-- Save mount point for directories not traversed with onefs=yes.
-- Add seconds to start and end times in the Job report output.
-- if 2 concurrent backups are attempted on the same tape
- drive (autoloader) into different tape pools, one of them will exit
- fatally instead of halting until the drive is idle
-- Update StartTime if job held in Job Queue.
-- Look at www.nu2.nu/pebuilder as a helper for full windows
- bare metal restore. (done by Scott)
-- Fix orphanned buffers:
- Orphaned buffer: 24 bytes allocated at line 808 of rufus-dir job.c
- Orphaned buffer: 40 bytes allocated at line 45 of rufus-dir alist.c
-- Implement Preben's suggestion to add
- File System Types = ext2, ext3
- to FileSets, thus simplifying backup of *all* local partitions.
-- Try to open a device on each Job if it was not opened
- when the SD started.
-- Add dump of VolSessionId/Time and FileIndex with bls.
-- If Bacula does not find the right tape in the Autochanger,
- then mark the tape in error and move on rather than asking
- for operator intervention.
-- Cancel command should include JobId in list of Jobs.
-- Add performance testing hooks
-- Bootstrap from JobMedia records.
-- Implement WildFile and WildDir to solve problem of
- saving only *.doc files.
-- Fix
- Please use the "label" command to create a new Volume for:
- Storage: DDS-4-changer
- Media type:
- Pool: Default
- label
- The defined Storage resources are:
-- Copy Changer Device and Changer Command from Autochanger
- to Device resource in SD if none given in Device resource.
-- 1. Automatic use of more than one drive in an autochanger (done)
-- 2. Automatic selection of the correct drive for each Job (i.e.
- selects a drive with an appropriate Volume for the Job) (done)
-- 6. Allow multiple simultaneous Jobs referencing the same pool write
- to several tapes (some new directive(s) are are probably needed for
- this) (done)
-- Locking (done)
-- Key on Storage rather than Pool (done)
-- Allow multiple drives to use same Pool (change jobq.c DIR) (done).
-- Synchronize multiple drives so that not more
- than one loads a tape and any time (done)
-- 4. Use Changer Device and Changer Command specified in the
- Autochanger resource, if none is found in the Device resource.
- You can continue to specify them in the Device resource if you want
- or need them to be different for each device.
-- 5. Implement a new Device directive (perhaps "Autoselect = yes/no")
- that can allow a Device be part of an Autochanger, and hence the changer
- script protected, but if set to no, will prevent the Device from being
- automatically selected from the changer. This allows the device to
- be directly accessed through its Device name, but not through the
- AutoChanger name.
-#6 Select one from among Multiple Storage Devices for Job
-#5 Events that call a Python program
- (Implemented in Dir/SD)
-- Make sure the Device name is in the Query packet returned.
-- Don't start a second file job if one is already running.
-- Implement EOF/EOV labels for ANSI labels
-- Implement IBM labels.
-- When Python creates a new label, the tape is immediately
- recycled and no label created. This happens when using
- autolabeling -- even when Python doesn't generate the name.
-- Scratch Pool where the volumes can be re-assigned to any Pool.
-- 28-Mar 23:19 rufus-sd: acquire.c:379 Device "DDS-4" (/dev/nst0)
- is busy reading. Job 6 canceled.
-- Remove separate thread for opening devices in SD. On the other
- hand, don't block waiting for open() for devices.
-- Fix code to either handle updating NumVol or to calculate it in
- Dir next_vol.c
-- Ensure that you cannot exclude a directory or a file explicitly
- Included with File.
-#4 Embedded Python Scripting
- (Implemented in Dir/SD/FD)
-- Add Python writable variable for changing the Priority,
- Client, Storage, JobStatus (error), ...
-- SD Python
- - Solicit Events
-- Add disk seeking on restore; turn off seek on tapes.
- stored/match_bsr.c
-- Look at dird_conf.c:1000: warning: `int size'
- might be used uninitialized in this function
-- Indicate when a Job is purged/pruned during restore.
-- Implement some way to turn off automatic pruning in Jobs.
-- Implement a way an Admin Job can prune, possibly multiple
- clients -- Python script?
-- Look at Preben's acl.c error handling code.
-- SD crashes after a tape restore then doing a backup.
-- If drive is opened read/write, close it and re-open
- read-only if doing a restore, and vice-versa.
-- Windows restore:
- data-fd: RestoreFiles.2004-12-07_15.56.42 Error:
- > ..\findlib\../../findlib/create_file.c:275 Could not open e:/: ERR=Der
- > Prozess kann nicht auf die Datei zugreifen, da sie von einem anderen
- > Prozess verwendet wird.
- Restore restores all files, but then fails at the end trying
- to set the attributes of e:
- from failed jobs.- Resolve the problem between Device name and Archive name,
- and fix SD messages.
-- Tell the "restore" user when browsing is no longer possible.
-- Add a restore directory-x
-- Write non-optimized bsrs from the JobMedia and Media records,
- even after Files are pruned.
-- Delete Stripe and Copy from VolParams to save space.
-- Fix option 2 of restore -- list where file is backed up -- require Client,
- then list last 20 backups.
-- Finish implementation of passing all Storage and Device needs to
- the SD.
-- Move test for max wait time exceeded in job.c up -- Peter's idea.
-## Consider moving docs to their own project.
-## Move rescue to its own project.
-- Add client version to the Client name line that prints in
- the Job report.
-- Fix the Rescue CDROM.
-- By the way: on page http://www.bacula.org/?page=tapedrives , at the
- bottom, the link to "Tape Testing Chapter" is broken. It goes to
- /html-manual/... while the others point to /rel-manual/...
-- Device resource needs the "name" of the SD.
-- Specify a single directory to restore.
-- Implement MediaType keyword in bsr?
-- Add a date and time stamp at the beginning of every line in the
- Job report (Volker Sauer).
-- Add level to estimate command.
-- Add "limit=n" for "list jobs"
-- Make bootstrap filename unique.
-- Make Dmsg look at global before calling subroutine.
-- From Chris Hull:
- it seems to be complaining about 12:00pm which should be a valid 12
- hour time. I changed the time to 11:59am and everything works fine.
- Also 12:00am works fine. 0:00pm also works (which I don't think
- should). None of the values 12:00pm - 12:59pm work for that matter.
-- Require restore via the restore command or make a restore Job
- get the bootstrap file.
-- Implement Maximum Job Spool Size
-- Fix 3993 error in SD. It forgets to look at autochanger
- resource for device command, ...
-- 3. Prevent two drives requesting the same Volume in any given
- autochanger, by checking if a Volume is mounted on another drive
- in an Autochanger.
-- Upgrade to MySQL 4.1.12 See:
- http://dev.mysql.com/doc/mysql/en/Server_SQL_mode.html
-- Add # Job Level date to bsr file
-- Implement "PreferMountedVolumes = yes|no" in Job resource.
-## Integrate web-bacula into a new Bacula project with
- bimagemgr.
-- Cleaning tapes should have Status "Cleaning" rather than append.
-- Make sure that Python has access to Client address/port so that
- it can check if Clients are alive.
-- Review all items in "restore".
-- Fix PostgreSQL GROUP BY problems in restore.
-- Fix PostgreSQL sql problems in bugs.
-- After rename
- 04-Jul 13:01 MainSD: Rufus.2005-07-04_01.05.02 Warning: Director wanted Volume
- "DLT-13Feb04".
- Current Volume "DLT-04Jul05" not acceptable because:
- 1997 Volume "DLT-13Feb04" not in catalog.
- 04-Jul 13:01 MainSD: Please mount Volume "DLT-04Jul05" on Storage Device
- "HP DLT 80" (/dev/nst0) for Job Rufus.2005-07-04_01.05.02
-## Create a new GUI chapter explaining all the GUI programs.
-- Make "update slots" when pointing to Autochanger, remove
- all Volumes from other drives. "update slots all-drives"?
- No, this is done by modifying mtx-changer to list what is
- in the drives.
-- Finish TLS implementation.
-- Port limiting -m in iptables to prevent DoS attacks
- could cause broken pipes on Bacula.
+- Make sure that all do_prompt() calls in Dir check for
+ -1 (error) and -2 (cancel) returns.
+- Fix foreach_jcr() to have free_jcr() inside next().
+ jcr=jcr_walk_start();
+ for ( ; jcr; (jcr=jcr_walk_next(jcr)) )
+ ...
+ jcr_walk_end(jcr);
+- A Volume taken from Scratch should take on the retention period
+ of the new pool.
+- Correct doc for Maximum Changer Wait (and others) accepting only
+ integers.
+- Implement status that shows why a job is being held in reserve, or
+ rather why none of the drives are suitable.
+- Implement a way to disable a drive (so you can use the second
+ drive of an autochanger, and the first one will not be used or
+ even defined).
+- Make sure Maximum Volumes is respected in Pools when adding
+ Volumes (e.g. when pulling a Scratch volume).
+- Keep same dcr when switching device ...
+- Implement code that makes the Dir aware that a drive is an
+ autochanger (so the user doesn't need to use the Autochanger = yes
+ directive).
+- Make catalog respect ACL.
+- Add recycle count to Media record.
+- Add initial write date to Media record.
+- Fix store_yesno to be store_bitmask.
+--- create_file.c.orig Fri Jul 8 12:13:05 2005
++++ create_file.c Fri Jul 8 12:13:07 2005
+@@ -195,6 +195,8 @@
+ attr->ofname, be.strerror());
+ return CF_ERROR;
+ }
++ } else if(S_ISSOCK(attr->statp.st_mode)) {
++ Dmsg1(200, "Skipping socket: %s\n", attr->ofname);
+ } else {
+ Dmsg1(200, "Restore node: %s\n", attr->ofname);
+ if (mknod(attr->ofname, attr->statp.st_mode, attr->statp.st_rdev) != 0 && errno != EEXIST) {
+- Add true/false to conf same as yes/no
+- Reserve blocks other restore jobs when first cannot connect to SD.
+- Fix Maximum Changer Wait, Maximum Open Wait, Maximum Rewind Wait to
+ accept time qualifiers.
+- Does ClientRunAfterJob fail the job on a bad return code?
projects / bacula / bacula / blobdiff