- Release Notes for Bacula 1.37.3
-
- Bacula code: Total files = 411 Total lines = 122,189 (*.h *.c *.in)
-
-
-Major Changes:
-- This version has a new database format that is not compatible
- with previous databases. The upgrade scripts should work, but
- they are not yet tested.
-- SQLite3 support, but it seems to run at 1/2 to 1/4 the speed of
- SQLite2.
-- First cut at ANSI labels.
-- New communications protocol between DIR and SD to reserve
- drives. The DIR and SD are no longer compatible with 1.36 or
- lower versions.
-- Preliminary Python Event support has been added. See below for
- configuration and details.
-- DVD writing support, using parts, and a lot of new directives in
- the Device resource of the Storage configuration file.
-- Seven new options keywords in a FileSet resource:
- ignorecase, fstype, hfsplussupport, wilddir, wildfile, regexdir,
- and regexfile. See below for details.
-
-New Directives:
-- New Options keywords in a FileSet directive:
- - WildDir xxx
- Will do a wild card match against directories (files will not
- be matched).
- - WildFile xxx
- Will do a wild card match against files (directories will not
- be matched).
- - RegexDir xxx
- Will do a regular expression match against directories (files
- will not be matched).
- - RegexFile xxx
- Will do a regular expression match against files( directories
- will not be matched).
- - IgnoreCase = yes | no
- Will ignore case in wild card and regular expression matches.
- This is handy for Windows where filename case is not significant.
- - FsType = string
- where string is a filesystem type: ext2, jfs, ntfs, proc,
- reiserfs, xfs, usbdevfs, sysfs, smbfs, iso9660. For ext3
- systems, use ext2. You may have multiple fstype directives
- and thus permit multiple filesystem types. If the type
- specified on the fstype directive does not match the
- filesystem for a particular directive, that directory will
- not be backed up. This directive can be used to prevent
- backing up non-local filesystems.
- - HFS Plus Support = yes | no
- If set, Mac OS X resource forks will be saved and restored.
-- Label Type = ANSI | IBM | Bacula
- Implemented in Director Pool resource and in SD Device resource.
- If it is specified in the SD Device resource, it will take
- precedence over the value passed from the Director to the SD.
- IBM is not yet implemented.
-- Check Labels = yes | no
- Implemented in the SD Device resource. If you intend to read
- ANSI or IBM labels, this *must* be set. Even if the volume
- is not ANSI labeled, you can set this to yes, and Bacula will
- check the label type.
-- Scripts Directory = <directory> name. Defines the directory from
- which Bacula scripts will be called for events. In fact, Bacula
- appends this name to the standard Python list of search directories,
- so the script could also be in any of the Python system directories.
-- In FileSet, you can exclude backing up of hardlinks (if you have
- a lot, it can be very expensive), by using:
- HardLinks = no
- in the Options section. Patch supplied by David R Bosso. Thanks.
-- MaximumPartSize = bytes (SD, Device resource)
- Defines the maximum part size.
-- Requires Mount = Yes/No (SD, Device resource)
- Defines if the device require to be mounted to be read, and if it
- must be written in a special way. If it set, the following directives
- must be defined in the same Device resource:
- + Mount Point = directory
- Directory where the device must be mounted.
- + Mount Command = name-string
- Command that must be executed to mount the device. Before the command
- is executed, %a is replaced with the Archive Device, and %m with the
- Mount Point.
- + Unmount Command = name-string
- Command that must be executed to unmount the device. Before the
- command is executed, %a is replaced with the Archive Device, and
- %m with the Mount Point.
- + Write Part Command = name-string
- Command that must be executed to write a part to the device. Before
- the command is executed, %a is replaced with the Archive Device, %m
- with the Mount Point, %n with the current part number (0-based),
- and %v with the current part filename.
- + Free Space Command = name-string
- Command that must be executed to check how much free space is left
- on the device. Before the command is executed, %a is replaced with
- the Archive Device, %m with the Mount Point, %n with the current part
- number (0-based), and %v with the current part filename.
-- Write Part After Job = Yes/No (DIR, Job Resource, and Schedule Resource)
- If this directive is set to yes (default no), a new part file will be
- created after the job is finished.
-
-New Commands:
-- "python restart" restarts the Python interpreter. Rather brutal, make
- sure no Python scripts are running. This permits you to change
- a Python script and get Bacula to use the new script.
-
-Items to note!!!
-- You must add --with-python=[DIR] to the configure command line
- if you want Python support. Python 2.2 and 2.3 should be automatically
- detected if in the standard place.
-- With Python 2.2 version, the link of the Director gets a few linker
- warnings due to the fact that Python pulls in some old non-secure
- libraries.
-- With Python 2.3, there are a few compiler warnings.
-- You must either create a new catalog database or upgrade your
- old database (upgrade scripts not yet tested).
-
-Other Items:
-- 2 new scripts, dvd-writepart and dvd-freespace, in the scripts directory,
- which are designed to be used as parameters to Write Part Command and
- Free Space Command. They need the dvd+rw-tools to be installed
- (http://fy.chalmers.se/~appro/linux/DVD+RW/).
-- Part files support: File volumes can now be splitted in multiple
- files, called "parts".
-- Python scripting support:
- A Python script will be called at particular points or conditions
- in Bacula called Events. The currently defined Events are called:
-
- StartJob, EndJob, NewVolume
-
- Where StartJob is called before the RunBeforeJob, EndJob is called
- after RunAfterJob, and NewVolume, is called before all other
- "methods" of obtaining a new Volume name, when one is needed.
-
- The Python script of the same name as the Event name (but with a .py)
- is called from the Scripts Directory (a directive defined in the
- Director resource). Note, both the Filename, and the name of
- the function in the file must correspond to the Event name.
-
- Once the Python script gets control, it can have access to Bacula
- variables by doing:
-
- import bacula
-
- The script is called with one argument, typically called j. This
- argument *must* be passed unchanged to each bacula function. The
- format of the call is slightly different for reading Bacula
- variable and for writing bacula variables. See below.
-
- Bacula variables can be read with:
-
- bacula.get(j, "Variable-name")
-
- where j is the argument passed to the function, and Variable-name
- is on of the following:
-
- JobId, Client, Pool, Storage, Catalog, MediaType, NumVols, DirName,
- Level, Type, Job, JobName, JobStatus
-
- Bacula varibles can be set using Python keyword arguments:
-
- bacula.set(jcr=j, VolumeName="xyz")
-
- The two currently implemented writable "variables" are:
-
- VolumeName and JobReport
-
- It is possible to submit a Bacula run command with the following:
-
- bacula.run(j, "run kernsave client=Matou storage=File")
-
- this function returns the JobId of the job that was started. If
- there is an error, the return value is zero.
-
- Example:
-
-== File EndJob.py ===
-import bacula
-
-def EndJob(j):
- jobid = bacula.get(j, "JobId")
- client = bacula.get(j, "Client")
- bacula.set(jcr=j, JobReport="EndJob output: JobId=%d Client=%s.\n" % (jobid, client))
- if (jobid < 5) :
- startid = bacula.run(j, "run kernsave")
- print "Python started jobid=", startid
-
- return 1
-====
-
-== File NewVolume.py ===
-import bacula
-
-def NewVolume(j):
- jobid = bacula.get(j, "JobId")
- print "JobId=", jobid
- client = bacula.get(j, "Client")
- print "Client=" + client
- numvol = bacula.get(j, "NumVols");
- print "NumVols=", numvol
- bacula.set(jcr=j, JobReport="New Volume set for Job.\n")
- bacula.set(jcr=j, VolumeName="TestA-001")
- return 1
-====
-
-
+ Release Notes for Bacula 2.2.0
+
+ Bacula code: Total files = 438 Total lines = 154,329 (*.h *.c *.in)
+
+The major features are:
+- First cut of bat (Bacula Administration Tool)
+- Red/Black restore in memory tree (500 times faster loading).
+- Much faster insertion of attributes (somewhere around 10 times).
+- The Regex Where code to allow easier relocation of restored files.
+- Socket level heartbeat (untested).
+- posix_fadvise() use in the FD to improve performance.
+- Simpler locking in the SD in the reservation system.
+- Much improved Volume reservation code that should eliminate most
+ conflicts experienced in multiple drive autochangers.
+- Detection of file size/date change during backup if enabled.
+- New Recycle Pool feature.
+- Efficient implementation of very large include/exclude lists.