+#~ msgid "!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!\n"
+#~ msgstr "!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!\n"
+
+#~ msgid "WARNING!!!! The Internal Database is NOT OPERATIONAL!\n"
+#~ msgstr "ATTENTION !!!! La base interne n'est pas OPÉRATIONNELLE !\n"
+
+#~ msgid "You should use SQLite, PostgreSQL, or MySQL\n"
+#~ msgstr "Vous devez utiliser SQLite, PostgreSQL, ou MySQL\n"
+
+#, fuzzy
+#~ msgid "Unable to open Catalog DB control file %s: ERR=%s\n"
+#~ msgstr "Impossible de créer le fichier bootstrap %s. ERR=%s\n"
+
+#, fuzzy
+#~ msgid "Error reading catalog DB control file. ERR=%s\n"
+#~ msgstr ""
+#~ "Erreur pendant l'écriture des données vers le fichier de spool. ERR=%s\n"
+
+#, fuzzy
+#~ msgid "Could not connect to storage daemon"
+#~ msgstr "Impossible de se connecter au Storage daemon.\n"
+
+#, fuzzy
+#~ msgid "Job %s marked to be canceled.\n"
+#~ msgstr "Le job va être marqué annulé.\n"
+
+#, fuzzy
+#~ msgid ""
+#~ "cancel [jobid=<number> job=<job-name> ujobid=<unique-jobid>] -- \n"
+#~ " cancel a job"
+#~ msgstr "cancel [<jobid=nnn> | <job=name>] -- annulation d'un job"
+
+#, fuzzy
+#~ msgid "delete [volume=<vol-name> pool=<pool-name> job jobid=<id>]"
+#~ msgstr "delete [pool=<pool-name> | media volume=<volume-name>]"
+
+#~ msgid "disable <job=name> -- disable a job"
+#~ msgstr "disable <job=name> -- désactive un job"
+
+#~ msgid "enable <job=name> -- enable a job"
+#~ msgstr "enable <job=name> -- active un job"
+
+#, fuzzy
+#~ msgid ""
+#~ "list [pools | jobs | jobtotals | media <pool=pool-name> | \n"
+#~ " files <jobid=nn> | copies <jobid=nn>]; from catalog"
+#~ msgstr ""
+#~ "list [pools | jobs | jobtotals | media <pool=pool-name> | files "
+#~ "<jobid=nn>] -- depuis le catalogue"
+
+#~ msgid "messages"
+#~ msgstr "messages"
+
+#, fuzzy
+#~ msgid "use <database-name> -- catalog xxx"
+#~ msgstr "utilise le catalogue xxx"
+
+#, fuzzy
+#~ msgid "No Client record defined for job %s\n"
+#~ msgstr "Pas d'enregistrement trouvé en base pour : %s\n"
+
+#, fuzzy
+#~ msgid "No FileSet record defined for job %s\n"
+#~ msgstr "Pas de volume trouvé en base pour l'objet %d.\n"
+
+#, fuzzy
+#~ msgid "No Storage resource defined for job %s\n"
+#~ msgstr "Pas d'enregistrement trouvé en base pour : %s\n"
+
+#, fuzzy
+#~ msgid "No Pool resource defined for job %s\n"
+#~ msgstr "La ressource Pool « %s » est introuvable !\n"
+
+#, fuzzy
+#~ msgid "No Catalog resource defined for client %s\n"
+#~ msgstr "Pas d'enregistrement trouvé en base pour : %s\n"
+
+#, fuzzy
+#~ msgid "Folder"
+#~ msgstr "FileSet"
+
+#, fuzzy
+#~ msgid "1 file (%s)"
+#~ msgstr "Nouveau Fichier : %s\n"
+
+#, fuzzy
+#~ msgid "%d files (%s)"
+#~ msgstr "Nouveau Fichier : %s\n"
+
+#, fuzzy
+#~ msgid "1 file selected (%s)"
+#~ msgstr ""
+#~ "\n"
+#~ "1 fichier sélectionne pour la restauration.\n"
+#~ "\n"
+
+#, fuzzy
+#~ msgid "%d files selected (%s)"
+#~ msgstr ""
+#~ "\n"
+#~ "1 fichier sélectionne pour la restauration.\n"
+#~ "\n"
+
+#, fuzzy
+#~ msgid "An error occurred while extracting files."
+#~ msgstr "Entrez le nombre de départ : "
+
+#, fuzzy
+#~ msgid "Command not found."
+#~ msgstr "Commande annulée.\n"
+
+#, fuzzy
+#~ msgid "Command exited abnormally."
+#~ msgstr "Commande annulée.\n"
+
+#, fuzzy
+#~ msgid "Do you want to create a new archive with these files?"
+#~ msgstr ""
+#~ "\n"
+#~ "Voulez vous restaurer tous les fichiers ? (oui|non) : "
+
+#, fuzzy
+#~ msgid "Create _Archive"
+#~ msgstr "Crée"
+
+#, fuzzy
+#~ msgid "Name"
+#~ msgstr "Job échoué.\n"
+
+#, fuzzy
+#~ msgid "Current Location:"
+#~ msgstr "Le slot courant est : %d\n"
+
+#, fuzzy
+#~ msgid "View selected file"
+#~ msgstr ""
+#~ "\n"
+#~ "%u fichiers sélectionnés pour la restauration.\n"
+
+#, fuzzy
+#~ msgid "Create _Folder"
+#~ msgstr "Crée"
+
+#, fuzzy
+#~ msgid "Couldn't find pixmap file: %s"
+#~ msgstr "Impossible d'ouvrir le fichier de données %s.\n"
+
+#, fuzzy
+#~ msgid "Bacula Console"
+#~ msgstr "Message de Bacula"
+
+#, fuzzy
+#~ msgid "Connect to Director"
+#~ msgstr "Impossible de se connecter au Director\n"
+
+#, fuzzy
+#~ msgid "Run"
+#~ msgstr "En cours"
+
+#, fuzzy
+#~ msgid "Label"
+#~ msgstr "Type"
+
+#, fuzzy
+#~ msgid " Command: "
+#~ msgstr "Erreur sur la commande : %s\n"
+
+#, fuzzy
+#~ msgid "Enter Commands Here"
+#~ msgstr "Exécuter une requête SQL : "
+
+#, fuzzy
+#~ msgid " Status: "
+#~ msgstr "Statut :\n"
+
+#, fuzzy
+#~ msgid " "
+#~ msgstr " ("
+
+#, fuzzy
+#~ msgid "Bacula Console\n"
+#~ msgstr "Message de Bacula"
+
+#, fuzzy
+#~ msgid "Copyright (c) 2000 - 2004, Kern Sibbald and John Walker"
+#~ msgstr ""
+#~ "Copyright (C) 2000-2005 Kern Sibbald\n"
+#~ "\n"
+#~ "Version : "
+
+#, fuzzy
+#~ msgid "Select Director"
+#~ msgstr "Director"
+
+#, fuzzy
+#~ msgid "Job:"
+#~ msgstr "Job"
+
+#, fuzzy
+#~ msgid " "
+#~ msgstr " ("
+
+#, fuzzy
+#~ msgid "FileSet: "
+#~ msgstr "FileSet"
+
+#, fuzzy
+#~ msgid "Level:"
+#~ msgstr "Type"
+
+#, fuzzy
+#~ msgid "Pool:"
+#~ msgstr "Pool"
+
+#, fuzzy
+#~ msgid "Messages:"
+#~ msgstr "messages"
+
+#, fuzzy
+#~ msgid "Where: "
+#~ msgstr "Destination"
+
+#, fuzzy
+#~ msgid "Restore File Selection"
+#~ msgstr "restauration de fichier"
+
+#, fuzzy
+#~ msgid "Current dir:"
+#~ msgstr "Le slot courant est : %d\n"
+
+#, fuzzy
+#~ msgid "Files Selected: "
+#~ msgstr ""
+#~ "\n"
+#~ "%u fichiers sélectionnés pour la restauration.\n"
+
+#, fuzzy
+#~ msgid "Label a Volume"
+#~ msgstr "labéliser une bande"
+
+#, fuzzy
+#~ msgid "Volume Name:"
+#~ msgstr "Saisissez un nom de Volume : "
+
+#, fuzzy
+#~ msgid "Restore Files Dialog"
+#~ msgstr "restauration de fichier"
+
+#, fuzzy
+#~ msgid "Restore Files"
+#~ msgstr "restauration de fichier"
+
+#, fuzzy
+#~ msgid "Before:"
+#~ msgstr "Restaurer"
+
+#, fuzzy
+#~ msgid "Select Files"
+#~ msgstr "Saisissez le type"
+
+#, fuzzy
+#~ msgid ""
+#~ "\n"
+#~ "Version: %s (%s) %s %s %s\n"
+#~ "\n"
+#~ "Usage: bgnome-console [-s] [-c config_file] [-d debug_level] "
+#~ "[config_file]\n"
+#~ " -c <file> set configuration file to file\n"
+#~ " -dnn set debug level to nn\n"
+#~ " -s no signals\n"
+#~ " -t test - read configuration and exit\n"
+#~ " -? print this message.\n"
+#~ "\n"
+#~ msgstr ""
+#~ ") %s %s %s\n"
+#~ "\n"
+#~ "Usage : bconsole [-s] [-c config_file] [-d niveau_debug]\n"
+#~ " -c <file> set configuration file to file\n"
+#~ " -dnn set debug level to nn\n"
+#~ " -s no signals\n"
+#~ " -t test - lecture de la configuration et sortie\n"
+#~ "\n"
+
+#, fuzzy
+#~ msgid "Pthread cond init error = %s\n"
+#~ msgstr "Erreur pendant l'écriture des attributs dans le spool. ERR=%s\n"
+
+#, fuzzy
+#~ msgid " Not Connected"
+#~ msgstr "Connexion...\n"
+
+#, fuzzy
+#~ msgid " Connecting to Director %s:%d"
+#~ msgstr "Connexion au Director %s:%d\n"
+
+#, fuzzy
+#~ msgid " Connected"
+#~ msgstr "Connexion...\n"
+
+#, fuzzy
+#~ msgid "File"
+#~ msgstr "FileSet"
+
+#, fuzzy
+#~ msgid "Director authorization problem.\n"
+#~ msgstr "Pas d'enregistrement trouvé en base pour : %s\n"
+
+#, fuzzy
+#~ msgid ""
+#~ "Please see http://www.bacula.org/en/rel-manual/Bacula_Freque_Asked_Questi."
+#~ "html#SECTION003760000000000000000 for help.\n"
+#~ msgstr ""
+#~ "Problème d'authentification entre le client et le director.\n"
+#~ "Le plus souvent, les mots de pass ne correspondent pas.\n"
+#~ "Vous trouverez de l'aide sur\n"
+#~ "http://www.bacula.org/rel-manual/faq.html#AuthorizationErrors\n"
+
+#, fuzzy
+#~ msgid "%s: Bad response to Hello command: ERR=%s\n"
+#~ msgstr "Mauvaise réponse à la commande Hello : ERR=%s\n"
+
+#, fuzzy
+#~ msgid "Can't restore ACLs of %s\n"
+#~ msgstr "Démarrage du Job de restauration %s\n"
+
+#~ msgid "Reposition from (file:block) %u:%u to %u:%u\n"
+#~ msgstr "Repositionnement de (fichier:bloc) %u:%u à %u:%u\n"
+
+#~ msgid "Cannot select %s in batch mode.\n"
+#~ msgstr "Impossible de choisir %s en mode batch.\n"
+
+#~ msgid "run <job-name>"
+#~ msgstr "run <nom-job> -- lance un job"
+
+#~ msgid "status [storage | client]=<name>"
+#~ msgstr ""
+#~ "status [storage | client]=<name> -- affiche le statut d'un composant"
+
+#, fuzzy
+#~ msgid "Cannot find previous JobIds.\n"
+#~ msgstr "Impossible de trouver la ressource Job « %s »\n"
+
+#~ msgid "Enter new RecyclePool name: "
+#~ msgstr "Saisissez le nouveau RecyclePool : "
+
+#~ msgid "Start Migration JobId %s, Job=%s\n"
+#~ msgstr "Début de la Migration JobId %s, Job=%s\n"
+
+#~ msgid "No Volumes found to migrate.\n"
+#~ msgstr "Aucun volume trouvé pour la migration.\n"
+
+#, fuzzy
+#~ msgid "No JobIds found to migrate.\n"
+#~ msgstr "Aucun volume trouvé pour la restauration.\n"
+
+#~ msgid ""
+#~ "\n"
+#~ "%d Jobs, %s files inserted into the tree and marked for extraction.\n"
+#~ msgstr ""
+#~ "\n"
+#~ "%d Jobs, %s fichiers analysés et sélectionnés pour la restauration.\n"
+
+#~ msgid ""
+#~ "\n"
+#~ "%d Jobs, %s files inserted into the tree.\n"
+#~ msgstr ""
+#~ "\n"
+#~ "%d Jobs, %s fichiers analysés.\n"
+
+#~ msgid " ("
+#~ msgstr " ("
+
+#~ msgid ""
+#~ "): %s\n"
+#~ " JobId: %d\n"
+#~ " Job: %s\n"
+#~ " Start time: %s\n"
+#~ " End time: %s\n"
+#~ " Termination: %s\n"
+#~ "\n"
+#~ msgstr ""
+#~ ") : %s\n"
+#~ " JobId : %d\n"
+#~ " Job : %s\n"
+#~ " Début : %s\n"
+#~ " Fin : %s\n"
+#~ " Statut de fin : %s\n"
+#~ "\n"
+
+#, fuzzy
+#~ msgid ""
+#~ "Run Migration job\n"
+#~ "JobName: %s\n"
+#~ "Bootstrap: %s\n"
+#~ "Client: %s\n"
+#~ "FileSet: %s\n"
+#~ "Pool: %s (From %s)\n"
+#~ "Read Storage: %s (From %s)\n"
+#~ "Write Storage: %s (From %s)\n"
+#~ "JobId: %s\n"
+#~ "When: %s\n"
+#~ "Catalog: %s\n"
+#~ "Priority: %d\n"
+#~ msgstr ""
+#~ "Lancement de la restauration\n"
+#~ "JobName : %s\n"
+#~ "Bootstrap : %s\n"
+#~ "Destination : %s\n"
+#~ "Écrasement : %s\n"
+#~ "Client : %s\n"
+#~ "Storage : %s\n"
+#~ "JobId : %s\n"
+#~ "Quand : %s\n"
+#~ "Catalogue : %s\n"
+#~ "Priorité : %d\n"
+
+#, fuzzy
+#~ msgid "Error updating DB Job file. ERR=%s\n"
+#~ msgstr ""
+#~ "Erreur pendant l'écriture des données vers le fichier de spool. ERR=%s\n"
+
+#, fuzzy
+#~ msgid "Error updating DB Media file. ERR=%s\n"
+#~ msgstr "Impossible de mettre à jour les informations du Volume : ERR=%s"
+
+#~ msgid "===Write error===\n"
+#~ msgstr "===Erreur d'écriture===\n"
+
+#~ msgid "Ready to append to end of Volume \"%s\" at file address=%u.\n"
+#~ msgstr ""
+#~ "Prêt à ajouter des données à la fin du volume « %s » file adress=%"
+#~ "u.\n"
+
+#~ msgid "3901 open device failed: ERR=%s\n"
+#~ msgstr "3901 l'ouverture du device a échoué : ERR=%s\n"
+
+#, fuzzy
+#~ msgid ""
+#~ "Wanted to append to Volume \"%s\", but device %s is busy writing on \"%s"
+#~ "\" .\n"
+#~ msgstr ""
+#~ "Voulait le Volume « %s », mais le Device %s est occupé à écrire sur "
+#~ "« %s ».\n"
+
+#~ msgid ""
+#~ "Cannot recycle volume \"%s\" on device %s because it is in use by another "
+#~ "job.\n"
+#~ msgstr ""
+#~ "Impossible de recycler le volume « %s » sur le device %s car il est "
+#~ "utilisé par un autre job.\n"
+
+#, fuzzy
+#~ msgid ""
+#~ ") %s %s %s\n"
+#~ "\n"
+#~ "Usage: bconsole [-s] [-c config_file] [-d debug_level]\n"
+#~ " -c <file> set configuration file to file\n"
+#~ " -dnn set debug level to nn\n"
+#~ " -n no conio\n"
+#~ " -s no signals\n"
+#~ " -t test - read configuration and exit\n"
+#~ " -? print this message.\n"
+#~ "\n"
+#~ msgstr ""
+#~ ") %s %s %s\n"
+#~ "\n"
+#~ "Usage : bconsole [-s] [-c config_file] [-d niveau_debug]\n"
+#~ " -c <file> set configuration file to file\n"
+#~ " -dnn set debug level to nn\n"
+#~ " -s no signals\n"
+#~ " -t test - lecture de la configuration et sortie\n"
+#~ "\n"
+
+#~ msgid "%s: %s Warning: "
+#~ msgstr "%s : %s Attention : "
+
+#~ msgid "Cannot bind port %d: ERR=%s: retrying ...\n"
+#~ msgstr "Impossible de s'attacher au port %d : ERR=%s : Réessaie...\n"
+
+#~ msgid "Server socket"
+#~ msgstr "Socket serveur"
+
+#~ msgid "client"
+#~ msgstr "client"
+
+#, fuzzy
+#~ msgid " could not be installed"
+#~ msgstr "Bacula Storage : Dernier Job en erreur"
+
+#, fuzzy
+#~ msgid " has been removed"
+#~ msgstr "a été annulé"
+
+#, fuzzy
+#~ msgid " could not be removed"
+#~ msgstr "Impossible d'ouvrir le device %s\n"
+
+#~ msgid "get_char: called after EOF\n"
+#~ msgstr "get_char : appelé après EOF\n"
+
+#, fuzzy
+#~ msgid "Bacula Usage"
+#~ msgstr "Message de Bacula"
+
+#, fuzzy
+#~ msgid "Unable to get Volume record: ERR=%s"
+#~ msgstr "Impossible de mettre à jour les informations du Volume : ERR=%s"
+
+#~ msgid "Unable to update Volume record: ERR=%s"
+#~ msgstr "Impossible de mettre à jour les informations du Volume : ERR=%s"
+
+#~ msgid "Do you want to continue? (yes|no): "
+#~ msgstr "Voulez vous continuer ? (oui/non) : "
+
+#, fuzzy
+#~ msgid "Invalid MediaId found.\n"
+#~ msgstr "Période invalide.\n"
+
+#~ msgid "Device %s is mounted with Volume=\"%s\" Pool=\"%s\"\n"
+#~ msgstr "Le Device %s est monté avec le Volume=« %s » Pool=« %s »\n"
+
+#, fuzzy
+#~ msgid "Forbidden \"where\" specified.\n"
+#~ msgstr "La destination (Where) est déjà spécifiée.\n"
+
+#~ msgid "Please mount Volume \"%s\" on Storage Device %s for Job %s\n"
+#~ msgstr ""
+#~ "Merci de monter le Volume « %s » sur le Storage Device « %s » pour "
+#~ "le Job %s\n"
+
+#~ msgid "Job %s not found.\n"
+#~ msgstr "Job %s non trouvé.\n"
+
+#~ msgid "%s Version: %s (%s)\n"
+#~ msgstr "%s Version : %s (%s)\n"
+
+#~ msgid "There are no Jobs associated with Volume \"%s\". Prune not needed.\n"
+#~ msgstr ""
+#~ "Il n'y a pas de job associé avec le volume « %s ». Pas besoin de "
+#~ "purger le catalogue (prune).\n"
+
+#~ msgid ""
+#~ "There are no Jobs associated with Volume \"%s\". Marking it purged.\n"
+#~ msgstr ""
+#~ "Il n'y a pas de job associé avec le volume « %s ». Il doit être "
+#~ "marqué\n"
+#~ "comme purgé.\n"
+
+#~ msgid "Pruned %d %s on Volume \"%s\" from catalog.\n"
+#~ msgstr "Purge du catalogue (prune) de %d %s sur le volume « %s ».\n"
+
+#~ msgid "%d Files for client \"%s\" purged from %s catalog.\n"
+#~ msgstr "%d fichiers du client « %s » purgé du catalogue %s.\n"
+
+#~ msgid "No Jobs found for client %s to purge from %s catalog.\n"
+#~ msgstr ""
+#~ "Pas de job à purger pour le client « %s » dans le catalogue %s.\n"
+
+#~ msgid ""
+#~ "Run Restore job\n"
+#~ "JobName: %s\n"
+#~ "Bootstrap: %s\n"
+#~ "Where: %s\n"
+#~ "Replace: %s\n"
+#~ "FileSet: %s\n"
+#~ "Client: %s\n"
+#~ "Storage: %s\n"
+#~ "When: %s\n"
+#~ "Catalog: %s\n"
+#~ "Priority: %d\n"
+#~ msgstr ""
+#~ "Lancement de la restauration\n"
+#~ "JobName : %s\n"
+#~ "Bootstrap : %s\n"
+#~ "Destination : %s\n"
+#~ "Écrasement : %s\n"
+#~ "FileSet : %s\n"
+#~ "Client : %s\n"
+#~ "Storage : %s\n"
+#~ "Quand : %s\n"
+#~ "Catalogue : %s\n"
+#~ "Priorité : %d\n"
+
+#~ msgid "Item 1 selected automatically.\n"
+#~ msgstr "Sélection automatique de l'objet 1.\n"
+
+#~ msgid "OpenSSL error occured"
+#~ msgstr "Une erreur OpenSSL s'est produite"
+
+#~ msgid "Device %s is busy reading.\n"
+#~ msgstr "Le device %s est occupé en lecture.\n"
+
+#, fuzzy
+#~ msgid "Job started. JobId="
+#~ msgstr "Job démarré. JobId=%s\n"
+
+#, fuzzy
+#~ msgid "NextPool in Pool resource"
+#~ msgstr "Sélectionnez le Pool"
+
+#~ msgid "%s: is an illegal command.\n"
+#~ msgstr "%s : est une commande invalide.\n"
+
+#, fuzzy
+#~ msgid "\"%s\" is an illegal command\n"
+#~ msgstr "%s est une commande invalide\n"
+
+#, fuzzy
+#~ msgid ""
+#~ ")\n"
+#~ "\n"
+#~ "Usage: dird [-f -s] [-c config_file] [-d debug_level] [config_file]\n"
+#~ " -c <file> set configuration file to file\n"
+#~ " -dnn set debug level to nn\n"
+#~ " -f run in foreground (for debugging)\n"
+#~ " -r <job> run <job> now\n"
+#~ " -s no signals\n"
+#~ " -t test - read configuration and exit\n"
+#~ " -? print this message.\n"
+#~ "\n"
+#~ msgstr ""
+#~ "Copyright (C) 2000-2005 Kern Sibbald.\n"
+#~ "\n"
+#~ "Version : %s (%s)\n"
+#~ "\n"
+#~ "Usage : dird [-f -s] [-c config_file] [-d debug_level] [config_file]\n"
+#~ " -c <fich> utilise fich comme fichier de configuration\n"
+#~ " -dnn positionne le niveau de debug à nn\n"
+#~ " -f reste en avant-plan (pour debugger)\n"
+#~ " -g groupid\n"
+#~ " -r <job> lance <job> maintenant\n"
+#~ " -s pas de signaux\n"
+#~ " -t test - lit seulement le fichier de configuration\n"
+#~ " -u userid\n"
+#~ " -v affiche les messages utilisateurs\n"
+#~ " -? affiche ce message.\n"
+#~ "\n"
+
+#~ msgid "Write failed at block %u.\n"
+#~ msgstr "Impossible d'écrire au bloc %u.\n"
+
+#, fuzzy
+#~ msgid ""
+#~ "Copyright (C) 2004-2006 Kern Sibbald\n"
+#~ "Written by Nicolas Boichat\n"
+#~ msgstr ""
+#~ "Copyright (C) 2000-2005 Kern Sibbald\n"
+#~ "\n"
+#~ "Version : "
+
+#~ msgid "Using default Catalog name=%s DB=%s\n"
+#~ msgstr "Utilisation du Catalogue par défaut name=%s DB=%s\n"
+
+#, fuzzy
+#~ msgid "3912 Failed to truncate previous DVD volume.\n"
+#~ msgstr "3912 Impossible de labéliser le Volume : ERR=%s\n"
+
+#~ msgid "Rewind failed.\n"
+#~ msgstr "Impossible de Rembobiner.\n"
+
+#~ msgid "Write EOF failed.\n"
+#~ msgstr "Impossible d'écrire le EOF.\n"
+
+#~ msgid "Success"
+#~ msgstr "Succès"
+
+#~ msgid "No match"
+#~ msgstr "Aucune correspondance"
+
+#~ msgid "Invalid regular expression"
+#~ msgstr "Expression régulière invalide"
+
+#~ msgid "Invalid back reference"
+#~ msgstr "Référence arrière invalide"
+
+#~ msgid "Regular expression too big"
+#~ msgstr "Expression régulière trop grande"
+
+#~ msgid "Could not get %d bytes of shared memory: %s\n"
+#~ msgstr "Impossible de récupérer %d octets de mémoire partagée : %s\n"
+
+#~ msgid "catalog"
+#~ msgstr "catalog"
+
+#~ msgid "fd"
+#~ msgstr "fd"
+
+#~ msgid "========================================================================\n"
+#~ msgstr "========================================================================\n"
+
+#~ msgid "readlabel %s Slot=%d drive=%d\n"
+#~ msgstr "readlabel %s Slot=%d drive=%d\n"
+
+#~ msgid "autochanger list %s \n"
+#~ msgstr "autochanger list %s \n"
+
+#~ msgid "autochanger slots %s\n"
+#~ msgstr "autochanger slots %s\n"
+
+#~ msgid "autochanger drives %s\n"
+#~ msgstr "autochanger drives %s\n"
+
+#~ msgid "No MediaType found for your JobIds.\n"
+#~ msgstr "Pas de MediaType trouvé pour vos JobIds\n"
+
+#~ msgid "off"
+#~ msgstr "off"
+
+#~ msgid "jobid"
+#~ msgstr "jobid"
+
+#~ msgid "job"
+#~ msgstr "job"
+
+#~ msgid "restart"
+#~ msgstr "restart"
+
+#~ msgid ""
+#~ "\n"
+#~ "%s Version: %s (%s) %s %s %s\n"
+#~ msgstr ""
+#~ "\n"
+#~ "%s Version : %s (%s) %s %s %s\n"