+
+03Feb04
+- Correct problems with jobs scheduled at a later time by hand.
+ Missing unlock(), backward test on pthread_create status.
+- Fix setip crash reported by Alan Brown.
+- Create bacula.spec.in in SuSE directory from Scott.
+- Fix missing unlock() in ua_status on access denial.
+- Lots of little cleanups, improving jcr use_count debug printing.
+- Add EMSG to mem_pool utilization statistics.
+01Feb04
+- New bacula.spec.in file from Scott
+- Add Scott's spec file to the platforms/suse directory
+- Modify configure.in to make platforms/suse/bacula.spec
+- Do not allow a resource name to be specified twice.
+
+2004-01-30 Version 1.33-30Jan04 Release
+30Jan04
+- Apply Jess Guardiani's second fix to list autochanger volumes without
+ opening the drive (necessary on FreeBSD if no tape is in the drive).
+- Added Postgresql configure search libraries recommended by Alan Brown.
+29Jan04
+- Reworked the command line handler in restore to walk through the
+ arguments one at a time. This makes the file= entries work correctly.
+ Also reworked the code that takes the MediaType and finds a
+ storage device.
+26Jan04
+- I've noticed that the backups of Rufus, my development machine, can be
+ "stuck" for about 12 hours, then suddenly they run. In running the
+ debugger, I see that it was stuck on the select() statement waiting
+ for the Hello. Why this happens I am not sure. I re-organized the code
+ a bit because it didn't seem to be as robust as it could, but I cannot
+ explain the problem.
+- As a consequence of the above, I have implemented a new bsock timer that
+ can be started and stopped. This is based on Nic Bellamy's new watchdog
+ code. The timer is set with start_bsock_timer(bsock, timeout); If the
+ timeout expires, the bsock will be marked as timed_out and interrupted
+ with a pthread_kill() on the current thread.
+- Added 5 minute bsock timers to all the opening Hello/authentication
+ exchanges between the various daemons.
+24Jan04
+- New spec file from Scott.
+- New patch file from Scott for create_sqlite_database
+- Fix crash in run command if invalid pool specified on the command line
+ and then the user cancels the Pool prompt.
+- Separate Console and ConsoleFont resources in gnome2 conf files.
+- Remove possibly bad ASSERTs from bnet.c
+- Remove open() of device in dircmd.c, which fails on FreeBSD with
+ an autoloader -- thanks to Jesse Guardiani for this fix.
+20Jan04
+- Remove all "hostname -s" from configure except for RedHat. Use uname -n instead.
+- Implement SetIP command.
+- Implement Close On Poll in Device resource on SD.
+- Implement Full, Inc, and Diff Pools.
+- Implement Access control lists for Consoles.
+18Jan04
+- Define default working_dir as /var/bacula/working.
+- Implement setip console command to set new IP address for a Client.
+17Jan04
+- Implement maximum network buffer size directives.
+- Good first cut at access control lists for the console.
+- Optimize restore to select only latest Differential backup after
+ the Full, and then all following Incremental backups. Previously
+ everything after Full was selected.
+16Jan04
+- Organize kernstodo a bit (more to be done).
+- Add client IP address to BSOCK structure.
+- Use bit fields where appropriate in BSOCK structure.
+- Pass UAContext to ua authenticate in Director, and make it
+ set the appropriate console (or NULL for none).
+- Tweak restore "run" argument handling and add "files" keyword.
+- Add device name or Volume name to some SD messages.
+15Jan04
+- First cut multiple consoles.
+14Jan04
+- Update kernstodo
+- Add quit command to restore tree handler.
+- Make restore tree handler remember if a hard link is present, and
+ in doing a mark, only get database entry if there is a hard link.
+ mark commands thus run at least 2 orders of magnitude faster.
+- Add files=xxx field to run command submitted for restore.
+- Add yes to restore run command if either yes or run is command line
+ argument.
+- Make "yes" on command line argument skip prompt for modification of
+ run job.
+- Add markdir and unmarkdir -- both affect only the directory in
+ question and do not do a recursive descent.
+- Make tree command automatically mark all higher level directories to
+ be restored when a directory or a file is selected. Such directories
+ are indicated by preceding the name with a + to indicate that only
+ the directory entry is selected and not the whole directory tree.
+- Modify a few tree commands to walk through all arguments rather than
+ just taking the first one.
+13Jan04
+- Update copyright date on changed files.
+- Make mark command in restore tree run *much* faster by accessing database only
+ if the file actually is hard linked -- determined at time tree it built by
+ keeping a has_link bit in the tree entry.
+12Jan04
+- Modify findlib/makepath.c to create all parent directories with full permissions.
+ This should solve the access problems on restoring files on Win32 systems.
+- Modify restore to report **** Restore Error **** if any error are found.
+ I.e. a file could not be created.
+- Change a few errors into warnings -- e.g. if permissions could not be set, but
+ the file is actually restored.
+11Jan04
+- Replace bsd_queue with dlist in lib/watchdog.c
+- Add Date: header to bsmtp. Thanks to Meno Abels (abels) on SourceForge
+ for reporting this.
+- Remove ap==NULL check in src/lib/var.c as suggested by Christoph Barbian
+ because ap (va_list) is a struct on the Alpha, so the code does not
+ compile.
+10Jan04
+- Implement first cut of polling for a Volume. New Device directive
+ "Volume Poll Interval = xxx" where xxx is a time specification
+ (e.g. 5min). Default is off.
+- Call pthread_cancel on SD msgchan only if the threadid is non-zero.
+07Jan04
+- Change RH autostart scripts to start in Dan's order.
+
+2004-01-06 Version 1.33-06Jan04 Release
+06Jan04
+- Correct calculation of week of month in scheduler and in scheduled
+ listing.
+04Jan04
+- Fix cancel of job waiting on mount to be a bit cleaner.
+03Jan04
+- Fix seg fault -- don't close db in db_open_database(). It must explicitly
+ be called.
+- Doc updates
+- Allow purge of a single JobId from a Volume (code untested)
+- Implement fix to keep SD from looping complaining about the wrong volume
+ at the end of a tape -- reported by Phil, and fix confirmed by him. I cannot
+ seem to reproduce the bug here.
+- Clean up a few more strcpy()s.
+01Jan04
+- Fix configure.in FD User print per Lars.
+- Doc update.
+- New bacula.spec.in from Scott. Nice!
+- Make RunAfterJob non-fatal if it errs since the Job has really
+ already completed the save.
+- Replace sprintf with bsnprintf in message.c
+31Dec03
+- Note, this change affects only the Win32 FD.
+- Fixed Win32 FD crash due to missing argument in status command. It
+ always crashed if there was a job that had previously run. Thanks to
+ Christopher Hull for finding and diagnosing this problem.
+29Dec03
+- Fix SELECT as indicated by Dan in sql_get.c for returning Volume names.
+- Fix last_jobs list crash for utility programs (btape, ...).
+- Correct editing of FileSet name into SQL command.
+- Allow calling watchdog stop without initialization for utility programs.
+- Enhance btape test by attempting to forward space past the end of the tape.
+- Detect CAP_FASTFSF in btape test as possible reason for failure.
+- Attempt to prevent infinite loops in fsf_dev() if device not properly
+ configured.
+- Attempt to get correct file number on tape after backspacing at EOM. The
+ correction should resolve differences in OS tape driver implementations.
+- Add ctl-c detection to bconsole. When reading from tty, interrupts any
+ output from Bacula, when reading from a file, it terminates the reading
+ and returns possibly exiting if it is a batch job.
+- Create devel_bacula.in script and make it configure itself. Very similar
+ to the new bacula.in.
+- Modify bacula.in to have separate file locations for each daemon -- makes
+ it easier to make a new devel_bacula.in when there are changes.
+- Remove old config files when rebuilding configure to avoid error msgs.
+- Fix btape "test" to respect TWO EOF.
+- Fix fsf_dev() to use system notion of file if it is valid after bsf_dev().
+- Move btraceback.gdb to scripts directory on installl.
+- Add new mandrake bacula.spec.in
+28Dec03
+- Find commonset of c_iflags that work with FreeBSD tcsetattr on terminals.
+- Remove comments from string concatenation -- doesn't work on FreeBSD
+ compiler.
+- Moderately improve bpipe_close() errors. Must rethink status return.
+- Eliminate some Emsgs in favor of Jmsgs.
+27Dec03
+- Add optional Pool keyword on restore command line. If specified, the pool
+ used will be restricted to the specified pool.
+- "Finish" implementation of JobDefs.
+- Fix directory for chmod of cats scripts.
+26Dec03
+- Implement foreach_res() #define and start replacing old code.
+- Work some more on jobdefs -- more to be done.
+- Implement bstrftime_nc() bstrftime with no century.
+- Fix static console problem in gnome2 and gnome directories reported by Alan
+ Brown.
+- Add code to test for valid Resource Names. Permitted characters are now
+ alpha, numeric, colon, period, minus, underscore, space.
+- Turnoff some unused code in timers.c
+- Start adding code to dev.c to prevent infinite loops if fast forward space
+ file (MTFSF) is configured on but not properly supported by OS.
+24Nov03
+- Sort FileSet selection list by CreateTime.
+- Add "lsmark", and "estimate" to tree routines.
+- Doing a mark or unmark now prints how many entries were changed.
+- Add command argument parsing to btape.c
+- Enhance EOT to print file:block on message.
+- Add repeat counts on btape bsf, fsf, bsr, fsr, and weof commands.
+- Enhance btape's fill command to be much clearer and more reliable.
+- Add state file to btape so that unfill command can be done any time
+ after a fill command.
+- Use reposition_dev() to position for read back of last block.
+22Nov03
+- Zap InChanger flag only if setting Slot to non-zero.
+- Added new SD directive TwoEOF, default off, that tells Bacula whether
+ to write one or two EOFs for EOM. For the OnStream driver it must
+ be off, otherwise an empty file will be created.
+- Cleaned up the btape "fill" command to compare the last block written
+ and read rather than just printing them.
+21Nov03
+- Implement btape test for autochanger.
+- Implement btape test for Fast Forward Space File.
+- Moved up to cygwin 1.5.5-1
+- Implemented Fast Forward Space File
+20Nov03
+- Add support for selecting volumes from InChanger list first, then
+ selecting from all available volumes.
+- Ensure that Volumes are selected from oldest LastWritten data/time.
+- A couple of bug fixes ensuring the proper ordering of volumes.
+19Nov03
+- Return oldest LastWritten for find_next_volume.
+- Remove ASSERT from stored/acquire.c that could trip when it shouldn't.
+- Enhance SD status if debug_level > 1 to show details of dev status.
+18Nov03
+- Create update_bacula_tables, ... scripts and modify configure and Makefiles
+- Eliminate is_num() and use is_an_integer().
+- Add user slot selection code "slots=1,2-3,5,10, ..."
+- Start daemons at level 90 rather than 20 so that MySQL will already
+ be started.
+- Write alter_mysql_tables.in and alter_sqlite_tables.in
+- Add Drive and InChanger to Media record.
+- Update database level to 7.
+- Add db_make_inchanger_unique() and call it when creating and updating
+ the Media record.
+- Add Drive and InChanger to database code for Media record.
+- Allow changing InChanger flag in update command.
+- First cut at allowing the user to specify slots for updating autochanger.
+- Add scan to "update slots scan".
+- Add command in SD to readlabel.
+15Nov03
+- In the bacula start/stop script, ordered the stop: FD SD Dir to
+ give the SD the best chances of updating the catalog before dying.
+- Add Drive and InChanger to MEDIA_DBR record and to Volume update
+ from the SD.
+- Reorganize the Volume info update from SD so that the Dir sends back the
+ current information in case the Volume status has changed by expiring.
+ The DIR-SD protocol is not backward compatible (must update).
+- Fixed the signal handler to pass the signal to the exit_handler()
+ previously it passed 1.
+- Modified SD so that on normal shutdown, it walks through all jcrs and
+ cancels them so that the Volume status will be updated in the catalog.
+- Found and fixed a bug where ST_LABEL was not set in append mode
+ (when a different tape was accepted other than the original one
+ proposed by the DIR.
+- Update the catalog Volume info after dev->file is incremented rather
+ than waiting for end of job.
+12Nov03
+- Change getdomainname() prototype for Darwin.
+- Add gethost_strerror() to create correct error message for
+ gethostbyname().
+- After doing a kill() of a stalled connection in watchdog, turn off
+ the timer to prevent an infinite loop.
+- Allow Bacula to rewrite the label on a disk volume.
+- Correct usage report printed by bsmtp.
+11Nov03
+- Complete changing references to bsmtp from smtp.
+- Add L_NONE for Admin and Restore jobs and update level_to_str()
+- Fix segfault from double free of RestoreBootstrap in job.c
+10Nov03
+- Change console to bconsole
+- Change console.conf to bconsole.conf
+- Change smtp to bsmtp
+- Implement .bconsolerc
+- Check if volume has expired when doing an update media for the SD
+09Nov03
+- Implement new code that assures that a non-zero Slot is unique within
+ a given Pool. When setting a non-zero Slot, the Slot of all other
+ Volumes with the same Slot is set to zero. Redone later to add
+ InChanger flag
+07Nov03
+- Fix bug reported by Lars where an incorrect Volume name was printed
+ by the "status dir" command.
+06Nov03
+- Pretty up a few error messages printed by smtp.
+- Make btime_t int64_t so that one can do arithmetic.
+- Implement since as utime (64 bit UTC).
+- Compute clock diff between Dir and FD, and adjust since time.
+- Apply SQL fix from Nic Bellamy (thanks).
+- Apply John's zlib #ifdefing fix.
+05Nov03
+- Add Dan's with-sd-user, ... to configure.in.
+- Add Dan's userid and group modifications to bacula.in
+- Lots of documentation updates.
+- Make console print "Enter a period to cancel a command" when starting.
+- Fix the "list nextvol" command so that it doesn't try to close the
+ database twice, giving a segfault.
+- Fix (hopefully) to dircmd.c so that a mount request does a pthread_cond_signal.
+ There was one path were the signal was not sent. This should fix the bug
+ that requires you to do two "mount" commands to free a job waiting on a mount.
+- Make dir_ask_sysop_to_mount_next_volume() return immediately if a slot is
+ specified.
+- Correct some of the messages in testfind.c (pointed out by Dan -- thanks).
+- Alias fd to client, sd to storage.
+- Changed order of Console commands so that short commands such as q (quit)
+ are more logical.
+
+2003-11-03 Version 1.32d 02Nov03 Release
+02Nov03
+- Mainly a bug fix release.
+- Do a clean of both Gnome directories.
+- Require that FileSet id match when finding an Incremental
+ previous job. This was already the case for a Full.
+- Print message if no status returned from FD.
+- Correct "Do not forget to mount the drive" message. Test was
+ backward.
+- "status dir" stopped scanning the run records on the first
+ one that matched giving an incomplete listing.
+- Edit commas in Bytes on "estimate" command output.
+
+2003-10-30 Version 1.32c 30Oct03 Release
+29Oct03
+- Add %v to job edit codes. It edits in the VolumeName(s).
+- Add code to ensure that fds 0,1, and 2 are defined by dup'ing them
+ to /dev/null if necessary. Mostly for Windows that does not have them.
+- Error check dir_create_jobmedia_record() 2 places in acquire.c
+26Oct03
+- More doc fixes.
+- Make message buffer longer for a status message that was
+ truncated.
+- Put termination on varargs calls in gnome2-console.
+- Scroll only if text sent and not for status update.
+- Add all possible Status codes the jobstatus_to_ascii()
+25Oct03
+- Add new spec file and cats patch from Scott.
+- Optimize tree.c a bit -- turn off debug code, keep node fname
+ length for fast rejection, add some statistics, allocate
+ in 100K and 1Meg chunks, use bool, uint16_t and uint8_t to
+ reduce node packet size.
+24Oct03
+- Eliminate ua_retention.c that was not used.
+- Improve error message when closing brace missing in conf file.
+- More doc updates.
+- Eliminate Don't forget to mount if it is a disk file.
+- Fix Gnome2 scrolling and blank screen problems.
+- Eliminate multiple JobIds in restore selection list.
+- Fix non-portable varargs code in var.c
+- Make doc fixes/changes suggested by Dan Languille
+23Oct03
+- Document new features.
+- Implement mod of Verify Job at the run prompt.
+- Correct SQL table definitions so that MySQL and SQLite
+ have all the values in the same position.
+- Correct a typo in configure.in when configuring GNOME.
+- In doing a "status dir" make it loop over all the run
+ commands in the Schedule rather than doing on the first one.
+- Close all unused file descriptors in bpipe.c otherwise if
+ a daemon is started, it will keep our TCP/IP port open.
+22Oct03
+- Print block read error (checksum, I/O, BB01, ...) once then
+ the number found at the end of the reading.
+- Implement RunAfterFailedJob
+- Change db_find_job_start_time() to require a Full save before
+ running an Incremental or Differential job.
+- Remove has_volume_expired from code that updates vol info
+21Oct03
+- Implement "delete job"
+20Oct03
+- More documentation, add Marc Brueckner's tips to manual.
+- Tweak gnome2-console scroll window.
+- Turn off some debug info.
+18Oct03
+- Modify Verify to accept VerifyJob = xx, where the last backup job
+ of job xxx will be verified.
+- Add changing the Pool name for a Volume to "update volume"
+- Write most of the code for Verify Disk to Catalog.
+- Recreate the src/gnome2-console directory.
+- Change all the text handling code to the Gnome 2.0 way.
+- Correct the way verify filenames are returned to the Director so
+ that directories are in canonical form (i.e. trailing /).
+- Handle casting bug in glade-2 by sed'ing support.c in gnome2-console.
+
+2003-10-15 Version 1.32b 14Oct03 Release
+14Oct03
+- Modify configure so that if threaded MySQL client library
+ is not present, Bacula will link with the non-threaded
+ version.
+- Updates to the Web pages and to the manual.
+- Remove trademark symbol from title. Phil pointed out that it
+ does not display correctly in a title.
+11Oct03
+- Implement restore by file before date.
+- Change restore arguments a bit so that you can feed it
+ multiple jobid= specifications or multiple file= specifications.
+- Pass restore with run option on to run_cmd.
+- Make run-cmd not prompt if it has a "run" on the command line.
+10Oct03
+- When pruning, select only old orphanned jobs to delete so that
+ the current job is not pruned too.
+09Oct03
+- Corrected return status for bsf_dev and bsr_dev in block.c and btape.c
+- dev.c used incorrect ruturn status for bsf_dev in the BSF at EOM
+ code. This caused all appends on FreeBSD to fail.
+- Turn on fast block rejection code.
+08Oct03
+- Optimize file index searches by adding a count to the bootstrap.
+- Write single files/blocks to bootstrap without the second part.
+- Add current Volume status to the cannot use this Volume message.
+- Zero the rx->bsr in ua_restore when freeing so it doesn't get
+ freed twice.
+- Lots of testing on the restore
+- I noticed that SD and FD bootstrap files were not always
+ deleted, so delete them as soon as possible.
+- Restore by file (or by selecting files) created some
+ horrible looking bsr files that defeated the forward
+ spacing code, so fix write_findex to work right.
+- Add zlib_strerror() routine in filed/restore in case
+ of zlib errors.
+- In filed/restore.c make sure all error returns cleanup
+ and close the open file descriptor.
+- Make sure to set *non* over filename in attr packet
+ after file is found, so error messages that print the
+ filename don't print an old, incorrect name.
+- Allow bclose() to be called after closing the file.
+- Fix a number of unclear help messages, ... reported by
+ Phil in btape.
+- Retweak stored/read_record.c so that it does forward
+ spacing at the beginning of every tape, not just the
+ first one.
+- Print repositioning message if verbose is set.
+
+2003-10-01 Version 1.32a 03Oct03 Release
+04Oct03
+- Combine the code in ua_output and ua_status that searches
+ the run records.
+03Oct03
+- Fixed "list nextvol" to search for the correct pool in the
+ Schedule Run records.
+- Correct an error in is_block_zero. It found a false
+ match if the first 1016 bytes of a 32K buffer and
+ the last 248 bytes are zero. Broke the sparse option.
+01Oct03
+- More documentation.
+- Test if multiple mail addresses works. Yes.
+- Add debug Jmsg() to trigger if the file I/O packet is
+ not closed in the FD, i.e file descriptor leaks.
+- When error occurs reading label in mount.c, start from
+ the very top so that the retry count is in effect.
+- Zap the mode in soft links in testls.c for regression
+ testing.
+
+2003-10-01 Version 1.32 30Sep03 Release
+28Sep03
+- Enhance manual faq, regression ...
+- Make FreeBSD read sizes always be a multiple of 512. Needed
+ to read raw disks.
+- Make FreeBSD accept block AND character devices for raw
+ disk reads. On FreeBSD there are no block devices.
+27Sep03
+- Fix printing of EndTime on job report after rescheduling.
+- Fix jobq.c error returns to clean up before returning.
+- Make Cleaning tape aware of "unlabeled" volumes.
+- If a job is rescheduled, ensure that old job is
+ removed from SD's jcr queue -- i.e. it is still waiting
+ for FD connection.
+- Test rescheduling code.
+- Change ./configure to detect Cygwin enviornments.
+
+2003-09-26 Version 1.32 26Sep03 Beta
+- Add regression and GUI-interface chapters to the manual.
+- Fix "label" of a volume that is already in the catalog,
+ but not yet labeled.
+- Correct the test for spooling attributes which was backward.
+ This caused the creation of a spool file in the working
+ directory for every job run.
+- Print to the job output stream when block checksum errors
+ occur, but continue processing. If more than one occurs,
+ print number at end of job.
+- Remove a few unneeded tests from configure.in
+- Modify configure to use -pthread on FreeBSD 4.8,
+ but nothing on FreeBSD 5.1
+- Clarify that bmicrosleep() takes sec and microsecs
+- Apply Franc Carter's code to specify a DB host in
+ bscan.
+- Fix sanity login length test in stored/dircmd.c
+- remove old code fro stored/job.c
+- Lots of work on regress so that it works on FreeBSD
+ and Solaris.
+- Make the default gnome-console wider (console.c)
+- Add \r to the items that terminate a token.
+
+2003-09-20 Version 1.32 20Sep03 Beta
+- Replace a number strcpy() calls with bstrncpy().
+- Added code to ensure that the names for each resource
+ type are unique. Two resources of different types can
+ have the same name.
+- More documentation
+- Added new full length modifiers for time intervals.
+ Compatible with previous method EXCEPT a modifier is now
+ manditory.
+- Completely restructured recycling. It should work now, but
+ in any case, the logic is much cleaner. A lot of new
+ code in next_vol.c
+- Added a few pthread_xx_destroy() for items inited.
+- Nic Bellamy pointed out that it wasn't necessary to do
+ destroy() of static initialized pthread variables -- fixed
+ watchdog.
+- update VolStatus asked for the media and volume twice.
+- Changed a few more strcpy() to bstrncpy().
+- Made VolBytes=1 as indicator that the Volume is labeled.
+- Modified creation of Media record to include VolBytes,
+ same for sql_update - also set LabelDate if VolBytes = 1.
+- Copy any statically linked programs to install directory.
+- Change relabel flag to label in Update_media protocol Dir<->SD.
+- Change a few strcpy to bstrncpy ...
+- Update Media record after an automatic tape label.
+- Added more debug code to bnet_server and bnet.c to attempt to
+ track down Alex's SD segfault (BSOCK==0)
+- Add additional debug cod for authentication errors in cram-md5.
+- Implement "list nextvol job=xx" and add Volume to Dir status.
+- Retry waitpid if interrupted -- needed for FreeBSD!
+- Move lex.c debug level to 900
+- Add new aliases SDAddress, ...
+- Final changes for variable expansion
+- Possible fix to Alex's SD crashes
+- Correct incrementing counters not in catalog -- reported by
+ Chris Allen.
+- Correct memory leak in core var.c code -- reported by
+ Chris Allen.
+- Make documentation of variable substitution a bit clearer.
+- Apply Nic Bellamy's patch to dbcheck.c to fix SQL to work
+ on both MySQL and SQLite.
+- Finally fixed the .messages that was sent during prompts
+ in the console with no readline.
+- Implement new Include/Exclude semantics.
+- Fix a good number of segfaults reported by Chris Allen in
+ the variable expansion code.
+- Print warning message if a job is blocked by user unmount.
+- Fix additional variable expansion problem reported by Chris Allen.
+- Fix pathconf() error status bug that caused a segfault on
+ a FreeBSD system -- reported by Gernot Hueber.
+- Make sure the console sends ".messages" only when at the
+ command line prompt.
+- Apply a patch from Nic Bellamy that corrects a file descriptor
+ leak in the Storage deamon when a job is canceled. (Thanks)
+- Implement < and | in File daemon.
+- Implement ClientRunBeforeJob and ClientRunAfterJob.
+- Corrected BSRatEOF to be BSFatEOF in btape --
+ reported by Lars Koller.
+- Documented BSFatEof
+- Eliminated save_level in FD replaced by JobLevel.
+- Increased MAX_RES_ITEMS from 35 to 50 to handle
+ new ClientRunBeforeJob ...
+- Add line number in error message for restore from file.
+- Correct editing of jobids (misplaced comma).
+- Implement restore files.
+- Quickie patch to allow Purged Volumes to be mounted.
+ Must review algorithm.
+- Eliminate a duplicated query from query.sql
+- Restructure ua_restore.c so that I can add restore files.
+- Correct positioning problem at beginning of a second volume
+ introduced with the new forward spacing code.
+- Eliminated a sprintf() in the tree routines.
+- Doc updates
+- Added HOST_OS, DISTNAME, and DISTVER to the status output.
+- Eliminated a few stray Dmsgn(000, messages making them either
+ debug_level 100, or Pmsg().
+- Made the default "Maximum File Size" 1Gbyte in SD.
+- Cache path in tree.c to reduce calls to make_tree_path
+- Documentation updates
+- Implement forward space file and block when reading a bsr.
+- Fixed a bug in db_find_next_volume() where the VolStatus was
+ not being returned.
+- Rework some of the query.sql records that were incomplete.
+- Fixed an ambigous SQL statement in restore.
+- Fix proper sorting order in restore display last 20 jobs.
+- Remove duplicate JobId's in feeding the directory tree.
+- Fix an orphaned ua buffer due to a return that should have been
+ break so that cleanup code executed.
+- Changed some strcats and sprintfs int bstrncat() ... to prevent
+ possible buffer overflows.
+- Fix max file size code on tape so that after writing EOF,
+ an appropriate jobmedia record is created.
+- Fix error messages in dev.c, which were copied into lots of
+ different subroutines without updating the text.
+- Add reposition_dev(), and make more of the return statuses of
+ dev routine standard.
+- Eliminate old semaphore and workq code. Keep only new jobq code.
+- Try to get a better default size for the gnome-console
+- Add code to avoid race conditions in starting/stoping the
+ heartbeat thread.
+- Correct potential race condition in heartbeat_stop().
+- Correct segmentation fault in mysql.c if no password given.
+- make pm_strcat and pm_strcpy return the string length
+- Use Phil's code to get the unadorned job name.
+- Move the MTIOCERRSTAT from just after a write() failure to
+ after writing the EOF marks on FreeBSD systems.
+- Enhance packet too big error in bnet.c and add some
+ ASSERTs in the send code.
+- Set heartbeat interval to zero by default.
+- Add Recycle to list of Update Volume parameters.
+- Use bget_dirmsg() wherever possible in Director.
+- Split next_volume code from catreq.c to next_vol.c
+- Consolidate editing job codes into a single routine.
+- Add Job resource name
+- Remove check for Win32 attributes in bls. It doesn't
+ need to read them, only print ls -l.
+- Add SDConnectTimeout in FD.
+- Add Scott's perlgui directory
+- Upgrade from RH7.3 to RH9. New autoconf.
+- Eliminate gnome2-console directory.
+- Correct English in status command.
+- Eliminate old shell expansion code and use BPIPE to call shell
+ with echo command.
+- Documentation as usual.
+- Add a new bacula.spec for Mandrake
+- Add ownership to alist items. Default the list owns the items.
+- Make record_cb return a status (preparation for internal use).
+- Remove all clearing of remainder in read_record.c -- not necessary
+- Write a tapetest program for FreeBSD end of tape testing.
+- Modify read.c in Bacula to use read_record.c
+- Implement multiple records in read_record.c. One for each session that
+ is open. Free the record with the EOS_LABEL is found (or at the
+ end of the scan).
+
+2003-08-02 Version 1.31a 02Aug03 Released
+- Yifang Dai reported a case where he stress tested Bacula and
+ backed up to four volumes, but only two were selected for the
+ restore. This is because I forgot that the selection could
+ span a volume entirely.
+- Added a missing CLIENT_FOUND_ROWS to the second attempt to open
+ the MySQL database -- this prevents UPDATE errors if nothing
+ actually changed.
+- Applied corrections to the manual supplied by Bob Collins. Many thanks!
+
+2003-07-30 Version 1.31 Beta 30Jul03
+- Integrated Robert Mathews improved description of Priorities into
+ the manual.
+- Chased down the "The data is not valid" bug on WinMe/98/95.
+- Found an orphaned buffer in the set_attributs part of WinMe/98/95.
+- Add sleep(1) to console when it gets a SIGTSTP signal
+ to prevent it from using 100% of the CPU.
+- Improve description of Priorities.
+- Add a bit more documentation to jobq.c
+- Complete hash table routine htable.c htable.h
+- Change M_INFO to M_ERROR in attribs.c for Windows errors.
+
+2003-07-23 Version 1.31 Beta 22Jul03
+- Apply a patch from Nic Bellamy that clarifies the error messages
+ during recycling volumes.
+- Documentation.
+- Clear VolCatInfo in askdir.c so that readbytes is zeroed.
+- Add SD statistics to backup report.
+- Removed old workq code.
+- Fixed rescheduling after error.
+- Fixed delayed starts which were not working.
+- Added priority to values that can change when starting
+ a job.
+- Complete implementation of new job scheduler. jobq.h jobq.c
+ This code is turned off unless specifically enabled in src/version.h
+- Integrate code from Nic Bellamy to check for recycled volume in
+ mount.c in SD.
+- Fix a couple of bugs in dlist.c
+- Begin implementation of new job scheduler.
+- Take serial.h provided by David Craigon, which corrects differences in
+ prototypes between serial.h and serial.c.
+- Make db_get_media_ids() return Media Ids only for the current pool.
+- Add new jobq.h and jobq.c drived from workq.
+- Add JobPriority to jcr, and Priority to Job resource as well as
+ to the run line in a Schedule.
+- Remove unused pool record from autoprune.c.
+- Implement Nic Bellamy's RecycleCurrentVolume.
+- Implement RecycleOldestVolume.
+- Begin adding new JOB_QUEUE code to the Director.
+- Create a single routine recycle_volume().
+- Retry accept(), bind() and socket() if EINTR occurs.
+- Implement insert_before(), insert_after(), and empty() for dlist class.
+ Also require offset to be given by giving item and link address.
+- Make error some messages in smtp.c a bit more explicit.
+
2003-07-12 Version 1.31 Beta 14Jul03
- Marc Brueckner reported a crash during restore (a missing tree->)
- Moved host.h.in file from filed to src.
projects / bacula / bacula / blobdiff