- Release Notes for Bacula 1.38.3
-
- Bacula code: Total files = 424 Total lines = 140,955 (*.h *.c *.in)
- 20,440 additional lines of code since version 1.36.3
-
-Changes to 1.38.3:
-- This is mainly a bug release fix. In addition, the multiple drive
- reservation algorithm has been rewritten.
-- In addition, the method of handling waiting for tapes to be
- mounted and the mount messages has been modified.
- (the above two items are a potential source of problems).
-- Simplify code in askdir.c that waits for creating an appendable
- volume so that it can handle multiple returns from the wait code.
-- Modify the wait code to permit multiple returns.
-- Return a zero when "autochanger drives" is called and
- it is not an autochanger.
-- Make rewind_dev() a method taking a DCR as an argument.
- This permits closing and reopening the drive if the
- rewind fails as happens if the drive was loaded while the
- file descriptor was open. This refreshes the file descriptor.
-- Remove the ST_OPENED flag and always rely on fd < 0 for knowing
- if the device is open or not. This should eliminate
- Arnos problem.
-- Return error if reserve cannot find at least one suitable device.
-- Make wait_for_sysop() return correct state information.
-- Fix Win32 state file problem. write was not using compat
- code. This should fix bug #500.
-- Modify gui on command to set only GUI mode and not batch.
-- Modify .messages command to always print messages regardless
- of the mode.
-- If GUI mode is on, suppress automatic printing of
- You have messages.
-- Modify restore command in wx-console to set gui on and to use
- only .messages instead of messages. Hopefully this fixes bug
- #514.
-- Implement load balancing code with multiple drive autochangers.
-- Rewrite reservation algorithm again. Rename variables to be
- more logical, add HEARTBEAT with Director, allow cancel of
- jobs stuck in reservation, add last resourt any_drive.
-- Fix seg fault if user labels a drive directly bug #513
-- Remove quotes around Version as it breaks things.
-- Merge in Aleksandar Milivojevic's mods to the spec file.
-- Apply sparse code fix for raw drives and fifos. Bug 506
-- Thorsten fixed Unicode cd problem with wx-console bug 505.
-- Correct reservation system to do a last ditch try
- for any mounted volume, then anyone anywhere.
-- Updates to ssh-tunnel from Joshua Kugler.
-- Added a report.pl program from Jonas Bjorklund.
-- Simplify the O_NONBLOCK open() code for tape drives,
- and always open nonblocking.
-- Do not wait for open() if EIO returned (shouldn't happen).
-- Eliminate 3 argument to tape open().
-- Correct the slot # edited in the 3995 Bad autochanger unload
- message.
-- With -S on bscan (show progress) do not divide by zero.
-- Make cancel pthread_cond_signal() pthread_cond_broadcast().
-- When dcr is freed, also broadcast dev->wait_next_vol signal.
-- Remove unused code in wait_for_device.
-- Make wait_for_device() always return after 60 seconds of wait.
-- Use localhost if no network configured
-- Eliminated duplicate MaxVolBytes in cat update -- bug 509.
-- Update specs to include mysql4 define.
-- Return rec->FileIndex in dcr->VolLastIndex for normal
- and partial records in read_record(). This allows bscan
- to get FileIndex at EOT correct.
-- Fix butil.c to correctly set dcr -- fixes seg fault in bls.
-- Apply patch supplied by user (slightly modified) to fix
- correct detection of holes in block devices and FIFOs.
- Bug # 506.
-- Apply patch supplied by user (slightly modified)
- to fix SD hang with multiple pools and bad client
- IP. Fixes bug # 508.
-- Add nagios plugin to the examples directory. Submitted by
- Christian Masopust.
-- Remove warning message about multiple saves of hardlinked files
- from find_one.c as it can generate too many warning messages.
-- Reset timeout values before select() per patch from
- Frank Sweetser for problems with non-blocking sockets.
-- Unlink the state file if either reading or writing it gets
- errors. Hopefully this will fix Win32 exit problems.
-- Get next volume from Scratch pool before creating a volume.
-- Set new Pool defaults in Vol when moved from Scratch Pool.
-- Remove argument from create_bacula_database for SQLite as it
- caused an error.
-- Fix reservation so that mutexes are properly applied.
-- Rework reservation algorithm so that two drives can be used
- at the same time.
-- Apply days keyword patch from Alexander.Bergolth at wu-wien.ac.at
- If this patch is applied, the number of days can be specified with
- "list nextvol days=xx"
- or
- "status dir days=xx"
- My use case is to be able to preview the next scheduled job (and the
- next tape to be used) on fridays if there are no scheduled jobs during
- the weekend.
-- Fix font code in gnome2 console user patch. Fixes bug #501.
-- Fix malformatted bnet error message that caused seg fault
- fixes bug 502
-- Applied user patch to improve README.vc8 in src/win32.
-- Ensure that StorageId is stored in Media record when ever possible.
-- Remove old code from winservice.cpp
-- Break on error in scan.
-- Fix typo in signal.c
-- Separate read/write DCR in SD. Add jcr->read_dcr.
-- Cleanup how find_device() works.
-- Remove abs() in bfile.c so that it compiles on Solaris. Bug #491.
-
-Changes to 1.38.2:
-- Fix crash in tray-monitor when daemon disconnects. Bug #479.
-- Fix bnet-server bug found on OpenBSD. Bug #486
-- Fix cancel failure bug. Bug #481
-- Fix failure when Pool name has spaces. Bug #487
-- Fix SD crash in autochanger code. Mutex failure. Bug #488
-- Fix a couple of free()s in src/filed/acl.c
-- Fix memory overrun in bfile.c in building OS X resource
- fork filename. Bug #489
-- Add Pool name to SD status output.
-- Add Python install dir for Solaris to configure. Bug #492
-
-Changes to 1.38.1:
-- Corrected ACL for Solaris (David Duchscher and Attila Fulop).
-- Add bacula_mail_summary.sh to examples directory. It makes
- a single email summary of any number of jobs. Submitted
- by Adrew J. Millar.
-- Unmount command now unloads autochanger.
-- Fix hang in FD (Martin Simmons)
-- Fix Win98 stat() problem in FD (Thorsten Engel)
-- Fix update slots which did not clear missing tapes.
-- Fix autostart install for FreeBSD (user reported)
-- Fix several problems with PostgreSQL scripts (Eric Bollinger)
-- Critical: allow restore of the first file of non-portable Win32 backup.
-- Important: with muliple concurrent jobs the autochanger could get
- confused because of a missing mutex.
-- Fix accessing last slot in label and update slots.
-- Modify configure.in to add execute option to sqlite3 catalog
- scripts.
-- Create update_xxx_table_8_to_9 scripts for updatedb
-- Move the -lcrypt for PostgreSQL after the PostgreSQL libs in
- autoconf/bacula-macros/db.m4 as suggested by user. Fixes bug #457.
-- Remove @STATIC_CONS@ from tray-monitor Makefile as suggested
- by user. Fixes bug #456.
-- AMD64 users see compiler bug warning below!!!!!!!!!
-
-Major Changes in 1.38:
-- Fixed out of order Volumes in restore.
-- Improved algorithm for reserving drives in multiple drive
- autochangers. Autochange users MUST use the new Autochanger
- resource in the Storage daemon.
-- There is a new database format that is not compatible
- with previous databases. You must upgrade if converting
- from 1.36.x. No changes from version 1.37.30.
-- The Director, Storage daemon, and File daemons are
- Deamons are not compatible with prior versions.
- All FDs must be upgraded at the same time.
-- Support for ANSI/IBM labels.
-- Faster database inserts due to combining the MD5/SHA1 into
- the attributes record, eliminating one INSERT/file backed up.
-- Python Event support has been added. See below for
- configuration and details. The implementation is somewhat minimal,
- so the functionality is not complete. The Python interface
- has not been extensively tested, so please consider it BETA.
-- DVD writing support, using parts, and some new directives in
- the Device resource of the Storage configuration file thanks
- to Nicolas Boichat. Please note that this code is still
- BETA and should be carefully tested before using in
- production.
-- Seven new options keywords in a FileSet resource:
- ignorecase, fstype, hfsplussupport, wilddir, wildfile, regexdir,
- and regexfile thanks to Pruben Guldberg). See below for details.
-- Restore of all files for a Job or set of jobs even if the file
- records have been removed from the catalog.
-- Restore of a directory (non-recursive, i.e. only one level).
-- Support for TLS (ssl) between all the daemon connections thanks
- to Landon Fuller.
-- Any Volume in the Pool named Scratch may be reassigned to any
- other Pool when a new Volume is needed.
-- You may clone a Job and thus write (almost) the same data
- to multiple Volumes simultaneously (see below). Actually,
- any Job may start any other Job with this mechanism, so it
- also be used to group jobs.
-- Unicode filename support for Win32 (thanks to Thorsten Engel)
-- Volume Shadow Copy support for Win32 thus the capability to
- backup exclusively opened files (thanks to Thorsten Engel).
- A VSS enabled Win32 FD is available. You must explicitly
- turn on VSS with "Enable VSS = yes" in your FileSet resource.
-- New manual format with an index (thanks to Karl Cunningham).
-- New Web site format (thanks to Michael Scherer).
-- SQLite3 support.
-- Web-bacula, previously a separate project by Juan Luis Frances,
- is now included in the Bacula GUI release. This is a management
- level tool for reporting the state of Bacula jobs.
-- The code is now Internationalized so that it can be localized
- in native languages. Thanks to Nicolas Boichat.
-
-New Directives:
-- New Job directive "Prefer Mounted Volumes = yes|no" causes the
- SD to select either an Autochanger or a drive with a valid
- Volume already mounted in preference. If none is available,
- it will select the first available drive.
-- New Run directive in Job resource of DIR. It permits
- cloning of jobs. To clone a copy of the current job, use
- Run = "job-name level=%l since=\"%s\""
- Note, job-name is normally the same name as the job that
- is running but there is no restriction on what you put. If you
- want to start the job by hand and use job overrides such as
- storage=xxx, realize that the job will be started with the
- default storage values not the overrides. The level=%l guarantees
- that the chosen level of the job is the same, and the since=...
- ensures that the job uses *exactly* the same time/date for incremental
- and differential jobs. The since=... is ignored when level=Full.
- A cloned job will not start additional clones, so it is not possible
- to recurse.
-- New Options keywords in a FileSet directive (backported to 1.36.3):
- - WildDir xxx
- Will do a wild card match against directories (files will not
- be matched).
- - WildFile xxx
- Will do a wild card match against files (directories will not
- be matched).
- - RegexDir xxx
- Will do a regular expression match against directories (files
- will not be matched).
- - RegexFile xxx
- Will do a regular expression match against files( directories
- will not be matched).
- - IgnoreCase = yes | no
- Will ignore case in wild card and regular expression matches.
- This is handy for Windows where filename case is not significant.
- - FsType = string
- where string is a filesystem type: ext2, jfs, ntfs, proc,
- reiserfs, xfs, usbdevfs, sysfs, smbfs, iso9660. For ext3
- systems, use ext2. You may have multiple fstype directives
- and thus permit multiple filesystem types. If the type
- specified on the fstype directive does not match the
- filesystem for a particular directive, that directory will
- not be backed up. This directive can be used to prevent
- backing up non-local filesystems.
- - HFS Plus Support = yes | no
- If set, Mac OS X resource forks will be saved and restored.
-- Label Type = ANSI | IBM | Bacula
- Implemented in Director Pool resource and in SD Device resource.
- If it is specified in the SD Device resource, it will take
- precedence over the value passed from the Director to the SD.
-- Check Labels = yes | no
- Implemented in the SD Device resource. If you intend to read
- ANSI or IBM labels, this *must* be set. Even if the volume
- is not ANSI labeled, you can set this to yes, and Bacula will
- check the label type.
-- Scripts Directory = <directory> name. Defines the directory from
- which Bacula scripts will be called for events. In fact, Bacula
- appends this name to the standard Python list of search directories,
- so the script could also be in any of the Python system directories.
-- In FileSet, you can exclude backing up of hardlinks (if you have
- a lot, it can be very expensive), by using:
- HardLinks = no
- in the Options section. Patch supplied by David R Bosso. Thanks.
-- MaximumPartSize = bytes (SD, Device resource)
- Defines the maximum part size.
-- Requires Mount = Yes/No (SD, Device resource)
- Defines if the device require to be mounted to be read, and if it
- must be written in a special way. If it set, the following directives
- must be defined in the same Device resource:
- + Mount Point = directory
- Directory where the device must be mounted.
- + Mount Command = name-string
- Command that must be executed to mount the device. Before the command
- is executed, %a is replaced with the Archive Device, and %m with the
- Mount Point.
- + Unmount Command = name-string
- Command that must be executed to unmount the device. Before the
- command is executed, %a is replaced with the Archive Device, and
- %m with the Mount Point.
- + Write Part Command = name-string
- Command that must be executed to write a part to the device. Before
- the command is executed, %a is replaced with the Archive Device, %m
- with the Mount Point, %n with the current part number (0-based),
- and %v with the current part filename.
- + Free Space Command = name-string
- Command that must be executed to check how much free space is left
- on the device. Before the command is executed, %a is replaced with
- the Archive Device, %m with the Mount Point, %n with the current part
- number (0-based), and %v with the current part filename.
-- Write Part After Job = Yes/No (DIR, Job Resource, and Schedule Resource)
- If this directive is set to yes (default no), a new part file will be
- created after the job is finished.
-- A pile of new Directives to support TLS. Please see the TLS chapter
- of the manual.
-
-New Commands:
-- "python restart" restarts the Python interpreter. Rather brutal, make
- sure no Python scripts are running. This permits you to change
- a Python script and get Bacula to use the new script.
-
-New configure options:
-- --with-libintl-prefix for defining alternate locations for
- the NLS internationalization libraries. Not normally required.
-- --datadir for defining where the language files will be installed
- required only if you do not want the default /usr/share.
-
-Items to note!!!
-- The Storage daemon now keeps track of what tapes it is using
- (was not the case in 1.36.x). This means that you must be much
- more careful when removing tapes and putting up a new one. In
- general, you should always do a "unmount" prior to removing a
- tape, and a "mount" after putting a new one into the drive.
-- If you use an Autochanger, you MUST update your SD conf file
- to use the new Autochanger resource. Otherwise, certain commands
- such as "update slots" may not work.
-- You must add --with-python=[DIR] to the configure command line
- if you want Python support. Python 2.2, 2.3 and 2.4 should be
- automatically detected if in the standard place.
-- When linking with --with-python, there are a few warnings that
- can be ignored.
-- You must either create a new catalog database or upgrade your
- old database. After installation, run from your scripts
- directory:
-
- ./upgrade_bacula_tables
-
- You can also find this script in the <bacula-source>/src/cats
- directory.
-- The Director, Storage daemon, and File daemons are
- Deamons are not compatible with prior versions.
- All FDs must be upgraded at the same time.
-- You must add --with-openssl to the configure command line if
- you want TLS communications encryption support.
-- Disk seeking during restores does not yet work correctly in
- all cases, so it is turned off.
-- Note, with gcc (GCC) 4.0.1 20050727 (Red Hat 4.0.1-5) on an
- AMD64 CPU running 64 bit CentOS4, there is a compiler bug that
- generates bad code that causes Bacula to segment fault.
- Typically you will see this in the Storage daemon first. The
- solution is to compile Bacula ensuring that no optimization is
- turned on (normally it is -O2).
- This same compiler bug has been reported and confirmed with
- gcc (GCC) 4.0.2 20050901 (prerelease) (SUSE Linux) running on
- an AMD64 CPU. This for the moment, I would recommend that all
- users of GCC 4.0.1 or greater turn off all optimization when
- compiling.
-
-
-Other Items:
-- Security fixes for temp files created in mtx-changer, during
- ./configure, and during making of Rescue disk.
-- A new script, dvd-handler, in the scripts directory,
- which is designed to be used as parameters to Write Part Command and
- Free Space Command. They need the dvd+rw-tools to be installed
- (http://fy.chalmers.se/~appro/linux/DVD+RW/) AND, the growisofs
- program must be patched using the
- <bacula-source>/patches/dvd+rw-tools-5.21.4.10.8.bacula.patch
- You must have Python installed to run the scripts.
-- Part files support: File volumes can now be split into multiple
- files, called "parts".
-- For the details of the Python scripting support, please see the new
- Python Scripting chapter in the manual.
-- The default user/group for the Director and Storage daemon installed
- by rpms is bacula/bacula, thus you may need to add additional permissions
- to your database, or modify the permissions of the tape drive. If
- all else fails, change to using user=root. However, it is more secure
- to use user=bacula.
+ Release Notes for Bacula 2.2.0
+
+ Bacula code: Total files = 438 Total lines = 154,329 (*.h *.c *.in)
+
+The major features are:
+- First cut of bat (Bacula Administration Tool)
+- Red/Black restore in memory tree (500 times faster loading).
+- Much faster insertion of attributes (somewhere around 10 times).
+- The Regex Where code to allow easier relocation of restored files.
+- Socket level heartbeat (untested).
+- posix_fadvise() use in the FD to improve performance.
+- Simpler locking in the SD in the reservation system.
+- Much improved Volume reservation code that should eliminate most
+ conflicts experienced in multiple drive autochangers.
+- Detection of file size/date change during backup if enabled.
+- New Recycle Pool feature.
+- Efficient implementation of very large include/exclude lists.