4 \chapter{Installing Bacula}
6 \index[general]{Bacula!Installing}
7 \index[general]{Installing Bacula}
9 In general, you will need the Bacula source release, and if you want to run
10 a Windows client, you will need the Bacula Windows binary release.
11 However, Bacula needs certain third party packages (such as {\bf MySQL},
12 {\bf PostgreSQL}, or {\bf SQLite} to build and run
13 properly depending on the
14 options you specify. Normally, {\bf MySQL} and {\bf PostgreSQL} are
15 packages that can be installed on your distribution. However, if you do
16 not have them, to simplify your task, we have combined a number of these
17 packages into three {\bf depkgs} releases (Dependency Packages). This can
18 vastly simplify your life by providing you with all the necessary packages
19 rather than requiring you to find them on the Web, load them, and install
22 \section{Source Release Files}
23 \index[general]{Source Files}
24 \index[general]{Release Files}
25 Beginning with Bacula 1.38.0, the source code has been broken into
26 four separate tar files each corresponding to a different module in
27 the Bacula SVN. The released files are:
30 \item [bacula-5.0.0.tar.gz]
31 This is the primary source code release for Bacula. On each
32 release the version number (5.0.0) will be updated.
34 \item [bacula-docs-5.0.0.tar.bz2]
35 This file contains a copy of the docs directory with the
36 documents prebuild. English HTML directory, single HTML
37 file, and pdf file. The French, German, Spanish translations
38 are in progress, but are not built.
40 \item [bacula-gui-5.0.0.tar.gz]
41 This file contains the non-core GUI programs. Currently,
42 it contains bacula-web, a PHP program for producing management
43 viewing of your Bacula job status in a browser; and bimagemgr
44 a browser program for burning CDROM images with Bacula Volumes.
46 \item [bacula-rescue-5.0.0.tar.gz]
47 This is the Bacula Rescue USB key code. Note, the version number
48 of this package is not always tied to the Bacula release version, so
49 it may be different. Using this code, you can create a USB key
50 with your system configuration and containing a statically
51 linked version of the File daemon. This can permit you to easily
52 repartition and reformat your hard disks and reload your
53 system with Bacula in the case of a hard disk failure.
55 \item [win32bacula-5.0.0.exe]
56 This file is the 32 bit Windows installer for installing
57 the Windows client (File daemon) on a Windows machine.
58 This client will also run on 64 bit Windows machines, but
59 VSS support is not available if you are running a 64 bit
60 version of Windows. This installer installs only the FD,
61 the Director and Storage daemon are not included.
64 \item [win64bacula-5.0.0.exe]
65 This file is the 64 bit Windows installer for installing
66 the Windows client (File daemon) on a Windows machine.
67 This client will only run on 64 bit Windows OS machines.
68 It will not run on 32 bit machines or 32 bit Windows OSes.
69 The win64bacula release is necessary for Volume Shadow
70 Copy (VSS) to work on Win64 OSes. This installer
71 installs only the FD, the Director and Storage daemon
77 \section{Upgrading Bacula}
78 \index[general]{Bacula!Upgrading}
79 \index[general]{Upgrading Bacula}
80 \index[general]{Upgrading}
82 If you are upgrading from one Bacula version to another, you should first
83 carefully read the ReleaseNotes of all major versions between your current
84 version and the version to which you are upgrading. In many upgrades,
85 especially for minor patch upgrades (e.g. between 3.0.0 and 3.0.1) there
86 will be no database upgrade, and hence the process is rather simple.
88 With version 3.0.0 and later, you {\bf must} ensure that on any one
89 machine that all components of Bacula are running on exactly the
90 same version. Prior to version 3.0.0, it was possible to run a
91 lower level FD with a newer Director and SD. This is no longer the
94 As always, we attempt to support older File daemons. This avoids the
95 need to do a simultaneous upgrade of many machines. For exactly what
96 older versions of the FD are supported, please see the ReleaseNotes
97 for the new version. In any case, you must always upgrade both the
98 Director and the Storage daemon at the same time, and you must also
99 upgrade any File daemon that is running on the same machine as a Director
100 or a Storage daemon (see the prior paragraph).
102 If the Bacula catalog
103 database has been upgraded (as it is almost every major release), you will
104 either need to reinitialize your database starting from scratch (not
105 normally a good idea), or save an ASCII copy of your database, then proceed
106 to upgrade it. If you are upgrading two major versions (e.g. 1.36 to 2.0)
107 then life will be more complicated because you must do two database
108 upgrades. See below for more on this.
110 Upgrading the catalog is normally done after Bacula is build and installed
114 cd <installed-scripts-dir> (default /etc/bacula)
115 ./update_bacula_tables
118 This update script can also be find in the Bacula source src/cats
121 If there are several database upgrades between your version and the
122 version to which you are upgrading, you will need to apply each database
123 upgrade script. For your convenience, you can find all the old upgrade scripts
124 in the {\bf upgradedb} directory of the source code. You will need to edit the
125 scripts to correspond to your system configuration. The final upgrade script,
126 if any, can be applied as noted above.
128 If you are upgrading from one major version to another, you will need to
129 replace all your components at the same time as generally the inter-daemon
130 protocol will change. However, within any particular release (e.g. version
131 1.32.x) unless there is an oversight or bug, the daemon protocol will not
132 change. If this is confusing, simply read the ReleaseNotes very carefully as
133 they will note if all daemons must be upgraded at the same time.
135 Finally, please note that in general it is not necessary or desirable
136 to do a {\bf make uninstall} before doing an upgrade providing you are careful
137 not to change the installation directories. In fact, if you do so, you will
138 most likely delete all your conf files, which could be disastrous.
139 The normal procedure during an upgrade is simply:
142 ./configure (your options)
147 In general none of your existing .conf or .sql files will be overwritten,
148 and you must do both the {\bf make} and {\bf make install} commands, a
149 {\bf make install} without the preceding {\bf make} will not work.
151 For additional information on upgrading, please see the \ilink{Upgrading Bacula
152 Versions}{upgrading} in the Tips chapter of this manual.
154 \section{Releases Numbering}
155 \index[general]{Release Numbering}
156 \index[general]{Version Numbering}
157 Every Bacula release whether beta or production has a different number
158 as well as the date of the release build. The numbering system follows
159 traditional Open Source conventions in that it is of the form.
170 where each component (major, minor, patch) is a number.
171 The major number is currently 1 and normally does not change
172 very frequently. The minor number starts at 0 and increases
173 each for each production release by 2 (i.e. it is always an
174 even number for a production release), and the patch number is
175 starts at zero each time the minor number changes. The patch
176 number is increased each time a bug fix (or fixes) is released
179 So, as of this date (10 September 2006), the current production Bacula
180 release is version 1.38.11. If there are bug fixes, the next release
181 will be 1.38.12 (i.e. the patch number has increased by one).
183 For all patch releases where the minor version number does not change,
184 the database and all the daemons will be compatible. That means that
185 you can safely run a 1.38.0 Director with a 1.38.11 Client. Of course,
186 in this case, the Director may have bugs that are not fixed. Generally,
187 within a minor release (some minor releases are not so minor), all
188 patch numbers are officially released to production. This means that while
189 the current Bacula version is 1.38.11, versions 1.38.0, 1.38.1, ... 1.38.10
190 have all been previously released.
192 When the minor number is odd, it indicates that the package is under
193 development and thus may not be stable. For example, while the current
194 production release of Bacula is currently 1.38.11, the current development
195 version is 1.39.22. All patch versions of the development code are
196 available in the SVN (source repository). However, not all patch versions
197 of the development code (odd minor version) are officially released. When
198 they are released, they are released as beta versions (see below for a
199 definition of what beta means for Bacula releases).
201 In general when the minor number increases from one production release
202 to the next (i.e. 1.38.x to 1.40.0), the catalog database must be upgraded,
203 the Director and Storage daemon must always be on the same minor release
204 number, and often (not always), the Clients must also be on the same minor
205 release. As often as possible, we attempt to make new releases that are
206 downwards compatible with prior clients, but this is not always possible.
207 You must check the release notes. In general, you will have fewer problems
208 if you always run all the components on the same minor version number (i.e.
209 all either 1.38.x or 1.40.x but not mixed).
213 \section*{Beta Releases}
214 \index[general]{Beta Releases}
215 Towards the end of the development cycle, which typically runs
216 one year from a major release to another, there will be several beta
217 releases of the development code prior to a production release.
218 As noted above, beta versions always have odd minor version numbers
219 (e.g 1.37.x or 1.39.x).
220 The purpose of the beta releases is to allow early adopter users to test
221 the new code. Beta releases are made with the following considerations:
224 \item The code passes the regression testing on FreeBSD, Linux, and Solaris
227 \item There are no known major bugs, or on the rare occasion that
228 there are, they will be documented or already in the bugs database.
230 \item Some of the new code/features may not yet be tested.
232 \item Bugs are expected to be found, especially in the new
233 code before the final production release.
235 \item The code will have been run in production in at least one small
238 \item The Win32 client will have been run in production at least
239 one night at that small site.
241 \item The documentation in the manual is unlikely to be complete especially
242 for the new features, and the Release Notes may not be fully
245 \item Beta code is not generally recommended for everyone, but
246 rather for early adopters.
251 \section{Dependency Packages}
252 \index[general]{Dependency Packages}
253 \index[general]{Packages!Dependency}
255 As discussed above, we have combined a number of third party packages that
256 Bacula might need into the {\bf depkgs} release. You can,
257 of course, get the latest packages from the original authors or
258 from your operating system supplier. The locations of
259 where we obtained the packages are in the README file in each package.
260 However, be aware that the packages in the depkgs files have been tested by us
261 for compatibility with Bacula.
263 Typically, a dependency package will be named {\bf depkgs-ddMMMyy.tar.gz}
264 where {\bf dd} is the day we release it, {\bf MMM}
265 is the abbreviated month (e.g. Jan), and {\bf yy} is the year. An actual
266 example is: {\bf depkgs-18Dec.tar.gz}. To install and build this package (if
267 needed), you do the following:
270 \item Create a {\bf bacula} directory, into which you will place both the
271 Bacula source as well as the dependency package.
272 \item Detar the {\bf depkgs} into the {\bf bacula} directory.
273 \item cd bacula/depkgs
277 Although the exact composition of the dependency packages may change from time
278 to time, the current makeup is the following:
280 \addcontentsline{lot}{table}{Dependency Packages}
281 \begin{longtable}{|l|l|l|}
283 \multicolumn{1}{|c| }{\bf 3rd Party Package} & \multicolumn{1}{c| }{\bf depkgs}
284 & \multicolumn{1}{c| }{\bf depkgs-qt} \\
285 \hline {SQLite3 } & \multicolumn{1}{c| }{X } & \multicolumn{1}{c| }{ }\\
286 \hline {mtx } & \multicolumn{1}{c| }{X } & \multicolumn{1}{c| }{ } \\
287 \hline {qt4 } & \multicolumn{1}{c| }{ } & \multicolumn{1}{c| }{X } \\
291 Note, some of these packages are quite large, so that building them can be a
292 bit time consuming. The above instructions will build all the packages
293 contained in the directory. However, when building Bacula, it will take only
294 those pieces that it actually needs.
296 Alternatively, you can make just the packages that are needed. For example,
305 will configure and build only the SQLite package.
307 You should build the packages that you will require in {\bf depkgs} a
308 prior to configuring and building Bacula, since Bacula will need
309 them during the build process.
311 Note, the {\bf depkgs-qt} package is required for building bat, because
312 bat is currently built with Qt version 4.3.4. It can be built with other
313 Qt versions, but that almost always creates problems or introduces
316 You can build the depkgs-qt with the following:
321 tar xfvz depkgs-qt-28Jul09.tar.gz
328 Doing the {\bf source qt4-path} defines the following environment
339 Each one should point to a specific location in the depkgs-qt package
340 that you loaded. It also puts the depkgs-qt/qt4/bin directory
341 on your path before all other directories. This ensures that
342 the bat build will use your Qt 4.3.4 library rather than any that
343 might be on your system.
345 Before running your Bacula build, please make sure that
346 {\bf qmake-qt4} is not on your path. If it is please rename it. If
347 you don't do this, Bacula will attempt to build with any Qt4 package
348 installed on your system rather than the one you just built.
349 If you logoff and log back in, you must re-source the depkgs-qt/qt4-patch
350 file before attempting to rebuild the bat part of Bacula.
352 For more information on the {\bf depkgs-qt} package, please read the
353 INSTALL file in the main directory of that package. If you are going to
354 build Qt4 using {\bf depkgs-qt}, you must source the {\bf qt4-paths} file
355 included in the package prior to building Bacula. Please read the INSTALL
356 file for more details.
358 Even if you do not use SQLite, you might find it worthwhile to build {\bf mtx}
359 because the {\bf tapeinfo} program that comes with it can often provide you
360 with valuable information about your SCSI tape drive (e.g. compression,
361 min/max block sizes, ...). Note, most distros provide {\bf mtx} as part of
364 The {\bf depkgs1} package is depreciated and previously contained
365 readline, which should be available on all operating systems.
367 The {\bf depkgs-win32} package is deprecated and no longer used in
368 Bacula version 1.39.x and later. It was previously used to build
369 the native Win32 client program, but this program is now built on Linux
370 systems using cross-compiling. All the tools and third party libraries
371 are automatically downloaded by executing the appropriate scripts. See
372 src/win32/README.mingw32 for more details.
374 \section{Supported Operating Systems}
376 \index[general]{Systems!Supported Operating}
377 \index[general]{Supported Operating Systems}
380 \ilink{ Supported Operating Systems}{SupportedOSes} section
381 of the QuickStart chapter of this manual.
383 \section{Building Bacula from Source}
385 \index[general]{Source!Building Bacula from}
386 \index[general]{Building Bacula from Source}
388 The basic installation is rather simple.
391 \item Install and build any {\bf depkgs} as noted above. This
392 should be unnecessary on most modern Operating Systems.
394 \item Configure and install MySQL or PostgreSQL (if desired).
395 \ilink{Installing and Configuring MySQL Phase I}{MySqlChapter} or
396 \ilink{Installing and Configuring PostgreSQL Phase
397 I}{PostgreSqlChapter}. If you are installing from rpms, and are
398 using MySQL, please be sure to install {\bf mysql-devel}, so that the MySQL
399 header files are available while compiling Bacula. In addition, the MySQL
400 client library {\bf mysqlclient} requires the gzip compression library {\bf
401 libz.a} or {\bf libz.so}. If you are using rpm packages, these libraries are
402 in the {\bf libz-devel} package. On Debian systems, you will need to load the
403 {\bf zlib1g-dev} package. If you are not using rpms or debs, you will need to
404 find the appropriate package for your system.
406 Note, if you already have a running MySQL or PostgreSQL on your system, you
407 can skip this phase provided that you have built the thread safe libraries.
408 And you have already installed the additional rpms noted above.
410 SQLite is not supported on Solaris. This is because it
411 frequently fails with bus errors. However SQLite3 may work.
413 \item Detar the Bacula source code preferably into the {\bf bacula} directory
416 \item {\bf cd} to the directory containing the source code.
418 \item ./configure (with appropriate options as described below). Any
419 path names you specify as options on the ./configure command line
420 must be absolute paths and not relative.
422 \item Check the output of ./configure very carefully, especially the Install
423 binaries and Install config directories. If they are not correct,
424 please rerun ./configure until they are. The output from ./configure is
425 stored in {\bf config.out} and can be re-displayed at any time without
426 rerunning the ./configure by doing {\bf cat config.out}.
428 \item If after running ./configure once, you decide to change options and
429 re-run it, that is perfectly fine, but before re-running it, you should run:
437 so that you are sure to start from scratch and not have a mixture of the two
438 options. This is because ./configure caches much of the information. The {\bf
439 make distclean} is also critical if you move the source directory from one
440 machine to another. If the {\bf make distclean} fails, just ignore it and
444 If you get errors while linking in the Storage daemon directory
445 (src/stored), it is probably because you have not loaded the static
446 libraries on your system. I noticed this problem on a Solaris system.
447 To correct it, make sure that you have not added {\bf
448 {-} {-}enable-static-tools} to the {\bf ./configure} command.
450 If you skip this step ({\bf make}) and proceed immediately to the {\bf
451 make install} you are making two serious errors: 1. your install will
452 fail because Bacula requires a {\bf make} before a {\bf make install}.
453 2. you are depriving yourself of the chance to make sure there are no
454 errors before beginning to write files to your system directories.
458 Please be sure you have done a {\bf make} before entering this command,
459 and that everything has properly compiled and linked without errors.
462 \item If you are new to Bacula, we {\bf strongly} recommend that you skip
463 the next step and use the default configuration files, then run the
464 example program in the next chapter, then come back and modify your
465 configuration files to suit your particular needs.
467 \item Customize the configuration files for each of the three daemons
468 (Directory, File, Storage) and for the Console program. For the details
469 of how to do this, please see \ilink{Setting Up Bacula Configuration
470 Files}{ConfigureChapter} in the Configuration chapter of this manual. We
471 recommend that you start by modifying the default configuration files
472 supplied, making the minimum changes necessary. Complete customization
473 can be done after you have Bacula up and running. Please take care when
474 modifying passwords, which were randomly generated, and the {\bf Name}s
475 as the passwords and names must agree between the configuration files
476 for security reasons.
478 \label{CreateDatabase}
479 \item Create the Bacula MySQL database and tables
481 \ilink{Installing and Configuring MySQL Phase II}{mysql_phase2} or
482 create the Bacula PostgreSQL database and tables
483 \ilink{Configuring PostgreSQL
484 II}{PostgreSQL_configure} or alternatively if you are using
485 SQLite \ilink{Installing and Configuring SQLite Phase II}{phase2}.
487 \item Start Bacula ({\bf ./bacula start}) Note. the next chapter shows you
488 how to do this in detail.
490 \item Interface with Bacula using the Console program
492 \item For the previous two items, please follow the instructions in the
493 \ilink{Running Bacula}{TutorialChapter} chapter of this manual,
494 where you will run a simple backup and do a restore. Do this before you make
495 heavy modifications to the configuration files so that you are sure that
496 Bacula works and are familiar with it. After that changing the conf files
499 \item If after installing Bacula, you decide to "move it", that is to
500 install it in a different set of directories, proceed as follows:
506 ./configure (your-new-options)
515 If all goes well, the {\bf ./configure} will correctly determine which
516 operating system you are running and configure the source code appropriately.
517 Currently, FreeBSD, Linux (Red Hat), and Solaris are supported. The Bacula
518 client (File daemon) is reported to work with MacOS X 10.3 is if
519 readline support is not enabled (default) when building the client.
521 If you install Bacula on more than one system, and they are identical, you can
522 simply transfer the source tree to that other system and do a "make
523 install". However, if there are differences in the libraries or OS versions,
524 or you wish to install on a different OS, you should start from the original
525 compress tar file. If you do transfer the source tree, and you have previously
526 done a ./configure command, you MUST do:
534 prior to doing your new ./configure. This is because the GNU autoconf tools
535 cache the configuration, and if you re-use a configuration for a Linux machine
536 on a Solaris, you can be sure your build will fail. To avoid this, as
537 mentioned above, either start from the tar file, or do a "make distclean".
539 In general, you will probably want to supply a more complicated {\bf
540 configure} statement to ensure that the modules you want are built and that
541 everything is placed into the correct directories.
543 For example, on Fedora, Red Hat, or SuSE one could use the following:
549 --sbindir=$HOME/bacula/bin \
550 --sysconfdir=$HOME/bacula/bin \
551 --with-pid-dir=$HOME/bacula/bin/working \
552 --with-subsys-dir=$HOME/bacula/bin/working \
554 --with-working-dir=$HOME/bacula/bin/working \
555 --with-dump-email=$USER
559 The advantage of using the above configuration to start is that
560 everything will be put into a single directory, which you can later delete
561 once you have run the examples in the next chapter and learned how Bacula
562 works. In addition, the above can be installed and run as non-root.
564 For the developer's convenience, I have added a {\bf defaultconfig} script to
565 the {\bf examples} directory. This script contains the statements that you
566 would normally use, and each developer/user may modify them to suit his needs.
567 You should find additional useful examples in this directory as well.
569 The {\bf \verb:--:enable-conio} or {\bf \verb:--:enable-readline} options are
570 useful because they provide a command line history, editing capability for the
571 Console program and tab completion on various option. If you have included
572 either option in the build, either the {\bf termcap} or the {\bf ncurses}
573 package will be needed to link. On most systems, including Red Hat and SuSE,
574 you should include the ncurses package. If Bacula's configure process finds
575 the ncurses libraries, it will use those rather than the termcap library. On
576 some systems, such as SuSE, the termcap library is not in the standard library
577 directory. As a consequence, the option may be disabled or you may get an
578 error message such as:
582 /usr/lib/gcc-lib/i586-suse-linux/3.3.1/.../ld:
583 cannot find -ltermcap
584 collect2: ld returned 1 exit status
588 while building the Bacula Console. In that case, you will need to set the {\bf
589 LDFLAGS} environment variable prior to building.
593 export LDFLAGS="-L/usr/lib/termcap"
597 The same library requirements apply if you wish to use the readline subroutines
598 for command line editing, history and tab completion or if you are using a
599 MySQL library that requires encryption. If you need encryption, you can either
600 export the appropriate additional library options as shown above or,
601 alternatively, you can include them directly on the ./configure line as in:
605 LDFLAGS="-lssl -lcyrpto" \
606 ./configure <your-options>
610 On some systems such as Mandriva, readline tends to
611 gobble up prompts, which makes it totally useless. If this happens to you, use
612 the disable option, or if you are using version 1.33 and above try using {\bf
613 \verb:--:enable-conio} to use a built-in readline replacement. You will still need
614 either the termcap or the ncurses library, but it is unlikely that the {\bf conio}
615 package will gobble up prompts.
617 readline is no longer supported after version 1.34. The code within Bacula
618 remains, so it should be usable, and if users submit patches for it, we will
619 be happy to apply them. However, due to the fact that each version of
620 readline seems to be incompatible with previous versions, and that there
621 are significant differences between systems, we can no longer afford to
624 \section{What Database to Use?}
626 \index[general]{What Database to Use?}
627 \index[general]{Use!What Database to}
629 Before building Bacula you need to decide if you want to use SQLite, MySQL, or
630 PostgreSQL. If you are not already running MySQL or PostgreSQL, you might
631 want to start by testing with SQLite (not supported on Solaris).
632 This will greatly simplify the setup for you
633 because SQLite is compiled into Bacula an requires no administration. It
634 performs well and is suitable for small to medium sized installations (maximum
635 10-20 machines). However, we should note that a number of users have
636 had unexplained database corruption with SQLite. For that reason, we
637 recommend that you install either MySQL or PostgreSQL for production
640 If you wish to use MySQL as the Bacula catalog, please see the
641 \ilink{Installing and Configuring MySQL}{MySqlChapter} chapter of
642 this manual. You will need to install MySQL prior to continuing with the
643 configuration of Bacula. MySQL is a high quality database that is very
644 efficient and is suitable for any sized installation. It is slightly more
645 complicated than SQLite to setup and administer because it has a number of
646 sophisticated features such as userids and passwords. It runs as a separate
647 process, is truly professional and can manage a database of any size.
649 If you wish to use PostgreSQL as the Bacula catalog, please see the
650 \ilink{Installing and Configuring PostgreSQL}{PostgreSqlChapter}
651 chapter of this manual. You will need to install PostgreSQL prior to
652 continuing with the configuration of Bacula. PostgreSQL is very similar to
653 MySQL, though it tends to be slightly more SQL92 compliant and has many more
654 advanced features such as transactions, stored procedures, and the such. It
655 requires a certain knowledge to install and maintain.
657 If you wish to use SQLite as the Bacula catalog, please see
658 \ilink{Installing and Configuring SQLite}{SqlLiteChapter} chapter of
659 this manual. SQLite is not supported on Solaris.
661 \section{Quick Start}
662 \index[general]{Quick Start}
663 \index[general]{Start!Quick}
665 There are a number of options and important considerations given below
666 that you can skip for the moment if you have not had any problems building
667 Bacula with a simplified configuration as shown above.
669 If the ./configure process is unable to find specific libraries (e.g.
670 libintl, you should ensure that the appropriate package is installed on
671 your system. Alternatively, if the package is installed in a non-standard
672 location (as far as Bacula is concerned), then there is generally an
673 option listed below (or listed with "./configure {-} {-}help" that will
674 permit you to specify the directory that should be searched. In other
675 cases, there are options that will permit you to disable to feature
676 (e.g. {-} {-}disable-nls).
678 If you want to dive right into it, we recommend you skip to the next chapter,
679 and run the example program. It will teach you a lot about Bacula and as an
680 example can be installed into a single directory (for easy removal) and run as
681 non-root. If you have any problems or when you want to do a real installation,
682 come back to this chapter and read the details presented below.
684 \section{Configure Options}
686 \index[general]{Options!Configure}
687 \index[general]{Configure Options}
689 The following command line options are available for {\bf configure} to
690 customize your installation.
693 \item [ \--prefix=\lt{}patch\gt{}]
694 \index[general]{{-}prefix}
695 This option is meant to allow you to direct where the architecture
696 independent files should be placed. However, we find this a somewhat
697 vague concept, and so we have not implemented this option other than
698 what ./configure does by default. As a consequence, we suggest that
699 you avoid it. We have provided options that allow you to explicitly
700 specify the directories for each of the major categories of installation
702 \item [ {-}{\-}sbindir=\lt{}binary-path\gt{}]
703 \index[general]{{-}{\-}sbindir}
704 Defines where the Bacula binary (executable) files will be placed during a
705 {\bf make install} command.
707 \item [ {-}{\-}sysconfdir=\lt{}config-path\gt{}]
708 \index[general]{{-}{\-}sysconfdir}
709 Defines where the Bacula configuration files should be placed during a
710 {\bf make install} command.
712 \item [ {-}{\-}mandir=\lt{}path\gt{}]
713 \index[general]{{-}{\-}mandir}
714 Note, as of Bacula version 1.39.14, the meaning of any path
715 specified on this option is change from prior versions. It
716 now specifies the top level man directory.
717 Previously the mandir specified the full path to where you
718 wanted the man files installed.
719 The man files will be installed in gzip'ed format under
720 mandir/man1 and mandir/man8 as appropriate.
721 For the install to succeed you must have {\bf gzip} installed
724 By default, Bacula will install the Unix man pages in
725 /usr/share/man/man1 and /usr/share/man/man8.
726 If you wish the man page to be installed in
727 a different location, use this option to specify the path.
728 Note, the main HTML and PDF Bacula documents are in a separate
729 tar file that is not part of the source distribution.
731 \item [ {-}{\-}datadir=\lt{}path\gt{} ]
732 \index[general]{{-}{\-}datadir}
733 If you translate Bacula or parts of Bacula into a different language
734 you may specify the location of the po files using the {\bf
735 {-}{\-}datadir} option. You must manually install any po files as
736 Bacula does not (yet) automatically do so.
738 \item [ {-}{\-}disable-ipv6 ]
739 \index[general]{{-}{\-}disable-ipv6}
741 \item [ {-}{\-}enable-smartalloc ]
742 \index[general]{{-}{\-}enable-smartalloc}
743 This enables the inclusion of the Smartalloc orphaned buffer detection
744 code. This option is highly recommended. Because we never build
745 without this option, you may experience problems if it is not enabled.
746 In this case, simply re-enable the option. We strongly recommend
747 keeping this option enabled as it helps detect memory leaks. This
748 configuration parameter is used while building Bacula
750 \item [ {-}{\-}enable-bat ]
752 \index[general]{{-}{\-}enable-bat}
753 If you have Qt4 >= 4.3.4 installed on your computer including the
754 libqt4 and libqt4-devel (libqt4-dev on Debian) libraries, and you want
755 to use the Bacula Administration Tool (bat) GUI Console interface to
756 Bacula, you must specify this option. Doing so will build everything in
757 the {\bf src/qt-console} directory. The build with enable-bat will work
758 only with a full Bacula build (i.e. it will not work with a client-only
761 Qt4 is available on OpenSUSE 10.2, CentOS 5, Fedora, and Debian. If it
762 is not available on your system, you can download the {\bf depkgs-qt}
763 package from the Bacula Source Forge download area and build it.
765 INSTALL file in that package for more details. In particular to use
766 the Qt4 built by {\bf depkgs-qt} you {\bf must} source the file
769 \item [ {-}{\-}enable-batch-insert ]
770 \index[general]{{-}{\-}enable-batch-insert}
771 This option enables batch inserts of the attribute records (default) in
772 the catalog database, which is much faster (10 times or more) than
773 without this option for large numbers of files. However, this option
774 will automatically be disabled if your SQL libraries are not
775 thread safe. If you find that batch mode is not enabled on your Bacula
776 installation, then your database most likely does not support threads.
778 SQLite2 is not thread safe. Batch insert cannot be enabled when using
781 On most systems, MySQL, PostgreSQL and SQLite3 are thread safe.
783 To verify that your PostgreSQL is thread safe, you can try this
784 (change the path to point to your particular installed libpq.a;
785 these commands were issued on FreeBSD 6.2):
788 $ nm /usr/local/lib/libpq.a | grep PQputCopyData
789 00001b08 T PQputCopyData
790 $ nm /usr/local/lib/libpq.a | grep mutex
792 U pthread_mutex_unlock
795 U pthread_mutex_unlock
798 The above example shows a libpq that contains the required function
799 PQputCopyData and is thread enabled (i.e. the pthread\_mutex* entries).
800 If you do not see PQputCopyData, your version of PostgreSQL is too old
801 to allow batch insert. If you do not see the mutex entries, then thread
802 support has not been enabled. Our tests indicate you usually need to
803 change the configuration options and recompile/reinstall the PostgreSQL
804 client software to get thread support.
806 Bacula always links to the thread safe MySQL libraries.
808 Running with Batch Insert turned on is recommended because it can
809 significantly improve attribute insertion times. However, it does
810 put a significantly larger part of the work on your SQL engine, so
811 you may need to pay more attention to tuning it. In particular,
812 Batch Insert can require large temporary table space, and consequently,
813 the default location (often /tmp) may run out of space causing errors.
814 For MySQL, the location is set in my.conf with "tmpdir". You may also
815 want to increase the memory available to your SQL engine to further
816 improve performance during Batch Inserts.
818 \item [ {-}{\-}enable-bwx-console ]
819 \index[general]{{-}{\-}enable-bwx-console}
820 If you have wxWidgets installed on your computer and you want to use the
821 wxWidgets GUI Console interface to Bacula, you must specify this option.
822 Doing so will build everything in the {\bf src/wx-console} directory.
823 This could also be useful to users who want a GUI Console and don't want
824 to install QT, as wxWidgets can work with GTK+, Motif or even X11
827 \item [ {-}{\-}enable-tray-monitor ]
828 \index[general]{{-}{\-}enable-tray-monitor}
829 If you have GTK installed on your computer, you run a graphical
830 environment or a window manager compatible with the FreeDesktop system
831 tray standard (like KDE and GNOME) and you want to use a GUI to monitor
832 Bacula daemons, you must specify this option. Doing so will build
833 everything in the {\bf src/tray-monitor} directory. Note, due to
834 restrictions on what can be linked with GPLed code, we were forced to
835 remove the egg code that dealt with the tray icons and replace it by
836 calls to the GTK+ API, and unfortunately, the tray icon API necessary
837 was not implemented until GTK version 2.10 or later.
839 \item [ {-}{\-}enable-static-tools]
840 \index[general]{{-}{\-}enable-static-tools}
841 This option causes the linker to link the Storage daemon utility tools
842 ({\bf bls}, {\bf bextract}, and {\bf bscan}) statically. This permits
843 using them without having the shared libraries loaded. If you have
844 problems linking in the {\bf src/stored} directory, make sure you have
845 not enabled this option, or explicitly disable static linking by adding
846 {\bf \verb:--:disable-static-tools}.
848 \item [ {-}{\-}enable-static-fd]
849 \index[general]{{-}{\-}enable-static-fd}
850 This option causes the make process to build a {\bf static-bacula-fd} in
851 addition to the standard File daemon. This static version will include
852 statically linked libraries and is required for the Bare Metal recovery.
853 This option is largely superseded by using {\bf make static-bacula-fd}
854 from with in the {\bf src/filed} directory. Also, the {\bf
855 \verb:--:enable-client-only} option described below is useful for just
856 building a client so that all the other parts of the program are not
859 When linking a static binary, the linker needs the static versions
860 of all the libraries that are used, so frequently users will
861 experience linking errors when this option is used. The first
862 thing to do is to make sure you have the static glibc library
863 installed on your system. The second thing to do is the make sure
864 you do not specify {\bf {-}{\-}openssl} or {\bf {-}{\-}with-python}
865 on your ./configure statement as these options require additional
866 libraries. You may be able to enable those options, but you will
867 need to load additional static libraries.
870 \item [ {-}{\-}enable-static-sd]
871 \index[general]{{-}{\-}enable-static-sd}
872 This option causes the make process to build a {\bf static-bacula-sd} in
873 addition to the standard Storage daemon. This static version will
874 include statically linked libraries and could be useful during a Bare
877 When linking a static binary, the linker needs the static versions
878 of all the libraries that are used, so frequently users will
879 experience linking errors when this option is used. The first
880 thing to do is to make sure you have the static glibc library
881 installed on your system. The second thing to do is the make sure
882 you do not specify {\bf {-}{\-}openssl} or {\bf {-}{\-}with-python}
883 on your ./configure statement as these options require additional
884 libraries. You may be able to enable those options, but you will
885 need to load additional static libraries.
888 \item [ {-}{\-}enable-static-dir]
889 \index[general]{{-}{\-}enable-static-dir}
890 This option causes the make process to build a {\bf static-bacula-dir}
891 in addition to the standard Director. This static version will include
892 statically linked libraries and could be useful during a Bare Metal
895 When linking a static binary, the linker needs the static versions
896 of all the libraries that are used, so frequently users will
897 experience linking errors when this option is used. The first
898 thing to do is to make sure you have the static glibc library
899 installed on your system. The second thing to do is the make sure
900 you do not specify {\bf {-}{\-}openssl} or {\bf {-}{\-}with-python}
901 on your ./configure statement as these options require additional
902 libraries. You may be able to enable those options, but you will
903 need to load additional static libraries.
906 \item [ {-}{\-}enable-static-cons]
907 \index[general]{{-}{\-}enable-static-cons}
908 This option causes the make process to build a {\bf static-console} in
909 addition to the standard console. This static version will include
910 statically linked libraries and could be useful during a Bare Metal
913 When linking a static binary, the linker needs the static versions
914 of all the libraries that are used, so frequently users will
915 experience linking errors when this option is used. The first
916 thing to do is to make sure you have the static glibc library
917 installed on your system. The second thing to do is the make sure
918 you do not specify {\bf {-}{\-}openssl} or {\bf {-}{\-}with-python}
919 on your ./configure statement as these options require additional
920 libraries. You may be able to enable those options, but you will
921 need to load additional static libraries.
924 \item [ {-}{\-}enable-client-only]
925 \index[general]{{-}{\-}enable-client-only}
926 This option causes the make process to build only the File daemon and
927 the libraries that it needs. None of the other daemons, storage tools,
928 nor the console will be built. Likewise a {\bf make install} will then
929 only install the File daemon. To cause all daemons to be built, you
930 will need to do a configuration without this option. This option
931 greatly facilitates building a Client on a client only machine.
933 When linking a static binary, the linker needs the static versions
934 of all the libraries that are used, so frequently users will
935 experience linking errors when this option is used. The first
936 thing to do is to make sure you have the static glibc library
937 installed on your system. The second thing to do is the make sure
938 you do not specify {\bf {-}{\-}openssl} or {\bf {-}{\-}with-python}
939 on your ./configure statement as these options require additional
940 libraries. You may be able to enable those options, but you will
941 need to load additional static libraries.
943 \item [ {-}{\-}enable-build-dird]
944 \index[general]{{-}{\-}enable-build-dird}
945 This option causes the make process to build the Director and the
946 Director's tools. By default, this option is on, but you may turn
947 it off by using {\bf {-}{\-}disable-build-dird} to prevent the
948 Director from being built.
950 \item [ {-}{\-}enable-build-stored]
951 \index[general]{{-}{\-}enable-build-stored}
952 This option causes the make process to build the Storage daemon.
953 By default, this option is on, but you may turn
954 it off by using {\bf {-}{\-}disable-build-stored} to prevent the
955 Storage daemon from being built.
958 \item [ {-}{\-}enable-largefile]
959 \index[general]{{-}{\-}enable-largefile}
960 This option (default) causes Bacula to be built with 64 bit file address
961 support if it is available on your system. This permits Bacula to read and
962 write files greater than 2 GBytes in size. You may disable this feature and
963 revert to 32 bit file addresses by using {\bf \verb:--:disable-largefile}.
965 \item [ {-}{\-}disable-nls]
966 \index[general]{{-}{\-}disable-nls}
967 By default, Bacula uses the GNU Native Language Support (NLS) libraries. On
968 some machines, these libraries may not be present or may not function
969 correctly (especially on non-Linux implementations). In such cases, you
970 may specify {\bf {-}{\-}disable-nls} to disable use of those libraries.
971 In such a case, Bacula will revert to using English.
973 \item [ {-}{\-}disable-ipv6 ]
974 \index[general]{{-}{\-}disable-ipv6}
975 By default, Bacula enables IPv6 protocol. On some systems, the files
976 for IPv6 may exist, but the functionality could be turned off in the
977 kernel. In that case, in order to correctly build Bacula, you will
978 explicitly need to use this option so that Bacula does not attempt
979 to reference OS function calls that do not exist.
981 \item [ {-}{\-}with-sqlite3=\lt{}sqlite3-path\gt{}]
982 \index[general]{{-}{\-}with-sqlite3}
983 This enables use of the SQLite version 3.x database. The {\bf
984 sqlite3-path} is not normally specified as Bacula looks for the
985 necessary components in a standard location ({\bf depkgs/sqlite3}). See
986 \ilink{Installing and Configuring SQLite}{SqlLiteChapter} chapter of
987 this manual for more details. SQLite3 is not supported on Solaris.
989 \item [ {-}{\-}with-mysql=\lt{}mysql-path\gt{}]
990 \index[general]{{-}{\-}with-mysql}
991 This enables building of the Catalog services for Bacula. It assumes
992 that MySQL is running on your system, and expects it to be installed in
993 the {\bf mysql-path} that you specify. Normally, if MySQL is installed
994 in a standard system location, you can simply use {\bf {-}{\-}with-mysql}
995 with no path specification. If you do use this option, please proceed
996 to installing MySQL in the \ilink{Installing and Configuring
997 MySQL}{MySqlChapter} chapter before proceeding with the configuration.
999 See the note below under the {-}{\-}with-postgresql item.
1001 \item [ {-}{\-}with-postgresql=\lt{}path\gt{}]
1002 \index[general]{{-}{\-}with-postgresql}
1003 This provides an explicit path to the PostgreSQL libraries if Bacula
1004 cannot find it by default. Normally to build with PostgreSQL, you would
1005 simply use {\bf {-}{\-}with-postgresql}.
1007 Note, for Bacula to be configured properly, you must specify one
1008 of the four database options supported. That is:
1009 {-}{\-}with-sqlite, {-}{\-}with-sqlite3, {-}{\-}with-mysql, or
1010 {-}{\-}with-postgresql, otherwise the ./configure will fail.
1012 \item [ {-}{\-}with-openssl=\lt{}path\gt{}]
1013 This configuration option is necessary if you want to enable TLS (ssl),
1014 which encrypts the communications within
1015 Bacula or if you want to use File Daemon PKI data encryption.
1016 Normally, the {\bf path} specification is not necessary since
1017 the configuration searches for the OpenSSL libraries in standard system
1018 locations. Enabling OpenSSL in Bacula permits secure communications
1019 between the daemons and/or data encryption in the File daemon.
1020 For more information on using TLS, please see the
1021 \ilink{Bacula TLS -- Communications Encryption}{CommEncryption} chapter
1023 For more information on using PKI data encryption, please see the
1024 \ilink{Bacula PKI -- Data Encryption}{DataEncryption}
1025 chapter of this manual.
1027 \item [ {-}{\-}with-python=\lt{}path\gt{}]
1028 \index[general]{{-}{\-}with-python}
1029 This option enables Bacula support for Python. If no path is supplied,
1030 configure will search the standard library locations for Python 2.2,
1031 2.3, 2.4, or 2.5. If it cannot find the library, you will need to
1032 supply a path to your Python library directory. Please see the
1033 \ilink{Python chapter}{PythonChapter} for the details of using Python
1036 \item [ {-}{\-}with-libintl-prefix=\lt{}DIR\gt{}]
1037 \index[general]{{-}{\-}with-libintl-prefix}
1038 This option may be used to tell Bacula to search DIR/include and
1039 DIR/lib for the libintl headers and libraries needed for Native
1040 Language Support (NLS).
1042 \item [ {-}{\-}enable-conio]
1043 \index[general]{{-}{\-}enable-conio}
1044 Tells Bacula to enable building the small, light weight readline
1045 replacement routine. It is generally much easier to configure than
1046 readline, although, like readline, it needs either the termcap or
1049 \item [ {-}{\-}with-readline=\lt{}readline-path\gt{}]
1050 \index[general]{{-}{\-}with-readline}
1051 Tells Bacula where {\bf readline} is installed. Normally, Bacula will
1052 find readline if it is in a standard library. If it is not found and no
1053 {-}{\-}with-readline is specified, readline will be disabled. This
1054 option affects the Bacula build. Readline provides the Console program
1055 with a command line history and editing capability and is no longer
1056 supported, so you are on your own if you have problems.
1058 \item [ {-}{\-}enable-readline]
1059 \index[general]{{-}{\-}enable-readline}
1060 Tells Bacula to enable readline support. It is normally disabled due to the
1061 large number of configuration problems and the fact that the package seems to
1062 change in incompatible ways from version to version.
1064 \item [ {-}{\-}with-tcp-wrappers=\lt{}path\gt{}]
1065 \index[general]{{-}{\-}with-tcp-wrappers}
1066 \index[general]{TCP Wrappers}
1067 \index[general]{Wrappers!TCP}
1068 \index[general]{libwrappers}
1069 This specifies that you want TCP wrappers (man hosts\_access(5)) compiled in.
1070 The path is optional since Bacula will normally find the libraries in the
1071 standard locations. This option affects the Bacula build. In specifying your
1072 restrictions in the {\bf /etc/hosts.allow} or {\bf /etc/hosts.deny} files, do
1073 not use the {\bf twist} option (hosts\_options(5)) or the Bacula process will
1074 be terminated. Note, when setting up your {\bf /etc/hosts.allow}
1075 or {\bf /etc/hosts.deny}, you must identify the Bacula daemon in
1076 question with the name you give it in your conf file rather than the
1077 name of the executable.
1079 For more information on configuring and testing TCP wrappers, please see the
1080 \ilink{Configuring and Testing TCP Wrappers}{wrappers} section
1081 in the Security Chapter.
1083 On SuSE, the libwrappers libraries needed to link Bacula are
1084 contained in the tcpd-devel package. On Red Hat, the package is named
1087 \item [ {-}{\-}with-archivedir=\lt{}path\gt{} ]
1088 \index[general]{{-}{\-}with-archivedir}
1089 The directory used for disk-based backups. Default value is /tmp.
1090 This parameter sets the default values in the bacula-dir.conf and bacula-sd.conf
1091 configuration files. For example, it sets the Where directive for the
1092 default restore job and the Archive Device directive for the FileStorage
1095 This option is designed primarily for use in regression testing.
1096 Most users can safely ignore this option.
1098 \item [ {-}{\-}with-working-dir=\lt{}working-directory-path\gt{} ]
1099 \index[general]{{-}{\-}with-working-dir}
1100 This option is mandatory and specifies a directory into which Bacula may
1101 safely place files that will remain between Bacula executions. For example,
1102 if the internal database is used, Bacula will keep those files in this
1103 directory. This option is only used to modify the daemon configuration
1104 files. You may also accomplish the same thing by directly editing them later.
1105 The working directory is not automatically created by the install process, so
1106 you must ensure that it exists before using Bacula for the first time.
1108 \item [ {-}{\-}with-base-port=\lt{}port=number\gt{}]
1109 \index[general]{{-}{\-}with-base-port}
1110 In order to run, Bacula needs three TCP/IP ports (one for the Bacula
1111 Console, one for the Storage daemon, and one for the File daemon). The {\bf
1112 \verb:--:with-baseport} option will automatically assign three ports beginning at
1113 the base port address specified. You may also change the port number in the
1114 resulting configuration files. However, you need to take care that the
1115 numbers correspond correctly in each of the three daemon configuration
1116 files. The default base port is 9101, which assigns ports 9101 through 9103.
1117 These ports (9101, 9102, and 9103) have been officially assigned to Bacula by
1118 IANA. This option is only used to modify the daemon configuration files. You
1119 may also accomplish the same thing by directly editing them later.
1121 \item [ {-}{\-}with-dump-email=\lt{}email-address\gt{}]
1122 \index[general]{{-}{\-}with-dump-email}
1123 This option specifies the email address where any core dumps should be set.
1124 This option is normally only used by developers.
1126 \item [ {-}{\-}with-pid-dir=\lt{}PATH\gt{} ]
1127 \index[general]{{-}{\-}with-pid-dir}
1128 This specifies where Bacula should place the process id file during
1129 execution. The default is: {\bf /var/run}. This directory is not created by
1130 the install process, so you must ensure that it exists before using Bacula
1133 \item [ {-}{\-}with-subsys-dir=\lt{}PATH\gt{}]
1134 \index[general]{{-}{\-}with-subsys-dir}
1135 This specifies where Bacula should place the subsystem lock file during
1136 execution. The default is {\bf /var/run/subsys}. Please make sure that you do
1137 not specify the same directory for this directory and for the {\bf sbindir}
1138 directory. This directory is used only within the autostart scripts. The
1139 subsys directory is not created by the Bacula install, so you must be sure to
1140 create it before using Bacula.
1142 \item [ {-}{\-}with-dir-password=\lt{}Password\gt{}]
1143 \index[general]{{-}{\-}with-dir-password}
1144 This option allows you to specify the password used to access the Director
1145 (normally from the Console program). If it is not specified, configure will
1146 automatically create a random password.
1148 \item [ {-}{\-}with-fd-password=\lt{}Password\gt{} ]
1149 \index[general]{{-}{\-}with-fd-password}
1150 This option allows you to specify the password used to access the File daemon
1151 (normally called from the Director). If it is not specified, configure will
1152 automatically create a random password.
1154 \item [ {-}{\-}with-sd-password=\lt{}Password\gt{} ]
1155 \index[general]{{-}{\-}with-sd-password}
1156 This option allows you to specify the password used to access the Storage daemon
1157 (normally called from the Director). If it is not specified, configure will
1158 automatically create a random password.
1160 \item [ {-}{\-}with-dir-user=\lt{}User\gt{} ]
1161 \index[general]{{-}{\-}with-dir-user}
1162 This option allows you to specify the Userid used to run the Director. The
1163 Director must be started as root, but doesn't need to run as root, and
1164 after doing preliminary initializations, it can "drop" to the UserId
1165 specified on this option.
1166 If you specify this option, you must
1167 create the User prior to running {\bf make install}, because the
1168 working directory owner will be set to {\bf User}.
1170 \item [ {-}{\-}with-dir-group=\lt{}Group\gt{} ]
1171 \index[general]{{-}{\-}with-dir-group}
1172 This option allows you to specify the GroupId used to run the Director. The
1173 Director must be started as root, but doesn't need to run as root, and after
1174 doing preliminary initializations, it can "drop" to the GroupId specified
1176 If you specify this option, you must
1177 create the Group prior to running {\bf make install}, because the
1178 working directory group will be set to {\bf Group}.
1180 \item [ {-}{\-}with-sd-user=\lt{}User\gt{} ]
1181 \index[general]{{-}{\-}with-sd-user}
1182 This option allows you to specify the Userid used to run the Storage daemon.
1183 The Storage daemon must be started as root, but doesn't need to run as root,
1184 and after doing preliminary initializations, it can "drop" to the UserId
1185 specified on this option. If you use this option, you will need to take care
1186 that the Storage daemon has access to all the devices (tape drives, ...) that
1189 \item [ {-}{\-}with-sd-group=\lt{}Group\gt{} ]
1190 \index[general]{{-}{\-}with-sd-group}
1191 This option allows you to specify the GroupId used to run the Storage daemon.
1192 The Storage daemon must be started as root, but doesn't need to run as root,
1193 and after doing preliminary initializations, it can "drop" to the GroupId
1194 specified on this option.
1196 \item [ {-}{\-}with-fd-user=\lt{}User\gt{} ]
1197 \index[general]{{-}{\-}with-fd-user}
1198 This option allows you to specify the Userid used to run the File daemon. The
1199 File daemon must be started as root, and in most cases, it needs to run as
1200 root, so this option is used only in very special cases, after doing
1201 preliminary initializations, it can "drop" to the UserId specified on this
1204 \item [ {-}{\-}with-fd-group=\lt{}Group\gt{} ]
1205 \index[general]{{-}{\-}with-fd-group}
1206 This option allows you to specify the GroupId used to run the File daemon.
1207 The File daemon must be started as root, and in most cases, it must be run as
1208 root, however, after doing preliminary initializations, it can "drop" to
1209 the GroupId specified on this option.
1211 \item [ {-}{\-}with-mon-dir-password=\lt{}Password\gt{}]
1212 \index[general]{{-}{\-}with-mon-dir-password}
1213 This option allows you to specify the password used to access the Directory
1214 from the monitor. If it is not specified, configure will
1215 automatically create a random password.
1217 \item [ {-}{\-}with-mon-fd-password=\lt{}Password\gt{} ]
1218 \index[general]{{-}{\-}with-mon-fd-password}
1219 This option allows you to specify the password used to access the File daemon
1220 from the Monitor. If it is not specified, configure will
1221 automatically create a random password.
1223 \item [ {-}{\-}with-mon-sd-password=\lt{}Password\gt{} ]
1224 \index[general]{{-}{\-}with-mon-sd-password}
1225 This option allows you to specify the password used to access the
1226 Storage daemon from the Monitor. If it is not specified, configure will
1227 automatically create a random password.
1229 \item [ {-}{\-}with-db-name=\lt{}database-name\gt{} ]
1230 \index[general]{{-}{\-}with-db-name}
1231 This option allows you to specify the database name to be used in
1232 the conf files. The default is bacula.
1234 \item [ {-}{\-}with-db-user=\lt{}database-user\gt{} ]
1235 \index[general]{{-}{\-}with-db-user}
1236 This option allows you to specify the database user name to be used in
1237 the conf files. The default is bacula.
1241 Note, many other options are presented when you do a {\bf ./configure
1242 \verb:--:help}, but they are not implemented.
1244 \section{Recommended Options for Most Systems}
1245 \index[general]{Systems!Recommended Options for Most}
1246 \index[general]{Recommended Options for Most Systems}
1248 For most systems, we recommend starting with the following options:
1253 --enable-smartalloc \
1254 --sbindir=$HOME/bacula/bin \
1255 --sysconfdir=$HOME/bacula/bin \
1256 --with-pid-dir=$HOME/bacula/bin/working \
1257 --with-subsys-dir=$HOME/bacula/bin/working \
1258 --with-mysql=$HOME/mysql \
1259 --with-working-dir=$HOME/bacula/working
1263 If you want to install Bacula in an installation directory rather than run it
1264 out of the build directory (as developers will do most of the time), you
1265 should also include the \verb:--:sbindir and \verb:--:sysconfdir options with appropriate
1266 paths. Neither are necessary if you do not use "make install" as is the case
1267 for most development work. The install process will create the sbindir and
1268 sysconfdir if they do not exist, but it will not automatically create the
1269 pid-dir, subsys-dir, or working-dir, so you must ensure that they exist before
1270 running Bacula for the first time.
1273 \index[general]{Red Hat}
1280 CFLAGS="-g -Wall" ./configure \
1281 --sbindir=$HOME/bacula/bin \
1282 --sysconfdir=$HOME/bacula/bin \
1283 --enable-smartalloc \
1284 --with-sqlite=$HOME/bacula/depkgs/sqlite \
1285 --with-working-dir=$HOME/bacula/working \
1286 --with-pid-dir=$HOME/bacula/bin/working \
1287 --with-subsys-dir=$HOME/bacula/bin/working \
1298 CFLAGS="-g -Wall" ./configure \
1299 --sbindir=$HOME/bacula/bin \
1300 --sysconfdir=$HOME/bacula/bin \
1301 --enable-smartalloc \
1302 --with-mysql=$HOME/mysql \
1303 --with-working-dir=$HOME/bacula/working
1304 --with-pid-dir=$HOME/bacula/bin/working \
1305 --with-subsys-dir=$HOME/bacula/bin/working
1310 or finally, a completely traditional Red Hat Linux install:
1314 CFLAGS="-g -Wall" ./configure \
1315 --sbindir=/usr/sbin \
1316 --sysconfdir=/etc/bacula \
1317 --with-scriptdir=/etc/bacula \
1318 --enable-smartalloc \
1321 --with-working-dir=/var/bacula \
1322 --with-pid-dir=/var/run \
1327 Note, Bacula assumes that /var/bacula, /var/run, and /var/lock/subsys exist so
1328 it will not automatically create them during the install process.
1331 \index[general]{Solaris}
1333 To build Bacula from source, you will need the following installed on your
1334 system (they are not by default): libiconv, gcc 3.3.2, stdc++, libgcc (for
1335 stdc++ and gcc\_s libraries), make 3.8 or later.
1337 You will probably also need to: Add /usr/local/bin to PATH and Add
1338 /usr/ccs/bin to PATH for ar.
1340 It is possible to build Bacula on Solaris with the Solaris compiler, but
1341 we recommend using GNU C++ if possible.
1343 A typical configuration command might look like:
1348 CFLAGS="-g" ./configure \
1349 --sbindir=$HOME/bacula/bin \
1350 --sysconfdir=$HOME/bacula/bin \
1351 --with-mysql=$HOME/mysql \
1352 --enable-smartalloc \
1353 --with-pid-dir=$HOME/bacula/bin/working \
1354 --with-subsys-dir=$HOME/bacula/bin/working \
1355 --with-working-dir=$HOME/bacula/working
1359 As mentioned above, the install process will create the sbindir and sysconfdir
1360 if they do not exist, but it will not automatically create the pid-dir,
1361 subsys-dir, or working-dir, so you must ensure that they exist before running
1362 Bacula for the first time.
1364 Note, you may need to install the following packages to build Bacula
1384 PATH=/usr/bin::/usr/ccs/bin:/etc:/usr/openwin/bin:/usr/local/bin:/usr/sfw/bin:/opt/sfw/bin:/usr/ucb:/usr/sbin
1388 If you have installed special software not normally in the Solaris
1389 libraries, such as OpenSSL, or the packages shown above, then you may need
1390 to add {\bf /usr/sfw/lib} to the library search path. Probably the
1391 simplest way to do so is to run:
1395 setenv LDFLAGS "-L/usr/sfw/lib -R/usr/sfw/lib"
1399 Prior to running the ./configure command.
1401 Alternatively, you can set the LD\_LIBARY\_PATH and/or the LD\_RUN\_PATH
1402 environment variables appropriately.
1404 It is also possible to use the {\bf crle} program to set the library
1405 search path. However, this should be used with caution.
1408 \index[general]{FreeBSD}
1411 \elink{The FreeBSD Diary}{http://www.freebsddiary.org/bacula.php} for a
1412 detailed description on how to make Bacula work on your system. In addition,
1413 users of FreeBSD prior to 4.9-STABLE dated Mon Dec 29 15:18:01 2003 UTC who
1414 plan to use tape devices, please see the
1415 \ilink{Tape Testing Chapter}{FreeBSDTapes} of this manual for
1416 {\bf important} information on how to configure your tape drive for
1417 compatibility with Bacula.
1419 If you are using Bacula with MySQL, you should take care to compile MySQL with
1420 FreeBSD native threads rather than LinuxThreads, since Bacula is normally built
1421 with FreeBSD native threads rather than LinuxTreads. Mixing the two will
1425 \index[general]{Win32}
1427 To install the binary Win32 version of the File daemon please see the
1428 \ilink{Win32 Installation Chapter}{Win32Chapter} in this document.
1430 \section{One File Configure Script}
1431 \index[general]{Script!One File Configure}
1432 \index[general]{One Files Configure Script}
1434 The following script could be used if you want to put everything
1442 --sbindir=$HOME/bacula/bin \
1443 --sysconfdir=$HOME/bacula/bin \
1444 --mandir=$HOME/bacula/bin \
1445 --enable-smartalloc \
1447 --enable-bwx-console \
1448 --enable-tray-monitor \
1449 --with-pid-dir=$HOME/bacula/bin/working \
1450 --with-subsys-dir=$HOME/bacula/bin/working \
1452 --with-working-dir=$HOME/bacula/bin/working \
1453 --with-dump-email=$USER@your-site.com \
1454 --with-job-email=$USER@your-site.com \
1455 --with-smtp-host=mail.your-site.com
1460 You may also want to put the following entries in your {\bf /etc/services}
1461 file as it will make viewing the connections made by Bacula easier to
1462 recognize (i.e. netstat -a):
1472 \section{Installing Bacula}
1473 \index[general]{Bacula!Installing}
1474 \index[general]{Installing Bacula}
1476 Before setting up your configuration files, you will want to install Bacula in
1477 its final location. Simply enter:
1485 If you have previously installed Bacula, the old binaries will be overwritten,
1486 but the old configuration files will remain unchanged, and the "new"
1487 configuration files will be appended with a {\bf .new}. Generally if you have
1488 previously installed and run Bacula you will want to discard or ignore the
1489 configuration files with the appended {\bf .new}.
1491 \section{Building a File Daemon or Client}
1492 \index[general]{Client!Building a File Daemon or}
1493 \index[general]{Building a File Daemon or Client}
1495 If you run the Director and the Storage daemon on one machine and you wish to
1496 back up another machine, you must have a copy of the File daemon for that
1497 machine. If the machine and the Operating System are identical, you can simply
1498 copy the Bacula File daemon binary file {\bf bacula-fd} as well as its
1499 configuration file {\bf bacula-fd.conf} then modify the name and password in
1500 the conf file to be unique. Be sure to make corresponding additions to the
1501 Director's configuration file ({\bf bacula-dir.conf}).
1503 If the architecture or the OS level are different, you will need to build a
1504 File daemon on the Client machine. To do so, you can use the same {\bf
1505 ./configure} command as you did for your main program, starting either from a
1506 fresh copy of the source tree, or using {\bf make\ distclean} before the {\bf
1509 Since the File daemon does not access the Catalog database, you can remove
1510 the {\bf \verb:--:with-mysql} or {\bf \verb:--:with-sqlite} options, then
1511 add {\bf \verb:--:enable-client-only}. This will compile only the
1512 necessary libraries and the client programs and thus avoids the necessity
1513 of installing one or another of those database programs to build the File
1514 daemon. With the above option, you simply enter {\bf make} and just the
1515 client will be built.
1518 \section{Auto Starting the Daemons}
1519 \index[general]{Daemons!Auto Starting the}
1520 \index[general]{Auto Starting the Daemons}
1522 If you wish the daemons to be automatically started and stopped when your
1523 system is booted (a good idea), one more step is necessary. First, the
1524 ./configure process must recognize your system -- that is it must be a
1525 supported platform and not {\bf unknown}, then you must install the platform
1526 dependent files by doing:
1531 make install-autostart
1535 Please note, that the auto-start feature is implemented only on systems
1536 that we officially support (currently, FreeBSD, Red Hat/Fedora Linux, and
1537 Solaris), and has only been fully tested on Fedora Linux.
1539 The {\bf make install-autostart} will cause the appropriate startup scripts
1540 to be installed with the necessary symbolic links. On Red Hat/Fedora Linux
1541 systems, these scripts reside in {\bf /etc/rc.d/init.d/bacula-dir} {\bf
1542 /etc/rc.d/init.d/bacula-fd}, and {\bf /etc/rc.d/init.d/bacula-sd}. However
1543 the exact location depends on what operating system you are using.
1545 If you only wish to install the File daemon, you may do so with:
1549 make install-autostart-fd
1553 \section{Other Make Notes}
1554 \index[general]{Notes!Other Make}
1555 \index[general]{Other Make Notes}
1557 To simply build a new executable in any directory, enter:
1565 To clean out all the objects and binaries (including the files named 1, 2, or
1566 3, which are development temporary files), enter:
1574 To really clean out everything for distribution, enter:
1582 note, this cleans out the Makefiles and is normally done from the top level
1583 directory to prepare for distribution of the source. To recover from this
1584 state, you must redo the {\bf ./configure} in the top level directory, since
1585 all the Makefiles will be deleted.
1587 To add a new file in a subdirectory, edit the Makefile.in in that directory,
1588 then simply do a {\bf make}. In most cases, the make will rebuild the Makefile
1589 from the new Makefile.in. In some case, you may need to issue the {\bf make} a
1590 second time. In extreme cases, cd to the top level directory and enter: {\bf
1593 To add dependencies:
1601 The {\bf make depend} appends the header file dependencies for each of the
1602 object files to Makefile and Makefile.in. This command should be done in each
1603 directory where you change the dependencies. Normally, it only needs to be run
1604 when you add or delete source or header files. {\bf make depend} is normally
1605 automatically invoked during the configuration process.
1615 This not normally done if you are developing Bacula, but is used if you are
1616 going to run it to backup your system.
1618 After doing a {\bf make install} the following files will be installed on your
1619 system (more or less). The exact files and location (directory) for each file
1620 depends on your {\bf ./configure} command (e.g. if you are using SQLite instead
1621 of MySQL, some of the files will be different).
1623 NOTE: it is quite probable that this list is out of date. But it is a
1645 create_mysql_database
1647 delete_catalog_backup
1666 \section{Installing Tray Monitor}
1667 \index[general]{Monitor!Installing Tray}
1668 \index[general]{Installing Tray Monitor}
1670 The Tray Monitor is already installed if you used the {\bf
1671 \verb:--:enable-tray-monitor} configure option and ran {\bf make install}.
1673 As you don't run your graphical environment as root (if you do, you should
1674 change that bad habit), don't forget to allow your user to read {\bf
1675 tray-monitor.conf}, and to execute {\bf bacula-tray-monitor} (this is not a
1678 Then log into your graphical environment (KDE, GNOME or something else), run
1679 {\bf bacula-tray-monitor} as your user, and see if a cassette icon appears
1680 somewhere on the screen, usually on the task bar.
1681 If it doesn't, follow the instructions below related to your environment or
1685 \index[general]{GNOME}
1687 System tray, or notification area if you use the GNOME terminology, has been
1688 supported in GNOME since version 2.2. To activate it, right-click on one of
1689 your panels, open the menu {\bf Add to this Panel}, then {\bf Utility} and
1690 finally click on {\bf Notification Area}.
1693 \index[general]{KDE}
1695 System tray has been supported in KDE since version 3.1. To activate it,
1696 right-click on one of your panels, open the menu {\bf Add}, then {\bf Applet}
1697 and finally click on {\bf System Tray}.
1699 \subsection{Other window managers}
1700 \index[general]{Managers!Other window}
1701 \index[general]{Other window managers}
1703 Read the documentation to know if the Freedesktop system tray standard is
1704 supported by your window manager, and if applicable, how to activate it.
1706 \section{Modifying the Bacula Configuration Files}
1707 \index[general]{Modifying the Bacula Configuration Files}
1708 \index[general]{Files!Modifying the Bacula Configuration}
1711 \ilink{Configuring Bacula}{ConfigureChapter} in this manual for
1712 instructions on how to set Bacula configuration files.