1 Technical notes on version 2.5
9 Multiple command/console per runscript
10 console command in runscript
13 State file updated on job term
16 Duplicate Job directives
20 Improved status commands for Bat
21 Spooling/despooling status
22 Implement ftruncate for NFS devices
23 Add long term statistics job table
29 kes Eliminate ints from conf files and structures to avoid
30 word alignment problems
32 kes Fix bug reported by Scott Barninger where the bacula script
33 refers to scripts in the wrong directory. Needed to meet the
34 requirements of recent FHS location changes.
35 ebl Disable vtape for FreeBSD.
37 ebl Modify disk-changer to check if slot contains something before
40 ebl Fix vtape on win32 and debian.
41 ebl Fix autoselect patch (cause segfault).
43 ebl Fix autoselect option broken for a while. Fix #1089. Need some
44 work with StorageId to be able to use a particular drive in a
47 ebl Rename faketape to vtape.
48 ebl Update faketape driver.
50 ebl Modify faketape driver to avoid sparse file.
51 kes Add make clean of qt-source directory during ./configure
52 kes Store last block number written to tape in DEVICE and
53 use it for testing for correct last block on EOT.
55 Release Version 2.4.0:
59 kes Make sure to clear JS_WaitMedia when operator mounts a Volume.
62 kes Add create_postgresql_database.sql to Win32 installer. Should
63 fix problem reported by Juilio Monteiro.
64 kes Get correct slot when auto unloading a device. This fixes bug
67 kes Fix multiple media restore.
68 kes Make DEVICE Slot private and access it via a method.
69 Allows better control over when it is set and cleared.
70 kes Fix possible seg fault if SQL error.
72 kes Add Martin's fixes to argument scanning for the estimate
73 command. This fixes bug #1093.
74 kes Add debug code to SD.
75 kes Fix renaming a Volume, which used the wrong Volume name.
77 kes If operator has rewind tape, print warning, release tape and
78 try once more. If tape is positioned somewhere, something went
79 wrong, so mark the tape in error and try once more. Previously
80 this error was fatal, now it produces an error message.
81 kes Ensure correct volume name displayed during restore
82 kes Ensure that Volume is mounted for restore.
84 kes Fix a few more Coverity reported problems.
86 kes Apply Allan Black's status dir job count patch.
87 ebl Add information about IMPORT/EXPORT slots in mtx-script.
88 kes Enhance a couple of SD debug messages.
89 kes Tweak unload flag setting and ensure it is set during swap.
91 ebl Fix #1091 about bad output in estimate command.
93 kes Modify autochanger locking to attempt to avoid race
95 kes Make sure device not busy before doing label command.
96 kes Display open() errors except when polling. Previously too
97 many were suppressed. This should fix bug #1070.
98 kes Fix Win32 reparse points. Bacula will not recurse into any
99 reparse point directory, including mount points, unless the
100 directory is explicitly mentioned at the top level (same as
101 with Unix). A file that is linked to another file will be
102 backed up -- much as Unix does for hardlinked files.
103 This fixes bug #1041.
105 kes Remove double quotes from ChangeLog and ReleaseNotes
106 kes Remove StorageId test when pruning and recycling (Eric's changes).
107 kes Remove old form of locking when getting volumes -- causes deadlock.
108 kes Change bat dirstat layoutWidget to dirstatlayoutWidget to make
109 the name unique and to eliminate compile time error.
110 kes Add accurate.o to Win32 FD Makefile
112 kes Fix cats dll build on Win32 after db_update_job_end_record
113 calling sequence change.
114 ebl Switch to tokyo dbm instead of htable in accurate code
115 ebl Include tokyo dbm to bacula source tree
117 kes Fix buffer overruns detected by Coverity.
119 kes Tweak joblog display.
121 kes Implement --without-qwt
122 kes Fix layout of restore tree dialog
123 kes Add configure bat QWT libraries, so that bat can be built
124 with or without the QWT libaries.
126 ebl Add dummy tape driver for regression tests.
127 kes Make sure we unload the right slot when swapping.
129 kes Add debug times, reduce size of two-pool-changer test
131 ebl Tweak autoconf scripts for faketape
133 kes Improve SD reserve debug code.
134 kes Testing an improvement to free up volumes no longer in use.
136 kes Rework SD acquire for read to handle autochanger Volume
138 kes Implement regression that explicitly tests swapping a Volume
139 from one drive to another.
140 kes Enhance disk-changer to detect most error conditions.
141 kes Fix SD code so that it properly swaps a Volume between drives.
142 This fixes bug #1083.
144 kes Apply libdbi patch from Joao Freitas for regress and for
145 Bacula trunk. Regress now works with libdbi. Nice.
146 kes Apply .nobackup patch from bug #1077 submitted by
148 kes Apply Bastian Friedrich's patch that adds %p to edit the pool
149 name into jobs cloned via the run directive.
151 kes Prevent a Volume that is being swapped from being freed from
152 the volume list. This will most likely fix, at least partially,
154 kes Fix strippath so that it does not get a buffer overrun and crash FD.
155 This fixes bug #1078.
156 kes Remove 50 millisec wait in SD that broke debugger.
157 ebl Add MaxRunSchedTime option that specifies the maximum allowed time
158 that a job may run, counted from when the job was scheduled.
159 ebl Fix MaxWaitTime option that specifies the maximum allowed time that
160 a job may block waiting for a resource, counted from when the job starts
161 ebl Rename (add) Max(Incr|Diff|Full)WaitTime to Max(Incr|Diff|Full)RunTime
162 kes Apply patch from bug #1076 by Tullio Andreatta <t.andreatta@troppoavanti.it>
163 that implements multiple commands per line in the console when using
164 readline. Modify the default to use a semicolon as the command separator.
166 ebl Fix SQL query in migration code.
167 ebl Make accurate mode with hash disk pass regression tests
169 ebl Implement first cut of accurate backup with hash disk.
171 kes Force unload of volume when wrong volume mounted in SD.
173 kes Fix bat seg fault at termination.
174 kes Add Bacula generated version to bat about box.
177 kes Experiment with allowing multiple read jobs.
178 kes Move final volume swapping code to DCR method and
179 call it from acquire_for_read().
180 kes When wrong volume is mounted during read, unload_autochanger.
182 kes Integrate the libdbi changes from Joao Henrique Freitas
184 kes Stop searching for Volumes in SD askdir if DIR returns the
185 same volume name twice in a row.
186 kes Close bat console windows first to eliminate error message
189 kes Tweak the swap Volume from one drive to another code so that
190 it now seems to work.
191 kes Resolve several problems with recycling that broke the new
192 code (these problems are in 2.2.9 as well).
193 kes Remove the volume lock when calling the sysop code.
194 kes Don't mark a reserved volume with no writers as unused otherwise
197 kes Rework class structures for VOLRES, DCR, and DEVICE to make
198 the method names a bit more logical, and for more logically
199 handling the responsibilities.
201 kes Remove redundant code in terminating the scheduler that just
202 causes a seg fault in many cases.
203 kes Cleanup releasing a volume and make it a DCR method.
204 kes Improve algorithm for detecting pre-reserved volume and
207 kes Tweak volume swapping code so it works.
208 kes Correct name overloading in mount.c
209 kes Replace released flag in VOLRES with reserved and add access
210 methods for the VOLRES class.
211 kes Prevent volume from being released while being swapped.
212 kes Apply Bastian Friedrich's edit codes patch for the bpipe-fd
214 kes Apply Bastial Friedrich's edit pool=%p patch for run clone
216 kes Refactor parts of stored/mount.c
218 ebl Add sanity checks for VolWriteTime and VolReadTime
219 ebl Take care of bad clock changes while computing VolWriteTime
220 and VolReadTime. This should fix or limit #1066
221 kes Correct error string numbers in dird/catreq.c
222 kes Restructure reserving, acquiring, and mounting volumes. Calls to
223 autochanger are deferred for mount.c -- simplifes the code.
225 kes Do not prune any running job. It just fails the job.
226 kes Lock the volumes when changing dev->reserved_device and marking
227 the volume unused otherwise the device can get reserved by
228 another job before the volume is released, thus blocking it.
230 kes Correctly detect Ubuntu systems, and add ubuntu platform directory.
231 kes Fix bug #1063, reuse of freed ptr in list nextvol.
232 kes Release regex compile buffer in filed/job.c
233 kes Add proper type of const char in sql_create.c
234 kes Turn off debug in daemon termination routines
235 kes Move free_volume_list() before devices are freed in stored.c
236 kes Fix reference to uninitalized stack variables in bregex.c.
237 This should correct bug #1067.
239 kes Fix possible seg fault in SD when freeing a volume entry.
241 kes Implement unload_dev() before swap device.
242 ebl Add statistics prunning with option and menu
243 kes Separate unload_dev() from unload_other_device() in autochanger.c
245 kes Apply patch from bug #1069 that corrects spurious error messages
246 when ACLs enabled on SGI but no ACL exists.
247 ebl Fix small segfault in bacula-sd when debug level is 500
248 kes Modify run_program() and run_program_full_output() to use
249 call by reference for the results string. This corrects a long
250 standing problem where the address of the string may be changed
251 in the subroutine but not in the calling program.
253 kes Re-enable code to remember last volume mounted on a non-tape
255 kes Add patch supplied in bug #1068 that fixes a SD crash when using
256 a Virtual autochanger.
257 kes Generate correct JobMedia records during spooling/despooling when
258 running concurrent jobs. Thanks to Tom Ivar Helbekkmo
259 <tih@hamartun.priv.no> for excellent analysis and testing.
261 kes Tweak hash algorithm for htable using Martin Simmons idea
262 for doing a circular shift.
263 kes Remember what volume is in VTLs (previously turned off for
265 kes Analysis of JobMedia records by Tom Ivar Helbekkmo <tih@hamartun.priv.no>
266 pointed out some problems in creating JobMedia records during
267 spooling with concurrent jobs. Fix the problem by updating the
268 start file position before despooling and generate a jobmedia
269 record at the end of despooling.
271 kes Fix handling of JobMedia records during spooling and when a
272 Volume is changed without actually writing data to the Volume.
274 kes Rework certain SD locking based on gdb tracebacks of deadlocks
275 sent by Eric. This code now uses only the volume_lock() rather
276 than the reservations lock when at EOM and acquiring a new
278 kes Ensure only one exit point in several subroutines.
280 kes Implement bsock code to permit locking. Use the new code in Verify
281 in the FD to prevent the heartbeat thread from disrupting the Verify
282 data sent to the Dir.
283 kes Modify SD locking to eliminate locking the reservations system from
284 outside the system. Use the volume lock when getting media data
285 and reserving a new volume at end of media.
286 kes Add Eric's volume_unused() fix to stored.c so that Volumes found
287 when SD starts are not locked into place.
289 kes Fix error compiling runscript code on 64 bit machines.
290 kes Tweak Win32 mount point code.
291 kes Fix a couple of bugs in the accurate code (bad sscanf, buffer not
292 cleared giving bad file estimate).
293 kes Implement BIG_MALLOC in htable code. Runs 2.5 times faster for
296 kes Keep Schedule run lists in order as suggested by
299 kes Implement autostart scripts for Debian.
300 ebl Implement upgrade catalog scripts.
302 ebl Apply jobstat patch for long term statistics. Have to implement
303 purge stats command and upgrade scripts.
304 kes Fix mtx-changer.in for broken Debian mt program.
306 kes Fix large number of JobMedia records reported by Eric Bollengier.
308 kes Apply doc fix from bug #1062.
309 kes Resolve crash and improper restore wx-console Win32 restore
310 GUI. Fixes bug #1065.
311 kes Update Win32 wxWidgets to latest version.
312 kes Attempt to do correct handling of Win32 mount points. Should
314 kes Fix Win32 FD backup/restore memory leak due to improper termination
315 of BackupRead/Write. This fixes bug# 1038.
317 ebl Reduce memory usage for accurate backup, working only with ctime
318 and mtime. (not all Lstat field)
319 About 40MB for my linux system (400.000 files)
321 kes Add dcr->reserved_volume flag that allows us to release a volume
322 even if it is not vol->released. This allows maxvol2 to work when
323 Volumes expire and we are already writing to the device (i.e. a
324 volume is pulled out from under us by another job terminating after
325 we reserve the drive).
327 ebl Permit multiple command/console per runscript definition.
328 RunScript { command = /bin/true ; command = /bin/false ... }
329 ebl Add RunsWhen = AfterVSS to runscript. You can execute a command
330 (restart an application) just after the VSS snapshot on windows.
331 kes Don't zap dcr values during release_volume() as they might
332 have the next Volume to be mounted.
333 kes Fix AIX prototype.
335 kes Second cut of drive switching during backup.
338 kes Update Win32 version of wxWidgets to most recent version.
339 kes Tweak Copy job details.
340 kes Rework dir_find_next_appendable_volume to make a bit more effort
341 to find a suitable volume before giving up.
343 kes Make ask_sysop_to_create... to return if waken from wait.
344 This helps get out of blocked conditions.
345 kes Experimental implementation of switch_device in reservations.
346 kes Implement FD version to allow easier protocol changes.
347 kes Add Plugin Options string -- not yet passed to FD.
348 kes Implement PluginOptions ACL.
350 kes Attempt to correct problems with restores with autochangers and
351 use counts going negative
352 kes Rework SD status command and implement API for bat. Implements
353 header, runing waitreservation, devices, volumes, spooling,
354 and terminated status keywords.
355 .status storage=xxx <keyword>
356 kes Clarify TLS error message by adding double quotes around name.
357 kes Simplify SD/FD status code by putting api flag in STATUS_PKT
358 kes Pass jcr to tls routines so debug messages can be handled better.
359 kes Rework jobq resource allocation code, and possibly fix a bug
360 that caused reference counts to get out of sync.
362 kes Rename fd/dir plugin to use Bacula standard underscore.
363 kes Plugin work -- bring dir up to fd level.
364 kes Start implementation of VTL code
365 kes Fix Win32 build after adding new cats subroutine.
367 kes First cut at Duplicate Job implementation.
369 kes Fix bugs in MaxFullInterval and Implement MaxDiffInterval.
370 kes Start PluginOptions string, and refactor a bit of ua_run.c
371 ebl Apply Allan patch that permit to reset recyclepool.
373 kes Test patch -- possible fix or improvement for bug #1053
374 kes Refactor FD and SD status commands to permit new API code in
375 SD, and to fix Win32 build.
376 kes Win32 build is now working.
378 kes Implement 'MaxFullInterval' and start 'MaxDiffInterval' based on
379 some ideas in patch from Scott Bailey.
380 kes Begin implementation of duplicate Job control.
381 kes Fix some of Win32 build after recent additions.
382 kes Apply patch from Frank Kardel that implements 'honor no dump flag',
383 which causes the FD to detect whether or not the OS has the
384 honor no dump bit (*BSD systems), and if so, to skip backing up
385 any file with this bit set. The feature is enabled by setting
386 'honor no dump flag = yes' in the Options section of a FileSet.
388 kes Correct po warning message with datarootdir
389 kes Implement more code in dird.c to put configuration parsing in
390 a class rather than use globals.
391 kes Restructure SD status command for implementation of bat API
394 kes Suppress incorrect 'Will not descend from x into y' messages.
395 kes Eliminate FORTIFY_CODE=2 bug, and make first cut at removing
396 daemon globals used by parser.
397 kes Apply Joao's patch to separate DB_TYPE and DB_PROG in configure.
399 kes Fix free of plugin_list when none exists.
401 ebl Apply accurate project patch.
403 ebl Fix a segfault when using strip_path option. (Use of pm_strcpy
404 on non-mempool object)
405 kes First cut of converting FD .status to work with bat API.
407 .status client=XXX header
408 .status client=XXX running
409 .status client=XXX terminated
410 kes Implement first cut of Copy Job.
411 kes Implement Catalog in Pool resource. It overrides catalog specified
412 in the Client resource.
414 kes Apply patch (with some difficulties) from Joao Henrique Freitas
415 <joaohf@gmail.com>, which adds support for libdbi as a Bacula
417 kes Add patch from Martin Schmid scm@apsag.com that checks to see if
418 ftruncate() actually works. In the case of some (cheap) NAS devices,
419 it does not, and so recycling NAS Volumes does not work. The code
420 simply unlink()s the file, then recreates it. This fixes bug #1011.
422 kes First incomplete cut of big malloc blocks for htable.
423 kes Tweak plugin code.
425 kes Plugin debug code + tweak a couple bat dialog layouts
427 kes Fix creating first JobMedia record during Migration to include
428 proper index. This caused slow restores of migrated jobs.
429 kes Temp fix to plugin name file_index.
430 kes Bacula backed up and restored a MySQL database.
432 kes Implement plugin restore.
433 kes Implement parsing of db_driver to give db_type index.
435 kes First cut of plugin restore code.
436 kes Fix bug #1047, which had a heap overrun when stripping certain paths,
437 and do not strip paths on symbolic links.
438 kes Set catalog backup database and user name from values specified on
439 the ./configure line.
440 ebl Fix #1031 about wrong pool source information in job report.
443 kes Remove a redundant jcr argument to find_files, match_files, and
445 kes Implement '.status dir header|scheduled|running|terminated' that
446 prints the requested status section. With the exception of the
447 header, the other reports have fields separated by tabs (\t).
449 kes Apply patch from Peter Much <pmc@citylink.dinoex.sub.org> that fixes
450 a resource embedded run command to find a since time if no explicit
451 since time was supplied on the command line.
452 kes Apply state-file.patch sent by Allan Black <Allan.Black@btconnect.com>
453 that updates the state file at job termination time in addition to
454 when the daemon terminates.
456 kes First version where a plugin did a backup.
457 bpipe-fd.so created a backup file, wrote a test
458 string to it, and Bacua could restore this fabricated file.
460 kes Implement DB Driver = string for the DBI driver.
461 kes Remove all old bdb_xxx.c code. Add dummy routines to bdb.c
462 kes First cut of code for loading Win32 plugin dlls. Implement
463 dlopen, dlsym, dlclose, and dlerror in src/win32/compat/compat.cpp
464 and implement a dlfcn.h file based on opengroup's definitions of
467 kes First cut plugin directives.
469 kes Apply patch from bug #1049 to prevent stripping the path on a
471 kes Attempt to fix bug #1047 where stripping a path corrupts the
472 heap. Waiting for feedback.
473 kes Correct the Mount message not to suggest labeling a new tape
474 when doing a restore. Submitted by email by John Stoffel.
475 kes Attempt to work around gcc FORTIFY_SOURCE bug that crashes the
476 FD by using casting. Reported in bug #1042.
478 kes A bit of crypto cleanup. More later.
480 Release Version 2.2.8
482 kes Apply patch from Martin to correct bug #1040, bscan sets existing
484 kes Fixed important spelling error in doc -- bug #1045.
486 ebl Fix bextract to be able to extract non-portable Win32 data to
488 kes Move initialization of read/write res lock earlier in the code.
489 This fixes the crash with a null conf file. This fixes bug
491 kes Redefine CURES in lib/parse_conf to be URES and move it all
492 into lib/parse_conf.c -- this responds to bug #1042, but does
493 not fix it. The fix is not to compile with FORTIFY_SOURCE.
494 kes Backport to 2.2.8 fix de-referencing a NULL pointer in the scanner from
495 the trunk SVN. I don't think this was reported as a bug.
497 ebl Fix a bug during tape initialization with MTSETDRVBUFFER.
499 kes Fix Win32 build with new .def files and DLL_IMP_EXP ...
501 kes Add DataDespooling and DataCommitting status (committing is
502 the last despooling).
503 kes Finish implementation of new reservations code noted below.
505 kes Fix bsnprintf for float point numbers. I broke recently when
506 parameterizing some variables. This fixes bug #1036.
507 kes Undo recent reservations changes ... will apply them later
508 when they work better.
510 ebl Fixes #1034 which cause mysql to hang the connection after 8h
511 ebl Change default statistics target of filename.name and path.path
512 fields for PostgreSQL. This speeds lookup by indexes. Thanks
514 kes A few more tweaks to new reservation code. Make sure to clear
515 vol released flag when retaking volume. When reading label and
516 label is bad mark volume unused. When recycling, mark volume
517 unused so it can be renamed.
519 kes Fix reserve_volume() so it doesn't release a volume in use
520 (i.e. a volume entry not marked released). This should be
521 the last part needed to fix bug #1018.
523 kes Move Heartbeat documentation from Job to Director resource.
524 This fixes bug #1033.
526 kes Fix existing switch drive SD code to call autochanger to release
527 any old volume. This must be done to keep the autochanger from
528 releasing subsequently newly reserved volumes in doing a close().
529 This should fix bug #1018.
530 kes Fail if attempting to get console input in batch mode. This
531 should help fail RunScript console commands that are incomplete.
532 kes First cut implementing switch_drive() in SD (not actually called).
534 kes Implement first cut running console commands in a RunScript.
536 ebl Fixes bug #1028 where 'Selection Type' option was not usable
538 ebl Fixes bug #897 and bug #1005 where bacula doesn't display runscript
541 Release Version 2.2.7
543 kes Add new free_tls() entry point so that Win32 builds.
544 kes Fix compile warning in src/lib/util.c
545 kes Fix entry point for edit_job_codes() so that Win32 builds.
546 kes Fix seg fault Frank Sweetser reports in regression testing
547 on his systems. The problem was that the original author of
548 bsnprintf.c did not take into account the side effects of
549 using ++x in the argument to a #define.
550 kes Make SD protocol backward compatible with version 2.2.x.
552 ebl Fixes bug #1015 where bacula failed to restore acl to a socket
553 because Bacula no longer restores sockets.
554 ebl Always use ignorecase fileset option on win32 FD.
556 kes Apply patch from Michael Stapelberg <michael@stapelberg.de>
557 that implements double quoting include names in conf files,
558 and also allows piping input by having the first character
559 be a vertical bar (|).
560 kes Apply patch from Bastian Friedrich <bastian.friedrich@collax.com>
561 that implement %f in RunScripts to pass the FileSet name.
562 kes Skip leading | when lex input comes from a pipe as suggested
563 by Michael Stapelberg <michael@stapelberg.de>.
565 kes Apply patch for bsmtp Win32 daylight savings time fix supplied by
566 Nerijus Baliunas <nerijus@users.sourceforge.net>
568 kes Implement Plugin Directory and plugin events.
570 kes Implement a security enhancement: TLS authentication but no
571 encryption. Enabled by setting 'TLS Authentication = yes'.
572 Note when this is on, TLS encryption is turned OFF!
574 kes This patch corrects a problem where the maximum concurrent storage
575 jobs counter gets out of sync during restore jobs causing jobs to
576 'wait on max Storage jobs'. This patch fixes bug #1009.
578 kes This patch fixes bcopy so that it produces correct Volumes.
580 kes This patch eliminates spurious output to the console during a VerifyVolume
581 job that contains encrypted data. It fixes bug #1024.
583 kes This patch prevents the 'status dir' command from trying to use a scratch
584 volume and possibly moving it from one pool to another. This patch fixes
587 kes Add new include to postgresql.c suggested by Marc Cousins so
588 that it compiles correctly with pgre version 8.3.
590 kes Fix --archivedir addition to configure. Replace it with
591 --with-archivedir in configure.in This fixes the regression
593 kes This patch fixes bug #1012 where the job is canceled because
594 of Max Run Time exceeded when the job has not yet started.
596 ebl Apply Richard Mortimer patch that fixes #1016 when there are more than
597 one 'part' to write. Instead of each part being stored on disk,
598 written to DVD, then deleted from disk, all parts are written to disk,
599 and only the last is written and deleted from disk.
600 kes This patch fixes the status command to include the formating string for
601 JS_AttrInsterting. It fixes bug #1021.
602 kes This patch should fix the Mac OS X build problem on the latest
603 Darwin, where sys/types.h was not included correctly (apparently
604 due to a change in the Mac headers). The solution was to explicitly
605 ensure that it is defined for the ./configure.
606 This patch also has a rebuild of configure that includes the Debian
607 qt4 patch to check for qmake-qt4. This patch fixes bug #1020.
608 kes This patch should ensure that queued messages to the console are
609 displayed as soon as possible. It should fix bug 1007, but has been
610 reported not to work.
612 kes This patch fixes the infinite loop when trying to increase the
613 maximum number of volumes in a Pool during the add command.
614 This patch fixes bug #1008.
616 Release Version 2.2.6
618 db Remove extra data on estimate command in joblist for bat.
620 kes Cleanup of code in SD that sets the LastWritten date. This doesn't
621 really change anything, but is the beginning of doing it *right*.
622 To do it completely right the LastWritten date must be passed to
623 the SD, but it is not yet done.
624 kes Minor tweaks to some bat restore SQL.
625 kes This patch fixes bug #1003 where putting the message output from
626 a Verify job into the catalog results in a recursive loop. The problem
627 seems to show up only with postgresql (to be verified).
628 kes Correct %x to %p in postgresql debug statement.
630 kes Fix bug #942 where lots of emails where generated when the heartbeat
631 interval was low and Bacula wanted a different tape from the one in
634 ebl Add new SD despooling attributes and Dir inserting attributes
635 job status codes in the catalog (Status table).
637 ebl Use qmake-qt4 instead of qmake when available (debian system).
639 kes Add a security warning to src/cats/make_catalog_backup.in indicating
640 that passing the password via the command line (arg 3) is insecure.
641 This responds to bug #990 (it doesn't fix it).
643 kes Set default debug_level to zero. This corrects bugs #991 and #993.
644 kes Fix a crash in bat when it cannot connect to the Director for example
645 if the Director is not running.
646 kes Remove redundant INDEX (JobId) from File table in the trunk.
648 kes Make explicit exception to GPL in LICENSE to permit linking
649 the Win32 FD with Microsoft VSS code.
650 kes Apply the Solaris package patch from
651 Masopust, Christian <christian.masopust@siemens.com>
652 kes Apply the patch to optionally add a timestamp in the debug output
653 submitted by Mariusz Czulada <manieq@wp.eu>.
655 ebl Use PQerrorMessage instead of PQresultErrorMessage in postgresql
656 backend (sql_strerror). Fixes bug #989
658 kes Apply Michael Short's <mdshort@gmail.com> Win32 regress patch.
659 It applied with no problems.
660 kes Add PATH command to SunOS part of mtx-changer.in so that sed and
662 kes Redirect stderror to stdin on mt status command in mtx-changer.in
663 since the status is returned on stderr on Solaris.
664 kes Activate Close button on tray-monitor window. This fixes
666 kes Check for NULL item in parse_conf.c before calling it. In the
667 case of Device, there is no item and this caused a seg fault when
668 Device appears in the conf file.
669 kes Add a #define __CONFIG_H when including config.h in bacula.h. This
670 avoids pulling in config.h multiple times in some new code.
672 kes Fix spurious warning message printed when creating a volume with
673 a LabelFormat. This fixes bug #976.
675 Release Version 2.2.5
677 kes Add JobId in place of Job name in all the Jmsg() output.
678 kes Correct the APP_DESC for the Win32 storage service (remove an e).
680 kes Make maxvol-test and new more strict maxvol2-test work.
681 kes Print JobId in all Jmsg() job output.
683 kes Add new SD despooling attributes and Dir inserting attributes
684 job status codes. This fixes bug 961.
685 kes Fix Win32 drive display in bat version browser. Fixes bug #962.
687 kes Fix doc issue. This fixes bug #963.
688 kes Fix listing performance problems in bat. Pointed out by
690 kes Remove old debug code.
691 kes Fix bat code that tests for Win32. This should fix bug #968
692 kes Query 5 list wrong Vol after migration. This fixes bug #960
694 ebl Fix #969 where user can't change Replace option in restore menu.
696 kes Save jcr in thread specific data (tsd) for each thread.
697 kes Make Dmsg() print JobId as -%u.
698 kes Make Jmsg, Emsg, and others automatically pickup the jobid
699 for the thread if it exists.
700 kes Remove old reservation debug jid code.
701 kes Remove get_jcr_from_tid() from OpenSSL and tls code.
702 ebl Add an option that permit to specify spool size in job
703 definition. (Applying patches/testing/spoolsize_per_job.patch).
704 You must upgrade SD and DIR at the same time.
705 dvl Add new configuration item --archivedir
706 dvl Adjust regression tests to use tmp not /tmp. This will allow
707 multiple concurrent runs of the regression tests.
709 kes Fix race condition that drops final block written to volume.
710 This happens in rare cases with multiple simultaneous jobs
711 when the Volume fills. This fixes bug #964. May be related
712 to bug #935 and possibly #903.
713 kes Eliminate more strerror() and replace with bstrerror().
714 kes Remove BSD getopt and replace with unrestricted IBM version.
715 kes Fix Win32 build for changed calling sequences.
716 kes More tweaks to the mount volume routines to get everything
717 right. Changed variable name from find to have_vol, which is
718 much easier to understand.
719 kes Enhance btimer debug code.
721 kes Fix FD->SD authorization failure, which was due to spurious
722 wakeups from a pthread_cond_timedwait(). Simply check the
723 predicate before continuing. This fixes bug #953.
724 kes Add const char where needed (more to do). Remove temp debug code.
726 kes Setup SQLite busy handler before doing queries. Fixes bug #967.
727 kes Don't overwrite error message in check_tables_version.
729 kes Unlock batch insert tables with same calls used elsewhere.
730 kes Allow starting 59 jobs a second.
731 kes Make SD session key more random.
732 kes Add retry for SQLite opening db if it fails. Probably helps
734 kes Suppress extra error messages during batch insert failure.
736 kes Add jcr to timer packets so if killed message can be sent to job.
737 kes Add JobId to all Dmsg() output.
738 kes Put some FD auth code on dbglvl rather than fixed.
739 kes Return insert attributes error message in db msg buffer to avoid
740 false error messages. Helps fix bug #966.
741 kes Separate batch init error messages. Probably helps fix bug #966.
742 kes Make SD code that contructs attribute insert check string lengths
744 kes If Dir gets an error during inserting attributes, cancel SD.
745 This reduces unnecessary error messages.
747 kes Correct search boolean for getting Volume info
748 ebl Cleanup batch insert code. Probably fixes bug #965.
749 kes Back out one small change to the reservation system (reserving a volume).
750 kes Rework how a Volume is mounted. It is now much more intelligent and
751 will always attempt to use any mounted volume if possible and reduces
752 calls to the Director asking about volumes.
754 kes Turn off some code when batch insert not enabled.
755 kes Edit FD name in connect error messages.
756 kes Rework the reservation system to take into account that the Director
757 might give us a Volume that is different from the current one being
758 used, and to ensure that we don't exceed Maximum Volume Jobs.
759 This fixes (mostly) bug #947 ' Maximum Volume Jobs = 1 produces
760 fatal error with multiple jobs running'
761 kes Add more debug code in reservation system.
762 kes Implement maxvol-test to check bug #947.
764 kes Add code to handle tray monitor separated from Win32 FD.
765 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
767 kes Add missed return in fixing verify bug -- trunk only.
768 ebl Fix a command parser issue causing a director segfault.
769 kes Fix ANSI tape labeling. Fix restoring ANSI labeled Volumes.
771 kes Increase the max block size to 4MB fixes bug #957.
772 kes ERABT if user sets min block size > max block size. Fixes bug #956.
773 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
774 is not properly mounted (recognized) during a poll.
775 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
776 Job that has differences reports Verify OK.
777 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
779 ebl Add an option to operate on all pools with update vol parameters.
780 This complete the project 20. Patch from Nigel Stepp.
781 ebl Add history support to bconsole when using readline.
782 Using Ctrl-D to exit doesn't update .bconsole_history
783 kes Modify new volume algorithm to use max MediaId for generating next
784 volume number rather than the count of Volumes. This should essentially
785 eliminate the failure rate if some volumes were deleted. Bug #921.
786 kes Begin implemention of Optimize Job Scheduling.
787 kes Implement restore callback that Dirk and I agreed on for bat
788 restore. This fixes bug #928. Restore of backup of zero files fails.
789 kes Fix SQL Catalog logging which broke with new db_escape_string
792 Release Version 2.2.4
794 kes Fix bacula_cats.def for new db_escape_string().
795 kes Increase size of name string when FD making connection to SD.
796 May fix bug #953. FD->SD connection failure.
798 kes Add code to help Dan debug 2drive-incremental-2disk test.
799 kes Add code to try to fix bug #908.
800 kes Add waits to multiple exit detection code to try to force pid
801 file to always be deleted.
802 kes Restore good dev.tar.gz to rescue set appropriate binary property.
804 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
805 trying to switch drives by checking for blocking before unblocking.
807 kes Cancel storage daemon in all cases where FD reports error. This
808 should fix virtually all cases of bug #920.
809 kes Fix db_escape_string() for MySQL which did not compile.
811 kes Fix error message that was clobbered when Dir tells SD it does not
812 have write permission on Volume. This should fix a minor point
813 in bug #942, but not the main problem.
814 kes Add code to cancel job in SD if FD connection fails. This should
816 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
817 dvl Pass jcr and db into db_escape_string() to enable better escaping
819 kes Fix migration code to get correct Volume name with multiple volumes
820 by skipping |. Fixes bug #936.
821 kes Implement patch supplied by Landon to fix bug #944 where using
822 TLS with bconsole uses 99+% of the CPU.
823 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
825 kes Move patches into patches directory.
827 ebl Fix bug #946 about 'bacula-dir -t' which doesn't works
830 ebl Using 'm' in bconsole will show messages like before,
831 and not memory usage.
832 kes Fix bug #935, and probably also bug #903 where files were not
833 restored. MediaId was not properly set in JobMedia record after
836 kes Suppress chown and chmod error messages if the FD is not running
839 kes Apply Martin Simmons' patch that should turn off the new API usage
840 when batch insert is turned off allowing building on older
842 kes Add ./configure search in qwt-qt4 for qwt package
844 kes Bacula is now free of 3rd party GPL copyrighted code!
846 kes Add guid_to_name.c/h which replace idcache.
847 kes Remove enh_fnmatch.c. Make code that references it use fnmatch.c
849 ebl Detect if new PosgreSQL batch insert API is present.
850 kes Correct incorrect mempool call causing Director crash. Occurs on
851 systems without va_copy().
852 sb Update spec files for 2.2.1 release
854 kes Fix memory pool call in ua_output.c. bug #934.
855 kes Replace fnmatch.c and fnmatch.h by modified BSD versions.
856 Add test program to fnmatch.c
858 kes Integrate patch to README.vc8 from
859 Hederer Jean-Sébastien <hedererjs@asperience.fr, had to manually
860 edit it to get it into Unix patch format.
861 kes Implement mkpath.c to replace old FSF makepath.c
863 kes Implement savecwd.h and savecwd.c. Remove FSF versions.
865 Release Version 2.2.1
867 kes Update POTFILES.in
868 kes Cleanup a few underquoted AC_DEFUNs in configure
869 kes Apply patch from Martin Simmons that adds a test for va_copy to
872 kes Fix bug #921 by increasing the number of tries to create a new volume
874 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
875 can be called multiple times. Implement a version for machines
876 without va_copy() that gets a big buffer.
878 kes Integrate more portable zone offset code into bsmtp.c
879 Submitted by Attila Fülöp.
881 kes Fix bad SD->FD return status reported by
882 (James Harper) <james.harper@bendigoit.com.au>
883 ebl Fix a bug in read_close_session which return random status
884 thanks to James Harper
886 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
887 and directory names during restore of single file/directories.
888 kes Add sanity checks to .sql command when string is empty. Hopefully
889 that will resolve Dirks Director crash.
891 kes Apply patch submitted by Martin Simmons that corrects a seg fault
892 in the bsmtp chat subroutine when debug is >= 10.
894 kes Fix Director crash when running bat SQL queries.
895 kes Add David's notes on Item 8: Copy pools.
897 kes Rework projects file to be current and ready for a vote.
898 kes Enhance lex scanner error message.
900 kes Tweak LICENSE file to mention BSD code.
901 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
902 if specified on the ./configure.
903 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
904 This class is intended to allow us to open a second bsock to the
905 Director while in the restore subdialog.
907 kes Fix configure to create bat Makefile before creating dependencies.
908 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
909 kes Add a tooltip to the tray monitor.
910 dvl Set the Director's PID file before dropping privs. This fixes
913 kes Update AUTHORs file
914 kes Increase the default max concurrent jobs to 20 in FD and SD to
915 correspond with the default .conf files.
916 kes Rewrite the Win32 service routines. This eliminates the 3 copies
917 some different, of the same file created by RN when porting the
919 kes Rearrange some of the Win32 directories and the placement of the files
921 kes Set DEVELOPER flag in version.h
923 ========================================================================
924 Release Version 2.2.0
926 kes Apply a second doc patch from Marc.
927 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
928 improves the tips section that discusses how to setup multiple
931 kes Update bat README file.
932 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
933 corrects a typo in the Recycle status check in db_find_next_volume().
934 This will probably fix a number of annoying problems with multiple
936 kes Modify most of dird/msgchan.c to use bsock class calls rather than
937 bnet calls -- no functionality change.
939 kes Modify the Verify output to specify if files are missing on
940 the Volume(s) or disk. Fixes confusion in bug #916.
941 kes When more than one Volume is read in a migration job, the last
942 Volume bytes reported are from the last read volume rather than
943 the last written volume. Fixed. This fixes bug #910.
944 kes Fix display of Recycle flag after update volume=foo recycle=yes.
945 It previously printed New Recyle flag is: no. This fixes bug
948 kes Correct seg fault when switching tape drives during restore.
949 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
950 be used until after 2.2.0 release.
952 kes Remove fnmatch() in SD that permitted wild card specifications.
955 kes Fix %g in filename returned by SQL for browse tree reported by
957 kes Fix configure so that it puts config.out in the cwd rather than
959 kes Attempt to fix the locking problem reported by Eric in bug #906.
960 kes Make berrno class to leave errno unchanged after constructor call.
961 kes Make bnet_server use the heap rather than the stack to allocate
962 its socket fd pointers to avoid a crash at termination. Problem
963 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
965 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
966 and putting it in depkgs-qt along with Qt4.3.
968 kes Rework code in acquire.c that switches drives for reading when
969 the Media Type does not match. This should fix bug #906
971 ebl Fix a director segfault during job setup #907
972 kes Correct seg fault in postgresql when first operation returns no
973 rows. Fixes Dirks File browser problem seg fault with bat.
975 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
976 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
979 kes Implement PopUp YES/NO dialog for bat.
981 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
983 kes Correct RunScript to terminate job in FD on failure.
984 kes Change abort_on_error and AbortJobOnError to fail_on_error
985 and FailJobOnError in RunScripts.
986 kes Minor tweaks of code formating in RunScripts, principally to
987 avoid depassing 80 columns.
989 kes Eliminate one #ifdef Win32 in bsmtp
990 kes Implement grow tool to grow a file for testing very large databases.
991 kes Add big-vol-test to test Bacula seeking with > 5GB.
994 kes Modify find_next_volume() to return all values in Media record.
995 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
999 kes Update Release notes
1001 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
1002 Warning, in previous beta version, all media get from scratch keep their
1005 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
1006 This should fix bug #842. Made a note to look at removing the temp
1007 files at the end of the install.
1008 kes Add ability to mount and unmount a file device providing it is
1009 marked as being removable and has the appropriate mount and unmount
1010 commands defined in the Device resource. This fixes bug #830.
1011 kes When applying a storage override, release all previous storage
1012 definitions rather than just prepending the new storage.
1013 This should prevent a good deal of confusion.
1015 kes Implement ./configure search for qwt libraries.
1017 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
1018 Win32 FD. This should fix bug #893.
1019 kes Remove an unnecessary beep in Win32 init code.
1020 kes Update copyright dates in Win32 executable about boxes.
1021 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
1022 code with a BSD getopt.c and getopt.h.
1023 kes Remove sched.h from the Win32 compat directory -- not used.
1024 kes Remove the Exit menu item from the Win32 tray monitor. If you really
1025 need to shut it down, do it through the services panel or the command
1027 kes Remove some inappropriate Bacula FSFE copyrights.
1028 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
1029 kes Fix regress config non-portable test as pointed out by
1030 Florian Heigl <florian.heigl@gmail.com>
1031 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
1032 as pointed out by Florian Heigl <florian.heigl@gmail.com>
1034 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
1035 Reported by Frank Sweetser.
1039 kes Fix client-only build.
1040 kes Integrate client-only fixes for bsys (initgroups) and conio from
1041 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
1042 kes Make arguments to get_scratch_volume() in same order as other
1044 kes Rework the prune_volumes() subroutine so that after purging and
1045 no volume found in desired pool, it will check for a scratch
1046 volume. This prevents recycling the whole scratch pool.
1047 kes Add code to status storage to print boffset_t (largefile support).
1049 kes Move qwt (Graphics libarary for Qt4) to depkgs.
1050 kes You now need a --with-qwt=<dir> to be able to build bat.
1051 kes Update src/win32/cats/bacula_cats.def to include the new
1052 db_get_query_dbids() call on Win32.
1054 kes Correct a problem when selecting a scratch volume and moving
1055 it to another pool that lost some columns.
1056 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
1057 kes Enhance Autochanger error messages to include Volume and device name.
1058 kes Rework prune_volumes() code to take account of InChanger flag,
1059 and to handle recycling volumes going to the Scratch pool and
1060 current pool because the RecyclePool directive.
1061 kes Implement a better and more efficient db_get_query_dbids() to
1062 handle creating and passing back a list of DBIds.
1066 kes Start work on new more efficient DBId subroutine. First use
1067 will be for recycling volume to Scratch inchanger.
1068 kes Increase number of JobIds in pruning from 1000 to 10000.
1069 This to be replaced by above routine.
1070 kes Begin implementation of building Qt4 on Win32.
1071 kes Correct typo in fix I added for bad TLS shutdown.
1072 kes Pull 2.0.3 patches into patches directory.
1073 kes Update Release notes. Include qt-console in line count.
1074 kes Update Projects file.
1076 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
1077 bug in migration code where a job that spanned two volumes
1080 kes Implement new BST_DESPOOLING blocked state. Change from locking
1081 during despooling in SD to blocking. This means that other threads
1082 can work with the device structure, in particular the reservations
1083 system while despooling.
1085 kes Fix return in reservation message queue that missed clearing
1086 the jcr lock (implemented 26Jun07 below).
1087 kes Rename a number of dev methods to make locking function names
1089 kes Document locking in lock.c. Move lock structures to new file
1092 kes Move reservations message lock to lock jcr only this
1094 kes Move main SD locking code into lock.c (new file).
1095 kes Update Win32 build to include lock.c
1099 kes Dirk committed the qwt library code for drawing graphs in bat.
1100 kes Tweak install of qwt so that it is integrated with ./configure.
1102 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
1103 out by Eric (my typo).
1104 ebl Fix configure.in to get batch mode enable
1105 kes Return correct string from authenticate.cpp in bat when connecting
1107 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
1108 spurious line drops when using TLS.
1109 kes Do not file reparse points when restoring a file that already
1112 kes Implement Windows reparse points -- similar to directories, but
1113 we do not descend into it. This is a first cut. They seem to
1114 be backed up, but restore is not yet tested.
1115 kes Remove restore_blocking in tls code when shutting a socket to leave
1116 it in blocking mode. Hopefully this will fix the encryption bug
1117 reported by Frank Sweetser.
1118 kes When opening a file for backup, tell the OS that we are going to
1119 read it sequentially -- optimization.
1120 kes Change variable names in authenticate_director() to not conflict
1121 with member names in bat. Caused great confusion with compiler,
1124 kes Queue openssl error messages in case of comm problem.
1125 kes Do shutdown() call if socket terminated.
1126 kes Remove some duplicated code in tls.c
1127 kes Move more of the bsock member variables into private and access
1129 kes Add Frank Sweetser's tls-test to the regression suite.
1131 kes Add Swedish sv.po file
1133 kes Don't print clock skew message in FD if less than 3 seconds diff.
1134 kes Add a bit of VSS info to status client.
1135 kes Implement a first cut of Vista VSS, using Win2003 code.
1137 Release: 2.1.20 beta
1139 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
1140 loaded tape but uses first drive).
1141 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
1142 This was indeed a Win32 issue.
1144 kes Simplify search of autochanger for in-use Volume.
1145 kes Fix exit condition of check for in-use volume. kes Remove
1146 inappropriate my_postgresql_free_result() in db_close()
1148 kes Fix bad return in FD when encryption signature not found.
1149 Probably caused a crash.
1150 kes Inhibit missing encryption signature error messages for
1151 file types where no signature computed.
1152 kes Correct inverted check on autochanger in reservation system.
1153 kes Tweak debug code in autochanger reservation.
1155 kes Add some additional locking in the cats directory in subroutines
1156 that modify packet variables called from batch insert.
1157 kes Rework how dcrs are allocated. new_dcr() can now be called
1158 with an existing pointer, and it will simply clean it up.
1159 This allows the reservation system to test various different
1160 devices, and will permit easy device changes.
1161 kes A bunch of changes all over to handle new new_dcr() calling
1163 kes Work more on the Volume management in the SD. Remember Volumes
1164 for tape drives and for autochangers (even virtual disk changers).
1165 kes When looking at the Volume list to reserve a drive, handle
1166 autochanger names correctly by interating through the changer
1167 devices. Also call the Director to see if a Volume is suitable
1168 for the current job.
1169 kes Fix some bugs in bscan. Make sure all media records are written.
1170 Make sure that valid JobMedia records are written for disk files.
1171 Previously they were completely wrong.
1172 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
1173 that the URLs don't change and so that the developers will all
1174 work off the same copy. Rebuild from scrach.
1175 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
1177 Release: 2.1.18 beta
1179 kes Fix seg fault in FD from incorrect digest size.
1180 kes Fix argument to non-OpenSSL crypto.c subroutine.
1182 Release: 2.1.16 beta
1184 kes Remove a few malloc()s from the encryption code.
1185 kes Use the class calls to bsock in filed/backup.c and restore.c in
1186 place of the old bnet_xxx code.
1187 kes Implement code that does an on the fly calculation of the
1188 signing digest during restore of encrypted files. It makes
1189 a best guess at the algorithm, and if it is not correct, will
1190 then revert to the old code which reads the file after it is
1192 kes Implement at least one missing crypto stream in stream_to_ascii()
1193 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
1194 #877 where a reload with bad syntax causes Dir to exit.
1196 Cut: 2.1.14 beta (not released)
1198 kes Do not free a volume on a tape drive until another volume is
1199 mounted and read, or the autochanger unloads the volume.
1200 This should help the SD re-use volumes that are already mounted,
1201 and should fix bug #886.
1202 kes Apply patch from user brettedgar that allows gnome2-console include
1203 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
1204 kes Apply patch from Lucien Weller that fixes day of week calculation
1205 because of DST flag problem. Fixes bug #887.
1207 kes Move find_next_appendable_volume() to after acquiring a valid device
1208 in reserve.c. This fixes bug #864 -- confirmed by reporter.
1210 kes Unable to reproduce bug 872. However added additional testing for
1212 kes Bug #874 resolved by documenting SQLite limitations.
1213 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
1214 kes Bug #881 resolved by removing typo in mtx-changer script.
1215 kes Made Frank Sweetser's wiki the official Bacula wiki with his
1216 approval. Added a link to the wiki on the web page, and implemented
1217 a backup from http://paramount.ind.wpi.edu
1219 kes Fix update allfrompool to pass pool name.
1221 kes Convert to pure GPL v2 license.
1222 kes Fix sscanf problems reported by Peter Buschman that caused
1223 a bus error on Solaris.
1224 kes Rework (simplify) the select prompt in bat.
1225 kes Move get_jobid_from_tid() into lib and create a
1227 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
1228 should definitely fix the problem of lost error messages in the
1230 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
1231 kes Eliminate tcpd.h from the project. Enclose the #include from the
1232 library with extern C ...
1233 kes Add print of signal name when a signal is trapped.
1235 Release: 2.1.12 beta
1237 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
1239 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
1240 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
1241 makes SQLit3 run 30 times faster, though a bit less safe.
1242 kes Implement --with-batch-insert in configure and detection of thread
1243 safe libraries. It is on by default, but turned off if no thread
1244 safe library (e.g. SQLite 2) is available.
1246 kes Fix Bacula PostgreSQL buffer overruns.
1247 kes Do better checking for NULL results returned from PostgreSQL;
1248 implement retry for failed queries; clear results buffer after
1249 failed query. Hopefully this will correct the PostgreSQL failures.
1251 kes Implement algorithm to handle only one appendable volume with
1252 Prefer Mounted Volumes = no.
1253 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
1254 returned from a query.
1255 kes Make volume lock recursive.
1256 kes Implement an additional volume reservation algorithm that
1257 starts by considering all reserved volumes then uses the
1258 old brute force algorithm of searching the resources to
1259 find a suitable device.
1260 kes Add new reservations debug code and refine the old code.
1261 kes Update the win32/dll/bacula.defs file.
1263 kes Tweak reservations algorithm to permit a few more cases, i.e.
1264 volume reserved, but on different drive, ...
1265 kes Enhance SD status to include Pool and Media Type for drive in a
1266 more readable format (a bit longer).
1267 kes Fix PostgreSQL double free.
1269 kes Minor refactoring of restore decryption code.
1270 kes Add code to smartall.c to detect double free of a buffer.
1272 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
1273 so that bsmtp will create a correct email address (mailbox only).
1274 kes Modify 'memory' command so that the buffers are listed as 'In use'
1275 to avoid confusion with Orphaned buffers.
1276 kes I reworked the OpenSSL include/lib flags to be handled in
1277 the standard Bacula way, which should fix bug #863 concerning
1278 non-standard OpenSSL libraries.
1280 kes Implement Help Browser window for bat.
1281 kes Fix reload bug that reset StorageId to zero.
1283 kes Fix TLS #ifdefing when TLS turned off.
1284 kes Ensure that when labelling a tape with Slot=0 that InChanger
1286 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
1288 kes Add StartTime to final uar_sel_jobid_temp query so that we can
1289 add DISTINCT (required by PostgreSQL).
1290 kes Implement BSOCK authenticate_director() method. Eventually will
1291 authenicate all daemons.
1292 kes Move several more functions into the BSOCK class.
1294 kes Add code to tell the OS that we no longer need a cached
1295 file that we were reading. In findlib/bfile.c. Also,
1296 only cache files that we are reading. Thanks to
1297 Tobias Oetiker <tobi@oetiker.ch> for the idea.
1298 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
1299 kes Implement script to automatically generate cats and dll .def
1300 files for Win32 dll.
1301 kes Update README.mingw32 to include new .def file generation.
1302 kes Correct typo in UTF-8 error message as reported by:
1303 jhernandez <julianhernandez@gmail.com>
1304 kes Add additional sm_check() code on debug level 1.
1305 kes Set default debug level to 1.
1306 kes Trap SIGABRT in attempt to get traceback.
1308 kes Reduce bat connect timeout from 30 to 15 seconds.
1309 kes More restructuring and implementing BSOCK class in place of
1311 kes Remove a few unnecessary malloc() tests in crypto code.
1312 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
1313 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
1314 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
1316 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
1318 kes Fix Verify InitCatalog. The attributes were not pointing to the
1319 correct saved location.
1320 kes Implement message callback so that GUI is sure to get all
1321 daemon messages. Currently displayed in a dialog in bat.
1322 kes Ignore SIGUSR2 (Bacula timer) in bat.
1323 kes Apply regress patch from bug #859 to allow regress to work
1324 with Solaris compiler.
1326 kes Begin adding TLS support to bat.
1327 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
1328 clean up lex.c and make it more readable.
1330 kes Move more bnet functions into the BSOCK class.
1331 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
1332 kes Complete change of berrno strerror() method to bstrerror()
1334 Release: 2.1.10 beta
1336 kes Cleanup incorrect email addresses in bsmtp.
1337 kes Make bat display initial messages rather than discard them.
1339 kes First cut of adding .mod to the run command.
1340 kes Implement auto display of messages in bat.
1341 kes Enhanced preferences to allow all Bacula output to be
1344 kes Try to make bsmtp date routines more generic.
1345 kes Fixed bug #856 autochanger documentation.
1346 kes Rework bsmtp date editing for Win32. This fixes bug #854.
1347 kes Add new cats entry point so Win32 builds.
1349 kes Attempt to fix bsmtp date editing on OSes without %z editing.
1351 kes Do better checking for the MySQL 64 bit libraries looking for both
1352 .a and .so libraries.
1353 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
1354 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
1355 kes Require the thread safe version of MySQL during configure. Thanks
1356 to Andre Noll for pointing this out.
1357 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
1358 continuing in migration code.
1359 kes Apply implementation of tray-monitor font derived from gnome-console
1360 submitted by Andreas Piesk <a.piesk@gmx.net>
1362 kes Eliminate important memory loss in SQLite
1363 kes Fixed the batch insert MySQL thread specific data that was not
1364 being freed. See cats/mysql.c:db_thread_cleanup().
1365 kes Fix restore before command.
1366 kes Convert old hdr.name to name() in a few places.
1367 kes Implement update jobid command.
1368 kes Return all time_t dates in db_get_job_record()
1369 kes Stop watchdog in SD earlier.
1370 kes Put Pool just after Storage in please mount message.
1371 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
1374 kes Update the po files.
1375 kes Fix Verify InitCatalog by making it cache attributes.
1377 kes Change name bacula-bat to bat for man 1 page to correspond to
1379 kes Check for client and store NULL pointers in status command. This
1381 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
1382 kes Fix sign extended editing of %p.
1383 kes Clean out a little old #ifdefing in cats/mysql.c
1385 kes If time diff between DIR and FD is more than 600 seconds convert
1386 INFO message to WARNING.
1387 kes Implement heap size display in status for all daemons.
1388 kes Attempt to fix MySQL db open memory loss (not successfull).
1389 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
1390 kes Eliminate memory loss in MySQL (possibly other SQLs) during
1391 Query. This looks like a MySQL but but by doing extra releases,
1392 the memory goes away. This should fix bug #847.
1394 kes When backup fails, cancel SD before waiting for sd termination.
1395 kes If SD is waiting for FD to connect during cancel, wake up the
1397 kes Fix fsf code so that errno is correctly reported.
1398 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
1400 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
1401 so that Bacula doesn't later stumble into a seg fault.
1402 kes Use the term Restore Client in the restore Job report.
1403 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
1404 the original job's FileSetId.
1405 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
1406 spooling in migration jobs. Not yet tested.
1407 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
1408 reading conf file from a pipe. However, do it with open_bpipe()
1409 rather than popen. Not yet tested.
1411 kes Fix an ugly bug where the VolCatBytes were getting updated
1413 kes Implement bconsole memory command that prints current memory
1414 usage, plus smartalloc dump.
1415 kes Clarify some error messages in backup, admin, and migrate.
1416 kes Shrink label dialog to smaller size.
1417 kes Invert Cancel OK buttons on restore to be OK Cancel.
1418 kes More strerror() to bstrerror() conversions.
1420 kes Start implementing bstrerror() in place of strerror().
1421 kes Stripping path -- seems to work.
1423 kes Prevent door and port files from being restored (mostly
1425 kes Free an unreleased buffer in compat code.
1426 kes Change console Job name from *Console* to -Console- to eliminate
1427 Win32 filename problems. Put Win32 path separator when creating
1428 Console file. This fixes bug #846.
1429 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
1431 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
1433 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
1434 to force Win32 error message.
1436 kes First cut strip path. The data should be passed to the FD,
1437 but nothing is done with it yet.
1438 kes Enhance the digest and signature routines in the crypto
1439 library to accept a JCR and to use it to print error messages
1440 so that they will go in the Job report rather than the daemon's
1442 kes Simplify some of the verify signature code.
1443 kes Simplify a few of the alternative returns in the signature
1446 ebl Use only POSIX regex instead of GNU regex in breg.c for
1447 File relocation. It fix broken freebsd compilation.
1448 kes Convert all other Dir files to use new ua class message
1450 kes Tentative fix for missing digest signature in bug 807.
1451 kes Correct handle problem in new win32_ftruncate routine.
1452 kes Convert ua_purge.c and ua_update.c to use new ua class
1453 message routines for bat.
1455 kes Correct incorrect installation of LICENSE in Win32 installer.
1456 kes Display LICENSE at the beginning of the Win32 install.
1457 kes Attempt to correct the need for the png files to be installed
1459 kes Reapply my bat.conf install script in qt-console. I think I
1460 editted bat.pro instead of bat.pro.in and it was lost.
1461 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
1462 the /var/lock/subsys for subsysdir. Also corrects typos in the
1465 kes First cut update job.
1466 kes Correct configure to include qmake of src/qt-console directory.
1468 kes Make restore job yes/mod/no print in one command so GUI works.
1469 kes First cut implementing backup and restore client.
1470 kes Correct editing in Verify output that caused a seg fault.
1472 kes Insure that bat.conf is not overwritten during installation.
1473 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
1474 while I was implementing migration in March 2006 !
1476 ebl Cleanup file relocation, using char *RegexWhere instead of
1477 char *where + bool where_use_regexp
1478 kes Update some manpages and add bat manpage.
1479 kes Make a first cut at converting bacula.spec.in for bwx-console
1481 kes Apply patch from John Goerzen to add hostname as fourth argument
1482 to make_catalog_backup script.
1483 kes Fix typos I introduced into bsmtp.c
1484 kes Make pm_strxxx() routines handle input of NULL pointer. This
1485 is to protect from NULL pointers returned from SQL databases.
1486 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
1487 kes Add more debug to FIFO code -- fix fifo regression test.
1489 kes Implement posix_fadvise in FD, and for reading spool files in SD.
1490 kes Add thread timer to bnet_connect() to break from OS if wait time
1493 kes Update Win32 build to include new files, new symbols, and
1495 kes Implement socket level heartbeat (tcp_keepidle)
1496 ebl Commit File relocation patch
1497 kes Make bat have 'make install' target.
1498 kes Warn during install if old gnome-console binary found.
1499 kes Warn during install if old wx-console binary found.
1500 kes Add -8 option to bsmtp command line to add content type utf-8.
1501 Fixes bug #809. (Character coding problem in bsmtp).
1502 kes If < is found in target (from, to, cc) then do not enclose the
1503 target in < > in bsmtp. Fixes bug #772 (malformed address).
1504 kes When printing certain items in dbcheck, stop after 300000.
1505 Fixes bug #822. (dbcheck loops).
1506 kes Incorrect status in Dir after waiting for mount with poll set.
1509 kes Extend idea of Prefer Mounted Volumes to mean a volume about
1511 kes Print waiting to reserve a device every 5 mins.
1513 kes Don't call close_part in label.c if tape and relabel.
1514 kes Don't free volume if busy in close() -- should help with
1516 ebl Fix #824 RunScript bug (After script could be execute twice)
1517 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
1518 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
1519 Add a regression script to test RunScript
1521 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
1524 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
1525 deprecated. No additional bugs will be fixed, and they will be dropped
1526 in a future release (probably 2.4.0).
1527 kes Change name of wx-console to bwx-console to make it more Bacula
1529 kes Change the name of gnome-console to bgnome-console to make it
1532 kes Some time in March, a Feature Request with patch from Jorj Bauer
1533 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
1535 The ability for the director to validate a Client (FD) CN against
1536 an arbitrary set of patterns rather than the hostname, with
1537 A new 'TLS Allowed CN' set of directives which are implemented
1538 in the Client resource. Then pattern matching is used in place
1539 of hostname matching against the Certificate's CN. As an example, we
1540 have certificates which (a) use a local CA, and (b) have a CN of the
1542 kes Add new/changed entry points to Win32 build
1543 kes Create unaccepted-projects for projects that are not accepted.
1544 kes Simplify locking in the reservations system.
1545 kes Add more debug code in reservations.
1546 kes Make sure error condition on reserving a volume is handled correctly.
1547 kes Correct handling of volume_in_use.
1548 kes Correct handling of initializing a device.
1549 kes Move handling of broadcasting releasing a device into release_device().
1550 kes Correct attaching dcr to dev so that it is only done if device
1551 is properly initiated.
1553 kes Locking debug level tweaks in SD.
1554 kes Tweak new Volume code.
1556 kes Add exec external-command [wait-seconds] to bconsole. This
1557 executes the external-command. Note! normally external-command
1558 should be enclosed in double quotes.
1559 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
1560 it should normally be off in a production system.
1562 kes Implement die command for SD so that we can force it to dump.
1563 kes Implement SD lock debug code.
1564 kes Implement new algorithm for keeping Volume list in SD. It
1565 is now owned by the device.
1567 kes Implement new code for freeing in use volumes that should
1568 resolve if not all, some of the problems of multiple drive
1569 tape conflicts described in bug 801.
1571 kes Fix gui/bacula-web/images files in svn.
1572 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
1574 ebl Fix a bug in batch mode (in string escape)
1575 kes Correct migration prune SQL typo that crept in in a
1576 recent 2.1.x change.
1578 kes Move bnet_despool() into class in bsock.c
1579 kes Modify job report to include director name and Build OS.
1580 kes Move drop root privilege and check_catalog() before fork.
1581 kes Add update database scripts (version 9 to 10) to updatedb directory.
1583 ebl Check size and age of each file after its backup to see if
1584 it has changed during backup, if 'checkfilechanges' is set.
1585 The FD will do an extra check (stat(2)) after
1586 each file backup. mtime, ctime and size are compared with
1587 'before backup' information. If time or size mismatch, an
1588 error message will be generated. You must upgrade FD to use it.
1590 kes Make database name and user configurable
1591 --with-db-name=xxx --with-db-user=xxx
1592 kes Add back database type to message.c for debugging.
1594 kes Implement dir_sql() which issues an SQL query.
1595 kes Modify bat medialist to use dir_sql() and do some minor C++
1596 formatting as well as eliminating a number of pointers, simplifing
1599 kes Fix some of the mtx-changer grep commands for tape label readers.
1600 kes Convert a number of bsendmsg into the appropriate send/warning/error
1601 message class calls.
1602 kes Suppress the using database message in the .sql command.
1603 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
1605 kes Add context menu for floating a window.
1606 kes Some minor cleanup and name changes in qt-console
1607 kes Add doing mt setblk 0 in Win32 mtx-changer.
1608 kes Apply Martin's bug fix to move definition of ENODATA for
1610 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
1611 sqlite2 and sqlite3.
1613 kes More pruning cleanup.
1614 kes Turn on wait_for_drive by default in mtx-changer.
1615 kes Turn on Batch insert code by default as it now passes regression.
1616 kes Add ./configure --enable-bat to enable building of Bat.
1617 No install yet though.
1619 kes Implement a new .sql command for bat.
1620 kes Implement code to turn off pruning in obtaining the next volume.
1621 Pruning is turned off for the status dir command, but turned on
1622 for SD requests and for the list nextvolume command.
1624 kes Correct Qmsg() that was not updated correctly when committing a
1625 previous change (probably the recent TLS patch).
1627 kes Write new subroutine is_volume_purged() that explicitly checks
1628 if the Volume is purged, and if so marks it as such. This should
1629 resolve problems reported about needing to mount twice to recycle
1631 kes Rewrite pruning algorithm to do more work in the SQL engine, and
1632 to pass a list of JobIds to be deleted to SQL. Also, minimize the
1633 amount of duplicated code.
1634 kes Do volume pruning only for the Media Type desired (reduces pruning time
1635 if multiple Media Types are in the same pool).
1636 kes Implement more detailed info in the Job report for the Bacula version
1638 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
1640 ebl Add bbatch tool to bench database and insert mode.
1641 Fix sql quote stuff in batch mode
1642 Fix sql stuff for mysql
1644 kes Correct problems with am/pm scheduling. Fixes bug #808.
1645 kes Implement new prunning code that prunes up to 1000 jobs at
1646 the same time. The same technique can be applied to a number
1647 of other prune/purge subroutines.
1648 kes Add an insanity check when starting a new tape job to ensure
1649 that the tape position has not been changed. If so fail the
1651 kes Fix Win32 build for dlls to add the folllowing:
1652 src/lib/bsock.c -- new file with new entry points
1653 src/lib/dlist.c -- new entry points
1654 src/cats/sql_create.c -- new entry point
1655 src/cats/sql_cmds.c -- new DATA item exported
1657 ebl batch mode cleanup bscan-test is ok now.
1658 kes Implement SD code to check length of disk volume before appending.
1660 kes Correct return status on db_batch... routines.
1661 kes Add call to db_write_batch_file_records() to migration code.
1662 ebl Fix AfterJob timing
1663 kes Move the checking of the database in initializion of the Director
1664 to after we drop privileges. This avoids the need for both root
1665 and bacula access to the DB.
1666 kes Correct a misplaced variable definition in src/filed/backup.c
1667 kes Correct how the new batch insert db_create_attributes_record()
1668 uses the arguments. Caused a seg fault in bscan.
1669 kes Implement lock() and unlock() methods in DEVICE class.
1670 Implement block() and set_block(xx) methods in DEVICE class.
1671 kes Modify bnet_connect() so that it uses time() to check for the
1672 wait time expiring (on some OSes, some system calls may not
1673 return immediately).
1674 kes Modify Verify to obtain the previous JobId when it is actually
1675 running rather than at schedule time (as it was in 1.38.x).
1676 kes Fix src/job.c to handle MaxWaitTime correctly. This should
1678 kes When checking pid in pid file, continue running if the pid is
1679 the same as ours. This occurs on IRIX after a system crash.
1682 kes Extend new GUI API.
1683 kes Make the ua structure a class, and implement send_msg(),
1684 error_msg(), warning_msg(), and info_msg().
1686 kes Apply fix from for building wx-console on the Mac from
1688 kes Implement new select mechanism for GUI programs.
1689 kes Reorganize initialization of stackedWidgets in bat.
1691 kes Add updated nagios plugin supplied by Christian Masopust.
1693 kes More bat implementation.
1694 kes File migrate bug with Pool Occupancy using mediaid instead
1695 of jobids. Fixes bug #795.
1696 kes Fix orphaned buffers in filed backup and verify due to
1697 crypto buffers not freed during errors. Fixes bug #789.
1698 kes Extend new GUI api code to tree commands.
1699 kes Ensure that tree and dot commands check console ACLs.
1700 kes Permit marking directory with trailing slash.
1701 kes Allow 20 console connections (instead of only 10).
1703 kes Add smartctl call to bacula-sd.conf as an example of getting
1706 kes Modify jobq.c to let simultaneous restore jobs run. This may
1707 cause them to fail if they cannot get a drive.
1708 kes Add Client Connect Wait to Storage daemon to permit users to
1709 modify the time the SD waits for a FD connection.
1711 kes Correct virtual changer check which was backwards. This caused
1712 volumes to be unloaded into slots already occupied.
1714 kes Apply Command ACL filter to JobId list in restore command.
1715 kes Correct typeo in var.c patch.
1717 kes Don't let Bacula prune File or Job records for the current Job.
1718 kes Fix variable substitution pad + inc bug reported (with patch)
1721 kes Correct SQLite log table index as reported by Luca Berra.
1723 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
1725 kes Begin implementing new comm signals for API.
1726 kes Fix a few places in lib/message.c where the open fd may
1728 kes Continue implementing lib/bsock.c (real class). Make jcr,
1729 who, host, and port private. There are new methods to access
1730 them for non-class use. This required touching a number of files.
1732 kes Add LANG=C to autoconf/randpass so it works with languages other
1733 than English. Fixes bug #788.
1735 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
1737 You will not be able to generate Include/Exclude list any more.
1738 It will be fixed soon.
1739 If you want to use this, you can apply
1740 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
1742 kes Restore of sockets created false error messages because Bacula
1743 no longer restores sockets, but the code was still trying to
1744 set the attributes on a non-existent file. Reported by a user.
1745 ebl finish RecyclePool feature
1746 Media will takes Pool.RecyclePool
1747 when moving from Scratch to a Pool or when user will do
1748 update volume=xxx frompool
1749 To use it, add RecyclePool = aPool to your Pool resource
1752 RecyclePool = Scratch
1756 kes Expand new BSOCK class adding signal() and new BNET signals.
1757 kes Begin enhancing the dot commands adding a new API function
1758 that returns more information and will make it easier
1759 to interface to the Director from a program.
1761 kes Make DEVICE fd private. Its new name is m_fd, and can be
1762 obtained with dev->fd() outside the class. This is the
1763 first of many DEVICE members to be made private.
1764 kes Implement Michael Renner's idea on having a virtual disk
1765 changer. I made some minor modifications (e.g. I did not
1766 implement the Virtual Changer directive, but simply set
1767 the Changer Command to an empty string.
1769 kes Implement a BSOCK send() method that writes the whole record
1770 in a single write() request rather than in two.
1771 ebl add update volume=xxx recyclepool=yyyy
1772 volume takes recyclepool from pool when using update volume=xxx from pool
1774 kes Fix encryption deblocking bug, which caused some restored files
1775 to be truncated. This fixes bug #763.
1776 kes Add FD event sequence order prepared by Eric -- for RunScripts.
1777 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
1779 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
1780 ebl Use btime_t instead of uint64_t in media patch.
1782 kes Optimize the use of the database a bit in the Status dir command.
1783 Only open it when needed, ensure that if any previous database
1784 was opened, it is closed.
1786 kes Correct VolCatBytes bug from media patch.
1787 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
1788 in the case of orphaned records.
1789 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
1790 and File records in 300K chunks to be more efficient. This
1791 idea came from Juan Luis Frances (if I remember right).
1792 kes Apply Eric's scratch patch that moves a purged Volume to
1793 the RecyclePool. Question: how is RecyclePool set? what
1794 happens to the ScratchPool?
1795 kes Apply Eric's media patch that collects read/write media
1796 times as well as byte counts. This patch requires a
1797 simultaneous upgrade of the DIR and SD. Note, there
1798 should be some way to turn off timing. I'm not sure
1799 times are in Bacula units.
1800 kes Apply Eric's batch-insert patch.
1802 kes Update projects list.
1804 kes Implement Include/Exclude file lists in FD as dlists using
1805 the new dlistString class. This permits efficiently having
1806 large include/exclude lists and completes project Item 25.
1807 kes Fix dird/ua_cmds.c so that a cancel command checks if the
1808 console is authorized to cancel the job. This fixes bug
1810 kes Modify SD so that the VolCatJobs medium record is updated
1811 at the beginning of a Job rather than the end. This
1812 fixes bug #775 where exceeding MaxVolJobs caused jobs
1814 kes Added a mutex around getting and setting Volume information
1815 so that multiple simultaneous jobs will single thread.
1817 Switch to using Subversion
1818 kes Remove src/pygtk-console/ from configure
1820 kes Delete src/lib/btree.c from win32 build, then add rblist.c
1821 plus the entrypoints.
1822 kes Apply patch supplied that corrects debug print
1823 in canceling jobs for max run time. Supplied as
1824 part of bug #621, which was previously fixed.
1826 kes Test on job_canceled() and sd_msg_thread_done inside
1827 loop starting the message thread to avoid a race condition.
1829 kes Remove rl_catch_signal from console.c as it conflicted
1830 with the header definition. Fixes bug #765.
1831 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
1833 kes Clarify some stored/acquire messages to indicate if the
1834 problem is with read or append.
1836 kes Fix memory leak with storage ids in cats/sql_get.c
1837 kes Terminate watchdog earlier to avoid reference to released
1838 memory -- reported by Jason Austin.
1839 kes Move closing the database from jobq.c to the director daemon
1840 termination routine. This fixes memory leaks for shadow jobs
1841 (i.e. migration jobs).
1842 kes Free up the unique jobid chain items in migrate.c. This fixes
1843 a memory leak problem.
1844 kes Convert some ugly looking for statements to use foreach_alist
1845 in findlib/find.c. This will facilitate converting the structures
1846 to use dlist (for large include/exclude lists).
1847 kes Fix a bug in the btree.c and btree.h routines, then rename them
1848 rblist and add them to be built in src/lib. Include some new
1849 methods written by Rudolf Cejka that make the code more readable
1850 (hides some of the ugly casting).
1851 kes Add set_next() and set_prev() methods which make the code much more
1852 readable. Also add a new dlistString class that facilitates storing
1853 strings in dlists. To be used in the large include/exclude lists.
1854 kes Make some trivial modifications to lib/tree.h that use rblist
1855 rather than dlist for storing the tree links. This was suggested
1856 by Rudolf Cejka. The result of this is that the restore tree now
1857 uses red-black binary trees rather than simple linked lists. This
1858 should give rather dramatic speed improvements for directories
1859 contining large numbers of directories/files (more than 10000).
1861 kes Fix maxruntime bug #621.
1863 ebl Implement the include JobID in spool file name project.
1864 kes Reorder projects file in order determined by Jan 2007 vote.
1865 kes Implement item #12 on project list -- quick release of FD by
1867 kes Fix open of SQLite3 db where user does not have write permission
1868 so that DIR does not crash. Fixes bug #761.
1870 kes Add back missing @ in Win32 Makefile.
1871 kes Change 'Device not configured to autolabel' from INFO
1873 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
1874 which should restart an indefinite # of times.
1875 kes Fix configure --help to print --with-mysql[=DIR]. Same for
1876 other DIR specifications.
1878 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
1879 Fix path quoting in SQLite scripts.
1880 Fix problems with SHGetFolderPath.
1882 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
1884 kes Fix Job restart on error bug that promotes an Inc to a Full
1885 backup. This should fix bug #755.
1886 kes Add qt-console and first cut of code.
1890 kes Fix Bacula->Documentation link on Win32 to point to index.html
1891 instead of bacula.html. Fixed bug #750.
1892 kes Return JobId in db_get_job_record() when JobId==0. This should
1894 kes Do not release source pointers when restarting a failed job.
1896 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
1897 This *should* fix bug #747.
1898 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
1901 kes Modify USTORE constructor to set an empty store_source string,
1902 and don't copy the store_source string in a cancel. Hopefully
1903 this will fix Arno's seg fault, bug #744.
1904 kes Add back code to disable conio in configure. Fixes bug #743.
1905 kes Correct the Options scanner in the FD to correctly handle
1906 SHA1 option, which was eating the next option. Reported by
1908 kes Add code to indicate when the SD is spooling, spool wait, and
1909 despooling as requested by Alan Brown.
1911 Version 2.0.0 released: 4 January 2007