+Version 2.2.10 is primarily a Storage daemon reservations system
+ enhancement to 2.2.9-beta
+16Apr08
+kes Permit multiple simultaneous restores -- experiment.
+15Apr08
+kes Backport development stream SD reservation system changes.
+ See below:
+===
+16Apr08
+kes Move final volume swapping code to DCR method and
+ call it from acquire_for_read().
+kes When wrong volume is mounted during read, unload_autochanger.
+14Apr08
+kes Stop searching for Volumes in SD askdir if DIR returns the
+ same volume name twice in a row.
+13Apr08
+kes Tweak the swap Volume from one drive to another code so that
+ it now seems to work.
+kes Resolve several problems with recycling that broke the new
+ code (these problems are in 2.2.9 as well).
+kes Remove the volume lock when calling the sysop code.
+kes Don't mark a reserved volume with no writers as unused otherwise
+ jobs fail.
+12Apr08
+kes Rework class structures for VOLRES, DCR, and DEVICE to make
+ the method names a bit more logical, and for more logically
+ handling the responsibilities.
+11Apr08
+kes Remove redundant code in terminating the scheduler that just
+ causes a seg fault in many cases.
+kes Cleanup releasing a volume and make it a DCR method.
+kes Improve algorithm for detecting pre-reserved volume and
+ swapping volumes.
+10Apr08
+kes Tweak volume swapping code so it works.
+kes Correct name overloading in mount.c
+kes Replace released flag in VOLRES with reserved and add access
+ methods for the VOLRES class.
+kes Prevent volume from being released while being swapped.
+kes Refactor parts of stored/mount.c
+09Apr08
+ebl Add sanity checks for VolWriteTime and VolReadTime
+ebl Take care of bad clock changes while computing VolWriteTime
+ and VolReadTime. This should fix or limit #1066
+kes Correct error string numbers in dird/catreq.c
+kes Restructure reserving, acquiring, and mounting volumes. Calls to
+ autochanger are deferred for mount.c -- simplifes the code.
+08Apr08
+kes Do not prune any running job. It just fails the job.
+kes Lock the volumes when changing dev->reserved_device and marking
+ the volume unused otherwise the device can get reserved by
+ another job before the volume is released, thus blocking it.
+===
+
+Version 2.2.9 is a bug fix to version 2.2.8:
+- Close bat console windows first to eliminate error message
+ from the notifier.
+- Remove useless code in Scheduler that causes seg fault on
+ termination.
+- Correct some SD catalog request error messages.
+- Don't allow pruning of any running job.
+- Turn off code in read_record that causes a seg fault in the SD
+ when reading past an EOS_LABEL.
+- Turn off unloading the autochanger in reserve.c as it just
+ causes problems.
+- Lock volumes when unreserving a device.
+- Do not mark volume unused when recycling.
+- Fix bug #1068 fixes a SD crash when using Virtual autochanger.
+- Generate correct JobMedia records during spooling/despooling when
+ running concurrent jobs. Thanks to Tom Ivar Helbekkmo
+ <tih@hamartun.priv.no> for excellent analysis and testing.
+- *Massive* commit of all fixes and back ports to create 2.2.9
+ Mostly SD reservations enhancements.
+- Fix Win32 FD backup/restore memory leak due to improper termination
+ of BackupRead/Write. This fixes bug# 1038.
+- Fixes a StorageId problem with volumes after migration.
+- Implements autostart scripts for Debian
+- Fix mtx-changer.in for broken Debian mt program.
+- Apply doc fix from bug #1062.
+- Resolve crash and improper restore wx-console Win32 restore
+ GUI. Fixes bug #1065.
+- Update Win32 wxWidgets to latest version.
+- Attempt to do correct handling of Win32 mount points. Should
+ fix bug #1046.
+- Add const to AIX prototype for initgroups()
+- Undo bug #1047 heap overrun fix as it is not correct.
+- Fix to the JobMedia patch, which introduced a new problem.
+- Fix creating first JobMedia record during Migration to include
+ proper index. This caused slow restores of migrated jobs.
+- Fix bug #1047, do not strip paths on symbolic links.
+- Set catalog backup database and user name from values specified on
+ the ./configure line.
+- Apply patch to correct bug #1031, about wrong pool source information
+ in job report.
+
+Version 2.2.8 is a bug fix to version 2.2.7:
+- It fixes bugs: 1036, 1033(doc), 1028, 1040, 1045(doc), 1030,
+ 1042(partially), and possibly bugs 1018 and 1032.
+ Bugs 1018 and 1032 involve problems with multiple-drive autochangers,
+ and are difficult to reproduce.
+ See the ChangeLog for more details.
+
+Version 2.2.7 has several new features and several important bug fixes
+ since version 2.2.6:
+- It fixes bugs: 1009, 1022, 1024, 1019, 1012, 1021, 1020
+ 1007, 1008. For more details, please see the technotes-2.1 file.
+- Fixed a seg fault reported by Frank Sweetser that depended on
+ exact path lengths, but the problem was in bsnprintf.c
+- Double quoting include filenames (@xxx) in Bacula conf files is now
+ possible, thanks to a patch by Michael Stapelberg.
+- You can pipe input to include filenames (@|prog) by using a vertical
+ bar, thanks to the above patch.
+- A daylight savings time bug in the Win32 bsmpt was fixed by a patch from
+ Nerijus Baliunas.
+- Marc Cousins submitted a patch that permits building the PostgreSQL
+ driver with version 8.3.
+- The configure option --archivedir has been changed to --with-archivedir
+
+Version 2.2.6 is a minor bug fix release to version 2.2.5
+- It fixes bugs: #1003, 942, 982, 990(response only), 991,
+ 993, 986, 976.
+- Fix bat crash wen it cannot connect to Director.
+- Fix joblist failure bug in bat.
+
+Version 2.2.5 is a major bug fix release to version 2.2.4
+- It fixes the following bugs: #961, 962, 963, 969, 968, 960,
+ 964, (possibly 935 and 903), 953, 953, 967, 966, 965, 954,
+ 957, 908, 958, and 955.
+- It also improves listing performance problems in bat pointed
+ out by Chris Howells.
+
+Version 2.2.4 is a minor bug fix release to version 2.2.3
+- Possible fix for authorization problems bug #953.
+- Possible fix for bug #908.
+- Add waits to multiple exit detection code to try to force pid
+ file to always be deleted.
+- Restore good dev.tar.gz to rescue set appropriate binary property.
+ This fixes bug #950.
+- Fix seg fault in error exit of acquire_for_read after unsuccessfully
+ trying to switch drives by checking for blocking before unblocking.
+ Fixes bug #906.
+- Cancel storage daemon in all cases where FD reports error. This
+ should fix virtually all cases of bug #920 and will ensure that Devices
+ are released as soon as possible.
+- Fix error message that was clobbered when Dir tells SD it does not
+ have write permission on Volume. This should fix a minor point
+ in bug #942, but not the main problem.
+- Fix migration code to get correct Volume name with multiple volumes
+ by skipping |. Fixes bug #936.
+- Implement patch supplied by Landon to fix bug #944 where using
+ TLS with bconsole uses 99+% of the CPU.
+- Fix bug #946 about "bacula-dir -t" which doesn't works
+ as expected.
+- Using "m" in bconsole will show messages as in prior versions
+ and not memory usage.
+
+- Note, you need GTK >= 2.10 to be able to link the Tray Monitor
+ program.
+
+Version 2.2.3 is a critical bug fix release to version 2.2.2
+- Fix bug #935, and possibly also bug #903 where files were not
+ restored. MediaId was not properly set in JobMedia record after
+ a Volume change. This bug is known to affect all versions from
+ 2.0.0 on, and probably versions prior to that. A detailed analysis
+ of the bug can be found at:
+
+ http://www.bacula.org/downloads/bug-395.txt
+
+- Add ./configure search in qwt-qt4 for qwt package
+- Apply Martin Simmons patch that should turn off the new API usage
+ when batch insert is turned off allowing building on older
+ PostgreSQLs.
+- Note, you need GTK >= 2.10 to be able to link the Tray Monitor
+ program.
+
+Version 2.2.2 is a minor bug fix release to 2.2.1
+- Detect if new PosgreSQL batch insert API is present.
+- Correct incorrect mempool call causing Director crash on older
+ systems that do not have va_copy().
+- Update spec files for 2.2.1 release
+
+Version 2.2.1 is mainly a minor bug fix release to version 2.2.0,
+ the main changes since 2.2.0 are:
+- Fixed bugs #921, 930, and 923.
+- More portable timezone offset in bsmtp thaks to Attila Fülöp.
+- Fix several bat issues.
+- Use GTK+ calls instead of egg files in tray-monitor.
+- Win32 service routines rewritten
+- Updated projects file
+Please see the ChangeLog for details.
+
+Notes on 2.2.0 release follow:
+
+Areas requiring caution or testing:
+- You must have the thread safe version of MySQL client libraries loaded
+ to build with MySQL enabled.
+- Volumes are pruned only when absolutely necessary -- this may cause
+ your database to grow compared to prior Bacula versions.
+- Solaris door and even port files are no longer restored (equivalent
+ to what we do with sockets).
+- SQLite is no longer supported for Solaris -- it fails too often with
+ bus errors. SQLite3 should work on Solaris.
+- The default setting for SQLite3 is now 'PRAGMA synchronous=OFF'.
+ This makes it run 30 times faster, but increases the possiblity
+ of a corrupted database if your server shuts down unexpectedly.
+ The default behavior can be changed in src/version.h
+- Restore on Win32, and in particular on Vista is untested. Please
+ test before relying on it. It should backup and restore reparse
+ points.
+- Win32 servers are untested, and very likely not to work.
+
+The major new features are:
+- Much faster insertion of attributes (somewhere around 10 times),
+ many thanks to Eric Bollengier and Marc Cousin.
+- First release of bat (Bacula Administration Tool). Note to build