kes Change Bacula trademark owner from John Walker to Kern Sibbald

[bacula/bacula] / bacula / src / stored / btape.c

diff --git a/bacula/src/stored/btape.c b/bacula/src/stored/btape.c
index 9062465fdd899cc10b6b2f9b0ce5a78025301671..f0649111835a67f081249b0ab163b32519978599 100644 (file)
--- a/bacula/src/stored/btape.c
+++ b/bacula/src/stored/btape.c
@@ -1,3 +1,30 @@
+/*
+   Bacula® - The Network Backup Solution
+
+   Copyright (C) 2000-2008 Free Software Foundation Europe e.V.
+
+   The main author of Bacula is Kern Sibbald, with contributions from
+   many others, a complete list can be found in the file AUTHORS.
+   This program is Free Software; you can redistribute it and/or
+   modify it under the terms of version two of the GNU General Public
+   License as published by the Free Software Foundation and included
+   in the file LICENSE.
+
+   This program is distributed in the hope that it will be useful, but
+   WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+   General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with this program; if not, write to the Free Software
+   Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+   02110-1301, USA.
+
+   Bacula® is a registered trademark of Kern Sibbald.
+   The licensor of Bacula is the Free Software Foundation Europe
+   (FSFE), Fiduciary Program, Sumatrastrasse 25, 8006 Zürich,
+   Switzerland, email:ftf@fsfeurope.org.
+*/

 /*
  *
  *   Bacula Tape manipulation program
 /*
  *
  *   Bacula Tape manipulation program


@@ -13,29 +40,17 @@
  *   Version $Id$
  *
  */
  *   Version $Id$
  *
  */

-/*
-   Copyright (C) 2000-2004 Kern Sibbald and John Walker
-
-   This program is free software; you can redistribute it and/or
-   modify it under the terms of the GNU General Public License as
-   published by the Free Software Foundation; either version 2 of
-   the License, or (at your option) any later version.
-
-   This program is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-   General Public License for more details.
-
-   You should have received a copy of the GNU General Public
-   License along with this program; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place - Suite 330, Boston,
-   MA 02111-1307, USA.
-
- */

 
 #include "bacula.h"
 #include "stored.h"
 
 
 #include "bacula.h"
 #include "stored.h"
 

+#ifdef USE_VTAPE
+#include "vtape.h"
+#endif
+
+/* Dummy functions */
+int generate_daemon_event(JCR *jcr, const char *event) { return 1; }
+extern bool parse_sd_config(CONFIG *config, const char *configfile, int exit_code);

 
 /* External subroutines */
 extern void free_config_resources();
 
 /* External subroutines */
 extern void free_config_resources();


@@ -45,19 +60,22 @@ int quit = 0;
 char buf[100000];
 int bsize = TAPE_BSIZE;
 char VolName[MAX_NAME_LENGTH];
 char buf[100000];
 int bsize = TAPE_BSIZE;
 char VolName[MAX_NAME_LENGTH];

-bool forge_on = false;
+STORES *me = NULL;                    /* our Global resource */
+bool forge_on = false;                /* proceed inspite of I/O errors */
+pthread_mutex_t device_release_mutex = PTHREAD_MUTEX_INITIALIZER;
+pthread_cond_t wait_device_release = PTHREAD_COND_INITIALIZER;

 
 /*
 
 /*

- * If you change the format of the state file, 
+ * If you change the format of the state file,

  *  increment this value
  *  increment this value

- */ 
+ */

 static uint32_t btape_state_level = 2;
 
 DEVICE *dev = NULL;
 DCR *dcr;
 DEVRES *device = NULL;
 
 static uint32_t btape_state_level = 2;
 
 DEVICE *dev = NULL;
 DCR *dcr;
 DEVRES *device = NULL;
 

-           
+

 /* Forward referenced subroutines */
 static void do_tape_cmds();
 static void helpcmd();
 /* Forward referenced subroutines */
 static void do_tape_cmds();
 static void helpcmd();


@@ -66,6 +84,7 @@ static void rewindcmd();
 static void clearcmd();
 static void wrcmd();
 static void rrcmd();
 static void clearcmd();
 static void wrcmd();
 static void rrcmd();

+static void rbcmd();

 static void eodcmd();
 static void fillcmd();
 static void qfillcmd();
 static void eodcmd();
 static void fillcmd();
 static void qfillcmd();


@@ -78,15 +97,15 @@ static bool my_mount_next_read_volume(DCR *dcr);
 static void scan_blocks();
 static void set_volume_name(const char *VolName, int volnum);
 static void rawfill_cmd();
 static void scan_blocks();
 static void set_volume_name(const char *VolName, int volnum);
 static void rawfill_cmd();

-static void bfill_cmd();

 static bool open_the_device();
 static void autochangercmd();
 static void do_unfill();
 
 
 /* Static variables */
 static bool open_the_device();
 static void autochangercmd();
 static void do_unfill();
 
 
 /* Static variables */

+static CONFIG *config;

 #define CONFIG_FILE "bacula-sd.conf"
 #define CONFIG_FILE "bacula-sd.conf"

-char *configfile;
+char *configfile = NULL;

 
 #define MAX_CMD_ARGS 30
 static POOLMEM *cmd;
 
 #define MAX_CMD_ARGS 30
 static POOLMEM *cmd;


@@ -96,6 +115,7 @@ static char *argv[MAX_CMD_ARGS];
 static int argc;
 
 static int quickie_count = 0;
 static int argc;
 
 static int quickie_count = 0;

+static uint64_t write_count = 0;

 static BSR *bsr = NULL;
 static int signals = TRUE;
 static bool ok;
 static BSR *bsr = NULL;
 static int signals = TRUE;
 static bool ok;


@@ -123,7 +143,7 @@ static uint32_t last_block_num1 = 0;
 static uint32_t last_block_num2 = 0;
 static uint32_t last_block_num = 0;
 static uint32_t BlockNumber = 0;
 static uint32_t last_block_num2 = 0;
 static uint32_t last_block_num = 0;
 static uint32_t BlockNumber = 0;

-static bool simple = true; 
+static bool simple = true;

 
 static const char *VolumeName = NULL;
 static int vol_num = 0;
 
 static const char *VolumeName = NULL;
 static int vol_num = 0;


@@ -138,7 +158,7 @@ int get_cmd(const char *prompt);
 
 /*********************************************************************
  *
 
 /*********************************************************************
  *

- *        Main Bacula Pool Creation Program
+ *     Bacula tape testing program

  *
  */
 int main(int margc, char *margv[])
  *
  */
 int main(int margc, char *margv[])


@@ -147,24 +167,29 @@ int main(int margc, char *margv[])
    uint32_t x32, y32;
    uint64_t x64, y64;
    char buf[1000];
    uint32_t x32, y32;
    uint64_t x64, y64;
    char buf[1000];

+   
+   setlocale(LC_ALL, "");
+   bindtextdomain("bacula", LOCALEDIR);
+   textdomain("bacula");
+   init_stack_dump();

 
    /* Sanity checks */
 
    /* Sanity checks */

-   if (TAPE_BSIZE % DEV_BSIZE != 0 || TAPE_BSIZE / DEV_BSIZE == 0) {
-      Emsg2(M_ABORT, 0, "Tape block size (%d) not multiple of system size (%d)\n",
-        TAPE_BSIZE, DEV_BSIZE);
+   if (TAPE_BSIZE % B_DEV_BSIZE != 0 || TAPE_BSIZE / B_DEV_BSIZE == 0) {
+      Emsg2(M_ABORT, 0, _("Tape block size (%d) not multiple of system size (%d)\n"),
+         TAPE_BSIZE, B_DEV_BSIZE);

    }
    if (TAPE_BSIZE != (1 << (ffs(TAPE_BSIZE)-1))) {
    }
    if (TAPE_BSIZE != (1 << (ffs(TAPE_BSIZE)-1))) {

-      Emsg1(M_ABORT, 0, "Tape block size (%d) is not a power of 2\n", TAPE_BSIZE);
+      Emsg1(M_ABORT, 0, _("Tape block size (%d) is not a power of 2\n"), TAPE_BSIZE);

    }
    }

-   if (sizeof(off_t) < 8) {
-      Pmsg1(-1, "\n\n!!!! Warning large disk addressing disabled. off_t=%d should be 8 or more !!!!!\n\n\n",
-        sizeof(off_t));
+   if (sizeof(boffset_t) < 8) {
+      Pmsg1(-1, _("\n\n!!!! Warning large disk addressing disabled. boffset_t=%d should be 8 or more !!!!!\n\n\n"),
+         sizeof(boffset_t));

    }
    x32 = 123456789;
    bsnprintf(buf, sizeof(buf), "%u", x32);
    }
    x32 = 123456789;
    bsnprintf(buf, sizeof(buf), "%u", x32);

-   i = bsscanf(buf, "%u", &y32);
+   i = bsscanf(buf, "%lu", &y32);

    if (i != 1 || x32 != y32) {
    if (i != 1 || x32 != y32) {

-      Pmsg3(-1, "32 bit printf/scanf problem. i=%d x32=%u y32=%u\n", i, x32, y32);
+      Pmsg3(-1, _("32 bit printf/scanf problem. i=%d x32=%u y32=%u\n"), i, x32, y32);

       exit(1);
    }
    x64 = 123456789;
       exit(1);
    }
    x64 = 123456789;


@@ -173,62 +198,69 @@ int main(int margc, char *margv[])
    bsnprintf(buf, sizeof(buf), "%" llu, x64);
    i = bsscanf(buf, "%llu", &y64);
    if (i != 1 || x64 != y64) {
    bsnprintf(buf, sizeof(buf), "%" llu, x64);
    i = bsscanf(buf, "%llu", &y64);
    if (i != 1 || x64 != y64) {

-      Pmsg3(-1, "64 bit printf/scanf problem. i=%d x64=%" llu " y64=%" llu "\n", i, x64, y64);
+      Pmsg3(-1, _("64 bit printf/scanf problem. i=%d x64=%" llu " y64=%" llu "\n"), 
+            i, x64, y64);

       exit(1);
    }
 
       exit(1);
    }
 

-   printf("Tape block granularity is %d bytes.\n", TAPE_BSIZE);
+   printf(_("Tape block granularity is %d bytes.\n"), TAPE_BSIZE);

 
    working_directory = "/tmp";
    my_name_is(margc, margv, "btape");
    init_msg(NULL, NULL);
 
 
    working_directory = "/tmp";
    my_name_is(margc, margv, "btape");
    init_msg(NULL, NULL);
 

+   OSDependentInit();
+

    while ((ch = getopt(margc, margv, "b:c:d:psv?")) != -1) {
       switch (ch) {
       case 'b':                    /* bootstrap file */
    while ((ch = getopt(margc, margv, "b:c:d:psv?")) != -1) {
       switch (ch) {
       case 'b':                    /* bootstrap file */

-        bsr = parse_bsr(NULL, optarg);
-//      dump_bsr(bsr, true);
-        break;
+         bsr = parse_bsr(NULL, optarg);
+//       dump_bsr(bsr, true);
+         break;

 
       case 'c':                    /* specify config file */
 
       case 'c':                    /* specify config file */

-        if (configfile != NULL) {
-           free(configfile);
-        }
-        configfile = bstrdup(optarg);
-        break;
+         if (configfile != NULL) {
+            free(configfile);
+         }
+         configfile = bstrdup(optarg);
+         break;

 
       case 'd':                    /* set debug level */
 
       case 'd':                    /* set debug level */

-        debug_level = atoi(optarg);
-        if (debug_level <= 0) {
-           debug_level = 1; 
-        }
-        break;
+         if (*optarg == 't') {
+            dbg_timestamp = true;
+         } else {
+            debug_level = atoi(optarg);
+            if (debug_level <= 0) {
+               debug_level = 1;
+            }
+         }
+         break;

 
       case 'p':
 
       case 'p':

-        forge_on = true;
-        break;
+         forge_on = true;
+         break;

 
       case 's':
 
       case 's':

-        signals = false;
-        break;
+         signals = false;
+         break;

 
       case 'v':
 
       case 'v':

-        verbose++;
-        break;
+         verbose++;
+         break;

 
       case '?':
       default:
 
       case '?':
       default:

-        helpcmd();
-        exit(0);
+         helpcmd();
+         exit(0);

 
 

-      }  
+      }

    }
    margc -= optind;
    margv += optind;
 
    cmd = get_pool_memory(PM_FNAME);
    args = get_pool_memory(PM_FNAME);
    }
    margc -= optind;
    margv += optind;
 
    cmd = get_pool_memory(PM_FNAME);
    args = get_pool_memory(PM_FNAME);

-   
+

    if (signals) {
       init_signals(terminate_btape);
    }
    if (signals) {
       init_signals(terminate_btape);
    }


@@ -239,16 +271,16 @@ int main(int margc, char *margv[])
 
    daemon_start_time = time(NULL);
 
 
    daemon_start_time = time(NULL);
 

-   parse_config(configfile);
-
+   config = new_config_parser();
+   parse_sd_config(config, configfile, M_ERROR_TERM);

 
    /* See if we can open a device */
    if (margc == 0) {
 
    /* See if we can open a device */
    if (margc == 0) {

-      Pmsg0(000, "No archive name specified.\n");
+      Pmsg0(000, _("No archive name specified.\n"));

       usage();
       exit(1);
    } else if (margc != 1) {
       usage();
       exit(1);
    } else if (margc != 1) {

-      Pmsg0(000, "Improper number of arguments specified.\n");
+      Pmsg0(000, _("Improper number of arguments specified.\n"));

       usage();
       exit(1);
    }
       usage();
       exit(1);
    }


@@ -261,6 +293,16 @@ int main(int margc, char *margv[])
    if (!dev) {
       exit(1);
    }
    if (!dev) {
       exit(1);
    }

+   if (dev->is_dvd()) {
+      Pmsg0(000, _("btape does not work with DVD storage.\n"));
+      usage();
+      exit(1);
+   }
+   if (!dev->is_tape()) {
+      Pmsg0(000, _("btape only works with tape storage.\n"));
+      usage();
+      exit(1);
+   }

    dcr = jcr->dcr;
    if (!open_the_device()) {
       goto terminate;
    dcr = jcr->dcr;
    if (!open_the_device()) {
       goto terminate;


@@ -268,7 +310,7 @@ int main(int margc, char *margv[])
 
    Dmsg0(200, "Do tape commands\n");
    do_tape_cmds();
 
    Dmsg0(200, "Do tape commands\n");
    do_tape_cmds();

-  
+

 terminate:
    terminate_btape(0);
    return 0;
 terminate:
    terminate_btape(0);
    return 0;


@@ -281,7 +323,11 @@ static void terminate_btape(int stat)
    if (configfile) {
       free(configfile);
    }
    if (configfile) {
       free(configfile);
    }

-   free_config_resources();
+   if (config) {
+      config->free_resources();
+      free(config);
+      config = NULL;
+   }

    if (args) {
       free_pool_memory(args);
       args = NULL;
    if (args) {
       free_pool_memory(args);
       args = NULL;


@@ -299,11 +345,13 @@ static void terminate_btape(int stat)
    jcr = NULL;
 
    if (dev) {
    jcr = NULL;
 
    if (dev) {

-      term_dev(dev);
+      dev->term();

    }
 
    }
 

+   free_volume_list();
+

    if (debug_level > 10)
    if (debug_level > 10)

-      print_memory_pool_stats(); 
+      print_memory_pool_stats();

 
    if (this_block) {
       free_block(this_block);
 
    if (this_block) {
       free_block(this_block);


@@ -311,7 +359,8 @@ static void terminate_btape(int stat)
 
    stop_watchdog();
    term_msg();
 
    stop_watchdog();
    term_msg();

-   close_memory_pool();              /* free memory in pool */
+   close_memory_pool();               /* free memory in pool */
+   term_last_jobs_list();

 
    sm_dump(false);
    exit(stat);
 
    sm_dump(false);
    exit(stat);


@@ -320,22 +369,23 @@ static void terminate_btape(int stat)
 static bool open_the_device()
 {
    DEV_BLOCK *block;
 static bool open_the_device()
 {
    DEV_BLOCK *block;

-   
+   bool ok = true;
+

    block = new_block(dev);
    block = new_block(dev);

-   lock_device(dev);
-   if (!(dev->state & ST_OPENED)) {
-      Dmsg1(200, "Opening device %s\n", dcr->VolumeName);
-      if (open_dev(dev, dcr->VolumeName, OPEN_READ_WRITE) < 0) {
-         Emsg1(M_FATAL, 0, _("dev open failed: %s\n"), dev->errmsg);
-        unlock_device(dev);
-        free_block(block);
-        return false;
-      }
+   dev->r_dlock();
+   Dmsg1(200, "Opening device %s\n", dcr->VolumeName);
+   if (dev->open(dcr, OPEN_READ_WRITE) < 0) {
+      Emsg1(M_FATAL, 0, _("dev open failed: %s\n"), dev->errmsg);
+      ok = false;
+      goto bail_out;

    }
    }

-   Pmsg1(000, "open_dev %s OK\n", dev_name(dev));
-   unlock_device(dev);
+   Pmsg1(000, _("open device %s: OK\n"), dev->print_name());
+   dev->set_append();                 /* put volume in append mode */
+
+bail_out:
+   dev->dunlock();

    free_block(block);
    free_block(block);

-   return true;
+   return ok;

 }
 
 
 }
 
 


@@ -345,30 +395,31 @@ void quitcmd()
 }
 
 /*
 }
 
 /*

- * Write a label to the tape   
+ * Write a label to the tape

  */
 static void labelcmd()
 {
    if (VolumeName) {
       pm_strcpy(cmd, VolumeName);
    } else {
  */
 static void labelcmd()
 {
    if (VolumeName) {
       pm_strcpy(cmd, VolumeName);
    } else {

-      if (!get_cmd("Enter Volume Name: ")) {
-        return;
+      if (!get_cmd(_("Enter Volume Name: "))) {
+         return;

       }
    }
       }
    }

-        
-   if (!(dev->state & ST_OPENED)) {
-      if (!first_open_device(dev)) {
-         Pmsg1(0, "Device open failed. ERR=%s\n", strerror_dev(dev));
+
+   if (!dev->is_open()) {
+      if (!first_open_device(dcr)) {
+         Pmsg1(0, _("Device open failed. ERR=%s\n"), dev->bstrerror());

       }
    }
       }
    }

-   rewind_dev(dev);
-   write_new_volume_label_to_dev(dcr, cmd, "Default");
-   Pmsg1(-1, "Wrote Volume label for volume \"%s\".\n", cmd);
+   dev->rewind(dcr);
+   dev->weof(1);
+   write_new_volume_label_to_dev(dcr, cmd, "Default", false,/*no relabel*/ true /* label dvd now */);
+   Pmsg1(-1, _("Wrote Volume label for volume \"%s\".\n"), cmd);

 }
 
 /*
 }
 
 /*

- * Read the tape label  
+ * Read the tape label

  */
 static void readlabelcmd()
 {
  */
 static void readlabelcmd()
 {


@@ -378,33 +429,33 @@ static void readlabelcmd()
    stat = read_dev_volume_label(dcr);
    switch (stat) {
    case VOL_NO_LABEL:
    stat = read_dev_volume_label(dcr);
    switch (stat) {
    case VOL_NO_LABEL:

-      Pmsg0(0, "Volume has no label.\n");
+      Pmsg0(0, _("Volume has no label.\n"));

       break;
    case VOL_OK:
       break;
    case VOL_OK:

-      Pmsg0(0, "Volume label read correctly.\n");
+      Pmsg0(0, _("Volume label read correctly.\n"));

       break;
    case VOL_IO_ERROR:
       break;
    case VOL_IO_ERROR:

-      Pmsg1(0, "I/O error on device: ERR=%s", strerror_dev(dev));
+      Pmsg1(0, _("I/O error on device: ERR=%s"), dev->bstrerror());

       break;
    case VOL_NAME_ERROR:
       break;
    case VOL_NAME_ERROR:

-      Pmsg0(0, "Volume name error\n");
+      Pmsg0(0, _("Volume name error\n"));

       break;
    case VOL_CREATE_ERROR:
       break;
    case VOL_CREATE_ERROR:

-      Pmsg1(0, "Error creating label. ERR=%s", strerror_dev(dev));
+      Pmsg1(0, _("Error creating label. ERR=%s"), dev->bstrerror());

       break;
    case VOL_VERSION_ERROR:
       break;
    case VOL_VERSION_ERROR:

-      Pmsg0(0, "Volume version error.\n");
+      Pmsg0(0, _("Volume version error.\n"));

       break;
    case VOL_LABEL_ERROR:
       break;
    case VOL_LABEL_ERROR:

-      Pmsg0(0, "Bad Volume label type.\n");
+      Pmsg0(0, _("Bad Volume label type.\n"));

       break;
    default:
       break;
    default:

-      Pmsg0(0, "Unknown error.\n");
+      Pmsg0(0, _("Unknown error.\n"));

       break;
    }
 
    debug_level = 20;
       break;
    }
 
    debug_level = 20;

-   dump_volume_label(dev); 
+   dump_volume_label(dev);

    debug_level = save_debug_level;
 }
 
    debug_level = save_debug_level;
 }
 


@@ -417,38 +468,37 @@ static void loadcmd()
 {
 
    if (!load_dev(dev)) {
 {
 
    if (!load_dev(dev)) {

-      Pmsg1(0, "Bad status from load. ERR=%s\n", strerror_dev(dev));
+      Pmsg1(0, _("Bad status from load. ERR=%s\n"), dev->bstrerror());

    } else
    } else

-      Pmsg1(0, "Loaded %s\n", dev_name(dev));
+      Pmsg1(0, _("Loaded %s\n"), dev->print_name());

 }
 
 /*
 }
 
 /*

- * Rewind the tape.   
+ * Rewind the tape.

  */
 static void rewindcmd()
 {
  */
 static void rewindcmd()
 {

-   if (!rewind_dev(dev)) {
-      Pmsg1(0, "Bad status from rewind. ERR=%s\n", strerror_dev(dev));
-      clrerror_dev(dev, -1);
+   if (!dev->rewind(dcr)) {
+      Pmsg1(0, _("Bad status from rewind. ERR=%s\n"), dev->bstrerror());
+      dev->clrerror(-1);

    } else {
    } else {

-      Pmsg1(0, "Rewound %s\n", dev_name(dev));
+      Pmsg1(0, _("Rewound %s\n"), dev->print_name());

    }
 }
 
 /*
    }
 }
 
 /*

- * Clear any tape error   
+ * Clear any tape error

  */
 static void clearcmd()
 {
  */
 static void clearcmd()
 {

-   clrerror_dev(dev, -1);
+   dev->clrerror(-1);

 }
 
 /*
 }
 
 /*

- * Write and end of file on the tape   
+ * Write and end of file on the tape

  */
 static void weofcmd()
 {
  */
 static void weofcmd()
 {

-   int stat;

    int num = 1;
    if (argc > 1) {
       num = atoi(argk[1]);
    int num = 1;
    if (argc > 1) {
       num = atoi(argk[1]);


@@ -457,16 +507,21 @@ static void weofcmd()
       num = 1;
    }
 
       num = 1;
    }
 

-   if ((stat = weof_dev(dev, num)) < 0) {
-      Pmsg2(0, "Bad status from weof %d. ERR=%s\n", stat, strerror_dev(dev));
+   if (!dev->weof(num)) {
+      Pmsg1(0, _("Bad status from weof. ERR=%s\n"), dev->bstrerror());

       return;
    } else {
       return;
    } else {

-      Pmsg3(0, "Wrote %d EOF%s to %s\n", num, num==1?"":"s", dev_name(dev));
+      if (num==1) {
+         Pmsg1(0, _("Wrote 1 EOF to %s\n"), dev->print_name());
+      }
+      else {
+         Pmsg2(0, _("Wrote %d EOFs to %s\n"), num, dev->print_name());
+      }

    }
 }
 
 
    }
 }
 
 

-/* Go to the end of the medium -- raw command  
+/* Go to the end of the medium -- raw command

  * The idea was orginally that the end of the Bacula
  * medium would be flagged differently. This is not
  * currently the case. So, this is identical to the
  * The idea was orginally that the end of the Bacula
  * medium would be flagged differently. This is not
  * currently the case. So, this is identical to the


@@ -474,8 +529,8 @@ static void weofcmd()
  */
 static void eomcmd()
 {
  */
 static void eomcmd()
 {

-   if (!eod_dev(dev)) {
-      Pmsg1(0, "%s", strerror_dev(dev));
+   if (!dev->eod(dcr)) {
+      Pmsg1(0, "%s", dev->bstrerror());

       return;
    } else {
       Pmsg0(0, _("Moved to end of medium.\n"));
       return;
    } else {
       Pmsg0(0, _("Moved to end of medium.\n"));


@@ -492,7 +547,7 @@ static void eodcmd()
 }
 
 /*
 }
 
 /*

- * Backspace file   
+ * Backspace file

  */
 static void bsfcmd()
 {
  */
 static void bsfcmd()
 {


@@ -504,15 +559,15 @@ static void bsfcmd()
       num = 1;
    }
 
       num = 1;
    }
 

-   if (!bsf_dev(dev, num)) {
-      Pmsg1(0, _("Bad status from bsf. ERR=%s\n"), strerror_dev(dev));
+   if (!dev->bsf(num)) {
+      Pmsg1(0, _("Bad status from bsf. ERR=%s\n"), dev->bstrerror());

    } else {
       Pmsg2(0, _("Backspaced %d file%s.\n"), num, num==1?"":"s");
    }
 }
 
 /*
    } else {
       Pmsg2(0, _("Backspaced %d file%s.\n"), num, num==1?"":"s");
    }
 }
 
 /*

- * Backspace record   
+ * Backspace record

  */
 static void bsrcmd()
 {
  */
 static void bsrcmd()
 {


@@ -523,15 +578,15 @@ static void bsrcmd()
    if (num <= 0) {
       num = 1;
    }
    if (num <= 0) {
       num = 1;
    }

-   if (!bsr_dev(dev, num)) {
-      Pmsg1(0, _("Bad status from bsr. ERR=%s\n"), strerror_dev(dev));
+   if (!dev->bsr(num)) {
+      Pmsg1(0, _("Bad status from bsr. ERR=%s\n"), dev->bstrerror());

    } else {
       Pmsg2(0, _("Backspaced %d record%s.\n"), num, num==1?"":"s");
    }
 }
 
 /*
    } else {
       Pmsg2(0, _("Backspaced %d record%s.\n"), num, num==1?"":"s");
    }
 }
 
 /*

- * List device capabilities as defined in the 
+ * List device capabilities as defined in the

  *  stored.conf file.
  */
 static void capcmd()
  *  stored.conf file.
  */
 static void capcmd()


@@ -543,6 +598,7 @@ static void capcmd()
    printf("%sFSR ", dev->capabilities & CAP_FSR ? "" : "!");
    printf("%sFSF ", dev->capabilities & CAP_FSF ? "" : "!");
    printf("%sFASTFSF ", dev->capabilities & CAP_FASTFSF ? "" : "!");
    printf("%sFSR ", dev->capabilities & CAP_FSR ? "" : "!");
    printf("%sFSF ", dev->capabilities & CAP_FSF ? "" : "!");
    printf("%sFASTFSF ", dev->capabilities & CAP_FASTFSF ? "" : "!");

+   printf("%sBSFATEOM ", dev->capabilities & CAP_BSFATEOM ? "" : "!");

    printf("%sEOM ", dev->capabilities & CAP_EOM ? "" : "!");
    printf("%sREM ", dev->capabilities & CAP_REM ? "" : "!");
    printf("%sRACCESS ", dev->capabilities & CAP_RACCESS ? "" : "!");
    printf("%sEOM ", dev->capabilities & CAP_EOM ? "" : "!");
    printf("%sREM ", dev->capabilities & CAP_REM ? "" : "!");
    printf("%sRACCESS ", dev->capabilities & CAP_RACCESS ? "" : "!");


@@ -550,18 +606,19 @@ static void capcmd()
    printf("%sLABEL ", dev->capabilities & CAP_LABEL ? "" : "!");
    printf("%sANONVOLS ", dev->capabilities & CAP_ANONVOLS ? "" : "!");
    printf("%sALWAYSOPEN ", dev->capabilities & CAP_ALWAYSOPEN ? "" : "!");
    printf("%sLABEL ", dev->capabilities & CAP_LABEL ? "" : "!");
    printf("%sANONVOLS ", dev->capabilities & CAP_ANONVOLS ? "" : "!");
    printf("%sALWAYSOPEN ", dev->capabilities & CAP_ALWAYSOPEN ? "" : "!");

+   printf("%sMTIOCGET ", dev->capabilities & CAP_MTIOCGET ? "" : "!");

    printf("\n");
 
    printf(_("Device status:\n"));
    printf("\n");
 
    printf(_("Device status:\n"));

-   printf("%sOPENED ", dev->state & ST_OPENED ? "" : "!");
-   printf("%sTAPE ", dev->state & ST_TAPE ? "" : "!");
-   printf("%sLABEL ", dev->state & ST_LABEL ? "" : "!");
+   printf("%sOPENED ", dev->is_open() ? "" : "!");
+   printf("%sTAPE ", dev->is_tape() ? "" : "!");
+   printf("%sLABEL ", dev->is_labeled() ? "" : "!");

    printf("%sMALLOC ", dev->state & ST_MALLOC ? "" : "!");
    printf("%sMALLOC ", dev->state & ST_MALLOC ? "" : "!");

-   printf("%sAPPEND ", dev->state & ST_APPEND ? "" : "!");
-   printf("%sREAD ", dev->state & ST_READ ? "" : "!");
-   printf("%sEOT ", dev->state & ST_EOT ? "" : "!");
+   printf("%sAPPEND ", dev->can_append() ? "" : "!");
+   printf("%sREAD ", dev->can_read() ? "" : "!");
+   printf("%sEOT ", dev->at_eot() ? "" : "!");

    printf("%sWEOT ", dev->state & ST_WEOT ? "" : "!");
    printf("%sWEOT ", dev->state & ST_WEOT ? "" : "!");

-   printf("%sEOF ", dev->state & ST_EOF ? "" : "!");
+   printf("%sEOF ", dev->at_eof() ? "" : "!");

    printf("%sNEXTVOL ", dev->state & ST_NEXTVOL ? "" : "!");
    printf("%sSHORT ", dev->state & ST_SHORT ? "" : "!");
    printf("\n");
    printf("%sNEXTVOL ", dev->state & ST_NEXTVOL ? "" : "!");
    printf("%sSHORT ", dev->state & ST_SHORT ? "" : "!");
    printf("\n");


@@ -571,13 +628,13 @@ static void capcmd()
    printf("File=%u block=%u\n", dev->file, dev->block_num);
    printf("Min block=%u Max block=%u\n", dev->min_block_size, dev->max_block_size);
 
    printf("File=%u block=%u\n", dev->file, dev->block_num);
    printf("Min block=%u Max block=%u\n", dev->min_block_size, dev->max_block_size);
 

-   printf("Status:\n");
+   printf(_("Status:\n"));

    statcmd();
 
 }
 
 /*
    statcmd();
 
 }
 
 /*

- * Test writting larger and larger records.  
+ * Test writting larger and larger records.

  * This is a torture test for records.
  */
 static void rectestcmd()
  * This is a torture test for records.
  */
 static void rectestcmd()


@@ -586,15 +643,15 @@ static void rectestcmd()
    DEV_RECORD *rec;
    int i, blkno = 0;
 
    DEV_RECORD *rec;
    int i, blkno = 0;
 

-   Pmsg0(0, "Test writting larger and larger records.\n"
+   Pmsg0(0, _("Test writting larger and larger records.\n"

 "This is a torture test for records.\nI am going to write\n"
 "larger and larger records. It will stop when the record size\n"
 "This is a torture test for records.\nI am going to write\n"
 "larger and larger records. It will stop when the record size\n"

-"plus the header exceeds the block size (by default about 64K)\n");
+"plus the header exceeds the block size (by default about 64K)\n"));

 
 
 
 

-   get_cmd("Do you want to continue? (y/n): ");
+   get_cmd(_("Do you want to continue? (y/n): "));

    if (cmd[0] != 'y') {
    if (cmd[0] != 'y') {

-      Pmsg0(000, "Command aborted.\n");
+      Pmsg0(000, _("Command aborted.\n"));

       return;
    }
 
       return;
    }
 


@@ -608,11 +665,11 @@ static void rectestcmd()
       rec->data_len = i;
       sm_check(__FILE__, __LINE__, false);
       if (write_record_to_block(block, rec)) {
       rec->data_len = i;
       sm_check(__FILE__, __LINE__, false);
       if (write_record_to_block(block, rec)) {

-        empty_block(block);
-        blkno++;
-         Pmsg2(0, "Block %d i=%d\n", blkno, i);
+         empty_block(block);
+         blkno++;
+         Pmsg2(0, _("Block %d i=%d\n"), blkno, i);

       } else {
       } else {

-        break;
+         break;

       }
       sm_check(__FILE__, __LINE__, false);
    }
       }
       sm_check(__FILE__, __LINE__, false);
    }


@@ -642,10 +699,10 @@ static int re_read_block_test()
 
    Pmsg0(-1, _("\n=== Write, backup, and re-read test ===\n\n"
       "I'm going to write three records and an EOF\n"
 
    Pmsg0(-1, _("\n=== Write, backup, and re-read test ===\n\n"
       "I'm going to write three records and an EOF\n"

-      "then backup over the EOF and re-read the last record.\n"     
+      "then backup over the EOF and re-read the last record.\n"

       "Bacula does this after writing the last block on the\n"
       "tape to verify that the block was written correctly.\n\n"
       "Bacula does this after writing the last block on the\n"
       "tape to verify that the block was written correctly.\n\n"

-      "This is not an *essential* feature ...\n\n")); 
+      "This is not an *essential* feature ...\n\n"));

    rewindcmd();
    empty_block(block);
    rec = new_record();
    rewindcmd();
    empty_block(block);
    rec = new_record();


@@ -653,70 +710,72 @@ static int re_read_block_test()
    len = rec->data_len = block->buf_len-100;
    memset(rec->data, 1, rec->data_len);
    if (!write_record_to_block(block, rec)) {
    len = rec->data_len = block->buf_len-100;
    memset(rec->data, 1, rec->data_len);
    if (!write_record_to_block(block, rec)) {

-      Pmsg0(0, _("Error writing record to block.\n")); 
+      Pmsg0(0, _("Error writing record to block.\n"));

       goto bail_out;
    }
    if (!write_block_to_dev(dcr)) {
       goto bail_out;
    }
    if (!write_block_to_dev(dcr)) {

-      Pmsg0(0, _("Error writing block to device.\n")); 
+      Pmsg0(0, _("Error writing block to device.\n"));

       goto bail_out;
    } else {
       Pmsg1(0, _("Wrote first record of %d bytes.\n"), rec->data_len);
    }
    memset(rec->data, 2, rec->data_len);
    if (!write_record_to_block(block, rec)) {
       goto bail_out;
    } else {
       Pmsg1(0, _("Wrote first record of %d bytes.\n"), rec->data_len);
    }
    memset(rec->data, 2, rec->data_len);
    if (!write_record_to_block(block, rec)) {

-      Pmsg0(0, _("Error writing record to block.\n")); 
+      Pmsg0(0, _("Error writing record to block.\n"));

       goto bail_out;
    }
    if (!write_block_to_dev(dcr)) {
       goto bail_out;
    }
    if (!write_block_to_dev(dcr)) {

-      Pmsg0(0, _("Error writing block to device.\n")); 
+      Pmsg0(0, _("Error writing block to device.\n"));

       goto bail_out;
    } else {
       Pmsg1(0, _("Wrote second record of %d bytes.\n"), rec->data_len);
    }
    memset(rec->data, 3, rec->data_len);
    if (!write_record_to_block(block, rec)) {
       goto bail_out;
    } else {
       Pmsg1(0, _("Wrote second record of %d bytes.\n"), rec->data_len);
    }
    memset(rec->data, 3, rec->data_len);
    if (!write_record_to_block(block, rec)) {

-      Pmsg0(0, _("Error writing record to block.\n")); 
+      Pmsg0(0, _("Error writing record to block.\n"));

       goto bail_out;
    }
    if (!write_block_to_dev(dcr)) {
       goto bail_out;
    }
    if (!write_block_to_dev(dcr)) {

-      Pmsg0(0, _("Error writing block to device.\n")); 
+      Pmsg0(0, _("Error writing block to device.\n"));

       goto bail_out;
    } else {
       Pmsg1(0, _("Wrote third record of %d bytes.\n"), rec->data_len);
    }
    weofcmd();
       goto bail_out;
    } else {
       Pmsg1(0, _("Wrote third record of %d bytes.\n"), rec->data_len);
    }
    weofcmd();

-   if (dev_cap(dev, CAP_TWOEOF)) {
+   if (dev->has_cap(CAP_TWOEOF)) {

       weofcmd();
    }
       weofcmd();
    }

-   if (!bsf_dev(dev, 1)) {
-      Pmsg1(0, _("Backspace file failed! ERR=%s\n"), strerror_dev(dev));
+   if (!dev->bsf(1)) {
+      Pmsg1(0, _("Backspace file failed! ERR=%s\n"), dev->bstrerror());

       goto bail_out;
    }
       goto bail_out;
    }

-   if (dev_cap(dev, CAP_TWOEOF)) {
-      if (!bsf_dev(dev, 1)) {
-         Pmsg1(0, _("Backspace file failed! ERR=%s\n"), strerror_dev(dev));
-        goto bail_out;
+   if (dev->has_cap(CAP_TWOEOF)) {
+      if (!dev->bsf(1)) {
+         Pmsg1(0, _("Backspace file failed! ERR=%s\n"), dev->bstrerror());
+         goto bail_out;

       }
    }
       }
    }

-   Pmsg0(0, "Backspaced over EOF OK.\n");
-   if (!bsr_dev(dev, 1)) {
-      Pmsg1(0, _("Backspace record failed! ERR=%s\n"), strerror_dev(dev));
+   Pmsg0(0, _("Backspaced over EOF OK.\n"));
+   if (!dev->bsr(1)) {
+      Pmsg1(0, _("Backspace record failed! ERR=%s\n"), dev->bstrerror());

       goto bail_out;
    }
       goto bail_out;
    }

-   Pmsg0(0, "Backspace record OK.\n");
+   Pmsg0(0, _("Backspace record OK.\n"));

    if (!read_block_from_dev(dcr, NO_BLOCK_NUMBER_CHECK)) {
    if (!read_block_from_dev(dcr, NO_BLOCK_NUMBER_CHECK)) {

-      Pmsg1(0, _("Read block failed! ERR=%s\n"), strerror(dev->dev_errno));
+      berrno be;
+      Pmsg1(0, _("Read block failed! ERR=%s\n"), be.bstrerror(dev->dev_errno));

       goto bail_out;
    }
    memset(rec->data, 0, rec->data_len);
       goto bail_out;
    }
    memset(rec->data, 0, rec->data_len);

-   if (!read_record_from_block(block, rec)) {
-      Pmsg1(0, _("Read block failed! ERR=%s\n"), strerror(dev->dev_errno));
+   if (!read_record_from_block(dcr, block, rec)) {
+      berrno be;
+      Pmsg1(0, _("Read block failed! ERR=%s\n"), be.bstrerror(dev->dev_errno));

       goto bail_out;
    }
    for (int i=0; i<len; i++) {
       if (rec->data[i] != 3) {
          Pmsg0(0, _("Bad data in record. Test failed!\n"));
       goto bail_out;
    }
    for (int i=0; i<len; i++) {
       if (rec->data[i] != 3) {
          Pmsg0(0, _("Bad data in record. Test failed!\n"));

-        goto bail_out;
+         goto bail_out;

       }
    }
    Pmsg0(0, _("\nBlock re-read correct. Test succeeded!\n"));
       }
    }
    Pmsg0(0, _("\nBlock re-read correct. Test succeeded!\n"));


@@ -733,7 +792,7 @@ bail_out:
                  "if you add:\n\n"
                   "Backward Space Record = No\n\n"
                   "to your Storage daemon's Device resource definition.\n"));
                  "if you add:\n\n"
                   "Backward Space Record = No\n\n"
                   "to your Storage daemon's Device resource definition.\n"));

-   }   
+   }

    return stat;
 }
 
    return stat;
 }
 


@@ -753,13 +812,13 @@ static int write_read_test()
 
    Pmsg0(-1, _("\n=== Write, rewind, and re-read test ===\n\n"
       "I'm going to write 1000 records and an EOF\n"
 
    Pmsg0(-1, _("\n=== Write, rewind, and re-read test ===\n\n"
       "I'm going to write 1000 records and an EOF\n"

-      "then write 1000 records and an EOF, then rewind,\n"     
+      "then write 1000 records and an EOF, then rewind,\n"

       "and re-read the data to verify that it is correct.\n\n"
       "and re-read the data to verify that it is correct.\n\n"

-      "This is an *essential* feature ...\n\n")); 
+      "This is an *essential* feature ...\n\n"));

    block = dcr->block;
    rec = new_record();
    block = dcr->block;
    rec = new_record();

-   if (!rewind_dev(dev)) {
-      Pmsg1(0, "Bad status from rewind. ERR=%s\n", strerror_dev(dev));
+   if (!dev->rewind(dcr)) {
+      Pmsg1(0, _("Bad status from rewind. ERR=%s\n"), dev->bstrerror());

       goto bail_out;
    }
    rec->data = check_pool_memory_size(rec->data, block->buf_len);
       goto bail_out;
    }
    rec->data = check_pool_memory_size(rec->data, block->buf_len);


@@ -768,15 +827,15 @@ static int write_read_test()
    for (i=1; i<=1000; i++) {
       p = (int *)rec->data;
       for (j=0; j<len; j++) {
    for (i=1; i<=1000; i++) {
       p = (int *)rec->data;
       for (j=0; j<len; j++) {

-        *p++ = i;
+         *p++ = i;

       }
       if (!write_record_to_block(block, rec)) {
       }
       if (!write_record_to_block(block, rec)) {

-         Pmsg0(0, _("Error writing record to block.\n")); 
-        goto bail_out;
+         Pmsg0(0, _("Error writing record to block.\n"));
+         goto bail_out;

       }
       if (!write_block_to_dev(dcr)) {
       }
       if (!write_block_to_dev(dcr)) {

-         Pmsg0(0, _("Error writing block to device.\n")); 
-        goto bail_out;
+         Pmsg0(0, _("Error writing block to device.\n"));
+         goto bail_out;

       }
    }
    Pmsg1(0, _("Wrote 1000 blocks of %d bytes.\n"), rec->data_len);
       }
    }
    Pmsg1(0, _("Wrote 1000 blocks of %d bytes.\n"), rec->data_len);


@@ -784,51 +843,55 @@ static int write_read_test()
    for (i=1001; i<=2000; i++) {
       p = (int *)rec->data;
       for (j=0; j<len; j++) {
    for (i=1001; i<=2000; i++) {
       p = (int *)rec->data;
       for (j=0; j<len; j++) {

-        *p++ = i;
+         *p++ = i;

       }
       if (!write_record_to_block(block, rec)) {
       }
       if (!write_record_to_block(block, rec)) {

-         Pmsg0(0, _("Error writing record to block.\n")); 
-        goto bail_out;
+         Pmsg0(0, _("Error writing record to block.\n"));
+         goto bail_out;

       }
       if (!write_block_to_dev(dcr)) {
       }
       if (!write_block_to_dev(dcr)) {

-         Pmsg0(0, _("Error writing block to device.\n")); 
-        goto bail_out;
+         Pmsg0(0, _("Error writing block to device.\n"));
+         goto bail_out;

       }
    }
    Pmsg1(0, _("Wrote 1000 blocks of %d bytes.\n"), rec->data_len);
    weofcmd();
       }
    }
    Pmsg1(0, _("Wrote 1000 blocks of %d bytes.\n"), rec->data_len);
    weofcmd();

-   if (dev_cap(dev, CAP_TWOEOF)) {
+   if (dev->has_cap(CAP_TWOEOF)) {

       weofcmd();
    }
       weofcmd();
    }

-   if (!rewind_dev(dev)) {
-      Pmsg1(0, "Bad status from rewind. ERR=%s\n", strerror_dev(dev));
+   if (!dev->rewind(dcr)) {
+      Pmsg1(0, _("Bad status from rewind. ERR=%s\n"), dev->bstrerror());

       goto bail_out;
    } else {
       goto bail_out;
    } else {

-      Pmsg0(0, "Rewind OK.\n");
+      Pmsg0(0, _("Rewind OK.\n"));

    }
    for (i=1; i<=2000; i++) {
 read_again:
       if (!read_block_from_dev(dcr, NO_BLOCK_NUMBER_CHECK)) {
    }
    for (i=1; i<=2000; i++) {
 read_again:
       if (!read_block_from_dev(dcr, NO_BLOCK_NUMBER_CHECK)) {

-        if (dev_state(dev, ST_EOF)) {
+         berrno be;
+         if (dev_state(dev, ST_EOF)) {

             Pmsg0(-1, _("Got EOF on tape.\n"));
             Pmsg0(-1, _("Got EOF on tape.\n"));

-           goto read_again;
-        }
-         Pmsg1(0, _("Read block failed! ERR=%s\n"), strerror(dev->dev_errno));
-        goto bail_out;
+            if (i == 1001) {
+               goto read_again;
+            }
+         }
+         Pmsg2(0, _("Read block %d failed! ERR=%s\n"), i, be.bstrerror(dev->dev_errno));
+         goto bail_out;

       }
       memset(rec->data, 0, rec->data_len);
       }
       memset(rec->data, 0, rec->data_len);

-      if (!read_record_from_block(block, rec)) {
-         Pmsg1(0, _("Read record failed! ERR=%s\n"), strerror(dev->dev_errno));
-        goto bail_out;
+      if (!read_record_from_block(dcr, block, rec)) {
+         berrno be;
+         Pmsg2(0, _("Read record failed. Block %d! ERR=%s\n"), i, be.bstrerror(dev->dev_errno));
+         goto bail_out;

       }
       p = (int *)rec->data;
       for (j=0; j<len; j++) {
       }
       p = (int *)rec->data;
       for (j=0; j<len; j++) {

-        if (*p != i) {
+         if (*p != i) {

             Pmsg3(0, _("Bad data in record. Expected %d, got %d at byte %d. Test failed!\n"),
             Pmsg3(0, _("Bad data in record. Expected %d, got %d at byte %d. Test failed!\n"),

-              i, *p, j);
-           goto bail_out;
-        }
-        p++;
+               i, *p, j);
+            goto bail_out;
+         }
+         p++;

       }
       if (i == 1000 || i == 2000) {
          Pmsg0(-1, _("1000 blocks re-read correctly.\n"));
       }
       if (i == 1000 || i == 2000) {
          Pmsg0(-1, _("1000 blocks re-read correctly.\n"));


@@ -857,16 +920,17 @@ static int position_test()
    int recno = 0;
    int file = 0, blk = 0;
    int *p;
    int recno = 0;
    int file = 0, blk = 0;
    int *p;

+   bool got_eof = false;

 
    Pmsg0(-1, _("\n=== Write, rewind, and position test ===\n\n"
       "I'm going to write 1000 records and an EOF\n"
 
    Pmsg0(-1, _("\n=== Write, rewind, and position test ===\n\n"
       "I'm going to write 1000 records and an EOF\n"

-      "then write 1000 records and an EOF, then rewind,\n"     
+      "then write 1000 records and an EOF, then rewind,\n"

       "and position to a few blocks and verify that it is correct.\n\n"
       "and position to a few blocks and verify that it is correct.\n\n"

-      "This is an *essential* feature ...\n\n")); 
+      "This is an *essential* feature ...\n\n"));

    empty_block(block);
    rec = new_record();
    empty_block(block);
    rec = new_record();

-   if (!rewind_dev(dev)) {
-      Pmsg1(0, "Bad status from rewind. ERR=%s\n", strerror_dev(dev));
+   if (!dev->rewind(dcr)) {
+      Pmsg1(0, _("Bad status from rewind. ERR=%s\n"), dev->bstrerror());

       goto bail_out;
    }
    rec->data = check_pool_memory_size(rec->data, block->buf_len);
       goto bail_out;
    }
    rec->data = check_pool_memory_size(rec->data, block->buf_len);


@@ -875,15 +939,15 @@ static int position_test()
    for (i=1; i<=1000; i++) {
       p = (int *)rec->data;
       for (j=0; j<len; j++) {
    for (i=1; i<=1000; i++) {
       p = (int *)rec->data;
       for (j=0; j<len; j++) {

-        *p++ = i;
+         *p++ = i;

       }
       if (!write_record_to_block(block, rec)) {
       }
       if (!write_record_to_block(block, rec)) {

-         Pmsg0(0, _("Error writing record to block.\n")); 
-        goto bail_out;
+         Pmsg0(0, _("Error writing record to block.\n"));
+         goto bail_out;

       }
       if (!write_block_to_dev(dcr)) {
       }
       if (!write_block_to_dev(dcr)) {

-         Pmsg0(0, _("Error writing block to device.\n")); 
-        goto bail_out;
+         Pmsg0(0, _("Error writing block to device.\n"));
+         goto bail_out;

       }
    }
    Pmsg1(0, _("Wrote 1000 blocks of %d bytes.\n"), rec->data_len);
       }
    }
    Pmsg1(0, _("Wrote 1000 blocks of %d bytes.\n"), rec->data_len);


@@ -891,98 +955,111 @@ static int position_test()
    for (i=1001; i<=2000; i++) {
       p = (int *)rec->data;
       for (j=0; j<len; j++) {
    for (i=1001; i<=2000; i++) {
       p = (int *)rec->data;
       for (j=0; j<len; j++) {

-        *p++ = i;
+         *p++ = i;

       }
       if (!write_record_to_block(block, rec)) {
       }
       if (!write_record_to_block(block, rec)) {

-         Pmsg0(0, _("Error writing record to block.\n")); 
-        goto bail_out;
+         Pmsg0(0, _("Error writing record to block.\n"));
+         goto bail_out;

       }
       if (!write_block_to_dev(dcr)) {
       }
       if (!write_block_to_dev(dcr)) {

-         Pmsg0(0, _("Error writing block to device.\n")); 
-        goto bail_out;
+         Pmsg0(0, _("Error writing block to device.\n"));
+         goto bail_out;

       }
    }
    Pmsg1(0, _("Wrote 1000 blocks of %d bytes.\n"), rec->data_len);
    weofcmd();
       }
    }
    Pmsg1(0, _("Wrote 1000 blocks of %d bytes.\n"), rec->data_len);
    weofcmd();

-   if (dev_cap(dev, CAP_TWOEOF)) {
+   if (dev->has_cap(CAP_TWOEOF)) {

       weofcmd();
    }
       weofcmd();
    }

-   if (!rewind_dev(dev)) {
-      Pmsg1(0, "Bad status from rewind. ERR=%s\n", strerror_dev(dev));
+   if (!dev->rewind(dcr)) {
+      Pmsg1(0, _("Bad status from rewind. ERR=%s\n"), dev->bstrerror());

       goto bail_out;
    } else {
       goto bail_out;
    } else {

-      Pmsg0(0, "Rewind OK.\n");
+      Pmsg0(0, _("Rewind OK.\n"));

    }
 
    while(ok) {
       /* Set up next item to read based on where we are */
       switch (recno) {
       case 0:
    }
 
    while(ok) {
       /* Set up next item to read based on where we are */
       switch (recno) {
       case 0:

-        recno = 5;
-        file = 0;
-        blk = 4;
-        break;
+         recno = 5;
+         file = 0;
+         blk = 4;
+         break;

       case 5:
       case 5:

-        recno = 201;
-        file = 0;
-        blk = 200;
-        break;
+         recno = 201;
+         file = 0;
+         blk = 200;
+         break;

       case 201:
       case 201:

-        recno = 1000;
-        file = 0;
-        blk = 999;
-        break;
+         recno = 1000;
+         file = 0;
+         blk = 999;
+         break;

       case 1000:
       case 1000:

-        recno = 1001;
-        file = 1;
-        blk = 0;
-        break;
+         recno = 1001;
+         file = 1;
+         blk = 0;
+         break;

       case 1001:
       case 1001:

-        recno = 1601;
-        file = 1;
-        blk = 600;
-        break;
+         recno = 1601;
+         file = 1;
+         blk = 600;
+         break;

       case 1601:
       case 1601:

-        recno = 2000;
-        file = 1;
-        blk = 999;
-        break;
+         recno = 2000;
+         file = 1;
+         blk = 999;
+         break;

       case 2000:
       case 2000:

-        ok = false;
-        continue;
+         ok = false;
+         continue;

       }
       }

-      Pmsg2(-1, "Reposition to file:block %d:%d\n", file, blk);
-      if (!reposition_dev(dev, file, blk)) {
-         Pmsg0(0, "Reposition error.\n");
-        goto bail_out;
+      Pmsg2(-1, _("Reposition to file:block %d:%d\n"), file, blk);
+      if (!dev->reposition(dcr, file, blk)) {
+         Pmsg0(0, _("Reposition error.\n"));
+         goto bail_out;

       }
 read_again:
       if (!read_block_from_dev(dcr, NO_BLOCK_NUMBER_CHECK)) {
       }
 read_again:
       if (!read_block_from_dev(dcr, NO_BLOCK_NUMBER_CHECK)) {

-        if (dev_state(dev, ST_EOF)) {
+         berrno be;
+         if (dev_state(dev, ST_EOF)) {

             Pmsg0(-1, _("Got EOF on tape.\n"));
             Pmsg0(-1, _("Got EOF on tape.\n"));

-           goto read_again;
-        }
-         Pmsg1(0, _("Read block failed! ERR=%s\n\n"), strerror(dev->dev_errno));
+            if (!got_eof) {
+               got_eof = true;
+               goto read_again;
+            }
+         }
+         Pmsg4(0, _("Read block %d failed! file=%d blk=%d. ERR=%s\n\n"),
+            recno, file, blk, be.bstrerror(dev->dev_errno));

          Pmsg0(0, _("This may be because the tape drive block size is not\n"
                     " set to variable blocking as normally used by Bacula.\n"
                     " Please see the Tape Testing chapter in the manual and \n"
          Pmsg0(0, _("This may be because the tape drive block size is not\n"
                     " set to variable blocking as normally used by Bacula.\n"
                     " Please see the Tape Testing chapter in the manual and \n"

-                    " look for using mt with defblksize and setoptions\n"));
-        goto bail_out;
+                    " look for using mt with defblksize and setoptions\n"
+                    "If your tape drive block size is correct, then perhaps\n"
+                    " your SCSI driver is *really* stupid and does not\n"
+                    " correctly report the file:block after a FSF. In this\n"
+                    " case try setting:\n"
+                    "    Fast Forward Space File = no\n"
+                    " in your Device resource.\n"));
+
+         goto bail_out;

       }
       memset(rec->data, 0, rec->data_len);
       }
       memset(rec->data, 0, rec->data_len);

-      if (!read_record_from_block(block, rec)) {
-         Pmsg1(0, _("Read record failed! ERR=%s\n"), strerror(dev->dev_errno));
-        goto bail_out;
+      if (!read_record_from_block(dcr, block, rec)) {
+         berrno be;
+         Pmsg1(0, _("Read record failed! ERR=%s\n"), be.bstrerror(dev->dev_errno));
+         goto bail_out;

       }
       p = (int *)rec->data;
       for (j=0; j<len; j++) {
       }
       p = (int *)rec->data;
       for (j=0; j<len; j++) {

-        if (p[j] != recno) {
+         if (p[j] != recno) {

             Pmsg3(0, _("Bad data in record. Expected %d, got %d at byte %d. Test failed!\n"),
             Pmsg3(0, _("Bad data in record. Expected %d, got %d at byte %d. Test failed!\n"),

-              recno, p[j], j);
-           goto bail_out;
-        }
+               recno, p[j], j);
+            goto bail_out;
+         }

       }
       }

-      Pmsg0(-1, _("Block re-read correctly.\n"));
+      Pmsg1(-1, _("Block %d re-read correctly.\n"), recno);

    }
    Pmsg0(-1, _("=== Test Succeeded. End Write, rewind, and re-read test ===\n\n"));
    stat = 1;
    }
    Pmsg0(-1, _("=== Test Succeeded. End Write, rewind, and re-read test ===\n\n"));
    stat = 1;


@@ -1011,44 +1088,44 @@ static int append_test()
    argc = 1;
    rewindcmd();
    wrcmd();
    argc = 1;
    rewindcmd();
    wrcmd();

-   weofcmd();     /* end file 0 */
+   weofcmd();      /* end file 0 */

    wrcmd();
    wrcmd();
    wrcmd();
    wrcmd();

-   weofcmd();     /* end file 1 */
+   weofcmd();      /* end file 1 */

    wrcmd();
    wrcmd();
    wrcmd();
    wrcmd();
    wrcmd();
    wrcmd();

-   weofcmd();    /* end file 2 */
-   if (dev_cap(dev, CAP_TWOEOF)) {
+   weofcmd();     /* end file 2 */
+   if (dev->has_cap(CAP_TWOEOF)) {

       weofcmd();
    }
       weofcmd();
    }

-   force_close_dev(dev);             /* release device */
+   dev->close();              /* release device */

    if (!open_the_device()) {
       return -1;
    }
    rewindcmd();
    Pmsg0(0, _("Now moving to end of medium.\n"));
    eodcmd();
    if (!open_the_device()) {
       return -1;
    }
    rewindcmd();
    Pmsg0(0, _("Now moving to end of medium.\n"));
    eodcmd();

-   Pmsg2(-1, _("We should be in file 3. I am at file %d. This is %s\n"), 
-      dev->file, dev->file == 3 ? "correct!" : "NOT correct!!!!");
+   Pmsg2(-1, _("We should be in file 3. I am at file %d. %s\n"),
+      dev->file, dev->file == 3 ? _("This is correct!") : _("This is NOT correct!!!!"));

 
    if (dev->file != 3) {
       return -1;
    }
 
    Pmsg0(-1, _("\nNow the important part, I am going to attempt to append to the tape.\n\n"));
 
    if (dev->file != 3) {
       return -1;
    }
 
    Pmsg0(-1, _("\nNow the important part, I am going to attempt to append to the tape.\n\n"));

-   wrcmd(); 
+   wrcmd();

    weofcmd();
    weofcmd();

-   if (dev_cap(dev, CAP_TWOEOF)) {
+   if (dev->has_cap(CAP_TWOEOF)) {

       weofcmd();
    }
    rewindcmd();
    Pmsg0(-1, _("Done appending, there should be no I/O errors\n\n"));
       weofcmd();
    }
    rewindcmd();
    Pmsg0(-1, _("Done appending, there should be no I/O errors\n\n"));

-   Pmsg0(-1, "Doing Bacula scan of blocks:\n");
+   Pmsg0(-1, _("Doing Bacula scan of blocks:\n"));

    scan_blocks();
    Pmsg0(-1, _("End scanning the tape.\n"));
    scan_blocks();
    Pmsg0(-1, _("End scanning the tape.\n"));

-   Pmsg2(-1, _("We should be in file 4. I am at file %d. This is %s\n"), 
-      dev->file, dev->file == 4 ? "correct!" : "NOT correct!!!!");
+   Pmsg2(-1, _("We should be in file 4. I am at file %d. %s\n"),
+      dev->file, dev->file == 4 ? _("This is correct!") : _("This is NOT correct!!!!"));

 
    if (dev->file != 4) {
       return -2;
 
    if (dev->file != 4) {
       return -2;


@@ -1064,22 +1141,22 @@ static int autochanger_test()
 {
    POOLMEM *results, *changer;
    int slot, status, loaded;
 {
    POOLMEM *results, *changer;
    int slot, status, loaded;

-   int timeout = jcr->device->max_changer_wait;
+   int timeout = dcr->device->max_changer_wait;

    int sleep_time = 0;
 
    Dmsg1(100, "Max changer wait = %d sec\n", timeout);
    int sleep_time = 0;
 
    Dmsg1(100, "Max changer wait = %d sec\n", timeout);

-   if (!dev_cap(dev, CAP_AUTOCHANGER)) {
+   if (!dev->has_cap(CAP_AUTOCHANGER)) {

       return 1;
    }
       return 1;
    }

-   if (!(jcr->device && jcr->device->changer_name && jcr->device->changer_command)) {
-      Pmsg0(-1, "\nAutochanger enabled, but no name or no command device specified.\n");
+   if (!(dcr->device && dcr->device->changer_name && dcr->device->changer_command)) {
+      Pmsg0(-1, _("\nAutochanger enabled, but no name or no command device specified.\n"));

       return 1;
    }
 
       return 1;
    }
 

-   Pmsg0(-1, "\nAh, I see you have an autochanger configured.\n"
+   Pmsg0(-1, _("\nAh, I see you have an autochanger configured.\n"

              "To test the autochanger you must have a blank tape\n"
              "To test the autochanger you must have a blank tape\n"

-             " that I can write on in Slot 1.\n");
-   if (!get_cmd("\nDo you wish to continue with the Autochanger test? (y/n): ")) {
+             " that I can write on in Slot 1.\n"));
+   if (!get_cmd(_("\nDo you wish to continue with the Autochanger test? (y/n): "))) {

       return 0;
    }
    if (cmd[0] != 'y' && cmd[0] != 'Y') {
       return 0;
    }
    if (cmd[0] != 'y' && cmd[0] != 'Y') {


@@ -1096,101 +1173,98 @@ try_again:
    dcr->VolCatInfo.Slot = slot;
    /* Find out what is loaded, zero means device is unloaded */
    Pmsg0(-1, _("3301 Issuing autochanger \"loaded\" command.\n"));
    dcr->VolCatInfo.Slot = slot;
    /* Find out what is loaded, zero means device is unloaded */
    Pmsg0(-1, _("3301 Issuing autochanger \"loaded\" command.\n"));

-   changer = edit_device_codes(jcr, changer, jcr->device->changer_command, 
-                "loaded");
+   changer = edit_device_codes(dcr, changer, 
+                dcr->device->changer_command, "loaded");

    status = run_program(changer, timeout, results);
    Dmsg3(100, "run_prog: %s stat=%d result=\"%s\"\n", changer, status, results);
    if (status == 0) {
       loaded = atoi(results);
    } else {
       berrno be;
    status = run_program(changer, timeout, results);
    Dmsg3(100, "run_prog: %s stat=%d result=\"%s\"\n", changer, status, results);
    if (status == 0) {
       loaded = atoi(results);
    } else {
       berrno be;

-      be.set_errno(status);

       Pmsg1(-1, _("3991 Bad autochanger command: %s\n"), changer);
       Pmsg1(-1, _("3991 Bad autochanger command: %s\n"), changer);

-      Pmsg2(-1, _("3991 result=\"%s\": ERR=%s\n"), results, be.strerror());
+      Pmsg2(-1, _("3991 result=\"%s\": ERR=%s\n"), results, be.bstrerror(status));

       goto bail_out;
    }
    if (loaded) {
       goto bail_out;
    }
    if (loaded) {

-      Pmsg1(-1, "Slot %d loaded. I am going to unload it.\n", loaded);
+      Pmsg1(-1, _("Slot %d loaded. I am going to unload it.\n"), loaded);

    } else {
    } else {

-      Pmsg0(-1, "Nothing loaded in the drive. OK.\n");
+      Pmsg0(-1, _("Nothing loaded in the drive. OK.\n"));

    }
    Dmsg1(100, "Results from loaded query=%s\n", results);
    if (loaded) {
       dcr->VolCatInfo.Slot = loaded;
    }
    Dmsg1(100, "Results from loaded query=%s\n", results);
    if (loaded) {
       dcr->VolCatInfo.Slot = loaded;

-      offline_or_rewind_dev(dev);

       /* We are going to load a new tape, so close the device */
       /* We are going to load a new tape, so close the device */

-      force_close_dev(dev);
+      dev->close();

       Pmsg2(-1, _("3302 Issuing autochanger \"unload %d %d\" command.\n"),
       Pmsg2(-1, _("3302 Issuing autochanger \"unload %d %d\" command.\n"),

-        loaded, dev->drive_index);
-      changer = edit_device_codes(jcr, changer, 
-                     jcr->device->changer_command, "unload");
+         loaded, dev->drive_index);
+      changer = edit_device_codes(dcr, changer, 
+                   dcr->device->changer_command, "unload");

       status = run_program(changer, timeout, results);
       status = run_program(changer, timeout, results);

-      Pmsg2(-1, "unload status=%s %d\n", status==0?"OK":"Bad", status);
+      Pmsg2(-1, _("unload status=%s %d\n"), status==0?_("OK"):_("Bad"), status);

       if (status != 0) {
       if (status != 0) {

-        berrno be;
-        be.set_errno(status);
+         berrno be;

          Pmsg1(-1, _("3992 Bad autochanger command: %s\n"), changer);
          Pmsg1(-1, _("3992 Bad autochanger command: %s\n"), changer);

-         Pmsg2(-1, _("3992 result=\"%s\": ERR=%s\n"), results, be.strerror());
+         Pmsg2(-1, _("3992 result=\"%s\": ERR=%s\n"), results, be.bstrerror(status));

       }
    }
 
    /*
     * Load the Slot 1
     */
       }
    }
 
    /*
     * Load the Slot 1
     */

-   
+

    slot = 1;
    dcr->VolCatInfo.Slot = slot;
    slot = 1;
    dcr->VolCatInfo.Slot = slot;

-   Pmsg2(-1, _("3303 Issuing autochanger \"load slot %d %d\" command.\n"), 
+   Pmsg2(-1, _("3303 Issuing autochanger \"load %d %d\" command.\n"),

       slot, dev->drive_index);
       slot, dev->drive_index);

-   changer = edit_device_codes(jcr, changer, jcr->device->changer_command, "load");
+   changer = edit_device_codes(dcr, changer, 
+                dcr->device->changer_command, "load");

    Dmsg1(100, "Changer=%s\n", changer);
    Dmsg1(100, "Changer=%s\n", changer);

-   force_close_dev(dev);
+   dev->close();

    status = run_program(changer, timeout, results);
    if (status == 0) {
    status = run_program(changer, timeout, results);
    if (status == 0) {

-      Pmsg2(-1,  _("3303 Autochanger \"load slot %d %d\" status is OK.\n"),
-        slot, dev->drive_index);
+      Pmsg2(-1,  _("3303 Autochanger \"load %d %d\" status is OK.\n"),
+         slot, dev->drive_index);

    } else {
       berrno be;
    } else {
       berrno be;

-      be.set_errno(status);

       Pmsg1(-1, _("3993 Bad autochanger command: %s\n"), changer);
       Pmsg1(-1, _("3993 Bad autochanger command: %s\n"), changer);

-      Pmsg2(-1, _("3993 result=\"%s\": ERR=%s\n"), results, be.strerror());
+      Pmsg2(-1, _("3993 result=\"%s\": ERR=%s\n"), results, be.bstrerror(status));

       goto bail_out;
    }
 
    if (!open_the_device()) {
       goto bail_out;
    }
       goto bail_out;
    }
 
    if (!open_the_device()) {
       goto bail_out;
    }

-   /*  
+   /*

     * Start with sleep_time 0 then increment by 30 seconds if we get
     * a failure.
     */
    bmicrosleep(sleep_time, 0);
     * Start with sleep_time 0 then increment by 30 seconds if we get
     * a failure.
     */
    bmicrosleep(sleep_time, 0);

-   if (!rewind_dev(dev) || weof_dev(dev,1) < 0) {
-      Pmsg1(0, "Bad status from rewind. ERR=%s\n", strerror_dev(dev));
-      clrerror_dev(dev, -1);
-      Pmsg0(-1, "\nThe test failed, probably because you need to put\n"
-                "a longer sleep time in the mtx-script in the load) case.\n" 
-                "Adding a 30 second sleep and trying again ...\n");
+   if (!dev->rewind(dcr) || !dev->weof(1)) {
+      Pmsg1(0, _("Bad status from rewind. ERR=%s\n"), dev->bstrerror());
+      dev->clrerror(-1);
+      Pmsg0(-1, _("\nThe test failed, probably because you need to put\n"
+                "a longer sleep time in the mtx-script in the load) case.\n"
+                "Adding a 30 second sleep and trying again ...\n"));

       sleep_time += 30;
       goto try_again;
    } else {
       sleep_time += 30;
       goto try_again;
    } else {

-      Pmsg1(0, "Rewound %s\n", dev_name(dev));
+      Pmsg1(0, _("Rewound %s\n"), dev->print_name());

    }
    }

-      
-   if ((status = weof_dev(dev, 1)) < 0) {
-      Pmsg2(0, "Bad status from weof %d. ERR=%s\n", status, strerror_dev(dev));
+
+   if (!dev->weof(1)) {
+      Pmsg1(0, _("Bad status from weof. ERR=%s\n"), dev->bstrerror());

       goto bail_out;
    } else {
       goto bail_out;
    } else {

-      Pmsg1(0, "Wrote EOF to %s\n", dev_name(dev));
+      Pmsg1(0, _("Wrote EOF to %s\n"), dev->print_name());

    }
 
    if (sleep_time) {
    }
 
    if (sleep_time) {

-      Pmsg1(-1, "\nThe test worked this time. Please add:\n\n"
+      Pmsg1(-1, _("\nThe test worked this time. Please add:\n\n"

                 "   sleep %d\n\n"
                 "   sleep %d\n\n"

-                "to your mtx-changer script in the load) case.\n\n",
-               sleep_time);
+                "to your mtx-changer script in the load) case.\n\n"),
+                sleep_time);

    } else {
    } else {

-      Pmsg0(-1, "\nThe test autochanger worked!!\n\n");
+      Pmsg0(-1, _("\nThe test autochanger worked!!\n\n"));

    }
 
    free_pool_memory(changer);
    }
 
    free_pool_memory(changer);


@@ -1201,7 +1275,7 @@ try_again:
 bail_out:
    free_pool_memory(changer);
    free_pool_memory(results);
 bail_out:
    free_pool_memory(changer);
    free_pool_memory(results);

-   Pmsg0(-1, "You must correct this error or the Autochanger will not work.\n");
+   Pmsg0(-1, _("You must correct this error or the Autochanger will not work.\n"));

    return -2;
 }
 
    return -2;
 }
 


@@ -1218,51 +1292,51 @@ static void autochangercmd()
 static int fsf_test()
 {
    bool set_off = false;
 static int fsf_test()
 {
    bool set_off = false;

-   
+

    Pmsg0(-1, _("\n\n=== Forward space files test ===\n\n"
                "This test is essential to Bacula.\n\n"
                "I'm going to write five files then test forward spacing\n\n"));
    argc = 1;
    rewindcmd();
    wrcmd();
    Pmsg0(-1, _("\n\n=== Forward space files test ===\n\n"
                "This test is essential to Bacula.\n\n"
                "I'm going to write five files then test forward spacing\n\n"));
    argc = 1;
    rewindcmd();
    wrcmd();

-   weofcmd();     /* end file 0 */
+   weofcmd();      /* end file 0 */

    wrcmd();
    wrcmd();
    wrcmd();
    wrcmd();

-   weofcmd();     /* end file 1 */
+   weofcmd();      /* end file 1 */

    wrcmd();
    wrcmd();
    wrcmd();
    wrcmd();
    wrcmd();
    wrcmd();

-   weofcmd();    /* end file 2 */
+   weofcmd();     /* end file 2 */

    wrcmd();
    wrcmd();
    wrcmd();
    wrcmd();

-   weofcmd();    /* end file 3 */
+   weofcmd();     /* end file 3 */

    wrcmd();
    wrcmd();

-   weofcmd();    /* end file 4 */
-   if (dev_cap(dev, CAP_TWOEOF)) {
+   weofcmd();     /* end file 4 */
+   if (dev->has_cap(CAP_TWOEOF)) {

       weofcmd();
    }
 
 test_again:
    rewindcmd();
    Pmsg0(0, _("Now forward spacing 1 file.\n"));
       weofcmd();
    }
 
 test_again:
    rewindcmd();
    Pmsg0(0, _("Now forward spacing 1 file.\n"));

-   if (!fsf_dev(dev, 1)) {
-      Pmsg1(0, "Bad status from fsr. ERR=%s\n", strerror_dev(dev));
+   if (!dev->fsf(1)) {
+      Pmsg1(0, _("Bad status from fsr. ERR=%s\n"), dev->bstrerror());

       goto bail_out;
    }
       goto bail_out;
    }

-   Pmsg2(-1, _("We should be in file 1. I am at file %d. This is %s\n"), 
-      dev->file, dev->file == 1 ? "correct!" : "NOT correct!!!!");
+   Pmsg2(-1, _("We should be in file 1. I am at file %d. %s\n"),
+      dev->file, dev->file == 1 ? _("This is correct!") : _("This is NOT correct!!!!"));

 
    if (dev->file != 1) {
       goto bail_out;
    }
 
    Pmsg0(0, _("Now forward spacing 2 files.\n"));
 
    if (dev->file != 1) {
       goto bail_out;
    }
 
    Pmsg0(0, _("Now forward spacing 2 files.\n"));

-   if (!fsf_dev(dev, 2)) {
-      Pmsg1(0, "Bad status from fsr. ERR=%s\n", strerror_dev(dev));
+   if (!dev->fsf(2)) {
+      Pmsg1(0, _("Bad status from fsr. ERR=%s\n"), dev->bstrerror());

       goto bail_out;
    }
       goto bail_out;
    }

-   Pmsg2(-1, _("We should be in file 3. I am at file %d. This is %s\n"), 
-      dev->file, dev->file == 3 ? "correct!" : "NOT correct!!!!");
+   Pmsg2(-1, _("We should be in file 3. I am at file %d. %s\n"),
+      dev->file, dev->file == 3 ? _("This is correct!") : _("This is NOT correct!!!!"));

 
    if (dev->file != 3) {
       goto bail_out;
 
    if (dev->file != 3) {
       goto bail_out;


@@ -1270,29 +1344,29 @@ test_again:
 
    rewindcmd();
    Pmsg0(0, _("Now forward spacing 4 files.\n"));
 
    rewindcmd();
    Pmsg0(0, _("Now forward spacing 4 files.\n"));

-   if (!fsf_dev(dev, 4)) {
-      Pmsg1(0, "Bad status from fsr. ERR=%s\n", strerror_dev(dev));
+   if (!dev->fsf(4)) {
+      Pmsg1(0, _("Bad status from fsr. ERR=%s\n"), dev->bstrerror());

       goto bail_out;
    }
       goto bail_out;
    }

-   Pmsg2(-1, _("We should be in file 4. I am at file %d. This is %s\n"), 
-      dev->file, dev->file == 4 ? "correct!" : "NOT correct!!!!");
+   Pmsg2(-1, _("We should be in file 4. I am at file %d. %s\n"),
+      dev->file, dev->file == 4 ? _("This is correct!") : _("This is NOT correct!!!!"));

 
    if (dev->file != 4) {
       goto bail_out;
    }
    if (set_off) {
 
    if (dev->file != 4) {
       goto bail_out;
    }
    if (set_off) {

-      Pmsg0(-1, "The test worked this time. Please add:\n\n"
+      Pmsg0(-1, _("The test worked this time. Please add:\n\n"

                 "   Fast Forward Space File = no\n\n"
                 "   Fast Forward Space File = no\n\n"

-                "to your Device resource for this drive.\n");
+                "to your Device resource for this drive.\n"));

    }
 
    Pmsg0(-1, "\n");
    Pmsg0(0, _("Now forward spacing 1 more file.\n"));
    }
 
    Pmsg0(-1, "\n");
    Pmsg0(0, _("Now forward spacing 1 more file.\n"));

-   if (!fsf_dev(dev, 1)) {
-      Pmsg1(0, "Bad status from fsr. ERR=%s\n", strerror_dev(dev));
+   if (!dev->fsf(1)) {
+      Pmsg1(0, _("Bad status from fsr. ERR=%s\n"), dev->bstrerror());

    }
    }

-   Pmsg2(-1, _("We should be in file 5. I am at file %d. This is %s\n"), 
-      dev->file, dev->file == 5 ? "correct!" : "NOT correct!!!!");
+   Pmsg2(-1, _("We should be in file 5. I am at file %d. %s\n"),
+      dev->file, dev->file == 5 ? _("This is correct!") : _("This is NOT correct!!!!"));

    if (dev->file != 5) {
       goto bail_out;
    }
    if (dev->file != 5) {
       goto bail_out;
    }


@@ -1301,14 +1375,17 @@ test_again:
 
 bail_out:
    Pmsg0(-1, _("\nThe forward space file test failed.\n"));
 
 bail_out:
    Pmsg0(-1, _("\nThe forward space file test failed.\n"));

-   if (dev_cap(dev, CAP_FASTFSF)) {
-      Pmsg0(-1, "You have Fast Forward Space File enabled.\n"
-              "I am turning it off then retrying the test.\n");
-      dev->capabilities &= ~CAP_FASTFSF;
+   if (dev->has_cap(CAP_FASTFSF)) {
+      Pmsg0(-1, _("You have Fast Forward Space File enabled.\n"
+              "I am turning it off then retrying the test.\n"));
+      dev->clear_cap(CAP_FASTFSF);

       set_off = true;
       goto test_again;
    }
       set_off = true;
       goto test_again;
    }

-   Pmsg0(-1, "You must correct this error or Bacula will not work.\n");
+   Pmsg0(-1, _("You must correct this error or Bacula will not work.\n"
+            "Some systems, e.g. OpenBSD, require you to set\n"
+            "   Use MTIOCGET= no\n"
+            "in your device resource. Use with caution.\n"));

    return -2;
 }
 
    return -2;
 }
 


@@ -1316,7 +1393,7 @@ bail_out:
 
 
 
 
 
 

-/* 
+/*

  * This is a general test of Bacula's functions
  *   needed to read and write the tape.
  */
  * This is a general test of Bacula's functions
  *   needed to read and write the tape.
  */


@@ -1332,52 +1409,52 @@ static void testcmd()
    }
 
    stat = append_test();
    }
 
    stat = append_test();

-   if (stat == 1) {                  /* OK get out */
+   if (stat == 1) {                   /* OK get out */

       goto all_done;
    }
       goto all_done;
    }

-   if (stat == -1) {                 /* first test failed */
-      if (dev_cap(dev, CAP_EOM) || dev_cap(dev, CAP_FASTFSF)) {
-         Pmsg0(-1, "\nAppend test failed. Attempting again.\n"
+   if (stat == -1) {                  /* first test failed */
+      if (dev->has_cap(CAP_EOM) || dev->has_cap(CAP_FASTFSF)) {
+         Pmsg0(-1, _("\nAppend test failed. Attempting again.\n"

                    "Setting \"Hardware End of Medium = no\n"
                    "    and \"Fast Forward Space File = no\n"
                    "Setting \"Hardware End of Medium = no\n"
                    "    and \"Fast Forward Space File = no\n"

-                   "and retrying append test.\n\n");
-        dev->capabilities &= ~CAP_EOM; /* turn off eom */
-        dev->capabilities &= ~CAP_FASTFSF; /* turn off fast fsf */
-        stat = append_test();
-        if (stat == 1) {
-            Pmsg0(-1, "\n\nIt looks like the test worked this time, please add:\n\n"
+                   "and retrying append test.\n\n"));
+         dev->clear_cap(CAP_EOM);      /* turn off eom */
+         dev->clear_cap(CAP_FASTFSF);  /* turn off fast fsf */
+         stat = append_test();
+         if (stat == 1) {
+            Pmsg0(-1, _("\n\nIt looks like the test worked this time, please add:\n\n"

                      "    Hardware End of Medium = No\n\n"
                      "    Fast Forward Space File = No\n"
                      "    Hardware End of Medium = No\n\n"
                      "    Fast Forward Space File = No\n"

-                     "to your Device resource in the Storage conf file.\n");
-           goto all_done;
-        }
-        if (stat == -1) {
-            Pmsg0(-1, "\n\nThat appears *NOT* to have corrected the problem.\n");
-           goto failed;
-        }
-        /* Wrong count after append */
-        if (stat == -2) {
-            Pmsg0(-1, "\n\nIt looks like the append failed. Attempting again.\n"
-                     "Setting \"BSF at EOM = yes\" and retrying append test.\n");
-           dev->capabilities |= CAP_BSFATEOM; /* backspace on eom */
-           stat = append_test();
-           if (stat == 1) {
-               Pmsg0(-1, "\n\nIt looks like the test worked this time, please add:\n\n"
+                     "to your Device resource in the Storage conf file.\n"));
+            goto all_done;
+         }
+         if (stat == -1) {
+            Pmsg0(-1, _("\n\nThat appears *NOT* to have corrected the problem.\n"));
+            goto failed;
+         }
+         /* Wrong count after append */
+         if (stat == -2) {
+            Pmsg0(-1, _("\n\nIt looks like the append failed. Attempting again.\n"
+                     "Setting \"BSF at EOM = yes\" and retrying append test.\n"));
+            dev->capabilities |= CAP_BSFATEOM; /* backspace on eom */
+            stat = append_test();
+            if (stat == 1) {
+               Pmsg0(-1, _("\n\nIt looks like the test worked this time, please add:\n\n"

                      "    Hardware End of Medium = No\n"
                      "    Fast Forward Space File = No\n"
                      "    BSF at EOM = yes\n\n"
                      "    Hardware End of Medium = No\n"
                      "    Fast Forward Space File = No\n"
                      "    BSF at EOM = yes\n\n"

-                     "to your Device resource in the Storage conf file.\n");
-              goto all_done;
-           }
-        }
+                     "to your Device resource in the Storage conf file.\n"));
+               goto all_done;
+            }
+         }

 
       }
 failed:
 
       }
 failed:

-      Pmsg0(-1, "\nAppend test failed.\n\n");
-      Pmsg0(-1, "\n!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!\n"
+      Pmsg0(-1, _("\nAppend test failed.\n\n"
+            "\n!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!\n"

             "Unable to correct the problem. You MUST fix this\n"
             "Unable to correct the problem. You MUST fix this\n"

-             "problem before Bacula can use your tape drive correctly\n");
-      Pmsg0(-1, "\nPerhaps running Bacula in fixed block mode will work.\n"
+             "problem before Bacula can use your tape drive correctly\n"
+            "\nPerhaps running Bacula in fixed block mode will work.\n"

             "Do so by setting:\n\n"
             "Minimum Block Size = nnn\n"
             "Maximum Block Size = nnn\n\n"
             "Do so by setting:\n\n"
             "Minimum Block Size = nnn\n"
             "Maximum Block Size = nnn\n\n"


@@ -1385,7 +1462,11 @@ failed:
             "nnn must match your tape driver's block size, which\n"
             "can be determined by reading your tape manufacturers\n"
             "information, and the information on your kernel dirver.\n"
             "nnn must match your tape driver's block size, which\n"
             "can be determined by reading your tape manufacturers\n"
             "information, and the information on your kernel dirver.\n"

-            "Fixed block sizes, however, are not normally an ideal solution.\n");
+            "Fixed block sizes, however, are not normally an ideal solution.\n"
+            "\n"
+            "Some systems, e.g. OpenBSD, require you to set\n"
+            "   Use MTIOCGET= no\n"
+            "in your device resource. Use with caution.\n"));

        return;
    }
 
        return;
    }
 


@@ -1399,24 +1480,23 @@ all_done:
         "End of File mark.\n"
         "3 blocks of 64448 bytes in file 3\n"
         "End of File mark.\n"
         "End of File mark.\n"
         "3 blocks of 64448 bytes in file 3\n"
         "End of File mark.\n"

-        "1 block of 64448 bytes in file 4\n" 
+        "1 block of 64448 bytes in file 4\n"

         "End of File mark.\n"
         "Total files=4, blocks=7, bytes = 451,136\n"
         "End of File mark.\n"
         "Total files=4, blocks=7, bytes = 451,136\n"

-        "=== End sample correct output ===\n\n"));
-
-   Pmsg0(-1, _("If the above scan output is not identical to the\n"
-               "sample output, you MUST correct the problem\n"
-               "or Bacula will not be able to write multiple Jobs to \n"
-               "the tape.\n\n"));
+        "=== End sample correct output ===\n\n"
+        "If the above scan output is not identical to the\n"
+        "sample output, you MUST correct the problem\n"
+        "or Bacula will not be able to write multiple Jobs to \n"
+        "the tape.\n\n"));

 
    if (stat == 1) {
       re_read_block_test();
    }
 
 
    if (stat == 1) {
       re_read_block_test();
    }
 

-   fsf_test();                       /* do fast forward space file test */
+   fsf_test();                        /* do fast forward space file test */
+
+   autochanger_test();                /* do autochanger test */

 
 

-   autochanger_test();               /* do autochanger test */
-   

 }
 
 /* Forward space a file */
 }
 
 /* Forward space a file */


@@ -1429,11 +1509,16 @@ static void fsfcmd()
    if (num <= 0) {
       num = 1;
    }
    if (num <= 0) {
       num = 1;
    }

-   if (!fsf_dev(dev, num)) {
-      Pmsg1(0, "Bad status from fsf. ERR=%s\n", strerror_dev(dev));
+   if (!dev->fsf(num)) {
+      Pmsg1(0, _("Bad status from fsf. ERR=%s\n"), dev->bstrerror());

       return;
    }
       return;
    }

-   Pmsg2(0, "Forward spaced %d file%s.\n", num, num==1?"":"s");
+   if (num == 1) {
+      Pmsg0(0, _("Forward spaced 1 file.\n"));
+   }
+   else {
+      Pmsg1(0, _("Forward spaced %d files.\n"), num);
+   }

 }
 
 /* Forward space a record */
 }
 
 /* Forward space a record */


@@ -1446,13 +1531,26 @@ static void fsrcmd()
    if (num <= 0) {
       num = 1;
    }
    if (num <= 0) {
       num = 1;
    }

-   if (!fsr_dev(dev, num)) {
-      Pmsg1(0, "Bad status from fsr. ERR=%s\n", strerror_dev(dev));
+   if (!dev->fsr(num)) {
+      Pmsg1(0, _("Bad status from fsr. ERR=%s\n"), dev->bstrerror());

       return;
    }
       return;
    }

-   Pmsg2(0, "Forward spaced %d record%s.\n", num, num==1?"":"s");
+   if (num == 1) {
+      Pmsg0(0, _("Forward spaced 1 record.\n"));
+   }
+   else {
+      Pmsg1(0, _("Forward spaced %d records.\n"), num);
+   }

 }
 
 }
 

+/*
+ * Read a Bacula block from the tape
+ */
+static void rbcmd()
+{
+   dev->open(dcr, OPEN_READ_ONLY);
+   read_block_from_dev(dcr, NO_BLOCK_NUMBER_CHECK);  
+}

 
 /*
  * Write a Bacula block to the tape
 
 /*
  * Write a Bacula block to the tape


@@ -1463,6 +1561,9 @@ static void wrcmd()
    DEV_RECORD *rec = dcr->rec;
    int i;
 
    DEV_RECORD *rec = dcr->rec;
    int i;
 

+   if (!dev->is_open()) {
+      open_the_device();
+   }

    sm_check(__FILE__, __LINE__, false);
    empty_block(block);
    if (verbose > 1) {
    sm_check(__FILE__, __LINE__, false);
    empty_block(block);
    if (verbose > 1) {


@@ -1476,11 +1577,11 @@ static void wrcmd()
    rec->data_len = i;
    sm_check(__FILE__, __LINE__, false);
    if (!write_record_to_block(block, rec)) {
    rec->data_len = i;
    sm_check(__FILE__, __LINE__, false);
    if (!write_record_to_block(block, rec)) {

-      Pmsg0(0, _("Error writing record to block.\n")); 
+      Pmsg0(0, _("Error writing record to block.\n"));

       goto bail_out;
    }
    if (!write_block_to_dev(dcr)) {
       goto bail_out;
    }
    if (!write_block_to_dev(dcr)) {

-      Pmsg0(0, _("Error writing block to device.\n")); 
+      Pmsg0(0, _("Error writing block to device.\n"));

       goto bail_out;
    } else {
       Pmsg1(0, _("Wrote one record of %d bytes.\n"), i);
       goto bail_out;
    } else {
       Pmsg1(0, _("Wrote one record of %d bytes.\n"), i);


@@ -1492,7 +1593,7 @@ bail_out:
    sm_check(__FILE__, __LINE__, false);
 }
 
    sm_check(__FILE__, __LINE__, false);
 }
 

-/* 
+/*

  * Read a record from the tape
  */
 static void rrcmd()
  * Read a record from the tape
  */
 static void rrcmd()


@@ -1500,7 +1601,7 @@ static void rrcmd()
    char *buf;
    int stat, len;
 
    char *buf;
    int stat, len;
 

-   if (!get_cmd("Enter length to read: ")) {
+   if (!get_cmd(_("Enter length to read: "))) {

       return;
    }
    len = atoi(cmd);
       return;
    }
    len = atoi(cmd);


@@ -1509,12 +1610,13 @@ static void rrcmd()
       len = 1024;
    }
    buf = (char *)malloc(len);
       len = 1024;
    }
    buf = (char *)malloc(len);

-   stat = read(dev->fd, buf, len);
+   stat = read(dev->fd(), buf, len);

    if (stat > 0 && stat <= len) {
       errno = 0;
    }
    if (stat > 0 && stat <= len) {
       errno = 0;
    }

+   berrno be;

    Pmsg3(0, _("Read of %d bytes gives stat=%d. ERR=%s\n"),
    Pmsg3(0, _("Read of %d bytes gives stat=%d. ERR=%s\n"),

-      len, stat, strerror(errno));
+      len, stat, be.bstrerror());

    free(buf);
 }
 
    free(buf);
 }
 


@@ -1536,58 +1638,68 @@ static void scancmd()
    blocks = block_size = tot_blocks = 0;
    bytes = 0;
    if (dev->state & ST_EOT) {
    blocks = block_size = tot_blocks = 0;
    bytes = 0;
    if (dev->state & ST_EOT) {

-      Pmsg0(0, "End of tape\n");
-      return; 
+      Pmsg0(0, _("End of tape\n"));
+      return;

    }
    }

-   update_pos_dev(dev);
+   dev->update_pos(dcr);

    tot_files = dev->file;
    Pmsg1(0, _("Starting scan at file %u\n"), dev->file);
    for (;;) {
    tot_files = dev->file;
    Pmsg1(0, _("Starting scan at file %u\n"), dev->file);
    for (;;) {

-      if ((stat = read(dev->fd, buf, sizeof(buf))) < 0) {
-        clrerror_dev(dev, -1);
-         Mmsg2(dev->errmsg, "read error on %s. ERR=%s.\n",
-           dev->dev_name, strerror(dev->dev_errno));
-         Pmsg2(0, "Bad status from read %d. ERR=%s\n", stat, strerror_dev(dev));
-        if (blocks > 0)
-            printf("%d block%s of %d bytes in file %d\n",        
-                    blocks, blocks>1?"s":"", block_size, dev->file);
-        return;
+      if ((stat = read(dev->fd(), buf, sizeof(buf))) < 0) {
+         berrno be;
+         dev->clrerror(-1);
+         Mmsg2(dev->errmsg, _("read error on %s. ERR=%s.\n"),
+            dev->dev_name, be.bstrerror());
+         Pmsg2(0, _("Bad status from read %d. ERR=%s\n"), stat, dev->bstrerror());
+         if (blocks > 0) {
+            if (blocks==1) {
+               printf(_("1 block of %d bytes in file %d\n"), block_size, dev->file);
+            }
+            else {
+               printf(_("%d blocks of %d bytes in file %d\n"), blocks, block_size, dev->file);
+            }
+         }
+         return;

       }
       Dmsg1(200, "read status = %d\n", stat);
 /*    sleep(1); */
       if (stat != block_size) {
       }
       Dmsg1(200, "read status = %d\n", stat);
 /*    sleep(1); */
       if (stat != block_size) {

-        update_pos_dev(dev);
-        if (blocks > 0) {
-            printf("%d block%s of %d bytes in file %d\n", 
-                 blocks, blocks>1?"s":"", block_size, dev->file);
-           blocks = 0;
-        }
-        block_size = stat;
+         dev->update_pos(dcr);
+         if (blocks > 0) {
+            if (blocks==1) {
+               printf(_("1 block of %d bytes in file %d\n"), block_size, dev->file);
+            }
+            else {
+               printf(_("%d blocks of %d bytes in file %d\n"), blocks, block_size, dev->file);
+            }
+            blocks = 0;
+         }
+         block_size = stat;

       }
       }

-      if (stat == 0) {               /* EOF */
-        update_pos_dev(dev);
-         printf("End of File mark.\n");
-        /* Two reads of zero means end of tape */
-        if (dev->state & ST_EOF)
-           dev->state |= ST_EOT;
-        else {
-           dev->state |= ST_EOF;
-           dev->file++;
-        }
-        if (dev->state & ST_EOT) {
-            printf("End of tape\n");
-           break;
-        }
-      } else {                       /* Got data */
-        dev->state &= ~ST_EOF;
-        blocks++;
-        tot_blocks++;
-        bytes += stat;
+      if (stat == 0) {                /* EOF */
+         dev->update_pos(dcr);
+         printf(_("End of File mark.\n"));
+         /* Two reads of zero means end of tape */
+         if (dev->state & ST_EOF)
+            dev->state |= ST_EOT;
+         else {
+            dev->state |= ST_EOF;
+            dev->file++;
+         }
+         if (dev->state & ST_EOT) {
+            printf(_("End of tape\n"));
+            break;
+         }
+      } else {                        /* Got data */
+         dev->state &= ~ST_EOF;
+         blocks++;
+         tot_blocks++;
+         bytes += stat;

       }
    }
       }
    }

-   update_pos_dev(dev);
+   dev->update_pos(dcr);

    tot_files = dev->file - tot_files;
    tot_files = dev->file - tot_files;

-   printf("Total files=%d, blocks=%d, bytes = %s\n", tot_files, tot_blocks, 
+   printf(_("Total files=%d, blocks=%d, bytes = %s\n"), tot_files, tot_blocks,

       edit_uint64_with_commas(bytes, ec1));
 }
 
       edit_uint64_with_commas(bytes, ec1));
 }
 


@@ -1605,68 +1717,85 @@ static void scan_blocks()
    uint64_t bytes;
    DEV_BLOCK *block = dcr->block;
    char ec1[50];
    uint64_t bytes;
    DEV_BLOCK *block = dcr->block;
    char ec1[50];

+   char buf1[100], buf2[100];

 
    blocks = block_size = tot_blocks = 0;
    bytes = 0;
 
    empty_block(block);
 
    blocks = block_size = tot_blocks = 0;
    bytes = 0;
 
    empty_block(block);

-   update_pos_dev(dev);
+   dev->update_pos(dcr);

    tot_files = dev->file;
    for (;;) {
       if (!read_block_from_device(dcr, NO_BLOCK_NUMBER_CHECK)) {
    tot_files = dev->file;
    for (;;) {
       if (!read_block_from_device(dcr, NO_BLOCK_NUMBER_CHECK)) {

-         Dmsg1(100, "!read_block(): ERR=%s\n", strerror_dev(dev));
-        if (dev->state & ST_EOT) {
-           if (blocks > 0) {
-               printf("%d block%s of %d bytes in file %d\n", 
-                    blocks, blocks>1?"s":"", block_size, dev->file);
-              blocks = 0;
-           }
-           goto bail_out;
-        }
-        if (dev->state & ST_EOF) {
-           if (blocks > 0) {
-               printf("%d block%s of %d bytes in file %d\n",        
-                       blocks, blocks>1?"s":"", block_size, dev->file);
-              blocks = 0;
-           }
+         Dmsg1(100, "!read_block(): ERR=%s\n", dev->bstrerror());
+         if (dev->state & ST_EOT) {
+            if (blocks > 0) {
+               if (blocks==1) {
+                  printf(_("1 block of %d bytes in file %d\n"), block_size, dev->file);
+               }
+               else {
+                  printf(_("%d blocks of %d bytes in file %d\n"), blocks, block_size, dev->file);
+               }
+               blocks = 0;
+            }
+            goto bail_out;
+         }
+         if (dev->state & ST_EOF) {
+            if (blocks > 0) {
+               if (blocks==1) {
+                  printf(_("1 block of %d bytes in file %d\n"), block_size, dev->file);
+               }
+               else {
+                  printf(_("%d blocks of %d bytes in file %d\n"), blocks, block_size, dev->file);
+               }
+               blocks = 0;
+            }

             printf(_("End of File mark.\n"));
             printf(_("End of File mark.\n"));

-           continue;
-        }
-        if (dev->state & ST_SHORT) {
-           if (blocks > 0) {
-               printf("%d block%s of %d bytes in file %d\n",        
-                       blocks, blocks>1?"s":"", block_size, dev->file);
-              blocks = 0;
-           }
+            continue;
+         }
+         if (dev->state & ST_SHORT) {
+            if (blocks > 0) {
+               if (blocks==1) {
+                  printf(_("1 block of %d bytes in file %d\n"), block_size, dev->file);
+               }
+               else {
+                  printf(_("%d blocks of %d bytes in file %d\n"), blocks, block_size, dev->file);
+               }
+               blocks = 0;
+            }

             printf(_("Short block read.\n"));
             printf(_("Short block read.\n"));

-           continue;
-        }
-         printf(_("Error reading block. ERR=%s\n"), strerror_dev(dev));
-        goto bail_out;
+            continue;
+         }
+         printf(_("Error reading block. ERR=%s\n"), dev->bstrerror());
+         goto bail_out;

       }
       if (block->block_len != block_size) {
       }
       if (block->block_len != block_size) {

-        if (blocks > 0) {
-            printf("%d block%s of %d bytes in file %d\n",        
-                    blocks, blocks>1?"s":"", block_size, dev->file);
-           blocks = 0;
-        }
-        block_size = block->block_len;
+         if (blocks > 0) {
+            if (blocks==1) {
+               printf(_("1 block of %d bytes in file %d\n"), block_size, dev->file);
+            }
+            else {
+               printf(_("%d blocks of %d bytes in file %d\n"), blocks, block_size, dev->file);
+            }
+            blocks = 0;
+         }
+         block_size = block->block_len;

       }
       blocks++;
       tot_blocks++;
       bytes += block->block_len;
       Dmsg6(100, "Blk_blk=%u dev_blk=%u blen=%u bVer=%d SessId=%u SessTim=%u\n",
       }
       blocks++;
       tot_blocks++;
       bytes += block->block_len;
       Dmsg6(100, "Blk_blk=%u dev_blk=%u blen=%u bVer=%d SessId=%u SessTim=%u\n",

-        block->BlockNumber, dev->block_num, block->block_len, block->BlockVer,
-        block->VolSessionId, block->VolSessionTime);
+         block->BlockNumber, dev->block_num, block->block_len, block->BlockVer,
+         block->VolSessionId, block->VolSessionTime);

       if (verbose == 1) {
       if (verbose == 1) {

-        DEV_RECORD *rec = new_record();
-        read_record_from_block(block, rec);
-         Pmsg8(-1, "Blk_block: %u dev_blk=%u blen=%u First rec FI=%s SessId=%u SessTim=%u Strm=%s rlen=%d\n",
-             block->BlockNumber, dev->block_num, block->block_len,
-             FI_to_ascii(rec->FileIndex), rec->VolSessionId, rec->VolSessionTime,
-             stream_to_ascii(rec->Stream, rec->FileIndex), rec->data_len);
-        rec->remainder = 0;
-        free_record(rec);
+         DEV_RECORD *rec = new_record();
+         read_record_from_block(dcr, block, rec);
+         Pmsg8(-1, _("Blk_block: %u dev_blk=%u blen=%u First rec FI=%s SessId=%u SessTim=%u Strm=%s rlen=%d\n"),
+              block->BlockNumber, dev->block_num, block->block_len,
+              FI_to_ascii(buf1, rec->FileIndex), rec->VolSessionId, rec->VolSessionTime,
+              stream_to_ascii(buf2, rec->Stream, rec->FileIndex), rec->data_len);
+         rec->remainder = 0;
+         free_record(rec);

       } else if (verbose > 1) {
          dump_block(block, "");
       }
       } else if (verbose > 1) {
          dump_block(block, "");
       }


@@ -1674,7 +1803,7 @@ static void scan_blocks()
    }
 bail_out:
    tot_files = dev->file - tot_files;
    }
 bail_out:
    tot_files = dev->file - tot_files;

-   printf("Total files=%d, blocks=%d, bytes = %s\n", tot_files, tot_blocks, 
+   printf(_("Total files=%d, blocks=%d, bytes = %s\n"), tot_files, tot_blocks,

       edit_uint64_with_commas(bytes, ec1));
 }
 
       edit_uint64_with_commas(bytes, ec1));
 }
 


@@ -1683,7 +1812,7 @@ static void statcmd()
 {
    int debug = debug_level;
    debug_level = 30;
 {
    int debug = debug_level;
    debug_level = 30;

-   Pmsg2(0, "Device status: %u. ERR=%s\n", status_dev(dev), strerror_dev(dev));
+   Pmsg2(0, _("Device status: %u. ERR=%s\n"), status_dev(dev), dev->bstrerror());

 #ifdef xxxx
    dump_volume_label(dev);
 #endif
 #ifdef xxxx
    dump_volume_label(dev);
 #endif


@@ -1691,18 +1820,20 @@ static void statcmd()
 }
 
 
 }
 
 

-/* 
+/*

  * First we label the tape, then we fill
  *  it with data get a new tape and write a few blocks.
  * First we label the tape, then we fill
  *  it with data get a new tape and write a few blocks.

- */                           
+ */

 static void fillcmd()
 {
    DEV_RECORD rec;
    DEV_BLOCK  *block = dcr->block;
    char ec1[50];
 static void fillcmd()
 {
    DEV_RECORD rec;
    DEV_BLOCK  *block = dcr->block;
    char ec1[50];

+   char buf1[100], buf2[100];

    int fd;
    uint32_t i;
    uint32_t min_block_size;
    int fd;
    uint32_t i;
    uint32_t min_block_size;

+   struct tm tm;

 
    ok = true;
    stop = 0;
 
    ok = true;
    stop = 0;


@@ -1711,50 +1842,53 @@ static void fillcmd()
    last_block_num = 0;
    BlockNumber = 0;
 
    last_block_num = 0;
    BlockNumber = 0;
 

-   Pmsg0(-1, "\n\
-This command simulates Bacula writing to a tape.\n\
-It requires either one or two blank tapes, which it\n\
-will label and write.\n\n\
-If you have an autochanger configured, it will use\n\
-the tapes that are in slots 1 and 2, otherwise, you will\n\
-be prompted to insert the tapes when necessary.\n\n\
-It will print a status approximately\n\
-every 322 MB, and write an EOF every 3.2 GB.  If you have\n\
-selected the simple test option, after writing the first tape\n\
-it will rewind it and re-read the last block written.\n\n\
-If you have selected the multiple tape test, when the first tape\n\
-fills, it will ask for a second, and after writing a few more \n\
-blocks, it will stop.  Then it will begin re-reading the\n\
-two tapes.\n\n\
-This may take a long time -- hours! ...\n\n");
-
-   get_cmd("Do you want to run the simplified test (s) with one tape\n"
-           "or the complete multiple tape (m) test: (s/m) ");
+   Pmsg0(-1, _("\n"
+"This command simulates Bacula writing to a tape.\n"
+"It requires either one or two blank tapes, which it\n"
+"will label and write.\n\n"
+"If you have an autochanger configured, it will use\n"
+"the tapes that are in slots 1 and 2, otherwise, you will\n"
+"be prompted to insert the tapes when necessary.\n\n"
+"It will print a status approximately\n"
+"every 322 MB, and write an EOF every 3.2 GB.  If you have\n"
+"selected the simple test option, after writing the first tape\n"
+"it will rewind it and re-read the last block written.\n\n"
+"If you have selected the multiple tape test, when the first tape\n"
+"fills, it will ask for a second, and after writing a few more \n"
+"blocks, it will stop.  Then it will begin re-reading the\n"
+"two tapes.\n\n"
+"This may take a long time -- hours! ...\n\n"));
+
+   get_cmd(_("Do you want to run the simplified test (s) with one tape\n"
+           "or the complete multiple tape (m) test: (s/m) "));

    if (cmd[0] == 's') {
    if (cmd[0] == 's') {

-      Pmsg0(-1, "Simple test (single tape) selected.\n");
+      Pmsg0(-1, _("Simple test (single tape) selected.\n"));

       simple = true;
    } else if (cmd[0] == 'm') {
       simple = true;
    } else if (cmd[0] == 'm') {

-      Pmsg0(-1, "Multiple tape test selected.\n"); 
+      Pmsg0(-1, _("Multiple tape test selected.\n"));

       simple = false;
    } else {
       simple = false;
    } else {

-      Pmsg0(000, "Command aborted.\n");
+      Pmsg0(000, _("Command aborted.\n"));

       return;
    }
 
       return;
    }
 

-   Dmsg1(20, "Begin append device=%s\n", dev_name(dev));
+   Dmsg1(20, "Begin append device=%s\n", dev->print_name());

    Dmsg1(20, "MaxVolSize=%s\n", edit_uint64(dev->max_volume_size, ec1));
 
    /* Use fixed block size to simplify read back */
    min_block_size = dev->min_block_size;
    dev->min_block_size = dev->max_block_size;
    Dmsg1(20, "MaxVolSize=%s\n", edit_uint64(dev->max_volume_size, ec1));
 
    /* Use fixed block size to simplify read back */
    min_block_size = dev->min_block_size;
    dev->min_block_size = dev->max_block_size;

+   set_volume_name("TestVolume1", 1);
+   dir_ask_sysop_to_create_appendable_volume(dcr);
+   dev->set_append();                 /* force volume to be relabeled */

 
 

-   /* 
+   /*

     * Acquire output device for writing.  Note, after acquiring a
     * Acquire output device for writing.  Note, after acquiring a

-    *  device, we MUST release it, which is done at the end of this
-    *  subroutine.
+    *   device, we MUST release it, which is done at the end of this
+    *   subroutine.

     */
    Dmsg0(100, "just before acquire_device\n");
     */
    Dmsg0(100, "just before acquire_device\n");

-   if (!acquire_device_for_append(jcr)) {
+   if (!acquire_device_for_append(dcr)) {

       set_jcr_job_status(jcr, JS_ErrorTerminated);
       return;
    }
       set_jcr_job_status(jcr, JS_ErrorTerminated);
       return;
    }


@@ -1767,10 +1901,10 @@ This may take a long time -- hours! ...\n\n");
    if (!write_session_label(dcr, SOS_LABEL)) {
       set_jcr_job_status(jcr, JS_ErrorTerminated);
       Jmsg1(jcr, M_FATAL, 0, _("Write session label failed. ERR=%s\n"),
    if (!write_session_label(dcr, SOS_LABEL)) {
       set_jcr_job_status(jcr, JS_ErrorTerminated);
       Jmsg1(jcr, M_FATAL, 0, _("Write session label failed. ERR=%s\n"),

-        strerror_dev(dev));
+         dev->bstrerror());

       ok = false;
    }
       ok = false;
    }

-   Pmsg0(-1, "Wrote Start Of Session label.\n");
+   Pmsg0(-1, _("Wrote Start of Session label.\n"));

 
    memset(&rec, 0, sizeof(rec));
    rec.data = get_memory(100000);     /* max record size */
 
    memset(&rec, 0, sizeof(rec));
    rec.data = get_memory(100000);     /* max record size */


@@ -1778,30 +1912,32 @@ This may take a long time -- hours! ...\n\n");
 #define REC_SIZE 32768
    rec.data_len = REC_SIZE;
 
 #define REC_SIZE 32768
    rec.data_len = REC_SIZE;
 

-   /* 
+   /*

     * Put some random data in the record
     */
    fd = open("/dev/urandom", O_RDONLY);
     * Put some random data in the record
     */
    fd = open("/dev/urandom", O_RDONLY);

-   if (fd) {
+   if (fd != -1) {

       read(fd, rec.data, rec.data_len);
       close(fd);
    } else {
       uint32_t *p = (uint32_t *)rec.data;
       srandom(time(NULL));
       for (i=0; i<rec.data_len/sizeof(uint32_t); i++) {
       read(fd, rec.data, rec.data_len);
       close(fd);
    } else {
       uint32_t *p = (uint32_t *)rec.data;
       srandom(time(NULL));
       for (i=0; i<rec.data_len/sizeof(uint32_t); i++) {

-        p[i] = random();
+         p[i] = random();

       }
    }
 
       }
    }
 

-   /* 
-    * Generate data as if from File daemon, write to device   
+   /*
+    * Generate data as if from File daemon, write to device

     */
    jcr->dcr->VolFirstIndex = 0;
     */
    jcr->dcr->VolFirstIndex = 0;

-   time(&jcr->run_time);             /* start counting time for rates */
+   time(&jcr->run_time);              /* start counting time for rates */
+   (void)localtime_r(&jcr->run_time, &tm);
+   strftime(buf1, sizeof(buf1), "%H:%M:%S", &tm);

    if (simple) {
    if (simple) {

-      Pmsg0(-1, "Begin writing Bacula records to tape ...\n");
+      Pmsg1(-1, _("%s Begin writing Bacula records to tape ...\n"), buf1);

    } else {
    } else {

-      Pmsg0(-1, "Begin writing Bacula records to first tape ...\n");
+      Pmsg1(-1, _("%s Begin writing Bacula records to first tape ...\n"), buf1);

    }
    for (file_index = 0; ok && !job_canceled(jcr); ) {
       rec.VolSessionId = jcr->VolSessionId;
    }
    for (file_index = 0; ok && !job_canceled(jcr); ) {
       rec.VolSessionId = jcr->VolSessionId;


@@ -1813,90 +1949,96 @@ This may take a long time -- hours! ...\n\n");
       uint32_t *lp = (uint32_t *)rec.data;
       lp[0] += lp[13];
       for (i=1; i < (rec.data_len-sizeof(uint32_t))/sizeof(uint32_t)-1; i++) {
       uint32_t *lp = (uint32_t *)rec.data;
       lp[0] += lp[13];
       for (i=1; i < (rec.data_len-sizeof(uint32_t))/sizeof(uint32_t)-1; i++) {

-        lp[i] += lp[i-1];
+         lp[i] += lp[i-1];

       }
 
       Dmsg4(250, "before write_rec FI=%d SessId=%d Strm=%s len=%d\n",
       }
 
       Dmsg4(250, "before write_rec FI=%d SessId=%d Strm=%s len=%d\n",

-        rec.FileIndex, rec.VolSessionId, stream_to_ascii(rec.Stream, rec.FileIndex), 
-        rec.data_len);
-       
+         rec.FileIndex, rec.VolSessionId, 
+         stream_to_ascii(buf1, rec.Stream, rec.FileIndex),
+         rec.data_len);
+

       while (!write_record_to_block(block, &rec)) {
       while (!write_record_to_block(block, &rec)) {

-        /*
-         * When we get here we have just filled a block
-         */
+         /*
+          * When we get here we have just filled a block
+          */

          Dmsg2(150, "!write_record_to_block data_len=%d rem=%d\n", rec.data_len,
          Dmsg2(150, "!write_record_to_block data_len=%d rem=%d\n", rec.data_len,

-                   rec.remainder);
-
-        /* Write block to tape */
-        if (!flush_block(block, 1)) {
-           break;
-        }
-
-        /* Every 5000 blocks (approx 322MB) report where we are.
-         */
-        if ((block->BlockNumber % 5000) == 0) {
-           now = time(NULL);
-           now -= jcr->run_time;
-           if (now <= 0) {
-              now = 1;          /* prevent divide error */
-           }
-           kbs = (double)dev->VolCatInfo.VolCatBytes / (1000.0 * (double)now);
-            Pmsg4(-1, "Wrote blk_block=%u, dev_blk_num=%u VolBytes=%s rate=%.1f KB/s\n", 
-              block->BlockNumber, dev->block_num,
-              edit_uint64_with_commas(dev->VolCatInfo.VolCatBytes, ec1), (float)kbs);
-        }
-        /* Every 15000 blocks (approx 1GB) write an EOF.
-         */
-        if ((block->BlockNumber % 15000) == 0) {
-            Pmsg0(-1, "Flush block, write EOF\n");
-           flush_block(block, 0);
-           weof_dev(dev, 1);
-        }
-
-        /* Get out after writing 10 blocks to the second tape */
-        if (++BlockNumber > 10 && stop != 0) {      /* get out */
-           break;    
-        }
+                    rec.remainder);
+
+         /* Write block to tape */
+         if (!flush_block(block, 1)) {
+            break;
+         }
+
+         /* Every 5000 blocks (approx 322MB) report where we are.
+          */
+         if ((block->BlockNumber % 5000) == 0) {
+            now = time(NULL);
+            now -= jcr->run_time;
+            if (now <= 0) {
+               now = 1;          /* prevent divide error */
+            }
+            kbs = (double)dev->VolCatInfo.VolCatBytes / (1000.0 * (double)now);
+            Pmsg4(-1, _("Wrote blk_block=%u, dev_blk_num=%u VolBytes=%s rate=%.1f KB/s\n"),
+               block->BlockNumber, dev->block_num,
+               edit_uint64_with_commas(dev->VolCatInfo.VolCatBytes, ec1), (float)kbs);
+         }
+         /* Every 32000 blocks (approx 2GB) write an EOF.
+          */
+         if ((block->BlockNumber % 32000) == 0) {
+            now = time(NULL);
+            (void)localtime_r(&now, &tm);
+            strftime(buf1, sizeof(buf1), "%H:%M:%S", &tm);
+            Pmsg1(-1, _("%s Flush block, write EOF\n"), buf1);
+            flush_block(block, 0);
+            dev->weof(1);
+         }
+
+         /* Get out after writing 10 blocks to the second tape */
+         if (++BlockNumber > 10 && stop != 0) {      /* get out */
+            break;
+         }

       }
       if (!ok) {
          Pmsg0(000, _("Not OK\n"));
       }
       if (!ok) {
          Pmsg0(000, _("Not OK\n"));

-        break;
+         break;

       }
       jcr->JobBytes += rec.data_len;   /* increment bytes this job */
       Dmsg4(190, "write_record FI=%s SessId=%d Strm=%s len=%d\n",
       }
       jcr->JobBytes += rec.data_len;   /* increment bytes this job */
       Dmsg4(190, "write_record FI=%s SessId=%d Strm=%s len=%d\n",

-        FI_to_ascii(rec.FileIndex), rec.VolSessionId, 
-        stream_to_ascii(rec.Stream, rec.FileIndex), rec.data_len);
+         FI_to_ascii(buf1, rec.FileIndex), rec.VolSessionId,
+         stream_to_ascii(buf2, rec.Stream, rec.FileIndex), rec.data_len);

 
       /* Get out after writing 10 blocks to the second tape */
 
       /* Get out after writing 10 blocks to the second tape */

-      if (BlockNumber > 10 && stop != 0) {     /* get out */
-         Pmsg0(-1, "Done writing ...\n");
-        break;    
+      if (BlockNumber > 10 && stop != 0) {      /* get out */
+         char ed1[50];
+         Pmsg1(-1, "Done writing %s records ...\n", 
+             edit_uint64_with_commas(write_count, ed1));
+         break;

       }
    }
    if (vol_num > 1) {
       Dmsg0(100, "Write_end_session_label()\n");
       /* Create Job status for end of session label */
       if (!job_canceled(jcr) && ok) {
       }
    }
    if (vol_num > 1) {
       Dmsg0(100, "Write_end_session_label()\n");
       /* Create Job status for end of session label */
       if (!job_canceled(jcr) && ok) {

-        set_jcr_job_status(jcr, JS_Terminated);
+         set_jcr_job_status(jcr, JS_Terminated);

       } else if (!ok) {
       } else if (!ok) {

-        set_jcr_job_status(jcr, JS_ErrorTerminated);
+         set_jcr_job_status(jcr, JS_ErrorTerminated);

       }
       if (!write_session_label(dcr, EOS_LABEL)) {
       }
       if (!write_session_label(dcr, EOS_LABEL)) {

-         Pmsg1(000, _("Error writting end session label. ERR=%s\n"), strerror_dev(dev));
-        ok = false;
+         Pmsg1(000, _("Error writting end session label. ERR=%s\n"), dev->bstrerror());
+         ok = false;

       }
       /* Write out final block of this session */
       if (!write_block_to_device(dcr)) {
          Pmsg0(-1, _("Set ok=false after write_block_to_device.\n"));
       }
       /* Write out final block of this session */
       if (!write_block_to_device(dcr)) {
          Pmsg0(-1, _("Set ok=false after write_block_to_device.\n"));

-        ok = false;
+         ok = false;

       }
       }

-      Pmsg0(-1, _("Wrote End Of Session label.\n"));
+      Pmsg0(-1, _("Wrote End of Session label.\n"));

 
       /* Save last block info for second tape */
       last_block_num2 = last_block_num;
       last_file2 = last_file;
       if (last_block2) {
 
       /* Save last block info for second tape */
       last_block_num2 = last_block_num;
       last_file2 = last_file;
       if (last_block2) {

-        free_block(last_block2);
+         free_block(last_block2);

       }
       last_block2 = dup_block(last_block);
    }
       }
       last_block2 = dup_block(last_block);
    }


@@ -1914,22 +2056,27 @@ This may take a long time -- hours! ...\n\n");
       write(fd, last_block2->buf, last_block2->buf_len);
       write(fd, first_block->buf, first_block->buf_len);
       close(fd);
       write(fd, last_block2->buf, last_block2->buf_len);
       write(fd, first_block->buf, first_block->buf_len);
       close(fd);

-      Pmsg2(-1, "Wrote state file last_block_num1=%d last_block_num2=%d\n",
-        last_block_num1, last_block_num2);
+      Pmsg2(-1, _("Wrote state file last_block_num1=%d last_block_num2=%d\n"),
+         last_block_num1, last_block_num2);

    } else {
    } else {

+      berrno be;

       Pmsg2(-1, _("Could not create state file: %s ERR=%s\n"), buf,
       Pmsg2(-1, _("Could not create state file: %s ERR=%s\n"), buf,

-                strerror(errno));
+                 be.bstrerror());

    }
 
    }
 

-   /* Release the device if multiple tapes being used */
-   if (!simple && !release_device(jcr)) {
-      Pmsg0(-1, _("Error in release_device\n"));
-      ok = false;
+   now = time(NULL);
+   (void)localtime_r(&now, &tm);
+   strftime(buf1, sizeof(buf1), "%H:%M:%S", &tm);
+   if (simple) {
+      Pmsg3(-1, _("\n\n%s Done filling tape at %d:%d. Now beginning re-read of tape ...\n"),
+         buf1, jcr->dcr->dev->file, jcr->dcr->dev->block_num);
+   }
+   else {
+      Pmsg3(-1, _("\n\n%s Done filling tapes at %d:%d. Now beginning re-read of first tape ...\n"),
+         buf1, jcr->dcr->dev->file, jcr->dcr->dev->block_num);

    }
 
    }
 

-   Pmsg2(-1, _("\n\nDone filling tape%s. Now beginning re-read of %stape ...\n"),
-      simple?"":"s", simple?"":"first ");
-
+   jcr->dcr->block = block;

    do_unfill();
 
    dev->min_block_size = min_block_size;
    do_unfill();
 
    dev->min_block_size = min_block_size;


@@ -1952,7 +2099,7 @@ static void unfillcmd()
    sprintf(buf, "%s/btape.state", working_directory);
    fd = open(buf, O_RDONLY);
    if (fd >= 0) {
    sprintf(buf, "%s/btape.state", working_directory);
    fd = open(buf, O_RDONLY);
    if (fd >= 0) {

-      uint32_t state_level;             
+      uint32_t state_level;

       read(fd, &state_level, sizeof(btape_state_level));
       read(fd, &simple, sizeof(simple));
       read(fd, &last_block_num1, sizeof(last_block_num1));
       read(fd, &state_level, sizeof(btape_state_level));
       read(fd, &simple, sizeof(simple));
       read(fd, &last_block_num1, sizeof(last_block_num1));


@@ -1964,13 +2111,14 @@ static void unfillcmd()
       read(fd, first_block->buf, first_block->buf_len);
       close(fd);
       if (state_level != btape_state_level) {
       read(fd, first_block->buf, first_block->buf_len);
       close(fd);
       if (state_level != btape_state_level) {

-          Pmsg0(-1, "\nThe state file level has changed. You must redo\n"
-                  "the fill command.\n");
-         return;
+          Pmsg0(-1, _("\nThe state file level has changed. You must redo\n"
+                  "the fill command.\n"));
+          return;

        }
    } else {
        }
    } else {

-      Pmsg2(-1, "\nCould not find the state file: %s ERR=%s\n"
-             "You must redo the fill command.\n", buf, strerror(errno));
+      berrno be;
+      Pmsg2(-1, _("\nCould not find the state file: %s ERR=%s\n"
+             "You must redo the fill command.\n"), buf, be.bstrerror());

       return;
    }
    do_unfill();
       return;
    }
    do_unfill();


@@ -1980,68 +2128,84 @@ static void unfillcmd()
 static void do_unfill()
 {
    DEV_BLOCK *block = dcr->block;
 static void do_unfill()
 {
    DEV_BLOCK *block = dcr->block;

-   bool autochanger;
+   int autochanger;

 
    dumped = 0;
    VolBytes = 0;
    LastBlock = 0;
 
    Dmsg0(20, "Enter do_unfill\n");
 
    dumped = 0;
    VolBytes = 0;
    LastBlock = 0;
 
    Dmsg0(20, "Enter do_unfill\n");

-   dev->capabilities |= CAP_ANONVOLS; /* allow reading any volume */
-   dev->capabilities &= ~CAP_LABEL;   /* don't label anything here */
+   dev->set_cap(CAP_ANONVOLS);        /* allow reading any volume */
+   dev->clear_cap(CAP_LABEL);         /* don't label anything here */

 
    end_of_tape = 0;
 
 
    end_of_tape = 0;
 

-   time(&jcr->run_time);             /* start counting time for rates */
+   time(&jcr->run_time);              /* start counting time for rates */

    stop = 0;
    file_index = 0;
    if (last_block) {
       free_block(last_block);
    stop = 0;
    file_index = 0;
    if (last_block) {
       free_block(last_block);

+      last_block = NULL;

    }
    last_block_num = last_block_num1;
    last_file = last_file1;
    last_block = last_block1;
 
    }
    last_block_num = last_block_num1;
    last_file = last_file1;
    last_block = last_block1;
 

+   free_restore_volume_list(jcr);
+   jcr->bsr = NULL;
+   bstrncpy(dcr->VolumeName, "TestVolume1|TestVolume2", sizeof(dcr->VolumeName));
+   create_restore_volume_list(jcr);
+   if (jcr->VolList != NULL) {
+      jcr->VolList->Slot = 1;
+      if (jcr->VolList->next != NULL) {
+         jcr->VolList->next->Slot = 2;
+      }
+   }
+
+   set_volume_name("TestVolume1", 1);
+

    if (!simple) {
       /* Multiple Volume tape */
       /* Close device so user can use autochanger if desired */
    if (!simple) {
       /* Multiple Volume tape */
       /* Close device so user can use autochanger if desired */

-      if (dev_cap(dev, CAP_OFFLINEUNMOUNT)) {
-        offline_dev(dev);
+      if (dev->has_cap(CAP_OFFLINEUNMOUNT)) {
+         dev->offline();

       }
       autochanger = autoload_device(dcr, 1, NULL);
       }
       autochanger = autoload_device(dcr, 1, NULL);

-      if (!autochanger) {
-        force_close_dev(dev);
-         get_cmd(_("Mount first tape. Press enter when ready: ")); 
-      }
-      free_vol_list(jcr);
-      jcr->dcr = new_dcr(jcr, dev);
-      set_volume_name("TestVolume1", 1);
-      jcr->bsr = NULL;
-      create_vol_list(jcr);
-      close_dev(dev);
-      dev->state &= ~ST_READ;
-      if (!acquire_device_for_read(jcr)) {
-         Pmsg1(-1, "%s", dev->errmsg);
-        goto bail_out;
+      if (autochanger != 1) {
+         dev->close();
+         get_cmd(_("Mount first tape. Press enter when ready: "));

       }
    }
       }
    }

+
+   dev->close();
+   dev->num_writers = 0;
+   if (!acquire_device_for_read(dcr)) {
+      Pmsg1(-1, "%s", dev->errmsg);
+      goto bail_out;
+   }

    /*
     * We now have the first tape mounted.
    /*
     * We now have the first tape mounted.

-    * Note, re-reading last block may have caused us to 
-    *  loose track of where we are (block number unknown).
+    * Note, re-reading last block may have caused us to
+    *   loose track of where we are (block number unknown).

     */
     */

-   rewind_dev(dev);                  /* get to a known place on tape */
-   /* Read the first 1000 records */
-   Pmsg0(-1, _("Reading the first 1000 records.\n"));
+   Pmsg0(-1, _("Rewinding.\n"));
+   if (!dev->rewind(dcr)) {                /* get to a known place on tape */
+      goto bail_out;
+   }
+   /* Read the first 10000 records */
+   Pmsg2(-1, _("Reading the first 10000 records from %u:%u.\n"),
+      dev->file, dev->block_num);
+   quickie_count = 0;

    read_records(dcr, quickie_cb, my_mount_next_read_volume);
    Pmsg4(-1, _("Reposition from %u:%u to %u:%u\n"), dev->file, dev->block_num,
    read_records(dcr, quickie_cb, my_mount_next_read_volume);
    Pmsg4(-1, _("Reposition from %u:%u to %u:%u\n"), dev->file, dev->block_num,

-        last_file, last_block_num);
-   if (!reposition_dev(dev, last_file, last_block_num)) {
-      Pmsg1(-1, "Reposition error. ERR=%s\n", strerror_dev(dev));
+         last_file, last_block_num);
+   if (!dev->reposition(dcr, last_file, last_block_num)) {
+      Pmsg1(-1, _("Reposition error. ERR=%s\n"), dev->bstrerror());
+      goto bail_out;

    }
    Pmsg1(-1, _("Reading block %u.\n"), last_block_num);
    if (!read_block_from_device(dcr, NO_BLOCK_NUMBER_CHECK)) {
    }
    Pmsg1(-1, _("Reading block %u.\n"), last_block_num);
    if (!read_block_from_device(dcr, NO_BLOCK_NUMBER_CHECK)) {

-      Pmsg1(-1, _("Error reading block: ERR=%s\n"), strerror_dev(dev));
+      Pmsg1(-1, _("Error reading block: ERR=%s\n"), dev->bstrerror());

       goto bail_out;
    }
    if (compare_blocks(last_block, block)) {
       goto bail_out;
    }
    if (compare_blocks(last_block, block)) {


@@ -2062,22 +2226,20 @@ static void do_unfill()
 
    /* Multiple Volume tape */
    /* Close device so user can use autochanger if desired */
 
    /* Multiple Volume tape */
    /* Close device so user can use autochanger if desired */

-   if (dev_cap(dev, CAP_OFFLINEUNMOUNT)) {
-      offline_dev(dev);
+   if (dev->has_cap(CAP_OFFLINEUNMOUNT)) {
+      dev->offline();

    }
 
    }
 

-   free_vol_list(jcr);

    set_volume_name("TestVolume2", 2);
    set_volume_name("TestVolume2", 2);

-   jcr->bsr = NULL;
-   create_vol_list(jcr);
+

    autochanger = autoload_device(dcr, 1, NULL);
    autochanger = autoload_device(dcr, 1, NULL);

-   if (!autochanger) {
-      force_close_dev(dev);
-      get_cmd(_("Mount second tape. Press enter when ready: ")); 
+   if (autochanger != 1) {
+      dev->close();
+      get_cmd(_("Mount second tape. Press enter when ready: "));

    }
 
    }
 

-   dev->state &= ~ST_READ;
-   if (!acquire_device_for_read(jcr)) {
+   dev->clear_read();
+   if (!acquire_device_for_read(dcr)) {

       Pmsg1(-1, "%s", dev->errmsg);
       goto bail_out;
    }
       Pmsg1(-1, "%s", dev->errmsg);
       goto bail_out;
    }


@@ -2086,13 +2248,13 @@ static void do_unfill()
     * on the previous tape.
     */
    Pmsg2(-1, _("Reposition from %u:%u to 0:1\n"), dev->file, dev->block_num);
     * on the previous tape.
     */
    Pmsg2(-1, _("Reposition from %u:%u to 0:1\n"), dev->file, dev->block_num);

-   if (!reposition_dev(dev, 0, 1)) {
-      Pmsg1(-1, "Reposition error. ERR=%s\n", strerror_dev(dev));
+   if (!dev->reposition(dcr, 0, 1)) {
+      Pmsg1(-1, _("Reposition error. ERR=%s\n"), dev->bstrerror());

       goto bail_out;
    }
    Pmsg1(-1, _("Reading block %d.\n"), dev->block_num);
    if (!read_block_from_device(dcr, NO_BLOCK_NUMBER_CHECK)) {
       goto bail_out;
    }
    Pmsg1(-1, _("Reading block %d.\n"), dev->block_num);
    if (!read_block_from_device(dcr, NO_BLOCK_NUMBER_CHECK)) {

-      Pmsg1(-1, _("Error reading block: ERR=%s\n"), strerror_dev(dev));
+      Pmsg1(-1, _("Error reading block: ERR=%s\n"), dev->bstrerror());

       goto bail_out;
    }
    if (compare_blocks(first_block, block)) {
       goto bail_out;
    }
    if (compare_blocks(first_block, block)) {


@@ -2101,14 +2263,14 @@ static void do_unfill()
 
    /* Now find and compare the last block */
    Pmsg4(-1, _("Reposition from %u:%u to %u:%u\n"), dev->file, dev->block_num,
 
    /* Now find and compare the last block */
    Pmsg4(-1, _("Reposition from %u:%u to %u:%u\n"), dev->file, dev->block_num,

-        last_file, last_block_num);
-   if (!reposition_dev(dev, last_file, last_block_num)) {
-      Pmsg1(-1, "Reposition error. ERR=%s\n", strerror_dev(dev));
+         last_file, last_block_num);
+   if (!dev->reposition(dcr, last_file, last_block_num)) {
+      Pmsg1(-1, _("Reposition error. ERR=%s\n"), dev->bstrerror());

       goto bail_out;
    }
    Pmsg1(-1, _("Reading block %d.\n"), dev->block_num);
    if (!read_block_from_device(dcr, NO_BLOCK_NUMBER_CHECK)) {
       goto bail_out;
    }
    Pmsg1(-1, _("Reading block %d.\n"), dev->block_num);
    if (!read_block_from_device(dcr, NO_BLOCK_NUMBER_CHECK)) {

-      Pmsg1(-1, _("Error reading block: ERR=%s\n"), strerror_dev(dev));
+      Pmsg1(-1, _("Error reading block: ERR=%s\n"), dev->bstrerror());

       goto bail_out;
    }
    if (compare_blocks(last_block, block)) {
       goto bail_out;
    }
    if (compare_blocks(last_block, block)) {


@@ -2121,39 +2283,43 @@ bail_out:
    free_block(first_block);
 }
 
    free_block(first_block);
 }
 

-/* Read 1000 records then stop */
+/* Read 10000 records then stop */

 static bool quickie_cb(DCR *dcr, DEV_RECORD *rec)
 {
 static bool quickie_cb(DCR *dcr, DEV_RECORD *rec)
 {

+   DEVICE *dev = dcr->dev;

    quickie_count++;
    quickie_count++;

-   return quickie_count <= 1000;
+   if (quickie_count == 10000) {
+      Pmsg2(-1, _("10000 records read now at %d:%d\n"), dev->file, dev->block_num);
+   }
+   return quickie_count < 10000;

 }
 
 }
 

-static bool compare_blocks(DEV_BLOCK *last_block, DEV_BLOCK *block) 
+static bool compare_blocks(DEV_BLOCK *last_block, DEV_BLOCK *block)

 {
    char *p, *q;
    uint32_t CheckSum, block_len;
    ser_declare;
 
 {
    char *p, *q;
    uint32_t CheckSum, block_len;
    ser_declare;
 

-   p = last_block->buf;      
+   p = last_block->buf;

    q = block->buf;
    unser_begin(q, BLKHDR2_LENGTH);
    unser_uint32(CheckSum);
    unser_uint32(block_len);
    while (q < (block->buf+block_len)) {
       if (*p == *q) {
    q = block->buf;
    unser_begin(q, BLKHDR2_LENGTH);
    unser_uint32(CheckSum);
    unser_uint32(block_len);
    while (q < (block->buf+block_len)) {
       if (*p == *q) {

-        p++;
-        q++;
-        continue;
+         p++;
+         q++;
+         continue;

       }
       Pmsg0(-1, "\n");
       dump_block(last_block, _("Last block written"));
       Pmsg0(-1, "\n");
       dump_block(block, _("Block read back"));
       }
       Pmsg0(-1, "\n");
       dump_block(last_block, _("Last block written"));
       Pmsg0(-1, "\n");
       dump_block(block, _("Block read back"));

-      Pmsg1(-1, "\n\nThe blocks differ at byte %u\n", p - last_block->buf);
-      Pmsg0(-1, "\n\n!!!! The last block written and the block\n"
+      Pmsg1(-1, _("\n\nThe blocks differ at byte %u\n"), p - last_block->buf);
+      Pmsg0(-1, _("\n\n!!!! The last block written and the block\n"

                 "that was read back differ. The test FAILED !!!!\n"
                 "This must be corrected before you use Bacula\n"
                 "that was read back differ. The test FAILED !!!!\n"
                 "This must be corrected before you use Bacula\n"

-                "to write multi-tape Volumes.!!!!\n");
+                "to write multi-tape Volumes.!!!!\n"));

       return false;
    }
    if (verbose) {
       return false;
    }
    if (verbose) {


@@ -2175,10 +2341,10 @@ static bool compare_blocks(DEV_BLOCK *last_block, DEV_BLOCK *block)
 static int flush_block(DEV_BLOCK *block, int dump)
 {
    char ec1[50];
 static int flush_block(DEV_BLOCK *block, int dump)
 {
    char ec1[50];

-   lock_device(dev);

    DEV_BLOCK *tblock;
    uint32_t this_file, this_block_num;
 
    DEV_BLOCK *tblock;
    uint32_t this_file, this_block_num;
 

+   dev->r_dlock();

    if (!this_block) {
       this_block = new_block(dev);
    }
    if (!this_block) {
       this_block = new_block(dev);
    }


@@ -2189,31 +2355,31 @@ static int flush_block(DEV_BLOCK *block, int dump)
    this_file = dev->file;
    this_block_num = dev->block_num;
    if (!write_block_to_dev(dcr)) {
    this_file = dev->file;
    this_block_num = dev->block_num;
    if (!write_block_to_dev(dcr)) {

-      Pmsg3(000, "Last block at: %u:%u this_dev_block_num=%d\n", 
-                 last_file, last_block_num, this_block_num);
+      Pmsg3(000, _("Last block at: %u:%u this_dev_block_num=%d\n"),
+                  last_file, last_block_num, this_block_num);

       if (vol_num == 1) {
       if (vol_num == 1) {

-        /* 
-         * This is 1st tape, so save first tape info separate
-         *  from second tape info 
-         */
-        last_block_num1 = last_block_num;
-        last_file1 = last_file;
-        last_block1 = dup_block(last_block);
-        last_block2 = dup_block(last_block);
-        first_block = dup_block(block); /* first block second tape */
+         /*
+          * This is 1st tape, so save first tape info separate
+          *  from second tape info
+          */
+         last_block_num1 = last_block_num;
+         last_file1 = last_file;
+         last_block1 = dup_block(last_block);
+         last_block2 = dup_block(last_block);
+         first_block = dup_block(block); /* first block second tape */

       }
       if (verbose) {
       }
       if (verbose) {

-         Pmsg3(000, "Block not written: FileIndex=%u blk_block=%u Size=%u\n", 
-           (unsigned)file_index, block->BlockNumber, block->block_len);
-         dump_block(last_block, "Last block written");
+         Pmsg3(000, _("Block not written: FileIndex=%u blk_block=%u Size=%u\n"),
+            (unsigned)file_index, block->BlockNumber, block->block_len);
+         dump_block(last_block, _("Last block written"));

          Pmsg0(-1, "\n");
          Pmsg0(-1, "\n");

-         dump_block(block, "Block not written");
+         dump_block(block, _("Block not written"));

       }
       if (stop == 0) {
       }
       if (stop == 0) {

-        eot_block = block->BlockNumber;
-        eot_block_len = block->block_len;
-        eot_FileIndex = file_index;
-        stop = 1;
+         eot_block = block->BlockNumber;
+         eot_block_len = block->block_len;
+         eot_FileIndex = file_index;
+         stop = 1;

       }
       now = time(NULL);
       now -= jcr->run_time;
       }
       now = time(NULL);
       now -= jcr->run_time;


@@ -2222,57 +2388,59 @@ static int flush_block(DEV_BLOCK *block, int dump)
       }
       kbs = (double)dev->VolCatInfo.VolCatBytes / (1000 * now);
       vol_size = dev->VolCatInfo.VolCatBytes;
       }
       kbs = (double)dev->VolCatInfo.VolCatBytes / (1000 * now);
       vol_size = dev->VolCatInfo.VolCatBytes;

-      Pmsg2(000, "End of tape. VolumeCapacity=%s. Write rate = %.1f KB/s\n", 
-        edit_uint64_with_commas(dev->VolCatInfo.VolCatBytes, ec1), kbs);
+      Pmsg4(000, _("End of tape %d:%d. VolumeCapacity=%s. Write rate = %.1f KB/s\n"),
+         dev->file, dev->block_num,
+         edit_uint64_with_commas(dev->VolCatInfo.VolCatBytes, ec1), kbs);

 
       if (simple) {
 
       if (simple) {

-        stop = -1;                   /* stop, but do simplified test */
+         stop = -1;                   /* stop, but do simplified test */

       } else {
       } else {

-        /* Full test in progress */
-        if (!fixup_device_block_write_error(jcr->dcr)) {
-            Pmsg1(000, _("Cannot fixup device error. %s\n"), strerror_dev(dev));
-           ok = false;
-           unlock_device(dev);
-           return 0;
-        }
-        BlockNumber = 0;             /* start counting for second tape */
+         /* Full test in progress */
+         if (!fixup_device_block_write_error(jcr->dcr)) {
+            Pmsg1(000, _("Cannot fixup device error. %s\n"), dev->bstrerror());
+            ok = false;
+            dev->dunlock();
+            return 0;
+         }
+         BlockNumber = 0;             /* start counting for second tape */

       }
       }

-      unlock_device(dev);
-      return 1;                      /* end of tape reached */
+      dev->dunlock();
+      return 1;                       /* end of tape reached */

    }
 
    /* Save contents after write so that the header is serialized */
    memcpy(this_block->buf, block->buf, this_block->buf_len);
 
    /*
    }
 
    /* Save contents after write so that the header is serialized */
    memcpy(this_block->buf, block->buf, this_block->buf_len);
 
    /*

-    * Toggle between two allocated blocks for efficiency.
+    * Note, we always read/write to block, but we toggle
+    *  copying it to one or another of two allocated blocks.

     * Switch blocks so that the block just successfully written is
     * Switch blocks so that the block just successfully written is

-    *  always in last_block. 
+    *  always in last_block.

     */
    tblock = last_block;
     */
    tblock = last_block;

-   last_block = this_block; 
+   last_block = this_block;

    this_block = tblock;
    last_file = this_file;
    last_block_num = this_block_num;
 
    this_block = tblock;
    last_file = this_file;
    last_block_num = this_block_num;
 

-   unlock_device(dev);
+   dev->dunlock();

    return 1;
 }
 
 
    return 1;
 }
 
 

-/* 
+/*

  * First we label the tape, then we fill
  *  it with data get a new tape and write a few blocks.
  * First we label the tape, then we fill
  *  it with data get a new tape and write a few blocks.

- */                           
+ */

 static void qfillcmd()
 {
    DEV_BLOCK *block = dcr->block;
    DEV_RECORD *rec = dcr->rec;
    int i, count;
 
 static void qfillcmd()
 {
    DEV_BLOCK *block = dcr->block;
    DEV_RECORD *rec = dcr->rec;
    int i, count;
 

-   Pmsg0(0, "Test writing blocks of 64512 bytes to tape.\n");
+   Pmsg0(0, _("Test writing blocks of 64512 bytes to tape.\n"));

 
 

-   get_cmd("How many blocks do you want to write? (1000): ");
+   get_cmd(_("How many blocks do you want to write? (1000): "));

 
    count = atoi(cmd);
    if (count <= 0) {
 
    count = atoi(cmd);
    if (count <= 0) {


@@ -2287,24 +2455,24 @@ static void qfillcmd()
    memset(rec->data, i & 0xFF, i);
    rec->data_len = i;
    rewindcmd();
    memset(rec->data, i & 0xFF, i);
    rec->data_len = i;
    rewindcmd();

-   Pmsg1(0, "Begin writing %d Bacula blocks to tape ...\n", count);
+   Pmsg1(0, _("Begin writing %d Bacula blocks to tape ...\n"), count);

    for (i=0; i < count; i++) {
       if (i % 100 == 0) {
          printf("+");
    for (i=0; i < count; i++) {
       if (i % 100 == 0) {
          printf("+");

-        fflush(stdout);
+         fflush(stdout);

       }
       if (!write_record_to_block(block, rec)) {
       }
       if (!write_record_to_block(block, rec)) {

-         Pmsg0(0, _("Error writing record to block.\n")); 
-        goto bail_out;
+         Pmsg0(0, _("Error writing record to block.\n"));
+         goto bail_out;

       }
       if (!write_block_to_dev(dcr)) {
       }
       if (!write_block_to_dev(dcr)) {

-         Pmsg0(0, _("Error writing block to device.\n")); 
-        goto bail_out;
+         Pmsg0(0, _("Error writing block to device.\n"));
+         goto bail_out;

       }
    }
    printf("\n");
    weofcmd();
       }
    }
    printf("\n");
    weofcmd();

-   if (dev_cap(dev, CAP_TWOEOF)) {
+   if (dev->has_cap(CAP_TWOEOF)) {

       weofcmd();
    }
    rewindcmd();
       weofcmd();
    }
    rewindcmd();


@@ -2335,114 +2503,68 @@ static void rawfill_cmd()
       uint32_t *p = (uint32_t *)block->buf;
       srandom(time(NULL));
       for (i=0; i<block->buf_len/sizeof(uint32_t); i++) {
       uint32_t *p = (uint32_t *)block->buf;
       srandom(time(NULL));
       for (i=0; i<block->buf_len/sizeof(uint32_t); i++) {

-        p[i] = random();
+         p[i] = random();

       }
    }
    p = (uint32_t *)block->buf;
       }
    }
    p = (uint32_t *)block->buf;

-   Pmsg1(0, "Begin writing raw blocks of %u bytes.\n", block->buf_len);
+   Pmsg1(0, _("Begin writing raw blocks of %u bytes.\n"), block->buf_len);

    for ( ;; ) {
       *p = block_num;
    for ( ;; ) {
       *p = block_num;

-      stat = write(dev->fd, block->buf, block->buf_len);
+      stat = dev->d_write(dev->fd(), block->buf, block->buf_len);

       if (stat == (int)block->buf_len) {
       if (stat == (int)block->buf_len) {

-        if ((block_num++ % 100) == 0) {
+         if ((block_num++ % 100) == 0) {

             printf("+");
             printf("+");

-           fflush(stdout);
-        }
-        p[0] += p[13];
-        for (i=1; i<(block->buf_len-sizeof(uint32_t))/sizeof(uint32_t)-1; i++) {
-           p[i] += p[i-1];
-        }
-        continue;
+            fflush(stdout);
+         }
+         p[0] += p[13];
+         for (i=1; i<(block->buf_len-sizeof(uint32_t))/sizeof(uint32_t)-1; i++) {
+            p[i] += p[i-1];
+         }
+         continue;

       }
       break;
    }
    my_errno = errno;
    printf("\n");
       }
       break;
    }
    my_errno = errno;
    printf("\n");

-   printf("Write failed at block %u. stat=%d ERR=%s\n", block_num, stat,
-      strerror(my_errno));
+   berrno be;
+   printf(_("Write failed at block %u. stat=%d ERR=%s\n"), block_num, stat,
+      be.bstrerror(my_errno));

    weofcmd();
 }
 
 
    weofcmd();
 }
 
 

-/*
- * Fill a tape using raw write() command
- */
-static void bfill_cmd()
-{
-   DEV_BLOCK *block = dcr->block;
-   uint32_t block_num = 0;
-   uint32_t *p;
-   int my_errno;
-   int fd;   
-   uint32_t i;
-
-   fd = open("/dev/urandom", O_RDONLY);
-   if (fd) {
-      read(fd, block->buf, block->buf_len);
-      close(fd);
-   } else {
-      uint32_t *p = (uint32_t *)block->buf;
-      srandom(time(NULL));
-      for (i=0; i<block->buf_len/sizeof(uint32_t); i++) {
-        p[i] = random();
-      }
-   }
-   p = (uint32_t *)block->buf;
-   Pmsg1(0, "Begin writing Bacula blocks of %u bytes.\n", block->buf_len);
-   for ( ;; ) {
-      *p = block_num;
-      block->binbuf = block->buf_len;
-      block->bufp = block->buf + block->binbuf;
-      if (!write_block_to_dev(dcr)) {
-        break;
-      }
-      if ((block_num++ % 100) == 0) {
-         printf("+");
-        fflush(stdout);
-      }
-      p[0] += p[13];
-      for (i=1; i<(block->buf_len/sizeof(uint32_t)-1); i++) {
-        p[i] += p[i-1];
-      }
-   }
-   my_errno = errno;
-   printf("\n");
-   printf("Write failed at block %u.\n", block_num);     
-   weofcmd();
-}
-

 
 

-struct cmdstruct { const char *key; void (*func)(); const char *help; }; 
+struct cmdstruct { const char *key; void (*func)(); const char *help; };

 static struct cmdstruct commands[] = {
 static struct cmdstruct commands[] = {

- {"autochanger", autochangercmd, "test autochanger"},
- {"bsf",        bsfcmd,       "backspace file"},
- {"bsr",        bsrcmd,       "backspace record"},
- {"bfill",      bfill_cmd,    "fill tape using Bacula writes"},
- {"cap",        capcmd,       "list device capabilities"},
- {"clear",      clearcmd,     "clear tape errors"},
- {"eod",        eodcmd,       "go to end of Bacula data for append"},
- {"eom",        eomcmd,       "go to the physical end of medium"},
- {"fill",       fillcmd,      "fill tape, write onto second volume"},
- {"unfill",     unfillcmd,    "read filled tape"},
- {"fsf",        fsfcmd,       "forward space a file"},
- {"fsr",        fsrcmd,       "forward space a record"},
- {"help",       helpcmd,      "print this command"},
- {"label",      labelcmd,     "write a Bacula label to the tape"},
- {"load",       loadcmd,      "load a tape"},
- {"quit",       quitcmd,      "quit btape"},   
- {"rawfill",    rawfill_cmd,  "use write() to fill tape"},
- {"readlabel",  readlabelcmd, "read and print the Bacula tape label"},
- {"rectest",    rectestcmd,   "test record handling functions"},
- {"rewind",     rewindcmd,    "rewind the tape"},
- {"scan",       scancmd,      "read() tape block by block to EOT and report"}, 
- {"scanblocks", scan_blocks,  "Bacula read block by block to EOT and report"},
- {"status",     statcmd,      "print tape status"},
- {"test",       testcmd,      "General test Bacula tape functions"},
- {"weof",       weofcmd,      "write an EOF on the tape"},
- {"wr",         wrcmd,        "write a single Bacula block"}, 
- {"rr",         rrcmd,        "read a single record"},
- {"qfill",      qfillcmd,     "quick fill command"},
-            };
+ {NT_("autochanger"),autochangercmd, _("test autochanger")},
+ {NT_("bsf"),       bsfcmd,       _("backspace file")},
+ {NT_("bsr"),       bsrcmd,       _("backspace record")},
+ {NT_("cap"),       capcmd,       _("list device capabilities")},
+ {NT_("clear"),     clearcmd,     _("clear tape errors")},
+ {NT_("eod"),       eodcmd,       _("go to end of Bacula data for append")},
+ {NT_("eom"),       eomcmd,       _("go to the physical end of medium")},
+ {NT_("fill"),      fillcmd,      _("fill tape, write onto second volume")},
+ {NT_("unfill"),    unfillcmd,    _("read filled tape")},
+ {NT_("fsf"),       fsfcmd,       _("forward space a file")},
+ {NT_("fsr"),       fsrcmd,       _("forward space a record")},
+ {NT_("help"),      helpcmd,      _("print this command")},
+ {NT_("label"),     labelcmd,     _("write a Bacula label to the tape")},
+ {NT_("load"),      loadcmd,      _("load a tape")},
+ {NT_("quit"),      quitcmd,      _("quit btape")},
+ {NT_("rawfill"),   rawfill_cmd,  _("use write() to fill tape")},
+ {NT_("readlabel"), readlabelcmd, _("read and print the Bacula tape label")},
+ {NT_("rectest"),   rectestcmd,   _("test record handling functions")},
+ {NT_("rewind"),    rewindcmd,    _("rewind the tape")},
+ {NT_("scan"),      scancmd,      _("read() tape block by block to EOT and report")},
+ {NT_("scanblocks"),scan_blocks,  _("Bacula read block by block to EOT and report")},
+ {NT_("status"),    statcmd,      _("print tape status")},
+ {NT_("test"),      testcmd,      _("General test Bacula tape functions")},
+ {NT_("weof"),      weofcmd,      _("write an EOF on the tape")},
+ {NT_("wr"),        wrcmd,        _("write a single Bacula block")},
+ {NT_("rr"),        rrcmd,        _("read a single record")},
+ {NT_("rb"),        rbcmd,        _("read a single Bacula block")},
+ {NT_("qfill"),     qfillcmd,     _("quick fill command")}
+             };

 #define comsize (sizeof(commands)/sizeof(struct cmdstruct))
 
 static void
 #define comsize (sizeof(commands)/sizeof(struct cmdstruct))
 
 static void


@@ -2451,20 +2573,19 @@ do_tape_cmds()
    unsigned int i;
    bool found;
 
    unsigned int i;
    bool found;
 

-   while (get_cmd("*")) {
+   while (!quit && get_cmd("*")) {

       sm_check(__FILE__, __LINE__, false);
       found = false;
       parse_args(cmd, &args, &argc, argk, argv, MAX_CMD_ARGS);
       for (i=0; i<comsize; i++)       /* search for command */
       sm_check(__FILE__, __LINE__, false);
       found = false;
       parse_args(cmd, &args, &argc, argk, argv, MAX_CMD_ARGS);
       for (i=0; i<comsize; i++)       /* search for command */

-        if (argc > 0 && fstrsch(argk[0],  commands[i].key)) {
-           (*commands[i].func)();    /* go execute command */
-           found = true;
-           break;
-        }
-      if (!found)
-         Pmsg1(0, _("%s is an illegal command\n"), cmd);
-      if (quit)
-        break;
+         if (argc > 0 && fstrsch(argk[0],  commands[i].key)) {
+            (*commands[i].func)();    /* go execute command */
+            found = true;
+            break;
+         }
+      if (!found) {
+         Pmsg1(0, _("\"%s\" is an invalid command\n"), cmd);
+      }

    }
 }
 
    }
 }
 


@@ -2482,26 +2603,27 @@ static void helpcmd()
 static void usage()
 {
    fprintf(stderr, _(
 static void usage()
 {
    fprintf(stderr, _(

-"Copyright (C) 2000-2004 Kern Sibbald and John Walker.\n"
-"\nVersion: " VERSION " (" BDATE ")\n\n"
+PROG_COPYRIGHT
+"\nVersion: %s (%s)\n\n"

 "Usage: btape <options> <device_name>\n"
 "       -b <file>   specify bootstrap file\n"
 "       -c <file>   set configuration file to file\n"
 "Usage: btape <options> <device_name>\n"
 "       -b <file>   specify bootstrap file\n"
 "       -c <file>   set configuration file to file\n"

-"       -d <nn>     set debug level to nn\n"
+"       -d <nn>     set debug level to <nn>\n"
+"       -dt         print timestamp in debug output\n"

 "       -p          proceed inspite of I/O errors\n"
 "       -s          turn off signals\n"
 "       -v          be verbose\n"
 "       -p          proceed inspite of I/O errors\n"
 "       -s          turn off signals\n"
 "       -v          be verbose\n"

-"       -?          print this message.\n"  
-"\n"));
+"       -?          print this message.\n"
+"\n"), 2000, VERSION, BDATE);

 
 }
 
 
 }
 

-/*     
+/*

  * Get next input command from terminal.  This
  * routine is REALLY primitive, and should be enhanced
  * to have correct backspacing, etc.
  */
  * Get next input command from terminal.  This
  * routine is REALLY primitive, and should be enhanced
  * to have correct backspacing, etc.
  */

-int 
+int

 get_cmd(const char *prompt)
 {
    int i = 0;
 get_cmd(const char *prompt)
 {
    int i = 0;


@@ -2512,16 +2634,16 @@ get_cmd(const char *prompt)
     * up a bit.
     */
    cmd[i] = 0;
     * up a bit.
     */
    cmd[i] = 0;

-   while ((ch = fgetc(stdin)) != EOF) { 
+   while ((ch = fgetc(stdin)) != EOF) {

       if (ch == '\n') {
       if (ch == '\n') {

-        strip_trailing_junk(cmd);
-        return 1;
+         strip_trailing_junk(cmd);
+         return 1;

       } else if (ch == 4 || ch == 0xd3 || ch == 0x8) {
       } else if (ch == 4 || ch == 0xd3 || ch == 0x8) {

-        if (i > 0)
-           cmd[--i] = 0;
-        continue;
-      } 
-        
+         if (i > 0)
+            cmd[--i] = 0;
+         continue;
+      }
+

       cmd[i++] = ch;
       cmd[i] = 0;
    }
       cmd[i++] = ch;
       cmd[i] = 0;
    }


@@ -2530,16 +2652,16 @@ get_cmd(const char *prompt)
 }
 
 /* Dummies to replace askdir.c */
 }
 
 /* Dummies to replace askdir.c */

-bool   dir_update_file_attributes(DCR *dcr, DEV_RECORD *rec) { return 1;}
-bool   dir_send_job_status(JCR *jcr) {return 1;}
+bool    dir_update_file_attributes(DCR *dcr, DEV_RECORD *rec) { return 1;}
+bool    dir_send_job_status(JCR *jcr) {return 1;}

 
 

-bool dir_update_volume_info(DCR *dcr, bool relabel) 
-{ 
+bool dir_update_volume_info(DCR *dcr, bool relabel, bool update_LastWritten)
+{

    return 1;
 }
 
 
    return 1;
 }
 
 

-bool dir_get_volume_info(DCR *dcr, enum get_vol_info_rw  writing)            
+bool dir_get_volume_info(DCR *dcr, enum get_vol_info_rw  writing)

 {
    Dmsg0(20, "Enter dir_get_volume_info\n");
    bstrncpy(dcr->VolCatInfo.VolCatName, dcr->VolumeName, sizeof(dcr->VolCatInfo.VolCatName));
 {
    Dmsg0(20, "Enter dir_get_volume_info\n");
    bstrncpy(dcr->VolCatInfo.VolCatName, dcr->VolumeName, sizeof(dcr->VolCatInfo.VolCatName));


@@ -2553,39 +2675,35 @@ bool dir_create_jobmedia_record(DCR *dcr)
 }
 
 
 }
 
 

-bool dir_find_next_appendable_volume(DCR *dcr) 
-{ 
+bool dir_find_next_appendable_volume(DCR *dcr)
+{

    Dmsg1(20, "Enter dir_find_next_appendable_volume. stop=%d\n", stop);
    return dcr->VolumeName[0] != 0;
 }
 
    Dmsg1(20, "Enter dir_find_next_appendable_volume. stop=%d\n", stop);
    return dcr->VolumeName[0] != 0;
 }
 

-bool dir_ask_sysop_to_mount_volume(DCR *dcr)
+bool dir_ask_sysop_to_mount_volume(DCR *dcr, int /* mode */)

 {
    DEVICE *dev = dcr->dev;
    Dmsg0(20, "Enter dir_ask_sysop_to_mount_volume\n");
    if (dcr->VolumeName[0] == 0) {
       return dir_ask_sysop_to_create_appendable_volume(dcr);
    }
 {
    DEVICE *dev = dcr->dev;
    Dmsg0(20, "Enter dir_ask_sysop_to_mount_volume\n");
    if (dcr->VolumeName[0] == 0) {
       return dir_ask_sysop_to_create_appendable_volume(dcr);
    }

-   /* Close device so user can use autochanger if desired */
-   if (dev_cap(dev, CAP_OFFLINEUNMOUNT)) {
-      offline_dev(dev);
-   }
-   force_close_dev(dev);

    Pmsg1(-1, "%s", dev->errmsg);           /* print reason */
    if (dcr->VolumeName[0] == 0 || strcmp(dcr->VolumeName, "TestVolume2") == 0) {
    Pmsg1(-1, "%s", dev->errmsg);           /* print reason */
    if (dcr->VolumeName[0] == 0 || strcmp(dcr->VolumeName, "TestVolume2") == 0) {

-      fprintf(stderr, "Mount second Volume on device %s and press return when ready: ",
-        dev_name(dev));
+      fprintf(stderr, _("Mount second Volume on device %s and press return when ready: "),
+         dev->print_name());

    } else {
    } else {

-      fprintf(stderr, "Mount Volume \"%s\" on device %s and press return when ready: ",
-        dcr->VolumeName, dev_name(dev));
+      fprintf(stderr, _("Mount Volume \"%s\" on device %s and press return when ready: "),
+         dcr->VolumeName, dev->print_name());

    }
    }

-   getchar();  
+   dev->close();
+   getchar();

    return true;
 }
 
 bool dir_ask_sysop_to_create_appendable_volume(DCR *dcr)
 {
    return true;
 }
 
 bool dir_ask_sysop_to_create_appendable_volume(DCR *dcr)
 {

-   bool autochanger;
+   int autochanger;

    DEVICE *dev = dcr->dev;
    Dmsg0(20, "Enter dir_ask_sysop_to_create_appendable_volume\n");
    if (stop == 0) {
    DEVICE *dev = dcr->dev;
    Dmsg0(20, "Enter dir_ask_sysop_to_create_appendable_volume\n");
    if (stop == 0) {


@@ -2594,17 +2712,16 @@ bool dir_ask_sysop_to_create_appendable_volume(DCR *dcr)
       set_volume_name("TestVolume2", 2);
    }
    /* Close device so user can use autochanger if desired */
       set_volume_name("TestVolume2", 2);
    }
    /* Close device so user can use autochanger if desired */

-   if (dev_cap(dev, CAP_OFFLINEUNMOUNT)) {
-      offline_dev(dev);
+   if (dev->has_cap(CAP_OFFLINEUNMOUNT)) {
+      dev->offline();

    }
    autochanger = autoload_device(dcr, 1, NULL);
    }
    autochanger = autoload_device(dcr, 1, NULL);

-   if (!autochanger) {
-      force_close_dev(dev);
-      fprintf(stderr, "Mount blank Volume on device %s and press return when ready: ",
-        dev_name(dev));
-      getchar();   
+   if (autochanger != 1) {
+      fprintf(stderr, _("Mount blank Volume on device %s and press return when ready: "),
+         dev->print_name());
+      dev->close();
+      getchar();

    }
    }

-   open_device(dcr);

    labelcmd();
    VolumeName = NULL;
    BlockNumber = 0;
    labelcmd();
    VolumeName = NULL;
    BlockNumber = 0;


@@ -2618,8 +2735,10 @@ static bool my_mount_next_read_volume(DCR *dcr)
    DEV_BLOCK *block = dcr->block;
 
    Dmsg0(20, "Enter my_mount_next_read_volume\n");
    DEV_BLOCK *block = dcr->block;
 
    Dmsg0(20, "Enter my_mount_next_read_volume\n");

-   Pmsg1(000, "End of Volume \"%s\"\n", dcr->VolumeName);
+   Pmsg2(000, _("End of Volume \"%s\" %d records.\n"), dcr->VolumeName,
+      quickie_count);

 
 

+   volume_unused(dcr);             /* release current volume */

    if (LastBlock != block->BlockNumber) {
       VolBytes += block->block_len;
    }
    if (LastBlock != block->BlockNumber) {
       VolBytes += block->block_len;
    }


@@ -2630,28 +2749,25 @@ static bool my_mount_next_read_volume(DCR *dcr)
       now = 1;
    }
    kbs = (double)VolBytes / (1000.0 * (double)now);
       now = 1;
    }
    kbs = (double)VolBytes / (1000.0 * (double)now);

-   Pmsg3(-1, "Read block=%u, VolBytes=%s rate=%.1f KB/s\n", block->BlockNumber,
-           edit_uint64_with_commas(VolBytes, ec1), (float)kbs);
+   Pmsg3(-1, _("Read block=%u, VolBytes=%s rate=%.1f KB/s\n"), block->BlockNumber,
+            edit_uint64_with_commas(VolBytes, ec1), (float)kbs);

 
    if (strcmp(dcr->VolumeName, "TestVolume2") == 0) {
       end_of_tape = 1;
       return false;
    }
 
 
    if (strcmp(dcr->VolumeName, "TestVolume2") == 0) {
       end_of_tape = 1;
       return false;
    }
 

-   free_vol_list(jcr);

    set_volume_name("TestVolume2", 2);
    set_volume_name("TestVolume2", 2);

-   jcr->bsr = NULL;
-   create_vol_list(jcr);
-   close_dev(dev);
-   dev->state &= ~ST_READ; 
-   if (!acquire_device_for_read(jcr)) {
-      Pmsg2(0, "Cannot open Dev=%s, Vol=%s\n", dev_name(dev), dcr->VolumeName);
+
+   dev->close();
+   if (!acquire_device_for_read(dcr)) {
+      Pmsg2(0, _("Cannot open Dev=%s, Vol=%s\n"), dev->print_name(), dcr->VolumeName);

       return false;
    }
       return false;
    }

-   return true;                   /* next volume mounted */
+   return true;                    /* next volume mounted */

 }
 
 }
 

-static void set_volume_name(const char *VolName, int volnum) 
+static void set_volume_name(const char *VolName, int volnum)

 {
    DCR *dcr = jcr->dcr;
    VolumeName = VolName;
 {
    DCR *dcr = jcr->dcr;
    VolumeName = VolName;


@@ -2660,4 +2776,5 @@ static void set_volume_name(const char *VolName, int volnum)
    bstrncpy(dcr->VolCatInfo.VolCatName, VolName, sizeof(dcr->VolCatInfo.VolCatName));
    bstrncpy(dcr->VolumeName, VolName, sizeof(dcr->VolumeName));
    dcr->VolCatInfo.Slot = volnum;
    bstrncpy(dcr->VolCatInfo.VolCatName, VolName, sizeof(dcr->VolCatInfo.VolCatName));
    bstrncpy(dcr->VolumeName, VolName, sizeof(dcr->VolumeName));
    dcr->VolCatInfo.Slot = volnum;

+   dcr->VolCatInfo.InChanger = true;

 }
 }