- Release Notes for Bacula 2.1.28
+ Release Notes for Bacula 2.5.16
- Bacula code: Total files = 516 Total lines = 244,888 (*.h *.c *.in)
+ Bacula code: Total files = 517 Total lines = 199,415 (*.h *.c *.in)
This Director and Storage daemon must be upgraded at the same time,
-but they should be compatible with all 2.0.x File daemons, unless you
+but they should be compatible with all 2.4.x File daemons, unless you
use some of the new features that affect the FD. In other words, you should
-not have to upgrade all your File daemons. However, bat works only with
-a 2.1.8 Director or greater.
-
-!!!!!!!!!!!!!!!!!!!!!!! Please Note !!!!!!!!!!!!!!!!!!!!!!!!!!!
-Restore on Win32, and in particular on Vista is untested. Please
-test before relying on it. It should backup and restore reparse
-points.
-!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
-
-Changes since Beta release 2.1.26
-- Several bug fixes #842, 893, and some unreported bugs.
-- Storage overrides delete all previous storage definitions instead
- of prepending.
-- One should be able to mount and unmount removable devices if the
- Device resource has Removeable Media set and the mount and unmount
- directives are defined.
-- ./configure will do a better job of searching for qwt libraries.
-- The Win32 version can no longer be shutdown from the tray monitor.
- Use the command line or the Services panne.
-- Make Mac OS X compile work.
-
-Changes since Beta release 2.1.24
-- Add qwt graphics library (for Qt4) needed to build bat to the
- depkgs-11Jul07.tar.gz package
-- You now need a --with-qwt=<dir> to be able to build bat.
-- Keep prune_volumes() from pruning the whole Scratch pool.
-- More debug output in status storage.
-- Correct moving a Scratch volume from pool to pool (some
- critical columns were lost).
-- New more efficient db_get_query_dbids() -- not yet implemented
- everywhere, but currently used in volume pruning.
-
-Changes since Beta release 2.1.22
-- Different locking in reservations and despooling systems,
- which means more micro-locking and less macro-locking, which
- should give a lot more concurrency at the expense of slightly
- (<0.1%) more overhead due to more locking/unlocking, but
- concurrent jobs should run much faster.
-- Patch from Sergey Svishchev <svs@ropnet.ru> that fixes bug in
- migration code where a job that spanned two volumes was
- migrated twice.
-
-Changes since Beta release 2.1.20
-- New graphs in bat
-- Due to a typo, I had inadvertantly turned off batch insert mode.
- It is now re-enabled
-- Possible fix for bug #888 (dropped comm lines using TLS).
-- Test version of Win32 binaries for Vista.
-
-Changes since Beta release 2.1.18
-- Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
- loaded tape but uses first drive).
-- Fixed bug #807 Restore encrypted backup failed on Windows 2003
- This was indeed a Win32 issue.
-
-Changes since Beta release 2.1.12
-- Version 2.1.14 not released.
-- Possible solution to Win32 encryption restore signature errors.
-- Reload with syntax errors in @include now works.
-- Gnome console builds with encryption.
-- Fixed bugs #864, 872, 874, 882, 882, 877, 886, 885.
-- License is now GPL v2 without modifications, fix a few copyright
- mistakes made when adding FSFE copyright notice.
-- Fix update all from pool to pass pool name.
-- Correct reservation system bug that invalidated Volumes by
- calling find_next_appendable volume before acquiring a device.
-
-Changes since Beta release 2.1.10
-- Lots of new bat functionality !!!!!!
-- Additional drive reservation algorithm that should solve a lot of
- the problems experienced with multiple drive autochangers.
-- Reload was broken in 2.1.10 -- now fixed.
-- Storage daemon status command enhanced to more clearly show Volume,
- pool and media type when a job is waiting.
-- Made bsmtp work with more strict SMTP servers.
-- Detect doubly freed buffers in smartall.c
-- Reduce the impact of a backup on the FD's memory usage (OS file
- caching). This works only on POSIX compliant systems. This allows
- users to work with less interference on a Client machine during a
- backup.
-- bat should now handle non-English characters.
-- ./configure now permits --enable-batch-insert (as well as --disable...).
- This feature is enabled by default if your SQL libraries are thread
- safe.
-- The default setting for SQLite3 is now 'PRAGMA synchronous=OFF'.
- This makes it run 30 times faster, but increases the possiblity
- of a corrupted database if your server shuts down unexpectedly.
- The default behavior can be changed in src/version.h
-
-Areas requiring caution or testing:
-- You must have Qt4 Version 4.2 or greater loaded to build bat
-- You must have the thread safe version of MySQL client libraries loaded
- to build with MySQL enabled.
-- The Volume management in the Storage daemon is extensively rewritten.
- It appears to function much better, but is largely untested under
- severe production stress conditions (multiple drive autochangers, ...).
-- Volumes are pruned only when absolutely necessary -- this may cause
- your database to grow compared to prior Bacula version.
-- Socket level heartbeat is untested.
-- Solaris door and even port files are no longer restored (equivalent
- to what we do with sockets).
-- Win32 servers are untested, and very likely not to work.
-- SQLite is no longer supported for Solaris -- it fails too often with
- bus errors.
-
-The major new features are:
-- Much faster insertion of attributes (somewhere around 10 times),
- many thanks to Eric Bollengier and Marc Cousin.
-- First cut of bat (Bacula Administration Tool). Note to build
- bat you must explicitly enable it on the ./configure line, you
- must have the Qt4 version 4.2 or later libraries loaded, and
- qmake and the other Qt4 tools must be available. bat is ALPHA
- software. A large part of the work was done by Dirk Bartley.
-- Red/Black restore in memory tree (500 times faster loading).
-- The Regex Where code to allow easier relocation of restored files
- thanks to Eric.
-- Socket level heartbeat for all connections (untested).
-- posix_fadvise() use in the FD to improve performance.
-- Simpler locking in the SD in the reservation system.
-- Much improved Volume reservation code that should eliminate most
- conflicts experienced in multiple drive autochangers.
-- Detection of file size/date change during backup if enabled.
-- New Recycle Pool feature -- thanks to Eric.
-- Efficient implementation of very large include/exclude lists.
-- Volumes are no longer pruned during 'status dir'
-- Pruning is now more efficient, and if a Volume is purged,
- during pruning, it is immediately discovered.
-
-Other features or bug fixes:
-- Fixed bugs: 856, 854, 845, 847, 846, 809, 772,
- 822, 825, 824, 808, 802, 797, 798, 795, 789, 791,
- 788, 780, 763, 782, 612, 767, 775, 621, 772, 764,
- 766, 621, 761, 755, 750, 741, 747, 742, 744, and 743.
-- Only the minumum number of volumes are pruned rather than
- all volumes in the pool.
-- wx-console renamed to bwx-console
-- gnome-console renamed to bgnome-console
-- Migration preserves original job's FileSetId
-- Spooling implemented for migration jobs.
-- Config files can be read through a pipe, by specifying a leading |
- in front of the configuration path/filename.
-- New memory command (bconsole) that will print the current Director's
- memory usage, and a in use buffer dump.
-- Solaris door and event port files are no longer restored.
-- Console name changed from *Console* to -Console- to accomodate Win32
- filename restrictions.
-- Corrected Win32 ftruncate bug.
-- Additional version information added to Job reports.
-- New -8 option for bsmtp to specify UTF-8 encoding type.
-- bsmtp will no longer add < > to target (from, to, cc) if there
- is already a < in the target.
-- Perfer Mounted Volumes extended to mean a volume that is being
- mounted by another job.
-- Runscript timing set to same as version 1.38.11
-- New TLS Allowed CN directive(s) permitted.
-- New bconsole 'exec' command to run external script/command.
-- Turn on FreeBSD/OpenBSD code to set EOT model on tape.
-- Drop from root done before database is opened.
-- database user and name can be configured with:
- --with-db-name=name --with-db-user=user
-- turn on wait_for_drive in mtx-changer script.
-- rework how bar codes are handled in mtx-changer script.
- This appears to have been an unreported bug.
-- Updated nagios plugin supplied by Christian Masopust
-- Better restricted console ACL checking.
-- New Client Connect Wait directive in Storage daemon so that
- users can configure how long SD waits for FD connection.
-- Bacula will no longer permit pruning of the currently running
- job (note, if other jobs are running, they may be pruned).
-- Sockets are no longer restored.
-- dbcheck works in 300K chunks so will typically run faster.
-- Include/Exclude lists can now be efficiently handled for quite
- large sizes -- tens of thousands of entries.
-- Several memory leaks in migration and database usage were fixed.
-- New console keyword restoreclient, which specifies the client to
- which the restore will be sent. The client keyword specifies
- the backup client. The restoreclient keyword is optional if it is
- not specified, the backup client will also be the restore client.
-- The disk file size is now checked to ensure that it agrees with the
- catalog value before Bacula will append to the disk (same as tape
- and DVD).
+not have to upgrade all your File daemons when you upgrade. There is
+no database upgrade needed from version 2.4.x. However, the next
+BETA release will require a database upgrade.
+
+================== Warning !!!!!! ==========================
+This BETA release of Bacula 2.5.x development code uses libtool
+to generate the Bacula libraries as shared objects rather than
+being directly linked in as in prior versions. This means that
+the Bacula shared objects, must either be in a shared object
+directory known to the loader or they must be in the directory
+that may be specified on the ./configure line using the
+--libdir option as:
+
+ ./configure --libdir=/full-path/dir
+
+the default /lib. If --libdir is specified, there should be
+no need to modify your loader configuration provided that
+the shared objects are installed in that directory (Bacula
+does this with the make install command). The shared objects
+that Bacula references are:
+
+libbaccfg.so
+libbacfind.so
+libbacpy.so
+libbac.so
+
+If you have problems with libtool or you wish to use the old
+way of building static libraries, you can do so by disabling
+libtool on the configure command line with:
+
+ ./configure --disable-libtool
+==============================================================
+
+This release includes large number of new features and changes.
+It should be more or less compatible with previous xx.conf files
+and File daemons providing that you are not using any of the new
+features.
+
+Please see the New Features chapter of the new manual, which documents
+some but not all the new features (we are still working on it):
+
+http://www.bacula.org/manuals/en/concepts/concepts/New_Features.html
+
+The ChangeLog has more details.
projects / bacula / bacula / blobdiff