- Release Notes for Bacula 5.2.0
+ Release Notes for Bacula 5.2.1
- Bacula code: Total files = 1,088 Total lines = 219,172 (Using SLOCCount)
+ Bacula code: Total files = 1,110 Total lines = 231,439 (Using SLOCCount)
General:
--------
-This 5.2.0 version is a major release since the last version 5.0.3.
-It includes well over 50,000 lines of changes and a number of important
-new features:
+This 5.2.1 version is a major release since the last version 5.0.3.
+It includes well over 299,387 lines of changes made by 20 contributors,
+lots of bug fixes (see below), 1,851 software commits,and a
+number of important new features:
+
+Version 5.2.0
+-------------
+Version 5.2.0 was short lived, because Marco (thanks) found
+a number of last minute bugs. So the first official release of 5.2
+is 5.2.1.
Compatibility:
--------------
As always, both the Director and Storage daemon must be upgraded at
the same time.
- Older 5.0.x and 3.0.x File Daemons are compatible with the 5.2.0
+ Older 5.0.x and 3.0.x File Daemons are compatible with the 5.2.1
Director and Storage daemons. There should be no need to upgrade older File
Daemons.
-Changes and New Features:
+Main New Features:
+------------------
+- LZO Compression
+- New Tray Monitor
+- Purge Migration Job
+- Changes in Bvfs (Bacula Virtual FileSystem)
+- Changes in the Pruning Algorithm
+- Ability to Verify any specified Job
+- Additions to RunScript variables
+- Additions to the Plugin API
+- ACL enhancements
+- XATTR enhancements
+- Class Based Database Backend Drivers
+- Hash List Enhancements
+
+Some of the above are described below; all the above are
+described in more detail in the New Features chapter of the
+manual.
+
+Closed Bugs since 5.0.3:
+---------------------
+1389 1444 1448 1466 1467 1468 1476 1481 1486 1488 1493 1494 1497 1499 1501
+1502 1504 1509 1511 1513 1516 1524 1526 1527 1532 1536 1538 1541 1542 1549
+1551 1553 1554 1558 1559 1560 1564 1567 1568 1569 1571 1574 1577 1581 1582
+1584 1587 1594 1595 1600 1601 1602 1603 1604 1606 1608 1610 1612 1623 1624
+1633 1643 1648 1655 1661 1664 1666 1669 1672 1675 1684 1685 1695 1696 1699
+1700 1703 1735 1741 1749 1751 1761 1762 1764 1768 1770 1771 2710
+
+
+================== Warning !!!!!! ==========================
+
+ The new pruning algorithm will not allow pruning of jobs that are essential to
+ restore since the last Full backup. This is, of course, correct and desirable,
+ but it is different from older Bacula versions that could inappropriately
+ prune jobs. Pruning of volumes is not affected.
+
+Building Bat:
+-------------
+To build Bat, you need Qt4 version 4.6.2. If you build with any other
+version it is likely not to work. If you do not have version 4.6.2, on
+your system, you can download the Bacula depkgs_qt version 16Dec10.
+
+Packaging the SQL backend:
+--------------------------
+The main Bacula Director code is independent of the SQL backend
+in this version. This means that the Bacula Director can be packaged
+by itself, then each of the different SQL backends supported can
+be packaged separately. It is possible to build all the DB backends
+at the same time.
+
+- configure can be run with multiple database configure options.
+ --with-sqlite3
+ --with-mysql
+ --with-postgresql
+
+Order of testing for database is
+- postgresql
+- mysql
+- sqlite3
+
+Each configured backend generates a libbaccats-<backend_name>-<version>.so
+A dummy catalog library is created named libbaccats-version.so
+
+At configure time the first detected backend is used as the so called default
+backend and at install time the dummy libbaccats-<version>.so is replaced with
+the default backend type.
+
+If you configure all 3 backends you get 3 backend libraries and the postgresql
+gets installed as the default. When you want to switch the default you can
+copy one of the 3 backend libraries over the libbaccats-<version>.so e.g.
+
+cp libbaccats-postgresql-<version>.so libbaccats-<version>.so
+
+And update the default backend in the following files:
+
+create_bacula_database
+drop_bacula_database
+drop_bacula_tables
+grant_bacula_privileges
+make_bacula_tables
+make_catalog_backup
+update_bacula_tables
+
+New Catalog format in version 5.2.0 and greater
+-----------------------------------------------
+This release of Bacula uses a new catalog format. We provide a set of
+scripts that permit to convert a 5.0.x (version 12) catalog to 5.2.1 (version
+14). The Bacula project rpm spec files have been modified to
+detect the database change and do the upgrade for you. We strongly
+recommend that you save a copy of your existing database before upgrading
+using rpms.
+
+The simplest way to upgrade the database assuming you are building from
+source (i.e. manually):
+1. Stop any current version of Bacula from running.
+2. Save a copy of your existing database.
+3. Configure, build, and install the 5.2.1 version of Bacula
+ Note the new ./configure options in the manuals see the link
+ at the bottom of this file.
+4. cd <your-scripts-installation-directory>
+5. ./update_bacula_tables
+6. If you have multiple catalogs, edit the update_bacula_tables
+ script and put the name of another database, and then
+ execute the script again. Repeat this until all Bacula
+ catalogs have been updated.
+7. Start the new Bacula. If everything worked, it should
+ not print any error messages.
+
+If you start from scratch, you don't need to run the update_bacula_tables
+script because the create_bacula_tables script automatically creates the new
+table format. However, if you are using a version of Bacula older than 5.0.0
+(e.g. 3.0.3) then you need to run the update_bacula_tables script that will
+be found in the <bacula>/src/cats directory after you run the ./configure
+command. As mentioned above, before running this script, please backup your
+catalog database, and when you do running it, be sure shutdown Bacula and be
+aware that running the script can take some time depending on your database
+size.
+
+================================================================
+
+Changes:
+
+Speed and Memory Usage Enhancements:
+- Implement LZO compression algorithm (need lzo2 headers to activate this option)
+- New Pruning algoritm -- safer and faster
- Use of PostgreSQL cursor when doing large queries, should reduce the
memory usage during restore and accurate backups.
-- Includes better handling for Windows repares points, mount points, and
- junction points.
-- A few path name length limits in Windows have been removed.
-- New SQL backend and ./configure that permits building multiple catalog
- backends in one build, and has the main Bacula core code totally independent
- of the SQL backend, which should simplify packaging (only the libbacsql.so/dll
- needs to be changed.
-- New database format
-- Director selection option in bconsole
-- restorejob command in bconsole
-- Checkpoint of jobs so that in many cases they can be restarted
-- Maximum Bandwidth Per Job in several places
-- Disable batch insert config item
-- setbandwith command
-- limit command
+- limit command in some list commands
- Bacula Virtual File System for fast catalog access
-- New Pruning algoritm -- safer and faster
+- Faster crc32 algorithm
+
+Security Enhancements:
- Additional security against injection of illegal characters
-- New block delta backup/restore
-- Indent lsmark during restore
-- Additional script variable editing
+- Fix possible fnmatch problem
+
+Features Enhancements:
- Improvements in ACL and xattr handling on additional platforms:
AIX, Darwind, FreeBSD, HPUX, IRIX, Solaris, Tru64
+- Tray monitor for Windows
+- New SQL backend and ./configure that permits building multiple catalog
+ backends in one build, and has the main Bacula core code totally independent
+ of the SQL backend, which should simplify packaging (only the
+ libbacsql.so/dll needs to be changed to switch from one database backend
+ to another (e.g. MySQL to PostgreSQL).
+- Indent lsmark during restore
+- Disable batch insert config item
+- Director selection option in bconsole
+- restorejob command in bconsole
+- Many additional features for bat such as "brestore" panel
+- The old bat version browser has been turned off since it does not
+ work correctly and the brestore panel provides the same functionality
+- Improved hash table for hard links
+- Additional script variable editing such as %b (JobBytes), %F (JobFiles)
+ and %h (Client Address)
+
+Other Enhancements:
+- Includes better handling for Windows repares points, mount points, and
+ junction points.
+- New database format
- Many new plugin API features
-- Faster crc32 algorithm
- Improved memory handling for restores
-- Improved hash table for hard links
- Significant stability enhancements to bat
-- Many additional features for bat
-- Tray monitor for Windows
-- New FTP device handler for Storage daemon
-
-Bug fixes
+- xattr/ACL restore failure are now printed as Warning
+- A few path name length limits in Windows have been removed.
===========================================================================
-This 5.0.3 version is significant bug fix update to version 5.0.2.
+The 5.0.3 version is significant bug fix update to version 5.0.2.
It includes new code and some new features.
There is no database change since prior versions of 5.0.
projects / bacula / bacula / blobdiff