4 \section*{Installing Bacula}
5 \label{_ChapterStart17}
6 \index[general]{Bacula!Installing }
7 \index[general]{Installing Bacula }
8 \addcontentsline{toc}{section}{Installing Bacula}
11 \index[general]{General }
12 \addcontentsline{toc}{subsection}{General}
14 In general, you will need the Bacula source release, and if you want to run a
15 Windows client, you will need the Bacula Windows binary release. However,
16 Bacula needs certain third party packages (such as {\bf SQLite}, {\bf MySQL}, or
18 to build properly depending on the options you specify. To simplify your task,
19 we have combined a number of these packages into two {\bf depkgs} releases
20 (Dependency Packages). This can vastly simplify your life by providing you
21 with all the necessary packages rather than requiring you to find them on the
22 Web, load them, and install them.
24 \subsection*{Source Release Files}
25 \index[general]{Source Files}
26 \index[general]{Release Files}
27 \addcontentsline{toc}{subsection}{Source Release File}
28 Beginning with Bacula 1.38.0, the source code has been broken into
29 four separate tar files each corresponding to a different module in
30 the Bacula CVS. The released files are:
33 \item [bacula-1.38.0.tar.gz]
34 This is the primary source code release for Bacula. On each
35 release the version number (1.38.0) will be updated.
37 \item [bacula-docs-1.38.0.tar.gz]
38 This file contains a copy of the docs directory with the
39 documents prebuild. English html directory, single html
40 file, and pdf file. The French and German translations
41 are in progress, but are not built.
43 \item [bacula-gui-1.38.0.tar.gz]
44 This file contains the non-core GUI programs. Currently,
45 it contains bacula-web, a PHP program for producing management
46 viewing of your Bacula job status in a browser; and bimagemgr
47 a browser program for burning CDROM images with Bacula Volumes.
49 \item [bacula-rescue-1.8.1.tar.gz]
50 This is the Bacula Rescue CDROM code. Note, the version number
51 of this package is not tied to the Bacula release version, so
52 it will be different. Using this code, you can burn a CDROM
53 with your system configuration and containing a statically
54 linked version of the File daemon. This can permit you to easily
55 repartition and reformat your hard disks and reload your
56 system with Bacula in the case of a hard disk failure.
61 \subsection*{Upgrading Bacula}
62 \index[general]{Bacula!Upgrading }
63 \index[general]{Upgrading Bacula }
64 \addcontentsline{toc}{subsection}{Upgrading Bacula}
66 If you are upgrading from one Bacula version to another, you should first
67 carefully read the ReleaseNotes of all versions between your current version
68 and the version to which you are upgrading. If the Bacula catalog database has
69 been upgraded, you will either need to reinitialize your database starting
70 from scratch, or save an ASCII copy of your database, then proceed to upgrade
71 it. This is normally done after Bacula is build and installed by:
74 cd <installed-scripts-dir> (default /etc/bacula)
75 ./update_bacula_tables
78 This update script can also be find in the Bacula source src/cats
81 If there are several database upgrades between your version and the
82 version to which you are upgrading, you will need to apply each database
83 upgrade script. For your convenience, you can find all the old upgrade scripts
84 in the {\bf upgradedb} directory of the source code. You will need to edit the
85 scripts to correspond to your system configuration. The final upgrade script,
86 if any, can be applied as noted above.
88 If you are upgrading from one major version to another, you will need to
89 replace all your components at the same time as generally the inter-daemon
90 protocol will change. However, within any particular release (e.g. version
91 1.32.x) unless there is an oversight or bug, the daemon protocol will not
92 change. If this is confusing, simply read the ReleaseNotes very carefully as
93 they will note if all daemons must be upgraded at the same time.
95 Finally, please note that in general it is not necessary to do a
96 {\bf make uninstall} before doing an upgrade. In fact, if you do so, you will
97 most likely delete all your conf files, which could be disastrous.
98 The normal procedure during an upgrade is simply {\bf make install}.
99 In general none of your existing .conf or .sql files will be overwritten.
101 For additional information on upgrading, please see the \ilink{Upgrading Bacula
102 Versions}{upgrading} in the Tips chapter of this manual.
105 \subsection*{Dependency Packages}
107 \index[general]{Dependency Packages }
108 \index[general]{Packages!Dependency }
109 \addcontentsline{toc}{subsection}{Dependency Packages}
111 As discussed above, we have combined a number of third party packages that
112 Bacula might need into the {\bf depkgs} and {\bf depkgs1} releases. You can,
113 of course, get the latest packages from the original authors. The locations of
114 where we obtained the packages are in the README file in each package.
115 However, be aware that the packages in the depkgs files have been tested by us
116 for compatibility with Bacula.
118 Typically, a dependency package will be named {\bf depkgs-ddMMMyy.tar.gz} and
119 {\bf depkgs1-ddMMyy.tar.gz} where {\bf dd} is the day we release it, {\bf MMM}
120 is the abbreviated month (e.g. Jan), and {\bf yy} is the year. An actual
121 example is: {\bf depkgs-07Apr02.tar.gz}. To install and build this package (if
122 needed), you do the following:
125 \item Create a {\bf bacula} directory, into which you will place both the
126 Bacula source as well as the dependency package.
127 \item Detar the {\bf depkg} into the {\bf bacula} directory.
128 \item cd bacula/depkgs
132 Although the exact composition of the dependency packages may change from time
133 to time, the current makeup is the following:
135 \addcontentsline{lot}{table}{Dependency Packages}
136 \begin{longtable}{|l|l|l|l|}
138 \multicolumn{1}{|c| }{\bf 3rd Party Package } & \multicolumn{1}{c| }{\bf
139 depkgs } & \multicolumn{1}{c| }{\bf depkgs1 } & \multicolumn{1}{c| }{\bf
141 \hline {SQLite } & \multicolumn{1}{c| }{X } & \multicolumn{1}{c| }{- } &
142 \multicolumn{1}{c| }{- } \\
143 \hline {mtx } & \multicolumn{1}{c| }{X } & \multicolumn{1}{c| }{- } &
144 \multicolumn{1}{c| }{- } \\
145 \hline {readline } & \multicolumn{1}{c| }{- } & \multicolumn{1}{c| }{X } &
146 \multicolumn{1}{c| }{- } \\
147 \hline {pthreads } & \multicolumn{1}{c| }{- } & \multicolumn{1}{c| }{- } &
148 \multicolumn{1}{c| }{X } \\
149 \hline {zlib } & \multicolumn{1}{c| }{- } & \multicolumn{1}{c| }{- } &
150 \multicolumn{1}{c| }{X } \\
151 \hline {wxWidgets } & \multicolumn{1}{c| }{- } & \multicolumn{1}{c| }{- } &
152 \multicolumn{1}{c| }{X }
157 Note, some of these packages are quite large, so that building them can be a
158 bit time consuming. The above instructions will build all the packages
159 contained in the directory. However, when building Bacula, it will take only
160 those pieces that it actually needs.
162 Alternatively, you can make just the packages that are needed. For example,
171 will configure and build only the SQLite package.
173 You should build the packages that you will require in {\bf depkgs} and/or
174 {\bf depkgs1} prior to configuring and building Bacula, since Bacula will need
175 them during the build process.
177 Even if you do not use SQLite, you might find it worthwhile to build {\bf mtx}
178 because the {\bf tapeinfo} program that comes with it can often provide you
179 with valuable information about your SCSI tape drive (e.g. compression,
180 min/max block sizes, ...).
182 The {\bf depkgs-win32} package contains the source code for the pthreads,
183 zlib, and wxWidgets libraries used by the native Win32 client program. It
184 will only be needed if you intend to build the Win32 client from source.
186 \subsection*{Supported Operating Systems}
188 \index[general]{Systems!Supported Operating }
189 \index[general]{Supported Operating Systems }
190 \addcontentsline{toc}{subsection}{Supported Operating Systems}
193 \ilink{ Supported Operating Systems}{SupportedOSes} section
194 of the QuickStart chapter of this manual.
196 \subsection*{Building Bacula from Source}
198 \index[general]{Source!Building Bacula from }
199 \index[general]{Building Bacula from Source }
200 \addcontentsline{toc}{subsection}{Building Bacula from Source}
202 The basic installation is rather simple.
205 \item Install and build any {\bf depkgs} as noted above.
206 \item Configure and install MySQL or PostgreSQL (if desired).
207 \ilink{Installing and Configuring MySQL Phase I}{_ChapterStart} or
208 \ilink{Installing and Configuring PostgreSQL Phase
209 I}{_ChapterStart10}. If you are installing from rpms, and are
210 using MySQL, please be sure to install {\bf mysql-devel}, so that the MySQL
211 header files are available while compiling Bacula. In addition, the MySQL
212 client library {\bf mysqlclient} requires the gzip compression library {\bf
213 libz.a} or {\bf libz.so}. If you are using rpm packages, these libraries are
214 in the {\bf libz-devel} package. On Debian systems, you will need to load the
215 {\bf zlib1g-dev} package. If you are not using rpms or debs, you will need to
216 find the appropriate package for your system.
218 Note, if you already have a running MySQL or PostgreSQL on your system, you
219 can skip this phase provided that you have built the thread safe libraries.
220 And you have already installed the additional rpms noted above.
222 \item As an alternative to MySQL and PostgreSQL, configure and install SQLite,
223 which is part of the {\bf depkgs}.
224 \ilink{Installing and Configuring SQLite}{_ChapterStart33}.
226 \item Detar the Bacula source code preferably into the {\bf bacula} directory
229 \item {\bf cd} to the directory containing the source code.
231 \item ./configure (with appropriate options as described below)
233 \item Check the output of ./configure very carefully, especially the Install
234 binaries and Install config directories. If they are not correct,
235 please rerun ./configure until they are. The output from ./configure is
236 stored in {\bf config.out} and can be re-displayed at any time without
237 rerunning the ./configure by doing {\bf cat config.out}.
239 \item If after running ./configure once, you decide to change options and
240 re-run it, that is perfectly fine, but before re-running it, you should run:
249 so that you are sure to start from scratch and not have a mixture of the two
250 options. This is because ./configure caches much of the information. The {\bf
251 make distclean} is also critical if you move the source directory from one
252 machine to another. If the {\bf make distclean} fails, just ignore it and
256 If you get errors while linking in the Storage daemon directory
257 (src/stored), it is probably because you have not loaded the static
258 libraries on your system. I noticed this problem on a Solaris system.
259 To correct it, make sure that you have not added {\bf
260 {-}{-}enable-static-tools} to the {\bf ./configure} command.
264 \item If you are new to Bacula, we {\bf strongly} recommend that you skip
265 the next step and use the default configuration files, then run the
266 example program in the next chapter, then come back and modify your
267 configuration files to suit your particular needs.
269 \item Customize the configuration files for each of the three daemons
270 (Directory, File, Storage) and for the Console program. For the details
271 of how to do this, please see \ilink{Setting Up Bacula Configuration
272 Files}{_ChapterStart16} in the Configuration chapter of this manual. We
273 recommend that you start by modifying the default configuration files
274 supplied, making the minimum changes necessary. Complete customization
275 can be done after you have Bacula up and running. Please take care when
276 modifying passwords, which were randomly generated, and the {\bf Name}s
277 as the passwords and names must agree between the configuration files
278 for security reasons. \item Create the Bacula MySQL database and tables
280 \ilink{Installing and Configuring MySQL Phase II}{mysql_phase2} or
281 create the Bacula PostgreSQL database and tables
282 \ilink{Installing and Configuring PostgreSQL Phase
283 II}{PostgreSQL_phase2} or alternatively if you are using
285 \ilink{Installing and Configuring SQLite Phase II}{phase2}.
287 \item Start Bacula ({\bf ./bacula start}) Note. the next chapter shows you
288 how to do this in detail.
290 \item Interface with Bacula using the Console program
292 \item For the previous two items, please follow the instructions in the
293 \ilink{Running Bacula}{_ChapterStart1} chapter of this manual,
294 where you will run a simple backup and do a restore. Do this before you make
295 heavy modifications to the configuration files so that you are sure that
296 Bacula works and are familiar with it. After that changing the conf files
298 \item If after installing Bacula, you decide to "move it", that is to
299 install it in a different set of directories, proceed as follows:
305 ./configure (your-new-options)
314 If all goes well, the {\bf ./configure} will correctly determine which
315 operating system you are running and configure the source code appropriately.
316 Currently, FreeBSD, Linux (RedHat), and Solaris are supported. MacOS X 10.3 is
317 reported to work with the Client only as long as readline support is disabled.
320 If you install Bacula on more than one system, and they are identical, you can
321 simply transfer the source tree to that other system and do a "make
322 install". However, if there are differences in the libraries or OS versions,
323 or you wish to install on a different OS, you should start from the original
324 compress tar file. If you do transfer the source tree, and you have previously
325 done a ./configure command, you MUST do:
333 prior to doing your new ./configure. This is because the GNU autoconf tools
334 cache the configuration, and if you re-use a configuration for a Linux machine
335 on a Solaris, you can be sure your build will fail. To avoid this, as
336 mentioned above, either start from the tar file, or do a "make distclean".
338 In general, you will probably want to supply a more complicated {\bf
339 configure} statement to ensure that the modules you want are built and that
340 everything is placed into the correct directories.
342 For example, on RedHat, one could use the following:
348 --sbindir=$HOME/bacula/bin \
349 --sysconfdir=$HOME/bacula/bin \
350 --with-pid-dir=$HOME/bacula/bin/working \
351 --with-subsys-dir=$HOME/bacula/bin/working \
352 --with-mysql=$HOME/mysql \
353 --with-working-dir=$HOME/bacula/bin/working \
354 --with-dump-email=$USER
358 Note, the advantage of using the above configuration to start is that
359 everything will be put into a single directory, which you can later delete
360 once you have run the examples in the next chapter and learned how Bacula
361 works. In addition, the above can be installed and run as non-root.
363 For the developer's convenience, I have added a {\bf defaultconfig} script to
364 the {\bf examples} directory. This script contains the statements that you
365 would normally use, and each developer/user may modify them to suit his needs.
366 You should find additional useful examples in this directory as well.
368 The {\bf \verb:--:enable-conio} or {\bf \verb:--:enable-readline} options are useful because
369 they provide a command line history and editing capability for the Console
370 program. If you have included either option in the build, either the {\bf
371 termcap} or the {\bf ncurses} package will be needed to link. On some systems,
372 such as SuSE, the termcap library is not in the standard library directory. As
373 a consequence, the option may be disabled or you may get an error message such
378 /usr/lib/gcc-lib/i586-suse-linux/3.3.1/.../ld:
379 cannot find -ltermcap
380 collect2: ld returned 1 exit status
384 while building the Bacula Console. In that case, you will need to set the {\bf
385 LDFLAGS} environment variable prior to building.
389 export LDFLAGS="-L/usr/lib/termcap"
393 The same library requirements apply if you wish to use the readline
394 subroutines for command line editing and history or
395 if you are using a MySQL library that requires encryption. If you need encryption,
396 you can either export the appropriate additional library options as shown
397 above or, alternatively, you can include them directly on the ./configure line
402 LDFLAGS="-lssl -lcyrpto" \
408 On some systems such as Mandriva, readline tends to
409 gobble up prompts, which makes it totally useless. If this happens to you, use
410 the disable option, or if you are using version 1.33 and above try using {\bf
411 \verb:--:enable-conio} to use a built-in readline replacement. You will still need
412 either the termcap or the ncurses library, but it is unlikely that the {\bf conio}
413 package will gobble up prompts.
415 readline is no longer supported after version 1.34. The code within Bacula
416 remains, so it should be usable, and if users submit patches for it, I will
417 be happy to apply them. However, due to the fact that each version of
418 readline seems to be incompatible with previous versions, and that there
419 are significant differences between systems, I can no longer afford to
422 \subsection*{What Database to Use?}
424 \index[general]{What Database to Use? }
425 \index[general]{Use!What Database to }
426 \addcontentsline{toc}{subsection}{What Database to Use?}
428 Before building Bacula you need to decide if you want to use SQLite, MySQL, or
429 PostgreSQL. If you are not already running MySQL or PostgreSQL, you might
430 want to start by testing with SQLite. This will greatly simplify the setup for you
431 because SQLite is compiled into Bacula an requires no administration. It
432 performs well and is suitable for small to medium sized installations (maximum
433 10-20 machines). However, we should note that a number of users have
434 had unexplained database corruption with SQLite. For that reason, we
435 recommend that you install either MySQL or PostgreSQL for production
438 If you wish to use MySQL as the Bacula catalog, please see the
439 \ilink{Installing and Configuring MySQL}{_ChapterStart} chapter of
440 this manual. You will need to install MySQL prior to continuing with the
441 configuration of Bacula. MySQL is a high quality database that is very
442 efficient and is suitable for any sized installation. It is slightly more
443 complicated than SQLite to setup and administer because it has a number of
444 sophisticated features such as userids and passwords. It runs as a separate
445 process, is truly professional and can manage a database of any size.
447 If you wish to use PostgreSQL as the Bacula catalog, please see the
448 \ilink{Installing and Configuring PostgreSQL}{_ChapterStart10}
449 chapter of this manual. You will need to install PostgreSQL prior to
450 continuing with the configuration of Bacula. PostgreSQL is very similar to
451 MySQL, though it tends to be slightly more SQL92 compliant and has many more
452 advanced features such as transactions, stored procedures, and the such. It
453 requires a certain knowledge to install and maintain.
455 If you wish to use SQLite as the Bacula catalog, please see
456 \ilink{Installing and Configuring SQLite}{_ChapterStart33} chapter of
459 \subsection*{Quick Start}
460 \index[general]{Quick Start }
461 \index[general]{Start!Quick }
462 \addcontentsline{toc}{subsection}{Quick Start}
464 There are a number of options and important considerations given below
465 that you can skip for the moment if you have not had any problems building
466 Bacula with a simplified configuration as shown above.
468 If the ./configure process is unable to find specific libraries (e.g.
469 libintl, you should ensure that the appropriate package is installed on
470 your system. Alternatively, if the package is installed in a non-standard
471 location (as far as Bacula is concerned), then there is generally an
472 option listed below (or listed with "./configure {-}{-}help" that will
473 permit you to specify the directory that should be searched. In other
474 cases, there are options that will permit you to disable to feature
475 (e.g. {-}{-}disable-nls).
477 If you want to dive right into it, we recommend you skip to the next chapter,
478 and run the example program. It will teach you a lot about Bacula and as an
479 example can be installed into a single directory (for easy removal) and run as
480 non-root. If you have any problems or when you want to do a real installation,
481 come back to this chapter and read the details presented below.
483 \subsection*{Configure Options}
485 \index[general]{Options!Configure }
486 \index[general]{Configure Options }
487 \addcontentsline{toc}{subsection}{Configure Options}
489 The following command line options are available for {\bf configure} to
490 customize your installation.
493 \item [ {-}{-}sysbindir=\lt{}binary-path\gt{}]
494 \index[general]{{-}{-}sysbindir }
495 Defines where the Bacula binary (executable) files will be placed during a
496 {\bf make install} command.
498 \item [ {-}{-}sysconfdir=\lt{}config-path\gt{}]
499 \index[general]{{-}{-}sysconfdir }
500 Defines where the Bacula configuration files should be placed during a
501 {\bf make install} command.
503 \item [ {-}{-}mandir=\lt{}path\gt{}]
504 \index[general]{{-}{-}mandir}
505 By default, Bacula will install a simple Unix man page in
506 /usr/share/man. If you wish the man page to be installed in
507 a different location, use this option to specify the path.
508 Note, the main HTML and PDF Bacula documents are in a separate
509 tar file that is not part of the source distribution.
511 \item [ {-}{-}datadir=\lt{}path\gt{}]
512 \index[general]{{-}{-}datadir}
513 If you translate Bacula or parts of Bacula into a different language
514 you may specify the location of the po files using the {\bf
515 {-}{-}datadir} option. You must manually install any po files as
516 Bacula does not (yet) automatically do so.
519 \item [ {-}{-}enable-smartalloc ]
520 \index[general]{{-}{-}enable-smartalloc }
521 This enables the inclusion of the Smartalloc orphaned buffer detection
522 code. This option is highly recommended. Because we never build
523 without this option, you may experience problems if it is not enabled.
524 In this case, simply re-enable the option. We strongly recommend
525 keeping this option enabled as it helps detect memory leaks. This
526 configuration parameter is used while building Bacula
528 \item [ {-}{-}enable-gnome ]
529 \index[general]{{-}{-}enable-gnome }
530 If you have GNOME installed on your computer including the
531 gnome development libraries, and you want to use the
532 GNOME GUI Console interface to Bacula, you must specify this option.
533 Doing so will build everything in the {\bf src/gnome-console} directory.
535 \item [ {-}{-}enable-wx-console ]
536 \index[general]{{-}{-}enable-wx-console }
537 If you have wxWidgets installed on your computer and you want to use the
538 wxWidgets GUI Console interface to Bacula, you must specify this option.
539 Doing so will build everything in the {\bf src/wx-console} directory.
540 This could also be useful to users who want a GUI Console and don't want
541 to install Gnome, as wxWidgets can work with GTK+, Motif or even X11
545 \item [ {-}{-}enable-tray-monitor ]
546 \index[general]{{-}{-}enable-tray-monitor }
547 If you have GTK installed on your computer, you run a graphical
548 environment or a window manager compatible with the FreeDesktop system
549 tray standard (like KDE and GNOME) and you want to use a GUI to monitor
550 Bacula daemons, you must specify this option. Doing so will build
551 everything in the {\bf src/tray-monitor} directory.
553 \item [ {-}{-}enable-static-tools]
554 \index[general]{{-}{-}enable-static-tools }
555 This option causes the linker to link the Storage daemon utility tools
556 ({\bf bls}, {\bf bextract}, and {\bf bscan}) statically. This permits
557 using them without having the shared libraries loaded. If you have
558 problems linking in the {\bf src/stored} directory, make sure you have
559 not enabled this option, or explicitly disable static linking by adding
560 {\bf \verb:--:disable-static-tools}.
563 \item [ {-}{-}enable-static-fd]
564 \index[general]{{-}{-}enable-static-fd }
565 This option causes the make process to build a {\bf static-bacula-fd} in
566 addition to the standard File daemon. This static version will include
567 statically linked libraries and is required for the Bare Metal recovery.
568 This option is largely superseded by using {\bf make static-bacula-fd}
569 from with in the {\bf src/filed} directory. Also, the {\bf
570 \verb:--:enable-client-only} option described below is useful for just
571 building a client so that all the other parts of the program are not
574 When linking a static binary, the linker needs the static versions
575 of all the libraries that are used, so frequently users will
576 experience linking errors when this option is used. The first
577 thing to do is to make sure you have the static glibc library
578 installed on your system. The second thing to do is the make sure
579 you do not specify {\bf {-}{-}openssl} or {\bf {-}{-}with-python}
580 on your ./configure statement as these options require additional
581 libraries. You may be able to enable those options, but you will
582 need to load additional static libraries.
585 \item [ {-}{-}enable-static-sd]
586 \index[general]{{-}{-}enable-static-sd }
587 This option causes the make process to build a {\bf static-bacula-sd} in
588 addition to the standard Storage daemon. This static version will
589 include statically linked libraries and could be useful during a Bare
592 When linking a static binary, the linker needs the static versions
593 of all the libraries that are used, so frequently users will
594 experience linking errors when this option is used. The first
595 thing to do is to make sure you have the static glibc library
596 installed on your system. The second thing to do is the make sure
597 you do not specify {\bf {-}{-}openssl} or {\bf {-}{-}with-python}
598 on your ./configure statement as these options require additional
599 libraries. You may be able to enable those options, but you will
600 need to load additional static libraries.
604 \item [ {-}{-}enable-static-dir]
605 \index[general]{{-}{-}enable-static-dir }
606 This option causes the make process to build a {\bf static-bacula-dir}
607 in addition to the standard Director. This static version will include
608 statically linked libraries and could be useful during a Bare Metal
611 When linking a static binary, the linker needs the static versions
612 of all the libraries that are used, so frequently users will
613 experience linking errors when this option is used. The first
614 thing to do is to make sure you have the static glibc library
615 installed on your system. The second thing to do is the make sure
616 you do not specify {\bf {-}{-}openssl} or {\bf {-}{-}with-python}
617 on your ./configure statement as these options require additional
618 libraries. You may be able to enable those options, but you will
619 need to load additional static libraries.
622 \item [ {-}{-}enable-static-cons]
623 \index[general]{{-}{-}enable-static-cons }
624 This option causes the make process to build a {\bf static-console} and
625 a {\bf static-gnome-console} in addition to the standard console. This
626 static version will include statically linked libraries and could be
627 useful during a Bare Metal recovery.
629 When linking a static binary, the linker needs the static versions
630 of all the libraries that are used, so frequently users will
631 experience linking errors when this option is used. The first
632 thing to do is to make sure you have the static glibc library
633 installed on your system. The second thing to do is the make sure
634 you do not specify {\bf {-}{-}openssl} or {\bf {-}{-}with-python}
635 on your ./configure statement as these options require additional
636 libraries. You may be able to enable those options, but you will
637 need to load additional static libraries.
640 \item [ {-}{-}enable-client-only]
641 \index[general]{{-}{-}enable-client-only }
642 This option causes the make process to build only the File daemon and
643 the libraries that it needs. None of the other daemons, storage tools,
644 nor the console will be built. Likewise a {\bf make install} will then
645 only install the File daemon. To cause all daemons to be built, you
646 will need to do a configuration without this option. This option
647 greatly facilitates building a Client on a client only machine.
649 When linking a static binary, the linker needs the static versions
650 of all the libraries that are used, so frequently users will
651 experience linking errors when this option is used. The first
652 thing to do is to make sure you have the static glibc library
653 installed on your system. The second thing to do is the make sure
654 you do not specify {\bf {-}{-}openssl} or {\bf {-}{-}with-python}
655 on your ./configure statement as these options require additional
656 libraries. You may be able to enable those options, but you will
657 need to load additional static libraries.
660 \item [ {-}{-}enable-largefile]
661 \index[general]{{-}{-}enable-largefile }
662 This option (default) causes Bacula to be built with 64 bit file address
663 support if it is available on your system. This permits Bacula to read and
664 write files greater than 2 GBytes in size. You may disable this feature and
665 revert to 32 bit file addresses by using {\bf \verb:--:disable-largefile}.
667 \item [ {-}{-}disable-nls]
668 \index[general]{{-}{-}disable-nls}
669 By default, Bacula uses the GNU Native Language Support (NLS) libraries. On
670 some machines, these libraries may not be present or may not function
671 correctly (especially on non-Linux implementations). In such cases, you
672 may specify {\bf {-}{-}disable-nls} to disable use of those libraries.
673 In such a case, Bacula will revert to using English.
675 \item [ {-}{-}with-sqlite=\lt{}sqlite-path\gt{}]
676 \index[general]{{-}{-}with-sqlite }
677 This enables use of the SQLite version 2.8.x database. The {\bf sqlite-path} is not
678 normally specified as Bacula looks for the necessary components in a
679 standard location ({\bf depkgs/sqlite}). See
680 \ilink{Installing and Configuring SQLite}{_ChapterStart33} chapter of
681 this manual for more details.
683 See the note below under the {-}{-}with-postgresql item.
685 \item [ {-}{-}with-sqlite3=\lt{}sqlite3-path\gt{}]
686 \index[general]{{-}{-}with-sqlite3 }
687 This enables use of the SQLite version 3.x database. The {\bf
688 sqlite3-path} is not normally specified as Bacula looks for the
689 necessary components in a standard location ({\bf depkgs/sqlite3}). See
690 \ilink{Installing and Configuring SQLite}{_ChapterStart33} chapter of
691 this manual for more details.
693 \item [ {-}{-}with-mysql=\lt{}mysql-path\gt{}]
694 \index[general]{{-}{-}with-mysql }
695 This enables building of the Catalog services for Bacula. It assumes
696 that MySQL is running on your system, and expects it to be installed in
697 the {\bf mysql-path} that you specify. Normally, if MySQL is installed
698 in a standard system location, you can simply use {\bf {-}{-}with-mysql}
699 with no path specification. If you do use this option, please proceed
700 to installing MySQL in the \ilink{Installing and Configuring
701 MySQL}{_ChapterStart} chapter before proceeding with the configuration.
703 See the note below under the {-}{-}with-postgresql item.
705 \item [ {-}{-}with-postgresql=\lt{}path\gt{}]
706 \index[general]{{-}{-}with-postgresql }
707 This provides an explicit path to the PostgreSQL libraries if Bacula
708 cannot find it by default. Normally to build with PostgreSQL, you would
709 simply use {\bf {-}{-}with-postgresql}.
711 Note, for Bacula to be configured properly, you must specify one
712 of the four database options supported. That is:
713 {-}{-}with-sqlite, {-}{-}with-sqlite3, {-}{-}with-mysql, or
714 {-}{-}with-postgresql, otherwise the ./configure will fail.
716 \item [ {-}{-}with-openssl=\lt{}path\gt{}]
717 This configuration option is necessary if you want to enable TLS (ssl)
718 in Bacula. Normally, the {\bf path} specification is not necessary since
719 the configuration searches for the OpenSSL libraries in standard system
720 locations. Enabling OpenSSL in Bacula permits secure communications
721 between the daemons. For more information on using TLS, please see the
722 \ilink{Bacula TLS}{_ChapterStart61} chapter of this manual.
725 \item [ {-}{-}with-python=\lt{}path\gt{}]
726 \index[general]{{-}{-}with-python }
727 This option enables Bacula support for Python. If no path is
728 supplied, configure will search the
729 standard library locations for Python 2.2, 2.3, or 2.4. If it cannot
730 find the library, you will need to supply a path to your Python
731 library directory. Please see the
732 \ilink{Python chapter}{_ChapterStart60} for the details of using
735 \item [ {-}{-}with-libintl-prefix=\lt{}DIR\gt{}]
736 \index[general]{{-}{-}with-libintl-prefix}
737 This option may be used to tell Bacula to search DIR/include and
738 DIR/lib for the libintl headers and libraries needed for Native
739 Language Support (NLS).
741 \item [ {-}{-}enable-conio]
742 \index[general]{{-}{-}enable-conio }
743 Tells Bacula to enable building the small, light weight readline
744 replacement routine. It is generally much easier to configure than
745 readline, although, like readline, it needs either the termcap or
748 \item [ {-}{-}with-readline=\lt{}readline-path\gt{}]
749 \index[general]{{-}{-}with-readline }
750 Tells Bacula where {\bf readline} is installed. Normally, Bacula will
751 find readline if it is in a standard library. If it is not found and no
752 {-}{-}with-readline is specified, readline will be disabled. This
753 option affects the Bacula build. Readline provides the Console program
754 with a command line history and editing capability and is no longer
755 supported, so you are on your own if you have problems.
757 \item [ {-}{-}enable-readline]
758 \index[general]{{-}{-}enable-readline }
759 Tells Bacula to enable readline support. It is normally disabled due to the
760 large number of configuration problems and the fact that the package seems to
761 change in incompatible ways from version to version.
763 \item [ {-}{-}with-tcp-wrappers=\lt{}path\gt{}]
764 \index[general]{{-}{-}with-tcp-wrappers }
765 This specifies that you want TCP wrappers (man hosts\_access(5)) compiled in.
766 The path is optional since Bacula will normally find the libraries in the
767 standard locations. This option affects the Bacula build. In specifying your
768 restrictions in the {\bf /etc/hosts.allow} or {\bf /etc/hosts.deny} files, do
769 not use the {\bf twist} option (hosts\_options(5)) or the Bacula process will
770 be terminated. Note, when setting up your {\bf /etc/hosts.allow}
771 or {\bf /etc/hosts.deny}, you must identify the Bacula daemon in
772 question with the name you give it in your conf file rather than the
773 name of the executable.
775 For more information on configuring and testing TCP wrappers, please see the
776 \ilink{Configuring and Testing TCP Wrappers}{wrappers} section
777 in the Security Chapter.
779 \item [ {-}{-}with-working-dir=\lt{}working-directory-path\gt{} ]
780 \index[general]{{-}{-}with-working-dir }
781 This option is mandatory and specifies a directory into which Bacula may
782 safely place files that will remain between Bacula executions. For example,
783 if the internal database is used, Bacula will keep those files in this
784 directory. This option is only used to modify the daemon configuration
785 files. You may also accomplish the same thing by directly editing them later.
786 The working directory is not automatically created by the install process, so
787 you must ensure that it exists before using Bacula for the first time.
789 \item [ {-}{-}with-base-port=\lt{}port=number\gt{}]
790 \index[general]{{-}{-}with-base-port }
791 In order to run, Bacula needs three TCP/IP ports (one for the Bacula
792 Console, one for the Storage daemon, and one for the File daemon). The {\bf
793 \verb:--:with-baseport} option will automatically assign three ports beginning at
794 the base port address specified. You may also change the port number in the
795 resulting configuration files. However, you need to take care that the
796 numbers correspond correctly in each of the three daemon configuration
797 files. The default base port is 9101, which assigns ports 9101 through 9103.
798 These ports (9101, 9102, and 9103) have been officially assigned to Bacula by
799 IANA. This option is only used to modify the daemon configuration files. You
800 may also accomplish the same thing by directly editing them later.
802 \item [ {-}{-}with-dump-email=\lt{}email-address\gt{}]
803 \index[general]{{-}{-}with-dump-email }
804 This option specifies the email address where any core dumps should be set.
805 This option is normally only used by developers.
807 \item [ {-}{-}with-pid-dir=\lt{}PATH\gt{} ]
808 \index[general]{{-}{-}with-pid-dir }
809 This specifies where Bacula should place the process id file during
810 execution. The default is: {\bf /var/run}. This directory is not created by
811 the install process, so you must ensure that it exists before using Bacula
814 \item [ {-}{-}with-subsys-dir=\lt{}PATH\gt{}]
815 \index[general]{{-}{-}with-subsys-dir }
816 This specifies where Bacula should place the subsystem lock file during
817 execution. The default is {\bf /var/run/subsys}. Please make sure that you do
818 not specify the same directory for this directory and for the {\bf sbindir}
819 directory. This directory is used only within the autostart scripts. The
820 subsys directory is not created by the Bacula install, so you must be sure to
821 create it before using Bacula.
823 \item [ {-}{-}with-dir-password=\lt{}Password\gt{}]
824 \index[general]{{-}{-}with-dir-password }
825 This option allows you to specify the password used to access the Directory
826 (normally from the Console program). If it is not specified, configure will
827 automatically create a random password.
829 \item [ {-}{-}with-fd-password=\lt{}Password\gt{} ]
830 \index[general]{{-}{-}with-fd-password }
831 This option allows you to specify the password used to access the File daemon
832 (normally called from the Director). If it is not specified, configure will
833 automatically create a random password.
835 \item [ {-}{-}with-sd-password=\lt{}Password\gt{} ]
836 \index[general]{{-}{-}with-sd-password }
837 This option allows you to specify the password used to access the Directory
838 (normally called from the Director). If it is not specified, configure will
839 automatically create a random password.
841 \item [ {-}{-}with-dir-user=\lt{}User\gt{} ]
842 \index[general]{{-}{-}with-dir-user }
843 This option allows you to specify the Userid used to run the Director. The
844 Director must be started as root, but doesn't need to run as root, and
845 after doing preliminary initializations, it can "drop" to the UserId
846 specified on this option.
847 If you specify this option, you must
848 create the User prior to running {\bf make install}, because the
849 working directory owner will be set to {\bf User}.
852 \item [ {-}{-}with-dir-group=\lt{}Group\gt{} ]
853 \index[general]{{-}{-}with-dir-group }
854 This option allows you to specify the GroupId used to run the Director. The
855 Director must be started as root, but doesn't need to run as root, and after
856 doing preliminary initializations, it can "drop" to the GroupId specified
858 If you specify this option, you must
859 create the Group prior to running {\bf make install}, because the
860 working directory group will be set to {\bf Group}.
862 \item [ {-}{-}with-sd-user=\lt{}User\gt{} ]
863 \index[general]{{-}{-}with-sd-user }
864 This option allows you to specify the Userid used to run the Storage daemon.
865 The Storage daemon must be started as root, but doesn't need to run as root,
866 and after doing preliminary initializations, it can "drop" to the UserId
867 specified on this option. If you use this option, you will need to take care
868 that the Storage daemon has access to all the devices (tape drives, ...) that
871 \item [ {-}{-}with-sd-group=\lt{}Group\gt{} ]
872 \index[general]{{-}{-}with-sd-group }
873 This option allows you to specify the GroupId used to run the Storage daemon.
874 The Storage daemon must be started as root, but doesn't need to run as root,
875 and after doing preliminary initializations, it can "drop" to the GroupId
876 specified on this option.
878 \item [ {-}{-}with-fd-user=\lt{}User\gt{} ]
879 \index[general]{{-}{-}with-fd-user }
880 This option allows you to specify the Userid used to run the File daemon. The
881 File daemon must be started as root, and in most cases, it needs to run as
882 root, so this option is used only in very special cases, after doing
883 preliminary initializations, it can "drop" to the UserId specified on this
886 \item [ {-}{-}with-fd-group=\lt{}Group\gt{} ]
887 \index[general]{{-}{-}with-fd-group }
888 This option allows you to specify the GroupId used to run the File daemon.
889 The File daemon must be started as root, and in most cases, it must be run as
890 root, however, after doing preliminary initializations, it can "drop" to
891 the GroupId specified on this option.
895 Note, many other options are presented when you do a {\bf ./configure
896 \verb:--:help}, but they are not implemented.
898 \subsection*{Recommended Options for most Systems}
899 \index[general]{Systems!Recommended Options for most }
900 \index[general]{Recommended Options for most Systems }
901 \addcontentsline{toc}{subsection}{Recommended Options for most Systems}
903 For most systems, we recommend starting with the following options:
908 --enable-smartalloc \
909 --sbindir=$HOME/bacula/bin \
910 --sysconfdir=$HOME/bacula/bin \
911 --with-pid-dir=$HOME/bacula/bin/working \
912 --with-subsys-dir=$HOME/bacula/bin/working \
913 --with-mysql=$HOME/mysql \
914 --with-working-dir=$HOME/bacula/working
918 If you want to install Bacula in an installation directory rather than run it
919 out of the build directory (as developers will do most of the time), you
920 should also include the \verb:--:sbindir and \verb:--:sysconfdir options with appropriate
921 paths. Neither are necessary if you do not use "make install" as is the case
922 for most development work. The install process will create the sbindir and
923 sysconfdir if they do not exist, but it will not automatically create the
924 pid-dir, subsys-dir, or working-dir, so you must ensure that they exist before
925 running Bacula for the first time. See below for an example of how Kern does
929 \index[general]{RedHat }
930 \addcontentsline{toc}{subsection}{RedHat}
937 CFLAGS="-g -Wall" ./configure \
938 --sbindir=$HOME/bacula/bin \
939 --sysconfdir=$HOME/bacula/bin \
940 --enable-smartalloc \
941 --with-sqlite=$HOME/bacula/depkgs/sqlite \
942 --with-working-dir=$HOME/bacula/working \
943 --with-pid-dir=$HOME/bacula/bin/working \
944 --with-subsys-dir=$HOME/bacula/bin/working \
955 CFLAGS="-g -Wall" ./configure \
956 --sbindir=$HOME/bacula/bin \
957 --sysconfdir=$HOME/bacula/bin \
958 --enable-smartalloc \
959 --with-mysql=$HOME/mysql \
960 --with-working-dir=$HOME/bacula/working
961 --with-pid-dir=$HOME/bacula/bin/working \
962 --with-subsys-dir=$HOME/bacula/bin/working
968 or finally, a completely traditional RedHat Linux install:
972 CFLAGS="-g -Wall" ./configure \
974 --sbindir=/usr/sbin \
975 --sysconfdir=/etc/bacula \
976 --with-scriptdir=/etc/bacula \
977 --enable-smartalloc \
980 --with-working-dir=/var/bacula \
981 --with-pid-dir=/var/run \
982 --with-subsys-dir=/var/lock/subsys \
987 Note, Bacula assumes that /var/bacula, /var/run, and /var/loc/subsys exist so
988 it will not automatically create them during the install process.
990 Note, with gcc (GCC) 4.0.1 20050727 (Red Hat 4.0.1-5) on
991 an AMD64 CPU running 64 bit CentOS4, there is a compiler bug that generates
992 bad code that causes Bacula to segment fault. Typically you will see this
993 in the Storage daemon first. The solution is to compile Bacula ensuring
994 that no optimization is turned on (normally it is -O2).
996 \subsection*{Solaris}
997 \index[general]{Solaris }
998 \addcontentsline{toc}{subsection}{Solaris}
1000 To build Bacula from source, you will need the following installed on your
1001 system (they are not by default): libiconv, gcc 3.3.2, stdc++, libgcc (for
1002 stdc++ and gcc\_s libraries), make 3.8 or later.
1004 You will probably also need to: Add /usr/local/bin to PATH and Add
1005 /usr/ccs/bin to PATH for ar.
1010 CFLAGS="-g" ./configure \
1011 --sbindir=$HOME/bacula/bin \
1012 --sysconfdir=$HOME/bacula/bin \
1013 --with-mysql=$HOME/mysql \
1014 --enable-smartalloc \
1015 --with-pid-dir=$HOME/bacula/bin/working \
1016 --with-subsys-dir=$HOME/bacula/bin/working \
1017 --with-working-dir=$HOME/bacula/working
1021 As mentioned above, the install process will create the sbindir and sysconfdir
1022 if they do not exist, but it will not automatically create the pid-dir,
1023 subsys-dir, or working-dir, so you must ensure that they exist before running
1024 Bacula for the first time.
1026 Note, you may need to install the following packages to build Bacula
1046 PATH=/usr/bin::/usr/ccs/bin:/etc:/usr/openwin/bin:/usr/local/bin:/usr/sfw/bin:/opt/sfw/bin:/usr/ucb:/usr/sbin
1050 \subsection*{FreeBSD}
1051 \index[general]{FreeBSD }
1052 \addcontentsline{toc}{subsection}{FreeBSD}
1055 \elink{The FreeBSD Diary}{http://www.freebsddiary.org/bacula.php} for a
1056 detailed description on how to make Bacula work on your system. In addition,
1057 users of FreeBSD prior to 4.9-STABLE dated Mon Dec 29 15:18:01 2003 UTC who
1058 plan to use tape devices, please see the
1059 \ilink{Tape Testing Chapter}{FreeBSDTapes} of this manual for
1060 {\bf important} information on how to configure your tape drive for
1061 compatibility with Bacula.
1063 If you are using Bacula with MySQL, you should take care to compile MySQL with
1064 FreeBSD native threads rather than LinuxThreads, since Bacula is normally built
1065 with FreeBSD native threads rather than LinuxTreads. Mixing the two will
1069 \index[general]{Win32 }
1070 \addcontentsline{toc}{subsection}{Win32}
1072 To install the binary Win32 version of the File daemon please see the
1073 \ilink{Win32 Installation Chapter}{_ChapterStart7} in this document.
1075 \subsection*{Windows Systems with CYGWIN Installed}
1077 \index[general]{Windows Systems with CYGWIN Installed }
1078 \index[general]{Installed!Windows Systems with CYGWIN }
1079 \addcontentsline{toc}{subsection}{Windows Systems with CYGWIN Installed}
1081 As of version 1.34, Bacula no longer uses CYGWIN for the Win32 File daemon.
1082 However, it is still built under a CYGWIN build environment -- though you
1083 can probably do it with VC Studio only. If you wish to build the Win32
1084 File daemon from the source, you will need Microsoft C++ version 7.1.
1085 Details for building the Win32 FD are in the README.win32 file of the
1086 src/win32 directory.
1088 Note, although most parts of Bacula build on Windows systems, the only part
1089 that we have tested and used is the File daemon.
1091 Finally, you should follow the installation instructions in the
1092 \ilink{Win32 Installation}{_ChapterStart7} section of this document.
1094 \subsection*{Kern's Configure Script}
1095 \index[general]{Script!Kern's Configure }
1096 \index[general]{Kern's Configure Script }
1097 \addcontentsline{toc}{subsection}{Kern's Configure Script}
1099 The script that I use for building on my "production" Linux machines is:
1104 # This is Kern's configure script for Bacula
1107 --sbindir=$HOME/bacula/bin \
1108 --sysconfdir=$HOME/bacula/bin \
1109 --enable-smartalloc \
1111 --with-pid-dir=$HOME/bacula/bin/working \
1112 --with-subsys-dir=$HOME/bacula/bin/working \
1113 --with-mysql=$HOME/mysql \
1114 --with-working-dir=$HOME/bacula/bin/working \
1115 --with-dump-email=$USER \
1116 --with-smtp-host=mail.your-site.com \
1117 --with-baseport=9101
1122 Note that I define the base port as 9101, which means that Bacula will use
1123 port 9101 for the Director console, port 9102 for the File daemons, and port
1124 9103 for the Storage daemons. These ports should be available on all systems
1125 because they have been officially assigned to Bacula by IANA (Internet
1126 Assigned Numbers Authority). We strongly recommend that you use only these
1127 ports to prevent any conflicts with other programs. This is in fact the
1128 default if you do not specify a {\bf \verb:--:with-baseport} option.
1130 You may also want to put the following entries in your {\bf /etc/services}
1131 file as it will make viewing the connections made by Bacula easier to
1132 recognize (i.e. netstat -a):
1142 \subsection*{Installing Bacula}
1143 \index[general]{Bacula!Installing }
1144 \index[general]{Installing Bacula }
1145 \addcontentsline{toc}{subsection}{Installing Bacula}
1147 Before setting up your configuration files, you will want to install Bacula in
1148 its final location. Simply enter:
1156 If you have previously installed Bacula, the old binaries will be overwritten,
1157 but the old configuration files will remain unchanged, and the "new"
1158 configuration files will be appended with a {\bf .new}. Generally if you have
1159 previously installed and run Bacula you will want to discard or ignore the
1160 configuration files with the appended {\bf .new}.
1162 \subsection*{Building a File Daemon or Client}
1163 \index[general]{Client!Building a File Daemon or }
1164 \index[general]{Building a File Daemon or Client }
1165 \addcontentsline{toc}{subsection}{Building a File Daemon or Client}
1167 If you run the Director and the Storage daemon on one machine and you wish to
1168 back up another machine, you must have a copy of the File daemon for that
1169 machine. If the machine and the Operating System are identical, you can simply
1170 copy the Bacula File daemon binary file {\bf bacula-fd} as well as its
1171 configuration file {\bf bacula-fd.conf} then modify the name and password in
1172 the conf file to be unique. Be sure to make corresponding additions to the
1173 Director's configuration file ({\bf bacula-dir.conf}).
1175 If the architecture or the O/S level are different, you will need to build a
1176 File daemon on the Client machine. To do so, you can use the same {\bf
1177 ./configure} command as you did for your main program, starting either from a
1178 fresh copy of the source tree, or using {\bf make\ distclean} before the {\bf
1181 Since the File daemon does not access the Catalog database, you can remove
1182 the {\bf \verb:--:with-mysql} or {\bf \verb:--:with-sqlite} options, then
1183 add {\bf \verb:--:enable-client-only}. This will compile only the
1184 necessary libraries and the client programs and thus avoids the necessity
1185 of installing one or another of those database programs to build the File
1186 daemon. With the above option, you simply enter {\bf make} and just the
1187 client will be built.
1190 \subsection*{Auto Starting the Daemons}
1191 \index[general]{Daemons!Auto Starting the }
1192 \index[general]{Auto Starting the Daemons }
1193 \addcontentsline{toc}{subsection}{Auto Starting the Daemons}
1195 If you wish the daemons to be automatically started and stopped when your
1196 system is booted (a good idea), one more step is necessary. First, the
1197 ./configure process must recognize your system -- that is it must be a
1198 supported platform and not {\bf unknown}, then you must install the platform
1199 dependent files by doing:
1204 make install-autostart
1208 Please note, that the auto-start feature is implemented only on systems
1209 that we officially support (currently, FreeBSD, RedHat/Fedora Linux, and
1210 Solaris), and has only been fully tested on Fedora Linux.
1212 The {\bf make install-autostart} will cause the appropriate startup scripts
1213 to be installed with the necessary symbolic links. On RedHat/Fedora Linux
1214 systems, these scripts reside in {\bf /etc/rc.d/init.d/bacula-dir} {\bf
1215 /etc/rc.d/init.d/bacula-fd}, and {\bf /etc/rc.d/init.d/bacula-sd}. However
1216 the exact location depends on what operating system you are using.
1218 If you only wish to install the File daemon, you may do so with:
1222 make install-autostart-fd
1226 \subsection*{Other Make Notes}
1227 \index[general]{Notes!Other Make }
1228 \index[general]{Other Make Notes }
1229 \addcontentsline{toc}{subsection}{Other Make Notes}
1231 To simply build a new executable in any directory, enter:
1239 To clean out all the objects and binaries (including the files named 1, 2, or
1240 3, which Kern uses as temporary files), enter:
1248 To really clean out everything for distribution, enter:
1256 note, this cleans out the Makefiles and is normally done from the top level
1257 directory to prepare for distribution of the source. To recover from this
1258 state, you must redo the {\bf ./configure} in the top level directory, since
1259 all the Makefiles will be deleted.
1261 To add a new file in a subdirectory, edit the Makefile.in in that directory,
1262 then simply do a {\bf make}. In most cases, the make will rebuild the Makefile
1263 from the new Makefile.in. In some case, you may need to issue the {\bf make} a
1264 second time. In extreme cases, cd to the top level directory and enter: {\bf
1267 To add dependencies:
1275 The {\bf make depend} appends the header file dependencies for each of the
1276 object files to Makefile and Makefile.in. This command should be done in each
1277 directory where you change the dependencies. Normally, it only needs to be run
1278 when you add or delete source or header files. {\bf make depend} is normally
1279 automatically invoked during the configuration process.
1289 This not normally done if you are developing Bacula, but is used if you are
1290 going to run it to backup your system.
1292 After doing a {\bf make install} the following files will be installed on your
1293 system (more or less). The exact files and location (directory) for each file
1294 depends on your {\bf ./configure} command (e.g. gnome-console and
1295 gnome-console.conf are not installed if you do not configure GNOME. Also, if
1296 you are using SQLite instead of mysql, some of the files will be different).
1317 create_mysql_database
1319 delete_catalog_backup
1340 \subsection*{Installing Tray Monitor}
1341 \index[general]{Monitor!Installing Tray }
1342 \index[general]{Installing Tray Monitor }
1343 \addcontentsline{toc}{subsection}{Installing Tray Monitor}
1345 The Tray Monitor is already installed if you used the {\bf
1346 \verb:--:enable-tray-monitor} configure option and ran {\bf make install}.
1348 As you don't run your graphical environment as root (if you do, you should
1349 change that bad habit), don't forget to allow your user to read {\bf
1350 tray-monitor.conf}, and to execute {\bf bacula-tray-monitor} (this is not a
1353 Then log into your graphical environment (KDE, Gnome or something else), run
1354 {\bf bacula-tray-monitor} as your user, and see if a cassette icon appears
1355 somewhere on the screen, usually on the task bar.
1356 If it doesn't, follow the instructions below related to your environment or
1359 \subsubsection*{GNOME}
1360 \index[general]{GNOME }
1361 \addcontentsline{toc}{subsubsection}{GNOME}
1363 System tray, or notification area if you use the GNOME terminology, has been
1364 supported in GNOME since version 2.2. To activate it, right-click on one of
1365 your panels, open the menu {\bf Add to this Panel}, then {\bf Utility} and
1366 finally click on {\bf Notification Area}.
1368 \subsubsection*{KDE}
1369 \index[general]{KDE }
1370 \addcontentsline{toc}{subsubsection}{KDE}
1372 System tray has been supported in KDE since version 3.1. To activate it,
1373 right-click on one of your panels, open the menu {\bf Add}, then {\bf Applet}
1374 and finally click on {\bf System Tray}.
1376 \subsubsection*{Other window managers}
1377 \index[general]{Managers!Other window }
1378 \index[general]{Other window managers }
1379 \addcontentsline{toc}{subsubsection}{Other window managers}
1381 Read the documentation to know if the Freedesktop system tray standard is
1382 supported by your window manager, and if applicable, how to activate it.
1384 \subsection*{Modifying the Bacula Configuration Files}
1385 \index[general]{Modifying the Bacula Configuration Files }
1386 \index[general]{Files!Modifying the Bacula Configuration }
1387 \addcontentsline{toc}{subsection}{Modifying the Bacula Configuration Files}
1390 \ilink{Configuring Bacula}{_ChapterStart16} in this manual for
1391 instructions on how to set Bacula configuration files.