2 # A set of useful functions to be sourced in each test
10 echo "s% mail =%# mail = %g" >${outf}
11 echo "s% operator =%# operator =%g" >>${outf}
12 cp bin/bacula-dir.conf tmp/1
13 sed -f ${outf} tmp/1 >bin/bacula-dir.conf
16 echo " === Starting $TestName at `date +%R:%S` ==="
17 echo " === Starting $TestName at `date +%R:%S` ===" >>working/log
24 MUID=`/usr/bin/id | awk -F= '{print $2}' | awk -F\( '{print $1}'`
25 if [ $MUID != 0 ] ; then
27 echo "You must be root to run this test."
28 echo " ===== !!!! $TestName not run at `date +%R:%S` ==="
29 echo " ===== !!!! $TestName not run at `date +%R:%S` !!!! ===== " >>test.out
37 if test x${TAPE_DRIVE} = x/dev/null ; then
38 echo "$TestName test needs a tape drive, but has none."
43 require_second_drive()
45 if test x${TAPE_DRIVE1} = x/dev/null ; then
46 echo "$JobName needs second drive, but has none."
53 if test x${AUTOCHANGER} = x/dev/null ; then
54 echo "$TestName needs an autochanger, but has none."
61 if test x${USE_VTAPE} = x ; then
62 echo "$TestName test needs the vtape driver."
70 if [ $os != 'Linux' ]; then
71 echo "This test $TestName runs only on Linux"
76 skip_if_no_autochanger()
78 if test x${AUTOCHANGER} = x/dev/null ; then
79 echo "$TestName test skipped. No autochanger."
87 if test "$debug" -eq 1 ; then
96 if test "$debug" -eq 1 ; then
101 check_files_written()
105 FILES=`awk '/FD Files Written:/ { last=$4 } END { print last }' $LOG`
107 if [ "$NB" != "$FILES" ]; then
108 print_debug "Expect $NB files, get $FILES"
116 # T=`awk 'BEGIN {t["secs"]=1;t["sec"]=1;t["min"]=60;t["mins"]=60}; /Elapsed time:/ { last=$3*t[$4] } END { print last }' $LOG`
126 # T=$(get_duration $LOG)
127 # if [ "$T" -$OP "$TIME" ]; then
128 # print_debug "Expect $OP than $TIME sec, get $T"
137 if test "$debug" -eq 1 ; then
138 bin/bacula-ctl-sd start
139 bin/bacula-ctl-fd start $1
140 bin/bacula-ctl-dir start
141 cat tmp/bconcmds | bin/bconsole -c bin/bconsole.conf
144 bin/bacula start 2>&1 >/dev/null
145 cat tmp/bconcmds | bin/bconsole -c bin/bconsole.conf 2>&1 >/dev/null
152 if test "$debug" -eq 1 ; then
153 cat tmp/bconcmds | bin/bconsole -c bin/bconsole.conf
155 cat tmp/bconcmds | bin/bconsole -c bin/bconsole.conf 2>&1 >/dev/null
161 if test "$debug" -eq 1 ; then
162 cat tmp/bconcmds | bin/btape -c bin/bacula-sd.conf DDS-4 | tee tmp/log1.out
164 cat tmp/bconcmds | bin/btape -c bin/bacula-sd.conf DDS-4 2>&1 >tmp/log1.out
170 if test "$debug" -eq 1 ; then
171 bin/bscan $* | tee tmp/log.out
173 bin/bscan $* 2>&1 >/dev/null
179 B=`echo $LIBDBI | sed 's/;//' | sed 's/;//g'`
180 B_D=`echo $B | awk '{print $3}'`
181 B_t=`echo $B | awk '{print $6}'`
182 B_p=`echo $B | awk '{print $9}'`
184 BSCANLIBDBI="${LIBDBI:+1}"
186 if test "$BSCANLIBDBI" = "1" ; then
187 BSCANLIBDBI="-D $B_D -h $B_t -t $B_p"
195 bin/bacula stop 2>&1 >/dev/null
198 check_for_zombie_jobs()
200 scripts/check_for_zombie_jobs $*
205 if test $# -eq 1; then
213 mv bin/bacula-dir.conf bin/1
214 echo "s%${oldname}%${newname}%g" >tmp/1
215 sed -f tmp/1 bin/1 >bin/bacula-dir.conf
216 # echo "Job ${oldname} changed to ${newname}"
221 grep "^ Termination: *Backup OK" tmp/log1.out 2>&1 >/dev/null
223 grep "^ Termination: .*Backup Error" tmp/log1.out 2>&1 >/dev/null
224 if test $? -eq 0; then
227 grep "^ Termination: *Restore OK" tmp/log2.out 2>&1 >/dev/null
229 grep "^ Termination: .*Restore Error" tmp/log2.out 2>&1 >/dev/null
230 if test $? -eq 0; then
233 grep "^ Termination: *Restore OK -- warning file count mismatch" tmp/log2.out 2>&1 >/dev/null
234 if test $? -eq 0; then
237 grep "^ Termination: .*Verify Differences" tmp/log2.out 2>&1 >/dev/null
238 if test $? -eq 0; then
245 if test "$debug" -eq 1 ; then
246 diff -ur build tmp/bacula-restores${cwd}/build
248 diff -ur build tmp/bacula-restores${cwd}/build 2>&1 >/dev/null
253 check_restore_tmp_build_diff()
255 if test "$debug" -eq 1 ; then
256 diff -ur tmp/build tmp/bacula-restores${cwd}/tmp/build
258 diff -ur tmp/build tmp/bacula-restores${cwd}/tmp/build 2>&1 >/dev/null
265 if [ $zstat != 0 ] ; then
267 echo " !!!!! $TestName failed!!! `date +%R:%S` !!!!! "
268 echo " !!!!! $TestName failed!!! `date +%R:%S` !!!!! " >>test.out
269 echo " Status: zombie=$zstat backup=$bstat restore=$rstat diff=$dstat" >>test.out
273 if [ $dstat != 0 -o $bstat != 0 -o $rstat != 0 ] ; then
276 echo " !!!!! $TestName failed!!! `date +%R:%S` !!!!! "
277 echo " !!!!! $TestName failed!!! `date +%R:%S` !!!!! " >>test.out
278 if [ $bstat != 0 -o $rstat != 0 ] ; then
279 echo " !!!!! Bad termination status !!!!! "
280 echo " !!!!! Bad termination status !!!!! " >>test.out
282 echo " !!!!! Restored files differ !!!!! "
283 echo " !!!!! Restored files differ !!!!! " >>test.out
285 echo " Status: backup=$bstat restore=$rstat diff=$dstat"
286 echo " Status: backup=$bstat restore=$rstat diff=$dstat" >>test.out
290 echo " ===== $TestName OK `date +%R:%S` ===== "
291 echo " ===== $TestName OK `date +%R:%S` ===== " >>test.out
292 if test "$debug" -eq 0 ; then
300 scripts/copy-tape-confs
306 scripts/copy-test-confs
312 if test "x${REGRESS_WAIT}" = "x1"; then
313 echo "Start Bacula under debugger and enter anything when ready ..."
322 if test -n "$DRIVE" -a -n "$SLOT"; then
323 if test ! -c $DRIVE -a ! -b $DRIVE -a x$USE_VTAPE != x ; then
332 if test a$USE_VTAPE = a; then
342 if test a$USE_VTAPE = a; then
349 # Get a tape from slot1
350 slot=`bin/$MTX ${AUTOCHANGER} loaded 0 ${TAPE_DRIVE} $DRIVE1`
353 bin/$MTX ${AUTOCHANGER} load $SLOT1 ${TAPE_DRIVE} $DRIVE1
360 rewind_drive ${TAPE_DRIVE}
361 bin/$MTX ${AUTOCHANGER} unload $slot ${TAPE_DRIVE} $DRIVE1
362 bin/$MTX ${AUTOCHANGER} load $SLOT1 ${TAPE_DRIVE} $DRIVE1
369 # $1 has currently loaded slot, load the other one i.e. if 1, load 2;
370 # if 2, load 1; if 0 load 1
374 rewind_drive ${TAPE_DRIVE}
377 bin/${AUTOCHANGER_SCRIPT} ${AUTOCHANGER} load $SLOT1 ${TAPE_DRIVE} $DRIVE1
381 bin/${AUTOCHANGER_SCRIPT} ${AUTOCHANGER} unload $1 ${TAPE_DRIVE} $DRIVE1
382 bin/${AUTOCHANGER_SCRIPT} ${AUTOCHANGER} load $SLOT2 ${TAPE_DRIVE} $DRIVE1
386 bin/${AUTOCHANGER_SCRIPT} ${AUTOCHANGER} unload $1 ${TAPE_DRIVE} $DRIVE1
387 bin/${AUTOCHANGER_SCRIPT} ${AUTOCHANGER} load $SLOT1 ${TAPE_DRIVE} $DRIVE1
391 echo "Something went wrong. Expected $SLOT1 or $SLOT2, got $1"
398 # Save current directory
400 if test "x${REGRESS_DEBUG}" = "x1"; then
406 # Source the configuration variables
409 db_name=${db_name:-"regress"}
410 db_user=${db_user:-"regress"}
411 db_password=${db_password:-""}
415 if [ x$USE_VTAPE = xyes ]; then
416 mkdir -p $cwd/working/ach
419 TAPE_DRIVE=$cwd/working/ach/drive1
420 TAPE_DRIVE1=$cwd/working/ach/drive1
421 AUTOCHANGER=$cwd/working/ach/config
422 AUTOCHANGER_SCRIPT=disk-changer
425 cat > $AUTOCHANGER <<EOF
431 AUTOCHANGER_SCRIPT=${AUTOCHANGER_SCRIPT:-mtx-changer}
432 LD_LIBRARY_PATH=$cwd/bin
433 export LD_LIBRARY_PATH