- Release Notes for Bacula 1.35.8
+ Release Notes for Bacula 2.2.9
- Bacula code: Total files = 396 Total lines = 116,211 (*.h *.c *.in)
+ Bacula code: Total files = 498 Total lines = 167,596 (*.h *.c *.in)
+ 82 new files, 41,221 new lines of code, 208,380 lines of change from 2.0.3
+This Director and Storage daemon must be upgraded at the same time,
+but they should be compatible with all 2.0.x File daemons, unless you
+use some of the new features that affect the FD. In other words, you should
+not have to upgrade all your File daemons when you upgrade. There is
+no database upgrade needed from version 2.0.x to 2.2.0.
-Changes for 1.35.8
-Major Changes:
-- Tray monitor program
-- Bacula Rescue CDROM
-- Bacula CD Image Manager
-- Lots of improvements in the Rescue scripts -- better
- network detection, better mounting code, ...
-- General bug fixes/stabilization
-- French translation of manual by Ludovic Strappazon well
- underway.
-- UTF-8 is supported in conio (some minor cleanup is needed).
-- Improved conf scanning code allowing FileSet components to
- be put on a single line (previously everything had to be on
- a different line).
-- Win32 files restored to an alternate directory will have the
- colon following the drive letter turned into a / e.g. c:
- becomes c/. Previously the c: was stripped. This applies only
- to files written to an alternate directory (i.e. using a where=).
-- Certain open files (Word for example) can now be saved on
- Win32 systems.
-- Default for Wild-cards on Win32 systems is to fold case this
- should correct most of the problems users are having with
- exclusion on Win32.
+Version 2.2.10 is primarily a Storage daemon reservations system
+ enhancement to 2.2.9-beta
+16Apr08
+kes Permit multiple simultaneous restores -- experiment.
+15Apr08
+kes Backport development stream SD reservation system changes.
+ See below:
+===
+16Apr08
+kes Move final volume swapping code to DCR method and
+ call it from acquire_for_read().
+kes When wrong volume is mounted during read, unload_autochanger.
+14Apr08
+kes Stop searching for Volumes in SD askdir if DIR returns the
+ same volume name twice in a row.
+13Apr08
+kes Tweak the swap Volume from one drive to another code so that
+ it now seems to work.
+kes Resolve several problems with recycling that broke the new
+ code (these problems are in 2.2.9 as well).
+kes Remove the volume lock when calling the sysop code.
+kes Don't mark a reserved volume with no writers as unused otherwise
+ jobs fail.
+12Apr08
+kes Rework class structures for VOLRES, DCR, and DEVICE to make
+ the method names a bit more logical, and for more logically
+ handling the responsibilities.
+11Apr08
+kes Remove redundant code in terminating the scheduler that just
+ causes a seg fault in many cases.
+kes Cleanup releasing a volume and make it a DCR method.
+kes Improve algorithm for detecting pre-reserved volume and
+ swapping volumes.
+10Apr08
+kes Tweak volume swapping code so it works.
+kes Correct name overloading in mount.c
+kes Replace released flag in VOLRES with reserved and add access
+ methods for the VOLRES class.
+kes Prevent volume from being released while being swapped.
+kes Refactor parts of stored/mount.c
+09Apr08
+ebl Add sanity checks for VolWriteTime and VolReadTime
+ebl Take care of bad clock changes while computing VolWriteTime
+ and VolReadTime. This should fix or limit #1066
+kes Correct error string numbers in dird/catreq.c
+kes Restructure reserving, acquiring, and mounting volumes. Calls to
+ autochanger are deferred for mount.c -- simplifes the code.
+08Apr08
+kes Do not prune any running job. It just fails the job.
+kes Lock the volumes when changing dev->reserved_device and marking
+ the volume unused otherwise the device can get reserved by
+ another job before the volume is released, thus blocking it.
+===
-New Directives:
-- Added "Rerun Failed levels = yes/no" in the Job resource
- of the Director. It will upgrade the current job to a
- higher level (Full or Differential) if a previous job
- of that level failed.
-- Added "Ignore FileSet Changes = yes/no" in the FileSet
- directive of the Director. It prevents the Director from
- immediately upgrading the job to a Full save if you modify
- the contents of the FileSet. Not recommended.
-- Added "Block positioning = yes/no" in Device resource in SD.
- If set to no, Bacula should (as yet untested) be able to
- recover data from tapes where the drive was set to fixed
- blocksize but Bacula is in variable block size.
-- Added "Multiple connections = yes/no" in Catalog record for
- allowing multiple simultaneous connections to the database.
- This is a major performance improvement for PostgreSQL.
+Version 2.2.9 is a bug fix to version 2.2.8:
+- Close bat console windows first to eliminate error message
+ from the notifier.
+- Remove useless code in Scheduler that causes seg fault on
+ termination.
+- Correct some SD catalog request error messages.
+- Don't allow pruning of any running job.
+- Turn off code in read_record that causes a seg fault in the SD
+ when reading past an EOS_LABEL.
+- Turn off unloading the autochanger in reserve.c as it just
+ causes problems.
+- Lock volumes when unreserving a device.
+- Do not mark volume unused when recycling.
+- Fix bug #1068 fixes a SD crash when using Virtual autochanger.
+- Generate correct JobMedia records during spooling/despooling when
+ running concurrent jobs. Thanks to Tom Ivar Helbekkmo
+ <tih@hamartun.priv.no> for excellent analysis and testing.
+- *Massive* commit of all fixes and back ports to create 2.2.9
+ Mostly SD reservations enhancements.
+- Fix Win32 FD backup/restore memory leak due to improper termination
+ of BackupRead/Write. This fixes bug# 1038.
+- Fixes a StorageId problem with volumes after migration.
+- Implements autostart scripts for Debian
+- Fix mtx-changer.in for broken Debian mt program.
+- Apply doc fix from bug #1062.
+- Resolve crash and improper restore wx-console Win32 restore
+ GUI. Fixes bug #1065.
+- Update Win32 wxWidgets to latest version.
+- Attempt to do correct handling of Win32 mount points. Should
+ fix bug #1046.
+- Add const to AIX prototype for initgroups()
+- Undo bug #1047 heap overrun fix as it is not correct.
+- Fix to the JobMedia patch, which introduced a new problem.
+- Fix creating first JobMedia record during Migration to include
+ proper index. This caused slow restores of migrated jobs.
+- Fix bug #1047, do not strip paths on symbolic links.
+- Set catalog backup database and user name from values specified on
+ the ./configure line.
+- Apply patch to correct bug #1031, about wrong pool source information
+ in job report.
-Items to note!!!
-- As of 1.35.5 you MUST do a database update.
-
- cd scripts-dir (or src/cats)
- ./update_bacula_tables
-
-- All daemons should be compatible with 1.34 with the exception
- of the new FileSet features such as regular expressions.
-- Regular expressions are not supported in the Win32 FD.
+Version 2.2.8 is a bug fix to version 2.2.7:
+- It fixes bugs: 1036, 1033(doc), 1028, 1040, 1045(doc), 1030,
+ 1042(partially), and possibly bugs 1018 and 1032.
+ Bugs 1018 and 1032 involve problems with multiple-drive autochangers,
+ and are difficult to reproduce.
+ See the ChangeLog for more details.
-Other Items:
-- See below
+Version 2.2.7 has several new features and several important bug fixes
+ since version 2.2.6:
+- It fixes bugs: 1009, 1022, 1024, 1019, 1012, 1021, 1020
+ 1007, 1008. For more details, please see the technotes-2.1 file.
+- Fixed a seg fault reported by Frank Sweetser that depended on
+ exact path lengths, but the problem was in bsnprintf.c
+- Double quoting include filenames (@xxx) in Bacula conf files is now
+ possible, thanks to a patch by Michael Stapelberg.
+- You can pipe input to include filenames (@|prog) by using a vertical
+ bar, thanks to the above patch.
+- A daylight savings time bug in the Win32 bsmpt was fixed by a patch from
+ Nerijus Baliunas.
+- Marc Cousins submitted a patch that permits building the PostgreSQL
+ driver with version 8.3.
+- The configure option --archivedir has been changed to --with-archivedir
-Changes to 1.35.5:
-22Sep04
-- Incremented the release number because this version requires
- an update to the database.
- Use:
- cd src/cats
- ./update_bacula_tables
- to update an existing database.
-- Implemented EndFile and EndBlock in the Media record. This will
- allow Bacula to know exactly when to stop reading a tape if the
- stupid tape driver does not give a logical end of tape indication
- and Bacula writes to the end of the tape getting an I/O error.
-- Added new routines to update the database, and there are
- new database creation routines to add the two new Media columns.
-- The Media record is updated each time a JobMedia record is created.
- This keeps the Media record up to date.
-- Undid the code to use automatic type converions to char * in
- POOL_MEM. This is due to the ugly consequences of essentially
- destroying the class type nature of the class.
-- Removed all the old mp_char() #define code.
+Version 2.2.6 is a minor bug fix release to version 2.2.5
+- It fixes bugs: #1003, 942, 982, 990(response only), 991,
+ 993, 986, 976.
+- Fix bat crash wen it cannot connect to Director.
+- Fix joblist failure bug in bat.
-Changes to 1.35.4:
-22Sep04
-- Add additional doc.
-- Implement automatic POOL_MEM type conversion to char *. Thanks
- to Martin Simmons for the suggestion.
-- Remove some unneeded function overloading -- need removed by
- automatic type conversion.
-21Sep04
-- Correct segfault in message.c with debug=200 (new code).
-- Fix bug 109 verify with no options prints garbage.
-- Add ioctl(MTIOCGET) call to clrerror_dev() in dev.c. As reported
- by Frank Kardel, this should clear error conditions on NetBSD.
-20Sep04
-- Modify the rescue script to create mount_drives with
- the order specified by Philip Nash (mkdir, mount).
-- Tweak install chapter of French manual to add new paragraph
- from English.
-- Tweak restore tree message to be a bit clearer.
-- Modify watchdog to wakeup after 60 seconds, or wakeup if
- there is work to do.
-- Modify watchdog stop routine to "ping" watchdog so that it
- stops immediately rather than after sleep time.
-- Fix btape to use new dcr blocks rather than its own.
-- Fix butil.c to correctly handle Volume names for the
- utility routines (broke when updating to dcrs).
-11-19Sep04 (vacation)
-- Implement multiple Storage specifications in the Job resource
- (AND) each containing multiple specifications (OR). Not yet functional.
- Note, this needs more work as most things now use
- job->storage[0]->first() rather than looping through devices.
-- Implement "Multiple connections = yes/no" in Catalog record for
- allowing multiple simultaneous connections to the database.
-- Add new mac.c (Migrate, Archive, Copy) to dird -- not yet implemented.
-- Implement a new POOL_MEM class that automatically allocates
- and deallocates a pool buffer.
-- Overload a number of utility routines to permit using both
- POOLMEM and POOL_MEM.
-- Start converting to using POOL_MEM.
-- There were a number of Bacula console ACL checks missing in
- ua_run.c. It allowed users to run jobs they really should not.
-- Correct a number of dates on the Copyright.
-- Overload pm_strcpy() and pm_strcat() to handle new POOL_MEM
- class.
-- Overload bash/unbash_spaces to handle new POOL_MEM class.
-- Make a *MASSIVE* pass through the Storage daemon eliminating
- all use of jcr->VolumeName and jcr->VolCatInfo in favor of
- dcr->...
-- Eliminate all all redundant arguments from calling sequences
- in SD. This poses a number of problems due to the old way blocks
- and records were allocated and released all the time. They are
- now contained in the dcr. The problem is that old habits die hard
- and there are still places where everything is not right.
-- Implement "Block positioning = yes/no" in Device resource in SD.
+Version 2.2.5 is a major bug fix release to version 2.2.4
+- It fixes the following bugs: #961, 962, 963, 969, 968, 960,
+ 964, (possibly 935 and 903), 953, 953, 967, 966, 965, 954,
+ 957, 908, 958, and 955.
+- It also improves listing performance problems in bat pointed
+ out by Chris Howells.
-Changes to 1.35.3:
-09Sep04
-- Add "Multiple Connections = yes/no" in catalog record. Only
- the variable is implemented, no code yet.
-- Close *all* FD unless debug on.
-08Sep04
-- Add first cut of UTF-8 support to conio. It "seems" to be working
- pretty well. Moving by words will definitely not work though.
-- Improve detection and setting of gateway in the
- network_start script.
-07Sep04
-- Modify scan code so that in most places scanning will
- continue across the end of a line.
-05Sep04
-- Begin major phase of 1.35 documentation.
-- All outstanding bugs are fixed.
-- Implement changes and improvements to rescue scripts as
- proposed by Gaurav.
-05Sep04
-- Add correction to Phil's previous patch.
-- Send all queued messages in SD and FD prior to closing down
- the job.
-- Send queued messages in Jobs before terminating the job
- so that the messages print before the job report.
-- Add a destructor so that the Console ACLs are properly
- freed.
-04Sep04
-- Implement isolinux boot disk.
-- Integrate Phil Stracchino's code (thanks for Matt's help).
- It permits lists and ranges of jobids on the delete as in:
- delete job jobid=1,3,5,11-16
-03Sep04
-- Apply Mike Acar's suggestion when looking for the next volume
- to check purged volumes for recycling before doing a purge.
-- Make some improvements to CDROM disk.
-- Take another crack at ignoring drive open() errors during
- polling.
-02Sep04
-- Add eliminate orphaned job records; eliminate admin records,
- and eliminate restore records to dbcheck.
-- replace sprintf by bsnprintf() in dbcheck.
-- Added scan target to makefile in rescue cd to print scsi
- devices.
-- Added argument to berrno::strerror() to pass errno.
-- Cleaned up a few more old strerror() calls and eliminated a
- few of the now unnecessary set_errno() calls.
-- Fixed a bug in the polling code that prevented more than 100
- label reads (insanity check disabled if polling).
-- Ignore bad return from open_device() if polling.
-- Short circuit code if fatal error return from read_label() in
- mount.c
-01Sep04
-- Add index file to JobId field of File records for PostgreSQL.
-- Correct several bugs in the job queue scheduler concerning
- rescheduled jobs: 1. The SD status was not cleared causing a
- wrong status to be displayed by Dir after rescheduling. 2. All
- rescheduled jobs became zombies because the jcr use_count was
- not decremented properly.
-- Make the Catalog resource required in Client records.
-- Order the listing of where a file is (item 2 on the restore
- menu) by StartTime.
-- Clarify when a filename only and a full path + filename must
- be entered in items 2 and 8 of the restore menu.
-- Fix logic error in resolution of names on IPv4 systems.
+Version 2.2.4 is a minor bug fix release to version 2.2.3
+- Possible fix for authorization problems bug #953.
+- Possible fix for bug #908.
+- Add waits to multiple exit detection code to try to force pid
+ file to always be deleted.
+- Restore good dev.tar.gz to rescue set appropriate binary property.
+ This fixes bug #950.
+- Fix seg fault in error exit of acquire_for_read after unsuccessfully
+ trying to switch drives by checking for blocking before unblocking.
+ Fixes bug #906.
+- Cancel storage daemon in all cases where FD reports error. This
+ should fix virtually all cases of bug #920 and will ensure that Devices
+ are released as soon as possible.
+- Fix error message that was clobbered when Dir tells SD it does not
+ have write permission on Volume. This should fix a minor point
+ in bug #942, but not the main problem.
+- Fix migration code to get correct Volume name with multiple volumes
+ by skipping |. Fixes bug #936.
+- Implement patch supplied by Landon to fix bug #944 where using
+ TLS with bconsole uses 99+% of the CPU.
+- Fix bug #946 about "bacula-dir -t" which doesn't works
+ as expected.
+- Using "m" in bconsole will show messages as in prior versions
+ and not memory usage.
-Changes to 1.35.2 released 01Sep04:
-30Aug04
-- Inhibit printing of FileSet for a restore as it is misleading.
-- Cleaned up a number of minor scripting problems with the CDROM
- creation.
-- Fixed a race condition causing a Director crash on termination,
- if a large number of SIGHUPs were sent during a multiple concurrent
- set of backups.
-28Aug04
-- Completed integration of Rescue CD scripts with Bacula source.
-28Aug04
-- Added Ignore FileSet Changes = yes
-- Added more error checking to the spooling code.
-24Aug04
-- Applied a patch from Peter Eriksson that removes a dynamic stack
- allocation (replaced by alloca) and fixes some const problems.
-- Fixed a free() of a static variable in the new IP code bnet.c
-- Got the new Bacula Rescue CDROM booting.
-- Replaced a dynamic template by a simple store when using the
- native C compiler.
-- Reworked some of the block.c error handling.
-- Changed a Dmsgx(000, to Dmsgx(100 in dev.c that was dumping
- debug output on a user.
-- Integrated patch from 1.34.6 block.c to 1.35
-17Aug04
-- Fix conio.c problem on Solaris.
-- Add debug code to lock_jcr_chain().
-- Lock jcr chain around less code.
-- Implement call by reference for Mmsg() and pm_strxxx() to
- simplify calls.
-- New IP address specification is used as follows:
- [sdaddresses|diraddresses|fdaddresses] = { [[ip|ipv4|ipv6] = {
- [[addr|port] = [^ ]+[\n;]+] }] }
+- Note, you need GTK >= 2.10 to be able to link the Tray Monitor
+ program.
- so it could look for example like this:
- SDaddresses = { ip = {
- addr = 1.2.3.4; port = 1205; }
- ipv4 = {
- addr = 1.2.3.4; port = http; }
- ipv6 = {
- addr = 1.2.3.4;
- port = 1205;
- }
- ip = {
- addr = 1.2.3.4
- port = 1205
- }
- ip = {
- addr = 1.2.3.4
- }
- ip = {
- addr = 2001:220:222::2
- }
- ip = {
- addr = bluedot.thun.net
- }
- }
- as a consequence, you can now specify multiple IP addresses and
- ports to be used. In the case of a server, it will listen on
- all those that you specify. In the case of connecting to the server,
- Bacula will attempt connecting to one at a time until it succeeds.
- And, in a few other special cases, Bacula will use only the first
- address specified.
+Version 2.2.3 is a critical bug fix release to version 2.2.2
+- Fix bug #935, and possibly also bug #903 where files were not
+ restored. MediaId was not properly set in JobMedia record after
+ a Volume change. This bug is known to affect all versions from
+ 2.0.0 on, and probably versions prior to that. A detailed analysis
+ of the bug can be found at:
+
+ http://www.bacula.org/downloads/bug-395.txt
+
+- Add ./configure search in qwt-qt4 for qwt package
+- Apply Martin Simmons patch that should turn off the new API usage
+ when batch insert is turned off allowing building on older
+ PostgreSQLs.
+- Note, you need GTK >= 2.10 to be able to link the Tray Monitor
+ program.
- The default port numbers are still the same and the services and hosts
- are also resolved by name. So now you could use the real names for the
- port numbers.
+Version 2.2.2 is a minor bug fix release to 2.2.1
+- Detect if new PosgreSQL batch insert API is present.
+- Correct incorrect mempool call causing Director crash on older
+ systems that do not have va_copy().
+- Update spec files for 2.2.1 release
-Release 1.35.1 16 August 2004:
-- Added Tape Alert feature (see Alert Command).
-- New IPv6 code (untested)
-- New way of specifying Addresses and Ports -- permits having
- server listen on multiple ports.
-- Regular expressions in Options directive.
-- Reader/writer programs in Options (not yet fully implemented,
- please do not use).
-- Fixed specification of bind address on Win32 (thanks to
- Martin Simmons).
-- Update all Volumes from Pool record.
-- Update License to terminate rights of anyone suing a GPL licensor.
-- Improved error messages for Win32 and when running external
- programs (e.g. RunBeforeJob).
-- Implement reload of conf file in Directory on SIGHUP.
-- Building restore tree is much faster on large filesets
- due to binary insert.
-- Alert Command in Device resource of Storage Daemon.
-- New IP address and port directives.
-- reader = xxx, writer = yyy in Options within FileSet of
- Director's conf file.
-- regex = xxx in Options within FileSet of Director's
- conf file.
-- New command options: update AllFromPool updates all
- Volumes with Pool defaults.
-- .backups client=xxx (for GUI programs).
-- A duration specification may have any number of integer/modificator
- specifications. E.g.:
- 1 week 2 days 3 hours 10 mins
- 1 month 2 days 30 sec
-- Print error message if Alert Command fails in bpipe_open().
-- Doc Alert command.
-- Eliminate unnecessary class in findlib/attribs.c
-- Add necessary empty files to new tray-monitor directory.
-- Implement Class with template in findlib/attribs.c to do casting
- of uint64_t into stat packet types to avoid compiler warnings.
- Thanks to Meno for this idea.
-- Make some modifications to satisfy VC++.
-- Apply Martin Simmons' second patch to compat.cpp to fix the line
- I previously missed.
-- Apply Meno's fix to bnet that corrects use of ipaddr after free_addresses,
- back out my kludges, and it works.
-- Modified configure.in to by default add -Wall.
-- Found some problems with printing IP addresses -- will notify Meno.
-- Added printing Pool to Job report.
-- Fixed several places where dlists were not being released
- (term_job_server, ...)
-- Started implementing New() for dlists. Spent a lot of time,
- but could not get it to work.
-- Fixed a mutex deadlock between the job queue scheduler and the
- watchdog.
-- Made add_address() static.
-- Added bsnprintf to address_conf.c
-- Apply Marin Simmons patch to inet_aton() in compat.
-- Build on Win32 -- required a few changes because of new IP code.
-- Implement program reader code in Dir and FD -- not tested, and
- a few corrections for writer code are needed in FD.
-- Rework SQL for pruning. Add Admin pruning. Prune failed
- jobs in Verify and Restore.
-- Don't put commas in listing produced in restore so that users
- can cut and past JobIds without having commas in the way.
-- Change size_t to socklen_t in filed.c -- reindent a bit.
-- Remove addr_list->size from buf size definition in bnet.c
-- Create a Developer's document.
-- Add prompt for Update volume from pool and update all
- Volumes from pool.
-- Implement user friendly time duration input editing.
-- Add buf len argument to edit_utime().
-- Added eliminate orphaned Client records to dbcheck.
-- Implement Alert Command in SD Device conf.
-- Fix updating a Volume from the pool record -- it never changed
- anything.
-- Implement updating all Volumes from pool record.
-- Add patch by Denis Shaposhnikov that fixes excludes of directories
- in new style FileSets.
-- Merge Meno's IPv6-1 code.
-- Update License to terminate rights of anyone suing a GPL licensor.
-- Add Pruning doc sent by Bryce Denney
-- Correct inconsistencies in restore command doc pointed out by user.
-- Don't edit commas in SQL intergers if they are not stricly integer.
-- Update all pools in all DBs when starting the Director.
-- Implement final cut of berrno and update Win32 code.
-- Update copyright to include a termination clause. Add copyright to
- binaries.
-- Implement .backups client=xxx for Nicolas.
-- Make first cut at implementing berrno class to handle Unix, Win32
- and bpipe errors. Bpipe still needs to be implemented.
- This fixes (not yet tested) the Win32 errno problems in the compat lib.
-- Fix btape compile problem reported by Martin Simmons -- thanks.
-- Add ./configure detection of sys/tape.h
-- Apply two fixes to recent changes to dev.c submitted by
- Martin Simmons.
-- Add checks in btape for correct size of off_t, and correct editing
- of 32 and 64 bit values.
-- Move supported OS/hardware into a chapter by itself.
-- Fix bscan, which did not handle walking dcr list.
-- Remove old attach_jcr_to_device() code.
-- Fix config from Andy Wettstein's patch to use bitypes.h and detect
- uint32_t, ... definitions.
-- Fix a few compiler warnings because of casting pointers to int and
- vise versa.
-- Do some minor cosmetics to query.sql. nothing changed.
-- Don't call stop_thread_timer() in backup.c if timer not started.
-- Fix bug with out of order JobIds on restore.
-- Make watchdog examine queues once every 10 seconds instead of once
- a second.
-- Add more bools to dev.c
-- Fix walking attached DCRs in bscan.c
-- Doc updates
-- Start work on rescue files. Integrated RAID changes.
-- Print a message when query.sql moved to query.sql.old during install.
-- Move setting of FreeBSD chflags() to after utime() to avoid error
- messages is immutable bit is set.
-- Turn off heartbeat in FD when -s is given so that we can
- debug without a flood of signals.
-- Close and reopen the device during an append test in
- btape. This better tests appending as if Bacula stops/restarts.
-- Remove old attach/detach_jcr_to_device() code
-- Add new attached_dcrs code.
-- Remove unnecessary subroutine for bsnprintf.
-- Replace sprintf() by home-grown code in edit_uint64 ...
-- Begin implementation of dev->attached_dcrs.
-- Remove scripts/fd.in from configure.in
-- Add printing of JobId when a Job is started from the console.
-- Remove fd/fd.in from scripts directory.
-- Fix a number of bugs in dbcheck concerning the -c option
- (i.e. with a config file).
-- Made RH start scripts use -u and -g options.
-- Many more DCR changes.
-- Add job message indicating that the job has been rescheduled
- and when.
-- Fix job end time so that it is always updated. Previously it
- was not updated when a job was rescheduled.
-- Correct SQL for restoring job by path/name. It could sometimes
- pickup the wrong JobId -- submitted by a user.
-- Add a number of "%s" in editing database errors -- security issue.
-- Ensure that the NumVols is incremented and decremented in the
- pool record when Volumes are created or deleted.
-- Cleanup error handling when labeling a tape. If vol was read-only,
- the device would still be marked as having found a label.
-- Put ftCreationTime into st_ctime of stat packet. Hopefully
- this will fix the problem of noticing files have been moved
- into the save path after a Full save.
-- Fix bug in "status dir" where not all entries are listed.
-- Cleanup some improper result printing in configure.
-- Optimize a couple of insertions in binary_insert of dlists.
+Version 2.2.1 is mainly a minor bug fix release to version 2.2.0,
+ the main changes since 2.2.0 are:
+- Fixed bugs #921, 930, and 923.
+- More portable timezone offset in bsmtp thaks to Attila Fülöp.
+- Fix several bat issues.
+- Use GTK+ calls instead of egg files in tray-monitor.
+- Win32 service routines rewritten
+- Updated projects file
+Please see the ChangeLog for details.
-Release 1.35.0 08 July 2004:
-- Apply Christopher Hull's const patch for PostgreSQL
-- Add code to block.c to detect if block header is destroyed.
-- Add debug code for memset checking for zeroing 1900-3000 bytes
- which is what happened to the block headers.
-- If block header is destroyed, read the next block. Probably
- should return with new status similar to the SHORT block
- return.
-- Add more debug info to bls for bad blocks.
-- More implementation of DCRs.
-- Eliminate argument passing in SD by using dcr.
-- More int->bool conversions.
-- Add file:block to a number of read/write error messages.
-- More int -> bool conversions.
-- Modify the SD piece by piece to use DCRs everywhere.
-- Cleanup some printout for query command.
-- Fix typo in cats/mysql.c
-- Work on cleaning up tape driver a bit (use bools, better calling
- sequences).
-- Attempt to fix multi-Volume disk backup. Needs to be tested.
-- Add Regular expressions to FileSet options.
-- Correct configure.in to use ${MAKE} for doing the dependencies.
-- Make MySQL and PostgreSQL try for 30 seconds to connect before
- giving up.
-- Correct Gnome 1.4 Makefile to build without cats library.
-- Correct a crash reported (with patch) by Jonathan Soong
- when attempting to backup an ACL on a symlinked file.
-- Fixed an off by one bug in the new resources pointer code.
- res_head array was one too small.
-- Added Errors to last_job list. This allows detecting jobs
- that terminated in a warning.
-- Implement setting the Win32 icon to yellow instead of red
- when the job terminated OK but with warnings.
-- Fix the Win32 makefile and VC project file. The links were
- not including the Win32 dlls.
-- Delete some old Win32 code that was turned off.
-- Eliminate a few more Win32 compiler warnings.
-- Reduce the output produced by NIS (Win32 install builder).
-- Simplify some of the #ifdefing in compat.h
-- Rewrite spooling error handling when I/O error occurs. It is
- a bit tricky, requiring to truncate the file so that a despooling
- will work correctly. Needs to be tested.
-- Make better subroutines for setting up for a new job.
-- Start putting all DB ids on #defines (going to 64 bits).
-- Fix gnome-console Makefile.in to work again.
-- All "level=Incremental/Decremental" to the estimate command. This
- required some re-arrangement of subroutines at a fairly low level.
-- Apply Piotr Jaworski's patch (patch-r-status.diff) to update the
- catalog status when a backup job starts running.
-- Add (char*) cast to readline call in console.c for old readlines.
-- Copy Makefile.in from gnome2-console to gnome-console (to eliminate
- need for cats library).
-- Modify spooling code to handle write error (e.g. spooling disk full)
- more gracefully. Previously despooling would fail.
-- Reduce casting in smartall.c a bit and add counters for
- bytes, max_bytes, buffers and max_buffers.
-- Fixed reload algorithm to stack both job end callback and the
- table id.
-- Fixed the orphaned buffer after reload (job_end_push had to be
- destroyed.
-- Destroy cond var (jcr->term_wait) only if initialized.
-- Sort the Scheduled Jobs list by start-time, priority.
-- Implement resources on a pointer.
-- Fix Gnome console crash on up/down arrow with no history.
-- Finish first cut of SIGHUP code. To make really work need res
- on a single pointer rather than in fixed memory.
-- Fix a number of places in query.sql where multiple JobIds are
- printed (due to JobMedia records).
-- Add new query: List jobs on Volume given Volume name.
-- Correct socket close on Win32 in bnet.c (in addition to compat.cpp).
- Caused fd leak in Win32 for each connection.
-- Remove vol labeled test in askdir update_volume_info so that non-labeled
- Volume in catalog can be marked in error.
-- Close socket in SD when connection rejected. Caused fd leaks.
-- Initialize job_start_wait cond variable after every new_jcr() otherwise
- NetBSD gets error in library when trying to delete it without being inited.
-- Fix typo (9 instead of 0) return status in write_new_volume_label.
-- Fix mount.c to call routine that correctly marks a volume in error.
-- Move code to rewrite volume label to subroutine -- a bit cleaner.
-- Finish implementation and testing of new restore tree code.
-- Implement feedback while tree is loading.
-- Eliminate printing INFO message in UpdateDB (cats) -- it generates
- "false" error messages.
-- Eliminate some GTK error messages when running the Gnome2 console.
-- Begin restructuring tree.c for inclusion of the binary_insert()
- routine.
-- Apply Peter Eriksson's lib file order changes in linking for IRIX.
-- Abort configure if Internal is selected as the database.
-- Add testimonials to the Web page
-- Add the bugs list to the Web page "lists".
-- Clarify the English in SuSE and Slackware when SD not running.
-- Applied another extern "C" patch from Peter Eriksson.
-- Fixed a bunch of VC warning messages.
-- Applied the patches sent by Andreas Jellinghaus: build Gnome and
- wx-console in client-only build if configured; add ./configure option
- to permit setting of sbin modes -- default is 0745 as before; remove
- cats library from Gnome console build; remove old version from Gnome
- About box. Thanks Andreas.
-- Applied Peter Eriksson's const changes to the source code. Thanks Peter.
-- Implemented a binary_insert() method for dlists -- intended to be used
- in the restore tree routines.
-- Turned on my bsscanf() code, which replaces sscanf() by my routines, which
- are a subset of sscanf() used by Bacula, but which have known 32/64 bit
- behavior rather than vendor dependent !@#$%*.
+Notes on 2.2.0 release follow:
+
+Areas requiring caution or testing:
+- You must have the thread safe version of MySQL client libraries loaded
+ to build with MySQL enabled.
+- Volumes are pruned only when absolutely necessary -- this may cause
+ your database to grow compared to prior Bacula versions.
+- Solaris door and even port files are no longer restored (equivalent
+ to what we do with sockets).
+- SQLite is no longer supported for Solaris -- it fails too often with
+ bus errors. SQLite3 should work on Solaris.
+- The default setting for SQLite3 is now 'PRAGMA synchronous=OFF'.
+ This makes it run 30 times faster, but increases the possiblity
+ of a corrupted database if your server shuts down unexpectedly.
+ The default behavior can be changed in src/version.h
+- Restore on Win32, and in particular on Vista is untested. Please
+ test before relying on it. It should backup and restore reparse
+ points.
+- Win32 servers are untested, and very likely not to work.
+
+The major new features are:
+- Much faster insertion of attributes (somewhere around 10 times),
+ many thanks to Eric Bollengier and Marc Cousin.
+- First release of bat (Bacula Administration Tool). Note to build
+ bat you must explicitly enable it on the ./configure line, you
+ must have the Qt4 version 4.2 or later libraries loaded, the qwt
+ (Qt Graphics) package loaded, and qmake and the other Qt4 tools
+ must be available. Most of the implementation was done by Dirk Bartley.
+- Red/Black restore in memory tree (500 times faster loading).
+- The Regex Where code to allow easier relocation of restored files
+ thanks to Eric.
+- Socket level heartbeat for all connections (untested).
+- posix_fadvise() use in the FD to improve performance reduces
+ swapping due to opening/reading lots of files. Win32 equivalent
+ implemented.
+- Much improved Volume reservation code that should eliminate most
+ conflicts experienced in multiple drive autochangers.
+- Simpler locking in the SD in the reservation system.
+- Detection of file size/date change during backup if enabled.
+- New Recycle Pool feature -- thanks to Eric.
+- Efficient implementation of very large include/exclude lists.
+- Volumes are no longer pruned during 'status dir'
+- Pruning is now more efficient, and if a Volume is purged,
+ during pruning, it is immediately discovered.
+- License is now GPL v2 without modifications, fix a few copyright
+ mistakes made when adding FSFE copyright notice.
+
+New ./configure options:
+- --enable-bwx-console
+- --enable-bat
+- --with-qwt=
+- --with-db-name=
+- --with-db-user=
+- --enable-batch-insert
+
+New bconsole commands:
+- exec
+- memory
+- update recyclepool
+- .sql
+- .api
+- .pwd (in restore tree)
+- restoreclient (keyword)
+- backupclient (keyword)
+- regexwhere (keyword)
+- update jobid (new command)
+- recyclepool (keyword)
+
+New directives:
+- Heartbeat Interval (bconsole.conf)
+- Heartbeat Interval (bacula-dir.conf in Director, Client, Storage)
+- TLS Allowed CN (bacula-dir.conf in Client)
+- Regex Where (bacula-dir.conf in Job)
+- Strip Prefix (bacula-dir.conf in Job)
+- Add Prefix (bacula-dir.conf in Job)
+- Add Suffex (bacula-dir.conf in Job)
+- Recycle Pool (bacula-dir.conf in Pool)
+- FailJobOnError (bacula-dir.conf in RunScript)
+- CheckFileChanges (bacula-dir.conf in FileSet)
+- StripPath (bacula-dir.conf in FileSet)
+
+Other features or bug fixes:
+- Fixed bugs: 916, 910, 917, 914, 906, 907,
+ 842, 830, 893, 861, 888, 886, 807, 877, 872
+ 885, 887, 864, 874, 882, 881, 863, 859,
+ 856, 854, 845, 847, 846, 809, 772,
+ 822, 825, 824, 808, 802, 797, 798, 795, 789, 791,
+ 788, 780, 763, 782, 612, 767, 775, 621, 772, 764,
+ 766, 621, 761, 755, 750, 741, 747, 742, 744, and 743.
+- Configure bat with --enable-bat. Define qwt libraries with
+ --with-qwt=<dir>. See Installation chapter of manual for details.
+- Create a depkgs-qt package that has both Qt4 and qwt, which are
+ needed to build bat. Most modern Linux systems will have both
+ these packages in the distro.
+- Storage overrides delete all previous storage definitions instead
+ of prepending.
+- One should be able to mount and unmount removable devices if the
+ Device resource has Removeable Media set and the mount and unmount
+ directives are defined.
+- ./configure will do a better job of searching for qwt libraries.
+- The Win32 version can no longer be shutdown from the tray monitor.
+ Use the command line or the Services panne.
+- Keep prune_volumes() from pruning the whole Scratch pool.
+- More debug output in status storage.
+- Correct moving a Scratch volume from pool to pool (some
+ critical columns were lost).
+- Different locking in reservations and despooling systems,
+ which means more micro-locking and less macro-locking, which
+ should give a lot more concurrency at the expense of slightly
+ (<0.1%) more overhead due to more locking/unlocking, but
+ concurrent jobs should run much faster.
+- Additional drive reservation algorithm that should solve a lot of
+ the problems experienced with multiple drive autochangers.
+- Storage daemon status command enhanced to more clearly show Volume,
+ pool and media type when a job is waiting.
+- Made bsmtp work with more strict SMTP servers.
+- Detect doubly freed buffers in smartall.c
+- wx-console renamed to bwx-console (Fedora request)
+- gnome-console renamed to bgnome-console (Fedora request)
+- Migration preserves original job's FileSetId
+- Spooling implemented for migration jobs.
+- Config files can be read through a pipe, by specifying a leading |
+ in front of the configuration path/filename.
+- New memory command (bconsole) that will print the current Director's
+ memory usage, and an in use buffer dump.
+- Console name changed from *Console* to -Console- to accomodate Win32
+ filename restrictions.
+- Corrected the Win32 ftruncate bug.
+- Additional version information added to Job reports.
+- New -8 option for bsmtp to specify UTF-8 encoding type.
+- bsmtp will no longer add < > to target (from, to, cc) if there
+ is already a < in the target.
+- Prefer Mounted Volumes extended to mean a volume that is being
+ mounted by another job.
+- Runscript timing set to same as version 1.38.11
+- New TLS Allowed CN directive(s) permitted.
+- New bconsole 'exec' command to run external script/command.
+- Turn on FreeBSD/OpenBSD code to set EOT model on tape.
+- Drop from root done before database is opened.
+- Database user and name can be configured with:
+ --with-db-name=name --with-db-user=user
+- Turn on wait_for_drive in mtx-changer script.
+- Rework how bar codes are handled in mtx-changer script.
+ This appears to have been an unreported bug.
+- Updated nagios plugin supplied by Christian Masopust
+- Better restricted console ACL checking.
+- New Client Connect Wait directive in Storage daemon so that
+ users can configure how long SD waits for FD connection.
+- Bacula will no longer permit pruning of the currently running
+ job (note, if other jobs are running, they may be pruned).
+- Sockets are no longer restored.
+- dbcheck works in 300K chunks so will typically run faster.
+- Include/Exclude lists can now be efficiently handled for quite
+ large sizes -- tens of thousands of entries.
+- Several memory leaks in migration and database usage were fixed.
+- New console keyword restoreclient, which specifies the client to
+ which the restore will be sent. The client keyword specifies
+ the backup client. The restoreclient keyword is optional if it is
+ not specified, the backup client will also be the restore client.
+- The disk file size is now checked to ensure that it agrees with the
+ catalog value before Bacula will append to the disk (same as tape
+ and DVD).