4 \chapter{Installing and Configuring PostgreSQL}
5 \label{PostgreSqlChapter}
6 \index[general]{PostgreSQL!Installing and Configuring }
7 \index[general]{Installing and Configuring PostgreSQL }
8 \index[general]{Upgrading}
10 If you have installed PostgreSQL from a package (.deb, .rpm, ...) or
11 already installed it from source, please skip to the next section.
13 If you are building PostgreSQL from source, please be sure to add
14 the {\bf \verb:--:enable-thread-safety} option when doing the ./configure
17 \section{Installing PostgreSQL}
18 \index[general]{PostgreSQL!Installing }
20 If you use the {\bf ./configure \verb:--:with-postgresql=PostgreSQL-Directory}
21 statement for configuring {\bf Bacula}, you will need PostgreSQL version 7.4
22 or later installed. NOTE! PostgreSQL versions earlier than 7.4 do not work
23 with Bacula. If PostgreSQL is installed in the standard system location, you
24 need only enter {\bf \verb:--:with-postgresql} since the configure program will
25 search all the standard locations. If you install PostgreSQL in your home
26 directory or some other non-standard directory, you will need to provide the
27 full path with the {\bf \verb:--:with-postgresql} option.
29 Installing and configuring PostgreSQL is not difficult but can be confusing
30 the first time. If you prefer, you may want to use a package provided by your
31 chosen operating system. Binary packages are available on most PostgreSQL
34 If you prefer to install from source, we recommend following the instructions
36 \elink{PostgreSQL documentation}{http://www.postgresql.org/docs/}.
38 If you are using FreeBSD,
39 \elink{this FreeBSD Diary article}{http://www.freebsddiary.org/postgresql.php}
40 will be useful. Even if you are not using FreeBSD, the article will contain
41 useful configuration and setup information.
43 If you configure the Batch Insert code in Bacula (attribute inserts are
44 10 times faster), you {\bf must} be using a PostgreSQL that was built with
45 the {\bf \verb:--:enable-thread-safety} option, otherwise you will get
46 data corruption. Most major Linux distros have thread safety turned on, but
47 it is better to check. One way is to see if the PostgreSQL library that
48 Bacula will be linked against references pthreads. This can be done
49 with a command such as:
53 nm /usr/lib/libpq.a | grep pthread_mutex_lock
57 The above command should print a line that looks like:
65 if does, then everything is OK. If it prints nothing, do not enable batch
66 inserts when building Bacula.
68 After installing PostgreSQL, you should return to completing the installation
69 of {\bf Bacula}. Later, after Bacula is installed, come back to this chapter
70 to complete the installation. Please note, the installation files used in the
71 second phase of the PostgreSQL installation are created during the Bacula
72 Installation. You must still come back to complete the second phase of the
73 PostgreSQL installation even if you installed binaries (e.g. rpm, deb,
77 \label{PostgreSQL_configure}
78 \section{Configuring PostgreSQL}
79 \index[general]{PostgreSQL!Configuring PostgreSQL -- }
81 At this point, you should have built and installed PostgreSQL, or already have
82 a running PostgreSQL, and you should have configured, built and installed {\bf
83 Bacula}. If not, please complete these items before proceeding.
85 Please note that the {\bf ./configure} used to build {\bf Bacula} will need to
86 include {\bf \verb:--:with-postgresql=PostgreSQL-directory}, where {\bf
87 PostgreSQL-directory} is the directory name that you specified on the
88 ./configure command for configuring PostgreSQL (if you didn't specify a
89 directory or PostgreSQL is installed in a default location, you do not need to
90 specify the directory). This is needed so that Bacula can find the necessary
91 include headers and library files for interfacing to PostgreSQL.
93 An important thing to note here is that {\bf Bacula} makes two connections
94 to the PostgreSQL server for each backup job that is currently running. If
95 you are intending to run a large number of concurrent jobs, check the value
96 of {\bf max\_connections} in your PostgreSQL configuration file to ensure
97 that it is larger than the setting {\bf Maximum Concurrent Jobs}
98 in your director configuration. {\bf Setting this too low will result in
99 some backup jobs failing to run correctly!}
101 {\bf Bacula} will install scripts for manipulating the database (create,
102 delete, make tables etc) into the main installation directory. These files
103 will be of the form *\_bacula\_* (e.g. create\_bacula\_database). These files
104 are also available in the \lt{}bacula-src\gt{}/src/cats directory after
105 running ./configure. If you inspect create\_bacula\_database, you will see
106 that it calls create\_postgresql\_database. The *\_bacula\_* files are
107 provided for convenience. It doesn't matter what database you have chosen;
108 create\_bacula\_database will always create your database.
110 Now you will create the Bacula PostgreSQL database and the tables that Bacula
111 uses. These instructions assume that you already have PostgreSQL running. You
112 will need to perform these steps as a user that is able to create new
113 databases. This can be the PostgreSQL user (on most systems, this is the pgsql
117 \item cd \lt{}install-directory\gt{}
119 This directory contains the Bacula catalog interface routines.
121 \item Create the database owner ({\bf bacula})
122 On many systems, the PostreSQL master
123 owner is {\bf pgsql} and on others such as Red Hat and Fedora it is {\bf
124 postgres}. You can find out which it is by examining your /etc/passwd
125 file. To create a new user under either your name or with say the name
126 {\bf bacula}, you can do the following:
130 (enter root password)
131 su pgsql (or postgres)
133 Shall the new user be allowed to create databases? (y/n) y
134 Shall the new user be allowed to create more new users? (y/n) (choose
138 Normally the {\bf bacula} user must be able to create new databases,
139 if you use the script in the next item,
140 or you will have to create one for it, but it does not need to
143 In newer versions of PostgreSQL, it will not automatically ask
144 if the user {\bf bacula} should be able to create databases or
145 create new users. In that case, you may need to add one of the
146 many command line options that the program {\bf creatuser} has.
147 Please see the PostgreSQL documentation that corresponds to the
148 version you are using.
150 \item ./create\_bacula\_database
152 This script creates the PostgreSQL {\bf bacula} database.
153 Before running this command, you should carefully think about
154 what encoding sequence you want for the text fields (paths, files, ...).
155 We strongly recommend that you use the default value of SQL\_ASCII
156 that is in the create\_bacula\_database script. Please be warned
157 that if you change this value, your backups may fail. After running
158 the script, you can check with the command:
164 and the column marked {\bf Encoding} should be {\bf SQL\_ASCII} for
165 all your Bacula databases (normally {\bf bacula}).
167 \item ./make\_bacula\_tables
169 This script creates the PostgreSQL tables used by {\bf Bacula}.
170 \item ./grant\_bacula\_privileges
172 This script creates the database user {\bf bacula} with restricted access
173 rights. You may want to modify it to suit your situation. Please note that
174 this database is not password protected.
178 Each of the three scripts (create\_bacula\_database, make\_bacula\_tables, and
179 grant\_bacula\_privileges) allows the addition of a command line argument.
180 This can be useful for specifying the user name. For example, you might need
181 to add {\bf -h hostname} to the command line to specify a remote database
184 To take a closer look at the access privileges that you have setup with the
189 PostgreSQL-directory/bin/psql --command \\dp bacula
193 Also, I had an authorization problem with the password. In the end,
194 I had to modify my {\bf pg\_hba.conf} file (in /var/lib/pgsql/data on my machine
195 in /var/lib/postgresql/8.x on others, and in /etc/postgres/8.x/main on
196 still others -- what a mess!) from:
200 local all all ident sameuser
206 This solved the problem for me, but it is not always a good thing
207 to do from a security standpoint. However, it allowed me to run
208 my regression scripts without having a password.
210 A more secure way to perform database authentication is with md5
211 password hashes. Begin by editing the {\bf pg\_hba.conf} file, and
212 above the existing ``local'' and ``host'' lines, add the line:
216 local bacula bacula md5
220 then restart the Postgres database server (frequently, this can be done
221 using "/etc/init.d/postgresql restart" or "service postgresql restart") to
222 put this new authentication rule into effect.
224 Next, become the Postgres administrator, postgres, either by logging
225 on as the postgres user, or by using su to become root and then using
226 {\bf su - postgres} or {\bf su - pgsql} to become postgres.
227 Add a password to the {\bf bacula} database for the {\bf bacula} user using:
232 bacula=# alter user bacula with password 'secret';
238 You'll have to add this password to two locations in the
239 bacula-dir.conf file: once to the Catalog resource and once to the
240 RunBeforeJob entry in the BackupCatalog Job resource. With the
241 password in place, these two lines should look something like:
245 dbname = bacula; user = bacula; password = "secret"
247 # WARNING!!! Passing the password via the command line is insecure.
248 # see comments in make_catalog_backup for details.
249 RunBeforeJob = "/etc/make_catalog_backup bacula bacula secret"
253 Naturally, you should choose your own significantly more random
254 password, and ensure that the bacula-dir.conf file containing this
255 password is readable only by the root.
257 Even with the files containing the database password properly
258 restricted, there is still a security problem with this approach: on
259 some platforms, the environment variable that is used to supply the
260 password to Postgres is available to all users of the
261 local system. To eliminate this problem, the Postgres team have
262 deprecated the use of the environment variable password-passing
263 mechanism and recommend the use of a .pgpass file instead. To use
264 this mechanism, create a file named .pgpass containing the single
269 localhost:5432:bacula:bacula:secret
273 This file should be copied into the home directory of all accounts
274 that will need to gain access to the database: typically, root,
275 bacula, and any users who will make use of any of the console
276 programs. The files must then have the owner and group set to match
277 the user (so root:root for the copy in root, and so on), and the mode
278 set to 600, limiting access to the owner of the file.
280 \section{Re-initializing the Catalog Database}
281 \index[general]{Database!Re-initializing the Catalog }
282 \index[general]{Re-initializing the Catalog Database }
284 After you have done some initial testing with {\bf Bacula}, you will probably
285 want to re-initialize the catalog database and throw away all the test Jobs
286 that you ran. To do so, you can do the following:
290 cd <install-directory>
293 ./grant_bacula_privileges
297 Please note that all information in the database will be lost and you will be
298 starting from scratch. If you have written on any Volumes, you must write an
299 end of file mark on the volume so that Bacula can reuse it. Do so with:
303 (stop Bacula or unmount the drive)
304 mt -f /dev/nst0 rewind
309 Where you should replace {\bf /dev/nst0} with the appropriate tape drive
310 device name for your machine.
312 \section{Installing PostgreSQL from RPMs}
313 \index[general]{PostgreSQL!Installing from RPMs}
314 \index[general]{Installing PostgreSQL from RPMs}
315 If you are installing PostgreSQL from RPMs, you will need to install
316 both the PostgreSQL binaries and the client libraries. The client
317 libraries are usually found in a {\bf devel} or {\bf dev} package, so you must
318 install the following for rpms:
330 and the following for debs:
337 postgresql-client-common
344 These will be similar with most other package managers too. After
345 installing from rpms, you will still need to run the scripts that set up
346 the database and create the tables as described above.
349 \section{Converting from MySQL to PostgreSQL}
350 \index[general]{PostgreSQL!Converting from MySQL to }
351 \index[general]{Converting from MySQL to PostgreSQL }
353 The conversion procedure presented here was worked out by Norm Dressler
354 \lt{}ndressler at dinmar dot com\gt{}
356 This process was tested using the following software versions:
359 \item Linux Ubuntu Lucid
360 \item Mysql Ver 5.0.83
361 \item PostgreSQL 8.4.4
365 WARNING: Always as a precaution, take a complete backup of your databases
366 before proceeding with this process!
369 \item Shutdown bacula (cd /etc/bacula;./bacula stop)
370 \item Run the following command to dump your Mysql database:
374 mysqldump -t -n -c --compatible=postgresql --skip-quote-names --skip-opt \
375 --disable-keys --lock-tables -u bacula -ppassword bacula \
376 | grep -v "INSERT INTO Status" \
377 | sed -e 's/0000-00-00 00:00:00/1970-01-01 00:00:00/g' \
378 | sed -e 's/\\0//' > bacula-backup.sql
382 \item Make a backup of your /etc/bacula directory (but leave the original in
384 \item Go to your Bacula source directory and rebuild it to include PostgreSQL
385 support rather then Mysql support. Check the config.log file for your
386 original configure command and replace enable-mysql with enable-postgresql.
387 \item Recompile Bacula with a make and if everything compiles completely,
388 perform a make install.
389 \item Shutdown Mysql.
390 \item Start PostgreSQL on your system.
391 \item Create a bacula user in Postgres with the createuser command. Depending on
392 your Postgres install, you may have to SU to the user who has privileges to
393 create a user, you can also have to change permissions on catalog scripts
394 to fit your situation.
395 \item Verify your pg\_hba.conf file contains sufficient permissions to allow
396 bacula to access the server. Mine has the following since it's on a secure
403 host all all 127.0.0.1 255.255.255.255 trust
405 NOTE: you should reload (or restart) your postgres server if you made changes
410 \item Change into the /etc/bacula directory and prepare the database and
411 tables with the following commands:
415 ./create_postgresql_database
417 ./make_postgresql_tables
419 ./grant_postgresql_privileges
424 \item Verify you have access to the database:
434 You should not get any errors.
435 \item Load your database from the Mysql database dump with:
439 psql -Ubacula bacula <bacula-backup.dmp>
444 \item Resequence your tables with the following commands:
450 SELECT SETVAL('basefiles_baseid_seq', (SELECT MAX(baseid) FROM basefiles));
451 SELECT SETVAL('client_clientid_seq', (SELECT MAX(clientid) FROM client));
452 SELECT SETVAL('file_fileid_seq', (SELECT MAX(fileid) FROM file));
453 SELECT SETVAL('filename_filenameid_seq', (SELECT MAX(filenameid) FROM filename));
454 SELECT SETVAL('fileset_filesetid_seq', (SELECT MAX(filesetid) FROM fileset));
455 SELECT SETVAL('job_jobid_seq', (SELECT MAX(jobid) FROM job));
456 SELECT SETVAL('jobmedia_jobmediaid_seq', (SELECT MAX(jobmediaid) FROM jobmedia));
457 SELECT SETVAL('media_mediaid_seq', (SELECT MAX(mediaid) FROM media));
458 SELECT SETVAL('path_pathid_seq', (SELECT MAX(pathid) FROM path));
459 SELECT SETVAL('basefiles_baseid_seq', (SELECT MAX(baseid) FROM basefiles));
460 SELECT SETVAL('client_clientid_seq', (SELECT MAX(clientid) FROM client));
461 SELECT SETVAL('file_fileid_seq', (SELECT MAX(fileid) FROM file));
462 SELECT SETVAL('filename_filenameid_seq', (SELECT MAX(filenameid) FROM filename));
463 SELECT SETVAL('fileset_filesetid_seq', (SELECT MAX(filesetid) FROM fileset));
464 SELECT SETVAL('job_jobid_seq', (SELECT MAX(jobid) FROM job));
465 SELECT SETVAL('jobmedia_jobmediaid_seq', (SELECT MAX(jobmediaid) FROM jobmedia));
466 SELECT SETVAL('media_mediaid_seq', (SELECT MAX(mediaid) FROM media));
467 SELECT SETVAL('path_pathid_seq', (SELECT MAX(pathid) FROM path));
468 SELECT SETVAL('pool_poolid_seq', (SELECT MAX(poolid) FROM pool));
470 SELECT SETVAL('device_deviceid_seq', (SELECT MAX(deviceid) FROM device));
471 SELECT SETVAL('location_locationid_seq', (SELECT MAX(locationid) FROM location));
472 SELECT SETVAL('locationlog_loclogid_seq', (SELECT MAX(loclogid) FROM locationlog));
473 SELECT SETVAL('log_logid_seq', (SELECT MAX(logid) FROM log));
474 SELECT SETVAL('mediatype_mediatypeid_seq', (SELECT MAX(mediatypeid) FROM mediatype));
475 SELECT SETVAL('storage_storageid_seq', (SELECT MAX(storageid) FROM storage));
479 \item At this point, start up Bacula, verify your volume library and perform
480 a test backup to make sure everything is working properly.
483 \section{Upgrading PostgreSQL}
484 \index[general]{Upgrading PostgreSQL }
485 \index[general]{Upgrading!PostgreSQL }
486 \index[general]{Upgrading}
487 If you upgrade PostgreSQL, you must reconfigure, rebuild, and re-install
488 Bacula otherwise you are likely to get bizarre failures. If you
489 to modify the bacula.spec file to account for the new PostgreSQL version.
490 You can do so by rebuilding from the source rpm. To do so, you may need
491 install from rpms and you upgrade PostgreSQL, you must also rebuild Bacula.
493 \section{Tuning PostgreSQL}
494 \index[general]{Tuning}
496 If you despool attributes for many jobs at the same time, you can tune the
497 sequence object for the \texttt{FileId} field.
501 ALTER SEQUENCE file_fileid_seq CACHE 1000;
505 \index[general]{Credits }
506 Many thanks to Dan Langille for writing the PostgreSQL driver. This will
507 surely become the most popular database that Bacula supports.