- Release Notes for Bacula 2.5.16
-
- Bacula code: Total files = 517 Total lines = 199,415 (*.h *.c *.in)
-
-This Director and Storage daemon must be upgraded at the same time,
-but they should be compatible with all 2.4.x File daemons, unless you
-use some of the new features that affect the FD. In other words, you should
-not have to upgrade all your File daemons when you upgrade. There is
-no database upgrade needed from version 2.4.x. However, the next
-BETA release will require a database upgrade.
-
-================== Warning !!!!!! ==========================
-This BETA release of Bacula 2.5.x development code uses libtool
-to generate the Bacula libraries as shared objects rather than
-being directly linked in as in prior versions. This means that
-the Bacula shared objects, must either be in a shared object
-directory known to the loader or they must be in the directory
-that may be specified on the ./configure line using the
---libdir option as:
-
- ./configure --libdir=/full-path/dir
-
-the default /lib. If --libdir is specified, there should be
-no need to modify your loader configuration provided that
-the shared objects are installed in that directory (Bacula
-does this with the make install command). The shared objects
-that Bacula references are:
-
-libbaccfg.so
-libbacfind.so
-libbacpy.so
-libbac.so
-
-If you have problems with libtool or you wish to use the old
-way of building static libraries, you can do so by disabling
-libtool on the configure command line with:
-
- ./configure --disable-libtool
-==============================================================
+ Release Notes for Bacula 5.0.2
+
+ Bacula code: Total files = 1,088 Total lines = 219,172 (Using SLOCCount)
+
+General:
+--------
+
+This 5.0.2 version is primarily a bug fix update to version 5.0.1.
+
+Note, if you are running 5.0.0, read the 5.0.1 release notes below.
+ Important!!!
+
+Compatibility:
+--------------
+ As always, both the Director and Storage daemon must be upgraded at
+ the same time.
+
+ Older 5.0.x and 3.0.x File Daemons are compatible with the 5.0.2
+ Director and Storage daemons. There should be no need to upgrade older File
+ Daemons.
+
+Changes since 5.0.1
+-------------------
+
+Bug fixes
+1502 1511 1517 1524 1527 1532 1536 1541 1549 1551 1553 1559 1560
+
+- Probable fix for SD crash bug #1553
+- Fix #1559 problem when restoring pruned jobs with a regexp
+- Fix for bug #1560 bcopy cannot find Volume
+- Fix cancel crash bug #1551
+- Check if sql backend is thread-safe
+- Correct Pool display in SD status. Fixes bug #1541
+- Fix cancel crash reported by Stephen Thompson
+- Rewind on close to fix #1549
+- Remove closelog() in bpipe fixes bug #1536
+- Fix #1517 about missing Base level in .level command
+- Replace ASSERT in block.c with fail Job
+- Fix database locking calling db_lock and returning from function without
+ calling db_unlock.
+- Add missing db_unlock to bvfs_update_cache.
+- Fix #1532 about permission on binaries
+- Fix #1527 about deadlock during migration
+- Another fix for OpenSSLv1
+- Add -lrt to Solaris links
+- Fix tls.c for OpenSSLv1
+- Fix #1511 when trying to insert more than 50.000 directories in bvfs
+- Fix plugin load not to stop if one plugin bad -- pointed out by James
+- Remove --without-qwt from configure statement.
+- Second correct fix to bug #1524 verify fails after adding or removing files
+- Fix bug #1524 verify fails after adding or removing files
+- Apply fix suggested by Andreas in bug #1502 for mediaview column sort problem
+- Fix OpenSSL 1.x problem in crypto.c on Fedora 12
+- Display AllowCompress warning message only if compression used in FileSet
+
+
+!!!!!!!!!!!!!!! NOTE FOR 5.0.0 USERS !!!!!!!!!!!!!!!!!!!!
+The Allow Duplicate Jobs directive has been significantly
+reworked, and the default value has changed. See below.
+
+Truncate On Purge has been totally rewritten. See the new
+features section of the manual.
+
+When Volume Poll Interval is set in the SD DEVICE configuration,
+(default 5 mins), after a certain number of polling tries (approx
+10) polling will stop and the operator will be asked to
+resolve the problem. Previously there was no limit, and an
+error message could be produced at each poll attempt.
+!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
+
+Changes since 5.0.0
+-------------------
+- We believe that we have resolved most of the problems
+ concerning canceled or failed jobs being "stuck" in the
+ Director. There is one outstanding problem in the SD when
+ canceling jobs that we will fix in the next major release.
+ If you see jobs that seem to be stuck, in general issuing
+ a cancel command in bconsole should now make them go away.
+
+Directives:
+- The default for "Allow Duplicate Jobs" has been changed from
+ no to yes. If you use this directive, please check your
+ conf file, and note the next two items !!!!!!!!!!!!!!!!!!!
+- AllowHigherDuplicates disabled. It did not work as documented
+ and was confusing.
+- New directive "CancelLowerLevelDuplicates" See New Features
+ section in the manual.
+- Truncate on Purge rewritten. See New Features section in the manual.
+
+Bug fixes:
+1448 1466 1467 1468 1476 1481 1486 1488 1494 1497
+1499 1501 1505 1509 1513
+
+- Ensure SD asks for help when looping even if poll set. Fixes bug #1513.
+- Fix three-pool regress bug
+- Modify bacula.spec fixes bug #1505
+- This version fixes an issue where the console window would start out
+ docked. It is fixed by initiating the variables in the Pages class wi
+ constructor.
+- Fix make_catalog_backup.pl fails when catalog db is on other host
+- Apply MacOSX installer patch from bug #1509
+- Apply fix to previous fix of Copy problem. Fix proposed by reporter o
+ #1476
+- Fix bug #1501 -t does not print errors
+- Apply SQLite3 update fix from bug #1497
+- Apply bashism fix for diskchanger.in script from bug #1499
+- Apply rpm fix for Sci Linux from bug #1494
+- Take most recent Ukranian po from bug #1448
+- Probable fix for Copy/Migration bug #1476
+- Fix bug #1488 -- avoid recursion and race conditions in messages.c
+- Upgrade cats library also to 5.0.0
+- Fix missing console page in bat
+- Add bat help files to Window install
+- Improve Windows upgrade to ensure old FD is shutdown
+- Fix bug #1481 -- bat consumes all console file descriptors
+- Backport truncate on purge from 5.1.x
+- Fix bug #1486 -- bat doesn't show any errors on command-line
+- Update the bsock error URL
+- Correct .my.cnf umask in make_catalog_backup.pl
+- Apply fix for dbcheck use by make_catalog_backup.pl
+- Fix seg fault in bscan from new comment field
+- Allow multiple CNs when using TLS
+- Fix seg fault in SQlite driver
+- Make shared libs version the same as the Bacula release version
+- Remove file_index sequential check
+- Fix #1466 about Bogus pruning message
+
+For Packagers:
+1. The default query.sql file is now, except for some comments, empty.
+The old file, which we no longer support (it is impossible or difficult to
+make it work on every backend, and the queries are mostly contributed) can
+be found in <bacula-source>/examples/sample-query.sql. The sample file is
+not installed by the Makefiles
+
+2. When you install the mtx-changer script, you must also install
+mtx-changer.conf if it does not exist. This new file (mtx-changer.conf) is
+required for mtx-changer to work, but it is a user configurable file, so on
+any update, any existing file should not be overwritten.
+
+3. Bat should be built on every platform that is capabable of running Qt.
+However, the Qt code is changing rather quickly and is not always
+compatible from version to version. We have built and verified bat on Qt
+4.3.4. We strongly recommend that you do not build and distribute bat with
+any other version of Qt unless you personally test it. To build against Qt
+4.3.4, download the depkgs-qt package from the Bacula Source Forge download
+location, read the README file and follow the instructions.
+
+If you are building for Bacula version 5.0.0, please ensure that you do not
+have qmake-qt4 loaded on your system. If you do, either remove it or
+rename it before trying to build bat. If you do not, bat will probably be
+built using the shared objects on your system. For Bacula 5.0.1 and later,
+this problem (bug) does not exist.
+
+depkgs-qt does not install Qt on your system, nor does it interfere with
+you having any other version of Qt installed on your system. Once you
+build bat with depkgs-qt, it should *not* use the Qt shared objects, but
+rather they will be linked into the program. After fully installing bat
+(make install), you can run "ldd bat" to see what shared objects it will
+use. If any Qt shared objects are referenced, something has gone wrong.
+
+4. Unless absolutely necessary, we recommend that you do not define any
+special library environment variables that apply to the ./configure -- for
+example: LIBDIR=/... ./configure <your-options> is strongly discouraged.
+Doing so, could potentially cause Bacula to be linked against the wrong
+shared objects.
+
+5. The Bacula project strongly recommends that you install Bacula into a
+single directory, with a few minor exceptions such as the MySQL or
+PostgreSQL databases. Preferrably this should be /opt/bacula. The full
+recommendation is:
+
+#!/bin/sh
+# Recommended configure script for Bacula
+prefix=/opt/bacula
+email=xxx@yyy.zz
+CFLAGS="-g -O2 -Wall" \
+ ./configure \
+ --sbindir=${prefix}/bin \
+ --sysconfdir=${prefix}/etc \
+ --docdir=${prefix}/html \
+ --htmldir=${prefix}/html \
+ --with-working-dir=${prefix}/working \
+ --with-pid-dir=${prefix}/working \
+ --with-subsys-dir=${prefix}/working \
+ --with-scriptdir=${prefix}/scripts \
+ --with-plugindir=${prefix}/plugins \
+ --libdir=${prefix}/lib \
+ --enable-smartalloc \
+ --enable-tray-monitor \
+ --enable-bat \
+ --with-mysql \
+ --with-dump-email=${email} \
+ --with-job-email=${email} \
+ --with-smtp-host=localhost \
+ --with-baseport=9101
+
+Obviously, the email, and some of the minor options (mysql, postgresql,
+...) can be changed to suit your distribution, but the directory names
+defined above are strongly recommended, and over time the default values in
+the bacula-dir.conf and bacula-sd.conf will reflect these choices.
+
+If you have any questions about this or would like a detailed document
+describing our recommendations including packaging requirements, please
+send an email to the bacula-devel list.
+
+6. Starting with Bacula version 3.0.0 up to Bacula 5.0.0, the shared
+libraries that Bacula uses by default are named xxx-1.0.0. Starting with
+Bacula 5.0.1, we are going to name the libraries using the Bacula version.
+So in Bacula 5.0.1, the libraries will be named xxx-5.0.1. With future
+versions, the last digit may or may not change when we distribute patch
+updates (i.e. the last digit of the version changes). This will depend on
+whether or not we have changed something in the library. Hopefully this
+new procedure will resolve some of the incompatibility problems between
+different versions of the shared objects.
+
+7. The default build option for bconsole is conio (my own little console
+routines). I did this because some years ago, readline was very difficult
+to maintain -- it and where it was found seemed to change on every release.
+This generated at the time a number of support problems. It seems to me
+that since then there have been very few problems with readline. As a
+consequence, I have no problem if you want to make bconsole with readline
+enabled. It will actually give some very nice new bconsole command
+completion functionality that Eric has written. Bottom line: feel free to
+use readline or not as you please.
+
+==========================================================
+
+
+
+Release Notes for Bacula 5.0.0
+
+Release Numbering:
+-----------------------------------------------------------
+You might be wondering why this release jumps from 3.0.x to
+5.0.0 thus skipping version 4.0.0. We have done this for
+several reasons: first, we wanted a way of distinguishing
+the numbering system for the Bacula System Enterprise version
+and the Bacula Project version. So, to do so, we have decided
+that the first number of the Bacula Project version will always
+be odd, and the first number of the Enterprise version will always
+be even. Thus the Bacula Project now moves from 3.0.x to 5.0.x.
+In addition, we want to keep the Bacula Project version larger
+than the Enterprise version to indicate that the Bacula Project
+version is more advanced or has more features than the
+Enterprise version. For memory, the current Enterprise version
+is 2.6.1, and the next release (in a few months -- before June 2010)
+will be version 4.0.0.
+
+Warning:
+--------------------------------------------------------------
+Please note the three Warnings below before doing any install or
+upgrade.
+
+
+Changes since 3.0.3a (the last Bacula Project release):
+-------------------------------------------------------
+
+Bug fixes:
+1337 1351 1352 1354 1357 1361 1367 1369 1370 1373
+1376 1391 1403 1409 1420 1422 1427 1428 1431 1450
+1454 1455 1458 1456
+
+Fixed:
+ - Problem that locks the Director when the SMTP server wasn't
+ responding to the bsmtp program
+ - Restore's dir command shows incorrect file sizes
+ - Fix various problems with the reload command
+ - Fix problems with conio
+ - Eliminate several deadlocks or potential race conditions from SD
+
+Enhancements:
+ - Project 5: Truncate volume after purge
+ - Project 6: File Deduplication using Base Jobs
+ - Project 10: Restore from Multiple Storage Daemons
+ - Project 11: AllowCompression per Device
+ - Project 23: Add Maximum Concurent Jobs for Devices to balance load
+ between drives
+ - Add Accurate Fileset Options to configure accurate detection. Can use
+ checksum verification for example.
+ - Allow FD to keep root read but drop write permission (CAP)
+ - Secure handling of passwords for catalog backup
+ - Add Tab-completion for Bconsole when using Readline
+ - Add Bvfs API to query the catalog without building a memory tree
+ - Add new speed test to btape program
+ - Add new Bat screens (Autochanger content, Job view, Media view, ...)
+ - Windows version of Bat
+ - Added Spanish Bacula translation
+ - New bconsole -u nnn option to have timeout on commands
+ - Allow Migrate, Copy, and Virtual Full to read and write
+ to the same Pool
+ - show disabled -- shows disabled Jobs
+ - Add Pool File and Job retention periods (take precedence over Client)
+ - Many ACL improvements
+ - Level added to FD status Job entry
+ - Allow turning on/off Block Checksum per device
+ - Set Device Poll interval to 5 minutes -- previously did not poll
+ - Implement lock manager with bad order protection
+
+Compatibility:
+As always, both the Director and Storage daemon must be upgraded at
+the same time, and on any given machine, you must run only one version
+of Bacula. This means that on the Director and Storage daemon machines,
+you *must* upgrade your File daemon as well.
+
+Older 3.0.x and possibly 2.4.x File Daemons are compatible with the 5.0.0
+Director and Storage daemons. There should be no need to upgrade older File
+Daemons immediately. However, we recommend that you do so as soon
+as is reasonable for your situation.
+
+================== Warning !!!!!! ==========================
+
+New Catalog format in version 5.0.0 (3.1.9 or later)
+-----------------------------------------------------
+
+This release of Bacula uses a new catalog format. We provide a set of
+scripts that permit to convert a 3.0.x (version 11) catalog to 5.0.0 (version
+12). The Bacula project rpms distributed on Source Forge will automatically
+detect the database change and do the upgrade for you. We strongly
+recommend that you save a copy of your existing database before upgrading
+using rpms.
+
+The simplest way to upgrade the database assuming you are building from
+source:
+1. Stop any current version of Bacula from running.
+2. Save a copy of your existing database.
+3. Configure, build, and install the 5.0.0 version of Bacula
+ Note the new ./configure options in the manuals see the link
+ at the bottom of this file.
+4. cd <your-scripts-installation-directory>
+5. ./update_bacula_tables
+6. If you have multiple catalogs, edit the update_bacula_tables
+ script and put the name of another database, and then
+ execute the script again. Repeat this until all Bacula
+ catalogs have been updated.
+7. Start the new Bacula. If everything worked, it should
+ not print any error messages.
+
+If you start from scratch, you don't need to run the update_bacula_tables
+script because the create_bacula_tables script automatically creates the new
+table format. However, if you are using a version of Bacula older than 3.1.9
+(e.g. 3.0.3) then you need to run the update_bacula_tables script that will
+be found in the <bacula>/src/cats directory after you run the ./configure
+command. As mentioned above, before running this script, please backup your
+catalog database, and when you do running it, be sure shutdown Bacula and be
+aware that running the script can take some time depending on your database
+size.
+================================================================
+
+
+================== Warning !!!!!! ==========================
+If you upgrade a previous Win32 client installation, you must
+first stop the File daemon, then uninstall it before attempting
+the upgrade. If you do not do so, the upgrade will probably
+fail and you will need to manually find and run the
+Uninstall.exe file, before you can upgrade to the new version.
+This is because the file locations are different. If you want
+to save your previous bacula-fd.conf file, please do so before
+uninstalling it.
+================================================================
+
+================== Warning !!!!!! ==========================
+Due to permissions problems on Windows Vista and later systems,
+we no longer require SYSTEM or Administrator permissions to
+access the binaries and configuation files. If you wish
+to restrict access to these files, please see the New Features
+section of the manual for how to set access control lists.
+================================================================
+
+Note, the Win32 Installer no longer installs the Bacula Servers
+(Director and Storage daemon). See the New Features section of
+the manual for more details.
+
+============ Documentation improvements needed ==================
+
+Note!!!!! The 5.0.0+ documentation has a number of known problems:
+
+1. We have reduced the number of manuals, which has fixed many
+ of the broken links found in the old 3.0.x version, but there
+ are still some that need fixing.
+
+2. Integration of the 3.0.x features into the main manuals has
+ not yet been done.
+
+The documentation will not be completed in the near future due to lack
+manpower. If you are unhappy with this situation as we are, we suggest
+you help by submitting patches to the documentation. Thanks.
+=====
+
This release includes large number of new features and changes.
It should be more or less compatible with previous xx.conf files
and File daemons providing that you are not using any of the new
features.
+
+Please see the New Features chapter of the new manual, which documents
+some but not all the new features (we are still working on it):
+
+http://www.bacula.org/5.0.x-manuals/en/main/main/New_Features_in_5_0_1.html
+
+The ChangeLog has more details.
projects / bacula / bacula / blobdiff