- Technical notes on version 1.39
+ Technical notes on version 2.2.x
General:
-Version 1.39.34 released:
-28Dec06
-kes Convert dbcheck to use 64 bit DB IDs.
-kes Update projects
-kes Make rescue work.
-kes Clarify Volume migration error message.
-kes Look for Job keyword when opening DB in console.
-23Dec06
-kes Add code in catreq.c to reject volumes not marked Enabled.
-kes Add a few more ACL access checks.
-kes Add \n in gnome2-console restore command so that output prints
- nicer -- i.e. lines do not run together.
-kes Fix autolabeling so that it will not mark a volume in error
- if the volume was not actually opened. This should fix bugs
- #737 and 738.
-kes Require tape drive to be open before autolabeling.
-kes Require explicit mount command on non-tapes before autolabeling.
-kes Implement an open_client_db() that searches the keywords for
- either a catolg or client, and opens the appropriate catalog.
- This makes Bacula adjust better to multiple catalogs.
-kes Use more name() methods for resources rather than hdr.name.
-22Dec06
-kes Fix code to check for two resources of same name. It forgot
- to check the last entry. Fixes bug #734.
-kes Apply scanvolume patch from Richard Mortimer that fixes bug
- #738.
-kes Apply Eric's patch for recycling the Scratch pool.
-kes Note, for the tray-monitor (or almost any restricted console_
- to work, in version 1.39.x you must add CatalogACL = catalog-name
-kes Add appropriate new #undefs to autoconf/acconfig.h so that
- configure works correctly.
-kes Implement configure code to allow the user to disable IPv6 with
- --disable-ipv6
-kes Apply Richard Mortimer's patch to prevent seg fault if mount point
- not specified -- SD refuses to start.
-kes Add magic.bacula from bug #715 to the scripts directory along with
- Arno's explanation of how to install it.
-kes Convert a bunch of hdr.name into name() method calls.
-kes Fix the code to remove .bsr files. Fixes bug #736 -- Martin.
+Beta Release Version 2.2.10-b2
+03May08
+kes Rework SD acquire for read to handle autochanger Volume
+ swapping.
+kes Implement regression that explicitly tests swapping a Volume
+ from one drive to another.
+kes Enhance disk-changer to detect most error conditions.
+kes Fix SD code so that it properly swaps a Volume between drives.
+ This fixes bug #1083.
+01May08
+kes Prevent a Volume that is being swapped from being freed from
+ the volume list. This will most likely fix, at least partially,
+ bug #1083.
+kes Fix strippath so that it does not get a buffer overrun and crash FD.
+ This fixes bug #1078.
+kes Make inability to change owner/group when creating a dir only a
+ warning rather than an error.
+28Apr08
+ebl Fix SQL query in migration code
+19Apr08
+kes Force unload of volume when wrong volume mounted in SD.
+17Apr08
+kes Fix bat seg fault at termination.
+kes Add Bacula generated version to bat about box.
-Version 1.39.32 released:
-20Dec06
-kes Take first catalog if gui is set, or if using dotcmd.
-kes Fix a couple of compiler warnings in wx-console
-kes Apply the immutable patch for FreeBSD hardlinked files supplied
- by Olivier Lehmann.
-kes Add Volume name to Forward spacing message.
-kes Update migration job start time (so it is not zero) to prevent
- immediate recycling of the job. This *should* fix bug #733.
-19Dec06
-ebl Fix runscript configuration parsing bug.
-17Dec06
-kes Add ENABLE_NLS (as suggested by Eric) to correct NLS problems.
- Remove NLS kludge from baconfig.h. This fixes bug #729.
-kes Allow seeking on DVD.
-kes Add additional messages when Job canceled automatically for
- max run time or max start wait exceeded. This fixes bug #621.
-kes Update maxruntime-test in regression script to properly test
- max run time -- from info given in bug #621.
-kes Simplify automatic cancel code.
-kes Add check for job_canceled() in FD when contacting SD so that if
- job is canceled from max runtime, it terminates faster.
-16Dec06
-kes Save and restore volume name in stored/mount.c fixed bug #712
- where wrong tape was requested in a mount.
-kes Implement cleaner orphan buffer dumping with buf address.
-kes Fix orphaned buffer when canceling job waiting on op intervention.
-kes Update projects file for next vote.
-kes Implement a fix (more could be done) for bug #728 where a double
- EOF is writing on the Volume when spooling is enabled and the
- connection with the FD fails (FD crash, comm error).
-kes Disable attempting to autolabel when polling and device is not
- a tape. This fixes bug #730 where polling with a removable disk
- not mounted caused lots of new Volumes to be created then marked
- in error.
-15Dec06
-kes Enable VSS by default.
-Version 1.39.30 released:
-14Dec06
-kes Complete hopefully the last of the copyright transfer changes.
-kes Separate NumVolumes in SD to NumReadVolumes and NumWrite volumes so
- that migration writing to multiple volumes doesn't mess up reading
- Volumes. This should fix bug #720 -- multivol migration fails.
-kes Make migration SQL look only for Type='B' jobs to migrate. This should
- fix bug #724 jobs getting migrated twice.
-kes Convert remaining dev_cap(dev, ...) to use dev->has_cap().
-kes Implement dev->clear_cap() and dev->set_cap() methods.
-kes Turn off disk seeking on restore for DVDs since I am not 100%
- sure it works.
-13Dec06
-kes Implement code that should properly set that a job was migrated,
- if the migration was successful even if there were no file to
- migrate.
-kes Apply Richard's patch to fix building or filed/restore.c without
- OpenSSL support.
-kes Ensure that at least one block is written by the SD even if the
- FD dies or fails -- should fix bug #728.
-kes Convert stored/record.c ASSERT into a soft fail if the length of
- a record is too insanely long. This should fix bug #???
-12Dec06
-kes Fix automatic labeling of File volumes, which was broken by new
- removable device code.
-10Dec06
-kes Remove typedef uLong for HP in baconfig.h. It broke things.
-lf Fix job byte reporting -- the digest code runs in verify.c and
- increases this value. The better solution is to digest the
- stream as we receive it, thus removing the need to re-read
- from disk at all, but that requires more extensive and
- potentially destabilizing changes.
-lf This commit fixes backup and restore of HFS+ resource forks.
-lf Add a long-missing 'break' statement in HFS+ attribute
- handling that resulted in restore failures.
-09Dec06
-ebl Fix runscript to always execute command after all job type.
+Beta Release Version 2.2.10-b1
+16Apr08
+kes Permit multiple simultaneous restores -- experiment.
+15Apr08
+kes Backport development stream SD reservation system changes.
+ See below:
+===
+16Apr08
+kes Move final volume swapping code to DCR method and
+ call it from acquire_for_read().
+kes When wrong volume is mounted during read, unload_autochanger.
+14Apr08
+kes Stop searching for Volumes in SD askdir if DIR returns the
+ same volume name twice in a row.
+13Apr08
+kes Tweak the swap Volume from one drive to another code so that
+ it now seems to work.
+kes Resolve several problems with recycling that broke the new
+ code (these problems are in 2.2.9 as well).
+kes Remove the volume lock when calling the sysop code.
+kes Don't mark a reserved volume with no writers as unused otherwise
+ jobs fail.
+12Apr08
+kes Rework class structures for VOLRES, DCR, and DEVICE to make
+ the method names a bit more logical, and for more logically
+ handling the responsibilities.
+11Apr08
+kes Remove redundant code in terminating the scheduler that just
+ causes a seg fault in many cases.
+kes Cleanup releasing a volume and make it a DCR method.
+kes Improve algorithm for detecting pre-reserved volume and
+ swapping volumes.
+10Apr08
+kes Tweak volume swapping code so it works.
+kes Correct name overloading in mount.c
+kes Replace released flag in VOLRES with reserved and add access
+ methods for the VOLRES class.
+kes Prevent volume from being released while being swapped.
+kes Refactor parts of stored/mount.c
+09Apr08
+ebl Add sanity checks for VolWriteTime and VolReadTime
+ebl Take care of bad clock changes while computing VolWriteTime
+ and VolReadTime. This should fix or limit #1066
+kes Correct error string numbers in dird/catreq.c
+kes Restructure reserving, acquiring, and mounting volumes. Calls to
+ autochanger are deferred for mount.c -- simplifes the code.
+08Apr08
+kes Do not prune any running job. It just fails the job.
+kes Lock the volumes when changing dev->reserved_device and marking
+ the volume unused otherwise the device can get reserved by
+ another job before the volume is released, thus blocking it.
+===
-Version 1.39.30 released:
-08Dec06
-kes Mark build-depkgs-mingw3 executable in configure process.
-kes Update autoconf/config.h.in to include LOCALEDIR
-kes Undefine NLS settings for wxWidgets as there is a conflict with
- their way of doing things.
-kes Implement a rpool and rpool_source in jcr.h for Migration jobs.
-kes Change a bunch of ->hdr.name to ->name()
-kes Straighten out handling of read and write pools for Migration, including
- getting the code in the proper order.
-kes Improve migration error messages and debug output.
-kes Shorten code path in migration if nothing found to do.
-kes Implement read/write pool in migration job report.
-kes Move ua_run.c select_job_level code into a subroutine (readability).
-kes Move ua_run.c display_job_parameters into a subroutine.
-kes Do not bash dcr->VolumeName in get_volume_info() because it makes
- restore dependent on a valid catalog containing the Volume name.
-06Dec06
-kes Put make_catalog_backup SQL_BINDIR in an environment variable to
- make it easier for the user to change.
-kes Fail any backup job that tries to use encryption and sparse options.
- Hopefully this is a temporary change.
-kes Correct the EndJob return string for non-backup jobs.
-kes Review the encryption restore code.
-kes Implement a new encryption regression test with compression.
-kes Modify migrate not to fail if nothing found to migrate.
-kes Add #undef HAVE_OPENSSL, HAVE_TLS, HAVE_CYRPTO to autoconf/config.h.in
- because they were not always set correctly.
-05Dec06
-kes Update configure.in to include python 2.5 search.
-kes Back out unwanted migration change reported by Richard Mortimer.
-04Dec06
-kes Make migration with no files to migrate set normal termination.
-kes Change message when job manually started to say Job queued. ...
-kes Add job report indication of whether or not VSS and Encryption were
- used by the FD.
-kes Modify sparseBlock variable name to make the code clearer.
-kes Add more sparse tests to regress using gigaslam sparse file
- generator.
-kes Enable data encryption code.
-kes Add gigaslam.c to src/tools. It creates a 1GB file that contains
- only two blocks -- i.e. it is a real sparse file.
-03Dec06
-kes Enable disk seeking on restore.
-kes Implement the SD 'Block Positioning = yes|no' directive. This
- allows the user to turn off block level seeking, but restores
- will be much slower.
-kes Change the word illegal to read invalid in a few places.
-kes Fix Win32 build, which broke when I added parse_args_only in
- lib. I'm not sure I got the entry point right for msvc.
-kes Turn off data encryption. It can be enabled by defining
- DATA_ENCRYPTION in src/version.h and recompiling.
-kes Implement flag to turn off data encryption feature.
-kes Move unserial code in restore.c to a subroutine. Add a bit of debug
- code.
-kes Rework a bit of code in backup.c to handle sparse blocks correctly.
- The main problem was that signatures were being generated on blocks
- of zeros, which is unnecessary.
-02Dec06
-kes Fix scanner (next_arg) to handle leading double quote correctly.
-kes Modify cd command in restore tree to look at full argument without
- keywords. This fixes bug #716.
-01Dec06
-kes Do not update Migrated Job type if migration does not terminate
- normally. This fixes bug #719.
-kes Update ReleaseNotes
-kes Purge Job records from the catalog for Migration. This was
- not properly done previously. This fixes bug #718.
-28Nov06
-kes Initialize msg_type to M_INFO in migration. Pointed out by
- Robert Nelson.
-kes Add some fflush() statements for debug output. This should not
- really be necessary and defeats buffering but users continue
- to complain.
-27Nov06
-kes More copyright changes.
-kes Make sure we don't detach from the despool read device since it
- is a temporary structure where the condition variables are not
- initialized. Bug #711.
-26Nov06
-kes Add Bacula version+date to Client record. This is a very minor
- security problem in that passing the version facilitates a hacker's
- life, but it will make support easier.
-kes Implement fixes to make disk seeking work. Currently turned
- off in version.h pending reserch on what problems it will cause
- because of the previous bsnprinf() sign extension bug.
-25Nov06
-kes Add Landon's refactor of restore Feature request to the
- projects file.
-kes Tweak debug levels and messages for examining the disk
- seek problem.
-22Nov06
-kes Cleanup some of the error termination code in migration.
-kes Separate read/write source strings to keep track of where
- storage devices are used in a job.
-kes Implement a new method of keeping track of which storage
- device is used in a Job. USTORE keeps both a pointer to the
- resource and to the source string.
-kes Modify all code to use new storage set subroutines in job.c
-kes Modify migrate.c so that the definitive selection of the storage
- resource is done in the do_migration_init() routine prior to
- the job going into the job queue. This permits accurate
- deadlock detection (same read and write storage resource).
-kes Remove bfill from btape (I think it was a left over stub).
-22Nov06
-kes Make sure that the storage for a job is pulled first from
- the Pool and if not from the Job.
-kes Ensure that either the Pool or the Job specifies a Storage
- resource.
-21Nov06
-kes Start applying new FSFE copyright.
-20Nov06
-kes Add additional error messages in acquiring a drive for read.
-kes Make WritePartAfterJob the default so that the last DVD part
- always gets written to the DVD by default.
-kes Add additional error messages in migration.
-kes Suppress redundant error messages in migration (possibly more to do).
-kes Apply Martin's fix (updated to 1.39) that takes into account
- run storage overrides in the Director status display.
-kes Implement, but turn off the submitted code that sets the EOT
- model on FreeBSD machines. Turning on this code is too risky at
- this point in the development.
-19Nov06
-kes Implement unique dbid routine for migration to prevent the same
- JobId from being migrated twice. This should fix bug #709.
-18Nov06
-kes Apply Jaime Ventura's 'mail on success' patch.
-kes Add a SMALLOC_SANITY_CHECK for Arno, which aborts Bacula
- if memory usage gets too big.
-kes Tweak migration to ensure that read/write devices are different.
-17Nov06
-kes Create an AUTHORS file to list Bacula contributors.
-kes Add Richard Stallman's four GPL freedoms to LICENSE
-kes Require the conf file to have a valid NextPool for writing the
- migration output.
-16Nov06
-ebl Enable RecycleCount in catalog.
-ebl Fix "echo python | bconsole" segfault
-14Nov06
-kes Implement code to pass the MediaId to the SD. The SD then uses
- this MediaId when creating JobMedia records. This fixes a bug
- with Migration where the MediaId got set to the second Volume
- read rather than the write Volume. Possibly (unlikely) fixes
- bug #709.
-kes Remove NextPool from Job resource.
-kes Edit a few numbers in the restore dialog with commas.
-kes Note, the DIR<->SD protocol has changed.
-13Nov06
-kes Replace () by {} in configure.in for proper HP configuration.
-kes Shorten some lines over 80 characters in filed/backup.c
-kes Cast sizeof() in filed/backup.c to avoid compiler warning.
-
-Version 1.39.28 released:
-12Nov06
-kes Change error message 'illegal' to 'invalid' -- bug #707
-kes Add rather primitive device resource deadlock detection in
- the job queue handler. It detects the same read and write device
- for migration and cancels the job.
-kes Start adding a unique_dbid_hander() routine in migration to avoid
- duplicate mediaids and duplicate jobids.
-kes Add patch from bug #708 to permit relative paths such as ../xxx
- in the restore tree routine.
-kes Add Eric Bollengier's patch to reduce locking time in the SD after
- despooling, and thus many jobs finish faster.
-kes Correct locking order of reservations lock and device mutex in
- reserve.c -- this should correct Arno's deadlock that occurred
- when doing mount/unmount at the same time a job is reserving a
- drive.
-05Nov06
-rbn Fixed problems with encryption when combined with compression
- or sparse files. Unfortunately this means that all previous
- encrypted backups can't be restored.
-rbn Fixed problem in bfgets with Windows and Mac end of lines.
-rbn Fixed bug in Windows version of close_bpipe() that cause programs
- like bsmtp() to hang waiting for the pipe to be closed. Fixed
- binary file type problems in open_bpipe().
-rbn Fixed a number of bugs in the mysql DB scripts.
-03Nov06
-ebl Fix broken runscript on director. (RunBefore, RunAfter)
-ebl Use M_ERROR instead of M_FATAL in runscript.c
-31Oct06
-ebl Small fix src/dird/job.c to add JobErrors count to catalog.
-rbn Ignore UTF-8 marker at the start of .conf files.
-rbn Add stab2cv to 3rd party dependencies. This is a utility I
- wrote that is licensed under the GPL and available on SourceForge.
- It converts the stab debugging info generated by gcc into Codeview
- format. Currently it just translates function names to global
- symbols. This is sufficient to get reasonable stack traces from
- Dr Watson and to look at minidumps.
-rbn Fix bug # 699 - winbacula client crashes whilerunning bat scripts.
-rbn Enable Windows XP look and feel for the tray icons and wx-console.
-rbn Add Windows specific FileSet example to bacula-dir.conf.
-rbn Reorganize Start menu so that documentation and configuration are
- in subfolders.
-21Oct06
-rbn Change daemons and utilities so that if -c is omitted from the
- command line AND there is no configuration file in the current
- directory then the 'standard' configuration file (eg
- /etc/bacula/bacula-*.conf) will be used. If the argument to -c
- doesn't contain any path separators AND there is no configuration
- file by that name in the current directory then the 'standard'
- configuration file directory will be searched for a file by that
- name.
-rbn Fixed restore on Windows so that backslashes as path separators works.
-rbn Add missing query.sql file to Windows installer.
-rbn Fixed Windows versions of catalog backup scripts.
-20Oct06
-kes Fix optional files in Makefile.in of src/filed that caused
- a syntax error when using no optional files.
-15Oct06
-lf Fix a cosmetic bug in filed.c that caused spurious OpenSSL error
- messages; there is no reason to attempt to load a private key.
- from master key files.
+Beta Release Version 2.2.9-b7
+14Apr08
+kes Close bat console windows first to eliminate error message
+ from the notifier.
+kes Remove useless code in Scheduler that causes seg fault on
+ termination.
+kes Correct some SD catalog request error messages.
+kes Don't allow pruning of any running job.
+kes Turn off code in read_record that causes a seg fault in the SD
+ when reading past an EOS_LABEL.
+kes Turn off unloading the autochanger in reserve.c as it just
+ causes problems.
+kes Lock volumes when unreserving a device.
+kes Do not mark volume unused when recycling.
+kes When acquiring, don't mark volume unused if it is reserved (busy).
-Version 1.39.26 released:
-12Oct06
-kes Apply the three patches from Richard Mortimer.
- bacula-reposition.patch, bacula-tape-reopen.patch, and
- bacula-eod.patch. This corrects tape positioning on older devices,
- and also a problem with btape.
-kes Apply fix from bug report #696 where writing to a FIFO does not
- work due to a dumb typo.
-kes Unlock the tape door before the file descriptor is released. This
- should fix lots of somewhat subtle failures when using an autochanger.
-11Oct06
-kes Correct mtx-changer bug that I introduced in a recent commit, and
- pointed out by Robert Nelson -- thanks.
-rbn Fix Windows' daemons so that messages print to stdout if not
- running as a service.
-rbn Add daemon name to trace file name (eg bacula-dir.trace).
-rbn Fix environment variable expansion in directory names on Windows.
-rbn Fix autochanger support in fill command.
-rbn Update SQL scripts to match Unix versions.
-rbn Fix daemon usage displays.
-rbn Cleanup bacula-dir.conf template.
-rbn Install openssl.cnf so that the openssl.exe installed in the
- Bacula\bin directory can be used to generate keys and
- certificates for TLS and encryption.
-rbn Fix cleanup of spool files on Windows.
-rbn Remove /silent option from daemons on Windows. The new default
- is the same as the old /silent. To enable the message boxes that
- previously were suppressed by /silent you must add /debug instead.
- NOTE: As a result of this change, the first time you upgrade from
- a previous version of 1.39.x you will receive the message
- boxes when the remove of the old services succeeds. This
- is the same behaviour as when migrating from a version prior
- to 1.39.0.
- However, going forward, these message boxes will not appear on
- upgrades or new installs.
-rbn Add new /debug option. This option enables the message boxes that
- previously were suppressed by the /silent option. In addition the
- daemons running as services will open a console window if this
- option is used.
-rbn Fix bug with service not being removed on migrated installs. This
- should correct those cases where the file daemon install was failing
- when upgrading from versions prior to 1.39.x.
+Beta Release Version 2.2.9-b6
+06Apr08
+kes Eliminate ./configure warning on po directory
+kes Fix bug #1063, reuse of freed ptr in list nextvol.
+kes Release regex compile buffer in filed/job.c
+kes Add proper type of const char in sql_create.c
+kes Turn off debug in daemon termination routines
+kes Move free_volume_list() before devices are freed in stored.c
+kes Fix reference to uninitalized stack variables in bregex.c.
+ This should correct bug #1067.
+04Apr08
+kes Fix possible seg fault in SD when freeing a volume entry.
+02Apr08
+kes Apply patch from bug #1069 that corrects spurious error messages
+ when ACLs enabled on SGI but no ACL exists.
+ebl Fix a storage deamon segfault at debug level 500.
-08Oct06
-kes Turn on heap reporting in Dir with zero debug level.
-kes Send a message to the sys log when Bacula forces a SEG FAULT, and
- send the same message to stdout.
-07Oct06
-kes Begin work on new GUI "console".
-kes Make configure look in non-standard MySQL library directory
- for Solaris.
-kes Make mtx-changer automatically configure the autochanger wait
- procedure for Solaris, FreeBSD, and Linux. Previously, only Linux
- was implemented.
-kes Correct drop_sqlite_tables.in script to not delete the database.
-kes When writing to a log file, close and reopen the file descriptor
- if there is an error writing the file.
-kes Modify the autochanger loaded?, load, and unload commands to print
- the full text of any mtx output if there is an error. Helps to
- ease diagnosis of autochanger problems.
-kes Correct a few Win32 errno returns in the VSS code so that hopefully
- a resonable Win32 error message will be printed.
-kes Convert a few strcat()... to bstrncat() in the Win32 code.
-06Oct06
-rbn Added Windows version of bsmtp.
-rbn Fixed path search for Windows so that Bacula\bin is automatically
- searched for programs and scripts.
-rbn Fixed bugs in mtx-changer.cmd and made template bacula-sd.conf
- Windows specific.
+Beta Release Version 2.2.9-b5 -- not released
-Version 1.39.24 beta released:
-02Oct06
-rbn Fix restore problem with c:\ prefix bug #676.
-rbn Verify that drive letter is valid on restore.
-rbn Fix re-open() options for tape.
-kes Apply dvd find volume patch from Richard Mortimer.
-kes Eliminate the dvd specific mount routines using only the
- dev->mount/unmount.
-kes Make update_free_space a method of DEVICE and rename
- update_freespace.
-01Oct06
-kes Require a messages command acl to be able to receive messages
- in a console.
-kes Add console, system, and scan job types in util.c.
-28Sep06
-kes Print the Volume purged message only for real jobs to keep
- from cluttering up the daemon messages.
-kes Lock the tape drive door while Bacula is using the device.
-kes Add back the 'No Jobs running' message to FD and SD status because
- my regression script depends on it, and I'm too lazy to change the
- scripts.
-kes Start using structure assignments (not too happy about it ...).
-kes Fix a bug in the tools Makefile that broke on Solaris.
-kes Unload any autochanger drive during a 'release' command.
-26Sep06
-kes Enhance error message when restoring without bootstrap file.
-kes Check restored size only for regular files.
-kes Store Python job level in job record in Dir.
-kes Add back code to open tape device nonblocking, but if rewind fails
- release file descriptor.
-kes Modify acquire.c to first try autoloading the device. Also, ask operator
- to mount tape if drive cannot be opened.
-rbn Made Windows service tray status windows resizable.
-rbn Fixed horizontal scrolling of text in status window.
-rbn Preserve horizontal and vertical scroll position while
- updating. This prevents the display being reset to the
- top line every 5 seconds.
-rbn Fix Windows cross-compile compatibilty problems with
- *nix variants such as OS X without the zic command.
-rbn Eliminate dependency on man2html.
-25Sep06
-kes Update src/win32/dll/bacula.def for change in BPIPE definition for
- Win32 build.
-kes Fix a compiler warning in compat.cpp
-kes Change strcpy to bstrncpy in compat.cpp
-kes Remove some broken code in bdb_list.c
-kes Fix, hopefully the last, ACL problem in the restore command.
-kes Update the README.mingw32
-kes Add new version of upgrade-win32-client.txt to examples directory.
- Submitted by Michel Meyers.
-kes Print an INFO message in the job report when a Volume is marked Purged.
-rbn Fixed handling of external program and script execution
- so that the format of the command line is more flexible.
- Now executable path names containing spaces are translated
- to the equivalent short name automatically. The result is
- passed to cmd.exe with the quotes removed.
-24Sep06
-kes Apply the recycle patch from Richard Mortimer.
-kes Convert a few if statements in dev.c to switch statements.
-kes Start using print_errmsg instead of bstrerror().
-kes Print a job message in SD when a job is marked to be canceled.
-23Sep06
-kes All code added back. Fixed block.c read/write to loop only 3
- times. This apparently keeps the OS from crashing (at least
- most of the time).
-kes The kernel bug still persists. Backup something then immediately
- do a bscan on the same tape, and the kernel will crash.
-kes Simplifed tape open(). It no longer uses nonblocking mode, which
- means that opening with no tape loaded will probably take at least
- 6 minutes before an error is reported.
-kes Do not use MTSETDRVBUFFER if not running as root. Do a MTRESET
- when doing set_os_device_parameters.
-kes Report open error in mount.c
-kes Remove all .exe files from the installer directory on make clean.
-20Sep06
-kes Start adding back removed code.
-kes Back out a number of changes because backups to tape crash my
- system.
-kes Remove the inetd code from the File daemon.
-18Sep06
-kes Add -c option to pg_dump so that it initializes tables when
- restored.
-kes Fix FirstWritten time on Volume to be obtained from SD so that
- it is the actual time the volume was first written.
-kes Minor Makefile changes.
-kes Handle EBUSY during read(). Improve how EBUSY is handled in write().
-ebl Add yes keyword to prune/purge command
-16Sep06
-kes Correct a test in block.c that prevented restore of a DVD from
- looking at the last part in the spool directory.
-kes Make some error messages clearer mostly by using the word DVD
- in the message. Improve infor message in read_record for DVDs.
-kes Remove DVD kludges in dircmd.c label/relabel.
-kes Move the dvd relabel code from dircmd.c into
- write_new_volume_label_to_dvd() adding a relabel argument.
-kes Rewrite the truncate_dvd() code to be much simpler and
- more logical. First blow away any spool part, then create a
- new empty part and write to the DVD.
-kes Rewrite the can_write_on_non_blank_dvd() code making it
- only ensure that no valid data is on the DVD -- i.e. it
- can be overwritten.
-15Sep06
-kes Minor Makefile fixes.
-kes Put attach_dcr_to_dev in a subroutine.
-kes Make attaching/detaching to/from a device use a flag and
- only detach if actually attached.
-kes Add dvd-simulator.in to scripts directory and add to configure.
-kes Fix code in acquire.c that checks fd != 0 to use dev->is_open().
- This could be a cause of a number of drive reservation problems.
- Note, this code is now in attach_dcr_to_dev().
-kes Suppress doing Volume updates if it is a system job. This should
- prevent the DVD label blocking.
-kes Clear the freespace ok flag in a couple of strategic places.
-14Sep06
-kes Put removing zero sized spool part file in subroutine and
- call from release_device().
-kes Add Richard's patch for relabel to dircmd.c, but save and restore
- dev Volume name.
-kes Rework a lot of subroutines in dev.c to take dcr as an
- argument. This is done to eliminate the usage of attached_dcrs
- in lseek().
-kes Change truncated_dvd to blank_dvd, which seems more suitable.
-kes Apply most of Richard Mortimer's truncate patch.
-kes Create lseek() method for DEVICE that takes dcr as an
- argument. This is to eliminate the use of attached_dcrs in
- lseek(). The calls to lseek_dev() must still be changed.
-13Sep06
-kes Apply Richard Mortimer's patches for printing an error
- message in btape when a DVD is used, and to initialize traceback.
-kes Added error message to btape when trying to access a file.
-kes Move prototype of update_slots() to protos.h.
-12Sep06
-kes Add JobErrors, JobFiles, SDJobFiles, SDJobErrors, SDJobStatus,
- and FDJobStatus to the Director Python variables.
-kes Make sure valid argument passed to str_to_utime() where Arno
- had a seg fault.
-kes Apply Richard Mortimer's patch for bcopy, bextract, and bscan.
- I.e. part of two different patches.
-11Sep06
-kes Modify disk changer to simulate some of the error conditions
- of mtx-changer.
-kes Make sure the close() call in the SD tools is just before the
- getchar() call.
-kes Implement dir_get_volume_info() in bls using the patch from
- Richard Mortimer but call find_num_dvd_parts().
-kes Implement find_num_dvd_parts() that mounts and scans a DVD
- and counts the parts.
-kes Move the omode code in open_dvd() up so that the cannot
- write on blank disk can check can be bypassed for read mode.
- Not yet implemented.
-10Sep06
-kes Disable normal data spooling for DVD writing which uses
- a different spooling mechanism.
-kes Apply patch from Richard Mortimer to ensure that the number
- of DVD parts is correctly updated.
-rbn Save installer details log in the Bacula directory as
- install.log.
-rbn Add installer generation of client and storage templates
- suitable for @inclusion on the director.
-rbn Mark previously installed components for Win32 read-only since
- deselection doesn't do anything.
+Beta Release Version 2.2.9-b4
+01Apr08
+kes Re-enable code to remember last volume mounted on a non-tape
+ Autochanger.
+kes Add patch supplied in bug #1068 that fixes a SD crash when using
+ a Virtual autochanger.
+kes Generate correct JobMedia records during spooling/despooling when
+ running concurrent jobs. Thanks to Tom Ivar Helbekkmo
+ <tih@hamartun.priv.no> for excellent analysis and testing.
-Version 1.39.22 beta released:
-08Sep06
-kes Fix logic error in handling error return from mtx-changer
- script.
-kes Make status from SD aware of -1 (unknown) Slot status.
-kes At Eric's suggestion make both the 'slots' and 'drive' commands
- to the Storage daemon work even if the drive is busy.
-kes Make two separate Win32 menu links for starting bconsole and
- wx-console in winbacula.nsi
-kes Apply DVD part_spooled patch from Richard Mortimer
- richm@oldelvet.org.uk
-kes Put installer/Readme.txt into Win32 EOL format for Notebook.
-rbn Fixed problems migrating settings from previous releases in
- Win32 installer. Add Readme.txt with an option to show it on
- the installer Finish page.
-07Sep06
-kes Use get_catalog_resource() to open catalog database
- to ensure that ACLs are respected and that user is
- correctly prompted for database.
-kes Integrate multiple console/director patch from
- Carsten Paeth calle@calle.in-berlin.de
-ebl Add character substitution in Job/JobDefs WriteBootStrap.
- You can use now 'WriteBootStrap = '/path/%c_%n.bsr''
-kes Apply patch supplied in bug #656 to pass priority field
- in the run dialog to the Director in gnome console
-kes Restore DCR after VOL_NAME_ERROR in mount.c. Hopefully
- this will fix bug #627 where Bacula eventually gets
- confused about what Volume it wants.
-kes Add a new close_part() class in the SD to save the device
- state around open/close_part/open for DVD writing. This
- should fix the num_dvd_parts getting zeroed as reported by
- Richard Mortimer.
-kes Apply patch from Richard Mortimer that correct edit code
- for debug output of st_size.
-ebl Add support of encrypted data stream to bscan.
- display data_len instead of data content (may be binary)
-06Sep06
-kes Add dev->close() in dir_ask_sysop_to_mount_volume() in
- bcopy. Fixes bug #669 reported by Eric.
-kes Fix incorrect number of arguments in SQL statement in
- sql_get.c as reported by Eric.
-kes Manual updates.
-kes Update examples directory.
-kes Remove unused variable in winservice.cpp
-kes Make Win32 make command build installer.
-rbn Add new Install Type page, used to select between Automatic
- and Custom installs. Automatic installs only prompt for
- configuration items that can't be reasonably defaulted.
-rbn Added Bacula logo to page headers.
-rbn Added Upgrade support
- - Configuration and component selection are migrated from
- pre-1.39 installs.
- - Configuration of upgraded components is preserved and
- not prompted for
- - Configuration of new components is handled according to
- the Automatic / Custom selection.
- - Component selection is defaulted to previously selected
- components.
-rbn Installation of Server components is disabled on
- Windows 95, 98 and ME.
-rbn Added URLs for support, info and upgrades to Bacula entry
- in Add/Remove Programs.
-rbn Added Version info to Bacula entry in Add/Remove Programs.
-04Sep06
-kes Correct dvd code that breaks tape labeling.
-kes Implement Enabled on update slots.
-02Sep06
-kes When doing a label, pass the VolBytes back to the Director,
- which puts it in the catalog.
-kes Print an error message if the user attempts to prune an
- archived Volume.
-kes Need to start using %ld when sscanfing 32 bit values.
-kes Update the free
-kes Correct the counting of VolCatBytes for DVDs.
-kes Add code to mount.c to require that VolCatBytes corresponds to
- what is actually found when doing an append.
-kes Update freespace only after writing on the DVD.
-kes Remove code that blows away the current part in the spool file.
-01Sep06
-kes Apply new dvd-handler patch from Richard Mortimer.
-kes Tweak so that debug level 20 shows only DVD commands.
-kes Correct spooled_part flag in dev.c close() so that it is cleared
- when the spool file is deleted or does not exist.
-kes Print part number in read_records when eof hit (restore).
-rbn Installer default changed to start services on new install.
-31Aug06
-kes Make find with no args in tree restore return error rather than
- stopping the selection. Fixes bug #665
-kes Rework DVD writing to ensure that the last part is written
- on open_next_part when dealing with a spool file.
-kes Correct the lseek_dev() routine to handle end point correctly
- (bug introduced by me).
-kes Allow part number to exceed num_dvd_parts in lseek_dev().
-rbn Change make_session_key on Windows to use WIN32 APIs to produce
- a better seed.
-rbn Add new tool scsilist.exe which displays the changer, tape and
- CD/DVD (1394, SCSI, SATA, ATAPI) devices and the information required
- to add them to bacula-sd.conf.
-30Aug06
-kes Apply dvd-handler patch from Richard Mortimer.
-kes Apply dvd error check patch from Richard Mortimer.
-kes Apply bpipe race patch from Richard Mortimer.
-kes Rework how DVD labels are handled and set append only
- when part > num_dvd_parts.
-27Aug06
-kes Rework many features of DVD writing and reading. Added many error
- messages. Most importantly changed part to represent the current
- part number base zero. This makes current DVD writing incompatible
- with previous version.
-26Aug06
-kes Add host:port to connect failure messages to FD and SD from Dir.
-kes Add WhereACL to console ACL list. If nothing is specified, only
- the default is permitted for restore. Otherwise, *all* allows any
- path, or you can specify permitted paths. This should allow control
- over where users can restore files. This is untested.
-kes Modified message to add a ? (as in loaded?) when querying the autochanger
- for what Slot is loaded.
-kes Fixed the use of Slot, so that is more correctly maintained, thus
- eliminating unneeded duplicate calls to determine what Slot is loaded.
-25Aug06
-kes Install man pages with 'make install'
-kes wx-console crashes because of differences between Bacula and wxWidgets
- malloc()/free(). Tweak wx-console to use bmalloc()/bfree() for Bacula
- calls.
-kes correct improper indenting in wx-console/console_conf.c
-kes update wx-console header copyrights
-kes Fix bug #658 where wx-console mangles file/directory names containing
- commas.
-24Aug06
-kes Add Media.Enabled flag to client backups for dotcmds.c
-kes Enforce Media.Enabled=1 for a current restore to work.
-kes Require restore case 3 to have sqlquery permission to work.
-kes Remove obsolete del_MAC sql command.
-kes Ensure that bscan creates Volumes with Enabled=1.
+Beta releae version 2.2.9-b3
+27Mar08
+kes Rework certain SD locking based on gdb tracebacks of deadlocks
+ sent by Eric. This code now uses only the volume_lock() rather
+ than the reservations lock when at EOM and acquiring a new
+ volume.
+kes Ensure only one exit point in several subroutines.
-Version 1.39.20 beta released:
-22Aug06
-kes Correct missing Client table reference in SQL pointed out by
- Marc.
-21Aug06
-kes Fix Win32 build (new entrypoint, start baculafd).
-20Aug06
-kes Add -n option to bconsole to turn off conio.
-kes Print JobIds to be migrated in Job Report.
-kes Add additional user supplied notes to the messages part of
- bacula-dir.conf concerning multiple email addresses.
-kes Fix an incorrect comment pointed out by a user in dvd_handler.in
-kes Add more recent Feature requests to Projects file.
-19Aug06
-kes Apply Maritn's fix to src/win32/Makefile.
-kes Apply Martin's fix to configure.in for pthreads on FreeBSD 4.x
-kes Implement pruning for Migration and migrated jobs.
-kes Implement PoolOccupancy migration.
-kes Implement PoolTime migration.
-16Aug06
-kes If doing a mount, look for a slot, and if specified pass it to
- the SD so that it can load the autochanger.
-kes Return DVD=1 flag if a label command is done to a DVD. This
- permits setting VolParts to 1.
-kes Apply DVD patch from Richard Mortimer <richm@oldelvet.org.uk>, but
- rework ua_label code based on DVD media type to use DVD flag returned.
-15Aug06
-kes Eliminate some compile warnings in dird_conf.c
-kes Format the bytes field in the terminated jobs part of the status
- command for the three daemons with suffixes to reduce print size
- of backup bytes. Suggested by a user.
-kes When not descending into a directory, print the File= name that
- triggered it -- makes why not descending a bit clearer.
-kes Do not unload autochanger when doing a list command -- basic code
- from Eric Bollengier.
-12Aug06
-rbn Reworked the MinGW32 build-dependencies script, it has been renamed
- to build-depkgs-mingw32. It now handles two options -h to display
- help and -C to reextract the source and apply the patches. The -C
- option is useful for updating the source after new patches are
- released.
-rbn Moved the 3rd party package URLs to a separate file External-mingw32.
- This allows updating to new versions without having to modify the
- script and makes it easier to figure out which packages and which
- versions are used.
-rbn Added a new script build-depkgs-msvc.cmd which does the same thing
- as build-depkgs-mingw32 except they are built using Microsoft Visual C
- and placed in the depkgs-msvc directory. There is also an
- External-msvc file to describe the packages.
-08Aug06
-rbn Fix Windows cross-compile compatibilty problems with FreeBSD.
-07Aug06
-kes Fix bug #462 incorrect error message printed when client script called
- from File= was not found.
-kes Fix bug #558 (waiting for feedback) where Bacula needs too much time to
- do a rewind on Solaris when no tape is in the drive (Solaris does not
- have the detailed errno found on Linux). Added Solaris specific code.
- Note, this may apply to other OSes as well.
-06Aug06
-kes Defined BUILDING_CATS in src/cats/cats.h so that *nix builds.
-dsb Updated rpm spec for 1.39 - updatedb 9 to 10, add new man pages,
- fix bug 648 - update sqlite script patches, lock out gnome2console
- builds for platforms with gtk+ < 2.4.
- Updated build_rpm.sh - add remote source directory, add switch for
- signing, refine file names.
- Updated spec file again for Mandriva build as they have this curious
- custom of silently converting all manpages to bzip2 format just before
- the final packaging step.
-05Aug06
-rbn Fixed the Windows Makefiles so that they won't accidentally try and
- pickup binaries for the Unix build. This allows both the Unix
- build and the Windows build to be built in the same tree without
- interfering with each other.
-rbn Fixed error handling and cleaned up mtx-changer.cmd.
-rbn Added the rest of the database scripts. These are installed but are
- not yet edited for variable replacement.
-rbn Broke out the cats functionality from bacula.dll and put into new
- separate dlls for each database type. At installation time the
- correct one is copied to bacula_cats.dll.
-rbn Eliminate the need to install the mysql.dll on client only builds.
-rbn Moved dird/sql_cmds.c into the cats directory so all the database
- specific #ifdefs were in the cats directory.
-rbn Added a new sql_cmds.h with all the declarations for the variables
- exported from sql_cmds.c.
-rbn Moved catalog_db[] from lib/message.c to a new routine db_get_type()
- which is implemented in bdb.c, mysql.c, postgresql.c and sqlite.c in
- src/cats.
-kes Correct improperly formatted list command output reported by Dan.
-04Aug06
-kes Correct despool time calculation.
-03Aug06
-kes Remove previous changes to compat.cpp as they create problems.
-kes Use old style MD5 for FileSets to avoid Full saves on every Job.
-kes Attempt to fix problems with the msg_queue crashing on Solaris
- when Bacula is terminating, but problems remain.
-kes Add WIN32_VSS to HAVES in src/Makefile.inc.in to correct VSS
- name editing problems with too many \\?\es.
-kes Fix some Bacula source code style problems in compat.cpp.
-kes Add debug code to compat.cpp and convert non-Bacula debug code
- to Bacula style.
-02Aug06
-kes Change the name of the technical notes file from kes-1.39 to
- technotes-1.39. Prefix my messages with 'kes '.
-kes Allow dequeue_messages() to be called twice. Should fix bug
- # 649.
-kes Add Job type to bscan Job information output.
-01Aug06
-kes Update copyright date in program files, and for the most part
- put it on a #define.
-kes Implement %q in bsnprintf.c apparently I forgot it.
-31Jul06
-kes Make disk-changer sed command compatible with FreeBSD.
-kes Make a first cut at a ReleaseNotes and ChangeLog for a
- beta release.
-kes Make make clean descend into the src/win32 directory.
-kes Fix some #ifdefing so that Solaris and FreeBSD compile
- sys/stat.h was turned off.
-kes Use suffix editing for new transfer rate messages.
-kes Attempt to come up with a workaround which seems to be an OS
- bug where write() returns EBUSY. IMO this should not happen.
- It triggered in truncatebug test. The workaround retries using
- a 100 ms wait.
-kes Eliminate a strerror() call in a class method that failed with
- older C++ compilers.
-kes Use rm -rf rather than rmdir to delete the src/win32/release
- directory during make clean.
-30Jul06
-kes Make bscan ignore ACL streams.
-kes Update projects files with new Feature Requests.
-kes Generate current English and French manuals and upload
- them to the site.
-kes Update the home page to include the new British/French flags to
- switch between translations. Work done by Alexandre Baron.
-kes Make disk-changer script print an error message if the changer
- directory is not defined.
-kes Create a generic DB routine for getting an int (32/64 bit) from
- the DB.
-kes Add more migration code.
-kes Add a few more files to .cvsignore here and there.
-kes Minor fixes for SD write rate and despooling rate.
-kes Turn off new test code in src/console.c
+Beta release version 2.2.9-b2
+24Mar08
+kes Fix to initial tape drive open to release the volume name
-Version 1.39.18
-29Jul06
-kes Incremented the version number to signify that all of Robert's code
- for Win32 that was in the branch is now integrated into the HEAD,
- and that Eric has submitted code that we hope will provide limited
- backward compatibility with 1.38 file daemons (more testing to be
- done).
-kes I rationalized a few of the names of the variables (mainly jcr names)
- that are used during migration as keeping three different jcrs at the
- same time clear in ones head is not easy.
-
-Version 1.39.17
-28Jul06
-eb Tweak new runscript feature to work with 1.38.x FDs.
-eb Correct crypto.c to fix segfault when restoring an encrypted stream
- on fd which don't use rsa keys.
-eb Add yes/no English keywords on localized yes/no questions.
-27Jul06
-kes Several important commits from Robert Nelson for code cleanup and
- Win32 build.
-kes Modify console.c so that when conio is enabled, it converts \n to
- \n\r before outputting to the console. Hopefully this will fix
- the problems with expect in Perl that Eric saw.
-24Jul06
-kes Change cats/sql.c to eliminate %-*s format, which I think is turned
- off in bsnprintf.
-kes Add Comment field to llist of a volume.
-kes Allow true/false in some yes/no questions.
-kes Implement update volume enable=(on|off|true|false|archived|0|1|2)
-kes Remove a few /n's when scanning commands from another daemon. This
- permits adding additional fields later.
-kes Modify dbcheck to handle ctl-d and to delete Log table entries.
-kes Update README.mingw
-22Jul06
-kes Tweak authentication to work with 1.38.x FDs.
-kes Tweak catalog make scripts.
-kes Fix catalog upgrade scripts so that they work.
-kes Correct despooling debug code to eliminate race condition.
-19Jul06
-kes Add additional fields as specified by Arno to LocationLog.
-kes Add comment field to the Media record.
-kes Add Time field to the Log record.
-kes Correct migration SQL (thanks to Bill Moran) so that it
- runs with PostgreSQL also.
-kes Add spooling/despooling info in status output of SD.
-17Jul06
-kes Spend a lot of time integrating mkcdrec with the rescue disk.
-kes Add VOLMGMT message class for volume management messages (none yet).
-kes Add CATALOG as a destination. It goes into the LOG table.
-kes Implement the Log table in the DB.
-kes Implement the Location Log table in the DB (for user use).
-kes At Eric's request add a run_scripts() just after blast_data in
- src/filed/job.c
-10Jul06
-kes Add Enabled column to Location, correct some typos in DB schemas.
-kes Correct bug I introduced into RunScripts enum.
-kes Add log table to Catalog
-kes Purge original job migrated if the migration terminates normally.
-kes Cleanup purging of files/jobs so that it is done only in a
- single subroutine.
-kes Add new VOLMGMT message class.
-kes Add Catalog message destination (user conf code remains to be written).
-09Jul06
-kes Modify read_record and friends to properly deal with migration
- needs.
-kes Update debug code in read_record.
-08Jul06
- ======================= Warning ==========================
- Separate read and write storage in Jobs in the Director. This
- is a major rewrite of some of the low level code and hence has
- a high probability of introducing bugs.
- ==========================================================
+Beta Release Version 2.2.9-b1
+22Mar08
+kes Fix to JobMedia fix.
+kes Fix bug pointed out by Peter Much that causes the StorageId to
+ be updated when reading a tape (during migration, it could have
+ been incorrectly set to the write StorageId).
+21Mar08
+kes Implement autostart scripts for Debian
+20Mar08
+kes Fix mtx-changer.in for broken Debian mt program.
+19Mar08
+kes Massive commit of all fixes and back ports to create 2.2.9
+18Mar08
+kes Apply doc fix from bug #1062.
+kes Resolve crash and improper restore wx-console Win32 restore
+ GUI. Fixes bug #1065.
+kes Update Win32 wxWidgets to latest version.
+kes Attempt to do correct handling of Win32 mount points. Should
+ fix bug #1046.
+kes Fix Win32 FD backup/restore memory leak due to improper termination
+ of BackupRead/Write. This fixes bug# 1038.
+kes Add const to AIX prototype for initgroups()
+27Feb08
+kes Undo bug #1047 heap overrun fix as it is not correct.
+14Feb08
+kes Fix creating first JobMedia record during Migration to include
+ proper index. This caused slow restores of migrated jobs.
+10Feb08
+kes Fix bug #1047, which had a heap overrun when stripping certain paths,
+ and do not strip paths on symbolic links.
+kes Set catalog backup database and user name from values specified on
+ the ./configure line.
+ebl Apply patch to correct bug #1031, about wrong pool source information
+ in job report.
-kes Move the job init code up to *before* the job is put into
- the job queue (resource allocation queue). This permits the
- job to establish whether it will read or write or do both.
-kes Add name() methods to all the resource classes.
-kes Implement separate read and write storage resource
- allocation/deallocation in jobq.c
+Release Version 2.2.8
+25Jan08
+kes Apply patch from Martin to correct bug #1040, bscan sets existing
+ ClientId to zero.
+kes Fixed important spelling error in doc -- bug #1045.
+23Jan08
+kes Move initialization of read/write res lock earlier in the code.
+ This fixes the crash with a null conf file. This fixes bug
+ #1030.
+kes Redefine CURES in lib/parse_conf to be URES and move it all
+ into lib/parse_conf.c -- this responds to bug #1042, but does
+ not fix it. The fix is not to compile with FORTIFY_SOURCE.
+kes Backport fix de-referencing a NULL pointer in the scanner from
+ the trunk SVN. I don't think this was reported as a bug.
- ======================= Warning ==========================
- Implemented new method of getting the default Storage from the Media
- record rather than from the MediaType for restore. As a fall
- back, if no Storage is defined, use the MediaType. This
- eliminates most all prompts if there are multiple MediaTypes
- used. This is an important and fundamental change.
- ==========================================================
+Beta release Version 2.2.8
+09Jan08
+kes Re-enable the new job code editing (%f).
+08Jan08
+kes Fix bsnprintf for float point numbers. I broke recently when
+ parameterizing some variables.
+03Jan08
+kes Move Heartbeat documentation from Job to Director resource.
+ This fixes bug #1033.
+02Jan08
+kes Fix existing switch drive SD code to call autochanger to release
+ any old volume. This must be done to keep the autochanger from
+ releasing subsequently newly reserved volumes in doing a close().
+ This should possibly fix bugs #1032 and #1018.
+kes Apply big backport of current SVN SD code that corrects a number
+ of race conditions. This is a first step in fixing bug #1018.
+29Dec07
+ebl Fixes bug #1028 where "Selection Type" option was not usable
+ with JobDefs.
-kes Add more detail (Storage, Device) to list of volumes printed
- for restore.
-kes More code in migrate. In particular start multiple jobs if
- migrating a volume.
-kes Probably overkill, but ensure that the bsr is unique even within a
- job in FD and SD.
-kes Rework bsys.c drop() so that it now should work as expected.
-kes Update a bunch of old copyrights -kes particularly in .h files.
-kes Remove src/lib/bshm.c/h
-05Jul06
-kes Migration fixes
-04Jul06
- ======================= Warning ==========================
- All hash codes in the database are now kept in world
- compatible base64 format (no = filling). This means that
- all FileSets will be updated and if you are running
- verify jobs, you must do an InitCatalog.
- Authentication uses the new algorithm, but should be
- backward compatible with 1.38.x
- ===========================================================
-kes Modify the authentication routines so that the 1.39.15 Director
- always runs with the compatible binary to base64 code (same as
- the rest of the world). It will however detect if an SD or
- FD is running the old code and if that is the case, will use
- the old algorithm for authentication. However, all consoles must
- use the compatible algorithm, and all data entered into the database
- (all hash signatures, MD5, SHA1, ..., and all FileSet hashes) will
- use the compatible algorithm.
-kes Rename the cram_md5 routine names to be slightly more appropriate
- to what they are doing (challenge and respond).
-kes Robert committed his #ifdef and header cleanup.
-30Jun06
-kes Fix a compiler warning in files/backup.c
-kes Cleanup NOT NULL vs DEFAULT 0 in database creation.
-kes Tweak btape.
-kes Robert committed his low impact changes.
-kes I removed a size_t from the jcr.h definition.
-kes Update the tape regression scripts (still to be tested).
-kes Add gcc and gcc-c++ requires to srm as suggested by a user.
-kes Require done or quit to exit from in memory tree restore.
-26Jun06
-kes Write install/uninstall of new manpages. There are now a
- pile of man pages. Some of which need a lot of work.
+Release Version 2.2.7
+24Dec07
+kes Partial back out (disabled) %f job code editing because it
+ does not build on Win32.
+kes Fix seg fault Frank Sweetser reports in regression testing
+ on his systems. The problem was that the original author of
+ bsnprintf.c did not take into account the side effects of
+ using ++x in the argument to a #define.
+14Dec07
+kes Apply patch from Michael Stapelberg <michael@stapelberg.de>
+ that implements double quoting include names in conf files,
+ and also allows piping input by having the first character
+ be a vertical bar (|).
+kes Apply patch from Bastian Friedrich <bastian.friedrich@collax.com>
+ that implement %f in RunScripts to pass the FileSet name.
+kes Skip leading | when lex input comes from a pipe as suggested
+ by Michael Stapelberg <michael@stapelberg.de>.
+13Dec07
+kes Apply patch for bsmtp Win32 daylight savings time fix supplied by
+ Nerijus Baliunas <nerijus@users.sourceforge.net>
+10Dec07
+kes This patch corrects a problem where the maximum concurrent storage
+ jobs counter gets out of sync during restore jobs causing jobs to
+ 'wait on max Storage jobs'. This patch fixes bug #1009.
+08Dec07
+kes Add new include to postgresql.c suggested by Marc Cousins so
+ that it compiles correctly with pgre version 8.3. Also fix
+ misuse of %x with pointer (should be %p).
+03Dec07
+kes This patch fixes bcopy so that it produces correct Volumes.
+ It fixes bug #1022.
+kes This patch eliminates spurious output to the console during a VerifyVolume
+ job that contains encrypted data. It fixes bug #1024.
+02Dec07
+kes This patch prevents the 'status dir' command from trying to use a scratch
+ volume and possibly moving it from one pool to another. This patch fixes
+ bug #1019.
+30Nov07
+kes Fix --archivedir addition to configure. Replace it with
+ --with-archivedir in configure.in This fixes the regression
+ test builds.
+kes This patch fixes bug #1012 where the job is canceled because
+ of Max Run Time exceeded when the job has not yet started.
+29Nov07
+ebl Apply Richard Mortimer patch that fixes #1016 when there are more than
+ one 'part' to write. Instead of each part being stored on disk,
+ written to DVD, then deleted from disk, all parts are written to disk,
+ and only the last is written and deleted from disk.
+27Nov07
+kes Correct typos in disk-changer.in
+25Nov07
+kes This patch fixes the status command to include the formating string for
+ JS_AttrInserting. It fixes bug #1021.
+kes This patch should fix the Mac OS X build problem on the latest
+ Darwin, where sys/types.h was not included correctly (apparently
+ due to a change in the Mac headers). The solution was to explicitly
+ ensure that it is defined for the ./configure.
+ This patch also has a rebuild of configure that includes the Debian
+ qt4 patch to check for qmake-qt4. This patch fixes bug #1020.
+kes This patch should ensure that queued messages to the console are
+ displayed as soon as possible. It should fix bug #1007, but has been
+ reported not to work.
+14Nov07
+kes This patch fixes the infinite loop when trying to increase the
+ maximum number of volumes in a Pool during the add command.
+ This patch fixes bug #1008.
- ======================= Warning ==========================
- The --mandir ./configure option now points to the top level
- man directory. The man files will be installed under
- mandir/man8 and mandir/man1 as appropriate.
- ==========================================================
+Release Version 2.2.6
+09Nov07
+kes Get fix for joblist bug in bat from trunk.
+04Nov07
+kes This patch fixes bug #1003 where putting the message output from
+ a Verify job into the catalog results in a recursive loop. The problem
+ seems to show up only with postgresql (to be verified).
+02Nov07
+kes Fix bug #942 where lots of emails where generated when the heartbeat
+ interval was low and Bacula wanted a different tape from the one in
+ the drive.
+26Oct07
+ebl Apply 2.2.5-lastwritten.patch to fix the LastWritten field
+ which was updated during a restore (or a reading migration) bug #982
+24Oct07
+ebl Use qmake-qt4 instead of qmake when available (debian system).
+22Oct07
+kes Add a security warning to src/cats/make_catalog_backup.in indicating
+ that passing the password via the command line (arg 3) is insecure.
+ This responds to bug #990 (it doesn't fix it).
+kes Apply 2.2.5-postgresql-errors.patch
+kes Remove unneeded File table index on JobId, which is already
+ present as the first index of another multi-index.
+19Oct07
+kes Set default debug_level to zero. This corrects bugs #991 and #993.
+kes Fix a crash in bat when it cannot connect to the Director for example
+ if the Director is not running.
+16Oct07
+kes Activate Close button on tray-monitor window. This fixes
+ bug #986.
+12Oct07
+kes Fix spurious warning message printed when creating a volume with
+ a LabelFormat. This fixes bug #976.
-kes Add complete text of GPL to LICENSE.
-kes Implement job report that indicates where Storage and Pool
- came from -kes with overrides and Pool storage and NextPool,
- it is all very complicated.
-kes Create a few common subroutines for backup.c and migrate.c
-kes Eliminate warning messages from tray-monitor.c
-25Jun06
-kes Apply fix for scheduler for missing unlock_jobs().
-kes Clean out autoconf caches before rebuilding configure
-kes Fix the FreeBSD pthreads lib define updated by Dan.
-kes Add missing semicolon in src/console/console.c
-kes Add Robert's enhanced version of build-win32-cross-tools
- as well as his patch file.
-kes Note, the new gcc options are likely to break building of
- wx-console or the tray-monitor ...
-24Jun06
-kes Implement Robert's suggestion to suppress printing compile lines.
-kes Detect GCC correctly (I hope)
-kes If using GCC (actually g++) add the following compiler flags
- -fno-strict-aliasing -fno-exceptions -fno-rtti
+Release Version 2.2.5
+09Oct07
+kes Add JobId in place of Job name in all the Jmsg() output.
+kes Correct the APP_DESC for the Win32 storage service (remove an e).
+06Oct07
+kes Add new SD despooling attributes and Dir inserting attributes
+ job status codes. This fixes bug #961.
+kes Fix Win32 drive display in bat version browser. Fixes bug #962.
+05Oct07
+kes Fix doc issue. This fixes bug #963.
+kes Fix listing performance problems in bat. Pointed out by
+ Chris Howells.
+ebl Fix replace on restore. This fixes bug #969
+kes Fix bat code that tests for Win32. This should fix bug #968
+kes Query 5 list wrong Vol after migration. This fixes bug #960
+04Oct07
+kes Correct lib/Makefile.in to include enh_fnmatch.o that was removed
+ in back porting from 2.3.x
+03Oct07
+kes Backport almost 4000 lines of 2.3 code that fixes a number of bugs.
+ The details are included in the notes in this file.
+28Sep07
+kes Backport 2.3 code that fixes: it fixes incorrect or incomplete error
+ messages; it fixes a problem opening the SQLite3 database when multiple
+ simultaneous jobs were running; it fixes a bug with certain versions of
+ MySQL where batch inserts failed because of table name character case
+ (upper/lower) differences.
+kes Fix race condition that drops final block written to volume.
+ This happens in rare cases with multiple simultaneous jobs
+ when the Volume fills. This fixes bug #964. May be related
+ to bug #935 and possibly #903.
+27Sep07
+kes Fix FD->SD authorization failure, which was due to spurious
+ wakeups from a pthread_cond_timedwait(). Simply check the
+ predicate before continuing. This fixes bug #953
+dvl Add new configuration item --archivedir
+dvl Adjust regression tests to use tmp not /tmp. This will allow
+ multiple concurrent runs of the regression tests.
+28Sep07
+kes Fix race condition that drops final block written to volume.
+ This happens in rare cases with multiple simultaneous jobs
+ when the Volume fills. This fixes bug #964. May be related
+ to bug #935 and possibly #903.
+kes Eliminate more strerror() and replace with bstrerror().
+kes Remove BSD getopt and replace with unrestricted IBM version.
+kes Fix Win32 build for changed calling sequences.
+27Sep07
+kes Fix FD->SD authorization failure, which was due to spurious
+ wakeups from a pthread_cond_timedwait(). Simply check the
+ predicate before continuing. This fixes bug #953.
+kes Add const char where needed (more to do).
+26Sep07
+kes Setup SQLite busy handler before doing queries. Fixes bug #967.
+kes Don't overwrite error message in check_tables_version.
+ Fixes bug #966.
+kes Unlock batch insert tables with same calls used elsewhere.
+kes Allow starting 59 jobs a second.
+kes Make SD session key more random.
+kes Add retry for SQLite opening db if it fails. Probably helps
+ for bug #967.
+kes Suppress extra error messages during batch insert failure.
+ Fixes bug #966.
+kes Put some FD auth code on dbglvl rather than fixed.
+kes Return insert attributes error message in db msg buffer to avoid
+ false error messages. Helps fix bug #966.
+kes Separate batch init error messages. Probably helps fix bug #966.
+kes If Dir gets an error during inserting attributes, cancel SD.
+ This reduces unnecessary error messages.
+24Sep07
+ebl Cleanup batch insert code. Probably fixes bug #965.
+23Sep07
+kes Turn off some code when batch insert not enabled.
+kes Edit FD name in connect error messages.
+22Sep07
+kes Add code to handle tray monitor separated from Win32 FD.
+kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
+20Sep07
+kes Fix ANSI tape labeling. This fixes bug #954.
+kes Increase the max block size to 4MB fixes bug #957.
+kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
+ is not properly mounted (recognized) during a poll.
+kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
+ Job that has differences reports Verify OK.
- ===================== Warning =============================
- Turn on new bsnprintf() code. This could cause print output
- to look different.
- ===========================================================
+Release Version 2.2.4
+14Sep07
+kes Increase size of name string when FD making connection to SD.
+ May fix bug #953.
+13Sep07
+kes Add code to try to fix bug #908.
+kes Add waits to multiple exit detection code to try to force pid
+ file to always be deleted.
+kes Restore good dev.tar.gz to rescue set appropriate binary property.
+ This fixes bug #950.
+kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
+ trying to switch drives by checking for blocking before unblocking.
+ Fixes bug #906.
+kes Cancel storage daemon in all cases where FD reports error. This
+ should fix virtually all cases of bug #920.
+12Sep07
+kes Fix error message that was clobbered when Dir tells SD it does not
+ have write permission on Volume. This should fix a minor point
+ in bug #942, but not the main problem.
+kes Add code to cancel job in SD if FD connection fails. This should
+ fix bug #920.
+kes Add code in FD exit to prevent loops and a crash on FreeBSD.
+kes Fix migration code to get correct Volume name with multiple volumes
+ by skipping |. Fixes bug #936.
+kes Implement patch supplied by Landon to fix bug #944 where using
+ TLS with bconsole uses 99+% of the CPU.
+kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
+ program.
+kes Move patches into patches directory.
+11Sep07
+ebl Fix bug #946 about "bacula-dir -t" which doesn't works
+ as expected.
+09Sep07
+ebl Using "m" in bconsole will show messages like before,
+ and not memory usage.
-kes Fix crypto when not using openssl. I previously overlooked this.
-kes Eliminate crypto type punning problems by eliminating void * and
- using uint8_t * instead.
-kes Harden authentication failure in FD by single threading errors
- and forcing a 6 second wait.
+Release Version 2.2.3
+kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
+ program.
+09Sep07
+kes Fix bug #935, and probably also bug #903 where files were not
+ restored. MediaId was not properly set in JobMedia record after
+ a Volume change.
+07Sep07
+kes Add ./configure search in qwt-qt4 for qwt package
+kes Apply Martin Simmons patch that should turn off the new API usage
+ when batch insert is turned off allowing building on older
+ PostgreSQLs.
- ===================== Warning =============================
- Removed 'Accept Any Volume' directive.
- ===========================================================
+Release Version 2.2.2
+04Sep07
+ebl Detect if new PosgreSQL batch insert API is present.
+kes Correct incorrect mempool call causing Director crash.
+sb Update spec files for 2.2.1 release
-kes Major cleanup and simplification of regress using shell functions
- (more tests to be converted to new format)
-kes Add detection of 64 bit Irix as indicated by user.
-kes Increment catalog database id from 9 to 10.
-kes Add a few of the new database fields to the various C++
- structures.
-kes Implement code to fill in the most important new fields (e.g.
- Media Enable).
-kes Ensure that most of the new fields are in create/get/insert/update.
- More work to be done.
-22Jun06
-kes Update some very old licenses in src/cats.
-kes Modify the database format for handling Migration jobs:
- Add PriorJobId, RealEndTime to Job table
- Delete MAC table
- Remove Stripe from JobMedia record (not used, wasting space)
- Add ScratchPoolId, RecyclePoolId, Enabled to Media record
- Add Cost to Location table.
-kes Delete mac_record subroutines.
-kes Add new table values to create/update/get routines as appropriate.
-kes Update the update_tables and make_tables scripts.
-kes Make a first cut in using a union where multiple pointers (actually
- pointers to pointers) are stored.
-kes Make some changes to base64.c suggested by Robert and others and add
- a small amount of documentation.
-kes Add some changes suggested by Peter for Solaris (bregex...)
-kes Make runscript.h always built because it needs to be pulled into
- more places. In particular its RES was left out of a union.
-kes Renumber the enum{} list in runscript.h to avoid starting from zero.
- This makes it slightly easier to detect uninitialized variables.
-14Jun06
-kes Remove xpg4 lib from FreeBSD build as it is no longer needed and
- sometimes creates install problems.
-kes Change a couple of %T in strftime to %H:%M:%S as seen in Robert
- Nelson's code. More to do.
-kes Convert a few store_bit to store_bool in filed_conf.c.
-kes DVD tweak to block.c as supplied by Uwe Muessel.
-04Jun06
-kes Modify configure.in to check for typeof().
-kes In findlib/attribs.c use typeof instead of templates if possible.
-01Jun06
-kes Implement partial error messages for src/filed/acl.c
-kes Fix return code to fail when doing update barcodes and
- Pool resource is not found. This previously caused Volumes
- to be labeled as cleaning tapes.
-kes Small updates to projects.
-27May06
-kes Add Eric Bollengier patch for new RunScript directive. It breaks
- compatibility between dird and fd.
-26May06
-kes Prevent DVD code from rewriting label if the device cannot be
- opened read/write.
-kes Used __GNUC__ to detect GNU g++ as suggested by John Goerzen to
- fix Debian build bug.
-kes Fix Dir/SD run race in migrate.c, verify.c, and restore.c
-kes Integrate manpages contributed by Jose Luis.
-kes Update projects file.
-kes Add manpages Makefile.in to configure.in
-kes Remove installation of bacula.8 in scripts directory.
-24May06
-kes Implement patch submitted by cesarb in bug #606 to implement O_NOATIME
- support.
- O_NOATIME is a open() flag which makes it possible to read a file without
- updating the inode atime (and also without the inode ctime update which
- happens if you try to set the atime back to its previous value). It also
- prevents a race condition when two programs are reading the same file, but
- only one does not want to change the atime. It's most useful for backup
- programs and file integrity checkers (and bacula can fit on both
- categories).
+Release Version 2.2.1
+30Aug07
+kes Update POTFILES.in
+kes Cleanup a few underquoted AC_DEFUNs in configure
+kes Apply patch from Martin Simmons that adds a test for va_copy to
+ ./configure
+29Aug07
+kes Fix bug 921 by increasing the number of tries to create a new volume
+ from 11 to 100.
+kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
+ can be called multiple times. Implement a version for machines
+ without va_copy() that gets a big buffer.
+25Aug07
+kes Integrate more portable zone offset code into bsmtp.c
+ Submitted by Attila Fülöp.
+24Aug07
+kes Fix bad SD->FD return status reported by
+ (James Harper) <james.harper@bendigoit.com.au>
+ebl Fix a bug in read_close_session which return random status
+ thanks to James Harper
+23Aug07
+kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
+ and directory names during restore of single file/directories.
+kes Add sanity checks to .sql command when string is empty. Hopefully
+ that will resolve Dirks Director crash.
+22Aug07
+kes Apply patch submitted by Martin Simmons that corrects a seg fault
+ in the bsmtp chat subroutine when debug is >= 10.
+21Aug07
+kes Fix Director crash when running bat SQL queries.
+kes Add David's notes on Item 8: Copy pools.
+18Aug07
+kes Rework projects file to be current and ready for a vote.
+kes Enhance lex scanner error message.
+17Aug07
+kes Tweak LICENSE file to mention BSD code.
+kes Fix bat.pro.in so that it includes the OpenSSL libraries only
+ if specified on the ./configure.
+kes Add first (not yet tested) cut of bcomm to the qt-console directory.
+ This class is intended to allow us to open a second bsock to the
+ Director while in the restore subdialog.
+16Aug07
+kes Fix configure to create bat Makefile before creating dependencies.
+kes Eliminate the egg files from the tray-monitor. Use gtk calls.
+kes Add a tooltip to the tray monitor.
+dvl Set the Director's PID file before dropping privs. This fixes
+ bug #923.
+15Aug07
+kes Update AUTHORs file
+kes Increase the default max concurrent jobs to 20 in FD and SD to
+ correspond with the default .conf files.
+kes Rewrite the Win32 service routines. This eliminates the 3 copies
+ some different, of the same file created by RN when porting the
+ Win32 SD and Dir.
+kes Rearrange some of the Win32 directories and the placement of the files
+ in them.
+kes Set DEVELOPER flag in version.h
- Recent versions of the Linux kernel and glibc have support for it (the
- glibc support being mostly copying the O_NOATIME definition to
- bits/fcntl.h). If there's no support for it on the kernel, trying to use
- it does nothing (since the kernel ignores unknown flags).
+========================================================================
+Release Version 2.2.0
+09Aug07
+kes Apply a second doc patch from Marc.
+kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
+ improves the tips section that discusses how to setup multiple
+ simultaneous jobs.
+08Aug07
+kes Update bat README file.
+kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
+ corrects a typo in the Recycle status check in db_find_next_volume().
+ This will probably fix a number of annoying problems with multiple
+ Recycled volumes.
+kes Modify most of dird/msgchan.c to use bsock class calls rather than
+ bnet calls -- no functionality change.
+07Aug07
+kes Modify the Verify output to specify if files are missing on
+ the Volume(s) or disk. Fixes confusion in bug #916.
+kes When more than one Volume is read in a migration job, the last
+ Volume bytes reported are from the last read volume rather than
+ the last written volume. Fixed. This fixes bug #910.
+kes Fix display of Recycle flag after update volume=foo recycle=yes.
+ It previously printed New Recyle flag is: no. This fixes bug
+ #917.
+06Aug07
+kes Correct seg fault when switching tape drives during restore.
+kes Commit uid_gid_name.c (replacement for idcache.c), but will not
+ be used until after 2.2.0 release.
+04Aug07
+kes Remove fnmatch() in SD that permitted wild card specifications.
+ This fixes bug #914.
+31Jul07
+kes Fix %g in filename returned by SQL for browse tree reported by
+ Dirk.
+kes Fix configure so that it puts config.out in the cwd rather than
+ in src/qt-console
+kes Attempt to fix the locking problem reported by Eric in bug #906.
+kes Make berrno class to leave errno unchanged after constructor call.
+kes Make bnet_server use the heap rather than the stack to allocate
+ its socket fd pointers to avoid a crash at termination. Problem
+ reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
+30Jul07
+kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
+ and putting it in depkgs-qt along with Qt4.3.
+29Jul07
+kes Rework code in acquire.c that switches drives for reading when
+ the Media Type does not match. This should fix bug #906
+28Jul07
+ebl Fix a director segfault during job setup #907
+kes Correct seg fault in postgresql when first operation returns no
+ rows. Fixes Dirks File browser problem seg fault with bat.
+25Jul07
+kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
+ building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
+ 2.6 as well).
+24Jul07
+kes Implement PopUp YES/NO dialog for bat.
+23Jul07
+ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
+22Jul07
+kes Correct RunScript to terminate job in FD on failure.
+kes Change abort_on_error and AbortJobOnError to fail_on_error
+ and FailJobOnError in RunScripts.
+kes Minor tweaks of code formating in RunScripts, principally to
+ avoid depassing 80 columns.
+21Jul07
+kes Eliminate one #ifdef Win32 in bsmtp
+kes Implement grow tool to grow a file for testing very large databases.
+kes Add big-vol-test to test Bacula seeking with > 5GB.
+Release 2.1.28 beta
+19Jul07
+kes Modify find_next_volume() to return all values in Media record.
+kes Ensure that we keep Recycle Pool when moving Scratch volumes.
- If the kernel has support for it, trying to use it either works, fails
- silently (mostly in remote filesystems), or returns errno=EPERM (if you
- are not either the owner of the file or root). A simple way to prevent the
- failure is to open the file without the flag and set it later with
- fcntl(F_SETFL), ignoring any EPERM errors.
-kes Applied patch posted by Jaime Ventura to bug #570 to correct failure
- of restarted jobs to complete (due to a destroyed pthreads conditional
- variable used by the message thread).
-kes Fixed bug #619 where Bacula would not restart jobs with MaxRestartTimes
- set to zero.
-kes Apply patch from John Goerzen bug #611 to fix bad manual links in the code.
-kes Apply patch from Rudolf Cejka bug #614 to removed trailing
- colons in query.sql file.
-kes Apply patch from Rudolf Cejka bug #613 to correct prunning of files
- not to create orphans.
-kes Apply patch from Rudolf Cejka bug #617 to use mtime instead of ctime
- in restore long listing.
-kes Apply patch from Rudolf Cejka bug #609 to use MarkId in verify.c instead
- of incorrect MarkedId.
-kes Apply patch from adioso bug #616 to correct text in manual (replace
- Director with File daemon).
-kes Rework a few of the zlib changes so that they build properly.
+Release 2.1.28 beta
+18Jul08
+kes Update Release notes
+17Jul07
+ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
+ Warning, in previous beta version, all media get from scratch keep their
+ old retention.
+16Jul07
+kes Tweaked Win32 installer to remove temp conf files at uninstall time.
+ This should fix bug #842. Made a note to look at removing the temp
+ files at the end of the install.
+kes Add ability to mount and unmount a file device providing it is
+ marked as being removable and has the appropriate mount and unmount
+ commands defined in the Device resource. This fixes bug #830.
+kes When applying a storage override, release all previous storage
+ definitions rather than just prepending the new storage.
+ This should prevent a good deal of confusion.
+14Jul07
+kes Implement ./configure search for qwt libraries.
+13Jul07
+kes Disable posting the WM_CLOSE message in KillRunningCopy of the
+ Win32 FD. This should fix bug #893.
+kes Remove an unnecessary beep in Win32 init code.
+kes Update copyright dates in Win32 executable about boxes.
+kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
+ code with a BSD getopt.c and getopt.h.
+kes Remove sched.h from the Win32 compat directory -- not used.
+kes Remove the Exit menu item from the Win32 tray monitor. If you really
+ need to shut it down, do it through the services panel or the command
+ line.
+kes Remove some inappropriate Bacula FSFE copyrights.
+ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
+kes Fix regress config non-portable test as pointed out by
+ Florian Heigl <florian.heigl@gmail.com>
+kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
+ as pointed out by Florian Heigl <florian.heigl@gmail.com>
+12Jul07
+kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
+ Reported by Frank Sweetser.
-21May06
-kes Move DIR 'run' command to SD before starting the message thread
- as suggested by Cristopher Hull to avoid a race deadlock from
- two threads using the bsock structure.
-kes Modify LICENSE to correct some problems pointed out by Debian.
-05May06
-kes Correct EOF with no \n lex.c problem.
-kes Tweak compat.h compat.cpp and merge with apcupsd
-kes Add additional INFO messages if autochanger cannot be used.
+Release 2.1.26 beta
+12Jul07
+kes Fix client-only build.
+kes Integrate client-only fixes for bsys (initgroups) and conio from
+ Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
+kes Make arguments to get_scratch_volume() in same order as other
+ such calls.
+kes Rework the prune_volumes() subroutine so that after purging and
+ no volume found in desired pool, it will check for a scratch
+ volume. This prevents recycling the whole scratch pool.
+kes Add code to status storage to print boffset_t (largefile support).
+11Jul07
+kes Move qwt (Graphics libarary for Qt4) to depkgs.
+kes You now need a --with-qwt=<dir> to be able to build bat.
+kes Update src/win32/cats/bacula_cats.def to include the new
+ db_get_query_dbids() call on Win32.
+07Jul07
+kes Correct a problem when selecting a scratch volume and moving
+ it to another pool that lost some columns.
+kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
+kes Enhance Autochanger error messages to include Volume and device name.
+kes Rework prune_volumes() code to take account of InChanger flag,
+ and to handle recycling volumes going to the Scratch pool and
+ current pool because the RecyclePool directive.
+kes Implement a better and more efficient db_get_query_dbids() to
+ handle creating and passing back a list of DBIds.
-02May06
-kes Simplify Win32 Makefile
-kes Correct count of buffers/bytes used by smartall.c
-kes Updated compat.h after porting apcupsd to MinGW.
-01May06
-kes Work on getting wx-console building on MinGW. wxWidgets now builds
- started adding Makefile ...
-kes Moved MinGW library objects to src/win32/lib to reduce clutter.
-30Apr06
-kes Reloading a bad configuration file doesn't kill director any more.
- Thanks to fix from Eric Bollengier.
-29Apr06
-kes Fix problem of accents with new Win32 code.
-kes Integrate Howard's VSS patch. Tweak it a bit. VSS now
- works in the MinGW build with the exception that there
- is a problem with accented characters -kes i.e. there is
- some mapping problem with wide characters.
-kes The code no longer compiles with Microsoft VC++.
-28Apr06
-kes Start implementing Christopher's St.Bernard code.
-kes Add Christopher's mods for opening files.
-kes Strip \r \n from Win32 error messages (Christopher)
-kes Add more info about Win32 system if unknown (Christopher)
-kes Use bstrn(cpy, cat) routines to avoid overrun in compat.cpp
-kes Fix a number of incorrect strings marked for translation, when
- they should not be (e.g. commands).
-kes Fix StartTime bug reported for ClientRunBeforeJob and RunBeforeJob
- Patches supplied by user in bugs #608 and #599.
-kes Use most recent of st_ctime and st_mtime in restore tree DIR
- listing. This fixes some problems with Win32 printing incorrect
- values.
-kes Correct the clock shift comm time calculation between the DIR
- and the FD. It was added rather than subtracted.
-kes Strip all backslashes in filenames to be restored on Win32
- machines -kes the names should all be in Unix format, and if
- there are any backslashes it is most likely due to an improper
- FileSet definition, and the files will not otherwise be
- restorable.
-kes Remove lib/regex.c (replaced by bregex.c).
-kes Delete src/win32/License.txt
-kes Modify installer to install LICENSE
-26Apr06
-kes Fix bug in build-win32-cross-tools script reported by Howard
-kes Implement cross compiled bconsole
-25Apr06
-kes Fix barcode test, eliminate BOOL (doesn't exist on Linux).
-kes Write first cut of README.mingw32
-kes Add back ua_label barcode fix from Rufolf Cejka.
-kes Integrate the majority of the Mingw cross-tools submission
- made by Howard Thomson. Everything compiles, with zlib, openssl,
- and VSS turned off. Linking needs a pthreads library ...
-23Apr06
-kes Add 'Dir Status' button to the gnome console.
-kes More work on migration.
-kes Restore non-compatible base64 coding to permit compatibility.
-kes Display heap stats in Storage daemon without debug level.
-22Apr06
-kes Integrate most of the MinGW changes -kes more to do.
-21Apr06
-kes Implement using pg_config for finding PostgreSQL files.
- Fixes bug #600. Patch supplied by user.
-kes Remove -t option from mktemp in mtx_changer.in and use
- working directory. Fixes bug #578.
-kes Update job start time after the any run before job so that
- files created by the script are only backed up once. Fixes
- bug #599.
-kes Strip trailing newline only from filenames entered in
- the restore command when reading a file. This permits
- the user to enter filenames with trailing spaces. Fixes
- bug #549. The user supplied a patch that I modified slightly.
-kes Use the most recent time (st_mtime, st_ctime) in the dir
- command in restore. This gives the user a better idea of what
- the newest file really is. This fixes bug #574. The fix
- was suggested by the user.
-kes Implement a compatible version of base64. This permits external
- programs to duplicate Bacula's base64 algorithm using standard
- routines. This fixes bugs #296, and 565. Patch submitted by
- author of bug #565.
- ================= Note ========================
- Previous Signatures stored in the database are no longer
- compatible with this. The main downside is for Verify jobs,
- and doing an InitCatalog run will fix the problem. Also, the
- authentication between the deamons is changed, so all daemons
- must be simultaneously upgraded.
- ==============================================
- If you don't like this fix, set:
- const bool compatible = true;
- to
- const bool compatible = false;
- in src/lib/base64.c
-20Apr06
-kes Ensure that DB signature is never NULL.
-kes Ensure that DB table names are not translated.
-kes Fix scheduler to handle time skew (eg daylight savings).
-kes Fix scheduler to use lock_jobs() to avoid most problems
- with reload. Window is now milliseconds.
-19Apr06
-kes Apply patch from Christopher Hull
- kes Allow multiple connections to database with different
- parameters.
- kes Invalidate the scheduler when doing a reload. Fixes seg
- fault, but still 60 second window.
- kes Additional info in Reschedule message.
- kes Use set_jcr_job_status() everywhere to prevent loss of
- cancel, error.
- kes Display peer IP in FD if error from connecting DIR.
- kes Don't increment file count for DIRBEGIN.
- kes Replace illegal characters in Win32 filename by _.
- kes Add SE_CREATE_PERMANENT_NAME privilege in Win32.
- kes Hash hard link filenames rather than linked list.
- kes Fix for security failure in chdir on Win32.
- kes Add CreateDirectoryA/W win32 API entry points.
-kes Add /silent option to Win32 FD for Install/Remove service.
-kes Always print Heap statistics in FD.
-18Apr06
-kes Remove the -f option from the chown in Makefile.in for more
- portability.
-kes Change setting the group in Makefile.in to use chgrp for
- more portability.
-kes Implement a write_store and read_store to replace
- dirstore in reserve.c
-kes Implement a Bacula read/write lock for Python rather
- than using the Python lock to avoid recursive problems.
-kes Correct the uninstall directory names in filed/Makefile.in
- as reported by a user.
-17Apr06
-kes Correct some problems with database creation (new tables).
-kes Replace a bunch of old 0x%x by %p.
-kes Get first cut of Migration with Job selection working.
-16Apr06
-kes Change store_bit() to store_bool() for the Spooling in
- dird_conf.c -kes bug reported by Robert Nelson.
-15Apr06
-kes Correct Makefile bug found by Dan Langille.
-14Apr06
-kes Correct Makefile for Solaris /bin/sh
-kes Correct mtx-changer.in for Solaris /bin/sh
-kes Abort if a conf resource does not have a Name =
-12Apr06
-kes Change the name of the regex program to bregex.
-kes Add the bwild program to the tools directory. It is similar
- to the bregex program.
-kes Implement create bregex.h and bregex.c in src/lib from the
- Python regexp program.
-kes Use the new bregex.c to implement Regex expressions on Win32.
-11Apr06
-kes More work on migration.
-kes Implement wild program in tools directory for testing
- wild-cards. Almost identical to the regex program.
-kes Up port VSS single thread locking code.
-kes Replace N_(..) by NT_(...) to inhibit translation of
- commands.
-kes Modify Makefile to change the permissions on Working Directory
- to 770 if the directory is created.
-kes Do not fail the Makefile if changing the permissions or
- owner/group on WorkingDir fails.
-kes Remove early selection of Scratch Volumes in the recycling
- algorithm.
-kes Correct the old recycling algorithm so that Scratch Volumes
- are selected when looking for a Volume in the changer.
-kes Correct a typo in the Verify SQL reported by Joe Park.
-10Apr06
-kes Remove automatic case folding on Windows FDs. You must
- explictly use the 'Ignore Case = yes' option.
-kes Remove the code added to 1.38.6 and 1.38.7 that pulls a
- scratch volume in an Autochanger early in the 'recycling'
- algorithm.
-09Apr06
-kes Make weof() and clrerror() methods of class DEVICE.
-08Apr06
-kes Tweak license to include Microsoft restrictions.
-kes Move mysql.reconnect to after real_connect(). Thanks to
- Frank Sweetser for the patch.
-kes Disallow a backslash in a File = directive (Windows junk)
- unless the string is quoted.
-kes Apply Eric's patch to ua_label.c so that daemon protocol
- is not translated.
-kes Add NT_ definition for strings that should not be translated.
-kes Apply NT_() to ua_label.c
-kes Remove timed wait for VSS on Win2K3 as it is not yet
- implemented.
-kes Correct bacula.in script to reference bacula-ctl-xx in the
- sysconfig directory rather than the bin directory.
-26Mar06
-kes Fix a long standing bug in the bacula start/stop scripts.
-kes Attempt to add the new bacula-ctl-* files to the rpm.
-kes Switch to using typeof() for list traversing to avoid
- as many FC5 g++ compiler warnings as possible.
-25Mar06
-kes Split the bacula start/start script into four files:
- bacula -kes starts and stops calling other scripts
- bacula-ctl-dir -kes starts/stops the director
- bacula-ctl-fd -kes starts/stops the File daemon
- bacula-ctl-sd -kes starts/stops the Storage daemon
-24Mar06
-kes Create datestyle fix for PostgreSQL. Fixes bug #574.
-kes Correct editing of JobId from int to int64 in fd_cmds.c
-kes Eliminate FileSet name race with bash_spaces() and multiple
- threads by bashing in a local.
-kes Fix error return from 'use storage' to print a correct error
- message rather than nothing.
-kes Correct false re-read last block error message when two jobs
- are simultaneously writing at the end of a tape.
-kes Simplify exit conditions in the reserve.c code to avoid
- possible non-release of reservation_lock().
-kes Suffle lock order in reserve to avoid deadlock between
- reservation lock and device mutex.
-21Mar06
-kes Initialize jcr mutex before first use. Thanks to Thorsten for
- tracking this down for me !!!! as it broke the Win32 build.
-20Mar06
-kes Integrate addition of line count limitation to bsmtp -l from
- Sebastian Stark <stark at tuebingen.mpg.de>
-17Mar06
-kes Implement regex test program in tools directory.
-kes Attempt to fix time problem with bsmtp with foreign langs.
-kes Add strip_trailing_newline() submitted by user.
-kes Implement regex matching in migrate.c
-16Mar06
-kes Fix bug #537 to allow arbitrary time to mount a volume for
- restore, if polling is turned on.
-kes If dir_user or dir-group is specified in ./configure apply it to
- the working-dir. Fixes bug #533.
-kes If rescheduling a job cancel the previous incarnation with the SD.
- Fixes bugs #566 and 557.
-kes Fix bug #567 do_message() definition type conflict.
+Release 2.1.24 beta
+03Jul07
+kes Start work on new more efficient DBId subroutine. First use
+ will be for recycling volume to Scratch inchanger.
+kes Increase number of JobIds in pruning from 1000 to 10000.
+ This to be replaced by above routine.
+kes Begin implementation of building Qt4 on Win32.
+kes Correct typo in fix I added for bad TLS shutdown.
+kes Pull 2.0.3 patches into patches directory.
+kes Update Release notes. Include qt-console in line count.
+kes Update Projects file.
+30Jun07
+kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
+ bug in migration code where a job that spanned two volumes
+ was migrated twice.
+29Jun07
+kes Implement new BST_DESPOOLING blocked state. Change from locking
+ during despooling in SD to blocking. This means that other threads
+ can work with the device structure, in particular the reservations
+ system while despooling.
+28Jun07
+kes Fix return in reservation message queue that missed clearing
+ the jcr lock (implemented 26Jun07 below).
+kes Rename a number of dev methods to make locking function names
+ a bit clearer.
+kes Document locking in lock.c. Move lock structures to new file
+ lock.h.
+26Jun07
+kes Move reservations message lock to lock jcr only this
+ fixes bug #861.
+kes Move main SD locking code into lock.c (new file).
+kes Update Win32 build to include lock.c
-14Mar06
-kes Add more jcr methods and make mutex and use_count private.
-kes Create lock/unlock methods for jcr.
-kes Fix PostgreSQL bug doing sql_data_seeek() by explicitly reading
- records to get to seek position.
-kes Integrate patch from bug #561 to correct conio.c signal definitions.
-kes Fix Rescheduling failed Jobs. Ensure that SD message thread
- terminates correctly by doing pthread_kill(). Do not destroy
- SD cond wait variable between executions of the job. Use local
- mutex for cond variable to avoid blocking jcr chain. Fix poor
- use of jcr use count in jobq.c for restarted jobs.
-kes Fix obsolete usage of foreach_dlist() to use foreach_jcr() in
- lib/jcr.c -kes prevents locking the jcr chaing.
-kes Apply patch from bug #564, which corrects listing volumes with
- multiple autochangers. Apply same fix to next volume list.
-kes Fix bug #562 where restore bootstrap file is not unique.
-kes More details in implementing David's migration syntax proposal.
-kes Save and restore dcr when swapping drives so that if we have
- a write dcr it is not lost.
-kes Use new routine lock_reservations() to lock the reservations
- system, and call it while looking for a volume in askdir.c.
- This could possibly fix bug #543.
-kes Stop SD command loop if job is canceled.
+Release 2.1.22 beta
+26Jun07
+kes Dirk committed the qwt library code for drawing graphs in bat.
+kes Tweak install of qwt so that it is integrated with ./configure.
+25Jun07
+kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
+ out by Eric (my typo).
+ebl Fix configure.in to get batch mode enable
+kes Return correct string from authenticate.cpp in bat when connecting
+ to Dir.
+kes Apply patch suggested by Frank Sweetser to fix bug #888 --
+ spurious line drops when using TLS.
+kes Do not file reparse points when restoring a file that already
+ exists -- Win32.
+24Jun07
+kes Implement Windows reparse points -- similar to directories, but
+ we do not descend into it. This is a first cut. They seem to
+ be backed up, but restore is not yet tested.
+kes Remove restore_blocking in tls code when shutting a socket to leave
+ it in blocking mode. Hopefully this will fix the encryption bug
+ reported by Frank Sweetser.
+kes When opening a file for backup, tell the OS that we are going to
+ read it sequentially -- optimization.
+kes Change variable names in authenticate_director() to not conflict
+ with member names in bat. Caused great confusion with compiler,
+ but no warnings.
+23Jun07
+kes Queue openssl error messages in case of comm problem.
+kes Do shutdown() call if socket terminated.
+kes Remove some duplicated code in tls.c
+kes Move more of the bsock member variables into private and access
+ them with methods.
+kes Add Frank Sweetser's tls-test to the regression suite.
+22Jun07
+kes Add Swedish sv.po file
+21Jun07
+kes Don't print clock skew message in FD if less than 3 seconds diff.
+kes Add a bit of VSS info to status client.
+kes Implement a first cut of Vista VSS, using Win2003 code.
-08Mar06
-kes Remove old code from findlib/create_file.c
-kes Rename mac.c migrate.c
-kes Add user friendly display of VolBytes in job report.
-kes Rename target... to previous... to make it a bit easier to
- understand.
-kes Add selection type and selection pattern to Migration (idea
- given by David Boyes).
-04Mar06
-kes The po files should now be current.
-kes Fix new sql_use_result() code to properly release the
- buffers in all cases.
-kes Use the keyword ujobid to mean the unique job id; job or jobname
- to mean the Job name given on the Name directive, and jobid to
- be the numeric (non-unique) job id.
-kes Allow listing by any of the above.
-kes Add the user friendly job report code for reporting job elapsed time
- and rates with suffexes from John Kodis <kodis at comcast.net>.
-kes Add Priority and JobLevel as Python settable items.
-kes Use TEMPORARY table creation where the table is created by
- Bacula.
-kes Add new code submitted by Eric for waiting on specific jobid.
-kes Add ACL checking for the dot commands.
-kes Fix restore of writable FIFOs.
-kes Fix a bug in bpipe where the string was freed too early.
-27Feb06
-kes Modify the Python class examples to inherit object -kes new way
- of defining classes. Patch from Felix Schwarz.
-kes Implement jobuid to replace old usage of job in keywords as
- suggested by Eric Bollengier.
-kes Apply patch for enhancing wait from Eric Bollengier. On can now:
- wait (wait for all jobs to stop)
- wait jobid=nn
- wait jobuid=unique id
- wait job=job-name
-kes Implement write variables for Python to set Priority (anytime), and
- Job Level, only during JobInit event.
-26Feb06
-kes Fix the block listing bug pointed out by Arno.
-kes Update the po files at Eric's request.
-24Feb06
-kes Fix Maximum Changer Wait, Maximum Open Wait, Maximum Rewind Wait to
- accept time qualifiers.
-kes Make catalog respect ACL.
-kes Add recycle count to Media record.
+Release: 2.1.20 beta
+20Jun07
+kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
+ loaded tape but uses first drive).
+kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
+ This was indeed a Win32 issue.
+19Jun07
+kes Simplify search of autochanger for in-use Volume.
+kes Fix exit condition of check for in-use volume. kes Remove
+ inappropriate my_postgresql_free_result() in db_close()
+ routine.
+kes Fix bad return in FD when encryption signature not found.
+ Probably caused a crash.
+kes Inhibit missing encryption signature error messages for
+ file types where no signature computed.
+kes Correct inverted check on autochanger in reservation system.
+kes Tweak debug code in autochanger reservation.
+18Jun07
+kes Add some additional locking in the cats directory in subroutines
+ that modify packet variables called from batch insert.
+kes Rework how dcrs are allocated. new_dcr() can now be called
+ with an existing pointer, and it will simply clean it up.
+ This allows the reservation system to test various different
+ devices, and will permit easy device changes.
+kes A bunch of changes all over to handle new new_dcr() calling
+ sequence.
+kes Work more on the Volume management in the SD. Remember Volumes
+ for tape drives and for autochangers (even virtual disk changers).
+kes When looking at the Volume list to reserve a drive, handle
+ autochanger names correctly by interating through the changer
+ devices. Also call the Director to see if a Volume is suitable
+ for the current job.
+kes Fix some bugs in bscan. Make sure all media records are written.
+ Make sure that valid JobMedia records are written for disk files.
+ Previously they were completely wrong.
+kes Move source tar files for depkgs-mingw32 to www.bacula.org so
+ that the URLs don't change and so that the developers will all
+ work off the same copy. Rebuild from scrach.
+kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
-Changes to 1.39.6-beta1 24Feb04
-23Feb06
-kes Add Rudolf Cejka's new rc-chio-changer.
-kes Implement pulling Volume from Scratch Pool if the
- Volume is in the autochanger.
-kes Implement additional command arguments for update Volume.
+Release: 2.1.18 beta
+16Jun07
+kes Fix seg fault in FD from incorrect digest size.
+kes Fix argument to non-OpenSSL crypto.c subroutine.
-Changes to 1.39.5
-22Feb06
-kes Back port changes to 1.38.5
-kes Fix recycle SQL for StorageId.
-kes Fix misplaced quote in mtx-changer script.
-20Feb06
-kes Note. Your database must be updated, or you must create
- a new database. I have not yet incremented the database level.
-kes Add Location table.
-kes Add LocationId, DeviceId, and MediaTypeId to Media record.
-18Feb06
-kes Implement create/get mac record in database for adding extended
- Migration data to the job record.
-kes Add new MAC table to update/make database scripts.
-kes Return Storage name used when getting VolumeNames for a job.
-kes Change bsr file keyword Storage to Device, which is more accurate.
-kes Ensure that Mac records are pruned/purged.
-kes Tweak SD tools to deal with changing media type.
-kes Integrate more dev.c subroutines as methods (e.g. strerror, bsr, ...)
-kes Pass pointer to dcr pointer to acquire_device_for_read() so
- that the subroutine can switch devices, and hence dcrs.
-kes Modify the multiple MediaType read code to re-use the same
- dcr when switching devices. This makes the code much more
- robust.
-kes Integrate patch from Karl Hakimian that reads JobIds, FileIndexes
- from a table for restore.
-kes Add Storage name to VolParams, but it really should be Device.
-14Feb06
-kes Add disk-changer to scripts directory + configure/Makefile
-kes Eliminate PoolId from jcr -kes it is in jcr->jr.PoolId
-kes Implement store_bit scanner to replace store_yesno. Mostly done.
-kes Implement new store_bool that stores in a bool.
-kes Add true/false to yes/no conf directives.
-kes Make first cut at changing appropriate store_yesno to store_bool.
-kes Complete implementation of Pool storage devices.
-kes Move starting clones to job.c
-kes Move create_restore_bootstrap_file() to job.c
-kes Make copy_storage() more general to be able to handle
- Pool storage.
-kes Cleanup a lot of migration code for manual running, including
- using Pool storage.
-kes Move getting a scratch Volume into a subroutine.
-kes Make all places a Volume that is added to a pool to
- respect max vols.
-kes Fix bug in autochanger recycle code (improper edit 64 bit).
-kes Fix segfault in restore command when no value specified.
-kes Start adding code to handle multiple MediaTypes in restore.
-kes Eliminate race condition in getting Volume name for
- two drive autochanger.
-kes More debug code in autochanger.
-kes Add storage keyword to bootstrap file, add parsing.
-kes Move slot in bsr file into Volume record as there will be
- a different slot for each Volume.
-kes Create reserve.h
-07Feb06
-kes Implement Pool storage overrides.
-06Feb06
-kes Implement first cut of Migration.
-kes Implement mysql_use_result() from patch by Karl Hakimian.
- This reduces significantly the memory consumption during
- the restore tree building, and hence runs faster too.
-kes Implement StorageId patch supplied by user (reggie) in bug
- #536. This should permit Bacula to work correctly with two
- autochangers.
-kes Implement Job listing variations suggested by a user.
-kes Move updating bootstrap code in backup.c to subroutine
- update_bootstrap_file().
-kes Add new job status elapsed time and bytes written user
- friendly job report output patch sent by John Kodis
- <kodis at comcast.ne>.
-kes Implement a storage list in Pools.
-kes Separate out setup_job() code from run_job().
-kes Get migration working -kes lots of changes in mac.c in both
- DIR and SD.
-kes Apply patch from user (Eric Bollengier I think) that fixes a
- DIR crash when no arguments are supplied to a dot command.
-kes Fix typo (strcpy->strcmp) in ua_prune.c as reported by Martin.
-kes Fix command arg name->volume in label command of gnome-console.
-kes Fix SD acquire.c to release correct DCR by explicitly testing
- on the dcr address rather than trying to devine if it is a read
- or write dcr. This failed in error conditions when the device was
- not fully setup.
-
-30Jan06
-kes Apply user supplied patch for more readable rate output
- in job report.
-kes Continue implementing migration.
-kes Implement support for removable filesystems in SD.
-kes Ensure that btraceback scripts can be read by anyone.
-kes Replace dvd-freespace and dvd-writepart by dvd-handler.
-kes Correct bug where canceling restore before the FD contacts
- the SD causes the drive to be left in read mode.
-kes Move ofline_or_rewind into DEVICE::close().
-kes Eliminate close_device.
-kes Convert several dev subroutines to methods (e.g. bsf,
- eod, ...)
-kes Eliminate force_close_device().
-kes Implement Device Type directive in Device resource that
- can have values File, Tape, Fifo, DVD, or Prog.
-kes Add has_cap() method to Device.
-Changes to 1.39.4
-17Jan06
-kes Add patch from bug #527 to allow RedHat user to specify
- options/user/group for starting each daemon in
- /etc/sysconf/bacula.
-16Jan06
-kes Add two new queries to query.sql provided by Arno. One
- list volumes known to the Storage device, and the other
- lists volumes possibly needing replacement (error, ...).
-15Jan06
-kes Add periodic (every 24 hours) garbage collection of memory
- pool by releasing free buffers.
-14Jan06
-kes Correct bug counting sized (for display only) in smartall.c
-kes Print FD mempool stats if debug > 0 rather than 5.
-12Jan06
-kes Make db_lock() mutex error fail the job rather than abort
- Bacula. Canceling the job caused the mutex to fail.
-kes Correct bug in alist.c that re-allocated the list if the
- number of items goes to zero.
-kes Move the reservation system thread locking to the top level
- so that one job at a time tries all possible drives before
- waiting.
-kes Implement a reservation 'fail' message queue that is built
- and destroyed on each pass through the reservation system.
- These messages are displayed in a 'Jobs waiting to reserve
- a drive' list during a 'status storage='. Note, multiple
- messages will generally print for each JobId because they
- represent the different problems with either the same drive
- or different drives. If this output proves too confusing
- of voluminous, I will display it only when debug level 1
- or greater is enabled in the SD.
-11Jan06
-kes Add enable/disable job=<job-name>. This command prevents
- the specified job from being scheduled. Even when disabled,
- the job can be manually started from the console.
-kes During 'update slots' clear all InChanger flags where the
- StorageId is zero (old Media records).
+Release: 2.1.16 beta
+16Jun07
+kes Remove a few malloc()s from the encryption code.
+kes Use the class calls to bsock in filed/backup.c and restore.c in
+ place of the old bnet_xxx code.
+kes Implement code that does an on the fly calculation of the
+ signing digest during restore of encrypted files. It makes
+ a best guess at the algorithm, and if it is not correct, will
+ then revert to the old code which reads the file after it is
+ restored.
+kes Implement at least one missing crypto stream in stream_to_ascii()
+kes Apply patch from William <chowmeined@gmail.com> that fixes bug
+ #877 where a reload with bad syntax causes Dir to exit.
-Beta release 1.38.4:
-09Jan06
-kes Fix autochanger code to strip leading spaces from returned
- slots number. Remove bc from chio-changer.
-kes Back port a bit of 1.39 crypto code to reduce diffs.
-kes Fix first call to autochanger that missed close()ing the
- drive. Put close() just before each run_program(). Fixes
- Arno's changer bug.
-07Jan06
-kes Add PoolId to Job record when updating it at job start time.
-06Jan06
-kes Pull in more code from 1.39 so that there are fewer file
- differences (the new ua_dotcmds.c, base64.h, crypto.h
- hmac.c jcr.c (dird and lib) lib.h md5.h parse_conf.c
- util.c. Aside from ua_dotcmds.c these are mostly crypto
- upgrades.
-kes Implement new method of walking the jcr chain. The
- incr/dec of the use_count is done within the walking
- routines. This should prevent a jcr from being freed
- from under the walk routines.
+Cut: 2.1.14 beta (not released)
+14Jun07
+kes Do not free a volume on a tape drive until another volume is
+ mounted and read, or the autochanger unloads the volume.
+ This should help the SD re-use volumes that are already mounted,
+ and should fix bug #886.
+kes Apply patch from user brettedgar that allows gnome2-console include
+ the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
+kes Apply patch from Lucien Weller that fixes day of week calculation
+ because of DST flag problem. Fixes bug #887.
+10Jun08
+kes Move find_next_appendable_volume() to after acquiring a valid device
+ in reserve.c. This fixes bug #864 -- confirmed by reporter.
+09Jun07
+kes Unable to reproduce bug 872. However added additional testing for
+ integer.
+kes Bug #874 resolved by documenting SQLite limitations.
+kes Bug #882 resolved by documenting mtx-changer script for new drive code.
+kes Bug #881 resolved by removing typo in mtx-changer script.
+kes Made Frank Sweetser's wiki the official Bacula wiki with his
+ approval. Added a link to the wiki on the web page, and implemented
+ a backup from http://paramount.ind.wpi.edu
+08Jun07
+kes Fix update allfrompool to pass pool name.
+07Jun07
+kes Convert to pure GPL v2 license.
+kes Fix sscanf problems reported by Peter Buschman that caused
+ a bus error on Solaris.
+kes Rework (simplify) the select prompt in bat.
+kes Move get_jobid_from_tid() into lib and create a
+ get_jcr_from_tid().
+kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
+ should definitely fix the problem of lost error messages in the
+ encryption code.
+kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
+kes Eliminate tcpd.h from the project. Enclose the #include from the
+ library with extern C ...
+kes Add print of signal name when a signal is trapped.
+Release: 2.1.12 beta
+04Jun07
+kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
+03Jun07
+kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
+ query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
+ makes SQLit3 run 30 times faster, though a bit less safe.
+kes Implement --with-batch-insert in configure and detection of thread
+ safe libraries. It is on by default, but turned off if no thread
+ safe library (e.g. SQLite 2) is available.
+02Jun07
+kes Fix Bacula PostgreSQL buffer overruns.
+kes Do better checking for NULL results returned from PostgreSQL;
+ implement retry for failed queries; clear results buffer after
+ failed query. Hopefully this will correct the PostgreSQL failures.
+01Jun07
+kes Implement algorithm to handle only one appendable volume with
+ Prefer Mounted Volumes = no.
+kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
+ returned from a query.
+kes Make volume lock recursive.
+kes Implement an additional volume reservation algorithm that
+ starts by considering all reserved volumes then uses the
+ old brute force algorithm of searching the resources to
+ find a suitable device.
+kes Add new reservations debug code and refine the old code.
+kes Update the win32/dll/bacula.defs file.
+29May07
+kes Tweak reservations algorithm to permit a few more cases, i.e.
+ volume reserved, but on different drive, ...
+kes Enhance SD status to include Pool and Media Type for drive in a
+ more readable format (a bit longer).
+kes Fix PostgreSQL double free.
+28May07
+kes Minor refactoring of restore decryption code.
+kes Add code to smartall.c to detect double free of a buffer.
+27May07
+kes Add < > around %r in from field on mail command of bacula-dir.conf.in
+ so that bsmtp will create a correct email address (mailbox only).
+kes Modify 'memory' command so that the buffers are listed as 'In use'
+ to avoid confusion with Orphaned buffers.
+kes I reworked the OpenSSL include/lib flags to be handled in
+ the standard Bacula way, which should fix bug #863 concerning
+ non-standard OpenSSL libraries.
+26May07
+kes Implement Help Browser window for bat.
+kes Fix reload bug that reset StorageId to zero.
+25May07
+kes Fix TLS #ifdefing when TLS turned off.
+kes Ensure that when labelling a tape with Slot=0 that InChanger
+ is not set.
+kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
+ the same.
+kes Add StartTime to final uar_sel_jobid_temp query so that we can
+ add DISTINCT (required by PostgreSQL).
+kes Implement BSOCK authenticate_director() method. Eventually will
+ authenicate all daemons.
+kes Move several more functions into the BSOCK class.
+24May07
+kes Add code to tell the OS that we no longer need a cached
+ file that we were reading. In findlib/bfile.c. Also,
+ only cache files that we are reading. Thanks to
+ Tobias Oetiker <tobi@oetiker.ch> for the idea.
+kes Tweak to bsmtp to eliminate compiler warnings on Win32.
+kes Implement script to automatically generate cats and dll .def
+ files for Win32 dll.
+kes Update README.mingw32 to include new .def file generation.
+kes Correct typo in UTF-8 error message as reported by:
+ jhernandez <julianhernandez@gmail.com>
+kes Add additional sm_check() code on debug level 1.
+kes Set default debug level to 1.
+kes Trap SIGABRT in attempt to get traceback.
+23May07
+kes Reduce bat connect timeout from 30 to 15 seconds.
+kes More restructuring and implementing BSOCK class in place of
+ old bnet.c code.
+kes Remove a few unnecessary malloc() tests in crypto code.
+kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
+ not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
+kes Remove duplicate HAVE_CRYPTO definition in config.h.in
+22May07
+kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
+ Make buffer bigger.
+kes Fix Verify InitCatalog. The attributes were not pointing to the
+ correct saved location.
+kes Implement message callback so that GUI is sure to get all
+ daemon messages. Currently displayed in a dialog in bat.
+kes Ignore SIGUSR2 (Bacula timer) in bat.
+kes Apply regress patch from bug #859 to allow regress to work
+ with Solaris compiler.
+21May07
+kes Begin adding TLS support to bat.
+kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
+ clean up lex.c and make it more readable.
+20May07
+kes Move more bnet functions into the BSOCK class.
+kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
+kes Complete change of berrno strerror() method to bstrerror()
-Changes to 1.39.3:
-04Jan06
-kes Start implementing Verify list output.
-kes Move the suitable_drive flag to a better place to prevent
- premature termination of the reservation if all drives
- are busy -kes should fix Arno's diff/inc pool failures.
-26Dec05
-kes Add mutex to single thread VSS code in Win32.
-22Dec05
-kes Simplify code in askdir.c that waits for creating an appendable
- volume so that it can handle multiple returns from the wait
+Release: 2.1.10 beta
+18May07
+kes Cleanup incorrect email addresses in bsmtp.
+kes Make bat display initial messages rather than discard them.
+16May07
+kes First cut of adding .mod to the run command.
+kes Implement auto display of messages in bat.
+kes Enhanced preferences to allow all Bacula output to be
+ displayed in bat.
+15May07
+kes Fixed bug #856 autochanger documentation.
+kes Rework bsmtp date editing for Win32. This fixes bug #854.
+kes Add new cats entry point so Win32 builds.
+14May07
+kes Attempt to fix bsmtp date editing on OSes without %z editing.
+kes Do better checking for the MySQL 64 bit libraries looking for both
+ .a and .so libraries.
+kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
+ /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
+kes Require the thread safe version of MySQL during configure. Thanks
+ to Andre Noll for pointing this out.
+kes Ensure that calls to find_jobids_from_mediaid_list() check count before
+ continuing in migration code.
+kes Apply implementation of tray-monitor font derived from gnome-console
+ submitted by Andreas Piesk <a.piesk@gmx.net>
+13May07
+kes Eliminate important memory loss in SQLite
+kes Fixed the batch insert MySQL thread specific data that was not
+ being freed. See cats/mysql.c:db_thread_cleanup().
+kes Fix restore before command.
+kes Convert old hdr.name to name() in a few places.
+kes Implement update jobid command.
+kes Return all time_t dates in db_get_job_record()
+kes Stop watchdog in SD earlier.
+kes Put Pool just after Storage in please mount message.
+kes Fix pointer usage bugs in Verify InitCatalog pointed out by
+ Eric.
+12May07
+kes Update the po files.
+kes Fix Verify InitCatalog by making it cache attributes.
+11May07
+kes Change name bacula-bat to bat for man 1 page to correspond to
+ Makefile.
+kes Check for client and store NULL pointers in status command. This
+ fixes bug #845.
+kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
+kes Fix sign extended editing of %p.
+kes Clean out a little old #ifdefing in cats/mysql.c
+10May07
+kes If time diff between DIR and FD is more than 600 seconds convert
+ INFO message to WARNING.
+kes Implement heap size display in status for all daemons.
+kes Attempt to fix MySQL db open memory loss (not successfull).
+kes Don't set SIGKILL and SIGSTOP neither can be trapped.
+kes Eliminate memory loss in MySQL (possibly other SQLs) during
+ Query. This looks like a MySQL but but by doing extra releases,
+ the memory goes away. This should fix bug #847.
+09May07
+kes When backup fails, cancel SD before waiting for sd termination.
+kes If SD is waiting for FD to connect during cancel, wake up the
+ thread.
+kes Fix fsf code so that errno is correctly reported.
+kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
+08May07
+kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
+ the original jobb's FileSetId.
+kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
+ spooling in migration jobs. Not yet tested.
+kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
+ reading conf file from a pipe. However, do it with open_bpipe()
+ rather than popen. Not yet tested.
+07May07
+kes Fix an ugly bug where the VolCatBytes were getting updated
+ during a restore.
+kes Implement bconsole memory command that prints current memory
+ usage, plus smartalloc dump.
+kes Clarify some error messages in backup, admin, and migrate.
+kes Shrink label dialog to smaller size.
+kes Invert Cancel OK buttons on restore to be OK Cancel.
+kes More strerror() to bstrerror() conversions.
+06May07
+kes Start implementing bstrerror() in place of strerror().
+kes First cut at stripping path -- seems to work.
+04May07
+kes Prevent door and port files from being restored (mostly
+ Solaris stuff).
+kes Free an unreleased buffer in compat code.
+kes Change console Job name from *Console* to -Console- to eliminate
+ Win32 filename problems. Put Win32 path separator when creating
+ Console file. This fixes bug #846.
+kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
+ implemented.
+kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
+ structure.
+kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
+ to force Win32 error message.
+03May07
+kes First cut strip path. The data should be passed to the FD,
+ but nothing is done with it yet.
+kes Enhance the digest and signature routines in the crypto
+ library to accept a JCR and to use it to print error messages
+ so that they will go in the Job report rather than the daemon's
+ messages.
+kes Simplify some of the verify signature code.
+kes Simplify a few of the alternative returns in the signature
code.
-kes Modify the wait code to permit multiple returns.
-kes Return a zero when 'autochanger drives' is called and
- it is not an autochanger.
-kes Make rewind_dev() a method taking a DCR as an argument.
- This permits closing and reopening the drive if the
- rewind fails as happens if the drive was loaded while the
- file descriptor was open. This refreshes the file descriptor.
-kes Remove the ST_OPENED flag and always rely on fd < 0 for knowing
- if the device is open or not. This should eliminate
- Arnos problem.
-kes Return error if reserve cannot find at least one suitable device.
-kes Make wait_for_sysop() return correct state information.
-kes Fix Win32 state file problem. write was not using compat
- code. This should fix bug #500.
-21Dec05
-kes Modify gui on command to set only GUI mode and not batch.
-kes Modify .messages command to always print messages regardless
- of the mode.
-kes If GUI mode is on, suppress automatic printing of
- You have messages.
-kes Delete old bnet packet code.
-kes Ignore new BNET_START_SELECT and BNET_END_SELECT signals in
- wx-console. -kes not implemented because bconsole must be updated.
-kes Modify restore command in wx-console to set gui on and to use
- only .messages instead of messages. Hopefully this fixes bug
- #514.
-kes Fix seg fault in exit of acquire when canceling a job --
- reported by Wolfgang Denk
-kes Pull in latest reservation system changes from 1.38
-kes Make .messages command always print messages regardless
- of the automessages flag.
-17Dec05
-kes Fix seg fault if user labels a drive directory bug #513
-kes Remove quotes around Version as it breaks things.
-16Dec05
-kes Merge in Aleksandar Milivojevic's mods to the spec file.
-kes Apply sparse code fix for raw drives and fifos. Bug 506
-kes Thorsten fixed Unicode cd problem with wx-console bug 505.
-14Dec05
-kes Correct reservation system to do a last ditch try
- for any mounted volume, then anyone anywhere.
-kes Add quotes around table Version because of
- error in MySQL 4.1.15 -kes bug report submitted.
-kes Correct some minor problems with btape in the fill
- command.
-kes Updates to ssh-tunnel from Joshua Kugler.
-kes Added a report.pl program from Jonas Bjorklund.
-kes Simplify the O_NONBLOCK open() code for tape drives,
- and always open nonblocking.
-kes Do not wait for open() if EIO returned (shouldn't happen).
-kes Eliminate 3 argument to tape open().
-kes Correct the slot # edited in the 3995 Bad autochanger unload
- message.
-kes With -S on bscan (show progress) do not divide by zero.
-13Dec05
-kes Make cancel pthread_cond_signal() pthread_cond_broadcast().
-kes When dcr is freed, also broadcast dev->wait_next_vol signal.
-kes Remove unused code in wait_for_device.
-kes Make wait_for_device() always return after 60 seconds of wait.
+02May07
+ebl Use only POSIX regex instead of GNU regex in breg.c for
+ File relocation. It fix broken freebsd compilation.
+kes Convert all other Dir files to use ne ua class message
+ routines for bat.
+kes Tentative fix for missing digest signature in bug 807.
+kes Correct handle problem in new win32_ftruncate routine.
+kes Convert ua_purge.c and ua_update.c to use new ua class
+ message routines for bat.
+29Apr07
+kes Correct incorrect installation of LICENSE in Win32 installer.
+kes Display LICENSE at the beginning of the Win32 install.
+kes Attempt to correct the need for the png files to be installed
+ for bat.
+kes Reapply my bat.conf install script in qt-console. I think I
+ editted bat.pro instead of bat.pro.in and it was lost.
+kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
+ the /var/lock/subsys for subsysdir. Also corrects typos in the
+ doc.
+28Apr07
+kes First cut update job.
+kes Correct configure to include qmake of src/qt-console directory.
+26Apr07
+kes Make restore job yes/mod/no print in one command so GUI works.
+kes First cut implementing backup and restore client.
+kes Correct editing in Verify output that caused a seg fault.
+25Apr07
+kes Insure that bat.conf is not overwritten during installation.
+kes Fix important bug in db_sql_query() in mysql.c. It was introduced
+ while I was implementing migration in March 2006 !
+24Apr07
+ebl Cleanup file relocation, using char *RegexWhere instead of
+ char *where + bool where_use_regexp
+kes Update some manpages and add bat manpage.
+kes Make a first cut at converting bacula.spec.in for bwx-console
+ and bgnome-console.
+kes Apply patch from John Goerzen to add hostname as fourth argument
+ to make_catalog_backup script.
+kes Fix typos I introduced into bsmtp.c
+kes Make pm_strxxx() routines handle input of NULL pointer. This
+ is to protect from NULL pointers returned from SQL databases.
+kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
+kes Add more debug to FIFO code -- fix fifo regression test.
+23Apr07
+kes Implement posix_fadvise in FD, and for reading spool files in SD.
+kes Add thread timer to bnet_connect() to break from OS if wait time
+ expires.
+22Apr07
+kes Update Win32 build to include new files, new symbols, and
+ renamed files.
+kes Implement socket level heartbeat (tcp_keepidle)
+ebl Commit File relocation patch
+kes Make bat have 'make install' target.
+kes Warn during install if old gnome-console binary found.
+kes Warn during install if old wx-console binary found.
+kes Add -8 option to bsmtp command line to add content type utf-8.
+ Fixes bug #809. (Character coding problem in bsmtp).
+kes If < is found in target (from, to, cc) then do not enclose the
+ target in < > in bsmtp. Fixes bug #772 (malformed address).
+kes When printing certain items in dbcheck, stop after 300000.
+ Fixes bug #822. (dbcheck loops).
+kes Incorrect status in Dir after waiting for mount with poll set.
+ Fixes bug #825.
+21Apr07
+kes Extend idea of Prefer Mounted Volumes to mean a volume about
+ to be mounted.
+kes Print waiting to reserve a device every 5 mins.
+20Apr07
+kes Don't call close_part in label.c if tape and relabel.
+kes Don't free volume if busy in close() -- should help with
+ bug 801.
+ebl Fix #824 RunScript bug (After script could be execute twice)
+ Now, Before Script can use RunsOnSuccess and RunsOnFailure options
+ By default (like before) RunsOnSuccess=true and RunsOnFailure=false
+ Add a regression script to test RunScript
+19Apr07
+kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
+ on Solaris.
+18Apr07
+kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
+ deprecated. No additional bugs will be fixed, and they will be dropped
+ in a future release (probably 2.4.0).
+kes Change name of wx-console to bwx-console to make it more Bacula
+ unique.
+kes Change the name of gnome-console to bgnome-console to make it
+ more Bacula unique.
+14Apr07
+kes Some time in March, a Feature Request with patch from Jorj Bauer
+ <jorj@seas.upenn.edu> was committed by Landon (with my approval).
+ It implements:
+ The ability for the director to validate a Client (FD) CN against
+ an arbitrary set of patterns rather than the hostname, with
+ A new 'TLS Allowed CN' set of directives which are implemented
+ in the Client resource. Then pattern matching is used in place
+ of hostname matching against the Certificate's CN. As an example, we
+ have certificates which (a) use a local CA, and (b) have a CN of the
+ form client_123.
+kes Add new/changed entry points to Win32 build
+kes Create unaccepted-projects for projects that are not accepted.
+kes Simplify locking in the reservations system.
+kes Add more debug code in reservations.
+kes Make sure error condition on reserving a volume is handled correctly.
+kes Correct handling of volume_in_use.
+kes Correct handling of initializing a device.
+kes Move handling of broadcasting releasing a device into release_device().
+kes Correct attaching dcr to dev so that it is only done if device
+ is properly initiated.
+12Apr07
+kes Locking debug level tweaks in SD.
+kes Tweak new Volume code.
+11Apr07
+kes Add exec external-command [wait-seconds] to bconsole. This
+ executes the external-command. Note! normally external-command
+ should be enclosed in double quotes.
+kes Turn the .die command on only if DEVELOPER is defined -- i.e.
+ it should normally be off in a production system.
+10Apr07
+kes Implement die command for SD so that we can force it to dump.
+kes Implement SD lock debug code.
+kes Implement new algorithm for keeping Volume list in SD. It
+ is now owned by the device.
+04Apr07
+kes Implement new code for freeing in use volumes that should
+ resolve if not all, some of the problems of multiple drive
+ tape conflicts described in bug 801.
+03Apr07
+kes Fix gui/bacula-web/images files in svn.
+kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
+02Apr07
+ebl Fix a bug in batch mode (in string escape)
+kes Correct migration prune SQL typo that crept in in a
+ recent 2.1.x change.
+01Apr07
+kes Move bnet_despool() into class in bsock.c
+kes Modify job report to include director name and Build OS.
+kes Move drop root privilege and check_catalog() before fork.
+kes Add update database scripts (version 9 to 10) to updatedb directory.
+31Mar07
+ebl Check size and age of each file after its backup to see if
+ it has changed during backup, if 'checkfilechanges' is set.
+ The FD will do an extra check (stat(2)) after
+ each file backup. mtime, ctime and size are compared with
+ 'before backup' information. If time or size mismatch, an
+ error message will be generated. You must upgrade FD to use it.
+30Mar07
+kes Make database name and user configurable
+ --with-db-name=xxx --with-db-user=xxx
+kes Add back database type to message.c for debugging.
+29Mar07
+kes Implement dir_sql() which issues an SQL query.
+kes Modify bat medialist to use dir_sql() and do some minor C++
+ formatting as well as eliminating a number of pointers, simplifing
+ the code.
+28Mar07
+kes Fix some of the mtx-changer grep commands for tape label readers.
+kes Convert a number of bsendmsg into the appropriate send/warning/error
+ message class calls.
+kes Suppress the using database message in the .sql command.
+kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
+27Mar07
+kes Add context menu for floating a window.
+kes Some minor cleanup and name changes in qt-console
+kes Add doing mt setblk 0 in Win32 mtx-changer.
+kes Apply Martin's bug fix to move definition of ENODATA for
+ FreeBSD to bsock.c
+ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
+ sqlite2 and sqlite3.
+26Mar07
+kes More pruning cleanup.
+kes Turn on wait_for_drive by default in mtx-changer.
+kes Turn on Batch insert code by default as it now passes regression.
+kes Add ./configure --enable-bat to enable building of Bat.
+ No install yet though.
+25Mar07
+kes Implement a new .sql command for bat.
+kes Implement code to turn off pruning in obtaining the next volume.
+ Pruning is turned off for the status dir command, but turned on
+ for SD requests and for the list nextvolume command.
+24Mar07
+kes Correct Qmsg() that was not updated correctly when committing a
+ previous change (probably the recent TLS patch).
+23Mar07
+kes Write new subroutine is_volume_purged() that explicitly checks
+ if the Volume is purged, and if so marks it as such. This should
+ resolve problems reported about needing to mount twice to recycle
+ volumes.
+kes Rewrite pruning algorithm to do more work in the SQL engine, and
+ to pass a list of JobIds to be deleted to SQL. Also, minimize the
+ amount of duplicated code.
+kes Do volume pruning only for the Media Type desired (reduces pruning time
+ if multiple Media Types are in the same pool).
+kes Implement more detailed info in the Job report for the Bacula version
+ and architecture.
+kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
+ ua_purge.c.
+ebl Add bbatch tool to bench database and insert mode.
+ Fix sql quote stuff in batch mode
+ Fix sql stuff for mysql
+22Mar07
+kes Correct problems with am/pm scheduling. Fixes bug #808.
+kes Implement new prunning code that prunes up to 1000 jobs at
+ the same time. The same technique can be applied to a number
+ of other prune/purge subroutines.
+kes Add an insanity check when starting a new tape job to ensure
+ that the tape position has not been changed. If so fail the
+ job.
+kes Fix Win32 build for dlls to add the folllowing:
+ src/lib/bsock.c -- new file with new entry points
+ src/lib/dlist.c -- new entry points
+ src/cats/sql_create.c -- new entry point
+ src/cats/sql_cmds.c -- new DATA item exported
+21Mar07
+ebl batch mode cleanup bscan-test is ok now.
+kes Implement SD code to check length of disk volume before appending.
+18Mar07
+kes Correct return status on db_batch... routines.
+kes Add call to db_write_batch_file_records() to migration code.
+ebl Fix AfterJob timing
+kes Move the checking of the database in initializion of the Director
+ to after we drop privileges. This avoids the need for both root
+ and bacula access to the DB.
+kes Correct a misplaced variable definition in src/filed/backup.c
+kes Correct how the new batch insert db_create_attributes_record()
+ uses the arguments. Caused a seg fault in bscan.
+kes Implement lock() and unlock() methods in DEVICE class.
+ Implement block() and set_block(xx) methods in DEVICE class.
+kes Modify bnet_connect() so that it uses time() to check for the
+ wait time expiring (on some OSes, some system calls may not
+ return immediately).
+kes Modify Verify to obtain the previous JobId when it is actually
+ running rather than at schedule time (as it was in 1.38.x).
+kes Fix src/job.c to handle MaxWaitTime correctly. This should
+ fix bug #802.
+kes When checking pid in pid file, continue running if the pid is
+ the same as ours. This occurs on IRIX after a system crash.
+ Fixes bug #797.
+10Mar07
+kes Extend new GUI API.
+kes Make the ua structure a class, and implement send_msg(),
+ error_msg(), warning_msg(), and info_msg().
+08Mar07
+kes Apply fix from for building wx-console on the Mac from
+ bug #798.
+kes Implement new select mechanism for GUI programs.
+kes Reorganize initialization of stackedWidgets in bat.
+07Mar07
+kes Add updated nagios plugin supplied by Christian Masopust.
+05Mar07
+kes More bat implementation.
+kes File migrate bug with Pool Occupancy using mediaid instead
+ of jobids. Fixes bug #795.
+kes Fix orphaned buffers in filed backup and verify due to
+ crypto buffers not freed during errors. Fixes bug #789.
+kes Extend new GUI api code to tree commands.
+kes Ensure that tree and dot commands check console ACLs.
+kes Permit marking directory with trailing slash.
+kes Allow 20 console connections (instead of only 10).
+04Mar07
+kes Add smartctl call to bacula-sd.conf as an example of getting
+ tape alert info.
+02Mar07
+kes Modify jobq.c to let simultaneous restore jobs run. This may
+ cause them to fail if they cannot get a drive.
+kes Add Client Connect Wait to Storage daemon to permit users to
+ modify the time the SD waits for a FD connection.
+29Feb07
+kes Correct virtual changer check which was backwards. This caused
+ volumes to be unloaded into slots already occupied.
+28Feb07
+kes Apply Command ACL filter to JobId list in restore command.
+kes Correct typeo in var.c patch.
+27Feb07
+kes Don't let Bacula prune File or Job records for the current Job.
+kes Fix variable substitution pad + inc bug reported (with patch)
+ in bug #791.
+26Feb07
+kes Correct SQLite log table index as reported by Luca Berra.
+24Feb07
+ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
+22Feb07
+kes Begin implementing new comm signals for API.
+kes Fix a few places in lib/message.c where the open fd may
+ not be zeroed.
+kes Continue implementing lib/bsock.c (real class). Make jcr,
+ who, host, and port private. There are new methods to access
+ them for non-class use. This required touching a number of files.
+21Feb07
+kes Add LANG=C to autoconf/randpass so it works with languages other
+ than English. Fixes bug #788.
+20Feb07
+ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
+ This fixes bug #780
+ You will not be able to generate Include/Exclude list any more.
+ It will be fixed soon.
+ If you want to use this, you can apply
+ trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
+19Feb07
+kes Restore of sockets created false error messages because Bacula
+ no longer restores sockets, but the code was still trying to
+ set the attributes on a non-existent file. Reported by a user.
+ebl finish RecyclePool feature
+ Media will takes Pool.RecyclePool
+ when moving from Scratch to a Pool or when user will do
+ update volume=xxx frompool
+ To use it, add RecyclePool = aPool to your Pool resource
+ Pool {
+ Name = Default
+ RecyclePool = Scratch
+ ...
+ }
+ TODO: update manual
+kes Expand new BSOCK class adding signal() and new BNET signals.
+kes Begin enhancing the dot commands adding a new API function
+ that returns more information and will make it easier
+ to interface to the Director from a program.
+18Feb07
+kes Make DEVICE fd private. Its new name is m_fd, and can be
+ obtained with dev->fd() outside the class. This is the
+ first of many DEVICE members to be made private.
+kes Implement Michael Renner's idea on having a virtual disk
+ changer. I made some minor modifications (e.g. I did not
+ implement the Virtual Changer directive, but simply set
+ the Changer Command to an empty string.
+17Feb07
+kes Implement a BSOCK send() method that writes the whole record
+ in a single write() request rather than in two.
+ebl add update volume=xxx recyclepool=yyyy
+ volume takes recyclepool from pool when using update volume=xxx from pool
+16Feb07
+kes Fix encryption deblocking bug, which caused some restored files
+ to be truncated. This fixes bug #763.
+kes Add FD event sequence order prepared by Eric -- for RunScripts.
+kes Fix 12am/pm bug as reported in bug #782.
+13Feb07
+kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
+ebl Use btime_t instead of uint64_t in media patch.
+11Feb07
+kes Optimize the use of the database a bit in the Status dir command.
+ Only open it when needed, ensure that if any previous database
+ was opened, it is closed.
+10Feb07
+kes Correct VolCatBytes bug from media patch.
+kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
+ in the case of orphaned records.
+kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
+ and File records in 300K chunks to be more efficient. This
+ idea came from Juan Luis Frances (if I remember right).
+kes Apply Eric's scratch patch that moves a purged Volume to
+ the RecyclePool. Question: how is RecyclePool set? what
+ happens to the ScratchPool?
+kes Apply Eric's media patch that collects read/write media
+ times as well as byte counts. This patch requires a
+ simultaneous upgrade of the DIR and SD. Note, there
+ should be some way to turn off timing. I'm not sure
+ times are in Bacula units.
+kes Apply Eric's batch-insert patch.
+09Feb07
+kes Update projects list.
+08Feb07
+kes Implement Include/Exclude file lists in FD as dlists using
+ the new dlistString class. This permits efficiently having
+ large include/exclude lists and completes project Item 25.
+kes Fix dird/ua_cmds.c so that a cancel command checks if the
+ console is authorized to cancel the job. This fixes bug
+ #767.
+kes Modify SD so that the VolCatJobs medium record is updated
+ at the beginning of a Job rather than the end. This
+ fixes bug #775 where exceeding MaxVolJobs caused jobs
+ to fail.
+kes Added a mutex around getting and setting Volume information
+ so that multiple simultaneous jobs will single thread.
+07Feb07
+ Switch to using Subversion
+kes Remove src/pygtk-console/ from configure
+06Feb07
+kes Delete src/lib/btree.c from win32 build, then add rblist.c
+ plus the entrypoints.
+kes Apply patch supplied that corrects debug print
+ in canceling jobs for max run time. Supplied as
+ part of bug #621, which was previously fixed.
+05Feb07
+kes Test on job_canceled() and sd_msg_thread_done inside
+ loop starting the message thread to avoid a race condition.
+ Fixes bug #771.
+kes Remove rl_catch_signal from console.c as it conflicted
+ with the header definition. Fixes bug #765.
+ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
+04Feb07
+kes Clarify some stored/acquire messages to indicate if the
+ problem is with read or append.
+02Feb07
+kes Fix memory leak with storage ids in cats/sql_get.c
+kes Terminate watchdog earlier to avoid reference to released
+ memory -- reported by Jason Austin.
+kes Move closing the database from jobq.c to the director daemon
+ termination routine. This fixes memory leaks for shadow jobs
+ (i.e. migration jobs).
+kes Free up the unique jobid chain items in migrate.c. This fixes
+ a memory leak problem.
+kes Convert some ugly looking for statements to use foreach_alist
+ in findlib/find.c. This will facilitate converting the structures
+ to use dlist (for large include/exclude lists).
+kes Fix a bug in the btree.c and btree.h routines, then rename them
+ rblist and add them to be built in src/lib. Include some new
+ methods written by Rudolf Cejka that make the code more readable
+ (hides some of the ugly casting).
+kes Add set_next() and set_prev() methods which make the code much more
+ readable. Also add a new dlistString class that facilitates storing
+ strings in dlists. To be used in the large include/exclude lists.
+kes Make some trivial modifications to lib/tree.h that use rblist
+ rather than dlist for storing the tree links. This was suggested
+ by Rudolf Cejka. The result of this is that the restore tree now
+ uses red-black binary trees rather than simple linked lists. This
+ should give rather dramatic speed improvements for directories
+ contining large numbers of directories/files (more than 10000).
+28Jan07
+kes Fix maxruntime bug #621.
+26Jan07
+ebl Implement the include JobID in spool file name project.
+kes Reorder projects file in order determined by Jan 2007 vote.
+kes Implement item #12 on project list -- quick release of FD by
+ the SD.
+kes Fix open of SQLite3 db where user does not have write permission
+ so that DIR does not crash. Fixes bug #761.
+25Jan07
+kes Add back missing @ in Win32 Makefile.
+kes Change 'Device not configured to autolabel' from INFO
+ to WARNING.
+kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
+ which should restart an indefinite # of times.
+kes Fix configure --help to print --with-mysql[=DIR]. Same for
+ other DIR specifications.
+23Jan07
+rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
+ Fix path quoting in SQLite scripts.
+ Fix problems with SHGetFolderPath.
+19Jan07
+kes Create patches/2.0.1-restart.patch. Fixes bug #755.
+18Jan07
+kes Fix Job restart on error bug that promotes an Inc to a Full
+ backup. This should fix bug #755.
+kes Add qt-console and first cut of code.
+
+Version 2.0.1
+12Jan07
+kes Fix Bacula->Documentation link on Win32 to point to index.html
+ instead of bacula.html. Fixed bug #750.
+kes Return JobId in db_get_job_record() when JobId==0. This should
+ fix bug #741.
+kes Do not release source pointers when restarting a failed job.
+11Jan07
+kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
+ This *should* fix bug #747.
+kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
+ bug #742.
+09Jan07
+kes Modify USTORE constructor to set an empty store_source string,
+ and don't copy the store_source string in a cancel. Hopefully
+ this will fix Arno's seg fault, bug #744.
+kes Add back code to disable conio in configure. Fixes bug #743.
+kes Correct the Options scanner in the FD to correctly handle
+ SHA1 option, which was eating the next option. Reported by
+ Sebastien Guilbaud.
+kes Add code to indicate when the SD is spooling, spool wait, and
+ despooling as requested by Alan Brown.
-Changes to 1.39.2:
-13Dec05
-kes Add stubs for non-crypto build.
-12Dec05
-kes Use localhost if no network configured
-11Dec05
-kes Eliminated duplicate MaxVolBytes in cat update -kes bug 509.
-kes Remove debug print.
-kes Add bail_out in error during state file reading.
-10Dec05
-kes Merge changes made to 1.38.3 into HEAD
-kes Add stubs for pygtk-console code
-kes Create Makefile.in for pygtk-console code
-09Dec05
-kes Merge updates into 1.38 branch
-kes Update specs to include mysql4 define.
-kes Fix when attributes are sent, must be after binit().
-kes Stop read_record() if status not ok in second loop.
-kes Return rec->FileIndex in dcr->VolLastIndex for normal
- and partial records in read_record(). This allows bscan
- to get FileIndex at EOT correct.
-kes Fix butil.c to correctly set dcr -kes fixes seg fault in bls.
-08Dec05
-kes Fix Win32 built to work with new crypto code.
-kes Apply patch supplied by user (slightly modified) to fix
- correct detection of holes in block devices and FIFOs.
- Bug # 506.
-kes Apply patch supplied by user (slightly modified)
- to fix SD hang with multiple pools and bad client
- IP. Fixes bug # 508.
-07Dec05
-kes Add nagios plugin to the examples directory. Submitted by
- Christian Masopust.
-kes Remove warning message about multiple saves of hardlinked files
- from find_one.c as it can generate too many warning messages.
-kes Modify most restore error messages to be queued so that they
- appear at the end of the job rather than mixted with the restore
- listing where they could be 'lost'.
-06Dec05
-kes Reset timeout values before select() per patch from
- Frank Sweetser for problems with non-blocking sockets.
-kes Unlink the state file if either reading or writing it gets
- errors. Hopefully this will fix Win32 exit problems.
-kes Add sanity check in append.c to ensure that dcr is not NULL.
- This can happen if multiple drive autochanger SCSI control
- channel and drive indicies do not correspond.
-05Dec05
-kes Get next volume from Scratch pool before creating a volume.
-kes Set new Pool defaults in Vol when moved from Scratch Pool.
-kes Remove argument from create_bacula_database for SQLite as it
- caused an error.
-kes Add back index code so that two drive autochangers can get
- a second tape.
-kes Change a bunch of debug levels to aid debugging autochangers.
-kes Fix reservation so that mutexes are properly applied.
-kes Rework reservation algorithm so that two drives can be used
- at the same time.
-04Dec05
-kes Landon merged his data encription changes into the HEAD
-kes Apply days keyword patch from Alexander.Bergolth at wu-wien.ac.at
- If this patch is applied, the number of days can be specified with
- 'list nextvol days=xx'
- or
- 'status dir days=xx'
- My use case is to be able to preview the next scheduled job (and the
- next tape to be used) on fridays if there are no scheduled jobs during
- the weekend.
-Changes to 1.39.1:
-03Dec05
-kes Fix font code in gnome2 console user patch. Fixes bug #501.
-kes Fix malformatted bnet error message that caused seg fault
- fixes bug 502
-kes Applied user patch to improve README.vc8 in src/win32.
-29Nov05
-kes Add Migrate, Copy, Archive Job types (some where there)
-kes Correct some more editing of JobId's (for 64 bit compatibility).
-kes Ensure that StorageId is stored in Media record when ever possible.
-kes Add Migration Job to Job.
-kes Add Migration Time, Migration High Bytes, Migration Low Bytes
- Next Pool to Pool resource.
-kes Add more code to mac.c (migration archive copy).
-kes Change Start Storage daemon job to require read and write storage
- pointers.
-kes Pass read storage data to SD as well as write storage data.
-kes Remove old code from winservice.cpp
-kes Break on error in scan.
-kes Fix typo in signal.c
-kes Separate read/write DCR in SD. Add jcr->read_dcr.
-kes Cleanup how find_device() works.
-kes Add read output to Status in SD.
-Changes to 1.39.0:
-23Nov05
-kes Add red-black btree routines
-21Nov05
-kes Remove abs() in bfile.c so that it compiles on Solaris.
- Bug #491.
-20Nov05
-kes Fix crash in tray-monitor when daemon disconnects. Bug #479.
-kes Fix bnet-server bug found on OpenBSD. Bug #486
-kes Fix cancel failure bug. Bug #481
-kes Fix failure when Pool name has spaces. Bug #487
-kes Fix SD crash in autochanger code. Mutex failure. Bug #488
-kes Fix a couple of free()s in src/filed/acl.c
-kes Fix memory overrun in bfile.c in building OS X resource
- fork filename. Bug #489
-kes Add Pool name to SD status output.
-14Nov05
-kes Apply SunOS patch for ACLs submitted by David Duchscher.
-kes Make sure to set storage before trying to set drive.
-kes Add bacula_mail_summary.sh to examples directory. It makes
- a single email summary of any number of jobs. Submitted
- by Adrew J. Millar.
-kes Make sure when we do a mount to unblock the device even
- if the drive could not be opened.
-13Nov05
-kes Remove the USE_WIN32STREAMEXTRACTION #defines (always on)
- and correct a few minor problems to make it build on Linux.
-10Nov05
-kes Remove delete of CVS from all Makefiles
-kes Fix seg fault when clicking on Add button in wx-console
- restore panel. Bug #470.
-kes Fix copyright date and URL typo -kes bug #468.
-kes Change autostart install for FreeBSD to look for rc.conf
- rather than rc.local as suggested fix for bug #466.
-kes Apply patch supplied by Eric Bollengier to fix PostgreSQL
- grant on status. Bug #465
-kes Apply patch supplied by Eric Bollengier to fix PostgreSQL
- update script. Bug #464
-kes Tweak #ifdefing a bit in new Win32 stream code.
-kes Fix #ifdeffing for FD_NO_SEND_TEST.
-kes Add documentation of performance #defines
+Version 2.0.0 released: 4 January 2007