Kern's ToDo List
- 22 February 2006
+ 20 June 2006
Major development:
Project Developer
- Pruning with Admin job.
- Does WildFile match against full name? Doc.
- %d and %v only valid on Director, not for ClientRunBefore/After.
+- During tests with the 260 char fix code, I found one problem:
+ if the system "sees" a long path once, it seems to forget it's
+ working drive (e.g. c:\), which will lead to a problem during
+ the next job (create bootstrap file will fail). Here is the
+ workaround: specify absolute working and pid directory in
+ bacula-fd.conf (e.g. c:\bacula\working instead of
+ \bacula\working).
Priority:
For 1.39:
+- Make authentication failures single threaded.
+- Make base64.c (bin_to_base64) take a buffer length
+ argument to avoid overruns.
+- Fix catreq.c digestbuf at line 411 in src/dird/catreq.c
+ and verify that other buffers cannot overrun.
+- Implement VolumeState as discussed with Arno.
+- Install man pages
+- Document techniques for restoring large numbers of files.
+- Document setting my.cnf to big file usage.
+- Add example of proper index output to doc.
+ show index from File;
- Fix re-read of last block to check if job has actually written
a block, and check if block was written by a different job
(i.e. multiple simultaneous jobs writing).
[ possibly a Python event -- kes ]
===
+- Mount on an Autochanger with no tape in the drive causes:
+ Automatically selected Storage: LTO-changer
+ Enter autochanger drive[0]: 0
+ 3301 Issuing autochanger "loaded drive 0" command.
+ 3302 Autochanger "loaded drive 0", result: nothing loaded.
+ 3301 Issuing autochanger "loaded drive 0" command.
+ 3302 Autochanger "loaded drive 0", result: nothing loaded.
+ 3902 Cannot mount Volume on Storage Device "LTO-Drive1" (/dev/nst0) because:
+ Couldn't rewind device "LTO-Drive1" (/dev/nst0): ERR=dev.c:678 Rewind error on "LTO-Drive1" (/dev/nst0). ERR=No medium found.
+ 3905 Device "LTO-Drive1" (/dev/nst0) open but no Bacula volume is mounted.
+ If this is not a blank tape, try unmounting and remounting the Volume.
+- If Drive 0 is blocked, and drive 1 is set "Autoselect=no", drive 1 will
+ be used.
+- Autochanger did not change volumes.
+ select * from Storage;
+ +-----------+-------------+-------------+
+ | StorageId | Name | AutoChanger |
+ +-----------+-------------+-------------+
+ | 1 | LTO-changer | 0 |
+ +-----------+-------------+-------------+
+ 05-May 03:50 roxie-sd: 3302 Autochanger "loaded drive 0", result is Slot 11.
+ 05-May 03:50 roxie-sd: Tibs.2006-05-05_03.05.02 Warning: Director wanted Volume "LT
+ Current Volume "LT0-002" not acceptable because:
+ 1997 Volume "LT0-002" not in catalog.
+ 05-May 03:50 roxie-sd: Tibs.2006-05-05_03.05.02 Error: Autochanger Volume "LT0-002"
+ Setting InChanger to zero in catalog.
+ 05-May 03:50 roxie-dir: Tibs.2006-05-05_03.05.02 Error: Unable to get Media record
+
+ 05-May 03:50 roxie-sd: Tibs.2006-05-05_03.05.02 Fatal error: Error getting Volume i
+ 05-May 03:50 roxie-sd: Tibs.2006-05-05_03.05.02 Fatal error: Job 530 canceled.
+ 05-May 03:50 roxie-sd: Tibs.2006-05-05_03.05.02 Fatal error: spool.c:249 Fatal appe
+ 05-May 03:49 Tibs: Tibs.2006-05-05_03.05.02 Fatal error: c:\cygwin\home\kern\bacula
+ , got
+ (missing)
+ llist volume=LTO-002
+ MediaId: 6
+ VolumeName: LTO-002
+ Slot: 0
+ PoolId: 1
+ MediaType: LTO-2
+ FirstWritten: 2006-05-05 03:11:54
+ LastWritten: 2006-05-05 03:50:23
+ LabelDate: 2005-12-26 16:52:40
+ VolJobs: 1
+ VolFiles: 0
+ VolBlocks: 1
+ VolMounts: 0
+ VolBytes: 206
+ VolErrors: 0
+ VolWrites: 0
+ VolCapacityBytes: 0
+ VolStatus:
+ Recycle: 1
+ VolRetention: 31,536,000
+ VolUseDuration: 0
+ MaxVolJobs: 0
+ MaxVolFiles: 0
+ MaxVolBytes: 0
+ InChanger: 0
+ EndFile: 0
+ EndBlock: 0
+ VolParts: 0
+ LabelType: 0
+ StorageId: 1
+
+ Note VolStatus is blank!!!!!
+ llist volume=LTO-003
+ MediaId: 7
+ VolumeName: LTO-003
+ Slot: 12
+ PoolId: 1
+ MediaType: LTO-2
+ FirstWritten: 0000-00-00 00:00:00
+ LastWritten: 0000-00-00 00:00:00
+ LabelDate: 2005-12-26 16:52:40
+ VolJobs: 0
+ VolFiles: 0
+ VolBlocks: 0
+ VolMounts: 0
+ VolBytes: 1
+ VolErrors: 0
+ VolWrites: 0
+ VolCapacityBytes: 0
+ VolStatus: Append
+ Recycle: 1
+ VolRetention: 31,536,000
+ VolUseDuration: 0
+ MaxVolJobs: 0
+ MaxVolFiles: 0
+ MaxVolBytes: 0
+ InChanger: 0
+ EndFile: 0
+ EndBlock: 0
+ VolParts: 0
+ LabelType: 0
+ StorageId: 1
+===
+ mount
+ Automatically selected Storage: LTO-changer
+ Enter autochanger drive[0]: 0
+ 3301 Issuing autochanger "loaded drive 0" command.
+ 3302 Autochanger "loaded drive 0", result: nothing loaded.
+ 3301 Issuing autochanger "loaded drive 0" command.
+ 3302 Autochanger "loaded drive 0", result: nothing loaded.
+ 3902 Cannot mount Volume on Storage Device "LTO-Drive1" (/dev/nst0) because:
+ Couldn't rewind device "LTO-Drive1" (/dev/nst0): ERR=dev.c:678 Rewind error on "LTO-Drive1" (/dev/nst0). ERR=No medium found.
+
+ 3905 Device "LTO-Drive1" (/dev/nst0) open but no Bacula volume is mounted.
+ If this is not a blank tape, try unmounting and remounting the Volume.
+
+- Add VolumeState (enable, disable, archive)
+- Add VolumeLock to prevent all but lock holder (SD) from updating
+ the Volume data (with the exception of VolumeState).
+- The btape fill command does not seem to use the Autochanger
+- Make Windows installer default to system disk drive.
+- Look at using ioctl(FIOBMAP, ...) on Linux, and
+ DeviceIoControl(..., FSCTL_QUERY_ALLOCATED_RANGES, ...) on
+ Win32 for sparse files.
+ http://www.flexhex.com/docs/articles/sparse-files.phtml
+ http://www.informatik.uni-frankfurt.de/~loizides/reiserfs/fibmap.html
+- Directive: at <event> "command"
+- Command: pycmd "command" generates "command" event. How to
+ attach to a specific job?
- Integrate Christopher's St. Bernard code.
- run_cmd() returns int should return JobId_t
- get_next_jobid_from_list() returns int should return JobId_t
accept time qualifiers.
- Does ClientRunAfterJob fail the job on a bad return code?
- Make hardlink code at line 240 of find_one.c use binary search.
+- Add ACL error messages in src/filed/acl.c.
projects / bacula / bacula / blobdiff