+
+Item 7: Add ability to Verify any specified Job.
+Date: 17 January 2008
+Origin: portrix.net Hamburg, Germany.
+Contact: Christian Sabelmann
+Status: 70% of the required Code is part of the Verify function since v. 2.x
+
+ What:
+ The ability to tell Bacula which Job should verify instead of
+ automatically verify just the last one.
+
+ Why:
+ It is sad that such a powerfull feature like Verify Jobs
+ (VolumeToCatalog) is restricted to be used only with the last backup Job
+ of a client. Actual users who have to do daily Backups are forced to
+ also do daily Verify Jobs in order to take advantage of this useful
+ feature. This Daily Verify after Backup conduct is not always desired
+ and Verify Jobs have to be sometimes scheduled. (Not necessarily
+ scheduled in Bacula). With this feature Admins can verify Jobs once a
+ Week or less per month, selecting the Jobs they want to verify. This
+ feature is also not to difficult to implement taking in account older bug
+ reports about this feature and the selection of the Job to be verified.
+
+ Notes: For the verify Job, the user could select the Job to be verified
+ from a List of the latest Jobs of a client. It would also be possible to
+ verify a certain volume. All of these would naturaly apply only for
+ Jobs whose file information are still in the catalog.
+
+
+Item 8: Improve Bacula's tape and drive usage and cleaning management
+ Date: 8 November 2005, November 11, 2005
+ Origin: Adam Thornton <athornton at sinenomine dot net>,
+ Arno Lehmann <al at its-lehmann dot de>
+ Status:
+
+ What: Make Bacula manage tape life cycle information, tape reuse
+ times and drive cleaning cycles.
+
+ Why: All three parts of this project are important when operating
+ backups.
+ We need to know which tapes need replacement, and we need to
+ make sure the drives are cleaned when necessary. While many
+ tape libraries and even autoloaders can handle all this
+ automatically, support by Bacula can be helpful for smaller
+ (older) libraries and single drives. Limiting the number of
+ times a tape is used might prevent tape errors when using
+ tapes until the drives can't read it any more. Also, checking
+ drive status during operation can prevent some failures (as I
+ [Arno] had to learn the hard way...)
+
+ Notes: First, Bacula could (and even does, to some limited extent)
+ record tape and drive usage. For tapes, the number of mounts,
+ the amount of data, and the time the tape has actually been
+ running could be recorded. Data fields for Read and Write
+ time and Number of mounts already exist in the catalog (I'm
+ not sure if VolBytes is the sum of all bytes ever written to
+ that volume by Bacula). This information can be important
+ when determining which media to replace. The ability to mark
+ Volumes as "used up" after a given number of write cycles
+ should also be implemented so that a tape is never actually
+ worn out. For the tape drives known to Bacula, similar
+ information is interesting to determine the device status and
+ expected life time: Time it's been Reading and Writing, number
+ of tape Loads / Unloads / Errors. This information is not yet
+ recorded as far as I [Arno] know. A new volume status would
+ be necessary for the new state, like "Used up" or "Worn out".
+ Volumes with this state could be used for restores, but not
+ for writing. These volumes should be migrated first (assuming
+ migration is implemented) and, once they are no longer needed,
+ could be moved to a Trash pool.
+
+ The next step would be to implement a drive cleaning setup.
+ Bacula already has knowledge about cleaning tapes. Once it
+ has some information about cleaning cycles (measured in drive
+ run time, number of tapes used, or calender days, for example)
+ it can automatically execute tape cleaning (with an
+ autochanger, obviously) or ask for operator assistance loading
+ a cleaning tape.
+
+ The final step would be to implement TAPEALERT checks not only
+ when changing tapes and only sending the information to the
+ administrator, but rather checking after each tape error,
+ checking on a regular basis (for example after each tape
+ file), and also before unloading and after loading a new tape.
+ Then, depending on the drives TAPEALERT state and the known
+ drive cleaning state Bacula could automatically schedule later
+ cleaning, clean immediately, or inform the operator.
+
+ Implementing this would perhaps require another catalog change
+ and perhaps major changes in SD code and the DIR-SD protocol,
+ so I'd only consider this worth implementing if it would
+ actually be used or even needed by many people.
+
+ Implementation of these projects could happen in three distinct
+ sub-projects: Measuring Tape and Drive usage, retiring
+ volumes, and handling drive cleaning and TAPEALERTs.
+
+
+Item 9: Allow FD to initiate a backup
+Origin: Frank Volf (frank at deze dot org)
+Date: 17 November 2005
+Status:
+
+What: Provide some means, possibly by a restricted console that
+ allows a FD to initiate a backup, and that uses the connection
+ established by the FD to the Director for the backup so that
+ a Director that is firewalled can do the backup.
+Why: Makes backup of laptops much easier.
+
+
+Item 10: Restore from volumes on multiple storage daemons
+Origin: Graham Keeling (graham@equiinet.com)
+Date: 12 March 2009
+Status: Done in 3.0.2
+
+What: The ability to restore from volumes held by multiple storage daemons
+ would be very useful.
+
+Why: It is useful to be able to backup to any number of different storage
+ daemons. For example, your first storage daemon may run out of space,
+ so you switch to your second and carry on. Bacula will currently let
+ you do this. However, once you come to restore, bacula cannot cope
+ when volumes on different storage daemons are required.
+
+ Notes: The director knows that more than one storage daemon is needed,
+ as bconsole outputs something like the following table.
+
+ The job will require the following
+ Volume(s) Storage(s) SD Device(s)
+ =====================================================================
+
+ backup-0001 Disk 1 Disk 1.0
+ backup-0002 Disk 2 Disk 2.0
+
+ However, the bootstrap file that it creates gets sent to the first
+ storage daemon only, which then stalls for a long time, 'waiting for a
+ mount request' for the volume that it doesn't have. The bootstrap file
+ contains no knowledge of the storage daemon. Under the current design:
+
+ The director connects to the storage daemon, and gets an sd_auth_key.
+ The director then connects to the file daemon, and gives it the
+ sd_auth_key with the 'jobcmd'. (restoring of files happens) The
+ director does a 'wait_for_storage_daemon_termination()'. The director
+ waits for the file daemon to indicate the end of the job.
+
+ With my idea:
+
+ The director connects to the file daemon.
+ Then, for each storage daemon in the .bsr file... {
+ The director connects to the storage daemon, and gets an sd_auth_key.
+ The director then connects to the file daemon, and gives it the
+ sd_auth_key with the 'storaddr' command.
+ (restoring of files happens)
+ The director does a 'wait_for_storage_daemon_termination()'.
+ The director waits for the file daemon to indicate the end of the
+ work on this storage.
+ }
+
+ The director tells the file daemon that there are no more storages to
+ contact. The director waits for the file daemon to indicate the end of
+ the job. As you can see, each restore between the file daemon and
+ storage daemon is handled in the same way that it is currently handled,
+ using the same method for authentication, except that the sd_auth_key
+ is moved from the 'jobcmd' to the 'storaddr' command - where it
+ logically belongs.
+
+
+Item 11: Implement Storage daemon compression
+ Date: 18 December 2006
+ Origin: Vadim A. Umanski , e-mail umanski@ext.ru
+ Status:
+ What: The ability to compress backup data on the SD receiving data
+ instead of doing that on client sending data.
+ Why: The need is practical. I've got some machines that can send
+ data to the network 4 or 5 times faster than compressing
+ them (I've measured that). They're using fast enough SCSI/FC
+ disk subsystems but rather slow CPUs (ex. UltraSPARC II).
+ And the backup server has got a quite fast CPUs (ex. Dual P4
+ Xeons) and quite a low load. When you have 20, 50 or 100 GB
+ of raw data - running a job 4 to 5 times faster - that
+ really matters. On the other hand, the data can be
+ compressed 50% or better - so losing twice more space for
+ disk backup is not good at all. And the network is all mine
+ (I have a dedicated management/provisioning network) and I
+ can get as high bandwidth as I need - 100Mbps, 1000Mbps...
+ That's why the server-side compression feature is needed!
+ Notes:
+
+
+Item 12: Reduction of communications bandwidth for a backup
+ Date: 14 October 2008
+ Origin: Robin O'Leary (Equiinet)
+ Status:
+
+ What: Using rdiff techniques, Bacula could significantly reduce
+ the network data transfer volume to do a backup.
+
+ Why: Faster backup across the Internet
+
+ Notes: This requires retaining certain data on the client during a Full
+ backup that will speed up subsequent backups.
+
+
+Item 13: Ability to reconnect a disconnected comm line
+ Date: 26 April 2009
+ Origin: Kern/Eric
+ Status:
+
+ What: Often jobs fail because of a communications line drop. In that
+ case, Bacula should be able to reconnect to the other daemon and
+ resume the job.
+
+ Why: Avoids backuping data already saved.
+
+ Notes: *Very* complicated from a design point of view because of authenication.
+
+Item 14: Start spooling even when waiting on tape
+ Origin: Tobias Barth <tobias.barth@web-arts.com>
+ Date: 25 April 2008
+ Status:
+
+ What: If a job can be spooled to disk before writing it to tape, it should
+ be spooled immediately. Currently, bacula waits until the correct
+ tape is inserted into the drive.
+
+ Why: It could save hours. When bacula waits on the operator who must insert
+ the correct tape (e.g. a new tape or a tape from another media
+ pool), bacula could already prepare the spooled data in the spooling
+ directory and immediately start despooling when the tape was
+ inserted by the operator.
+
+ 2nd step: Use 2 or more spooling directories. When one directory is
+ currently despooling, the next (on different disk drives) could
+ already be spooling the next data.
+
+ Notes: I am using bacula 2.2.8, which has none of those features
+ implemented.
+
+
+Item 15: Enable/disable compression depending on storage device (disk/tape)
+ Origin: Ralf Gross ralf-lists@ralfgross.de
+ Date: 2008-01-11
+ Status: Initial Request
+
+ What: Add a new option to the storage resource of the director. Depending
+ on this option, compression will be enabled/disabled for a device.
+
+ Why: If different devices (disks/tapes) are used for full/diff/incr
+ backups, software compression will be enabled for all backups
+ because of the FileSet compression option. For backup to tapes
+ wich are able to do hardware compression this is not desired.
+
+
+ Notes:
+ http://news.gmane.org/gmane.comp.sysutils.backup.bacula.devel/cutoff=11124
+ It must be clear to the user, that the FileSet compression option
+ must still be enabled use compression for a backup job at all.
+ Thus a name for the new option in the director must be
+ well-defined.
+
+ Notes: KES I think the Storage definition should probably override what
+ is in the Job definition or vice-versa, but in any case, it must
+ be well defined.
+
+
+Item 16: Include all conf files in specified directory
+Date: 18 October 2008
+Origin: Database, Lda. Maputo, Mozambique
+Contact:Cameron Smith / cameron.ord@database.co.mz
+Status: New request
+
+What: A directive something like "IncludeConf = /etc/bacula/subconfs" Every
+ time Bacula Director restarts or reloads, it will walk the given
+ directory (non-recursively) and include the contents of any files
+ therein, as though they were appended to bacula-dir.conf
+
+Why: Permits simplified and safer configuration for larger installations with
+ many client PCs. Currently, through judicious use of JobDefs and
+ similar directives, it is possible to reduce the client-specific part of
+ a configuration to a minimum. The client-specific directives can be
+ prepared according to a standard template and dropped into a known
+ directory. However it is still necessary to add a line to the "master"
+ (bacula-dir.conf) referencing each new file. This exposes the master to
+ unnecessary risk of accidental mistakes and makes automation of adding
+ new client-confs, more difficult (it is easier to automate dropping a
+ file into a dir, than rewriting an existing file). Ken has previously
+ made a convincing argument for NOT including Bacula's core configuration
+ in an RDBMS, but I believe that the present request is a reasonable
+ extension to the current "flat-file-based" configuration philosophy.
+
+Notes: There is NO need for any special syntax to these files. They should
+ contain standard directives which are simply "inlined" to the parent
+ file as already happens when you explicitly reference an external file.
+
+Notes: (kes) this can already be done with scripting
+ From: John Jorgensen <jorgnsn@lcd.uregina.ca>
+ The bacula-dir.conf at our site contains these lines:
+
+ #
+ # Include subfiles associated with configuration of clients.
+ # They define the bulk of the Clients, Jobs, and FileSets.
+ #
+ @|"sh -c 'for f in /etc/bacula/clientdefs/*.conf ; do echo @${f} ; done'"
+
+ and when we get a new client, we just put its configuration into
+ a new file called something like:
+
+ /etc/bacula/clientdefs/clientname.conf
+
+
+Item 17: Multiple threads in file daemon for the same job
+ Date: 27 November 2005
+ Origin: Ove Risberg (Ove.Risberg at octocode dot com)
+ Status:
+
+ What: I want the file daemon to start multiple threads for a backup
+ job so the fastest possible backup can be made.
+
+ The file daemon could parse the FileSet information and start
+ one thread for each File entry located on a separate
+ filesystem.
+
+ A confiuration option in the job section should be used to
+ enable or disable this feature. The confgutration option could
+ specify the maximum number of threads in the file daemon.
+
+ If the theads could spool the data to separate spool files
+ the restore process will not be much slower.
+
+ Why: Multiple concurrent backups of a large fileserver with many
+ disks and controllers will be much faster.
+
+
+Item 18: Possibilty to schedule Jobs on last Friday of the month
+Origin: Carsten Menke <bootsy52 at gmx dot net>
+Date: 02 March 2008
+Status:
+
+ What: Currently if you want to run your monthly Backups on the last
+ Friday of each month this is only possible with workarounds (e.g
+ scripting) (As some months got 4 Fridays and some got 5 Fridays)
+ The same is true if you plan to run your yearly Backups on the
+ last Friday of the year. It would be nice to have the ability to
+ use the builtin scheduler for this.
+
+ Why: In many companies the last working day of the week is Friday (or
+ Saturday), so to get the most data of the month onto the monthly
+ tape, the employees are advised to insert the tape for the
+ monthly backups on the last friday of the month.
+
+ Notes: To give this a complete functionality it would be nice if the
+ "first" and "last" Keywords could be implemented in the
+ scheduler, so it is also possible to run monthy backups at the
+ first friday of the month and many things more. So if the syntax
+ would expand to this {first|last} {Month|Week|Day|Mo-Fri} of the
+ {Year|Month|Week} you would be able to run really flexible jobs.
+
+ To got a certain Job run on the last Friday of the Month for example
+ one could then write
+
+ Run = pool=Monthly last Fri of the Month at 23:50
+
+ ## Yearly Backup
+
+ Run = pool=Yearly last Fri of the Year at 23:50
+
+ ## Certain Jobs the last Week of a Month
+
+ Run = pool=LastWeek last Week of the Month at 23:50
+
+ ## Monthly Backup on the last day of the month
+
+ Run = pool=Monthly last Day of the Month at 23:50
+
+
+Item 19: Include timestamp of job launch in "stat clients" output
+ Origin: Mark Bergman <mark.bergman@uphs.upenn.edu>
+ Date: Tue Aug 22 17:13:39 EDT 2006
+ Status:
+
+ What: The "stat clients" command doesn't include any detail on when
+ the active backup jobs were launched.
+
+ Why: Including the timestamp would make it much easier to decide whether
+ a job is running properly.
+
+ Notes: It may be helpful to have the output from "stat clients" formatted
+ more like that from "stat dir" (and other commands), in a column
+ format. The per-client information that's currently shown (level,
+ client name, JobId, Volume, pool, device, Files, etc.) is good, but
+ somewhat hard to parse (both programmatically and visually),
+ particularly when there are many active clients.
+
+
+Item 20: Cause daemons to use a specific IP address to source communications
+ Origin: Bill Moran <wmoran@collaborativefusion.com>
+ Date: 18 Dec 2006
+ Status: Done in 3.0.2
+ What: Cause Bacula daemons (dir, fd, sd) to always use the ip address
+ specified in the [DIR|DF|SD]Addr directive as the source IP
+ for initiating communication.
+ Why: On complex networks, as well as extremely secure networks, it's
+ not unusual to have multiple possible routes through the network.
+ Often, each of these routes is secured by different policies
+ (effectively, firewalls allow or deny different traffic depending
+ on the source address)
+ Unfortunately, it can sometimes be difficult or impossible to
+ represent this in a system routing table, as the result is
+ excessive subnetting that quickly exhausts available IP space.
+ The best available workaround is to provide multiple IPs to
+ a single machine that are all on the same subnet. In order
+ for this to work properly, applications must support the ability
+ to bind outgoing connections to a specified address, otherwise
+ the operating system will always choose the first IP that
+ matches the required route.
+ Notes: Many other programs support this. For example, the following
+ can be configured in BIND:
+ query-source address 10.0.0.1;
+ transfer-source 10.0.0.2;
+ Which means queries from this server will always come from
+ 10.0.0.1 and zone transfers will always originate from
+ 10.0.0.2.
+
+
+Item 21: Message mailing based on backup types
+ Origin: Evan Kaufman <evan.kaufman@gmail.com>
+ Date: January 6, 2006
+ Status:
+
+ What: In the "Messages" resource definitions, allowing messages
+ to be mailed based on the type (backup, restore, etc.) and level
+ (full, differential, etc) of job that created the originating
+ message(s).
+
+ Why: It would, for example, allow someone's boss to be emailed
+ automatically only when a Full Backup job runs, so he can
+ retrieve the tapes for offsite storage, even if the IT dept.
+ doesn't (or can't) explicitly notify him. At the same time, his
+ mailbox wouldnt be filled by notifications of Verifies, Restores,
+ or Incremental/Differential Backups (which would likely be kept
+ onsite).
+
+ Notes: One way this could be done is through additional message types, for
+ example:
+
+ Messages {
+ # email the boss only on full system backups
+ Mail = boss@mycompany.com = full, !incremental, !differential, !restore,
+ !verify, !admin
+ # email us only when something breaks
+ MailOnError = itdept@mycompany.com = all
+ }
+
+ Notes: Kern: This should be rather trivial to implement.
+
+
+Item 22: Ability to import/export Bacula database entities
+ Date: 26 April 2009
+ Origin: Eric
+ Status:
+
+ What: Create a Bacula ASCII SQL database independent format that permits
+ importing and exporting database catalog Job entities.
+
+ Why: For achival, database clustering, tranfer to other databases
+ of any SQL engine.
+
+ Notes: Job selection should be by Job, time, Volume, Client, Pool and possibly
+ other criteria.
+
+
+Item 23: "Maximum Concurrent Jobs" for drives when used with changer device
+ Origin: Ralf Gross ralf-lists <at> ralfgross.de
+ Date: 2008-12-12
+ Status: Done in 3.0.3
+
+ What: respect the "Maximum Concurrent Jobs" directive in the _drives_
+ Storage section in addition to the changer section
+
+ Why: I have a 3 drive changer where I want to be able to let 3 concurrent
+ jobs run in parallel. But only one job per drive at the same time.
+ Right now I don't see how I could limit the number of concurrent jobs
+ per drive in this situation.
+
+ Notes: Using different priorities for these jobs lead to problems that other
+ jobs are blocked. On the user list I got the advice to use the
+ "Prefer Mounted Volumes" directive, but Kern advised against using
+ "Prefer Mounted Volumes" in an other thread:
+ http://article.gmane.org/gmane.comp.sysutils.backup.bacula.devel/11876/
+
+ In addition I'm not sure if this would be the same as respecting the
+ drive's "Maximum Concurrent Jobs" setting.
+
+ Example:
+
+ Storage {
+ Name = Neo4100
+ Address = ....
+ SDPort = 9103
+ Password = "wiped"
+ Device = Neo4100
+ Media Type = LTO4
+ Autochanger = yes
+ Maximum Concurrent Jobs = 3
+ }
+
+ Storage {
+ Name = Neo4100-LTO4-D1
+ Address = ....
+ SDPort = 9103
+ Password = "wiped"
+ Device = ULTRIUM-TD4-D1
+ Media Type = LTO4
+ Maximum Concurrent Jobs = 1
+ }
+
+ [2 more drives]
+
+ The "Maximum Concurrent Jobs = 1" directive in the drive's section is
+ ignored.
+
+
+Item 24: Implementation of running Job speed limit.
+Origin: Alex F, alexxzell at yahoo dot com
+Date: 29 January 2009
+
+What: I noticed the need for an integrated bandwidth limiter for
+ running jobs. It would be very useful just to specify another
+ field in bacula-dir.conf, like speed = how much speed you wish
+ for that specific job to run at
+
+Why: Because of a couple of reasons. First, it's very hard to implement a
+ traffic shaping utility and also make it reliable. Second, it is very
+ uncomfortable to have to implement these apps to, let's say 50 clients
+ (including desktops, servers). This would also be unreliable because you
+ have to make sure that the apps are properly working when needed; users
+ could also disable them (accidentally or not). It would be very useful
+ to provide Bacula this ability. All information would be centralized,
+ you would not have to go to 50 different clients in 10 different
+ locations for configuration; eliminating 3rd party additions help in
+ establishing efficiency. Would also avoid bandwidth congestion,
+ especially where there is little available.
+
+
+Item 25: Add an override in Schedule for Pools based on backup types
+Date: 19 Jan 2005
+Origin: Chad Slater <chad.slater@clickfox.com>
+Status:
+
+ What: Adding a FullStorage=BigTapeLibrary in the Schedule resource
+ would help those of us who use different storage devices for different
+ backup levels cope with the "auto-upgrade" of a backup.
+
+ Why: Assume I add several new devices to be backed up, i.e. several
+ hosts with 1TB RAID. To avoid tape switching hassles, incrementals are
+ stored in a disk set on a 2TB RAID. If you add these devices in the
+ middle of the month, the incrementals are upgraded to "full" backups,
+ but they try to use the same storage device as requested in the
+ incremental job, filling up the RAID holding the differentials. If we
+ could override the Storage parameter for full and/or differential
+ backups, then the Full job would use the proper Storage device, which
+ has more capacity (i.e. a 8TB tape library.
+
+
+Item 26: Automatic promotion of backup levels based on backup size
+ Date: 19 January 2006
+ Origin: Adam Thornton <athornton@sinenomine.net>
+ Status:
+
+ What: Other backup programs have a feature whereby it estimates the space
+ that a differential, incremental, and full backup would take. If
+ the difference in space required between the scheduled level and the
+ next level up is beneath some user-defined critical threshold, the
+ backup level is bumped to the next type. Doing this minimizes the
+ number of volumes necessary during a restore, with a fairly minimal
+ cost in backup media space.
+
+ Why: I know at least one (quite sophisticated and smart) user for whom the
+ absence of this feature is a deal-breaker in terms of using Bacula;
+ if we had it it would eliminate the one cool thing other backup
+ programs can do and we can't (at least, the one cool thing I know
+ of).
+
+
+Item 27: Allow inclusion/exclusion of files in a fileset by creation/mod times
+ Origin: Evan Kaufman <evan.kaufman@gmail.com>
+ Date: January 11, 2006
+ Status:
+
+ What: In the vein of the Wild and Regex directives in a Fileset's
+ Options, it would be helpful to allow a user to include or exclude
+ files and directories by creation or modification times.
+
+ You could factor the Exclude=yes|no option in much the same way it
+ affects the Wild and Regex directives. For example, you could exclude
+ all files modified before a certain date:
+
+ Options {
+ Exclude = yes
+ Modified Before = ####
+ }
+
+ Or you could exclude all files created/modified since a certain date:
+
+ Options {
+ Exclude = yes
+ Created Modified Since = ####
+ }
+
+ The format of the time/date could be done several ways, say the number
+ of seconds since the epoch:
+ 1137008553 = Jan 11 2006, 1:42:33PM # result of `date +%s`
+
+ Or a human readable date in a cryptic form:
+ 20060111134233 = Jan 11 2006, 1:42:33PM # YYYYMMDDhhmmss
+
+ Why: I imagine a feature like this could have many uses. It would
+ allow a user to do a full backup while excluding the base operating
+ system files, so if I installed a Linux snapshot from a CD yesterday,
+ I'll *exclude* all files modified *before* today. If I need to
+ recover the system, I use the CD I already have, plus the tape backup.
+ Or if, say, a Windows client is hit by a particularly corrosive
+ virus, and I need to *exclude* any files created/modified *since* the
+ time of infection.
+
+ Notes: Of course, this feature would work in concert with other
+ in/exclude rules, and wouldnt override them (or each other).
+
+ Notes: The directives I'd imagine would be along the lines of
+ "[Created] [Modified] [Before|Since] = <date>".
+ So one could compare against 'ctime' and/or 'mtime', but ONLY 'before'
+ or 'since'.
+
+
+Item 28: Archival (removal) of User Files to Tape
+ Date: Nov. 24/2005
+ Origin: Ray Pengelly [ray at biomed dot queensu dot ca
+ Status:
+
+ What: The ability to archive data to storage based on certain parameters
+ such as age, size, or location. Once the data has been written to
+ storage and logged it is then pruned from the originating
+ filesystem. Note! We are talking about user's files and not
+ Bacula Volumes.
+
+ Why: This would allow fully automatic storage management which becomes
+ useful for large datastores. It would also allow for auto-staging
+ from one media type to another.
+
+ Example 1) Medical imaging needs to store large amounts of data.
+ They decide to keep data on their servers for 6 months and then put
+ it away for long term storage. The server then finds all files
+ older than 6 months writes them to tape. The files are then removed
+ from the server.
+
+ Example 2) All data that hasn't been accessed in 2 months could be
+ moved from high-cost, fibre-channel disk storage to a low-cost
+ large-capacity SATA disk storage pool which doesn't have as quick of
+ access time. Then after another 6 months (or possibly as one
+ storage pool gets full) data is migrated to Tape.
+
+
+Item 29: An option to operate on all pools with update vol parameters
+ Origin: Dmitriy Pinchukov <absh@bossdev.kiev.ua>
+ Date: 16 August 2006
+ Status: Patch made by Nigel Stepp
+
+ What: When I do update -> Volume parameters -> All Volumes
+ from Pool, then I have to select pools one by one. I'd like
+ console to have an option like "0: All Pools" in the list of
+ defined pools.
+
+ Why: I have many pools and therefore unhappy with manually
+ updating each of them using update -> Volume parameters -> All
+ Volumes from Pool -> pool #.
+
+
+Item 30: Automatic disabling of devices
+ Date: 2005-11-11
+ Origin: Peter Eriksson <peter at ifm.liu dot se>
+ Status:
+
+ What: After a configurable amount of fatal errors with a tape drive
+ Bacula should automatically disable further use of a certain
+ tape drive. There should also be "disable"/"enable" commands in
+ the "bconsole" tool.
+
+ Why: On a multi-drive jukebox there is a possibility of tape drives
+ going bad during large backups (needing a cleaning tape run,
+ tapes getting stuck). It would be advantageous if Bacula would
+ automatically disable further use of a problematic tape drive
+ after a configurable amount of errors has occurred.
+
+ An example: I have a multi-drive jukebox (6 drives, 380+ slots)
+ where tapes occasionally get stuck inside the drive. Bacula will
+ notice that the "mtx-changer" command will fail and then fail
+ any backup jobs trying to use that drive. However, it will still
+ keep on trying to run new jobs using that drive and fail -
+ forever, and thus failing lots and lots of jobs... Since we have
+ many drives Bacula could have just automatically disabled
+ further use of that drive and used one of the other ones
+ instead.
+
+
+Item 31: List InChanger flag when doing restore.
+ Origin: Jesper Krogh<jesper@krogh.cc>
+ Date: 17 Oct 2008
+ Status: Done in version 3.0.2
+
+ What: When doing a restore the restore selection dialog ends by telling
+ stuff like this:
+ The job will require the following
+ Volume(s) Storage(s) SD Device(s)
+ ===========================================================================
+ 000741L3 LTO-4 LTO3
+ 000866L3 LTO-4 LTO3
+ 000765L3 LTO-4 LTO3
+ 000764L3 LTO-4 LTO3
+ 000756L3 LTO-4 LTO3
+ 001759L3 LTO-4 LTO3
+ 001763L3 LTO-4 LTO3
+ 001762L3 LTO-4 LTO3
+ 001767L3 LTO-4 LTO3
+
+ When having an autochanger, it would be really nice with an inChanger
+ column so the operator knew if this restore job would stop waiting for
+ operator intervention. This is done just by selecting the inChanger flag
+ from the catalog and printing it in a seperate column.
+
+
+ Why: This would help getting large restores through minimizing the
+ time spent waiting for operator to drop by and change tapes in the library.
+
+ Notes: [Kern] I think it would also be good to have the Slot as well,
+ or some indication that Bacula thinks the volume is in the autochanger
+ because it depends on both the InChanger flag and the Slot being
+ valid.
+
+
+Item 32: Ability to defer Batch Insert to a later time
+ Date: 26 April 2009
+ Origin: Eric
+ Status:
+
+ What: Instead of doing a Job Batch Insert at the end of the Job
+ which might create resource contention with lots of Job,
+ defer the insert to a later time.
+
+ Why: Permits to focus on getting the data on the Volume and
+ putting the metadata into the Catalog outside the backup
+ window.
+
+ Notes: Will use the proposed Bacula ASCII database import/export
+ format (i.e. dependent on the import/export entities project).
+
+
+Item 33: Add MaxVolumeSize/MaxVolumeBytes statement to Storage resource
+ Origin: Bastian Friedrich <bastian.friedrich@collax.com>
+ Date: 2008-07-09
+ Status: -
+
+ What: SD has a "Maximum Volume Size" statement, which is deprecated and
+ superseded by the Pool resource statement "Maximum Volume Bytes".
+ It would be good if either statement could be used in Storage
+ resources.
+
+ Why: Pools do not have to be restricted to a single storage type/device;
+ thus, it may be impossible to define Maximum Volume Bytes in the
+ Pool resource. The old MaxVolSize statement is deprecated, as it
+ is SD side only. I am using the same pool for different devices.
+
+ Notes: State of idea currently unknown. Storage resources in the dir
+ config currently translate to very slim catalog entries; these
+ entries would require extensions to implement what is described
+ here. Quite possibly, numerous other statements that are currently
+ available in Pool resources could be used in Storage resources too
+ quite well.
+
+
+Item 34: Enable persistent naming/number of SQL queries
+ Date: 24 Jan, 2007
+ Origin: Mark Bergman
+ Status:
+
+ What:
+ Change the parsing of the query.sql file and the query command so that
+ queries are named/numbered by a fixed value, not their order in the
+ file.
+
+
+ Why:
+ One of the real strengths of bacula is the ability to query the
+ database, and the fact that complex queries can be saved and
+ referenced from a file is very powerful. However, the choice
+ of query (both for interactive use, and by scripting input
+ to the bconsole command) is completely dependent on the order
+ within the query.sql file. The descriptve labels are helpful for
+ interactive use, but users become used to calling a particular
+ query "by number", or may use scripts to execute queries. This
+ presents a problem if the number or order of queries in the file
+ changes.
+
+ If the query.sql file used the numeric tags as a real value (rather
+ than a comment), then users could have a higher confidence that they
+ are executing the intended query, that their local changes wouldn't
+ conflict with future bacula upgrades.
+
+ For scripting, it's very important that the intended query is
+ what's actually executed. The current method of parsing the
+ query.sql file discourages scripting because the addition or
+ deletion of queries within the file will require corresponding
+ changes to scripts. It may not be obvious to users that deleting
+ query "17" in the query.sql file will require changing all
+ references to higher numbered queries. Similarly, when new
+ bacula distributions change the number of "official" queries,
+ user-developed queries cannot simply be appended to the file
+ without also changing any references to those queries in scripts
+ or procedural documentation, etc.
+
+ In addition, using fixed numbers for queries would encourage more
+ user-initiated development of queries, by supporting conventions
+ such as:
+
+ queries numbered 1-50 are supported/developed/distributed by
+ with official bacula releases
+
+ queries numbered 100-200 are community contributed, and are
+ related to media management
+
+ queries numbered 201-300 are community contributed, and are
+ related to checksums, finding duplicated files across
+ different backups, etc.
+
+ queries numbered 301-400 are community contributed, and are
+ related to backup statistics (average file size, size per
+ client per backup level, time for all clients by backup level,
+ storage capacity by media type, etc.)
+
+ queries numbered 500-999 are locally created
+
+ Notes:
+ Alternatively, queries could be called by keyword (tag), rather
+ than by number.
+
+
+Item 35: Port bat to Win32
+ Date: 26 April 2009
+ Origin: Kern/Eric
+ Status:
+
+ What: Make bat run on Win32/64.
+
+ Why: To have GUI on Windows
+
+ Notes:
+
+
+Item 36: Bacula Dir, FD and SD to support proxies
+Origin: Karl Grindley @ MIT Lincoln Laboratory <kgrindley at ll dot mit dot edu>
+Date: 25 March 2009
+Status: proposed
+
+What: Support alternate methods for nailing up a TCP session such
+ as SOCKS5, SOCKS4 and HTTP (CONNECT) proxies. Such a feature
+ would allow tunneling of bacula traffic in and out of proxied
+ networks.
+
+Why: Currently, bacula is architected to only function on a flat network, with
+ no barriers or limitations. Due to the large configuration states of
+ any network and the infinite configuration where file daemons and
+ storage daemons may sit in relation to one another, bacula often is
+ not usable on a network where filtered or air-gaped networks exist.
+ While often solutions such as ACL modifications to firewalls or port
+ redirection via SNAT or DNAT will solve the issue, often however,
+ these solutions are not adequate or not allowed by hard policy.
+
+ In an air-gapped network with only a highly locked down proxy services
+ are provided (SOCKS4/5 and/or HTTP and/or SSH outbound) ACLs or
+ iptable rules will not work.
+
+Notes: Director resource tunneling: This configuration option to utilize a
+ proxy to connect to a client should be specified in the client
+ resource Client resource tunneling: should be configured in the client
+ resource in the director config file? Or configured on the bacula-fd
+ configuration file on the fd host itself? If the ladder, this would
+ allow only certain clients to use a proxy, where others do not when
+ establishing the TCP connection to the storage server.
+
+ Also worth noting, there are other 3rd party, light weight apps that
+ could be utilized to bootstrap this. Instead of sockifing bacula
+ itself, use an external program to broker proxy authentication, and
+ connection to the remote host. OpenSSH does this by using the
+ "ProxyCommand" syntax in the client configuration and uses stdin and
+ stdout to the command. Connect.c is a very popular one.
+ (http://bent.latency.net/bent/darcs/goto-san-connect-1.85/src/connect.html).
+ One could also possibly use stunnel, netcat, etc.
+
+
+Item 37: Add Minumum Spool Size directive
+Date: 20 March 2008
+Origin: Frank Sweetser <fs@wpi.edu>
+
+ What: Add a new SD directive, "minimum spool size" (or similar). This
+ directive would specify a minimum level of free space available for
+ spooling. If the unused spool space is less than this level, any
+ new spooling requests would be blocked as if the "maximum spool
+ size" threshold had bee reached. Already spooling jobs would be
+ unaffected by this directive.
+
+ Why: I've been bitten by this scenario a couple of times:
+
+ Assume a maximum spool size of 100M. Two concurrent jobs, A and B,
+ are both running. Due to timing quirks and previously running jobs,
+ job A has used 99.9M of space in the spool directory. While A is
+ busy despooling to disk, B is happily using the remaining 0.1M of
+ spool space. This ends up in a spool/despool sequence every 0.1M of
+ data. In addition to fragmenting the data on the volume far more
+ than was necessary, in larger data sets (ie, tens or hundreds of
+ gigabytes) it can easily produce multi-megabyte report emails!
+
+
+Item 38: Backup and Restore of Windows Encrypted Files using Win raw encryption
+ Origin: Michael Mohr, SAG Mohr.External@infineon.com
+ Date: 22 February 2008
+ Origin: Alex Ehrlich (Alex.Ehrlich-at-mail.ee)
+ Date: 05 August 2008
+ Status:
+
+ What: Make it possible to backup and restore Encypted Files from and to
+ Windows systems without the need to decrypt it by using the raw
+ encryption functions API (see:
+ http://msdn2.microsoft.com/en-us/library/aa363783.aspx)
+ that is provided for that reason by Microsoft.
+ If a file ist encrypted could be examined by evaluating the
+ FILE_ATTRIBUTE_ENCRYTED flag of the GetFileAttributes
+ function.
+ For each file backed up or restored by FD on Windows, check if
+ the file is encrypted; if so then use OpenEncryptedFileRaw,
+ ReadEncryptedFileRaw, WriteEncryptedFileRaw,
+ CloseEncryptedFileRaw instead of BackupRead and BackupWrite
+ API calls.
+
+ Why: Without the usage of this interface the fd-daemon running
+ under the system account can't read encypted Files because
+ the key needed for the decrytion is missed by them. As a result
+ actually encrypted files are not backed up
+ by bacula and also no error is shown while missing these files.
+
+ Notes: Using xxxEncryptedFileRaw API would allow to backup and
+ restore EFS-encrypted files without decrypting their data.
+ Note that such files cannot be restored "portably" (at least,
+ easily) but they would be restoreable to a different (or
+ reinstalled) Win32 machine; the restore would require setup
+ of a EFS recovery agent in advance, of course, and this shall
+ be clearly reflected in the documentation, but this is the
+ normal Windows SysAdmin's business.
+ When "portable" backup is requested the EFS-encrypted files
+ shall be clearly reported as errors.
+ See MSDN on the "Backup and Restore of Encrypted Files" topic:
+ http://msdn.microsoft.com/en-us/library/aa363783.aspx
+ Maybe the EFS support requires a new flag in the database for
+ each file, too?
+ Unfortunately, the implementation is not as straightforward as
+ 1-to-1 replacement of BackupRead with ReadEncryptedFileRaw,
+ requiring some FD code rewrite to work with
+ encrypted-file-related callback functions.
+
+
+Item 39: Implement an interface between Bacula and Storage clould like Amazon's S3.
+ Date: 25 August 2008
+ Origin: Soren Hansen <soren@ubuntu.com>
+ Status: Not started.
+ What: Enable the storage daemon to store backup data on Amazon's
+ S3 service.
+
+ Why: Amazon's S3 is a cheap way to store data off-site.
+
+ Notes: If we configure the Pool to put only one job per volume (they don't
+ support append operation), and the volume size isn't to big (100MB?),
+ it should be easy to adapt the disk-changer script to add get/put
+ procedure with curl. So, the data would be safetly copied during the
+ Job.
+
+ Cloud should be only used with Copy jobs, users should always have
+ a copy of their data on their site.
+
+ We should also think to have our own cache, trying always to have
+ cloud volume on the local disk. (I don't know if users want to store
+ 100GB on cloud, so it shouldn't be a disk size problem). For example,
+ if bacula want to recycle a volume, it will start by downloading the
+ file to truncate it few seconds later, if we can avoid that...
+
+Item 40: Convert Bacula existing tray monitor on Windows to a stand alone program
+ Date: 26 April 2009
+ Origin: Kern/Eric
+ Status:
+
+ What: Separate Win32 tray monitor to be a separate program.
+
+ Why: Vista does not allow SYSTEM services to interact with the
+ desktop, so the current tray monitor does not work on Vista
+ machines.
+
+ Notes: Requires communicating with the FD via the network (simulate
+ a console connection).
+
+
+
+========= End items voted on May 2009 ==================
+
+========= New items after last vote ====================
+
+Item 1: Relabel disk volume after recycling
+ Origin: Pasi Kärkkäinen <pasik@iki.fi>
+ Date: 07 May 2009.
+ Status: Not implemented yet, no code written.
+
+ What: The ability to relabel the disk volume (and thus rename the file on the
+ disk) after it has been recycled. Useful when you have a single job
+ per disk volume, and you use a custom Label format, for example:
+ Label Format =
+ "${Client}-${Level}-${NumVols:p/4/0/r}-${Year}_${Month}_${Day}-${Hour}_${Minute}"
+
+ Why: Disk volumes in Bacula get the label/filename when they are used for the
+ first time. If you use recycling and custom label format like above,
+ the disk volume name doesn't match the contents after it has been
+ recycled. This feature makes it possible to keep the label/filename
+ in sync with the content and thus makes it easy to check/monitor the
+ backups from the shell and/or normal file management tools, because
+ the filenames of the disk volumes match the content.
+
+ Notes: The configuration option could be "Relabel after Recycling = Yes".
+
+Item n: Command that releases all drives in an autochanger
+ Origin: Blake Dunlap (blake@nxs.net)
+ Date: 10/07/2009
+ Status: Request
+
+ What: It would be nice if there was a release command that
+ would release all drives in an autochanger instead of having to
+ do each one in turn.
+
+ Why: It can take some time for a release to occur, and the
+ commands must be given for each drive in turn, which can quicky
+ scale if there are several drives in the library. (Having to
+ watch the console, to give each command can waste a good bit of
+ time when you start getting into the 16 drive range when the
+ tapes can take up to 3 minutes to eject each)
+
+ Notes: Due to the way some autochangers/libraries work, you
+ cannot assume that new tapes inserted will go into slots that are
+ not currently believed to be in use by bacula (the tape from that
+ slot is in a drive). This would make any changes in
+ configuration quicker/easier, as all drives need to be released
+ before any modifications to slots.
+
+Item n: Run bscan on a remote storage daemon from within bconsole.
+ Date: 07 October 2009
+ Origin: Graham Keeling <graham@equiinet.com>
+ Status: Proposing
+
+ What: The ability to be able to run bscan on a remote storage daemon from
+ within bconsole in order to populate your catalog.
+
+ Why: Currently, it seems you have to:
+ a) log in to a console on the remote machine
+ b) figure out where the storage daemon config file is
+ c) figure out the storage device from the config file
+ d) figure out the catalog IP address
+ e) figure out the catalog port
+ f) open the port on the catalog firewall
+ g) configure the catalog database to accept connections from the
+ remote host
+ h) build a 'bscan' command from (b)-(e) above and run it
+ It would be much nicer to be able to type something like this into
+ bconsole:
+ *bscan storage=<storage> device=<device> volume=<volume>
+ or something like:
+ *bscan storage=<storage> all
+ It seems to me that the scan could also do a better job than the
+ external bscan program currently does. It would possibly be able to
+ deduce some extra details, such as the catalog StorageId for the
+ volumes.
+
+ Notes: (Kern). If you need to do a bscan, you have done something wrong,
+ so this functionality should not need to be integrated into the
+ the Storage daemon. However, I am not opposed to someone implementing
+ this feature providing that all the code is in a shared object (or dll)
+ and does not add significantly to the size of the Storage daemon. In
+ addition, the code should be written in a way such that the same source
+ code is used in both the bscan program and the Storage daemon to avoid
+ adding a lot of new code that must be maintained by the project.
+
+Item n: Implement a Migration job type that will create a reverse
+ incremental (or decremental) backup from two existing full backups.
+ Date: 05 October 2009
+ Origin: Griffith College Dublin. Some sponsorship available.
+ Contact: Gavin McCullagh <gavin.mccullagh@gcd.ie>
+ Status:
+
+ What: The ability to take two full backup jobs and derive a reverse
+ incremental backup from them. The older full backup data may then
+ be discarded.
+
+ Why: Long-term backups based on keeping full backups can be expensive in
+ media. In many cases (eg a NAS), as the client accumulates files
+ over months and years, the same file will be duplicated unchanged,
+ across many media and datasets. Eg, Less than 10% (and
+ shrinking) of our monthly full mail server backup is new files,
+ the other 90% is also in the previous full backup.
+ Regularly converting the oldest full backup into a reverse
+ incremental backup allows the admin to keep access to old backup
+ jobs, but remove all of the duplicated files, freeing up media.
+
+ Notes: This feature was previously discussed on the bacula-devel list
+ here: http://www.mail-archive.com/bacula-devel@lists.sourceforge.net/msg04962.html
+
+
+========= Add new items above this line =================
+
+
+============= Empty Feature Request form ===========
+Item n: One line summary ...
+ Date: Date submitted
+ Origin: Name and email of originator.
+ Status:
+
+ What: More detailed explanation ...
+
+ Why: Why it is important ...
+
+ Notes: Additional notes or features (omit if not used)
+============== End Feature Request form ==============
+
+
+========== Items put on hold by Kern ============================