cleanups for Win32 and more careful checking
126 of PluginDirectory and whether or not a plugin was found.
128 kes This code should fix the race condition that leads to a Director
129 crash at job end time when the job list is updated. This was reported
131 kes Add more plugin documentation and fix include of config.h for
132 Win32 build (I hope).
134 ebl Revert to htable instead of rblist
135 ebl Cleanup accurate code (remove tcdbm parts) and use red/black
136 tree instead of htable.
137 ebl Use a dedicate DB link to compute and send the accurate list
140 kes Fix compile errors in filed/fd_plugin.c.
142 kes Remove all double quotes from SQLite creating script and
143 replace by single quotes as suggested by John Huttley.
145 kes Apply dbcheck patch from Yuri Timofeev <tim4dev@gmail.com>.
146 It significantly improves the performance of dbcheck for
148 kes Fix bad debug code call in src/filed/accurate.c
150 kes Change two Jmsgs in accurate to Dmsg to reduce unnecessary
151 output. Perhaps we really need to implement M_SAVED.
153 kes Fix bug #1156 FD crash during processing of Accurate data.
154 kes Tweaks to htable code to improved debugging and make names
155 a bit more meaningful.
157 ebl Remove time_t from update_stats()
159 kes Modify the license of the example plugin program to allow
160 it to be used by anyone for making a Bacula plugin.
161 kes Make apply_rp_codes() in bpipe-fd.c be static.
163 kes Remove Encryption and Accurate lines in vbackup output -- not used.
164 kes Fix subtle bug in vbackup by not changing DEV_RECORD packet.
165 kes Add host name to items printed during dump.
166 kes Make Check File Changes default on.
168 kes Set the default FD timeout to 3 minutes (previously 30).
169 kes Apply Bastian Friedrich's weird spelling correction patch.
171 kes Always print Verify hash differences. Rename variable to make the
172 code slightly more readable.
174 kes Correct tests for MaxFullInterval as reported by
175 Ulrich Leodolter <ulrich.leodolter@obvsg.at>..
176 kes Fix MaxDiffInterval code as well.
177 kes Enable Win32 plugin load code in lib.
178 kes Make Verify code that computes disk checksums use the same
179 algorithm as backup when dealing with sparse files.
180 kes Attempt to run VSS on any systems newer than Vista -- should
181 make it work on Windows Server 2008.
182 ebl Change the new statistic implementation. Remove the UseStatistic
183 directive and add a 'update stats [days=...]' command. You can
184 now decide when copy job records from Job table to JobStat.
185 Statistics are much more accurate with this.
187 kes Fix SQL case problem that may cause the failure of DiskToCatalog
189 kes First cut adding SD plugins.
191 kes Add Slot if it is non-zero to writing bsr file after a
193 kes Change a number of bnet_fsend() into class method calls.
194 kes Begin audit of diff of 2.4 branch to trunk code.
196 ebl Fix the mysql creation script that double-created an
197 index of the same field on the Media table.
198 Add an index to on VolumeName to the Media table for mysql.
200 kes Another try at fixing Vbackup. It looks much better this time.
201 Disable file index sanity check in FD with value stored in
202 attributes record because with Vbackup the File Index gets
203 changed, but not the attributes record.
204 Enhance some debug code.
205 Fix handling of re-indexing records that are copied in Vbackup.
207 kes Made level_to_str() know about Virtual backup.
208 kes Set correct Virtual backup write pool.
209 kes Fix compile warning in new dbcheck port code.
210 kes Fix migration code broken by previous virtual backup fix.
212 kes Fix problem of Virtual backup not writing a sequential FileIndex.
213 kes Reset Virtual backup time/date to the value from the last backup.
214 kes Ensure that storage name is passed to SD on read.
215 kes Correct a problem with Level and Virtual backup, rework how
216 bsrs are printed in debug to use standard routine.
217 kes Apply patch from Chris in bug #1133 that provides alternate db port
219 ebl Remove catalog dependency from bcopy tool.
220 ebl Modify catalog scripts to have an easier packaging integration,
221 using default variables.
222 Make difference between SQLite3 and SQLite in db_get_type()
224 kes Apply most of changes in a patch from:
225 Michael Stapelberg <michael+bacula@stapelberg.de>
226 that allow the Bacula FD to compile on IRIX 6.5.
228 kes Apply patch from Bastian Friedrich that accepts a yes on a
229 delete volume command line.
230 kes Attempt to fix bug #1128 InChanger flag cleared during Migration
231 job when reading from one autochanger and writing to another.
232 kes Minor tweaks (copyright dates convert to use method instead of bnet).
234 kes Fix NULL Volume error when reading (or Migration or VBackup) must switch
235 drives when no tape is mounted.
237 kes Add additional info to some SD messages.
238 kes Add fix supplied by Martin Simmons for turning off EOL character
239 in new console multi-command code.
241 kes Fix a Verify InitCatalog problem where in certain cases
242 a garbage filename may be entered in the verification database. This
245 kes Add VSS 64 bit dll entry point in src/win32/filed/vss_generic.cpp
246 sent in by Riyas Yoosuf.
248 kes Fix seg fault in Dir during estimate command with no level value
249 given. This fixes bug #1140.
251 kes Add message to migration job when the target job is already migrated.
252 This closes bug #1129.
255 kes Raise some restore debug levels.
256 kes Replace off_t by boffset_t where ever I found it.
258 kes Define a machine dependent ioctl request type for use with
261 kes When a migration job actually runs, re-check the Job record
262 and skip if the job is already migrated. This should
263 significantly reduce the problems with bug #1129.
265 kes Set MALLOC_CHECK_=0 in environment before starting Bacula to
266 turn off glibc checks that prevent getting good dumps.
267 kes Implement console 'wait mount' command. Doesn't yet work.
268 kes Implement timeout=nn on console 'wait mount timeout=nn' command.
269 kes Break the do_swapping into do_unload, do_swapping, and
270 do_load. It is much more logical that way.
271 kes Implement a set_dcr_from_vol subroutine in acquire.c for
272 reading volumes. This allows the dcr to be refreshed after being
273 zapped when the wrong volume is mounted.
274 This should fix bug #1126 -- During multiple tape restore, bacula
275 does not ask for physical tape change, but rereads same tape
277 kes Apply patch submitted for bug #1107 with a small modification.
278 This fixes a bug where bcopy copied too many records.
279 kes Make some tweaks to bsmtp based on patch submitted in bug #1124.
280 This fixes bug #1124.
281 kes Make the default bat restore Pool be Any. This fixes bug #1118.
283 kes Remove debug statement that crashes the SD at the end of
284 a tape during restore. Fixes bug #1125.
286 kes Implement Win32 bat changes made to Branch-2.4
288 kes Tweak separator command in console to start disabled and
289 allow defining no separator character. Also make code a
290 bit more fault tolerant.
291 kes Make btraceback write the traceback to the working directory
292 before attempting to mail it.
293 kes Add a RFC to Projects.
295 kes Attempt to implement a kludge to make Qt work with bat
297 kes Setup rstorage correctly. Virtual backups are working.
299 kes Move setting JobLevel and JobType into a method, which should
300 allow completing Virtual Backups.
301 kes Fix verify jobs to work again.
303 kes Virtual Backup tweaks -- it is close to working.
305 kes Ensure that SD tried to mount a volume not in an autochanger
306 at least once before asking for operator intervention.
307 kes Make SD aware of Virtual Backup jobs.
308 kes Add VirtualFull for bat.
309 kes Changes to get read storage correct for Virtual Backup.
311 kes Remove old code from label.c
312 kes Split display_display_info() out of write_bsr_file()
313 kes do_vbackup_init() working -- i.e. bootstrap file built.
314 kes Change Bacula trademark owner from John Walker to Kern Sibbald
315 kes First non-working cut of vbackup
316 kes Correct FD heartbeat code to use volatile variable accessed by
318 kes Zero thread id with memset if on Win32 in case it is a struct.
319 kes If cannot create JobMedia record, continue to try to write eof
320 and clean up in block.c
322 kes Add code to interface OpenSSL to new Win32 pthreads code which
323 used a structure for thread_t.
325 ebl tweak bat for win32 compilation
327 ebl Remove tokyo cabinet from the source
328 ebl Update configure/autoconf to support berkeley DB
329 ebl Add a sort to db_get_file_list() to improve bsr construction time.
331 kes Add a mtx-changer.conf file that is not overwritten during
332 an upgrade. It fully configures the mtx-changer script.
333 kes Clear in-use bit on vol when unused while swapping.
335 kes Remove sleep at end of ./bacula
336 kes Clear hash packet for hardlinked files correctly. This corrects
337 a long standing bug where hardlinked files selected individually
338 would occasionally not be restored.
340 kes Apply Eric's patch to ensure that autoprune does not return
341 a Volume not in the autochanger unless requested to do so.
342 kes Correct bat restore display of multiple drives. This fixes
344 kes Do find_a_volume() each time an unload is done. This
345 fixes the failure of maxvol2-test.
347 kes Add some SD debug code.
348 kes Do find_a_volume() each time an unload is done.
349 kes Apply Joao's DBI patch that adds easier configuration of DBI drivers,
350 and adds --with-db-port to ./configure.
351 kes Use Qmsg() in job.c watchdog callback.
353 kes Release main control rwlock if ABORTing.
354 kes Make watchdog connect timeout queue messages rather than sending
355 directly to avoid lock conflicts with the real thread.
356 kes Add const char in dbd.c to avoid compiler warnings.
357 kes Fix python compiler string warning. Note, IMO the GNU C++
358 compiler guys have made a *very* bad change to their compiler.
359 They now force all strings to be 'const' unless you explicitly
360 cast them, which is extremely ugly and ruins nice code as well
361 as creates a lot of useless work.
363 kes Fix mtx-changer to detect both versions of Ubuntu (Debian)
364 mt. This fixes bug #1116.
365 kes Add const in python files to reduce compiler warnings.
366 This may have to be backed out because of later compiler
368 kes Fix failure of 2drive-concurrent-test. Always read label;
369 clear_unload() only after drive is defined in acquire_for_read().
371 kes Generally clean up the manual tape loading code. The main
372 conceptual change is that when a volume is marked to be unloaded,
373 its volume name is retained, and it is only marked as unloaded
374 when either the autoloader says it is unloaded or another tape
375 is read on that drive.
377 kes Add debug code and refactor subroutine in stored/mount.c
378 kes Fix format problem in bscan output reported in bug #1105.
379 ebl Fix get_next_volume_for_append logic with autochanger
380 - use pruned volumes if found
381 - don't reset the inchanger flag after getting a recycled volume
383 Fix recycle_oldest_purged_volume to take InChanger flag in account
385 ebl Add mmap/unmmap implementation for tokyodbm under win32
387 kes Make first step toward eliminating globals from config
388 scanning. Also should be a workaround for FORTIFY_SOURCE
389 GNU C bug -- fixes bug #1042.
391 kes Apply duplicate job tests to restarted jobs.
392 kes Copy more data when restarting a job so that run
393 overrides are kept. This should fix bug #1094.
395 kes More word alignment cleanup.
396 kes Fix bug where SD did not ask operator if the device could not
397 be opened. Reported by Eric.
399 kes Add dbuser to DIR conf file (replaces user).
400 kes Add --with-db-password to ./configure
401 kes Fix regress to handle db_password.
402 ebl Add new 'status storage slots' that list autochanger
404 ebl Update vtape driver to compile only under Linux.
405 ebl Fix a bug when restoring with a wrong mediatype.
407 kes Eliminate ints from conf files and structures to avoid
408 word alignment problems
410 kes Fix bug reported by Scott Barninger where the bacula script
411 refers to scripts in the wrong directory. Needed to meet the
412 requirements of recent FHS location changes.
413 ebl Disable vtape for FreeBSD.
415 ebl Modify disk-changer to check if slot contains something before
418 ebl Fix vtape on win32 and debian.
419 ebl Fix autoselect patch (cause segfault).
421 ebl Fix autoselect option broken for a while. Fix #1089. Need some
422 work with StorageId to be able to use a particular drive in a
425 ebl Rename vtape to vtape.
426 ebl Update vtape driver.
428 ebl Modify vtape driver to avoid sparse file.
429 kes Add make clean of qt-source directory during ./configure
430 kes Store last block number written to tape in DEVICE and
431 use it for testing for correct last block on EOT.
433 Release Version 2.4.0:
437 kes Make sure to clear JS_WaitMedia when operator mounts a Volume.
438 This fixes bug #1095.
440 kes Add create_postgresql_database.sql to Win32 installer. Should
441 fix problem reported by Juilio Monteiro.
442 kes Get correct slot when auto unloading a device. This fixes bug
445 kes Fix multiple media restore.
446 kes Make DEVICE Slot private and access it via a method.
447 Allows better control over when it is set and cleared.
448 kes Fix possible seg fault if SQL error.
450 kes Add Martin's fixes to argument scanning for the estimate
451 command. This fixes bug #1093.
452 kes Add debug code to SD.
453 kes Fix renaming a Volume, which used the wrong Volume name.
455 kes If operator has rewind tape, print warning, release tape and
456 try once more. If tape is positioned somewhere, something went
457 wrong, so mark the tape in error and try once more. Previously
458 this error was fatal, now it produces an error message.
459 kes Ensure correct volume name displayed during restore
460 kes Ensure that Volume is mounted for restore.
462 kes Fix a few more Coverity reported problems.
464 kes Apply Allan Black's status dir job count patch.
465 ebl Add information about IMPORT/EXPORT slots in mtx-script.
466 kes Enhance a couple of SD debug messages.
467 kes Tweak unload flag setting and ensure it is set during swap.
469 ebl Fix #1091 about bad output in estimate command.
471 kes Modify autochanger locking to attempt to avoid race
473 kes Make sure device not busy before doing label command.
474 kes Display open() errors except when polling. Previously too
475 many were suppressed. This should fix bug #1070.
476 kes Fix Win32 reparse points. Bacula will not recurse into any
477 reparse point directory, including mount points, unless the
478 directory is explicitly mentioned at the top level (same as
479 with Unix). A file that is linked to another file will be
480 backed up -- much as Unix does for hardlinked files.
481 This fixes bug #1041.
483 kes Remove double quotes from ChangeLog and ReleaseNotes
484 kes Remove StorageId test when pruning and recycling (Eric's changes).
485 kes Remove old form of locking when getting volumes -- causes deadlock.
486 kes Change bat dirstat layoutWidget to dirstatlayoutWidget to make
487 the name unique and to eliminate compile time error.
488 kes Add accurate.o to Win32 FD Makefile
490 kes Fix cats dll build on Win32 after db_update_job_end_record
491 calling sequence change.
492 ebl Switch to tokyo dbm instead of htable in accurate code
493 ebl Include tokyo dbm to bacula source tree
495 kes Fix buffer overruns detected by Coverity.
497 kes Tweak joblog display.
499 kes Implement --without-qwt
500 kes Fix layout of restore tree dialog
501 kes Add configure bat QWT libraries, so that bat can be built
502 with or without the QWT libaries.
504 ebl Add dummy tape driver for regression tests.
505 kes Make sure we unload the right slot when swapping.
507 kes Add debug times, reduce size of two-pool-changer test
509 ebl Tweak autoconf scripts for vtape
511 kes Improve SD reserve debug code.
512 kes Testing an improvement to free up volumes no longer in use.
514 kes Rework SD acquire for read to handle autochanger Volume
516 kes Implement regression that explicitly tests swapping a Volume
517 from one drive to another.
518 kes Enhance disk-changer to detect most error conditions.
519 kes Fix SD code so that it properly swaps a Volume between drives.
520 This fixes bug #1083.
522 kes Apply libdbi patch from Joao Freitas for regress and for
523 Bacula trunk. Regress now works with libdbi. Nice.
524 kes Apply .nobackup patch from bug #1077 submitted by
526 kes Apply Bastian Friedrich's patch that adds %p to edit the pool
527 name into jobs cloned via the run directive.
529 kes Prevent a Volume that is being swapped from being freed from
530 the volume list. This will most likely fix, at least partially,
532 kes Fix strippath so that it does not get a buffer overrun and crash FD.
533 This fixes bug #1078.
534 kes Remove 50 millisec wait in SD that broke debugger.
535 ebl Add MaxRunSchedTime option that specifies the maximum allowed time
536 that a job may run, counted from when the job was scheduled.
537 ebl Fix MaxWaitTime option that specifies the maximum allowed time that
538 a job may block waiting for a resource, counted from when the job starts
539 ebl Rename (add) Max(Incr|Diff|Full)WaitTime to Max(Incr|Diff|Full)RunTime
540 kes Apply patch from bug #1076 by Tullio Andreatta <t.andreatta@troppoavanti.it>
541 that implements multiple commands per line in the console when using
542 readline. Modify the default to use a semicolon as the command separator.
544 ebl Fix SQL query in migration code.
545 ebl Make accurate mode with hash disk pass regression tests
547 ebl Implement first cut of accurate backup with hash disk.
549 kes Force unload of volume when wrong volume mounted in SD.
551 kes Fix bat seg fault at termination.
552 kes Add Bacula generated version to bat about box.
555 kes Experiment with allowing multiple read jobs.
556 kes Move final volume swapping code to DCR method and
557 call it from acquire_for_read().
558 kes When wrong volume is mounted during read, unload_autochanger.
560 kes Integrate the libdbi changes from Joao Henrique Freitas
562 kes Stop searching for Volumes in SD askdir if DIR returns the
563 same volume name twice in a row.
564 kes Close bat console windows first to eliminate error message
567 kes Tweak the swap Volume from one drive to another code so that
568 it now seems to work.
569 kes Resolve several problems with recycling that broke the new
570 code (these problems are in 2.2.9 as well).
571 kes Remove the volume lock when calling the sysop code.
572 kes Don't mark a reserved volume with no writers as unused otherwise
575 kes Rework class structures for VOLRES, DCR, and DEVICE to make
576 the method names a bit more logical, and for more logically
577 handling the responsibilities.
579 kes Remove redundant code in terminating the scheduler that just
580 causes a seg fault in many cases.
581 kes Cleanup releasing a volume and make it a DCR method.
582 kes Improve algorithm for detecting pre-reserved volume and
585 kes Tweak volume swapping code so it works.
586 kes Correct name overloading in mount.c
587 kes Replace released flag in VOLRES with reserved and add access
588 methods for the VOLRES class.
589 kes Prevent volume from being released while being swapped.
590 kes Apply Bastian Friedrich's edit codes patch for the bpipe-fd
591 plugin that add %w (where) and %r (replace flag) editing to
593 kes Apply Bastial Friedrich's edit pool=%p patch for run clone
595 kes Refactor parts of stored/mount.c
597 ebl Add sanity checks for VolWriteTime and VolReadTime
598 ebl Take care of bad clock changes while computing VolWriteTime
599 and VolReadTime. This should fix or limit #1066
600 kes Correct error string numbers in dird/catreq.c
601 kes Restructure reserving, acquiring, and mounting volumes. Calls to
602 autochanger are deferred for mount.c -- simplifes the code.
604 kes Do not prune any running job. It just fails the job.
605 kes Lock the volumes when changing dev->reserved_device and marking
606 the volume unused otherwise the device can get reserved by
607 another job before the volume is released, thus blocking it.
609 kes Correctly detect Ubuntu systems, and add ubuntu platform directory.
610 kes Fix bug #1063, reuse of freed ptr in list nextvol.
611 kes Release regex compile buffer in filed/job.c
612 kes Add proper type of const char in sql_create.c
613 kes Turn off debug in daemon termination routines
614 kes Move free_volume_list() before devices are freed in stored.c
615 kes Fix reference to uninitalized stack variables in bregex.c.
616 This should correct bug #1067.
618 kes Fix possible seg fault in SD when freeing a volume entry.
620 kes Implement unload_dev() before swap device.
621 ebl Add statistics prunning with option and menu
622 kes Separate unload_dev() from unload_other_device() in autochanger.c
624 kes Apply patch from bug #1069 that corrects spurious error messages
625 when ACLs enabled on SGI but no ACL exists.
626 ebl Fix small segfault in bacula-sd when debug level is 500
627 kes Modify run_program() and run_program_full_output() to use
628 call by reference for the results string. This corrects a long
629 standing problem where the address of the string may be changed
630 in the subroutine but not in the calling program.
632 kes Re-enable code to remember last volume mounted on a non-tape
634 kes Add patch supplied in bug #1068 that fixes a SD crash when using
635 a Virtual autochanger.
636 kes Generate correct JobMedia records during spooling/despooling when
637 running concurrent jobs. Thanks to Tom Ivar Helbekkmo
638 <tih@hamartun.priv.no> for excellent analysis and testing.
640 kes Tweak hash algorithm for htable using Martin Simmons idea
641 for doing a circular shift.
642 kes Remember what volume is in VTLs (previously turned off for
644 kes Analysis of JobMedia records by Tom Ivar Helbekkmo <tih@hamartun.priv.no>
645 pointed out some problems in creating JobMedia records during
646 spooling with concurrent jobs. Fix the problem by updating the
647 start file position before despooling and generate a jobmedia
648 record at the end of despooling.
650 kes Fix handling of JobMedia records during spooling and when a
651 Volume is changed without actually writing data to the Volume.
653 kes Rework certain SD locking based on gdb tracebacks of deadlocks
654 sent by Eric. This code now uses only the volume_lock() rather
655 than the reservations lock when at EOM and acquiring a new
657 kes Ensure only one exit point in several subroutines.
659 kes Implement bsock code to permit locking. Use the new code in Verify
660 in the FD to prevent the heartbeat thread from disrupting the Verify
661 data sent to the Dir.
662 kes Modify SD locking to eliminate locking the reservations system from
663 outside the system. Use the volume lock when getting media data
664 and reserving a new volume at end of media.
665 kes Add Eric's volume_unused() fix to stored.c so that Volumes found
666 when SD starts are not locked into place.
668 kes Fix error compiling runscript code on 64 bit machines.
669 kes Tweak Win32 mount point code.
670 kes Fix a couple of bugs in the accurate code (bad sscanf, buffer not
671 cleared giving bad file estimate).
672 kes Implement BIG_MALLOC in htable code. Runs 2.5 times faster for
675 kes Keep Schedule run lists in order as suggested by
678 kes Implement autostart scripts for Debian.
679 ebl Implement upgrade catalog scripts.
681 ebl Apply jobstat patch for long term statistics. Have to implement
682 purge stats command and upgrade scripts.
683 kes Fix mtx-changer.in for broken Debian mt program.
685 kes Fix large number of JobMedia records reported by Eric Bollengier.
687 kes Apply doc fix from bug #1062.
688 kes Resolve crash and improper restore wx-console Win32 restore
689 GUI. Fixes bug #1065.
690 kes Update Win32 wxWidgets to latest version.
691 kes Attempt to do correct handling of Win32 mount points. Should
693 kes Fix Win32 FD backup/restore memory leak due to improper termination
694 of BackupRead/Write. This fixes bug# 1038.
696 ebl Reduce memory usage for accurate backup, working only with ctime
697 and mtime. (not all Lstat field)
698 About 40MB for my Linux system (400.000 files)
700 kes Add dcr->reserved_volume flag that allows us to release a volume
701 even if it is not vol->released. This allows maxvol2 to work when
702 Volumes expire and we are already writing to the device (i.e. a
703 volume is pulled out from under us by another job terminating after
704 we reserve the drive).
706 ebl Permit multiple command/console per runscript definition.
707 RunScript { command = /bin/true ; command = /bin/false ... }
708 ebl Add RunsWhen = AfterVSS to runscript. You can execute a command
709 (restart an application) just after the VSS snapshot on windows.
710 kes Don't zap dcr values during release_volume() as they might
711 have the next Volume to be mounted.
712 kes Fix AIX prototype.
714 kes Second cut of drive switching during backup.
717 kes Update Win32 version of wxWidgets to most recent version.
718 kes Tweak Copy job details.
719 kes Rework dir_find_next_appendable_volume to make a bit more effort
720 to find a suitable volume before giving up.
722 kes Make ask_sysop_to_create... to return if waken from wait.
723 This helps get out of blocked conditions.
724 kes Experimental implementation of switch_device in reservations.
725 kes Implement FD version to allow easier protocol changes.
726 kes Add Plugin Options string -- not yet passed to FD.
727 kes Implement PluginOptions ACL.
729 kes Attempt to correct problems with restores with autochangers and
730 use counts going negative
731 kes Rework SD status command and implement API for bat. Implements
732 header, runing waitreservation, devices, volumes, spooling,
733 and terminated status keywords.
734 .status storage=xxx <keyword>
735 kes Clarify TLS error message by adding double quotes around name.
736 kes Simplify SD/FD status code by putting api flag in STATUS_PKT
737 kes Pass jcr to tls routines so debug messages can be handled better.
738 kes Rework jobq resource allocation code, and possibly fix a bug
739 that caused reference counts to get out of sync.
741 kes Rename fd/dir plugin to use Bacula standard underscore.
742 kes Plugin work -- bring dir up to fd level.
743 kes Start implementation of VTL code
744 kes Fix Win32 build after adding new cats subroutine.
746 kes First cut at Duplicate Job implementation.
748 kes Fix bugs in MaxFullInterval and Implement MaxDiffInterval.
749 kes Start PluginOptions string, and refactor a bit of ua_run.c
750 ebl Apply Allan patch that permit to reset recyclepool.
752 kes Test patch -- possible fix or improvement for bug #1053
753 kes Refactor FD and SD status commands to permit new API code in
754 SD, and to fix Win32 build.
755 kes Win32 build is now working.
757 kes Implement 'MaxFullInterval' and start 'MaxDiffInterval' based on
758 some ideas in patch from Scott Bailey.
759 kes Begin implementation of duplicate Job control.
760 kes Fix some of Win32 build after recent additions.
761 kes Apply patch from Frank Kardel that implements 'honor no dump flag',
762 which causes the FD to detect whether or not the OS has the
763 honor no dump bit (*BSD systems), and if so, to skip backing up
764 any file with this bit set. The feature is enabled by setting
765 'honor no dump flag = yes' in the Options section of a FileSet.
767 kes Correct po warning message with datarootdir
768 kes Implement more code in dird.c to put configuration parsing in
769 a class rather than use globals.
770 kes Restructure SD status command for implementation of bat API
773 kes Suppress incorrect 'Will not descend from x into y' messages.
774 kes Eliminate FORTIFY_CODE=2 bug, and make first cut at removing
775 daemon globals used by parser.
776 kes Apply Joao's patch to separate DB_TYPE and DB_PROG in configure.
778 kes Fix free of plugin_list when none exists.
780 ebl Apply accurate project patch.
782 ebl Fix a segfault when using strip_path option. (Use of pm_strcpy
783 on non-mempool object)
784 kes First cut of converting FD .status to work with bat API.
786 .status client=XXX header
787 .status client=XXX running
788 .status client=XXX terminated
789 kes Implement first cut of Copy Job.
790 kes Implement Catalog in Pool resource. It overrides catalog specified
791 in the Client resource.
793 kes Apply patch (with some difficulties) from Joao Henrique Freitas
794 <joaohf@gmail.com>, which adds support for libdbi as a Bacula
796 kes Add patch from Martin Schmid scm@apsag.com that checks to see if
797 ftruncate() actually works. In the case of some (cheap) NAS devices,
798 it does not, and so recycling NAS Volumes does not work. The code
799 simply unlink()s the file, then recreates it. This fixes bug #1011.
801 kes First incomplete cut of big malloc blocks for htable.
802 kes Tweak plugin code.
804 kes Plugin debug code + tweak a couple bat dialog layouts
806 kes Fix creating first JobMedia record during Migration to include
807 proper index. This caused slow restores of migrated jobs.
808 kes Temp fix to plugin name file_index.
809 kes Bacula backed up and restored a MySQL database.
811 kes Implement plugin restore.
812 kes Implement parsing of db_driver to give db_type index.
814 kes First cut of plugin restore code.
815 kes Fix bug #1047, which had a heap overrun when stripping certain paths,
816 and do not strip paths on symbolic links.
817 kes Set catalog backup database and user name from values specified on
818 the ./configure line.
819 ebl Fix #1031 about wrong pool source information in job report.
822 kes Remove a redundant jcr argument to find_files, match_files, and
824 kes Implement '.status dir header|scheduled|running|terminated' that
825 prints the requested status section. With the exception of the
826 header, the other reports have fields separated by tabs (\t).
828 kes Apply patch from Peter Much <pmc@citylink.dinoex.sub.org> that fixes
829 a resource embedded run command to find a since time if no explicit
830 since time was supplied on the command line.
831 kes Apply state-file.patch sent by Allan Black <Allan.Black@btconnect.com>
832 that updates the state file at job termination time in addition to
833 when the daemon terminates.
835 kes First version where a plugin did a backup.
836 bpipe-fd.so created a backup file, wrote a test
837 string to it, and Bacua could restore this fabricated file.
839 kes Implement DB Driver = string for the DBI driver.
840 kes Remove all old bdb_xxx.c code. Add dummy routines to bdb.c
841 kes First cut of code for loading Win32 plugin dlls. Implement
842 dlopen, dlsym, dlclose, and dlerror in src/win32/compat/compat.cpp
843 and implement a dlfcn.h file based on opengroup's definitions of
846 kes First cut plugin directives.
848 kes Apply patch from bug #1049 to prevent stripping the path on a
850 kes Attempt to fix bug #1047 where stripping a path corrupts the
851 heap. Waiting for feedback.
852 kes Correct the Mount message not to suggest labeling a new tape
853 when doing a restore. Submitted by email by John Stoffel.
854 kes Attempt to work around gcc FORTIFY_SOURCE bug that crashes the
855 FD by using casting. Reported in bug #1042.
857 kes A bit of crypto cleanup. More later.
859 Release Version 2.2.8
861 kes Apply patch from Martin to correct bug #1040, bscan sets existing
863 kes Fixed important spelling error in doc -- bug #1045.
865 ebl Fix bextract to be able to extract non-portable Win32 data to
867 kes Move initialization of read/write res lock earlier in the code.
868 This fixes the crash with a null conf file. This fixes bug
870 kes Redefine CURES in lib/parse_conf to be URES and move it all
871 into lib/parse_conf.c -- this responds to bug #1042, but does
872 not fix it. The fix is not to compile with FORTIFY_SOURCE.
873 kes Backport to 2.2.8 fix de-referencing a NULL pointer in the scanner from
874 the trunk SVN. I don't think this was reported as a bug.
876 ebl Fix a bug during tape initialization with MTSETDRVBUFFER.
878 kes Fix Win32 build with new .def files and DLL_IMP_EXP ...
880 kes Add DataDespooling and DataCommitting status (committing is
881 the last despooling).
882 kes Finish implementation of new reservations code noted below.
884 kes Fix bsnprintf for float point numbers. I broke recently when
885 parameterizing some variables. This fixes bug #1036.
886 kes Undo recent reservations changes ... will apply them later
887 when they work better.
889 ebl Fixes #1034 which cause mysql to hang the connection after 8h
890 ebl Change default statistics target of filename.name and path.path
891 fields for PostgreSQL. This speeds lookup by indexes. Thanks
893 kes A few more tweaks to new reservation code. Make sure to clear
894 vol released flag when retaking volume. When reading label and
895 label is bad mark volume unused. When recycling, mark volume
896 unused so it can be renamed.
898 kes Fix reserve_volume() so it doesn't release a volume in use
899 (i.e. a volume entry not marked released). This should be
900 the last part needed to fix bug #1018.
902 kes Move Heartbeat documentation from Job to Director resource.
903 This fixes bug #1033.
905 kes Fix existing switch drive SD code to call autochanger to release
906 any old volume. This must be done to keep the autochanger from
907 releasing subsequently newly reserved volumes in doing a close().
908 This should fix bug #1018.
909 kes Fail if attempting to get console input in batch mode. This
910 should help fail RunScript console commands that are incomplete.
911 kes First cut implementing switch_drive() in SD (not actually called).
913 kes Implement first cut running console commands in a RunScript.
915 ebl Fixes bug #1028 where 'Selection Type' option was not usable
917 ebl Fixes bug #897 and bug #1005 where bacula doesn't display runscript
920 Release Version 2.2.7
922 kes Add new free_tls() entry point so that Win32 builds.
923 kes Fix compile warning in src/lib/util.c
924 kes Fix entry point for edit_job_codes() so that Win32 builds.
925 kes Fix seg fault Frank Sweetser reports in regression testing
926 on his systems. The problem was that the original author of
927 bsnprintf.c did not take into account the side effects of
928 using ++x in the argument to a #define.
929 kes Make SD protocol backward compatible with version 2.2.x.
931 ebl Fixes bug #1015 where bacula failed to restore acl to a socket
932 because Bacula no longer restores sockets.
933 ebl Always use ignorecase fileset option on win32 FD.
935 kes Apply patch from Michael Stapelberg <michael@stapelberg.de>
936 that implements double quoting include names in conf files,
937 and also allows piping input by having the first character
938 be a vertical bar (|).
939 kes Apply patch from Bastian Friedrich <bastian.friedrich@collax.com>
940 that implement %f in RunScripts to pass the FileSet name.
941 kes Skip leading | when lex input comes from a pipe as suggested
942 by Michael Stapelberg <michael@stapelberg.de>.
944 kes Apply patch for bsmtp Win32 daylight savings time fix supplied by
945 Nerijus Baliunas <nerijus@users.sourceforge.net>
947 kes Implement Plugin Directory and plugin events.
949 kes Implement a security enhancement: TLS authentication but no
950 encryption. Enabled by setting 'TLS Authentication = yes'.
951 Note when this is on, TLS encryption is turned OFF!
953 kes This patch corrects a problem where the maximum concurrent storage
954 jobs counter gets out of sync during restore jobs causing jobs to
955 'wait on max Storage jobs'. This patch fixes bug #1009.
957 kes This patch fixes bcopy so that it produces correct Volumes.
959 kes This patch eliminates spurious output to the console during a VerifyVolume
960 job that contains encrypted data. It fixes bug #1024.
962 kes This patch prevents the 'status dir' command from trying to use a scratch
963 volume and possibly moving it from one pool to another. This patch fixes
966 kes Add new include to postgresql.c suggested by Marc Cousins so
967 that it compiles correctly with pgre version 8.3.
969 kes Fix --archivedir addition to configure. Replace it with
970 --with-archivedir in configure.in This fixes the regression
972 kes This patch fixes bug #1012 where the job is canceled because
973 of Max Run Time exceeded when the job has not yet started.
975 ebl Apply Richard Mortimer patch that fixes #1016 when there are more than
976 one 'part' to write. Instead of each part being stored on disk,
977 written to DVD, then deleted from disk, all parts are written to disk,
978 and only the last is written and deleted from disk.
979 kes This patch fixes the status command to include the formating string for
980 JS_AttrInsterting. It fixes bug #1021.
981 kes This patch should fix the Mac OS X build problem on the latest
982 Darwin, where sys/types.h was not included correctly (apparently
983 due to a change in the Mac headers). The solution was to explicitly
984 ensure that it is defined for the ./configure.
985 This patch also has a rebuild of configure that includes the Debian
986 qt4 patch to check for qmake-qt4. This patch fixes bug #1020.
987 kes This patch should ensure that queued messages to the console are
988 displayed as soon as possible. It should fix bug 1007, but has been
989 reported not to work.
991 kes This patch fixes the infinite loop when trying to increase the
992 maximum number of volumes in a Pool during the add command.
993 This patch fixes bug #1008.
995 Release Version 2.2.6
997 db Remove extra data on estimate command in joblist for bat.
999 kes Cleanup of code in SD that sets the LastWritten date. This doesn't
1000 really change anything, but is the beginning of doing it *right*.
1001 To do it completely right the LastWritten date must be passed to
1002 the SD, but it is not yet done.
1003 kes Minor tweaks to some bat restore SQL.
1004 kes This patch fixes bug #1003 where putting the message output from
1005 a Verify job into the catalog results in a recursive loop. The problem
1006 seems to show up only with postgresql (to be verified).
1007 kes Correct %x to %p in postgresql debug statement.
1009 kes Fix bug #942 where lots of emails where generated when the heartbeat
1010 interval was low and Bacula wanted a different tape from the one in
1013 ebl Add new SD despooling attributes and Dir inserting attributes
1014 job status codes in the catalog (Status table).
1016 ebl Use qmake-qt4 instead of qmake when available (debian system).
1018 kes Add a security warning to src/cats/make_catalog_backup.in indicating
1019 that passing the password via the command line (arg 3) is insecure.
1020 This responds to bug #990 (it doesn't fix it).
1022 kes Set default debug_level to zero. This corrects bugs #991 and #993.
1023 kes Fix a crash in bat when it cannot connect to the Director for example
1024 if the Director is not running.
1025 kes Remove redundant INDEX (JobId) from File table in the trunk.
1026 This fixes bug #992.
1027 kes Make explicit exception to GPL in LICENSE to permit linking
1028 the Win32 FD with Microsoft VSS code.
1029 kes Apply the Solaris package patch from
1030 Masopust, Christian <christian.masopust@siemens.com>
1031 kes Apply the patch to optionally add a timestamp in the debug output
1032 submitted by Mariusz Czulada <manieq@wp.eu>.
1034 ebl Use PQerrorMessage instead of PQresultErrorMessage in postgresql
1035 backend (sql_strerror). Fixes bug #989
1037 kes Apply Michael Short's <mdshort@gmail.com> Win32 regress patch.
1038 It applied with no problems.
1039 kes Add PATH command to SunOS part of mtx-changer.in so that sed and
1040 awk are on the path.
1041 kes Redirect stderror to stdin on mt status command in mtx-changer.in
1042 since the status is returned on stderr on Solaris.
1043 kes Activate Close button on tray-monitor window. This fixes
1045 kes Check for NULL item in parse_conf.c before calling it. In the
1046 case of Device, there is no item and this caused a seg fault when
1047 Device appears in the conf file.
1048 kes Add a #define __CONFIG_H when including config.h in bacula.h. This
1049 avoids pulling in config.h multiple times in some new code.
1051 kes Fix spurious warning message printed when creating a volume with
1052 a LabelFormat. This fixes bug #976.
1054 Release Version 2.2.5
1056 kes Add JobId in place of Job name in all the Jmsg() output.
1057 kes Correct the APP_DESC for the Win32 storage service (remove an e).
1059 kes Make maxvol-test and new more strict maxvol2-test work.
1060 kes Print JobId in all Jmsg() job output.
1062 kes Add new SD despooling attributes and Dir inserting attributes
1063 job status codes. This fixes bug 961.
1064 kes Fix Win32 drive display in bat version browser. Fixes bug #962.
1066 kes Fix doc issue. This fixes bug #963.
1067 kes Fix listing performance problems in bat. Pointed out by
1069 kes Remove old debug code.
1070 kes Fix bat code that tests for Win32. This should fix bug #968
1071 kes Query 5 list wrong Vol after migration. This fixes bug #960
1073 ebl Fix #969 where user can't change Replace option in restore menu.
1075 kes Save jcr in thread specific data (tsd) for each thread.
1076 kes Make Dmsg() print JobId as -%u.
1077 kes Make Jmsg, Emsg, and others automatically pickup the jobid
1078 for the thread if it exists.
1079 kes Remove old reservation debug jid code.
1080 kes Remove get_jcr_from_tid() from OpenSSL and tls code.
1081 ebl Add an option that permit to specify spool size in job
1082 definition. (Applying patches/testing/spoolsize_per_job.patch).
1083 You must upgrade SD and DIR at the same time.
1084 dvl Add new configuration item --archivedir
1085 dvl Adjust regression tests to use tmp not /tmp. This will allow
1086 multiple concurrent runs of the regression tests.
1088 kes Fix race condition that drops final block written to volume.
1089 This happens in rare cases with multiple simultaneous jobs
1090 when the Volume fills. This fixes bug #964. May be related
1091 to bug #935 and possibly #903.
1092 kes Eliminate more strerror() and replace with bstrerror().
1093 kes Remove BSD getopt and replace with unrestricted IBM version.
1094 kes Fix Win32 build for changed calling sequences.
1095 kes More tweaks to the mount volume routines to get everything
1096 right. Changed variable name from find to have_vol, which is
1097 much easier to understand.
1098 kes Enhance btimer debug code.
1100 kes Fix FD->SD authorization failure, which was due to spurious
1101 wakeups from a pthread_cond_timedwait(). Simply check the
1102 predicate before continuing. This fixes bug #953.
1103 kes Add const char where needed (more to do). Remove temp debug code.
1105 kes Setup SQLite busy handler before doing queries. Fixes bug #967.
1106 kes Don't overwrite error message in check_tables_version.
1108 kes Unlock batch insert tables with same calls used elsewhere.
1109 kes Allow starting 59 jobs a second.
1110 kes Make SD session key more random.
1111 kes Add retry for SQLite opening db if it fails. Probably helps
1113 kes Suppress extra error messages during batch insert failure.
1115 kes Add jcr to timer packets so if killed message can be sent to job.
1116 kes Add JobId to all Dmsg() output.
1117 kes Put some FD auth code on dbglvl rather than fixed.
1118 kes Return insert attributes error message in db msg buffer to avoid
1119 false error messages. Helps fix bug #966.
1120 kes Separate batch init error messages. Probably helps fix bug #966.
1121 kes Make SD code that contructs attribute insert check string lengths
1123 kes If Dir gets an error during inserting attributes, cancel SD.
1124 This reduces unnecessary error messages.
1126 kes Correct search boolean for getting Volume info
1127 ebl Cleanup batch insert code. Probably fixes bug #965.
1128 kes Back out one small change to the reservation system (reserving a volume).
1129 kes Rework how a Volume is mounted. It is now much more intelligent and
1130 will always attempt to use any mounted volume if possible and reduces
1131 calls to the Director asking about volumes.
1133 kes Turn off some code when batch insert not enabled.
1134 kes Edit FD name in connect error messages.
1135 kes Rework the reservation system to take into account that the Director
1136 might give us a Volume that is different from the current one being
1137 used, and to ensure that we don't exceed Maximum Volume Jobs.
1138 This fixes (mostly) bug #947 ' Maximum Volume Jobs = 1 produces
1139 fatal error with multiple jobs running'
1140 kes Add more debug code in reservation system.
1141 kes Implement maxvol-test to check bug #947.
1143 kes Add code to handle tray monitor separated from Win32 FD.
1144 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
1146 kes Add missed return in fixing verify bug -- trunk only.
1147 ebl Fix a command parser issue causing a director segfault.
1148 kes Fix ANSI tape labeling. Fix restoring ANSI labeled Volumes.
1149 This fixes bug #954.
1150 kes Increase the max block size to 4MB fixes bug #957.
1151 kes ERABT if user sets min block size > max block size. Fixes bug #956.
1152 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
1153 is not properly mounted (recognized) during a poll.
1154 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
1155 Job that has differences reports Verify OK.
1156 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
1158 ebl Add an option to operate on all pools with update vol parameters.
1159 This complete the project 20. Patch from Nigel Stepp.
1160 ebl Add history support to bconsole when using readline.
1161 Using Ctrl-D to exit doesn't update .bconsole_history
1162 kes Modify new volume algorithm to use max MediaId for generating next
1163 volume number rather than the count of Volumes. This should essentially
1164 eliminate the failure rate if some volumes were deleted. Bug #921.
1165 kes Begin implemention of Optimize Job Scheduling.
1166 kes Implement restore callback that Dirk and I agreed on for bat
1167 restore. This fixes bug #928. Restore of backup of zero files fails.
1168 kes Fix SQL Catalog logging which broke with new db_escape_string
1171 Release Version 2.2.4
1173 kes Fix bacula_cats.def for new db_escape_string().
1174 kes Increase size of name string when FD making connection to SD.
1175 May fix bug #953. FD->SD connection failure.
1177 kes Add code to help Dan debug 2drive-incremental-2disk test.
1178 kes Add code to try to fix bug #908.
1179 kes Add waits to multiple exit detection code to try to force pid
1180 file to always be deleted.
1181 kes Restore good dev.tar.gz to rescue set appropriate binary property.
1182 This fixes bug #950.
1183 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
1184 trying to switch drives by checking for blocking before unblocking.
1186 kes Cancel storage daemon in all cases where FD reports error. This
1187 should fix virtually all cases of bug #920.
1188 kes Fix db_escape_string() for MySQL which did not compile.
1190 kes Fix error message that was clobbered when Dir tells SD it does not
1191 have write permission on Volume. This should fix a minor point
1192 in bug #942, but not the main problem.
1193 kes Add code to cancel job in SD if FD connection fails. This should
1195 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
1196 dvl Pass jcr and db into db_escape_string() to enable better escaping
1198 kes Fix migration code to get correct Volume name with multiple volumes
1199 by skipping |. Fixes bug #936.
1200 kes Implement patch supplied by Landon to fix bug #944 where using
1201 TLS with bconsole uses 99+% of the CPU.
1202 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
1204 kes Move patches into patches directory.
1206 ebl Fix bug #946 about 'bacula-dir -t' which doesn't works
1209 ebl Using 'm' in bconsole will show messages like before,
1210 and not memory usage.
1211 kes Fix bug #935, and probably also bug #903 where files were not
1212 restored. MediaId was not properly set in JobMedia record after
1215 kes Suppress chown and chmod error messages if the FD is not running
1218 kes Apply Martin Simmons' patch that should turn off the new API usage
1219 when batch insert is turned off allowing building on older
1221 kes Add ./configure search in qwt-qt4 for qwt package
1223 kes Bacula is now free of 3rd party GPL copyrighted code!
1224 kes Remove idcache.c
1225 kes Add guid_to_name.c/h which replace idcache.
1226 kes Remove enh_fnmatch.c. Make code that references it use fnmatch.c
1228 ebl Detect if new PosgreSQL batch insert API is present.
1229 kes Correct incorrect mempool call causing Director crash. Occurs on
1230 systems without va_copy().
1231 sb Update spec files for 2.2.1 release
1233 kes Fix memory pool call in ua_output.c. bug #934.
1234 kes Replace fnmatch.c and fnmatch.h by modified BSD versions.
1235 Add test program to fnmatch.c
1237 kes Integrate patch to README.vc8 from
1238 Hederer Jean-Sébastien <hedererjs@asperience.fr, had to manually
1239 edit it to get it into Unix patch format.
1240 kes Implement mkpath.c to replace old FSF makepath.c
1242 kes Implement savecwd.h and savecwd.c. Remove FSF versions.
1244 Release Version 2.2.1
1246 kes Update POTFILES.in
1247 kes Cleanup a few underquoted AC_DEFUNs in configure
1248 kes Apply patch from Martin Simmons that adds a test for va_copy to
1251 kes Fix bug #921 by increasing the number of tries to create a new volume
1253 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
1254 can be called multiple times. Implement a version for machines
1255 without va_copy() that gets a big buffer.
1257 kes Integrate more portable zone offset code into bsmtp.c
1258 Submitted by Attila Fülöp.
1260 kes Fix bad SD->FD return status reported by
1261 (James Harper) <james.harper@bendigoit.com.au>
1262 ebl Fix a bug in read_close_session which return random status
1263 thanks to James Harper
1265 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
1266 and directory names during restore of single file/directories.
1267 kes Add sanity checks to .sql command when string is empty. Hopefully
1268 that will resolve Dirks Director crash.
1270 kes Apply patch submitted by Martin Simmons that corrects a seg fault
1271 in the bsmtp chat subroutine when debug is >= 10.
1273 kes Fix Director crash when running bat SQL queries.
1274 kes Add David's notes on Item 8: Copy pools.
1276 kes Rework projects file to be current and ready for a vote.
1277 kes Enhance lex scanner error message.
1279 kes Tweak LICENSE file to mention BSD code.
1280 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
1281 if specified on the ./configure.
1282 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
1283 This class is intended to allow us to open a second bsock to the
1284 Director while in the restore subdialog.
1286 kes Fix configure to create bat Makefile before creating dependencies.
1287 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
1288 kes Add a tooltip to the tray monitor.
1289 dvl Set the Director's PID file before dropping privs. This fixes
1292 kes Update AUTHORs file
1293 kes Increase the default max concurrent jobs to 20 in FD and SD to
1294 correspond with the default .conf files.
1295 kes Rewrite the Win32 service routines. This eliminates the 3 copies
1296 some different, of the same file created by RN when porting the
1298 kes Rearrange some of the Win32 directories and the placement of the files
1300 kes Set DEVELOPER flag in version.h
1302 ========================================================================
1303 Release Version 2.2.0
1305 kes Apply a second doc patch from Marc.
1306 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
1307 improves the tips section that discusses how to setup multiple
1310 kes Update bat README file.
1311 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
1312 corrects a typo in the Recycle status check in db_find_next_volume().
1313 This will probably fix a number of annoying problems with multiple
1315 kes Modify most of dird/msgchan.c to use bsock class calls rather than
1316 bnet calls -- no functionality change.
1318 kes Modify the Verify output to specify if files are missing on
1319 the Volume(s) or disk. Fixes confusion in bug #916.
1320 kes When more than one Volume is read in a migration job, the last
1321 Volume bytes reported are from the last read volume rather than
1322 the last written volume. Fixed. This fixes bug #910.
1323 kes Fix display of Recycle flag after update volume=foo recycle=yes.
1324 It previously printed New Recyle flag is: no. This fixes bug
1327 kes Correct seg fault when switching tape drives during restore.
1328 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
1329 be used until after 2.2.0 release.
1331 kes Remove fnmatch() in SD that permitted wild card specifications.
1332 This fixes bug #914.
1334 kes Fix %g in filename returned by SQL for browse tree reported by
1336 kes Fix configure so that it puts config.out in the cwd rather than
1338 kes Attempt to fix the locking problem reported by Eric in bug #906.
1339 kes Make berrno class to leave errno unchanged after constructor call.
1340 kes Make bnet_server use the heap rather than the stack to allocate
1341 its socket fd pointers to avoid a crash at termination. Problem
1342 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
1344 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
1345 and putting it in depkgs-qt along with Qt4.3.
1347 kes Rework code in acquire.c that switches drives for reading when
1348 the Media Type does not match. This should fix bug #906
1350 ebl Fix a director segfault during job setup #907
1351 kes Correct seg fault in postgresql when first operation returns no
1352 rows. Fixes Dirks File browser problem seg fault with bat.
1354 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
1355 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
1358 kes Implement PopUp YES/NO dialog for bat.
1360 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
1362 kes Correct RunScript to terminate job in FD on failure.
1363 kes Change abort_on_error and AbortJobOnError to fail_on_error
1364 and FailJobOnError in RunScripts.
1365 kes Minor tweaks of code formating in RunScripts, principally to
1366 avoid depassing 80 columns.
1368 kes Eliminate one #ifdef Win32 in bsmtp
1369 kes Implement grow tool to grow a file for testing very large databases.
1370 kes Add big-vol-test to test Bacula seeking with > 5GB.
1373 kes Modify find_next_volume() to return all values in Media record.
1374 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
1378 kes Update Release notes
1380 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
1381 Warning, in previous beta version, all media get from scratch keep their
1384 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
1385 This should fix bug #842. Made a note to look at removing the temp
1386 files at the end of the install.
1387 kes Add ability to mount and unmount a file device providing it is
1388 marked as being removable and has the appropriate mount and unmount
1389 commands defined in the Device resource. This fixes bug #830.
1390 kes When applying a storage override, release all previous storage
1391 definitions rather than just prepending the new storage.
1392 This should prevent a good deal of confusion.
1394 kes Implement ./configure search for qwt libraries.
1396 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
1397 Win32 FD. This should fix bug #893.
1398 kes Remove an unnecessary beep in Win32 init code.
1399 kes Update copyright dates in Win32 executable about boxes.
1400 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
1401 code with a BSD getopt.c and getopt.h.
1402 kes Remove sched.h from the Win32 compat directory -- not used.
1403 kes Remove the Exit menu item from the Win32 tray monitor. If you really
1404 need to shut it down, do it through the services panel or the command
1406 kes Remove some inappropriate Bacula FSFE copyrights.
1407 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
1408 kes Fix regress config non-portable test as pointed out by
1409 Florian Heigl <florian.heigl@gmail.com>
1410 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
1411 as pointed out by Florian Heigl <florian.heigl@gmail.com>
1413 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
1414 Reported by Frank Sweetser.
1418 kes Fix client-only build.
1419 kes Integrate client-only fixes for bsys (initgroups) and conio from
1420 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
1421 kes Make arguments to get_scratch_volume() in same order as other
1423 kes Rework the prune_volumes() subroutine so that after purging and
1424 no volume found in desired pool, it will check for a scratch
1425 volume. This prevents recycling the whole scratch pool.
1426 kes Add code to status storage to print boffset_t (largefile support).
1428 kes Move qwt (Graphics libarary for Qt4) to depkgs.
1429 kes You now need a --with-qwt=<dir> to be able to build bat.
1430 kes Update src/win32/cats/bacula_cats.def to include the new
1431 db_get_query_dbids() call on Win32.
1433 kes Correct a problem when selecting a scratch volume and moving
1434 it to another pool that lost some columns.
1435 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
1436 kes Enhance Autochanger error messages to include Volume and device name.
1437 kes Rework prune_volumes() code to take account of InChanger flag,
1438 and to handle recycling volumes going to the Scratch pool and
1439 current pool because the RecyclePool directive.
1440 kes Implement a better and more efficient db_get_query_dbids() to
1441 handle creating and passing back a list of DBIds.
1445 kes Start work on new more efficient DBId subroutine. First use
1446 will be for recycling volume to Scratch inchanger.
1447 kes Increase number of JobIds in pruning from 1000 to 10000.
1448 This to be replaced by above routine.
1449 kes Begin implementation of building Qt4 on Win32.
1450 kes Correct typo in fix I added for bad TLS shutdown.
1451 kes Pull 2.0.3 patches into patches directory.
1452 kes Update Release notes. Include qt-console in line count.
1453 kes Update Projects file.
1455 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
1456 bug in migration code where a job that spanned two volumes
1459 kes Implement new BST_DESPOOLING blocked state. Change from locking
1460 during despooling in SD to blocking. This means that other threads
1461 can work with the device structure, in particular the reservations
1462 system while despooling.
1464 kes Fix return in reservation message queue that missed clearing
1465 the jcr lock (implemented 26Jun07 below).
1466 kes Rename a number of dev methods to make locking function names
1468 kes Document locking in lock.c. Move lock structures to new file
1471 kes Move reservations message lock to lock jcr only this
1473 kes Move main SD locking code into lock.c (new file).
1474 kes Update Win32 build to include lock.c
1478 kes Dirk committed the qwt library code for drawing graphs in bat.
1479 kes Tweak install of qwt so that it is integrated with ./configure.
1481 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
1482 out by Eric (my typo).
1483 ebl Fix configure.in to get batch mode enable
1484 kes Return correct string from authenticate.cpp in bat when connecting
1486 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
1487 spurious line drops when using TLS.
1488 kes Do not file reparse points when restoring a file that already
1491 kes Implement Windows reparse points -- similar to directories, but
1492 we do not descend into it. This is a first cut. They seem to
1493 be backed up, but restore is not yet tested.
1494 kes Remove restore_blocking in tls code when shutting a socket to leave
1495 it in blocking mode. Hopefully this will fix the encryption bug
1496 reported by Frank Sweetser.
1497 kes When opening a file for backup, tell the OS that we are going to
1498 read it sequentially -- optimization.
1499 kes Change variable names in authenticate_director() to not conflict
1500 with member names in bat. Caused great confusion with compiler,
1503 kes Queue openssl error messages in case of comm problem.
1504 kes Do shutdown() call if socket terminated.
1505 kes Remove some duplicated code in tls.c
1506 kes Move more of the bsock member variables into private and access
1508 kes Add Frank Sweetser's tls-test to the regression suite.
1510 kes Add Swedish sv.po file
1512 kes Don't print clock skew message in FD if less than 3 seconds diff.
1513 kes Add a bit of VSS info to status client.
1514 kes Implement a first cut of Vista VSS, using Win2003 code.
1516 Release: 2.1.20 beta
1518 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
1519 loaded tape but uses first drive).
1520 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
1521 This was indeed a Win32 issue.
1523 kes Simplify search of autochanger for in-use Volume.
1524 kes Fix exit condition of check for in-use volume. kes Remove
1525 inappropriate my_postgresql_free_result() in db_close()
1527 kes Fix bad return in FD when encryption signature not found.
1528 Probably caused a crash.
1529 kes Inhibit missing encryption signature error messages for
1530 file types where no signature computed.
1531 kes Correct inverted check on autochanger in reservation system.
1532 kes Tweak debug code in autochanger reservation.
1534 kes Add some additional locking in the cats directory in subroutines
1535 that modify packet variables called from batch insert.
1536 kes Rework how dcrs are allocated. new_dcr() can now be called
1537 with an existing pointer, and it will simply clean it up.
1538 This allows the reservation system to test various different
1539 devices, and will permit easy device changes.
1540 kes A bunch of changes all over to handle new new_dcr() calling
1542 kes Work more on the Volume management in the SD. Remember Volumes
1543 for tape drives and for autochangers (even virtual disk changers).
1544 kes When looking at the Volume list to reserve a drive, handle
1545 autochanger names correctly by interating through the changer
1546 devices. Also call the Director to see if a Volume is suitable
1547 for the current job.
1548 kes Fix some bugs in bscan. Make sure all media records are written.
1549 Make sure that valid JobMedia records are written for disk files.
1550 Previously they were completely wrong.
1551 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
1552 that the URLs don't change and so that the developers will all
1553 work off the same copy. Rebuild from scrach.
1554 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
1556 Release: 2.1.18 beta
1558 kes Fix seg fault in FD from incorrect digest size.
1559 kes Fix argument to non-OpenSSL crypto.c subroutine.
1561 Release: 2.1.16 beta
1563 kes Remove a few malloc()s from the encryption code.
1564 kes Use the class calls to bsock in filed/backup.c and restore.c in
1565 place of the old bnet_xxx code.
1566 kes Implement code that does an on the fly calculation of the
1567 signing digest during restore of encrypted files. It makes
1568 a best guess at the algorithm, and if it is not correct, will
1569 then revert to the old code which reads the file after it is
1571 kes Implement at least one missing crypto stream in stream_to_ascii()
1572 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
1573 #877 where a reload with bad syntax causes Dir to exit.
1575 Cut: 2.1.14 beta (not released)
1577 kes Do not free a volume on a tape drive until another volume is
1578 mounted and read, or the autochanger unloads the volume.
1579 This should help the SD re-use volumes that are already mounted,
1580 and should fix bug #886.
1581 kes Apply patch from user brettedgar that allows gnome2-console include
1582 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
1583 kes Apply patch from Lucien Weller that fixes day of week calculation
1584 because of DST flag problem. Fixes bug #887.
1586 kes Move find_next_appendable_volume() to after acquiring a valid device
1587 in reserve.c. This fixes bug #864 -- confirmed by reporter.
1589 kes Unable to reproduce bug 872. However added additional testing for
1591 kes Bug #874 resolved by documenting SQLite limitations.
1592 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
1593 kes Bug #881 resolved by removing typo in mtx-changer script.
1594 kes Made Frank Sweetser's wiki the official Bacula wiki with his
1595 approval. Added a link to the wiki on the web page, and implemented
1596 a backup from http://paramount.ind.wpi.edu
1598 kes Fix update allfrompool to pass pool name.
1600 kes Convert to pure GPL v2 license.
1601 kes Fix sscanf problems reported by Peter Buschman that caused
1602 a bus error on Solaris.
1603 kes Rework (simplify) the select prompt in bat.
1604 kes Move get_jobid_from_tid() into lib and create a
1606 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
1607 should definitely fix the problem of lost error messages in the
1609 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
1610 kes Eliminate tcpd.h from the project. Enclose the #include from the
1611 library with extern C ...
1612 kes Add print of signal name when a signal is trapped.
1614 Release: 2.1.12 beta
1616 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
1618 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
1619 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
1620 makes SQLit3 run 30 times faster, though a bit less safe.
1621 kes Implement --with-batch-insert in configure and detection of thread
1622 safe libraries. It is on by default, but turned off if no thread
1623 safe library (e.g. SQLite 2) is available.
1625 kes Fix Bacula PostgreSQL buffer overruns.
1626 kes Do better checking for NULL results returned from PostgreSQL;
1627 implement retry for failed queries; clear results buffer after
1628 failed query. Hopefully this will correct the PostgreSQL failures.
1630 kes Implement algorithm to handle only one appendable volume with
1631 Prefer Mounted Volumes = no.
1632 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
1633 returned from a query.
1634 kes Make volume lock recursive.
1635 kes Implement an additional volume reservation algorithm that
1636 starts by considering all reserved volumes then uses the
1637 old brute force algorithm of searching the resources to
1638 find a suitable device.
1639 kes Add new reservations debug code and refine the old code.
1640 kes Update the win32/dll/bacula.defs file.
1642 kes Tweak reservations algorithm to permit a few more cases, i.e.
1643 volume reserved, but on different drive, ...
1644 kes Enhance SD status to include Pool and Media Type for drive in a
1645 more readable format (a bit longer).
1646 kes Fix PostgreSQL double free.
1648 kes Minor refactoring of restore decryption code.
1649 kes Add code to smartall.c to detect double free of a buffer.
1651 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
1652 so that bsmtp will create a correct email address (mailbox only).
1653 kes Modify 'memory' command so that the buffers are listed as 'In use'
1654 to avoid confusion with Orphaned buffers.
1655 kes I reworked the OpenSSL include/lib flags to be handled in
1656 the standard Bacula way, which should fix bug #863 concerning
1657 non-standard OpenSSL libraries.
1659 kes Implement Help Browser window for bat.
1660 kes Fix reload bug that reset StorageId to zero.
1662 kes Fix TLS #ifdefing when TLS turned off.
1663 kes Ensure that when labelling a tape with Slot=0 that InChanger
1665 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
1667 kes Add StartTime to final uar_sel_jobid_temp query so that we can
1668 add DISTINCT (required by PostgreSQL).
1669 kes Implement BSOCK authenticate_director() method. Eventually will
1670 authenicate all daemons.
1671 kes Move several more functions into the BSOCK class.
1673 kes Add code to tell the OS that we no longer need a cached
1674 file that we were reading. In findlib/bfile.c. Also,
1675 only cache files that we are reading. Thanks to
1676 Tobias Oetiker <tobi@oetiker.ch> for the idea.
1677 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
1678 kes Implement script to automatically generate cats and dll .def
1679 files for Win32 dll.
1680 kes Update README.mingw32 to include new .def file generation.
1681 kes Correct typo in UTF-8 error message as reported by:
1682 jhernandez <julianhernandez@gmail.com>
1683 kes Add additional sm_check() code on debug level 1.
1684 kes Set default debug level to 1.
1685 kes Trap SIGABRT in attempt to get traceback.
1687 kes Reduce bat connect timeout from 30 to 15 seconds.
1688 kes More restructuring and implementing BSOCK class in place of
1690 kes Remove a few unnecessary malloc() tests in crypto code.
1691 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
1692 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
1693 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
1695 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
1697 kes Fix Verify InitCatalog. The attributes were not pointing to the
1698 correct saved location.
1699 kes Implement message callback so that GUI is sure to get all
1700 daemon messages. Currently displayed in a dialog in bat.
1701 kes Ignore SIGUSR2 (Bacula timer) in bat.
1702 kes Apply regress patch from bug #859 to allow regress to work
1703 with Solaris compiler.
1705 kes Begin adding TLS support to bat.
1706 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
1707 clean up lex.c and make it more readable.
1709 kes Move more bnet functions into the BSOCK class.
1710 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
1711 kes Complete change of berrno strerror() method to bstrerror()
1713 Release: 2.1.10 beta
1715 kes Cleanup incorrect email addresses in bsmtp.
1716 kes Make bat display initial messages rather than discard them.
1718 kes First cut of adding .mod to the run command.
1719 kes Implement auto display of messages in bat.
1720 kes Enhanced preferences to allow all Bacula output to be
1723 kes Try to make bsmtp date routines more generic.
1724 kes Fixed bug #856 autochanger documentation.
1725 kes Rework bsmtp date editing for Win32. This fixes bug #854.
1726 kes Add new cats entry point so Win32 builds.
1728 kes Attempt to fix bsmtp date editing on OSes without %z editing.
1730 kes Do better checking for the MySQL 64 bit libraries looking for both
1731 .a and .so libraries.
1732 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
1733 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
1734 kes Require the thread safe version of MySQL during configure. Thanks
1735 to Andre Noll for pointing this out.
1736 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
1737 continuing in migration code.
1738 kes Apply implementation of tray-monitor font derived from gnome-console
1739 submitted by Andreas Piesk <a.piesk@gmx.net>
1741 kes Eliminate important memory loss in SQLite
1742 kes Fixed the batch insert MySQL thread specific data that was not
1743 being freed. See cats/mysql.c:db_thread_cleanup().
1744 kes Fix restore before command.
1745 kes Convert old hdr.name to name() in a few places.
1746 kes Implement update jobid command.
1747 kes Return all time_t dates in db_get_job_record()
1748 kes Stop watchdog in SD earlier.
1749 kes Put Pool just after Storage in please mount message.
1750 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
1753 kes Update the po files.
1754 kes Fix Verify InitCatalog by making it cache attributes.
1756 kes Change name bacula-bat to bat for man 1 page to correspond to
1758 kes Check for client and store NULL pointers in status command. This
1760 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
1761 kes Fix sign extended editing of %p.
1762 kes Clean out a little old #ifdefing in cats/mysql.c
1764 kes If time diff between DIR and FD is more than 600 seconds convert
1765 INFO message to WARNING.
1766 kes Implement heap size display in status for all daemons.
1767 kes Attempt to fix MySQL db open memory loss (not successfull).
1768 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
1769 kes Eliminate memory loss in MySQL (possibly other SQLs) during
1770 Query. This looks like a MySQL but but by doing extra releases,
1771 the memory goes away. This should fix bug #847.
1773 kes When backup fails, cancel SD before waiting for sd termination.
1774 kes If SD is waiting for FD to connect during cancel, wake up the
1776 kes Fix fsf code so that errno is correctly reported.
1777 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
1779 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
1780 so that Bacula doesn't later stumble into a seg fault.
1781 kes Use the term Restore Client in the restore Job report.
1782 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
1783 the original job's FileSetId.
1784 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
1785 spooling in migration jobs. Not yet tested.
1786 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
1787 reading conf file from a pipe. However, do it with open_bpipe()
1788 rather than popen. Not yet tested.
1790 kes Fix an ugly bug where the VolCatBytes were getting updated
1792 kes Implement bconsole memory command that prints current memory
1793 usage, plus smartalloc dump.
1794 kes Clarify some error messages in backup, admin, and migrate.
1795 kes Shrink label dialog to smaller size.
1796 kes Invert Cancel OK buttons on restore to be OK Cancel.
1797 kes More strerror() to bstrerror() conversions.
1799 kes Start implementing bstrerror() in place of strerror().
1800 kes Stripping path -- seems to work.
1802 kes Prevent door and port files from being restored (mostly
1804 kes Free an unreleased buffer in compat code.
1805 kes Change console Job name from *Console* to -Console- to eliminate
1806 Win32 filename problems. Put Win32 path separator when creating
1807 Console file. This fixes bug #846.
1808 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
1810 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
1812 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
1813 to force Win32 error message.
1815 kes First cut strip path. The data should be passed to the FD,
1816 but nothing is done with it yet.
1817 kes Enhance the digest and signature routines in the crypto
1818 library to accept a JCR and to use it to print error messages
1819 so that they will go in the Job report rather than the daemon's
1821 kes Simplify some of the verify signature code.
1822 kes Simplify a few of the alternative returns in the signature
1825 ebl Use only POSIX regex instead of GNU regex in breg.c for
1826 File relocation. It fix broken freebsd compilation.
1827 kes Convert all other Dir files to use new ua class message
1829 kes Tentative fix for missing digest signature in bug 807.
1830 kes Correct handle problem in new win32_ftruncate routine.
1831 kes Convert ua_purge.c and ua_update.c to use new ua class
1832 message routines for bat.
1834 kes Correct incorrect installation of LICENSE in Win32 installer.
1835 kes Display LICENSE at the beginning of the Win32 install.
1836 kes Attempt to correct the need for the png files to be installed
1838 kes Reapply my bat.conf install script in qt-console. I think I
1839 editted bat.pro instead of bat.pro.in and it was lost.
1840 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
1841 the /var/lock/subsys for subsysdir. Also corrects typos in the
1844 kes First cut update job.
1845 kes Correct configure to include qmake of src/qt-console directory.
1847 kes Make restore job yes/mod/no print in one command so GUI works.
1848 kes First cut implementing backup and restore client.
1849 kes Correct editing in Verify output that caused a seg fault.
1851 kes Insure that bat.conf is not overwritten during installation.
1852 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
1853 while I was implementing migration in March 2006 !
1855 ebl Cleanup file relocation, using char *RegexWhere instead of
1856 char *where + bool where_use_regexp
1857 kes Update some manpages and add bat manpage.
1858 kes Make a first cut at converting bacula.spec.in for bwx-console
1860 kes Apply patch from John Goerzen to add hostname as fourth argument
1861 to make_catalog_backup script.
1862 kes Fix typos I introduced into bsmtp.c
1863 kes Make pm_strxxx() routines handle input of NULL pointer. This
1864 is to protect from NULL pointers returned from SQL databases.
1865 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
1866 kes Add more debug to FIFO code -- fix fifo regression test.
1868 kes Implement posix_fadvise in FD, and for reading spool files in SD.
1869 kes Add thread timer to bnet_connect() to break from OS if wait time
1872 kes Update Win32 build to include new files, new symbols, and
1874 kes Implement socket level heartbeat (tcp_keepidle)
1875 ebl Commit File relocation patch
1876 kes Make bat have 'make install' target.
1877 kes Warn during install if old gnome-console binary found.
1878 kes Warn during install if old wx-console binary found.
1879 kes Add -8 option to bsmtp command line to add content type utf-8.
1880 Fixes bug #809. (Character coding problem in bsmtp).
1881 kes If < is found in target (from, to, cc) then do not enclose the
1882 target in < > in bsmtp. Fixes bug #772 (malformed address).
1883 kes When printing certain items in dbcheck, stop after 300000.
1884 Fixes bug #822. (dbcheck loops).
1885 kes Incorrect status in Dir after waiting for mount with poll set.
1888 kes Extend idea of Prefer Mounted Volumes to mean a volume about
1890 kes Print waiting to reserve a device every 5 mins.
1892 kes Don't call close_part in label.c if tape and relabel.
1893 kes Don't free volume if busy in close() -- should help with
1895 ebl Fix #824 RunScript bug (After script could be execute twice)
1896 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
1897 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
1898 Add a regression script to test RunScript
1900 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
1903 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
1904 deprecated. No additional bugs will be fixed, and they will be dropped
1905 in a future release (probably 2.4.0).
1906 kes Change name of wx-console to bwx-console to make it more Bacula
1908 kes Change the name of gnome-console to bgnome-console to make it
1911 kes Some time in March, a Feature Request with patch from Jorj Bauer
1912 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
1914 The ability for the director to validate a Client (FD) CN against
1915 an arbitrary set of patterns rather than the hostname, with
1916 A new 'TLS Allowed CN' set of directives which are implemented
1917 in the Client resource. Then pattern matching is used in place
1918 of hostname matching against the Certificate's CN. As an example, we
1919 have certificates which (a) use a local CA, and (b) have a CN of the
1921 kes Add new/changed entry points to Win32 build
1922 kes Create unaccepted-projects for projects that are not accepted.
1923 kes Simplify locking in the reservations system.
1924 kes Add more debug code in reservations.
1925 kes Make sure error condition on reserving a volume is handled correctly.
1926 kes Correct handling of volume_in_use.
1927 kes Correct handling of initializing a device.
1928 kes Move handling of broadcasting releasing a device into release_device().
1929 kes Correct attaching dcr to dev so that it is only done if device
1930 is properly initiated.
1932 kes Locking debug level tweaks in SD.
1933 kes Tweak new Volume code.
1935 kes Add exec external-command [wait-seconds] to bconsole. This
1936 executes the external-command. Note! normally external-command
1937 should be enclosed in double quotes.
1938 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
1939 it should normally be off in a production system.
1941 kes Implement die command for SD so that we can force it to dump.
1942 kes Implement SD lock debug code.
1943 kes Implement new algorithm for keeping Volume list in SD. It
1944 is now owned by the device.
1946 kes Implement new code for freeing in use volumes that should
1947 resolve if not all, some of the problems of multiple drive
1948 tape conflicts described in bug 801.
1950 kes Fix gui/bacula-web/images files in svn.
1951 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
1953 ebl Fix a bug in batch mode (in string escape)
1954 kes Correct migration prune SQL typo that crept in in a
1955 recent 2.1.x change.
1957 kes Move bnet_despool() into class in bsock.c
1958 kes Modify job report to include director name and Build OS.
1959 kes Move drop root privilege and check_catalog() before fork.
1960 kes Add update database scripts (version 9 to 10) to updatedb directory.
1962 ebl Check size and age of each file after its backup to see if
1963 it has changed during backup, if 'checkfilechanges' is set.
1964 The FD will do an extra check (stat(2)) after
1965 each file backup. mtime, ctime and size are compared with
1966 'before backup' information. If time or size mismatch, an
1967 error message will be generated. You must upgrade FD to use it.
1969 kes Make database name and user configurable
1970 --with-db-name=xxx --with-db-user=xxx
1971 kes Add back database type to message.c for debugging.
1973 kes Implement dir_sql() which issues an SQL query.
1974 kes Modify bat medialist to use dir_sql() and do some minor C++
1975 formatting as well as eliminating a number of pointers, simplifing
1978 kes Fix some of the mtx-changer grep commands for tape label readers.
1979 kes Convert a number of bsendmsg into the appropriate send/warning/error
1980 message class calls.
1981 kes Suppress the using database message in the .sql command.
1982 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
1984 kes Add context menu for floating a window.
1985 kes Some minor cleanup and name changes in qt-console
1986 kes Add doing mt setblk 0 in Win32 mtx-changer.
1987 kes Apply Martin's bug fix to move definition of ENODATA for
1989 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
1990 sqlite2 and sqlite3.
1992 kes More pruning cleanup.
1993 kes Turn on wait_for_drive by default in mtx-changer.
1994 kes Turn on Batch insert code by default as it now passes regression.
1995 kes Add ./configure --enable-bat to enable building of Bat.
1996 No install yet though.
1998 kes Implement a new .sql command for bat.
1999 kes Implement code to turn off pruning in obtaining the next volume.
2000 Pruning is turned off for the status dir command, but turned on
2001 for SD requests and for the list nextvolume command.
2003 kes Correct Qmsg() that was not updated correctly when committing a
2004 previous change (probably the recent TLS patch).
2006 kes Write new subroutine is_volume_purged() that explicitly checks
2007 if the Volume is purged, and if so marks it as such. This should
2008 resolve problems reported about needing to mount twice to recycle
2010 kes Rewrite pruning algorithm to do more work in the SQL engine, and
2011 to pass a list of JobIds to be deleted to SQL. Also, minimize the
2012 amount of duplicated code.
2013 kes Do volume pruning only for the Media Type desired (reduces pruning time
2014 if multiple Media Types are in the same pool).
2015 kes Implement more detailed info in the Job report for the Bacula version
2017 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
2019 ebl Add bbatch tool to bench database and insert mode.
2020 Fix sql quote stuff in batch mode
2021 Fix sql stuff for mysql
2023 kes Correct problems with am/pm scheduling. Fixes bug #808.
2024 kes Implement new prunning code that prunes up to 1000 jobs at
2025 the same time. The same technique can be applied to a number
2026 of other prune/purge subroutines.
2027 kes Add an insanity check when starting a new tape job to ensure
2028 that the tape position has not been changed. If so fail the
2030 kes Fix Win32 build for dlls to add the folllowing:
2031 src/lib/bsock.c -- new file with new entry points
2032 src/lib/dlist.c -- new entry points
2033 src/cats/sql_create.c -- new entry point
2034 src/cats/sql_cmds.c -- new DATA item exported
2036 ebl batch mode cleanup bscan-test is ok now.
2037 kes Implement SD code to check length of disk volume before appending.
2039 kes Correct return status on db_batch... routines.
2040 kes Add call to db_write_batch_file_records() to migration code.
2041 ebl Fix AfterJob timing
2042 kes Move the checking of the database in initializion of the Director
2043 to after we drop privileges. This avoids the need for both root
2044 and bacula access to the DB.
2045 kes Correct a misplaced variable definition in src/filed/backup.c
2046 kes Correct how the new batch insert db_create_attributes_record()
2047 uses the arguments. Caused a seg fault in bscan.
2048 kes Implement lock() and unlock() methods in DEVICE class.
2049 Implement block() and set_block(xx) methods in DEVICE class.
2050 kes Modify bnet_connect() so that it uses time() to check for the
2051 wait time expiring (on some OSes, some system calls may not
2052 return immediately).
2053 kes Modify Verify to obtain the previous JobId when it is actually
2054 running rather than at schedule time (as it was in 1.38.x).
2055 kes Fix src/job.c to handle MaxWaitTime correctly. This should
2057 kes When checking pid in pid file, continue running if the pid is
2058 the same as ours. This occurs on IRIX after a system crash.
2061 kes Extend new GUI API.
2062 kes Make the ua structure a class, and implement send_msg(),
2063 error_msg(), warning_msg(), and info_msg().
2065 kes Apply fix from for building wx-console on the Mac from
2067 kes Implement new select mechanism for GUI programs.
2068 kes Reorganize initialization of stackedWidgets in bat.
2070 kes Add updated nagios plugin supplied by Christian Masopust.
2072 kes More bat implementation.
2073 kes File migrate bug with Pool Occupancy using mediaid instead
2074 of jobids. Fixes bug #795.
2075 kes Fix orphaned buffers in filed backup and verify due to
2076 crypto buffers not freed during errors. Fixes bug #789.
2077 kes Extend new GUI api code to tree commands.
2078 kes Ensure that tree and dot commands check console ACLs.
2079 kes Permit marking directory with trailing slash.
2080 kes Allow 20 console connections (instead of only 10).
2082 kes Add smartctl call to bacula-sd.conf as an example of getting
2085 kes Modify jobq.c to let simultaneous restore jobs run. This may
2086 cause them to fail if they cannot get a drive.
2087 kes Add Client Connect Wait to Storage daemon to permit users to
2088 modify the time the SD waits for a FD connection.
2090 kes Correct virtual changer check which was backwards. This caused
2091 volumes to be unloaded into slots already occupied.
2093 kes Apply Command ACL filter to JobId list in restore command.
2094 kes Correct typeo in var.c patch.
2096 kes Don't let Bacula prune File or Job records for the current Job.
2097 kes Fix variable substitution pad + inc bug reported (with patch)
2100 kes Correct SQLite log table index as reported by Luca Berra.
2102 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
2104 kes Begin implementing new comm signals for API.
2105 kes Fix a few places in lib/message.c where the open fd may
2107 kes Continue implementing lib/bsock.c (real class). Make jcr,
2108 who, host, and port private. There are new methods to access
2109 them for non-class use. This required touching a number of files.
2111 kes Add LANG=C to autoconf/randpass so it works with languages other
2112 than English. Fixes bug #788.
2114 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
2116 You will not be able to generate Include/Exclude list any more.
2117 It will be fixed soon.
2118 If you want to use this, you can apply
2119 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
2121 kes Restore of sockets created false error messages because Bacula
2122 no longer restores sockets, but the code was still trying to
2123 set the attributes on a non-existent file. Reported by a user.
2124 ebl finish RecyclePool feature
2125 Media will takes Pool.RecyclePool
2126 when moving from Scratch to a Pool or when user will do
2127 update volume=xxx frompool
2128 To use it, add RecyclePool = aPool to your Pool resource
2131 RecyclePool = Scratch
2135 kes Expand new BSOCK class adding signal() and new BNET signals.
2136 kes Begin enhancing the dot commands adding a new API function
2137 that returns more information and will make it easier
2138 to interface to the Director from a program.
2140 kes Make DEVICE fd private. Its new name is m_fd, and can be
2141 obtained with dev->fd() outside the class. This is the
2142 first of many DEVICE members to be made private.
2143 kes Implement Michael Renner's idea on having a virtual disk
2144 changer. I made some minor modifications (e.g. I did not
2145 implement the Virtual Changer directive, but simply set
2146 the Changer Command to an empty string.
2148 kes Implement a BSOCK send() method that writes the whole record
2149 in a single write() request rather than in two.
2150 ebl add update volume=xxx recyclepool=yyyy
2151 volume takes recyclepool from pool when using update volume=xxx from pool
2153 kes Fix encryption deblocking bug, which caused some restored files
2154 to be truncated. This fixes bug #763.
2155 kes Add FD event sequence order prepared by Eric -- for RunScripts.
2156 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
2158 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
2159 ebl Use btime_t instead of uint64_t in media patch.
2161 kes Optimize the use of the database a bit in the Status dir command.
2162 Only open it when needed, ensure that if any previous database
2163 was opened, it is closed.
2165 kes Correct VolCatBytes bug from media patch.
2166 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
2167 in the case of orphaned records.
2168 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
2169 and File records in 300K chunks to be more efficient. This
2170 idea came from Juan Luis Frances (if I remember right).
2171 kes Apply Eric's scratch patch that moves a purged Volume to
2172 the RecyclePool. Question: how is RecyclePool set? what
2173 happens to the ScratchPool?
2174 kes Apply Eric's media patch that collects read/write media
2175 times as well as byte counts. This patch requires a
2176 simultaneous upgrade of the DIR and SD. Note, there
2177 should be some way to turn off timing. I'm not sure
2178 times are in Bacula units.
2179 kes Apply Eric's batch-insert patch.
2181 kes Update projects list.
2183 kes Implement Include/Exclude file lists in FD as dlists using
2184 the new dlistString class. This permits efficiently having
2185 large include/exclude lists and completes project Item 25.
2186 kes Fix dird/ua_cmds.c so that a cancel command checks if the
2187 console is authorized to cancel the job. This fixes bug
2189 kes Modify SD so that the VolCatJobs medium record is updated
2190 at the beginning of a Job rather than the end. This
2191 fixes bug #775 where exceeding MaxVolJobs caused jobs
2193 kes Added a mutex around getting and setting Volume information
2194 so that multiple simultaneous jobs will single thread.
2196 Switch to using Subversion
2197 kes Remove src/pygtk-console/ from configure
2199 kes Delete src/lib/btree.c from win32 build, then add rblist.c
2200 plus the entrypoints.
2201 kes Apply patch supplied that corrects debug print
2202 in canceling jobs for max run time. Supplied as
2203 part of bug #621, which was previously fixed.
2205 kes Test on job_canceled() and sd_msg_thread_done inside
2206 loop starting the message thread to avoid a race condition.
2208 kes Remove rl_catch_signal from console.c as it conflicted
2209 with the header definition. Fixes bug #765.
2210 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
2212 kes Clarify some stored/acquire messages to indicate if the
2213 problem is with read or append.
2215 kes Fix memory leak with storage ids in cats/sql_get.c
2216 kes Terminate watchdog earlier to avoid reference to released
2217 memory -- reported by Jason Austin.
2218 kes Move closing the database from jobq.c to the director daemon
2219 termination routine. This fixes memory leaks for shadow jobs
2220 (i.e. migration jobs).
2221 kes Free up the unique jobid chain items in migrate.c. This fixes
2222 a memory leak problem.
2223 kes Convert some ugly looking for statements to use foreach_alist
2224 in findlib/find.c. This will facilitate converting the structures
2225 to use dlist (for large include/exclude lists).
2226 kes Fix a bug in the btree.c and btree.h routines, then rename them
2227 rblist and add them to be built in src/lib. Include some new
2228 methods written by Rudolf Cejka that make the code more readable
2229 (hides some of the ugly casting).
2230 kes Add set_next() and set_prev() methods which make the code much more
2231 readable. Also add a new dlistString class that facilitates storing
2232 strings in dlists. To be used in the large include/exclude lists.
2233 kes Make some trivial modifications to lib/tree.h that use rblist
2234 rather than dlist for storing the tree links. This was suggested
2235 by Rudolf Cejka. The result of this is that the restore tree now
2236 uses red-black binary trees rather than simple linked lists. This
2237 should give rather dramatic speed improvements for directories
2238 contining large numbers of directories/files (more than 10000).
2240 kes Fix maxruntime bug #621.
2242 ebl Implement the include JobID in spool file name project.
2243 kes Reorder projects file in order determined by Jan 2007 vote.
2244 kes Implement item #12 on project list -- quick release of FD by
2246 kes Fix open of SQLite3 db where user does not have write permission
2247 so that DIR does not crash. Fixes bug #761.
2249 kes Add back missing @ in Win32 Makefile.
2250 kes Change 'Device not configured to autolabel' from INFO
2252 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
2253 which should restart an indefinite # of times.
2254 kes Fix configure --help to print --with-mysql[=DIR]. Same for
2255 other DIR specifications.
2257 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
2258 Fix path quoting in SQLite scripts.
2259 Fix problems with SHGetFolderPath.
2261 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
2263 kes Fix Job restart on error bug that promotes an Inc to a Full
2264 backup. This should fix bug #755.
2265 kes Add qt-console and first cut of code.
2269 kes Fix Bacula->Documentation link on Win32 to point to index.html
2270 instead of bacula.html. Fixed bug #750.
2271 kes Return JobId in db_get_job_record() when JobId==0. This should
2273 kes Do not release source pointers when restarting a failed job.
2275 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
2276 This *should* fix bug #747.
2277 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
2280 kes Modify USTORE constructor to set an empty store_source string,
2281 and don't copy the store_source string in a cancel. Hopefully
2282 this will fix Arno's seg fault, bug #744.
2283 kes Add back code to disable conio in configure. Fixes bug #743.
2284 kes Correct the Options scanner in the FD to correctly handle
2285 SHA1 option, which was eating the next option. Reported by
2287 kes Add code to indicate when the SD is spooling, spool wait, and
2288 despooling as requested by Alan Brown.
2290 Version 2.0.0 released: 4 January 2007
projects / bacula / bacula / blob