+#
+# An autochanger device with two drives
+#
+#Autochanger {
+# Name = Autochanger
+# Device = Drive-1
+# Device = Drive-2
+# Changer Command = "/home/kern/bacula/bin/mtx-changer %c %o %S %a %d"
+# Changer Device = /dev/sg0
+#}
+
+#Device {
+# Name = Drive-1 #
+# Drive Index = 0
+# Media Type = DLT-8000
+# Archive Device = /dev/nst0
+# AutomaticMount = yes; # when device opened, read it
+# AlwaysOpen = yes;
+# RemovableMedia = yes;
+# RandomAccess = no;
+# AutoChanger = yes
+# #
+# # Enable the Alert command only if you have the mtx package loaded
+# # Note, apparently on some systems, tapeinfo resets the SCSI controller
+# # thus if you turn this on, make sure it does not reset your SCSI
+# # controller. I have never had any problems, and smartctl does
+# # not seem to cause such problems.
+# #
+# Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'"
+# If you have smartctl, enable this, it has more info than tapeinfo
+# Alert Command = "sh -c 'smartctl -H -l error %c'"
+#}
+
+#Device {
+# Name = Drive-2 #
+# Drive Index = 1
+# Media Type = DLT-8000
+# Archive Device = /dev/nst1
+# AutomaticMount = yes; # when device opened, read it
+# AlwaysOpen = yes;
+# RemovableMedia = yes;
+# RandomAccess = no;
+# AutoChanger = yes
+# # Enable the Alert command only if you have the mtx package loaded
+# Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'"
+# If you have smartctl, enable this, it has more info than tapeinfo
+# Alert Command = "sh -c 'smartctl -H -l error %c'"
+#}
+