- Release Notes for Bacula 1.36.0
+ Release Notes for Bacula 2.2.0
- Bacula code: Total files = 396 Total lines = 116,418 (*.h *.c *.in)
+ Bacula code: Total files = 438 Total lines = 154,329 (*.h *.c *.in)
+This Director and Storage daemon must be upgraded at the same time,
+but they should be compatible with all 2.0.x File daemons, unless you
+use some of the new features that affect the FD. In other words, you should
+not have to upgrade all your File daemons.
-Major Changes:
-- Tray monitor program (really cool)
-- Bacula Rescue CDROM (easy to make and essential for emergencies)
-- Bacula CD Image Manager
-- General bug fixes/stabilization
-- French translation of manual by Ludovic Strappazon well
- underway.
-- UTF-8 is supported in conio.
-- Improved conf scanning code allowing FileSet components to
- be put on a single line (previously everything had to be on
- a different line).
-- Win32 files restored to an alternate directory will have the
- colon following the drive letter turned into a / e.g. c:
- becomes c/. Previously the c: was stripped. This applies only
- to files written to an alternate directory (i.e. using a where=).
-- Certain open files (Word for example) can now be saved on
- Win32 systems.
-- Default for Wild-cards on Win32 systems is to fold case this
- should correct most of the problems users are having with
- exclusion on Win32.
-- Lots of improvements in the Rescue scripts -- better
- network detection, better mounting code, ...
-- The attributes spool file can now exceed 2GB.
-- Significant speed improvements when running PostgreSQL.
-- Significantly faster restore command with very large
- FileSets while building the in memory directory tree.
-- Patches directory in the source will have all patches
- that have not been applied and released (new releases are
- only generated when really critical bugs are found).
-- Bacula forces the tape drive into variable block mode
- on most systems (providing Bacula is running in variable
- block mode).
-- dbcheck updated to remove many more orphaned records.
-- Support for IPv6 (untested).
-- Modifications to the license to termination clause for
- more protection from SCO type predators. No change for
- normal users.
-- SIGHUP to Director causes it to reload conf file.
-
-- Many improvements in the documentation.
-
-New Directives:
-- Added "Rerun Failed levels = yes/no" in the Job resource
- of the Director. It will upgrade the current job to a
- higher level (Full or Differential) if a previous job
- of that level failed.
-- Added "Ignore FileSet Changes = yes/no" in the FileSet
- directive of the Director. It prevents the Director from
- immediately upgrading the job to a Full save if you modify
- the contents of the FileSet. Not recommended.
-- Added "Block positioning = yes/no" in Device resource in SD.
- If set to no, Bacula should (as yet untested) be able to
- recover data from tapes where the drive was set to fixed
- blocksize but Bacula is in variable block size.
-- Added "Multiple connections = yes/no" in Catalog record for
- allowing multiple simultaneous connections to the database.
- This is a major performance improvement for PostgreSQL and
- SQLite, but it is untested, so please test before putting
- it into production.
-- Alert Command in SD permits checking for tape drive
- alerts at the end of every job (or doing anything you want).
- An example of the command is in the default bacula-sd.conf
- file as well as in the Storage Configuration chapter of
- the manual.
-
-New Commands:
-- umount -- same as unmount.
-- delete job now permits multiple jobids and ranges, e.g.:
- delete job jobid=1,3,5,11-16
-- reload -- reloads bacula-dir.conf in Director.
-
-Items to note!!!
-- As of 1.35.5 you MUST do a database update.
-
- cd scripts-dir (or src/cats)
- ./update_bacula_tables
-
-- All daemons should be compatible with 1.34 with the exception
- of the new FileSet features such as regular expressions.
-- Regular expressions are not supported in the Win32 FD.
-
-Other Items:
-- Much better error messages from system errors particularly
- on Win32 and in running scripts.
-- Many improvements in the SD.
-- Full support for 64 bit machines.
-- btape improved test and fill commands.
-- See the ChangeLog for additional details.
+The major features are:
+- First cut of bat (Bacula Administration Tool). Note to build
+ bat you must explicitly enable it on the ./configure line, you
+ must have the Qt4 libraries loaded, and qmake and the other Qt4
+ tools must be available.
+- Red/Black restore in memory tree (500 times faster loading).
+- Much faster insertion of attributes (somewhere around 10 times).
+- The Regex Where code to allow easier relocation of restored files.
+- Socket level heartbeat for all connections (untested).
+- posix_fadvise() use in the FD to improve performance.
+- Simpler locking in the SD in the reservation system.
+- Much improved Volume reservation code that should eliminate most
+ conflicts experienced in multiple drive autochangers.
+- Detection of file size/date change during backup if enabled.
+- New Recycle Pool feature.
+- Efficient implementation of very large include/exclude lists.
+- Volumes are no longer pruned during 'status dir'
+- Pruning is now more efficient, and if a Volume is purged,
+ during pruning, it is immediately discovered.
+Other features or bug fixes:
+- Fixed bugs: 846, 809, 772, 822, 825, 824, 808, 802, 797,
+ 798, 795, 789, 791, 788, 780, 763, 782, 612, 767,
+ 775, 621, 772, 764, 766, 621, 761, 755, 750, 741,
+ 747, 742, 744, and 743.
+- Only the minumum number of volumes are pruned rather than
+ all volumes in the pool.
+- wx-console renamed to bwx-console
+- gnome-console renamed to bgnome-console
+- Migration preserves original job's FileSetId
+- Spooling implemented for migration jobs.
+- Config files can be read through a pipe, by specifying a leading |
+ in front of the configuration path/filename.
+- New memory command (bconsole) that will print the current Director's
+ memory usage, and a in use buffer dump.
+- Solaris door and event port files are no longer restored.
+- Console name changed from *Console* to -Console- to accomodate Win32
+ filename restrictions.
+- Corrected Win32 ftruncate bug.
+- Additional version information added to Job reports.
+- New -8 option for bsmtp to specify UTF-8 encoding type.
+- bsmtp will no longer add < > to target (from, to, cc) if there
+ is already a < in the target.
+- Perfer Mounted Volumes extended to mean a volume that is being
+ mounted by another job.
+- Runscript timing set to same as version 1.38.11
+- New TLS Allowed CN directive(s) permitted.
+- New bconsole 'exec' command to run external script/command.
+- Turn on FreeBSD/OpenBSD code to set EOT model on tape.
+- Drop from root done before database is opened.
+- database user and name can be configured with:
+ --with-db-name=name --with-db-user=user
+- turn on wait_for_drive in mtx-changer script.
+- rework how bar codes are handled in mtx-changer script.
+ This appears to have been an unreported bug.
+- Updated nagios plugin supplied by Christian Masopust
+- Better restricted console ACL checking.
+- New Client Connect Wait directive in Storage daemon so that
+ users can configure how long SD waits for FD connection.
+- Bacula will no longer permit pruning of the currently running
+ job (note, if other jobs are running, they may be pruned).
+- Sockets are no longer restored.
+- dbcheck works in 300K chunks so will typically run faster.
+- Include/Exclude lists can now be efficiently handled for quite
+ large sizes -- tens of thousands of entries.
+- Several memory leaks in migration and database usage were fixed.
+- New console keyword restoreclient, which specifies the client to
+ which the restore will be sent. The client keyword specifies
+ the backup client. The restoreclient keyword is optional if it is
+ not specified, the backup client will also be the restore client.
+- The disk file size is now checked to ensure that it agrees with the
+ catalog value before Bacula will append to the disk (same as tape
+ and DVD).