-- Heartbeat between daemons.
-- Fix Dir heartbeat in restore and verify vol. Be sure to make
- bnet_recv() ignore BNET_HEARTBEAT.
-- Implement HEART_BEAT while SD waiting for tapes.
-- Include RunBeforeJob and RunAfterJob output in the message
- stream.
-- Change M_INFO to M_RESTORED for all restored files.
-- Fix command prompt in gnome-console by checking on Ready.
-- Merge SQLite, MySQL, and Rel spec into a single file.
-- Fix config of "console"
-- Check if cancel works with FD (fixed).
-- Properly configure console and gconsole (currently for source not
- configured for installation).
-- Error labeling tape from console gets Jmsg error because of no Job.
-- Test and implement get_pint and get_yesno.
-- Implement global with DB name and add to btraceback.gdb
-- Remove subsysdir from conf files (used only in autostart scripts).
-- Fix the following:
- rufus-dir: Max configured use duration exceeded. Marking Volume "MatouBackup" as Used.
- rufus-sd: Volume "" previously written, moving to end of data.
- rufus-sd: Matou.2003-05-10_10.39.18 Error: I canot write on this volume because:
- The number of files mismatch! Volume=1 Catalog=0
- rufus-sd: Matou.2003-05-10_10.39.18 Error: askdir.c:155 NULL Volume name. This shouldn't happen!!!
-- Shell character expansion is failing occassionally.
-- Add a section to the doc on Manual cycling of Volumes.
-- Check if Job/File retentions apply to multivolume jobs.
-- Fix missing casette in autoloader during read:
- 14-May-2003 14:41 undef-sd: RestoreFiles.2003-05-14_14.41.00 Warning: acquire.c:106 Volume name mismatch. Wanted TestVolume0005 got TestVolume0010
- 14-May-2003 14:41 undef-sd: 3301 Issuing autochanger "loaded" command.
- 14-May-2003 14:41 undef-sd: 3302 Issuing autochanger "unload" command.
- 14-May-2003 14:42 undef-sd: 3303 Issuing autochanger "load slot 1" command.
- 14-May-2003 14:42 undef-sd: 3304 Autochanger "load slot 1" status is OK.
- 14-May-2003 14:42 undef-sd: RestoreFiles.2003-05-14_14.41.00 Warning: acquire.c:106 Volume name mismatch. Wanted TestVolume0005 got TestVolume0009
- 14-May-2003 14:42 undef-sd: 3301 Issuing autochanger "loaded" command.
- 14-May-2003 14:42 undef-sd: RestoreFiles.2003-05-14_14.41.00 Warning: acquire.c:106 Volume name mismatch. Wanted TestVolume0005 got TestVolume0009
- 14-May-2003 14:42 undef-sd: 3301 Issuing autochanger "loaded" command.
- 14-May-2003 14:42 undef-sd: RestoreFiles.2003-05-14_14.41.00 Warning: acquire.c:106 Volume name mismatch. Wanted TestVolume0005 got TestVolume0009
- 14-May-2003 14:42 undef-sd: 3301 Issuing autochanger "loaded" command.
- 14-May-2003 14:42 undef-sd: RestoreFiles.2003-05-14_14.41.00 Warning: acquire.c:106 Volume name mismatch. Wanted TestVolume0005 got TestVolume0009
- 14-May-2003 14:42 undef-sd: 3301 Issuing autochanger "loaded" command.
- 14-May-2003 14:42 undef-sd: RestoreFiles.2003-05-14_14.41.00 Fatal error: acquire.c:129 Too many errors trying to mount device "/dev/nrsa0".
- 14-May-2003 14:42 undef-dir: Bacula 1.31 (12May03): 14-May-2003 14:42
-- Fix problem reported by Christopher McCurdy <cmccurdy@eecis.udel.edu>
- xeon-fd: Could not stat c:/Documents and Settings/All
- Users/Application Data/Humc:\Documents and Settings\All User98_AIX.kbf:
- ERR=No such file or directory
- Cannot reproduce.
-- The following Re-read last block at EOT failed. ERR=block.c:523 Read zero bytes on device /dev/nrsa0.
- undef-sd: block.c:523 Read zero bytes on device /dev/nrsa0.
- apparently masks the standard EOM message.
-- BSD (probably) does not have strtoll()
-- BSD does not have ioctl() MTEOM
-- BSD defines a number of MT_xxx variables which conflict
- with those defined by Bacula.
-- Make default duration days if no qualifier (e.g. s) is specified.
-- BSDI fix finding gcc version
-- When the FD errs (e.g. disk full) have a more graceful shutdown.
-- Make sure Bacula prunes/purges canceled and failed jobs too and all
- jobs with zero JobFiles.
-- Implement Volume name checking.
-- Document what characters can go into Volume names.
-- Getting the following on all directories on Win32
- 19-May-2003 01:14 tibs-fd: Could not access c:/cygwin/home/kern/rxvt: ERR=Permission denied
-- Cancellation caused JobMedia error:
- babylon5-dir: Last FULL backup time not found. Doing FULL backup.
- babylon5-dir: Start Backup JobId 416, Job=Zocalo_Save.2003-05-19_02.15.06
- babylon5-sd: End of media on Volume VXA-V17-Inc-001 Bytes=31,982,900,672 Blocks=495,781.
- babylon5-sd: Job Zocalo_Save.2003-05-19_02.15.06 waiting. Cannot find any appendable volumes.
- babylon5-sd: Someone woke me up, but I cannot find any appendable volumes
- for Job=Zocalo_Save.2003-05-19_02.15.06.
- babylon5-sd: Zocalo_Save.2003-05-19_02.15.06 Fatal error: Job
- Zocalo_Save.2003-05-19_02.15.06 canceled while waiting for mount on
- Storage Device "Ecrix_VXA-1".
- babylon5-sd: Zocalo_Save.2003-05-19_02.15.06 Fatal error: Cannot fixup device
- error. Job Zocalo_Save.2003-05-19_02.15.06 canceled while waiting for
- mount on Storage Device "Ecrix_VXA-1".
-
- babylon5-dir: Zocalo_Save.2003-05-19_02.15.06 Error: Catalog error creating
- JobMedia record. sql_create.c:125 Create JobMedia failed. Record already
- exists.
- babylon5-sd: Zocalo_Save.2003-05-19_02.15.06 Error: Error creating JobMedia
- record: 1991 Update JobMedia error
-
- babylon5-sd: Zocalo_Save.2003-05-19_02.15.06 Error: askdir.c:158 NULL Volume
- name. This shouldn't happen!!!
- zocalo-fd: Zocalo_Save.2003-05-19_02.15.06 Error: bnet.c:310 Write error
- sending to Storage daemon:babylon5:9103: ERR=Broken pipe
-- Volume names with spaces get jammed into the catalog with 0x1
- i.e. the SD bashes the Volume but they are not unbased by Dir.
- jerom-dir: MonthlySave.2003-05-10_17.12.01 Error: Unable to get Media
- record for Volume Tape^A1: ERR=sql_get.c:788 Media record for Volume
- "Tape^A1" not found.
- jerom-sd: MonthlySave.2003-05-10_17.12.01 Error: Error updating Volume
- Info: 1991 Catalog Request failed: sql_get.c:788 Media record for Volume
- "Tape^A1" not found.
-- ChangeServiceConfig2A does not exist on WinNT (ADVAPI32.DLL).
-- Fix "access not allowed" for backup of files on WinXP.
-- Check for existence of all new Win32 API's. See LoadLibrary in
- winservice.cpp
-- Count errors during restore and print them in the Job report.
-- Bug: fix access problems on files restored on WinXP.
-- Put system type returned by FD into catalog.
-- Finish WIN32_DATA stream code (bextract, check if can handle stream)
-- Make SD keep track of Files, Bytes during restore.
-- If you enter the userid by hand for restore, you get:
- Enter JobId(s), comma separated, to restore: 74
- You have selected the following JobId: 74
- Building directory tree for JobId 74 ...
- 134645140 items inserted into the tree and marked for extraction.
-- Add SDWriteSeqNo to SD, and probably Read on FD side.
-- If bootstrap is non-zero for restore, do not show JobId in the
- OK to run? (yes/mod/no): list.
-- When all cassettes in magazine are used, got:
- 22-May-2003 18:24 undef-sd: 3304 Autochanger "load slot 1" status is OK.
- 22-May-2003 18:24 undef-sd: NightlySave.2003-05-22_14.08.16 Warning: mount.c:245 Director wanted Volume "TestVolume0009".
- Current Volume "TestVolume0005" not acceptable because:
- 1998 Volume "TestVolume0005" not Append or Recycle.
- 22-May-2003 18:24 undef-sd: NightlySave.2003-05-22_14.08.16 Error: Autochanger Volume "TestVolume0009" not found in slot 1.
- Setting slot to zero in catalog.
- 22-May-2003 18:24 undef-sd: Please mount Volume "TestVolume0009" on Storage Device "ARCHIVE 4586" for Job NightlySave.2003-05-22_14
- .08.16
- Use "mount" command to release Job.
- 22-May-2003 19:24 undef-sd: Please mount Volume "TestVolume0009" on Storage Device "ARCHIVE 4586" for Job NightlySave.2003-05-22_14
- .08.16
- Use "mount" command to release Job.
-- Don't zero the Slot when the wrong volume is found -- simply ask
- the operator.
-- Implement MTIOCERRSTAT on FreeBSD to clear tape error conditions.
-- Shell expansion fails for working_directory in SD from time to time.
-- File the Automatically selected: xxx
- to say Automatically selected Pool: xxx
-- Default duration with no qualifier is sec should be 1 day
-- zap sd_auth_key in SD after FD connection.
-- Find a solution for the multiple FileSet problem (when it is changed). Add date?
-- Look at Python for a Bacula scripting language -- www.python.org
-- When Marking a file in Restore that is a hard link, also
- mark the link so that the data will be reloaded.
-- Emergency restore info:
- - Backup Bacula
- - Backup working directory
- - Backup Catalog
-- Why don't we get an error message from Win32 FD when bootstrap
- file cannot be created for restore command?
-- Fix Win2000 error with no messages during startup.
-- Make restore more robust in counting error and not immediately bailing
- out. Also print error message once, but try to continue.
-- Add code to check that blocks are sequential on restore.
-- Remove "rufus" and such references from regress.
-- No READLINE_SRC if found in alternate directory.
-- If ./btape is called without /dev, assume argument is a Storage resource name.
-- Find general solution for sscanf size problems (as well as sprintf. Do at run time?
-- Bytes restored is wrong.
-- The "List last 20 Jobs run" doesnt work correctly in restore.
- It doesnt show the last 20 jobs , but some older ones.
-- Fix Verify VolumeToCatalog to use BSRs -- it is broken.
-- Implement Release Storage=xxx
-- Fix restore on Win95/98
-- Remove the Jmsg() in sql_find.c:102 or only print on hard error.
-- Implement FileSet VolIndex -- done, but must update old records.
-- Check this below from Phil.
- This was SD reported data rather than FD data!
- > When the job was done, Bacula reported 11084 files restored:
- >
- > JobId: 527
- > Job: Zocalo_Restore.2003-06-05_16.42.01
- > Client: Zocalo
- > Start time: 05-Jun-2003 16:42
- > End time: 06-Jun-2003 01:21
- > Files Restored: 11,084
- > Bytes Restored: 65,474,772
- > Rate: 2.1 KB/s
- > FD termination status: OK
- > Termination: Restore OK
- >
- > when it should probably have reported 11084 files scanned, 250 restored.
- > The bytes restored count looks about right.
- >
-- Should Bacula make an Append tape as Purged when purging?
-- Use switch() in backup.c and restore.c in FD instead of giant if statement.
-- If during a restore, a hard linked file already exists (on option), delete
- the file and re-link it. This is to avoid the possibility that the
- user had re-linked the file between the backup and the restore.
- Do lstat() to see if it is already properly linked.
- Same for symlinked file.
- Make sure ifnewer, ifolder, never, ... apply correctly.
-- Flag so that no connect does not error, and Reschedule a job.
-- Implement "Reschedule OnError=yes interval=nnn times=xxx"
-- That restoring a hard link that already exists works correctly.
- Same for soft link.
-- Make Pool resource handle Counter resources.
-- Fix first block number after label to be zero instead of 1 (reset after label).
-- Grep for Backup OK in regression script.
-- Do NOT reuse same JobId if tape written.
-- Implement non-blocking writes and bsock->terminate in heartbeat
- thread, or set it in status.c cancel (used pthread_kill() instead of
- non-blocking I/O.
-- Add restore to specific date.
-- Instrument use_count on DEVICE packets and ensure that the device is
- being close()ed at the appropriate time.
-- Test long path names (>64 chars) in Windows -- crashes FD?
-- Implement fast block rejection: match_bsr_block().
-- Complain if record dropped in bnet_recv because too long.
-- Test multiple simultaneous Volumes
-- Document recycling algorithm.
-- Make Restore report an error if FD or SD term codes are not OK.
-- To link with mysqlclient_r may require -lssl -lcrypto
-- Document Heart beat code
-- Non-fatal errors are not correct counting attribs.c:277
-- Check that Block number in JobMedia are correct.
-- The bsr for Dan's job has file indexes covering the whole range rather
- than only the range contained on the volume.
- Constrain FileIndex to be within range for Volume.
-- Pass prefix_links to FD.
-- Fix restore list of volumes if Volume not selected.
-- Complete (or turn off) the command line code in update.
-- Testing Tibs job erred and hung director on Storage resource. This was
- because there were a whole pile of jobs hanging around in the SD
- waiting for a connection from the FD that was never coming.
-- Possibly update all client records at startup.
-- Listing of Win32 restored files has ??????? for user.
-- In Win portable restore the directory is not create
- 27-Jun-2003 16:52 tibs-fd: kernsrestore.2003-06-27_16.52.20 Error:
- create_file.c:175 Could not create
- /tmp/bacula-restores/cygwin/home/kern/bacula/k/src/dird/dird_conf.o: 0
- ERR=The system cannot find the path specified.
-- Finish Windows implementation (add setting of correct type on restore,
- add Portable Data Format flag).
-- Document portable=yes
-- Document c:/working directory better than /working directory.
-- Document run "yes".
-- Document update volume: jobid, current, before, all
-- Document that bscan does not work with multiple simultaneous jobs.
-- Update Automatic Volume Labeling in disk.wml
-- Figure out how to handle DHCP IP addresses -- use dynamic DNS.
-- Add OS, GCC version to traceback output.
-- Implement a Recycle or Prune Current Volume (as from Nic Bellamy),
- possibly implement Prune Oldest Volume.
-- Backup on havana gave:
- Total Bytes Read=4,629,249,084,728,272,628 Blocks Read=0 Bytes/block=134,735,604
-- Move JobFiles and JobBytes to SD rather than FD -- more correct.
-- Test of last block is correct in JobMedia when splitting file
- over two volumes.
-- Doc win32 table from Marc Brueckner der Megauser
-- Fix default time in seconds without qualifier -- bacula-dir.conf
-- Add Nic Bellamy's backup scheme.
-- Document using multiple Pools for daily rotating tapes.
-- Check if Incremental is working correctly when it looks for the previous Job
- (Phil's problem).
+- Implement new alist in FileSet scanning.
+- bls should continue reading even if it finds Win32 data on the tape.
+ The error should be Warning rather the Error.
+- Add user configurable timeout for connecting to SD.
+- Unsaved Flag in Job record (use JobMissingFiles).
+- Base Flag in Job record.
+- Configure mtx-changer to have correct path to mtx.
+- Add all command line arguments to "update", e.g. slot=nn volStatus=append, ...
+- Make some way so that if a machine is skipped because it is not up
+ that Bacula will continue retrying for a specified period of time --
+ periodically.
+- Implement all command line args on run.
+- Implement command line "restore" args.
+- Implement "restore current select=no"
+- Restore file modified before date
+- Restore -- do nothing but show what would happen
+- Add estimate to Console commands
+- Use read_record.c in SD code.
+- Fix read_record to handle multiple sessions.
+- Tip from Steve Allam
+ mt -f /dev/nst0 defblksize 0
+- Document "status" in the console.
+- Document driving console from shell script.
+- Write JobMedia records with max file size is reached on tape.
+- Handle the case of multiple JobMedia records pending (i.e. the
+ thread is slow and multiple situations requiring a JobMedia
+ record occur).
+- Do performance analysis on the restore tree routines.
+- Fix maximum file size (block.c) to generate JobMedia records.
+- Make the default file size 1GB on the tape.
+- Implement forward spacing between files.
+- Add Machine type (Linux/Windows) to Status report for daemons.
+ Look at src/host.h
+- Use repositioning at the beginning of the tape.
+- Do full check the command line args in update (e.g. VolStatus ...).
+- Specify list of files to restore
+- Implement ClientRunBeforeJob and ClientRunAfterJob.
+- Make | and < work on FD side.
+- Check to see if "blocked" is set during restore.
+- Figure out what is interrupting sql command in console.
+- Make new job print warning User Unmounted Tape.
+- Test recycling and purging (code changed in db_find_next_volume and
+ in recycle.c).
+- Document SDConnectTimeout (in FD).
+- Add restore by filename test.
+- Document restore by files.
+- Make variable expansion work correctly.
+- Implement List Volume Job=xxx or List scheduled volumes or Status Director
+- Copy static programs into install directory.
+- Think about changing Storage resource Device record to be
+ SDDeviceName.
+- Add RunBeforeJob and RunAfterJob to the Client program.
+- Need return status on read_cb() from read_records(). Need multiple
+ records -- one per Job, maybe a JCR or some other structure with
+ a block and a record.
+- LabelFormat on tape volume apparently creates the db record but
+ never actually labels the volume.
+- Recycling a volume when two jobs are using it is going to break. Fixed.
+- Document list nextvol and new format status dir.
+- Client files in Win32 with Unix eol conventions doesn't work.
+- Either fix or document that fill command in btape can be
+ compressed enormously by the hardware - a 36GB tape wrote 750GB!
+- Add multiple character duration qualifiers.
+- Require some modifer.
+- Restrict characters permitted in a Resource name, and don't permit
+ duplicate names.
+- Figure out some way to ignore or get past checksum errors in
+ reading.
+- The SD spooling file gets created even if it is not used.
+- Look at Cleaning tape in ua_label.c for media create/update
+- Add regression testing to the manual
+- End time: in job output of rescheduled job is time of first run.
+- Document list nextvol and status output.
+- Separate Dir heartbeat in FD from the SD heartbeat.
+- Fix sparse file handeling so that it always reads a multiple
+ of 512. Currently, it subtracts 8 bytes (for faddr).
+ Kludged with #ifdef for FreeBSD.
+- Document that Volume pruning can delete last Full backup and
+ hence you will not have a valid backup.
+- Clarify the fact that having the Bacula cygwin1.dll loaded
+ is not the same as having cygwin installed.
+- Document that it is safe to use the drive when the lights stop flashing.
+- Document all the status codes JobLevel, JobType, JobStatus.
+- Add GUI interface to manual
+- Combine the 3 places that search run records for the next
+ job. Use find_job_pool() modified in ua_output.c
+- Test connect timeouts.
+- Fix FreeBSD build with tcp_wrapper -- should not have -lnsl
+- Implement fast block rejection.
+- I want to restore by file to some date.
+---- 1.32b released
+- Figure out a way to move Volumes from one pool to another.
+- Implement a RunAfterFailedJob
+- Limit the number of block checksum/header BB01, ... errors printed.
+- If last Full back is purged and an Incremental or Differential remains,
+ Bacula does not promote the Incremental to a Full.
+- Document verify_disk_to_catalog
+- Document delete job command.
+- Document update volume pool and other command line keywords.
+- Add VerifyJob to "run" summary (yes/mod/no) prompt.
+- For listing, eliminate multiple JobIds in restore Jobs listing.
+- Document to start higher priorty jobs before lower ones.
+- suppress "Do not forget to mount the drive!!!" if error
+- Change error message when closing brace left off ...
+- Implement a move Volume from one pool to another.
+- Implement delete Job.
+- Document need to put LabelFormat in quotes.
+- Implement job in VerifyToCatalog
+- Eliminate ua_retention.c (retentioncmd) if possible.
+