2 # Default Bacula Storage Daemon Configuration file
4 # For Bacula release 1.33
6 # You may need to change the name of your tape drive
7 # on the "Archive Device" directive in the Device
8 # resource. If you change the Name and/or the
9 # "Media Type" in the Device resource, please ensure
10 # that dird.conf has corresponding changes.
13 Storage { # definition of myself
15 SDPort = @sdport@ # Director's port
16 WorkingDirectory = "@working_dir@"
17 Pid Directory = "@piddir@"
18 Subsys Directory = "@subsysdir@"
19 TLS Authenticate = yes
21 TLS Certificate = "@scriptdir@/tls-cert.pem"
22 TLS Key = "@scriptdir@/tls-cert.pem"
23 TLS CA Certificate File = "@scriptdir@/tls-CA.pem"
27 # List Directors who are permitted to contact Storage daemon
31 Password = "ccV3lVTsQRsdIUGyab0N4sMDavui2hOBkmpBU0aQKOr9"
32 TLS Authenticate = yes
34 TLS Certificate = "@scriptdir@/tls-cert.pem"
35 TLS Key = "@scriptdir@/tls-cert.pem"
36 TLS CA Certificate File = "@scriptdir@/tls-CA.pem"
40 # Devices supported by this Storage daemon
41 # To connect, the Director's bacula-dir.conf must have the
42 # same Name and MediaType.
48 Archive Device = @tmpdir@
49 LabelMedia = yes; # lets Bacula label unlabelled media
51 AutomaticMount = yes; # when device opened, read it
54 # Maximum File Size = 10KB
60 Archive Device = @tmpdir@
61 LabelMedia = yes; # lets Bacula label unlabelled media
63 AutomaticMount = yes; # when device opened, read it
71 # Media Type = DLT8000
72 # Archive Device = /dev/nst0
73 # AutomaticMount = yes; # when device opened, read it
75 # RemovableMedia = yes;
81 # Archive Device = /dev/nst0
82 # AutomaticMount = yes; # when device opened, read it
84 # RemovableMedia = yes;
90 # Archive Device = /mnt/floppy
91 # RemovableMedia = yes;
92 # Random Access = Yes;
93 # AutomaticMount = yes; # when device opened, read it
98 # A very old Exabyte with no end of media detection
101 # Name = "Exabyte 8mm"
103 # Archive Device = /dev/nst0
104 # Hardware end of medium = No;
105 # AutomaticMount = yes; # when device opened, read it
107 # RemovableMedia = yes;
111 # Send all messages to the Director,
112 # mount messages also are sent to the email address
116 director = @hostname@-dir = all, !terminate