1 Technical notes on version 2.5
9 Multiple command/console per runscript
10 console command in runscript
13 State file updated on job term
16 Duplicate Job directives
17 - Allow Duplicate Jobs
18 - Allow Higher Duplicates
19 - Cancel Queued Duplicates
20 - Cancel Running Duplicates
21 Ensure they work with RerunFailedLevels
25 Improved status commands for Bat
26 Spooling/despooling status
27 Implement ftruncate for NFS devices
28 Add long term statistics job table
34 kes Fix verify jobs to work again.
36 kes Virtual Backup tweaks -- it is close to working.
38 kes Ensure that SD tried to mount a volume not in an autochanger
39 at least once before asking for operator intervention.
40 kes Make SD aware of Virtual Backup jobs.
41 kes Add VirtualFull for bat.
42 kes Changes to get read storage correct for Virtual Backup.
44 kes Remove old code from label.c
45 kes Split display_display_info() out of write_bsr_file()
46 kes do_vbackup_init() working -- i.e. bootstrap file built.
47 kes Change Bacula trademark owner from John Walker to Kern Sibbald
48 kes First non-working cut of vbackup
49 kes Correct FD heartbeat code to use volatile variable accessed by
51 kes Zero thread id with memset if on Win32 in case it is a struct.
52 kes If cannot create JobMedia record, continue to try to write eof
53 and clean up in block.c
55 kes Add code to interface OpenSSL to new Win32 pthreads code which
56 used a structure for thread_t.
58 ebl tweak bat for win32 compilation
60 ebl Remove tokyo cabinet from the source
61 ebl Update configure/autoconf to support berkeley DB
62 ebl Add a sort to db_get_file_list() to improve bsr construction time.
64 kes Add a mtx-changer.conf file that is not overwritten during
65 an upgrade. It fully configures the mtx-changer script.
66 kes Clear in-use bit on vol when unused while swapping.
68 kes Remove sleep at end of ./bacula
69 kes Clear hash packet for hardlinked files correctly. This corrects
70 a long standing bug where hardlinked files selected individually
71 would occasionally not be restored.
73 kes Apply Eric's patch to ensure that autoprune does not return
74 a Volume not in the autochanger unless requested to do so.
75 kes Correct bat restore display of multiple drives. This fixes
77 kes Do find_a_volume() each time an unload is done. This
78 fixes the failure of maxvol2-test.
80 kes Add some SD debug code.
81 kes Do find_a_volume() each time an unload is done.
82 kes Apply Joao's DBI patch that adds easier configuration of DBI drivers,
83 and adds --with-db-port to ./configure.
84 kes Use Qmsg() in job.c watchdog callback.
86 kes Release main control rwlock if ABORTing.
87 kes Make watchdog connect timeout queue messages rather than sending
88 directly to avoid lock conflicts with the real thread.
89 kes Add const char in dbd.c to avoid compiler warnings.
90 kes Fix python compiler string warning. Note, IMO the GNU C++
91 compiler guys have made a *very* bad change to their compiler.
92 They now force all strings to be 'const' unless you explicitly
93 cast them, which is extremely ugly and ruins nice code as well
94 as creates a lot of useless work.
96 kes Fix mtx-changer to detect both versions of Ubuntu (Debian)
97 mt. This fixes bug #1116.
98 kes Add const in python files to reduce compiler warnings.
99 This may have to be backed out because of later compiler
101 kes Fix failure of 2drive-concurrent-test. Always read label;
102 clear_unload() only after drive is defined in acquire_for_read().
104 kes Generally clean up the manual tape loading code. The main
105 conceptual change is that when a volume is marked to be unloaded,
106 its volume name is retained, and it is only marked as unloaded
107 when either the autoloader says it is unloaded or another tape
108 is read on that drive.
110 kes Add debug code and refactor subroutine in stored/mount.c
111 kes Fix format problem in bscan output reported in bug #1105.
112 ebl Fix get_next_volume_for_append logic with autochanger
113 - use pruned volumes if found
114 - don't reset the inchanger flag after getting a recycled volume
116 Fix recycle_oldest_purged_volume to take InChanger flag in account
118 ebl Add mmap/unmmap implementation for tokyodbm under win32
120 kes Make first step toward eliminating globals from config
121 scanning. Also should be a workaround for FORTIFY_SOURCE
122 GNU C bug -- fixes bug #1042.
124 kes Apply duplicate job tests to restarted jobs.
125 kes Copy more data when restarting a job so that run
126 overrides are kept. This should fix bug #1094.
128 kes More word alignment cleanup.
129 kes Fix bug where SD did not ask operator if the device could not
130 be opened. Reported by Eric.
132 kes Add dbuser to DIR conf file (replaces user).
133 kes Add --with-db-password to ./configure
134 kes Fix regress to handle db_password.
135 ebl Add new "status storage slots" that list autochanger
137 ebl Update vtape driver to compile only under Linux.
138 ebl Fix a bug when restoring with a wrong mediatype.
140 kes Eliminate ints from conf files and structures to avoid
141 word alignment problems
143 kes Fix bug reported by Scott Barninger where the bacula script
144 refers to scripts in the wrong directory. Needed to meet the
145 requirements of recent FHS location changes.
146 ebl Disable vtape for FreeBSD.
148 ebl Modify disk-changer to check if slot contains something before
151 ebl Fix vtape on win32 and debian.
152 ebl Fix autoselect patch (cause segfault).
154 ebl Fix autoselect option broken for a while. Fix #1089. Need some
155 work with StorageId to be able to use a particular drive in a
158 ebl Rename vtape to vtape.
159 ebl Update vtape driver.
161 ebl Modify vtape driver to avoid sparse file.
162 kes Add make clean of qt-source directory during ./configure
163 kes Store last block number written to tape in DEVICE and
164 use it for testing for correct last block on EOT.
166 Release Version 2.4.0:
170 kes Make sure to clear JS_WaitMedia when operator mounts a Volume.
171 This fixes bug #1095.
173 kes Add create_postgresql_database.sql to Win32 installer. Should
174 fix problem reported by Juilio Monteiro.
175 kes Get correct slot when auto unloading a device. This fixes bug
178 kes Fix multiple media restore.
179 kes Make DEVICE Slot private and access it via a method.
180 Allows better control over when it is set and cleared.
181 kes Fix possible seg fault if SQL error.
183 kes Add Martin's fixes to argument scanning for the estimate
184 command. This fixes bug #1093.
185 kes Add debug code to SD.
186 kes Fix renaming a Volume, which used the wrong Volume name.
188 kes If operator has rewind tape, print warning, release tape and
189 try once more. If tape is positioned somewhere, something went
190 wrong, so mark the tape in error and try once more. Previously
191 this error was fatal, now it produces an error message.
192 kes Ensure correct volume name displayed during restore
193 kes Ensure that Volume is mounted for restore.
195 kes Fix a few more Coverity reported problems.
197 kes Apply Allan Black's status dir job count patch.
198 ebl Add information about IMPORT/EXPORT slots in mtx-script.
199 kes Enhance a couple of SD debug messages.
200 kes Tweak unload flag setting and ensure it is set during swap.
202 ebl Fix #1091 about bad output in estimate command.
204 kes Modify autochanger locking to attempt to avoid race
206 kes Make sure device not busy before doing label command.
207 kes Display open() errors except when polling. Previously too
208 many were suppressed. This should fix bug #1070.
209 kes Fix Win32 reparse points. Bacula will not recurse into any
210 reparse point directory, including mount points, unless the
211 directory is explicitly mentioned at the top level (same as
212 with Unix). A file that is linked to another file will be
213 backed up -- much as Unix does for hardlinked files.
214 This fixes bug #1041.
216 kes Remove double quotes from ChangeLog and ReleaseNotes
217 kes Remove StorageId test when pruning and recycling (Eric's changes).
218 kes Remove old form of locking when getting volumes -- causes deadlock.
219 kes Change bat dirstat layoutWidget to dirstatlayoutWidget to make
220 the name unique and to eliminate compile time error.
221 kes Add accurate.o to Win32 FD Makefile
223 kes Fix cats dll build on Win32 after db_update_job_end_record
224 calling sequence change.
225 ebl Switch to tokyo dbm instead of htable in accurate code
226 ebl Include tokyo dbm to bacula source tree
228 kes Fix buffer overruns detected by Coverity.
230 kes Tweak joblog display.
232 kes Implement --without-qwt
233 kes Fix layout of restore tree dialog
234 kes Add configure bat QWT libraries, so that bat can be built
235 with or without the QWT libaries.
237 ebl Add dummy tape driver for regression tests.
238 kes Make sure we unload the right slot when swapping.
240 kes Add debug times, reduce size of two-pool-changer test
242 ebl Tweak autoconf scripts for vtape
244 kes Improve SD reserve debug code.
245 kes Testing an improvement to free up volumes no longer in use.
247 kes Rework SD acquire for read to handle autochanger Volume
249 kes Implement regression that explicitly tests swapping a Volume
250 from one drive to another.
251 kes Enhance disk-changer to detect most error conditions.
252 kes Fix SD code so that it properly swaps a Volume between drives.
253 This fixes bug #1083.
255 kes Apply libdbi patch from Joao Freitas for regress and for
256 Bacula trunk. Regress now works with libdbi. Nice.
257 kes Apply .nobackup patch from bug #1077 submitted by
259 kes Apply Bastian Friedrich's patch that adds %p to edit the pool
260 name into jobs cloned via the run directive.
262 kes Prevent a Volume that is being swapped from being freed from
263 the volume list. This will most likely fix, at least partially,
265 kes Fix strippath so that it does not get a buffer overrun and crash FD.
266 This fixes bug #1078.
267 kes Remove 50 millisec wait in SD that broke debugger.
268 ebl Add MaxRunSchedTime option that specifies the maximum allowed time
269 that a job may run, counted from when the job was scheduled.
270 ebl Fix MaxWaitTime option that specifies the maximum allowed time that
271 a job may block waiting for a resource, counted from when the job starts
272 ebl Rename (add) Max(Incr|Diff|Full)WaitTime to Max(Incr|Diff|Full)RunTime
273 kes Apply patch from bug #1076 by Tullio Andreatta <t.andreatta@troppoavanti.it>
274 that implements multiple commands per line in the console when using
275 readline. Modify the default to use a semicolon as the command separator.
277 ebl Fix SQL query in migration code.
278 ebl Make accurate mode with hash disk pass regression tests
280 ebl Implement first cut of accurate backup with hash disk.
282 kes Force unload of volume when wrong volume mounted in SD.
284 kes Fix bat seg fault at termination.
285 kes Add Bacula generated version to bat about box.
288 kes Experiment with allowing multiple read jobs.
289 kes Move final volume swapping code to DCR method and
290 call it from acquire_for_read().
291 kes When wrong volume is mounted during read, unload_autochanger.
293 kes Integrate the libdbi changes from Joao Henrique Freitas
295 kes Stop searching for Volumes in SD askdir if DIR returns the
296 same volume name twice in a row.
297 kes Close bat console windows first to eliminate error message
300 kes Tweak the swap Volume from one drive to another code so that
301 it now seems to work.
302 kes Resolve several problems with recycling that broke the new
303 code (these problems are in 2.2.9 as well).
304 kes Remove the volume lock when calling the sysop code.
305 kes Don't mark a reserved volume with no writers as unused otherwise
308 kes Rework class structures for VOLRES, DCR, and DEVICE to make
309 the method names a bit more logical, and for more logically
310 handling the responsibilities.
312 kes Remove redundant code in terminating the scheduler that just
313 causes a seg fault in many cases.
314 kes Cleanup releasing a volume and make it a DCR method.
315 kes Improve algorithm for detecting pre-reserved volume and
318 kes Tweak volume swapping code so it works.
319 kes Correct name overloading in mount.c
320 kes Replace released flag in VOLRES with reserved and add access
321 methods for the VOLRES class.
322 kes Prevent volume from being released while being swapped.
323 kes Apply Bastian Friedrich's edit codes patch for the bpipe-fd
325 kes Apply Bastial Friedrich's edit pool=%p patch for run clone
327 kes Refactor parts of stored/mount.c
329 ebl Add sanity checks for VolWriteTime and VolReadTime
330 ebl Take care of bad clock changes while computing VolWriteTime
331 and VolReadTime. This should fix or limit #1066
332 kes Correct error string numbers in dird/catreq.c
333 kes Restructure reserving, acquiring, and mounting volumes. Calls to
334 autochanger are deferred for mount.c -- simplifes the code.
336 kes Do not prune any running job. It just fails the job.
337 kes Lock the volumes when changing dev->reserved_device and marking
338 the volume unused otherwise the device can get reserved by
339 another job before the volume is released, thus blocking it.
341 kes Correctly detect Ubuntu systems, and add ubuntu platform directory.
342 kes Fix bug #1063, reuse of freed ptr in list nextvol.
343 kes Release regex compile buffer in filed/job.c
344 kes Add proper type of const char in sql_create.c
345 kes Turn off debug in daemon termination routines
346 kes Move free_volume_list() before devices are freed in stored.c
347 kes Fix reference to uninitalized stack variables in bregex.c.
348 This should correct bug #1067.
350 kes Fix possible seg fault in SD when freeing a volume entry.
352 kes Implement unload_dev() before swap device.
353 ebl Add statistics prunning with option and menu
354 kes Separate unload_dev() from unload_other_device() in autochanger.c
356 kes Apply patch from bug #1069 that corrects spurious error messages
357 when ACLs enabled on SGI but no ACL exists.
358 ebl Fix small segfault in bacula-sd when debug level is 500
359 kes Modify run_program() and run_program_full_output() to use
360 call by reference for the results string. This corrects a long
361 standing problem where the address of the string may be changed
362 in the subroutine but not in the calling program.
364 kes Re-enable code to remember last volume mounted on a non-tape
366 kes Add patch supplied in bug #1068 that fixes a SD crash when using
367 a Virtual autochanger.
368 kes Generate correct JobMedia records during spooling/despooling when
369 running concurrent jobs. Thanks to Tom Ivar Helbekkmo
370 <tih@hamartun.priv.no> for excellent analysis and testing.
372 kes Tweak hash algorithm for htable using Martin Simmons idea
373 for doing a circular shift.
374 kes Remember what volume is in VTLs (previously turned off for
376 kes Analysis of JobMedia records by Tom Ivar Helbekkmo <tih@hamartun.priv.no>
377 pointed out some problems in creating JobMedia records during
378 spooling with concurrent jobs. Fix the problem by updating the
379 start file position before despooling and generate a jobmedia
380 record at the end of despooling.
382 kes Fix handling of JobMedia records during spooling and when a
383 Volume is changed without actually writing data to the Volume.
385 kes Rework certain SD locking based on gdb tracebacks of deadlocks
386 sent by Eric. This code now uses only the volume_lock() rather
387 than the reservations lock when at EOM and acquiring a new
389 kes Ensure only one exit point in several subroutines.
391 kes Implement bsock code to permit locking. Use the new code in Verify
392 in the FD to prevent the heartbeat thread from disrupting the Verify
393 data sent to the Dir.
394 kes Modify SD locking to eliminate locking the reservations system from
395 outside the system. Use the volume lock when getting media data
396 and reserving a new volume at end of media.
397 kes Add Eric's volume_unused() fix to stored.c so that Volumes found
398 when SD starts are not locked into place.
400 kes Fix error compiling runscript code on 64 bit machines.
401 kes Tweak Win32 mount point code.
402 kes Fix a couple of bugs in the accurate code (bad sscanf, buffer not
403 cleared giving bad file estimate).
404 kes Implement BIG_MALLOC in htable code. Runs 2.5 times faster for
407 kes Keep Schedule run lists in order as suggested by
410 kes Implement autostart scripts for Debian.
411 ebl Implement upgrade catalog scripts.
413 ebl Apply jobstat patch for long term statistics. Have to implement
414 purge stats command and upgrade scripts.
415 kes Fix mtx-changer.in for broken Debian mt program.
417 kes Fix large number of JobMedia records reported by Eric Bollengier.
419 kes Apply doc fix from bug #1062.
420 kes Resolve crash and improper restore wx-console Win32 restore
421 GUI. Fixes bug #1065.
422 kes Update Win32 wxWidgets to latest version.
423 kes Attempt to do correct handling of Win32 mount points. Should
425 kes Fix Win32 FD backup/restore memory leak due to improper termination
426 of BackupRead/Write. This fixes bug# 1038.
428 ebl Reduce memory usage for accurate backup, working only with ctime
429 and mtime. (not all Lstat field)
430 About 40MB for my Linux system (400.000 files)
432 kes Add dcr->reserved_volume flag that allows us to release a volume
433 even if it is not vol->released. This allows maxvol2 to work when
434 Volumes expire and we are already writing to the device (i.e. a
435 volume is pulled out from under us by another job terminating after
436 we reserve the drive).
438 ebl Permit multiple command/console per runscript definition.
439 RunScript { command = /bin/true ; command = /bin/false ... }
440 ebl Add RunsWhen = AfterVSS to runscript. You can execute a command
441 (restart an application) just after the VSS snapshot on windows.
442 kes Don't zap dcr values during release_volume() as they might
443 have the next Volume to be mounted.
444 kes Fix AIX prototype.
446 kes Second cut of drive switching during backup.
449 kes Update Win32 version of wxWidgets to most recent version.
450 kes Tweak Copy job details.
451 kes Rework dir_find_next_appendable_volume to make a bit more effort
452 to find a suitable volume before giving up.
454 kes Make ask_sysop_to_create... to return if waken from wait.
455 This helps get out of blocked conditions.
456 kes Experimental implementation of switch_device in reservations.
457 kes Implement FD version to allow easier protocol changes.
458 kes Add Plugin Options string -- not yet passed to FD.
459 kes Implement PluginOptions ACL.
461 kes Attempt to correct problems with restores with autochangers and
462 use counts going negative
463 kes Rework SD status command and implement API for bat. Implements
464 header, runing waitreservation, devices, volumes, spooling,
465 and terminated status keywords.
466 .status storage=xxx <keyword>
467 kes Clarify TLS error message by adding double quotes around name.
468 kes Simplify SD/FD status code by putting api flag in STATUS_PKT
469 kes Pass jcr to tls routines so debug messages can be handled better.
470 kes Rework jobq resource allocation code, and possibly fix a bug
471 that caused reference counts to get out of sync.
473 kes Rename fd/dir plugin to use Bacula standard underscore.
474 kes Plugin work -- bring dir up to fd level.
475 kes Start implementation of VTL code
476 kes Fix Win32 build after adding new cats subroutine.
478 kes First cut at Duplicate Job implementation.
480 kes Fix bugs in MaxFullInterval and Implement MaxDiffInterval.
481 kes Start PluginOptions string, and refactor a bit of ua_run.c
482 ebl Apply Allan patch that permit to reset recyclepool.
484 kes Test patch -- possible fix or improvement for bug #1053
485 kes Refactor FD and SD status commands to permit new API code in
486 SD, and to fix Win32 build.
487 kes Win32 build is now working.
489 kes Implement 'MaxFullInterval' and start 'MaxDiffInterval' based on
490 some ideas in patch from Scott Bailey.
491 kes Begin implementation of duplicate Job control.
492 kes Fix some of Win32 build after recent additions.
493 kes Apply patch from Frank Kardel that implements 'honor no dump flag',
494 which causes the FD to detect whether or not the OS has the
495 honor no dump bit (*BSD systems), and if so, to skip backing up
496 any file with this bit set. The feature is enabled by setting
497 'honor no dump flag = yes' in the Options section of a FileSet.
499 kes Correct po warning message with datarootdir
500 kes Implement more code in dird.c to put configuration parsing in
501 a class rather than use globals.
502 kes Restructure SD status command for implementation of bat API
505 kes Suppress incorrect 'Will not descend from x into y' messages.
506 kes Eliminate FORTIFY_CODE=2 bug, and make first cut at removing
507 daemon globals used by parser.
508 kes Apply Joao's patch to separate DB_TYPE and DB_PROG in configure.
510 kes Fix free of plugin_list when none exists.
512 ebl Apply accurate project patch.
514 ebl Fix a segfault when using strip_path option. (Use of pm_strcpy
515 on non-mempool object)
516 kes First cut of converting FD .status to work with bat API.
518 .status client=XXX header
519 .status client=XXX running
520 .status client=XXX terminated
521 kes Implement first cut of Copy Job.
522 kes Implement Catalog in Pool resource. It overrides catalog specified
523 in the Client resource.
525 kes Apply patch (with some difficulties) from Joao Henrique Freitas
526 <joaohf@gmail.com>, which adds support for libdbi as a Bacula
528 kes Add patch from Martin Schmid scm@apsag.com that checks to see if
529 ftruncate() actually works. In the case of some (cheap) NAS devices,
530 it does not, and so recycling NAS Volumes does not work. The code
531 simply unlink()s the file, then recreates it. This fixes bug #1011.
533 kes First incomplete cut of big malloc blocks for htable.
534 kes Tweak plugin code.
536 kes Plugin debug code + tweak a couple bat dialog layouts
538 kes Fix creating first JobMedia record during Migration to include
539 proper index. This caused slow restores of migrated jobs.
540 kes Temp fix to plugin name file_index.
541 kes Bacula backed up and restored a MySQL database.
543 kes Implement plugin restore.
544 kes Implement parsing of db_driver to give db_type index.
546 kes First cut of plugin restore code.
547 kes Fix bug #1047, which had a heap overrun when stripping certain paths,
548 and do not strip paths on symbolic links.
549 kes Set catalog backup database and user name from values specified on
550 the ./configure line.
551 ebl Fix #1031 about wrong pool source information in job report.
554 kes Remove a redundant jcr argument to find_files, match_files, and
556 kes Implement '.status dir header|scheduled|running|terminated' that
557 prints the requested status section. With the exception of the
558 header, the other reports have fields separated by tabs (\t).
560 kes Apply patch from Peter Much <pmc@citylink.dinoex.sub.org> that fixes
561 a resource embedded run command to find a since time if no explicit
562 since time was supplied on the command line.
563 kes Apply state-file.patch sent by Allan Black <Allan.Black@btconnect.com>
564 that updates the state file at job termination time in addition to
565 when the daemon terminates.
567 kes First version where a plugin did a backup.
568 bpipe-fd.so created a backup file, wrote a test
569 string to it, and Bacua could restore this fabricated file.
571 kes Implement DB Driver = string for the DBI driver.
572 kes Remove all old bdb_xxx.c code. Add dummy routines to bdb.c
573 kes First cut of code for loading Win32 plugin dlls. Implement
574 dlopen, dlsym, dlclose, and dlerror in src/win32/compat/compat.cpp
575 and implement a dlfcn.h file based on opengroup's definitions of
578 kes First cut plugin directives.
580 kes Apply patch from bug #1049 to prevent stripping the path on a
582 kes Attempt to fix bug #1047 where stripping a path corrupts the
583 heap. Waiting for feedback.
584 kes Correct the Mount message not to suggest labeling a new tape
585 when doing a restore. Submitted by email by John Stoffel.
586 kes Attempt to work around gcc FORTIFY_SOURCE bug that crashes the
587 FD by using casting. Reported in bug #1042.
589 kes A bit of crypto cleanup. More later.
591 Release Version 2.2.8
593 kes Apply patch from Martin to correct bug #1040, bscan sets existing
595 kes Fixed important spelling error in doc -- bug #1045.
597 ebl Fix bextract to be able to extract non-portable Win32 data to
599 kes Move initialization of read/write res lock earlier in the code.
600 This fixes the crash with a null conf file. This fixes bug
602 kes Redefine CURES in lib/parse_conf to be URES and move it all
603 into lib/parse_conf.c -- this responds to bug #1042, but does
604 not fix it. The fix is not to compile with FORTIFY_SOURCE.
605 kes Backport to 2.2.8 fix de-referencing a NULL pointer in the scanner from
606 the trunk SVN. I don't think this was reported as a bug.
608 ebl Fix a bug during tape initialization with MTSETDRVBUFFER.
610 kes Fix Win32 build with new .def files and DLL_IMP_EXP ...
612 kes Add DataDespooling and DataCommitting status (committing is
613 the last despooling).
614 kes Finish implementation of new reservations code noted below.
616 kes Fix bsnprintf for float point numbers. I broke recently when
617 parameterizing some variables. This fixes bug #1036.
618 kes Undo recent reservations changes ... will apply them later
619 when they work better.
621 ebl Fixes #1034 which cause mysql to hang the connection after 8h
622 ebl Change default statistics target of filename.name and path.path
623 fields for PostgreSQL. This speeds lookup by indexes. Thanks
625 kes A few more tweaks to new reservation code. Make sure to clear
626 vol released flag when retaking volume. When reading label and
627 label is bad mark volume unused. When recycling, mark volume
628 unused so it can be renamed.
630 kes Fix reserve_volume() so it doesn't release a volume in use
631 (i.e. a volume entry not marked released). This should be
632 the last part needed to fix bug #1018.
634 kes Move Heartbeat documentation from Job to Director resource.
635 This fixes bug #1033.
637 kes Fix existing switch drive SD code to call autochanger to release
638 any old volume. This must be done to keep the autochanger from
639 releasing subsequently newly reserved volumes in doing a close().
640 This should fix bug #1018.
641 kes Fail if attempting to get console input in batch mode. This
642 should help fail RunScript console commands that are incomplete.
643 kes First cut implementing switch_drive() in SD (not actually called).
645 kes Implement first cut running console commands in a RunScript.
647 ebl Fixes bug #1028 where 'Selection Type' option was not usable
649 ebl Fixes bug #897 and bug #1005 where bacula doesn't display runscript
652 Release Version 2.2.7
654 kes Add new free_tls() entry point so that Win32 builds.
655 kes Fix compile warning in src/lib/util.c
656 kes Fix entry point for edit_job_codes() so that Win32 builds.
657 kes Fix seg fault Frank Sweetser reports in regression testing
658 on his systems. The problem was that the original author of
659 bsnprintf.c did not take into account the side effects of
660 using ++x in the argument to a #define.
661 kes Make SD protocol backward compatible with version 2.2.x.
663 ebl Fixes bug #1015 where bacula failed to restore acl to a socket
664 because Bacula no longer restores sockets.
665 ebl Always use ignorecase fileset option on win32 FD.
667 kes Apply patch from Michael Stapelberg <michael@stapelberg.de>
668 that implements double quoting include names in conf files,
669 and also allows piping input by having the first character
670 be a vertical bar (|).
671 kes Apply patch from Bastian Friedrich <bastian.friedrich@collax.com>
672 that implement %f in RunScripts to pass the FileSet name.
673 kes Skip leading | when lex input comes from a pipe as suggested
674 by Michael Stapelberg <michael@stapelberg.de>.
676 kes Apply patch for bsmtp Win32 daylight savings time fix supplied by
677 Nerijus Baliunas <nerijus@users.sourceforge.net>
679 kes Implement Plugin Directory and plugin events.
681 kes Implement a security enhancement: TLS authentication but no
682 encryption. Enabled by setting 'TLS Authentication = yes'.
683 Note when this is on, TLS encryption is turned OFF!
685 kes This patch corrects a problem where the maximum concurrent storage
686 jobs counter gets out of sync during restore jobs causing jobs to
687 'wait on max Storage jobs'. This patch fixes bug #1009.
689 kes This patch fixes bcopy so that it produces correct Volumes.
691 kes This patch eliminates spurious output to the console during a VerifyVolume
692 job that contains encrypted data. It fixes bug #1024.
694 kes This patch prevents the 'status dir' command from trying to use a scratch
695 volume and possibly moving it from one pool to another. This patch fixes
698 kes Add new include to postgresql.c suggested by Marc Cousins so
699 that it compiles correctly with pgre version 8.3.
701 kes Fix --archivedir addition to configure. Replace it with
702 --with-archivedir in configure.in This fixes the regression
704 kes This patch fixes bug #1012 where the job is canceled because
705 of Max Run Time exceeded when the job has not yet started.
707 ebl Apply Richard Mortimer patch that fixes #1016 when there are more than
708 one 'part' to write. Instead of each part being stored on disk,
709 written to DVD, then deleted from disk, all parts are written to disk,
710 and only the last is written and deleted from disk.
711 kes This patch fixes the status command to include the formating string for
712 JS_AttrInsterting. It fixes bug #1021.
713 kes This patch should fix the Mac OS X build problem on the latest
714 Darwin, where sys/types.h was not included correctly (apparently
715 due to a change in the Mac headers). The solution was to explicitly
716 ensure that it is defined for the ./configure.
717 This patch also has a rebuild of configure that includes the Debian
718 qt4 patch to check for qmake-qt4. This patch fixes bug #1020.
719 kes This patch should ensure that queued messages to the console are
720 displayed as soon as possible. It should fix bug 1007, but has been
721 reported not to work.
723 kes This patch fixes the infinite loop when trying to increase the
724 maximum number of volumes in a Pool during the add command.
725 This patch fixes bug #1008.
727 Release Version 2.2.6
729 db Remove extra data on estimate command in joblist for bat.
731 kes Cleanup of code in SD that sets the LastWritten date. This doesn't
732 really change anything, but is the beginning of doing it *right*.
733 To do it completely right the LastWritten date must be passed to
734 the SD, but it is not yet done.
735 kes Minor tweaks to some bat restore SQL.
736 kes This patch fixes bug #1003 where putting the message output from
737 a Verify job into the catalog results in a recursive loop. The problem
738 seems to show up only with postgresql (to be verified).
739 kes Correct %x to %p in postgresql debug statement.
741 kes Fix bug #942 where lots of emails where generated when the heartbeat
742 interval was low and Bacula wanted a different tape from the one in
745 ebl Add new SD despooling attributes and Dir inserting attributes
746 job status codes in the catalog (Status table).
748 ebl Use qmake-qt4 instead of qmake when available (debian system).
750 kes Add a security warning to src/cats/make_catalog_backup.in indicating
751 that passing the password via the command line (arg 3) is insecure.
752 This responds to bug #990 (it doesn't fix it).
754 kes Set default debug_level to zero. This corrects bugs #991 and #993.
755 kes Fix a crash in bat when it cannot connect to the Director for example
756 if the Director is not running.
757 kes Remove redundant INDEX (JobId) from File table in the trunk.
759 kes Make explicit exception to GPL in LICENSE to permit linking
760 the Win32 FD with Microsoft VSS code.
761 kes Apply the Solaris package patch from
762 Masopust, Christian <christian.masopust@siemens.com>
763 kes Apply the patch to optionally add a timestamp in the debug output
764 submitted by Mariusz Czulada <manieq@wp.eu>.
766 ebl Use PQerrorMessage instead of PQresultErrorMessage in postgresql
767 backend (sql_strerror). Fixes bug #989
769 kes Apply Michael Short's <mdshort@gmail.com> Win32 regress patch.
770 It applied with no problems.
771 kes Add PATH command to SunOS part of mtx-changer.in so that sed and
773 kes Redirect stderror to stdin on mt status command in mtx-changer.in
774 since the status is returned on stderr on Solaris.
775 kes Activate Close button on tray-monitor window. This fixes
777 kes Check for NULL item in parse_conf.c before calling it. In the
778 case of Device, there is no item and this caused a seg fault when
779 Device appears in the conf file.
780 kes Add a #define __CONFIG_H when including config.h in bacula.h. This
781 avoids pulling in config.h multiple times in some new code.
783 kes Fix spurious warning message printed when creating a volume with
784 a LabelFormat. This fixes bug #976.
786 Release Version 2.2.5
788 kes Add JobId in place of Job name in all the Jmsg() output.
789 kes Correct the APP_DESC for the Win32 storage service (remove an e).
791 kes Make maxvol-test and new more strict maxvol2-test work.
792 kes Print JobId in all Jmsg() job output.
794 kes Add new SD despooling attributes and Dir inserting attributes
795 job status codes. This fixes bug 961.
796 kes Fix Win32 drive display in bat version browser. Fixes bug #962.
798 kes Fix doc issue. This fixes bug #963.
799 kes Fix listing performance problems in bat. Pointed out by
801 kes Remove old debug code.
802 kes Fix bat code that tests for Win32. This should fix bug #968
803 kes Query 5 list wrong Vol after migration. This fixes bug #960
805 ebl Fix #969 where user can't change Replace option in restore menu.
807 kes Save jcr in thread specific data (tsd) for each thread.
808 kes Make Dmsg() print JobId as -%u.
809 kes Make Jmsg, Emsg, and others automatically pickup the jobid
810 for the thread if it exists.
811 kes Remove old reservation debug jid code.
812 kes Remove get_jcr_from_tid() from OpenSSL and tls code.
813 ebl Add an option that permit to specify spool size in job
814 definition. (Applying patches/testing/spoolsize_per_job.patch).
815 You must upgrade SD and DIR at the same time.
816 dvl Add new configuration item --archivedir
817 dvl Adjust regression tests to use tmp not /tmp. This will allow
818 multiple concurrent runs of the regression tests.
820 kes Fix race condition that drops final block written to volume.
821 This happens in rare cases with multiple simultaneous jobs
822 when the Volume fills. This fixes bug #964. May be related
823 to bug #935 and possibly #903.
824 kes Eliminate more strerror() and replace with bstrerror().
825 kes Remove BSD getopt and replace with unrestricted IBM version.
826 kes Fix Win32 build for changed calling sequences.
827 kes More tweaks to the mount volume routines to get everything
828 right. Changed variable name from find to have_vol, which is
829 much easier to understand.
830 kes Enhance btimer debug code.
832 kes Fix FD->SD authorization failure, which was due to spurious
833 wakeups from a pthread_cond_timedwait(). Simply check the
834 predicate before continuing. This fixes bug #953.
835 kes Add const char where needed (more to do). Remove temp debug code.
837 kes Setup SQLite busy handler before doing queries. Fixes bug #967.
838 kes Don't overwrite error message in check_tables_version.
840 kes Unlock batch insert tables with same calls used elsewhere.
841 kes Allow starting 59 jobs a second.
842 kes Make SD session key more random.
843 kes Add retry for SQLite opening db if it fails. Probably helps
845 kes Suppress extra error messages during batch insert failure.
847 kes Add jcr to timer packets so if killed message can be sent to job.
848 kes Add JobId to all Dmsg() output.
849 kes Put some FD auth code on dbglvl rather than fixed.
850 kes Return insert attributes error message in db msg buffer to avoid
851 false error messages. Helps fix bug #966.
852 kes Separate batch init error messages. Probably helps fix bug #966.
853 kes Make SD code that contructs attribute insert check string lengths
855 kes If Dir gets an error during inserting attributes, cancel SD.
856 This reduces unnecessary error messages.
858 kes Correct search boolean for getting Volume info
859 ebl Cleanup batch insert code. Probably fixes bug #965.
860 kes Back out one small change to the reservation system (reserving a volume).
861 kes Rework how a Volume is mounted. It is now much more intelligent and
862 will always attempt to use any mounted volume if possible and reduces
863 calls to the Director asking about volumes.
865 kes Turn off some code when batch insert not enabled.
866 kes Edit FD name in connect error messages.
867 kes Rework the reservation system to take into account that the Director
868 might give us a Volume that is different from the current one being
869 used, and to ensure that we don't exceed Maximum Volume Jobs.
870 This fixes (mostly) bug #947 ' Maximum Volume Jobs = 1 produces
871 fatal error with multiple jobs running'
872 kes Add more debug code in reservation system.
873 kes Implement maxvol-test to check bug #947.
875 kes Add code to handle tray monitor separated from Win32 FD.
876 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
878 kes Add missed return in fixing verify bug -- trunk only.
879 ebl Fix a command parser issue causing a director segfault.
880 kes Fix ANSI tape labeling. Fix restoring ANSI labeled Volumes.
882 kes Increase the max block size to 4MB fixes bug #957.
883 kes ERABT if user sets min block size > max block size. Fixes bug #956.
884 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
885 is not properly mounted (recognized) during a poll.
886 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
887 Job that has differences reports Verify OK.
888 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
890 ebl Add an option to operate on all pools with update vol parameters.
891 This complete the project 20. Patch from Nigel Stepp.
892 ebl Add history support to bconsole when using readline.
893 Using Ctrl-D to exit doesn't update .bconsole_history
894 kes Modify new volume algorithm to use max MediaId for generating next
895 volume number rather than the count of Volumes. This should essentially
896 eliminate the failure rate if some volumes were deleted. Bug #921.
897 kes Begin implemention of Optimize Job Scheduling.
898 kes Implement restore callback that Dirk and I agreed on for bat
899 restore. This fixes bug #928. Restore of backup of zero files fails.
900 kes Fix SQL Catalog logging which broke with new db_escape_string
903 Release Version 2.2.4
905 kes Fix bacula_cats.def for new db_escape_string().
906 kes Increase size of name string when FD making connection to SD.
907 May fix bug #953. FD->SD connection failure.
909 kes Add code to help Dan debug 2drive-incremental-2disk test.
910 kes Add code to try to fix bug #908.
911 kes Add waits to multiple exit detection code to try to force pid
912 file to always be deleted.
913 kes Restore good dev.tar.gz to rescue set appropriate binary property.
915 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
916 trying to switch drives by checking for blocking before unblocking.
918 kes Cancel storage daemon in all cases where FD reports error. This
919 should fix virtually all cases of bug #920.
920 kes Fix db_escape_string() for MySQL which did not compile.
922 kes Fix error message that was clobbered when Dir tells SD it does not
923 have write permission on Volume. This should fix a minor point
924 in bug #942, but not the main problem.
925 kes Add code to cancel job in SD if FD connection fails. This should
927 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
928 dvl Pass jcr and db into db_escape_string() to enable better escaping
930 kes Fix migration code to get correct Volume name with multiple volumes
931 by skipping |. Fixes bug #936.
932 kes Implement patch supplied by Landon to fix bug #944 where using
933 TLS with bconsole uses 99+% of the CPU.
934 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
936 kes Move patches into patches directory.
938 ebl Fix bug #946 about 'bacula-dir -t' which doesn't works
941 ebl Using 'm' in bconsole will show messages like before,
942 and not memory usage.
943 kes Fix bug #935, and probably also bug #903 where files were not
944 restored. MediaId was not properly set in JobMedia record after
947 kes Suppress chown and chmod error messages if the FD is not running
950 kes Apply Martin Simmons' patch that should turn off the new API usage
951 when batch insert is turned off allowing building on older
953 kes Add ./configure search in qwt-qt4 for qwt package
955 kes Bacula is now free of 3rd party GPL copyrighted code!
957 kes Add guid_to_name.c/h which replace idcache.
958 kes Remove enh_fnmatch.c. Make code that references it use fnmatch.c
960 ebl Detect if new PosgreSQL batch insert API is present.
961 kes Correct incorrect mempool call causing Director crash. Occurs on
962 systems without va_copy().
963 sb Update spec files for 2.2.1 release
965 kes Fix memory pool call in ua_output.c. bug #934.
966 kes Replace fnmatch.c and fnmatch.h by modified BSD versions.
967 Add test program to fnmatch.c
969 kes Integrate patch to README.vc8 from
970 Hederer Jean-Sébastien <hedererjs@asperience.fr, had to manually
971 edit it to get it into Unix patch format.
972 kes Implement mkpath.c to replace old FSF makepath.c
974 kes Implement savecwd.h and savecwd.c. Remove FSF versions.
976 Release Version 2.2.1
978 kes Update POTFILES.in
979 kes Cleanup a few underquoted AC_DEFUNs in configure
980 kes Apply patch from Martin Simmons that adds a test for va_copy to
983 kes Fix bug #921 by increasing the number of tries to create a new volume
985 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
986 can be called multiple times. Implement a version for machines
987 without va_copy() that gets a big buffer.
989 kes Integrate more portable zone offset code into bsmtp.c
990 Submitted by Attila Fülöp.
992 kes Fix bad SD->FD return status reported by
993 (James Harper) <james.harper@bendigoit.com.au>
994 ebl Fix a bug in read_close_session which return random status
995 thanks to James Harper
997 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
998 and directory names during restore of single file/directories.
999 kes Add sanity checks to .sql command when string is empty. Hopefully
1000 that will resolve Dirks Director crash.
1002 kes Apply patch submitted by Martin Simmons that corrects a seg fault
1003 in the bsmtp chat subroutine when debug is >= 10.
1005 kes Fix Director crash when running bat SQL queries.
1006 kes Add David's notes on Item 8: Copy pools.
1008 kes Rework projects file to be current and ready for a vote.
1009 kes Enhance lex scanner error message.
1011 kes Tweak LICENSE file to mention BSD code.
1012 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
1013 if specified on the ./configure.
1014 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
1015 This class is intended to allow us to open a second bsock to the
1016 Director while in the restore subdialog.
1018 kes Fix configure to create bat Makefile before creating dependencies.
1019 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
1020 kes Add a tooltip to the tray monitor.
1021 dvl Set the Director's PID file before dropping privs. This fixes
1024 kes Update AUTHORs file
1025 kes Increase the default max concurrent jobs to 20 in FD and SD to
1026 correspond with the default .conf files.
1027 kes Rewrite the Win32 service routines. This eliminates the 3 copies
1028 some different, of the same file created by RN when porting the
1030 kes Rearrange some of the Win32 directories and the placement of the files
1032 kes Set DEVELOPER flag in version.h
1034 ========================================================================
1035 Release Version 2.2.0
1037 kes Apply a second doc patch from Marc.
1038 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
1039 improves the tips section that discusses how to setup multiple
1042 kes Update bat README file.
1043 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
1044 corrects a typo in the Recycle status check in db_find_next_volume().
1045 This will probably fix a number of annoying problems with multiple
1047 kes Modify most of dird/msgchan.c to use bsock class calls rather than
1048 bnet calls -- no functionality change.
1050 kes Modify the Verify output to specify if files are missing on
1051 the Volume(s) or disk. Fixes confusion in bug #916.
1052 kes When more than one Volume is read in a migration job, the last
1053 Volume bytes reported are from the last read volume rather than
1054 the last written volume. Fixed. This fixes bug #910.
1055 kes Fix display of Recycle flag after update volume=foo recycle=yes.
1056 It previously printed New Recyle flag is: no. This fixes bug
1059 kes Correct seg fault when switching tape drives during restore.
1060 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
1061 be used until after 2.2.0 release.
1063 kes Remove fnmatch() in SD that permitted wild card specifications.
1064 This fixes bug #914.
1066 kes Fix %g in filename returned by SQL for browse tree reported by
1068 kes Fix configure so that it puts config.out in the cwd rather than
1070 kes Attempt to fix the locking problem reported by Eric in bug #906.
1071 kes Make berrno class to leave errno unchanged after constructor call.
1072 kes Make bnet_server use the heap rather than the stack to allocate
1073 its socket fd pointers to avoid a crash at termination. Problem
1074 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
1076 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
1077 and putting it in depkgs-qt along with Qt4.3.
1079 kes Rework code in acquire.c that switches drives for reading when
1080 the Media Type does not match. This should fix bug #906
1082 ebl Fix a director segfault during job setup #907
1083 kes Correct seg fault in postgresql when first operation returns no
1084 rows. Fixes Dirks File browser problem seg fault with bat.
1086 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
1087 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
1090 kes Implement PopUp YES/NO dialog for bat.
1092 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
1094 kes Correct RunScript to terminate job in FD on failure.
1095 kes Change abort_on_error and AbortJobOnError to fail_on_error
1096 and FailJobOnError in RunScripts.
1097 kes Minor tweaks of code formating in RunScripts, principally to
1098 avoid depassing 80 columns.
1100 kes Eliminate one #ifdef Win32 in bsmtp
1101 kes Implement grow tool to grow a file for testing very large databases.
1102 kes Add big-vol-test to test Bacula seeking with > 5GB.
1105 kes Modify find_next_volume() to return all values in Media record.
1106 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
1110 kes Update Release notes
1112 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
1113 Warning, in previous beta version, all media get from scratch keep their
1116 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
1117 This should fix bug #842. Made a note to look at removing the temp
1118 files at the end of the install.
1119 kes Add ability to mount and unmount a file device providing it is
1120 marked as being removable and has the appropriate mount and unmount
1121 commands defined in the Device resource. This fixes bug #830.
1122 kes When applying a storage override, release all previous storage
1123 definitions rather than just prepending the new storage.
1124 This should prevent a good deal of confusion.
1126 kes Implement ./configure search for qwt libraries.
1128 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
1129 Win32 FD. This should fix bug #893.
1130 kes Remove an unnecessary beep in Win32 init code.
1131 kes Update copyright dates in Win32 executable about boxes.
1132 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
1133 code with a BSD getopt.c and getopt.h.
1134 kes Remove sched.h from the Win32 compat directory -- not used.
1135 kes Remove the Exit menu item from the Win32 tray monitor. If you really
1136 need to shut it down, do it through the services panel or the command
1138 kes Remove some inappropriate Bacula FSFE copyrights.
1139 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
1140 kes Fix regress config non-portable test as pointed out by
1141 Florian Heigl <florian.heigl@gmail.com>
1142 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
1143 as pointed out by Florian Heigl <florian.heigl@gmail.com>
1145 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
1146 Reported by Frank Sweetser.
1150 kes Fix client-only build.
1151 kes Integrate client-only fixes for bsys (initgroups) and conio from
1152 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
1153 kes Make arguments to get_scratch_volume() in same order as other
1155 kes Rework the prune_volumes() subroutine so that after purging and
1156 no volume found in desired pool, it will check for a scratch
1157 volume. This prevents recycling the whole scratch pool.
1158 kes Add code to status storage to print boffset_t (largefile support).
1160 kes Move qwt (Graphics libarary for Qt4) to depkgs.
1161 kes You now need a --with-qwt=<dir> to be able to build bat.
1162 kes Update src/win32/cats/bacula_cats.def to include the new
1163 db_get_query_dbids() call on Win32.
1165 kes Correct a problem when selecting a scratch volume and moving
1166 it to another pool that lost some columns.
1167 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
1168 kes Enhance Autochanger error messages to include Volume and device name.
1169 kes Rework prune_volumes() code to take account of InChanger flag,
1170 and to handle recycling volumes going to the Scratch pool and
1171 current pool because the RecyclePool directive.
1172 kes Implement a better and more efficient db_get_query_dbids() to
1173 handle creating and passing back a list of DBIds.
1177 kes Start work on new more efficient DBId subroutine. First use
1178 will be for recycling volume to Scratch inchanger.
1179 kes Increase number of JobIds in pruning from 1000 to 10000.
1180 This to be replaced by above routine.
1181 kes Begin implementation of building Qt4 on Win32.
1182 kes Correct typo in fix I added for bad TLS shutdown.
1183 kes Pull 2.0.3 patches into patches directory.
1184 kes Update Release notes. Include qt-console in line count.
1185 kes Update Projects file.
1187 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
1188 bug in migration code where a job that spanned two volumes
1191 kes Implement new BST_DESPOOLING blocked state. Change from locking
1192 during despooling in SD to blocking. This means that other threads
1193 can work with the device structure, in particular the reservations
1194 system while despooling.
1196 kes Fix return in reservation message queue that missed clearing
1197 the jcr lock (implemented 26Jun07 below).
1198 kes Rename a number of dev methods to make locking function names
1200 kes Document locking in lock.c. Move lock structures to new file
1203 kes Move reservations message lock to lock jcr only this
1205 kes Move main SD locking code into lock.c (new file).
1206 kes Update Win32 build to include lock.c
1210 kes Dirk committed the qwt library code for drawing graphs in bat.
1211 kes Tweak install of qwt so that it is integrated with ./configure.
1213 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
1214 out by Eric (my typo).
1215 ebl Fix configure.in to get batch mode enable
1216 kes Return correct string from authenticate.cpp in bat when connecting
1218 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
1219 spurious line drops when using TLS.
1220 kes Do not file reparse points when restoring a file that already
1223 kes Implement Windows reparse points -- similar to directories, but
1224 we do not descend into it. This is a first cut. They seem to
1225 be backed up, but restore is not yet tested.
1226 kes Remove restore_blocking in tls code when shutting a socket to leave
1227 it in blocking mode. Hopefully this will fix the encryption bug
1228 reported by Frank Sweetser.
1229 kes When opening a file for backup, tell the OS that we are going to
1230 read it sequentially -- optimization.
1231 kes Change variable names in authenticate_director() to not conflict
1232 with member names in bat. Caused great confusion with compiler,
1235 kes Queue openssl error messages in case of comm problem.
1236 kes Do shutdown() call if socket terminated.
1237 kes Remove some duplicated code in tls.c
1238 kes Move more of the bsock member variables into private and access
1240 kes Add Frank Sweetser's tls-test to the regression suite.
1242 kes Add Swedish sv.po file
1244 kes Don't print clock skew message in FD if less than 3 seconds diff.
1245 kes Add a bit of VSS info to status client.
1246 kes Implement a first cut of Vista VSS, using Win2003 code.
1248 Release: 2.1.20 beta
1250 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
1251 loaded tape but uses first drive).
1252 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
1253 This was indeed a Win32 issue.
1255 kes Simplify search of autochanger for in-use Volume.
1256 kes Fix exit condition of check for in-use volume. kes Remove
1257 inappropriate my_postgresql_free_result() in db_close()
1259 kes Fix bad return in FD when encryption signature not found.
1260 Probably caused a crash.
1261 kes Inhibit missing encryption signature error messages for
1262 file types where no signature computed.
1263 kes Correct inverted check on autochanger in reservation system.
1264 kes Tweak debug code in autochanger reservation.
1266 kes Add some additional locking in the cats directory in subroutines
1267 that modify packet variables called from batch insert.
1268 kes Rework how dcrs are allocated. new_dcr() can now be called
1269 with an existing pointer, and it will simply clean it up.
1270 This allows the reservation system to test various different
1271 devices, and will permit easy device changes.
1272 kes A bunch of changes all over to handle new new_dcr() calling
1274 kes Work more on the Volume management in the SD. Remember Volumes
1275 for tape drives and for autochangers (even virtual disk changers).
1276 kes When looking at the Volume list to reserve a drive, handle
1277 autochanger names correctly by interating through the changer
1278 devices. Also call the Director to see if a Volume is suitable
1279 for the current job.
1280 kes Fix some bugs in bscan. Make sure all media records are written.
1281 Make sure that valid JobMedia records are written for disk files.
1282 Previously they were completely wrong.
1283 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
1284 that the URLs don't change and so that the developers will all
1285 work off the same copy. Rebuild from scrach.
1286 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
1288 Release: 2.1.18 beta
1290 kes Fix seg fault in FD from incorrect digest size.
1291 kes Fix argument to non-OpenSSL crypto.c subroutine.
1293 Release: 2.1.16 beta
1295 kes Remove a few malloc()s from the encryption code.
1296 kes Use the class calls to bsock in filed/backup.c and restore.c in
1297 place of the old bnet_xxx code.
1298 kes Implement code that does an on the fly calculation of the
1299 signing digest during restore of encrypted files. It makes
1300 a best guess at the algorithm, and if it is not correct, will
1301 then revert to the old code which reads the file after it is
1303 kes Implement at least one missing crypto stream in stream_to_ascii()
1304 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
1305 #877 where a reload with bad syntax causes Dir to exit.
1307 Cut: 2.1.14 beta (not released)
1309 kes Do not free a volume on a tape drive until another volume is
1310 mounted and read, or the autochanger unloads the volume.
1311 This should help the SD re-use volumes that are already mounted,
1312 and should fix bug #886.
1313 kes Apply patch from user brettedgar that allows gnome2-console include
1314 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
1315 kes Apply patch from Lucien Weller that fixes day of week calculation
1316 because of DST flag problem. Fixes bug #887.
1318 kes Move find_next_appendable_volume() to after acquiring a valid device
1319 in reserve.c. This fixes bug #864 -- confirmed by reporter.
1321 kes Unable to reproduce bug 872. However added additional testing for
1323 kes Bug #874 resolved by documenting SQLite limitations.
1324 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
1325 kes Bug #881 resolved by removing typo in mtx-changer script.
1326 kes Made Frank Sweetser's wiki the official Bacula wiki with his
1327 approval. Added a link to the wiki on the web page, and implemented
1328 a backup from http://paramount.ind.wpi.edu
1330 kes Fix update allfrompool to pass pool name.
1332 kes Convert to pure GPL v2 license.
1333 kes Fix sscanf problems reported by Peter Buschman that caused
1334 a bus error on Solaris.
1335 kes Rework (simplify) the select prompt in bat.
1336 kes Move get_jobid_from_tid() into lib and create a
1338 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
1339 should definitely fix the problem of lost error messages in the
1341 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
1342 kes Eliminate tcpd.h from the project. Enclose the #include from the
1343 library with extern C ...
1344 kes Add print of signal name when a signal is trapped.
1346 Release: 2.1.12 beta
1348 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
1350 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
1351 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
1352 makes SQLit3 run 30 times faster, though a bit less safe.
1353 kes Implement --with-batch-insert in configure and detection of thread
1354 safe libraries. It is on by default, but turned off if no thread
1355 safe library (e.g. SQLite 2) is available.
1357 kes Fix Bacula PostgreSQL buffer overruns.
1358 kes Do better checking for NULL results returned from PostgreSQL;
1359 implement retry for failed queries; clear results buffer after
1360 failed query. Hopefully this will correct the PostgreSQL failures.
1362 kes Implement algorithm to handle only one appendable volume with
1363 Prefer Mounted Volumes = no.
1364 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
1365 returned from a query.
1366 kes Make volume lock recursive.
1367 kes Implement an additional volume reservation algorithm that
1368 starts by considering all reserved volumes then uses the
1369 old brute force algorithm of searching the resources to
1370 find a suitable device.
1371 kes Add new reservations debug code and refine the old code.
1372 kes Update the win32/dll/bacula.defs file.
1374 kes Tweak reservations algorithm to permit a few more cases, i.e.
1375 volume reserved, but on different drive, ...
1376 kes Enhance SD status to include Pool and Media Type for drive in a
1377 more readable format (a bit longer).
1378 kes Fix PostgreSQL double free.
1380 kes Minor refactoring of restore decryption code.
1381 kes Add code to smartall.c to detect double free of a buffer.
1383 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
1384 so that bsmtp will create a correct email address (mailbox only).
1385 kes Modify 'memory' command so that the buffers are listed as 'In use'
1386 to avoid confusion with Orphaned buffers.
1387 kes I reworked the OpenSSL include/lib flags to be handled in
1388 the standard Bacula way, which should fix bug #863 concerning
1389 non-standard OpenSSL libraries.
1391 kes Implement Help Browser window for bat.
1392 kes Fix reload bug that reset StorageId to zero.
1394 kes Fix TLS #ifdefing when TLS turned off.
1395 kes Ensure that when labelling a tape with Slot=0 that InChanger
1397 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
1399 kes Add StartTime to final uar_sel_jobid_temp query so that we can
1400 add DISTINCT (required by PostgreSQL).
1401 kes Implement BSOCK authenticate_director() method. Eventually will
1402 authenicate all daemons.
1403 kes Move several more functions into the BSOCK class.
1405 kes Add code to tell the OS that we no longer need a cached
1406 file that we were reading. In findlib/bfile.c. Also,
1407 only cache files that we are reading. Thanks to
1408 Tobias Oetiker <tobi@oetiker.ch> for the idea.
1409 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
1410 kes Implement script to automatically generate cats and dll .def
1411 files for Win32 dll.
1412 kes Update README.mingw32 to include new .def file generation.
1413 kes Correct typo in UTF-8 error message as reported by:
1414 jhernandez <julianhernandez@gmail.com>
1415 kes Add additional sm_check() code on debug level 1.
1416 kes Set default debug level to 1.
1417 kes Trap SIGABRT in attempt to get traceback.
1419 kes Reduce bat connect timeout from 30 to 15 seconds.
1420 kes More restructuring and implementing BSOCK class in place of
1422 kes Remove a few unnecessary malloc() tests in crypto code.
1423 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
1424 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
1425 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
1427 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
1429 kes Fix Verify InitCatalog. The attributes were not pointing to the
1430 correct saved location.
1431 kes Implement message callback so that GUI is sure to get all
1432 daemon messages. Currently displayed in a dialog in bat.
1433 kes Ignore SIGUSR2 (Bacula timer) in bat.
1434 kes Apply regress patch from bug #859 to allow regress to work
1435 with Solaris compiler.
1437 kes Begin adding TLS support to bat.
1438 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
1439 clean up lex.c and make it more readable.
1441 kes Move more bnet functions into the BSOCK class.
1442 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
1443 kes Complete change of berrno strerror() method to bstrerror()
1445 Release: 2.1.10 beta
1447 kes Cleanup incorrect email addresses in bsmtp.
1448 kes Make bat display initial messages rather than discard them.
1450 kes First cut of adding .mod to the run command.
1451 kes Implement auto display of messages in bat.
1452 kes Enhanced preferences to allow all Bacula output to be
1455 kes Try to make bsmtp date routines more generic.
1456 kes Fixed bug #856 autochanger documentation.
1457 kes Rework bsmtp date editing for Win32. This fixes bug #854.
1458 kes Add new cats entry point so Win32 builds.
1460 kes Attempt to fix bsmtp date editing on OSes without %z editing.
1462 kes Do better checking for the MySQL 64 bit libraries looking for both
1463 .a and .so libraries.
1464 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
1465 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
1466 kes Require the thread safe version of MySQL during configure. Thanks
1467 to Andre Noll for pointing this out.
1468 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
1469 continuing in migration code.
1470 kes Apply implementation of tray-monitor font derived from gnome-console
1471 submitted by Andreas Piesk <a.piesk@gmx.net>
1473 kes Eliminate important memory loss in SQLite
1474 kes Fixed the batch insert MySQL thread specific data that was not
1475 being freed. See cats/mysql.c:db_thread_cleanup().
1476 kes Fix restore before command.
1477 kes Convert old hdr.name to name() in a few places.
1478 kes Implement update jobid command.
1479 kes Return all time_t dates in db_get_job_record()
1480 kes Stop watchdog in SD earlier.
1481 kes Put Pool just after Storage in please mount message.
1482 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
1485 kes Update the po files.
1486 kes Fix Verify InitCatalog by making it cache attributes.
1488 kes Change name bacula-bat to bat for man 1 page to correspond to
1490 kes Check for client and store NULL pointers in status command. This
1492 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
1493 kes Fix sign extended editing of %p.
1494 kes Clean out a little old #ifdefing in cats/mysql.c
1496 kes If time diff between DIR and FD is more than 600 seconds convert
1497 INFO message to WARNING.
1498 kes Implement heap size display in status for all daemons.
1499 kes Attempt to fix MySQL db open memory loss (not successfull).
1500 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
1501 kes Eliminate memory loss in MySQL (possibly other SQLs) during
1502 Query. This looks like a MySQL but but by doing extra releases,
1503 the memory goes away. This should fix bug #847.
1505 kes When backup fails, cancel SD before waiting for sd termination.
1506 kes If SD is waiting for FD to connect during cancel, wake up the
1508 kes Fix fsf code so that errno is correctly reported.
1509 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
1511 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
1512 so that Bacula doesn't later stumble into a seg fault.
1513 kes Use the term Restore Client in the restore Job report.
1514 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
1515 the original job's FileSetId.
1516 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
1517 spooling in migration jobs. Not yet tested.
1518 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
1519 reading conf file from a pipe. However, do it with open_bpipe()
1520 rather than popen. Not yet tested.
1522 kes Fix an ugly bug where the VolCatBytes were getting updated
1524 kes Implement bconsole memory command that prints current memory
1525 usage, plus smartalloc dump.
1526 kes Clarify some error messages in backup, admin, and migrate.
1527 kes Shrink label dialog to smaller size.
1528 kes Invert Cancel OK buttons on restore to be OK Cancel.
1529 kes More strerror() to bstrerror() conversions.
1531 kes Start implementing bstrerror() in place of strerror().
1532 kes Stripping path -- seems to work.
1534 kes Prevent door and port files from being restored (mostly
1536 kes Free an unreleased buffer in compat code.
1537 kes Change console Job name from *Console* to -Console- to eliminate
1538 Win32 filename problems. Put Win32 path separator when creating
1539 Console file. This fixes bug #846.
1540 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
1542 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
1544 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
1545 to force Win32 error message.
1547 kes First cut strip path. The data should be passed to the FD,
1548 but nothing is done with it yet.
1549 kes Enhance the digest and signature routines in the crypto
1550 library to accept a JCR and to use it to print error messages
1551 so that they will go in the Job report rather than the daemon's
1553 kes Simplify some of the verify signature code.
1554 kes Simplify a few of the alternative returns in the signature
1557 ebl Use only POSIX regex instead of GNU regex in breg.c for
1558 File relocation. It fix broken freebsd compilation.
1559 kes Convert all other Dir files to use new ua class message
1561 kes Tentative fix for missing digest signature in bug 807.
1562 kes Correct handle problem in new win32_ftruncate routine.
1563 kes Convert ua_purge.c and ua_update.c to use new ua class
1564 message routines for bat.
1566 kes Correct incorrect installation of LICENSE in Win32 installer.
1567 kes Display LICENSE at the beginning of the Win32 install.
1568 kes Attempt to correct the need for the png files to be installed
1570 kes Reapply my bat.conf install script in qt-console. I think I
1571 editted bat.pro instead of bat.pro.in and it was lost.
1572 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
1573 the /var/lock/subsys for subsysdir. Also corrects typos in the
1576 kes First cut update job.
1577 kes Correct configure to include qmake of src/qt-console directory.
1579 kes Make restore job yes/mod/no print in one command so GUI works.
1580 kes First cut implementing backup and restore client.
1581 kes Correct editing in Verify output that caused a seg fault.
1583 kes Insure that bat.conf is not overwritten during installation.
1584 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
1585 while I was implementing migration in March 2006 !
1587 ebl Cleanup file relocation, using char *RegexWhere instead of
1588 char *where + bool where_use_regexp
1589 kes Update some manpages and add bat manpage.
1590 kes Make a first cut at converting bacula.spec.in for bwx-console
1592 kes Apply patch from John Goerzen to add hostname as fourth argument
1593 to make_catalog_backup script.
1594 kes Fix typos I introduced into bsmtp.c
1595 kes Make pm_strxxx() routines handle input of NULL pointer. This
1596 is to protect from NULL pointers returned from SQL databases.
1597 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
1598 kes Add more debug to FIFO code -- fix fifo regression test.
1600 kes Implement posix_fadvise in FD, and for reading spool files in SD.
1601 kes Add thread timer to bnet_connect() to break from OS if wait time
1604 kes Update Win32 build to include new files, new symbols, and
1606 kes Implement socket level heartbeat (tcp_keepidle)
1607 ebl Commit File relocation patch
1608 kes Make bat have 'make install' target.
1609 kes Warn during install if old gnome-console binary found.
1610 kes Warn during install if old wx-console binary found.
1611 kes Add -8 option to bsmtp command line to add content type utf-8.
1612 Fixes bug #809. (Character coding problem in bsmtp).
1613 kes If < is found in target (from, to, cc) then do not enclose the
1614 target in < > in bsmtp. Fixes bug #772 (malformed address).
1615 kes When printing certain items in dbcheck, stop after 300000.
1616 Fixes bug #822. (dbcheck loops).
1617 kes Incorrect status in Dir after waiting for mount with poll set.
1620 kes Extend idea of Prefer Mounted Volumes to mean a volume about
1622 kes Print waiting to reserve a device every 5 mins.
1624 kes Don't call close_part in label.c if tape and relabel.
1625 kes Don't free volume if busy in close() -- should help with
1627 ebl Fix #824 RunScript bug (After script could be execute twice)
1628 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
1629 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
1630 Add a regression script to test RunScript
1632 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
1635 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
1636 deprecated. No additional bugs will be fixed, and they will be dropped
1637 in a future release (probably 2.4.0).
1638 kes Change name of wx-console to bwx-console to make it more Bacula
1640 kes Change the name of gnome-console to bgnome-console to make it
1643 kes Some time in March, a Feature Request with patch from Jorj Bauer
1644 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
1646 The ability for the director to validate a Client (FD) CN against
1647 an arbitrary set of patterns rather than the hostname, with
1648 A new 'TLS Allowed CN' set of directives which are implemented
1649 in the Client resource. Then pattern matching is used in place
1650 of hostname matching against the Certificate's CN. As an example, we
1651 have certificates which (a) use a local CA, and (b) have a CN of the
1653 kes Add new/changed entry points to Win32 build
1654 kes Create unaccepted-projects for projects that are not accepted.
1655 kes Simplify locking in the reservations system.
1656 kes Add more debug code in reservations.
1657 kes Make sure error condition on reserving a volume is handled correctly.
1658 kes Correct handling of volume_in_use.
1659 kes Correct handling of initializing a device.
1660 kes Move handling of broadcasting releasing a device into release_device().
1661 kes Correct attaching dcr to dev so that it is only done if device
1662 is properly initiated.
1664 kes Locking debug level tweaks in SD.
1665 kes Tweak new Volume code.
1667 kes Add exec external-command [wait-seconds] to bconsole. This
1668 executes the external-command. Note! normally external-command
1669 should be enclosed in double quotes.
1670 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
1671 it should normally be off in a production system.
1673 kes Implement die command for SD so that we can force it to dump.
1674 kes Implement SD lock debug code.
1675 kes Implement new algorithm for keeping Volume list in SD. It
1676 is now owned by the device.
1678 kes Implement new code for freeing in use volumes that should
1679 resolve if not all, some of the problems of multiple drive
1680 tape conflicts described in bug 801.
1682 kes Fix gui/bacula-web/images files in svn.
1683 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
1685 ebl Fix a bug in batch mode (in string escape)
1686 kes Correct migration prune SQL typo that crept in in a
1687 recent 2.1.x change.
1689 kes Move bnet_despool() into class in bsock.c
1690 kes Modify job report to include director name and Build OS.
1691 kes Move drop root privilege and check_catalog() before fork.
1692 kes Add update database scripts (version 9 to 10) to updatedb directory.
1694 ebl Check size and age of each file after its backup to see if
1695 it has changed during backup, if 'checkfilechanges' is set.
1696 The FD will do an extra check (stat(2)) after
1697 each file backup. mtime, ctime and size are compared with
1698 'before backup' information. If time or size mismatch, an
1699 error message will be generated. You must upgrade FD to use it.
1701 kes Make database name and user configurable
1702 --with-db-name=xxx --with-db-user=xxx
1703 kes Add back database type to message.c for debugging.
1705 kes Implement dir_sql() which issues an SQL query.
1706 kes Modify bat medialist to use dir_sql() and do some minor C++
1707 formatting as well as eliminating a number of pointers, simplifing
1710 kes Fix some of the mtx-changer grep commands for tape label readers.
1711 kes Convert a number of bsendmsg into the appropriate send/warning/error
1712 message class calls.
1713 kes Suppress the using database message in the .sql command.
1714 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
1716 kes Add context menu for floating a window.
1717 kes Some minor cleanup and name changes in qt-console
1718 kes Add doing mt setblk 0 in Win32 mtx-changer.
1719 kes Apply Martin's bug fix to move definition of ENODATA for
1721 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
1722 sqlite2 and sqlite3.
1724 kes More pruning cleanup.
1725 kes Turn on wait_for_drive by default in mtx-changer.
1726 kes Turn on Batch insert code by default as it now passes regression.
1727 kes Add ./configure --enable-bat to enable building of Bat.
1728 No install yet though.
1730 kes Implement a new .sql command for bat.
1731 kes Implement code to turn off pruning in obtaining the next volume.
1732 Pruning is turned off for the status dir command, but turned on
1733 for SD requests and for the list nextvolume command.
1735 kes Correct Qmsg() that was not updated correctly when committing a
1736 previous change (probably the recent TLS patch).
1738 kes Write new subroutine is_volume_purged() that explicitly checks
1739 if the Volume is purged, and if so marks it as such. This should
1740 resolve problems reported about needing to mount twice to recycle
1742 kes Rewrite pruning algorithm to do more work in the SQL engine, and
1743 to pass a list of JobIds to be deleted to SQL. Also, minimize the
1744 amount of duplicated code.
1745 kes Do volume pruning only for the Media Type desired (reduces pruning time
1746 if multiple Media Types are in the same pool).
1747 kes Implement more detailed info in the Job report for the Bacula version
1749 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
1751 ebl Add bbatch tool to bench database and insert mode.
1752 Fix sql quote stuff in batch mode
1753 Fix sql stuff for mysql
1755 kes Correct problems with am/pm scheduling. Fixes bug #808.
1756 kes Implement new prunning code that prunes up to 1000 jobs at
1757 the same time. The same technique can be applied to a number
1758 of other prune/purge subroutines.
1759 kes Add an insanity check when starting a new tape job to ensure
1760 that the tape position has not been changed. If so fail the
1762 kes Fix Win32 build for dlls to add the folllowing:
1763 src/lib/bsock.c -- new file with new entry points
1764 src/lib/dlist.c -- new entry points
1765 src/cats/sql_create.c -- new entry point
1766 src/cats/sql_cmds.c -- new DATA item exported
1768 ebl batch mode cleanup bscan-test is ok now.
1769 kes Implement SD code to check length of disk volume before appending.
1771 kes Correct return status on db_batch... routines.
1772 kes Add call to db_write_batch_file_records() to migration code.
1773 ebl Fix AfterJob timing
1774 kes Move the checking of the database in initializion of the Director
1775 to after we drop privileges. This avoids the need for both root
1776 and bacula access to the DB.
1777 kes Correct a misplaced variable definition in src/filed/backup.c
1778 kes Correct how the new batch insert db_create_attributes_record()
1779 uses the arguments. Caused a seg fault in bscan.
1780 kes Implement lock() and unlock() methods in DEVICE class.
1781 Implement block() and set_block(xx) methods in DEVICE class.
1782 kes Modify bnet_connect() so that it uses time() to check for the
1783 wait time expiring (on some OSes, some system calls may not
1784 return immediately).
1785 kes Modify Verify to obtain the previous JobId when it is actually
1786 running rather than at schedule time (as it was in 1.38.x).
1787 kes Fix src/job.c to handle MaxWaitTime correctly. This should
1789 kes When checking pid in pid file, continue running if the pid is
1790 the same as ours. This occurs on IRIX after a system crash.
1793 kes Extend new GUI API.
1794 kes Make the ua structure a class, and implement send_msg(),
1795 error_msg(), warning_msg(), and info_msg().
1797 kes Apply fix from for building wx-console on the Mac from
1799 kes Implement new select mechanism for GUI programs.
1800 kes Reorganize initialization of stackedWidgets in bat.
1802 kes Add updated nagios plugin supplied by Christian Masopust.
1804 kes More bat implementation.
1805 kes File migrate bug with Pool Occupancy using mediaid instead
1806 of jobids. Fixes bug #795.
1807 kes Fix orphaned buffers in filed backup and verify due to
1808 crypto buffers not freed during errors. Fixes bug #789.
1809 kes Extend new GUI api code to tree commands.
1810 kes Ensure that tree and dot commands check console ACLs.
1811 kes Permit marking directory with trailing slash.
1812 kes Allow 20 console connections (instead of only 10).
1814 kes Add smartctl call to bacula-sd.conf as an example of getting
1817 kes Modify jobq.c to let simultaneous restore jobs run. This may
1818 cause them to fail if they cannot get a drive.
1819 kes Add Client Connect Wait to Storage daemon to permit users to
1820 modify the time the SD waits for a FD connection.
1822 kes Correct virtual changer check which was backwards. This caused
1823 volumes to be unloaded into slots already occupied.
1825 kes Apply Command ACL filter to JobId list in restore command.
1826 kes Correct typeo in var.c patch.
1828 kes Don't let Bacula prune File or Job records for the current Job.
1829 kes Fix variable substitution pad + inc bug reported (with patch)
1832 kes Correct SQLite log table index as reported by Luca Berra.
1834 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
1836 kes Begin implementing new comm signals for API.
1837 kes Fix a few places in lib/message.c where the open fd may
1839 kes Continue implementing lib/bsock.c (real class). Make jcr,
1840 who, host, and port private. There are new methods to access
1841 them for non-class use. This required touching a number of files.
1843 kes Add LANG=C to autoconf/randpass so it works with languages other
1844 than English. Fixes bug #788.
1846 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
1848 You will not be able to generate Include/Exclude list any more.
1849 It will be fixed soon.
1850 If you want to use this, you can apply
1851 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
1853 kes Restore of sockets created false error messages because Bacula
1854 no longer restores sockets, but the code was still trying to
1855 set the attributes on a non-existent file. Reported by a user.
1856 ebl finish RecyclePool feature
1857 Media will takes Pool.RecyclePool
1858 when moving from Scratch to a Pool or when user will do
1859 update volume=xxx frompool
1860 To use it, add RecyclePool = aPool to your Pool resource
1863 RecyclePool = Scratch
1867 kes Expand new BSOCK class adding signal() and new BNET signals.
1868 kes Begin enhancing the dot commands adding a new API function
1869 that returns more information and will make it easier
1870 to interface to the Director from a program.
1872 kes Make DEVICE fd private. Its new name is m_fd, and can be
1873 obtained with dev->fd() outside the class. This is the
1874 first of many DEVICE members to be made private.
1875 kes Implement Michael Renner's idea on having a virtual disk
1876 changer. I made some minor modifications (e.g. I did not
1877 implement the Virtual Changer directive, but simply set
1878 the Changer Command to an empty string.
1880 kes Implement a BSOCK send() method that writes the whole record
1881 in a single write() request rather than in two.
1882 ebl add update volume=xxx recyclepool=yyyy
1883 volume takes recyclepool from pool when using update volume=xxx from pool
1885 kes Fix encryption deblocking bug, which caused some restored files
1886 to be truncated. This fixes bug #763.
1887 kes Add FD event sequence order prepared by Eric -- for RunScripts.
1888 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
1890 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
1891 ebl Use btime_t instead of uint64_t in media patch.
1893 kes Optimize the use of the database a bit in the Status dir command.
1894 Only open it when needed, ensure that if any previous database
1895 was opened, it is closed.
1897 kes Correct VolCatBytes bug from media patch.
1898 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
1899 in the case of orphaned records.
1900 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
1901 and File records in 300K chunks to be more efficient. This
1902 idea came from Juan Luis Frances (if I remember right).
1903 kes Apply Eric's scratch patch that moves a purged Volume to
1904 the RecyclePool. Question: how is RecyclePool set? what
1905 happens to the ScratchPool?
1906 kes Apply Eric's media patch that collects read/write media
1907 times as well as byte counts. This patch requires a
1908 simultaneous upgrade of the DIR and SD. Note, there
1909 should be some way to turn off timing. I'm not sure
1910 times are in Bacula units.
1911 kes Apply Eric's batch-insert patch.
1913 kes Update projects list.
1915 kes Implement Include/Exclude file lists in FD as dlists using
1916 the new dlistString class. This permits efficiently having
1917 large include/exclude lists and completes project Item 25.
1918 kes Fix dird/ua_cmds.c so that a cancel command checks if the
1919 console is authorized to cancel the job. This fixes bug
1921 kes Modify SD so that the VolCatJobs medium record is updated
1922 at the beginning of a Job rather than the end. This
1923 fixes bug #775 where exceeding MaxVolJobs caused jobs
1925 kes Added a mutex around getting and setting Volume information
1926 so that multiple simultaneous jobs will single thread.
1928 Switch to using Subversion
1929 kes Remove src/pygtk-console/ from configure
1931 kes Delete src/lib/btree.c from win32 build, then add rblist.c
1932 plus the entrypoints.
1933 kes Apply patch supplied that corrects debug print
1934 in canceling jobs for max run time. Supplied as
1935 part of bug #621, which was previously fixed.
1937 kes Test on job_canceled() and sd_msg_thread_done inside
1938 loop starting the message thread to avoid a race condition.
1940 kes Remove rl_catch_signal from console.c as it conflicted
1941 with the header definition. Fixes bug #765.
1942 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
1944 kes Clarify some stored/acquire messages to indicate if the
1945 problem is with read or append.
1947 kes Fix memory leak with storage ids in cats/sql_get.c
1948 kes Terminate watchdog earlier to avoid reference to released
1949 memory -- reported by Jason Austin.
1950 kes Move closing the database from jobq.c to the director daemon
1951 termination routine. This fixes memory leaks for shadow jobs
1952 (i.e. migration jobs).
1953 kes Free up the unique jobid chain items in migrate.c. This fixes
1954 a memory leak problem.
1955 kes Convert some ugly looking for statements to use foreach_alist
1956 in findlib/find.c. This will facilitate converting the structures
1957 to use dlist (for large include/exclude lists).
1958 kes Fix a bug in the btree.c and btree.h routines, then rename them
1959 rblist and add them to be built in src/lib. Include some new
1960 methods written by Rudolf Cejka that make the code more readable
1961 (hides some of the ugly casting).
1962 kes Add set_next() and set_prev() methods which make the code much more
1963 readable. Also add a new dlistString class that facilitates storing
1964 strings in dlists. To be used in the large include/exclude lists.
1965 kes Make some trivial modifications to lib/tree.h that use rblist
1966 rather than dlist for storing the tree links. This was suggested
1967 by Rudolf Cejka. The result of this is that the restore tree now
1968 uses red-black binary trees rather than simple linked lists. This
1969 should give rather dramatic speed improvements for directories
1970 contining large numbers of directories/files (more than 10000).
1972 kes Fix maxruntime bug #621.
1974 ebl Implement the include JobID in spool file name project.
1975 kes Reorder projects file in order determined by Jan 2007 vote.
1976 kes Implement item #12 on project list -- quick release of FD by
1978 kes Fix open of SQLite3 db where user does not have write permission
1979 so that DIR does not crash. Fixes bug #761.
1981 kes Add back missing @ in Win32 Makefile.
1982 kes Change 'Device not configured to autolabel' from INFO
1984 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
1985 which should restart an indefinite # of times.
1986 kes Fix configure --help to print --with-mysql[=DIR]. Same for
1987 other DIR specifications.
1989 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
1990 Fix path quoting in SQLite scripts.
1991 Fix problems with SHGetFolderPath.
1993 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
1995 kes Fix Job restart on error bug that promotes an Inc to a Full
1996 backup. This should fix bug #755.
1997 kes Add qt-console and first cut of code.
2001 kes Fix Bacula->Documentation link on Win32 to point to index.html
2002 instead of bacula.html. Fixed bug #750.
2003 kes Return JobId in db_get_job_record() when JobId==0. This should
2005 kes Do not release source pointers when restarting a failed job.
2007 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
2008 This *should* fix bug #747.
2009 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
2012 kes Modify USTORE constructor to set an empty store_source string,
2013 and don't copy the store_source string in a cancel. Hopefully
2014 this will fix Arno's seg fault, bug #744.
2015 kes Add back code to disable conio in configure. Fixes bug #743.
2016 kes Correct the Options scanner in the FD to correctly handle
2017 SHA1 option, which was eating the next option. Reported by
2019 kes Add code to indicate when the SD is spooling, spool wait, and
2020 despooling as requested by Alan Brown.
2022 Version 2.0.0 released: 4 January 2007