- Release Notes for Bacula 1.36.0
+ Release Notes for Bacula 1.37.18
- Bacula code: Total files = 396 Total lines = 116,418 (*.h *.c *.in)
+ Bacula code: Total files = 425 Total lines = 137,071 (*.h *.c *.in)
+Note! The DB has been upgraded from version 8 to 9 and requres
+a DB upgrade.
Major Changes:
-- Tray monitor program (really cool)
-- Bacula Rescue CDROM (easy to make and essential for emergencies)
-- Bacula CD Image Manager
-- General bug fixes/stabilization
-- French translation of manual by Ludovic Strappazon well
- underway.
-- UTF-8 is supported in conio.
-- Improved conf scanning code allowing FileSet components to
- be put on a single line (previously everything had to be on
- a different line).
-- Win32 files restored to an alternate directory will have the
- colon following the drive letter turned into a / e.g. c:
- becomes c/. Previously the c: was stripped. This applies only
- to files written to an alternate directory (i.e. using a where=).
-- Certain open files (Word for example) can now be saved on
- Win32 systems.
-- Default for Wild-cards on Win32 systems is to fold case this
- should correct most of the problems users are having with
- exclusion on Win32.
-- Lots of improvements in the Rescue scripts -- better
- network detection, better mounting code, ...
-- The attributes spool file can now exceed 2GB.
-- Significant speed improvements when running PostgreSQL.
-- Significantly faster restore command with very large
- FileSets while building the in memory directory tree.
-- Patches directory in the source will have all patches
- that have not been applied and released (new releases are
- only generated when really critical bugs are found).
-- Bacula forces the tape drive into variable block mode
- on most systems (providing Bacula is running in variable
- block mode).
-- dbcheck updated to remove many more orphaned records.
-- Support for IPv6 (untested).
-- Modifications to the license to termination clause for
- more protection from SCO type predators. No change for
- normal users.
-- SIGHUP to Director causes it to reload conf file.
-
-- Many improvements in the documentation.
+- This version has a new DIR <--> SD protocol. Both must be
+ upgraded at the same time. Deamons are not compatible with
+ prior versions. All FDs must be upgraded.
+- There is a new database format that is not compatible
+ with previous databases.
+- SQLite3 support, but it seems to run at 1/2 to 1/4 the speed of
+ SQLite2.
+- Multiple drive autochanger support.
+- Support for ANSI/IBM labels.
+- New communications protocol between DIR and SD to reserve
+ drives.
+- Python Event support has been added. See below for
+ configuration and details. Unfortunately, it is not yet complete
+ and the only really useful function is defining a new
+ Volume name.
+- DVD writing support, using parts, and a lot of new directives in
+ the Device resource of the Storage configuration file thanks
+ to Nicolas Boichat.
+- Seven new options keywords in a FileSet resource:
+ ignorecase, fstype, hfsplussupport, wilddir, wildfile, regexdir,
+ and regexfile thanks to Pruben Guldberg). See below for details.
+- Restore of all files for a Job or set of jobs even if the file
+ records have been removed from the catalog.
+- Restore of a directory (non-recursive, i.e. only one level).
+- Support for TLS (ssl) between all the daemon connections thanks
+ to Landon Fuller.
+- Any Volume in the Pool named Scratch may be reassigned to any
+ other Pool when a new Volume is needed.
+- You may clone a Job and thus write (almost) the same data
+ to multiple Volumes simultaneously (see below). Actually,
+ any Job may start any other Job with this mechanism, so it
+ also be used to group jobs.
+- Unicode filename support for Win32 (thanks to Thorsten Engel)
+- New manual format with an index (thanks to Karl Cunningham).
+- New Web site format (thanks to Michael Scherer).
+- Seeking on disk Volumes during restore.
New Directives:
-- Added "Rerun Failed levels = yes/no" in the Job resource
- of the Director. It will upgrade the current job to a
- higher level (Full or Differential) if a previous job
- of that level failed.
-- Added "Ignore FileSet Changes = yes/no" in the FileSet
- directive of the Director. It prevents the Director from
- immediately upgrading the job to a Full save if you modify
- the contents of the FileSet. Not recommended.
-- Added "Block positioning = yes/no" in Device resource in SD.
- If set to no, Bacula should (as yet untested) be able to
- recover data from tapes where the drive was set to fixed
- blocksize but Bacula is in variable block size.
-- Added "Multiple connections = yes/no" in Catalog record for
- allowing multiple simultaneous connections to the database.
- This is a major performance improvement for PostgreSQL and
- SQLite, but it is untested, so please test before putting
- it into production.
-- Alert Command in SD permits checking for tape drive
- alerts at the end of every job (or doing anything you want).
- An example of the command is in the default bacula-sd.conf
- file as well as in the Storage Configuration chapter of
- the manual.
+- New Run directive in Job resource of DIR. It permits
+ cloning of jobs. To clone a copy of the current job, use
+ Run = "job-name level=%l since=\"%s\""
+ Note, job-name is normally the same name as the job that
+ is running but there is no restriction on what you put. If you
+ want to start the job by hand and use job overrides such as
+ storage=xxx, realize that the job will be started with the
+ default storage values not the overrides. The level=%l guarantees
+ that the chosen level of the job is the same, and the since=...
+ ensures that the job uses *exactly* the same time/date for incremental
+ and differential jobs. The since=... is ignored when level=Full.
+ A cloned job will not start additional clones, so it is not possible
+ to recurse.
+- New Options keywords in a FileSet directive:
+ - WildDir xxx
+ Will do a wild card match against directories (files will not
+ be matched).
+ - WildFile xxx
+ Will do a wild card match against files (directories will not
+ be matched).
+ - RegexDir xxx
+ Will do a regular expression match against directories (files
+ will not be matched).
+ - RegexFile xxx
+ Will do a regular expression match against files( directories
+ will not be matched).
+ - IgnoreCase = yes | no
+ Will ignore case in wild card and regular expression matches.
+ This is handy for Windows where filename case is not significant.
+ - FsType = string
+ where string is a filesystem type: ext2, jfs, ntfs, proc,
+ reiserfs, xfs, usbdevfs, sysfs, smbfs, iso9660. For ext3
+ systems, use ext2. You may have multiple fstype directives
+ and thus permit multiple filesystem types. If the type
+ specified on the fstype directive does not match the
+ filesystem for a particular directive, that directory will
+ not be backed up. This directive can be used to prevent
+ backing up non-local filesystems.
+ - HFS Plus Support = yes | no
+ If set, Mac OS X resource forks will be saved and restored.
+- Label Type = ANSI | IBM | Bacula
+ Implemented in Director Pool resource and in SD Device resource.
+ If it is specified in the SD Device resource, it will take
+ precedence over the value passed from the Director to the SD.
+- Check Labels = yes | no
+ Implemented in the SD Device resource. If you intend to read
+ ANSI or IBM labels, this *must* be set. Even if the volume
+ is not ANSI labeled, you can set this to yes, and Bacula will
+ check the label type.
+- Scripts Directory = <directory> name. Defines the directory from
+ which Bacula scripts will be called for events. In fact, Bacula
+ appends this name to the standard Python list of search directories,
+ so the script could also be in any of the Python system directories.
+- In FileSet, you can exclude backing up of hardlinks (if you have
+ a lot, it can be very expensive), by using:
+ HardLinks = no
+ in the Options section. Patch supplied by David R Bosso. Thanks.
+- MaximumPartSize = bytes (SD, Device resource)
+ Defines the maximum part size.
+- Requires Mount = Yes/No (SD, Device resource)
+ Defines if the device require to be mounted to be read, and if it
+ must be written in a special way. If it set, the following directives
+ must be defined in the same Device resource:
+ + Mount Point = directory
+ Directory where the device must be mounted.
+ + Mount Command = name-string
+ Command that must be executed to mount the device. Before the command
+ is executed, %a is replaced with the Archive Device, and %m with the
+ Mount Point.
+ + Unmount Command = name-string
+ Command that must be executed to unmount the device. Before the
+ command is executed, %a is replaced with the Archive Device, and
+ %m with the Mount Point.
+ + Write Part Command = name-string
+ Command that must be executed to write a part to the device. Before
+ the command is executed, %a is replaced with the Archive Device, %m
+ with the Mount Point, %n with the current part number (0-based),
+ and %v with the current part filename.
+ + Free Space Command = name-string
+ Command that must be executed to check how much free space is left
+ on the device. Before the command is executed, %a is replaced with
+ the Archive Device, %m with the Mount Point, %n with the current part
+ number (0-based), and %v with the current part filename.
+- Write Part After Job = Yes/No (DIR, Job Resource, and Schedule Resource)
+ If this directive is set to yes (default no), a new part file will be
+ created after the job is finished.
New Commands:
-- umount -- same as unmount.
-- delete job now permits multiple jobids and ranges, e.g.:
- delete job jobid=1,3,5,11-16
-- reload -- reloads bacula-dir.conf in Director.
+- "python restart" restarts the Python interpreter. Rather brutal, make
+ sure no Python scripts are running. This permits you to change
+ a Python script and get Bacula to use the new script.
Items to note!!!
-- As of 1.35.5 you MUST do a database update.
-
- cd scripts-dir (or src/cats)
- ./update_bacula_tables
-
-- All daemons should be compatible with 1.34 with the exception
- of the new FileSet features such as regular expressions.
-- Regular expressions are not supported in the Win32 FD.
+- You must add --with-python=[DIR] to the configure command line
+ if you want Python support. Python 2.2 and 2.3 should be automatically
+ detected if in the standard place.
+- With Python 2.2 version, the link of the Director gets a few linker
+ warnings due to the fact that Python pulls in some old non-secure
+ libraries.
+- With Python 2.3, there are a few compiler warnings.
+- You must either create a new catalog database or upgrade your
+ old database (the PostgreSQL upgrade scripts not yet tested).
+- You must add --with-openssl to the configure command line if
+ you want TLS communications encryption support.
Other Items:
-- Much better error messages from system errors particularly
- on Win32 and in running scripts.
-- Many improvements in the SD.
-- Full support for 64 bit machines.
-- btape improved test and fill commands.
-- See the ChangeLog for additional details.
+- 2 new scripts, dvd-writepart and dvd-freespace, in the scripts directory,
+ which are designed to be used as parameters to Write Part Command and
+ Free Space Command. They need the dvd+rw-tools to be installed
+ (http://fy.chalmers.se/~appro/linux/DVD+RW/).
+- Part files support: File volumes can now be splitted in multiple
+ files, called "parts".
+- For the details of the Python scripting support, please see the new
+ Python Scripting chapter in the manual.
projects / bacula / bacula / blobdiff