- After one of these has been done the upgrade should work fine.
-======
-
-New Features in 1.39.30:
-- The Bacula source code is now copyrighted by the Free Software
- Foundation Europe. The Developer's Guide documents the new procedures,
- and the LICENSE file has been updated.
-- Turn on disk seek code for restores.
-- Apply Jaime Ventura's patch that implements the Messages resource
- Mail On Success directive.
-- The Client returns its Version string, which is printed in the Job
- report.
-- The Client returns whether or not VSS and Encryption are used, which
- are printed in the Job report.
-
-Major new Features in 1.40.0:
-- The basic features of Migration are now complete, and
- are documented in a new Migration chapter in the manual
- http://www.bacula.org/dev-manual/Migration.html
-- There is an Encryption chapter in the doc.
- http://www.bacula.org/dev-manual/Bacula_Data_Encryption.html
-- Additional support for removable devices. See the
- Requires Mount, Mount Point, Mount Command, and Unmount
- Commands in the Storage daemon configuration chapter:
- http://www.bacula.org/dev-manual/Storage_Daemon_Configuratio.html
- Also see the Edit Codes for Mount and Unmount Directives in the
- same chapter.
-- Switch the Win32 build from using Microsoft C++ to using mingw32
- cross-compiling. The initial work was done by Howard Thomson,
- then tweaked by me. Robert Nelson then totally reworked the
- cross-compiling code so that it not only cross-compiles, but
- also compiles on Visual Studio, and at the same time, he added
- all the current Unix features to the FD, such as selection on
- drives, encryption support, building *all* the tools, ...
-- The Director and Storage daemon have now been ported to Win32.
- This code is working but should still be considered beta (i.e.
- test carefully before putting into production).
-- Data encryption done in the Client is now supported due to code
- submitted by Landon Fuller.
-- Bacula restore and bextract can now extract non-portable Win32 data to
- any client (including Unix/Linux clients). Of course, in doing so,
- the Microsoft specific permissions and ACLs will be lost. Thanks
- to Thorsten Engel for this code.
-- The 260 character limitation for Win32 paths name lengths is now
- eliminated thanks to Thorsten Engel.
-- Eric Bollengier wrote new RunScript directives that includes
- the old RunBefore/AfterJob and ClientRunBefore/AfterJob features
- plus a *lot* more, allowing you to control just about every aspect
- of running scripts. See the manual for detailed documentation.
- http://www.bacula.org/dev-manual/Configuring_Director.html#5227
-- SunOS ACLs should now work thanks to a patch from David Duchscher.
-- Apply days keyword patch from Alexander.Bergolth at wu-wien.ac.at
- If this patch is applied, the number of days can be specified with
- "list nextvol days=xx"
- or
- "status dir days=xx"
- This can be used to preview the next scheduled job (and the
- next tape to be used) on Fridays if there are no scheduled jobs during
- the weekend.
-- Apply patch for enhancing wait from Eric Bollengier. One can now:
- wait (wait for all jobs to stop)
- wait jobid=nn
- wait jobuid=unique id
- wait job=job-name
-- Volumes can now be set to Enable, Disable, or Archive. If they
- are not enabled, Volumes will not be mounted.
- Implement update volume enable=(on|off|true|false|archived|0|1|2)
-- Add Catalog message destination in Messages resource that puts the
- job report in the Log database table.
-
-
-New Features in 1.40.0:
-- Add enable/disable job=<job-name>. This command prevents
- the specified job from being scheduled. Even when disabled,
- the job can be manually started from the console.
-- The database Id records should be 32/64 bit independent now. 64 bits
- can be enabled by changing one define, but this has never been tested.
-- Relative path specifications (i.e. ../xxx) are now permitted in
- the restore cd command.
-- When running multiple simultaneous jobs, most jobs that use spooling
- will now finish faster due to a mutex optimization made by Eric
- Bollengier.
-- Conf files containing UTF-8 marker at the head of the file as well as
- conf files containing Window cr/lf and Mac cr line termination characters
- are now accepted thanks to Robert Nelson.
-- Windows tray status windows are scrollable and resizable.
-- Win32 external script execution is much more flexible -- handles
- spaces in names better, ...
-- Lots of DVD fixes -- writing DVDs is now reported to work.
-- Fix opening of database in a restricted console to respect
- any Catalog ACL.
-- Permit multiple console/director resources in bconsole.conf.
- patch from Carsten Paeth calle@calle.in-berlin.de
-- Character substitution in Job/JobDefs WriteBootStrap.
- from Eric Bollengier.
-- Apply patch supplied in bug #656 to pass priority field
- in the run dialog to the Director in gnome console.
-- Add support of encrypted data stream to bscan from Eric.
- display data_len instead of data content (may be binary).
-- Add Enabled=xxx on update slots command.
-- Add host:port to connect failure messages to FD and SD from Dir/
-- Add WhereACL to console ACL list. If nothing is specified, only
- the default is permitted for restore. Otherwise, *all* allows any
- path, or you can specify permitted paths. This should allow control
- over where users can restore files. This is untested.
-- Install man pages with 'make install'.
-- Add Media.Enabled flag to client backups for dotcmds.c
-- Enforce Media.Enabled=1 for a current restore to work
-- Require restore case 3 to have sqlquery permission to work.
-- Add -n option to bconsole to turn off conio.
-- The bytes field in the terminated jobs part of the status
- command now reports in KB, MB, ... units.
-- When not descending into a directory, print the File= name that
- triggered it -- makes why not descending a bit clearer
-- Do not unload autochanger when doing "update slots"
-- Implement mount command for autochanger
-- Fix bug #462 incorrect error message printed when client script called
- from File= was not found.
-- Fix bug #558 (waiting for feedback) where Bacula needs too much time to
- do a rewind on Solaris when no tape is in the drive (Solaris does not
- have the detailed errno found on Linux). Added Solaris specific code.
- Note, this may apply to other OSes as well.
-- The examples directory has a new bacula_mail_summary.sh file that
- creates a single email summary of any number of jobs. Submitted by
- Andrew J. Millar.
-- Add nagios plugin to the examples directory. Submitted by
- Christian Masopust.
-- Modify most restore error messages to be queued so that they
- appear at the end of the job rather than mixed with the restore
- listing where they could be "lost".
-- Apply patch supplied by user (slightly modified) to fix
- correct detection of holes in block devices and FIFOs.
- Bug # 506.
-- Added a report.pl program to the examples directory from Jonas Bjorklund.
-- Add two new queries to query.sql provided by Arno. One
- list volumes known to the Storage device, and the other
- lists volumes possibly needing replacement (error, ...).
-- Implement new code for changing userid and group at startup. This
- should get Bacula into the correct groups.
-- Implement support for removable filesystems.
-- Transfer rates are now presented in a more readable format thanks
- to a user submission.
-- SD is now aware of what volumes are mounted. More information is printed
- in the Status report.
-- The Pool Maximum Volumes directive is now respected in all places.
-- A Storage device can now be specified in a Pool resource. It will override
- all other Storage specifications.
-- Most but not all directives accept true/false in place of yes/no.
-- A patch from Karl Hakimian that reads JobIds, FileIndexes
- from a database table for restore.
-- There are a number of new tables. Some such as the Location table are
- designed for user use in doing Volume Management software.
-- Maximum Changer Wait, Maximum Open Wait, Maximum Rewind Wait to
- accept time qualifiers.
-- Implement jobuid to replace old usage of job in keywords as
- suggested by Eric Bollengier.
-- Implement write variables for Python to set Priority (anytime), and
- Job Level, only during JobInit event.
-- Use the keyword ujobid to mean the unique job id; job or jobname
- to mean the Job name given on the Name directive, and jobid to
- be the numeric (non-unique) job id.
-- Allow the SD to use multiple drives during a backup/restore (only
- one at a time). This is not well tested.
-- Integrate addition of line count limitation to bsmtp -l from
- Sebastian Stark <stark at tuebingen.mpg.de>
-- Split the bacula start/start script into four files:
- bacula -- starts and stops calling other scripts
- bacula-ctl-dir -- starts/stops the director
- bacula-ctl-fd -- starts/stops the File daemon
- bacula-ctl-sd -- starts/stops the Storage daemon
-- Remove automatic case folding on Windows FDs. You must
- explicitly use the 'Ignore Case = yes' option.
-- Implement wild program in tools directory for testing
- wild-cards. Almost identical to the regex program.
-- Use the new bregex.c to implement Regex expressions on Win32.
-- Apply patch from Christopher Hull
- - Allow multiple connections to database with different
- parameters.
- - Invalidate the scheduler when doing a reload. Fixes seg
- fault, but still 60 second window.
- - Additional info in Reschedule message.
- - Use set_jcr_job_status() everywhere to prevent loss of
- cancel, error.
- - Display peer IP in FD if error from connecting DIR.
- - Don't increment file count for DIRBEGIN.
- - Replace illegal characters in Win32 filename by _.
- - Add SE_CREATE_PERMANENT_NAME privilege in Win32.
- - Hash hard link filenames rather than linked list (performance).
- - Fix for security failure in chdir on Win32.
- - Add CreateDirectoryA/W win32 API entry points.
-- programs to duplicate Bacula's base64 algorithm using standard
- routines. This fixes bugs #296, and 565. Patch submitted by
- author of bug #565.
-- Fixes to reloading the Dir conf file from Eric Bollengier and Christopher
- Hull.
-- Modify LICENSE to correct some problems pointed out by Debian.
-- Apply a patch submitted by cesarb in bug #606 to implement O_NOATIME support.
- O_NOATIME is a open() flag which makes it possible to read a file without
- updating the inode atime (and also without the inode ctime update which
- happens if you try to set the atime back to its previous value). It also
- prevents a race condition when two programs are reading the same file, but
- only one does not want to change the atime. It's most useful for backup
- programs and file integrity checkers (and bacula can fit on both
- categories).
- You enable it in the Bacula FileSet Options resource by setting:
- noatime = yes
- The effect of this option is similar to the keepatime option except
- it is more efficient and avoids modifying ctime.
-- Implement a pile of new man pages contributed by Jose Tallon.
-- Implement a number of user supplied patches for DVD writing.
-- Modify the database format for handling Migration jobs:
- Add PriorJobId, RealEndTime to Job table
- Delete MAC table
- Remove Stripe from JobMedia record (not used, wasting space)
- Add ScratchPoolId, RecyclePoolId, Enabled to Media record
- Add Cost to Location table.
- Enabled to Media table and Location table.
-- Security: harden authentication failure in FD by single threading errors
- and forcing a 6 second wait.
-- If using GCC (actually g++) add the following compiler flags
- -fno-strict-aliasing -fno-exceptions -fno-rtti
-- Turn on new bsnprintf() code.
- The reason for this code is to eliminate the
- security problems associated with using the system libraries
- print routines.
-- Implement job report that indicates where Storage and Pool
- came from -- with overrides and Pool storage and NextPool,
- it is all very complicated.
-- Add more detail (Storage, Device) to list of volumes printed
- for restore.
-- Add new VOLMGMT message class. No messages are yet sent with this
- class.
-- Spend a lot of time integrating mkcdrec with the rescue disk.
-- Add spooling/despooling info in status output of SD.
-- Add Comment field to llist of a volume.
-- Allow true/false in some yes/no questions.
-
-Additional Features Added for Win32:
-- Added DriveType directive to the Director's Include Option FileSet
- resource. Allowed values are: fixed, removable, cdrom, and remote. There
- is only an implementation for Windows because it is the only platform that
- has the concept of drives.
-
-- Adds EnhancedWild directive to the Director's Include Option FileSet
- resource. Allowed values are: yes and no.
-
- When EnhancedWild is enabled then the processing of the
- Wild, WildDir and WildFile is changed in the following ways.
-
- Patterns conform to Posix
- \ is not a special character in character classification []
- To match a - it must be the first or last character
- To match a ] it must be the first character
-
- fnmatch option FNM_FILE_NAME is specified * doesn't match a /
- so it won't match multiple directory levels in a path
-
-- Relative WildFile patterns (ones without a leading /) match
- against the filename portion. This in combination with the
- FNM_FILE_NAME fnmatch() flag makes directives such as WildFile =
- abc*.def work as expected.
-
-- Adds support for the shell's feature of brace expansion.
-
- Here is an example where braces allow 24 lines to be expressed in 5.
-
- # Exclude directories full of lots and lots of useless little files
- WildDir = "[A-Z]:/{Documents and Settings,{WINNT,Windows}/Profiles}/*/Cookies"
- WildDir = "[A-Z]:/{Documents and Settings,{WINNT,Windows}/Profiles}/*/Recent"
- WildDir = "[A-Z]:/{Documents and Settings,{WINNT,Windows}/Profiles}/*/{Local Settings,LOCALS~1}/History"
- WildDir = "[A-Z]:/{Documents and Settings,{WINNT,Windows}/Profiles}/*/{Local Settings,LOCALS~1}/Temp"
- WildDir = "[A-Z]:/{Documents and Settings,{WINNT,Windows}/Profiles}/*/{Local Settings,LOCALS~1}/Temporary Internet Files"
+Other features or bug fixes:
+- Fixed bugs: 916, 910, 917, 914, 906, 907,
+ 842, 830, 893, 861, 888, 886, 807, 877, 872
+ 885, 887, 864, 874, 882, 881, 863, 859,
+ 856, 854, 845, 847, 846, 809, 772,
+ 822, 825, 824, 808, 802, 797, 798, 795, 789, 791,
+ 788, 780, 763, 782, 612, 767, 775, 621, 772, 764,
+ 766, 621, 761, 755, 750, 741, 747, 742, 744, and 743.
+- Configure bat with --enable-bat. Define qwt libraries with
+ --with-qwt=<dir>. See Installation chapter of manual for details.
+- Create a depkgs-qt package that has both Qt4 and qwt, which are
+ needed to build bat. Most modern Linux systems will have both
+ these packages in the distro.
+- Storage overrides delete all previous storage definitions instead
+ of prepending.
+- One should be able to mount and unmount removable devices if the
+ Device resource has Removeable Media set and the mount and unmount
+ directives are defined.
+- ./configure will do a better job of searching for qwt libraries.
+- The Win32 version can no longer be shutdown from the tray monitor.
+ Use the command line or the Services panne.
+- Keep prune_volumes() from pruning the whole Scratch pool.
+- More debug output in status storage.
+- Correct moving a Scratch volume from pool to pool (some
+ critical columns were lost).
+- Different locking in reservations and despooling systems,
+ which means more micro-locking and less macro-locking, which
+ should give a lot more concurrency at the expense of slightly
+ (<0.1%) more overhead due to more locking/unlocking, but
+ concurrent jobs should run much faster.
+- Additional drive reservation algorithm that should solve a lot of
+ the problems experienced with multiple drive autochangers.
+- Storage daemon status command enhanced to more clearly show Volume,
+ pool and media type when a job is waiting.
+- Made bsmtp work with more strict SMTP servers.
+- Detect doubly freed buffers in smartall.c
+- wx-console renamed to bwx-console (Fedora request)
+- gnome-console renamed to bgnome-console (Fedora request)
+- Migration preserves original job's FileSetId
+- Spooling implemented for migration jobs.
+- Config files can be read through a pipe, by specifying a leading |
+ in front of the configuration path/filename.
+- New memory command (bconsole) that will print the current Director's
+ memory usage, and an in use buffer dump.
+- Console name changed from *Console* to -Console- to accomodate Win32
+ filename restrictions.
+- Corrected the Win32 ftruncate bug.
+- Additional version information added to Job reports.
+- New -8 option for bsmtp to specify UTF-8 encoding type.
+- bsmtp will no longer add < > to target (from, to, cc) if there
+ is already a < in the target.
+- Prefer Mounted Volumes extended to mean a volume that is being
+ mounted by another job.
+- Runscript timing set to same as version 1.38.11
+- New TLS Allowed CN directive(s) permitted.
+- New bconsole 'exec' command to run external script/command.
+- Turn on FreeBSD/OpenBSD code to set EOT model on tape.
+- Drop from root done before database is opened.
+- Database user and name can be configured with:
+ --with-db-name=name --with-db-user=user
+- Turn on wait_for_drive in mtx-changer script.
+- Rework how bar codes are handled in mtx-changer script.
+ This appears to have been an unreported bug.
+- Updated nagios plugin supplied by Christian Masopust
+- Better restricted console ACL checking.
+- New Client Connect Wait directive in Storage daemon so that
+ users can configure how long SD waits for FD connection.
+- Bacula will no longer permit pruning of the currently running
+ job (note, if other jobs are running, they may be pruned).
+- Sockets are no longer restored.
+- dbcheck works in 300K chunks so will typically run faster.
+- Include/Exclude lists can now be efficiently handled for quite
+ large sizes -- tens of thousands of entries.
+- Several memory leaks in migration and database usage were fixed.
+- New console keyword restoreclient, which specifies the client to
+ which the restore will be sent. The client keyword specifies
+ the backup client. The restoreclient keyword is optional if it is
+ not specified, the backup client will also be the restore client.
+- The disk file size is now checked to ensure that it agrees with the
+ catalog value before Bacula will append to the disk (same as tape
+ and DVD).