Kern's ToDo List
- 22 February 2005
+ 20 May 2005
Major development:
Project Developer
======= =========
-IPv6_2 Meno Abels
+TLS Landon Fuller
+Unicode in Win32 Thorsten Engel (done)
+VSS Thorsten Engel (being implemented)
Version 1.37 Kern (see below)
========================================================
1.37 Major Projects:
#3 Migration (Move, Copy, Archive Jobs)
-#4 Embedded Python Scripting
- (Implemented in Dir/SD)
-#5 Events that call a Python program
- (Implemented in Dir/SD)
-#6 Select one from among Multiple Storage Devices for Job
+ (probably not this version)
#7 Single Job Writing to Multiple Storage Devices
+ (probably not this version)
## Integrate web-bacula into a new Bacula project with
bimagemgr.
-## Consider moving docs to their own project.
-
-Suggestions for Preben:
-- Look at adding Client run command that will use the
- port opened by the client.
-- Optimized bootstrap.
+## Create a new GUI chapter explaining all the GUI programs.
Autochangers:
-- Fix
- Please use the "label" command to create a new Volume for:
- Storage: DDS-4-changer
- Media type:
- Pool: Default
- label
- The defined Storage resources are:
-- Copy Changer Device and Changer Command from Autochanger
- to Device resource in SD if none given in Device resource.
+- 3. Prevent two drives requesting the same Volume in any given
+ autochanger, by checking if a Volume is mounted on another drive
+ in an Autochanger.
+- 7. Implement new Console commands to allow offlining/reserving drives,
+ and possibly manipulating the autochanger (much asked for).
+- Make "update slots" when pointing to Autochanger, remove
+ all Volumes from other drives. "update slots all-drives"?
+
+Document:
+- Document that Bootstrap files can be written with cataloging
+ turned off.
+- Pruning with Admin job.
+- Add better documentation on how restores can be done
+- OS linux 2.4
+ 1) ADIC, DLT, FastStor 4000, 7*20GB
+ 2) Sun, DDS, (Suns name unknown - Archive Python DDS drive), 1.2GB
+ 3) Wangtek, QIC, 6525ES, 525MB (fixed block size 1k, block size etc.
+ driver dependent - aic7xxx works, ncr53c8xx with problems)
+ 4) HP, DDS-2, C1553A, 6*4GB
- Doc the following
to activate, check or disable the hardware compression feature on my
exb-8900 i use the exabyte "MammothTool" you can get it here:
There is a solaris version of this tool. With option -C 0 or 1 you can
disable or activate compression. Start this tool without any options for
a small reference.
-- 3.Prevent two drives requesting the same Volume in any given
- autochanger.
-- 4. Use Changer Device and Changer Command specified in the
- Autochanger resource, if none is found in the Device resource.
- You can continue to specify them in the Device resource if you want
- or need them to be different for each device.
-- 5. Implement a new Device directive (perhaps "Autoselect = yes/no")
- that can allow a Device be part of an Autochanger, and hence the changer
- script protected, but if set to no, will prevent the Device from being
- automatically selected from the changer. This allows the device to
- be directly accessed through its Device name, but not through the
- AutoChanger name.
-- 7. Implement new Console commands to allow offlining/reserving drives,
- and possibly manipulating the autochanger (much asked for).
-- 8. Automatic updating of Drive status from SD to DIR when something
- changes (Volume, offline, append, read, ...).
-- 9. Check if a Volume is mounted on another drive in an Autochanger.
-
-
-Autochangers Done:
-- 1. Automatic use of more than one drive in an autochanger (done)
-- 2. Automatic selection of the correct drive for each Job (i.e.
- selects a drive with an appropriate Volume for the Job) (done)
-- 6. Allow multiple simultaneous Jobs referencing the same pool write
- to several tapes (some new directive(s) are are probably needed for
- this) (done)
-- Locking (done)
-- Key on Storage rather than Pool (done)
-- Allow multiple drives to use same Pool (change jobq.c DIR) (done).
-- Synchronize multiple drives so that not more
- than one loads a tape and any time (done)
-
+- Linux Sony LIB-D81, AIT-3 library works.
+- Document PostgreSQL performance problems bug 131.
+- Document testing
+- Document that ChangerDevice is used for Alert command.
+- Document new CDROM directory.
For 1.37:
-- Linux Sony LIB-D81, AIT-3 library works.
-- Device resource needs the "name" of the SD.
-- Add and option to see if the file size changed
- during backup.
-- Implement "update device" from SD so that DIR will
- always have current version of device.
-- Add disk seeking on restore.
-- Add Python writable variable for changing the Priority,
- Client, Storage, JobStatus (error), ...
-- SD Python
- - Solicit Events
-- FD Python
+- From Chris Hull:
+ it seems to be complaining about 12:00pm which should be a valid 12
+ hour time. I changed the time to 11:59am and everything works fine.
+ Also 12:00am works fine. 0:00pm also works (which I don't think
+ should). None of the values 12:00pm - 12:59pm work for that matter.
+=== rate design
+ jcr->last_rate
+ jcr->last_runtime
+ MA = (last_MA * 3 + rate) / 4
+ rate = (bytes - last_bytes) / (runtime - last_runtime)
+- Despool attributes simultaneously with data in a separate
+ thread, rejoined at end of data spooling.
+- Implement Files/Bytes,... stats for restore job.
+- Implement Total Bytes Written, ... for restore job.
+- Add setting Volume State via Python.
+- Upgrade to MySQL 4.1.1 See:
+ http://dev.mysql.com/doc/mysql/en/Server_SQL_mode.html
+- Max Vols limit in Pool off by one?
+- Require restore via the restore command or make a restore Job
+ get the bootstrap file.
+- Make bootstrap file handle multiple MediaTypes (SD)
+- Test restoring into a user restricted directory on Win32 -- see
+ bug report.
+- Fix 3993 error in SD. It forgets to look at autochanger
+ resource for device command, ...
+- --without-openssl breaks at least on Solaris.
+- Python:
+ - Make a callback when Rerun failed levels is called.
+ - Give Python program access to Scheduled jobs.
- Python script to save with Python, not save, save with Bacula.
- Python script to do backup.
-- Windows restore:
- data-fd: RestoreFiles.2004-12-07_15.56.42 Error:
- > ..\findlib\../../findlib/create_file.c:275 Could not open e:/: ERR=Der
- > Prozess kann nicht auf die Datei zugreifen, da sie von einem anderen
- > Prozess verwendet wird.
- Restore restores all files, but then fails at the end trying
- to set the attributes of e:
-- Add better documentation on how restores can be done
- from failed jobs.
-- Resolve the problem between Device name and Archive name,
- and fix SD messages.
+ - What events?
+ - Change the Priority, Client, Storage, JobStatus (error)
+ at the start of a job.
+ - Make sure that Python has access to Client address/port so that
+ it can check if Clients are alive.
+
+- Implement "NewVolumeEachJob = yes|no" in Dir.
+- Implement Maximum Job Spool Size
+- Remove all old Device resource code in Dir and code to pass it
+ back in SD -- better, rework it to pass back device statistics.
+- Check locking of resources -- be sure to lock devices where previously
+ resources were locked.
+- Add global lock on all devices when creating a device structure.
+
+Maybe in 1.37:
+- Add ClientDefs similar to JobDefs.
+- Print more info when bextract -p accepts a bad block.
+- To mark files as deleted, run essentially a Verify to disk, and
+ when a file is found missing (MarkId != JobId), then create
+ a new File record with FileIndex == -1. This could be done
+ by the FD at the same time as the backup.
+- Fix FD JobType to be set before RunBeforeJob in FD.
+- Look at adding full Volume and Pool information to a Volume
+ label so that bscan can get *all* the info.
+- If the user puts "Purge Oldest Volume = yes" or "Recycle Oldest Volume = yes"
+ and there is only one volume in the pool, refuse to do it -- otherwise
+ he fills the Volume, then immediately starts reusing it.
+- Implement copies and stripes.
+- Add history file to console.
+- Each file on tape creates a JobMedia record. Peter has 4 million
+ files spread over 10000 tape files and four tapes. A restore takes
+ 16 hours to build the restore list.
+- Add and option to check if the file size changed during backup.
- Make sure SD deletes spool files on error exit.
- Delete old spool files when SD starts.
-- When Python creates a new label, the tape is immediately
- recycled and no label created. This happens when using
- autolabeling -- even when Python doesn't generate the name.
-- Add a restore directory-x
- When labeling tapes, if you enter 000026, Bacula uses
the tape index rather than the Volume name 000026.
-- Max Vols limit in Pool off by one?
-- Look at Preben's acl.c error handling code.
-- See multiple-store.txt for Multiple Storage implementation
- design.
-- Create a new GUI chapter explaining all the GUI programs.
-- Tell the "restore" user when browsing is no longer possible.
-- Require restore via the restore command or make a restore Job
- get the bootstrap file.
-- Make bootstrap file handle multiple MediaTypes (SD)
- Add offline tape command to Bacula console.
-- Document that Bootstrap files can be written with cataloging
- turned off.
-- Look at adding full Volume and Pool information to a Volume
- label so that bscan can get *all* the info.
-- Scratch Pool where the volumes can be re-assigned to any Pool.
-- Upgrade to MySQL 4.1.1 See:
- http://dev.mysql.com/doc/mysql/en/Server_SQL_mode.html
-- Add client version to the Client name line that prints in
- the Job report.
- Bug:
Enter MediaId or Volume name: 32
Enter new Volume name: DLT-20Dec04
dev.c:1207 ioctl MTWEOF error on /dev/nst0. ERR=Permission denied.
askdir.c:219 NULL Volume name. This shouldn't happen!!!
3912 Failed to label Volume: ERR=dev.c:1207 ioctl MTWEOF error on /dev/nst0. ERR=Permission denied.
-
Label command failed for Volume DLT-20Dec04.
Do not forget to mount the drive!!!
- Bug: if a job is manually scheduled to run later, it does not appear
1.37 Possibilities:
+- A HOLD command to stop all jobs from starting.
+- A PAUSE command to pause all running jobs ==> release the
+ drive.
+- Media Type = LTO,LTO-2,LTO-3
+ Media Type Read = LTO,LTO2,LTO3
+ Media Type Write = LTO2, LTO3
+
=== From Carsten Menke <bootsy52@gmx.net>
Following is a list of what I think in the situations where I'm faced with,
list, also it is maybe a good idea to check for the return value and
execute different actions based on the return value
-2. Priorities also for the Schedule Resource
-
- Why:
-
- With this it is possible to run monthly jobs at the end of the month
- instead of the beginning of the next month, so one could define
- weekly and monthly pools to be run on Fridays and if there are
- 2 Jobs resulting on the same time, the one with the higher priority
- takes precedence. This is also helpfull to implement a daily
- rotation scheme with an additional 2 weeks changing weekly pool
-
-Example:
- Schedule {
- Name = "NightlyBackup"
- Run = Priority = 1,Pool=Weekly friday at 21:00
- Run = Priority = 2,Pool=Weekly monthly on friday at 21:00
- Run = Priority = 3,Pool=Weekly yearly on friday at 21:00
- }
3. offline capability to bconsole
format string. Then I have the tape labeled automatically with weekday
name in the correct language.
==========
+- Yes, that is surely the case. I probably should turn those into Warning
+ errors. In addition, you just made me think that it might not be bad to
+ add an option to check the file size after backing up the file and
+ report if it changes. This would be done as an option because it would
+ add extra overhead.
+
+ Kern, good idea. If you do do that, mention in the output: file
+ shrunk, or file expanded, just to make it obvious to the user
+ (without having to the refer to file size), just how the file size
+ changed.
+
+ Would this option be for all file, or just one file? Or a fileset?
+- Make output from status use html table tags for nicely
+ presenting in a browser.
- Can one write tapes faster with 8192 byte block sizes?
-- Specify a single directory to restore.
-- Implement Maximum Job Spool Size
- Document security problems with the same password for everyone in
rpm and Win32 releases.
- Browse generations of files.
bacula 1.36.0/1 works with blocksize 16k INSIDE bacula-sd.conf.
- Add regex from http://www.pcre.org to Bacula for Win32.
- Use only shell tools no make in CDROM package.
-- Document PostgreSQL performance problems bug 131.
-- Document testing
-- Document that ChangerDevice is used for Alert command.
- Include within include does it work?
- Implement a Pool of type Cleaning?
- Implement VolReadTime and VolWriteTime in SD
- Look at correcting the time jump in the scheduler for daylight
savings time changes.
- Add a "real" timer to network connections.
-- Write non-optimized bsrs from the JobMedia and Media records,
- even after Files are pruned.
- Promote to Full = Time period
-- Despool attributes simultaneously with data in a separate
- thread, rejoined at end of data spooling.
-- Implement Files/Bytes,... stats for restore job.
-- Implement Total Bytes Written, ... for restore job.
- Check dates entered by user for correctness (month/day/... ranges)
- Compress restore Volume listing by date and first file.
- Look at patches/bacula_db.b2z postgresql that loops during restore.
hours of operation.
From Phil:
In this context, it should be noted that Exabyte has a command-line
- vxatool utility available for free download. (The current version is
+ vxatool utility available for free download. (The current version is
vxatool-3.72.) It can get diagnostic info, read, write and erase tapes,
test the drive, unload tapes, change drive settings, flash new firmware,
etc.
Of particular interest in this context is that vxatool <device> -i will
report, among other details, the time since last cleaning in tape motion
- minutes. This information can be retrieved (and settings changed, for
+ minutes. This information can be retrieved (and settings changed, for
that matter) through the generic-SCSI device even when Bacula has the
- regular tape device locked. (Needless to say, I don't recommend
+ regular tape device locked. (Needless to say, I don't recommend
changing tape settings while a job is running.)
- Lookup HP cleaning recommendations.
- Lookup HP tape replacement recommendations (see trouble shooting autochanger)
- Document doing table repair
-
-
-Testing to do: (painful)
-For 1.37 Testing/Documentation:
+===================================
+- Add macro expansions in JobDefs.
+ Run Before Job = "SomeFile %{Level} %{Client}"
+ Write Bootstrap="/some/dir/%{JobName}_%{Client}.bsr"
+- Use non-blocking network I/O but if no data is available, use
+ select().
+- Use gather write() for network I/O.
+- Autorestart on crash.
- Add bandwidth limiting.
- Add acks every once and a while from the SD to keep
the line from timing out.
units, perhaps via a directive.
- If opening a tape in read/write mode fails attempt to open
it in read-only mode, and mark the tape for read only.
-- Add a read-only mode to the mount option.
- Allow Simultaneous Priorities = yes => run up to Max concurrent jobs even
with multiple priorities.
- If you use restore replace=never, the directory attributes for
perhaps if password is undefined.
- Implement "from ISO-date/time every x hours/days/weeks/months" in
schedules.
-=== rate design
- jcr->last_rate
- jcr->last_runtime
- MA = (last_MA * 3 + rate) / 4
- rate = (bytes - last_bytes) / (runtime - last_runtime)
==== from Marc Schoechlin
- the help-command should be more verbose
(it should explain the paramters of the different
commands in detail)
- -> it´s time-comsuming to consult the manual anytime
+ -> its time-comsuming to consult the manual anytime
you need a special parameter
- -> maybe it´s more easy to maintain this, if the
+ -> maybe its more easy to maintain this, if the
descriptions of that commands are outsourced to
a ceratin-file
- the cd-command should allow complete paths
i.e. cd /foo/bar/foo/bar
-> if a customer mails me the path to a certain file,
- it´s faster to enter the specified directory
+ its faster to enter the specified directory
- if the password is not configured in bconsole.conf
you should be asked for it.
-> sometimes you like to do restore on a customer-machine
- which shouldn´t know the password for bacula.
+ which shouldnt know the password for bacula.
-> adding the password to the file favours admins
to forget to remove the password after usage
-> security-aspects
- Investigate adding Mac Resource Forks.
- Finish work on Gnome restore GUI.
- Fix "llist jobid=xx" where no fileset or client exists.
-- From Chris Hull:
- it seems to be complaining about 12:00pm which should be a valid 12
- hour time. I changed the time to 11:59am and everything works fine.
- Also 12:00am works fine. 0:00pm also works (which I don't think
- should). None of the values 12:00pm - 12:59pm work for that matter.
-- Add level to estimate command.
- For each job type (Admin, Restore, ...) require only the really necessary
- fields.
-- Fix option 2 of restore -- list where file is backed up -- require Client,
- then list last 20 backups.
-- Pass Director resource name as an option to the Console.
+ fields.- Pass Director resource name as an option to the Console.
- Add a "batch" mode to the Console (no unsolicited queries, ...).
- Add a .list all files in the restore tree (probably also a list all files)
Do both a long and short form.
did not exist.
- Use SHA1 on authentication if possible.
- See comtest-xxx.zip for Windows code to talk to USB.
-- Add Events and Perl scripting.
- Add John's appended files:
Appended = { /files/server/logs/http/*log }
and such files would be treated as follows.On a FULL backup, they would
creation date of files, we can be evensmarter about this and not count
entirely upon the length.On a restore, the full and all incrementals
since it will beapplied in sequence to restore the file.
-- Allow for optional cancelling of SD and FD in case DIR
- gets a fatal error. Requested by Jesse Guardiani <jesse@wingnet.net>
-- Add "limit=n" for "list jobs"
- Check new HAVE_WIN32 open bits.
- Check if the tape has moved before writing.
- Handling removable disks -- see below:
and form it from VolFile and VolBlock.
- Make multiple restore jobs for multiple media types specifying
the proper storage type.
-- Implement MediaType keyword in bsr?
- Fix fast block rejection (stored/read_record.c:118). It passes a null
pointer (rec) to try_repositioning().
- Look at extracting Win data from BackupRead.
support for Oracle database ??
===
- Look at adding SQL server and Exchange support for Windows.
-- Each DVD-RAM disk would be a volume, just like each tape is
- a volume. It's a 4.7GB media with random access, but there's nothing about
- it that I can see that makes it so different than a tape from bacula's
- perspective. Why couldn't I back up to a bare floppy as a volume (ignoring
- the media capacity?)
- Make dev->file and dev->block_num signed integers so that -1 can
be an invalid value which happens with BSR.
- Create VolAddr for disk files in place of VolFile and VolBlock. This
- Add progress of files/bytes to SD and FD.
- Print warning message if FileId > 4 billion
- do a "messages" before the first prompt in Console
-- Add a date and time stamp at the beginning of every line in the
- Job report (Volker Sauer).
- Client does not show busy during Estimate command.
- Implement Console mtx commands.
- Implement a Mount Command and an Unmount Command where
an officially adopted standard, has survived peer
review, and provides keys up to 256 bits.
- Take a careful look at SetACL http://setacl.sourceforge.net
-- Take a careful look at Level for the estimate command, maybe make
- it a command line option.
-- Add Volume name to "I cannot write on this volume because"
- Make tree walk routines like cd, ls, ... more user friendly
by handling spaces better.
- Make sure that Bacula rechecks the tape after the 20 min wait.
in the "short" pool to the "long" pool if this pool runs out of volume
space?
- What to do about "list files job=xxx".
-- Make Dmsg look at global before calling subroutine.
- Get and test MySQL 4.0
- Look at how fuser works and /proc/PID/fd that is how Nic found the
file descriptor leak in Bacula.
- If pool specified to label command and Label Format is specified,
automatically generate the Volume name.
- Why can't SQL do the filename sort for restore?
-- Look into Microsoft Volume Shadowcopy Service VSS for backing
- up system state components (Active Directory, System Volume, ...)
- Add ExhautiveRestoreSearch
- Look at the possibility of loading only the necessary
data into the restore tree (i.e. do it one directory at a
Windows.
- Implement migrate
- Use autochanger to handle multiple devices.
-- Add SuSE install doc to list.
-- Check and rechedk "Invalid block number"
-- User wants to NOT backup up certain big files (email files).
-- Maybe remove multiple simultaneous devices code in SD.
- On Windows with very long path names, it may be impossible to create
a file (and thus restore it) because the total length is too long.
We must cd into the directory then create the file without the
full path name.
- Implement a Recycle command
-- Add client name to cram-md5 challenge so Director can immediately
- verify if it is the correct client.
-- Audit all UA commands to ensure that we always prompt where possible.
-- Make bootstrap filename unique.
- Test a second language e.g. french.
- Start working on Base jobs.
- Implement UnsavedFiles DB record.
-- Implement argc/argv for daemon command line scanning using table driven
- stuff below.
- From Phil Stracchino:
It would probably be a per-client option, and would be called
something like, say, "Automatically purge obsoleted jobs". What it
all Differential and Incremental jobs obsoleted by that Full backup.
This would let people minimize the number of tapes they're keeping on
hand without having to master the art of retention times.
-- Implement a M_SECURITY message class.
- When doing a Backup send all attributes back to the Director, who
would then figure out what files have been deleted.
- Currently in mount.c:236 the SD simply creates a Volume. It should have
explicit permission to do so. It should also mark the tape in error
if there is an error.
-- SD Bytes Read is wrong.
-- Investigate doing RAW backup of Win32 partition.
- Cancel waiting for Client connect in SD if FD goes away.
- Implement timeout in response() when it should come quickly.
-- Implement console @echo command.
- Implement a Slot priority (loaded/not loaded).
- Implement "vacation" Incremental only saves.
-- Implement single pane restore (much like the Gftp panes).
-- Implement Automatic Mount even in operator wait.
- Implement create "FileSet"?
-- Implement restore "current system", but take all files without
- doing selection tree -- so that jobs without File records can
- be restored.
- Add prefixlinks to where or not where absolute links to FD.
- Issue message to mount a new tape before the rewind.
- Simplified client job initiation for portables.
- Priority job to go to top of list.
- Why are save/restore of device different sizes (sparse?) Yup! Fix it.
- Implement some way for the Console to dynamically create a job.
-- Restore to a particular time -- e.g. before date, after date.
- Solaris -I on tar for include list
- Need a verbose mode in restore, perhaps to bsr.
- bscan without -v is too quiet -- perhaps show jobs.
- Check if we can increase Bacula FD priorty in Win2000
- Make sure the MaxVolFiles is fully implemented in SD
- Check if both CatalogFiles and UseCatalog are set to SD.
-- Figure out how to do a bare metal Windows restore
- Possibly add email to Watchdog if drive is unmounted too
long and a job is waiting on the drive.
- After unmount, if restore job started, ask to mount.
-- Convert all %x substitution variables, which are hard to remember
- and read to %(variable-name). Idea from TMDA.
-- Remove NextId for SQLite. Optimize.
-- Move all SQL statements into a single location.
- Add UA rc and history files.
- put termcap (used by console) in ./configure and
allow -with-termcap-dir.
- Fix Autoprune for Volumes to respect need for full save.
-- Fix Win32 config file definition name on /install
- Compare tape to Client files (attributes, or attributes and data)
- Make all database Ids 64 bit.
-- Write an applet for Linux.
- Allow console commands to detach or run in background.
- Fix status delay on storage daemon during rewind.
- Add SD message variables to control operator wait time
=============================================================
-Done: (see kernsdone for more)
-
-=== after 1.32c
-- John's Full save failed with 1.32c FD and 1.31 Dir no FD status,
- and no error message.
-- Add fd and st as Console keywords.
-- Recycling volume with a Slot requires an operator intervention:
- rufus-dir: Start Backup JobId 18, Job=kernsave.2003-11-01_21.23.52
- rufus-dir: Pruned 1 Job on Volume Vol01 from catalog.
- rufus-dir: There are no Jobs associated with Volume Vol01. Marking it purged.
- rufus-dir: Recycled volume "Vol01"
- rufus-sd: Please mount Volume "Vol01" on Storage Device "DDS-4" for Job kernsave.2003-11-01_21.23.52
- Use "mount" command to release Job.
-- Implement Dan's bacula script (email of 26 Oct).
-- Add JobName= to VerifyToCatalog so that all verifies can be done at the end.
-- Edit the Client/Storage name into authentication failure messages.
-- Fix packet too big problem. This is most likely a Windows TCP stack
- problem.
-- Implement ClientRunBeforeJob and ClientRunAfterJob.
-- Implement forward spacing block/file: position_device(bsr) --
- just before read_block_from_device();
-
=====
Multiple drive autochanger data: see Alan Brown
mtx -f xxx unloadStorage Element 1 is Already Full(drive 0 was empty)
- Bootstrap from JobMedia records.
- Implement WildFile and WildDir to solve problem of
saving only *.doc files.
+- Fix
+ Please use the "label" command to create a new Volume for:
+ Storage: DDS-4-changer
+ Media type:
+ Pool: Default
+ label
+ The defined Storage resources are:
+- Copy Changer Device and Changer Command from Autochanger
+ to Device resource in SD if none given in Device resource.
+- 1. Automatic use of more than one drive in an autochanger (done)
+- 2. Automatic selection of the correct drive for each Job (i.e.
+ selects a drive with an appropriate Volume for the Job) (done)
+- 6. Allow multiple simultaneous Jobs referencing the same pool write
+ to several tapes (some new directive(s) are are probably needed for
+ this) (done)
+- Locking (done)
+- Key on Storage rather than Pool (done)
+- Allow multiple drives to use same Pool (change jobq.c DIR) (done).
+- Synchronize multiple drives so that not more
+ than one loads a tape and any time (done)
+- 4. Use Changer Device and Changer Command specified in the
+ Autochanger resource, if none is found in the Device resource.
+ You can continue to specify them in the Device resource if you want
+ or need them to be different for each device.
+- 5. Implement a new Device directive (perhaps "Autoselect = yes/no")
+ that can allow a Device be part of an Autochanger, and hence the changer
+ script protected, but if set to no, will prevent the Device from being
+ automatically selected from the changer. This allows the device to
+ be directly accessed through its Device name, but not through the
+ AutoChanger name.
+#6 Select one from among Multiple Storage Devices for Job
+#5 Events that call a Python program
+ (Implemented in Dir/SD)
+- Make sure the Device name is in the Query packet returned.
+- Don't start a second file job if one is already running.
+- Implement EOF/EOV labels for ANSI labels
+- Implement IBM labels.
+- When Python creates a new label, the tape is immediately
+ recycled and no label created. This happens when using
+ autolabeling -- even when Python doesn't generate the name.
+- Scratch Pool where the volumes can be re-assigned to any Pool.
+- 28-Mar 23:19 rufus-sd: acquire.c:379 Device "DDS-4" (/dev/nst0)
+ is busy reading. Job 6 canceled.
+- Remove separate thread for opening devices in SD. On the other
+ hand, don't block waiting for open() for devices.
+- Fix code to either handle updating NumVol or to calculate it in
+ Dir next_vol.c
+- Ensure that you cannot exclude a directory or a file explicitly
+ Included with File.
+#4 Embedded Python Scripting
+ (Implemented in Dir/SD/FD)
+- Add Python writable variable for changing the Priority,
+ Client, Storage, JobStatus (error), ...
+- SD Python
+ - Solicit Events
+- Add disk seeking on restore; turn off seek on tapes.
+ stored/match_bsr.c
+- Look at dird_conf.c:1000: warning: `int size'
+ might be used uninitialized in this function
+- Indicate when a Job is purged/pruned during restore.
+- Implement some way to turn off automatic pruning in Jobs.
+- Implement a way an Admin Job can prune, possibly multiple
+ clients -- Python script?
+- Look at Preben's acl.c error handling code.
+- SD crashes after a tape restore then doing a backup.
+- If drive is opened read/write, close it and re-open
+ read-only if doing a restore, and vice-versa.
+- Windows restore:
+ data-fd: RestoreFiles.2004-12-07_15.56.42 Error:
+ > ..\findlib\../../findlib/create_file.c:275 Could not open e:/: ERR=Der
+ > Prozess kann nicht auf die Datei zugreifen, da sie von einem anderen
+ > Prozess verwendet wird.
+ Restore restores all files, but then fails at the end trying
+ to set the attributes of e:
+ from failed jobs.- Resolve the problem between Device name and Archive name,
+ and fix SD messages.
+- Tell the "restore" user when browsing is no longer possible.
+- Add a restore directory-x
+- Write non-optimized bsrs from the JobMedia and Media records,
+ even after Files are pruned.
+- Delete Stripe and Copy from VolParams to save space.
+- Fix option 2 of restore -- list where file is backed up -- require Client,
+ then list last 20 backups.
+- Finish implementation of passing all Storage and Device needs to
+ the SD.
+- Move test for max wait time exceeded in job.c up -- Peter's idea.
+## Consider moving docs to their own project.
+## Move rescue to its own project.
+- Add client version to the Client name line that prints in
+ the Job report.
+- Fix the Rescue CDROM.
+- By the way: on page http://www.bacula.org/?page=tapedrives , at the
+ bottom, the link to "Tape Testing Chapter" is broken. It goes to
+ /html-manual/... while the others point to /rel-manual/...
+- Device resource needs the "name" of the SD.
+- Specify a single directory to restore.
+- Implement MediaType keyword in bsr?
+- Add a date and time stamp at the beginning of every line in the
+ Job report (Volker Sauer).
+- Add level to estimate command.
+- Add "limit=n" for "list jobs"
+- Make bootstrap filename unique.
+- Make Dmsg look at global before calling subroutine.
projects / bacula / bacula / blobdiff