- Technical notes on version 1.39
+ Technical notes on version 3.0.x
General:
-28Dec06
-kes Update projects
-kes Make rescue work.
-kes Clarify Volume migration error message.
-kes Look for Job keyword when opening DB in console.
-23Dec06
-kes Add code in catreq.c to reject volumes not marked Enabled.
-kes Add a few more ACL access checks.
-kes Add \n in gnome2-console restore command so that output prints
- nicer -- i.e. lines do not run together.
-kes Fix autolabeling so that it will not mark a volume in error
- if the volume was not actually opened. This should fix bugs
- #737 and 738.
-kes Require tape drive to be open before autolabeling.
-kes Require explicit mount command on non-tapes before autolabeling.
-kes Implement an open_client_db() that searches the keywords for
- either a catolg or client, and opens the appropriate catalog.
- This makes Bacula adjust better to multiple catalogs.
-kes Use more name() methods for resources rather than hdr.name.
-22Dec06
-kes Fix code to check for two resources of same name. It forgot
- to check the last entry. Fixes bug #734.
-kes Apply scanvolume patch from Richard Mortimer that fixes bug
- #738.
-kes Apply Eric's patch for recycling the Scratch pool.
-kes Note, for the tray-monitor (or almost any restricted console_
- to work, in version 1.39.x you must add CatalogACL = catalog-name
-kes Add appropriate new #undefs to autoconf/acconfig.h so that
- configure works correctly.
-kes Implement configure code to allow the user to disable IPv6 with
- --disable-ipv6
-kes Apply Richard Mortimer's patch to prevent seg fault if mount point
- not specified -- SD refuses to start.
-kes Add magic.bacula from bug #715 to the scripts directory along with
- Arno's explanation of how to install it.
-kes Convert a bunch of hdr.name into name() method calls.
-kes Fix the code to remove .bsr files. Fixes bug #736 -- Martin.
-Version 1.39.32 released:
-20Dec06
-kes Take first catalog if gui is set, or if using dotcmd.
-kes Fix a couple of compiler warnings in wx-console
-kes Apply the immutable patch for FreeBSD hardlinked files supplied
- by Olivier Lehmann.
-kes Add Volume name to Forward spacing message.
-kes Update migration job start time (so it is not zero) to prevent
- immediate recycling of the job. This *should* fix bug #733.
-19Dec06
-ebl Fix runscript configuration parsing bug.
-17Dec06
-kes Add ENABLE_NLS (as suggested by Eric) to correct NLS problems.
- Remove NLS kludge from baconfig.h. This fixes bug #729.
-kes Allow seeking on DVD.
-kes Add additional messages when Job canceled automatically for
- max run time or max start wait exceeded. This fixes bug #621.
-kes Update maxruntime-test in regression script to properly test
- max run time -- from info given in bug #621.
-kes Simplify automatic cancel code.
-kes Add check for job_canceled() in FD when contacting SD so that if
- job is canceled from max runtime, it terminates faster.
-16Dec06
-kes Save and restore volume name in stored/mount.c fixed bug #712
- where wrong tape was requested in a mount.
-kes Implement cleaner orphan buffer dumping with buf address.
-kes Fix orphaned buffer when canceling job waiting on op intervention.
-kes Update projects file for next vote.
-kes Implement a fix (more could be done) for bug #728 where a double
- EOF is writing on the Volume when spooling is enabled and the
- connection with the FD fails (FD crash, comm error).
-kes Disable attempting to autolabel when polling and device is not
- a tape. This fixes bug #730 where polling with a removable disk
- not mounted caused lots of new Volumes to be created then marked
- in error.
-15Dec06
-kes Enable VSS by default.
+Release Version 3.0.2:
+16Jul09
+ebl Fix #1323 about a problem when mounting a requested volume
+ during a restore.
+15Jul09
+kes Add more example SD Device configurations.
+ebl Force the client_encoding to SQL_ASCII when database is already
+ using this mode.
+ebl Fix #1335 about postgresql error message during copy session
+ebl Cleanup old job records when starting the director
+ (Created/Running -> Failed)
+14Jul09
+kes Apply patch in bug #1315 by McMichaeli that fixes scripts/logwatch
+kes Add more output when spooling and no space left
+ebl Fix postgresql driver bug that displayed <NULL> rows from time to time.
+ebl Implement the project 'restore' menu: enter a JobId, automatically
+ select dependents
+ebl Should fix #1323 about verify accurate jobs and deleted files.
+13Jul09
+kes Send bootstrap directly from DIR to SD
+kes Create build scripts for Win64 somewhat equilavent to the Win32 ones.
+10Jul09
+ebl Print correct JobId in bls, should fix #1331
+kes Apply python detect patch from Bastian Friedrich <bastian.friedrich@collax.com>
+09Jul09
+kes Add --with-hostname to ./configure
+mvw Changed ACL_OTHER into ACL_OTHER_OBJ as IRIX doesn't seem to have
+ ACL_OTHER. Fixes bug #1333
+03Jul09
+ebl Should fix the first part #1323 about the restore option
+ 'List Jobs where a given File is saved' wich display deleted files
+02Jul09
+ebl Make estimate command accurate compatible. Should fix #1318
+ebl Add estimate accurate=yes/no
+01Jul09
+kes Fix bug #1317 Allow duplicate jobs = no does not work
+28Jun09
+mvw Fix missing case for NetBSD xattr restores.
+25Jun09
+kes Modify xattr.c and acl.c not to fail the job on errors. This should
+ fix bug #1305.
+23Jun09
+mvw Fix 2 rather big bugs in the xattr and acl code and fix a small
+ memory leak on a particular code path for Linux xattr/acl handling.
+ebl Update FileSetId when initializing job.
+ebl Add '*' when volume is online when displaying volume list in restore.
+ Should complete project 31.
+21Jun09
+kes Re-fix bug #1311 if MaxDiffInterval exceeded ensure job upgraded
+17Jun09
+kes Fix bug #1305 make errors obtaining acl during backup non-fatal
+kes Fix bug #1309 inappropriate error message during btape fill command
+kes Fix bug #1307 AllowHigherDuplicates=no prevents automatic job escalation
+12Jun09
+kes Remove non-portable code referencing pthread_t fixes bug #1308.
+kes Create patch that may fix bug #1298 and bug #1304, which causes
+ an SD crash after canceling a job.
+08Jun09
+kes Attempt to get bat conf file installation to work with DESTDIR
+05uun09
+kes Improve error messages when a migration sql query is used and correct
+ the problem identified in bug #1303 with starting Job names
+ containing spaces.
+ebl Fix #1306 about a problem when building the static bconsole
+26May09
+ebl Apply Steve Polyack patch to add DirSourceAddress and FDSourceAddress
+ directives. That permits to choose the outgoing interface.
+25May09
+mvw Allow acl and xattr to be explicitly enabled and fail the configure
+ if we are asked to enable acl or xattr support and the OS doesn't support
+ acls or xattrs.
+23May09
+kes Create Client record in database at startup -- makes bat work better.
+kes When doing a tree selection restore, look at the PurgedFiles column
+ in the first JobId, and if non-zero, the Job was purged, so do
+ not do selection.
+21May09
+kes Add Catalog = all to the default Messages resource.
+19May09
+ebl Fix #1029 about IPV6/IPV4 address resolution order with help
+ of David Steinn Geirsson.
+kes During jcr destruction hold jcr_chain lock only for minimum
+ time necessary. This should fix the SD deadlock in bug #1287.
+18May09
+kes Simplify messages printed by SD when reserve fails. This
+ should fix bug #1285.
+14May09
+kes Apply fix to sql_cmds.c suggested by
+ Ulrich Leodolter <ulrich.leodolter at obvsg.at>
+ which prevents restore by file selection from using
+ Copy jobs.
+kes Add new nagios_plugin_check_bacula.tgz from
+ Masopust, Christian <christian.masopust at siemens.com>
+kes Add bconsole @help command
+kes Fix Show FileSet command to handle spaces
+04May09
+kes Add --with-bsrdir and --with-logdir for placement of Bacula bsr
+ files and Bacula log files.
-Version 1.39.30 released:
-14Dec06
-kes Complete hopefully the last of the copyright transfer changes.
-kes Separate NumVolumes in SD to NumReadVolumes and NumWrite volumes so
- that migration writing to multiple volumes doesn't mess up reading
- Volumes. This should fix bug #720 -- multivol migration fails.
-kes Make migration SQL look only for Type='B' jobs to migrate. This should
- fix bug #724 jobs getting migrated twice.
-kes Convert remaining dev_cap(dev, ...) to use dev->has_cap().
-kes Implement dev->clear_cap() and dev->set_cap() methods.
-kes Turn off disk seeking on restore for DVDs since I am not 100%
- sure it works.
-13Dec06
-kes Implement code that should properly set that a job was migrated,
- if the migration was successful even if there were no file to
- migrate.
-kes Apply Richard's patch to fix building or filed/restore.c without
- OpenSSL support.
-kes Ensure that at least one block is written by the SD even if the
- FD dies or fails -- should fix bug #728.
-kes Convert stored/record.c ASSERT into a soft fail if the length of
- a record is too insanely long. This should fix bug #???
-12Dec06
-kes Fix automatic labeling of File volumes, which was broken by new
- removable device code.
-10Dec06
-kes Remove typedef uLong for HP in baconfig.h. It broke things.
-lf Fix job byte reporting -- the digest code runs in verify.c and
- increases this value. The better solution is to digest the
- stream as we receive it, thus removing the need to re-read
- from disk at all, but that requires more extensive and
- potentially destabilizing changes.
-lf This commit fixes backup and restore of HFS+ resource forks.
-lf Add a long-missing 'break' statement in HFS+ attribute
- handling that resulted in restore failures.
-09Dec06
-ebl Fix runscript to always execute command after all job type.
+
+Release Version 3.0.1:
+29Apr09
+kes Fix bug #1282 Setting job.Priority in python crashes director by
+ checking if string addr is NULL. Not tested.
+kes Fix bug #1281 allow all on restore command line to restore
+ pruned JobIds without prompting.
+28Apr09
+dirk Correct bat Select dialog. Fixes bug #1276.
+kes Check for job_canceled() in fd_plugin code.
+kes Update Win32 table creation to have new DB version 11 format
+kes Remove illegal Options in Exclude of default Win32/64 bacula-dir.conf
+27Apr09
+ebl Fix bug #1274 where a migration job can be canceled like the
+ original job by the MaxRunTime directive.
+mvw Added fix for bug #1275 where acl or xattr data is saved for
+ virtual filenames generated by filed plugins.
+26Apr09
+ebl Remove "Reposition" message when restoring
+kes Fix platform scripts not to clean configured files during
+ 'make clean' use 'make distclean' to clean everything. Fixes
+ bug #1272.
+kes Update projects file
+21Apr09
+ebl Tweak version string to display versionid field at the end
+ and keep fields order.
+16Apr09
+kes Add additional mysql connection debug code submitted by:
+ Chandranshu <chandranshu@gmail.com>
+14Apr09
+kes Fix bug #1246 Sometimes access denied with VSS enabled. UCS
+ conversion cache was not properly flushed at the end of a Job.
+kes Fix bug #1268 Full Max Run Time cancels jobs (when Max Run Time = 0).
+11Apr09
+kes Modify insertion of read Volumes in SD to be done before the
+ drive reservation. This ensures that a Volume to be read will not
+ be reserved for writing. Significant enhancement.
-Version 1.39.30 released:
-08Dec06
-kes Mark build-depkgs-mingw3 executable in configure process.
-kes Update autoconf/config.h.in to include LOCALEDIR
-kes Undefine NLS settings for wxWidgets as there is a conflict with
- their way of doing things.
-kes Implement a rpool and rpool_source in jcr.h for Migration jobs.
-kes Change a bunch of ->hdr.name to ->name()
-kes Straighten out handling of read and write pools for Migration, including
- getting the code in the proper order.
-kes Improve migration error messages and debug output.
-kes Shorten code path in migration if nothing found to do.
-kes Implement read/write pool in migration job report.
-kes Move ua_run.c select_job_level code into a subroutine (readability).
-kes Move ua_run.c display_job_parameters into a subroutine.
-kes Do not bash dcr->VolumeName in get_volume_info() because it makes
- restore dependent on a valid catalog containing the Volume name.
-06Dec06
-kes Put make_catalog_backup SQL_BINDIR in an environment variable to
- make it easier for the user to change.
-kes Fail any backup job that tries to use encryption and sparse options.
- Hopefully this is a temporary change.
-kes Correct the EndJob return string for non-backup jobs.
-kes Review the encryption restore code.
-kes Implement a new encryption regression test with compression.
-kes Modify migrate not to fail if nothing found to migrate.
-kes Add #undef HAVE_OPENSSL, HAVE_TLS, HAVE_CYRPTO to autoconf/config.h.in
- because they were not always set correctly.
-05Dec06
-kes Update configure.in to include python 2.5 search.
-kes Back out unwanted migration change reported by Richard Mortimer.
-04Dec06
-kes Make migration with no files to migrate set normal termination.
-kes Change message when job manually started to say Job queued. ...
-kes Add job report indication of whether or not VSS and Encryption were
- used by the FD.
-kes Modify sparseBlock variable name to make the code clearer.
-kes Add more sparse tests to regress using gigaslam sparse file
- generator.
-kes Enable data encryption code.
-kes Add gigaslam.c to src/tools. It creates a 1GB file that contains
- only two blocks -- i.e. it is a real sparse file.
-03Dec06
-kes Enable disk seeking on restore.
-kes Implement the SD 'Block Positioning = yes|no' directive. This
- allows the user to turn off block level seeking, but restores
- will be much slower.
-kes Change the word illegal to read invalid in a few places.
-kes Fix Win32 build, which broke when I added parse_args_only in
- lib. I'm not sure I got the entry point right for msvc.
-kes Turn off data encryption. It can be enabled by defining
- DATA_ENCRYPTION in src/version.h and recompiling.
-kes Implement flag to turn off data encryption feature.
-kes Move unserial code in restore.c to a subroutine. Add a bit of debug
- code.
-kes Rework a bit of code in backup.c to handle sparse blocks correctly.
- The main problem was that signatures were being generated on blocks
- of zeros, which is unnecessary.
-02Dec06
-kes Fix scanner (next_arg) to handle leading double quote correctly.
-kes Modify cd command in restore tree to look at full argument without
- keywords. This fixes bug #716.
-01Dec06
-kes Do not update Migrated Job type if migration does not terminate
- normally. This fixes bug #719.
-kes Update ReleaseNotes
-kes Purge Job records from the catalog for Migration. This was
- not properly done previously. This fixes bug #718.
-28Nov06
-kes Initialize msg_type to M_INFO in migration. Pointed out by
- Robert Nelson.
-kes Add some fflush() statements for debug output. This should not
- really be necessary and defeats buffering but users continue
- to complain.
-27Nov06
-kes More copyright changes.
-kes Make sure we don't detach from the despool read device since it
- is a temporary structure where the condition variables are not
- initialized. Bug #711.
-26Nov06
-kes Add Bacula version+date to Client record. This is a very minor
- security problem in that passing the version facilitates a hacker's
- life, but it will make support easier.
-kes Implement fixes to make disk seeking work. Currently turned
- off in version.h pending reserch on what problems it will cause
- because of the previous bsnprinf() sign extension bug.
-25Nov06
-kes Add Landon's refactor of restore Feature request to the
- projects file.
-kes Tweak debug levels and messages for examining the disk
- seek problem.
-22Nov06
-kes Cleanup some of the error termination code in migration.
-kes Separate read/write source strings to keep track of where
- storage devices are used in a job.
-kes Implement a new method of keeping track of which storage
- device is used in a Job. USTORE keeps both a pointer to the
- resource and to the source string.
-kes Modify all code to use new storage set subroutines in job.c
-kes Modify migrate.c so that the definitive selection of the storage
- resource is done in the do_migration_init() routine prior to
- the job going into the job queue. This permits accurate
- deadlock detection (same read and write storage resource).
-kes Remove bfill from btape (I think it was a left over stub).
-22Nov06
-kes Make sure that the storage for a job is pulled first from
- the Pool and if not from the Job.
-kes Ensure that either the Pool or the Job specifies a Storage
- resource.
-21Nov06
-kes Start applying new FSFE copyright.
-20Nov06
-kes Add additional error messages in acquiring a drive for read.
-kes Make WritePartAfterJob the default so that the last DVD part
- always gets written to the DVD by default.
-kes Add additional error messages in migration.
-kes Suppress redundant error messages in migration (possibly more to do).
-kes Apply Martin's fix (updated to 1.39) that takes into account
- run storage overrides in the Director status display.
-kes Implement, but turn off the submitted code that sets the EOT
- model on FreeBSD machines. Turning on this code is too risky at
- this point in the development.
-19Nov06
-kes Implement unique dbid routine for migration to prevent the same
- JobId from being migrated twice. This should fix bug #709.
-18Nov06
-kes Apply Jaime Ventura's 'mail on success' patch.
-kes Add a SMALLOC_SANITY_CHECK for Arno, which aborts Bacula
- if memory usage gets too big.
-kes Tweak migration to ensure that read/write devices are different.
-17Nov06
-kes Create an AUTHORS file to list Bacula contributors.
-kes Add Richard Stallman's four GPL freedoms to LICENSE
-kes Require the conf file to have a valid NextPool for writing the
- migration output.
-16Nov06
-ebl Enable RecycleCount in catalog.
-ebl Fix "echo python | bconsole" segfault
-14Nov06
-kes Implement code to pass the MediaId to the SD. The SD then uses
- this MediaId when creating JobMedia records. This fixes a bug
- with Migration where the MediaId got set to the second Volume
- read rather than the write Volume. Possibly (unlikely) fixes
- bug #709.
-kes Remove NextPool from Job resource.
-kes Edit a few numbers in the restore dialog with commas.
-kes Note, the DIR<->SD protocol has changed.
-13Nov06
-kes Replace () by {} in configure.in for proper HP configuration.
-kes Shorten some lines over 80 characters in filed/backup.c
-kes Cast sizeof() in filed/backup.c to avoid compiler warning.
-Version 1.39.28 released:
-12Nov06
-kes Change error message 'illegal' to 'invalid' -- bug #707
-kes Add rather primitive device resource deadlock detection in
- the job queue handler. It detects the same read and write device
- for migration and cancels the job.
-kes Start adding a unique_dbid_hander() routine in migration to avoid
- duplicate mediaids and duplicate jobids.
-kes Add patch from bug #708 to permit relative paths such as ../xxx
- in the restore tree routine.
-kes Add Eric Bollengier's patch to reduce locking time in the SD after
- despooling, and thus many jobs finish faster.
-kes Correct locking order of reservations lock and device mutex in
- reserve.c -- this should correct Arno's deadlock that occurred
- when doing mount/unmount at the same time a job is reserving a
- drive.
-05Nov06
-rbn Fixed problems with encryption when combined with compression
- or sparse files. Unfortunately this means that all previous
- encrypted backups can't be restored.
-rbn Fixed problem in bfgets with Windows and Mac end of lines.
-rbn Fixed bug in Windows version of close_bpipe() that cause programs
- like bsmtp() to hang waiting for the pipe to be closed. Fixed
- binary file type problems in open_bpipe().
-rbn Fixed a number of bugs in the mysql DB scripts.
-03Nov06
-ebl Fix broken runscript on director. (RunBefore, RunAfter)
-ebl Use M_ERROR instead of M_FATAL in runscript.c
-31Oct06
-ebl Small fix src/dird/job.c to add JobErrors count to catalog.
-rbn Ignore UTF-8 marker at the start of .conf files.
-rbn Add stab2cv to 3rd party dependencies. This is a utility I
- wrote that is licensed under the GPL and available on SourceForge.
- It converts the stab debugging info generated by gcc into Codeview
- format. Currently it just translates function names to global
- symbols. This is sufficient to get reasonable stack traces from
- Dr Watson and to look at minidumps.
-rbn Fix bug # 699 - winbacula client crashes whilerunning bat scripts.
-rbn Enable Windows XP look and feel for the tray icons and wx-console.
-rbn Add Windows specific FileSet example to bacula-dir.conf.
-rbn Reorganize Start menu so that documentation and configuration are
- in subfolders.
-21Oct06
-rbn Change daemons and utilities so that if -c is omitted from the
- command line AND there is no configuration file in the current
- directory then the 'standard' configuration file (eg
- /etc/bacula/bacula-*.conf) will be used. If the argument to -c
- doesn't contain any path separators AND there is no configuration
- file by that name in the current directory then the 'standard'
- configuration file directory will be searched for a file by that
- name.
-rbn Fixed restore on Windows so that backslashes as path separators works.
-rbn Add missing query.sql file to Windows installer.
-rbn Fixed Windows versions of catalog backup scripts.
-20Oct06
-kes Fix optional files in Makefile.in of src/filed that caused
- a syntax error when using no optional files.
-15Oct06
-lf Fix a cosmetic bug in filed.c that caused spurious OpenSSL error
- messages; there is no reason to attempt to load a private key.
- from master key files.
-
-Version 1.39.26 released:
-12Oct06
-kes Apply the three patches from Richard Mortimer.
- bacula-reposition.patch, bacula-tape-reopen.patch, and
- bacula-eod.patch. This corrects tape positioning on older devices,
- and also a problem with btape.
-kes Apply fix from bug report #696 where writing to a FIFO does not
- work due to a dumb typo.
-kes Unlock the tape door before the file descriptor is released. This
- should fix lots of somewhat subtle failures when using an autochanger.
-11Oct06
-kes Correct mtx-changer bug that I introduced in a recent commit, and
- pointed out by Robert Nelson -- thanks.
-rbn Fix Windows' daemons so that messages print to stdout if not
- running as a service.
-rbn Add daemon name to trace file name (eg bacula-dir.trace).
-rbn Fix environment variable expansion in directory names on Windows.
-rbn Fix autochanger support in fill command.
-rbn Update SQL scripts to match Unix versions.
-rbn Fix daemon usage displays.
-rbn Cleanup bacula-dir.conf template.
-rbn Install openssl.cnf so that the openssl.exe installed in the
- Bacula\bin directory can be used to generate keys and
- certificates for TLS and encryption.
-rbn Fix cleanup of spool files on Windows.
-rbn Remove /silent option from daemons on Windows. The new default
- is the same as the old /silent. To enable the message boxes that
- previously were suppressed by /silent you must add /debug instead.
- NOTE: As a result of this change, the first time you upgrade from
- a previous version of 1.39.x you will receive the message
- boxes when the remove of the old services succeeds. This
- is the same behaviour as when migrating from a version prior
- to 1.39.0.
- However, going forward, these message boxes will not appear on
- upgrades or new installs.
-rbn Add new /debug option. This option enables the message boxes that
- previously were suppressed by the /silent option. In addition the
- daemons running as services will open a console window if this
- option is used.
-rbn Fix bug with service not being removed on migrated installs. This
- should correct those cases where the file daemon install was failing
- when upgrading from versions prior to 1.39.x.
-
-08Oct06
-kes Turn on heap reporting in Dir with zero debug level.
-kes Send a message to the sys log when Bacula forces a SEG FAULT, and
- send the same message to stdout.
-07Oct06
-kes Begin work on new GUI "console".
-kes Make configure look in non-standard MySQL library directory
- for Solaris.
-kes Make mtx-changer automatically configure the autochanger wait
- procedure for Solaris, FreeBSD, and Linux. Previously, only Linux
- was implemented.
-kes Correct drop_sqlite_tables.in script to not delete the database.
-kes When writing to a log file, close and reopen the file descriptor
- if there is an error writing the file.
-kes Modify the autochanger loaded?, load, and unload commands to print
- the full text of any mtx output if there is an error. Helps to
- ease diagnosis of autochanger problems.
-kes Correct a few Win32 errno returns in the VSS code so that hopefully
- a resonable Win32 error message will be printed.
-kes Convert a few strcat()... to bstrncat() in the Win32 code.
-06Oct06
-rbn Added Windows version of bsmtp.
-rbn Fixed path search for Windows so that Bacula\bin is automatically
- searched for programs and scripts.
-rbn Fixed bugs in mtx-changer.cmd and made template bacula-sd.conf
- Windows specific.
-
-Version 1.39.24 beta released:
-02Oct06
-rbn Fix restore problem with c:\ prefix bug #676.
-rbn Verify that drive letter is valid on restore.
-rbn Fix re-open() options for tape.
-kes Apply dvd find volume patch from Richard Mortimer.
-kes Eliminate the dvd specific mount routines using only the
- dev->mount/unmount.
-kes Make update_free_space a method of DEVICE and rename
- update_freespace.
-01Oct06
-kes Require a messages command acl to be able to receive messages
- in a console.
-kes Add console, system, and scan job types in util.c.
-28Sep06
-kes Print the Volume purged message only for real jobs to keep
- from cluttering up the daemon messages.
-kes Lock the tape drive door while Bacula is using the device.
-kes Add back the 'No Jobs running' message to FD and SD status because
- my regression script depends on it, and I'm too lazy to change the
- scripts.
-kes Start using structure assignments (not too happy about it ...).
-kes Fix a bug in the tools Makefile that broke on Solaris.
-kes Unload any autochanger drive during a 'release' command.
-26Sep06
-kes Enhance error message when restoring without bootstrap file.
-kes Check restored size only for regular files.
-kes Store Python job level in job record in Dir.
-kes Add back code to open tape device nonblocking, but if rewind fails
- release file descriptor.
-kes Modify acquire.c to first try autoloading the device. Also, ask operator
- to mount tape if drive cannot be opened.
-rbn Made Windows service tray status windows resizable.
-rbn Fixed horizontal scrolling of text in status window.
-rbn Preserve horizontal and vertical scroll position while
- updating. This prevents the display being reset to the
- top line every 5 seconds.
-rbn Fix Windows cross-compile compatibilty problems with
- *nix variants such as OS X without the zic command.
-rbn Eliminate dependency on man2html.
-25Sep06
-kes Update src/win32/dll/bacula.def for change in BPIPE definition for
- Win32 build.
-kes Fix a compiler warning in compat.cpp
-kes Change strcpy to bstrncpy in compat.cpp
-kes Remove some broken code in bdb_list.c
-kes Fix, hopefully the last, ACL problem in the restore command.
-kes Update the README.mingw32
-kes Add new version of upgrade-win32-client.txt to examples directory.
- Submitted by Michel Meyers.
-kes Print an INFO message in the job report when a Volume is marked Purged.
-rbn Fixed handling of external program and script execution
- so that the format of the command line is more flexible.
- Now executable path names containing spaces are translated
- to the equivalent short name automatically. The result is
- passed to cmd.exe with the quotes removed.
-24Sep06
-kes Apply the recycle patch from Richard Mortimer.
-kes Convert a few if statements in dev.c to switch statements.
-kes Start using print_errmsg instead of bstrerror().
-kes Print a job message in SD when a job is marked to be canceled.
-23Sep06
-kes All code added back. Fixed block.c read/write to loop only 3
- times. This apparently keeps the OS from crashing (at least
- most of the time).
-kes The kernel bug still persists. Backup something then immediately
- do a bscan on the same tape, and the kernel will crash.
-kes Simplifed tape open(). It no longer uses nonblocking mode, which
- means that opening with no tape loaded will probably take at least
- 6 minutes before an error is reported.
-kes Do not use MTSETDRVBUFFER if not running as root. Do a MTRESET
- when doing set_os_device_parameters.
-kes Report open error in mount.c
-kes Remove all .exe files from the installer directory on make clean.
-20Sep06
-kes Start adding back removed code.
-kes Back out a number of changes because backups to tape crash my
- system.
-kes Remove the inetd code from the File daemon.
-18Sep06
-kes Add -c option to pg_dump so that it initializes tables when
- restored.
-kes Fix FirstWritten time on Volume to be obtained from SD so that
- it is the actual time the volume was first written.
-kes Minor Makefile changes.
-kes Handle EBUSY during read(). Improve how EBUSY is handled in write().
-ebl Add yes keyword to prune/purge command
-16Sep06
-kes Correct a test in block.c that prevented restore of a DVD from
- looking at the last part in the spool directory.
-kes Make some error messages clearer mostly by using the word DVD
- in the message. Improve infor message in read_record for DVDs.
-kes Remove DVD kludges in dircmd.c label/relabel.
-kes Move the dvd relabel code from dircmd.c into
- write_new_volume_label_to_dvd() adding a relabel argument.
-kes Rewrite the truncate_dvd() code to be much simpler and
- more logical. First blow away any spool part, then create a
- new empty part and write to the DVD.
-kes Rewrite the can_write_on_non_blank_dvd() code making it
- only ensure that no valid data is on the DVD -- i.e. it
- can be overwritten.
-15Sep06
-kes Minor Makefile fixes.
-kes Put attach_dcr_to_dev in a subroutine.
-kes Make attaching/detaching to/from a device use a flag and
- only detach if actually attached.
-kes Add dvd-simulator.in to scripts directory and add to configure.
-kes Fix code in acquire.c that checks fd != 0 to use dev->is_open().
- This could be a cause of a number of drive reservation problems.
- Note, this code is now in attach_dcr_to_dev().
-kes Suppress doing Volume updates if it is a system job. This should
- prevent the DVD label blocking.
-kes Clear the freespace ok flag in a couple of strategic places.
-14Sep06
-kes Put removing zero sized spool part file in subroutine and
- call from release_device().
-kes Add Richard's patch for relabel to dircmd.c, but save and restore
- dev Volume name.
-kes Rework a lot of subroutines in dev.c to take dcr as an
- argument. This is done to eliminate the usage of attached_dcrs
- in lseek().
-kes Change truncated_dvd to blank_dvd, which seems more suitable.
-kes Apply most of Richard Mortimer's truncate patch.
-kes Create lseek() method for DEVICE that takes dcr as an
- argument. This is to eliminate the use of attached_dcrs in
- lseek(). The calls to lseek_dev() must still be changed.
-13Sep06
-kes Apply Richard Mortimer's patches for printing an error
- message in btape when a DVD is used, and to initialize traceback.
-kes Added error message to btape when trying to access a file.
-kes Move prototype of update_slots() to protos.h.
-12Sep06
-kes Add JobErrors, JobFiles, SDJobFiles, SDJobErrors, SDJobStatus,
- and FDJobStatus to the Director Python variables.
-kes Make sure valid argument passed to str_to_utime() where Arno
- had a seg fault.
-kes Apply Richard Mortimer's patch for bcopy, bextract, and bscan.
- I.e. part of two different patches.
-11Sep06
-kes Modify disk changer to simulate some of the error conditions
- of mtx-changer.
-kes Make sure the close() call in the SD tools is just before the
- getchar() call.
-kes Implement dir_get_volume_info() in bls using the patch from
- Richard Mortimer but call find_num_dvd_parts().
-kes Implement find_num_dvd_parts() that mounts and scans a DVD
- and counts the parts.
-kes Move the omode code in open_dvd() up so that the cannot
- write on blank disk can check can be bypassed for read mode.
- Not yet implemented.
-10Sep06
-kes Disable normal data spooling for DVD writing which uses
- a different spooling mechanism.
-kes Apply patch from Richard Mortimer to ensure that the number
- of DVD parts is correctly updated.
-rbn Save installer details log in the Bacula directory as
- install.log.
-rbn Add installer generation of client and storage templates
- suitable for @inclusion on the director.
-rbn Mark previously installed components for Win32 read-only since
- deselection doesn't do anything.
-
-Version 1.39.22 beta released:
-08Sep06
-kes Fix logic error in handling error return from mtx-changer
- script.
-kes Make status from SD aware of -1 (unknown) Slot status.
-kes At Eric's suggestion make both the 'slots' and 'drive' commands
- to the Storage daemon work even if the drive is busy.
-kes Make two separate Win32 menu links for starting bconsole and
- wx-console in winbacula.nsi
-kes Apply DVD part_spooled patch from Richard Mortimer
- richm@oldelvet.org.uk
-kes Put installer/Readme.txt into Win32 EOL format for Notebook.
-rbn Fixed problems migrating settings from previous releases in
- Win32 installer. Add Readme.txt with an option to show it on
- the installer Finish page.
-07Sep06
-kes Use get_catalog_resource() to open catalog database
- to ensure that ACLs are respected and that user is
- correctly prompted for database.
-kes Integrate multiple console/director patch from
- Carsten Paeth calle@calle.in-berlin.de
-ebl Add character substitution in Job/JobDefs WriteBootStrap.
- You can use now 'WriteBootStrap = '/path/%c_%n.bsr''
-kes Apply patch supplied in bug #656 to pass priority field
- in the run dialog to the Director in gnome console
-kes Restore DCR after VOL_NAME_ERROR in mount.c. Hopefully
- this will fix bug #627 where Bacula eventually gets
- confused about what Volume it wants.
-kes Add a new close_part() class in the SD to save the device
- state around open/close_part/open for DVD writing. This
- should fix the num_dvd_parts getting zeroed as reported by
- Richard Mortimer.
-kes Apply patch from Richard Mortimer that correct edit code
- for debug output of st_size.
-ebl Add support of encrypted data stream to bscan.
- display data_len instead of data content (may be binary)
-06Sep06
-kes Add dev->close() in dir_ask_sysop_to_mount_volume() in
- bcopy. Fixes bug #669 reported by Eric.
-kes Fix incorrect number of arguments in SQL statement in
- sql_get.c as reported by Eric.
-kes Manual updates.
-kes Update examples directory.
-kes Remove unused variable in winservice.cpp
-kes Make Win32 make command build installer.
-rbn Add new Install Type page, used to select between Automatic
- and Custom installs. Automatic installs only prompt for
- configuration items that can't be reasonably defaulted.
-rbn Added Bacula logo to page headers.
-rbn Added Upgrade support
- - Configuration and component selection are migrated from
- pre-1.39 installs.
- - Configuration of upgraded components is preserved and
- not prompted for
- - Configuration of new components is handled according to
- the Automatic / Custom selection.
- - Component selection is defaulted to previously selected
- components.
-rbn Installation of Server components is disabled on
- Windows 95, 98 and ME.
-rbn Added URLs for support, info and upgrades to Bacula entry
- in Add/Remove Programs.
-rbn Added Version info to Bacula entry in Add/Remove Programs.
-04Sep06
-kes Correct dvd code that breaks tape labeling.
-kes Implement Enabled on update slots.
-02Sep06
-kes When doing a label, pass the VolBytes back to the Director,
- which puts it in the catalog.
-kes Print an error message if the user attempts to prune an
- archived Volume.
-kes Need to start using %ld when sscanfing 32 bit values.
-kes Update the free
-kes Correct the counting of VolCatBytes for DVDs.
-kes Add code to mount.c to require that VolCatBytes corresponds to
- what is actually found when doing an append.
-kes Update freespace only after writing on the DVD.
-kes Remove code that blows away the current part in the spool file.
-01Sep06
-kes Apply new dvd-handler patch from Richard Mortimer.
-kes Tweak so that debug level 20 shows only DVD commands.
-kes Correct spooled_part flag in dev.c close() so that it is cleared
- when the spool file is deleted or does not exist.
-kes Print part number in read_records when eof hit (restore).
-rbn Installer default changed to start services on new install.
-31Aug06
-kes Make find with no args in tree restore return error rather than
- stopping the selection. Fixes bug #665
-kes Rework DVD writing to ensure that the last part is written
- on open_next_part when dealing with a spool file.
-kes Correct the lseek_dev() routine to handle end point correctly
- (bug introduced by me).
-kes Allow part number to exceed num_dvd_parts in lseek_dev().
-rbn Change make_session_key on Windows to use WIN32 APIs to produce
- a better seed.
-rbn Add new tool scsilist.exe which displays the changer, tape and
- CD/DVD (1394, SCSI, SATA, ATAPI) devices and the information required
- to add them to bacula-sd.conf.
-30Aug06
-kes Apply dvd-handler patch from Richard Mortimer.
-kes Apply dvd error check patch from Richard Mortimer.
-kes Apply bpipe race patch from Richard Mortimer.
-kes Rework how DVD labels are handled and set append only
- when part > num_dvd_parts.
-27Aug06
-kes Rework many features of DVD writing and reading. Added many error
- messages. Most importantly changed part to represent the current
- part number base zero. This makes current DVD writing incompatible
- with previous version.
-26Aug06
-kes Add host:port to connect failure messages to FD and SD from Dir.
-kes Add WhereACL to console ACL list. If nothing is specified, only
- the default is permitted for restore. Otherwise, *all* allows any
- path, or you can specify permitted paths. This should allow control
- over where users can restore files. This is untested.
-kes Modified message to add a ? (as in loaded?) when querying the autochanger
- for what Slot is loaded.
-kes Fixed the use of Slot, so that is more correctly maintained, thus
- eliminating unneeded duplicate calls to determine what Slot is loaded.
-25Aug06
-kes Install man pages with 'make install'
-kes wx-console crashes because of differences between Bacula and wxWidgets
- malloc()/free(). Tweak wx-console to use bmalloc()/bfree() for Bacula
- calls.
-kes correct improper indenting in wx-console/console_conf.c
-kes update wx-console header copyrights
-kes Fix bug #658 where wx-console mangles file/directory names containing
- commas.
-24Aug06
-kes Add Media.Enabled flag to client backups for dotcmds.c
-kes Enforce Media.Enabled=1 for a current restore to work.
-kes Require restore case 3 to have sqlquery permission to work.
-kes Remove obsolete del_MAC sql command.
-kes Ensure that bscan creates Volumes with Enabled=1.
-
-Version 1.39.20 beta released:
-22Aug06
-kes Correct missing Client table reference in SQL pointed out by
- Marc.
-21Aug06
-kes Fix Win32 build (new entrypoint, start baculafd).
-20Aug06
-kes Add -n option to bconsole to turn off conio.
-kes Print JobIds to be migrated in Job Report.
-kes Add additional user supplied notes to the messages part of
- bacula-dir.conf concerning multiple email addresses.
-kes Fix an incorrect comment pointed out by a user in dvd_handler.in
-kes Add more recent Feature requests to Projects file.
-19Aug06
-kes Apply Maritn's fix to src/win32/Makefile.
-kes Apply Martin's fix to configure.in for pthreads on FreeBSD 4.x
-kes Implement pruning for Migration and migrated jobs.
-kes Implement PoolOccupancy migration.
-kes Implement PoolTime migration.
-16Aug06
-kes If doing a mount, look for a slot, and if specified pass it to
- the SD so that it can load the autochanger.
-kes Return DVD=1 flag if a label command is done to a DVD. This
- permits setting VolParts to 1.
-kes Apply DVD patch from Richard Mortimer <richm@oldelvet.org.uk>, but
- rework ua_label code based on DVD media type to use DVD flag returned.
-15Aug06
-kes Eliminate some compile warnings in dird_conf.c
-kes Format the bytes field in the terminated jobs part of the status
- command for the three daemons with suffixes to reduce print size
- of backup bytes. Suggested by a user.
-kes When not descending into a directory, print the File= name that
- triggered it -- makes why not descending a bit clearer.
-kes Do not unload autochanger when doing a list command -- basic code
- from Eric Bollengier.
-12Aug06
-rbn Reworked the MinGW32 build-dependencies script, it has been renamed
- to build-depkgs-mingw32. It now handles two options -h to display
- help and -C to reextract the source and apply the patches. The -C
- option is useful for updating the source after new patches are
- released.
-rbn Moved the 3rd party package URLs to a separate file External-mingw32.
- This allows updating to new versions without having to modify the
- script and makes it easier to figure out which packages and which
- versions are used.
-rbn Added a new script build-depkgs-msvc.cmd which does the same thing
- as build-depkgs-mingw32 except they are built using Microsoft Visual C
- and placed in the depkgs-msvc directory. There is also an
- External-msvc file to describe the packages.
-08Aug06
-rbn Fix Windows cross-compile compatibilty problems with FreeBSD.
-07Aug06
-kes Fix bug #462 incorrect error message printed when client script called
- from File= was not found.
-kes Fix bug #558 (waiting for feedback) where Bacula needs too much time to
- do a rewind on Solaris when no tape is in the drive (Solaris does not
- have the detailed errno found on Linux). Added Solaris specific code.
- Note, this may apply to other OSes as well.
-06Aug06
-kes Defined BUILDING_CATS in src/cats/cats.h so that *nix builds.
-dsb Updated rpm spec for 1.39 - updatedb 9 to 10, add new man pages,
- fix bug 648 - update sqlite script patches, lock out gnome2console
- builds for platforms with gtk+ < 2.4.
- Updated build_rpm.sh - add remote source directory, add switch for
- signing, refine file names.
- Updated spec file again for Mandriva build as they have this curious
- custom of silently converting all manpages to bzip2 format just before
- the final packaging step.
-05Aug06
-rbn Fixed the Windows Makefiles so that they won't accidentally try and
- pickup binaries for the Unix build. This allows both the Unix
- build and the Windows build to be built in the same tree without
- interfering with each other.
-rbn Fixed error handling and cleaned up mtx-changer.cmd.
-rbn Added the rest of the database scripts. These are installed but are
- not yet edited for variable replacement.
-rbn Broke out the cats functionality from bacula.dll and put into new
- separate dlls for each database type. At installation time the
- correct one is copied to bacula_cats.dll.
-rbn Eliminate the need to install the mysql.dll on client only builds.
-rbn Moved dird/sql_cmds.c into the cats directory so all the database
- specific #ifdefs were in the cats directory.
-rbn Added a new sql_cmds.h with all the declarations for the variables
- exported from sql_cmds.c.
-rbn Moved catalog_db[] from lib/message.c to a new routine db_get_type()
- which is implemented in bdb.c, mysql.c, postgresql.c and sqlite.c in
- src/cats.
-kes Correct improperly formatted list command output reported by Dan.
-04Aug06
-kes Correct despool time calculation.
-03Aug06
-kes Remove previous changes to compat.cpp as they create problems.
-kes Use old style MD5 for FileSets to avoid Full saves on every Job.
-kes Attempt to fix problems with the msg_queue crashing on Solaris
- when Bacula is terminating, but problems remain.
-kes Add WIN32_VSS to HAVES in src/Makefile.inc.in to correct VSS
- name editing problems with too many \\?\es.
-kes Fix some Bacula source code style problems in compat.cpp.
-kes Add debug code to compat.cpp and convert non-Bacula debug code
- to Bacula style.
-02Aug06
-kes Change the name of the technical notes file from kes-1.39 to
- technotes-1.39. Prefix my messages with 'kes '.
-kes Allow dequeue_messages() to be called twice. Should fix bug
- # 649.
-kes Add Job type to bscan Job information output.
-01Aug06
-kes Update copyright date in program files, and for the most part
- put it on a #define.
-kes Implement %q in bsnprintf.c apparently I forgot it.
-31Jul06
-kes Make disk-changer sed command compatible with FreeBSD.
-kes Make a first cut at a ReleaseNotes and ChangeLog for a
- beta release.
-kes Make make clean descend into the src/win32 directory.
-kes Fix some #ifdefing so that Solaris and FreeBSD compile
- sys/stat.h was turned off.
-kes Use suffix editing for new transfer rate messages.
-kes Attempt to come up with a workaround which seems to be an OS
- bug where write() returns EBUSY. IMO this should not happen.
- It triggered in truncatebug test. The workaround retries using
- a 100 ms wait.
-kes Eliminate a strerror() call in a class method that failed with
- older C++ compilers.
-kes Use rm -rf rather than rmdir to delete the src/win32/release
- directory during make clean.
-30Jul06
-kes Make bscan ignore ACL streams.
-kes Update projects files with new Feature Requests.
-kes Generate current English and French manuals and upload
- them to the site.
-kes Update the home page to include the new British/French flags to
- switch between translations. Work done by Alexandre Baron.
-kes Make disk-changer script print an error message if the changer
- directory is not defined.
-kes Create a generic DB routine for getting an int (32/64 bit) from
- the DB.
-kes Add more migration code.
-kes Add a few more files to .cvsignore here and there.
-kes Minor fixes for SD write rate and despooling rate.
-kes Turn off new test code in src/console.c
-
-Version 1.39.18
-29Jul06
-kes Incremented the version number to signify that all of Robert's code
- for Win32 that was in the branch is now integrated into the HEAD,
- and that Eric has submitted code that we hope will provide limited
- backward compatibility with 1.38 file daemons (more testing to be
- done).
-kes I rationalized a few of the names of the variables (mainly jcr names)
- that are used during migration as keeping three different jcrs at the
- same time clear in ones head is not easy.
-
-Version 1.39.17
-28Jul06
-eb Tweak new runscript feature to work with 1.38.x FDs.
-eb Correct crypto.c to fix segfault when restoring an encrypted stream
- on fd which don't use rsa keys.
-eb Add yes/no English keywords on localized yes/no questions.
-27Jul06
-kes Several important commits from Robert Nelson for code cleanup and
- Win32 build.
-kes Modify console.c so that when conio is enabled, it converts \n to
- \n\r before outputting to the console. Hopefully this will fix
- the problems with expect in Perl that Eric saw.
-24Jul06
-kes Change cats/sql.c to eliminate %-*s format, which I think is turned
- off in bsnprintf.
-kes Add Comment field to llist of a volume.
-kes Allow true/false in some yes/no questions.
-kes Implement update volume enable=(on|off|true|false|archived|0|1|2)
-kes Remove a few /n's when scanning commands from another daemon. This
- permits adding additional fields later.
-kes Modify dbcheck to handle ctl-d and to delete Log table entries.
-kes Update README.mingw
-22Jul06
-kes Tweak authentication to work with 1.38.x FDs.
-kes Tweak catalog make scripts.
-kes Fix catalog upgrade scripts so that they work.
-kes Correct despooling debug code to eliminate race condition.
-19Jul06
-kes Add additional fields as specified by Arno to LocationLog.
-kes Add comment field to the Media record.
-kes Add Time field to the Log record.
-kes Correct migration SQL (thanks to Bill Moran) so that it
- runs with PostgreSQL also.
-kes Add spooling/despooling info in status output of SD.
-17Jul06
-kes Spend a lot of time integrating mkcdrec with the rescue disk.
-kes Add VOLMGMT message class for volume management messages (none yet).
-kes Add CATALOG as a destination. It goes into the LOG table.
-kes Implement the Log table in the DB.
-kes Implement the Location Log table in the DB (for user use).
-kes At Eric's request add a run_scripts() just after blast_data in
- src/filed/job.c
-10Jul06
-kes Add Enabled column to Location, correct some typos in DB schemas.
-kes Correct bug I introduced into RunScripts enum.
-kes Add log table to Catalog
-kes Purge original job migrated if the migration terminates normally.
-kes Cleanup purging of files/jobs so that it is done only in a
- single subroutine.
-kes Add new VOLMGMT message class.
-kes Add Catalog message destination (user conf code remains to be written).
-09Jul06
-kes Modify read_record and friends to properly deal with migration
- needs.
-kes Update debug code in read_record.
-08Jul06
- ======================= Warning ==========================
- Separate read and write storage in Jobs in the Director. This
- is a major rewrite of some of the low level code and hence has
- a high probability of introducing bugs.
- ==========================================================
-
-kes Move the job init code up to *before* the job is put into
- the job queue (resource allocation queue). This permits the
- job to establish whether it will read or write or do both.
-kes Add name() methods to all the resource classes.
-kes Implement separate read and write storage resource
- allocation/deallocation in jobq.c
-
- ======================= Warning ==========================
- Implemented new method of getting the default Storage from the Media
- record rather than from the MediaType for restore. As a fall
- back, if no Storage is defined, use the MediaType. This
- eliminates most all prompts if there are multiple MediaTypes
- used. This is an important and fundamental change.
- ==========================================================
-
-kes Add more detail (Storage, Device) to list of volumes printed
- for restore.
-kes More code in migrate. In particular start multiple jobs if
- migrating a volume.
-kes Probably overkill, but ensure that the bsr is unique even within a
- job in FD and SD.
-kes Rework bsys.c drop() so that it now should work as expected.
-kes Update a bunch of old copyrights -kes particularly in .h files.
-kes Remove src/lib/bshm.c/h
-05Jul06
-kes Migration fixes
-04Jul06
- ======================= Warning ==========================
- All hash codes in the database are now kept in world
- compatible base64 format (no = filling). This means that
- all FileSets will be updated and if you are running
- verify jobs, you must do an InitCatalog.
- Authentication uses the new algorithm, but should be
- backward compatible with 1.38.x
- ===========================================================
-
-kes Modify the authentication routines so that the 1.39.15 Director
- always runs with the compatible binary to base64 code (same as
- the rest of the world). It will however detect if an SD or
- FD is running the old code and if that is the case, will use
- the old algorithm for authentication. However, all consoles must
- use the compatible algorithm, and all data entered into the database
- (all hash signatures, MD5, SHA1, ..., and all FileSet hashes) will
- use the compatible algorithm.
-kes Rename the cram_md5 routine names to be slightly more appropriate
- to what they are doing (challenge and respond).
-kes Robert committed his #ifdef and header cleanup.
-30Jun06
-kes Fix a compiler warning in files/backup.c
-kes Cleanup NOT NULL vs DEFAULT 0 in database creation.
-kes Tweak btape.
-kes Robert committed his low impact changes.
-kes I removed a size_t from the jcr.h definition.
-kes Update the tape regression scripts (still to be tested).
-kes Add gcc and gcc-c++ requires to srm as suggested by a user.
-kes Require done or quit to exit from in memory tree restore.
-26Jun06
-kes Write install/uninstall of new manpages. There are now a
- pile of man pages. Some of which need a lot of work.
-
- ======================= Warning ==========================
- The --mandir ./configure option now points to the top level
- man directory. The man files will be installed under
- mandir/man8 and mandir/man1 as appropriate.
- ==========================================================
-
-kes Add complete text of GPL to LICENSE.
-kes Implement job report that indicates where Storage and Pool
- came from -kes with overrides and Pool storage and NextPool,
- it is all very complicated.
-kes Create a few common subroutines for backup.c and migrate.c
-kes Eliminate warning messages from tray-monitor.c
-25Jun06
-kes Apply fix for scheduler for missing unlock_jobs().
-kes Clean out autoconf caches before rebuilding configure
-kes Fix the FreeBSD pthreads lib define updated by Dan.
-kes Add missing semicolon in src/console/console.c
-kes Add Robert's enhanced version of build-win32-cross-tools
- as well as his patch file.
-kes Note, the new gcc options are likely to break building of
- wx-console or the tray-monitor ...
-24Jun06
-kes Implement Robert's suggestion to suppress printing compile lines.
-kes Detect GCC correctly (I hope)
-kes If using GCC (actually g++) add the following compiler flags
- -fno-strict-aliasing -fno-exceptions -fno-rtti
+Release Version 3.0.0:
+05Apr09
+kes Fix Win32 make clean to clean correctly
+kes Cleanup Win installer dialog messages a bit ...
+04Apr09
+kes Separate object/binaries in Win32 and Win64 builds. More to be done.
+kes Add bconsole to Win64 installer.
+03Apr09
+kes Implement more automatic build of Win64 client. Note, there are still
+ lots of warning messages, but it seems to build a correct binary.
+02Apr09
+kes Enhance Job messages from SD when the FD->SD protocol is incorrect
+ and the SD hangs up. Previously this looked like a comm error.
+mvw Fixed problem in xattr and acl code trying to send empty acl or xattr
+ streams.
+mvw Fix for bug #1261 where we send out a null stream when a file only an
+ acl and xattr support is also turned on.
+mvw Added some warnings to configure when using libtool and static in
+ one configure.
+30Mar09
+ebl Fix small memory leak in fileregexp bsr code
+29Mar09
+kes Correct bacula32.def entry point as specified by James.
+kes Add code to FD plugin driver to make a copy of the plugin
+ filename to be saved to avoid save_file from zaping it.
+28Mar09
+kes Directly mark all files saved by plugin as being seen for Accurate.
+kes Add checks on the plugin version and the plugin license. Currently
+ only implemented for FD plugins.
+kes Add installation of /usr/share/doc/bacula
+kes Modify plugin checkFile to return bRC_Seen to cause file
+ to remain. Previously was true/false.
+27Mar09
+kes Implement installation of bat help files
+ The help files are installed in the htmldoc dir and can be set
+ by --htmldoc=xxx on the ./configure. Default is:
+ /usr/share/doc/bacula/html
+kes Update projects file
+kes Apply patch from Pasi Karkkainen <pasik@iki.fi> that adds
+ Previous Job name to migrate job report.
+26Mar09
+kes Apply bacula-autoconf-db-m4.patch from Kjetil Torgrim Homme
+ <kjetilho@linpro.no> that doesn't *require* the static libraries
+ for the SQL database engine. Fixes a build problem if the static
+ libraries are not loaded.
+25Mar09
+ebl Update Makefiles to compile win64 using make WIN64=yes
+kes Disable plugin options in ua_run.c
+kes Added the following to provide solutions to the plugin/Accurate
+ problem -- bug #1236 Cannot restore incremental backups with
+ the Exchange plugin.
+ - New Bacula read-only variable bVarAccurate -- returns accurate flag
+ - New Bacula write-only variable bVarFileSeen -- marks a file as seen
+ - New plugin entry point -- checkFile that is called at the end
+ of an Accurate job and allows the plugin to mark a file as seen.
+24Mar09
+kes Temporarly turn off comm timers because it causes bat to seg fault.
+ Must research making SIGUSR2 work with bat and Qt.
+24Mar09
+ebl Use MTIMEONLY fileset option in accurate check
+23Mar09
+ebl Tweak code to compile win64 version with mingw
+21Mar09
+Kes Attempt to correct timing problems with starting bat and obtaining
+ lists. Maintain in_command counter to know when a list is coming.
+20Mar09
+kes Convert seconds.seq separator into seconds_seq so that Bacula
+ editing of the Job name from the full Job name works. This fixes
+ bug #1255 'variable %n changed'.
+kes Second half of proposed fix for bug #1227 that does not
+ mark virtual volumes for unloading.
+kes Proposed fix for bug #1227 Job and labeling new tape.
- ===================== Warning =============================
- Turn on new bsnprintf() code. This could cause print output
- to look different.
- ===========================================================
-
-kes Fix crypto when not using openssl. I previously overlooked this.
-kes Eliminate crypto type punning problems by eliminating void * and
- using uint8_t * instead.
-kes Harden authentication failure in FD by single threading errors
- and forcing a 6 second wait.
-
- ===================== Warning =============================
- Removed 'Accept Any Volume' directive.
- ===========================================================
-
-kes Major cleanup and simplification of regress using shell functions
- (more tests to be converted to new format)
-kes Add detection of 64 bit Irix as indicated by user.
-kes Increment catalog database id from 9 to 10.
-kes Add a few of the new database fields to the various C++
- structures.
-kes Implement code to fill in the most important new fields (e.g.
- Media Enable).
-kes Ensure that most of the new fields are in create/get/insert/update.
- More work to be done.
-22Jun06
-kes Update some very old licenses in src/cats.
-kes Modify the database format for handling Migration jobs:
- Add PriorJobId, RealEndTime to Job table
- Delete MAC table
- Remove Stripe from JobMedia record (not used, wasting space)
- Add ScratchPoolId, RecyclePoolId, Enabled to Media record
- Add Cost to Location table.
-kes Delete mac_record subroutines.
-kes Add new table values to create/update/get routines as appropriate.
-kes Update the update_tables and make_tables scripts.
-kes Make a first cut in using a union where multiple pointers (actually
- pointers to pointers) are stored.
-kes Make some changes to base64.c suggested by Robert and others and add
- a small amount of documentation.
-kes Add some changes suggested by Peter for Solaris (bregex...)
-kes Make runscript.h always built because it needs to be pulled into
- more places. In particular its RES was left out of a union.
-kes Renumber the enum{} list in runscript.h to avoid starting from zero.
- This makes it slightly easier to detect uninitialized variables.
-14Jun06
-kes Remove xpg4 lib from FreeBSD build as it is no longer needed and
- sometimes creates install problems.
-kes Change a couple of %T in strftime to %H:%M:%S as seen in Robert
- Nelson's code. More to do.
-kes Convert a few store_bit to store_bool in filed_conf.c.
-kes DVD tweak to block.c as supplied by Uwe Muessel.
-04Jun06
-kes Modify configure.in to check for typeof().
-kes In findlib/attribs.c use typeof instead of templates if possible.
-01Jun06
-kes Implement partial error messages for src/filed/acl.c
-kes Fix return code to fail when doing update barcodes and
- Pool resource is not found. This previously caused Volumes
- to be labeled as cleaning tapes.
-kes Small updates to projects.
-27May06
-kes Add Eric Bollengier patch for new RunScript directive. It breaks
- compatibility between dird and fd.
-26May06
-kes Prevent DVD code from rewriting label if the device cannot be
- opened read/write.
-kes Used __GNUC__ to detect GNU g++ as suggested by John Goerzen to
- fix Debian build bug.
-kes Fix Dir/SD run race in migrate.c, verify.c, and restore.c
-kes Integrate manpages contributed by Jose Luis.
-kes Update projects file.
-kes Add manpages Makefile.in to configure.in
-kes Remove installation of bacula.8 in scripts directory.
-24May06
-kes Implement patch submitted by cesarb in bug #606 to implement O_NOATIME
- support.
- O_NOATIME is a open() flag which makes it possible to read a file without
- updating the inode atime (and also without the inode ctime update which
- happens if you try to set the atime back to its previous value). It also
- prevents a race condition when two programs are reading the same file, but
- only one does not want to change the atime. It's most useful for backup
- programs and file integrity checkers (and bacula can fit on both
- categories).
-
- Recent versions of the Linux kernel and glibc have support for it (the
- glibc support being mostly copying the O_NOATIME definition to
- bits/fcntl.h). If there's no support for it on the kernel, trying to use
- it does nothing (since the kernel ignores unknown flags).
-
- If the kernel has support for it, trying to use it either works, fails
- silently (mostly in remote filesystems), or returns errno=EPERM (if you
- are not either the owner of the file or root). A simple way to prevent the
- failure is to open the file without the flag and set it later with
- fcntl(F_SETFL), ignoring any EPERM errors.
-kes Applied patch posted by Jaime Ventura to bug #570 to correct failure
- of restarted jobs to complete (due to a destroyed pthreads conditional
- variable used by the message thread).
-kes Fixed bug #619 where Bacula would not restart jobs with MaxRestartTimes
- set to zero.
-kes Apply patch from John Goerzen bug #611 to fix bad manual links in the code.
-kes Apply patch from Rudolf Cejka bug #614 to removed trailing
- colons in query.sql file.
-kes Apply patch from Rudolf Cejka bug #613 to correct prunning of files
- not to create orphans.
-kes Apply patch from Rudolf Cejka bug #617 to use mtime instead of ctime
- in restore long listing.
-kes Apply patch from Rudolf Cejka bug #609 to use MarkId in verify.c instead
- of incorrect MarkedId.
-kes Apply patch from adioso bug #616 to correct text in manual (replace
- Director with File daemon).
-kes Rework a few of the zlib changes so that they build properly.
-
-21May06
-kes Move DIR 'run' command to SD before starting the message thread
- as suggested by Cristopher Hull to avoid a race deadlock from
- two threads using the bsock structure.
-kes Modify LICENSE to correct some problems pointed out by Debian.
-05May06
-kes Correct EOF with no \n lex.c problem.
-kes Tweak compat.h compat.cpp and merge with apcupsd
-kes Add additional INFO messages if autochanger cannot be used.
-
-02May06
-kes Simplify Win32 Makefile
-kes Correct count of buffers/bytes used by smartall.c
-kes Updated compat.h after porting apcupsd to MinGW.
-01May06
-kes Work on getting wx-console building on MinGW. wxWidgets now builds
- started adding Makefile ...
-kes Moved MinGW library objects to src/win32/lib to reduce clutter.
-30Apr06
-kes Reloading a bad configuration file doesn't kill director any more.
- Thanks to fix from Eric Bollengier.
-29Apr06
-kes Fix problem of accents with new Win32 code.
-kes Integrate Howard's VSS patch. Tweak it a bit. VSS now
- works in the MinGW build with the exception that there
- is a problem with accented characters -kes i.e. there is
- some mapping problem with wide characters.
-kes The code no longer compiles with Microsoft VC++.
-28Apr06
-kes Start implementing Christopher's St.Bernard code.
-kes Add Christopher's mods for opening files.
-kes Strip \r \n from Win32 error messages (Christopher)
-kes Add more info about Win32 system if unknown (Christopher)
-kes Use bstrn(cpy, cat) routines to avoid overrun in compat.cpp
-kes Fix a number of incorrect strings marked for translation, when
- they should not be (e.g. commands).
-kes Fix StartTime bug reported for ClientRunBeforeJob and RunBeforeJob
- Patches supplied by user in bugs #608 and #599.
-kes Use most recent of st_ctime and st_mtime in restore tree DIR
- listing. This fixes some problems with Win32 printing incorrect
- values.
-kes Correct the clock shift comm time calculation between the DIR
- and the FD. It was added rather than subtracted.
-kes Strip all backslashes in filenames to be restored on Win32
- machines -kes the names should all be in Unix format, and if
- there are any backslashes it is most likely due to an improper
- FileSet definition, and the files will not otherwise be
- restorable.
-kes Remove lib/regex.c (replaced by bregex.c).
-kes Delete src/win32/License.txt
-kes Modify installer to install LICENSE
-26Apr06
-kes Fix bug in build-win32-cross-tools script reported by Howard
-kes Implement cross compiled bconsole
-25Apr06
-kes Fix barcode test, eliminate BOOL (doesn't exist on Linux).
-kes Write first cut of README.mingw32
-kes Add back ua_label barcode fix from Rufolf Cejka.
-kes Integrate the majority of the Mingw cross-tools submission
- made by Howard Thomson. Everything compiles, with zlib, openssl,
- and VSS turned off. Linking needs a pthreads library ...
-23Apr06
-kes Add 'Dir Status' button to the gnome console.
-kes More work on migration.
-kes Restore non-compatible base64 coding to permit compatibility.
-kes Display heap stats in Storage daemon without debug level.
-22Apr06
-kes Integrate most of the MinGW changes -kes more to do.
-21Apr06
-kes Implement using pg_config for finding PostgreSQL files.
- Fixes bug #600. Patch supplied by user.
-kes Remove -t option from mktemp in mtx_changer.in and use
- working directory. Fixes bug #578.
-kes Update job start time after the any run before job so that
- files created by the script are only backed up once. Fixes
- bug #599.
-kes Strip trailing newline only from filenames entered in
- the restore command when reading a file. This permits
- the user to enter filenames with trailing spaces. Fixes
- bug #549. The user supplied a patch that I modified slightly.
-kes Use the most recent time (st_mtime, st_ctime) in the dir
- command in restore. This gives the user a better idea of what
- the newest file really is. This fixes bug #574. The fix
- was suggested by the user.
-kes Implement a compatible version of base64. This permits external
- programs to duplicate Bacula's base64 algorithm using standard
- routines. This fixes bugs #296, and 565. Patch submitted by
- author of bug #565.
- ================= Note ========================
- Previous Signatures stored in the database are no longer
- compatible with this. The main downside is for Verify jobs,
- and doing an InitCatalog run will fix the problem. Also, the
- authentication between the deamons is changed, so all daemons
- must be simultaneously upgraded.
- ==============================================
- If you don't like this fix, set:
- const bool compatible = true;
- to
- const bool compatible = false;
- in src/lib/base64.c
-20Apr06
-kes Ensure that DB signature is never NULL.
-kes Ensure that DB table names are not translated.
-kes Fix scheduler to handle time skew (eg daylight savings).
-kes Fix scheduler to use lock_jobs() to avoid most problems
- with reload. Window is now milliseconds.
-19Apr06
-kes Apply patch from Christopher Hull
- kes Allow multiple connections to database with different
- parameters.
- kes Invalidate the scheduler when doing a reload. Fixes seg
- fault, but still 60 second window.
- kes Additional info in Reschedule message.
- kes Use set_jcr_job_status() everywhere to prevent loss of
- cancel, error.
- kes Display peer IP in FD if error from connecting DIR.
- kes Don't increment file count for DIRBEGIN.
- kes Replace illegal characters in Win32 filename by _.
- kes Add SE_CREATE_PERMANENT_NAME privilege in Win32.
- kes Hash hard link filenames rather than linked list.
- kes Fix for security failure in chdir on Win32.
- kes Add CreateDirectoryA/W win32 API entry points.
-kes Add /silent option to Win32 FD for Install/Remove service.
-kes Always print Heap statistics in FD.
-18Apr06
-kes Remove the -f option from the chown in Makefile.in for more
- portability.
-kes Change setting the group in Makefile.in to use chgrp for
- more portability.
-kes Implement a write_store and read_store to replace
- dirstore in reserve.c
-kes Implement a Bacula read/write lock for Python rather
- than using the Python lock to avoid recursive problems.
-kes Correct the uninstall directory names in filed/Makefile.in
- as reported by a user.
-17Apr06
-kes Correct some problems with database creation (new tables).
-kes Replace a bunch of old 0x%x by %p.
-kes Get first cut of Migration with Job selection working.
-16Apr06
-kes Change store_bit() to store_bool() for the Spooling in
- dird_conf.c -kes bug reported by Robert Nelson.
-15Apr06
-kes Correct Makefile bug found by Dan Langille.
-14Apr06
-kes Correct Makefile for Solaris /bin/sh
-kes Correct mtx-changer.in for Solaris /bin/sh
-kes Abort if a conf resource does not have a Name =
-12Apr06
-kes Change the name of the regex program to bregex.
-kes Add the bwild program to the tools directory. It is similar
- to the bregex program.
-kes Implement create bregex.h and bregex.c in src/lib from the
- Python regexp program.
-kes Use the new bregex.c to implement Regex expressions on Win32.
-11Apr06
-kes More work on migration.
-kes Implement wild program in tools directory for testing
- wild-cards. Almost identical to the regex program.
-kes Up port VSS single thread locking code.
-kes Replace N_(..) by NT_(...) to inhibit translation of
- commands.
-kes Modify Makefile to change the permissions on Working Directory
- to 770 if the directory is created.
-kes Do not fail the Makefile if changing the permissions or
- owner/group on WorkingDir fails.
-kes Remove early selection of Scratch Volumes in the recycling
- algorithm.
-kes Correct the old recycling algorithm so that Scratch Volumes
- are selected when looking for a Volume in the changer.
-kes Correct a typo in the Verify SQL reported by Joe Park.
-10Apr06
-kes Remove automatic case folding on Windows FDs. You must
- explictly use the 'Ignore Case = yes' option.
-kes Remove the code added to 1.38.6 and 1.38.7 that pulls a
- scratch volume in an Autochanger early in the 'recycling'
- algorithm.
-09Apr06
-kes Make weof() and clrerror() methods of class DEVICE.
-08Apr06
-kes Tweak license to include Microsoft restrictions.
-kes Move mysql.reconnect to after real_connect(). Thanks to
- Frank Sweetser for the patch.
-kes Disallow a backslash in a File = directive (Windows junk)
- unless the string is quoted.
-kes Apply Eric's patch to ua_label.c so that daemon protocol
- is not translated.
-kes Add NT_ definition for strings that should not be translated.
-kes Apply NT_() to ua_label.c
-kes Remove timed wait for VSS on Win2K3 as it is not yet
- implemented.
-kes Correct bacula.in script to reference bacula-ctl-xx in the
- sysconfig directory rather than the bin directory.
-26Mar06
-kes Fix a long standing bug in the bacula start/stop scripts.
-kes Attempt to add the new bacula-ctl-* files to the rpm.
-kes Switch to using typeof() for list traversing to avoid
- as many FC5 g++ compiler warnings as possible.
-25Mar06
-kes Split the bacula start/start script into four files:
- bacula -kes starts and stops calling other scripts
- bacula-ctl-dir -kes starts/stops the director
- bacula-ctl-fd -kes starts/stops the File daemon
- bacula-ctl-sd -kes starts/stops the Storage daemon
-24Mar06
-kes Create datestyle fix for PostgreSQL. Fixes bug #574.
-kes Correct editing of JobId from int to int64 in fd_cmds.c
-kes Eliminate FileSet name race with bash_spaces() and multiple
- threads by bashing in a local.
-kes Fix error return from 'use storage' to print a correct error
- message rather than nothing.
-kes Correct false re-read last block error message when two jobs
- are simultaneously writing at the end of a tape.
-kes Simplify exit conditions in the reserve.c code to avoid
- possible non-release of reservation_lock().
-kes Suffle lock order in reserve to avoid deadlock between
- reservation lock and device mutex.
-21Mar06
-kes Initialize jcr mutex before first use. Thanks to Thorsten for
- tracking this down for me !!!! as it broke the Win32 build.
-20Mar06
-kes Integrate addition of line count limitation to bsmtp -l from
- Sebastian Stark <stark at tuebingen.mpg.de>
-17Mar06
-kes Implement regex test program in tools directory.
-kes Attempt to fix time problem with bsmtp with foreign langs.
-kes Add strip_trailing_newline() submitted by user.
-kes Implement regex matching in migrate.c
-16Mar06
-kes Fix bug #537 to allow arbitrary time to mount a volume for
- restore, if polling is turned on.
-kes If dir_user or dir-group is specified in ./configure apply it to
- the working-dir. Fixes bug #533.
-kes If rescheduling a job cancel the previous incarnation with the SD.
- Fixes bugs #566 and 557.
-kes Fix bug #567 do_message() definition type conflict.
-
-14Mar06
-kes Add more jcr methods and make mutex and use_count private.
-kes Create lock/unlock methods for jcr.
-kes Fix PostgreSQL bug doing sql_data_seeek() by explicitly reading
- records to get to seek position.
-kes Integrate patch from bug #561 to correct conio.c signal definitions.
-kes Fix Rescheduling failed Jobs. Ensure that SD message thread
- terminates correctly by doing pthread_kill(). Do not destroy
- SD cond wait variable between executions of the job. Use local
- mutex for cond variable to avoid blocking jcr chain. Fix poor
- use of jcr use count in jobq.c for restarted jobs.
-kes Fix obsolete usage of foreach_dlist() to use foreach_jcr() in
- lib/jcr.c -kes prevents locking the jcr chaing.
-kes Apply patch from bug #564, which corrects listing volumes with
- multiple autochangers. Apply same fix to next volume list.
-kes Fix bug #562 where restore bootstrap file is not unique.
-kes More details in implementing David's migration syntax proposal.
-kes Save and restore dcr when swapping drives so that if we have
- a write dcr it is not lost.
-kes Use new routine lock_reservations() to lock the reservations
- system, and call it while looking for a volume in askdir.c.
- This could possibly fix bug #543.
-kes Stop SD command loop if job is canceled.
-
-08Mar06
-kes Remove old code from findlib/create_file.c
-kes Rename mac.c migrate.c
-kes Add user friendly display of VolBytes in job report.
-kes Rename target... to previous... to make it a bit easier to
- understand.
-kes Add selection type and selection pattern to Migration (idea
- given by David Boyes).
-
-04Mar06
-kes The po files should now be current.
-kes Fix new sql_use_result() code to properly release the
- buffers in all cases.
-kes Use the keyword ujobid to mean the unique job id; job or jobname
- to mean the Job name given on the Name directive, and jobid to
- be the numeric (non-unique) job id.
-kes Allow listing by any of the above.
-kes Add the user friendly job report code for reporting job elapsed time
- and rates with suffexes from John Kodis <kodis at comcast.net>.
-kes Add Priority and JobLevel as Python settable items.
-kes Use TEMPORARY table creation where the table is created by
- Bacula.
-kes Add new code submitted by Eric for waiting on specific jobid.
-kes Add ACL checking for the dot commands.
-kes Fix restore of writable FIFOs.
-kes Fix a bug in bpipe where the string was freed too early.
-27Feb06
-kes Modify the Python class examples to inherit object -kes new way
- of defining classes. Patch from Felix Schwarz.
-kes Implement jobuid to replace old usage of job in keywords as
- suggested by Eric Bollengier.
-kes Apply patch for enhancing wait from Eric Bollengier. On can now:
- wait (wait for all jobs to stop)
- wait jobid=nn
- wait jobuid=unique id
- wait job=job-name
-kes Implement write variables for Python to set Priority (anytime), and
- Job Level, only during JobInit event.
-26Feb06
-kes Fix the block listing bug pointed out by Arno.
-kes Update the po files at Eric's request.
-24Feb06
-kes Fix Maximum Changer Wait, Maximum Open Wait, Maximum Rewind Wait to
- accept time qualifiers.
-kes Make catalog respect ACL.
-kes Add recycle count to Media record.
-
-Changes to 1.39.6-beta1 24Feb04
-23Feb06
-kes Add Rudolf Cejka's new rc-chio-changer.
-kes Implement pulling Volume from Scratch Pool if the
- Volume is in the autochanger.
-kes Implement additional command arguments for update Volume.
-
-Changes to 1.39.5
-22Feb06
-kes Back port changes to 1.38.5
-kes Fix recycle SQL for StorageId.
-kes Fix misplaced quote in mtx-changer script.
-20Feb06
-kes Note. Your database must be updated, or you must create
- a new database. I have not yet incremented the database level.
-kes Add Location table.
-kes Add LocationId, DeviceId, and MediaTypeId to Media record.
-18Feb06
-kes Implement create/get mac record in database for adding extended
- Migration data to the job record.
-kes Add new MAC table to update/make database scripts.
-kes Return Storage name used when getting VolumeNames for a job.
-kes Change bsr file keyword Storage to Device, which is more accurate.
-kes Ensure that Mac records are pruned/purged.
-kes Tweak SD tools to deal with changing media type.
-kes Integrate more dev.c subroutines as methods (e.g. strerror, bsr, ...)
-kes Pass pointer to dcr pointer to acquire_device_for_read() so
- that the subroutine can switch devices, and hence dcrs.
-kes Modify the multiple MediaType read code to re-use the same
- dcr when switching devices. This makes the code much more
- robust.
-kes Integrate patch from Karl Hakimian that reads JobIds, FileIndexes
- from a table for restore.
-kes Add Storage name to VolParams, but it really should be Device.
-14Feb06
-kes Add disk-changer to scripts directory + configure/Makefile
-kes Eliminate PoolId from jcr -kes it is in jcr->jr.PoolId
-kes Implement store_bit scanner to replace store_yesno. Mostly done.
-kes Implement new store_bool that stores in a bool.
-kes Add true/false to yes/no conf directives.
-kes Make first cut at changing appropriate store_yesno to store_bool.
-kes Complete implementation of Pool storage devices.
-kes Move starting clones to job.c
-kes Move create_restore_bootstrap_file() to job.c
-kes Make copy_storage() more general to be able to handle
- Pool storage.
-kes Cleanup a lot of migration code for manual running, including
- using Pool storage.
-kes Move getting a scratch Volume into a subroutine.
-kes Make all places a Volume that is added to a pool to
- respect max vols.
-kes Fix bug in autochanger recycle code (improper edit 64 bit).
-kes Fix segfault in restore command when no value specified.
-kes Start adding code to handle multiple MediaTypes in restore.
-kes Eliminate race condition in getting Volume name for
- two drive autochanger.
-kes More debug code in autochanger.
-kes Add storage keyword to bootstrap file, add parsing.
-kes Move slot in bsr file into Volume record as there will be
- a different slot for each Volume.
-kes Create reserve.h
-07Feb06
-kes Implement Pool storage overrides.
-06Feb06
-kes Implement first cut of Migration.
-kes Implement mysql_use_result() from patch by Karl Hakimian.
- This reduces significantly the memory consumption during
- the restore tree building, and hence runs faster too.
-kes Implement StorageId patch supplied by user (reggie) in bug
- #536. This should permit Bacula to work correctly with two
- autochangers.
-kes Implement Job listing variations suggested by a user.
-kes Move updating bootstrap code in backup.c to subroutine
- update_bootstrap_file().
-kes Add new job status elapsed time and bytes written user
- friendly job report output patch sent by John Kodis
- <kodis at comcast.ne>.
-kes Implement a storage list in Pools.
-kes Separate out setup_job() code from run_job().
-kes Get migration working -kes lots of changes in mac.c in both
- DIR and SD.
-kes Apply patch from user (Eric Bollengier I think) that fixes a
- DIR crash when no arguments are supplied to a dot command.
-kes Fix typo (strcpy->strcmp) in ua_prune.c as reported by Martin.
-kes Fix command arg name->volume in label command of gnome-console.
-kes Fix SD acquire.c to release correct DCR by explicitly testing
- on the dcr address rather than trying to devine if it is a read
- or write dcr. This failed in error conditions when the device was
- not fully setup.
-
-30Jan06
-kes Apply user supplied patch for more readable rate output
- in job report.
-kes Continue implementing migration.
-kes Implement support for removable filesystems in SD.
-kes Ensure that btraceback scripts can be read by anyone.
-kes Replace dvd-freespace and dvd-writepart by dvd-handler.
-kes Correct bug where canceling restore before the FD contacts
- the SD causes the drive to be left in read mode.
-kes Move ofline_or_rewind into DEVICE::close().
-kes Eliminate close_device.
-kes Convert several dev subroutines to methods (e.g. bsf,
- eod, ...)
-kes Eliminate force_close_device().
-kes Implement Device Type directive in Device resource that
- can have values File, Tape, Fifo, DVD, or Prog.
-kes Add has_cap() method to Device.
-Changes to 1.39.4
-17Jan06
-kes Add patch from bug #527 to allow RedHat user to specify
- options/user/group for starting each daemon in
- /etc/sysconf/bacula.
-16Jan06
-kes Add two new queries to query.sql provided by Arno. One
- list volumes known to the Storage device, and the other
- lists volumes possibly needing replacement (error, ...).
-15Jan06
-kes Add periodic (every 24 hours) garbage collection of memory
- pool by releasing free buffers.
-14Jan06
-kes Correct bug counting sized (for display only) in smartall.c
-kes Print FD mempool stats if debug > 0 rather than 5.
-12Jan06
-kes Make db_lock() mutex error fail the job rather than abort
- Bacula. Canceling the job caused the mutex to fail.
-kes Correct bug in alist.c that re-allocated the list if the
- number of items goes to zero.
-kes Move the reservation system thread locking to the top level
- so that one job at a time tries all possible drives before
- waiting.
-kes Implement a reservation 'fail' message queue that is built
- and destroyed on each pass through the reservation system.
- These messages are displayed in a 'Jobs waiting to reserve
- a drive' list during a 'status storage='. Note, multiple
- messages will generally print for each JobId because they
- represent the different problems with either the same drive
- or different drives. If this output proves too confusing
- of voluminous, I will display it only when debug level 1
- or greater is enabled in the SD.
-11Jan06
-kes Add enable/disable job=<job-name>. This command prevents
- the specified job from being scheduled. Even when disabled,
- the job can be manually started from the console.
-kes During 'update slots' clear all InChanger flags where the
- StorageId is zero (old Media records).
+Beta Release 2.5.42-b2
+16Mar09
+kes Increase timeout for unmounting DVD as suggested by reporter
+ of bug #1250.
+15Mar09
+jh Fix by James Harper to print error code when attempting to
+ restore two databases (only one is permitted). This responds
+ to bug #1234.
+kes Apply the nodump patch supplied by Frank Kardel that fixes
+ the NODUMP flag problem. This fixes bug #1221
+kes Add more output if a user attempts to clone a job but does not
+ uniquely specify the Job name. This responds to bug #1248 which
+ was not a bug, but improves user feedback.
+14Mar09
+kes Fix problems with bug #1247 and 64 bit time_t OSes by not
+ editing (printf) time_t values.
+12Mar09
+kes Install bacula (start/stop script) in sbindir in addition to
+ scripts dir.
+ebl Tweak configure to remove bash specific code
+ebl Remove TCABD reference
+11Mar09
+ebl Free lock manager in when btape exits
+09Mar09
+kes Apply patch from bug #1224, which fixes waiting on max Storage
+ jobs during migration. Submitted by Alexandre Simon.
+kes On 03Mar08 (a year ago) applied patch from bug #1059 (kardel)
+ to implement the NODUMP flag on FreeBSD.
+07Mar09
+kes When deleting a Volume by MediaId require the Id to be
+ prefixed by a * to avoid confusing with an integer volume
+ name.
+kes Prevent bls from printing binary data when a plugin stream
+ encountered. This fixes bug #1238
+kes Prepare to add JS_Warnings termination status.
+kes Attempt to resolve bwx-console Win32 crash. Not likely to
+ work.
+06Mar09
+kes Move src/win32/dll to src/win32/lib, which is much more logical.
+kes Fix the Win32 build.
+kes Fix broken casting in src/compat/print.cpp.
+kes Eliminate jcr Errors and always use jcr JobErrors. This should
+ ensure that SD and FD errors are correctly reported. Also add
+ JobErrors to SD returned values. This should fix bug #1242.
+28Feb09
+mvw Implemented xattr support for Solaris 9 and above and extensible
+ attributes for OpenSolaris.
+mvw Added some limits to the xattr code so that we don't blow up the
+ filed on big xattrs.
+mvw Fixed some comments which changed due to xattrs being implemented.
+mvw Changed xattr support checking in configure to test first for
+ generic solutions and when not found for specific OS functions.
+25Feb09
+mvw Don't try to copy empty jobs (e.g. with jobbytes == 0)
+ which gives Unable to get Job Volume Parameters errors.
+ Which leads to copying the same job over and over again.
+21Feb09
+kes Ensure that src/qt-console/.libs is cleaned properly
+20Feb09
+mvw Use acl_data_len instead of seperate var for length
+ of acl stream.
+ebl Add database update scripts to updatedb dir
+19Feb09
+ebl Fix #1226 about bconsole segfault when using readline()
+18Feb09
+kes Apply Eric's next-beta.patch that enables 64 bit FileIds and
+ adds new columns to the catalog.
+kes Ensure that libtool directory always cleaned + reduce
+ unnecessary output during make clean.
+15Feb09
+ebl Check postgresql database encoding that should be SQL_ASCII
+ and print a warning if it's something else.
+08Feb09
+kes Free name item in guid_to_name.c when already in list.
+kes Add more info to error message in ua_tree.c
+05Feb09
+kes Make re-read last block fatal if block numbers differ by
+ more than one.
+30Jan09
+ebl Try to disable _FORTIFY_SOURCE by default
+29Jan09
+ebl Tweak compat.h for new mingw
+28Jan09
+ebl Add new ScratchPool directive to Pool. Thanks to Graham
+ebl Turn on db_get_file_list() single SQL because the failure
+ was due to a full FS. And the accurate test fails with the
+ other code.
+27Jan09
+ebl Fix a bug that doesn't update RecyclePool all the time
+ during the first startup.
+25Jan09
+kes Turn off db_get_file_list() giant SQL because if fails on
+ my production machine.
+kes Fix bat.pro.in so that bat is properly installed rather
+ than just copied.
+24Jan09
+kes Modify search for .conf file so that if one is given on
+ the command line, it will be used, otherwise it will use
+ the SYSCONF directory. It will no longer look in the current
+ directory unless explicitly requested on the command line.
+ This fixes bug #1189.
+kes Fail a job that references a plugin if no Plugin Directory is
+ defined.
+22Jan09
+kes Fix bug #1211 crash during reload with bad dird.conf file.
+21Jan09
+ebl Add detection of intptr_t and uintptr_t to configure process
+20Jan09
+ebl Change some cast to use intptr_t instead of long
+18Jan09
+kes Apply acl_solaris_update.patch submitted by Marco (thanks).
+kes Remove configure check for resolv.h -- it is apparently not needed
+ and causes build warnings on FreeBSD.
+kes Ensure that the installer and newinstaller Makefiles are called
+ during a make clean.
+12Jan09
+kes Apply Eric's fix for suppressing extended attributes error messages
+ when dealing with deleted files.
+11Jan09
+kes Add src/win32/newinstaller -- single file installer
+kes Attempt to explicitly call gmake when needed, or if not found
+ skip the calls. This should fix the FreeBSD regression/build.
+10Jan09
+kes Fix bat.pro.in so that bat will install.
+09Jan09
+kes Add more debug output to VSS init.
+kes Attempt to correct win32 debug in berrno.
+09Jan09
+kes Fix bug reported by Dan where make fails in clean of src/win32.
+07Jan09
+kes Fix bug #1212, SD is unable to recycle purged volumes. fstat()
+ was broken.
+06Jan09
+ebl Despool attributes directly from the director if attribute
+ spool file is present
+Beta Release 2.5.28-b1
+05Jan09
+kes Fix bat install broken by $DESTDIR change.
+02Jan09
+kes Fix annoying compiler warnings in console/conio.c
+kes Fix win32 build (depended whether or not ./configure was run).
+28Dec08
+kes Apply fix suggested by Bruno Friedmann to configure.in to
+ find python2.5
+26Dec08
+kes Turn on Eric's match_bsr tape block checking code.
+kes Correct values used for tape block numbers in record.c.
+23Dec08
+ebl Fix a problem with PoolUncopiedJobs option which was broken
+ by the new JT_JOB_COPY type.
+kes Fix bug #1206 -- Error: sql_update.c:194, which was probably
+ caused by the user modifying the Bacula DB schema.
+kes Remove rogue line of C code.
+kes Fix bug #1208
-Beta release 1.38.4:
-09Jan06
-kes Fix autochanger code to strip leading spaces from returned
- slots number. Remove bc from chio-changer.
-kes Back port a bit of 1.39 crypto code to reduce diffs.
-kes Fix first call to autochanger that missed close()ing the
- drive. Put close() just before each run_program(). Fixes
- Arno's changer bug.
-07Jan06
-kes Add PoolId to Job record when updating it at job start time.
-06Jan06
-kes Pull in more code from 1.39 so that there are fewer file
- differences (the new ua_dotcmds.c, base64.h, crypto.h
- hmac.c jcr.c (dird and lib) lib.h md5.h parse_conf.c
- util.c. Aside from ua_dotcmds.c these are mostly crypto
- upgrades.
-kes Implement new method of walking the jcr chain. The
- incr/dec of the use_count is done within the walking
- routines. This should prevent a jcr from being freed
- from under the walk routines.
+Beta Release 2.5.28-b1
+02Jan09
+kes Fix annoying compiler warnings in console/conio.c
+kes Fix win32 build (depended whether or not ./configure was run).
+28Dec08
+kes Apply fix suggested by Bruno Friedmann to configure.in to
+ find python2.5
+26Dec08
+kes Turn on Eric's match_bsr tape block checking code.
+kes Correct values used for tape block numbers in record.c.
+23Dec08
+ebl Fix a problem with PoolUncopiedJobs option which was broken
+ by the new JT_JOB_COPY type.
+kes Fix bug #1206 -- Error: sql_update.c:194, which was probably
+ caused by the user modifying the Bacula DB schema.
+kes Remove rogue line of C code.
+kes Fix bug #1208
+Beta Release Version 2.5.26
+20Dec08
+kes Correct typo in Win32 Makefile editing
+kes Correct typos in debug output.
+kes Improved error detection in creating bsrs.
+kes Add debug code to Win32 restore
+19Dec08
+kes Fix Win32 build.
+ebl Cleanup director VolParam struct
+18Dec08
+ebl Replace File:Block in BSR by Address to fix #1190
+16Dec08
+kes Correct missing return in Darwin code.
+15Dec08
+ebl Copy joblog after a Copy job
+14Dec08
+kes Tweak block.c read to more closely simulate write for computing
+ block addresses and turn on disk block testing.
+kes Implement a crude 'list joblog' mostly for debugging.
+13Dec08
+kes Fix Migration bug #1206 sql error with NULL FileSetId when no jobs
+ to migrate.
+kes Fix Migration JobLog bug #1171. Get the JobIds correct.
+12Dec08
+ebl Fix segfault in bscan when using debug mode
+11Dec08
+kes Fix configure to do minimum Win32 configure so that make clean
+ works.
+kes Tweak modify FD header to use %ld instead of %d.
+kes Remove hand scanning of FD header in SD and use Bacula's
+ sscanf, which is now OS independent.
+kes Define new object (file/dir) begin and end Volume label records
+ in SD.
+kes Use new method of defining XATTR #defines to avoid need for having
+ them in config.h.in
+10Dec08
+ebl Rename all STREAM_ACL_..._T into STREAM_ACL_..
+09Dec08
+ebl Add a new lock manager that can detect deadlock situation
+ This new option is activated with a --enable-lockmgr configure
+ option.
+ebl Add new Director->MaxConsoleConnections directive
+03Dec08
+ebl Fix bacula-sd hanging after tape gets full + unload
+02Dec08
+ebl Remove extra db_lock() in get_prune_list_for_volume()
+ebl Apply 2.4.3-prune-deadlock.patch that fixes a problem when
+ using Catalog as message backend.
+01Dec08
+kes Apply Marco's Darwin xattr patches.
+28Nov08
+kes Fix Win32 build.
+26Nov08
+kes Apply Marco's Extended attribute support patch.
+kes Update projects file
+25Nov08
+kes More changes to ensure that during thread switches the jcr
+ is removed from the TSD.
+kes Ensure that consoles attach jcr to thread, and that only the
+ thread attached is removed from the TSD.
+24Nov08
+kes Move definition of FileId_t to bc_types and define it once in the jcr.
+22Nov08
+kes Remove all time_t from arguments in favor of utime_t, which is
+ machine independent.
+kes Add more debug to match_bsr.c and use %u for unsigned debug editing.
+20Nov08
+ebl Apply patch for bug #1182 about Recycle flag
+ that is not updated after a pool change.
+kes Since the user has been warned, allow console purge command
+ to purge volumes that are in use.
+kes Fix Win32 build to add new sd_plugins.c
+ebl Apply patch from bug #1175 that reset the Slot and the Inchanger
+ flag in db_make_inchanger_unique().
+ebl Remove a Emsg() after recieving a Fatal signal that can lock
+ the catalog.
+19Nov08
+kes Apply patch from bug #1187. It prints an error message if the
+ Maximum Block Size in the SD is too big.
+kes Increase Maximum Block Size to 2,000,000 bytes.
+kes Use doubly linked bsr list so that consumed bsrs may be
+ removed. Removing not yet implemented.
+18Nov08
+kes Implement a fix that very likely fixes the undesired volume
+ purge reported by Graham Keeling.
+kes Implement bsr block level checking for disk files. However,
+ it does not work correctly in accurate tests, and all the
+ migration and copy tests, so it is turned off.
+ebl Make SD plugins work.
+14Nov08
+ebl Apply Riccardo's patch to compile bacula+mysql on mandriva
+13Nov08
+ebl Add more variables accessible through the director plugin
+ interface.
+12Nov08
+ebl Do work on plugins
+ - fix compilation of the director plugins
+ - add plugin list to status dir output
+ - add director plugin dump after a fatal signal
+ebl Apply Riccardo's patch that fix some win32 compilation errors
+ and a bug with bat version browser.
+11Nov08
+ebl Add Plugin debug after a fatal signal.
+ebl Add db and rwlock debug after a fatal signal.
+10Nov08
+ebl Fix maxwaittime to fit documentation, this time is now counted
+ from the job start and group all wait periods.
+ebl Add tips for postgresql to improve performance when having
+ multiple batch insert at the same time.
+09Nov08
+ebl Remove extra debug for db lock.
+07Nov08
+kes Apply Riccardo's second patch that cleans up the #include
+ file order + a few Win32 particularities to make bat work
+ on Win32.
+ebl Add allow_transactions flag to mysql db backend.
+kes Apply win32-fixes patch from Riccardo that makes the Win32
+ bat more stable and faster (but still slow).
+06Nov08
+kes Fix bug with job name duplication if more than 60 jobs created
+ during a minute.
+kes Correct some bugs of cleanup in SD if the FD connection fails.
+ebl Add code to get more information after a fatal signal.
+05Nov08
+ebl Apply Bastian's patch that add spooldata=yes|no option
+ to run command.
+04Nov08
+ebl Fix bash shell to sh shell in database creation script
+02Nov08
+kes Fix orphaned jobs (possible deadlock) while pruning.
+kes Use jcr stored in bsock rather than searching in getmsg.c.
+ This results in about a 5% speed improvement with four
+ concurrent jobs.
+kes Implement win32_chmod that uses wide characters, if possible,
+ to get and set the file attributes.
+29Oct08
+kes Apply pane freezing during updates patch from Riccardo Ghetta.
+kes Rework next_vol and autoprune a bit due to failure in
+ recycle-test. prune_volumes() now returns no status,
+ but should prune at least one Volume, if possible.
+kes Modify check_if_volume_valid_or_recyclable to reject a
+ volume with Recycle set off.
+kes Modify prune_volumes() to continue if volume Recycle is off
+ or if the volume has expired. Add more debug.
+28Oct08
+kes Fix bug #1046 VolumeToCatalog incorrectly reports mounted
+ filesystems as missing on the Volume.
+kes Rewrite the set_jcr_job_status() code to include job status
+ priorities so that more important status changes occur but
+ lower priority status changes will not overwrite something
+ more serious. This could possibly cause reporting incorrect status
+ reporting in some cases. More testing is needed to ensure
+ I have the right priorities. This vastly simplifies the previous
+ contorted logic.
+ Verify Diff status should now be correctly reported, whereas it
+ was previously lost.
+kes Reduce some debug output.
+kes Apply Joao's patch to SQLite tables to make chars work.
+27Oct08
+ebl Fix #1175 About update slots that don't reset InChanger flag when
+ slot is empty.
+ebl Fix #1173 where prune_volume() returns a volume from the scratch.
+25Oct08
+kes Remove jobq.c constraint that read and write SD must be
+ different. This may lead to more deadlocks in the SD,
+ but they should be resolved there.
+kes Ensure that job report is always printed even if job is failed
+ in the director.
+kes Don't print job report twice for failed VBackup jobs.
+24Oct08
+kes Fix editing of retention time difference to use 64 bit
+ int instead of 64 bit unsigned. This should permit very
+ long retention periods.
+kes Implement code to prohibit a write job from appending to a
+ Volume that will be used for a read operation. This is
+ new code and could possibly cause some conflicts.
+23Oct08
+kes Integrate James Harper's Exchange Win32 plugin patch.
+kes Apply patch from Marco van Wieringen that implements the new
+ Solaris libsec interface for ACLs so that Bacula can save and
+ restore both the new ACLs and old ACLs.
+kes Marco's patch also corrects the file dependency generation code
+ so that it works properly both with shared libraries and static
+ libraries.
+kes Marco's patch also includes a small cleanup of the cats Makefile
+ to remove some references to non-existent files.
+22Oct08
+kes Modify win32 Makefiles to use full paths in most cases.
+ In particular add MAINDIR environment variable that points
+ to the main Bacula source directory.
+21Oct08
+kes Add read volume list code to SD -- not yet used.
+kes Add James' binutils patch
+kes Split volume management code out of src/stored/reserve.c into
+ a new file vol_mgr.c
+kes Modify configure to do an automatic make clean. This ensures
+ that any changes to ./configure options are handled correctly.
-Changes to 1.39.3:
-04Jan06
-kes Start implementing Verify list output.
-kes Move the suitable_drive flag to a better place to prevent
- premature termination of the reservation if all drives
- are busy -kes should fix Arno's diff/inc pool failures.
-26Dec05
-kes Add mutex to single thread VSS code in Win32.
-22Dec05
-kes Simplify code in askdir.c that waits for creating an appendable
- volume so that it can handle multiple returns from the wait
- code.
-kes Modify the wait code to permit multiple returns.
-kes Return a zero when 'autochanger drives' is called and
- it is not an autochanger.
-kes Make rewind_dev() a method taking a DCR as an argument.
- This permits closing and reopening the drive if the
- rewind fails as happens if the drive was loaded while the
- file descriptor was open. This refreshes the file descriptor.
-kes Remove the ST_OPENED flag and always rely on fd < 0 for knowing
- if the device is open or not. This should eliminate
- Arnos problem.
-kes Return error if reserve cannot find at least one suitable device.
-kes Make wait_for_sysop() return correct state information.
-kes Fix Win32 state file problem. write was not using compat
- code. This should fix bug #500.
-21Dec05
-kes Modify gui on command to set only GUI mode and not batch.
-kes Modify .messages command to always print messages regardless
- of the mode.
-kes If GUI mode is on, suppress automatic printing of
- You have messages.
-kes Delete old bnet packet code.
-kes Ignore new BNET_START_SELECT and BNET_END_SELECT signals in
- wx-console. -kes not implemented because bconsole must be updated.
-kes Modify restore command in wx-console to set gui on and to use
- only .messages instead of messages. Hopefully this fixes bug
- #514.
-kes Fix seg fault in exit of acquire when canceling a job --
- reported by Wolfgang Denk
-kes Pull in latest reservation system changes from 1.38
-kes Make .messages command always print messages regardless
- of the automessages flag.
-17Dec05
-kes Fix seg fault if user labels a drive directory bug #513
-kes Remove quotes around Version as it breaks things.
-16Dec05
-kes Merge in Aleksandar Milivojevic's mods to the spec file.
-kes Apply sparse code fix for raw drives and fifos. Bug 506
-kes Thorsten fixed Unicode cd problem with wx-console bug 505.
-14Dec05
-kes Correct reservation system to do a last ditch try
- for any mounted volume, then anyone anywhere.
-kes Add quotes around table Version because of
- error in MySQL 4.1.15 -kes bug report submitted.
-kes Correct some minor problems with btape in the fill
+Beta Release Version 2.5.16
+19Oct08
+kes Add Makefile dependency when using LIBTOOL_LINK so that any
+ change in ./configure options will be accounted for.
+18Oct08
+kes Fix typo in the ACL patch that I overlooked.
+kes Apply Marco's libtool include patch.
+17Oct08
+kes Apply Bastian Friedrich's ACL patch to eliminate ACL
+ errors during restore.
+kes Minor cleanup of create_restore_volume_list() code.
+kes Fix typo in console Makefile.in
+16Oct08
+ebl Fix #1110 about RunScript that can't execute a script with
+ Unicode caracters in the path.
+15Oct08
+kes Apply tray-monitor patch from Bastian Friedrich to make it
+ work with the new FD.
+14Oct08
+kes Apply cleanup patch from Marco
+kes Apply patch from Marco van Wieringen <mvw@planets.elm.net>
+ that implements libtool to create shared objects out of
+ the Bacula libraries.
+kes Fix tray-monitor so it will speak to new FD.
+ebl Fix bug with ansi label when volume name length < 6
+ebl Fix segfault in debug level > 50 with btape.
+ebl Remove warning message in btape when command is empty.
+kes Fix Win32 build to pull in new BACULA define.
+13Oct08
+kes Change IncludeDir to Exclude Dir Containing.
+kes Implement code to prohibit ExcludeDirContaining in an
+ Exclude section (same for Plugin and Options). A bit
+ of a kludge with RES_ITEM2 ...
+ebl Add field to command list to restrict Runscript console
command.
-kes Updates to ssh-tunnel from Joshua Kugler.
-kes Added a report.pl program from Jonas Bjorklund.
-kes Simplify the O_NONBLOCK open() code for tape drives,
- and always open nonblocking.
-kes Do not wait for open() if EIO returned (shouldn't happen).
-kes Eliminate 3 argument to tape open().
-kes Correct the slot # edited in the 3995 Bad autochanger unload
- message.
-kes With -S on bscan (show progress) do not divide by zero.
-13Dec05
-kes Make cancel pthread_cond_signal() pthread_cond_broadcast().
-kes When dcr is freed, also broadcast dev->wait_next_vol signal.
-kes Remove unused code in wait_for_device.
-kes Make wait_for_device() always return after 60 seconds of wait.
+ebl Use a separate JCR when running Console command with Runscript.
+ebl Permit to mark version as Beta in some ouputs
+11Oct08
+kes Add plugin types in jcr.h to reduce need to cast.
+kes Do better checking of plugin return values.
+kes Free plugin context after calling pluginFree() as
+ requested by James.
+kes Allow plugin to call JobMessage with NULL context.
+kes Do not add plugin to global list if loadPlugin returns error.
+kes Rework plugin.h a bit to reduce dependence on Bacula.
+10Oct08
+kes Move generation of bsr file for Virtual Backup to run section
+ so that it is generated just before actually running.
+ Suggested by Graham Keeling.
+09Oct08
+kes Add malloc and free Bacula entry points for plugins. Increment
+ FD plugin interface version. Create a bacula plugin context
+ structure to keep track of whether or not the plugin is disabled.
+kes Apply FileIndex fix for plugin name stream suggested by James.
+kes List plugins in FD status report when debug > 0.
+08Oct08
+ebl Add a new VerId variable that is printed in version command.
+kes Fix migration SQL not to migrate a job that has not terminated.
+ This is a partial fix to bug #1164.
+kes Sort JobIds returned from db_accurate_get_jobids() to fix Virtual
+ backup start time bug reported by Graham Keeling.
+08Oct08
+ebl Fix possible bug in cancel_job() with job that are not
+ yet created.
+07Oct08
+kes Fix bat build for Win32.
+06Oct08
+kes Copy plugin link field into ffpkt.
+05Oct08
+kes Integrate patch from Kjetil Torgrim Homme <kjetilho@linpro.no>
+ It provides FileRegex in bsr files and code to collect regex
+ from the user during restore, an Allow Mixed Priorities feature,
+ and documentation for the above.
+ebl Remove db berkeley from configure process
+kes Do dirty check on hostname (Linux only) and if not resolvable
+ use localhost as default.
+kes Increase vtape max block to 20GB.
+04Oct08
+kes Refactor restore code to create a close_previous_stream(). This
+ This may destabilize the source.
+kes Implement planned startRestoreFile() plugin call.
+ebl Remove missing Loaded information from status slots storage command.
+ebl Fix Console command problem that cancels the job
+kes Add more plugin restore debug code.
+03Oct08
+kes Fix plugin_bwrite - plugin-blseek mixup pointed out by James.
+kes Rewrite plugin restore interface a bit to correspond to how Bacula
+ creates and writes to the restored file.
+kes Add some DebugMessage() calls to the bpipe-fd.c program.
+30Sep08
+kes Apply Marco van Wieringen's set of patches, cleans up Migration/Copy
+ Implement 'Pool Uncopied Jobs', allow Solaris Compiler to build
+ Bat; allow add and delete in place of mark and unmark.
+kes Another attempt to fix the endRestoreFile plugin bug noted below.
+29Sep08
+kes Apply dbi driver patch from Joao.
+kes Correct a bug in passing the context to the endRestoreFile() plugin command.
+ Bastien Friedrich reported the bug.
+kes Create plugin instance only when FD job starts.
+kes Add new FD plugin event: bEventCancelCommand when
+ a cancel command is issued to the FD.
+28Sep08
+kes Add cmd_plugin flag to jcr so we can globally know if a
+ command plugin is running.
+kes If command plugin running, do not attempt (for the moment)
+ to get Win32 extended attributes.
+kes Ensure that proper Win32 flags are set in bfile packet
+ if plugin_bopen() works on Win32.
+kes Remove generated src/plugins/fd/Makefile
+27Sep08
+kes Implement build and install of bpipe-fd.so plugin.
+kes Rework the interface that passes packets to the plugin
+ so that the packet is started and ended by the packet size.
+ This allows the driver to do a sanity check.
+26Sep08
+kes Rework the pluginIO Bacula internal code to enable
+ proper handling of Win32 error codes from GetLastError.
+kes Apply Joao's patch to regress startover_libdbi.
+25Sep08
+ebl Add -B option to dbcheck to get catalog information
+kes Fix Win32 build to include new library function.
+kes Remove some old reader/writer code.
+kes Implement ./configure --with-plugindir=xxx
+ebl Fix the mysql bug in the new accurate code
+kes Improve plugin debug. Create plugin test.
+kes Set main thread specific data to INVALID because it
+ has no jcr. This allows debug output to work correctly.
+kes Add src/plugins/fd/Makefile to ./configure process.
+kes Make first cut attempt to correct SQL that computes the current
+ Pool usage. This is to fix bug #1159.
+kes Do a bunch of plugin cleanups for Win32 and more careful checking
+ of PluginDirectory and whether or not a plugin was found.
+24Sep08
+kes This code should fix the race condition that leads to a Director
+ crash at job end time when the job list is updated. This was reported
+ in bug #1162.
+kes Add more plugin documentation and fix include of config.h for
+ Win32 build (I hope).
+22Sep08
+ebl Revert to htable instead of rblist
+ebl Cleanup accurate code (remove tcdbm parts) and use red/black
+ tree instead of htable.
+ebl Use a dedicate DB link to compute and send the accurate list
+ file to the client.
+21Sep08
+kes Fix compile errors in filed/fd_plugin.c.
+20Sep08
+kes Remove all double quotes from SQLite creating script and
+ replace by single quotes as suggested by John Huttley.
+18Sep08
+kes Apply dbcheck patch from Yuri Timofeev <tim4dev@gmail.com>.
+ It significantly improves the performance of dbcheck for
+ MySQL.
+kes Fix bad debug code call in src/filed/accurate.c
+17Sep08
+kes Change two Jmsgs in accurate to Dmsg to reduce unnecessary
+ output. Perhaps we really need to implement M_SAVED.
+16Sep08
+kes Fix bug #1156 FD crash during processing of Accurate data.
+kes Tweaks to htable code to improved debugging and make names
+ a bit more meaningful.
+15Sep08
+ebl Remove time_t from update_stats()
+14Sep08
+kes Modify the license of the example plugin program to allow
+ it to be used by anyone for making a Bacula plugin.
+kes Make apply_rp_codes() in bpipe-fd.c be static.
+13Sep08
+kes Remove Encryption and Accurate lines in vbackup output -- not used.
+kes Fix subtle bug in vbackup by not changing DEV_RECORD packet.
+kes Add host name to items printed during dump.
+kes Make Check File Changes default on.
+11Sep08
+kes Set the default FD timeout to 3 minutes (previously 30).
+kes Apply Bastian Friedrich's weird spelling correction patch.
+10Sep08
+kes Always print Verify hash differences. Rename variable to make the
+ code slightly more readable.
+09Sep08
+kes Correct tests for MaxFullInterval as reported by
+ Ulrich Leodolter <ulrich.leodolter@obvsg.at>..
+kes Fix MaxDiffInterval code as well.
+kes Enable Win32 plugin load code in lib.
+kes Make Verify code that computes disk checksums use the same
+ algorithm as backup when dealing with sparse files.
+kes Attempt to run VSS on any systems newer than Vista -- should
+ make it work on Windows Server 2008.
+ebl Change the new statistic implementation. Remove the UseStatistic
+ directive and add a 'update stats [days=...]' command. You can
+ now decide when copy job records from Job table to JobStat.
+ Statistics are much more accurate with this.
+08Sep08
+kes Fix SQL case problem that may cause the failure of DiskToCatalog
+ in bug #1149.
+kes First cut adding SD plugins.
+03Sep08
+kes Add Slot if it is non-zero to writing bsr file after a
+ backup.
+kes Change a number of bnet_fsend() into class method calls.
+kes Begin audit of diff of 2.4 branch to trunk code.
+01Sep08
+ebl Fix the mysql creation script that double-created an
+ index of the same field on the Media table.
+ Add an index to on VolumeName to the Media table for mysql.
+30Aug08
+kes Another try at fixing Vbackup. It looks much better this time.
+ Disable file index sanity check in FD with value stored in
+ attributes record because with Vbackup the File Index gets
+ changed, but not the attributes record.
+ Enhance some debug code.
+ Fix handling of re-indexing records that are copied in Vbackup.
+29Aug08
+kes Made level_to_str() know about Virtual backup.
+kes Set correct Virtual backup write pool.
+kes Fix compile warning in new dbcheck port code.
+kes Fix migration code broken by previous virtual backup fix.
+28Aug08
+kes Fix problem of Virtual backup not writing a sequential FileIndex.
+kes Reset Virtual backup time/date to the value from the last backup.
+kes Ensure that storage name is passed to SD on read.
+kes Correct a problem with Level and Virtual backup, rework how
+ bsrs are printed in debug to use standard routine.
+kes Apply patch from Chris in bug #1133 that provides alternate db port
+ support for dbcheck.
+ebl Remove catalog dependency from bcopy tool.
+ebl Modify catalog scripts to have an easier packaging integration,
+ using default variables.
+ Make difference between SQLite3 and SQLite in db_get_type()
+27Aug08
+kes Apply most of changes in a patch from:
+ Michael Stapelberg <michael+bacula@stapelberg.de>
+ that allow the Bacula FD to compile on IRIX 6.5.
+26Aug08
+kes Apply patch from Bastian Friedrich that accepts a yes on a
+ delete volume command line.
+kes Attempt to fix bug #1128 InChanger flag cleared during Migration
+ job when reading from one autochanger and writing to another.
+kes Minor tweaks (copyright dates convert to use method instead of bnet).
+21Aug08
+kes Fix NULL Volume error when reading (or Migration or VBackup) must switch
+ drives when no tape is mounted.
+18Aug08
+kes Add additional info to some SD messages.
+kes Add fix supplied by Martin Simmons for turning off EOL character
+ in new console multi-command code.
+14Aug08
+kes Fix a Verify InitCatalog problem where in certain cases
+ a garbage filename may be entered in the verification database. This
+ fixes bug #1143.
+13Aug08
+kes Add VSS 64 bit dll entry point in src/win32/filed/vss_generic.cpp
+ sent in by Riyas Yoosuf.
+12Aug08
+kes Fix seg fault in Dir during estimate command with no level value
+ given. This fixes bug #1140.
+08Aug08
+kes Add message to migration job when the target job is already migrated.
+ This closes bug #1129.
+30Jul08
+kes Fix Win32 build.
+kes Raise some restore debug levels.
+kes Replace off_t by boffset_t where ever I found it.
+28Jul08
+kes Define a machine dependent ioctl request type for use with
+ vtape_ioctl().
+26Jul08
+kes When a migration job actually runs, re-check the Job record
+ and skip if the job is already migrated. This should
+ significantly reduce the problems with bug #1129.
+24Jul08
+kes Set MALLOC_CHECK_=0 in environment before starting Bacula to
+ turn off glibc checks that prevent getting good dumps.
+kes Implement console 'wait mount' command. Doesn't yet work.
+kes Implement timeout=nn on console 'wait mount timeout=nn' command.
+kes Break the do_swapping into do_unload, do_swapping, and
+ do_load. It is much more logical that way.
+kes Implement a set_dcr_from_vol subroutine in acquire.c for
+ reading volumes. This allows the dcr to be refreshed after being
+ zapped when the wrong volume is mounted.
+ This should fix bug #1126 -- During multiple tape restore, bacula
+ does not ask for physical tape change, but rereads same tape
+23Jul08
+kes Apply patch submitted for bug #1107 with a small modification.
+ This fixes a bug where bcopy copied too many records.
+kes Make some tweaks to bsmtp based on patch submitted in bug #1124.
+ This fixes bug #1124.
+kes Make the default bat restore Pool be Any. This fixes bug #1118.
+22Jul08
+kes Remove debug statement that crashes the SD at the end of
+ a tape during restore. Fixes bug #1125.
+21Jul08
+kes Implement Win32 bat changes made to Branch-2.4
+20Jul08
+kes Tweak separator command in console to start disabled and
+ allow defining no separator character. Also make code a
+ bit more fault tolerant.
+kes Make btraceback write the traceback to the working directory
+ before attempting to mail it.
+kes Add a RFC to Projects.
+18Jul08
+kes Attempt to implement a kludge to make Qt work with bat
+ on Win32.
+kes Setup rstorage correctly. Virtual backups are working.
+17Jul08
+kes Move setting JobLevel and JobType into a method, which should
+ allow completing Virtual Backups.
+kes Fix verify jobs to work again.
+16Jul08
+kes Virtual Backup tweaks -- it is close to working.
+15Jul08
+kes Ensure that SD tried to mount a volume not in an autochanger
+ at least once before asking for operator intervention.
+kes Make SD aware of Virtual Backup jobs.
+kes Add VirtualFull for bat.
+kes Changes to get read storage correct for Virtual Backup.
+14Jul08
+kes Remove old code from label.c
+kes Split display_display_info() out of write_bsr_file()
+kes do_vbackup_init() working -- i.e. bootstrap file built.
+kes Change Bacula trademark owner from John Walker to Kern Sibbald
+kes First non-working cut of vbackup
+kes Correct FD heartbeat code to use volatile variable accessed by
+ two threads.
+kes Zero thread id with memset if on Win32 in case it is a struct.
+kes If cannot create JobMedia record, continue to try to write eof
+ and clean up in block.c
+12Jul08
+kes Add code to interface OpenSSL to new Win32 pthreads code which
+ used a structure for thread_t.
+09Jul08
+ebl tweak bat for win32 compilation
+08Jul08
+ebl Remove tokyo cabinet from the source
+ebl Update configure/autoconf to support berkeley DB
+ebl Add a sort to db_get_file_list() to improve bsr construction time.
+07Jul08
+kes Add a mtx-changer.conf file that is not overwritten during
+ an upgrade. It fully configures the mtx-changer script.
+kes Clear in-use bit on vol when unused while swapping.
+06Jul08
+kes Remove sleep at end of ./bacula
+kes Clear hash packet for hardlinked files correctly. This corrects
+ a long standing bug where hardlinked files selected individually
+ would occasionally not be restored.
+05Jul08
+kes Apply Eric's patch to ensure that autoprune does not return
+ a Volume not in the autochanger unless requested to do so.
+kes Correct bat restore display of multiple drives. This fixes
+ bug #1117.
+kes Do find_a_volume() each time an unload is done. This
+ fixes the failure of maxvol2-test.
+04Jul08
+kes Add some SD debug code.
+kes Do find_a_volume() each time an unload is done.
+kes Apply Joao's DBI patch that adds easier configuration of DBI drivers,
+ and adds --with-db-port to ./configure.
+kes Use Qmsg() in job.c watchdog callback.
+03Jul08
+kes Release main control rwlock if ABORTing.
+kes Make watchdog connect timeout queue messages rather than sending
+ directly to avoid lock conflicts with the real thread.
+kes Add const char in dbd.c to avoid compiler warnings.
+kes Fix python compiler string warning. Note, IMO the GNU C++
+ compiler guys have made a *very* bad change to their compiler.
+ They now force all strings to be 'const' unless you explicitly
+ cast them, which is extremely ugly and ruins nice code as well
+ as creates a lot of useless work.
+02Jul08
+kes Fix mtx-changer to detect both versions of Ubuntu (Debian)
+ mt. This fixes bug #1116.
+kes Add const in python files to reduce compiler warnings.
+ This may have to be backed out because of later compiler
+ strict checking.
+kes Fix failure of 2drive-concurrent-test. Always read label;
+ clear_unload() only after drive is defined in acquire_for_read().
+27Jun08
+kes Generally clean up the manual tape loading code. The main
+ conceptual change is that when a volume is marked to be unloaded,
+ its volume name is retained, and it is only marked as unloaded
+ when either the autoloader says it is unloaded or another tape
+ is read on that drive.
+25Jun08
+kes Add debug code and refactor subroutine in stored/mount.c
+kes Fix format problem in bscan output reported in bug #1105.
+ebl Fix get_next_volume_for_append logic with autochanger
+ - use pruned volumes if found
+ - don't reset the inchanger flag after getting a recycled volume
+ or a scratch one
+ Fix recycle_oldest_purged_volume to take InChanger flag in account
+23Jun08
+ebl Add mmap/unmmap implementation for tokyodbm under win32
+22Jun08
+kes Make first step toward eliminating globals from config
+ scanning. Also should be a workaround for FORTIFY_SOURCE
+ GNU C bug -- fixes bug #1042.
+21Jun08
+kes Apply duplicate job tests to restarted jobs.
+kes Copy more data when restarting a job so that run
+ overrides are kept. This should fix bug #1094.
+20Jun08
+kes More word alignment cleanup.
+kes Fix bug where SD did not ask operator if the device could not
+ be opened. Reported by Eric.
+19Jun08
+kes Add dbuser to DIR conf file (replaces user).
+kes Add --with-db-password to ./configure
+kes Fix regress to handle db_password.
+ebl Add new 'status storage slots' that list autochanger
+ content.
+ebl Update vtape driver to compile only under Linux.
+ebl Fix a bug when restoring with a wrong mediatype.
+18Jun08
+kes Eliminate ints from conf files and structures to avoid
+ word alignment problems
+17Jun08
+kes Fix bug reported by Scott Barninger where the bacula script
+ refers to scripts in the wrong directory. Needed to meet the
+ requirements of recent FHS location changes.
+ebl Disable vtape for FreeBSD.
+15Jun08
+ebl Modify disk-changer to check if slot contains something before
+ loading it.
+14Jun08
+ebl Fix vtape on win32 and debian.
+ebl Fix autoselect patch (cause segfault).
+13Jun08
+ebl Fix autoselect option broken for a while. Fix #1089. Need some
+ work with StorageId to be able to use a particular drive in a
+ autochanger.
+09Jun08
+ebl Rename vtape to vtape.
+ebl Update vtape driver.
+08Jun08
+ebl Modify vtape driver to avoid sparse file.
+kes Add make clean of qt-source directory during ./configure
+kes Store last block number written to tape in DEVICE and
+ use it for testing for correct last block on EOT.
-Changes to 1.39.2:
-13Dec05
-kes Add stubs for non-crypto build.
-12Dec05
-kes Use localhost if no network configured
-11Dec05
-kes Eliminated duplicate MaxVolBytes in cat update -kes bug 509.
-kes Remove debug print.
-kes Add bail_out in error during state file reading.
-10Dec05
-kes Merge changes made to 1.38.3 into HEAD
-kes Add stubs for pygtk-console code
-kes Create Makefile.in for pygtk-console code
-09Dec05
-kes Merge updates into 1.38 branch
-kes Update specs to include mysql4 define.
-kes Fix when attributes are sent, must be after binit().
-kes Stop read_record() if status not ok in second loop.
-kes Return rec->FileIndex in dcr->VolLastIndex for normal
- and partial records in read_record(). This allows bscan
- to get FileIndex at EOT correct.
-kes Fix butil.c to correctly set dcr -kes fixes seg fault in bls.
-08Dec05
-kes Fix Win32 built to work with new crypto code.
-kes Apply patch supplied by user (slightly modified) to fix
- correct detection of holes in block devices and FIFOs.
- Bug # 506.
-kes Apply patch supplied by user (slightly modified)
- to fix SD hang with multiple pools and bad client
- IP. Fixes bug # 508.
-07Dec05
-kes Add nagios plugin to the examples directory. Submitted by
- Christian Masopust.
-kes Remove warning message about multiple saves of hardlinked files
- from find_one.c as it can generate too many warning messages.
-kes Modify most restore error messages to be queued so that they
- appear at the end of the job rather than mixted with the restore
- listing where they could be 'lost'.
-06Dec05
-kes Reset timeout values before select() per patch from
- Frank Sweetser for problems with non-blocking sockets.
-kes Unlink the state file if either reading or writing it gets
- errors. Hopefully this will fix Win32 exit problems.
-kes Add sanity check in append.c to ensure that dcr is not NULL.
- This can happen if multiple drive autochanger SCSI control
- channel and drive indicies do not correspond.
-05Dec05
-kes Get next volume from Scratch pool before creating a volume.
-kes Set new Pool defaults in Vol when moved from Scratch Pool.
-kes Remove argument from create_bacula_database for SQLite as it
- caused an error.
-kes Add back index code so that two drive autochangers can get
- a second tape.
-kes Change a bunch of debug levels to aid debugging autochangers.
-kes Fix reservation so that mutexes are properly applied.
-kes Rework reservation algorithm so that two drives can be used
- at the same time.
-04Dec05
-kes Landon merged his data encription changes into the HEAD
-kes Apply days keyword patch from Alexander.Bergolth at wu-wien.ac.at
- If this patch is applied, the number of days can be specified with
- 'list nextvol days=xx'
- or
- 'status dir days=xx'
- My use case is to be able to preview the next scheduled job (and the
- next tape to be used) on fridays if there are no scheduled jobs during
- the weekend.
-Changes to 1.39.1:
-03Dec05
-kes Fix font code in gnome2 console user patch. Fixes bug #501.
-kes Fix malformatted bnet error message that caused seg fault
- fixes bug 502
-kes Applied user patch to improve README.vc8 in src/win32.
-29Nov05
-kes Add Migrate, Copy, Archive Job types (some where there)
-kes Correct some more editing of JobId's (for 64 bit compatibility).
-kes Ensure that StorageId is stored in Media record when ever possible.
-kes Add Migration Job to Job.
-kes Add Migration Time, Migration High Bytes, Migration Low Bytes
- Next Pool to Pool resource.
-kes Add more code to mac.c (migration archive copy).
-kes Change Start Storage daemon job to require read and write storage
- pointers.
-kes Pass read storage data to SD as well as write storage data.
-kes Remove old code from winservice.cpp
-kes Break on error in scan.
-kes Fix typo in signal.c
-kes Separate read/write DCR in SD. Add jcr->read_dcr.
-kes Cleanup how find_device() works.
-kes Add read output to Status in SD.
-Changes to 1.39.0:
-23Nov05
-kes Add red-black btree routines
-21Nov05
-kes Remove abs() in bfile.c so that it compiles on Solaris.
- Bug #491.
-20Nov05
-kes Fix crash in tray-monitor when daemon disconnects. Bug #479.
-kes Fix bnet-server bug found on OpenBSD. Bug #486
-kes Fix cancel failure bug. Bug #481
-kes Fix failure when Pool name has spaces. Bug #487
-kes Fix SD crash in autochanger code. Mutex failure. Bug #488
-kes Fix a couple of free()s in src/filed/acl.c
-kes Fix memory overrun in bfile.c in building OS X resource
- fork filename. Bug #489
-kes Add Pool name to SD status output.
-14Nov05
-kes Apply SunOS patch for ACLs submitted by David Duchscher.
-kes Make sure to set storage before trying to set drive.
-kes Add bacula_mail_summary.sh to examples directory. It makes
- a single email summary of any number of jobs. Submitted
- by Adrew J. Millar.
-kes Make sure when we do a mount to unblock the device even
- if the drive could not be opened.
-13Nov05
-kes Remove the USE_WIN32STREAMEXTRACTION #defines (always on)
- and correct a few minor problems to make it build on Linux.
-10Nov05
-kes Remove delete of CVS from all Makefiles
-kes Fix seg fault when clicking on Add button in wx-console
- restore panel. Bug #470.
-kes Fix copyright date and URL typo -kes bug #468.
-kes Change autostart install for FreeBSD to look for rc.conf
- rather than rc.local as suggested fix for bug #466.
-kes Apply patch supplied by Eric Bollengier to fix PostgreSQL
- grant on status. Bug #465
-kes Apply patch supplied by Eric Bollengier to fix PostgreSQL
- update script. Bug #464
-kes Tweak #ifdefing a bit in new Win32 stream code.
-kes Fix #ifdeffing for FD_NO_SEND_TEST.
-kes Add documentation of performance #defines
+28Dec08
+Release Version 2.4.4
+27Oct08
+Release Version 2.4.3
+26Jul08
+Release Version 2.4.2
+07Jul08
+Release Version 2.4.1
+04Jun08
+Release Version 2.4.0
+25Jan08
+Release Version 2.2.8