+ What: The "stat clients" command doesn't include any detail on when
+ the active backup jobs were launched.
+
+ Why: Including the timestamp would make it much easier to decide whether
+ a job is running properly.
+
+ Notes: It may be helpful to have the output from "stat clients" formatted
+ more like that from "stat dir" (and other commands), in a column
+ format. The per-client information that's currently shown (level,
+ client name, JobId, Volume, pool, device, Files, etc.) is good, but
+ somewhat hard to parse (both programmatically and visually),
+ particularly when there are many active clients.
+
+
+Item 20: Cause daemons to use a specific IP address to source communications
+ Origin: Bill Moran <wmoran@collaborativefusion.com>
+ Date: 18 Dec 2006
+ Status: Done in 3.0.2
+ What: Cause Bacula daemons (dir, fd, sd) to always use the ip address
+ specified in the [DIR|DF|SD]Addr directive as the source IP
+ for initiating communication.
+ Why: On complex networks, as well as extremely secure networks, it's
+ not unusual to have multiple possible routes through the network.
+ Often, each of these routes is secured by different policies
+ (effectively, firewalls allow or deny different traffic depending
+ on the source address)
+ Unfortunately, it can sometimes be difficult or impossible to
+ represent this in a system routing table, as the result is
+ excessive subnetting that quickly exhausts available IP space.
+ The best available workaround is to provide multiple IPs to
+ a single machine that are all on the same subnet. In order
+ for this to work properly, applications must support the ability
+ to bind outgoing connections to a specified address, otherwise
+ the operating system will always choose the first IP that
+ matches the required route.
+ Notes: Many other programs support this. For example, the following
+ can be configured in BIND:
+ query-source address 10.0.0.1;
+ transfer-source 10.0.0.2;
+ Which means queries from this server will always come from
+ 10.0.0.1 and zone transfers will always originate from
+ 10.0.0.2.
+
+
+Item 21: Message mailing based on backup types
+ Origin: Evan Kaufman <evan.kaufman@gmail.com>
+ Date: January 6, 2006
+ Status:
+
+ What: In the "Messages" resource definitions, allowing messages
+ to be mailed based on the type (backup, restore, etc.) and level
+ (full, differential, etc) of job that created the originating
+ message(s).
+
+ Why: It would, for example, allow someone's boss to be emailed
+ automatically only when a Full Backup job runs, so he can
+ retrieve the tapes for offsite storage, even if the IT dept.
+ doesn't (or can't) explicitly notify him. At the same time, his
+ mailbox wouldnt be filled by notifications of Verifies, Restores,
+ or Incremental/Differential Backups (which would likely be kept
+ onsite).
+
+ Notes: One way this could be done is through additional message types, for
+ example:
+
+ Messages {
+ # email the boss only on full system backups
+ Mail = boss@mycompany.com = full, !incremental, !differential, !restore,
+ !verify, !admin
+ # email us only when something breaks
+ MailOnError = itdept@mycompany.com = all
+ }
+
+ Notes: Kern: This should be rather trivial to implement.
+
+
+Item 22: Ability to import/export Bacula database entities
+ Date: 26 April 2009
+ Origin: Eric
+ Status:
+
+ What: Create a Bacula ASCII SQL database independent format that permits
+ importing and exporting database catalog Job entities.
+
+ Why: For achival, database clustering, tranfer to other databases
+ of any SQL engine.
+
+ Notes: Job selection should be by Job, time, Volume, Client, Pool and possibly
+ other criteria.
+
+
+Item 23: "Maximum Concurrent Jobs" for drives when used with changer device
+ Origin: Ralf Gross ralf-lists <at> ralfgross.de
+ Date: 2008-12-12
+ Status: Done in 3.0.3
+
+ What: respect the "Maximum Concurrent Jobs" directive in the _drives_
+ Storage section in addition to the changer section
+
+ Why: I have a 3 drive changer where I want to be able to let 3 concurrent
+ jobs run in parallel. But only one job per drive at the same time.
+ Right now I don't see how I could limit the number of concurrent jobs
+ per drive in this situation.
+
+ Notes: Using different priorities for these jobs lead to problems that other
+ jobs are blocked. On the user list I got the advice to use the
+ "Prefer Mounted Volumes" directive, but Kern advised against using
+ "Prefer Mounted Volumes" in an other thread:
+ http://article.gmane.org/gmane.comp.sysutils.backup.bacula.devel/11876/
+
+ In addition I'm not sure if this would be the same as respecting the
+ drive's "Maximum Concurrent Jobs" setting.
+
+ Example:
+
+ Storage {
+ Name = Neo4100
+ Address = ....
+ SDPort = 9103
+ Password = "wiped"
+ Device = Neo4100
+ Media Type = LTO4
+ Autochanger = yes
+ Maximum Concurrent Jobs = 3
+ }
+
+ Storage {
+ Name = Neo4100-LTO4-D1
+ Address = ....
+ SDPort = 9103
+ Password = "wiped"
+ Device = ULTRIUM-TD4-D1
+ Media Type = LTO4
+ Maximum Concurrent Jobs = 1
+ }
+
+ [2 more drives]
+
+ The "Maximum Concurrent Jobs = 1" directive in the drive's section is
+ ignored.
+
+
+Item 24: Implementation of running Job speed limit.
+Origin: Alex F, alexxzell at yahoo dot com
+Date: 29 January 2009
+
+What: I noticed the need for an integrated bandwidth limiter for
+ running jobs. It would be very useful just to specify another
+ field in bacula-dir.conf, like speed = how much speed you wish
+ for that specific job to run at
+
+Why: Because of a couple of reasons. First, it's very hard to implement a
+ traffic shaping utility and also make it reliable. Second, it is very
+ uncomfortable to have to implement these apps to, let's say 50 clients
+ (including desktops, servers). This would also be unreliable because you
+ have to make sure that the apps are properly working when needed; users
+ could also disable them (accidentally or not). It would be very useful
+ to provide Bacula this ability. All information would be centralized,
+ you would not have to go to 50 different clients in 10 different
+ locations for configuration; eliminating 3rd party additions help in
+ establishing efficiency. Would also avoid bandwidth congestion,
+ especially where there is little available.
+
+
+Item 25: Add an override in Schedule for Pools based on backup types
+Date: 19 Jan 2005
+Origin: Chad Slater <chad.slater@clickfox.com>
+Status:
+
+ What: Adding a FullStorage=BigTapeLibrary in the Schedule resource
+ would help those of us who use different storage devices for different
+ backup levels cope with the "auto-upgrade" of a backup.
+
+ Why: Assume I add several new devices to be backed up, i.e. several
+ hosts with 1TB RAID. To avoid tape switching hassles, incrementals are
+ stored in a disk set on a 2TB RAID. If you add these devices in the
+ middle of the month, the incrementals are upgraded to "full" backups,
+ but they try to use the same storage device as requested in the
+ incremental job, filling up the RAID holding the differentials. If we
+ could override the Storage parameter for full and/or differential
+ backups, then the Full job would use the proper Storage device, which
+ has more capacity (i.e. a 8TB tape library.
+
+
+Item 26: Automatic promotion of backup levels based on backup size
+ Date: 19 January 2006
+ Origin: Adam Thornton <athornton@sinenomine.net>
+ Status: