+ What: Make it possible to backup and restore Encypted Files from and to
+ Windows systems without the need to decrypt it by using the raw
+ encryption functions API (see:
+ http://msdn2.microsoft.com/en-us/library/aa363783.aspx)
+ that is provided for that reason by Microsoft.
+ If a file ist encrypted could be examined by evaluating the
+ FILE_ATTRIBUTE_ENCRYTED flag of the GetFileAttributes
+ function.
+ For each file backed up or restored by FD on Windows, check if
+ the file is encrypted; if so then use OpenEncryptedFileRaw,
+ ReadEncryptedFileRaw, WriteEncryptedFileRaw,
+ CloseEncryptedFileRaw instead of BackupRead and BackupWrite
+ API calls.
+
+ Why: Without the usage of this interface the fd-daemon running
+ under the system account can't read encypted Files because
+ the key needed for the decrytion is missed by them. As a result
+ actually encrypted files are not backed up
+ by bacula and also no error is shown while missing these files.
+
+ Notes: Using xxxEncryptedFileRaw API would allow to backup and
+ restore EFS-encrypted files without decrypting their data.
+ Note that such files cannot be restored "portably" (at least,
+ easily) but they would be restoreable to a different (or
+ reinstalled) Win32 machine; the restore would require setup
+ of a EFS recovery agent in advance, of course, and this shall
+ be clearly reflected in the documentation, but this is the
+ normal Windows SysAdmin's business.
+ When "portable" backup is requested the EFS-encrypted files
+ shall be clearly reported as errors.
+ See MSDN on the "Backup and Restore of Encrypted Files" topic:
+ http://msdn.microsoft.com/en-us/library/aa363783.aspx
+ Maybe the EFS support requires a new flag in the database for
+ each file, too?
+ Unfortunately, the implementation is not as straightforward as
+ 1-to-1 replacement of BackupRead with ReadEncryptedFileRaw,
+ requiring some FD code rewrite to work with
+ encrypted-file-related callback functions.
+
+
+Item 39: Implement an interface between Bacula and Storage clould like Amazon's S3.
+ Date: 25 August 2008
+ Origin: Soren Hansen <soren@ubuntu.com>
+ Status: Not started.
+ What: Enable the storage daemon to store backup data on Amazon's
+ S3 service.
+
+ Why: Amazon's S3 is a cheap way to store data off-site.
+
+ Notes: If we configure the Pool to put only one job per volume (they don't
+ support append operation), and the volume size isn't to big (100MB?),
+ it should be easy to adapt the disk-changer script to add get/put
+ procedure with curl. So, the data would be safetly copied during the
+ Job.
+
+ Cloud should be only used with Copy jobs, users should always have
+ a copy of their data on their site.
+
+ We should also think to have our own cache, trying always to have
+ cloud volume on the local disk. (I don't know if users want to store
+ 100GB on cloud, so it shouldn't be a disk size problem). For example,
+ if bacula want to recycle a volume, it will start by downloading the
+ file to truncate it few seconds later, if we can avoid that...
+
+Item 40: Convert Bacula existing tray monitor on Windows to a stand alone program
+ Date: 26 April 2009
+ Origin: Kern/Eric
+ Status:
+
+ What: Separate Win32 tray monitor to be a separate program.
+
+ Why: Vista does not allow SYSTEM services to interact with the
+ desktop, so the current tray monitor does not work on Vista
+ machines.
+
+ Notes: Requires communicating with the FD via the network (simulate
+ a console connection).
+
+
+
+========= End items voted on May 2009 ==================
+
+========= New items after last vote ====================
+
+Item 1: Relabel disk volume after recycling
+ Origin: Pasi Kärkkäinen <pasik@iki.fi>
+ Date: 07 May 2009.
+ Status: Not implemented yet, no code written.
+
+ What: The ability to relabel the disk volume (and thus rename the file on the
+ disk) after it has been recycled. Useful when you have a single job
+ per disk volume, and you use a custom Label format, for example:
+ Label Format =
+ "${Client}-${Level}-${NumVols:p/4/0/r}-${Year}_${Month}_${Day}-${Hour}_${Minute}"
+
+ Why: Disk volumes in Bacula get the label/filename when they are used for the
+ first time. If you use recycling and custom label format like above,
+ the disk volume name doesn't match the contents after it has been
+ recycled. This feature makes it possible to keep the label/filename
+ in sync with the content and thus makes it easy to check/monitor the
+ backups from the shell and/or normal file management tools, because
+ the filenames of the disk volumes match the content.
+
+ Notes: The configuration option could be "Relabel after Recycling = Yes".
+
+Item n: Command that releases all drives in an autochanger
+ Origin: Blake Dunlap (blake@nxs.net)
+ Date: 10/07/2009
+ Status: Request
+
+ What: It would be nice if there was a release command that
+ would release all drives in an autochanger instead of having to
+ do each one in turn.
+
+ Why: It can take some time for a release to occur, and the
+ commands must be given for each drive in turn, which can quicky
+ scale if there are several drives in the library. (Having to
+ watch the console, to give each command can waste a good bit of
+ time when you start getting into the 16 drive range when the
+ tapes can take up to 3 minutes to eject each)
+
+ Notes: Due to the way some autochangers/libraries work, you
+ cannot assume that new tapes inserted will go into slots that are
+ not currently believed to be in use by bacula (the tape from that
+ slot is in a drive). This would make any changes in
+ configuration quicker/easier, as all drives need to be released
+ before any modifications to slots.
+
+Item n: Run bscan on a remote storage daemon from within bconsole.
+ Date: 07 October 2009
+ Origin: Graham Keeling <graham@equiinet.com>
+ Status: Proposing
+
+ What: The ability to be able to run bscan on a remote storage daemon from
+ within bconsole in order to populate your catalog.
+
+ Why: Currently, it seems you have to:
+ a) log in to a console on the remote machine
+ b) figure out where the storage daemon config file is
+ c) figure out the storage device from the config file
+ d) figure out the catalog IP address
+ e) figure out the catalog port
+ f) open the port on the catalog firewall
+ g) configure the catalog database to accept connections from the
+ remote host
+ h) build a 'bscan' command from (b)-(e) above and run it
+ It would be much nicer to be able to type something like this into
+ bconsole:
+ *bscan storage=<storage> device=<device> volume=<volume>
+ or something like:
+ *bscan storage=<storage> all
+ It seems to me that the scan could also do a better job than the
+ external bscan program currently does. It would possibly be able to
+ deduce some extra details, such as the catalog StorageId for the
+ volumes.
+
+ Notes: (Kern). If you need to do a bscan, you have done something wrong,
+ so this functionality should not need to be integrated into the
+ the Storage daemon. However, I am not opposed to someone implementing
+ this feature providing that all the code is in a shared object (or dll)
+ and does not add significantly to the size of the Storage daemon. In
+ addition, the code should be written in a way such that the same source
+ code is used in both the bscan program and the Storage daemon to avoid
+ adding a lot of new code that must be maintained by the project.
+
+Item n: Implement a Migration job type that will create a reverse
+ incremental (or decremental) backup from two existing full backups.
+ Date: 05 October 2009
+ Origin: Griffith College Dublin. Some sponsorship available.
+ Contact: Gavin McCullagh <gavin.mccullagh@gcd.ie>
+ Status:
+
+ What: The ability to take two full backup jobs and derive a reverse
+ incremental backup from them. The older full backup data may then
+ be discarded.
+
+ Why: Long-term backups based on keeping full backups can be expensive in
+ media. In many cases (eg a NAS), as the client accumulates files
+ over months and years, the same file will be duplicated unchanged,
+ across many media and datasets. Eg, Less than 10% (and
+ shrinking) of our monthly full mail server backup is new files,
+ the other 90% is also in the previous full backup.
+ Regularly converting the oldest full backup into a reverse
+ incremental backup allows the admin to keep access to old backup
+ jobs, but remove all of the duplicated files, freeing up media.
+
+ Notes: This feature was previously discussed on the bacula-devel list
+ here: http://www.mail-archive.com/bacula-devel@lists.sourceforge.net/msg04962.html
+
+
+========= Add new items above this line =================
+