+"You must correct this error or Bacula will not work.\n"
+"Some systems, e.g. OpenBSD, require you to set\n"
+" Use MTIOCGET= no\n"
+"in your device resource. Use with caution.\n"
+msgstr ""
+
+#: src/stored/btape.c:1737
+msgid ""
+"\n"
+"Append test failed. Attempting again.\n"
+"Setting \"Hardware End of Medium = no\n"
+" and \"Fast Forward Space File = no\n"
+"and retrying append test.\n"
+"\n"
+msgstr ""
+
+#: src/stored/btape.c:1745
+msgid ""
+"\n"
+"\n"
+"It looks like the test worked this time, please add:\n"
+"\n"
+" Hardware End of Medium = No\n"
+"\n"
+" Fast Forward Space File = No\n"
+"to your Device resource in the Storage conf file.\n"
+msgstr ""
+
+#: src/stored/btape.c:1752
+msgid ""
+"\n"
+"\n"
+"That appears *NOT* to have corrected the problem.\n"
+msgstr ""
+
+#: src/stored/btape.c:1757
+msgid ""
+"\n"
+"\n"
+"It looks like the append failed. Attempting again.\n"
+"Setting \"BSF at EOM = yes\" and retrying append test.\n"
+msgstr ""
+
+#: src/stored/btape.c:1762
+msgid ""
+"\n"
+"\n"
+"It looks like the test worked this time, please add:\n"
+"\n"
+" Hardware End of Medium = No\n"
+" Fast Forward Space File = No\n"
+" BSF at EOM = yes\n"
+"\n"
+"to your Device resource in the Storage conf file.\n"
+msgstr ""
+
+#: src/stored/btape.c:1773
+msgid ""
+"\n"
+"Append test failed.\n"
+"\n"
+"\n"
+"!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!\n"
+"Unable to correct the problem. You MUST fix this\n"
+"problem before Bacula can use your tape drive correctly\n"
+"\n"
+"Perhaps running Bacula in fixed block mode will work.\n"
+"Do so by setting:\n"
+"\n"
+"Minimum Block Size = nnn\n"
+"Maximum Block Size = nnn\n"
+"\n"
+"in your Storage daemon's Device definition.\n"
+"nnn must match your tape driver's block size, which\n"
+"can be determined by reading your tape manufacturers\n"
+"information, and the information on your kernel dirver.\n"
+"Fixed block sizes, however, are not normally an ideal solution.\n"
+"\n"
+"Some systems, e.g. OpenBSD, require you to set\n"
+" Use MTIOCGET= no\n"
+"in your device resource. Use with caution.\n"
+msgstr ""
+
+#: src/stored/btape.c:1795
+msgid ""
+"\n"
+"The above Bacula scan should have output identical to what follows.\n"
+"Please double check it ...\n"
+"=== Sample correct output ===\n"
+"1 block of 64448 bytes in file 1\n"
+"End of File mark.\n"
+"2 blocks of 64448 bytes in file 2\n"
+"End of File mark.\n"
+"3 blocks of 64448 bytes in file 3\n"
+"End of File mark.\n"
+"1 block of 64448 bytes in file 4\n"
+"End of File mark.\n"
+"Total files=4, blocks=7, bytes = 451,136\n"
+"=== End sample correct output ===\n"
+"\n"
+"If the above scan output is not identical to the\n"
+"sample output, you MUST correct the problem\n"
+"or Bacula will not be able to write multiple Jobs to \n"
+"the tape.\n"
+"\n"
+msgstr ""
+
+#: src/stored/btape.c:1838
+#, c-format
+msgid "Bad status from fsf. ERR=%s\n"
+msgstr ""
+
+#: src/stored/btape.c:1842
+msgid "Forward spaced 1 file.\n"
+msgstr ""
+
+#: src/stored/btape.c:1845
+#, c-format
+msgid "Forward spaced %d files.\n"
+msgstr ""
+
+#: src/stored/btape.c:1864
+msgid "Forward spaced 1 record.\n"
+msgstr ""
+
+#: src/stored/btape.c:1867
+#, c-format
+msgid "Forward spaced %d records.\n"
+msgstr ""
+
+#: src/stored/btape.c:1912
+#, c-format
+msgid "Wrote one record of %d bytes.\n"
+msgstr ""
+
+#: src/stored/btape.c:1914
+msgid "Wrote block to device.\n"
+msgstr ""
+
+#: src/stored/btape.c:1928
+msgid "Enter length to read: "
+msgstr ""
+
+#: src/stored/btape.c:1933
+msgid "Bad length entered, using default of 1024 bytes.\n"
+msgstr ""
+
+#: src/stored/btape.c:1942
+#, c-format
+msgid "Read of %d bytes gives stat=%d. ERR=%s\n"
+msgstr ""
+
+#: src/stored/btape.c:1965 src/stored/btape.c:2014
+#, c-format
+msgid "End of tape\n"
+msgstr ""
+
+#: src/stored/btape.c:1970
+#, c-format
+msgid "Starting scan at file %u\n"
+msgstr ""
+
+#: src/stored/btape.c:1977
+#, c-format
+msgid "Bad status from read %d. ERR=%s\n"
+msgstr ""
+
+#: src/stored/btape.c:1980 src/stored/btape.c:1994 src/stored/btape.c:2058
+#: src/stored/btape.c:2070 src/stored/btape.c:2083 src/stored/btape.c:2099
+#, c-format
+msgid "1 block of %d bytes in file %d\n"
+msgstr ""
+
+#: src/stored/btape.c:1983 src/stored/btape.c:1997 src/stored/btape.c:2061
+#: src/stored/btape.c:2073 src/stored/btape.c:2086 src/stored/btape.c:2102
+#, c-format
+msgid "%d blocks of %d bytes in file %d\n"
+msgstr ""
+
+#: src/stored/btape.c:2005 src/stored/btape.c:2077
+#, c-format
+msgid "End of File mark.\n"
+msgstr ""
+
+#: src/stored/btape.c:2026 src/stored/btape.c:2130
+#, c-format
+msgid "Total files=%d, blocks=%d, bytes = %s\n"
+msgstr ""
+
+#: src/stored/btape.c:2090
+#, c-format
+msgid "Short block read.\n"
+msgstr ""
+
+#: src/stored/btape.c:2093
+#, c-format
+msgid "Error reading block. ERR=%s\n"
+msgstr ""
+
+#: src/stored/btape.c:2117
+#, c-format
+msgid ""
+"Block=%u file,blk=%u,%u blen=%u First rec FI=%s SessId=%u SessTim=%u Strm=%s "
+"rlen=%d\n"
+msgstr ""
+
+#: src/stored/btape.c:2139
+#, c-format
+msgid "Device status: %u. ERR=%s\n"
+msgstr ""
+
+#: src/stored/btape.c:2171
+#, c-format
+msgid ""
+"\n"
+"This command simulates Bacula writing to a tape.\n"
+"It requires either one or two blank tapes, which it\n"
+"will label and write.\n"
+"\n"
+"If you have an autochanger configured, it will use\n"
+"the tapes that are in slots 1 and 2, otherwise, you will\n"
+"be prompted to insert the tapes when necessary.\n"
+"\n"
+"It will print a status approximately\n"
+"every 322 MB, and write an EOF every %s. If you have\n"
+"selected the simple test option, after writing the first tape\n"
+"it will rewind it and re-read the last block written.\n"
+"\n"
+"If you have selected the multiple tape test, when the first tape\n"
+"fills, it will ask for a second, and after writing a few more \n"
+"blocks, it will stop. Then it will begin re-reading the\n"
+"two tapes.\n"
+"\n"
+"This may take a long time -- hours! ...\n"
+"\n"
+msgstr ""
+
+#: src/stored/btape.c:2189
+msgid ""
+"Do you want to run the simplified test (s) with one tape\n"
+"or the complete multiple tape (m) test: (s/m) "
+msgstr ""
+
+#: src/stored/btape.c:2192
+msgid "Simple test (single tape) selected.\n"
+msgstr ""
+
+#: src/stored/btape.c:2195
+msgid "Multiple tape test selected.\n"
+msgstr ""
+
+#: src/stored/btape.c:2237
+msgid "Wrote Start of Session label.\n"
+msgstr ""
+
+#: src/stored/btape.c:2256
+#, c-format
+msgid "%s Begin writing Bacula records to tape ...\n"
+msgstr ""
+
+#: src/stored/btape.c:2258
+#, c-format
+msgid "%s Begin writing Bacula records to first tape ...\n"
+msgstr ""
+
+#: src/stored/btape.c:2284
+msgid "Flush block failed.\n"
+msgstr ""
+
+#: src/stored/btape.c:2298
+#, c-format
+msgid "Wrote block=%u, file,blk=%u,%u VolBytes=%s rate=%sB/s\n"
+msgstr ""
+
+#: src/stored/btape.c:2309
+#, c-format
+msgid "%s Flush block, write EOF\n"
+msgstr ""
+
+#: src/stored/btape.c:2318
+msgid "Wrote 1000 blocks on second tape. Done.\n"
+msgstr ""
+
+#: src/stored/btape.c:2323
+msgid "Not OK\n"
+msgstr ""
+
+#: src/stored/btape.c:2347
+msgid "Job canceled.\n"
+msgstr ""
+
+#: src/stored/btape.c:2358
+msgid "Set ok=false after write_block_to_device.\n"
+msgstr ""
+
+#: src/stored/btape.c:2362
+msgid "Wrote End of Session label.\n"
+msgstr ""
+
+#: src/stored/btape.c:2386
+#, c-format
+msgid "Wrote state file last_block_num1=%d last_block_num2=%d\n"
+msgstr ""
+
+#: src/stored/btape.c:2390
+#, c-format
+msgid "Could not create state file: %s ERR=%s\n"
+msgstr ""
+
+#: src/stored/btape.c:2401
+#, c-format
+msgid ""
+"\n"
+"\n"
+"%s Done filling tape at %d:%d. Now beginning re-read of tape ...\n"
+msgstr ""
+
+#: src/stored/btape.c:2404
+#, c-format
+msgid ""
+"\n"
+"\n"
+"%s Done filling tapes at %d:%d. Now beginning re-read of first tape ...\n"
+msgstr ""
+
+#: src/stored/btape.c:2410
+msgid "do_unfill failed.\n"
+msgstr ""
+
+#: src/stored/btape.c:2415
+#, c-format
+msgid "%s: Error during test.\n"
+msgstr ""
+
+#: src/stored/btape.c:2450
+msgid ""
+"\n"
+"The state file level has changed. You must redo\n"
+"the fill command.\n"
+msgstr ""
+
+#: src/stored/btape.c:2457
+#, c-format
+msgid ""
+"\n"
+"Could not find the state file: %s ERR=%s\n"
+"You must redo the fill command.\n"
+msgstr ""
+
+#: src/stored/btape.c:2523
+msgid "Mount first tape. Press enter when ready: "
+msgstr ""
+
+#: src/stored/btape.c:2539
+msgid "Rewinding.\n"
+msgstr ""
+
+#: src/stored/btape.c:2544
+#, c-format
+msgid "Reading the first 10000 records from %u:%u.\n"
+msgstr ""
+
+#: src/stored/btape.c:2548 src/stored/btape.c:2616
+#, c-format
+msgid "Reposition from %u:%u to %u:%u\n"
+msgstr ""
+
+#: src/stored/btape.c:2551 src/stored/btape.c:2603 src/stored/btape.c:2619
+#, c-format
+msgid "Reposition error. ERR=%s\n"
+msgstr ""
+
+#: src/stored/btape.c:2554
+#, c-format
+msgid "Reading block %u.\n"
+msgstr ""
+
+#: src/stored/btape.c:2556 src/stored/btape.c:2608 src/stored/btape.c:2624
+#, c-format
+msgid "Error reading block: ERR=%s\n"
+msgstr ""
+
+#: src/stored/btape.c:2561
+msgid ""
+"\n"
+"The last block on the tape matches. Test succeeded.\n"
+"\n"
+msgstr ""
+
+#: src/stored/btape.c:2564
+msgid ""
+"\n"
+"The last block of the first tape matches.\n"
+"\n"
+msgstr ""
+
+#: src/stored/btape.c:2588
+msgid "Mount second tape. Press enter when ready: "
+msgstr ""
+
+#: src/stored/btape.c:2601
+#, c-format
+msgid "Reposition from %u:%u to 0:1\n"
+msgstr ""
+
+#: src/stored/btape.c:2606 src/stored/btape.c:2622
+#, c-format
+msgid "Reading block %d.\n"
+msgstr ""
+
+#: src/stored/btape.c:2612
+msgid ""
+"\n"
+"The first block on the second tape matches.\n"