General:
+Changes to 1.37.40:
+26Sep05
+- Add code to catalog_update to detect NULL db pointer.
+- Remove char *msg argument from catalog_request and
+ catalog_update().
+24Sep05
+- Fix mode change open in btape.c
+- Use nonblocking opens on Linux only.
+- Move set_blocking code for tapes into method to
+ simplify main line code.
+- Cleanup the code for ensuring we advance tape on fsf.
+ This should fix IBM problems -- patch from Adam Thorton
+ was very helpful.
+- Remove test for BMT_EOD in fixup_device... this eliminates
+ need for status_dev() routine.
+- Before doing label ensure device is in read-write mode.
+
+Changes to 1.37.39:
+20Sep05
+- Tweak daemon.c berrno, copyright.
+19Sep05
+- Fix handling of temp file in mtx_changer.in, reported as
+ a security bug, but it is not really. Bug #422
+- Fix security problem of handling temp file in randpass.
+ Bug #422.
+- During label/relabel, add new_volume to VOLRES list in SD.
+18Sep05
+- Apply Landon's patch for the TLS ANS1 API change.
+- Remove old code.
+- Make single exit path in first_open_device().
+17Sep05
+- Make new_volume walk through all Vols looking for dev
+ to release.
+16Sep05
+- Make "quit" command in console always allowed.
+- Remove the storage list between each console command to
+ keep Dir from remembering a previously selected SD.
+- Add code to reservation VOLRES subroutines to try to ensure
+ we don't end up with two Volumes on the same drive.
+- Simplify the mutex code in VOLRES a bit to reduce the chance
+ of error.
+15Sep05
+- Apply Nicolas' dvd-freespace.in patch.
+- Make sure SQL table names are not translated.
+- Eliminate incorrect message saying barcodes not
+ found in "label barcodes" -- fixes bug report.
+Changes to 1.37.38:
+07Sep05
+- Add ability to have passwords on backup of catalog as
+ alternate 3rd argument. Submitted by Andrew Ford
+ <A.Ford@ford-mason.co.uk>
+- Turn off TapeAlert by default if user enables a Device
+ and add a note to install mtx.
+04Sep05
+- Fix out of order volumes during restore.
+
+Changes to 1.37.37:
+30Aug05
+- Final tweaks to build Win32.
+- Enable debug code in ua_label.c
+- Remove devices from the Volume list even if no
+ Volume is in drive. Hopefully this fixes Arno's problem
+ of multiple volumes listed in the same drive.
+28Aug05
+- Apply Landon's patch for TLS default values.
+- Correct LOCALEDIR problem in build of Win32
+- Correct ssize_t problem in build of Win32
+- Add code to llprint pools and volumes to debug next item.
+- From bug report, fix resetting Pool defaults in Volume. It
+ was a typo "Max" was missing in several places.
+- Don't allow translation of database Volume Status values.
+24Aug05
+- Ensure that the drive is closed before calling the
+ mtx-changer script so that the script can access the drive.
+- Add drive name to reserved Volume list printout in SD.
+23Aug05
+- Fix bug in acquire.c that incorrectly reported volume
+ busy.
+- Add additional debug code and messages in reserve.c
+- Eliminate unwanted warning message in reserve.c
+
+Changes to 1.37.36 release 22Aug05:
+20Aug05
+- Landon's fix for NLS detection
+- Eliminate incorrect compiler warning on FreeBSD.
+- Move Win32 errno message build into berrno constructor.
+- Minor Win32 build tweaks
+19Aug05
+- A number of minor build Win32 fixes.
+- Remove a PostQuitMessage() as suggested by Thorsten so that
+ BartPE restore can work correctly.
+- Fix for create JobMedia so that VolIndex remains valid even
+ during a delete Job or pruning -- bug 402.
+- Minor tweak for Win32 build.
+18Aug05
+- Win32 fix -- remove debug O_NONBLOCK code.
+- Fix bug 399 -- make_catalog_backup does not work for sqlite3
+- Implement unloading a volume in a different drive if it
+ is needed in the current drive.
+- Implement search for unused autochanger drive.
+- Implement search for exact Volume in reservation before
+ other searches.
+- Fix picking up drive in Dir so that it is not done in
+ the status command.
+- Eliminate double check on "loaded" for autochanger.
+17Aug05
+- Start coding better reservation algorithm
+- Always look for slot for label command.
+- Add more debug code for autochangers.
+- Apply fix from Stephan Leemburg <sleemburg@jvc.nl> for
+ improper scanning of schedule resource:
+ Run = Level=Full Pool=Catalog daily at 1:20
+- Apply patch from Chris Lee <labmonkey42@gmail.com> for
+ adding --enable-build-dird --enable-build-stored.
+- Tweak datadir definition in configure.in
+16Aug05
+- Fix bug that missed drive=nn specification.
+- Eliminate nonblocking kludge in heartbeat of FD as
+ it caused high CPU usage.
+- Pickup loaded slot when doing open() of tape drive.
+- Make autochanger reservation code go through full list
+ first pass until exact match found.
+15Aug05
+- Fix how FileSet is saved in job record to correct continual
+ Full save.
+- Make datadir print on config.out listing.
+- Move get FileSet record up in backup init to eliminate continual
+ Full save seen by Peter Sjoberg.
+- Add VolumeName to read-only Python variables.
+- Add VolumePurged event for Python.
+- Suppress /dev/ Filesystem change prohibited INFO messages.
+- Do not delete FT_RAW files before restore (allows FIFOs
+ to be used for restore).
+13Aug05
+- Add drive specification to mount, unmount, release, label,
+ and relabel for Autochangers. Note Dir<->SD protocol has
+ changed.
+
+Changes to 1.37.35:
+12Aug05
+- Disable parts of NLS as the configure does not work here.
+- In job backup init (backup.c) define definitive Job level and
+ since time, *then* apply Job Pool override selection if any.
+11Aug05
+- Modified bconsole script so that it is improperly
+ installed, it will refuse to execute. This avoids
+ recursive call loops.
+
+Changes to 1.37.34:
+06Aug05
+- Apply David's ACL fix to src/filed/acl.c
+05Aug05
+- Apply patches sent by David Duchscher <kreios@gmail.com> for
+ making ACLs work on MacOS X and FreeBSD.
+04Aug05
+- Apply patch in bug#397 that improved configure
+ - find readline under $with_readline/include/readline
+ - no libutil under Solaris
+ - no need for -ldl under Solaris
+- Make reservation system single threaded during the
+ search to avoid two threads competing for the same
+ resource.
+- Correct a return code in find_suitable_device_for_job()
+ Possibly cause of "busy writing to another volume".
+03Aug05
+- Modify open() for tape so nonblocking really works.
+- Use fcntl() to reset blocking status rather than close()
+ and reopen the drive.
+- Make sure dev->open() is always called so that any change
+ in read/write permissions will occur.
+- Open drives initially in daemon in read-only mode.
+- Ensure that each time the VolHdr.VolumeName is zapped
+ or changed that free_volume() is called on the old name.
+
+Changes to 1.37.33:
+03Aug05
+- Require 5 arguments to mtx-changer except list and slots
+- Turn -EPIPE status returns from bpipe to ETIME
+- Include Slot in SD status output
+- Do not term_dev() during initialization in SD if the device
+ could not be opened. In the case of a tape drive, there may
+ be no tape in the drive.
+
+Changes to 1.32.32:
+02Aug05
+- Correct PostgreSQL database scripts as suggested by a user.
+- Add additional info to FATAL message generated when a device
+ is busy writing to another volume.
+- Suppress an inappropriate NULL Volume name message after a cancel.
+- Correct a warning message in reserve.c
+29Jul05
+- Apply user's patch to make mutiple modifiers for times
+ work correctly.
+- Make read_dev_volume_label() handle ANSI/IBM labels
+ correctly -- ie space over any label at the beginning
+ of the tape.
+28Jul05
+- Make ANSI/IBM writing of HDR1/2 labels ignore any
+ errors if at end of tape.
+- Apply Martin's patch to improve Python detection in
+ configure.in
+- Temporarily turn off disk seeking until I find the
+ cause of the problem.
+27Jul05
+- Add OSF1 patch supplied by user.
+- Use number of files selected from write_bsr() only
+ if it is not defined.
+- Explicitly seek to end of file when getting size for
+ restore test.
+- Correctly set EndBlock position in JobMedia record
+ for files.
+- Remove unnecessary set StartBlock in bscan. Caused bscan
+ regression error.
+26Jul05
+- Modify mtx-changer to wait a maximum of 300 seconds.
+- Do restart of failed jobs only for Backups job types.
+- A number of DVD updates from Nicolas.
+24Jul05
+- Turn off old service helper code in Win32.
+- Correct Messages bug found by Phil in stored.
+23Jul05
+- Complete (almost) documentation of 1.38.
+- Add error messages for error conditions with VSS.
+- Fix additional problems with VSS backup that I introduced.
+Changes to 1.37.31:
+22Jul05
+- Correct compiler complaints in wx-console and tray-monitor.
+- Correct VSS problems recognizing c:
+- Add VSS before job status
+- Fix output of status from being one big line.
+- Change cd xx; make to cd xx && make as suggested by Phil.
+- Cleanup projects file
+- Remove unnecessary casting of FF_PKT in filed.
+- Apply Thorsten's bugfix for vss_generic.cpp
+- Add check for df path for dvd_freespace
+- Use df to get space used on DVD.
+- Change sense of flag indicating erase DVD or not before writing.
+- Fix bpipe so that it never modifies the result pointer.
+- Replace more dev_name by print_name().
+- Rewrite edit_device_codes_dev() so it does not overwrite the
+ supplied buffer.
+- Update printing of labels (for bls) so that critical information
+ is printed (Job name and timestamp).
+- Cleanup old spool files when starting the SD.
+- Modify vss.cpp to allow C: as a path name. Otherwise VSS
+ doesn't work when only a drive name is given.
+- Modify vss.c to eliminate double / in filenames.
+- Update doc -- particularly the restore chapter.
+18Jul05
+- Make all files in working directory have .xxx at end.
+- Work on DVD writing.
+- Fix keepatime bug (bugs database).
+- Move Python variables from Job to Bacula. They are
+ DirName, Version, ConfigFile, and WorkingDir
+- Fix delete of bootstrap to only occur on Bacula created
+ filenames.
+- Allow cancelling a Job name that is not active. It is
+ sent to the daemons.
+17Jul05
+- Fix name space pollution by OpenSSL 0.9.8 reported by
+ Matthias Kurz -- applied his patch.
+- Fix bpipe.c so that it does not modify results pointer.
+ ***FIXME*** calling sequence should be changed.
+- Remove some remaining references to dev_name.
+- Fix calls to mount_dev() and unmount_dev() to
+ correspond to returned value (bool instead of int).
+- Try without success to make DVD writing work.
+
+Changes to 1.37.30 released 16 July 05:
+14Jul05
+- Fix "dir" command scanning field misalignment in
+ wx-console.
+- Switch to using the wxWidgets Unicode library.
+- Include msvcr71.dll in distribution.
+- Add VSS to status line in Win32 FD if enabled.
+- Get VSS build scripts working with Thorsten's help.
+- Unlink the bootstrap file after sending it to
+ the FD.
+- Remove sending include/exclude lists to the FD during
+ a restore -- deprecated code.
+- Cleanup the bootstrap files in the FD.
+
+Changes to 1.37.29:
+14Jul05
+- Remove old commented out code from configure.in
+- Add baculavssfd.mak file for building VSS version of
+ Win32 FD.
+- Correct date (year) in vss.cpp and vss_generic.cpp
+13Jul05
+- I finally found and squashed the elusive SD crash.
+ I needed to initialize the used volume list before
+ firing off the device initialization thread.
Changes to 1.37.28:
+11Jul05
+- Make sure that bpipe results are zapped even on
+ error return.
+- Lots of documentation.
+- Do not prune volume marked as append when needing a
+ new Volume.
+- Print a warning message in SD if a non-used Volume
+ is specified and autolabel not turned on.
+- Correct a bug in chksum.c concerning SHA1 signatures
+ (an * should have been & when checking for a bit flag).
+- Print File:Block for all label records in label.c -- concerns
+ primarily bls when doing Job listings (-j).
+- Correct is_volume_in_use() to return false if testing
+ on the same device where the Volume is already mounted.
+- Define a init_done flag in the SD that is set when the
+ devices are initialized and make users connecting wait.
+ This prevents useless connect failure warning messages.
+- Do additional device locking in ask_op_to_mount_volume()
+ to prevent race conditions with a user labeling a Volume
+ or autolabeling.
+09Jul05
+- Add a test for error return from bnet_wait... in heartbeat.c
+ in FD to avoid CPU loop.
+- Implement TLS in gnome console and wx-console.
+08Jul05
+- Correct a NULL pointer reference in the mount command.
+- Correct typo in Copyright
+- Add detection of EOM for IBM drives (i.e. errno == ENOSPC)
+07Jul05
+- Remove temp file created in mtx-changer script.
+- Make fsf_dev() into a class method.
+06Jul05
+- Modify mtx-changer.in script to return slot:barcode for
+ Volumes that are loaded in the drives.
+- Correct some more places where dev->is_blocked() needs
+ to be checked in dircmd.c in SD.
+- Update doc.
+05Jul05
+- Add code to ensure that reserved but unused volumes
+ are freed.
+- Correct how Volumes are mounted and handled so that the SD
+ does not get stuck if multiple volumes are used (recycling,
+ relabling, ...)
+- Correct bug where you could relabel a volume while it
+ was being acquired -- created chaos.
+04Jul05
+- Correct seg fault caused by open() calling sequence change.
+03Jul05
+- Add new rc-chio-changer script by Rudolf Cejka to
+ examples/autochangers
+- Apply Rudolf's changes to bacula.in
+- Expand the space from 8 to 10 characters in editing
+ file sizes for restore and dir of catalog, otherwise
+ GB sizes are truncated -- fixes bug report.
+- Modify wx-console to know about 10 character widths.
+- Allow decending into top level directory if "recurse=no"
+ is set. Fixes a bug report.
+- Install pthreadVCE.dll when installing console or wx-console
+ on Win32 systems. Fixes bug report.
+02Jul05
+- Tweak dvd-writepart script to prevent door from opening/closing
+ so much.
+- Remove GROUP BY in several PostgreSQL commands to prevent error.
+ Resolves bug report.
+- Ensure that < as first character of filename list is not treated
+ as a directory for restore.
+- Add debug to heartbeat in FD as it seems to go into an
+ infinite loop from time to time during SD failure in DVD writing.
+- Add more debug code to dvd writing.
+- Attempt not to destroy existing fs on DVD.
+30Jun05
+- Detect device mounted for DVD and suppress be sure to
+ mount message after label.
+- Set Cleaning tape status to "Cleaning" and force no
+ MediaType.
+- Get DVD writing working with new standard Bacula open()
+ code.
+- Rename get_filename() to make more sense.
+- Detect "is already mounted on" on mount command so to avoid
+ error if device is already mounted.
+- Eliminated guess_name() code. It may be necessary to
+ add it back later.
+- Eliminate seg fault from printing invalid results.
+- Make dvd_write_part() bool.
+
29Jun05
- Attempt to fix DVD writing by eliminating a number of the
DVD subroutines to simplify.