1 Technical notes on version 2.5
9 Multiple command/console per runscript
10 console command in runscript
13 State file updated on job term
16 Duplicate Job directives
17 - Allow Duplicate Jobs
18 - Allow Higher Duplicates
19 - Cancel Queued Duplicates
20 - Cancel Running Duplicates
21 Ensure they work with RerunFailedLevels
25 Improved status commands for Bat
26 Spooling/despooling status
27 Implement ftruncate for NFS devices
28 Add long term statistics job table
31 separator in console (!$%&'()*+,-/:;<>?[]^`{|}~)
36 kes Implement Win32 bat changes made to Branch-2.4
38 kes Tweak separator command in console to start disabled and
39 allow defining no separator character. Also make code a
40 bit more fault tolerant.
41 kes Make btraceback write the traceback to the working directory
42 before attempting to mail it.
43 kes Add a RFC to Projects.
45 kes Attempt to implement a kludge to make Qt work with bat
47 kes Setup rstorage correctly. Virtual backups are working.
49 kes Move setting JobLevel and JobType into a method, which should
50 allow completing Virtual Backups.
51 kes Fix verify jobs to work again.
53 kes Virtual Backup tweaks -- it is close to working.
55 kes Ensure that SD tried to mount a volume not in an autochanger
56 at least once before asking for operator intervention.
57 kes Make SD aware of Virtual Backup jobs.
58 kes Add VirtualFull for bat.
59 kes Changes to get read storage correct for Virtual Backup.
61 kes Remove old code from label.c
62 kes Split display_display_info() out of write_bsr_file()
63 kes do_vbackup_init() working -- i.e. bootstrap file built.
64 kes Change Bacula trademark owner from John Walker to Kern Sibbald
65 kes First non-working cut of vbackup
66 kes Correct FD heartbeat code to use volatile variable accessed by
68 kes Zero thread id with memset if on Win32 in case it is a struct.
69 kes If cannot create JobMedia record, continue to try to write eof
70 and clean up in block.c
72 kes Add code to interface OpenSSL to new Win32 pthreads code which
73 used a structure for thread_t.
75 ebl tweak bat for win32 compilation
77 ebl Remove tokyo cabinet from the source
78 ebl Update configure/autoconf to support berkeley DB
79 ebl Add a sort to db_get_file_list() to improve bsr construction time.
81 kes Add a mtx-changer.conf file that is not overwritten during
82 an upgrade. It fully configures the mtx-changer script.
83 kes Clear in-use bit on vol when unused while swapping.
85 kes Remove sleep at end of ./bacula
86 kes Clear hash packet for hardlinked files correctly. This corrects
87 a long standing bug where hardlinked files selected individually
88 would occasionally not be restored.
90 kes Apply Eric's patch to ensure that autoprune does not return
91 a Volume not in the autochanger unless requested to do so.
92 kes Correct bat restore display of multiple drives. This fixes
94 kes Do find_a_volume() each time an unload is done. This
95 fixes the failure of maxvol2-test.
97 kes Add some SD debug code.
98 kes Do find_a_volume() each time an unload is done.
99 kes Apply Joao's DBI patch that adds easier configuration of DBI drivers,
100 and adds --with-db-port to ./configure.
101 kes Use Qmsg() in job.c watchdog callback.
103 kes Release main control rwlock if ABORTing.
104 kes Make watchdog connect timeout queue messages rather than sending
105 directly to avoid lock conflicts with the real thread.
106 kes Add const char in dbd.c to avoid compiler warnings.
107 kes Fix python compiler string warning. Note, IMO the GNU C++
108 compiler guys have made a *very* bad change to their compiler.
109 They now force all strings to be 'const' unless you explicitly
110 cast them, which is extremely ugly and ruins nice code as well
111 as creates a lot of useless work.
113 kes Fix mtx-changer to detect both versions of Ubuntu (Debian)
114 mt. This fixes bug #1116.
115 kes Add const in python files to reduce compiler warnings.
116 This may have to be backed out because of later compiler
118 kes Fix failure of 2drive-concurrent-test. Always read label;
119 clear_unload() only after drive is defined in acquire_for_read().
121 kes Generally clean up the manual tape loading code. The main
122 conceptual change is that when a volume is marked to be unloaded,
123 its volume name is retained, and it is only marked as unloaded
124 when either the autoloader says it is unloaded or another tape
125 is read on that drive.
127 kes Add debug code and refactor subroutine in stored/mount.c
128 kes Fix format problem in bscan output reported in bug #1105.
129 ebl Fix get_next_volume_for_append logic with autochanger
130 - use pruned volumes if found
131 - don't reset the inchanger flag after getting a recycled volume
133 Fix recycle_oldest_purged_volume to take InChanger flag in account
135 ebl Add mmap/unmmap implementation for tokyodbm under win32
137 kes Make first step toward eliminating globals from config
138 scanning. Also should be a workaround for FORTIFY_SOURCE
139 GNU C bug -- fixes bug #1042.
141 kes Apply duplicate job tests to restarted jobs.
142 kes Copy more data when restarting a job so that run
143 overrides are kept. This should fix bug #1094.
145 kes More word alignment cleanup.
146 kes Fix bug where SD did not ask operator if the device could not
147 be opened. Reported by Eric.
149 kes Add dbuser to DIR conf file (replaces user).
150 kes Add --with-db-password to ./configure
151 kes Fix regress to handle db_password.
152 ebl Add new "status storage slots" that list autochanger
154 ebl Update vtape driver to compile only under Linux.
155 ebl Fix a bug when restoring with a wrong mediatype.
157 kes Eliminate ints from conf files and structures to avoid
158 word alignment problems
160 kes Fix bug reported by Scott Barninger where the bacula script
161 refers to scripts in the wrong directory. Needed to meet the
162 requirements of recent FHS location changes.
163 ebl Disable vtape for FreeBSD.
165 ebl Modify disk-changer to check if slot contains something before
168 ebl Fix vtape on win32 and debian.
169 ebl Fix autoselect patch (cause segfault).
171 ebl Fix autoselect option broken for a while. Fix #1089. Need some
172 work with StorageId to be able to use a particular drive in a
175 ebl Rename vtape to vtape.
176 ebl Update vtape driver.
178 ebl Modify vtape driver to avoid sparse file.
179 kes Add make clean of qt-source directory during ./configure
180 kes Store last block number written to tape in DEVICE and
181 use it for testing for correct last block on EOT.
183 Release Version 2.4.0:
187 kes Make sure to clear JS_WaitMedia when operator mounts a Volume.
188 This fixes bug #1095.
190 kes Add create_postgresql_database.sql to Win32 installer. Should
191 fix problem reported by Juilio Monteiro.
192 kes Get correct slot when auto unloading a device. This fixes bug
195 kes Fix multiple media restore.
196 kes Make DEVICE Slot private and access it via a method.
197 Allows better control over when it is set and cleared.
198 kes Fix possible seg fault if SQL error.
200 kes Add Martin's fixes to argument scanning for the estimate
201 command. This fixes bug #1093.
202 kes Add debug code to SD.
203 kes Fix renaming a Volume, which used the wrong Volume name.
205 kes If operator has rewind tape, print warning, release tape and
206 try once more. If tape is positioned somewhere, something went
207 wrong, so mark the tape in error and try once more. Previously
208 this error was fatal, now it produces an error message.
209 kes Ensure correct volume name displayed during restore
210 kes Ensure that Volume is mounted for restore.
212 kes Fix a few more Coverity reported problems.
214 kes Apply Allan Black's status dir job count patch.
215 ebl Add information about IMPORT/EXPORT slots in mtx-script.
216 kes Enhance a couple of SD debug messages.
217 kes Tweak unload flag setting and ensure it is set during swap.
219 ebl Fix #1091 about bad output in estimate command.
221 kes Modify autochanger locking to attempt to avoid race
223 kes Make sure device not busy before doing label command.
224 kes Display open() errors except when polling. Previously too
225 many were suppressed. This should fix bug #1070.
226 kes Fix Win32 reparse points. Bacula will not recurse into any
227 reparse point directory, including mount points, unless the
228 directory is explicitly mentioned at the top level (same as
229 with Unix). A file that is linked to another file will be
230 backed up -- much as Unix does for hardlinked files.
231 This fixes bug #1041.
233 kes Remove double quotes from ChangeLog and ReleaseNotes
234 kes Remove StorageId test when pruning and recycling (Eric's changes).
235 kes Remove old form of locking when getting volumes -- causes deadlock.
236 kes Change bat dirstat layoutWidget to dirstatlayoutWidget to make
237 the name unique and to eliminate compile time error.
238 kes Add accurate.o to Win32 FD Makefile
240 kes Fix cats dll build on Win32 after db_update_job_end_record
241 calling sequence change.
242 ebl Switch to tokyo dbm instead of htable in accurate code
243 ebl Include tokyo dbm to bacula source tree
245 kes Fix buffer overruns detected by Coverity.
247 kes Tweak joblog display.
249 kes Implement --without-qwt
250 kes Fix layout of restore tree dialog
251 kes Add configure bat QWT libraries, so that bat can be built
252 with or without the QWT libaries.
254 ebl Add dummy tape driver for regression tests.
255 kes Make sure we unload the right slot when swapping.
257 kes Add debug times, reduce size of two-pool-changer test
259 ebl Tweak autoconf scripts for vtape
261 kes Improve SD reserve debug code.
262 kes Testing an improvement to free up volumes no longer in use.
264 kes Rework SD acquire for read to handle autochanger Volume
266 kes Implement regression that explicitly tests swapping a Volume
267 from one drive to another.
268 kes Enhance disk-changer to detect most error conditions.
269 kes Fix SD code so that it properly swaps a Volume between drives.
270 This fixes bug #1083.
272 kes Apply libdbi patch from Joao Freitas for regress and for
273 Bacula trunk. Regress now works with libdbi. Nice.
274 kes Apply .nobackup patch from bug #1077 submitted by
276 kes Apply Bastian Friedrich's patch that adds %p to edit the pool
277 name into jobs cloned via the run directive.
279 kes Prevent a Volume that is being swapped from being freed from
280 the volume list. This will most likely fix, at least partially,
282 kes Fix strippath so that it does not get a buffer overrun and crash FD.
283 This fixes bug #1078.
284 kes Remove 50 millisec wait in SD that broke debugger.
285 ebl Add MaxRunSchedTime option that specifies the maximum allowed time
286 that a job may run, counted from when the job was scheduled.
287 ebl Fix MaxWaitTime option that specifies the maximum allowed time that
288 a job may block waiting for a resource, counted from when the job starts
289 ebl Rename (add) Max(Incr|Diff|Full)WaitTime to Max(Incr|Diff|Full)RunTime
290 kes Apply patch from bug #1076 by Tullio Andreatta <t.andreatta@troppoavanti.it>
291 that implements multiple commands per line in the console when using
292 readline. Modify the default to use a semicolon as the command separator.
294 ebl Fix SQL query in migration code.
295 ebl Make accurate mode with hash disk pass regression tests
297 ebl Implement first cut of accurate backup with hash disk.
299 kes Force unload of volume when wrong volume mounted in SD.
301 kes Fix bat seg fault at termination.
302 kes Add Bacula generated version to bat about box.
305 kes Experiment with allowing multiple read jobs.
306 kes Move final volume swapping code to DCR method and
307 call it from acquire_for_read().
308 kes When wrong volume is mounted during read, unload_autochanger.
310 kes Integrate the libdbi changes from Joao Henrique Freitas
312 kes Stop searching for Volumes in SD askdir if DIR returns the
313 same volume name twice in a row.
314 kes Close bat console windows first to eliminate error message
317 kes Tweak the swap Volume from one drive to another code so that
318 it now seems to work.
319 kes Resolve several problems with recycling that broke the new
320 code (these problems are in 2.2.9 as well).
321 kes Remove the volume lock when calling the sysop code.
322 kes Don't mark a reserved volume with no writers as unused otherwise
325 kes Rework class structures for VOLRES, DCR, and DEVICE to make
326 the method names a bit more logical, and for more logically
327 handling the responsibilities.
329 kes Remove redundant code in terminating the scheduler that just
330 causes a seg fault in many cases.
331 kes Cleanup releasing a volume and make it a DCR method.
332 kes Improve algorithm for detecting pre-reserved volume and
335 kes Tweak volume swapping code so it works.
336 kes Correct name overloading in mount.c
337 kes Replace released flag in VOLRES with reserved and add access
338 methods for the VOLRES class.
339 kes Prevent volume from being released while being swapped.
340 kes Apply Bastian Friedrich's edit codes patch for the bpipe-fd
342 kes Apply Bastial Friedrich's edit pool=%p patch for run clone
344 kes Refactor parts of stored/mount.c
346 ebl Add sanity checks for VolWriteTime and VolReadTime
347 ebl Take care of bad clock changes while computing VolWriteTime
348 and VolReadTime. This should fix or limit #1066
349 kes Correct error string numbers in dird/catreq.c
350 kes Restructure reserving, acquiring, and mounting volumes. Calls to
351 autochanger are deferred for mount.c -- simplifes the code.
353 kes Do not prune any running job. It just fails the job.
354 kes Lock the volumes when changing dev->reserved_device and marking
355 the volume unused otherwise the device can get reserved by
356 another job before the volume is released, thus blocking it.
358 kes Correctly detect Ubuntu systems, and add ubuntu platform directory.
359 kes Fix bug #1063, reuse of freed ptr in list nextvol.
360 kes Release regex compile buffer in filed/job.c
361 kes Add proper type of const char in sql_create.c
362 kes Turn off debug in daemon termination routines
363 kes Move free_volume_list() before devices are freed in stored.c
364 kes Fix reference to uninitalized stack variables in bregex.c.
365 This should correct bug #1067.
367 kes Fix possible seg fault in SD when freeing a volume entry.
369 kes Implement unload_dev() before swap device.
370 ebl Add statistics prunning with option and menu
371 kes Separate unload_dev() from unload_other_device() in autochanger.c
373 kes Apply patch from bug #1069 that corrects spurious error messages
374 when ACLs enabled on SGI but no ACL exists.
375 ebl Fix small segfault in bacula-sd when debug level is 500
376 kes Modify run_program() and run_program_full_output() to use
377 call by reference for the results string. This corrects a long
378 standing problem where the address of the string may be changed
379 in the subroutine but not in the calling program.
381 kes Re-enable code to remember last volume mounted on a non-tape
383 kes Add patch supplied in bug #1068 that fixes a SD crash when using
384 a Virtual autochanger.
385 kes Generate correct JobMedia records during spooling/despooling when
386 running concurrent jobs. Thanks to Tom Ivar Helbekkmo
387 <tih@hamartun.priv.no> for excellent analysis and testing.
389 kes Tweak hash algorithm for htable using Martin Simmons idea
390 for doing a circular shift.
391 kes Remember what volume is in VTLs (previously turned off for
393 kes Analysis of JobMedia records by Tom Ivar Helbekkmo <tih@hamartun.priv.no>
394 pointed out some problems in creating JobMedia records during
395 spooling with concurrent jobs. Fix the problem by updating the
396 start file position before despooling and generate a jobmedia
397 record at the end of despooling.
399 kes Fix handling of JobMedia records during spooling and when a
400 Volume is changed without actually writing data to the Volume.
402 kes Rework certain SD locking based on gdb tracebacks of deadlocks
403 sent by Eric. This code now uses only the volume_lock() rather
404 than the reservations lock when at EOM and acquiring a new
406 kes Ensure only one exit point in several subroutines.
408 kes Implement bsock code to permit locking. Use the new code in Verify
409 in the FD to prevent the heartbeat thread from disrupting the Verify
410 data sent to the Dir.
411 kes Modify SD locking to eliminate locking the reservations system from
412 outside the system. Use the volume lock when getting media data
413 and reserving a new volume at end of media.
414 kes Add Eric's volume_unused() fix to stored.c so that Volumes found
415 when SD starts are not locked into place.
417 kes Fix error compiling runscript code on 64 bit machines.
418 kes Tweak Win32 mount point code.
419 kes Fix a couple of bugs in the accurate code (bad sscanf, buffer not
420 cleared giving bad file estimate).
421 kes Implement BIG_MALLOC in htable code. Runs 2.5 times faster for
424 kes Keep Schedule run lists in order as suggested by
427 kes Implement autostart scripts for Debian.
428 ebl Implement upgrade catalog scripts.
430 ebl Apply jobstat patch for long term statistics. Have to implement
431 purge stats command and upgrade scripts.
432 kes Fix mtx-changer.in for broken Debian mt program.
434 kes Fix large number of JobMedia records reported by Eric Bollengier.
436 kes Apply doc fix from bug #1062.
437 kes Resolve crash and improper restore wx-console Win32 restore
438 GUI. Fixes bug #1065.
439 kes Update Win32 wxWidgets to latest version.
440 kes Attempt to do correct handling of Win32 mount points. Should
442 kes Fix Win32 FD backup/restore memory leak due to improper termination
443 of BackupRead/Write. This fixes bug# 1038.
445 ebl Reduce memory usage for accurate backup, working only with ctime
446 and mtime. (not all Lstat field)
447 About 40MB for my Linux system (400.000 files)
449 kes Add dcr->reserved_volume flag that allows us to release a volume
450 even if it is not vol->released. This allows maxvol2 to work when
451 Volumes expire and we are already writing to the device (i.e. a
452 volume is pulled out from under us by another job terminating after
453 we reserve the drive).
455 ebl Permit multiple command/console per runscript definition.
456 RunScript { command = /bin/true ; command = /bin/false ... }
457 ebl Add RunsWhen = AfterVSS to runscript. You can execute a command
458 (restart an application) just after the VSS snapshot on windows.
459 kes Don't zap dcr values during release_volume() as they might
460 have the next Volume to be mounted.
461 kes Fix AIX prototype.
463 kes Second cut of drive switching during backup.
466 kes Update Win32 version of wxWidgets to most recent version.
467 kes Tweak Copy job details.
468 kes Rework dir_find_next_appendable_volume to make a bit more effort
469 to find a suitable volume before giving up.
471 kes Make ask_sysop_to_create... to return if waken from wait.
472 This helps get out of blocked conditions.
473 kes Experimental implementation of switch_device in reservations.
474 kes Implement FD version to allow easier protocol changes.
475 kes Add Plugin Options string -- not yet passed to FD.
476 kes Implement PluginOptions ACL.
478 kes Attempt to correct problems with restores with autochangers and
479 use counts going negative
480 kes Rework SD status command and implement API for bat. Implements
481 header, runing waitreservation, devices, volumes, spooling,
482 and terminated status keywords.
483 .status storage=xxx <keyword>
484 kes Clarify TLS error message by adding double quotes around name.
485 kes Simplify SD/FD status code by putting api flag in STATUS_PKT
486 kes Pass jcr to tls routines so debug messages can be handled better.
487 kes Rework jobq resource allocation code, and possibly fix a bug
488 that caused reference counts to get out of sync.
490 kes Rename fd/dir plugin to use Bacula standard underscore.
491 kes Plugin work -- bring dir up to fd level.
492 kes Start implementation of VTL code
493 kes Fix Win32 build after adding new cats subroutine.
495 kes First cut at Duplicate Job implementation.
497 kes Fix bugs in MaxFullInterval and Implement MaxDiffInterval.
498 kes Start PluginOptions string, and refactor a bit of ua_run.c
499 ebl Apply Allan patch that permit to reset recyclepool.
501 kes Test patch -- possible fix or improvement for bug #1053
502 kes Refactor FD and SD status commands to permit new API code in
503 SD, and to fix Win32 build.
504 kes Win32 build is now working.
506 kes Implement 'MaxFullInterval' and start 'MaxDiffInterval' based on
507 some ideas in patch from Scott Bailey.
508 kes Begin implementation of duplicate Job control.
509 kes Fix some of Win32 build after recent additions.
510 kes Apply patch from Frank Kardel that implements 'honor no dump flag',
511 which causes the FD to detect whether or not the OS has the
512 honor no dump bit (*BSD systems), and if so, to skip backing up
513 any file with this bit set. The feature is enabled by setting
514 'honor no dump flag = yes' in the Options section of a FileSet.
516 kes Correct po warning message with datarootdir
517 kes Implement more code in dird.c to put configuration parsing in
518 a class rather than use globals.
519 kes Restructure SD status command for implementation of bat API
522 kes Suppress incorrect 'Will not descend from x into y' messages.
523 kes Eliminate FORTIFY_CODE=2 bug, and make first cut at removing
524 daemon globals used by parser.
525 kes Apply Joao's patch to separate DB_TYPE and DB_PROG in configure.
527 kes Fix free of plugin_list when none exists.
529 ebl Apply accurate project patch.
531 ebl Fix a segfault when using strip_path option. (Use of pm_strcpy
532 on non-mempool object)
533 kes First cut of converting FD .status to work with bat API.
535 .status client=XXX header
536 .status client=XXX running
537 .status client=XXX terminated
538 kes Implement first cut of Copy Job.
539 kes Implement Catalog in Pool resource. It overrides catalog specified
540 in the Client resource.
542 kes Apply patch (with some difficulties) from Joao Henrique Freitas
543 <joaohf@gmail.com>, which adds support for libdbi as a Bacula
545 kes Add patch from Martin Schmid scm@apsag.com that checks to see if
546 ftruncate() actually works. In the case of some (cheap) NAS devices,
547 it does not, and so recycling NAS Volumes does not work. The code
548 simply unlink()s the file, then recreates it. This fixes bug #1011.
550 kes First incomplete cut of big malloc blocks for htable.
551 kes Tweak plugin code.
553 kes Plugin debug code + tweak a couple bat dialog layouts
555 kes Fix creating first JobMedia record during Migration to include
556 proper index. This caused slow restores of migrated jobs.
557 kes Temp fix to plugin name file_index.
558 kes Bacula backed up and restored a MySQL database.
560 kes Implement plugin restore.
561 kes Implement parsing of db_driver to give db_type index.
563 kes First cut of plugin restore code.
564 kes Fix bug #1047, which had a heap overrun when stripping certain paths,
565 and do not strip paths on symbolic links.
566 kes Set catalog backup database and user name from values specified on
567 the ./configure line.
568 ebl Fix #1031 about wrong pool source information in job report.
571 kes Remove a redundant jcr argument to find_files, match_files, and
573 kes Implement '.status dir header|scheduled|running|terminated' that
574 prints the requested status section. With the exception of the
575 header, the other reports have fields separated by tabs (\t).
577 kes Apply patch from Peter Much <pmc@citylink.dinoex.sub.org> that fixes
578 a resource embedded run command to find a since time if no explicit
579 since time was supplied on the command line.
580 kes Apply state-file.patch sent by Allan Black <Allan.Black@btconnect.com>
581 that updates the state file at job termination time in addition to
582 when the daemon terminates.
584 kes First version where a plugin did a backup.
585 bpipe-fd.so created a backup file, wrote a test
586 string to it, and Bacua could restore this fabricated file.
588 kes Implement DB Driver = string for the DBI driver.
589 kes Remove all old bdb_xxx.c code. Add dummy routines to bdb.c
590 kes First cut of code for loading Win32 plugin dlls. Implement
591 dlopen, dlsym, dlclose, and dlerror in src/win32/compat/compat.cpp
592 and implement a dlfcn.h file based on opengroup's definitions of
595 kes First cut plugin directives.
597 kes Apply patch from bug #1049 to prevent stripping the path on a
599 kes Attempt to fix bug #1047 where stripping a path corrupts the
600 heap. Waiting for feedback.
601 kes Correct the Mount message not to suggest labeling a new tape
602 when doing a restore. Submitted by email by John Stoffel.
603 kes Attempt to work around gcc FORTIFY_SOURCE bug that crashes the
604 FD by using casting. Reported in bug #1042.
606 kes A bit of crypto cleanup. More later.
608 Release Version 2.2.8
610 kes Apply patch from Martin to correct bug #1040, bscan sets existing
612 kes Fixed important spelling error in doc -- bug #1045.
614 ebl Fix bextract to be able to extract non-portable Win32 data to
616 kes Move initialization of read/write res lock earlier in the code.
617 This fixes the crash with a null conf file. This fixes bug
619 kes Redefine CURES in lib/parse_conf to be URES and move it all
620 into lib/parse_conf.c -- this responds to bug #1042, but does
621 not fix it. The fix is not to compile with FORTIFY_SOURCE.
622 kes Backport to 2.2.8 fix de-referencing a NULL pointer in the scanner from
623 the trunk SVN. I don't think this was reported as a bug.
625 ebl Fix a bug during tape initialization with MTSETDRVBUFFER.
627 kes Fix Win32 build with new .def files and DLL_IMP_EXP ...
629 kes Add DataDespooling and DataCommitting status (committing is
630 the last despooling).
631 kes Finish implementation of new reservations code noted below.
633 kes Fix bsnprintf for float point numbers. I broke recently when
634 parameterizing some variables. This fixes bug #1036.
635 kes Undo recent reservations changes ... will apply them later
636 when they work better.
638 ebl Fixes #1034 which cause mysql to hang the connection after 8h
639 ebl Change default statistics target of filename.name and path.path
640 fields for PostgreSQL. This speeds lookup by indexes. Thanks
642 kes A few more tweaks to new reservation code. Make sure to clear
643 vol released flag when retaking volume. When reading label and
644 label is bad mark volume unused. When recycling, mark volume
645 unused so it can be renamed.
647 kes Fix reserve_volume() so it doesn't release a volume in use
648 (i.e. a volume entry not marked released). This should be
649 the last part needed to fix bug #1018.
651 kes Move Heartbeat documentation from Job to Director resource.
652 This fixes bug #1033.
654 kes Fix existing switch drive SD code to call autochanger to release
655 any old volume. This must be done to keep the autochanger from
656 releasing subsequently newly reserved volumes in doing a close().
657 This should fix bug #1018.
658 kes Fail if attempting to get console input in batch mode. This
659 should help fail RunScript console commands that are incomplete.
660 kes First cut implementing switch_drive() in SD (not actually called).
662 kes Implement first cut running console commands in a RunScript.
664 ebl Fixes bug #1028 where 'Selection Type' option was not usable
666 ebl Fixes bug #897 and bug #1005 where bacula doesn't display runscript
669 Release Version 2.2.7
671 kes Add new free_tls() entry point so that Win32 builds.
672 kes Fix compile warning in src/lib/util.c
673 kes Fix entry point for edit_job_codes() so that Win32 builds.
674 kes Fix seg fault Frank Sweetser reports in regression testing
675 on his systems. The problem was that the original author of
676 bsnprintf.c did not take into account the side effects of
677 using ++x in the argument to a #define.
678 kes Make SD protocol backward compatible with version 2.2.x.
680 ebl Fixes bug #1015 where bacula failed to restore acl to a socket
681 because Bacula no longer restores sockets.
682 ebl Always use ignorecase fileset option on win32 FD.
684 kes Apply patch from Michael Stapelberg <michael@stapelberg.de>
685 that implements double quoting include names in conf files,
686 and also allows piping input by having the first character
687 be a vertical bar (|).
688 kes Apply patch from Bastian Friedrich <bastian.friedrich@collax.com>
689 that implement %f in RunScripts to pass the FileSet name.
690 kes Skip leading | when lex input comes from a pipe as suggested
691 by Michael Stapelberg <michael@stapelberg.de>.
693 kes Apply patch for bsmtp Win32 daylight savings time fix supplied by
694 Nerijus Baliunas <nerijus@users.sourceforge.net>
696 kes Implement Plugin Directory and plugin events.
698 kes Implement a security enhancement: TLS authentication but no
699 encryption. Enabled by setting 'TLS Authentication = yes'.
700 Note when this is on, TLS encryption is turned OFF!
702 kes This patch corrects a problem where the maximum concurrent storage
703 jobs counter gets out of sync during restore jobs causing jobs to
704 'wait on max Storage jobs'. This patch fixes bug #1009.
706 kes This patch fixes bcopy so that it produces correct Volumes.
708 kes This patch eliminates spurious output to the console during a VerifyVolume
709 job that contains encrypted data. It fixes bug #1024.
711 kes This patch prevents the 'status dir' command from trying to use a scratch
712 volume and possibly moving it from one pool to another. This patch fixes
715 kes Add new include to postgresql.c suggested by Marc Cousins so
716 that it compiles correctly with pgre version 8.3.
718 kes Fix --archivedir addition to configure. Replace it with
719 --with-archivedir in configure.in This fixes the regression
721 kes This patch fixes bug #1012 where the job is canceled because
722 of Max Run Time exceeded when the job has not yet started.
724 ebl Apply Richard Mortimer patch that fixes #1016 when there are more than
725 one 'part' to write. Instead of each part being stored on disk,
726 written to DVD, then deleted from disk, all parts are written to disk,
727 and only the last is written and deleted from disk.
728 kes This patch fixes the status command to include the formating string for
729 JS_AttrInsterting. It fixes bug #1021.
730 kes This patch should fix the Mac OS X build problem on the latest
731 Darwin, where sys/types.h was not included correctly (apparently
732 due to a change in the Mac headers). The solution was to explicitly
733 ensure that it is defined for the ./configure.
734 This patch also has a rebuild of configure that includes the Debian
735 qt4 patch to check for qmake-qt4. This patch fixes bug #1020.
736 kes This patch should ensure that queued messages to the console are
737 displayed as soon as possible. It should fix bug 1007, but has been
738 reported not to work.
740 kes This patch fixes the infinite loop when trying to increase the
741 maximum number of volumes in a Pool during the add command.
742 This patch fixes bug #1008.
744 Release Version 2.2.6
746 db Remove extra data on estimate command in joblist for bat.
748 kes Cleanup of code in SD that sets the LastWritten date. This doesn't
749 really change anything, but is the beginning of doing it *right*.
750 To do it completely right the LastWritten date must be passed to
751 the SD, but it is not yet done.
752 kes Minor tweaks to some bat restore SQL.
753 kes This patch fixes bug #1003 where putting the message output from
754 a Verify job into the catalog results in a recursive loop. The problem
755 seems to show up only with postgresql (to be verified).
756 kes Correct %x to %p in postgresql debug statement.
758 kes Fix bug #942 where lots of emails where generated when the heartbeat
759 interval was low and Bacula wanted a different tape from the one in
762 ebl Add new SD despooling attributes and Dir inserting attributes
763 job status codes in the catalog (Status table).
765 ebl Use qmake-qt4 instead of qmake when available (debian system).
767 kes Add a security warning to src/cats/make_catalog_backup.in indicating
768 that passing the password via the command line (arg 3) is insecure.
769 This responds to bug #990 (it doesn't fix it).
771 kes Set default debug_level to zero. This corrects bugs #991 and #993.
772 kes Fix a crash in bat when it cannot connect to the Director for example
773 if the Director is not running.
774 kes Remove redundant INDEX (JobId) from File table in the trunk.
776 kes Make explicit exception to GPL in LICENSE to permit linking
777 the Win32 FD with Microsoft VSS code.
778 kes Apply the Solaris package patch from
779 Masopust, Christian <christian.masopust@siemens.com>
780 kes Apply the patch to optionally add a timestamp in the debug output
781 submitted by Mariusz Czulada <manieq@wp.eu>.
783 ebl Use PQerrorMessage instead of PQresultErrorMessage in postgresql
784 backend (sql_strerror). Fixes bug #989
786 kes Apply Michael Short's <mdshort@gmail.com> Win32 regress patch.
787 It applied with no problems.
788 kes Add PATH command to SunOS part of mtx-changer.in so that sed and
790 kes Redirect stderror to stdin on mt status command in mtx-changer.in
791 since the status is returned on stderr on Solaris.
792 kes Activate Close button on tray-monitor window. This fixes
794 kes Check for NULL item in parse_conf.c before calling it. In the
795 case of Device, there is no item and this caused a seg fault when
796 Device appears in the conf file.
797 kes Add a #define __CONFIG_H when including config.h in bacula.h. This
798 avoids pulling in config.h multiple times in some new code.
800 kes Fix spurious warning message printed when creating a volume with
801 a LabelFormat. This fixes bug #976.
803 Release Version 2.2.5
805 kes Add JobId in place of Job name in all the Jmsg() output.
806 kes Correct the APP_DESC for the Win32 storage service (remove an e).
808 kes Make maxvol-test and new more strict maxvol2-test work.
809 kes Print JobId in all Jmsg() job output.
811 kes Add new SD despooling attributes and Dir inserting attributes
812 job status codes. This fixes bug 961.
813 kes Fix Win32 drive display in bat version browser. Fixes bug #962.
815 kes Fix doc issue. This fixes bug #963.
816 kes Fix listing performance problems in bat. Pointed out by
818 kes Remove old debug code.
819 kes Fix bat code that tests for Win32. This should fix bug #968
820 kes Query 5 list wrong Vol after migration. This fixes bug #960
822 ebl Fix #969 where user can't change Replace option in restore menu.
824 kes Save jcr in thread specific data (tsd) for each thread.
825 kes Make Dmsg() print JobId as -%u.
826 kes Make Jmsg, Emsg, and others automatically pickup the jobid
827 for the thread if it exists.
828 kes Remove old reservation debug jid code.
829 kes Remove get_jcr_from_tid() from OpenSSL and tls code.
830 ebl Add an option that permit to specify spool size in job
831 definition. (Applying patches/testing/spoolsize_per_job.patch).
832 You must upgrade SD and DIR at the same time.
833 dvl Add new configuration item --archivedir
834 dvl Adjust regression tests to use tmp not /tmp. This will allow
835 multiple concurrent runs of the regression tests.
837 kes Fix race condition that drops final block written to volume.
838 This happens in rare cases with multiple simultaneous jobs
839 when the Volume fills. This fixes bug #964. May be related
840 to bug #935 and possibly #903.
841 kes Eliminate more strerror() and replace with bstrerror().
842 kes Remove BSD getopt and replace with unrestricted IBM version.
843 kes Fix Win32 build for changed calling sequences.
844 kes More tweaks to the mount volume routines to get everything
845 right. Changed variable name from find to have_vol, which is
846 much easier to understand.
847 kes Enhance btimer debug code.
849 kes Fix FD->SD authorization failure, which was due to spurious
850 wakeups from a pthread_cond_timedwait(). Simply check the
851 predicate before continuing. This fixes bug #953.
852 kes Add const char where needed (more to do). Remove temp debug code.
854 kes Setup SQLite busy handler before doing queries. Fixes bug #967.
855 kes Don't overwrite error message in check_tables_version.
857 kes Unlock batch insert tables with same calls used elsewhere.
858 kes Allow starting 59 jobs a second.
859 kes Make SD session key more random.
860 kes Add retry for SQLite opening db if it fails. Probably helps
862 kes Suppress extra error messages during batch insert failure.
864 kes Add jcr to timer packets so if killed message can be sent to job.
865 kes Add JobId to all Dmsg() output.
866 kes Put some FD auth code on dbglvl rather than fixed.
867 kes Return insert attributes error message in db msg buffer to avoid
868 false error messages. Helps fix bug #966.
869 kes Separate batch init error messages. Probably helps fix bug #966.
870 kes Make SD code that contructs attribute insert check string lengths
872 kes If Dir gets an error during inserting attributes, cancel SD.
873 This reduces unnecessary error messages.
875 kes Correct search boolean for getting Volume info
876 ebl Cleanup batch insert code. Probably fixes bug #965.
877 kes Back out one small change to the reservation system (reserving a volume).
878 kes Rework how a Volume is mounted. It is now much more intelligent and
879 will always attempt to use any mounted volume if possible and reduces
880 calls to the Director asking about volumes.
882 kes Turn off some code when batch insert not enabled.
883 kes Edit FD name in connect error messages.
884 kes Rework the reservation system to take into account that the Director
885 might give us a Volume that is different from the current one being
886 used, and to ensure that we don't exceed Maximum Volume Jobs.
887 This fixes (mostly) bug #947 ' Maximum Volume Jobs = 1 produces
888 fatal error with multiple jobs running'
889 kes Add more debug code in reservation system.
890 kes Implement maxvol-test to check bug #947.
892 kes Add code to handle tray monitor separated from Win32 FD.
893 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
895 kes Add missed return in fixing verify bug -- trunk only.
896 ebl Fix a command parser issue causing a director segfault.
897 kes Fix ANSI tape labeling. Fix restoring ANSI labeled Volumes.
899 kes Increase the max block size to 4MB fixes bug #957.
900 kes ERABT if user sets min block size > max block size. Fixes bug #956.
901 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
902 is not properly mounted (recognized) during a poll.
903 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
904 Job that has differences reports Verify OK.
905 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
907 ebl Add an option to operate on all pools with update vol parameters.
908 This complete the project 20. Patch from Nigel Stepp.
909 ebl Add history support to bconsole when using readline.
910 Using Ctrl-D to exit doesn't update .bconsole_history
911 kes Modify new volume algorithm to use max MediaId for generating next
912 volume number rather than the count of Volumes. This should essentially
913 eliminate the failure rate if some volumes were deleted. Bug #921.
914 kes Begin implemention of Optimize Job Scheduling.
915 kes Implement restore callback that Dirk and I agreed on for bat
916 restore. This fixes bug #928. Restore of backup of zero files fails.
917 kes Fix SQL Catalog logging which broke with new db_escape_string
920 Release Version 2.2.4
922 kes Fix bacula_cats.def for new db_escape_string().
923 kes Increase size of name string when FD making connection to SD.
924 May fix bug #953. FD->SD connection failure.
926 kes Add code to help Dan debug 2drive-incremental-2disk test.
927 kes Add code to try to fix bug #908.
928 kes Add waits to multiple exit detection code to try to force pid
929 file to always be deleted.
930 kes Restore good dev.tar.gz to rescue set appropriate binary property.
932 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
933 trying to switch drives by checking for blocking before unblocking.
935 kes Cancel storage daemon in all cases where FD reports error. This
936 should fix virtually all cases of bug #920.
937 kes Fix db_escape_string() for MySQL which did not compile.
939 kes Fix error message that was clobbered when Dir tells SD it does not
940 have write permission on Volume. This should fix a minor point
941 in bug #942, but not the main problem.
942 kes Add code to cancel job in SD if FD connection fails. This should
944 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
945 dvl Pass jcr and db into db_escape_string() to enable better escaping
947 kes Fix migration code to get correct Volume name with multiple volumes
948 by skipping |. Fixes bug #936.
949 kes Implement patch supplied by Landon to fix bug #944 where using
950 TLS with bconsole uses 99+% of the CPU.
951 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
953 kes Move patches into patches directory.
955 ebl Fix bug #946 about 'bacula-dir -t' which doesn't works
958 ebl Using 'm' in bconsole will show messages like before,
959 and not memory usage.
960 kes Fix bug #935, and probably also bug #903 where files were not
961 restored. MediaId was not properly set in JobMedia record after
964 kes Suppress chown and chmod error messages if the FD is not running
967 kes Apply Martin Simmons' patch that should turn off the new API usage
968 when batch insert is turned off allowing building on older
970 kes Add ./configure search in qwt-qt4 for qwt package
972 kes Bacula is now free of 3rd party GPL copyrighted code!
974 kes Add guid_to_name.c/h which replace idcache.
975 kes Remove enh_fnmatch.c. Make code that references it use fnmatch.c
977 ebl Detect if new PosgreSQL batch insert API is present.
978 kes Correct incorrect mempool call causing Director crash. Occurs on
979 systems without va_copy().
980 sb Update spec files for 2.2.1 release
982 kes Fix memory pool call in ua_output.c. bug #934.
983 kes Replace fnmatch.c and fnmatch.h by modified BSD versions.
984 Add test program to fnmatch.c
986 kes Integrate patch to README.vc8 from
987 Hederer Jean-Sébastien <hedererjs@asperience.fr, had to manually
988 edit it to get it into Unix patch format.
989 kes Implement mkpath.c to replace old FSF makepath.c
991 kes Implement savecwd.h and savecwd.c. Remove FSF versions.
993 Release Version 2.2.1
995 kes Update POTFILES.in
996 kes Cleanup a few underquoted AC_DEFUNs in configure
997 kes Apply patch from Martin Simmons that adds a test for va_copy to
1000 kes Fix bug #921 by increasing the number of tries to create a new volume
1002 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
1003 can be called multiple times. Implement a version for machines
1004 without va_copy() that gets a big buffer.
1006 kes Integrate more portable zone offset code into bsmtp.c
1007 Submitted by Attila Fülöp.
1009 kes Fix bad SD->FD return status reported by
1010 (James Harper) <james.harper@bendigoit.com.au>
1011 ebl Fix a bug in read_close_session which return random status
1012 thanks to James Harper
1014 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
1015 and directory names during restore of single file/directories.
1016 kes Add sanity checks to .sql command when string is empty. Hopefully
1017 that will resolve Dirks Director crash.
1019 kes Apply patch submitted by Martin Simmons that corrects a seg fault
1020 in the bsmtp chat subroutine when debug is >= 10.
1022 kes Fix Director crash when running bat SQL queries.
1023 kes Add David's notes on Item 8: Copy pools.
1025 kes Rework projects file to be current and ready for a vote.
1026 kes Enhance lex scanner error message.
1028 kes Tweak LICENSE file to mention BSD code.
1029 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
1030 if specified on the ./configure.
1031 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
1032 This class is intended to allow us to open a second bsock to the
1033 Director while in the restore subdialog.
1035 kes Fix configure to create bat Makefile before creating dependencies.
1036 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
1037 kes Add a tooltip to the tray monitor.
1038 dvl Set the Director's PID file before dropping privs. This fixes
1041 kes Update AUTHORs file
1042 kes Increase the default max concurrent jobs to 20 in FD and SD to
1043 correspond with the default .conf files.
1044 kes Rewrite the Win32 service routines. This eliminates the 3 copies
1045 some different, of the same file created by RN when porting the
1047 kes Rearrange some of the Win32 directories and the placement of the files
1049 kes Set DEVELOPER flag in version.h
1051 ========================================================================
1052 Release Version 2.2.0
1054 kes Apply a second doc patch from Marc.
1055 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
1056 improves the tips section that discusses how to setup multiple
1059 kes Update bat README file.
1060 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
1061 corrects a typo in the Recycle status check in db_find_next_volume().
1062 This will probably fix a number of annoying problems with multiple
1064 kes Modify most of dird/msgchan.c to use bsock class calls rather than
1065 bnet calls -- no functionality change.
1067 kes Modify the Verify output to specify if files are missing on
1068 the Volume(s) or disk. Fixes confusion in bug #916.
1069 kes When more than one Volume is read in a migration job, the last
1070 Volume bytes reported are from the last read volume rather than
1071 the last written volume. Fixed. This fixes bug #910.
1072 kes Fix display of Recycle flag after update volume=foo recycle=yes.
1073 It previously printed New Recyle flag is: no. This fixes bug
1076 kes Correct seg fault when switching tape drives during restore.
1077 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
1078 be used until after 2.2.0 release.
1080 kes Remove fnmatch() in SD that permitted wild card specifications.
1081 This fixes bug #914.
1083 kes Fix %g in filename returned by SQL for browse tree reported by
1085 kes Fix configure so that it puts config.out in the cwd rather than
1087 kes Attempt to fix the locking problem reported by Eric in bug #906.
1088 kes Make berrno class to leave errno unchanged after constructor call.
1089 kes Make bnet_server use the heap rather than the stack to allocate
1090 its socket fd pointers to avoid a crash at termination. Problem
1091 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
1093 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
1094 and putting it in depkgs-qt along with Qt4.3.
1096 kes Rework code in acquire.c that switches drives for reading when
1097 the Media Type does not match. This should fix bug #906
1099 ebl Fix a director segfault during job setup #907
1100 kes Correct seg fault in postgresql when first operation returns no
1101 rows. Fixes Dirks File browser problem seg fault with bat.
1103 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
1104 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
1107 kes Implement PopUp YES/NO dialog for bat.
1109 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
1111 kes Correct RunScript to terminate job in FD on failure.
1112 kes Change abort_on_error and AbortJobOnError to fail_on_error
1113 and FailJobOnError in RunScripts.
1114 kes Minor tweaks of code formating in RunScripts, principally to
1115 avoid depassing 80 columns.
1117 kes Eliminate one #ifdef Win32 in bsmtp
1118 kes Implement grow tool to grow a file for testing very large databases.
1119 kes Add big-vol-test to test Bacula seeking with > 5GB.
1122 kes Modify find_next_volume() to return all values in Media record.
1123 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
1127 kes Update Release notes
1129 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
1130 Warning, in previous beta version, all media get from scratch keep their
1133 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
1134 This should fix bug #842. Made a note to look at removing the temp
1135 files at the end of the install.
1136 kes Add ability to mount and unmount a file device providing it is
1137 marked as being removable and has the appropriate mount and unmount
1138 commands defined in the Device resource. This fixes bug #830.
1139 kes When applying a storage override, release all previous storage
1140 definitions rather than just prepending the new storage.
1141 This should prevent a good deal of confusion.
1143 kes Implement ./configure search for qwt libraries.
1145 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
1146 Win32 FD. This should fix bug #893.
1147 kes Remove an unnecessary beep in Win32 init code.
1148 kes Update copyright dates in Win32 executable about boxes.
1149 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
1150 code with a BSD getopt.c and getopt.h.
1151 kes Remove sched.h from the Win32 compat directory -- not used.
1152 kes Remove the Exit menu item from the Win32 tray monitor. If you really
1153 need to shut it down, do it through the services panel or the command
1155 kes Remove some inappropriate Bacula FSFE copyrights.
1156 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
1157 kes Fix regress config non-portable test as pointed out by
1158 Florian Heigl <florian.heigl@gmail.com>
1159 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
1160 as pointed out by Florian Heigl <florian.heigl@gmail.com>
1162 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
1163 Reported by Frank Sweetser.
1167 kes Fix client-only build.
1168 kes Integrate client-only fixes for bsys (initgroups) and conio from
1169 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
1170 kes Make arguments to get_scratch_volume() in same order as other
1172 kes Rework the prune_volumes() subroutine so that after purging and
1173 no volume found in desired pool, it will check for a scratch
1174 volume. This prevents recycling the whole scratch pool.
1175 kes Add code to status storage to print boffset_t (largefile support).
1177 kes Move qwt (Graphics libarary for Qt4) to depkgs.
1178 kes You now need a --with-qwt=<dir> to be able to build bat.
1179 kes Update src/win32/cats/bacula_cats.def to include the new
1180 db_get_query_dbids() call on Win32.
1182 kes Correct a problem when selecting a scratch volume and moving
1183 it to another pool that lost some columns.
1184 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
1185 kes Enhance Autochanger error messages to include Volume and device name.
1186 kes Rework prune_volumes() code to take account of InChanger flag,
1187 and to handle recycling volumes going to the Scratch pool and
1188 current pool because the RecyclePool directive.
1189 kes Implement a better and more efficient db_get_query_dbids() to
1190 handle creating and passing back a list of DBIds.
1194 kes Start work on new more efficient DBId subroutine. First use
1195 will be for recycling volume to Scratch inchanger.
1196 kes Increase number of JobIds in pruning from 1000 to 10000.
1197 This to be replaced by above routine.
1198 kes Begin implementation of building Qt4 on Win32.
1199 kes Correct typo in fix I added for bad TLS shutdown.
1200 kes Pull 2.0.3 patches into patches directory.
1201 kes Update Release notes. Include qt-console in line count.
1202 kes Update Projects file.
1204 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
1205 bug in migration code where a job that spanned two volumes
1208 kes Implement new BST_DESPOOLING blocked state. Change from locking
1209 during despooling in SD to blocking. This means that other threads
1210 can work with the device structure, in particular the reservations
1211 system while despooling.
1213 kes Fix return in reservation message queue that missed clearing
1214 the jcr lock (implemented 26Jun07 below).
1215 kes Rename a number of dev methods to make locking function names
1217 kes Document locking in lock.c. Move lock structures to new file
1220 kes Move reservations message lock to lock jcr only this
1222 kes Move main SD locking code into lock.c (new file).
1223 kes Update Win32 build to include lock.c
1227 kes Dirk committed the qwt library code for drawing graphs in bat.
1228 kes Tweak install of qwt so that it is integrated with ./configure.
1230 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
1231 out by Eric (my typo).
1232 ebl Fix configure.in to get batch mode enable
1233 kes Return correct string from authenticate.cpp in bat when connecting
1235 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
1236 spurious line drops when using TLS.
1237 kes Do not file reparse points when restoring a file that already
1240 kes Implement Windows reparse points -- similar to directories, but
1241 we do not descend into it. This is a first cut. They seem to
1242 be backed up, but restore is not yet tested.
1243 kes Remove restore_blocking in tls code when shutting a socket to leave
1244 it in blocking mode. Hopefully this will fix the encryption bug
1245 reported by Frank Sweetser.
1246 kes When opening a file for backup, tell the OS that we are going to
1247 read it sequentially -- optimization.
1248 kes Change variable names in authenticate_director() to not conflict
1249 with member names in bat. Caused great confusion with compiler,
1252 kes Queue openssl error messages in case of comm problem.
1253 kes Do shutdown() call if socket terminated.
1254 kes Remove some duplicated code in tls.c
1255 kes Move more of the bsock member variables into private and access
1257 kes Add Frank Sweetser's tls-test to the regression suite.
1259 kes Add Swedish sv.po file
1261 kes Don't print clock skew message in FD if less than 3 seconds diff.
1262 kes Add a bit of VSS info to status client.
1263 kes Implement a first cut of Vista VSS, using Win2003 code.
1265 Release: 2.1.20 beta
1267 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
1268 loaded tape but uses first drive).
1269 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
1270 This was indeed a Win32 issue.
1272 kes Simplify search of autochanger for in-use Volume.
1273 kes Fix exit condition of check for in-use volume. kes Remove
1274 inappropriate my_postgresql_free_result() in db_close()
1276 kes Fix bad return in FD when encryption signature not found.
1277 Probably caused a crash.
1278 kes Inhibit missing encryption signature error messages for
1279 file types where no signature computed.
1280 kes Correct inverted check on autochanger in reservation system.
1281 kes Tweak debug code in autochanger reservation.
1283 kes Add some additional locking in the cats directory in subroutines
1284 that modify packet variables called from batch insert.
1285 kes Rework how dcrs are allocated. new_dcr() can now be called
1286 with an existing pointer, and it will simply clean it up.
1287 This allows the reservation system to test various different
1288 devices, and will permit easy device changes.
1289 kes A bunch of changes all over to handle new new_dcr() calling
1291 kes Work more on the Volume management in the SD. Remember Volumes
1292 for tape drives and for autochangers (even virtual disk changers).
1293 kes When looking at the Volume list to reserve a drive, handle
1294 autochanger names correctly by interating through the changer
1295 devices. Also call the Director to see if a Volume is suitable
1296 for the current job.
1297 kes Fix some bugs in bscan. Make sure all media records are written.
1298 Make sure that valid JobMedia records are written for disk files.
1299 Previously they were completely wrong.
1300 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
1301 that the URLs don't change and so that the developers will all
1302 work off the same copy. Rebuild from scrach.
1303 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
1305 Release: 2.1.18 beta
1307 kes Fix seg fault in FD from incorrect digest size.
1308 kes Fix argument to non-OpenSSL crypto.c subroutine.
1310 Release: 2.1.16 beta
1312 kes Remove a few malloc()s from the encryption code.
1313 kes Use the class calls to bsock in filed/backup.c and restore.c in
1314 place of the old bnet_xxx code.
1315 kes Implement code that does an on the fly calculation of the
1316 signing digest during restore of encrypted files. It makes
1317 a best guess at the algorithm, and if it is not correct, will
1318 then revert to the old code which reads the file after it is
1320 kes Implement at least one missing crypto stream in stream_to_ascii()
1321 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
1322 #877 where a reload with bad syntax causes Dir to exit.
1324 Cut: 2.1.14 beta (not released)
1326 kes Do not free a volume on a tape drive until another volume is
1327 mounted and read, or the autochanger unloads the volume.
1328 This should help the SD re-use volumes that are already mounted,
1329 and should fix bug #886.
1330 kes Apply patch from user brettedgar that allows gnome2-console include
1331 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
1332 kes Apply patch from Lucien Weller that fixes day of week calculation
1333 because of DST flag problem. Fixes bug #887.
1335 kes Move find_next_appendable_volume() to after acquiring a valid device
1336 in reserve.c. This fixes bug #864 -- confirmed by reporter.
1338 kes Unable to reproduce bug 872. However added additional testing for
1340 kes Bug #874 resolved by documenting SQLite limitations.
1341 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
1342 kes Bug #881 resolved by removing typo in mtx-changer script.
1343 kes Made Frank Sweetser's wiki the official Bacula wiki with his
1344 approval. Added a link to the wiki on the web page, and implemented
1345 a backup from http://paramount.ind.wpi.edu
1347 kes Fix update allfrompool to pass pool name.
1349 kes Convert to pure GPL v2 license.
1350 kes Fix sscanf problems reported by Peter Buschman that caused
1351 a bus error on Solaris.
1352 kes Rework (simplify) the select prompt in bat.
1353 kes Move get_jobid_from_tid() into lib and create a
1355 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
1356 should definitely fix the problem of lost error messages in the
1358 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
1359 kes Eliminate tcpd.h from the project. Enclose the #include from the
1360 library with extern C ...
1361 kes Add print of signal name when a signal is trapped.
1363 Release: 2.1.12 beta
1365 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
1367 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
1368 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
1369 makes SQLit3 run 30 times faster, though a bit less safe.
1370 kes Implement --with-batch-insert in configure and detection of thread
1371 safe libraries. It is on by default, but turned off if no thread
1372 safe library (e.g. SQLite 2) is available.
1374 kes Fix Bacula PostgreSQL buffer overruns.
1375 kes Do better checking for NULL results returned from PostgreSQL;
1376 implement retry for failed queries; clear results buffer after
1377 failed query. Hopefully this will correct the PostgreSQL failures.
1379 kes Implement algorithm to handle only one appendable volume with
1380 Prefer Mounted Volumes = no.
1381 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
1382 returned from a query.
1383 kes Make volume lock recursive.
1384 kes Implement an additional volume reservation algorithm that
1385 starts by considering all reserved volumes then uses the
1386 old brute force algorithm of searching the resources to
1387 find a suitable device.
1388 kes Add new reservations debug code and refine the old code.
1389 kes Update the win32/dll/bacula.defs file.
1391 kes Tweak reservations algorithm to permit a few more cases, i.e.
1392 volume reserved, but on different drive, ...
1393 kes Enhance SD status to include Pool and Media Type for drive in a
1394 more readable format (a bit longer).
1395 kes Fix PostgreSQL double free.
1397 kes Minor refactoring of restore decryption code.
1398 kes Add code to smartall.c to detect double free of a buffer.
1400 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
1401 so that bsmtp will create a correct email address (mailbox only).
1402 kes Modify 'memory' command so that the buffers are listed as 'In use'
1403 to avoid confusion with Orphaned buffers.
1404 kes I reworked the OpenSSL include/lib flags to be handled in
1405 the standard Bacula way, which should fix bug #863 concerning
1406 non-standard OpenSSL libraries.
1408 kes Implement Help Browser window for bat.
1409 kes Fix reload bug that reset StorageId to zero.
1411 kes Fix TLS #ifdefing when TLS turned off.
1412 kes Ensure that when labelling a tape with Slot=0 that InChanger
1414 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
1416 kes Add StartTime to final uar_sel_jobid_temp query so that we can
1417 add DISTINCT (required by PostgreSQL).
1418 kes Implement BSOCK authenticate_director() method. Eventually will
1419 authenicate all daemons.
1420 kes Move several more functions into the BSOCK class.
1422 kes Add code to tell the OS that we no longer need a cached
1423 file that we were reading. In findlib/bfile.c. Also,
1424 only cache files that we are reading. Thanks to
1425 Tobias Oetiker <tobi@oetiker.ch> for the idea.
1426 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
1427 kes Implement script to automatically generate cats and dll .def
1428 files for Win32 dll.
1429 kes Update README.mingw32 to include new .def file generation.
1430 kes Correct typo in UTF-8 error message as reported by:
1431 jhernandez <julianhernandez@gmail.com>
1432 kes Add additional sm_check() code on debug level 1.
1433 kes Set default debug level to 1.
1434 kes Trap SIGABRT in attempt to get traceback.
1436 kes Reduce bat connect timeout from 30 to 15 seconds.
1437 kes More restructuring and implementing BSOCK class in place of
1439 kes Remove a few unnecessary malloc() tests in crypto code.
1440 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
1441 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
1442 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
1444 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
1446 kes Fix Verify InitCatalog. The attributes were not pointing to the
1447 correct saved location.
1448 kes Implement message callback so that GUI is sure to get all
1449 daemon messages. Currently displayed in a dialog in bat.
1450 kes Ignore SIGUSR2 (Bacula timer) in bat.
1451 kes Apply regress patch from bug #859 to allow regress to work
1452 with Solaris compiler.
1454 kes Begin adding TLS support to bat.
1455 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
1456 clean up lex.c and make it more readable.
1458 kes Move more bnet functions into the BSOCK class.
1459 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
1460 kes Complete change of berrno strerror() method to bstrerror()
1462 Release: 2.1.10 beta
1464 kes Cleanup incorrect email addresses in bsmtp.
1465 kes Make bat display initial messages rather than discard them.
1467 kes First cut of adding .mod to the run command.
1468 kes Implement auto display of messages in bat.
1469 kes Enhanced preferences to allow all Bacula output to be
1472 kes Try to make bsmtp date routines more generic.
1473 kes Fixed bug #856 autochanger documentation.
1474 kes Rework bsmtp date editing for Win32. This fixes bug #854.
1475 kes Add new cats entry point so Win32 builds.
1477 kes Attempt to fix bsmtp date editing on OSes without %z editing.
1479 kes Do better checking for the MySQL 64 bit libraries looking for both
1480 .a and .so libraries.
1481 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
1482 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
1483 kes Require the thread safe version of MySQL during configure. Thanks
1484 to Andre Noll for pointing this out.
1485 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
1486 continuing in migration code.
1487 kes Apply implementation of tray-monitor font derived from gnome-console
1488 submitted by Andreas Piesk <a.piesk@gmx.net>
1490 kes Eliminate important memory loss in SQLite
1491 kes Fixed the batch insert MySQL thread specific data that was not
1492 being freed. See cats/mysql.c:db_thread_cleanup().
1493 kes Fix restore before command.
1494 kes Convert old hdr.name to name() in a few places.
1495 kes Implement update jobid command.
1496 kes Return all time_t dates in db_get_job_record()
1497 kes Stop watchdog in SD earlier.
1498 kes Put Pool just after Storage in please mount message.
1499 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
1502 kes Update the po files.
1503 kes Fix Verify InitCatalog by making it cache attributes.
1505 kes Change name bacula-bat to bat for man 1 page to correspond to
1507 kes Check for client and store NULL pointers in status command. This
1509 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
1510 kes Fix sign extended editing of %p.
1511 kes Clean out a little old #ifdefing in cats/mysql.c
1513 kes If time diff between DIR and FD is more than 600 seconds convert
1514 INFO message to WARNING.
1515 kes Implement heap size display in status for all daemons.
1516 kes Attempt to fix MySQL db open memory loss (not successfull).
1517 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
1518 kes Eliminate memory loss in MySQL (possibly other SQLs) during
1519 Query. This looks like a MySQL but but by doing extra releases,
1520 the memory goes away. This should fix bug #847.
1522 kes When backup fails, cancel SD before waiting for sd termination.
1523 kes If SD is waiting for FD to connect during cancel, wake up the
1525 kes Fix fsf code so that errno is correctly reported.
1526 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
1528 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
1529 so that Bacula doesn't later stumble into a seg fault.
1530 kes Use the term Restore Client in the restore Job report.
1531 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
1532 the original job's FileSetId.
1533 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
1534 spooling in migration jobs. Not yet tested.
1535 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
1536 reading conf file from a pipe. However, do it with open_bpipe()
1537 rather than popen. Not yet tested.
1539 kes Fix an ugly bug where the VolCatBytes were getting updated
1541 kes Implement bconsole memory command that prints current memory
1542 usage, plus smartalloc dump.
1543 kes Clarify some error messages in backup, admin, and migrate.
1544 kes Shrink label dialog to smaller size.
1545 kes Invert Cancel OK buttons on restore to be OK Cancel.
1546 kes More strerror() to bstrerror() conversions.
1548 kes Start implementing bstrerror() in place of strerror().
1549 kes Stripping path -- seems to work.
1551 kes Prevent door and port files from being restored (mostly
1553 kes Free an unreleased buffer in compat code.
1554 kes Change console Job name from *Console* to -Console- to eliminate
1555 Win32 filename problems. Put Win32 path separator when creating
1556 Console file. This fixes bug #846.
1557 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
1559 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
1561 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
1562 to force Win32 error message.
1564 kes First cut strip path. The data should be passed to the FD,
1565 but nothing is done with it yet.
1566 kes Enhance the digest and signature routines in the crypto
1567 library to accept a JCR and to use it to print error messages
1568 so that they will go in the Job report rather than the daemon's
1570 kes Simplify some of the verify signature code.
1571 kes Simplify a few of the alternative returns in the signature
1574 ebl Use only POSIX regex instead of GNU regex in breg.c for
1575 File relocation. It fix broken freebsd compilation.
1576 kes Convert all other Dir files to use new ua class message
1578 kes Tentative fix for missing digest signature in bug 807.
1579 kes Correct handle problem in new win32_ftruncate routine.
1580 kes Convert ua_purge.c and ua_update.c to use new ua class
1581 message routines for bat.
1583 kes Correct incorrect installation of LICENSE in Win32 installer.
1584 kes Display LICENSE at the beginning of the Win32 install.
1585 kes Attempt to correct the need for the png files to be installed
1587 kes Reapply my bat.conf install script in qt-console. I think I
1588 editted bat.pro instead of bat.pro.in and it was lost.
1589 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
1590 the /var/lock/subsys for subsysdir. Also corrects typos in the
1593 kes First cut update job.
1594 kes Correct configure to include qmake of src/qt-console directory.
1596 kes Make restore job yes/mod/no print in one command so GUI works.
1597 kes First cut implementing backup and restore client.
1598 kes Correct editing in Verify output that caused a seg fault.
1600 kes Insure that bat.conf is not overwritten during installation.
1601 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
1602 while I was implementing migration in March 2006 !
1604 ebl Cleanup file relocation, using char *RegexWhere instead of
1605 char *where + bool where_use_regexp
1606 kes Update some manpages and add bat manpage.
1607 kes Make a first cut at converting bacula.spec.in for bwx-console
1609 kes Apply patch from John Goerzen to add hostname as fourth argument
1610 to make_catalog_backup script.
1611 kes Fix typos I introduced into bsmtp.c
1612 kes Make pm_strxxx() routines handle input of NULL pointer. This
1613 is to protect from NULL pointers returned from SQL databases.
1614 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
1615 kes Add more debug to FIFO code -- fix fifo regression test.
1617 kes Implement posix_fadvise in FD, and for reading spool files in SD.
1618 kes Add thread timer to bnet_connect() to break from OS if wait time
1621 kes Update Win32 build to include new files, new symbols, and
1623 kes Implement socket level heartbeat (tcp_keepidle)
1624 ebl Commit File relocation patch
1625 kes Make bat have 'make install' target.
1626 kes Warn during install if old gnome-console binary found.
1627 kes Warn during install if old wx-console binary found.
1628 kes Add -8 option to bsmtp command line to add content type utf-8.
1629 Fixes bug #809. (Character coding problem in bsmtp).
1630 kes If < is found in target (from, to, cc) then do not enclose the
1631 target in < > in bsmtp. Fixes bug #772 (malformed address).
1632 kes When printing certain items in dbcheck, stop after 300000.
1633 Fixes bug #822. (dbcheck loops).
1634 kes Incorrect status in Dir after waiting for mount with poll set.
1637 kes Extend idea of Prefer Mounted Volumes to mean a volume about
1639 kes Print waiting to reserve a device every 5 mins.
1641 kes Don't call close_part in label.c if tape and relabel.
1642 kes Don't free volume if busy in close() -- should help with
1644 ebl Fix #824 RunScript bug (After script could be execute twice)
1645 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
1646 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
1647 Add a regression script to test RunScript
1649 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
1652 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
1653 deprecated. No additional bugs will be fixed, and they will be dropped
1654 in a future release (probably 2.4.0).
1655 kes Change name of wx-console to bwx-console to make it more Bacula
1657 kes Change the name of gnome-console to bgnome-console to make it
1660 kes Some time in March, a Feature Request with patch from Jorj Bauer
1661 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
1663 The ability for the director to validate a Client (FD) CN against
1664 an arbitrary set of patterns rather than the hostname, with
1665 A new 'TLS Allowed CN' set of directives which are implemented
1666 in the Client resource. Then pattern matching is used in place
1667 of hostname matching against the Certificate's CN. As an example, we
1668 have certificates which (a) use a local CA, and (b) have a CN of the
1670 kes Add new/changed entry points to Win32 build
1671 kes Create unaccepted-projects for projects that are not accepted.
1672 kes Simplify locking in the reservations system.
1673 kes Add more debug code in reservations.
1674 kes Make sure error condition on reserving a volume is handled correctly.
1675 kes Correct handling of volume_in_use.
1676 kes Correct handling of initializing a device.
1677 kes Move handling of broadcasting releasing a device into release_device().
1678 kes Correct attaching dcr to dev so that it is only done if device
1679 is properly initiated.
1681 kes Locking debug level tweaks in SD.
1682 kes Tweak new Volume code.
1684 kes Add exec external-command [wait-seconds] to bconsole. This
1685 executes the external-command. Note! normally external-command
1686 should be enclosed in double quotes.
1687 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
1688 it should normally be off in a production system.
1690 kes Implement die command for SD so that we can force it to dump.
1691 kes Implement SD lock debug code.
1692 kes Implement new algorithm for keeping Volume list in SD. It
1693 is now owned by the device.
1695 kes Implement new code for freeing in use volumes that should
1696 resolve if not all, some of the problems of multiple drive
1697 tape conflicts described in bug 801.
1699 kes Fix gui/bacula-web/images files in svn.
1700 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
1702 ebl Fix a bug in batch mode (in string escape)
1703 kes Correct migration prune SQL typo that crept in in a
1704 recent 2.1.x change.
1706 kes Move bnet_despool() into class in bsock.c
1707 kes Modify job report to include director name and Build OS.
1708 kes Move drop root privilege and check_catalog() before fork.
1709 kes Add update database scripts (version 9 to 10) to updatedb directory.
1711 ebl Check size and age of each file after its backup to see if
1712 it has changed during backup, if 'checkfilechanges' is set.
1713 The FD will do an extra check (stat(2)) after
1714 each file backup. mtime, ctime and size are compared with
1715 'before backup' information. If time or size mismatch, an
1716 error message will be generated. You must upgrade FD to use it.
1718 kes Make database name and user configurable
1719 --with-db-name=xxx --with-db-user=xxx
1720 kes Add back database type to message.c for debugging.
1722 kes Implement dir_sql() which issues an SQL query.
1723 kes Modify bat medialist to use dir_sql() and do some minor C++
1724 formatting as well as eliminating a number of pointers, simplifing
1727 kes Fix some of the mtx-changer grep commands for tape label readers.
1728 kes Convert a number of bsendmsg into the appropriate send/warning/error
1729 message class calls.
1730 kes Suppress the using database message in the .sql command.
1731 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
1733 kes Add context menu for floating a window.
1734 kes Some minor cleanup and name changes in qt-console
1735 kes Add doing mt setblk 0 in Win32 mtx-changer.
1736 kes Apply Martin's bug fix to move definition of ENODATA for
1738 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
1739 sqlite2 and sqlite3.
1741 kes More pruning cleanup.
1742 kes Turn on wait_for_drive by default in mtx-changer.
1743 kes Turn on Batch insert code by default as it now passes regression.
1744 kes Add ./configure --enable-bat to enable building of Bat.
1745 No install yet though.
1747 kes Implement a new .sql command for bat.
1748 kes Implement code to turn off pruning in obtaining the next volume.
1749 Pruning is turned off for the status dir command, but turned on
1750 for SD requests and for the list nextvolume command.
1752 kes Correct Qmsg() that was not updated correctly when committing a
1753 previous change (probably the recent TLS patch).
1755 kes Write new subroutine is_volume_purged() that explicitly checks
1756 if the Volume is purged, and if so marks it as such. This should
1757 resolve problems reported about needing to mount twice to recycle
1759 kes Rewrite pruning algorithm to do more work in the SQL engine, and
1760 to pass a list of JobIds to be deleted to SQL. Also, minimize the
1761 amount of duplicated code.
1762 kes Do volume pruning only for the Media Type desired (reduces pruning time
1763 if multiple Media Types are in the same pool).
1764 kes Implement more detailed info in the Job report for the Bacula version
1766 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
1768 ebl Add bbatch tool to bench database and insert mode.
1769 Fix sql quote stuff in batch mode
1770 Fix sql stuff for mysql
1772 kes Correct problems with am/pm scheduling. Fixes bug #808.
1773 kes Implement new prunning code that prunes up to 1000 jobs at
1774 the same time. The same technique can be applied to a number
1775 of other prune/purge subroutines.
1776 kes Add an insanity check when starting a new tape job to ensure
1777 that the tape position has not been changed. If so fail the
1779 kes Fix Win32 build for dlls to add the folllowing:
1780 src/lib/bsock.c -- new file with new entry points
1781 src/lib/dlist.c -- new entry points
1782 src/cats/sql_create.c -- new entry point
1783 src/cats/sql_cmds.c -- new DATA item exported
1785 ebl batch mode cleanup bscan-test is ok now.
1786 kes Implement SD code to check length of disk volume before appending.
1788 kes Correct return status on db_batch... routines.
1789 kes Add call to db_write_batch_file_records() to migration code.
1790 ebl Fix AfterJob timing
1791 kes Move the checking of the database in initializion of the Director
1792 to after we drop privileges. This avoids the need for both root
1793 and bacula access to the DB.
1794 kes Correct a misplaced variable definition in src/filed/backup.c
1795 kes Correct how the new batch insert db_create_attributes_record()
1796 uses the arguments. Caused a seg fault in bscan.
1797 kes Implement lock() and unlock() methods in DEVICE class.
1798 Implement block() and set_block(xx) methods in DEVICE class.
1799 kes Modify bnet_connect() so that it uses time() to check for the
1800 wait time expiring (on some OSes, some system calls may not
1801 return immediately).
1802 kes Modify Verify to obtain the previous JobId when it is actually
1803 running rather than at schedule time (as it was in 1.38.x).
1804 kes Fix src/job.c to handle MaxWaitTime correctly. This should
1806 kes When checking pid in pid file, continue running if the pid is
1807 the same as ours. This occurs on IRIX after a system crash.
1810 kes Extend new GUI API.
1811 kes Make the ua structure a class, and implement send_msg(),
1812 error_msg(), warning_msg(), and info_msg().
1814 kes Apply fix from for building wx-console on the Mac from
1816 kes Implement new select mechanism for GUI programs.
1817 kes Reorganize initialization of stackedWidgets in bat.
1819 kes Add updated nagios plugin supplied by Christian Masopust.
1821 kes More bat implementation.
1822 kes File migrate bug with Pool Occupancy using mediaid instead
1823 of jobids. Fixes bug #795.
1824 kes Fix orphaned buffers in filed backup and verify due to
1825 crypto buffers not freed during errors. Fixes bug #789.
1826 kes Extend new GUI api code to tree commands.
1827 kes Ensure that tree and dot commands check console ACLs.
1828 kes Permit marking directory with trailing slash.
1829 kes Allow 20 console connections (instead of only 10).
1831 kes Add smartctl call to bacula-sd.conf as an example of getting
1834 kes Modify jobq.c to let simultaneous restore jobs run. This may
1835 cause them to fail if they cannot get a drive.
1836 kes Add Client Connect Wait to Storage daemon to permit users to
1837 modify the time the SD waits for a FD connection.
1839 kes Correct virtual changer check which was backwards. This caused
1840 volumes to be unloaded into slots already occupied.
1842 kes Apply Command ACL filter to JobId list in restore command.
1843 kes Correct typeo in var.c patch.
1845 kes Don't let Bacula prune File or Job records for the current Job.
1846 kes Fix variable substitution pad + inc bug reported (with patch)
1849 kes Correct SQLite log table index as reported by Luca Berra.
1851 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
1853 kes Begin implementing new comm signals for API.
1854 kes Fix a few places in lib/message.c where the open fd may
1856 kes Continue implementing lib/bsock.c (real class). Make jcr,
1857 who, host, and port private. There are new methods to access
1858 them for non-class use. This required touching a number of files.
1860 kes Add LANG=C to autoconf/randpass so it works with languages other
1861 than English. Fixes bug #788.
1863 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
1865 You will not be able to generate Include/Exclude list any more.
1866 It will be fixed soon.
1867 If you want to use this, you can apply
1868 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
1870 kes Restore of sockets created false error messages because Bacula
1871 no longer restores sockets, but the code was still trying to
1872 set the attributes on a non-existent file. Reported by a user.
1873 ebl finish RecyclePool feature
1874 Media will takes Pool.RecyclePool
1875 when moving from Scratch to a Pool or when user will do
1876 update volume=xxx frompool
1877 To use it, add RecyclePool = aPool to your Pool resource
1880 RecyclePool = Scratch
1884 kes Expand new BSOCK class adding signal() and new BNET signals.
1885 kes Begin enhancing the dot commands adding a new API function
1886 that returns more information and will make it easier
1887 to interface to the Director from a program.
1889 kes Make DEVICE fd private. Its new name is m_fd, and can be
1890 obtained with dev->fd() outside the class. This is the
1891 first of many DEVICE members to be made private.
1892 kes Implement Michael Renner's idea on having a virtual disk
1893 changer. I made some minor modifications (e.g. I did not
1894 implement the Virtual Changer directive, but simply set
1895 the Changer Command to an empty string.
1897 kes Implement a BSOCK send() method that writes the whole record
1898 in a single write() request rather than in two.
1899 ebl add update volume=xxx recyclepool=yyyy
1900 volume takes recyclepool from pool when using update volume=xxx from pool
1902 kes Fix encryption deblocking bug, which caused some restored files
1903 to be truncated. This fixes bug #763.
1904 kes Add FD event sequence order prepared by Eric -- for RunScripts.
1905 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
1907 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
1908 ebl Use btime_t instead of uint64_t in media patch.
1910 kes Optimize the use of the database a bit in the Status dir command.
1911 Only open it when needed, ensure that if any previous database
1912 was opened, it is closed.
1914 kes Correct VolCatBytes bug from media patch.
1915 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
1916 in the case of orphaned records.
1917 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
1918 and File records in 300K chunks to be more efficient. This
1919 idea came from Juan Luis Frances (if I remember right).
1920 kes Apply Eric's scratch patch that moves a purged Volume to
1921 the RecyclePool. Question: how is RecyclePool set? what
1922 happens to the ScratchPool?
1923 kes Apply Eric's media patch that collects read/write media
1924 times as well as byte counts. This patch requires a
1925 simultaneous upgrade of the DIR and SD. Note, there
1926 should be some way to turn off timing. I'm not sure
1927 times are in Bacula units.
1928 kes Apply Eric's batch-insert patch.
1930 kes Update projects list.
1932 kes Implement Include/Exclude file lists in FD as dlists using
1933 the new dlistString class. This permits efficiently having
1934 large include/exclude lists and completes project Item 25.
1935 kes Fix dird/ua_cmds.c so that a cancel command checks if the
1936 console is authorized to cancel the job. This fixes bug
1938 kes Modify SD so that the VolCatJobs medium record is updated
1939 at the beginning of a Job rather than the end. This
1940 fixes bug #775 where exceeding MaxVolJobs caused jobs
1942 kes Added a mutex around getting and setting Volume information
1943 so that multiple simultaneous jobs will single thread.
1945 Switch to using Subversion
1946 kes Remove src/pygtk-console/ from configure
1948 kes Delete src/lib/btree.c from win32 build, then add rblist.c
1949 plus the entrypoints.
1950 kes Apply patch supplied that corrects debug print
1951 in canceling jobs for max run time. Supplied as
1952 part of bug #621, which was previously fixed.
1954 kes Test on job_canceled() and sd_msg_thread_done inside
1955 loop starting the message thread to avoid a race condition.
1957 kes Remove rl_catch_signal from console.c as it conflicted
1958 with the header definition. Fixes bug #765.
1959 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
1961 kes Clarify some stored/acquire messages to indicate if the
1962 problem is with read or append.
1964 kes Fix memory leak with storage ids in cats/sql_get.c
1965 kes Terminate watchdog earlier to avoid reference to released
1966 memory -- reported by Jason Austin.
1967 kes Move closing the database from jobq.c to the director daemon
1968 termination routine. This fixes memory leaks for shadow jobs
1969 (i.e. migration jobs).
1970 kes Free up the unique jobid chain items in migrate.c. This fixes
1971 a memory leak problem.
1972 kes Convert some ugly looking for statements to use foreach_alist
1973 in findlib/find.c. This will facilitate converting the structures
1974 to use dlist (for large include/exclude lists).
1975 kes Fix a bug in the btree.c and btree.h routines, then rename them
1976 rblist and add them to be built in src/lib. Include some new
1977 methods written by Rudolf Cejka that make the code more readable
1978 (hides some of the ugly casting).
1979 kes Add set_next() and set_prev() methods which make the code much more
1980 readable. Also add a new dlistString class that facilitates storing
1981 strings in dlists. To be used in the large include/exclude lists.
1982 kes Make some trivial modifications to lib/tree.h that use rblist
1983 rather than dlist for storing the tree links. This was suggested
1984 by Rudolf Cejka. The result of this is that the restore tree now
1985 uses red-black binary trees rather than simple linked lists. This
1986 should give rather dramatic speed improvements for directories
1987 contining large numbers of directories/files (more than 10000).
1989 kes Fix maxruntime bug #621.
1991 ebl Implement the include JobID in spool file name project.
1992 kes Reorder projects file in order determined by Jan 2007 vote.
1993 kes Implement item #12 on project list -- quick release of FD by
1995 kes Fix open of SQLite3 db where user does not have write permission
1996 so that DIR does not crash. Fixes bug #761.
1998 kes Add back missing @ in Win32 Makefile.
1999 kes Change 'Device not configured to autolabel' from INFO
2001 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
2002 which should restart an indefinite # of times.
2003 kes Fix configure --help to print --with-mysql[=DIR]. Same for
2004 other DIR specifications.
2006 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
2007 Fix path quoting in SQLite scripts.
2008 Fix problems with SHGetFolderPath.
2010 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
2012 kes Fix Job restart on error bug that promotes an Inc to a Full
2013 backup. This should fix bug #755.
2014 kes Add qt-console and first cut of code.
2018 kes Fix Bacula->Documentation link on Win32 to point to index.html
2019 instead of bacula.html. Fixed bug #750.
2020 kes Return JobId in db_get_job_record() when JobId==0. This should
2022 kes Do not release source pointers when restarting a failed job.
2024 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
2025 This *should* fix bug #747.
2026 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
2029 kes Modify USTORE constructor to set an empty store_source string,
2030 and don't copy the store_source string in a cancel. Hopefully
2031 this will fix Arno's seg fault, bug #744.
2032 kes Add back code to disable conio in configure. Fixes bug #743.
2033 kes Correct the Options scanner in the FD to correctly handle
2034 SHA1 option, which was eating the next option. Reported by
2036 kes Add code to indicate when the SD is spooling, spool wait, and
2037 despooling as requested by Alan Brown.
2039 Version 2.0.0 released: 4 January 2007