Kern's ToDo List
- 29 October 2005
+ 21 September 2009
-Major development:
-Project Developer
-======= =========
-Version 1.37 Kern (see below)
-========================================================
+Rescue:
+Add to USB key:
+ gftp sshfs kile kate lsssci m4 mtx nfs-common nfs-server
+ patch squashfs-tools strace sg3-utils screen scsiadd
+ system-tools-backend telnet dpkg traceroute urar usbutils
+ whois apt-file autofs busybox chkrootkit clamav dmidecode
+ manpages-dev manpages-posix manpages-posix-dev
-Final items for 1.37 before release:
Document:
-- Does ClientRunAfterJob fail the job on a bad return code?
+- package sg3-utils, program sg_map
+- !!! Cannot restore two jobs a the same time that were
+ written simultaneously unless they were totally spooled.
- Document cleaning up the spool files:
db, pid, state, bsr, mail, conmsg, spool
- Document the multiple-drive-changer.txt script.
- Pruning with Admin job.
- Does WildFile match against full name? Doc.
-
-For 1.39:
-- Look at -D_FORTIFY_SOURCE=2
-- Close STDOUT if debug_level == 0
+- %d and %v only valid on Director, not for ClientRunBefore/After.
+- During tests with the 260 char fix code, I found one problem:
+ if the system "sees" a long path once, it seems to forget it's
+ working drive (e.g. c:\), which will lead to a problem during
+ the next job (create bootstrap file will fail). Here is the
+ workaround: specify absolute working and pid directory in
+ bacula-fd.conf (e.g. c:\bacula\working instead of
+ \bacula\working).
+- Document techniques for restoring large numbers of files.
+- Document setting my.cnf to big file usage.
+- Correct the Include syntax in the m4.xxx files in examples/conf
+- Document all the little details of setting up certificates for
+ the Bacula data encryption code.
+- Document more precisely how to use master keys -- especially
+ for disaster recovery.
+
+Priority:
+================
+24-Jul 09:56 rufus-fd JobId 1: VSS Writer (BackupComplete): "System Writer", State: 0x1 (VSS_WS_STABLE)
+24-Jul 09:56 rufus-fd JobId 1: Warning: VSS Writer (BackupComplete): "ASR Writer", State: 0x8 (VSS_WS_FAILED_AT_PREPARE_SNAPSHOT)
+24-Jul 09:56 rufus-fd JobId 1: VSS Writer (BackupComplete): "WMI Writer", State: 0x1 (VSS_WS_STABLE)
+- Add external command to lookup hostname (eg nmblookup timmy-win7)
+nmblookup gato
+querying gato on 127.255.255.255
+querying gato on 192.168.1.255
+ 192.168.1.8 gato<00>
+ 192.168.1.11 gato<00>
+ 192.168.1.8 gato<00>
+ 192.168.1.11 gato<00>
+- Possibly allow SD to spool even if a tape is not mounted.
+- How to sync remote offices.
+- Windows Bare Metal
+- Backup up windows system state
+- Complete Job restart
+- Look at rsysnc for incremental updates and dedupping
+- Implement rwlock() for SD that takes why and can_steal to replace
+ existing block/lock mechanism. rlock() would allow multiple readers
+ wlock would allow only one writer.
+- For Windows disaster recovery see http://unattended.sf.net/
+- Add "before=" "olderthan=" to FileSet for doing Base of
+ unchanged files.
+- Show files/second in client status output.
+- Don't attempt to restore from "Disabled" Volumes.
+- Have SD compute MD5 or SHA1 and compare to what FD computes.
+- Make VolumeToCatalog calculate an MD5 or SHA1 from the
+ actual data on the Volume and compare it.
+- Remove queue.c code.
+- Implement multiple jobid specification for the cancel command,
+ similar to what is permitted on the update slots command.
+- Ensure that the SD re-reads the Media record if the JobFiles
+ does not match -- it may have been updated by another job.
+- Add MD5 or SHA1 check in SD for data validation
+- When reserving a device to read, check to see if the Volume
+ is already in use, if so wait. Probably will need to pass the
+ Volume. See bug #1313. Create a regression test to simulate
+ this problem and see if VolumePollInterval fixes it. Possibly turn
+ it on by default.
+
+- Page hash tables
+- Deduplication
+- Why no error message if restore has no permission on the where
+ directory?
+- Possibly allow manual "purge" to purge a Volume that has not
+ yet been written (even if FirstWritten time is zero) see ua_purge.c
+ is_volume_purged().
+- Add disk block detection bsr code (make it work).
+- Remove done bsrs.
+- Detect deadlocks in reservations.
+- Plugins:
+ - Add list during dump
+ - Add in plugin code flag
+ - Add bRC_EndJob -- stops more calls to plugin this job
+ - Add bRC_Term (unload plugin)
+ - remove time_t from Jmsg and use utime_t?
+- Deadlock detection, watchdog sees if counter advances when jobs are
+ running. With debug on, can do a "status" command.
+- User options for plugins.
+- Pool Storage override precedence over command line.
+- Autolabel only if Volume catalog information indicates tape not
+ written. This will avoid overwriting a tape that gets an I/O
+ error on reading the volume label.
+- I/O error, SD thinks it is not the right Volume, should check slot
+ then disable volume, but Asks for mount.
+- Can be posible modify package to create and use configuration files in
+ the Debian manner?
+
+ For example:
+
+ /etc/bacula/bacula-dir.conf
+ /etc/bacula/conf.d/pools.conf
+ /etc/bacula/conf.d/clients.conf
+ /etc/bacula/conf.d/storages.conf
+
+ and into bacula-dir.conf file include
+
+ @/etc/bacula/conf.d/pools.conf
+ @/etc/bacula/conf.d/clients.conf
+ @/etc/bacula/conf.d/storages.conf
+- Possibly add an Inconsistent state when a Volume is in error
+ for non I/O reasons.
+- Fix #ifdefing so that smartalloc can be disabled. Check manual
+ -- the default is enabled.
+- Dangling softlinks are not restored properly. For example, take a
+ soft link such as src/testprogs/install-sh, which points to /usr/share/autoconf...
+ move the directory to another machine where the file /usr/share/autoconf does
+ not exist, back it up, then try a full restore. It fails.
+- Softlinks that point to non-existent file are not restored in restore all,
+ but are restored if the file is individually selected. BUG!
+- Prune by Job
+- Prune by Job Level (Full, Differential, Incremental)
+- modify pruning to keep a fixed number of versions of a file,
+ if requested.
+- the cd-command should allow complete paths
+ i.e. cd /foo/bar/foo/bar
+ -> if a customer mails me the path to a certain file,
+ its faster to enter the specified directory
+- Make tree walk routines like cd, ls, ... more user friendly
+ by handling spaces better.
+- When doing a restore, if the user does an "update slots"
+ after the job started in order to add a restore volume, the
+ values prior to the update slots will be put into the catalog.
+ Must retrieve catalog record merge it then write it back at the
+ end of the restore job, if we want to do this right.
+=== rate design
+ jcr->last_rate
+ jcr->last_runtime
+ MA = (last_MA * 3 + rate) / 4
+ rate = (bytes - last_bytes) / (runtime - last_runtime)
+===
+- Add a recursive mark command (rmark) to restore.
+- Look at simplifying File exclusions.
+- Scripts
+- Separate Files and Directories in catalog
+- Create FileVersions table
+- finish implementation of fdcalled -- see ua_run.c:105
+- Fix problem in postgresql.c in my_postgresql_query, where the
+ generation of the error message doesn't differentiate result==NULL
+ and a bad status from that result. Not only that, the result is
+ cleared on a bail_out without having generated the error message.
+- Implement SDErrors (must return from SD)
+- Implement continue spooling while despooling.
+- Remove all install temp files in Win32 PLUGINSDIR.
+- No where in restore causes kaboom.
+- Performance: multiple spool files for a single job.
+- Performance: despool attributes when despooling data (problem
+ multiplexing Dir connection).
+- Implement wait_for_sysop() message display in wait_for_device(), which
+ now prints warnings too often.
+- Ensure that each device in an Autochanger has a different
+ Device Index.
+- Look at sg_logs -a /dev/sg0 for getting soft errors.
+- btape "test" command with Offline on Unmount = yes
+
+ This test is essential to Bacula.
+
+ I'm going to write one record in file 0,
+ two records in file 1,
+ and three records in file 2
+
+ 02-Feb 11:00 btape: ABORTING due to ERROR in dev.c:715
+ dev.c:714 Bad call to rewind. Device "LTO" (/dev/nst0) not open
+ 02-Feb 11:00 btape: Fatal Error because: Bacula interrupted by signal 11: Segmentation violation
+ Kaboom! btape, btape got signal 11. Attempting traceback.
+
+- Encryption -- email from Landon
+ > The backup encryption algorithm is currently not configurable, and is
+ > set to AES_128_CBC in src/filed/backup.c. The encryption code
+ > supports a number of different ciphers (as well as adding arbitrary
+ > new ones) -- only a small bit of code would be required to map a
+ > configuration string value to a CRYPTO_CIPHER_* value, if anyone is
+ > interested in implementing this functionality.
+
+- Add the OS version back to the Win32 client info.
+- Restarted jobs have a NULL in the from field.
+- Modify SD status command to indicate when the SD is writing
+ to a DVD (the device is not open -- see bug #732).
+- Look at the possibility of adding "SET NAMES UTF8" for MySQL,
+ and possibly changing the blobs into varchar.
+- Test Volume compatibility between machine architectures
+- Encryption documentation
+
+Professional Needs:
+- Migration from other vendors
+ - Date change
+ - Path change
+- Filesystem types
+- Backup conf/exe (all daemons)
+- Detect state change of system (verify)
+- SD to SD
+- Novell NSS backup http://www.novell.com/coolsolutions/tools/18952.html
+- Compliance norms that compare restored code hash code.
+- David's priorities
+ Copypools
+ Extract capability (#25)
+ Threshold triggered migration jobs (not currently in list, but will be
+ needed ASAP)
+ Client triggered backups
+ Complete rework of the scheduling system (not in list)
+ Performance and usage instrumentation (not in list)
+ See email of 21Aug2007 for details.
+- Look at: http://tech.groups.yahoo.com/group/cfg2html
+ and http://www.openeyet.nl/scc/ for managing customer changes
+
+Projects:
+- Pool enhancements
+ - Access Mode = Read-Only, Read-Write, Unavailable, Destroyed, Offsite
+ - Pool Type = Copy
+ - Maximum number of scratch volumes
+ - Maximum File size
+ - Next Pool (already have)
+ - Reclamation threshold
+ - Reclamation Pool
+ - Reuse delay (after all files purged from volume before it can be used)
+ - Copy Pool = xx, yyy (or multiple lines).
+ - Catalog = xxx
+ - Allow pool selection during restore.
+
+- Average tape size from Eric
+ SELECT COALESCE(media_avg_size.volavg,0) * count(Media.MediaId) AS volmax, GROUP BY Media.MediaType, Media.PoolId, media_avg_size.volavg
+ count(Media.MediaId) AS volnum,
+ sum(Media.VolBytes) AS voltotal,
+ Media.PoolId AS PoolId,
+ Media.MediaType AS MediaType
+ FROM Media
+ LEFT JOIN (SELECT avg(Media.VolBytes) AS volavg,
+ Media.MediaType AS MediaType
+ FROM Media
+ WHERE Media.VolStatus = 'Full'
+ GROUP BY Media.MediaType
+ ) AS media_avg_size ON (Media.MediaType = media_avg_size.MediaType)
+ GROUP BY Media.MediaType, Media.PoolId, media_avg_size.volavg
+- Performance
+ - Despool attributes in separate thread
+ - Database speedups
+ - Embedded MySQL
+ - Check why restore repeatedly sends Rechdrs between
+ each data chunk -- according to James Harper 9Jan07.
+- Features
+ - Better scheduling
+ - More intelligent re-run
+ - Incremental backup -- rsync, Stow
+
+- Make Bacula by default not backup tmpfs, procfs, sysfs, ...
+- Fix hardlinked immutable files when linking a second file, the
+ immutable flag must be removed prior to trying to link it.
+- Change dbcheck to tell users to use native tools for fixing
+ broken databases, and to ensure they have the proper indexes.
+- add udev rules for Bacula devices.
+- If a job terminates, the DIR connection can close before the
+ Volume info is updated, leaving the File count wrong.
+- Look at why SIGPIPE during connection can cause seg fault in
+ writing the daemon message, when Dir dropped to bacula:bacula
+- Look at zlib 32 => 64 problems.
+- Fix bextract to restore ACLs, or better yet, use common routines.
+- New dot commands from Arno.
+ .show device=xxx lists information from one storage device, including
+ devices (I'm not even sure that information exists in the DIR...)
+ .move eject device=xxx mostly the same as 'unmount xxx' but perhaps with
+ better machine-readable output like "Ok" or "Error busy"
+ .move eject device=xxx toslot=yyy the same as above, but with a new
+ target slot. The catalog should be updated accordingly.
+ .move transfer device=xxx fromslot=yyy toslot=zzz
+
+Low priority:
+- Article: http://www.heise.de/open/news/meldung/83231
+- Article: http://www.golem.de/0701/49756.html
+- Article: http://lwn.net/Articles/209809/
+- Article: http://www.onlamp.com/pub/a/onlamp/2004/01/09/bacula.html
+- Article: http://www.linuxdevcenter.com/pub/a/linux/2005/04/07/bacula.html
+- Article: http://www.osreviews.net/reviews/admin/bacula
+- Article: http://www.debianhelp.co.uk/baculaweb.htm
+- Article:
+- Wikis mentioning Bacula
+ http://wiki.finkproject.org/index.php/Admin:Backups
+ http://wiki.linuxquestions.org/wiki/Bacula
+ http://www.openpkg.org/product/packages/?package=bacula
+ http://www.iterating.com/products/Bacula
+ http://net-snmp.sourceforge.net/wiki/index.php/Net-snmp_extensions
+ http://www.section6.net/wiki/index.php/Using_Bacula_for_Tape_Backups
+ http://bacula.darwinports.com/
+ http://wiki.mandriva.com/en/Releases/Corporate/Server_4/Notes#Bacula
+ http://en.wikipedia.org/wiki/Bacula
+
+- Bacula Wikis
+ http://www.devco.net/pubwiki/Bacula/
+ http://paramount.ind.wpi.edu/wiki/doku.php
+ http://gentoo-wiki.com/HOWTO_Backup
+ http://www.georglutz.de/wiki/Bacula
+ http://www.clarkconnect.com/wiki/index.php?title=Modules_-_LAN_Backup/Recovery
+ http://linuxwiki.de/Bacula (in German)
+
+- Figure out how to configure query.sql. Suggestion to use m4:
+ == changequote.m4 ===
+ changequote(`[',`]')dnl
+ ==== query.sql.in ===
+ :List next 20 volumes to expire
+ SELECT
+ Pool.Name AS PoolName,
+ Media.VolumeName,
+ Media.VolStatus,
+ Media.MediaType,
+ ifdef([MySQL],
+ [ FROM_UNIXTIME(UNIX_TIMESTAMP(Media.LastWritten) Media.VolRetention) AS Expire, ])dnl
+ ifdef([PostgreSQL],
+ [ media.lastwritten + interval '1 second' * media.volretention as expire, ])dnl
+ Media.LastWritten
+ FROM Pool
+ LEFT JOIN Media
+ ON Media.PoolId=Pool.PoolId
+ WHERE Media.LastWritten>0
+ ORDER BY Expire
+ LIMIT 20;
+ ====
+ Command: m4 -DmySQL changequote.m4 query.sql.in >query.sql
+
+ The problem is that it requires m4, which is not present on all machines
+ at ./configure time.
+
+==== SQL
+# get null file
+select FilenameId from Filename where Name='';
+# Get list of all directories referenced in a Backup.
+select Path.Path from Path,File where File.JobId=nnn and
+ File.FilenameId=(FilenameId-from-above) and File.PathId=Path.PathId
+ order by Path.Path ASC;
+
+- Mount on an Autochanger with no tape in the drive causes:
+ Automatically selected Storage: LTO-changer
+ Enter autochanger drive[0]: 0
+ 3301 Issuing autochanger "loaded drive 0" command.
+ 3302 Autochanger "loaded drive 0", result: nothing loaded.
+ 3301 Issuing autochanger "loaded drive 0" command.
+ 3302 Autochanger "loaded drive 0", result: nothing loaded.
+ 3902 Cannot mount Volume on Storage Device "LTO-Drive1" (/dev/nst0) because:
+ Couldn't rewind device "LTO-Drive1" (/dev/nst0): ERR=dev.c:678 Rewind error on "LTO-Drive1" (/dev/nst0). ERR=No medium found.
+ 3905 Device "LTO-Drive1" (/dev/nst0) open but no Bacula volume is mounted.
+ If this is not a blank tape, try unmounting and remounting the Volume.
+- If Drive 0 is blocked, and drive 1 is set "Autoselect=no", drive 1 will
+ be used.
+- Autochanger did not change volumes.
+ select * from Storage;
+ +-----------+-------------+-------------+
+ | StorageId | Name | AutoChanger |
+ +-----------+-------------+-------------+
+ | 1 | LTO-changer | 0 |
+ +-----------+-------------+-------------+
+ 05-May 03:50 roxie-sd: 3302 Autochanger "loaded drive 0", result is Slot 11.
+ 05-May 03:50 roxie-sd: Tibs.2006-05-05_03.05.02 Warning: Director wanted Volume "LT
+ Current Volume "LT0-002" not acceptable because:
+ 1997 Volume "LT0-002" not in catalog.
+ 05-May 03:50 roxie-sd: Tibs.2006-05-05_03.05.02 Error: Autochanger Volume "LT0-002"
+ Setting InChanger to zero in catalog.
+ 05-May 03:50 roxie-dir: Tibs.2006-05-05_03.05.02 Error: Unable to get Media record
+
+ 05-May 03:50 roxie-sd: Tibs.2006-05-05_03.05.02 Fatal error: Error getting Volume i
+ 05-May 03:50 roxie-sd: Tibs.2006-05-05_03.05.02 Fatal error: Job 530 canceled.
+ 05-May 03:50 roxie-sd: Tibs.2006-05-05_03.05.02 Fatal error: spool.c:249 Fatal appe
+ 05-May 03:49 Tibs: Tibs.2006-05-05_03.05.02 Fatal error: c:\cygwin\home\kern\bacula
+ , got
+ (missing)
+ llist volume=LTO-002
+ MediaId: 6
+ VolumeName: LTO-002
+ Slot: 0
+ PoolId: 1
+ MediaType: LTO-2
+ FirstWritten: 2006-05-05 03:11:54
+ LastWritten: 2006-05-05 03:50:23
+ LabelDate: 2005-12-26 16:52:40
+ VolJobs: 1
+ VolFiles: 0
+ VolBlocks: 1
+ VolMounts: 0
+ VolBytes: 206
+ VolErrors: 0
+ VolWrites: 0
+ VolCapacityBytes: 0
+ VolStatus:
+ Recycle: 1
+ VolRetention: 31,536,000
+ VolUseDuration: 0
+ MaxVolJobs: 0
+ MaxVolFiles: 0
+ MaxVolBytes: 0
+ InChanger: 0
+ EndFile: 0
+ EndBlock: 0
+ VolParts: 0
+ LabelType: 0
+ StorageId: 1
+
+ Note VolStatus is blank!!!!!
+ llist volume=LTO-003
+ MediaId: 7
+ VolumeName: LTO-003
+ Slot: 12
+ PoolId: 1
+ MediaType: LTO-2
+ FirstWritten: 0000-00-00 00:00:00
+ LastWritten: 0000-00-00 00:00:00
+ LabelDate: 2005-12-26 16:52:40
+ VolJobs: 0
+ VolFiles: 0
+ VolBlocks: 0
+ VolMounts: 0
+ VolBytes: 1
+ VolErrors: 0
+ VolWrites: 0
+ VolCapacityBytes: 0
+ VolStatus: Append
+ Recycle: 1
+ VolRetention: 31,536,000
+ VolUseDuration: 0
+ MaxVolJobs: 0
+ MaxVolFiles: 0
+ MaxVolBytes: 0
+ InChanger: 0
+ EndFile: 0
+ EndBlock: 0
+ VolParts: 0
+ LabelType: 0
+ StorageId: 1
+===
+ mount
+ Automatically selected Storage: LTO-changer
+ Enter autochanger drive[0]: 0
+ 3301 Issuing autochanger "loaded drive 0" command.
+ 3302 Autochanger "loaded drive 0", result: nothing loaded.
+ 3301 Issuing autochanger "loaded drive 0" command.
+ 3302 Autochanger "loaded drive 0", result: nothing loaded.
+ 3902 Cannot mount Volume on Storage Device "LTO-Drive1" (/dev/nst0) because:
+ Couldn't rewind device "LTO-Drive1" (/dev/nst0): ERR=dev.c:678 Rewind error on "LTO-Drive1" (/dev/nst0). ERR=No medium found.
+
+ 3905 Device "LTO-Drive1" (/dev/nst0) open but no Bacula volume is mounted.
+ If this is not a blank tape, try unmounting and remounting the Volume.
+
+- http://www.dwheeler.com/essays/commercial-floss.html
+- Add VolumeLock to prevent all but lock holder (SD) from updating
+ the Volume data (with the exception of VolumeState).
+- The btape fill command does not seem to use the Autochanger
+- Make Windows installer default to system disk drive.
+- Look at using ioctl(FIOBMAP, ...) on Linux, and
+ DeviceIoControl(..., FSCTL_QUERY_ALLOCATED_RANGES, ...) on
+ Win32 for sparse files.
+ http://www.flexhex.com/docs/articles/sparse-files.phtml
+ http://www.informatik.uni-frankfurt.de/~loizides/reiserfs/fibmap.html
+- Directive: at <event> "command"
+- Command: pycmd "command" generates "command" event. How to
+ attach to a specific job?
+- run_cmd() returns int should return JobId_t
+- get_next_jobid_from_list() returns int should return JobId_t
+- Document export LDFLAGS=-L/usr/lib64
+- Network error on Win32 should set Win32 error code.
+- What happens when you rename a Disk Volume?
+- Job retention period in a Pool (and hence Volume). The job would
+ then be migrated.
- Add Win32 FileSet definition somewhere
- Look at fixing restore status stats in SD.
-- Make selection of Database used in restore correspond to
- client.
+- Look at using ioctl(FIMAP) and FIGETBSZ for sparse files.
+ http://www.informatik.uni-frankfurt.de/~loizides/reiserfs/fibmap.html
- Implement a mode that says when a hard read error is
encountered, read many times (as it currently does), and if the
block cannot be read, skip to the next block, and try again. If
that fails, skip to the next file and try again, ...
-- Add ACL to restore only to original location.
-- Add a recursive mark command (rmark) to restore.
-- "Minimum Job Interval = nnn" sets minimum interval between Jobs
- of the same level and does not permit multiple simultaneous
- running of that Job (i.e. lets any previous invocation finish
- before doing Interval testing).
-- Look at simplifying File exclusions.
-- Fix store_yesno to be store_bitmask.
-- New directive "Delete purged Volumes"
+- Add level table:
+ create table LevelType (LevelType binary(1), LevelTypeLong tinyblob);
+ insert into LevelType (LevelType,LevelTypeLong) values
+ ("F","Full"),
+ ("D","Diff"),
+ ("I","Inc");
- new pool XXX with ScratchPoolId = MyScratchPool's PoolId and
let it fill itself, and RecyclePoolId = XXX's PoolId so I can
see if it become stable and I just have to supervise
MyScratchPool
- If I want to remove this pool, I set RecyclePoolId = MyScratchPool's
PoolId, and when it is empty remove it.
-- Figure out how to recycle Scratch volumes back to the Scratch
- Pool.
- Add Volume=SCRTCH
- Allow Check Labels to be used with Bacula labels.
- "Resuming" a failed backup (lost line for example) by using the
days before it needs changing.
- Command to show next tape that will be used for a job even
if the job is not scheduled.
---- create_file.c.orig Fri Jul 8 12:13:05 2005
-+++ create_file.c Fri Jul 8 12:13:07 2005
-@@ -195,6 +195,8 @@
- attr->ofname, be.strerror());
- return CF_ERROR;
- }
-+ } else if(S_ISSOCK(attr->statp.st_mode)) {
-+ Dmsg1(200, "Skipping socket: %s\n", attr->ofname);
- } else {
- Dmsg1(200, "Restore node: %s\n", attr->ofname);
- if (mknod(attr->ofname, attr->statp.st_mode, attr->statp.st_rdev) != 0 && errno != EEXIST) {
- From: Arunav Mandal <amandal@trolltech.com>
1. When jobs are running and bacula for some reason crashes or if I do a
restart it remembers and jobs it was running before it crashed or restarted
backups of the same client and if we again try to start a full backup of
client backup abc bacula won't complain. That should be fixed.
-- Fix bpipe.c so that it does not modify results pointer.
- ***FIXME*** calling sequence should be changed.
-1.xx Major Projects:
-#3 Migration (Move, Copy, Archive Jobs)
-#7 Single Job Writing to Multiple Storage Devices
-- Reserve blocks other restore jobs when first cannot connect
- to SD.
-- Add true/false to conf same as yes/no
-- For Windows disaster recovery see http://unattended.sf.net/
- regardless of the retention period, Bacula will not prune the
last Full, Diff, or Inc File data until a month after the
retention period for the last Full backup that was done.
- In restore don't compare byte count on a raw device -- directory
entry does not contain bytes.
-- To mark files as deleted, run essentially a Verify to disk, and
- when a file is found missing (MarkId != JobId), then create
- a new File record with FileIndex == -1. This could be done
- by the FD at the same time as the backup.
-=== rate design
- jcr->last_rate
- jcr->last_runtime
- MA = (last_MA * 3 + rate) / 4
- rate = (bytes - last_bytes) / (runtime - last_runtime)
+
+
- Max Vols limit in Pool off by one?
- Implement Files/Bytes,... stats for restore job.
- Implement Total Bytes Written, ... for restore job.
- Bug: if a job is manually scheduled to run later, it does not appear
in any status report and cannot be cancelled.
-==== Keeping track of deleted files ====
- My "trick" for keeping track of deletions is the following.
- Assuming the user turns on this option, after all the files
- have been backed up, but before the job has terminated, the
- FD will make a pass through all the files and send their
- names to the DIR (*exactly* the same as what a Verify job
- currently does). This will probably be done at the same
- time the files are being sent to the SD avoiding a second
- pass. The DIR will then compare that to what is stored in
- the catalog. Any files in the catalog but not in what the
- FD sent will receive a catalog File entry that indicates
- that at that point in time the file was deleted.
-
- During a restore, any file initially picked up by some
- backup (Full, ...) then subsequently having a File entry
- marked "delete" will be removed from the tree, so will not
- be restored. If a file with the same name is later OK it
- will be inserted in the tree -- this already happens. All
- will be consistent except for possible changes during the
- running of the FD.
-
- Since I'm on the subject, some of you may be wondering what
- the utility of the in memory tree is if you are going to
- restore everything (at least it comes up from time to time
- on the list). Well, it is still *very* useful because it
- allows only the last item found for a particular filename
- (full path) to be entered into the tree, and thus if a file
- is backed up 10 times, only the last copy will be restored.
- I recently (last Friday) restored a complete directory, and
- the Full and all the Differential and Incremental backups
- spanned 3 Volumes. The first Volume was not even mounted
- because all the files had been updated and hence backed up
- since the Full backup was made. In this case, the tree
- saved me a *lot* of time.
-
- Make sure this information is stored on the tape too so
- that it can be restored directly from the tape.
-
- Comments from Martin Simmons (I think they are all covered):
- Ok, that should cover the basics. There are few issues though:
-
- - Restore will depend on the catalog. I think it is better to include the
- extra data in the backup as well, so it can be seen by bscan and bextract.
-
- - I'm not sure if it will preserve multiple hard links to the same inode. Or
- maybe adding or removing links will cause the data to be dumped again?
-
- - I'm not sure if it will handle renamed directories. Possibly it will work
- by dumping the whole tree under a renamed directory?
-
- - It remains to be seen how the backup performance of the DIR's will be
- affected when comparing the catalog for a large filesystem.
+
+====
+From David:
+How about introducing a Type = MgmtPolicy job type? That job type would
+be responsible for scanning the Bacula environment looking for specific
+conditions, and submitting the appropriate jobs for implementing said
+policy, eg:
+
+Job {
+ Name = "Migration-Policy"
+ Type = MgmtPolicy
+ Policy Selection Job Type = Migrate
+ Scope = "<keyword> <operator> <regexp>"
+ Threshold = "<keyword> <operator> <regexp>"
+ Job Template = <template-name>
+}
+
+Where <keyword> is any legal job keyword, <operator> is a comparison
+operator (=,<,>,!=, logical operators AND/OR/NOT) and <regexp> is a
+appropriate regexp. I could see an argument for Scope and Threshold
+being SQL queries if we want to support full flexibility. The
+Migration-Policy job would then get scheduled as frequently as a site
+felt necessary (suggested default: every 15 minutes).
+
+Example:
+
+Job {
+ Name = "Migration-Policy"
+ Type = MgmtPolicy
+ Policy Selection Job Type = Migration
+ Scope = "Pool=*"
+ Threshold = "Migration Selection Type = LowestUtil"
+ Job Template = "MigrationTemplate"
+}
+
+would select all pools for examination and generate a job based on
+MigrationTemplate to automatically select the volume with the lowest
+usage and migrate it's contents to the nextpool defined for that pool.
+
+This policy abstraction would be really handy for adjusting the behavior
+of Bacula according to site-selectable criteria (one thing that pops
+into mind is Amanda's ability to automatically adjust backup levels
+depending on various criteria).
+
=====
in a Job Resource that after this certain job is run, the Volume State
should be set to "Volume State = Used", this give more flexibility (IMHO).
-6. Localization of Bacula Messages
-
- Why:
- Unfortunatley many,many people I work with don't speak english very well.
- So if at least the Reporting messages would be localized then they
- would understand that they have to change the tape,etc. etc.
-
- I volunteer to do the german translations, and if I can convince my wife also
- french and Morre (western african language).
-
7. OK, this is evil, probably bound to security risks and maybe not possible
due to the design of bacula.
format string. Then I have the tape labeled automatically with weekday
name in the correct language.
==========
-- Yes, that is surely the case. I probably should turn those into Warning
- errors. In addition, you just made me think that it might not be bad to
- add an option to check the file size after backing up the file and
- report if it changes. This would be done as an option because it would
- add extra overhead.
-
- Kern, good idea. If you do do that, mention in the output: file
- shrunk, or file expanded, just to make it obvious to the user
- (without having to the refer to file size), just how the file size
- changed.
-
- Would this option be for all file, or just one file? Or a fileset?
- Make output from status use html table tags for nicely
presenting in a browser.
-- Can one write tapes faster with 8192 byte block sizes?
-- Document security problems with the same password for everyone in
- rpm and Win32 releases.
- Browse generations of files.
- I've seen an error when my catalog's File table fills up. I
then have to recreate the File table with a larger maximum row
http://dev.mysql.com/doc/mysql/en/Full_table.html ; I think the
"Installing and Configuring MySQL" chapter should talk a bit
about this potential problem, and recommend a solution.
-- For Solaris must use POSIX awk.
- Want speed of writing to tape while despooling.
- Supported autochanger:
OS: Linux
- Use only shell tools no make in CDROM package.
- Include within include does it work?
- Implement a Pool of type Cleaning?
-- Implement VolReadTime and VolWriteTime in SD
-- Modify Backing up Your Database to include a bootstrap file.
- Think about making certain database errors fatal.
- Look at correcting the time jump in the scheduler for daylight
savings time changes.
-- Add a "real" timer to network connections.
-- Promote to Full = Time period
- Check dates entered by user for correctness (month/day/... ranges)
- Compress restore Volume listing by date and first file.
- Look at patches/bacula_db.b2z postgresql that loops during restore.
See Gregory Wright.
- Perhaps add read/write programs and/or plugins to FileSets.
- How to handle backing up portables ...
-- Add some sort of guaranteed Interval for upgrading jobs.
-- Can we write the state file after every job terminates? On Win32
- the system crashes and the state file is not updated.
- Limit bandwidth
Documentation to do: (any release a little bit at a time)
- Use gather write() for network I/O.
- Autorestart on crash.
- Add bandwidth limiting.
-- Add acks every once and a while from the SD to keep
- the line from timing out.
- When an error in input occurs and conio beeps, you can back
up through the prompt.
- Detect fixed tape block mode during positioning by looking at
block numbers in btape "test". Possibly adjust in Bacula.
- Fix list volumes to output volume retention in some other
units, perhaps via a directive.
-- If opening a tape in read/write mode fails attempt to open
- it in read-only mode, and mark the tape for read only.
-- Allow Simultaneous Priorities = yes => run up to Max concurrent jobs even
- with multiple priorities.
- If you use restore replace=never, the directory attributes for
non-existent directories will not be restored properly.
- see lzma401.zip in others directory for new compression
algorithm/library.
-- Minimal autochanger handling in Bacula and in btape.
-- Look into how tar does not save sockets and the possiblity of
- not saving them in Bacula (Martin Simmons reported this).
-- Fix restore jobs so that multiple jobs can run if they
- are not using the same tape(s).
- Allow the user to select JobType for manual pruning/purging.
- bscan does not put first of two volumes back with all info in
bscan-test.
-- Implement the FreeBSD nodump flag in chflags.
- Figure out how to make named console messages go only to that
console and to the non-restricted console (new console class?).
- Make restricted console prompt for password if *ask* is set or
-> maybe its more easy to maintain this, if the
descriptions of that commands are outsourced to
a ceratin-file
-- the cd-command should allow complete paths
- i.e. cd /foo/bar/foo/bar
- -> if a customer mails me the path to a certain file,
- its faster to enter the specified directory
- if the password is not configured in bconsole.conf
you should be asked for it.
-> sometimes you like to do restore on a customer-machine
are not restored. See bug 213. To fix this requires creating a
list of newly restored directories so that those directory
permissions *can* be restored.
-- Compaction of Disk space by "migrating" Volumes that have pruned
- Jobs (what criteria? size, #jobs, time).
- Add prune all command
- Document fact that purge can destroy a part of a restore by purging
one volume while others remain valid -- perhaps mark Jobs.
- Add tree pane to left of window.
- Add progress meter.
- Max wait time or max run time causes seg fault -- see runtime-bug.txt
-- Document writing to a CD/DVD with Bacula.
-- Add a "base" package to the window installer for pthreadsVCE.dll
- which is needed by all packages.
- Add message to user to check for fixed block size when the forward
space test fails in btape.
- When unmarking a directory check if all files below are unmarked and
- Setup lrrd graphs: (http://www.linpro.no/projects/lrrd/) Mike Acar.
- Revisit the question of multiple Volumes (disk) on a single device.
- Add a block copy option to bcopy.
-- Investigate adding Mac Resource Forks.
-- Finish work on Gnome restore GUI.
- Fix "llist jobid=xx" where no fileset or client exists.
- For each job type (Admin, Restore, ...) require only the really necessary
fields.- Pass Director resource name as an option to the Console.
- Add a "batch" mode to the Console (no unsolicited queries, ...).
-- Add a .list all files in the restore tree (probably also a list all files)
- Do both a long and short form.
- Allow browsing the catalog to see all versions of a file (with
stat data on each file).
- Restore attributes of directory if replace=never set but directory
- Check new HAVE_WIN32 open bits.
- Check if the tape has moved before writing.
- Handling removable disks -- see below:
-- Keep track of tape use time, and report when cleaning is necessary.
- Add FromClient and ToClient keywords on restore command (or
BackupClient RestoreClient).
- Implement a JobSet, which groups any number of jobs. If the
JobSet is started, all the jobs are started together.
Allow Pool, Level, and Schedule overrides.
-- Enhance cancel to timeout BSOCK packets after a specific delay.
-- Do scheduling by UTC using gmtime_r() in run_conf, scheduler, and
- ua_status.!!! Thanks to Alan Brown for this tip.
- Look at updating Volume Jobs so that Max Volume Jobs = 1 will work
correctly for multiple simultaneous jobs.
-- Correct code so that FileSet MD5 is calculated for < and | filename
- generation.
- Implement the Media record flag that indicates that the Volume does disk
addressing.
-- Implement VolAddr, which is used when Volume is addressed like a disk,
- and form it from VolFile and VolBlock.
-- Make multiple restore jobs for multiple media types specifying
- the proper storage type.
- Fix fast block rejection (stored/read_record.c:118). It passes a null
pointer (rec) to try_repositioning().
-- Look at extracting Win data from BackupRead.
- Implement RestoreJobRetention? Maybe better "JobRetention" in a Job,
which would take precidence over the Catalog "JobRetention".
- Implement Label Format in Add and Label console commands.
-- Possibly up network buffers to 65K. Put on variable.
- Put email tape request delays on one or more variables. User wants
to cancel the job after a certain time interval. Maximum Mount Wait?
- Job, Client, Device, Pool, or Volume?
it's pushing toward heterogeneous systems capability
big things:
Macintosh file client
- macs are an interesting niche, but I fear a server is a rathole
working bare iron recovery for windows
the option for inc/diff backups not reset on fileset revision
a) use both change and inode update time against base time
an integration guide
or how to get at fancy things that one could do with bacula
logwatch code for bacula logs (or similar)
- linux distro inclusion of bacula (brings good and bad, but necessary)
- win2k/XP server capability (icky but you asked)
support for Oracle database ??
===
- Look at adding SQL server and Exchange support for Windows.
-- Make dev->file and dev->block_num signed integers so that -1 can
- be an invalid value which happens with BSR.
-- Create VolAddr for disk files in place of VolFile and VolBlock. This
- is needed to properly specify ranges.
- Add progress of files/bytes to SD and FD.
-- Print warning message if FileId > 4 billion
- do a "messages" before the first prompt in Console
- Client does not show busy during Estimate command.
- Implement Console mtx commands.
- Implement some way for the File daemon to contact the Director
to start a job or pass its DHCP obtained IP number.
- Implement a query tape prompt/replace feature for a console
-- Copy console @ code to gnome2-console
-- Make AES the only encryption algorithm see
- http://csrc.nist.gov/CryptoToolkit/aes/). It's
- an officially adopted standard, has survived peer
- review, and provides keys up to 256 bits.
-- Take a careful look at SetACL http://setacl.sourceforge.net
-- Make tree walk routines like cd, ls, ... more user friendly
- by handling spaces better.
- Make sure that Bacula rechecks the tape after the 20 min wait.
- Set IO_NOWAIT on Bacula TCP/IP packets.
- Try doing a raw partition backup and restore by mounting a
in the "short" pool to the "long" pool if this pool runs out of volume
space?
- What to do about "list files job=xxx".
-- Get and test MySQL 4.0
- Look at how fuser works and /proc/PID/fd that is how Nic found the
file descriptor leak in Bacula.
-- Implement WrapCounters in Counters.
-- Add heartbeat from FD to SD if hb interval expires.
- Can we dynamically change FileSets?
- If pool specified to label command and Label Format is specified,
automatically generate the Volume name.
-- Why can't SQL do the filename sort for restore?
- Add ExhautiveRestoreSearch
- Look at the possibility of loading only the necessary
data into the restore tree (i.e. do it one directory at a
run the job but don't save the files.
- Make things like list where a file is saved case independent for
Windows.
-- Implement migrate
-- Use autochanger to handle multiple devices.
-- On Windows with very long path names, it may be impossible to create
- a file (and thus restore it) because the total length is too long.
- We must cd into the directory then create the file without the
- full path name.
- Implement a Recycle command
-- Test a second language e.g. french.
-- Start working on Base jobs.
-- Implement UnsavedFiles DB record.
- From Phil Stracchino:
It would probably be a per-client option, and would be called
something like, say, "Automatically purge obsoleted jobs". What it
- If SD cannot open a drive, make it periodically retry.
- Add more of the config info to the tape label.
-- If tape is marked read-only, then try opening it read-only rather than
- failing, and remember that it cannot be written.
- Refine SD waiting output:
Device is being positioned
> Device is being positioned for append
- Figure out some way to estimate output size and to avoid splitting
a backup across two Volumes -- this could be useful for writing CDROMs
where you really prefer not to have it split -- not serious.
-- Have SD compute MD5 or SHA1 and compare to what FD computes.
-- Make VolumeToCatalog calculate an MD5 or SHA1 from the
- actual data on the Volume and compare it.
-- Implement Bacula plugins -- design API
- Make bcopy read through bad tape records.
- Program files (i.e. execute a program to read/write files).
Pass read date of last backup, size of file last time.
- bscan without -v is too quiet -- perhaps show jobs.
- Add code to reject whole blocks if not wanted on restore.
- Check if we can increase Bacula FD priorty in Win2000
-- Make sure the MaxVolFiles is fully implemented in SD
- Check if both CatalogFiles and UseCatalog are set to SD.
- Possibly add email to Watchdog if drive is unmounted too
long and a job is waiting on the drive.
- Compare tape to Client files (attributes, or attributes and data)
- Make all database Ids 64 bit.
- Allow console commands to detach or run in background.
-- Fix status delay on storage daemon during rewind.
- Add SD message variables to control operator wait time
- Maximum Operator Wait
- Minimum Message Interval
- Implement script driven addition of File daemon to config files.
- Think about how to make Bacula work better with File (non-tape) archives.
- Write Unix emulator for Windows.
-- Put memory utilization in Status output of each daemon
- if full status requested or if some level of debug on.
- Make database type selectable by .conf files i.e. at runtime
- Set flag for uname -a. Add to Volume label.
- Restore files modified after date
- MaxWarnings
- MaxErrors (job?)
=====
-- FD sends unsaved file list to Director at end of job (see
- RFC below).
-- File daemon should build list of files skipped, and then
- at end of save retry and report any errors.
- Write a Storage daemon that uses pipes and
standard Unix programs to write to the tape.
See afbackup.
- Need something that monitors the JCR queue and
times out jobs by asking the deamons where they are.
-- Enhance Jmsg code to permit buffering and saving to disk.
-- device driver = "xxxx" for drives.
- Verify from Volume
-- Ensure that /dev/null works
- Need report class for messages. Perhaps
report resource where report=group of messages
- enhance scan_attrib and rename scan_jobtype, and
with media robots, but are a pain for shops with manual media
mounting.
->
-> Base jobs sound pretty useful, but I'm not dying for them.
-
-Nobody is dying for them, but when you see what it does, you will die
-without it.
-
-3. Restoring deleted files: Since I think my comments in (2) above
-have low probability of implementation, I'll also suggest that you
-could approach the issue of deleted files by a mechanism of having the
-fd report to the dir, a list of all files on the client for every
-backup job. The dir could note in the database entry for each file
-the date that the file was seen. Then if a restore as of date X takes
-place, only files that exist from before X until after X would be
-restored. Probably the major cost here is the extra date container in
-each row of the files table.
-
-Thanks for "listening". I hope some of this helps. If you want to
-contact me, please send me an email - I read some but not all of the
-mailing list traffic and might miss a reply there.
-
-Please accept my compliments for bacula. It is doing a great job for
-me!! I sympathize with you in the need to wrestle with excelence in
-execution vs. excelence in feature inclusion.
-
Regards,
Jerry Schieffer
==============================
Longer term to do:
-- Design at hierarchial storage for Bacula. Migration and Clone.
-- Implement FSM (File System Modules).
- Audit M_ error codes to ensure they are correct and consistent.
- Add variable break characters to lex analyzer.
Either a bit mask or a string of chars so that
continue a save if the Director goes down (this
is NOT currently the case). Must detect socket error,
buffer messages for later.
-- Enhance time/duration input to allow multiple qualifiers e.g. 3d2h
- Add ability to backup to two Storage devices (two SD sessions) at
the same time -- e.g. onsite, offsite.
-- Add the ability to consolidate old backup sets (basically do a restore
- to tape and appropriately update the catalog). Compress Volume sets.
- Might need to spool via file is only one drive is available.
-- Compress or consolidate Volumes of old possibly deleted files. Perhaps
- someway to do so with every volume that has less than x% valid
- files.
+======================================================
-Migration: Move a backup from one Volume to another
-Clone: Copy a backup -- two Volumes
+====
+ Handling removable disks
-Bacula Migration is based on Jobs (apparently Networker is file by file).
+ From: Karl Cunningham <karlc@keckec.com>
-Migration triggered by:
- Number of Jobs
- Number of Volumes
- Age of Jobs
- Highwater mark (keep total size)
- Lowwater mark
-
+ My backups are only to hard disk these days, in removable bays. This is my
+ idea of how a backup to hard disk would work more smoothly. Some of these
+ things Bacula does already, but I mention them for completeness. If others
+ have better ways to do this, I'd like to hear about it.
+
+ 1. Accommodate several disks, rotated similar to how tapes are. Identified
+ by partition volume ID or perhaps by the name of a subdirectory.
+ 2. Abort & notify the admin if the wrong disk is in the bay.
+ 3. Write backups to different subdirectories for each machine to be backed
+ up.
+ 4. Volumes (files) get created as needed in the proper subdirectory, one
+ for each backup.
+ 5. When a disk is recycled, remove or zero all old backup files. This is
+ important as the disk being recycled may be close to full. This may be
+ better done manually since the backup files for many machines may be
+ scattered in many subdirectories.
+====
-======================================================
+=== Done
+
+===
Base Jobs design
It is somewhat like a Full save becomes an incremental since
the Base job (or jobs) plus other non-base files.
This would avoid the need to explicitly fetch each File record for
the Base job. The Base Job record will be fetched to get the
VolSessionId and VolSessionTime.
-=========================================================
-
-
-==========================================================
- Unsaved File design
-For each Incremental job that is run, there may be files that
-were found but not saved because they were locked (this applies
-only to Windows). Such a system could send back to the Director
-a list of Unsaved files.
-Need:
-- New UnSavedFiles table that contains:
- JobId
- PathId
- FilenameId
-- Then in the next Incremental job, the list of Unsaved Files will be
- feed to the FD, who will ensure that they are explicitly chosen even
- if standard date/time check would not have selected them.
-=============================================================
-
-
-=====
- Multiple drive autochanger data: see Alan Brown
- mtx -f xxx unloadStorage Element 1 is Already Full(drive 0 was empty)
- Unloading Data Transfer Element into Storage Element 1...source Element
- Address 480 is Empty
-
- (drive 0 was empty and so was slot 1)
- > mtx -f xxx load 15 0
- no response, just returns to the command prompt when complete.
- > mtx -f xxx status Storage Changer /dev/changer:2 Drives, 60 Slots ( 2 Import/Export )
- Data Transfer Element 0:Full (Storage Element 15 Loaded):VolumeTag = HX001
- Data Transfer Element 1:Empty
- Storage Element 1:Empty
- Storage Element 2:Full :VolumeTag=HX002
- Storage Element 3:Full :VolumeTag=HX003
- Storage Element 4:Full :VolumeTag=HX004
- Storage Element 5:Full :VolumeTag=HX005
- Storage Element 6:Full :VolumeTag=HX006
- Storage Element 7:Full :VolumeTag=HX007
- Storage Element 8:Full :VolumeTag=HX008
- Storage Element 9:Full :VolumeTag=HX009
- Storage Element 10:Full :VolumeTag=HX010
- Storage Element 11:Empty
- Storage Element 12:Empty
- Storage Element 13:Empty
- Storage Element 14:Empty
- Storage Element 15:Empty
- Storage Element 16:Empty....
- Storage Element 28:Empty
- Storage Element 29:Full :VolumeTag=CLNU01L1
- Storage Element 30:Empty....
- Storage Element 57:Empty
- Storage Element 58:Full :VolumeTag=NEX261L2
- Storage Element 59 IMPORT/EXPORT:Empty
- Storage Element 60 IMPORT/EXPORT:Empty
- $ mtx -f xxx unload
- Unloading Data Transfer Element into Storage Element 15...done
-
- (just to verify it remembers where it came from, however it can be
- overrriden with mtx unload {slotnumber} to go to any storage slot.)
- Configuration wise:
- There needs to be a table of drive # to devices somewhere - If there are
- multiple changers or drives there may not be a 1:1 correspondance between
- changer drive number and system device name - and depending on the way the
- drives are hooked up to scsi busses, they may not be linearly numbered
- from an offset point either.something like
-
- Autochanger drives = 2
- Autochanger drive 0 = /dev/nst1
- Autochanger drive 1 = /dev/nst2
- IMHO, it would be _safest_ to use explicit mtx unload commands at all
- times, not just for multidrive changers. For a 1 drive changer, that's
- just:
-
- mtx load xx 0
- mtx unload xx 0
-
- MTX's manpage (1.2.15):
- unload [<slotnum>] [ <drivenum> ]
- Unloads media from drive <drivenum> into slot
- <slotnum>. If <drivenum> is omitted, defaults to
- drive 0 (as do all commands). If <slotnum> is
- omitted, defaults to the slot that the drive was
- loaded from. Note that there's currently no way
- to say 'unload drive 1's media to the slot it
- came from', other than to explicitly use that
- slot number as the destination.AB
-====
-
-====
-SCSI info:
-FreeBSD
-undef# camcontrol devlist
-<WANGTEK 51000 SCSI M74H 12B3> at scbus0 target 2 lun 0 (pass0,sa0)
-<ARCHIVE 4586XX 28887-XXX 4BGD> at scbus0 target 4 lun 0 (pass1,sa1)
-<ARCHIVE 4586XX 28887-XXX 4BGD> at scbus0 target 4 lun 1 (pass2)
-
-tapeinfo -f /dev/sg0 with a bad tape in drive 1:
-[kern@rufus mtx-1.2.17kes]$ ./tapeinfo -f /dev/sg0
-Product Type: Tape Drive
-Vendor ID: 'HP '
-Product ID: 'C5713A '
-Revision: 'H107'
-Attached Changer: No
-TapeAlert[3]: Hard Error: Uncorrectable read/write error.
-TapeAlert[20]: Clean Now: The tape drive neads cleaning NOW.
-MinBlock:1
-MaxBlock:16777215
-SCSI ID: 5
-SCSI LUN: 0
-Ready: yes
-BufferedMode: yes
-Medium Type: Not Loaded
-Density Code: 0x26
-BlockSize: 0
-DataCompEnabled: yes
-DataCompCapable: yes
-DataDeCompEnabled: yes
-CompType: 0x20
-DeCompType: 0x0
-Block Position: 0
-=====
-
-====
- Handling removable disks
-
- From: Karl Cunningham <karlc@keckec.com>
-
- My backups are only to hard disk these days, in removable bays. This is my
- idea of how a backup to hard disk would work more smoothly. Some of these
- things Bacula does already, but I mention them for completeness. If others
- have better ways to do this, I'd like to hear about it.
-
- 1. Accommodate several disks, rotated similar to how tapes are. Identified
- by partition volume ID or perhaps by the name of a subdirectory.
- 2. Abort & notify the admin if the wrong disk is in the bay.
- 3. Write backups to different subdirectories for each machine to be backed
- up.
- 4. Volumes (files) get created as needed in the proper subdirectory, one
- for each backup.
- 5. When a disk is recycled, remove or zero all old backup files. This is
- important as the disk being recycled may be close to full. This may be
- better done manually since the backup files for many machines may be
- scattered in many subdirectories.
-====
-
-
-=== Done
-- Save mount point for directories not traversed with onefs=yes.
-- Add seconds to start and end times in the Job report output.
-- if 2 concurrent backups are attempted on the same tape
- drive (autoloader) into different tape pools, one of them will exit
- fatally instead of halting until the drive is idle
-- Update StartTime if job held in Job Queue.
-- Look at www.nu2.nu/pebuilder as a helper for full windows
- bare metal restore. (done by Scott)
-- Fix orphanned buffers:
- Orphaned buffer: 24 bytes allocated at line 808 of rufus-dir job.c
- Orphaned buffer: 40 bytes allocated at line 45 of rufus-dir alist.c
-- Implement Preben's suggestion to add
- File System Types = ext2, ext3
- to FileSets, thus simplifying backup of *all* local partitions.
-- Try to open a device on each Job if it was not opened
- when the SD started.
-- Add dump of VolSessionId/Time and FileIndex with bls.
-- If Bacula does not find the right tape in the Autochanger,
- then mark the tape in error and move on rather than asking
- for operator intervention.
-- Cancel command should include JobId in list of Jobs.
-- Add performance testing hooks
-- Bootstrap from JobMedia records.
-- Implement WildFile and WildDir to solve problem of
- saving only *.doc files.
-- Fix
- Please use the "label" command to create a new Volume for:
- Storage: DDS-4-changer
- Media type:
- Pool: Default
- label
- The defined Storage resources are:
-- Copy Changer Device and Changer Command from Autochanger
- to Device resource in SD if none given in Device resource.
-- 1. Automatic use of more than one drive in an autochanger (done)
-- 2. Automatic selection of the correct drive for each Job (i.e.
- selects a drive with an appropriate Volume for the Job) (done)
-- 6. Allow multiple simultaneous Jobs referencing the same pool write
- to several tapes (some new directive(s) are are probably needed for
- this) (done)
-- Locking (done)
-- Key on Storage rather than Pool (done)
-- Allow multiple drives to use same Pool (change jobq.c DIR) (done).
-- Synchronize multiple drives so that not more
- than one loads a tape and any time (done)
-- 4. Use Changer Device and Changer Command specified in the
- Autochanger resource, if none is found in the Device resource.
- You can continue to specify them in the Device resource if you want
- or need them to be different for each device.
-- 5. Implement a new Device directive (perhaps "Autoselect = yes/no")
- that can allow a Device be part of an Autochanger, and hence the changer
- script protected, but if set to no, will prevent the Device from being
- automatically selected from the changer. This allows the device to
- be directly accessed through its Device name, but not through the
- AutoChanger name.
-#6 Select one from among Multiple Storage Devices for Job
-#5 Events that call a Python program
- (Implemented in Dir/SD)
-- Make sure the Device name is in the Query packet returned.
-- Don't start a second file job if one is already running.
-- Implement EOF/EOV labels for ANSI labels
-- Implement IBM labels.
-- When Python creates a new label, the tape is immediately
- recycled and no label created. This happens when using
- autolabeling -- even when Python doesn't generate the name.
-- Scratch Pool where the volumes can be re-assigned to any Pool.
-- 28-Mar 23:19 rufus-sd: acquire.c:379 Device "DDS-4" (/dev/nst0)
- is busy reading. Job 6 canceled.
-- Remove separate thread for opening devices in SD. On the other
- hand, don't block waiting for open() for devices.
-- Fix code to either handle updating NumVol or to calculate it in
- Dir next_vol.c
-- Ensure that you cannot exclude a directory or a file explicitly
- Included with File.
-#4 Embedded Python Scripting
- (Implemented in Dir/SD/FD)
-- Add Python writable variable for changing the Priority,
- Client, Storage, JobStatus (error), ...
-- SD Python
- - Solicit Events
-- Add disk seeking on restore; turn off seek on tapes.
- stored/match_bsr.c
-- Look at dird_conf.c:1000: warning: `int size'
- might be used uninitialized in this function
-- Indicate when a Job is purged/pruned during restore.
-- Implement some way to turn off automatic pruning in Jobs.
-- Implement a way an Admin Job can prune, possibly multiple
- clients -- Python script?
-- Look at Preben's acl.c error handling code.
-- SD crashes after a tape restore then doing a backup.
-- If drive is opened read/write, close it and re-open
- read-only if doing a restore, and vice-versa.
-- Windows restore:
- data-fd: RestoreFiles.2004-12-07_15.56.42 Error:
- > ..\findlib\../../findlib/create_file.c:275 Could not open e:/: ERR=Der
- > Prozess kann nicht auf die Datei zugreifen, da sie von einem anderen
- > Prozess verwendet wird.
- Restore restores all files, but then fails at the end trying
- to set the attributes of e:
- from failed jobs.- Resolve the problem between Device name and Archive name,
- and fix SD messages.
-- Tell the "restore" user when browsing is no longer possible.
-- Add a restore directory-x
-- Write non-optimized bsrs from the JobMedia and Media records,
- even after Files are pruned.
-- Delete Stripe and Copy from VolParams to save space.
-- Fix option 2 of restore -- list where file is backed up -- require Client,
- then list last 20 backups.
-- Finish implementation of passing all Storage and Device needs to
- the SD.
-- Move test for max wait time exceeded in job.c up -- Peter's idea.
-## Consider moving docs to their own project.
-## Move rescue to its own project.
-- Add client version to the Client name line that prints in
- the Job report.
-- Fix the Rescue CDROM.
-- By the way: on page http://www.bacula.org/?page=tapedrives , at the
- bottom, the link to "Tape Testing Chapter" is broken. It goes to
- /html-manual/... while the others point to /rel-manual/...
-- Device resource needs the "name" of the SD.
-- Specify a single directory to restore.
-- Implement MediaType keyword in bsr?
-- Add a date and time stamp at the beginning of every line in the
- Job report (Volker Sauer).
-- Add level to estimate command.
-- Add "limit=n" for "list jobs"
-- Make bootstrap filename unique.
-- Make Dmsg look at global before calling subroutine.
-- From Chris Hull:
- it seems to be complaining about 12:00pm which should be a valid 12
- hour time. I changed the time to 11:59am and everything works fine.
- Also 12:00am works fine. 0:00pm also works (which I don't think
- should). None of the values 12:00pm - 12:59pm work for that matter.
-- Require restore via the restore command or make a restore Job
- get the bootstrap file.
-- Implement Maximum Job Spool Size
-- Fix 3993 error in SD. It forgets to look at autochanger
- resource for device command, ...
-- 3. Prevent two drives requesting the same Volume in any given
- autochanger, by checking if a Volume is mounted on another drive
- in an Autochanger.
-- Upgrade to MySQL 4.1.12 See:
- http://dev.mysql.com/doc/mysql/en/Server_SQL_mode.html
-- Add # Job Level date to bsr file
-- Implement "PreferMountedVolumes = yes|no" in Job resource.
-## Integrate web-bacula into a new Bacula project with
- bimagemgr.
-- Cleaning tapes should have Status "Cleaning" rather than append.
-- Make sure that Python has access to Client address/port so that
- it can check if Clients are alive.
-- Review all items in "restore".
-- Fix PostgreSQL GROUP BY problems in restore.
-- Fix PostgreSQL sql problems in bugs.
-- After rename
- 04-Jul 13:01 MainSD: Rufus.2005-07-04_01.05.02 Warning: Director wanted Volume
- "DLT-13Feb04".
- Current Volume "DLT-04Jul05" not acceptable because:
- 1997 Volume "DLT-13Feb04" not in catalog.
- 04-Jul 13:01 MainSD: Please mount Volume "DLT-04Jul05" on Storage Device
- "HP DLT 80" (/dev/nst0) for Job Rufus.2005-07-04_01.05.02
-## Create a new GUI chapter explaining all the GUI programs.
-- Make "update slots" when pointing to Autochanger, remove
- all Volumes from other drives. "update slots all-drives"?
- No, this is done by modifying mtx-changer to list what is
- in the drives.
-- Finish TLS implementation.
-- Port limiting -m in iptables to prevent DoS attacks
- could cause broken pipes on Bacula.
-6. Build and test the Volume Shadow Copy (VSS) for Win32.
-- Allow cancel of unknown Job
-- State not saved when closing Win32 FD by icon
-- bsr-opt-test fails. bsr deleted. Fix.
-- Move Python daemon variables from Job to Bacula object.
- WorkingDir, ConfigFile
-- Document that Bootstrap files can be written with cataloging
- turned off.
-- Document details of ANSI/IBM labels
-- OS linux 2.4
- 1) ADIC, DLT, FastStor 4000, 7*20GB
-- Linux Sony LIB-D81, AIT-3 library works.
-- Doc the following
- to activate, check or disable the hardware compression feature on my
- exb-8900 i use the exabyte "MammothTool" you can get it here:
- http://www.exabyte.com/support/online/downloads/index.cfm
- There is a solaris version of this tool. With option -C 0 or 1 you can
- disable or activate compression. Start this tool without any options for
- a small reference.
-- Document Heartbeat Interval in the dealing with firewalls section.
-- Document new CDROM directory.
-- On Win32 working directory must have drive letter ????
-- On Win32 working directory must be writable by SYSTEM to
- do restores.
-- Document that ChangerDevice is used for Alert command.
-- Add better documentation on how restores can be done
-8. Take one more try at making DVD writing work (no go)
-7. Write a bacula-web document
-- Why isn't the DEVICE structure defined when doing
- a reservation?
-- Multi-drive changer seems to only use drive 0
- Multiple drives don't seem to be opened.
-- My database is growing
-- Call GetLastError() in the berrno constructor rather
- than delaying until strerror.
-- Tape xxx in drive 0, requested in drive 1
-- The mount command does not work with drives other than 0.
-- A mount should cause the SD to re-examine what Slot is
- loaded.
-- The SD locks on to the first available drive then
- wants a Volume that is released but in another drive --
- chaos.
-- Run the regression scripts on Solaris and FreeBSD
-- Figure out how to package gui, and rescue programs.
-- Add a .dir command to restore tree code to eliminate the problem
-- Mount after manually unloading changer causes hang in SD
-- Fix JobACL with restore by JobId.
+- Fix bpipe.c so that it does not modify results pointer.
+ ***FIXME*** calling sequence should be changed.
+- Fix restore of acls and extended attributes to count ERROR
+ messages and make errors non-fatal.
+- Put save/restore various platform acl/xattrs on a pointer to simplify
+ the code.
+- Add blast attributes to DIR to SD.
+- Implement unmount of USB volumes.
+- Look into using Dart for testing
+ http://public.kitware.com/Dart/HTML/Index.shtml
projects / bacula / bacula / blobdiff