General:
-Changes to 1.37.32:
-03Aug03
+Changes to 1.37.42:
+26Oct05
+- Return HARDEOF status from bnet_recv() if bsock NULL rather
+ than aborting.
+- Don't overwrite pthreadVCE.dll or msvcr71.dll during Win32
+ install.
+- Update README.win32 instructions.
+25Oct05
+- Make db_get_job_record() return Name so that the ACL
+ can be checked. Fixes bug #446
+22Oct05
+- Insure that all the SD tools init the Autochanger
+ resources.
+
+Changes to 1.37.41:
+22Oct05
+- Print error message if no Changer Command found.
+- Apply fix from Martin Simmons to clear structure before
+ using it in IPADDR -- fixes a bind() bug on AIX.
+14Oct05
+- Add NetBSD fstype patch from Geert Hendrickx <ghen@telenet.be>
+- Update num_parts only when writing to DVD.
+13Oct05
+- Fix error conditions in bpipe.c DVD routine (terminate buffer).
+- Use a bigger buffer 32K as suggested by Arno in bpipe.c.
+- Increase dvd mount timeout with patch from Arno.
+- Modify DVD code so that it keeps a state flag that indicates
+ when the freespace variable is valid. freespace_errno, now has
+ either 0 or an errno. There are no negative errnos.
+- Create is_freespace_ok() to test state flag. Also, set_freespace_ok()
+ and clear_freespace_ok(). Modify code to use them. This
+ simplifies a bit the logic of the freespace code.
+- Edit 64bit debug values correctly in dvd.c
+- Fix %e variable to check num_parts rather than part.
+- Use static buffer instead of static buffers for FI_to_ascii()
+ and stream_to_ascii() debug routines in SD. This is to prevent
+ possible race conditions between two threads (possibly Phil's
+ unmount problem).
+12Oct05
+- Add a .dir command that separates arguments with commas. It
+ is intended to be used in the tree routines to get a
+ machine readable output for GUIs like wx-console.
+- Make configure set dvd-handler to have execute permission.
+- Install dvd-handler as is done for other dvd-xxx scripts.
+- In block.c call dvd_write_part() to write last part rather
+ than dvd_open_next_part().
+- Prefix some DVD subroutines with dvd_
+11Oct05
+- Add extra debug to Update media error for VolFiles decrease
+ error.
+- Do not update dev->file on set_ateof() for non-tape.
+10Oct05
+- Mark DVD volume in error if part cannot be written.
+- If a DVD is mounted, unmount it before asking operator
+ to mount an different one.
+- Add Arno's dvd-handler script to the scripts directory and
+ integrate with configure. It replaces both existing scripts.
+- Make default schedule start at 23:10
+- Implement gui release in Makefile. It creates two .tar.gz
+ bacula-web and bimagemgr.
+08Oct05
+- Add README plus tar release to gui project.
+- Manual documentation
+- Tweak bacula.man doc
+- Add PRAGMA synchronous = NORMAL; to SQLite3 tables. This
+ speeds up SQLite3 so it is only about 10% slower than version
+ 2.xx. Thanks to Russell Howe for this tip.
+- Add msvcr71.dll to pebuilder .inf file as it is needed by
+ Bacula FD. Thanks to Brandon for passing this fix to Scott.
+05Oct05
+- Add VolumePurged method to Python JobEvents class. Fixes
+ bug #428 (I think).
+- Add JobId index to File table for MySQL.
+- Correct tray-monitor crash of bacula-dir. qstatus_cmd()
+ code referenced the wrong pointer. Fixes bug #438.
+- Add bacualnovss.mak file from Martin.
+- Remove Pool from restore string in wbrestorepanel.cpp. Patch
+ from user for bug #433.
+- Correct code in wbrestorpanel.cpp with misplaced parens. Patch
+ from user for bug #431
+- Correct printing filenames/date/times in wbrestorepanel.cpp due to bad
+ column alignment. Patch from user for bug #432.
+
+Changes to 1.37.40:
+01Oct05
+- Add fix to compat.h supplied by Martin Simmons that permits
+ building the Win32 FD without VSS.
+29Sep05
+- Bring cats/bdb_x.c routines up to version 1.37 (return values
+ are different).
+28Sep05
+- Integrate libwrap patch from Szechuan Death. They should
+ also fix bug 423.
+- Clean up patches directory for next release.
+- Add PS variable in bacula.in script as recommended by a user.
+ "Tom Boyda" <tboyda@daou.com>
+- Correct mtx-changer.in so it only creates a temp file when
+ actually needed.
+- Add patch supplied by user in a bug report to fix gnome2
+ console buttons.
+- Add patch from Peter Eriksson <peter@ifm.liu.se> to correct
+ NLS error in tray-monitor.c
+26Sep05
+- Add code to catalog_update to detect NULL db pointer.
+- Remove char *msg argument from catalog_request and
+ catalog_update().
+24Sep05
+- Fix mode change open in btape.c
+- Use nonblocking opens on Linux only.
+- Move set_blocking code for tapes into method to
+ simplify main line code.
+- Cleanup the code for ensuring we advance tape on fsf.
+ This should fix IBM problems -- patch from Adam Thorton
+ was very helpful.
+- Remove test for BMT_EOD in fixup_device... this eliminates
+ need for status_dev() routine.
+- Before doing label ensure device is in read-write mode.
+
+Changes to 1.37.39:
+20Sep05
+- Tweak daemon.c berrno, copyright.
+19Sep05
+- Fix handling of temp file in mtx_changer.in, reported as
+ a security bug, but it is not really. Bug #422
+- Fix security problem of handling temp file in randpass.
+ Bug #422.
+- During label/relabel, add new_volume to VOLRES list in SD.
+18Sep05
+- Apply Landon's patch for the TLS ANS1 API change.
+- Remove old code.
+- Make single exit path in first_open_device().
+17Sep05
+- Make new_volume walk through all Vols looking for dev
+ to release.
+16Sep05
+- Make "quit" command in console always allowed.
+- Remove the storage list between each console command to
+ keep Dir from remembering a previously selected SD.
+- Add code to reservation VOLRES subroutines to try to ensure
+ we don't end up with two Volumes on the same drive.
+- Simplify the mutex code in VOLRES a bit to reduce the chance
+ of error.
+15Sep05
+- Apply Nicolas' dvd-freespace.in patch.
+- Make sure SQL table names are not translated.
+- Eliminate incorrect message saying barcodes not
+ found in "label barcodes" -- fixes bug report.
+
+Changes to 1.37.38:
+07Sep05
+- Add ability to have passwords on backup of catalog as
+ alternate 3rd argument. Submitted by Andrew Ford
+ <A.Ford@ford-mason.co.uk>
+- Turn off TapeAlert by default if user enables a Device
+ and add a note to install mtx.
+04Sep05
+- Fix out of order volumes during restore.
+
+Changes to 1.37.37:
+30Aug05
+- Final tweaks to build Win32.
+- Enable debug code in ua_label.c
+- Remove devices from the Volume list even if no
+ Volume is in drive. Hopefully this fixes Arno's problem
+ of multiple volumes listed in the same drive.
+28Aug05
+- Apply Landon's patch for TLS default values.
+- Correct LOCALEDIR problem in build of Win32
+- Correct ssize_t problem in build of Win32
+- Add code to llprint pools and volumes to debug next item.
+- From bug report, fix resetting Pool defaults in Volume. It
+ was a typo "Max" was missing in several places.
+- Don't allow translation of database Volume Status values.
+24Aug05
+- Ensure that the drive is closed before calling the
+ mtx-changer script so that the script can access the drive.
+- Add drive name to reserved Volume list printout in SD.
+23Aug05
+- Fix bug in acquire.c that incorrectly reported volume
+ busy.
+- Add additional debug code and messages in reserve.c
+- Eliminate unwanted warning message in reserve.c
+
+Changes to 1.37.36 release 22Aug05:
+20Aug05
+- Landon's fix for NLS detection
+- Eliminate incorrect compiler warning on FreeBSD.
+- Move Win32 errno message build into berrno constructor.
+- Minor Win32 build tweaks
+19Aug05
+- A number of minor build Win32 fixes.
+- Remove a PostQuitMessage() as suggested by Thorsten so that
+ BartPE restore can work correctly.
+- Fix for create JobMedia so that VolIndex remains valid even
+ during a delete Job or pruning -- bug 402.
+- Minor tweak for Win32 build.
+18Aug05
+- Win32 fix -- remove debug O_NONBLOCK code.
+- Fix bug 399 -- make_catalog_backup does not work for sqlite3
+- Implement unloading a volume in a different drive if it
+ is needed in the current drive.
+- Implement search for unused autochanger drive.
+- Implement search for exact Volume in reservation before
+ other searches.
+- Fix picking up drive in Dir so that it is not done in
+ the status command.
+- Eliminate double check on "loaded" for autochanger.
+17Aug05
+- Start coding better reservation algorithm
+- Always look for slot for label command.
+- Add more debug code for autochangers.
+- Apply fix from Stephan Leemburg <sleemburg@jvc.nl> for
+ improper scanning of schedule resource:
+ Run = Level=Full Pool=Catalog daily at 1:20
+- Apply patch from Chris Lee <labmonkey42@gmail.com> for
+ adding --enable-build-dird --enable-build-stored.
+- Tweak datadir definition in configure.in
+16Aug05
+- Fix bug that missed drive=nn specification.
+- Eliminate nonblocking kludge in heartbeat of FD as
+ it caused high CPU usage.
+- Pickup loaded slot when doing open() of tape drive.
+- Make autochanger reservation code go through full list
+ first pass until exact match found.
+15Aug05
+- Fix how FileSet is saved in job record to correct continual
+ Full save.
+- Make datadir print on config.out listing.
+- Move get FileSet record up in backup init to eliminate continual
+ Full save seen by Peter Sjoberg.
+- Add VolumeName to read-only Python variables.
+- Add VolumePurged event for Python.
+- Suppress /dev/ Filesystem change prohibited INFO messages.
+- Do not delete FT_RAW files before restore (allows FIFOs
+ to be used for restore).
+13Aug05
+- Add drive specification to mount, unmount, release, label,
+ and relabel for Autochangers. Note Dir<->SD protocol has
+ changed.
+
+Changes to 1.37.35:
+12Aug05
+- Disable parts of NLS as the configure does not work here.
+- In job backup init (backup.c) define definitive Job level and
+ since time, *then* apply Job Pool override selection if any.
+11Aug05
+- Modified bconsole script so that it is improperly
+ installed, it will refuse to execute. This avoids
+ recursive call loops.
+
+Changes to 1.37.34:
+06Aug05
+- Apply David's ACL fix to src/filed/acl.c
+05Aug05
+- Apply patches sent by David Duchscher <kreios@gmail.com> for
+ making ACLs work on MacOS X and FreeBSD.
+04Aug05
+- Apply patch in bug#397 that improved configure
+ - find readline under $with_readline/include/readline
+ - no libutil under Solaris
+ - no need for -ldl under Solaris
+- Make reservation system single threaded during the
+ search to avoid two threads competing for the same
+ resource.
+- Correct a return code in find_suitable_device_for_job()
+ Possibly cause of "busy writing to another volume".
+03Aug05
+- Modify open() for tape so nonblocking really works.
+- Use fcntl() to reset blocking status rather than close()
+ and reopen the drive.
+- Make sure dev->open() is always called so that any change
+ in read/write permissions will occur.
+- Open drives initially in daemon in read-only mode.
+- Ensure that each time the VolHdr.VolumeName is zapped
+ or changed that free_volume() is called on the old name.
+
+Changes to 1.37.33:
+03Aug05
- Require 5 arguments to mtx-changer except list and slots
- Turn -EPIPE status returns from bpipe to ETIME
- Include Slot in SD status output
- Do not term_dev() during initialization in SD if the device
could not be opened. In the case of a tape drive, there may
be no tape in the drive.
+
+Changes to 1.32.32:
02Aug05
- Correct PostgreSQL database scripts as suggested by a user.
- Add additional info to FATAL message generated when a device
- Make built-in variables table driven.
- First cut of Python Events for Bacula. Director only.
StartJob, EndJob, NewVolume events.
-
-Version 1.36.1 Released 26Nov04:
-24Nov04
-- Take Dan's fix to the fix_postgresql_tables (thanks Dan)
-- Increase Maximum Concurrent Jobs to 20 in SD and FD!
-- Fix improper handling of autochanger Volumes that are not
- marked InChanger. Bug 170.
-22Nov04
-- Update authentication failure message to indicate possible
- problem with Maximum Concurrent Jobs. Add to doc too.
-- Commit PostgreSQL BIGINT fix -- apparently some people didn't
- get it.
-- Do not use a slot unless it is InChanger in the autochanger
- code, otherwise autochanger gets upset not finding the Volume.
- Bug 170 (need fix above too).
-21Nov04
-- Make authentication timeout compile time configurable.
- The value is set in src/baconfig.h
-- Fix removing items from watchdog queue, which apparently
- screwed up if there was more than one item.
-- Rework mediaformat part of manual to separate out old
- tape format for easier reading.
-- Add a lot of debug code to the authentication code.
-- Add seconds to the start/end times printed in the job report.
-19Nov04
-- Fix mutex deadlock in dequeue of messages.
-- Add debug code to FD authorization.
-18Nov04
-- Increase authentication timeouts to 10 minutes.
-15Nov04
-- Fix cancel bug in FD on /lib/tls with zero pid in
- pthread_kill.
-- Add date/time to all messages.
-- Make Qmsg use time message was queued rather than time
- printed.
-- Indent job output two spaces.
-13Nov04
-- Fix web page links for new manual.
-- Grant postgresql permission to cdimages.
-- Correct crash after "list nextvol" "list media" bug 160
-12Nov04
-- Fix scripts/Makefile.in missing ;\ -- thanks Martin
-- A bit of work on btape to keep if from going into infinite
- loops when things do not work well, and to print a bit
- better info.
-11Nov04
-- JobDefs Storage resource completely overrode anything
- specified in Job resource -- bug 159 -- fixed.
-- Fix syntax of renaming postgresql per Dan.
-- Add working_directory to be /tmp for wx_console.
-10Nov04
-- Allow both a JobId and a filename or list of files to be
- specified on a restore command line.
-- Save old mtx-changer before installing new one: bug 156
-- Fix errors in CDROM file pointed out by Scott.
-09Nov04
-- Fix exepath when Bacula executed without path.
-- Move test for socket libraries for Solaris in configure.in
- before tcp wrapper tests so that linking works.
-- Add "make copy-static-fd" to makefile in CDROM file to
- copy existing static fd to CDROM rather than building it.
-08Nov04
-- More doc updates
-- Fix ps command for OpenBSD
-- Rework the creation of indexes for SQL -- fall back
- to the old code, but document what can be added.
-06Nov04
-- Add new Daemon message handler in default DIR conf.
-05Nov04
-- Fix Seg Fault with -D100 in bpipe.c.
-- Fix Seg Fault in run specifying a JobId.
-- Make mail from daemon with a Messages Resource use
- the MailCommand with editing rather than the default
- sendmail.
-- Replace Jmsg in dispatch_message() with Qmsg.
-- Make edit_job_codes handle NULL jcr.
-04Nov04
-- Add M_ALERT class and put tape alerts into it.
-- Fix Verify count vs found by not double counting files
- that are split across files/Volumes.
-30Oct04
-- Fix count returned from write_bsr_file() to handle multiple
- volumes. This fixes most cases of the Verify VolumeToCatalog.
-- Cleanup a bit the make clean for the rescue cdrom and remove
- unneeded files from the CVS.
-28Oct04
-- Fixed acquiring a tape so that it does not block all acquires
- when operator intervention is needed.
-- Platform build script updates from Scott
-- Doc updates
-- Add patch to force Linux LD_ASSUME_KERNEL to avoid using the
- new /lib/tls. This is done in the startup scripts.
-- Modify mtx-changer so that it checks for ONLINE while
- waiting.
-- Modify make_postgresql_tables.in so that EndBlock is stored
- as a bigint. Prevents job failures when a disk volume is
- larger than 2GB.
-24Oct04
-- Add grep ONLINE to wait_for_drive() in mtx-changer.in
-- More doc.
-- Rebuild Scott's new configure