- Release Notes for Bacula 5.0.0
+ Release Notes for Bacula 5.0.1
Bacula code: Total files = 1,081 Total lines = 217,272 (Using SLOCCount)
+!!!!!!!!!!!!!!!!!!!!! NOTE !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
+The Allow Duplicate Jobs directive has been significantly
+reworked, and the default value has changed. See below.
+
+Truncate On Purge has been totally rewritten. See the new
+features section of the manual.
+!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
+
+Changes since 5.0.0
+-------------------
+- We believe that we have resolved most of the problems
+ concerning canceled or failed jobs being "stuck" in the
+ Director. There is one outstanding problem in the SD when
+ canceling jobs that we will fix in the next major release.
+ If you see jobs that seem to be stuck, in general issuing
+ a cancel command in bconsole should now make them go away.
+
+Directives:
+- The default for "Allow Duplicate Jobs" has been changed from
+ no to yes. If you use this directive, please check your
+ conf file, and note the next two items !!!!!!!!!!!!!!!!!!!
+- AllowHigherDuplicates disabled. It did not work as documented
+ and was confusing.
+- New directive "CancelLowerLevelDuplicates" See New Features
+ section in the manual.
+- Truncate on Purge rewritten. See New Features section in the manual.
+
+Bug fixes:
+1448 1466 1467 1468 1476 1481 1486 1488 1494 1497 1499 1501 1509
+
+- Apply MacOSX installer patch from bug #1509
+- Apply fix to previous fix of Copy problem. Fix proposed by reporter o
+ #1476
+- Fix bug #1501 -t does not print errors
+- Apply SQLite3 update fix from bug #1497
+- Apply bashism fix for diskchanger.in script from bug #1499
+- Apply rpm fix for Sci Linux from bug #1494
+- Take most recent Ukranian po from bug #1448
+- Probable fix for Copy/Migration bug #1476
+- Fix bug #1488 -- avoid recursion and race conditions in messages.c
+- Upgrade cats library also to 5.0.0
+- Fix missing console page in bat
+- Add bat help files to Window install
+- Improve Windows upgrade to ensure old FD is shutdown
+- Fix bug #1481 -- bat consumes all console file descriptors
+- Backport truncate on purge from 5.1.x
+- Fix bug #1486 -- bat doesn't show any errors on command-line
+- Update the bsock error URL
+- Correct .my.cnf umask in make_catalog_backup.pl
+- Apply fix for dbcheck use by make_catalog_backup.pl
+- Fix seg fault in bscan from new comment field
+- Allow multiple CNs when using TLS
+- Fix seg fault in SQlite driver
+- Make shared libs version the same as the Bacula release version
+- Remove file_index sequential check
+- Fix #1466 about Bogus pruning message
+
+For Packagers:
+1. The default query.sql file is now, except for some comments, empty.
+The old file, which we no longer support (it is impossible or difficult to
+make it work on every backend, and the queries are mostly contributed) can
+be found in <bacula-source>/examples/sample-query.sql. The sample file is
+not installed by the Makefiles
+
+2. When you install the mtx-changer script, you must also install
+mtx-changer.conf if it does not exist. This new file (mtx-changer.conf) is
+required for mtx-changer to work, but it is a user configurable file, so on
+any update, any existing file should not be overwritten.
+
+3. Bat should be built on every platform that is capabable of running Qt.
+However, the Qt code is changing rather quickly and is not always
+compatible from version to version. We have built and verified bat on Qt
+4.3.4. We strongly recommend that you do not build and distribute bat with
+any other version of Qt unless you personally test it. To build against Qt
+4.3.4, download the depkgs-qt package from the Bacula Source Forge download
+location, read the README file and follow the instructions.
+
+If you are building for Bacula version 5.0.0, please ensure that you do not
+have qmake-qt4 loaded on your system. If you do, either remove it or
+rename it before trying to build bat. If you do not, bat will probably be
+built using the shared objects on your system. For Bacula 5.0.1 and later,
+this problem (bug) does not exist.
+
+depkgs-qt does not install Qt on your system, nor does it interfere with
+you having any other version of Qt installed on your system. Once you
+build bat with depkgs-qt, it should *not* use the Qt shared objects, but
+rather they will be linked into the program. After fully installing bat
+(make install), you can run "ldd bat" to see what shared objects it will
+use. If any Qt shared objects are referenced, something has gone wrong.
+
+4. Unless absolutely necessary, we recommend that you do not define any
+special library environment variables that apply to the ./configure -- for
+example: LIBDIR=/... ./configure <your-options> is strongly discouraged.
+Doing so, could potentially cause Bacula to be linked against the wrong
+shared objects.
+
+5. The Bacula project strongly recommends that you install Bacula into a
+single directory, with a few minor exceptions such as the MySQL or
+PostgreSQL databases. Preferrably this should be /opt/bacula. The full
+recommendation is:
+
+#!/bin/sh
+# Recommended configure script for Bacula
+prefix=/opt/bacula
+email=xxx@yyy.zz
+CFLAGS="-g -O2 -Wall" \
+ ./configure \
+ --sbindir=${prefix}/bin \
+ --sysconfdir=${prefix}/etc \
+ --docdir=${prefix}/html \
+ --htmldir=${prefix}/html \
+ --with-working-dir=${prefix}/working \
+ --with-pid-dir=${prefix}/working \
+ --with-subsys-dir=${prefix}/working \
+ --with-scriptdir=${prefix}/scripts \
+ --with-plugindir=${prefix}/plugins \
+ --libdir=${prefix}/lib \
+ --enable-smartalloc \
+ --enable-tray-monitor \
+ --enable-bat \
+ --with-mysql \
+ --with-dump-email=${email} \
+ --with-job-email=${email} \
+ --with-smtp-host=localhost \
+ --with-baseport=9101
+
+Obviously, the email, and some of the minor options (mysql, postgresql,
+...) can be changed to suit your distribution, but the directory names
+defined above are strongly recommended, and over time the default values in
+the bacula-dir.conf and bacula-sd.conf will reflect these choices.
+
+If you have any questions about this or would like a detailed document
+describing our recommendations including packaging requirements, please
+send an email to the bacula-devel list.
+
+6. Starting with Bacula version 3.0.0 up to Bacula 5.0.0, the shared
+libraries that Bacula uses by default are named xxx-1.0.0. Starting with
+Bacula 5.0.1, we are going to name the libraries using the Bacula version.
+So in Bacula 5.0.1, the libraries will be named xxx-5.0.1. With future
+versions, the last digit may or may not change when we distribute patch
+updates (i.e. the last digit of the version changes). This will depend on
+whether or not we have changed something in the library. Hopefully this
+new procedure will resolve some of the incompatibility problems between
+different versions of the shared objects.
+
+7. The default build option for bconsole is conio (my own little console
+routines). I did this because some years ago, readline was very difficult
+to maintain -- it and where it was found seemed to change on every release.
+This generated at the time a number of support problems. It seems to me
+that since then there have been very few problems with readline. As a
+consequence, I have no problem if you want to make bconsole with readline
+enabled. It will actually give some very nice new bconsole command
+completion functionality that Eric has written. Bottom line: feel free to
+use readline or not as you please.
+
+==========================================================
+
+
+
+Release Notes for Bacula 5.0.0
Release Numbering:
-----------------------------------------------------------
upgrade.
+
+
Changes since 3.0.3a (the last Bacula Project release):
-------------------------------------------------------
projects / bacula / bacula / blobdiff