- Release Notes for Bacula 1.38.11
-
- Bacula code: Total files = 423 Total lines = 139,479 (*.h *.c *.in)
-
-Warning for version 1.38.8 and greater:
-- The Windows FD no longer automatically folds the case
- in wild-card comparions. To get the same behavior as before,
- you must explicitly use "Ignore Case = yes" in your FileSet.
-- Backslashes are no longer permitted in File directives
- (typical error for Windows users), unless the string is
- enclosed in double quotes, in which case, the backslashes
- must be doubled.
-
-Major Changes for 1.38.11
-- Add test for IRIX64 as OS
-- Fix scheduler hang during clock shift (due to missing unlock())
-- Minor tweaks to bregex.c
-- Fix to block.c to correctly check for DVD number of parts.
-- Fix to dev.c to permit DVD seeking in spool file. Corrects
- label rewriting problems.
-- Clarify license for techlogs (GPL). I consider them "part" of
- the source code of Bacula.
-- Use FDL license for developer's manual, French translation, German
- translation, bimagemgr manuals (same as the main manual), and
- the web site.
-
-New features for 1.38.11:
-- None
-
-====================================================================
-
-Major Changes for 1.38.10:
-- This is a primarily a bug fix release, with the following bugs being
- resolved #570, 609, 611, 613, 614, 617 as well as other bugs not
- reported in the bugs database. See below for details.
-- The bconsole "reload" command should now work properly in virtually
- all situations thanks to the efforts of a number of people (Eric,
- Christopher, and myself).
-- There is an untested fix to eliminate the scheduling problems (either
- no job run or the same job run twice) during sudden clock shifts (daylight
- savings time change).
-- The manual has been released under the GNU Free Documentation License (FDL).
- The major difference is that this removes the prior restriction on
- commercial reproduction of the manual.
-- Fixed a race condition (thanks to Christopher) on dual processor machines
- that caused jobs to block when starting with the SD.
-
-New features for 1.38.10:
-- None
-
-Fixes for 1.38.10:
-08Jun06
-- Modify setting ACLs to suppress error message if the file is a
- symbolic link since the file linked to may not yet be created,
- and symbolic links really should not have attributes ...
-06Jun06
-- Complete implementation of acl.c error message during restore.
- During backups, errors getting acls are silently ignored, as was
- previously the case.
-04Jun06
-- Modify configure.in to check for typeof().
-- Better detection of postgresql installation if pg_conf works.
-- Fix RescheduleTimes = 0 bug (should not reschedule).
-- Down port from 1.39: fixes for reload, autochanger error messages,
- scheduler fixes for reload and day light savings change,
-01Jun06
-- Implement partial error messages for src/filed/acl.c
-- Fix return code to fail when doing update barcodes and
- Pool resource is not found. This previously caused Volumes
- to be labeled as cleaning tapes.
-- Small updates to projects file.
-26May06
-- Prevent DVD code from rewriting label if the device cannot be
- opened read/write.
-- Fix Dir/SD run race in migrate.c, verify.c, and restore.c
-- Update projects file.
-24May06
-- Applied patch posted by Jaime Ventura to bug #570 to correct failure
- of restarted jobs to complete (due to a destroyed pthreads conditional
- variable used by the message thread).
-- Fixed bug #619 where Bacula would not restart jobs with MaxRestartTimes
- set to zero.
-- Apply patch from John Goerzen bug #611 to fix bad manual links in the code.
-- Apply patch from Rudolf Cejka bug #614 to removed trailing
- colons in query.sql file.
-- Apply patch from Rudolf Cejka bug #613 to correct prunning of files
- not to create orphans.
-- Apply patch from Rudolf Cejka bug #617 to use mtime instead of ctime
- in restore long listing.
-- Apply patch from Rudolf Cejka bug #609 to use MarkId in verify.c instead
- of incorrect MarkedId.
-- Apply patch from adioso bug #616 to correct text in manual (replace
- Director with File daemon).
-21May06
-- Move DIR "run" command to SD before starting the message thread
- as suggested by Cristopher Hull to avoid a race deadlock from
- two threads using the bsock structure.
-- Modify LICENSE to correct some problems pointed out by Debian.
-05May06
-- Correct EOF with no \n lex.c problem.
-- Add additional INFO messages if autochanger cannot be used.
-- Add Eric Bollengier's lex error handler fix, which corrects most
- of the reload problems.
-
-
-New features for 1.38.9:
-- A "Dir Status" button in the Gnome console.
-
-Fixes:
-This is mainly a bug fix release containing a collection of
- minor fixes for 1.38.8.
-- Added code to strip backslashes from Windows filenames during
- a restore.
-- Corrected Win32 License to use the correct LICENSE file.
-- Corrected the buffer count and bytes reported in the heap
- statistics.
-- Fix a number of incorrect strings marked for translation, when
- they should not be (e.g. commands).
-- Fix StartTime bug reported for ClientRunBeforeJob and RunBeforeJob
- Patches supplied by user in bugs #608 and #599.
-- Use most recent of st_ctime and st_mtime in restore tree DIR
- listing. This fixes some problems with Win32 printing incorrect
- values.
-- Correct the clock shift comm time calculation between the DIR
- and the FD. It was added rather than subtracted.
-- Strip all backslashes in filenames to be restored on Win32
- machines -- the names should all be in Unix format, and if
- there are any backslashes it is most likely due to an improper
- FileSet definition, and the files will not otherwise be
- restorable.
-- Delete src/win32/License.txt
-- Modify installer to install LICENSE
-- Add back ua_label barcode fix from Rufolf Cejka.
-- Add 'Dir Status' button to the gnome console.
-- Display heap stats in Storage daemon without debug level.
-- Implement using pg_config for finding PostgreSQL files.
- Fixes bug #600. Patch supplied by user.
-- Remove -t option from mktemp in mtx_changer.in and use
- working directory. Fixes bug #578.
-- Update job start time after the any run before job so that
- files created by the script are only backed up once. Fixes
- bug #599.
-- Strip trailing newline only from filenames entered in
- the restore command when reading a file. This permits
- the user to enter filenames with trailing spaces. Fixes
- bug #549. The user supplied a patch that I modified slightly.
-- Use the most recent time (st_mtime, st_ctime) in the dir
- command in restore. This gives the user a better idea of what
- the newest file really is. This fixes bug #574. The fix
- was suggested by the user.
-- Remove the -f option from the chown in Makefile.in for more
- portability.
-- Change setting the group in Makefile.in to use chgrp for
- more portability.
-- Implement a Bacula read/write lock for Python rather
- than using the Python lock to avoid recursive problems.
-- Correct the uninstall directory names in filed/Makefile.in
- as reported by a user.
-
-
-New features for 1.38.8:
-- Regex, RegexFile, and RegexDir are now implemented in the
- Win32 FD. However, this is new experimental code that is
- largely untested. It may not work, it may cause memory
- leaks, or it may even crash the FD. Please test carefully
- before using.
-- On Linux/Unix systems there are two new programs, bregex
- and bwild that allow you to test regular expressions and
- wild-cards. These programs are installed with the other
- binaries. They are not available on Win32 systems.
-
-Fixes:
-- See below.
-
-New Features from pre-1.38.8 releases:
-- For autochanger get Scratch tape if in autochanger if
- no appendable Volumes are available.
-- New virtual disk autochanger. See scripts/disk-changer for
- documentation.
-- New optional Device resource directive in SD. 'Device Type =',
- which may have types: File, DVD, Tape, or FIFO. This can
- be useful for writing DVDs on FreeBSD where Bacula cannot
- correctly detect the DVD.
-- Faster restore tree building and uses less memory.
-- The command line keyword job (or jobname) now refers to the
- name of the job specified in the Job resource; jobid refers
- as before to the non-unique numeric jobid; and ujobid refers
- to the unique job identification that Bacula creates for each
- job.
-- The job report for Backups has a few more user friendly ways
- of displaying the information.
-- The wait command can now be made to wait for jobids.
-- New command line keywords are permitted in update volume. They
- are Inchanger=yes/no, slot=nn.
-- Add two new console commands: enable job=<job-name> and
- disable job=<job-name>. When a job is disabled, it will not
- be started by the scheduler. If you disable a job and restart
- Bacula or reload the .conf file, the job will be re-enabled.
-- Add a new Job resource directive "enable = yes|no".
-- There is a new program named regex in the tools directory that
- allows you to try regular expressions on your system.
-
-Major bug fixes:
-- Fix race condition in multiple-drive autochangers where
- both drives want the same Volume.
-- Do not allow opening default catalog for restricted console
- if it is not in ACL.
-- Writable FIFOs now work for restore.
-- ACLs are now checked in all dot commands.
-- Multiple drive autochangers and multiple different autochangers
- should now work correctly (no race conditions for Volume names,
- update slots use correct StorageId).
-- Fix bug where drive was always reserved if a restore job failed
- while in the reservation process.
-
-
-Minor bug fixes:
-- See below:
-
-Release 1.38.8 (14Apr06)
-14Apr06
-- Correct Makefile for Solaris /bin/sh
-- Correct mtx-changer.in for Solaris /bin/sh
-- Abort if a conf resource does not have a Name =
-12Apr06
-- Change the name of the regex program to bregex.
-- Add the bwild program to the tools directory. It is similar
- to the bregex program.
-- Implement create bregex.h and bregex.c in src/lib from the
- Python regexp program.
-- Use the new bregex.c to implement Regex expressions on Win32.
-11Apr06
-- Modify Makefile to change the permissions on Working Directory
- to 770 if the directory is created.
-- Do not fail the Makefile if changing the permissions or
- owner/group on WorkingDir fails.
-- Correct the old recycling algorithm so that Scratch Volumes
- are selected when looking for a Volume in the changer.
-- Correct a typo in the Verify SQL reported by Joe Park.
-10Apr06
-- Remove automatic case folding on Windows FDs. You must
- explictly use the 'Ignore Case = yes' option.
-- Remove the code added to 1.38.6 and 1.38.7 that pulls a
- scratch volume in an Autochanger early in the 'recycling'
- algorithm.
-08Apr06
-- Tweak license to include Microsoft restrictions.
-- Move mysql.reconnect to after real_connect(). Thanks to
- Frank Sweetser for the patch.
-- Disallow a backslash in a File = directive (Windows junk)
- unless the string is quoted.
-- Apply Eric's patch to ua_label.c so that daemon protocol
- is not translated.
-
-Release 1.38.7 (06Apr06) released 07Apr06
-06Apr06
-- Remove timed wait for VSS on Win2K3 as it is not yet
- implemented.
-- Correct bacula.in script to reference bacula-ctl-xx in the
- sysconfig directory rather than the bin directory.
-
-Release 1.38.6 (28Mar06) released 29Mar06
-28Mar06
-- Back port from 1.39 fixes to lib/jcr.c to use foreach_jcr()
- and new jcr chain locking.
-26Mar06
-- Fix a long standing bug in the bacula start/stop scripts.
-- Attempt to add the new bacula-ctl-* files to the rpm.
-- Switch to using typeof() for list traversing to avoid
- as many FC5 g++ compiler warnings as possible.
-25Mar06
-- Split the bacula start/start script into four files:
- bacula -- starts and stops calling other scripts
- bacula-ctl-dir -- starts/stops the director
- bacula-ctl-fd -- starts/stops the File daemon
- bacula-ctl-sd -- starts/stops the Storage daemon
-- Create datestyle fix for PostgreSQL. Fixes bug #574.
-- Correct editing of JobId from int to int64 in fd_cmds.c
-- Eliminate FileSet name race with bash_spaces() and multiple
- threads by bashing in a local.
-- Fix error return from 'use storage' to print a correct error
- message rather than nothing.
-- Correct false re-read last block error message when two jobs
- are simultaneously writing at the end of a tape.
-- Simplify exit conditions in the reserve.c code to avoid
- possible non-release of reservation_lock().
-- Suffle lock order in reserve to avoid deadlock between
- reservation lock and device mutex.
-- Add Thorsten's VSS timeout code to 1.38 branch.
-- Initialize jcr mutex before first use. Thanks to Thorsten for
- tracking this down for me !!!! as it broke the Win32 build.
-- Integrate addition of line count limitation to bsmtp -l from
- Sebastian Stark <stark at tuebingen.mpg.de>
-- Implement regex test program in tools directory.
-- Attempt to fix time problem with bsmtp with foreign langs.
-- Add strip_trailing_newline() submitted by user.
-
-Release 1.38.6 beta6 16Mar06
-- Fix bug #537 to allow arbitrary time to mount a volume for
- restore, if polling is turned on.
-- Disallow multiple storage specifications for a job. Should fix Arno's
- problem.
-- Add back a missing store of poolid in jr.poolid.
-- If dir_user or dir-group is specified in ./configure apply it to
- the working-dir. Fixes bug #533.
-- If rescheduling a job cancel the previous incarnation with the SD.
- Fixes bugs #566 and 557.
-- Fix bug #567 do_message() definition type conflict.
-
-Release 1.38.6 beta5 14Mar06
-- Add more jcr methods and make mutex and use_count private.
-- Create lock/unlock methods for jcr.
-- Fix PostgreSQL bug doing sql_data_seeek() by explicitly reading
- records to get to seek position.
-- Integrate patch from bug #561 to correct conio.c signal definitions.
-- Fix Rescheduling failed Jobs. Ensure that SD message thread
- terminates correctly by doing pthread_kill(). Do not destroy
- SD cond wait variable between executions of the job. Use local
- mutex for cond variable to avoid blocking jcr chain. Fix poor
- use of jcr use count in jobq.c for restarted jobs.
-- Fix obsolete usage of foreach_dlist() to use foreach_jcr() in
- lib/jcr.c -- prevents locking the jcr chaing.
-- Apply patch from bug #564, which corrects listing volumes with
- multiple autochangers. Apply same fix to next volume list.
-- Fix bug #562 where restore bootstrap file is not unique.
-- Use new routine lock_reservations() to lock the reservations
- system, and call it while looking for a volume in askdir.c.
- This could possibly fix bug #543.
-- Stop SD command loop if job is canceled.
-
-Release 1.38.6 beta3 4Mar06
-04Mar06
-- The po files should now be current.
-- Fix new sql_use_result() code to properly release the
- buffers in all cases.
-- Convert to using new Python class definitons with (object).
-- Use the keyword ujobid to mean the unique job id; job or jobname
- to mean the Job name given on the Name directive, and jobid to
- be the numeric (non-unique) job id.
-- Allow listing by any of the above.
-- Add the user friendly job report code for reporting job elapsed time
- and rates with suffexes.
-- Add Priority and JobLevel as Python settable items.
-- Use TEMPORARY table creation where the table is created by
- Bacula.
-- Add new code submitted by Eric for waiting on specific jobid.
-- Add ACL checking for the dot commands.
-- Fix restore of writable FIFOs.
-- Fix a bug in bpipe where the string was freed too early.
-
-26Feb06
-- Fix bug reported by Arno listing blocks with bls
-- Update the po files at Eric's request.
-
-Release 1.38.6-beta2 25Feb06
-25Feb06
-- Add sql_use_result() define.
-
-Changes to 1.38.6-beta1
-- Don't open default catalog if not in ACL.
-- Add virtual disk autochanger code.
-- Add user supplied bug fix to make two autochangers work
- correctly using StorageId with InChanger checks.
-- Correct new/old_jcr confusion in copy_storage().
-- Remove & from Job during scan in msgchan.c -- probably
- trashed the stack.
-- When getting the next Volume if no Volume in Append mode
- exists and we are dealing with an Autochanger, search
- for a Scratch Volume.
-- Check for missing value in dot commands -- bug fix.
-- Fix bug in update barcodes command line scanning.
-- Make sure Pool Max Vols is respected.
-- Check that user supplied a value before referencing
- it in restore -- pointed out by Karl Hakimian.
-- Add Karl Hakimian's table insert code.
-- Don't ask user to select a specific Volume when
- updating all volumes in a Pool.
-- Remove reservation if set for read when removing dcr.
-- Lock code that requests next appendable volume so that
- two jobs to get the same Volume at the same time.
-- Add new Device Type = xxx code. Values are file, tape,
- dvd, and fifo.
-- Preserve certain modes (ST_LABEL|ST_APPEND|ST_READ) across
- a re-open to change read/write permission on a device.
-- Correct a misplaced double quote in certain autochanger
- scripts.
-- Make make_catalog_backup.in a bit more portable.
-- Implement Karl Hakimian's sql_use_result(), which speeds
- up restore tree building and reduces the memory load.
-- Correct a number of minor bugs in getting a Volume from
- the Scratch Pool.
-- Implement additional command line options for update Volume.
-- Don't require user to enter a Volume name when updating
- all Volumes in a pool.
-
-Release 1.38.5 released 19Jan06:
-- Apply label barcodes fix supplied by Rudolf Cejka.
-- Modify standard rpm installation to set SD group to disk
- so that SD will by default have access to tape drives.
-- Allow users to specify user/group and start options
- for each daemon in /etc/sysconf/bacula file.
-
-Changes to 1.38.4 released 17Jan06:
-- The main changes are to the Director and the Storage daemon,
- thus there is no need to update your File daemons. Just the
- same, I do recommend running with the release 1.38.3 Win32
- FD or later.
-- Add two new queries to query.sql provided by Arno. One
- list volumes known to the Storage device, and the other
- lists volumes possibly needing replacement (error, ...).
-- Add periodic (every 24 hours) garbage collection of memory
- pool by releasing free buffers.
-- Correct bug counting sized (for display only) in smartall.c
-- Print FD mempool stats if debug > 0 rather than 5.
-- Correct bug in alist.c that re-allocated the list if the
- number of items goes to zero.
-- Move the reservation system thread locking to the top level
- so that one job at a time tries all possible drives before
- waiting.
-- Implement a reservation 'fail' message queue that is built
- and destroyed on each pass through the reservation system.
- These messages are displayed in a 'Jobs waiting to reserve
- a drive' list during a 'status storage='. Note, multiple
- messages will generally print for each JobId because they
- represent the different problems with either the same drive
- or different drives. If this output proves too confusing
- of voluminous, I will display it only when debug level 1
- or greater is enabled in the SD.
-- Add enable/disable job=<job-name>. This command prevents
- the specified job from being scheduled. Even when disabled,
- the job can be manually started from the console.
-- During 'update slots' clear all InChanger flags where the
- StorageId is zero (old Media records).
-- Fix autochanger code to strip leading spaces from returned
- slots number. Remove bc from chio-changer.
-- Back port a bit of 1.39 crypto code to reduce diffs.
-- Fix first call to autochanger that missed close()ing the
- drive. Put close() just before each run_program(). Fixes
- Arno's changer bug.
-- Add PoolId to Job record when updating it at job start time.
-- Pull in more code from 1.39 so that there are fewer file
- differences (the new ua_dotcmds.c, base64.h, crypto.h
- hmac.c jcr.c (dird and lib) lib.h md5.h parse_conf.c
- util.c. Aside from ua_dotcmds.c these are mostly crypto
- upgrades.
-- Implement new method of walking the jcr chain. The
- incr/dec of the use_count is done within the walking
- routines. This should prevent a jcr from being freed
- from under the walk routines.
-
-
-Changes to 1.38.3 released 05Jan06:
-- This is mainly a bug release fix. In addition, the multiple drive
- reservation algorithm has been rewritten.
-- In addition, the method of handling waiting for tapes to be
- mounted and the mount messages has been modified.
- (the above two items are a potential source of problems).
-- Simplify code in askdir.c that waits for creating an appendable
- volume so that it can handle multiple returns from the wait code.
-- Modify the wait code to permit multiple returns.
-- Return a zero when 'autochanger drives' is called and
- it is not an autochanger.
-- Make rewind_dev() a method taking a DCR as an argument.
- This permits closing and reopening the drive if the
- rewind fails as happens if the drive was loaded while the
- file descriptor was open. This refreshes the file descriptor.
-- Remove the ST_OPENED flag and always rely on fd < 0 for knowing
- if the device is open or not. This should eliminate
- Arnos problem.
-- Return error if reserve cannot find at least one suitable device.
-- Make wait_for_sysop() return correct state information.
-- Fix Win32 state file problem. write was not using compat
- code. This should fix bug #500.
-- Modify gui on command to set only GUI mode and not batch.
-- Modify .messages command to always print messages regardless
- of the mode.
-- If GUI mode is on, suppress automatic printing of
- You have messages.
-- Modify restore command in wx-console to set gui on and to use
- only .messages instead of messages. Hopefully this fixes bug
- #514.
-- Implement load balancing code with multiple drive autochangers.
-- Rewrite reservation algorithm again. Rename variables to be
- more logical, add HEARTBEAT with Director, allow cancel of
- jobs stuck in reservation, add last resourt any_drive.
-- Fix seg fault if user labels a drive directly bug #513
-- Remove quotes around Version as it breaks things.
-- Merge in Aleksandar Milivojevic's mods to the spec file.
-- Apply sparse code fix for raw drives and fifos. Bug 506
-- Thorsten fixed Unicode cd problem with wx-console bug 505.
-- Correct reservation system to do a last ditch try
- for any mounted volume, then anyone anywhere.
-- Updates to ssh-tunnel from Joshua Kugler.
-- Added a report.pl program from Jonas Bjorklund.
-- Simplify the O_NONBLOCK open() code for tape drives,
- and always open nonblocking.
-- Do not wait for open() if EIO returned (shouldn't happen).
-- Eliminate 3 argument to tape open().
-- Correct the slot # edited in the 3995 Bad autochanger unload
- message.
-- With -S on bscan (show progress) do not divide by zero.
-- Make cancel pthread_cond_signal() pthread_cond_broadcast().
-- When dcr is freed, also broadcast dev->wait_next_vol signal.
-- Remove unused code in wait_for_device.
-- Make wait_for_device() always return after 60 seconds of wait.
-- Use localhost if no network configured
-- Eliminated duplicate MaxVolBytes in cat update -- bug 509.
-- Update specs to include mysql4 define.
-- Return rec->FileIndex in dcr->VolLastIndex for normal
- and partial records in read_record(). This allows bscan
- to get FileIndex at EOT correct.
-- Fix butil.c to correctly set dcr -- fixes seg fault in bls.
-- Apply patch supplied by user (slightly modified) to fix
- correct detection of holes in block devices and FIFOs.
- Bug # 506.
-- Apply patch supplied by user (slightly modified)
- to fix SD hang with multiple pools and bad client
- IP. Fixes bug # 508.
-- Add nagios plugin to the examples directory. Submitted by
- Christian Masopust.
-- Remove warning message about multiple saves of hardlinked files
- from find_one.c as it can generate too many warning messages.
-- Reset timeout values before select() per patch from
- Frank Sweetser for problems with non-blocking sockets.
-- Unlink the state file if either reading or writing it gets
- errors. Hopefully this will fix Win32 exit problems.
-- Get next volume from Scratch pool before creating a volume.
-- Set new Pool defaults in Vol when moved from Scratch Pool.
-- Remove argument from create_bacula_database for SQLite as it
- caused an error.
-- Fix reservation so that mutexes are properly applied.
-- Rework reservation algorithm so that two drives can be used
- at the same time.
-- Apply days keyword patch from Alexander.Bergolth at wu-wien.ac.at
- If this patch is applied, the number of days can be specified with
- 'list nextvol days=xx'
- or
- 'status dir days=xx'
- My use case is to be able to preview the next scheduled job (and the
- next tape to be used) on fridays if there are no scheduled jobs during
- the weekend.
-- Fix font code in gnome2 console user patch. Fixes bug #501.
-- Fix malformatted bnet error message that caused seg fault
- fixes bug 502
-- Applied user patch to improve README.vc8 in src/win32.
-- Ensure that StorageId is stored in Media record when ever possible.
-- Remove old code from winservice.cpp
-- Break on error in scan.
-- Fix typo in signal.c
-- Separate read/write DCR in SD. Add jcr->read_dcr.
-- Cleanup how find_device() works.
-- Remove abs() in bfile.c so that it compiles on Solaris. Bug #491.
-
-Changes to 1.38.2:
-- Fix crash in tray-monitor when daemon disconnects. Bug #479.
-- Fix bnet-server bug found on OpenBSD. Bug #486
-- Fix cancel failure bug. Bug #481
-- Fix failure when Pool name has spaces. Bug #487
-- Fix SD crash in autochanger code. Mutex failure. Bug #488
-- Fix a couple of free()s in src/filed/acl.c
-- Fix memory overrun in bfile.c in building OS X resource
- fork filename. Bug #489
-- Add Pool name to SD status output.
-- Add Python install dir for Solaris to configure. Bug #492
-
-Changes to 1.38.1:
-- Corrected ACL for Solaris (David Duchscher and Attila Fulop).
-- Add bacula_mail_summary.sh to examples directory. It makes
- a single email summary of any number of jobs. Submitted
- by Adrew J. Millar.
-- Unmount command now unloads autochanger.
-- Fix hang in FD (Martin Simmons)
-- Fix Win98 stat() problem in FD (Thorsten Engel)
-- Fix update slots which did not clear missing tapes.
-- Fix autostart install for FreeBSD (user reported)
-- Fix several problems with PostgreSQL scripts (Eric Bollinger)
-- Critical: allow restore of the first file of non-portable Win32 backup.
-- Important: with muliple concurrent jobs the autochanger could get
- confused because of a missing mutex.
-- Fix accessing last slot in label and update slots.
-- Modify configure.in to add execute option to sqlite3 catalog
- scripts.
-- Create update_xxx_table_8_to_9 scripts for updatedb
-- Move the -lcrypt for PostgreSQL after the PostgreSQL libs in
- autoconf/bacula-macros/db.m4 as suggested by user. Fixes bug #457.
-- Remove @STATIC_CONS@ from tray-monitor Makefile as suggested
- by user. Fixes bug #456.
-- AMD64 users see compiler bug warning below!!!!!!!!!
-
-Major Changes in 1.38:
-- Fixed out of order Volumes in restore.
-- Improved algorithm for reserving drives in multiple drive
- autochangers. Autochange users MUST use the new Autochanger
- resource in the Storage daemon.
-- There is a new database format that is not compatible
- with previous databases. You must upgrade if converting
- from 1.36.x. No changes from version 1.37.30.
-- The Director, Storage daemon, and File daemons are
- Deamons are not compatible with prior versions.
- All FDs must be upgraded at the same time.
-- Support for ANSI/IBM labels.
-- Faster database inserts due to combining the MD5/SHA1 into
- the attributes record, eliminating one INSERT/file backed up.
-- Python Event support has been added. See below for
- configuration and details. The implementation is somewhat minimal,
- so the functionality is not complete. The Python interface
- has not been extensively tested, so please consider it BETA.
-- DVD writing support, using parts, and some new directives in
- the Device resource of the Storage configuration file thanks
- to Nicolas Boichat. Please note that this code is still
- BETA and should be carefully tested before using in
- production.
-- Seven new options keywords in a FileSet resource:
- ignorecase, fstype, hfsplussupport, wilddir, wildfile, regexdir,
- and regexfile thanks to Pruben Guldberg). See below for details.
-- Restore of all files for a Job or set of jobs even if the file
- records have been removed from the catalog.
-- Restore of a directory (non-recursive, i.e. only one level).
-- Support for TLS (ssl) between all the daemon connections thanks
- to Landon Fuller.
-- Any Volume in the Pool named Scratch may be reassigned to any
- other Pool when a new Volume is needed.
-- You may clone a Job and thus write (almost) the same data
- to multiple Volumes simultaneously (see below). Actually,
- any Job may start any other Job with this mechanism, so it
- also be used to group jobs.
-- Unicode filename support for Win32 (thanks to Thorsten Engel)
-- Volume Shadow Copy support for Win32 thus the capability to
- backup exclusively opened files (thanks to Thorsten Engel).
- A VSS enabled Win32 FD is available. You must explicitly
- turn on VSS with 'Enable VSS = yes' in your FileSet resource.
-- New manual format with an index (thanks to Karl Cunningham).
-- New Web site format (thanks to Michael Scherer).
-- SQLite3 support.
-- Web-bacula, previously a separate project by Juan Luis Frances,
- is now included in the Bacula GUI release. This is a management
- level tool for reporting the state of Bacula jobs.
-- The code is now Internationalized so that it can be localized
- in native languages. Thanks to Nicolas Boichat.
-
-New Directives:
-- New Job directive 'Prefer Mounted Volumes = yes|no' causes the
- SD to select either an Autochanger or a drive with a valid
- Volume already mounted in preference. If none is available,
- it will select the first available drive.
-- New Run directive in Job resource of DIR. It permits
- cloning of jobs. To clone a copy of the current job, use
- Run = 'job-name level=%l since=\'%s\''
- Note, job-name is normally the same name as the job that
- is running but there is no restriction on what you put. If you
- want to start the job by hand and use job overrides such as
- storage=xxx, realize that the job will be started with the
- default storage values not the overrides. The level=%l guarantees
- that the chosen level of the job is the same, and the since=...
- ensures that the job uses *exactly* the same time/date for incremental
- and differential jobs. The since=... is ignored when level=Full.
- A cloned job will not start additional clones, so it is not possible
- to recurse.
-- New Options keywords in a FileSet directive (backported to 1.36.3):
- - WildDir xxx
- Will do a wild card match against directories (files will not
- be matched).
- - WildFile xxx
- Will do a wild card match against files (directories will not
- be matched).
- - RegexDir xxx
- Will do a regular expression match against directories (files
- will not be matched).
- - RegexFile xxx
- Will do a regular expression match against files( directories
- will not be matched).
- - IgnoreCase = yes | no
- Will ignore case in wild card and regular expression matches.
- This is handy for Windows where filename case is not significant.
- - FsType = string
- where string is a filesystem type: ext2, jfs, ntfs, proc,
- reiserfs, xfs, usbdevfs, sysfs, smbfs, iso9660. For ext3
- systems, use ext2. You may have multiple fstype directives
- and thus permit multiple filesystem types. If the type
- specified on the fstype directive does not match the
- filesystem for a particular directive, that directory will
- not be backed up. This directive can be used to prevent
- backing up non-local filesystems.
- - HFS Plus Support = yes | no
- If set, Mac OS X resource forks will be saved and restored.
-- Label Type = ANSI | IBM | Bacula
- Implemented in Director Pool resource and in SD Device resource.
- If it is specified in the SD Device resource, it will take
- precedence over the value passed from the Director to the SD.
-- Check Labels = yes | no
- Implemented in the SD Device resource. If you intend to read
- ANSI or IBM labels, this *must* be set. Even if the volume
- is not ANSI labeled, you can set this to yes, and Bacula will
- check the label type.
-- Scripts Directory = <directory> name. Defines the directory from
- which Bacula scripts will be called for events. In fact, Bacula
- appends this name to the standard Python list of search directories,
- so the script could also be in any of the Python system directories.
-- In FileSet, you can exclude backing up of hardlinks (if you have
- a lot, it can be very expensive), by using:
- HardLinks = no
- in the Options section. Patch supplied by David R Bosso. Thanks.
-- MaximumPartSize = bytes (SD, Device resource)
- Defines the maximum part size.
-- Requires Mount = Yes/No (SD, Device resource)
- Defines if the device require to be mounted to be read, and if it
- must be written in a special way. If it set, the following directives
- must be defined in the same Device resource:
- + Mount Point = directory
- Directory where the device must be mounted.
- + Mount Command = name-string
- Command that must be executed to mount the device. Before the command
- is executed, %a is replaced with the Archive Device, and %m with the
- Mount Point.
- + Unmount Command = name-string
- Command that must be executed to unmount the device. Before the
- command is executed, %a is replaced with the Archive Device, and
- %m with the Mount Point.
- + Write Part Command = name-string
- Command that must be executed to write a part to the device. Before
- the command is executed, %a is replaced with the Archive Device, %m
- with the Mount Point, %n with the current part number (0-based),
- and %v with the current part filename.
- + Free Space Command = name-string
- Command that must be executed to check how much free space is left
- on the device. Before the command is executed, %a is replaced with
- the Archive Device, %m with the Mount Point, %n with the current part
- number (0-based), and %v with the current part filename.
-- Write Part After Job = Yes/No (DIR, Job Resource, and Schedule Resource)
- If this directive is set to yes (default no), a new part file will be
- created after the job is finished.
-- A pile of new Directives to support TLS. Please see the TLS chapter
- of the manual.
-
-New Commands:
-- 'python restart' restarts the Python interpreter. Rather brutal, make
- sure no Python scripts are running. This permits you to change
- a Python script and get Bacula to use the new script.
-
-New configure options:
-- --with-libintl-prefix for defining alternate locations for
- the NLS internationalization libraries. Not normally required.
-- --datadir for defining where the language files will be installed
- required only if you do not want the default /usr/share.
-
-Items to note!!!
-- The Storage daemon now keeps track of what tapes it is using
- (was not the case in 1.36.x). This means that you must be much
- more careful when removing tapes and putting up a new one. In
- general, you should always do a 'unmount' prior to removing a
- tape, and a 'mount' after putting a new one into the drive.
-- If you use an Autochanger, you MUST update your SD conf file
- to use the new Autochanger resource. Otherwise, certain commands
- such as 'update slots' may not work.
-- You must add --with-python=[DIR] to the configure command line
- if you want Python support. Python 2.2, 2.3 and 2.4 should be
- automatically detected if in the standard place.
-- When linking with --with-python, there are a few warnings that
- can be ignored.
-- You must either create a new catalog database or upgrade your
- old database. After installation, run from your scripts
- directory:
-
- ./upgrade_bacula_tables
-
- You can also find this script in the <bacula-source>/src/cats
- directory.
-- The Director, Storage daemon, and File daemons are
- Deamons are not compatible with prior versions.
- All FDs must be upgraded at the same time.
-- You must add --with-openssl to the configure command line if
- you want TLS communications encryption support.
-- Disk seeking during restores does not yet work correctly in
- all cases, so it is turned off.
-- Note, with gcc (GCC) 4.0.1 20050727 (Red Hat 4.0.1-5) on an
- AMD64 CPU running 64 bit CentOS4, there is a compiler bug that
- generates bad code that causes Bacula to segment fault.
- Typically you will see this in the Storage daemon first. The
- solution is to compile Bacula ensuring that no optimization is
- turned on (normally it is -O2).
- This same compiler bug has been reported and confirmed with
- gcc (GCC) 4.0.2 20050901 (prerelease) (SUSE Linux) running on
- an AMD64 CPU. This for the moment, I would recommend that all
- users of GCC 4.0.1 or greater turn off all optimization when
- compiling.
-
-
-Other Items Fixed:
-- Security fixes for temp files created in mtx-changer, during
- ./configure, and during making of Rescue disk.
-- A new script, dvd-handler, in the scripts directory,
- which is designed to be used as parameters to Write Part Command and
- Free Space Command. They need the dvd+rw-tools to be installed
- (http://fy.chalmers.se/~appro/linux/DVD+RW/) AND, the growisofs
- program must be patched using the
- <bacula-source>/patches/dvd+rw-tools-5.21.4.10.8.bacula.patch
- You must have Python installed to run the scripts.
-- Part files support: File volumes can now be split into multiple
- files, called 'parts'.
-- For the details of the Python scripting support, please see the new
- Python Scripting chapter in the manual.
-- The default user/group for the Director and Storage daemon installed
- by rpms is bacula/bacula, thus you may need to add additional permissions
- to your database, or modify the permissions of the tape drive. If
- all else fails, change to using user=root. However, it is more secure
- to use user=bacula.
+ Release Notes for Bacula 5.2.0
+
+ Bacula code: Total files = 1,088 Total lines = 219,172 (Using SLOCCount)
+
+General:
+--------
+
+This 5.2.0 version is a major release since the last version 5.0.3.
+It includes well over 50,000 lines of changes and a number of important
+new features:
+
+Compatibility:
+--------------
+ As always, both the Director and Storage daemon must be upgraded at
+ the same time.
+
+ Older 5.0.x and 3.0.x File Daemons are compatible with the 5.2.0
+ Director and Storage daemons. There should be no need to upgrade older File
+ Daemons.
+
+Changes and New Features:
+- Use of PostgreSQL cursor when doing large queries, should reduce the
+ memory usage during restore and accurate backups.
+- Includes better handling for Windows repares points, mount points, and
+ junction points.
+- A few path name length limits in Windows have been removed.
+- New SQL backend and ./configure that permits building multiple catalog
+ backends in one build, and has the main Bacula core code totally independent
+ of the SQL backend, which should simplify packaging (only the libbacsql.so/dll
+ needs to be changed.
+- New database format
+- Director selection option in bconsole
+- restorejob command in bconsole
+- Checkpoint of jobs so that in many cases they can be restarted
+- Maximum Bandwidth Per Job in several places
+- Disable batch insert config item
+- setbandwith command
+- limit command
+- Bacula Virtual File System for fast catalog access
+- New Pruning algoritm -- safer and faster
+- Additional security against injection of illegal characters
+- New block delta backup/restore
+- Indent lsmark during restore
+- Additional script variable editing
+- Improvements in ACL and xattr handling on additional platforms:
+ AIX, Darwind, FreeBSD, HPUX, IRIX, Solaris, Tru64
+- Many new plugin API features
+- Faster crc32 algorithm
+- Improved memory handling for restores
+- Improved hash table for hard links
+- Significant stability enhancements to bat
+- Many additional features for bat
+- Tray monitor for Windows
+- New FTP device handler for Storage daemon
+
+Bug fixes
+
+
+===========================================================================
+
+This 5.0.3 version is significant bug fix update to version 5.0.2.
+It includes new code and some new features.
+There is no database change since prior versions of 5.0.
+
+Note, if you are running 5.0.0, read the 5.0.1 and 5.0.2 release notes below in
+ the 5.0.1 release section.
+ Important!!!
+
+Compatibility:
+--------------
+ As always, both the Director and Storage daemon must be upgraded at
+ the same time.
+
+ Older 5.0.x and 3.0.x File Daemons are compatible with the 5.0.3
+ Director and Storage daemons. There should be no need to upgrade older File
+ Daemons.
+
+Changes and New Features:
+- If a VSS (Windows) snapshot fails, the whole Job is failed, previously
+ it printed a warning message and continued.
+- New editing codes %b = Job Bytes and %f = Job Files for runscripts
+- Any non-Bacula project plugins (i.e. third party plugins)
+ must be upgraded to specify AGPLv3 in place of the GPLv2 used previously
+ for the PLUGIN_LICENSE.
+- The bat Media page text columns can be sorted by clicking on the column.
+- If possible, the SD will automatically update the catalog Volume size if
+ it does not match the Volume size. The mismatch between the Volume sizes
+ typically occurs when the FD has a comm line drop or the FD crashes.
+
+
+Bug fixes
+1538 1554 1564 1567 1568 1569 1571 1577 1581 1582 1587 1594 1595 1606 1610
+
+- Change license from GPLv2 to AGPLv3
+- Make Win32 no filesystem change more explicit
+- Backport Branch-4.0 release to Branch-5.0
+- Massive backport from Branch-5.1 to Branch-5.0
+- Fix postgresql catalog creation when version is not on the first line
+- Fix bug #1610 handle empty xattr values on Linux and xBSD.
+- Garbage collect memory pool at end of job and before sm_dump
+- Add xattr seg fault protection suggested by Marco for bug #1610
+- Add archlinux to os.m4
+- More fixes for 32/64 bit problems in smartall
+- Fix 32/64 bit problem in smartalloc dump routine
+- Fix bad copy/paste in commit c88dccb88 prably a seg fault
+- Add .dump and .exit commands for daemons
+- Make SD automatically fix the Volume size in the Catalog when out of sync
+- Use Pmsg in smartall.c rather than printf for tracing Windows
+- Up maximum block size to 20M
+- Fix for TLS bugs #1568 and #1599
+- Improve comm line error handling for TLS, may fix bug #1568 and #1599
+- Fix problem when sending Cancel event to plugin
+- Convert all Jmsg on the watchdog thread to Qmsg
+- Fix SD crash due to mismatched lock/unlock in error condition
+- Fix bug #1587 if you have clients with different catalogs configured, both
+ catalogs contains all clients after a reload or restart of the dir
+- Fix bug #1577 During migration: ERROR in block.c:950 Failed ASSERT: dev->is_open()
+ by moving and commenting out the ASSERT()
+- Skip HB kill in FD if HB thread terminated
+- Fix crash from unequal volume_lock/unlock calls
+- New prunning algorithm -- should be more accurate
+- Save any dumps during regression to dumps directory
+- Fix crash from rw_lock/unlock miss match
+- Attempt to fix duplicate job kill seg fault
+- Replace pthread_kill by my_thread_send_signal() in jcr.c
+- fix #1595 about batch mode detection problem for postgresql with non standard
+ install dir
+- Fix #1594 about prune copy jobs
+- Apply literal string fix in printf submitted by Luca Berra
+- Fix bug #1582 Restore from multiple storage daemons breaks subsequent backups
+- Fix segfault on "cancel jobid=" command
+- Fix bug #1554 Windows installer doesn't honor /S flag
+- Remove pool zap code that breaks 2drive-concurrent-test
+- Fix #1571 and install libraries with 755 perms
+- Fix bug #1581 ASSERTs in src/dird/jobq.c can never trigger
+- Fix problem with BaseJob and Accurate FileSet options on client side
+- Fix for bug #1569 deadlock/crash in Dir
+- Fix segfault when loading Plugins
+- Fix #1567 about display of long volume names truncated during restore
+- Added new bacula-libs package.
+- Fix bug #1538 Start Scripts return incorrect value
+- Fix bug #1564 init scripts not LSB compliant
+
+See ChangeLog for more details.
+
+=============================================================================
+
+
+============= Release 5.0.2 ========================
+
+Changes since 5.0.1
+-------------------
+
+Bug fixes
+1502 1511 1517 1524 1527 1532 1536 1541 1549 1551 1553 1559 1560
+
+- Probable fix for SD crash bug #1553
+- Fix #1559 problem when restoring pruned jobs with a regexp
+- Fix for bug #1560 bcopy cannot find Volume
+- Fix cancel crash bug #1551
+- Check if sql backend is thread-safe
+- Correct Pool display in SD status. Fixes bug #1541
+- Fix cancel crash reported by Stephen Thompson
+- Rewind on close to fix #1549
+- Remove closelog() in bpipe fixes bug #1536
+- Fix #1517 about missing Base level in .level command
+- Replace ASSERT in block.c with fail Job
+- Fix database locking calling db_lock and returning from function without
+ calling db_unlock.
+- Add missing db_unlock to bvfs_update_cache.
+- Fix #1532 about permission on binaries
+- Fix #1527 about deadlock during migration
+- Another fix for OpenSSLv1
+- Add -lrt to Solaris links
+- Fix tls.c for OpenSSLv1
+- Fix #1511 when trying to insert more than 50.000 directories in bvfs
+- Fix plugin load not to stop if one plugin bad -- pointed out by James
+- Remove --without-qwt from configure statement.
+- Second correct fix to bug #1524 verify fails after adding or removing files
+- Fix bug #1524 verify fails after adding or removing files
+- Apply fix suggested by Andreas in bug #1502 for mediaview column sort problem
+- Fix OpenSSL 1.x problem in crypto.c on Fedora 12
+- Display AllowCompress warning message only if compression used in FileSet
+
+=============================================================================
+
+
+============= Release 5.0.1 ========================
+
+!!!!!!!!!!!!!!! NOTE FOR 5.0.0 USERS !!!!!!!!!!!!!!!!!!!!
+The Allow Duplicate Jobs directive has been significantly
+reworked, and the default value has changed. See below.
+
+Truncate On Purge has been totally rewritten. See the new
+features section of the manual.
+
+When Volume Poll Interval is set in the SD DEVICE configuration,
+(default 5 mins), after a certain number of polling tries (approx
+10) polling will stop and the operator will be asked to
+resolve the problem. Previously there was no limit, and an
+error message could be produced at each poll attempt.
+!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
+
+Changes since 5.0.0
+-------------------
+- We believe that we have resolved most of the problems
+ concerning canceled or failed jobs being "stuck" in the
+ Director. There is one outstanding problem in the SD when
+ canceling jobs that we will fix in the next major release.
+ If you see jobs that seem to be stuck, in general issuing
+ a cancel command in bconsole should now make them go away.
+
+Directives:
+- The default for "Allow Duplicate Jobs" has been changed from
+ no to yes. If you use this directive, please check your
+ conf file, and note the next two items !!!!!!!!!!!!!!!!!!!
+- AllowHigherDuplicates disabled. It did not work as documented
+ and was confusing.
+- New directive "CancelLowerLevelDuplicates" See New Features
+ section in the manual.
+- Truncate on Purge rewritten. See New Features section in the manual.
+
+Bug fixes:
+1448 1466 1467 1468 1476 1481 1486 1488 1494 1497
+1499 1501 1505 1509 1513
+
+- Ensure SD asks for help when looping even if poll set. Fixes bug #1513.
+- Fix three-pool regress bug
+- Modify bacula.spec fixes bug #1505
+- This version fixes an issue where the console window would start out
+ docked. It is fixed by initiating the variables in the Pages class wi
+ constructor.
+- Fix make_catalog_backup.pl fails when catalog db is on other host
+- Apply MacOSX installer patch from bug #1509
+- Apply fix to previous fix of Copy problem. Fix proposed by reporter o
+ #1476
+- Fix bug #1501 -t does not print errors
+- Apply SQLite3 update fix from bug #1497
+- Apply bashism fix for diskchanger.in script from bug #1499
+- Apply rpm fix for Sci Linux from bug #1494
+- Take most recent Ukranian po from bug #1448
+- Probable fix for Copy/Migration bug #1476
+- Fix bug #1488 -- avoid recursion and race conditions in messages.c
+- Upgrade cats library also to 5.0.0
+- Fix missing console page in bat
+- Add bat help files to Window install
+- Improve Windows upgrade to ensure old FD is shutdown
+- Fix bug #1481 -- bat consumes all console file descriptors
+- Backport truncate on purge from 5.1.x
+- Fix bug #1486 -- bat doesn't show any errors on command-line
+- Update the bsock error URL
+- Correct .my.cnf umask in make_catalog_backup.pl
+- Apply fix for dbcheck use by make_catalog_backup.pl
+- Fix seg fault in bscan from new comment field
+- Allow multiple CNs when using TLS
+- Fix seg fault in SQlite driver
+- Make shared libs version the same as the Bacula release version
+- Remove file_index sequential check
+- Fix #1466 about Bogus pruning message
+
+For Packagers:
+1. The default query.sql file is now, except for some comments, empty.
+The old file, which we no longer support (it is impossible or difficult to
+make it work on every backend, and the queries are mostly contributed) can
+be found in <bacula-source>/examples/sample-query.sql. The sample file is
+not installed by the Makefiles
+
+2. When you install the mtx-changer script, you must also install
+mtx-changer.conf if it does not exist. This new file (mtx-changer.conf) is
+required for mtx-changer to work, but it is a user configurable file, so on
+any update, any existing file should not be overwritten.
+
+3. Bat should be built on every platform that is capabable of running Qt.
+However, the Qt code is changing rather quickly and is not always
+compatible from version to version. We have built and verified bat on Qt
+4.3.4. We strongly recommend that you do not build and distribute bat with
+any other version of Qt unless you personally test it. To build against Qt
+4.3.4, download the depkgs-qt package from the Bacula Source Forge download
+location, read the README file and follow the instructions.
+
+If you are building for Bacula version 5.0.0, please ensure that you do not
+have qmake-qt4 loaded on your system. If you do, either remove it or
+rename it before trying to build bat. If you do not, bat will probably be
+built using the shared objects on your system. For Bacula 5.0.1 and later,
+this problem (bug) does not exist.
+
+depkgs-qt does not install Qt on your system, nor does it interfere with
+you having any other version of Qt installed on your system. Once you
+build bat with depkgs-qt, it should *not* use the Qt shared objects, but
+rather they will be linked into the program. After fully installing bat
+(make install), you can run "ldd bat" to see what shared objects it will
+use. If any Qt shared objects are referenced, something has gone wrong.
+
+4. Unless absolutely necessary, we recommend that you do not define any
+special library environment variables that apply to the ./configure -- for
+example: LIBDIR=/... ./configure <your-options> is strongly discouraged.
+Doing so, could potentially cause Bacula to be linked against the wrong
+shared objects.
+
+5. The Bacula project strongly recommends that you install Bacula into a
+single directory, with a few minor exceptions such as the MySQL or
+PostgreSQL databases. Preferrably this should be /opt/bacula. The full
+recommendation is:
+
+#!/bin/sh
+# Recommended configure script for Bacula
+prefix=/opt/bacula
+email=xxx@yyy.zz
+CFLAGS="-g -O2 -Wall" \
+ ./configure \
+ --sbindir=${prefix}/bin \
+ --sysconfdir=${prefix}/etc \
+ --docdir=${prefix}/html \
+ --htmldir=${prefix}/html \
+ --with-working-dir=${prefix}/working \
+ --with-pid-dir=${prefix}/working \
+ --with-subsys-dir=${prefix}/working \
+ --with-scriptdir=${prefix}/scripts \
+ --with-plugindir=${prefix}/plugins \
+ --libdir=${prefix}/lib \
+ --enable-smartalloc \
+ --enable-tray-monitor \
+ --enable-bat \
+ --with-mysql \
+ --with-dump-email=${email} \
+ --with-job-email=${email} \
+ --with-smtp-host=localhost \
+ --with-baseport=9101
+
+Obviously, the email, and some of the minor options (mysql, postgresql,
+...) can be changed to suit your distribution, but the directory names
+defined above are strongly recommended, and over time the default values in
+the bacula-dir.conf and bacula-sd.conf will reflect these choices.
+
+If you have any questions about this or would like a detailed document
+describing our recommendations including packaging requirements, please
+send an email to the bacula-devel list.
+
+6. Starting with Bacula version 3.0.0 up to Bacula 5.0.0, the shared
+libraries that Bacula uses by default are named xxx-1.0.0. Starting with
+Bacula 5.0.1, we are going to name the libraries using the Bacula version.
+So in Bacula 5.0.1, the libraries will be named xxx-5.0.1. With future
+versions, the last digit may or may not change when we distribute patch
+updates (i.e. the last digit of the version changes). This will depend on
+whether or not we have changed something in the library. Hopefully this
+new procedure will resolve some of the incompatibility problems between
+different versions of the shared objects.
+
+7. The default build option for bconsole is conio (my own little console
+routines). I did this because some years ago, readline was very difficult
+to maintain -- it and where it was found seemed to change on every release.
+This generated at the time a number of support problems. It seems to me
+that since then there have been very few problems with readline. As a
+consequence, I have no problem if you want to make bconsole with readline
+enabled. It will actually give some very nice new bconsole command
+completion functionality that Eric has written. Bottom line: feel free to
+use readline or not as you please.
+
+==========================================================
+
+
+
+Release Notes for Bacula 5.0.0
+
+Release Numbering:
+-----------------------------------------------------------
+You might be wondering why this release jumps from 3.0.x to
+5.0.0 thus skipping version 4.0.0. We have done this for
+several reasons: first, we wanted a way of distinguishing
+the numbering system for the Bacula System Enterprise version
+and the Bacula Project version. So, to do so, we have decided
+that the first number of the Bacula Project version will always
+be odd, and the first number of the Enterprise version will always
+be even. Thus the Bacula Project now moves from 3.0.x to 5.0.x.
+In addition, we want to keep the Bacula Project version larger
+than the Enterprise version to indicate that the Bacula Project
+version is more advanced or has more features than the
+Enterprise version. For memory, the current Enterprise version
+is 2.6.1, and the next release (in a few months -- before June 2010)
+will be version 4.0.0.
+
+Warning:
+--------------------------------------------------------------
+Please note the three Warnings below before doing any install or
+upgrade.
+
+
+Changes since 3.0.3a (the last Bacula Project release):
+-------------------------------------------------------
+
+Bug fixes:
+1337 1351 1352 1354 1357 1361 1367 1369 1370 1373
+1376 1391 1403 1409 1420 1422 1427 1428 1431 1450
+1454 1455 1458 1456
+
+Fixed:
+ - Problem that locks the Director when the SMTP server wasn't
+ responding to the bsmtp program
+ - Restore's dir command shows incorrect file sizes
+ - Fix various problems with the reload command
+ - Fix problems with conio
+ - Eliminate several deadlocks or potential race conditions from SD
+
+Enhancements:
+ - Project 5: Truncate volume after purge
+ - Project 6: File Deduplication using Base Jobs
+ - Project 10: Restore from Multiple Storage Daemons
+ - Project 11: AllowCompression per Device
+ - Project 23: Add Maximum Concurent Jobs for Devices to balance load
+ between drives
+ - Add Accurate Fileset Options to configure accurate detection. Can use
+ checksum verification for example.
+ - Allow FD to keep root read but drop write permission (CAP)
+ - Secure handling of passwords for catalog backup
+ - Add Tab-completion for Bconsole when using Readline
+ - Add Bvfs API to query the catalog without building a memory tree
+ - Add new speed test to btape program
+ - Add new Bat screens (Autochanger content, Job view, Media view, ...)
+ - Windows version of Bat
+ - Added Spanish Bacula translation
+ - New bconsole -u nnn option to have timeout on commands
+ - Allow Migrate, Copy, and Virtual Full to read and write
+ to the same Pool
+ - show disabled -- shows disabled Jobs
+ - Add Pool File and Job retention periods (take precedence over Client)
+ - Many ACL improvements
+ - Level added to FD status Job entry
+ - Allow turning on/off Block Checksum per device
+ - Set Device Poll interval to 5 minutes -- previously did not poll
+ - Implement lock manager with bad order protection
+
+Compatibility:
+As always, both the Director and Storage daemon must be upgraded at
+the same time, and on any given machine, you must run only one version
+of Bacula. This means that on the Director and Storage daemon machines,
+you *must* upgrade your File daemon as well.
+
+Older 3.0.x and possibly 2.4.x File Daemons are compatible with the 5.0.0
+Director and Storage daemons. There should be no need to upgrade older File
+Daemons immediately. However, we recommend that you do so as soon
+as is reasonable for your situation.
+
+================== Warning !!!!!! ==========================
+
+New Catalog format in version 5.0.0 (3.1.9 or later)
+-----------------------------------------------------
+
+This release of Bacula uses a new catalog format. We provide a set of
+scripts that permit to convert a 3.0.x (version 11) catalog to 5.0.0 (version
+12). The Bacula project rpms distributed on Source Forge will automatically
+detect the database change and do the upgrade for you. We strongly
+recommend that you save a copy of your existing database before upgrading
+using rpms.
+
+The simplest way to upgrade the database assuming you are building from
+source:
+1. Stop any current version of Bacula from running.
+2. Save a copy of your existing database.
+3. Configure, build, and install the 5.0.0 version of Bacula
+ Note the new ./configure options in the manuals see the link
+ at the bottom of this file.
+4. cd <your-scripts-installation-directory>
+5. ./update_bacula_tables
+6. If you have multiple catalogs, edit the update_bacula_tables
+ script and put the name of another database, and then
+ execute the script again. Repeat this until all Bacula
+ catalogs have been updated.
+7. Start the new Bacula. If everything worked, it should
+ not print any error messages.
+
+If you start from scratch, you don't need to run the update_bacula_tables
+script because the create_bacula_tables script automatically creates the new
+table format. However, if you are using a version of Bacula older than 3.1.9
+(e.g. 3.0.3) then you need to run the update_bacula_tables script that will
+be found in the <bacula>/src/cats directory after you run the ./configure
+command. As mentioned above, before running this script, please backup your
+catalog database, and when you do running it, be sure shutdown Bacula and be
+aware that running the script can take some time depending on your database
+size.
+================================================================
+
+
+================== Warning !!!!!! ==========================
+If you upgrade a previous Win32 client installation, you must
+first stop the File daemon, then uninstall it before attempting
+the upgrade. If you do not do so, the upgrade will probably
+fail and you will need to manually find and run the
+Uninstall.exe file, before you can upgrade to the new version.
+This is because the file locations are different. If you want
+to save your previous bacula-fd.conf file, please do so before
+uninstalling it.
+================================================================
+
+================== Warning !!!!!! ==========================
+Due to permissions problems on Windows Vista and later systems,
+we no longer require SYSTEM or Administrator permissions to
+access the binaries and configuation files. If you wish
+to restrict access to these files, please see the New Features
+section of the manual for how to set access control lists.
+================================================================
+
+Note, the Win32 Installer no longer installs the Bacula Servers
+(Director and Storage daemon). See the New Features section of
+the manual for more details.
+
+============ Documentation improvements needed ==================
+
+Note!!!!! The 5.0.0+ documentation has a number of known problems:
+
+1. We have reduced the number of manuals, which has fixed many
+ of the broken links found in the old 3.0.x version, but there
+ are still some that need fixing.
+
+2. Integration of the 3.0.x features into the main manuals has
+ not yet been done.
+
+The documentation will not be completed in the near future due to lack
+manpower. If you are unhappy with this situation as we are, we suggest
+you help by submitting patches to the documentation. Thanks.
+=====
+
+
+This release includes large number of new features and changes.
+It should be more or less compatible with previous xx.conf files
+and File daemons providing that you are not using any of the new
+features.
+
+Please see the New Features chapter of the new manual, which documents
+some but not all the new features (we are still working on it):
+
+http://www.bacula.org/5.0.x-manuals/en/main/main/New_Features_in_5_0_1.html
+
+The ChangeLog has more details.