1 Technical notes on version 2.5
9 Multiple command/console per runscript
10 console command in runscript
13 State file updated on job term
16 Duplicate Job directives
17 - Allow Duplicate Jobs
18 - Allow Higher Duplicates
19 - Cancel Queued Duplicates
20 - Cancel Running Duplicates
21 Ensure they work with RerunFailedLevels
25 Improved status commands for Bat
26 Spooling/despooling status
27 Implement ftruncate for NFS devices
28 Add long term statistics job table
34 ebl Remove tokyo cabinet from the source
35 ebl Update configure/autoconf to support berkeley DB
36 ebl Add a sort to db_get_file_list() to improve bsr construction time.
38 kes Add a mtx-changer.conf file that is not overwritten during
39 an upgrade. It fully configures the mtx-changer script.
40 kes Clear in-use bit on vol when unused while swapping.
42 kes Remove sleep at end of ./bacula
43 kes Clear hash packet for hardlinked files correctly. This corrects
44 a long standing bug where hardlinked files selected individually
45 would occasionally not be restored.
47 kes Apply Eric's patch to ensure that autoprune does not return
48 a Volume not in the autochanger unless requested to do so.
49 kes Correct bat restore display of multiple drives. This fixes
51 kes Do find_a_volume() each time an unload is done. This
52 fixes the failure of maxvol2-test.
54 kes Add some SD debug code.
55 kes Do find_a_volume() each time an unload is done.
56 kes Apply Joao's DBI patch that adds easier configuration of DBI drivers,
57 and adds --with-db-port to ./configure.
58 kes Use Qmsg() in job.c watchdog callback.
60 kes Release main control rwlock if ABORTing.
61 kes Make watchdog connect timeout queue messages rather than sending
62 directly to avoid lock conflicts with the real thread.
63 kes Add const char in dbd.c to avoid compiler warnings.
64 kes Fix python compiler string warning. Note, IMO the GNU C++
65 compiler guys have made a *very* bad change to their compiler.
66 They now force all strings to be 'const' unless you explicitly
67 cast them, which is extremely ugly and ruins nice code as well
68 as creates a lot of useless work.
70 kes Fix mtx-changer to detect both versions of Ubuntu (Debian)
71 mt. This fixes bug #1116.
72 kes Add const in python files to reduce compiler warnings.
73 This may have to be backed out because of later compiler
75 kes Fix failure of 2drive-concurrent-test. Always read label;
76 clear_unload() only after drive is defined in acquire_for_read().
78 kes Generally clean up the manual tape loading code. The main
79 conceptual change is that when a volume is marked to be unloaded,
80 its volume name is retained, and it is only marked as unloaded
81 when either the autoloader says it is unloaded or another tape
82 is read on that drive.
84 kes Add debug code and refactor subroutine in stored/mount.c
85 kes Fix format problem in bscan output reported in bug #1105.
86 ebl Fix get_next_volume_for_append logic with autochanger
87 - use pruned volumes if found
88 - don't reset the inchanger flag after getting a recycled volume
90 Fix recycle_oldest_purged_volume to take InChanger flag in account
92 ebl Add mmap/unmmap implementation for tokyodbm under win32
94 kes Make first step toward eliminating globals from config
95 scanning. Also should be a workaround for FORTIFY_SOURCE
96 GNU C bug -- fixes bug #1042.
98 kes Apply duplicate job tests to restarted jobs.
99 kes Copy more data when restarting a job so that run
100 overrides are kept. This should fix bug #1094.
102 kes More word alignment cleanup.
103 kes Fix bug where SD did not ask operator if the device could not
104 be opened. Reported by Eric.
106 kes Add dbuser to DIR conf file (replaces user).
107 kes Add --with-db-password to ./configure
108 kes Fix regress to handle db_password.
109 ebl Add new "status storage slots" that list autochanger
111 ebl Update vtape driver to compile only under Linux.
112 ebl Fix a bug when restoring with a wrong mediatype.
114 kes Eliminate ints from conf files and structures to avoid
115 word alignment problems
117 kes Fix bug reported by Scott Barninger where the bacula script
118 refers to scripts in the wrong directory. Needed to meet the
119 requirements of recent FHS location changes.
120 ebl Disable vtape for FreeBSD.
122 ebl Modify disk-changer to check if slot contains something before
125 ebl Fix vtape on win32 and debian.
126 ebl Fix autoselect patch (cause segfault).
128 ebl Fix autoselect option broken for a while. Fix #1089. Need some
129 work with StorageId to be able to use a particular drive in a
132 ebl Rename vtape to vtape.
133 ebl Update vtape driver.
135 ebl Modify vtape driver to avoid sparse file.
136 kes Add make clean of qt-source directory during ./configure
137 kes Store last block number written to tape in DEVICE and
138 use it for testing for correct last block on EOT.
140 Release Version 2.4.0:
144 kes Make sure to clear JS_WaitMedia when operator mounts a Volume.
145 This fixes bug #1095.
147 kes Add create_postgresql_database.sql to Win32 installer. Should
148 fix problem reported by Juilio Monteiro.
149 kes Get correct slot when auto unloading a device. This fixes bug
152 kes Fix multiple media restore.
153 kes Make DEVICE Slot private and access it via a method.
154 Allows better control over when it is set and cleared.
155 kes Fix possible seg fault if SQL error.
157 kes Add Martin's fixes to argument scanning for the estimate
158 command. This fixes bug #1093.
159 kes Add debug code to SD.
160 kes Fix renaming a Volume, which used the wrong Volume name.
162 kes If operator has rewind tape, print warning, release tape and
163 try once more. If tape is positioned somewhere, something went
164 wrong, so mark the tape in error and try once more. Previously
165 this error was fatal, now it produces an error message.
166 kes Ensure correct volume name displayed during restore
167 kes Ensure that Volume is mounted for restore.
169 kes Fix a few more Coverity reported problems.
171 kes Apply Allan Black's status dir job count patch.
172 ebl Add information about IMPORT/EXPORT slots in mtx-script.
173 kes Enhance a couple of SD debug messages.
174 kes Tweak unload flag setting and ensure it is set during swap.
176 ebl Fix #1091 about bad output in estimate command.
178 kes Modify autochanger locking to attempt to avoid race
180 kes Make sure device not busy before doing label command.
181 kes Display open() errors except when polling. Previously too
182 many were suppressed. This should fix bug #1070.
183 kes Fix Win32 reparse points. Bacula will not recurse into any
184 reparse point directory, including mount points, unless the
185 directory is explicitly mentioned at the top level (same as
186 with Unix). A file that is linked to another file will be
187 backed up -- much as Unix does for hardlinked files.
188 This fixes bug #1041.
190 kes Remove double quotes from ChangeLog and ReleaseNotes
191 kes Remove StorageId test when pruning and recycling (Eric's changes).
192 kes Remove old form of locking when getting volumes -- causes deadlock.
193 kes Change bat dirstat layoutWidget to dirstatlayoutWidget to make
194 the name unique and to eliminate compile time error.
195 kes Add accurate.o to Win32 FD Makefile
197 kes Fix cats dll build on Win32 after db_update_job_end_record
198 calling sequence change.
199 ebl Switch to tokyo dbm instead of htable in accurate code
200 ebl Include tokyo dbm to bacula source tree
202 kes Fix buffer overruns detected by Coverity.
204 kes Tweak joblog display.
206 kes Implement --without-qwt
207 kes Fix layout of restore tree dialog
208 kes Add configure bat QWT libraries, so that bat can be built
209 with or without the QWT libaries.
211 ebl Add dummy tape driver for regression tests.
212 kes Make sure we unload the right slot when swapping.
214 kes Add debug times, reduce size of two-pool-changer test
216 ebl Tweak autoconf scripts for vtape
218 kes Improve SD reserve debug code.
219 kes Testing an improvement to free up volumes no longer in use.
221 kes Rework SD acquire for read to handle autochanger Volume
223 kes Implement regression that explicitly tests swapping a Volume
224 from one drive to another.
225 kes Enhance disk-changer to detect most error conditions.
226 kes Fix SD code so that it properly swaps a Volume between drives.
227 This fixes bug #1083.
229 kes Apply libdbi patch from Joao Freitas for regress and for
230 Bacula trunk. Regress now works with libdbi. Nice.
231 kes Apply .nobackup patch from bug #1077 submitted by
233 kes Apply Bastian Friedrich's patch that adds %p to edit the pool
234 name into jobs cloned via the run directive.
236 kes Prevent a Volume that is being swapped from being freed from
237 the volume list. This will most likely fix, at least partially,
239 kes Fix strippath so that it does not get a buffer overrun and crash FD.
240 This fixes bug #1078.
241 kes Remove 50 millisec wait in SD that broke debugger.
242 ebl Add MaxRunSchedTime option that specifies the maximum allowed time
243 that a job may run, counted from when the job was scheduled.
244 ebl Fix MaxWaitTime option that specifies the maximum allowed time that
245 a job may block waiting for a resource, counted from when the job starts
246 ebl Rename (add) Max(Incr|Diff|Full)WaitTime to Max(Incr|Diff|Full)RunTime
247 kes Apply patch from bug #1076 by Tullio Andreatta <t.andreatta@troppoavanti.it>
248 that implements multiple commands per line in the console when using
249 readline. Modify the default to use a semicolon as the command separator.
251 ebl Fix SQL query in migration code.
252 ebl Make accurate mode with hash disk pass regression tests
254 ebl Implement first cut of accurate backup with hash disk.
256 kes Force unload of volume when wrong volume mounted in SD.
258 kes Fix bat seg fault at termination.
259 kes Add Bacula generated version to bat about box.
262 kes Experiment with allowing multiple read jobs.
263 kes Move final volume swapping code to DCR method and
264 call it from acquire_for_read().
265 kes When wrong volume is mounted during read, unload_autochanger.
267 kes Integrate the libdbi changes from Joao Henrique Freitas
269 kes Stop searching for Volumes in SD askdir if DIR returns the
270 same volume name twice in a row.
271 kes Close bat console windows first to eliminate error message
274 kes Tweak the swap Volume from one drive to another code so that
275 it now seems to work.
276 kes Resolve several problems with recycling that broke the new
277 code (these problems are in 2.2.9 as well).
278 kes Remove the volume lock when calling the sysop code.
279 kes Don't mark a reserved volume with no writers as unused otherwise
282 kes Rework class structures for VOLRES, DCR, and DEVICE to make
283 the method names a bit more logical, and for more logically
284 handling the responsibilities.
286 kes Remove redundant code in terminating the scheduler that just
287 causes a seg fault in many cases.
288 kes Cleanup releasing a volume and make it a DCR method.
289 kes Improve algorithm for detecting pre-reserved volume and
292 kes Tweak volume swapping code so it works.
293 kes Correct name overloading in mount.c
294 kes Replace released flag in VOLRES with reserved and add access
295 methods for the VOLRES class.
296 kes Prevent volume from being released while being swapped.
297 kes Apply Bastian Friedrich's edit codes patch for the bpipe-fd
299 kes Apply Bastial Friedrich's edit pool=%p patch for run clone
301 kes Refactor parts of stored/mount.c
303 ebl Add sanity checks for VolWriteTime and VolReadTime
304 ebl Take care of bad clock changes while computing VolWriteTime
305 and VolReadTime. This should fix or limit #1066
306 kes Correct error string numbers in dird/catreq.c
307 kes Restructure reserving, acquiring, and mounting volumes. Calls to
308 autochanger are deferred for mount.c -- simplifes the code.
310 kes Do not prune any running job. It just fails the job.
311 kes Lock the volumes when changing dev->reserved_device and marking
312 the volume unused otherwise the device can get reserved by
313 another job before the volume is released, thus blocking it.
315 kes Correctly detect Ubuntu systems, and add ubuntu platform directory.
316 kes Fix bug #1063, reuse of freed ptr in list nextvol.
317 kes Release regex compile buffer in filed/job.c
318 kes Add proper type of const char in sql_create.c
319 kes Turn off debug in daemon termination routines
320 kes Move free_volume_list() before devices are freed in stored.c
321 kes Fix reference to uninitalized stack variables in bregex.c.
322 This should correct bug #1067.
324 kes Fix possible seg fault in SD when freeing a volume entry.
326 kes Implement unload_dev() before swap device.
327 ebl Add statistics prunning with option and menu
328 kes Separate unload_dev() from unload_other_device() in autochanger.c
330 kes Apply patch from bug #1069 that corrects spurious error messages
331 when ACLs enabled on SGI but no ACL exists.
332 ebl Fix small segfault in bacula-sd when debug level is 500
333 kes Modify run_program() and run_program_full_output() to use
334 call by reference for the results string. This corrects a long
335 standing problem where the address of the string may be changed
336 in the subroutine but not in the calling program.
338 kes Re-enable code to remember last volume mounted on a non-tape
340 kes Add patch supplied in bug #1068 that fixes a SD crash when using
341 a Virtual autochanger.
342 kes Generate correct JobMedia records during spooling/despooling when
343 running concurrent jobs. Thanks to Tom Ivar Helbekkmo
344 <tih@hamartun.priv.no> for excellent analysis and testing.
346 kes Tweak hash algorithm for htable using Martin Simmons idea
347 for doing a circular shift.
348 kes Remember what volume is in VTLs (previously turned off for
350 kes Analysis of JobMedia records by Tom Ivar Helbekkmo <tih@hamartun.priv.no>
351 pointed out some problems in creating JobMedia records during
352 spooling with concurrent jobs. Fix the problem by updating the
353 start file position before despooling and generate a jobmedia
354 record at the end of despooling.
356 kes Fix handling of JobMedia records during spooling and when a
357 Volume is changed without actually writing data to the Volume.
359 kes Rework certain SD locking based on gdb tracebacks of deadlocks
360 sent by Eric. This code now uses only the volume_lock() rather
361 than the reservations lock when at EOM and acquiring a new
363 kes Ensure only one exit point in several subroutines.
365 kes Implement bsock code to permit locking. Use the new code in Verify
366 in the FD to prevent the heartbeat thread from disrupting the Verify
367 data sent to the Dir.
368 kes Modify SD locking to eliminate locking the reservations system from
369 outside the system. Use the volume lock when getting media data
370 and reserving a new volume at end of media.
371 kes Add Eric's volume_unused() fix to stored.c so that Volumes found
372 when SD starts are not locked into place.
374 kes Fix error compiling runscript code on 64 bit machines.
375 kes Tweak Win32 mount point code.
376 kes Fix a couple of bugs in the accurate code (bad sscanf, buffer not
377 cleared giving bad file estimate).
378 kes Implement BIG_MALLOC in htable code. Runs 2.5 times faster for
381 kes Keep Schedule run lists in order as suggested by
384 kes Implement autostart scripts for Debian.
385 ebl Implement upgrade catalog scripts.
387 ebl Apply jobstat patch for long term statistics. Have to implement
388 purge stats command and upgrade scripts.
389 kes Fix mtx-changer.in for broken Debian mt program.
391 kes Fix large number of JobMedia records reported by Eric Bollengier.
393 kes Apply doc fix from bug #1062.
394 kes Resolve crash and improper restore wx-console Win32 restore
395 GUI. Fixes bug #1065.
396 kes Update Win32 wxWidgets to latest version.
397 kes Attempt to do correct handling of Win32 mount points. Should
399 kes Fix Win32 FD backup/restore memory leak due to improper termination
400 of BackupRead/Write. This fixes bug# 1038.
402 ebl Reduce memory usage for accurate backup, working only with ctime
403 and mtime. (not all Lstat field)
404 About 40MB for my Linux system (400.000 files)
406 kes Add dcr->reserved_volume flag that allows us to release a volume
407 even if it is not vol->released. This allows maxvol2 to work when
408 Volumes expire and we are already writing to the device (i.e. a
409 volume is pulled out from under us by another job terminating after
410 we reserve the drive).
412 ebl Permit multiple command/console per runscript definition.
413 RunScript { command = /bin/true ; command = /bin/false ... }
414 ebl Add RunsWhen = AfterVSS to runscript. You can execute a command
415 (restart an application) just after the VSS snapshot on windows.
416 kes Don't zap dcr values during release_volume() as they might
417 have the next Volume to be mounted.
418 kes Fix AIX prototype.
420 kes Second cut of drive switching during backup.
423 kes Update Win32 version of wxWidgets to most recent version.
424 kes Tweak Copy job details.
425 kes Rework dir_find_next_appendable_volume to make a bit more effort
426 to find a suitable volume before giving up.
428 kes Make ask_sysop_to_create... to return if waken from wait.
429 This helps get out of blocked conditions.
430 kes Experimental implementation of switch_device in reservations.
431 kes Implement FD version to allow easier protocol changes.
432 kes Add Plugin Options string -- not yet passed to FD.
433 kes Implement PluginOptions ACL.
435 kes Attempt to correct problems with restores with autochangers and
436 use counts going negative
437 kes Rework SD status command and implement API for bat. Implements
438 header, runing waitreservation, devices, volumes, spooling,
439 and terminated status keywords.
440 .status storage=xxx <keyword>
441 kes Clarify TLS error message by adding double quotes around name.
442 kes Simplify SD/FD status code by putting api flag in STATUS_PKT
443 kes Pass jcr to tls routines so debug messages can be handled better.
444 kes Rework jobq resource allocation code, and possibly fix a bug
445 that caused reference counts to get out of sync.
447 kes Rename fd/dir plugin to use Bacula standard underscore.
448 kes Plugin work -- bring dir up to fd level.
449 kes Start implementation of VTL code
450 kes Fix Win32 build after adding new cats subroutine.
452 kes First cut at Duplicate Job implementation.
454 kes Fix bugs in MaxFullInterval and Implement MaxDiffInterval.
455 kes Start PluginOptions string, and refactor a bit of ua_run.c
456 ebl Apply Allan patch that permit to reset recyclepool.
458 kes Test patch -- possible fix or improvement for bug #1053
459 kes Refactor FD and SD status commands to permit new API code in
460 SD, and to fix Win32 build.
461 kes Win32 build is now working.
463 kes Implement 'MaxFullInterval' and start 'MaxDiffInterval' based on
464 some ideas in patch from Scott Bailey.
465 kes Begin implementation of duplicate Job control.
466 kes Fix some of Win32 build after recent additions.
467 kes Apply patch from Frank Kardel that implements 'honor no dump flag',
468 which causes the FD to detect whether or not the OS has the
469 honor no dump bit (*BSD systems), and if so, to skip backing up
470 any file with this bit set. The feature is enabled by setting
471 'honor no dump flag = yes' in the Options section of a FileSet.
473 kes Correct po warning message with datarootdir
474 kes Implement more code in dird.c to put configuration parsing in
475 a class rather than use globals.
476 kes Restructure SD status command for implementation of bat API
479 kes Suppress incorrect 'Will not descend from x into y' messages.
480 kes Eliminate FORTIFY_CODE=2 bug, and make first cut at removing
481 daemon globals used by parser.
482 kes Apply Joao's patch to separate DB_TYPE and DB_PROG in configure.
484 kes Fix free of plugin_list when none exists.
486 ebl Apply accurate project patch.
488 ebl Fix a segfault when using strip_path option. (Use of pm_strcpy
489 on non-mempool object)
490 kes First cut of converting FD .status to work with bat API.
492 .status client=XXX header
493 .status client=XXX running
494 .status client=XXX terminated
495 kes Implement first cut of Copy Job.
496 kes Implement Catalog in Pool resource. It overrides catalog specified
497 in the Client resource.
499 kes Apply patch (with some difficulties) from Joao Henrique Freitas
500 <joaohf@gmail.com>, which adds support for libdbi as a Bacula
502 kes Add patch from Martin Schmid scm@apsag.com that checks to see if
503 ftruncate() actually works. In the case of some (cheap) NAS devices,
504 it does not, and so recycling NAS Volumes does not work. The code
505 simply unlink()s the file, then recreates it. This fixes bug #1011.
507 kes First incomplete cut of big malloc blocks for htable.
508 kes Tweak plugin code.
510 kes Plugin debug code + tweak a couple bat dialog layouts
512 kes Fix creating first JobMedia record during Migration to include
513 proper index. This caused slow restores of migrated jobs.
514 kes Temp fix to plugin name file_index.
515 kes Bacula backed up and restored a MySQL database.
517 kes Implement plugin restore.
518 kes Implement parsing of db_driver to give db_type index.
520 kes First cut of plugin restore code.
521 kes Fix bug #1047, which had a heap overrun when stripping certain paths,
522 and do not strip paths on symbolic links.
523 kes Set catalog backup database and user name from values specified on
524 the ./configure line.
525 ebl Fix #1031 about wrong pool source information in job report.
528 kes Remove a redundant jcr argument to find_files, match_files, and
530 kes Implement '.status dir header|scheduled|running|terminated' that
531 prints the requested status section. With the exception of the
532 header, the other reports have fields separated by tabs (\t).
534 kes Apply patch from Peter Much <pmc@citylink.dinoex.sub.org> that fixes
535 a resource embedded run command to find a since time if no explicit
536 since time was supplied on the command line.
537 kes Apply state-file.patch sent by Allan Black <Allan.Black@btconnect.com>
538 that updates the state file at job termination time in addition to
539 when the daemon terminates.
541 kes First version where a plugin did a backup.
542 bpipe-fd.so created a backup file, wrote a test
543 string to it, and Bacua could restore this fabricated file.
545 kes Implement DB Driver = string for the DBI driver.
546 kes Remove all old bdb_xxx.c code. Add dummy routines to bdb.c
547 kes First cut of code for loading Win32 plugin dlls. Implement
548 dlopen, dlsym, dlclose, and dlerror in src/win32/compat/compat.cpp
549 and implement a dlfcn.h file based on opengroup's definitions of
552 kes First cut plugin directives.
554 kes Apply patch from bug #1049 to prevent stripping the path on a
556 kes Attempt to fix bug #1047 where stripping a path corrupts the
557 heap. Waiting for feedback.
558 kes Correct the Mount message not to suggest labeling a new tape
559 when doing a restore. Submitted by email by John Stoffel.
560 kes Attempt to work around gcc FORTIFY_SOURCE bug that crashes the
561 FD by using casting. Reported in bug #1042.
563 kes A bit of crypto cleanup. More later.
565 Release Version 2.2.8
567 kes Apply patch from Martin to correct bug #1040, bscan sets existing
569 kes Fixed important spelling error in doc -- bug #1045.
571 ebl Fix bextract to be able to extract non-portable Win32 data to
573 kes Move initialization of read/write res lock earlier in the code.
574 This fixes the crash with a null conf file. This fixes bug
576 kes Redefine CURES in lib/parse_conf to be URES and move it all
577 into lib/parse_conf.c -- this responds to bug #1042, but does
578 not fix it. The fix is not to compile with FORTIFY_SOURCE.
579 kes Backport to 2.2.8 fix de-referencing a NULL pointer in the scanner from
580 the trunk SVN. I don't think this was reported as a bug.
582 ebl Fix a bug during tape initialization with MTSETDRVBUFFER.
584 kes Fix Win32 build with new .def files and DLL_IMP_EXP ...
586 kes Add DataDespooling and DataCommitting status (committing is
587 the last despooling).
588 kes Finish implementation of new reservations code noted below.
590 kes Fix bsnprintf for float point numbers. I broke recently when
591 parameterizing some variables. This fixes bug #1036.
592 kes Undo recent reservations changes ... will apply them later
593 when they work better.
595 ebl Fixes #1034 which cause mysql to hang the connection after 8h
596 ebl Change default statistics target of filename.name and path.path
597 fields for PostgreSQL. This speeds lookup by indexes. Thanks
599 kes A few more tweaks to new reservation code. Make sure to clear
600 vol released flag when retaking volume. When reading label and
601 label is bad mark volume unused. When recycling, mark volume
602 unused so it can be renamed.
604 kes Fix reserve_volume() so it doesn't release a volume in use
605 (i.e. a volume entry not marked released). This should be
606 the last part needed to fix bug #1018.
608 kes Move Heartbeat documentation from Job to Director resource.
609 This fixes bug #1033.
611 kes Fix existing switch drive SD code to call autochanger to release
612 any old volume. This must be done to keep the autochanger from
613 releasing subsequently newly reserved volumes in doing a close().
614 This should fix bug #1018.
615 kes Fail if attempting to get console input in batch mode. This
616 should help fail RunScript console commands that are incomplete.
617 kes First cut implementing switch_drive() in SD (not actually called).
619 kes Implement first cut running console commands in a RunScript.
621 ebl Fixes bug #1028 where 'Selection Type' option was not usable
623 ebl Fixes bug #897 and bug #1005 where bacula doesn't display runscript
626 Release Version 2.2.7
628 kes Add new free_tls() entry point so that Win32 builds.
629 kes Fix compile warning in src/lib/util.c
630 kes Fix entry point for edit_job_codes() so that Win32 builds.
631 kes Fix seg fault Frank Sweetser reports in regression testing
632 on his systems. The problem was that the original author of
633 bsnprintf.c did not take into account the side effects of
634 using ++x in the argument to a #define.
635 kes Make SD protocol backward compatible with version 2.2.x.
637 ebl Fixes bug #1015 where bacula failed to restore acl to a socket
638 because Bacula no longer restores sockets.
639 ebl Always use ignorecase fileset option on win32 FD.
641 kes Apply patch from Michael Stapelberg <michael@stapelberg.de>
642 that implements double quoting include names in conf files,
643 and also allows piping input by having the first character
644 be a vertical bar (|).
645 kes Apply patch from Bastian Friedrich <bastian.friedrich@collax.com>
646 that implement %f in RunScripts to pass the FileSet name.
647 kes Skip leading | when lex input comes from a pipe as suggested
648 by Michael Stapelberg <michael@stapelberg.de>.
650 kes Apply patch for bsmtp Win32 daylight savings time fix supplied by
651 Nerijus Baliunas <nerijus@users.sourceforge.net>
653 kes Implement Plugin Directory and plugin events.
655 kes Implement a security enhancement: TLS authentication but no
656 encryption. Enabled by setting 'TLS Authentication = yes'.
657 Note when this is on, TLS encryption is turned OFF!
659 kes This patch corrects a problem where the maximum concurrent storage
660 jobs counter gets out of sync during restore jobs causing jobs to
661 'wait on max Storage jobs'. This patch fixes bug #1009.
663 kes This patch fixes bcopy so that it produces correct Volumes.
665 kes This patch eliminates spurious output to the console during a VerifyVolume
666 job that contains encrypted data. It fixes bug #1024.
668 kes This patch prevents the 'status dir' command from trying to use a scratch
669 volume and possibly moving it from one pool to another. This patch fixes
672 kes Add new include to postgresql.c suggested by Marc Cousins so
673 that it compiles correctly with pgre version 8.3.
675 kes Fix --archivedir addition to configure. Replace it with
676 --with-archivedir in configure.in This fixes the regression
678 kes This patch fixes bug #1012 where the job is canceled because
679 of Max Run Time exceeded when the job has not yet started.
681 ebl Apply Richard Mortimer patch that fixes #1016 when there are more than
682 one 'part' to write. Instead of each part being stored on disk,
683 written to DVD, then deleted from disk, all parts are written to disk,
684 and only the last is written and deleted from disk.
685 kes This patch fixes the status command to include the formating string for
686 JS_AttrInsterting. It fixes bug #1021.
687 kes This patch should fix the Mac OS X build problem on the latest
688 Darwin, where sys/types.h was not included correctly (apparently
689 due to a change in the Mac headers). The solution was to explicitly
690 ensure that it is defined for the ./configure.
691 This patch also has a rebuild of configure that includes the Debian
692 qt4 patch to check for qmake-qt4. This patch fixes bug #1020.
693 kes This patch should ensure that queued messages to the console are
694 displayed as soon as possible. It should fix bug 1007, but has been
695 reported not to work.
697 kes This patch fixes the infinite loop when trying to increase the
698 maximum number of volumes in a Pool during the add command.
699 This patch fixes bug #1008.
701 Release Version 2.2.6
703 db Remove extra data on estimate command in joblist for bat.
705 kes Cleanup of code in SD that sets the LastWritten date. This doesn't
706 really change anything, but is the beginning of doing it *right*.
707 To do it completely right the LastWritten date must be passed to
708 the SD, but it is not yet done.
709 kes Minor tweaks to some bat restore SQL.
710 kes This patch fixes bug #1003 where putting the message output from
711 a Verify job into the catalog results in a recursive loop. The problem
712 seems to show up only with postgresql (to be verified).
713 kes Correct %x to %p in postgresql debug statement.
715 kes Fix bug #942 where lots of emails where generated when the heartbeat
716 interval was low and Bacula wanted a different tape from the one in
719 ebl Add new SD despooling attributes and Dir inserting attributes
720 job status codes in the catalog (Status table).
722 ebl Use qmake-qt4 instead of qmake when available (debian system).
724 kes Add a security warning to src/cats/make_catalog_backup.in indicating
725 that passing the password via the command line (arg 3) is insecure.
726 This responds to bug #990 (it doesn't fix it).
728 kes Set default debug_level to zero. This corrects bugs #991 and #993.
729 kes Fix a crash in bat when it cannot connect to the Director for example
730 if the Director is not running.
731 kes Remove redundant INDEX (JobId) from File table in the trunk.
733 kes Make explicit exception to GPL in LICENSE to permit linking
734 the Win32 FD with Microsoft VSS code.
735 kes Apply the Solaris package patch from
736 Masopust, Christian <christian.masopust@siemens.com>
737 kes Apply the patch to optionally add a timestamp in the debug output
738 submitted by Mariusz Czulada <manieq@wp.eu>.
740 ebl Use PQerrorMessage instead of PQresultErrorMessage in postgresql
741 backend (sql_strerror). Fixes bug #989
743 kes Apply Michael Short's <mdshort@gmail.com> Win32 regress patch.
744 It applied with no problems.
745 kes Add PATH command to SunOS part of mtx-changer.in so that sed and
747 kes Redirect stderror to stdin on mt status command in mtx-changer.in
748 since the status is returned on stderr on Solaris.
749 kes Activate Close button on tray-monitor window. This fixes
751 kes Check for NULL item in parse_conf.c before calling it. In the
752 case of Device, there is no item and this caused a seg fault when
753 Device appears in the conf file.
754 kes Add a #define __CONFIG_H when including config.h in bacula.h. This
755 avoids pulling in config.h multiple times in some new code.
757 kes Fix spurious warning message printed when creating a volume with
758 a LabelFormat. This fixes bug #976.
760 Release Version 2.2.5
762 kes Add JobId in place of Job name in all the Jmsg() output.
763 kes Correct the APP_DESC for the Win32 storage service (remove an e).
765 kes Make maxvol-test and new more strict maxvol2-test work.
766 kes Print JobId in all Jmsg() job output.
768 kes Add new SD despooling attributes and Dir inserting attributes
769 job status codes. This fixes bug 961.
770 kes Fix Win32 drive display in bat version browser. Fixes bug #962.
772 kes Fix doc issue. This fixes bug #963.
773 kes Fix listing performance problems in bat. Pointed out by
775 kes Remove old debug code.
776 kes Fix bat code that tests for Win32. This should fix bug #968
777 kes Query 5 list wrong Vol after migration. This fixes bug #960
779 ebl Fix #969 where user can't change Replace option in restore menu.
781 kes Save jcr in thread specific data (tsd) for each thread.
782 kes Make Dmsg() print JobId as -%u.
783 kes Make Jmsg, Emsg, and others automatically pickup the jobid
784 for the thread if it exists.
785 kes Remove old reservation debug jid code.
786 kes Remove get_jcr_from_tid() from OpenSSL and tls code.
787 ebl Add an option that permit to specify spool size in job
788 definition. (Applying patches/testing/spoolsize_per_job.patch).
789 You must upgrade SD and DIR at the same time.
790 dvl Add new configuration item --archivedir
791 dvl Adjust regression tests to use tmp not /tmp. This will allow
792 multiple concurrent runs of the regression tests.
794 kes Fix race condition that drops final block written to volume.
795 This happens in rare cases with multiple simultaneous jobs
796 when the Volume fills. This fixes bug #964. May be related
797 to bug #935 and possibly #903.
798 kes Eliminate more strerror() and replace with bstrerror().
799 kes Remove BSD getopt and replace with unrestricted IBM version.
800 kes Fix Win32 build for changed calling sequences.
801 kes More tweaks to the mount volume routines to get everything
802 right. Changed variable name from find to have_vol, which is
803 much easier to understand.
804 kes Enhance btimer debug code.
806 kes Fix FD->SD authorization failure, which was due to spurious
807 wakeups from a pthread_cond_timedwait(). Simply check the
808 predicate before continuing. This fixes bug #953.
809 kes Add const char where needed (more to do). Remove temp debug code.
811 kes Setup SQLite busy handler before doing queries. Fixes bug #967.
812 kes Don't overwrite error message in check_tables_version.
814 kes Unlock batch insert tables with same calls used elsewhere.
815 kes Allow starting 59 jobs a second.
816 kes Make SD session key more random.
817 kes Add retry for SQLite opening db if it fails. Probably helps
819 kes Suppress extra error messages during batch insert failure.
821 kes Add jcr to timer packets so if killed message can be sent to job.
822 kes Add JobId to all Dmsg() output.
823 kes Put some FD auth code on dbglvl rather than fixed.
824 kes Return insert attributes error message in db msg buffer to avoid
825 false error messages. Helps fix bug #966.
826 kes Separate batch init error messages. Probably helps fix bug #966.
827 kes Make SD code that contructs attribute insert check string lengths
829 kes If Dir gets an error during inserting attributes, cancel SD.
830 This reduces unnecessary error messages.
832 kes Correct search boolean for getting Volume info
833 ebl Cleanup batch insert code. Probably fixes bug #965.
834 kes Back out one small change to the reservation system (reserving a volume).
835 kes Rework how a Volume is mounted. It is now much more intelligent and
836 will always attempt to use any mounted volume if possible and reduces
837 calls to the Director asking about volumes.
839 kes Turn off some code when batch insert not enabled.
840 kes Edit FD name in connect error messages.
841 kes Rework the reservation system to take into account that the Director
842 might give us a Volume that is different from the current one being
843 used, and to ensure that we don't exceed Maximum Volume Jobs.
844 This fixes (mostly) bug #947 ' Maximum Volume Jobs = 1 produces
845 fatal error with multiple jobs running'
846 kes Add more debug code in reservation system.
847 kes Implement maxvol-test to check bug #947.
849 kes Add code to handle tray monitor separated from Win32 FD.
850 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
852 kes Add missed return in fixing verify bug -- trunk only.
853 ebl Fix a command parser issue causing a director segfault.
854 kes Fix ANSI tape labeling. Fix restoring ANSI labeled Volumes.
856 kes Increase the max block size to 4MB fixes bug #957.
857 kes ERABT if user sets min block size > max block size. Fixes bug #956.
858 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
859 is not properly mounted (recognized) during a poll.
860 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
861 Job that has differences reports Verify OK.
862 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
864 ebl Add an option to operate on all pools with update vol parameters.
865 This complete the project 20. Patch from Nigel Stepp.
866 ebl Add history support to bconsole when using readline.
867 Using Ctrl-D to exit doesn't update .bconsole_history
868 kes Modify new volume algorithm to use max MediaId for generating next
869 volume number rather than the count of Volumes. This should essentially
870 eliminate the failure rate if some volumes were deleted. Bug #921.
871 kes Begin implemention of Optimize Job Scheduling.
872 kes Implement restore callback that Dirk and I agreed on for bat
873 restore. This fixes bug #928. Restore of backup of zero files fails.
874 kes Fix SQL Catalog logging which broke with new db_escape_string
877 Release Version 2.2.4
879 kes Fix bacula_cats.def for new db_escape_string().
880 kes Increase size of name string when FD making connection to SD.
881 May fix bug #953. FD->SD connection failure.
883 kes Add code to help Dan debug 2drive-incremental-2disk test.
884 kes Add code to try to fix bug #908.
885 kes Add waits to multiple exit detection code to try to force pid
886 file to always be deleted.
887 kes Restore good dev.tar.gz to rescue set appropriate binary property.
889 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
890 trying to switch drives by checking for blocking before unblocking.
892 kes Cancel storage daemon in all cases where FD reports error. This
893 should fix virtually all cases of bug #920.
894 kes Fix db_escape_string() for MySQL which did not compile.
896 kes Fix error message that was clobbered when Dir tells SD it does not
897 have write permission on Volume. This should fix a minor point
898 in bug #942, but not the main problem.
899 kes Add code to cancel job in SD if FD connection fails. This should
901 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
902 dvl Pass jcr and db into db_escape_string() to enable better escaping
904 kes Fix migration code to get correct Volume name with multiple volumes
905 by skipping |. Fixes bug #936.
906 kes Implement patch supplied by Landon to fix bug #944 where using
907 TLS with bconsole uses 99+% of the CPU.
908 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
910 kes Move patches into patches directory.
912 ebl Fix bug #946 about 'bacula-dir -t' which doesn't works
915 ebl Using 'm' in bconsole will show messages like before,
916 and not memory usage.
917 kes Fix bug #935, and probably also bug #903 where files were not
918 restored. MediaId was not properly set in JobMedia record after
921 kes Suppress chown and chmod error messages if the FD is not running
924 kes Apply Martin Simmons' patch that should turn off the new API usage
925 when batch insert is turned off allowing building on older
927 kes Add ./configure search in qwt-qt4 for qwt package
929 kes Bacula is now free of 3rd party GPL copyrighted code!
931 kes Add guid_to_name.c/h which replace idcache.
932 kes Remove enh_fnmatch.c. Make code that references it use fnmatch.c
934 ebl Detect if new PosgreSQL batch insert API is present.
935 kes Correct incorrect mempool call causing Director crash. Occurs on
936 systems without va_copy().
937 sb Update spec files for 2.2.1 release
939 kes Fix memory pool call in ua_output.c. bug #934.
940 kes Replace fnmatch.c and fnmatch.h by modified BSD versions.
941 Add test program to fnmatch.c
943 kes Integrate patch to README.vc8 from
944 Hederer Jean-Sébastien <hedererjs@asperience.fr, had to manually
945 edit it to get it into Unix patch format.
946 kes Implement mkpath.c to replace old FSF makepath.c
948 kes Implement savecwd.h and savecwd.c. Remove FSF versions.
950 Release Version 2.2.1
952 kes Update POTFILES.in
953 kes Cleanup a few underquoted AC_DEFUNs in configure
954 kes Apply patch from Martin Simmons that adds a test for va_copy to
957 kes Fix bug #921 by increasing the number of tries to create a new volume
959 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
960 can be called multiple times. Implement a version for machines
961 without va_copy() that gets a big buffer.
963 kes Integrate more portable zone offset code into bsmtp.c
964 Submitted by Attila Fülöp.
966 kes Fix bad SD->FD return status reported by
967 (James Harper) <james.harper@bendigoit.com.au>
968 ebl Fix a bug in read_close_session which return random status
969 thanks to James Harper
971 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
972 and directory names during restore of single file/directories.
973 kes Add sanity checks to .sql command when string is empty. Hopefully
974 that will resolve Dirks Director crash.
976 kes Apply patch submitted by Martin Simmons that corrects a seg fault
977 in the bsmtp chat subroutine when debug is >= 10.
979 kes Fix Director crash when running bat SQL queries.
980 kes Add David's notes on Item 8: Copy pools.
982 kes Rework projects file to be current and ready for a vote.
983 kes Enhance lex scanner error message.
985 kes Tweak LICENSE file to mention BSD code.
986 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
987 if specified on the ./configure.
988 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
989 This class is intended to allow us to open a second bsock to the
990 Director while in the restore subdialog.
992 kes Fix configure to create bat Makefile before creating dependencies.
993 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
994 kes Add a tooltip to the tray monitor.
995 dvl Set the Director's PID file before dropping privs. This fixes
998 kes Update AUTHORs file
999 kes Increase the default max concurrent jobs to 20 in FD and SD to
1000 correspond with the default .conf files.
1001 kes Rewrite the Win32 service routines. This eliminates the 3 copies
1002 some different, of the same file created by RN when porting the
1004 kes Rearrange some of the Win32 directories and the placement of the files
1006 kes Set DEVELOPER flag in version.h
1008 ========================================================================
1009 Release Version 2.2.0
1011 kes Apply a second doc patch from Marc.
1012 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
1013 improves the tips section that discusses how to setup multiple
1016 kes Update bat README file.
1017 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
1018 corrects a typo in the Recycle status check in db_find_next_volume().
1019 This will probably fix a number of annoying problems with multiple
1021 kes Modify most of dird/msgchan.c to use bsock class calls rather than
1022 bnet calls -- no functionality change.
1024 kes Modify the Verify output to specify if files are missing on
1025 the Volume(s) or disk. Fixes confusion in bug #916.
1026 kes When more than one Volume is read in a migration job, the last
1027 Volume bytes reported are from the last read volume rather than
1028 the last written volume. Fixed. This fixes bug #910.
1029 kes Fix display of Recycle flag after update volume=foo recycle=yes.
1030 It previously printed New Recyle flag is: no. This fixes bug
1033 kes Correct seg fault when switching tape drives during restore.
1034 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
1035 be used until after 2.2.0 release.
1037 kes Remove fnmatch() in SD that permitted wild card specifications.
1038 This fixes bug #914.
1040 kes Fix %g in filename returned by SQL for browse tree reported by
1042 kes Fix configure so that it puts config.out in the cwd rather than
1044 kes Attempt to fix the locking problem reported by Eric in bug #906.
1045 kes Make berrno class to leave errno unchanged after constructor call.
1046 kes Make bnet_server use the heap rather than the stack to allocate
1047 its socket fd pointers to avoid a crash at termination. Problem
1048 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
1050 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
1051 and putting it in depkgs-qt along with Qt4.3.
1053 kes Rework code in acquire.c that switches drives for reading when
1054 the Media Type does not match. This should fix bug #906
1056 ebl Fix a director segfault during job setup #907
1057 kes Correct seg fault in postgresql when first operation returns no
1058 rows. Fixes Dirks File browser problem seg fault with bat.
1060 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
1061 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
1064 kes Implement PopUp YES/NO dialog for bat.
1066 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
1068 kes Correct RunScript to terminate job in FD on failure.
1069 kes Change abort_on_error and AbortJobOnError to fail_on_error
1070 and FailJobOnError in RunScripts.
1071 kes Minor tweaks of code formating in RunScripts, principally to
1072 avoid depassing 80 columns.
1074 kes Eliminate one #ifdef Win32 in bsmtp
1075 kes Implement grow tool to grow a file for testing very large databases.
1076 kes Add big-vol-test to test Bacula seeking with > 5GB.
1079 kes Modify find_next_volume() to return all values in Media record.
1080 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
1084 kes Update Release notes
1086 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
1087 Warning, in previous beta version, all media get from scratch keep their
1090 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
1091 This should fix bug #842. Made a note to look at removing the temp
1092 files at the end of the install.
1093 kes Add ability to mount and unmount a file device providing it is
1094 marked as being removable and has the appropriate mount and unmount
1095 commands defined in the Device resource. This fixes bug #830.
1096 kes When applying a storage override, release all previous storage
1097 definitions rather than just prepending the new storage.
1098 This should prevent a good deal of confusion.
1100 kes Implement ./configure search for qwt libraries.
1102 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
1103 Win32 FD. This should fix bug #893.
1104 kes Remove an unnecessary beep in Win32 init code.
1105 kes Update copyright dates in Win32 executable about boxes.
1106 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
1107 code with a BSD getopt.c and getopt.h.
1108 kes Remove sched.h from the Win32 compat directory -- not used.
1109 kes Remove the Exit menu item from the Win32 tray monitor. If you really
1110 need to shut it down, do it through the services panel or the command
1112 kes Remove some inappropriate Bacula FSFE copyrights.
1113 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
1114 kes Fix regress config non-portable test as pointed out by
1115 Florian Heigl <florian.heigl@gmail.com>
1116 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
1117 as pointed out by Florian Heigl <florian.heigl@gmail.com>
1119 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
1120 Reported by Frank Sweetser.
1124 kes Fix client-only build.
1125 kes Integrate client-only fixes for bsys (initgroups) and conio from
1126 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
1127 kes Make arguments to get_scratch_volume() in same order as other
1129 kes Rework the prune_volumes() subroutine so that after purging and
1130 no volume found in desired pool, it will check for a scratch
1131 volume. This prevents recycling the whole scratch pool.
1132 kes Add code to status storage to print boffset_t (largefile support).
1134 kes Move qwt (Graphics libarary for Qt4) to depkgs.
1135 kes You now need a --with-qwt=<dir> to be able to build bat.
1136 kes Update src/win32/cats/bacula_cats.def to include the new
1137 db_get_query_dbids() call on Win32.
1139 kes Correct a problem when selecting a scratch volume and moving
1140 it to another pool that lost some columns.
1141 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
1142 kes Enhance Autochanger error messages to include Volume and device name.
1143 kes Rework prune_volumes() code to take account of InChanger flag,
1144 and to handle recycling volumes going to the Scratch pool and
1145 current pool because the RecyclePool directive.
1146 kes Implement a better and more efficient db_get_query_dbids() to
1147 handle creating and passing back a list of DBIds.
1151 kes Start work on new more efficient DBId subroutine. First use
1152 will be for recycling volume to Scratch inchanger.
1153 kes Increase number of JobIds in pruning from 1000 to 10000.
1154 This to be replaced by above routine.
1155 kes Begin implementation of building Qt4 on Win32.
1156 kes Correct typo in fix I added for bad TLS shutdown.
1157 kes Pull 2.0.3 patches into patches directory.
1158 kes Update Release notes. Include qt-console in line count.
1159 kes Update Projects file.
1161 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
1162 bug in migration code where a job that spanned two volumes
1165 kes Implement new BST_DESPOOLING blocked state. Change from locking
1166 during despooling in SD to blocking. This means that other threads
1167 can work with the device structure, in particular the reservations
1168 system while despooling.
1170 kes Fix return in reservation message queue that missed clearing
1171 the jcr lock (implemented 26Jun07 below).
1172 kes Rename a number of dev methods to make locking function names
1174 kes Document locking in lock.c. Move lock structures to new file
1177 kes Move reservations message lock to lock jcr only this
1179 kes Move main SD locking code into lock.c (new file).
1180 kes Update Win32 build to include lock.c
1184 kes Dirk committed the qwt library code for drawing graphs in bat.
1185 kes Tweak install of qwt so that it is integrated with ./configure.
1187 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
1188 out by Eric (my typo).
1189 ebl Fix configure.in to get batch mode enable
1190 kes Return correct string from authenticate.cpp in bat when connecting
1192 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
1193 spurious line drops when using TLS.
1194 kes Do not file reparse points when restoring a file that already
1197 kes Implement Windows reparse points -- similar to directories, but
1198 we do not descend into it. This is a first cut. They seem to
1199 be backed up, but restore is not yet tested.
1200 kes Remove restore_blocking in tls code when shutting a socket to leave
1201 it in blocking mode. Hopefully this will fix the encryption bug
1202 reported by Frank Sweetser.
1203 kes When opening a file for backup, tell the OS that we are going to
1204 read it sequentially -- optimization.
1205 kes Change variable names in authenticate_director() to not conflict
1206 with member names in bat. Caused great confusion with compiler,
1209 kes Queue openssl error messages in case of comm problem.
1210 kes Do shutdown() call if socket terminated.
1211 kes Remove some duplicated code in tls.c
1212 kes Move more of the bsock member variables into private and access
1214 kes Add Frank Sweetser's tls-test to the regression suite.
1216 kes Add Swedish sv.po file
1218 kes Don't print clock skew message in FD if less than 3 seconds diff.
1219 kes Add a bit of VSS info to status client.
1220 kes Implement a first cut of Vista VSS, using Win2003 code.
1222 Release: 2.1.20 beta
1224 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
1225 loaded tape but uses first drive).
1226 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
1227 This was indeed a Win32 issue.
1229 kes Simplify search of autochanger for in-use Volume.
1230 kes Fix exit condition of check for in-use volume. kes Remove
1231 inappropriate my_postgresql_free_result() in db_close()
1233 kes Fix bad return in FD when encryption signature not found.
1234 Probably caused a crash.
1235 kes Inhibit missing encryption signature error messages for
1236 file types where no signature computed.
1237 kes Correct inverted check on autochanger in reservation system.
1238 kes Tweak debug code in autochanger reservation.
1240 kes Add some additional locking in the cats directory in subroutines
1241 that modify packet variables called from batch insert.
1242 kes Rework how dcrs are allocated. new_dcr() can now be called
1243 with an existing pointer, and it will simply clean it up.
1244 This allows the reservation system to test various different
1245 devices, and will permit easy device changes.
1246 kes A bunch of changes all over to handle new new_dcr() calling
1248 kes Work more on the Volume management in the SD. Remember Volumes
1249 for tape drives and for autochangers (even virtual disk changers).
1250 kes When looking at the Volume list to reserve a drive, handle
1251 autochanger names correctly by interating through the changer
1252 devices. Also call the Director to see if a Volume is suitable
1253 for the current job.
1254 kes Fix some bugs in bscan. Make sure all media records are written.
1255 Make sure that valid JobMedia records are written for disk files.
1256 Previously they were completely wrong.
1257 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
1258 that the URLs don't change and so that the developers will all
1259 work off the same copy. Rebuild from scrach.
1260 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
1262 Release: 2.1.18 beta
1264 kes Fix seg fault in FD from incorrect digest size.
1265 kes Fix argument to non-OpenSSL crypto.c subroutine.
1267 Release: 2.1.16 beta
1269 kes Remove a few malloc()s from the encryption code.
1270 kes Use the class calls to bsock in filed/backup.c and restore.c in
1271 place of the old bnet_xxx code.
1272 kes Implement code that does an on the fly calculation of the
1273 signing digest during restore of encrypted files. It makes
1274 a best guess at the algorithm, and if it is not correct, will
1275 then revert to the old code which reads the file after it is
1277 kes Implement at least one missing crypto stream in stream_to_ascii()
1278 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
1279 #877 where a reload with bad syntax causes Dir to exit.
1281 Cut: 2.1.14 beta (not released)
1283 kes Do not free a volume on a tape drive until another volume is
1284 mounted and read, or the autochanger unloads the volume.
1285 This should help the SD re-use volumes that are already mounted,
1286 and should fix bug #886.
1287 kes Apply patch from user brettedgar that allows gnome2-console include
1288 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
1289 kes Apply patch from Lucien Weller that fixes day of week calculation
1290 because of DST flag problem. Fixes bug #887.
1292 kes Move find_next_appendable_volume() to after acquiring a valid device
1293 in reserve.c. This fixes bug #864 -- confirmed by reporter.
1295 kes Unable to reproduce bug 872. However added additional testing for
1297 kes Bug #874 resolved by documenting SQLite limitations.
1298 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
1299 kes Bug #881 resolved by removing typo in mtx-changer script.
1300 kes Made Frank Sweetser's wiki the official Bacula wiki with his
1301 approval. Added a link to the wiki on the web page, and implemented
1302 a backup from http://paramount.ind.wpi.edu
1304 kes Fix update allfrompool to pass pool name.
1306 kes Convert to pure GPL v2 license.
1307 kes Fix sscanf problems reported by Peter Buschman that caused
1308 a bus error on Solaris.
1309 kes Rework (simplify) the select prompt in bat.
1310 kes Move get_jobid_from_tid() into lib and create a
1312 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
1313 should definitely fix the problem of lost error messages in the
1315 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
1316 kes Eliminate tcpd.h from the project. Enclose the #include from the
1317 library with extern C ...
1318 kes Add print of signal name when a signal is trapped.
1320 Release: 2.1.12 beta
1322 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
1324 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
1325 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
1326 makes SQLit3 run 30 times faster, though a bit less safe.
1327 kes Implement --with-batch-insert in configure and detection of thread
1328 safe libraries. It is on by default, but turned off if no thread
1329 safe library (e.g. SQLite 2) is available.
1331 kes Fix Bacula PostgreSQL buffer overruns.
1332 kes Do better checking for NULL results returned from PostgreSQL;
1333 implement retry for failed queries; clear results buffer after
1334 failed query. Hopefully this will correct the PostgreSQL failures.
1336 kes Implement algorithm to handle only one appendable volume with
1337 Prefer Mounted Volumes = no.
1338 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
1339 returned from a query.
1340 kes Make volume lock recursive.
1341 kes Implement an additional volume reservation algorithm that
1342 starts by considering all reserved volumes then uses the
1343 old brute force algorithm of searching the resources to
1344 find a suitable device.
1345 kes Add new reservations debug code and refine the old code.
1346 kes Update the win32/dll/bacula.defs file.
1348 kes Tweak reservations algorithm to permit a few more cases, i.e.
1349 volume reserved, but on different drive, ...
1350 kes Enhance SD status to include Pool and Media Type for drive in a
1351 more readable format (a bit longer).
1352 kes Fix PostgreSQL double free.
1354 kes Minor refactoring of restore decryption code.
1355 kes Add code to smartall.c to detect double free of a buffer.
1357 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
1358 so that bsmtp will create a correct email address (mailbox only).
1359 kes Modify 'memory' command so that the buffers are listed as 'In use'
1360 to avoid confusion with Orphaned buffers.
1361 kes I reworked the OpenSSL include/lib flags to be handled in
1362 the standard Bacula way, which should fix bug #863 concerning
1363 non-standard OpenSSL libraries.
1365 kes Implement Help Browser window for bat.
1366 kes Fix reload bug that reset StorageId to zero.
1368 kes Fix TLS #ifdefing when TLS turned off.
1369 kes Ensure that when labelling a tape with Slot=0 that InChanger
1371 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
1373 kes Add StartTime to final uar_sel_jobid_temp query so that we can
1374 add DISTINCT (required by PostgreSQL).
1375 kes Implement BSOCK authenticate_director() method. Eventually will
1376 authenicate all daemons.
1377 kes Move several more functions into the BSOCK class.
1379 kes Add code to tell the OS that we no longer need a cached
1380 file that we were reading. In findlib/bfile.c. Also,
1381 only cache files that we are reading. Thanks to
1382 Tobias Oetiker <tobi@oetiker.ch> for the idea.
1383 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
1384 kes Implement script to automatically generate cats and dll .def
1385 files for Win32 dll.
1386 kes Update README.mingw32 to include new .def file generation.
1387 kes Correct typo in UTF-8 error message as reported by:
1388 jhernandez <julianhernandez@gmail.com>
1389 kes Add additional sm_check() code on debug level 1.
1390 kes Set default debug level to 1.
1391 kes Trap SIGABRT in attempt to get traceback.
1393 kes Reduce bat connect timeout from 30 to 15 seconds.
1394 kes More restructuring and implementing BSOCK class in place of
1396 kes Remove a few unnecessary malloc() tests in crypto code.
1397 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
1398 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
1399 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
1401 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
1403 kes Fix Verify InitCatalog. The attributes were not pointing to the
1404 correct saved location.
1405 kes Implement message callback so that GUI is sure to get all
1406 daemon messages. Currently displayed in a dialog in bat.
1407 kes Ignore SIGUSR2 (Bacula timer) in bat.
1408 kes Apply regress patch from bug #859 to allow regress to work
1409 with Solaris compiler.
1411 kes Begin adding TLS support to bat.
1412 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
1413 clean up lex.c and make it more readable.
1415 kes Move more bnet functions into the BSOCK class.
1416 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
1417 kes Complete change of berrno strerror() method to bstrerror()
1419 Release: 2.1.10 beta
1421 kes Cleanup incorrect email addresses in bsmtp.
1422 kes Make bat display initial messages rather than discard them.
1424 kes First cut of adding .mod to the run command.
1425 kes Implement auto display of messages in bat.
1426 kes Enhanced preferences to allow all Bacula output to be
1429 kes Try to make bsmtp date routines more generic.
1430 kes Fixed bug #856 autochanger documentation.
1431 kes Rework bsmtp date editing for Win32. This fixes bug #854.
1432 kes Add new cats entry point so Win32 builds.
1434 kes Attempt to fix bsmtp date editing on OSes without %z editing.
1436 kes Do better checking for the MySQL 64 bit libraries looking for both
1437 .a and .so libraries.
1438 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
1439 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
1440 kes Require the thread safe version of MySQL during configure. Thanks
1441 to Andre Noll for pointing this out.
1442 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
1443 continuing in migration code.
1444 kes Apply implementation of tray-monitor font derived from gnome-console
1445 submitted by Andreas Piesk <a.piesk@gmx.net>
1447 kes Eliminate important memory loss in SQLite
1448 kes Fixed the batch insert MySQL thread specific data that was not
1449 being freed. See cats/mysql.c:db_thread_cleanup().
1450 kes Fix restore before command.
1451 kes Convert old hdr.name to name() in a few places.
1452 kes Implement update jobid command.
1453 kes Return all time_t dates in db_get_job_record()
1454 kes Stop watchdog in SD earlier.
1455 kes Put Pool just after Storage in please mount message.
1456 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
1459 kes Update the po files.
1460 kes Fix Verify InitCatalog by making it cache attributes.
1462 kes Change name bacula-bat to bat for man 1 page to correspond to
1464 kes Check for client and store NULL pointers in status command. This
1466 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
1467 kes Fix sign extended editing of %p.
1468 kes Clean out a little old #ifdefing in cats/mysql.c
1470 kes If time diff between DIR and FD is more than 600 seconds convert
1471 INFO message to WARNING.
1472 kes Implement heap size display in status for all daemons.
1473 kes Attempt to fix MySQL db open memory loss (not successfull).
1474 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
1475 kes Eliminate memory loss in MySQL (possibly other SQLs) during
1476 Query. This looks like a MySQL but but by doing extra releases,
1477 the memory goes away. This should fix bug #847.
1479 kes When backup fails, cancel SD before waiting for sd termination.
1480 kes If SD is waiting for FD to connect during cancel, wake up the
1482 kes Fix fsf code so that errno is correctly reported.
1483 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
1485 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
1486 so that Bacula doesn't later stumble into a seg fault.
1487 kes Use the term Restore Client in the restore Job report.
1488 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
1489 the original job's FileSetId.
1490 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
1491 spooling in migration jobs. Not yet tested.
1492 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
1493 reading conf file from a pipe. However, do it with open_bpipe()
1494 rather than popen. Not yet tested.
1496 kes Fix an ugly bug where the VolCatBytes were getting updated
1498 kes Implement bconsole memory command that prints current memory
1499 usage, plus smartalloc dump.
1500 kes Clarify some error messages in backup, admin, and migrate.
1501 kes Shrink label dialog to smaller size.
1502 kes Invert Cancel OK buttons on restore to be OK Cancel.
1503 kes More strerror() to bstrerror() conversions.
1505 kes Start implementing bstrerror() in place of strerror().
1506 kes Stripping path -- seems to work.
1508 kes Prevent door and port files from being restored (mostly
1510 kes Free an unreleased buffer in compat code.
1511 kes Change console Job name from *Console* to -Console- to eliminate
1512 Win32 filename problems. Put Win32 path separator when creating
1513 Console file. This fixes bug #846.
1514 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
1516 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
1518 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
1519 to force Win32 error message.
1521 kes First cut strip path. The data should be passed to the FD,
1522 but nothing is done with it yet.
1523 kes Enhance the digest and signature routines in the crypto
1524 library to accept a JCR and to use it to print error messages
1525 so that they will go in the Job report rather than the daemon's
1527 kes Simplify some of the verify signature code.
1528 kes Simplify a few of the alternative returns in the signature
1531 ebl Use only POSIX regex instead of GNU regex in breg.c for
1532 File relocation. It fix broken freebsd compilation.
1533 kes Convert all other Dir files to use new ua class message
1535 kes Tentative fix for missing digest signature in bug 807.
1536 kes Correct handle problem in new win32_ftruncate routine.
1537 kes Convert ua_purge.c and ua_update.c to use new ua class
1538 message routines for bat.
1540 kes Correct incorrect installation of LICENSE in Win32 installer.
1541 kes Display LICENSE at the beginning of the Win32 install.
1542 kes Attempt to correct the need for the png files to be installed
1544 kes Reapply my bat.conf install script in qt-console. I think I
1545 editted bat.pro instead of bat.pro.in and it was lost.
1546 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
1547 the /var/lock/subsys for subsysdir. Also corrects typos in the
1550 kes First cut update job.
1551 kes Correct configure to include qmake of src/qt-console directory.
1553 kes Make restore job yes/mod/no print in one command so GUI works.
1554 kes First cut implementing backup and restore client.
1555 kes Correct editing in Verify output that caused a seg fault.
1557 kes Insure that bat.conf is not overwritten during installation.
1558 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
1559 while I was implementing migration in March 2006 !
1561 ebl Cleanup file relocation, using char *RegexWhere instead of
1562 char *where + bool where_use_regexp
1563 kes Update some manpages and add bat manpage.
1564 kes Make a first cut at converting bacula.spec.in for bwx-console
1566 kes Apply patch from John Goerzen to add hostname as fourth argument
1567 to make_catalog_backup script.
1568 kes Fix typos I introduced into bsmtp.c
1569 kes Make pm_strxxx() routines handle input of NULL pointer. This
1570 is to protect from NULL pointers returned from SQL databases.
1571 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
1572 kes Add more debug to FIFO code -- fix fifo regression test.
1574 kes Implement posix_fadvise in FD, and for reading spool files in SD.
1575 kes Add thread timer to bnet_connect() to break from OS if wait time
1578 kes Update Win32 build to include new files, new symbols, and
1580 kes Implement socket level heartbeat (tcp_keepidle)
1581 ebl Commit File relocation patch
1582 kes Make bat have 'make install' target.
1583 kes Warn during install if old gnome-console binary found.
1584 kes Warn during install if old wx-console binary found.
1585 kes Add -8 option to bsmtp command line to add content type utf-8.
1586 Fixes bug #809. (Character coding problem in bsmtp).
1587 kes If < is found in target (from, to, cc) then do not enclose the
1588 target in < > in bsmtp. Fixes bug #772 (malformed address).
1589 kes When printing certain items in dbcheck, stop after 300000.
1590 Fixes bug #822. (dbcheck loops).
1591 kes Incorrect status in Dir after waiting for mount with poll set.
1594 kes Extend idea of Prefer Mounted Volumes to mean a volume about
1596 kes Print waiting to reserve a device every 5 mins.
1598 kes Don't call close_part in label.c if tape and relabel.
1599 kes Don't free volume if busy in close() -- should help with
1601 ebl Fix #824 RunScript bug (After script could be execute twice)
1602 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
1603 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
1604 Add a regression script to test RunScript
1606 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
1609 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
1610 deprecated. No additional bugs will be fixed, and they will be dropped
1611 in a future release (probably 2.4.0).
1612 kes Change name of wx-console to bwx-console to make it more Bacula
1614 kes Change the name of gnome-console to bgnome-console to make it
1617 kes Some time in March, a Feature Request with patch from Jorj Bauer
1618 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
1620 The ability for the director to validate a Client (FD) CN against
1621 an arbitrary set of patterns rather than the hostname, with
1622 A new 'TLS Allowed CN' set of directives which are implemented
1623 in the Client resource. Then pattern matching is used in place
1624 of hostname matching against the Certificate's CN. As an example, we
1625 have certificates which (a) use a local CA, and (b) have a CN of the
1627 kes Add new/changed entry points to Win32 build
1628 kes Create unaccepted-projects for projects that are not accepted.
1629 kes Simplify locking in the reservations system.
1630 kes Add more debug code in reservations.
1631 kes Make sure error condition on reserving a volume is handled correctly.
1632 kes Correct handling of volume_in_use.
1633 kes Correct handling of initializing a device.
1634 kes Move handling of broadcasting releasing a device into release_device().
1635 kes Correct attaching dcr to dev so that it is only done if device
1636 is properly initiated.
1638 kes Locking debug level tweaks in SD.
1639 kes Tweak new Volume code.
1641 kes Add exec external-command [wait-seconds] to bconsole. This
1642 executes the external-command. Note! normally external-command
1643 should be enclosed in double quotes.
1644 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
1645 it should normally be off in a production system.
1647 kes Implement die command for SD so that we can force it to dump.
1648 kes Implement SD lock debug code.
1649 kes Implement new algorithm for keeping Volume list in SD. It
1650 is now owned by the device.
1652 kes Implement new code for freeing in use volumes that should
1653 resolve if not all, some of the problems of multiple drive
1654 tape conflicts described in bug 801.
1656 kes Fix gui/bacula-web/images files in svn.
1657 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
1659 ebl Fix a bug in batch mode (in string escape)
1660 kes Correct migration prune SQL typo that crept in in a
1661 recent 2.1.x change.
1663 kes Move bnet_despool() into class in bsock.c
1664 kes Modify job report to include director name and Build OS.
1665 kes Move drop root privilege and check_catalog() before fork.
1666 kes Add update database scripts (version 9 to 10) to updatedb directory.
1668 ebl Check size and age of each file after its backup to see if
1669 it has changed during backup, if 'checkfilechanges' is set.
1670 The FD will do an extra check (stat(2)) after
1671 each file backup. mtime, ctime and size are compared with
1672 'before backup' information. If time or size mismatch, an
1673 error message will be generated. You must upgrade FD to use it.
1675 kes Make database name and user configurable
1676 --with-db-name=xxx --with-db-user=xxx
1677 kes Add back database type to message.c for debugging.
1679 kes Implement dir_sql() which issues an SQL query.
1680 kes Modify bat medialist to use dir_sql() and do some minor C++
1681 formatting as well as eliminating a number of pointers, simplifing
1684 kes Fix some of the mtx-changer grep commands for tape label readers.
1685 kes Convert a number of bsendmsg into the appropriate send/warning/error
1686 message class calls.
1687 kes Suppress the using database message in the .sql command.
1688 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
1690 kes Add context menu for floating a window.
1691 kes Some minor cleanup and name changes in qt-console
1692 kes Add doing mt setblk 0 in Win32 mtx-changer.
1693 kes Apply Martin's bug fix to move definition of ENODATA for
1695 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
1696 sqlite2 and sqlite3.
1698 kes More pruning cleanup.
1699 kes Turn on wait_for_drive by default in mtx-changer.
1700 kes Turn on Batch insert code by default as it now passes regression.
1701 kes Add ./configure --enable-bat to enable building of Bat.
1702 No install yet though.
1704 kes Implement a new .sql command for bat.
1705 kes Implement code to turn off pruning in obtaining the next volume.
1706 Pruning is turned off for the status dir command, but turned on
1707 for SD requests and for the list nextvolume command.
1709 kes Correct Qmsg() that was not updated correctly when committing a
1710 previous change (probably the recent TLS patch).
1712 kes Write new subroutine is_volume_purged() that explicitly checks
1713 if the Volume is purged, and if so marks it as such. This should
1714 resolve problems reported about needing to mount twice to recycle
1716 kes Rewrite pruning algorithm to do more work in the SQL engine, and
1717 to pass a list of JobIds to be deleted to SQL. Also, minimize the
1718 amount of duplicated code.
1719 kes Do volume pruning only for the Media Type desired (reduces pruning time
1720 if multiple Media Types are in the same pool).
1721 kes Implement more detailed info in the Job report for the Bacula version
1723 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
1725 ebl Add bbatch tool to bench database and insert mode.
1726 Fix sql quote stuff in batch mode
1727 Fix sql stuff for mysql
1729 kes Correct problems with am/pm scheduling. Fixes bug #808.
1730 kes Implement new prunning code that prunes up to 1000 jobs at
1731 the same time. The same technique can be applied to a number
1732 of other prune/purge subroutines.
1733 kes Add an insanity check when starting a new tape job to ensure
1734 that the tape position has not been changed. If so fail the
1736 kes Fix Win32 build for dlls to add the folllowing:
1737 src/lib/bsock.c -- new file with new entry points
1738 src/lib/dlist.c -- new entry points
1739 src/cats/sql_create.c -- new entry point
1740 src/cats/sql_cmds.c -- new DATA item exported
1742 ebl batch mode cleanup bscan-test is ok now.
1743 kes Implement SD code to check length of disk volume before appending.
1745 kes Correct return status on db_batch... routines.
1746 kes Add call to db_write_batch_file_records() to migration code.
1747 ebl Fix AfterJob timing
1748 kes Move the checking of the database in initializion of the Director
1749 to after we drop privileges. This avoids the need for both root
1750 and bacula access to the DB.
1751 kes Correct a misplaced variable definition in src/filed/backup.c
1752 kes Correct how the new batch insert db_create_attributes_record()
1753 uses the arguments. Caused a seg fault in bscan.
1754 kes Implement lock() and unlock() methods in DEVICE class.
1755 Implement block() and set_block(xx) methods in DEVICE class.
1756 kes Modify bnet_connect() so that it uses time() to check for the
1757 wait time expiring (on some OSes, some system calls may not
1758 return immediately).
1759 kes Modify Verify to obtain the previous JobId when it is actually
1760 running rather than at schedule time (as it was in 1.38.x).
1761 kes Fix src/job.c to handle MaxWaitTime correctly. This should
1763 kes When checking pid in pid file, continue running if the pid is
1764 the same as ours. This occurs on IRIX after a system crash.
1767 kes Extend new GUI API.
1768 kes Make the ua structure a class, and implement send_msg(),
1769 error_msg(), warning_msg(), and info_msg().
1771 kes Apply fix from for building wx-console on the Mac from
1773 kes Implement new select mechanism for GUI programs.
1774 kes Reorganize initialization of stackedWidgets in bat.
1776 kes Add updated nagios plugin supplied by Christian Masopust.
1778 kes More bat implementation.
1779 kes File migrate bug with Pool Occupancy using mediaid instead
1780 of jobids. Fixes bug #795.
1781 kes Fix orphaned buffers in filed backup and verify due to
1782 crypto buffers not freed during errors. Fixes bug #789.
1783 kes Extend new GUI api code to tree commands.
1784 kes Ensure that tree and dot commands check console ACLs.
1785 kes Permit marking directory with trailing slash.
1786 kes Allow 20 console connections (instead of only 10).
1788 kes Add smartctl call to bacula-sd.conf as an example of getting
1791 kes Modify jobq.c to let simultaneous restore jobs run. This may
1792 cause them to fail if they cannot get a drive.
1793 kes Add Client Connect Wait to Storage daemon to permit users to
1794 modify the time the SD waits for a FD connection.
1796 kes Correct virtual changer check which was backwards. This caused
1797 volumes to be unloaded into slots already occupied.
1799 kes Apply Command ACL filter to JobId list in restore command.
1800 kes Correct typeo in var.c patch.
1802 kes Don't let Bacula prune File or Job records for the current Job.
1803 kes Fix variable substitution pad + inc bug reported (with patch)
1806 kes Correct SQLite log table index as reported by Luca Berra.
1808 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
1810 kes Begin implementing new comm signals for API.
1811 kes Fix a few places in lib/message.c where the open fd may
1813 kes Continue implementing lib/bsock.c (real class). Make jcr,
1814 who, host, and port private. There are new methods to access
1815 them for non-class use. This required touching a number of files.
1817 kes Add LANG=C to autoconf/randpass so it works with languages other
1818 than English. Fixes bug #788.
1820 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
1822 You will not be able to generate Include/Exclude list any more.
1823 It will be fixed soon.
1824 If you want to use this, you can apply
1825 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
1827 kes Restore of sockets created false error messages because Bacula
1828 no longer restores sockets, but the code was still trying to
1829 set the attributes on a non-existent file. Reported by a user.
1830 ebl finish RecyclePool feature
1831 Media will takes Pool.RecyclePool
1832 when moving from Scratch to a Pool or when user will do
1833 update volume=xxx frompool
1834 To use it, add RecyclePool = aPool to your Pool resource
1837 RecyclePool = Scratch
1841 kes Expand new BSOCK class adding signal() and new BNET signals.
1842 kes Begin enhancing the dot commands adding a new API function
1843 that returns more information and will make it easier
1844 to interface to the Director from a program.
1846 kes Make DEVICE fd private. Its new name is m_fd, and can be
1847 obtained with dev->fd() outside the class. This is the
1848 first of many DEVICE members to be made private.
1849 kes Implement Michael Renner's idea on having a virtual disk
1850 changer. I made some minor modifications (e.g. I did not
1851 implement the Virtual Changer directive, but simply set
1852 the Changer Command to an empty string.
1854 kes Implement a BSOCK send() method that writes the whole record
1855 in a single write() request rather than in two.
1856 ebl add update volume=xxx recyclepool=yyyy
1857 volume takes recyclepool from pool when using update volume=xxx from pool
1859 kes Fix encryption deblocking bug, which caused some restored files
1860 to be truncated. This fixes bug #763.
1861 kes Add FD event sequence order prepared by Eric -- for RunScripts.
1862 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
1864 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
1865 ebl Use btime_t instead of uint64_t in media patch.
1867 kes Optimize the use of the database a bit in the Status dir command.
1868 Only open it when needed, ensure that if any previous database
1869 was opened, it is closed.
1871 kes Correct VolCatBytes bug from media patch.
1872 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
1873 in the case of orphaned records.
1874 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
1875 and File records in 300K chunks to be more efficient. This
1876 idea came from Juan Luis Frances (if I remember right).
1877 kes Apply Eric's scratch patch that moves a purged Volume to
1878 the RecyclePool. Question: how is RecyclePool set? what
1879 happens to the ScratchPool?
1880 kes Apply Eric's media patch that collects read/write media
1881 times as well as byte counts. This patch requires a
1882 simultaneous upgrade of the DIR and SD. Note, there
1883 should be some way to turn off timing. I'm not sure
1884 times are in Bacula units.
1885 kes Apply Eric's batch-insert patch.
1887 kes Update projects list.
1889 kes Implement Include/Exclude file lists in FD as dlists using
1890 the new dlistString class. This permits efficiently having
1891 large include/exclude lists and completes project Item 25.
1892 kes Fix dird/ua_cmds.c so that a cancel command checks if the
1893 console is authorized to cancel the job. This fixes bug
1895 kes Modify SD so that the VolCatJobs medium record is updated
1896 at the beginning of a Job rather than the end. This
1897 fixes bug #775 where exceeding MaxVolJobs caused jobs
1899 kes Added a mutex around getting and setting Volume information
1900 so that multiple simultaneous jobs will single thread.
1902 Switch to using Subversion
1903 kes Remove src/pygtk-console/ from configure
1905 kes Delete src/lib/btree.c from win32 build, then add rblist.c
1906 plus the entrypoints.
1907 kes Apply patch supplied that corrects debug print
1908 in canceling jobs for max run time. Supplied as
1909 part of bug #621, which was previously fixed.
1911 kes Test on job_canceled() and sd_msg_thread_done inside
1912 loop starting the message thread to avoid a race condition.
1914 kes Remove rl_catch_signal from console.c as it conflicted
1915 with the header definition. Fixes bug #765.
1916 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
1918 kes Clarify some stored/acquire messages to indicate if the
1919 problem is with read or append.
1921 kes Fix memory leak with storage ids in cats/sql_get.c
1922 kes Terminate watchdog earlier to avoid reference to released
1923 memory -- reported by Jason Austin.
1924 kes Move closing the database from jobq.c to the director daemon
1925 termination routine. This fixes memory leaks for shadow jobs
1926 (i.e. migration jobs).
1927 kes Free up the unique jobid chain items in migrate.c. This fixes
1928 a memory leak problem.
1929 kes Convert some ugly looking for statements to use foreach_alist
1930 in findlib/find.c. This will facilitate converting the structures
1931 to use dlist (for large include/exclude lists).
1932 kes Fix a bug in the btree.c and btree.h routines, then rename them
1933 rblist and add them to be built in src/lib. Include some new
1934 methods written by Rudolf Cejka that make the code more readable
1935 (hides some of the ugly casting).
1936 kes Add set_next() and set_prev() methods which make the code much more
1937 readable. Also add a new dlistString class that facilitates storing
1938 strings in dlists. To be used in the large include/exclude lists.
1939 kes Make some trivial modifications to lib/tree.h that use rblist
1940 rather than dlist for storing the tree links. This was suggested
1941 by Rudolf Cejka. The result of this is that the restore tree now
1942 uses red-black binary trees rather than simple linked lists. This
1943 should give rather dramatic speed improvements for directories
1944 contining large numbers of directories/files (more than 10000).
1946 kes Fix maxruntime bug #621.
1948 ebl Implement the include JobID in spool file name project.
1949 kes Reorder projects file in order determined by Jan 2007 vote.
1950 kes Implement item #12 on project list -- quick release of FD by
1952 kes Fix open of SQLite3 db where user does not have write permission
1953 so that DIR does not crash. Fixes bug #761.
1955 kes Add back missing @ in Win32 Makefile.
1956 kes Change 'Device not configured to autolabel' from INFO
1958 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
1959 which should restart an indefinite # of times.
1960 kes Fix configure --help to print --with-mysql[=DIR]. Same for
1961 other DIR specifications.
1963 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
1964 Fix path quoting in SQLite scripts.
1965 Fix problems with SHGetFolderPath.
1967 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
1969 kes Fix Job restart on error bug that promotes an Inc to a Full
1970 backup. This should fix bug #755.
1971 kes Add qt-console and first cut of code.
1975 kes Fix Bacula->Documentation link on Win32 to point to index.html
1976 instead of bacula.html. Fixed bug #750.
1977 kes Return JobId in db_get_job_record() when JobId==0. This should
1979 kes Do not release source pointers when restarting a failed job.
1981 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
1982 This *should* fix bug #747.
1983 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
1986 kes Modify USTORE constructor to set an empty store_source string,
1987 and don't copy the store_source string in a cancel. Hopefully
1988 this will fix Arno's seg fault, bug #744.
1989 kes Add back code to disable conio in configure. Fixes bug #743.
1990 kes Correct the Options scanner in the FD to correctly handle
1991 SHA1 option, which was eating the next option. Reported by
1993 kes Add code to indicate when the SD is spooling, spool wait, and
1994 despooling as requested by Alan Brown.
1996 Version 2.0.0 released: 4 January 2007
projects / bacula / bacula / blob